MSA-916: This Device Type and SmartApp integrated the Garadget Device Type enable integration of Smartthings With the Garadget Devices

devicetypes/fuzzysb/garadget.src/garadget.groovy

@@ -0,0 +1,406 @@
+/**
+ *  Garadget Device Handler
+ *
+ *  Copyright 2016 Stuart Buchanan based loosely based on original code by Krishnaraj Varma with thanks
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ * 12/02/2016 V1.3 updated with to remove token and DeviceId parameters from inputs to retrieving from dni
+ */
+ 
+ 
+import groovy.json.JsonOutput
+
+preferences {
+	input("prdt", "text", title: "sensor scan interval in mS (default: 1000)")
+	input("pmtt", "text", title: "door moving time in mS(default: 10000)")
+	input("prlt", "text", title: "button press time mS (default: 300)")
+	input("prlp", "text", title: "delay between consecutive button presses in mS (default: 1000)")
+	input("psrr", "text", title: "number of sensor reads used in averaging (default: 3)")
+	input("psrt", "text", title: "reflection threshold below which the door is considered open (default: 25)")
+	input("paot", "text", title: "alert for open timeout in seconds (default: 320)")
+	input("pans", "text", title: " alert for night time start in minutes from midnight (default: 1320)")
+	input("pane", "text", title: " alert for night time end in minutes from midnight (default: 360)")	
+}
+
+metadata {
+	definition (name: "Garadget", namespace: "fuzzysb", author: "Stuart Buchanan") {
+			
+        capability "Switch"
+		capability "Contact Sensor"
+        capability "Signal Strength"
+		capability "Actuator"
+		capability "Sensor"
+        capability "Refresh"
+        capability "Polling"
+		capability "Configuration"
+		
+        attribute "reflection", "string"
+        attribute "status", "string"
+        attribute "time", "string"
+        attribute "lastAction", "string"
+        attribute "reflection", "string"
+        attribute "ver", "string"
+		
+        command "stop"
+		command "statusCommand"
+		command "setConfigCommand"
+		command "doorConfigCommand"
+		command "netConfigCommand"
+	}
+
+	simulator {
+		
+	}
+
+tiles(scale: 2) {
+    multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
+        tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
+            attributeState "open", label:'${name}', action:"switch.off", icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e"
+            attributeState "opening", label:'${name}', icon:"st.doors.garage.garage-opening", backgroundColor:"#ffa81e"
+            attributeState "closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#6699ff"
+            attributeState "closed", label:'${name}', action:"switch.on", icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821"
+        }
+		tileAttribute ("device.lastAction", key: "SECONDARY_CONTROL") {
+				attributeState "default", label: 'Time In State: ${currentValue}'
+		}
+    }
+	standardTile("contact", "device.contact", width: 1, height: 1) {
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+		}
+    valueTile("reflection", "reflection", decoration: "flat", width: 2, height: 1) {
+    		state "reflection", label:'Reflection\r\n${currentValue}%'
+		}
+    valueTile("rssi", "device.rssi", decoration: "flat", width: 1, height: 1) {
+    		state "rssi", label:'Wifi\r\n${currentValue} dBm', unit: "",backgroundColors:[
+            		[value: 16, color: "#5600A3"],
+					[value: -31, color: "#153591"],
+					[value: -44, color: "#1e9cbb"],
+					[value: -59, color: "#90d2a7"],
+					[value: -74, color: "#44b621"],
+					[value: -84, color: "#f1d801"],
+					[value: -95, color: "#d04e00"],
+					[value: -96, color: "#bc2323"]
+				]
+		}
+    standardTile("refresh", "refresh", inactiveLabel: false, decoration: "flat") {
+            state "default", action:"polling.poll", icon:"st.secondary.refresh"
+        }
+    standardTile("stop", "stop") {
+        	state "default", label:"", action: "stop", icon:"http://cdn.device-icons.smartthings.com/sonos/stop-btn@2x.png"
+        }   
+    valueTile("ip", "ip", decoration: "flat", width: 2, height: 1) {
+    		state "ip", label:'IP Address\r\n${currentValue}'
+		}
+    valueTile("ssid", "ssid", decoration: "flat", width: 2, height: 1) {
+    		state "ssid", label:'Wifi SSID\r\n${currentValue}'
+		}
+	valueTile("ver", "ver", decoration: "flat", width: 1, height: 1) {
+    		state "ver", label:'Version\r\n${currentValue}'
+		}
+	standardTile("configure", "device.button", width: 1, height: 1, decoration: "flat") {
+        	state "default", label: "", backgroundColor: "#ffffff", action: "configure", icon:"st.secondary.configure"
+		}
+        
+        main "status"
+		details(["status", "contact", "reflection", "ver", "configure", "lastAction", "rssi", "stop", "ip", "ssid", "refresh"])
+	}
+}
+
+// handle commands
+def poll() {
+	log.debug "Executing 'poll'"
+    refresh()
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+    statusCommand()
+    netConfigCommand()
+    doorConfigCommand()
+    
+}
+
+def configure() {
+	log.debug "Resetting Sensor Parameters to SmartThings Compatible Defaults"
+	SetConfigCommand()	
+}
+
+// Parse incoming device messages to generate events
+private parseDoorStatusResponse(resp) {
+    log.debug("Executing parseDoorStatusResponse: "+resp.data)
+    log.debug("Output status: "+resp.status)
+    if(resp.status == 200) {
+        log.debug("returnedresult: "+resp.data.result)
+        def results = (resp.data.result).tokenize('|')
+        def statusvalues = (results[0]).tokenize('=')
+        def timevalues = (results[1]).tokenize('=')
+        def sensorvalues = (results[2]).tokenize('=')
+        def signalvalues = (results[3]).tokenize('=')
+        def status = statusvalues[1]
+        sendEvent(name: 'status', value: status)
+        if(status == "open" || status == "closed"){
+        	sendEvent(name: 'contact', value: status)
+            }
+        def time = timevalues[1]
+        sendEvent(name: 'lastAction', value: time)
+        def sensor = sensorvalues[1]
+        sendEvent(name: 'reflection', value: sensor)
+        def signal = signalvalues[1]
+        sendEvent(name: 'rssi', value: signal)
+        
+    }else if(resp.status == 201){
+        log.debug("Something was created/updated")
+    }
+}
+
+private parseDoorConfigResponse(resp) {
+    log.debug("Executing parseResponse: "+resp.data)
+    log.debug("Output status: "+resp.status)
+    if(resp.status == 200) {
+        log.debug("returnedresult: "+resp.data.result)
+        def results = (resp.data.result).tokenize('|')
+        def vervalues = (results[0]).tokenize('=')
+        def rdtvalues = (results[1]).tokenize('=')
+        def mttvalues = (results[2]).tokenize('=')
+        def rltvalues = (results[3]).tokenize('=')
+        def rlpvalues = (results[4]).tokenize('=')
+        def srrvalues = (results[5]).tokenize('=')
+        def srtvalues = (results[6]).tokenize('=')
+        def aotvalues = (results[7]).tokenize('=')
+        def ansvalues = (results[8]).tokenize('=')
+        def anevalues = (results[9]).tokenize('=')
+        def ver = vervalues[1]
+        sendEvent(name: 'ver', value: ver)
+        log.debug("Firmware Version: "+ver)
+        def rdt = rdtvalues[1]
+        log.debug("Sensor Scan Interval (ms): "+rdt )
+        def mtt = mttvalues[1]
+		state.mtt = mtt
+		sendEvent(name: 'mtt', value: mtt)
+        log.debug("Door Moving Time (ms): "+mtt )
+        def rlt = rltvalues[1]
+        log.debug("Button Press Time (ms): "+rlt )
+        def rlp = rlpvalues[1]
+        log.debug("Delay Between Consecutive Button Presses (ms): "+rlp )
+        def srr = srrvalues[1]
+        log.debug("number of sensor reads used in averaging: "+srr )
+        def srt = srtvalues[1]
+        log.debug("reflection threshold below which the door is considered open: "+srt )
+        def aot = aotvalues[1]
+        log.debug("alert for open timeout in seconds: "+aot )
+        def ans = ansvalues[1]
+        log.debug("alert for night time start in minutes from midnight: "+ans )
+        def ane = anevalues[1]
+        log.debug("alert for night time end in minutes from midnight: "+ane )
+        
+    }else if(resp.status == 201){
+        log.debug("Something was created/updated")
+    }
+}
+
+private parseNetConfigResponse(resp) {
+    log.debug("Executing parseResponse: "+resp.data)
+    log.debug("Output status: "+resp.status)
+    if(resp.status == 200) {
+        log.debug("returnedresult: "+resp.data.result)
+        def results = (resp.data.result).tokenize('|')
+        def ipvalues = (results[0]).tokenize('=')
+        def snetvalues = (results[1]).tokenize('=')
+        def dgwvalues = (results[2]).tokenize('=')
+        def macvalues = (results[3]).tokenize('=')
+        def ssidvalues = (results[4]).tokenize('=')
+        def ip = ipvalues[1]
+        sendEvent(name: 'ip', value: ip)
+        log.debug("IP Address: "+ip)
+        def snet = snetvalues[1]
+        log.debug("Subnet Mask: "+snet)
+        def dgw = dgwvalues[1]
+        log.debug("Default Gateway: "+dgw)
+        def mac = macvalues[1]
+        log.debug("Mac Address: "+mac)
+        def ssid = ssidvalues[1]
+        sendEvent(name: 'ssid', value: ssid)
+        log.debug("Wifi SSID : "+ssid)
+    }else if(resp.status == 201){
+        log.debug("Something was created/updated")
+    }
+}
+
+private parseResponse(resp) {
+    log.debug("Executing parseResponse: "+resp.data)
+    log.debug("Output status: "+resp.status)
+    if(resp.status == 200) {
+        log.debug("Executing parseResponse.successTrue")
+        def id = resp.data.id
+        def name = resp.data.name
+        def connected = resp.data.connected
+		def returnValue = resp.data.return_value	
+    }else if(resp.status == 201){
+        log.debug("Something was created/updated")
+    }
+}
+
+private getDeviceDetails() {
+def fullDni = device.deviceNetworkId
+return fullDni
+}
+
+private sendCommand(method, args = []) {
+	def DefaultUri = "https://api.particle.io"
+    def cdni = getDeviceDetails().tokenize(':')
+	def deviceId = cdni[0] 
+	def token = cdni[1]
+    def methods = [
+		'doorStatus': [
+					uri: "${DefaultUri}",
+					path: "/v1/devices/${deviceId}/doorStatus",
+					requestContentType: "application/json",
+					query: [access_token: token]  
+                    ],
+        'doorConfig': [
+					uri: "${DefaultUri}",
+					path: "/v1/devices/${deviceId}/doorConfig",
+					requestContentType: "application/json",
+					query: [access_token: token] 
+                    ],
+		'netConfig': [	
+					uri: "${DefaultUri}",
+					path: "/v1/devices/${deviceId}/netConfig",
+					requestContentType: "application/json",
+					query: [access_token: token]
+                   	],
+		'setState': [	
+					uri: "${DefaultUri}",
+					path: "/v1/devices/${deviceId}/setState",
+					requestContentType: "application/json",
+                    query: [access_token: token],
+					body: args[0]
+                   	],
+		'setConfig': [	
+					uri: "${DefaultUri}",
+					path: "/v1/devices/${deviceId}/setConfig",
+					requestContentType: "application/json",
+                    query: [access_token: token],
+					body: args[0]
+                   	]
+	]
+
+	def request = methods.getAt(method)
+    
+    log.debug "Http Params ("+request+")"
+    
+    try{
+        log.debug "Executing 'sendCommand'"
+        
+        if (method == "doorStatus"){
+            httpGet(request) { resp ->            
+                parseDoorStatusResponse(resp)
+            }
+        }else if (method == "doorConfig"){
+			log.debug "calling doorConfig Method"
+            httpGet(request) { resp ->            
+                parseDoorConfigResponse(resp)
+            }
+		}else if (method == "netConfig"){
+			log.debug "calling netConfig Method"
+            httpGet(request) { resp ->            
+                parseNetConfigResponse(resp)
+            }
+        }else if (method == "setState"){
+            log.debug "calling setState Method"
+            httpPost(request) { resp ->            
+                parseResponse(resp)
+			}
+        }else if (method == "setConfig"){
+            log.debug "calling setState Method"
+            httpPost(request) { resp ->            
+                 parseResponse(resp)
+            }
+        }else{
+            httpGet(request)
+        }
+    } catch(Exception e){
+        log.debug("___exception: " + e)
+    }
+}
+
+
+def on() {
+	log.debug "Executing 'on'"
+	openCommand()
+    statusCommand()
+    log.info("waiting for ${state.mtt} ms")
+	"delay ${state.mtt}"
+    log.info("Initiating Refresh after Transition time")
+	statusCommand()
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	closeCommand()
+    statusCommand()
+    log.info("waiting for ${state.mtt} ms")
+	"delay ${state.mtt}"
+    log.info("Initiating Refresh after Transition time")
+	statusCommand()
+}
+
+def stop(){
+	log.debug "Executing 'sendCommand.setState'"
+    def jsonbody = new groovy.json.JsonOutput().toJson(arg:"stop")
+	sendCommand("setState",[jsonbody])
+    statusCommand()
+}
+
+def statusCommand(){
+	log.debug "Executing 'sendCommand.statusCommand'"
+	sendCommand("doorStatus",[])
+}
+
+def openCommand(){
+	log.debug "Executing 'sendCommand.setState'"
+    def jsonbody = new groovy.json.JsonOutput().toJson(arg:"open")
+	sendCommand("setState",[jsonbody])
+}
+
+def closeCommand(){
+	log.debug "Executing 'sendCommand.setState'"
+	def jsonbody = new groovy.json.JsonOutput().toJson(arg:"close")
+	sendCommand("setState",[jsonbody])
+}
+
+def doorConfigCommand(){
+	log.debug "Executing 'sendCommand.doorConfig'"
+	sendCommand("doorConfig",[])
+}
+
+def SetConfigCommand(){
+	def crdt = prdt ?: 1000
+	def cmtt = pmtt ?: 10000
+	def crlt = prlt ?: 300
+	def crlp = prlp ?: 1000
+	def csrr = psrr ?: 3
+	def csrt = psrt ?: 25
+	def caot = paot ?: 320
+	def cans = pans ?: 1320
+	def cane = pane ?: 360
+	log.debug "Executing 'sendCommand.setConfig'"
+	def jsonbody = new groovy.json.JsonOutput().toJson(arg:"rdt=" + crdt +"|mtt=" + cmtt + "|rlt=" + crlt + "|rlp=" + crlp +"|srr=" + csrr + "|srt=" + csrt)
+	sendCommand("setConfig",[jsonbody])
+    jsonbody = new groovy.json.JsonOutput().toJson(arg:"aot=" + caot + "|ans=" + cans + "|ane=" + cane)
+    sendCommand("setConfig",[jsonbody])
+}
+
+def netConfigCommand(){
+	log.debug "Executing 'sendCommand.netConfig'"
+	sendCommand("netConfig",[])
+}

devicetypes/fuzzysb/zipato-ph-pse02-eu.src/zipato-ph-pse02-eu.groovy

@@ -1,262 +0,0 @@
-/**
- *  Copyright 2015 Stuart Buchanan
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *	Zipato/Phileo PH-PSE02-EU Siren
- *
- *	Author: fuzzysb
- *	Date: 2015-01-05
- */
- preferences {
- input "defaultSound", "enum", title: "Default Sound to use for the Siren?", options: ["Emergency","FireAlarm","Ambulance","PoliceCar","DoorChime"], required: false, defaultValue: "Emergency"
-}
- 
- 
-metadata {
- definition (name: "Zipato PH-PSE02-EU", namespace: "fuzzysb", author: "Stuart Buchanan") {
-	capability "Actuator"
-	capability "Alarm"
-	capability "Switch"
-	capability "Configuration"
-
-	command "Emergency"
-	command "FireAlarm"
-	command "Ambulance"
-	command "PoliceCar"
-	command "DoorChime"
-    
-	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x71,0x20,0x25,0x85,0x70,0x72,0x86,0x30,0x59,0x73,0x5A,0x98,0x7A"
- }
-
-simulator {
-
-}
-
- tiles(scale: 2) {
-	multiAttributeTile(name:"alarm", type: "generic", width: 6, height: 4){
-		tileAttribute ("device.alarm", key: "PRIMARY_CONTROL") {
-			attributeState "off", label:'off', action:'alarm.siren', icon:"st.alarm.alarm.alarm", backgroundColor:"#ffffff"
-			attributeState "both", label:'alarm!', action:'alarm.off', icon:"st.alarm.alarm.alarm", backgroundColor:"#e86d13"
-		}
-	}
-	standardTile("Emergency", "device.button", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
-		state "default", label:'Emergency', action:"Emergency", icon:"st.Weather.weather1"
-	}
-	standardTile("FireAlarm", "device.button", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
-		state "default", label:'Fire Alarm', action:"FireAlarm", icon:"st.Outdoor.outdoor10"
-	}
-	standardTile("Ambulance", "device.button", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
-		state "default", label:'Ambulance', action:"Ambulance", icon:"st.Transportation.transportation2"
-	}
-	standardTile("PoliceCar", "device.button", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
-		state "default", label:'Police Car', action:"PoliceCar", icon:"st.Transportation.transportation8"
-	}
-	standardTile("DoorChime", "device.button", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
-		state "default", label:'Door Chime', action:"DoorChime", icon:"st.Home.home30"
-	}
-	standardTile("off", "device.button", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
-		state "default", label:'', action:"alarm.off", icon:"st.secondary.off"
-	}
-	main "alarm"
-	details(["alarm", "Emergency", "FireAlarm", "Ambulance", "PoliceCar", "DoorChime", "off"])
- }
-}
-
-def parse(String description)
-{
-	def result = null
-	if (description.startsWith("Err 106")) {
-		state.sec = 0
-		result = createEvent( name: "secureInclusion", value: "failed", isStateChange: true,
-			descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
-	} else if (description != "updated") {
-		def cmd = zwave.parse(description, [0x20: 1, 0x25: 1, 0x26: 1, 0x70: 1, 0x80: 1])
-		if (cmd) {
-			result = zwaveEvent(cmd)
-            log.debug "Parse returned ${result?.inspect()}"
-            		} else {
-			log.debug("Couldn't zwave.parse '$description'")
-			null
-		}
-		
-	}
-	log.debug "Parsed '${description}' to ${result.inspect()}"
-	return result
-}
-
-
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 3, 0x26: 3, 0x70: 1, 0x80: 1])
-	state.sec = 1
-	log.debug "encapsulated: ${encapsulatedCommand}"
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand)
-	} else {
-		log.warn "Unable to extract encapsulated cmd from $cmd"
-		createEvent(descriptionText: cmd.toString())
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupportedReport cmd) {
-	response(configure())
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
-    log.debug "---CONFIGURATION REPORT V2--- ${device.displayName} parameter ${cmd.parameterNumber} with a byte size of ${cmd.size} is set to ${cmd.configurationValue}"
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd)
-{
-	[name: "switch", value: cmd.value ? "on" : "off", type: "digital", displayed: true, isStateChange: true]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	log.debug "rx $cmd"
-	[
-		createEvent([name: "switch", value: cmd.value ? "on" : "off", displayed: false]),
-		createEvent([name: "alarm", value: cmd.value ? "both" : "off"])
-	]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
-	createEvent(name:"Alarm", cmd.sensorValue ? "on" : "off")
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
-if (cmd.notificationType == 6 && cmd.event == 22) {
-		log.debug "Playing Door Chime"
-	} else if (cmd.notificationType == 10 && cmd.event == 1) {
-		log.debug "Playing Police Car"
-	} else if (cmd.notificationType == 10 && cmd.event == 3) {
-    	log.debug "Playing Ambulance"
-    } else if (cmd.notificationType == 10 && cmd.event == 2) {
-    	log.debug "Playing Fire Alarm"
-    } else if (cmd.notificationType == 7 && cmd.event == 1) {
-    	log.debug "Playing Emergency"
-    }
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	log.debug "Unhandled: $cmd"
-    createEvent(descriptionText: cmd.toString(), isStateChange: false)
-}
-
-def strobe() {
-	on()
-}
-
-def siren() {
-	on()
-}
-
-def both() {
-	on()
-}
-
-
-def on() {
-	log.debug("Sounding Siren")
-	switch ( settings.defaultSound ) {
-		case "Emergency":
-		Emergency()
-		break
-		
-		case "FireAlarm":
-		FireAlarm()
-		break
-		
-		case "Ambulance":
-		Ambulance()
-		break
-		
-		case "PoliceCar":
-		PoliceCar()
-		break
-		
-		case "DoorChime":
-		DoorChime()
-		break
-		
-		default:
-		Emergency()
-		break
-	}
-}
-
-def off() {
-	log.debug "sending off"
-	[
-		secure(zwave.basicV1.basicSet(value: 0x00)),
-		secure(zwave.basicV1.basicGet())
-	]
-}
-
-def Emergency() {
-	log.debug "Sounding Siren With Emergency"
-	[
-		secure(zwave.notificationV3.notificationReport(event: 0x01, notificationType: 0x07)),
-		secure(zwave.basicV1.basicGet())
-	]
-}
-
-def FireAlarm() {
-	log.debug "Sounding Siren With Fire Alarm"
-	[
-		secure(zwave.notificationV3.notificationReport(event: 0x02, notificationType: 0x0A)),
-        secure(zwave.basicV1.basicGet())
-	]
-}
-
-def Ambulance() {
-	log.debug "Sounding Siren With Ambulance"
-	[
-		secure(zwave.notificationV3.notificationReport(event: 0x03, notificationType: 0x0A)),
-        secure(zwave.basicV1.basicGet())
-	]
-}
-
-def PoliceCar() {
-	log.debug "Sounding Siren With Police Car"
-	[
-		secure(zwave.notificationV3.notificationReport(event: 0x01, notificationType: 0x0A)),
-        secure(zwave.basicV1.basicGet())
-	]
-}
-
-def DoorChime() {
-	log.debug "Sounding Siren With Door Chime"
-	[
-		secure(zwave.notificationV3.notificationReport(event: 0x16, notificationType: 0x06)),
-        secure(zwave.basicV1.basicGet())
-	]
-}
-
-def configure() {
-	log.debug "Resetting Siren Parameters to SmartThings Compatible Defaults"
-	def cmds = []
-    
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1)
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 29, size: 1)
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [6], parameterNumber: 31, size: 1)
-    
-    delayBetween(cmds, 500)
-}
-
-private secure(physicalgraph.zwave.Command cmd) {
-	if (state.sec) {
-         log.debug "Sending Secure Command $cmd"
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	} else {
-    	log.debug "Sending Insecure Command $cmd"
-		cmd.format()
-	}
-}

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -44,7 +44,7 @@ metadata {
                 attributeState "power", label:'${currentValue} W'
             }
         }
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
         main "switch"

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -39,7 +39,7 @@ metadata {
                 attributeState "level", action:"switch level.setLevel"
             }
         }
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
         main "switch"

devicetypes/smartthings/zigbee-hue-bulb.src/zigbee-hue-bulb.groovy

@@ -63,7 +63,7 @@ metadata {
 			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 		controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -52,7 +52,7 @@
 		valueTile("battery", "device.battery", inactiveLabel:false, decoration:"flat", width:2, height:2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-		standardTile("refresh", "device.refresh", inactiveLabel:false, decoration:"flat", width:2, height:2) {
+		standardTile("refresh", "device.lock", inactiveLabel:false, decoration:"flat", width:2, height:2) {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -57,7 +57,7 @@ metadata {
         valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "colorTemperature", label: '${currentValue} K'
         }
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -40,7 +40,7 @@ metadata {
                 attributeState "power", label:'${currentValue} W'
             }
         }
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
         main "switch"

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -42,7 +42,7 @@ metadata {
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
         }
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
         main "switch"

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -54,7 +54,7 @@ metadata {
             }
         }
 
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 

smartapps/fuzzysb/garadget-connect.src/garadget-connect.groovy

@@ -0,0 +1,404 @@
+/**
+ *  Garadget Connect
+ *
+ *  Copyright 2016 Stuart Buchanan
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+ import java.text.DecimalFormat
+ import groovy.json.JsonSlurper
+ import groovy.json.JsonOutput
+ 
+private apiUrl() 			{ "https://api.particle.io" }
+private getVendorName() 	{ "Garadget" }
+private getVendorTokenPath(){ "https://api.particle.io/oauth/token" }
+private getVendorIcon()		{ "https://dl.dropboxusercontent.com/s/lkrub180btbltm8/garadget_128.png" }
+private getClientId() 		{ appSettings.clientId }
+private getClientSecret() 	{ appSettings.clientSecret }
+private getServerUrl() 		{ if(!appSettings.serverUrl){return getApiServerUrl()} }
+
+ 
+ // Automatically generated. Make future change here.
+definition(
+    name: "Garadget (Connect)",
+    namespace: "fuzzysb",
+    author: "Stuart Buchanan",
+    description: "Garadget Integration",
+    category: "SmartThings Labs",
+	iconUrl:   "https://dl.dropboxusercontent.com/s/lkrub180btbltm8/garadget_128.png", 
+	iconX2Url: "https://dl.dropboxusercontent.com/s/w8tvaedewwq56kr/garadget_256.png",
+	iconX3Url: "https://dl.dropboxusercontent.com/s/5hiec37e0y5py06/garadget_512.png",
+    oauth: true,
+    singleInstance: true
+) {
+    appSetting "serverUrl"
+}
+
+preferences {
+	page(name: "startPage", title: "Garadget Integration", content: "startPage", install: false)
+	page(name: "Credentials", title: "Fetch OAuth2 Credentials", content: "authPage", install: false)
+    page(name: "mainPage", title: "Garadget Integration", content: "mainPage")
+    page(name: "completePage", title: "${getVendorName()} is now connected to SmartThings!", content: "completePage")
+	page(name: "listDevices", title: "Garadget Devices", content: "listDevices", install: false)
+    page(name: "badCredentials", title: "Invalid Credentials", content: "badAuthPage", install: false)
+}
+
+mappings {
+	path("/receivedToken"){action: [POST: "receivedToken", GET: "receivedToken"]}
+}
+
+def startPage() {
+    if (state.garadgetAccessToken) { return mainPage() }
+    else { return authPage() }
+}
+
+def mainPage(){
+	
+	def result = [success:false]
+    
+    
+	if (!state.garadgetAccessToken) {
+    	createAccessToken()
+       	log.debug "About to create Smarthings Garadget access token."
+        getToken(garadgetUsername, garadgetPassword)
+    } 
+    if (state.garadgetAccessToken){
+    	result.success = true
+    }
+
+
+    if(result.success == true) {
+           		return completePage()
+	} else {
+    			return badAuthPage()
+	}
+}
+
+
+
+def completePage(){
+	def description = "Tap 'Next' to proceed"
+			return dynamicPage(name: "completePage", title: "Credentials Accepted!", nextPage: listDevices , uninstall: true, install:false) {
+				section { href url: buildRedirectUrl("receivedToken"), style:"embedded", required:false, title:"${getVendorName()} is now connected to SmartThings!", description:description }
+			}
+}
+
+def badAuthPage(){
+	log.debug "In badAuthPage"
+    log.error "login result false"
+       		return dynamicPage(name: "badCredentials", title: "Garadget", install:false, uninstall:true, nextPage: Credentials) {
+				section("") {
+					paragraph "Please check your username and password"
+           		}
+            }
+}
+    
+def authPage() {
+	log.debug "In authPage"
+	if(canInstallLabs()) {
+		def description = null
+
+		
+			log.debug "Prompting for Auth Details."
+
+			description = "Tap to enter Credentials."
+
+			return dynamicPage(name: "Credentials", title: "Authorize Connection", nextPage: mainPage, uninstall: false , install:false) {
+			section("Generate Username and Password") {
+				input "garadgetUsername", "text", title: "Your Garadget Username", required: true
+				input "garadgetPassword", "password", title: "Your Garadget Password", required: true
+				}
+			}
+	}
+	else
+	{
+		def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date.
+
+To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
+
+
+		return dynamicPage(name:"Credentials", title:"Upgrade needed!", nextPage:"", install:false, uninstall: true) {
+			section {
+				paragraph "$upgradeNeeded"
+			}
+		}
+
+	}
+}
+
+def createChildDevice(deviceFile, dni, name, label) {
+	log.debug "In createChildDevice"
+    try{
+		def childDevice = addChildDevice("fuzzysb", deviceFile, dni, null, [name: name, label: label, completedSetup: true])
+	} catch (e) {
+		log.error "Error creating device: ${e}"
+	}
+}
+
+def listDevices() {
+	log.debug "In listDevices"
+
+	def options = getDeviceList()
+
+	dynamicPage(name: "listDevices", title: "Choose devices", install: true) {
+		section("Devices") {
+			input "devices", "enum", title: "Select Device(s)", required: false, multiple: true, options: options, submitOnChange: true
+		}
+	}
+}
+
+def buildRedirectUrl(endPoint) {
+	log.debug "In buildRedirectUrl"
+	log.debug("returning: " + getServerUrl() + "/api/token/${state.accessToken}/smartapps/installations/${app.id}/${endPoint}")
+	return getServerUrl() + "/api/token/${state.accessToken}/smartapps/installations/${app.id}/${endPoint}"
+}
+
+def receivedToken() {
+	log.debug "In receivedToken"
+
+	def html = """
+        <!DOCTYPE html>
+        <html>
+        <head>
+        <meta name="viewport" content="width=device-width, initial-scale=1">
+        <title>${getVendorName()} Connection</title>
+        <style type="text/css">
+            * { box-sizing: border-box; }
+            @font-face {
+                font-family: 'Swiss 721 W01 Thin';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            @font-face {
+                font-family: 'Swiss 721 W01 Light';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            .container {
+                width: 560px;
+                padding: 40px;
+                /*background: #eee;*/
+                text-align: center;
+            }
+            img {
+                vertical-align: middle;
+            }
+            img:nth-child(2) {
+                margin: 0 30px;
+            }
+            p {
+                font-size: 2.2em;
+                font-family: 'Swiss 721 W01 Thin';
+                text-align: center;
+                color: #666666;
+                margin-bottom: 0;
+            }
+        /*
+            p:last-child {
+                margin-top: 0px;
+            }
+        */
+            span {
+                font-family: 'Swiss 721 W01 Light';
+            }
+        </style>
+        </head>
+        <body>
+            <div class="container">
+                <img src=""" + getVendorIcon() + """ alt="Vendor icon" />
+                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
+                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
+                <p>Tap 'Done' to continue to Devices.</p>
+			</div>
+        </body>
+        </html>
+        """
+	render contentType: 'text/html', data: html
+}
+
+def getDeviceList() {
+	def garadgetDevices = []
+    
+    httpGet( apiUrl() + "/v1/devices?access_token=${state.garadgetAccessToken}"){ resp ->
+    	def restDevices = resp.data
+		restDevices.each { garadget ->
+        	if (garadget.connected == true)
+                garadgetDevices << ["${garadget.id}|${garadget.name}":"${garadget.name}"]
+            }			
+        	
+	}
+	return garadgetDevices.sort()
+
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	unschedule()
+	initialize()
+}
+
+def uninstalled() {
+  log.debug "Uninstalling Garadget (Connect)"
+  deleteToken()
+  removeChildDevices(getChildDevices())
+  log.debug "Garadget (Connect) Uninstalled"
+  
+}
+
+def initialize() {
+	log.debug "Initialized with settings: ${settings}"
+	// Pull the latest device info into state
+	getDeviceList();
+    def children = getChildDevices()
+    if(settings.devices) {
+    	settings.devices.each { device ->
+    	def item = device.tokenize('|')
+        def deviceId = item[0]
+        def deviceName = item[1]
+        def existingDevices = children.find{ d -> d.deviceNetworkId.contains(deviceId) } 
+    		if(!existingDevices) {
+				try {
+					createChildDevice("Garadget", deviceId + ":" + state.garadgetAccessToken, "${deviceName}", deviceName)
+				} catch (Exception e) {
+					log.error "Error creating device: ${e}"
+				}
+    		}
+		}	
+    }
+
+     
+	// Do the initial poll
+	poll()
+	// Schedule it to run every 5 minutes
+	runEvery5Minutes("poll")
+}
+
+def getToken(garadgetUsername, garadgetPassword){
+	log.debug "Executing 'sendCommand.setState'"
+    def body = ("grant_type=password&username=${garadgetUsername}&password=${garadgetPassword}&expires_in=0")
+	sendCommand("createToken","particle","particle", body)
+}
+
+private sendCommand(method, user, pass, command) {
+    def userpassascii = "${user}:${pass}"
+	def userpass = "Basic " + userpassascii.encodeAsBase64().toString()
+    def headers = [:]
+    headers.put("Authorization", userpass)
+	def methods = [
+			'createToken': [
+        				uri: getVendorTokenPath(),
+            			requestContentType: "application/x-www-form-urlencoded", 
+                        headers: headers,
+                	    body: command
+                    	],
+            'deleteToken': [
+        				uri: apiUrl() + "/v1/access_tokens/${state.garadgetAccessToken}",
+            			requestContentType: "application/x-www-form-urlencoded", 
+                        headers: headers,
+                    	]
+                   ]
+	def request = methods.getAt(method)
+	log.debug "Http Params ("+request+")"
+		
+    try{
+        if (method == "createToken"){
+        	log.debug "Executing createToken 'sendCommand'" 
+            httpPost(request) { resp ->            
+                parseResponse(resp)
+            }
+        }else if (method == "deleteToken"){
+        	log.debug "Executing deleteToken 'sendCommand'" 
+            httpDelete(request) { resp ->            
+                parseResponse(resp)
+            }
+        }else{
+        log.debug "Executing default HttpGet 'sendCommand'"       
+            httpGet(request) { resp ->            
+                parseResponse(resp)
+        }
+        }
+    } catch(Exception e){
+        log.debug("___exception: " + e)
+    }
+}
+
+
+private parseResponse(resp) {
+    log.debug("Executing parseResponse: "+resp.data)
+    log.debug("Output status: "+resp.status)
+    if(resp.status == 200) {
+    	log.debug("Executing parseResponse.successTrue")
+        state.garadgetAccessToken = resp.data.access_token 
+        log.debug("Access Token: "+ state.garadgetAccessToken)
+		state.garadgetRefreshToken = resp.data.refresh_token
+        log.debug("Refresh Token: "+ state.garadgetRefreshToken)
+		state.garadgetTokenExpires = resp.data.expires_in
+        log.debug("Token Expires: "+ state.garadgetTokenExpires)
+        log.debug "Created new Garadget token"  
+    }else if(resp.status == 201){
+        log.debug("Something was created/updated")
+    }
+}
+
+def poll() {
+	log.debug "In Poll"
+	getDeviceList();
+	getAllChildDevices().each { 
+        it.statusCommand()
+	}
+}
+
+private Boolean canInstallLabs() {
+	return hasAllHubsOver("000.011.00603")
+}
+
+private List getRealHubFirmwareVersions() {
+	return location.hubs*.firmwareVersionString.findAll { it }
+}
+
+private Boolean hasAllHubsOver(String desiredFirmware) {
+	return realHubFirmwareVersions.every { fw -> fw >= desiredFirmware }
+}
+
+void deleteToken() {
+try{
+    sendCommand("deleteToken","${garadgetUsername}","${garadgetPassword}",[])
+	log.debug "Deleted the existing Garadget Access Token"
+ } catch (e) {log.debug "Couldn't delete Garadget Token, There was an error (${e}), moving on"}
+}
+
+private removeChildDevices(delete) {
+	try {
+    	delete.each {
+        	deleteChildDevice(it.deviceNetworkId)
+            log.info "Successfully Removed Child Device: ${it.displayName} (${it.deviceNetworkId})"
+    		}
+   		}
+    catch (e) { log.error "There was an error (${e}) when trying to delete the child device" }
+}