naming revisions

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -371,50 +371,21 @@ def getTemperature(value) {
 
 	def refresh() {
 		log.debug "Refreshing Values "
+		def refreshCmds = [
         
-        def refreshCmds = []
+        /* sensitivity - default value (8) */
         
-		if (device.getDataValue("manufacturer") == "SmartThings") {
-        	
-			log.debug "Refreshing Values for manufacturer: SmartThings "
-         	refreshCmds = refreshCmds + [
+        "zcl mfg-code ${manufacturerCode}", "delay 200",
+        "zcl global write 0xFC02 0 0x20 {02}", "delay 200",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 400",
 
-	            /* These values of Motion Threshold Multiplier(01) and Motion Threshold (D200) 
-	               seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer. 
-	               Separating these out in a separate if-else because I do not want to touch Centralite part 
-	               as of now. 
-	            */
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
 
-	            "zcl mfg-code ${manufacturerCode}", "delay 200",
-	            "zcl global write 0xFC02 0 0x20 {01}", "delay 200",
-	            "send 0x${device.deviceNetworkId} 1 1", "delay 400",
-	            
-	            "zcl mfg-code ${manufacturerCode}", "delay 200",
-	            "zcl global write 0xFC02 2 0x21 {D200}", "delay 200",
-            	"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-                
-            ]
-            
-        
-        } else {
-             refreshCmds = refreshCmds + [
-
-                /* sensitivity - default value (8) */
-	            "zcl mfg-code ${manufacturerCode}", "delay 200",
-                "zcl global write 0xFC02 0 0x20 {02}", "delay 200",
-            	"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-            ]
-        }
-        
-        //Common refresh commands
-        refreshCmds = refreshCmds + [
-            "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-            "st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
-
-            "zcl mfg-code ${manufacturerCode}", "delay 200",
-            "zcl global read 0xFC02 0x0010",
-            "send 0x${device.deviceNetworkId} 1 1","delay 400"
-        ]
+        "zcl mfg-code ${manufacturerCode}", "delay 200",
+        "zcl global read 0xFC02 0x0010",
+        "send 0x${device.deviceNetworkId} 1 1","delay 400"
+	]
 
 		return refreshCmds + enrollResponse()
 	}
@@ -490,34 +461,19 @@ private Map parseAxis(String description) {
 			xyzResults.x = signedX
             log.debug "X Part: ${signedX}"
         }
-        // Y and the Z axes are interchanged between SmartThings's implementation and Centralite's implementation
         else if (part.startsWith("13")) {
 			def unsignedY = hexToInt(part.split("13")[1].trim())
 			def signedY = unsignedY > 32767 ? unsignedY - 65536 : unsignedY
-			if (device.getDataValue("manufacturer") == "SmartThings") {
-                xyzResults.z = -signedY
-                log.debug "Z Part: ${xyzResults.z}"
-                if (garageSensor == "Yes")
-                    garageEvent(xyzResults.z)
-            } 
-            else {
-                xyzResults.y = signedY
-                log.debug "Y Part: ${signedY}"
-            }
+			xyzResults.y = signedY
+            log.debug "Y Part: ${signedY}"
         }
         else if (part.startsWith("14")) {
 			def unsignedZ = hexToInt(part.split("14")[1].trim())
 			def signedZ = unsignedZ > 32767 ? unsignedZ - 65536 : unsignedZ
-			if (device.getDataValue("manufacturer") == "SmartThings") {
-                xyzResults.y = signedZ
-                log.debug "Y Part: ${signedZ}"
-            } else {
-                xyzResults.z = signedZ
-                log.debug "Z Part: ${signedZ}"
-                if (garageSensor == "Yes")
-                    garageEvent(signedZ)
-            
-            }
+			xyzResults.z = signedZ
+            log.debug "Z Part: ${signedZ}"
+			if (garageSensor == "Yes")
+				garageEvent(signedZ)
         }
     }
 
@@ -597,4 +553,3 @@ private byte[] reverseArray(byte[] array) {
 	return array
 }
 
-

devicetypes/smartthings/testing/simulated-media-player.src/simulated-media-player.groovy

@@ -0,0 +1,119 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+ metadata {
+	definition (name: "Simulated Media Player", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Actuator"
+		capability "Switch"
+		capability "Refresh"
+		capability "Sensor"
+		capability "Music Player"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name: "mediaMulti", type:"mediaPlayer", width:6, height:4) {
+			tileAttribute("device.status", key: "PRIMARY_CONTROL") {
+				attributeState("paused", label:"Paused",)
+				attributeState("playing", label:"Playing")
+				attributeState("stopped", label:"Stopped")
+			}
+			tileAttribute("device.status", key: "MEDIA_STATUS") {
+				attributeState("paused", label:"Paused", action:"music Player.play", nextState: "playing")
+				attributeState("playing", label:"Playing", action:"music Player.pause", nextState: "paused")
+				attributeState("stopped", label:"Stopped", action:"music Player.play", nextState: "playing")
+			}
+			tileAttribute("device.status", key: "PREVIOUS_TRACK") {
+				attributeState("default", action:"music Player.previousTrack")
+			}
+			tileAttribute("device.status", key: "NEXT_TRACK") {
+				attributeState("default", action:"music Player.nextTrack")
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState("level", action:"music Player.setLevel")
+			}
+			tileAttribute ("device.mute", key: "MEDIA_MUTED") {
+				attributeState("unmuted", action:"music Player.mute", nextState: "muted")
+				attributeState("muted", action:"music Player.unmute", nextState: "unmuted")
+			}
+			tileAttribute("device.trackDescription", key: "MARQUEE") {
+				attributeState("default", label:"${currentValue}")
+			}
+		}
+
+		main "mediaMulti"
+		details(["mediaMulti"])
+	}
+}
+
+def installed() {
+	state.tracks = [
+		"Gangnam Style (강남스타일)\nPSY\nPsy 6 (Six Rules), Part 1",
+		"Careless Whisper\nWham!\nMake It Big",
+		"Never Gonna Give You Up\nRick Astley\nWhenever You Need Somebody",
+		"Shake It Off\nTaylor Swift\n1989",
+		"Ironic\nAlanis Morissette\nJagged Little Pill",
+		"Hotline Bling\nDrake\nHotline Bling - Single"
+	]
+	state.currentTrack = 0
+
+	sendEvent(name: "level", value: 72)
+	sendEvent(name: "mute", value: "unmuted")
+	sendEvent(name: "status", value: "stopped")
+}
+
+def parse(description) {
+	// No parsing will happen with this simulated device.
+}
+
+def play() {
+	sendEvent(name: "status", value: "playing")
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def pause() {
+	sendEvent(name: "status", value: "paused")
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def stop() {
+	sendEvent(name: "status", value: "stopped")
+}
+
+def previousTrack() {
+	state.currentTrack = state.currentTrack - 1
+	if (state.currentTrack < 0)
+		state.currentTrack = state.tracks.size()-1
+
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def nextTrack() {
+	state.currentTrack = state.currentTrack + 1
+	if (state.currentTrack == state.tracks.size())
+		state.currentTrack = 0
+
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def mute() {
+	sendEvent(name: "mute", value: "muted")
+}
+
+def unmute() {
+	sendEvent(name: "mute", value: "unmuted")
+}
+
+def setLevel(level) {
+	sendEvent(name: "level", value: level)
+}

devicetypes/timevalve-gaslock-t-08/timevalve-smart.src/timevalve-smart.groovy

@@ -1,243 +0,0 @@
-metadata {
-        definition (name: "Timevalve Smart", namespace: "timevalve.gaslock.t-08", author: "ruinnel") {
-                capability "Valve"
-                capability "Refresh"
-                capability "Battery"
-                capability "Temperature Measurement"
-                
-                command "setRemaining"
-                command "setTimeout"
-                command "setTimeout10"
-                command "setTimeout20"
-                command "setTimeout30"
-                command "setTimeout40"
-                
-                command "remainingLevel"
-                
-                attribute "remaining", "number"
-                attribute "remainingText", "String"
-                attribute "timeout", "number"
-                
-                //raw desc : 0 0 0x1006 0 0 0 7 0x5E 0x86 0x72 0x5A 0x73 0x98 0x80
-                //fingerprint deviceId:"0x1006", inClusters:"0x5E, 0x86, 0x72, 0x5A, 0x73, 0x98, 0x80"
-        }
-
-        tiles (scale: 2) {
-        	multiAttributeTile(name:"statusTile", type:"generic", width:6, height:4) {
-            	tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
-	            	attributeState "open", label: '${name}', action: "close", icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-	            	attributeState "closed", label:'${name}', action: "", icon:"st.contact.contact.closed", backgroundColor:"#79b821"
-    	        }
-                tileAttribute("device.remainingText", key: "SECONDARY_CONTROL") {
-	            	attributeState "open", label: '${currentValue}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-	            	attributeState "closed", label:'', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
-    	        }
-            }
-            
-            standardTile("refreshTile", "command.refresh", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-                state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-            }
-            
-            controlTile("remainingSliderTile", "device.remaining", "slider", inactiveLabel: false, range:"(0..590)", height: 2, width: 4) {
-            	state "level", action:"remainingLevel"
-            }
-            valueTile("setRemaining", "device.remainingText", inactiveLabel: false, decoration: "flat", height: 2, width: 2){
-                state "remainingText", label:'${currentValue}\nRemaining'//, action: "setRemaining"//, icon: "st.Office.office6"
-            }
-
-            standardTile("setTimeout10", "device.remaining", inactiveLabel: false, decoration: "flat") {
-                state "default", label:'10Min', action: "setTimeout10", icon:"st.Health & Wellness.health7", defaultState: true
-                state "10", label:'10Min', action: "setTimeout10", icon:"st.Office.office13"
-            }
-            standardTile("setTimeout20", "device.remaining", inactiveLabel: false, decoration: "flat") {
-                state "default", label:'20Min', action: "setTimeout20", icon:"st.Health & Wellness.health7", defaultState: true
-                state "20", label:'20Min', action: "setTimeout20", icon:"st.Office.office13"
-            }
-            standardTile("setTimeout30", "device.remaining", inactiveLabel: false, decoration: "flat") {
-                state "default", label:'30Min', action: "setTimeout30", icon:"st.Health & Wellness.health7", defaultState: true
-                state "30", label:'30Min', action: "setTimeout30", icon:"st.Office.office13"
-            }
-            standardTile("setTimeout40", "device.remaining", inactiveLabel: false, decoration: "flat") {
-                state "default", label:'40Min', action: "setTimeout40", icon:"st.Health & Wellness.health7", defaultState: true
-                state "40", label:'40Min', action: "setTimeout40", icon:"st.Office.office13"
-            }
-
-            valueTile("batteryTile", "device.battery", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-                state "battery", label:'${currentValue}% battery', unit:""
-            }
-
-            main (["statusTile"])
-//            details (["statusTile", "remainingSliderTile", "setRemaining", "setTimeout10", "setTimeout20", "batteryTile", "refreshTile", "setTimeout30", "setTimeout40"])
-//            details (["statusTile", "batteryTile", "setRemaining", "refreshTile"])
-            details (["statusTile", "batteryTile", "refreshTile"])
-        }
-}
-
-def parse(description) {
-//	log.debug "parse - " + description
-	def result = null
-	if (description.startsWith("Err 106")) {
-		state.sec = 0
-		result = createEvent(descriptionText: description, isStateChange: true)
-	} else if (description != "updated") {
-		def cmd = zwave.parse(description, [0x20: 1, 0x25: 1, 0x70: 1, 0x71: 1, 0x98: 1])
-		if (cmd) {
-        	log.debug "parsed cmd = " + cmd
-			result = zwaveEvent(cmd)
-			//log.debug("'$description' parsed to $result")
-		} else {
-			log.debug("Couldn't zwave.parse '$description'")
-		}
-	}
-	return result
-}
-
-// 복호화 후 zwaveEvent() 호출
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	//log.debug "SecurityMessageEncapsulation - " + cmd
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x70: 1, 0x71: 1, 0x98: 1])
-	if (encapsulatedCommand) {
-		state.sec = 1
-        log.debug "encapsulatedCommand = " + encapsulatedCommand
-        zwaveEvent(encapsulatedCommand)
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
-	//log.debug "switch status - " + cmd.value
-    createEvent(name:"contact", value: cmd.value ? "open" : "closed")
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-    def map = [ name: "battery", unit: "%" ]
-    if (cmd.batteryLevel == 0xFF) {  // Special value for low battery alert
-        map.value = 1
-        map.descriptionText = "${device.displayName} has a low battery"
-        map.isStateChange = true
-    } else {
-        map.value = cmd.batteryLevel
-    }
-    
-    log.debug "battery - ${map.value}${map.unit}"
-    // Store time of last battery update so we don't ask every wakeup, see WakeUpNotification handler
-    state.lastbatt = new Date().time
-    createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-  //log.debug "zwaveEvent - ${device.displayName}: ${cmd}"
-  createEvent(descriptionText: "${device.displayName}: ${cmd}")
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
-	def result = []
-	log.info "zwave.configurationV1.configurationGet - " + cmd
-    def array = cmd.configurationValue
-    def value = ( (array[0] * 0x1000000) + (array[1] * 0x10000) + (array[2] * 0x100) + array[3] ).intdiv(60)
-    if (device.currentValue("contact") == "open") {
-    	value = ( (array[0] * 0x1000000) + (array[1] * 0x10000) + (array[2] * 0x100) + array[3] ).intdiv(60)
-    } else {
-    	value = 0
-    }
-    
-    if (device.currentValue('contact') == 'open') {
-    	def hour = value.intdiv(60);
-        def min = (value % 60).toString().padLeft(2, '0');
-        def text = "${hour}:${min}M"
-        
-        log.info "remain - " + text
-        result.add( createEvent(name: "remaining", value: value, displayed: false, isStateChange: true) )
-        result.add( createEvent(name: "remainingText", value: text, displayed: false, isStateChange: true) )
-    } else {
-    	result.add( createEvent(name: "timeout", value: value, displayed: false, isStateChange: true) )
-    }
-    return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
-	def type = cmd.notificationType
-    if (type == cmd.NOTIFICATION_TYPE_HEAT) {
-    	log.info "NotificationReport - ${type}"
-        createEvent(name: "temperature", value: 999, unit: "C", descriptionText: "${device.displayName} is over heat!", displayed: true, isStateChange: true)
-    }
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.alarmv1.AlarmReport cmd) {
-	def type = cmd.alarmType
-    def level = cmd.alarmLevel
-    
-    log.info "AlarmReport - type : ${type}, level : ${level}"
-    def msg = "${device.displayName} is over heat!"
-    def result = createEvent(name: "temperature", value: 999, unit: "C", descriptionText: msg, displayed: true, isStateChange: true)
-    if (sendPushMessage) {
-    	sendPushMessage(msg)
-    }
-    return result
-}
-
-// remote open not allow
-def open() {}
-
-def close() {
-//	log.debug 'cmd - close()'
-    commands([
-        zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00),
-		zwave.switchBinaryV1.switchBinaryGet()
-	])
-}
-
-def setTimeout10() { setTimeout(10) }
-def setTimeout20() { setTimeout(20) }
-def setTimeout30() { setTimeout(30) }
-def setTimeout40() { setTimeout(40) }
-
-
-def setTimeout(value) {
-//	log.debug "setDefaultTime($value)"
-    commands([
-    	zwave.configurationV1.configurationSet(parameterNumber: 0x01, size: 4, scaledConfigurationValue: value * 60),
-        zwave.configurationV1.configurationGet(parameterNumber: 0x01)
-    ]);
-}
-
-def remainingLevel(value) {
-//	log.debug "remainingLevel($value)"
-    def hour = value.intdiv(60);
-    def min = (value % 60).toString().padLeft(2, '0');
-    def text = "${hour}:${min}M"
-    sendEvent(name: "remaining", value: value, displayed: false, isStateChange: true)
-    sendEvent(name: "remainingText", value: text, displayed: false, isStateChange: true)
-}
-
-def setRemaining() {
-	def remaining = device.currentValue("remaining")
-//	log.debug "setConfiguration() - remaining : $remaining"
-    commands([
-    	zwave.configurationV1.configurationSet(parameterNumber: 0x03, size: 4, scaledConfigurationValue: remaining * 60),
-        zwave.configurationV1.configurationGet(parameterNumber: 0x03)
-    ]);
-}
-
-private command(physicalgraph.zwave.Command cmd) {
-	if (state.sec != 0 && !(cmd instanceof physicalgraph.zwave.commands.batteryv1.BatteryGet)) {
-    	log.debug "cmd = " + cmd + ", encapsulation"
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	} else {
-    	log.debug "cmd = " + cmd + ", plain"
-		cmd.format()
-	}
-}
-
-private commands(commands, delay=200) {
-	delayBetween(commands.collect{ command(it) }, delay)
-}
-
-def refresh() {
-//	log.debug 'cmd - refresh()'
-	commands([
-    			zwave.batteryV1.batteryGet(),
-                zwave.switchBinaryV1.switchBinaryGet(),
-                zwave.configurationV1.configurationGet(parameterNumber: 0x01),
-                zwave.configurationV1.configurationGet(parameterNumber: 0x03)
-        ], 400)
-}