MSA-971: Added Device Handler for Fibaro Wall Plug ZW5

Rolling down changes in staging to master

devicetypes/fibargroup/fibaro-wall-plug-zw5.src/fibaro-wall-plug-zw5.groovy

@@ -0,0 +1,254 @@
+/**
+ *  Fibaro Wall Plug ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Wall Plug ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Actuator"
+		capability "Configuration"
+		capability "Energy Meter"
+		capability "Power Meter"
+		capability "Refresh"
+		capability "Sensor"
+		capability "Switch"
+
+		command "reset"
+        
+        fingerprint deviceId: "0x1001", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x32, 0x8E, 0x71, 0x73, 0x98, 0x31, 0x25, 0x86", outClusters: ""
+	}
+
+	simulator {
+		
+	}
+
+	tiles(scale: 2) {
+    	multiAttributeTile(name:"FGWP", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.switch", key:"PRIMARY_CONTROL") {
+            	attributeState("on", label: '${name}', action: "switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821")
+            	attributeState("off", label: '${name}', action: "switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff")   
+            }
+            
+            tileAttribute("device.power", key:"SECONDARY_CONTROL") {
+				attributeState("default", label:'${currentValue} W', backgroundColor:"#ffffff")
+			}
+        }
+        
+		valueTile("energy", "device.energy", width: 2, height: 2) {
+			state "default", label:'${currentValue} kWh'
+		}
+		standardTile("reset", "device.energy", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:'reset kWh', action:"reset"
+		}
+		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+                
+        main "FGWP"
+        details(["FGWP", "energy", "reset", "refresh"])
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+
+	if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGK failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+    	def cmd = zwave.parse(description, [0x25: 1, 0x31: 5, 0x32: 1, 0x5A: 1, 0x71: 3, 0x72: 2, 0x86: 1])
+    
+    	if (cmd) {
+    		log.debug "Parsed '${cmd}'"
+        	zwaveEvent(cmd)
+    	}
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x25: 1, 0x5A: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x31: 5, 0x32: 1, 0x71: 3, 0x72: 2, 0x86: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.meterv1.MeterReport cmd) {
+	if (cmd.scale == 0) {
+		createEvent(name: "energy", value: cmd.scaledMeterValue, unit: "kWh")
+	} else if (cmd.scale == 2) {
+		createEvent(name: "power", value: Math.round(cmd.scaledMeterValue), unit: "W")
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def map = [ displayed: true ]
+    if (cmd.sensorType == 4) {
+    	createEvent(name: "power", value: Math.round(cmd.scaledSensorValue), unit: "W")
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd)
+{
+	if (cmd.notificationType == 0x08) {
+    	if (cmd.event == 0x06) {
+        	createEvent(descriptionText: "Warning: $device.displayName detected over-current", isStateChange: true)	
+        } else if (cmd.event == 0x08) {
+        	createEvent(descriptionText: "Warning: $device.displayName detected over-load", isStateChange: true)
+        }
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "$device.displayName: Unhandled: $cmd"
+	[:]
+}
+
+// handle commands
+def configure() {
+	log.debug "Executing 'configure'"
+	
+    def cmds = []
+
+    cmds += zwave.manufacturerSpecificV1.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId])
+    cmds += zwave.meterV2.meterGet(scale:0)
+    cmds += zwave.meterV2.meterGet(scale:2)
+    cmds += zwave.switchBinaryV1.switchBinaryGet()
+    
+    encapSequence(cmds, 500)
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+	
+    def cmds = []
+    cmds += zwave.meterV2.meterGet(scale:0)
+    cmds += zwave.meterV2.meterGet(scale:2)
+    cmds += zwave.switchBinaryV1.switchBinaryGet()
+    
+    encapSequence(cmds, 500)
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	encap(zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF))
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	encap(zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00))
+}
+
+def reset() {
+	log.debug "Executing 'reset'"
+    encap(zwave.meterV2.meterReset())
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16encapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+	def secureClasses = [0x25, 0x5A, 0x70, 0x85, 0x8E]
+
+	//todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

smartapps/smartthings/speaker-notify-with-sound.src/speaker-notify-with-sound.groovy

@@ -76,7 +76,7 @@ def mainPage() {
 		}
 		section{
 			input "actionType", "enum", title: "Action?", required: true, defaultValue: "Bell 1", options: [
-				//"Custom Message",
+				"Custom Message",
 				"Bell 1",
 				"Bell 2",
 				"Dogs Barking",
@@ -89,7 +89,7 @@ def mainPage() {
 				"Someone is arriving",
 				"Piano",
 				"Lightsaber"]
-			//input "message","text",title:"Play this message", required:false, multiple: false
+			input "message","text",title:"Play this message", required:false, multiple: false
 		}
 		section {
 			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
@@ -408,13 +408,15 @@ private loadText() {
 		case "Lightsaber":
 			state.sound = [uri: "http://s3.amazonaws.com/smartapp-media/sonos/lightsaber.mp3", duration: "10"]
 			break;
-		default:
-			/*if (message) {
+		case "Custom Message":
+			if (message) {
 				state.sound = textToSpeech(message instanceof List ? message[0] : message) // not sure why this is (sometimes) needed)
 			}
 			else {
 				state.sound = textToSpeech("You selected the custom message option but did not enter a message in the $app.label Smart App")
-			}*/
+			}
+			break;
+		default:
 			state.sound = [uri: "http://s3.amazonaws.com/smartapp-media/sonos/bell1.mp3", duration: "10"]
 			break;
 	}