MSA-753: Sets mode to home when somebody is home, away when everyone is gone and home / night (optionally) depending on sunrise / sunset.

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -1,153 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-    definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
-        capability "Tone"
-        capability "Actuator"
-        capability "Presence Sensor"
-        capability "Sensor"
-        capability "Battery"
-        capability "Configuration"
-
-        fingerprint inClusters: "0000,0001,0003,000F,0020", outClusters: "0003,0019",
-                        manufacturer: "SmartThings", model: "tagv4", deviceJoinName: "Arrival Sensor"
-    }
-
-    preferences {
-        section {
-            image(name: 'educationalcontent', multiple: true, images: [
-                "http://cdn.device-gse.smartthings.com/Arrival/Arrival1.png",
-                "http://cdn.device-gse.smartthings.com/Arrival/Arrival2.png"
-                ])
-        }
-        section {
-            input "checkInterval", "enum", title: "Presence timeout (minutes)",
-                    defaultValue:"2", options: ["2", "3", "5"], displayDuringSetup: false
-        }
-    }
-
-    tiles {
-        standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-            state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
-            state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
-        }
-        standardTile("beep", "device.beep", decoration: "flat") {
-            state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"
-        }
-        valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
-            state "battery", label:'${currentValue}% battery', unit:""
-        }
-
-        main "presence"
-        details(["presence", "beep", "battery"])
-    }
-}
-
-def updated() {
-    startTimer()
-}
-
-def configure() {
-    def cmds = zigbee.configureReporting(0x0001, 0x0020, 0x20, 20, 20, 0x01)
-    log.debug "configure -- cmds: ${cmds}"
-    return cmds
-}
-
-def beep() {
-    log.debug "Sending Identify command to beep the sensor for 5 seconds"
-    return zigbee.command(0x0003, 0x00, "0500")
-}
-
-def parse(String description) {
-    state.lastCheckin = now()
-    handlePresenceEvent(true)
-
-    if (description?.startsWith('read attr -')) {
-        handleReportAttributeMessage(description)
-    }
-}
-
-private handleReportAttributeMessage(String description) {
-    def descMap = zigbee.parseDescriptionAsMap(description)
-
-    if (descMap.clusterInt == 0x0001 && descMap.attrInt == 0x0020) {
-        handleBatteryEvent(Integer.parseInt(descMap.value, 16))
-    }
-}
-
-private handleBatteryEvent(rawValue) {
-    def linkText = getLinkText(device)
-
-    def eventMap = [
-        name: 'battery',
-        value: '--'
-    ]
-
-    def volts = rawValue / 10
-    if (volts > 0){
-        def minVolts = 2.0
-        def maxVolts = 2.8
-
-        if (volts < minVolts)
-            volts = minVolts
-        else if (volts > maxVolts)
-            volts = maxVolts
-        def pct = (volts - minVolts) / (maxVolts - minVolts)
-
-        eventMap.value = Math.round(pct * 100)
-        eventMap.descriptionText = "${linkText} battery was ${eventMap.value}%"
-    }
-
-    log.debug "Creating battery event: ${eventMap}"
-    sendEvent(eventMap)
-}
-
-private handlePresenceEvent(present) {
-    def wasPresent = device.currentState("presence")?.value == "present"
-    if (!wasPresent && present) {
-        log.debug "Sensor is present"
-        startTimer()
-    } else if (!present) {
-        log.debug "Sensor is not present"
-        stopTimer()
-    }
-    def linkText = getLinkText(device)
-    def eventMap = [
-        name: "presence",
-        value: present ? "present" : "not present",
-        linkText: linkText,
-        descriptionText: "${linkText} has ${present ? 'arrived' : 'left'}",
-    ]
-    log.debug "Creating presence event: ${eventMap}"
-    sendEvent(eventMap)
-}
-
-private startTimer() {
-    log.debug "Scheduling periodic timer"
-    schedule("0 * * * * ?", checkPresenceCallback)
-}
-
-private stopTimer() {
-    log.debug "Stopping periodic timer"
-    unschedule()
-}
-
-def checkPresenceCallback() {
-    def timeSinceLastCheckin = (now() - state.lastCheckin) / 1000
-    def theCheckInterval = (checkInterval ? checkInterval as int : 2) * 60
-    log.debug "Sensor checked in ${timeSinceLastCheckin} seconds ago"
-    if (timeSinceLastCheckin >= theCheckInterval) {
-        handlePresenceEvent(false)
-    }
-}

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -67,7 +67,7 @@ metadata {
 			state "setpoint", action:"raiseSetpoint", icon:"st.thermostat.thermostat-up"
 		}
 		valueTile("thermostatSetpoint", "device.thermostatSetpoint", width: 1, height: 1, decoration: "flat") {
-			state "thermostatSetpoint", label:'${currentValue}'
+			state "thermostatSetpoint", label:'${currentValue}°'
 		}
 		valueTile("currentStatus", "device.thermostatStatus", height: 1, width: 2, decoration: "flat") {
 			state "thermostatStatus", label:'${currentValue}', backgroundColor:"#ffffff"

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -204,10 +204,8 @@ private List parseReportAttributeMessage(String description) {
 		}
         result << getAccelerationResult(descMap.value)
 	}
-	else if (descMap.cluster == "FC02" && descMap.attrId == "0012" && descMap.value.size() == 24) {
+	else if (descMap.cluster == "FC02" && descMap.attrId == "0012") {
-		// The size is checked to ensure the attribute report contains X, Y and Z values
+        result << parseAxis(descMap.value)
-		// If all three axis are not included then the attribute report is ignored
-		result << parseAxis(descMap.value)
 	}
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
@@ -373,50 +371,21 @@ def getTemperature(value) {
 
 	def refresh() {
 		log.debug "Refreshing Values "
+		def refreshCmds = [
         
-        def refreshCmds = []
+        /* sensitivity - default value (8) */
         
-		if (device.getDataValue("manufacturer") == "SmartThings") {
+        "zcl mfg-code ${manufacturerCode}", "delay 200",
-        	
+        "zcl global write 0xFC02 0 0x20 {02}", "delay 200",
-			log.debug "Refreshing Values for manufacturer: SmartThings "
+        "send 0x${device.deviceNetworkId} 1 1", "delay 400",
-         	refreshCmds = refreshCmds + [
 
-	            /* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-	               seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer. 
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
-	               Separating these out in a separate if-else because I do not want to touch Centralite part 
-	               as of now. 
-	            */
 
-	            "zcl mfg-code ${manufacturerCode}", "delay 200",
+        "zcl mfg-code ${manufacturerCode}", "delay 200",
-	            "zcl global write 0xFC02 0 0x20 {01}", "delay 200",
+        "zcl global read 0xFC02 0x0010",
-	            "send 0x${device.deviceNetworkId} 1 1", "delay 400",
+        "send 0x${device.deviceNetworkId} 1 1","delay 400"
-	            
+	]
-	            "zcl mfg-code ${manufacturerCode}", "delay 200",
-	            "zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
-            	"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-                
-            ]
-            
-        
-        } else {
-             refreshCmds = refreshCmds + [
-
-                /* sensitivity - default value (8) */
-	            "zcl mfg-code ${manufacturerCode}", "delay 200",
-                "zcl global write 0xFC02 0 0x20 {02}", "delay 200",
-            	"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-            ]
-        }
-        
-        //Common refresh commands
-        refreshCmds = refreshCmds + [
-            "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-            "st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
-
-            "zcl mfg-code ${manufacturerCode}", "delay 200",
-            "zcl global read 0xFC02 0x0010",
-            "send 0x${device.deviceNetworkId} 1 1","delay 400"
-        ]
 
 		return refreshCmds + enrollResponse()
 	}
@@ -478,34 +447,35 @@ def enrollResponse() {
 	]
 }
 
+
 private Map parseAxis(String description) {
-	def hexToSignedInt = { hexVal ->
+	log.debug "parseAxis"
-		def unsignedVal = hexToInt(hexVal)
+	def xyzResults = [x: 0, y: 0, z: 0]
-		unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
+    def parts = description.split("2900")
-	}
+    parts[0] = "12" + parts[0]
-
+    parts.each { part ->
-	def z = hexToSignedInt(description[0..3])
+    	part = part.trim()
-	def y = hexToSignedInt(description[10..13])
+        if (part.startsWith("12")) {
-	def x = hexToSignedInt(description[20..23])
+    		def unsignedX = hexToInt(part.split("12")[1].trim())
-	def xyzResults = [x: x, y: y, z: z]
+			def signedX = unsignedX > 32767 ? unsignedX - 65536 : unsignedX
-
+			xyzResults.x = signedX
-	if (device.getDataValue("manufacturer") == "SmartThings") {
+            log.debug "X Part: ${signedX}"
-		// This mapping matches the current behavior of the Device Handler for the Centralite sensors
+        }
-		xyzResults.x = z
+        else if (part.startsWith("13")) {
-		xyzResults.y = y
+			def unsignedY = hexToInt(part.split("13")[1].trim())
-		xyzResults.z = -x
+			def signedY = unsignedY > 32767 ? unsignedY - 65536 : unsignedY
-	} else {
+			xyzResults.y = signedY
-		// The axises reported by the Device Handler differ from the axises reported by the sensor
+            log.debug "Y Part: ${signedY}"
-		// This may change in the future
+        }
-		xyzResults.x = z
+        else if (part.startsWith("14")) {
-		xyzResults.y = x
+			def unsignedZ = hexToInt(part.split("14")[1].trim())
-		xyzResults.z = y
+			def signedZ = unsignedZ > 32767 ? unsignedZ - 65536 : unsignedZ
-	}
+			xyzResults.z = signedZ
-
+            log.debug "Z Part: ${signedZ}"
-	log.debug "parseAxis -- ${xyzResults}"
+			if (garageSensor == "Yes")
-
+				garageEvent(signedZ)
-	if (garageSensor == "Yes")
+        }
-		garageEvent(xyzResults.z)
+    }
 
 	getXyzResult(xyzResults, description)
 }
@@ -583,4 +553,3 @@ private byte[] reverseArray(byte[] array) {
 	return array
 }
 
-

devicetypes/smartthings/testing/simulated-thermostat.src/simulated-thermostat.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2015 SmartThings
+ *  Copyright 2014 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -15,7 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Thermostat", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Thermostat"
-		capability "Relative Humidity Measurement"
 
 		command "tempUp"
 		command "tempDown"
@@ -23,40 +22,11 @@ metadata {
 		command "heatDown"
 		command "coolUp"
 		command "coolDown"
-		command "setTemperature", ["number"]
+        command "setTemperature", ["number"]
 	}
 
-	tiles(scale: 2) {
+	tiles {
-		multiAttributeTile(name:"thermostatMulti", type:"thermostat", width:6, height:4) {
+		valueTile("temperature", "device.temperature", width: 1, height: 1) {
-			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
-				attributeState("default", action: "setTemperature")
-			}
-			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
-				attributeState("default", label:'${currentValue}%', unit:"%")
-			}
-			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
-				attributeState("idle", backgroundColor:"#44b621")
-				attributeState("heating", backgroundColor:"#ffa81e")
-				attributeState("cooling", backgroundColor:"#269bd2")
-			}
-			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
-				attributeState("off", label:'${name}')
-				attributeState("heat", label:'${name}')
-				attributeState("cool", label:'${name}')
-				attributeState("auto", label:'${name}')
-			}
-			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-		}
-
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}', unit:"dF",
 				backgroundColors:[
 					[value: 31, color: "#153591"],
@@ -69,51 +39,51 @@ metadata {
 				]
 			)
 		}
-		standardTile("tempDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("tempDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'down', action:"tempDown"
 		}
-		standardTile("tempUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("tempUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'up', action:"tempUp"
 		}
 
-		valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		valueTile("heatingSetpoint", "device.heatingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "heat", label:'${currentValue} heat', unit: "F", backgroundColor:"#ffffff"
 		}
-		standardTile("heatDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("heatDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'down', action:"heatDown"
 		}
-		standardTile("heatUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("heatUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'up', action:"heatUp"
 		}
 
-		valueTile("coolingSetpoint", "device.coolingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		valueTile("coolingSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "cool", label:'${currentValue} cool', unit:"F", backgroundColor:"#ffffff"
 		}
-		standardTile("coolDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("coolDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'down', action:"coolDown"
 		}
-		standardTile("coolUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("coolUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'up', action:"coolUp"
 		}
 
-		standardTile("mode", "device.thermostatMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
 			state "off", label:'${name}', action:"thermostat.heat", backgroundColor:"#ffffff"
 			state "heat", label:'${name}', action:"thermostat.cool", backgroundColor:"#ffa81e"
 			state "cool", label:'${name}', action:"thermostat.auto", backgroundColor:"#269bd2"
 			state "auto", label:'${name}', action:"thermostat.off", backgroundColor:"#79b821"
 		}
-		standardTile("fanMode", "device.thermostatFanMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
 			state "fanAuto", label:'${name}', action:"thermostat.fanOn", backgroundColor:"#ffffff"
 			state "fanOn", label:'${name}', action:"thermostat.fanCirculate", backgroundColor:"#ffffff"
 			state "fanCirculate", label:'${name}', action:"thermostat.fanAuto", backgroundColor:"#ffffff"
 		}
-		standardTile("operatingState", "device.thermostatOperatingState", width: 2, height: 2) {
+		standardTile("operatingState", "device.thermostatOperatingState") {
 			state "idle", label:'${name}', backgroundColor:"#ffffff"
 			state "heating", label:'${name}', backgroundColor:"#ffa81e"
 			state "cooling", label:'${name}', backgroundColor:"#269bd2"
 		}
 
-		main("thermostatMulti")
+		main("temperature","operatingState")
 		details([
 			"temperature","tempDown","tempUp",
 			"mode", "fanMode", "operatingState",
@@ -131,7 +101,6 @@ def installed() {
 	sendEvent(name: "thermostatMode", value: "off")
 	sendEvent(name: "thermostatFanMode", value: "fanAuto")
 	sendEvent(name: "thermostatOperatingState", value: "idle")
-	sendEvent(name: "humidity", value: 53, unit: "%")
 }
 
 def parse(String description) {

devicetypes/smartthings/wattvision.src/wattvision.groovy

@@ -29,7 +29,7 @@ metadata {
 
 	tiles {
 
-		valueTile("power", "device.power", canChangeIcon: true) {
+		valueTile("power", "device.power") {
 			state "power", label: '${currentValue} W'
 		}
 

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -273,7 +273,7 @@ User-Agent: CyberGarage-HTTP/1.0
 def poll() {
 log.debug "Executing 'poll'"
 if (device.currentValue("currentIP") != "Offline")
-    runIn(30, setOffline)
+    runIn(10, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -77,8 +77,9 @@ def parse(String description) {
 	def result = []
 	def bodyString = msg.body
 	if (bodyString) {
-    	unschedule("setOffline")
+    unschedule("setOffline")
 		def body = new XmlSlurper().parseText(bodyString)
+
 		if (body?.property?.TimeSyncRequest?.text()) {
 			log.trace "Got TimeSyncRequest"
 			result << timeSyncResponse()
@@ -133,7 +134,7 @@ def refresh() {
 def getStatus() {
 log.debug "Executing WeMo Motion 'getStatus'"
 if (device.currentValue("currentIP") != "Offline")
-    runIn(30, setOffline)
+    runIn(10, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -28,7 +28,6 @@
         command "subscribe"
         command "resubscribe"
         command "unsubscribe"
-        command "setOffline"
  }
 
  // simulator metadata
@@ -208,7 +207,7 @@ def subscribe(ip, port) {
     def existingIp = getDataValue("ip")
     def existingPort = getDataValue("port")
     if (ip && ip != existingIp) {
-         log.debug "Updating ip from $existingIp to $ip"    
+         log.debug "Updating ip from $existingIp to $ip"
     	 updateDataValue("ip", ip)
     	 def ipvalue = convertHexToIP(getDataValue("ip"))
          sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
@@ -276,7 +275,7 @@ def setOffline() {
 def poll() {
 log.debug "Executing 'poll'"
 if (device.currentValue("currentIP") != "Offline")
-    runIn(30, setOffline)
+    runIn(10, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277
@@ -291,4 +290,4 @@ User-Agent: CyberGarage-HTTP/1.0
 </u:GetBinaryState>
 </s:Body>
 </s:Envelope>""", physicalgraph.device.Protocol.LAN)
-}
+}

smartapps/com-vinli-smartthings/vinli-home-connect.src/vinli-home-connect.groovy

@@ -1,189 +0,0 @@
-/**
- *  Vinli Home Beta
- *
- *  Copyright 2015 Daniel
- *
- */
-definition(
-    name: "Vinli Home Connect",
-    namespace: "com.vinli.smartthings",
-    author: "Daniel",
-    description: "Allows Vinli users to connect their car to SmartThings",
-    category: "SmartThings Labs",
-    iconUrl: "https://d3azp77rte0gip.cloudfront.net/smartapps/baeb2e5d-ebd0-49fe-a4ec-e92417ae20bb/images/vinli_oauth_60.png",
-    iconX2Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/baeb2e5d-ebd0-49fe-a4ec-e92417ae20bb/images/vinli_oauth_120.png",
-    iconX3Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/baeb2e5d-ebd0-49fe-a4ec-e92417ae20bb/images/vinli_oauth_120.png",
-    oauth: true)
-  
-preferences {
-  section ("Allow external service to control these things...") {
-    input "switches", "capability.switch", multiple: true, required: true
-    input "locks", "capability.lock", multiple: true, required: true
-  }
-}
-
-mappings {
-  
-  path("/devices") {
-    action: [
-      GET: "listAllDevices"
-    ]
-  }
-	
-  path("/switches") {
-    action: [
-      GET: "listSwitches"
-    ]
-  }
-  path("/switches/:command") {
-    action: [
-      PUT: "updateSwitches"
-    ]
-  }
-  path("/switches/:id/:command") {
-    action: [
-      PUT: "updateSwitch"
-    ]
-  }
-   path("/locks/:command") {
-    action: [
-      PUT: "updateLocks"
-    ]
-  }
-  path("/locks/:id/:command") {
-    action: [
-      PUT: "updateLock"
-    ]
-  }
-  
-   path("/devices/:id/:command") {
-    action: [
-      PUT: "commandDevice"
-    ]
-  }
-}
-
-// returns a list of all devices
-def listAllDevices() {
-   	def resp = []
-   	switches.each {
-      resp << [name: it.name, label: it.label, value: it.currentValue("switch"), type: "switch", id: it.id, hub: it.hub.name]
-    }
-    
-    locks.each {
-      resp << [name: it.name, label: it.label, value: it.currentValue("lock"), type: "lock", id: it.id, hub: it.hub.name]
-    }
-    return resp
-}
- 
-// returns a list like
-// [[name: "kitchen lamp", value: "off"], [name: "bathroom", value: "on"]]
-def listSwitches() {
-    def resp = []
-    switches.each {
-      resp << [name: it.displayName, value: it.currentValue("switch"), type: "switch", id: it.id]
-    }
-    return resp
-}
-
-void updateLocks() {
-    // use the built-in request object to get the command parameter
-    def command = params.command
-
-    if (command) {
-
-        // check that the switch supports the specified command
-        // If not, return an error using httpError, providing a HTTP status code.
-        locks.each {
-            if (!it.hasCommand(command)) {
-                httpError(501, "$command is not a valid command for all switches specified")
-            } 
-        }
-        
-        // all switches have the comand
-        // execute the command on all switches
-        // (note we can do this on the array - the command will be invoked on every element
-        locks."$command"()
-    }
-}
-
-void updateLock() {
-    def command = params.command
-    
-    locks.each {
-      	if (!it.hasCommand(command)) {
-            httpError(400, "$command is not a valid command for all lock specified")
-        }
-        
-        if (it.id == params.id) {
-            it."$command"()
-        }
-    }
-}
-
-void updateSwitch() {
-    def command = params.command
-    
-    switches.each {
-      	if (!it.hasCommand(command)) {
-            httpError(400, "$command is not a valid command for all switches specified")
-        }
-        
-        if (it.id == params.id) {
-            it."$command"()
-        }
-    }
-}
-
-void commandDevice() {
-    def command = params.command
-    def devices = []
-    
-    switches.each {
-    	devices << it
-    }
-    
-    locks.each {
-    	devices << it
-    }
-    
-    devices.each {
-        if (it.id == params.id) {
-            if (!it.hasCommand(command)) {
-                httpError(400, "$command is not a valid command for specified device")
-            }
-            it."$command"()
-        }
-    }
-}
-
-void updateSwitches() {
-    // use the built-in request object to get the command parameter
-    def command = params.command
-
-    if (command) {
-
-        // check that the switch supports the specified command
-        // If not, return an error using httpError, providing a HTTP status code.
-        switches.each {
-            if (!it.hasCommand(command)) {
-                httpError(400, "$command is not a valid command for all switches specified")
-            } 
-        }
-        
-        // all switches have the comand
-        // execute the command on all switches
-        // (note we can do this on the array - the command will be invoked on every element
-        switches."$command"()
-    }
-}
-
- def installed() {
-	log.debug "Installed with settings: ${settings}"
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-}

smartapps/imbrianj/nobody-home.src/nobody-home.groovy

@@ -1,164 +1,427 @@
 /**
  *  Nobody Home
  *
- *  Author: brian@bevey.org
+ *  Author: brian@bevey.org, raychi@gmail.com
- *  Date: 12/19/14
+ *  Date: 12/02/2015
  *
- *  Monitors a set of presence detectors and triggers a mode change when everyone has left.
+ *  Licensed under the Apache License, Version 2.0 (the "License");
- *  When everyone has left, sets mode to a new defined mode.
+ *  you may not use this file except in compliance with the License.
- *  When at least one person returns home, set the mode back to a new defined mode.
+ *  You may obtain a copy of the License at:
- *  When someone is home - or upon entering the home, their mode may change dependent on sunrise / sunset.
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing,
+ *  software distributed under the License is distributed on an "AS
+ *  IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
+ *  express or implied. See the License for the specific language
+ *  governing permissions and limitations under the License.
  */
 
-definition(
+/**
-  name: "Nobody Home",
+ *  Monitors a set of presence sensors and trigger appropriate mode
-  namespace: "imbrianj",
+ *  based on configured modes and sunrise/sunset time.
-  author: "brian@bevey.org",
+ *
-  description: "When everyone leaves, change mode.  If at least one person home, switch mode based on sun position.",
+ *  - When everyone is away [Away]
-  category: "Mode Magic",
+ *  - When someone is home during the day [Home]
-  iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+ *  - When someone is home at the night [Night]
-  iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png"
+ */
+
+// ********** App related functions **********
+
+// The definition provides metadata about the App to SmartThings.
+definition (
+    name:        "Nobody Home",
+    namespace:   "imbrianj",
+    author:      "brian@bevey.org",
+    description: "Automatically set Away/Home/Night mode based on a set of presence sensors and sunrise/sunset time.",
+    category:    "Mode Magic",
+    iconUrl:     "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url:   "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url:   "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png"
 )
 
+// The preferences defines information the App needs from the user.
 preferences {
-  section("When all of these people leave home") {
+    section("Presence sensors to monitor") {
-    input "people", "capability.presenceSensor", multiple: true
+        input "people", "capability.presenceSensor", multiple: true
-  }
-
-  section("Change to this mode to...") {
-    input "newAwayMode",    "mode", title: "Everyone is away"
-    input "newSunsetMode",  "mode", title: "At least one person home and nightfall"
-    input "newSunriseMode", "mode", title: "At least one person home and sunrise"
-  }
-
-  section("Away threshold (defaults to 10 min)") {
-    input "awayThreshold", "decimal", title: "Number of minutes", required: false
-  }
-
-  section("Notifications") {
-    input "sendPushMessage", "enum", title: "Send a push notification?", metadata:[values:["Yes","No"]], required:false
-  }
-}
-
-def installed() {
-  init()
-}
-
-def updated() {
-  unsubscribe()
-  init()
-}
-
-def init() {
-  subscribe(people,   "presence", presence)
-  subscribe(location, "sunrise",  setSunrise)
-  subscribe(location, "sunset",   setSunset)
-
-  state.sunMode = location.mode
-}
-
-def setSunrise(evt) {
-  changeSunMode(newSunriseMode)
-}
-
-def setSunset(evt) {
-  changeSunMode(newSunsetMode)
-}
-
-def changeSunMode(newMode) {
-  state.sunMode = newMode
-
-  if(everyoneIsAway() && (location.mode == newAwayMode)) {
-    log.debug("Mode is away, not evaluating")
-  }
-
-  else if(location.mode != newMode) {
-    def message = "${app.label} changed your mode to '${newMode}'"
-    send(message)
-    setLocationMode(newMode)
-  }
-
-  else {
-    log.debug("Mode is the same, not evaluating")
-  }
-}
-
-def presence(evt) {
-  if(evt.value == "not present") {
-    log.debug("Checking if everyone is away")
-
-    if(everyoneIsAway()) {
-      log.info("Starting ${newAwayMode} sequence")
-      def delay = (awayThreshold != null && awayThreshold != "") ? awayThreshold * 60 : 10 * 60
-      runIn(delay, "setAway")
-    }
-  }
-
-  else {
-    if(location.mode != state.sunMode) {
-      log.debug("Checking if anyone is home")
-
-      if(anyoneIsHome()) {
-        log.info("Starting ${state.sunMode} sequence")
-
-        changeSunMode(state.sunMode)
-      }
     }
 
-    else {
+    section("Mode setting") {
-      log.debug("Mode is the same, not evaluating")
+        input "newAwayMode",    "mode", title: "Everyone is away"
-    }
+        input "newSunriseMode", "mode", title: "Someone is home during the day"
-  }
+        input "newSunsetMode",  "mode", title: "Someone is home at night"
-}
-
-def setAway() {
-  if(everyoneIsAway()) {
-    if(location.mode != newAwayMode) {
-      def message = "${app.label} changed your mode to '${newAwayMode}' because everyone left home"
-      log.info(message)
-      send(message)
-      setLocationMode(newAwayMode)
     }
 
-    else {
+    section("Mode change delay (minutes)") {
-      log.debug("Mode is the same, not evaluating")
+        input "awayThreshold", "decimal", title: "Away delay [5m]", required: false
+        input "arrivalThreshold", "decimal", title: "Arrival delay [2m]", required: false
     }
-  }
 
-  else {
+    section("Notifications") {
-    log.info("Somebody returned home before we set to '${newAwayMode}'")
+        input "sendPushMessage", "bool", title: "Push notification", required:false
-  }
+    }
 }
 
-private everyoneIsAway() {
+// called when the user installs the App
-  def result = true
+def installed()
-
+{
-  if(people.findAll { it?.currentPresence == "present" }) {
+    log.debug("installed() @${location.name}: ${settings}")
-    result = false
+    initialize(true)
-  }
-
-  log.debug("everyoneIsAway: ${result}")
-
-  return result
 }
 
-private anyoneIsHome() {
+// called when the user installs the app, or changes the App
-  def result = false
+// preference
-
+def updated()
-  if(people.findAll { it?.currentPresence == "present" }) {
+{
-    result = true
+    log.debug("updated() @${location.name}: ${settings}")
-  }
+    unsubscribe()
-
+    initialize(false)
-  log.debug("anyoneIsHome: ${result}")
-
-  return result
 }
 
-private send(msg) {
+def initialize(isInstall)
-  if(sendPushMessage != "No") {
+{
-    log.debug("Sending push message")
+    // subscribe to all the events we care about
-    sendPush(msg)
+    log.debug("Subscribing to events ...")
-  }
 
-  log.debug(msg)
+    // thing to subscribe, attribute/state we care about, and callback fn
+    subscribe(people,   "presence", presenceHandler)
+    subscribe(location, "sunrise",  sunriseHandler)
+    subscribe(location, "sunset",   sunsetHandler)
+
+    // set the optional parameter values. these are not available
+    // directly until the app has initialized (that is,
+    // installed/updated has returned). so here we access them through
+    // the settings object, as otherwise will get an exception.
+
+    // store information we need in state object so we can get access
+    // to it later in our event handlers.
+
+    // calculate the away threshold in seconds. can't use the simpler
+    // default falsy value, as value of 0 (no delay) is evaluated to
+    // false (not specified), but we want 0 to represent no delay. so
+    // we compare against null explicitly to see if the user has set a
+    // value or not.
+    if (settings.awayThreshold == null) {
+        settings.awayThreshold = 5  // default away 5 minute
+    }
+    state.awayDelay = (int) settings.awayThreshold * 60
+    log.debug("awayThreshold set to " + state.awayDelay + " second(s)")
+
+    if (settings.arrivalThreshold == null) {
+        settings.arrivalThreshold = 2  // default arrival 2 minute
+    }
+    state.arrivalDelay = (int) settings.arrivalThreshold * 60
+    log.debug("arrivalThreshold set to " + state.arrivalDelay + " second(s)")
+
+    // get push notification setting
+    state.isPush = settings.sendPushMessage ? true : false
+    log.debug("sendPushMessage set to " + state.isPush)
+
+    // on install (not update), figure out what mode we should be in
+    // IF someone's home. This value is needed so that when a presence
+    // sensor is triggered, we know what mode to set the system to, as
+    // the sunrise/sunset event handler may not be triggered yet after
+    // a fresh install.
+    if (isInstall) {
+        // TODO: for now, we simply assume daytime. a better approach
+        //       would be to figure out whether current time is day or
+        //       night, and set it appropriately. However there
+        //       doesn't seem to be a way to query this directly
+        //       without a zip code. This will become the correct
+        //       value at the next sunrise/sunset event.
+        log.debug("No sun info yet, assuming daytime")
+        state.modeIfHome = newSunriseMode
+
+        // set keep a separate sun mode state so we can show a more
+        // helpful message when sun events are triggered.
+        state.currentSunMode = "sunUnknown"
+
+        state.eventDevice = ""  // last event device
+
+        // device that triggered timer. This is not necessarily the
+        // eventDevice. For example, if A arrives, kick off timer,
+        // then b arrives before timer elapsed, we want the
+        // notification message to reference A, not B.
+        state.timerDevice = null
+
+        // anything in flight? We use this to avoid scheduling
+        // duplicate timers (so we don't extend the timer).
+        state.pendingOp = "init"
+
+        // now set the correct mode for the location. This way, we
+        // don't need to wait for the next sun/presence event.
+
+        // we schedule this action to run after the app has fully
+        // initialized. This way, the app install is faster and the
+        // user customized app name is used in the notification.
+        runIn(7, "setInitialMode")
+    }
+    // On update, we don't change state.modeIfHome. This is so that we
+    // preserve the current sun rise/set state we obtained in earlier
+    // sunset/sunrise handler. This way the app remains in the correct
+    // sun state when the user reconfigures it.
 }
+
+def setInitialMode()
+{
+    changeSunMode(state.modeIfHome)
+    state.pendingOp = null
+}
+
+// ********** sunrise/sunset handling **********
+
+// event handler when the sunrise time is reached
+def sunriseHandler(evt)
+{
+    // we store the mode we should be in, IF someone's home
+    state.modeIfHome = newSunriseMode
+    state.currentSunMode = "sunRise"
+
+    // change mode if someone's home, otherwise set to away
+    changeSunMode(newSunriseMode)
+}
+
+// event handler when the sunset time is reached
+def sunsetHandler(evt)
+{
+    // we store the mode we should be in, IF someone's home
+    state.modeIfHome = newSunsetMode
+    state.currentSunMode = "sunSet"
+
+    // change mode if someone's home, otherwise set to away
+    changeSunMode(newSunsetMode)
+}
+
+def changeSunMode(newMode)
+{
+    // if everyone is away, we need to check and ensure the system is
+    // in away mode.
+    if (isEveryoneAway()) {
+        // this shouldn not happen normally as the mode should already
+        // be changed during presenceHandler, but in case this is not
+        // done, such as when app is initially installed while away,
+        // and system is not in away mode, then we toggle it to away
+        // at the sun rise/set event.
+        changeMode(newAwayMode, " because no one is present")
+    } else {
+        // someone is home, we update the mode depending on
+        // sunrise/sunset.
+        if (state.currentSunMode == "sunRise") {
+            changeMode(newMode, " because it's sunrise")
+        } else if (state.currentSunMode == "sunSet") {
+            changeMode(newMode, " because it's sunset")
+        } else {
+            changeMode(newMode)
+        }
+    }
+}
+
+// ********** presence handling **********
+
+// event handler when presence sensor changes state
+def presenceHandler(evt)
+{
+    // get the device name that resulted in the change
+    state.eventDevice= evt.device?.displayName
+
+    // is setInitialMode() still pending?
+    if (state.pendingOp == "init") {
+        log.debug("Pending ${state.pendingOp} op still in progress, ignoring presence event")
+        return
+    }
+
+    if (evt.value == "not present") {
+        handleDeparture()
+    } else {
+        handleArrival()
+    }
+}
+
+def handleDeparture()
+{
+    log.info("${state.eventDevice} left ${location.name}")
+
+    // do nothing if someone's still home
+    if (!isEveryoneAway()) {
+        log.info("Someone is still present, no actions needed")
+        return
+    }
+
+    // Now we set away mode. We perform the following actions even if
+    // home is already in away mode because an arrival timer may be
+    // pending, and scheduling delaySetMode() has the nice effect of
+    // canceling any previous pending timer, which is what we want to
+    // do. So we do this even if delay is 0.
+    log.info("Scheduling ${newAwayMode} mode in " + state.awayDelay + "s")
+    state.pendingOp = "away"
+    state.timerDevice = state.eventDevice
+    // we always use runIn(). This has the benefit of automatically
+    // replacing any pending arrival/away timer. if any arrival timer
+    // is active, it will be clobbered with this away timer. If any
+    // away timer is active, it will be extended with this new timeout
+    // (though normally it should not happen)
+    runIn(state.awayDelay, "delaySetMode")
+}
+
+def handleArrival()
+{
+    // someone returned home, set home/night mode after delay
+    log.info("${state.eventDevice} arrived at ${location.name}")
+
+    def numHome = isAnyoneHome()
+    if (!numHome) {
+        // no one home, do nothing for now (should NOT happen)
+        log.warn("${deviceName} arrived, but isAnyoneHome() returned false!")
+        return
+    }
+
+    if (numHome > 1) {
+        // not the first one home, do nothing, as any action that
+        // should happen would've happened when the first sensor
+        // arrived. this is the opposite of isEveryoneAway() where we
+        // don't do anything if someone's still home.
+        log.debug("Someone is already present, no actions needed")
+        return
+    }
+
+    // check if any pending arrival timer is already active. we want
+    // the timer to trigger when the 1st person arrives, but not
+    // extended when the 2nd person arrives later. this should not
+    // happen because of the >1 check above, but just in case.
+    if (state.pendingOp == "arrive") {
+        log.debug("Pending ${state.pendingOp} op already in progress, do nothing")
+        return
+    }
+
+    // now we set home/night mode
+    log.info("Scheduling ${state.modeIfHome} mode in " + state.arrivalDelay + "s")
+    state.pendingOp = "arrive"
+    state.timerDevice = state.eventDevice
+    // if any away timer is active, it will be clobbered with
+    // this arrival timer
+    runIn(state.arrivalDelay, "delaySetMode")
+}
+
+
+// ********** helper functions **********
+
+// change the system to the new mode, unless its already in that mode.
+def changeMode(newMode, reason="")
+{
+    if (location.mode != newMode) {
+        // notification message
+        def message = "${location.name} changed mode from '${location.mode}' to '${newMode}'" + reason
+        setLocationMode(newMode)
+        send(message)  // send message after changing mode
+    } else {
+        log.debug("${location.name} is already in ${newMode} mode, no actions needed")
+    }
+}
+
+// create a useful departure/arrival reason string
+def reasonStr(isAway, delaySec, delayMin)
+{
+    def reason
+
+    // if we are invoked by timer, use the stored timer trigger
+    // device, otherwise use the last event device
+    if (state.timerDevice) {
+        reason = " because ${state.timerDevice} "
+    } else {
+        reason = " because ${state.eventDevice} "
+    }
+
+    if (isAway) {
+        reason += "left"
+    } else {
+        reason += "arrived"
+    }
+
+    if (delaySec) {
+        if (delaySec > 60) {
+            if (delayMin == null) {
+                delayMin = (int) delaySec / 60
+            }
+            reason += " ${delayMin} minutes ago"
+        } else {
+            reason += " ${delaySec}s ago"
+        }
+    }
+
+    return reason
+}
+
+// http://docs.smartthings.com/en/latest/smartapp-developers-guide/scheduling.html#schedule-from-now
+//
+// By default, if a method is scheduled to run in the future, and then
+// another call to runIn with the same method is made, the last one
+// overwrites the previously scheduled method.
+//
+// We use the above property to schedule our arrval/departure delay
+// using the same function so we don't have to worry about
+// arrival/departure timer firing independently and complicating code.
+def delaySetMode()
+{
+    def newMode = null
+    def reason = ""
+
+    // timer has elapsed, check presence status to figure out what we
+    // need to do
+    if (isEveryoneAway()) {
+        reason = reasonStr(true, state.awayDelay, awayThreshold)
+        newMode = newAwayMode
+        if (state.pendingOp) {
+            log.debug("${state.pendingOp} timer elapsed: everyone is away")
+        }
+    } else {
+        reason = reasonStr(false, state.arrivalDelay, arrivalThreshold)
+        newMode = state.modeIfHome
+        if (state.pendingOp) {
+            log.debug("${state.pendingOp} timer elapsed: someone is home")
+        }
+    }
+
+    // now change the mode
+    changeMode(newMode, reason);
+
+    state.pendingOp = null
+    state.timerDevice = null
+}
+
+private isEveryoneAway()
+{
+    def result = true
+
+    if (people.findAll { it?.currentPresence == "present" }) {
+        result = false
+    }
+    // log.debug("isEveryoneAway: ${result}")
+
+    return result
+}
+
+// return the number of people that are home
+private isAnyoneHome()
+{
+    def result = 0
+    // iterate over our people variable that we defined
+    // in the preferences method
+    for (person in people) {
+        if (person.currentPresence == "present") {
+            result++
+        }
+    }
+    return result
+}
+
+private send(msg)
+{
+    if (state.isPush) {
+        log.debug("Sending push notification")
+        sendPush(msg)
+    } else {
+        log.debug("Sending notification")
+        sendNotificationEvent(msg)
+    }
+    log.info(msg)
+}

smartapps/lock-auto-super-enhanced/enhanced-auto-lock-door.src/enhanced-auto-lock-door.groovy

@@ -13,7 +13,7 @@ preferences{
         input "lock1", "capability.lock", required: true
     }
     section("Select the door contact sensor:") {
-        input "contact", "capability.contactSensor", required: true
+    	input "contact", "capability.contactSensor", required: true
     }   
     section("Automatically lock the door when closed...") {
         input "minutesLater", "number", title: "Delay (in minutes):", required: true
@@ -22,10 +22,9 @@ preferences{
         input "secondsLater", "number", title: "Delay (in seconds):", required: true
     }
     section( "Notifications" ) {
-        input("recipients", "contact", title: "Send notifications to", required: false) {
+		input "sendPushMessage", "enum", title: "Send a push notification?", metadata:[values:["Yes", "No"]], required: false
-            input "phoneNumber", "phone", title: "Warn with text message (optional)", description: "Phone Number", required: false
+		input "phoneNumber", "phone", title: "Enter phone number to send text notification.", required: false
-        }
+	}
-    }
 }
 
 def installed(){
@@ -43,73 +42,55 @@ def initialize(){
     subscribe(lock1, "lock", doorHandler, [filterEvents: false])
     subscribe(lock1, "unlock", doorHandler, [filterEvents: false])  
     subscribe(contact, "contact.open", doorHandler)
-    subscribe(contact, "contact.closed", doorHandler)
+	subscribe(contact, "contact.closed", doorHandler)
 }
 
 def lockDoor(){
     log.debug "Locking the door."
     lock1.lock()
-    if(location.contactBookEnabled) {
+    log.debug ( "Sending Push Notification..." ) 
-        if ( recipients ) {
+    if ( sendPushMessage != "No" ) sendPush( "${lock1} locked after ${contact} was closed for ${minutesLater} minutes!" )
-            log.debug ( "Sending Push Notification..." ) 
+    log.debug("Sending text message...")
-            sendNotificationToContacts( "${lock1} locked after ${contact} was closed for ${minutesLater} minutes!", recipients)
+    if ( phoneNumber != "0" ) sendSms( phoneNumber, "${lock1} locked after ${contact} was closed for ${minutesLater} minutes!" )
-        }
-    }
-    if (phoneNumber) {
-        log.debug("Sending text message...")
-        sendSms( phoneNumber, "${lock1} locked after ${contact} was closed for ${minutesLater} minutes!")
-    }
 }
 
 def unlockDoor(){
     log.debug "Unlocking the door."
     lock1.unlock()
-    if(location.contactBookEnabled) {
+    log.debug ( "Sending Push Notification..." ) 
-        if ( recipients ) {
+    if ( sendPushMessage != "No" ) sendPush( "${lock1} unlocked after ${contact} was opened for ${secondsLater} seconds!" )
-            log.debug ( "Sending Push Notification..." ) 
+    log.debug("Sending text message...")
-            sendNotificationToContacts( "${lock1} unlocked after ${contact} was opened for ${secondsLater} seconds!", recipients)
+    if ( phoneNumber != "0" ) sendSms( phoneNumber, "${lock1} unlocked after ${contact} was opened for ${secondsLater} seconds!" )
-        }
-    }
-    if ( phoneNumber ) {
-        log.debug("Sending text message...")
-        sendSms( phoneNumber, "${lock1} unlocked after ${contact} was opened for ${secondsLater} seconds!")
-    }
 }
 
 def doorHandler(evt){
     if ((contact.latestValue("contact") == "open") && (evt.value == "locked")) { // If the door is open and a person locks the door then...  
-        //def delay = (secondsLater) // runIn uses seconds
+        def delay = (secondsLater) // runIn uses seconds
-        runIn( secondsLater, unlockDoor )   // ...schedule (in minutes) to unlock...  We don't want the door to be closed while the lock is engaged. 
+        runIn( delay, unlockDoor )   // ...schedule (in minutes) to unlock...  We don't want the door to be closed while the lock is engaged. 
     }
     else if ((contact.latestValue("contact") == "open") && (evt.value == "unlocked")) { // If the door is open and a person unlocks it then...
         unschedule( unlockDoor ) // ...we don't need to unlock it later.
-    }
+	}
     else if ((contact.latestValue("contact") == "closed") && (evt.value == "locked")) { // If the door is closed and a person manually locks it then...
         unschedule( lockDoor ) // ...we don't need to lock it later.
     }   
     else if ((contact.latestValue("contact") == "closed") && (evt.value == "unlocked")) { // If the door is closed and a person unlocks it then...
-       //def delay = (minutesLater * 60) // runIn uses seconds
+        def delay = (minutesLater * 60) // runIn uses seconds
-        runIn( (minutesLater * 60), lockDoor ) // ...schedule (in minutes) to lock.
+        runIn( delay, lockDoor ) // ...schedule (in minutes) to lock.
     }
     else if ((lock1.latestValue("lock") == "unlocked") && (evt.value == "open")) { // If a person opens an unlocked door...
         unschedule( lockDoor ) // ...we don't need to lock it later.
     }
     else if ((lock1.latestValue("lock") == "unlocked") && (evt.value == "closed")) { // If a person closes an unlocked door...
-        //def delay = (minutesLater * 60) // runIn uses seconds
+        def delay = (minutesLater * 60) // runIn uses seconds
-        runIn( (minutesLater * 60), lockDoor ) // ...schedule (in minutes) to lock.
+        runIn( delay, lockDoor ) // ...schedule (in minutes) to lock.
-    }
+	}
     else { //Opening or Closing door when locked (in case you have a handle lock)
-        log.debug "Unlocking the door."
+    	log.debug "Unlocking the door."
-        lock1.unlock()
+		lock1.unlock()
-        if(location.contactBookEnabled) {
+        log.debug ( "Sending Push Notification..." ) 
-            if ( recipients ) {
+    	if ( sendPushMessage != "No" ) sendPush( "${lock1} unlocked after ${contact} was opened or closed when ${lock1} was locked!" )
-                log.debug ( "Sending Push Notification..." ) 
+        log.debug("Sending text message...")
-                sendNotificationToContacts( "${lock1} unlocked after ${contact} was opened or closed when ${lock1} was locked!", recipients)
+    	if ( phoneNumber != "0" ) sendSms( phoneNumber, "${lock1} unlocked after ${contact} was opened or closed when ${lock1} was locked!" )
-            }
+		}
-        }
-        if ( phoneNumber ) {
-            log.debug("Sending text message...")
-            sendSms( phoneNumber, "${lock1} unlocked after ${contact} was opened or closed when ${lock1} was locked!")
-        }
-    }
 }

smartapps/smartsolutionsv2/sleeping/smart-sleep.src/smart-sleep.groovy

@@ -1,101 +0,0 @@
-/**
- *  Sleep Wizard
- *
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Smart Sleep",
-    namespace: "smartsolutionsv2/sleeping",
-    author: "SmartThings",
-    description: "Create rules to control devices based on a sleep sensor, including in bed, out of bed, sleeping, and not sleeping.",
-    category: "My Apps",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/ModeMagic/Cat-ModeMagic.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/ModeMagic/Cat-ModeMagic@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/ModeMagic/Cat-ModeMagic@3x.png",
-    singleInstance: true
-)
-
-preferences {
-	page(name: "main", title: getLabel("str_Title"), install: true, uninstall: true) {
-    	section {
-        	app(name: "smartsleepautomation", appName: "Smart Sleep Automation", namespace: "smartsolutionsv2/sleeping", title: getLabel("str_SectionTitle"), multiple: true, uninstall: true)
-        }
-    }
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-	initialize()
-}
-
-def initialize() {
-	def numChildApps = getChildApps().size();
-    def text = "${numChildApps} rules configured";
-    sendEvent(
-    	linkText: numChildApps.toString(),
-        descriptionText: next,
-        eventType: "SOLUTION_SUMMARY",
-        name: "summary",
-        value: numChildApps,
-        data: [["icon": "indicator-dot-gray", "iconColor": "#878787", "value":text]],
-        displayed: false
-    );
-}
-
-cards {
-	card("Action History") {
-    	tiles {
-        	eventTile { }
-        }
-    }
-}
-
-def getLabel(value)
-{
-    def str_Title=[
-            "kr": "룰",
-            "us": "Rules"
-    ]
-
-    def str_SectionTitle=[
-            "kr": "새로운 자동화 룰 만들기",
-            "us": "New Smart Sleep Automation"
-    ]
-
-    if(clientLocale?.language == "ko")
-    {
-        switch(value)
-        {
-            case "str_Title":
-                return str_Title["kr"]
-            case "str_SectionTitle":
-                return str_SectionTitle["kr"]
-        }
-    }
-    else
-    {
-        switch(value)
-        {
-            case "str_Title":
-                return str_Title["us"]
-            case "str_SectionTitle":
-                return str_SectionTitle["us"]
-        }
-    }
-    return "Unknown"
-}

smartapps/smartthings/bose-soundtouch-control.src/bose-soundtouch-control.groovy

@@ -22,9 +22,9 @@ definition(
     author: "SmartThings & Joe Geiger",
     description: "Control your Bose® SoundTouch® when certain actions take place in your home.",
     category: "SmartThings Labs",
-    iconUrl: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon.png",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png",
-    iconX3Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x-1.png"
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png"
 )
 
 preferences {

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -258,8 +258,8 @@ def installed() {
 
 def updated() {
 	log.trace "Updated with settings: ${settings}"
+    unschedule()
 	unsubscribe() 
-    unschedule()    
 	initialize()
 }
 
@@ -325,7 +325,6 @@ def addBulbs() {
                     } else {
                         d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
                     }
-                    log.debug "created ${d.displayName} with id $dni"
                 } else {
                 	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
                 }
@@ -334,6 +333,8 @@ def addBulbs() {
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.hub, ["label":newHueBulb?.name])
 			}
+
+			log.debug "created ${d.displayName} with id $dni"
 			d.refresh()
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
@@ -774,4 +775,4 @@ private Boolean hasAllHubsOver(String desiredFirmware) {
 
 private List getRealHubFirmwareVersions() {
 	return location.hubs*.firmwareVersionString.findAll { it }
-}
+}