Merge pull request #349 from tpmanley/feature/updated_smartsense_devices

Added fingerprints/support for new version of multi/moisture/motion sensors

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -0,0 +1,71 @@
+/**
+ *  Ecobee Sensor
+ *
+ *  Copyright 2015 Juan Risso
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Ecobee Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Sensor"
+		capability "Temperature Measurement"
+		capability "Motion Sensor"
+		capability "Refresh"
+		capability "Polling"
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							[value: 31, color: "#153591"],
+							[value: 44, color: "#1e9cbb"],
+							[value: 59, color: "#90d2a7"],
+							[value: 74, color: "#44b621"],
+							[value: 84, color: "#f1d801"],
+							[value: 95, color: "#d04e00"],
+							[value: 96, color: "#bc2323"]
+					]
+			)
+		}
+
+		standardTile("motion", "device.motion") {
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
+		}
+
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main (["temperature","motion"])
+		details(["temperature","motion","refresh"])
+	}
+}
+
+def refresh() {
+	log.debug "refresh..."
+	poll()
+}
+
+void poll() {
+	log.debug "Executing 'poll' using parent SmartApp"
+	parent.pollChildren(this)
+}
+
+//generate custom mobile activity feeds event
+def generateActivityFeedsEvent(notificationMessage) {
+	sendEvent(name: "notificationMessage", value: "$device.displayName $notificationMessage", descriptionText: "$device.displayName $notificationMessage", displayed: true)
+}

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -22,31 +22,31 @@ metadata {
 		capability "Polling"
 		capability "Sensor"
         capability "Refresh"
-        
+
         command "generateEvent"
         command "raiseSetpoint"
         command "lowerSetpoint"
         command "resumeProgram"
         command "switchMode"
-        
+
         attribute "thermostatSetpoint","number"
         attribute "thermostatStatus","string"
 	}
 
 	simulator { }
- 
-		tiles {
+
+    	tiles {
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°', unit:"F",
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
+                backgroundColors:[
+                    [value: 31, color: "#153591"],
+                    [value: 44, color: "#1e9cbb"],
+                    [value: 59, color: "#90d2a7"],
+                    [value: 74, color: "#44b621"],
+                    [value: 84, color: "#f1d801"],
+                    [value: 95, color: "#d04e00"],
+                    [value: 96, color: "#bc2323"]
+                ]
 			)
 		}
 		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
@@ -54,27 +54,27 @@ metadata {
 			state "heat", action:"switchMode",  nextState: "updating", icon: "st.thermostat.heat"
 			state "cool", action:"switchMode",  nextState: "updating", icon: "st.thermostat.cool"
 			state "auto", action:"switchMode",  nextState: "updating", icon: "st.thermostat.auto"
-			state "auxHeatOnly", action:"switchMode", icon: "st.thermostat.emergency-heat"  
-            state "updating", label:"Working", icon: "st.secondary.secondary"  
+			state "auxHeatOnly", action:"switchMode", icon: "st.thermostat.emergency-heat"
+			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
 			state "auto", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "on"
 			state "on", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "off"
-			state "off", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "circulate"           
+			state "off", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "circulate"
 			state "circulate", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "auto"
 		}
-        standardTile("upButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "setpoint", action:"raiseSetpoint", backgroundColor:"#d04e00", icon:"st.thermostat.thermostat-up"
+		standardTile("upButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "setpoint", action:"raiseSetpoint", icon:"st.thermostat.thermostat-up"
 		}
-        valueTile("thermostatSetpoint", "device.thermostatSetpoint", width: 1, height: 1, decoration: "flat") {
-			state "thermostatSetpoint", label:'${currentValue}'
+		valueTile("thermostatSetpoint", "device.thermostatSetpoint", width: 1, height: 1, decoration: "flat") {
+			state "thermostatSetpoint", label:'${currentValue}°'
 		}
 		valueTile("currentStatus", "device.thermostatStatus", height: 1, width: 2, decoration: "flat") {
 			state "thermostatStatus", label:'${currentValue}', backgroundColor:"#ffffff"
-		}    
+		}
 		standardTile("downButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "setpoint", action:"lowerSetpoint", backgroundColor:"#d04e00", icon:"st.thermostat.thermostat-down"
-		}        
+			state "setpoint", action:"lowerSetpoint", icon:"st.thermostat.thermostat-down"
+		}
 		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
 			state "setHeatingSetpoint", action:"thermostat.setHeatingSetpoint", backgroundColor:"#d04e00"
 		}
@@ -91,218 +91,196 @@ metadata {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 		standardTile("resumeProgram", "device.resumeProgram", inactiveLabel: false, decoration: "flat") {
-			state "resume", label:'Resume Program', action:"device.resumeProgram", icon:"st.sonos.play-icon"
+			state "resume", action:"resumeProgram", nextState: "updating", label:'Resume Schedule', icon:"st.samsung.da.oven_ic_send"
+			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		main "temperature"
-        details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "resumeProgram", "refresh"])
+		details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "resumeProgram", "refresh"])
+	}
+
+	preferences {
+		input "holdType", "enum", title: "Hold Type", description: "When changing temperature, use Temporary or Permanent hold (default)", required: false, options:["Temporary", "Permanent"]
 	}
 
 }
 
-/*
-    
-    preferences {
-		input "highTemperature", "number", title: "Auto Mode High Temperature:", defaultValue: 80
-		input "lowTemperature", "number", title: "Auto Mode Low Temperature:", defaultValue: 70
-        input name: "holdType", type: "enum", title: "Hold Type", description: "When changing temperature, use Temporary or Permanent hold", required: true, options:["Temporary", "Permanent"]
-  	}
-    
-*/
-
-
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
 	// TODO: handle '' attribute
- 
+
 }
 
-def refresh()
-{
-  log.debug "refresh called"
-  poll()
-  log.debug "refresh ended"
+def refresh() {
+	log.debug "refresh called"
+	poll()
+	log.debug "refresh ended"
 }
- 
-def go()
-{
-  log.debug "before:go tile tapped"
-  poll()
-  log.debug "after"
-}
- 
+
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-	
+
 	def results = parent.pollChild(this)
-	parseEventData(results)
-	generateStatusEvent()
+	generateEvent(results) //parse received message from parent
 }
- 
-def parseEventData(Map results)
-{
+
+def generateEvent(Map results) {
 	log.debug "parsing data $results"
-	if(results)
-	{
-		results.each { name, value -> 
- 
+	if(results) {
+		results.each { name, value ->
+
 			def linkText = getLinkText(device)
-            def isChange = false
-            def isDisplayed = true
-            
-            if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint") {
-				isChange = isTemperatureStateChange(device, name, value.toString())
-                isDisplayed = isChange
-                   
-				sendEvent(
-					name: name,
-					value: value,
-					unit: "F",
-					linkText: linkText,
-					descriptionText: getThermostatDescriptionText(name, value, linkText),
-					handlerName: name,
-					isStateChange: isChange,
-					displayed: isDisplayed)
-                    
-            }
-            else {
-            	isChange = isStateChange(device, name, value.toString())
-                isDisplayed = isChange
-                
-                sendEvent(
-					name: name,
-					value: value.toString(),
-					linkText: linkText,
-					descriptionText: getThermostatDescriptionText(name, value, linkText),
-					handlerName: name,
-					isStateChange: isChange,
-					displayed: isDisplayed)
-                    
-            }
-		}                                   									
-		generateSetpointEvent ()  
-        generateStatusEvent ()
-	}
-}
+			def isChange = false
+			def isDisplayed = true
+			def event = [name: name, linkText: linkText, descriptionText: getThermostatDescriptionText(name, value, linkText),
+			handlerName: name]
 
-void generateEvent(Map results)
-{
-	log.debug "parsing data $results"
-	if(results)
-	{
-		results.each { name, value -> 
-        
- 			def linkText = getLinkText(device)
-            def isChange = false
-            def isDisplayed = true
-            
-            if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint") {
+			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint") {
+				def sendValue = value? convertTemperatureIfNeeded(value.toDouble(), "F", 1): value //API return temperature value in F
 				isChange = isTemperatureStateChange(device, name, value.toString())
-                isDisplayed = isChange
-                   
-				sendEvent(
-					name: name,
-					value: value,
-					unit: "F",
-					linkText: linkText,
-					descriptionText: getThermostatDescriptionText(name, value, linkText),
-					handlerName: name,
-					isStateChange: isChange,
-					displayed: isDisplayed)                                    									 
-            }
-            else {
-            	isChange = isStateChange(device, name, value.toString())
-                isDisplayed = isChange
-                
-                sendEvent(
-					name: name,
-					value: value.toString(),
-					linkText: linkText,
-					descriptionText: getThermostatDescriptionText(name, value, linkText),
-					handlerName: name,
-					isStateChange: isChange,
-					displayed: isDisplayed)
-                    
-            }
+				isDisplayed = isChange
+				event << [value: sendValue, isStateChange: isChange, displayed: isDisplayed]
+			} else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
+				isChange = isStateChange(device, name, value.toString())
+				event << [value: value.toString(), isStateChange: isChange, displayed: false]
+			}  else {
+				isChange = isStateChange(device, name, value.toString())
+				isDisplayed = isChange
+				event << [value: value.toString(), isStateChange: isChange, displayed: isDisplayed]
+			}
+			sendEvent(event)
 		}
-		generateSetpointEvent () 
-        generateStatusEvent()
+		generateSetpointEvent ()
+		generateStatusEvent ()
 	}
 }
- 
-private getThermostatDescriptionText(name, value, linkText)
-{
-	if(name == "temperature")
-	{
-		return "$linkText was $value°F"
+
+//return descriptionText to be shown on mobile activity feed
+private getThermostatDescriptionText(name, value, linkText) {
+	if(name == "temperature") {
+		return "$linkText temperature is $value°F"
+
+	} else if(name == "heatingSetpoint") {
+		return "heating setpoint is $value°F"
+
+	} else if(name == "coolingSetpoint"){
+		return "cooling setpoint is $value°F"
+
+	} else if (name == "thermostatMode") {
+		return "thermostat mode is ${value}"
+
+	} else if (name == "thermostatFanMode") {
+		return "thermostat fan mode is ${value}"
+
+	} else {
+		return "${name} = ${value}"
 	}
-	else if(name == "heatingSetpoint")
-	{
-		return "latest heating setpoint was $value°F"
+}
+
+void setHeatingSetpoint(setpoint) {
+	setHeatingSetpoint(setpoint.toDouble())
+}
+
+void setHeatingSetpoint(Double setpoint) {
+//    def mode = device.currentValue("thermostatMode")
+	def heatingSetpoint = setpoint
+	def coolingSetpoint = device.currentValue("coolingSetpoint").toDouble()
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+
+	//enforce limits of heatingSetpoint
+	if (heatingSetpoint > 79) {
+		heatingSetpoint = 79
+	} else if (heatingSetpoint < 45) {
+		heatingSetpoint = 45
 	}
-	else if(name == "coolingSetpoint")
-	{
-		return "latest cooling setpoint was $value°F"
+
+	//enforce limits of heatingSetpoint vs coolingSetpoint
+	if (heatingSetpoint >= coolingSetpoint) {
+		coolingSetpoint = heatingSetpoint
+	}
+
+	log.debug "Sending setHeatingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
+
+	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+	if (parent.setHold (this, heatingSetpoint,  coolingSetpoint, deviceId, sendHoldType)) {
+		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
+		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
+		log.debug "Done setHeatingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
+		generateSetpointEvent()
+		generateStatusEvent()
+	} else {
+		log.error "Error setHeatingSetpoint(setpoint)" //This error is handled by the connect app
 	}
-    else if (name == "thermostatMode")
-    {
-        return "thermostat mode is ${value}"
-    }
-    else
-    {
-        return "${name} = ${value}"
-    }
 }
 
-
-void setHeatingSetpoint(degreesF) {
-	setHeatingSetpoint(degreesF.toDouble())
+void setCoolingSetpoint(setpoint) {
+	setCoolingSetpoint(setpoint.toDouble())
 }
 
-void setHeatingSetpoint(Double degreesF) {
-	log.debug "setHeatingSetpoint({$degreesF})"
-	sendEvent("name":"heatingSetpoint", "value":degreesF)
-	Double coolingSetpoint = device.currentValue("coolingSetpoint")
-	log.debug "coolingSetpoint: $coolingSetpoint"
-	parent.setHold(this, degreesF, coolingSetpoint)
+void setCoolingSetpoint(Double setpoint) {
+//    def mode = device.currentValue("thermostatMode")
+	def heatingSetpoint = device.currentValue("heatingSetpoint").toDouble()
+	def coolingSetpoint = setpoint
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+
+	if (coolingSetpoint > 92) {
+		coolingSetpoint = 92
+	} else if (coolingSetpoint < 65) {
+		coolingSetpoint = 65
+	}
+
+	//enforce limits of heatingSetpoint vs coolingSetpoint
+	if (heatingSetpoint >= coolingSetpoint) {
+		heatingSetpoint = coolingSetpoint
+	}
+
+	log.debug "Sending setCoolingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
+
+	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+	if (parent.setHold (this, heatingSetpoint,  coolingSetpoint, deviceId, sendHoldType)) {
+		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
+		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
+		log.debug "Done setCoolingSetpoint>> coolingSetpoint = ${coolingSetpoint}, heatingSetpoint = ${heatingSetpoint}"
+		generateSetpointEvent()
+		generateStatusEvent()
+	} else {
+		log.error "Error setCoolingSetpoint(setpoint)" //This error is handled by the connect app
+	}
 }
 
-void setCoolingSetpoint(degreesF) {
-	setCoolingSetpoint(degreesF.toDouble())
-}
+void resumeProgram() {
 
-void setCoolingSetpoint(Double degreesF) {
-	log.debug "setCoolingSetpoint({$degreesF})"
-	sendEvent("name":"coolingSetpoint", "value":degreesF)
-	Double heatingSetpoint = device.currentValue("heatingSetpoint")
-	parent.setHold(this, heatingSetpoint, degreesF)
-}
+	log.debug "resumeProgram() is called"
+	sendEvent("name":"thermostatStatus", "value":"resuming schedule", "description":statusText, displayed: false)
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.resumeProgram(this, deviceId)) {
+		sendEvent("name":"thermostatStatus", "value":"setpoint is updating", "description":statusText, displayed: false)
+		runIn(5, "poll")
+		log.debug "resumeProgram() is done"
+		sendEvent("name":"resumeProgram", "value":"resume", descriptionText: "resumeProgram is done", displayed: false, isStateChange: true)
+	} else {
+		sendEvent("name":"thermostatStatus", "value":"failed resume click refresh", "description":statusText, displayed: false)
+		log.error "Error resumeProgram() check parent.resumeProgram(this, deviceId)"
+	}
 
-def configure() {
-	
-}
-
-def resumeProgram() {
-	parent.resumeProgram(this)
 }
 
 def modes() {
 	if (state.modes) {
-        log.debug "Modes = ${state.modes}"
-    	return state.modes
-    }
-    else {
-    	state.modes = parent.availableModes(this)
-        log.debug "Modes = ${state.modes}"        
-        return state.modes
-    }
+		log.debug "Modes = ${state.modes}"
+		return state.modes
+	}
+	else {
+		state.modes = parent.availableModes(this)
+		log.debug "Modes = ${state.modes}"
+		return state.modes
+	}
 }
 
 def fanModes() {
 	["off", "on", "auto", "circulate"]
 }
 
-
 def switchMode() {
 	log.debug "in switchMode"
 	def currentMode = device.currentState("thermostatMode")?.value
@@ -314,7 +292,7 @@ def switchMode() {
 }
 
 def switchToMode(nextMode) {
-    log.debug "In switchToMode = ${nextMode}"
+	log.debug "In switchToMode = ${nextMode}"
 	if (nextMode in modes()) {
 		state.lastTriedMode = nextMode
 		"$nextMode"()
@@ -376,300 +354,326 @@ def getDataByName(String name) {
 
 def setThermostatMode(String value) {
 	log.debug "setThermostatMode({$value})"
-	
+
 }
 
 def setThermostatFanMode(String value) {
 
 	log.debug "setThermostatFanMode({$value})"
-	
+
 }
 
 def generateModeEvent(mode) {
-
-   sendEvent(name: "thermostatMode", value: mode, descriptionText: "$device.displayName is in ${mode} mode", displayed: true, isStateChange: true)
-
+	sendEvent(name: "thermostatMode", value: mode, descriptionText: "$device.displayName is in ${mode} mode", displayed: true)
 }
 
 def generateFanModeEvent(fanMode) {
-
-   sendEvent(name: "thermostatFanMode", value: fanMode, descriptionText: "$device.displayName fan is in ${mode} mode", displayed: true, isStateChange: true)
-
+	sendEvent(name: "thermostatFanMode", value: fanMode, descriptionText: "$device.displayName fan is in ${mode} mode", displayed: true)
 }
 
 def generateOperatingStateEvent(operatingState) {
-
-   sendEvent(name: "thermostatOperatingState", value: operatingState, descriptionText: "$device.displayName is ${operatingState}", displayed: true, isStateChange: true)
-
+	sendEvent(name: "thermostatOperatingState", value: operatingState, descriptionText: "$device.displayName is ${operatingState}", displayed: true)
 }
 
 def off() {
 	log.debug "off"
-	generateModeEvent("off")     
-    if (parent.setMode (this,"off"))
-        generateModeEvent("off")
-    else {
-       	log.debug "Error setting new mode." 
-    	def currentMode = device.currentState("thermostatMode")?.value
-        generateModeEvent(currentMode) // reset the tile back
-    }
-    generateSetpointEvent()
-    generateStatusEvent()   
-	
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.setMode (this,"off", deviceId))
+		generateModeEvent("off")
+	else {
+		log.debug "Error setting new mode."
+		def currentMode = device.currentState("thermostatMode")?.value
+		generateModeEvent(currentMode) // reset the tile back
+	}
+	generateSetpointEvent()
+	generateStatusEvent()
 }
 
 def heat() {
 	log.debug "heat"
-	generateModeEvent("heat")    
-    if (parent.setMode (this,"heat"))
-        generateModeEvent("heat")
-    else {
-       	log.debug "Error setting new mode." 
-    	def currentMode = device.currentState("thermostatMode")?.value
-        generateModeEvent(currentMode) // reset the tile back
-    }
-    generateSetpointEvent()    
-    generateStatusEvent()   
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.setMode (this,"heat", deviceId))
+		generateModeEvent("heat")
+	else {
+		log.debug "Error setting new mode."
+		def currentMode = device.currentState("thermostatMode")?.value
+		generateModeEvent(currentMode) // reset the tile back
+	}
+	generateSetpointEvent()
+	generateStatusEvent()
 }
 
 def auxHeatOnly() {
 	log.debug "auxHeatOnly"
-    generateModeEvent("auxHeatOnly")    
-    if (parent.setMode (this,"auxHeatOnly"))
-        generateModeEvent("auxHeatOnly")
-    else {
-       	log.debug "Error setting new mode." 
-    	def currentMode = device.currentState("thermostatMode")?.value
-        generateModeEvent(currentMode) // reset the tile back
-    }
-    generateSetpointEvent()    
-    generateStatusEvent()  
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.setMode (this,"auxHeatOnly", deviceId))
+		generateModeEvent("auxHeatOnly")
+	else {
+		log.debug "Error setting new mode."
+		def currentMode = device.currentState("thermostatMode")?.value
+		generateModeEvent(currentMode) // reset the tile back
+	}
+	generateSetpointEvent()
+	generateStatusEvent()
 }
 
 def cool() {
 	log.debug "cool"
-    generateModeEvent("cool")
-    if (parent.setMode (this,"cool"))
-        generateModeEvent("cool")
-    else {
-       	log.debug "Error setting new mode." 
-    	def currentMode = device.currentState("thermostatMode")?.value
-        generateModeEvent(currentMode) // reset the tile back
-    }
-    generateSetpointEvent()    
-    generateStatusEvent()   
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.setMode (this,"cool", deviceId))
+		generateModeEvent("cool")
+	else {
+		log.debug "Error setting new mode."
+		def currentMode = device.currentState("thermostatMode")?.value
+		generateModeEvent(currentMode) // reset the tile back
+	}
+	generateSetpointEvent()
+	generateStatusEvent()
 }
 
 def auto() {
 	log.debug "auto"
-    generateModeEvent("auto")
-    if (parent.setMode (this,"auto"))
-        generateModeEvent("auto")
-    else {
-       	log.debug "Error setting new mode." 
-    	def currentMode = device.currentState("thermostatMode")?.value
-        generateModeEvent(currentMode) // reset the tile back
-    }
-    generateSetpointEvent()    
-    generateStatusEvent()  
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.setMode (this,"auto", deviceId))
+		generateModeEvent("auto")
+	else {
+		log.debug "Error setting new mode."
+		def currentMode = device.currentState("thermostatMode")?.value
+		generateModeEvent(currentMode) // reset the tile back
+	}
+	generateSetpointEvent()
+	generateStatusEvent()
 }
 
 def fanOn() {
 	log.debug "fanOn"
-    parent.setFanMode (this,"on")
-	
+//    parent.setFanMode (this,"on")
+
 }
 
 def fanAuto() {
 	log.debug "fanAuto"
-   	parent.setFanMode (this,"auto")    
-	
+//    parent.setFanMode (this,"auto")
+
 }
 
 def fanCirculate() {
 	log.debug "fanCirculate"
-    parent.setFanMode (this,"circulate")
-	
+//    parent.setFanMode (this,"circulate")
+
 }
 
 def fanOff() {
 	log.debug "fanOff"
-    parent.setFanMode (this,"off")
-	
+//    parent.setFanMode (this,"off")
+
 }
 
 def generateSetpointEvent() {
 
-   	log.debug "Generate SetPoint Event"
+	log.debug "Generate SetPoint Event"
 
 	def mode = device.currentValue("thermostatMode")
-    log.debug "Current Mode = ${mode}" 
+	log.debug "Current Mode = ${mode}"
 
-    def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-    log.debug "Heating Setpoint = ${heatingSetpoint}"
+	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+	log.debug "Heating Setpoint = ${heatingSetpoint}"
 
 	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
-    log.debug "Cooling Setpoint = ${coolingSetpoint}"
-    
-    if (mode == "heat") {
-        
-        sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString()+"°")                       
-        
-    }
-    else if (mode == "cool") {
-        
-        sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString()+"°")     
+	log.debug "Cooling Setpoint = ${coolingSetpoint}"
 
-    } else if (mode == "auto") {
-        
-        sendEvent("name":"thermostatSetpoint", "value":"Auto")
+	if (mode == "heat") {
 
-    } else if (mode == "off") {
-            
-        sendEvent("name":"thermostatSetpoint", "value":"Off")    
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString())
 
-    } else if (mode == "emergencyHeat") {
-        
-        sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString()+"°")           
+	}
+	else if (mode == "cool") {
 
-    }
+		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString())
+
+	} else if (mode == "auto") {
+
+		sendEvent("name":"thermostatSetpoint", "value":"Auto")
+
+	} else if (mode == "off") {
+
+		sendEvent("name":"thermostatSetpoint", "value":"Off")
+
+	} else if (mode == "emergencyHeat") {
+
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString())
+
+	}
 
 }
 
 void raiseSetpoint() {
-
-   	log.debug "Raise SetPoint"
-    
 	def mode = device.currentValue("thermostatMode")
-    def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-    def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
-    
-    log.debug "Current Mode = ${mode}"
-    
-    if (mode == "heat") {
-        
-        heatingSetpoint++
-        
-        if (heatingSetpoint > 99)
-           heatingSetpoint = 99
-        
-        sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString()+"°")        
-        sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)               
-        
-        parent.setHold (this, heatingSetpoint, coolingSetpoint)
-        
-        log.debug "New Heating Setpoint = ${heatingSetpoint}"
-        
-    }
-    else if (mode == "cool") {
-                
-        coolingSetpoint++
-        
-        if (coolingSetpoint > 99)
-            coolingSetpoint = 99
-        
-        sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString()+"°")
-        sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)       
-        
-        parent.setHold (this, heatingSetpoint, coolingSetpoint)
-        
-        log.debug "New Cooling Setpoint = ${coolingSetpoint}"        
-        
-    }
-    generateStatusEvent()
+	def targetvalue
 
+	if (mode == "off" || mode == "auto") {
+		log.warn "this mode: $mode does not allow raiseSetpoint"
+	} else {
+		def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+		def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+		def thermostatSetpoint = device.currentValue("thermostatSetpoint").toInteger()
+		log.debug "raiseSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
+
+		if (device.latestState('thermostatSetpoint')) {
+			targetvalue = device.latestState('thermostatSetpoint').value as Integer
+		} else {
+			targetvalue = 0
+		}
+		targetvalue = targetvalue + 1
+
+		if (mode == "heat" && targetvalue > 79) {
+			targetvalue = 79
+		} else if (mode == "cool" && targetvalue > 92) {
+			targetvalue = 92
+		}
+
+		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
+		log.info "In mode $mode raiseSetpoint() to $targetvalue"
+
+		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
+	}
 }
 
-
+//called by tile when user hit raise temperature button on UI
 void lowerSetpoint() {
-   	log.debug "Lower SetPoint"
-    
 	def mode = device.currentValue("thermostatMode")
-    def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-    def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
-    
-    log.debug "Current Mode = ${mode}, Current Heating Setpoint = ${heatingSetpoint}, Current Cooling Setpoint = ${coolingSetpoint}"
-    
-    if (mode == "heat" || mode == "emergencyHeat") {
-        
-        heatingSetpoint--  
-        
-        if (heatingSetpoint < 32)
-           heatingSetpoint = 32
+	def targetvalue
 
-        sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString()+"°")        
-        sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
-        
-        parent.setHold (this, heatingSetpoint, coolingSetpoint)
-        
-        log.debug "New Heating Setpoint = ${heatingSetpoint}"
-        
-    }
-    else if (mode == "cool") {
-                
-        coolingSetpoint--
-        
-        if (coolingSetpoint < 32)
-           coolingSetpoint = 32
-        
-        sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString()+"°")
-        sendEvent("name":"coolingSetpoint", "value":coolingSetpoint) 
-        
-        parent.setHold (this, heatingSetpoint, coolingSetpoint)
-        
-        log.debug "New Cooling Setpoint = ${coolingSetpoint}"
-        
-    }
-    generateStatusEvent()
+	if (mode == "off" || mode == "auto") {
+		log.warn "this mode: $mode does not allow lowerSetpoint"
+	} else {
+		def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+		def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+		def thermostatSetpoint = device.currentValue("thermostatSetpoint").toInteger()
+		log.debug "lowerSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
+		if (device.latestState('thermostatSetpoint')) {
+			targetvalue = device.latestState('thermostatSetpoint').value as Integer
+		} else {
+			targetvalue = 0
+		}
+		targetvalue = targetvalue - 1
+
+		if (mode == "heat" && targetvalue.toInteger() < 45) {
+			targetvalue = 45
+		} else if (mode == "cool" && targetvalue.toInteger() < 65) {
+			targetvalue = 65
+		}
+
+		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
+		log.info "In mode $mode lowerSetpoint() to $targetvalue"
+
+		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
+	}
+}
+
+//called by raiseSetpoint() and lowerSetpoint()
+void alterSetpoint(temp) {
+
+	def mode = device.currentValue("thermostatMode")
+	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+
+	def targetHeatingSetpoint
+	def targetCoolingSetpoint
+
+	//step1: check thermostatMode, enforce limits before sending request to cloud
+	if (mode == "heat"){
+		if (temp.value > coolingSetpoint){
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = temp.value
+		} else {
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = coolingSetpoint
+		}
+	} else if (mode == "cool") {
+		//enforce limits before sending request to cloud
+		if (temp.value < heatingSetpoint){
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = temp.value
+		} else {
+			targetHeatingSetpoint = heatingSetpoint
+			targetCoolingSetpoint = temp.value
+		}
+	}
+
+	log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to ${targetHeatingSetpoint} " +
+			"coolingSetpoint to ${targetCoolingSetpoint} with holdType : ${holdType}"
+
+	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+	//step2: call parent.setHold to send http request to 3rd party cloud
+	if (parent.setHold(this, targetHeatingSetpoint, targetCoolingSetpoint, deviceId, sendHoldType)) {
+		sendEvent("name": "thermostatSetpoint", "value": temp.value.toString(), displayed: false)
+		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint)
+		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint)
+		log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+	} else {
+		log.error "Error alterSetpoint()"
+		if (mode == "heat"){
+			sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+		} else if (mode == "cool") {
+			sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+		}
+	}
+	generateStatusEvent()
 }
 
 def generateStatusEvent() {
 
 	def mode = device.currentValue("thermostatMode")
-    def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-    def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()   
-    def temperature = device.currentValue("temperature").toInteger()  
-    
-    def statusText
-    
-    log.debug "Generate Status Event for Mode = ${mode}"
-    log.debug "Temperature = ${temperature}"
-    log.debug "Heating set point = ${heatingSetpoint}"
-    log.debug "Cooling set point = ${coolingSetpoint}"
-    log.debug "HVAC Mode = ${mode}"
-    
-    if (mode == "heat") {
-    
-    	if (temperature >= heatingSetpoint)
-        	statusText = "Right Now: Idle"
-        else
-    		statusText = "Heating to ${heatingSetpoint}° F"
-        
-    } else if (mode == "cool") {
-    
-        if (temperature <= coolingSetpoint)
-        	statusText = "Right Now: Idle"
-        else
-    		statusText = "Cooling to ${coolingSetpoint}° F"
-        
-    } else if (mode == "auto") {
-        
-    	statusText = "Right Now: Auto"
-        
-    } else if (mode == "off") {
-    
-    	statusText = "Right Now: Off"
-        
-    } else if (mode == "emergencyHeat") {
-    
-    	statusText = "Emergency Heat"
-        
-    } else {
-    
-        statusText = "?"
-        
-    }
-    log.debug "Generate Status Event = ${statusText}"
-    sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true, isStateChange: true)
+	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+	def temperature = device.currentValue("temperature").toInteger()
+
+	def statusText
+
+	log.debug "Generate Status Event for Mode = ${mode}"
+	log.debug "Temperature = ${temperature}"
+	log.debug "Heating set point = ${heatingSetpoint}"
+	log.debug "Cooling set point = ${coolingSetpoint}"
+	log.debug "HVAC Mode = ${mode}"
+
+	if (mode == "heat") {
+
+		if (temperature >= heatingSetpoint)
+			statusText = "Right Now: Idle"
+		else
+			statusText = "Heating to ${heatingSetpoint}° F"
+
+	} else if (mode == "cool") {
+
+		if (temperature <= coolingSetpoint)
+			statusText = "Right Now: Idle"
+		else
+			statusText = "Cooling to ${coolingSetpoint}° F"
+
+	} else if (mode == "auto") {
+
+		statusText = "Right Now: Auto"
+
+	} else if (mode == "off") {
+
+		statusText = "Right Now: Off"
+
+	} else if (mode == "emergencyHeat") {
+
+		statusText = "Emergency Heat"
+
+	} else {
+
+		statusText = "?"
+
+	}
+	log.debug "Generate Status Event = ${statusText}"
+	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
 }
 
+//generate custom mobile activity feeds event
+def generateActivityFeedsEvent(notificationMessage) {
+	sendEvent(name: "notificationMessage", value: "$device.displayName $notificationMessage", descriptionText: "$device.displayName $notificationMessage", displayed: true)
+}

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -27,7 +27,7 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
-
+		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}
  
 	simulator {

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -29,6 +29,7 @@ metadata {
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
+        fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
 	}
 
 	simulator {
@@ -352,4 +353,4 @@ private byte[] reverseArray(byte[] array) {
         i++;
     }
     return array
-}
+}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -30,6 +30,7 @@
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
+        fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
 
 		attribute "status", "string"
  	}
@@ -115,31 +116,30 @@
 	}
  }
 
- def parse(String description) {
- 	
- 	Map map = [:]
- 	if (description?.startsWith('catchall:')) {
- 		map = parseCatchAllMessage(description)
- 	}
- 	else if (description?.startsWith('read attr -')) {
- 		map = parseReportAttributeMessage(description)
- 	}
+def parse(String description) {
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
     else if (description?.startsWith('temperature: ')) {
- 		map = parseCustomMessage(description)
- 	}
- 	else if (description?.startsWith('zone status')) {
- 		map = parseIasMessage(description)
- 	}
+		map = parseCustomMessage(description)
+	}
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
+	}
 
  	def result = map ? createEvent(map) : null
 
- 	if (description?.startsWith('enroll request')) {
- 		List cmds = enrollResponse()
- 		log.debug "enroll response: ${cmds}"
- 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
- 	}
- 	return result
- }
+	if (description?.startsWith('enroll request')) {
+		List cmds = enrollResponse()
+		log.debug "enroll response: ${cmds}"
+		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+	}
+    else if (description?.startsWith('read attr -')) {
+        result = parseReportAttributeMessage(description).each { createEvent(it) }
+    }
+	return result
+}
 
  private Map parseCatchAllMessage(String description) {
  	Map resultMap = [:]
@@ -178,28 +178,40 @@ private boolean shouldProcessMessage(cluster) {
     return !ignoredMessage
 }
 
-private Map parseReportAttributeMessage(String description) {
+private List parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
-    
-    Map resultMap = [:]
+
+	List result = []
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
-		resultMap = getTemperatureResult(value)
+		result << getTemperatureResult(value)
 	}
 	else if (descMap.cluster == "FC02" && descMap.attrId == "0010") {
-  		resultMap = getAccelerationResult(descMap.value)
+		if (descMap.value.size() == 32) {
+			// value will look like 00ae29001403e2290013001629001201
+			// breaking this apart and swapping byte order where appropriate, this breaks down to:
+			//   X (0x0012) = 0x0016
+			//   Y (0x0013) = 0x03E2
+			//   Z (0x0014) = 0x00AE
+			// note that there is a known bug in that the x,y,z attributes are interpreted in the wrong order
+			// this will be fixed in a future update
+			def threeAxisAttributes = descMap.value[0..-9]
+			result << parseAxis(threeAxisAttributes)
+			descMap.value = descMap.value[-2..-1]
+		}
+        result << getAccelerationResult(descMap.value)
 	}
-    else if (descMap.cluster == "FC02" && descMap.attrId == "0012") {
-  		resultMap = parseAxis(descMap.value)
+	else if (descMap.cluster == "FC02" && descMap.attrId == "0012") {
+        result << parseAxis(descMap.value)
 	}
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
 
-	return resultMap
+	return result
 }
 
 private Map parseCustomMessage(String description) {
@@ -363,26 +375,26 @@ def getTemperature(value) {
         
         /* sensitivity - default value (8) */
         
-        "zcl mfg-code 0x104E", "delay 200",
+        "zcl mfg-code ${manufacturerCode}", "delay 200",
         "zcl global write 0xFC02 0 0x20 {02}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 400",
 
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
 
-        "zcl mfg-code 0x104E", "delay 200",
+        "zcl mfg-code ${manufacturerCode}", "delay 200",
         "zcl global read 0xFC02 0x0010",
         "send 0x${device.deviceNetworkId} 1 1","delay 400",
         
-        "zcl mfg-code 0x104E", "delay 200",
+        "zcl mfg-code ${manufacturerCode}", "delay 200",
         "zcl global read 0xFC02 0x0012",
         "send 0x${device.deviceNetworkId} 1 1","delay 400",
         
-        "zcl mfg-code 0x104E", "delay 200",
+        "zcl mfg-code ${manufacturerCode}", "delay 200",
         "zcl global read 0xFC02 0x0013",
         "send 0x${device.deviceNetworkId} 1 1","delay 400",
         
-        "zcl mfg-code 0x104E", "delay 200",
+        "zcl mfg-code ${manufacturerCode}", "delay 200",
         "zcl global read 0xFC02 0x0014",
         "send 0x${device.deviceNetworkId} 1 1", "delay 400"
 		]
@@ -409,19 +421,19 @@ def getTemperature(value) {
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code 0x104E", 
+		"zcl mfg-code ${manufacturerCode}",
 		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code 0x104E",
+		"zcl mfg-code ${manufacturerCode}",
 		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code 0x104E",
+		"zcl mfg-code ${manufacturerCode}",
 		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code 0x104E",
+		"zcl mfg-code ${manufacturerCode}",
 		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 
@@ -519,6 +531,14 @@ private Map getXyzResult(results, description) {
 	]
 }
 
+private getManufacturerCode() {
+	if (device.getDataValue("manufacturer") == "SmartThings") {
+		return "0x110A"
+	} else {
+		return "0x104E"
+	}
+}
+
 private hexToInt(value) {
 	new BigInteger(value, 16)
 }

devicetypes/smartthings/wattvision.src/wattvision.groovy

@@ -33,14 +33,14 @@ metadata {
 			state "power", label: '${currentValue} W'
 		}
 
-		tile(name: "powerChart", attribute: "powerContent", type: "HTML", url: '${currentValue}', width: 3, height: 2) { }
+		htmlTile(name: "powerContent", attribute: "powerContent", type: "HTML", whitelist: "www.wattvision.com" , url: '${currentValue}', width: 3, height: 2)
 
 		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
 			state "default", label: '', action: "refresh.refresh", icon: "st.secondary.refresh"
 		}
 
 		main "power"
-		details(["powerChart", "power", "refresh"])
+		details(["powerContent", "power", "refresh"])
 
 	}
 }
@@ -74,10 +74,10 @@ public addWattvisionData(json) {
 
 	log.trace "Adding data from Wattvision"
 
-	def data = json.data
+	def data = parseJson(json.data.toString())
 	def units = json.units ?: "watts"
 
-	if (data) {
+	if (data.size() > 0) {
 		def latestData = data[-1]
 		data.each {
 			sendPowerEvent(it.t, it.v, units, (latestData == it))
@@ -103,3 +103,7 @@ private sendPowerEvent(time, value, units, isLatest = false) {
 	sendEvent(eventData)
 
 }
+
+def parseJson(String s) {
+	new groovy.json.JsonSlurper().parseText(s)
+}

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -115,6 +115,10 @@ def strobe() {
 	]
 }
 
+def both() {
+	on()
+}
+
 def refresh() {
 	log.debug "sending battery refresh command"
 	zwave.batteryV1.batteryGet().format()

smartapps/smartthings/bose-soundtouch-control.src/bose-soundtouch-control.groovy

@@ -0,0 +1,341 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Bose® SoundTouch® Control
+ *
+ *  Author: SmartThings & Joe Geiger
+ *
+ *  Date: 2015-30-09
+ */
+definition(
+    name: "Bose® SoundTouch® Control",
+    namespace: "smartthings",
+    author: "SmartThings & Joe Geiger",
+    description: "Control your Bose® SoundTouch® when certain actions take place in your home.",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png"
+)
+
+preferences {
+	page(name: "mainPage", title: "Control your Bose® SoundTouch® when something happens", install: true, uninstall: true)
+	page(name: "timeIntervalInput", title: "Only during a certain time") {
+		section {
+			input "starting", "time", title: "Starting", required: false
+			input "ending", "time", title: "Ending", required: false
+		}
+	}
+}
+
+def mainPage() {
+	dynamicPage(name: "mainPage") {
+		def anythingSet = anythingSet()
+		if (anythingSet) {
+			section("When..."){
+				ifSet "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true
+				ifSet "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
+				ifSet "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
+				ifSet "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
+				ifSet "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true
+				ifSet "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true
+				ifSet "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true
+				ifSet "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true
+				ifSet "smoke", "capability.smokeDetector", title: "Smoke Detected", required: false, multiple: true
+				ifSet "water", "capability.waterSensor", title: "Water Sensor Wet", required: false, multiple: true
+				ifSet "button1", "capability.button", title: "Button Press", required:false, multiple:true //remove from production
+				ifSet "triggerModes", "mode", title: "System Changes Mode", required: false, multiple: true
+				ifSet "timeOfDay", "time", title: "At a Scheduled Time", required: false
+			}
+		}
+		section(anythingSet ? "Select additional triggers" : "When...", hideable: anythingSet, hidden: true){
+			ifUnset "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true
+			ifUnset "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
+			ifUnset "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
+			ifUnset "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
+			ifUnset "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true
+			ifUnset "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true
+			ifUnset "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true
+			ifUnset "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true
+			ifUnset "smoke", "capability.smokeDetector", title: "Smoke Detected", required: false, multiple: true
+			ifUnset "water", "capability.waterSensor", title: "Water Sensor Wet", required: false, multiple: true
+			ifUnset "button1", "capability.button", title: "Button Press", required:false, multiple:true //remove from production
+			ifUnset "triggerModes", "mode", title: "System Changes Mode", required: false, multiple: true
+			ifUnset "timeOfDay", "time", title: "At a Scheduled Time", required: false
+		}
+		section("Perform this action"){
+			input "actionType", "enum", title: "Action?", required: true, defaultValue: "play", options: [
+				"Turn On & Play",
+				"Turn Off",
+				"Toggle Play/Pause",
+				"Skip to Next Track",
+				"Skip to Beginning/Previous Track",
+                "Play Preset 1",
+                "Play Preset 2",
+                "Play Preset 3",
+                "Play Preset 4",
+                "Play Preset 5",
+                "Play Preset 6"
+			]
+		}
+		section {
+			input "bose", "capability.musicPlayer", title: "Bose® SoundTouch® music player", required: true
+		}
+		section("More options", hideable: true, hidden: true) {
+			input "volume", "number", title: "Set the volume volume", description: "0-100%", required: false
+			input "frequency", "decimal", title: "Minimum time between actions (defaults to every event)", description: "Minutes", required: false
+			href "timeIntervalInput", title: "Only during a certain time", description: timeLabel ?: "Tap to set", state: timeLabel ? "complete" : "incomplete"
+			input "days", "enum", title: "Only on certain days of the week", multiple: true, required: false,
+				options: ["Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"]
+			if (settings.modes) {
+            	input "modes", "mode", title: "Only when mode is", multiple: true, required: false
+            }
+			input "oncePerDay", "bool", title: "Only once per day", required: false, defaultValue: false
+		}
+		section([mobileOnly:true]) {
+			label title: "Assign a name", required: false
+			mode title: "Set for specific mode(s)"
+		}
+	}
+}
+
+private anythingSet() {
+	for (name in ["motion","contact","contactClosed","acceleration","mySwitch","mySwitchOff","arrivalPresence","departurePresence","smoke","water","button1","triggerModes","timeOfDay"]) {
+		if (settings[name]) {
+			return true
+		}
+	}
+	return false
+}
+
+private ifUnset(Map options, String name, String capability) {
+	if (!settings[name]) {
+		input(options, name, capability)
+	}
+}
+
+private ifSet(Map options, String name, String capability) {
+	if (settings[name]) {
+		input(options, name, capability)
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	subscribeToEvents()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	unschedule()
+	subscribeToEvents()
+}
+
+def subscribeToEvents() {
+	log.trace "subscribeToEvents()"
+	subscribe(app, appTouchHandler)
+	subscribe(contact, "contact.open", eventHandler)
+	subscribe(contactClosed, "contact.closed", eventHandler)
+	subscribe(acceleration, "acceleration.active", eventHandler)
+	subscribe(motion, "motion.active", eventHandler)
+	subscribe(mySwitch, "switch.on", eventHandler)
+	subscribe(mySwitchOff, "switch.off", eventHandler)
+	subscribe(arrivalPresence, "presence.present", eventHandler)
+	subscribe(departurePresence, "presence.not present", eventHandler)
+	subscribe(smoke, "smoke.detected", eventHandler)
+	subscribe(smoke, "smoke.tested", eventHandler)
+	subscribe(smoke, "carbonMonoxide.detected", eventHandler)
+	subscribe(water, "water.wet", eventHandler)
+	subscribe(button1, "button.pushed", eventHandler)
+
+	if (triggerModes) {
+		subscribe(location, modeChangeHandler)
+	}
+
+	if (timeOfDay) {
+		schedule(timeOfDay, scheduledTimeHandler)
+	}
+}
+
+def eventHandler(evt) {
+	if (allOk) {
+		def lastTime = state[frequencyKey(evt)]
+		if (oncePerDayOk(lastTime)) {
+			if (frequency) {
+				if (lastTime == null || now() - lastTime >= frequency * 60000) {
+					takeAction(evt)
+				}
+				else {
+					log.debug "Not taking action because $frequency minutes have not elapsed since last action"
+				}
+			}
+			else {
+				takeAction(evt)
+			}
+		}
+		else {
+			log.debug "Not taking action because it was already taken today"
+		}
+	}
+}
+
+def modeChangeHandler(evt) {
+	log.trace "modeChangeHandler $evt.name: $evt.value ($triggerModes)"
+	if (evt.value in triggerModes) {
+		eventHandler(evt)
+	}
+}
+
+def scheduledTimeHandler() {
+	eventHandler(null)
+}
+
+def appTouchHandler(evt) {
+	takeAction(evt)
+}
+
+private takeAction(evt) {
+	log.debug "takeAction($actionType)"
+	def options = [:]
+	if (volume) {
+		bose.setLevel(volume as Integer)
+		options.delay = 1000
+	}
+
+	switch (actionType) {
+		case "Turn On & Play":
+			options ? bose.on(options) : bose.on()
+			break
+		case "Turn Off":
+			options ? bose.off(options) : bose.off()
+			break
+		case "Toggle Play/Pause":
+			def currentStatus = bose.currentValue("playpause")
+			if (currentStatus == "play") {
+				options ? bose.pause(options) : bose.pause()
+			}
+			else if (currentStatus == "pause") {
+				options ? bose.play(options) : bose.play()
+			}
+			break
+		case "Skip to Next Track":
+			options ? bose.nextTrack(options) : bose.nextTrack()
+			break
+		case "Skip to Beginning/Previous Track":
+			options ? bose.previousTrack(options) : bose.previousTrack()
+			break
+        case "Play Preset 1":
+			options ? bose.preset1(options) : bose.preset1()
+			break
+        case "Play Preset 2":
+			options ? bose.preset2(options) : bose.preset2()
+			break 
+        case "Play Preset 3":
+			options ? bose.preset3(options) : bose.preset3()
+			break
+        case "Play Preset 4":
+			options ? bose.preset4(options) : bose.preset4()
+			break
+        case "Play Preset 5":
+			options ? bose.preset5(options) : bose.preset5()
+			break
+        case "Play Preset 6":
+			options ? bose.preset6(options) : bose.preset6()
+			break
+		default:
+			log.error "Action type '$actionType' not defined"
+	}
+
+	if (frequency) {
+		state.lastActionTimeStamp = now()
+	}
+}
+
+private frequencyKey(evt) {
+	//evt.deviceId ?: evt.value
+	"lastActionTimeStamp"
+}
+
+private dayString(Date date) {
+	def df = new java.text.SimpleDateFormat("yyyy-MM-dd")
+	if (location.timeZone) {
+		df.setTimeZone(location.timeZone)
+	}
+	else {
+		df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
+	}
+	df.format(date)
+}
+
+private oncePerDayOk(Long lastTime) {
+	def result = true
+	if (oncePerDay) {
+		result = lastTime ? dayString(new Date()) != dayString(new Date(lastTime)) : true
+		log.trace "oncePerDayOk = $result"
+	}
+	result
+}
+
+// TODO - centralize somehow
+private getAllOk() {
+	modeOk && daysOk && timeOk
+}
+
+private getModeOk() {
+	def result = !modes || modes.contains(location.mode)
+	log.trace "modeOk = $result"
+	result
+}
+
+private getDaysOk() {
+	def result = true
+	if (days) {
+		def df = new java.text.SimpleDateFormat("EEEE")
+		if (location.timeZone) {
+			df.setTimeZone(location.timeZone)
+		}
+		else {
+			df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
+		}
+		def day = df.format(new Date())
+		result = days.contains(day)
+	}
+	log.trace "daysOk = $result"
+	result
+}
+
+private getTimeOk() {
+	def result = true
+	if (starting && ending) {
+		def currTime = now()
+		def start = timeToday(starting, location?.timeZone).time
+		def stop = timeToday(ending, location?.timeZone).time
+		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
+	}
+	log.trace "timeOk = $result"
+	result
+}
+
+private hhmm(time, fmt = "h:mm a")
+{
+	def t = timeToday(time, location.timeZone)
+	def f = new java.text.SimpleDateFormat(fmt)
+	f.setTimeZone(location.timeZone ?: timeZone(time))
+	f.format(t)
+}
+
+private timeIntervalLabel()
+{
+	(starting && ending) ? hhmm(starting) + "-" + hhmm(ending, "h:mm a z") : ""
+}
+// TODO - End Centralize

smartapps/smartthings/notify-me-when.src/notify-me-when.groovy

@@ -49,6 +49,7 @@ preferences {
 	section("Via a push notification and/or an SMS message"){
         input("recipients", "contact", title: "Send notifications to") {
             input "phone", "phone", title: "Phone Number (for SMS, optional)", required: false
+            paragraph "If outside the US please make sure to enter the proper country code"
             input "pushAndPhone", "enum", title: "Both Push and SMS?", required: false, options: ["Yes", "No"]
         }
 	}