MSA-994: 테스트

Update vacation-lighting-director.groovy

devicetypes/-/-.src/-.groovy

@@ -0,0 +1,56 @@
+/**
+ *  가상알림알림
+ *
+ *  Copyright 2016 박혜진
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "가상알림알림", namespace: "가상알림알림", author: "박혜진") {
+		capability "Alarm"
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		// TODO: define your main and details tiles here
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+	// TODO: handle 'alarm' attribute
+
+}
+
+// handle commands
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def strobe() {
+	log.debug "Executing 'strobe'"
+	// TODO: handle 'strobe' command
+}
+
+def siren() {
+	log.debug "Executing 'siren'"
+	// TODO: handle 'siren' command
+}
+
+def both() {
+	log.debug "Executing 'both'"
+	// TODO: handle 'both' command
+}

devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy

@@ -18,10 +18,9 @@ metadata {
         capability "Sensor"
         capability "Smoke Detector" //attributes: smoke ("detected","clear","tested")
         capability "Temperature Measurement" //attributes: temperature
-        attribute "tamper", "enum", ["active", "inactive"]//capability "Tamper Alert"// <- yields "java.lang.RuntimeException: Metadata Error: Capability 'Tamper Alert' not found" error
-        attribute "heatAlarm", "enum", ["overheat", "inactive"]
+        attribute "tamper", "enum", ["detected", "clear"]
+        attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
-        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A"
     }
     simulator {
         //battery
@@ -51,7 +50,7 @@ metadata {
         input description: "Please consult Fibaro Smoke Sensor operating manual for advanced setting options. You can skip this configuration to use default settings",
                 title: "Advanced Configuration", displayDuringSetup: true, type: "paragraph", element: "paragraph"
         input "smokeSensorSensitivity", "enum", title: "Smoke Sensor Sensitivity", options: ["High","Medium","Low"], defaultValue: "${smokeSensorSensitivity}", displayDuringSetup: true
-        input "zwaveNotificationStatus", "enum", title: "Notifications Status", options: ["disabled","casing opened","exceeding temperature threshold","all notifications"],
+        input "zwaveNotificationStatus", "enum", title: "Notifications Status", options: ["disabled","casing opened","exceeding temperature threshold", "lack of Z-Wave range", "all notifications"],
                 defaultValue: "${zwaveNotificationStatus}", displayDuringSetup: true
         input "visualIndicatorNotificationStatus", "enum", title: "Visual Indicator Notifications Status",
                 options: ["disabled","casing opened","exceeding temperature threshold", "lack of Z-Wave range", "all notifications"],
@@ -62,47 +61,44 @@ metadata {
         input "temperatureReportInterval", "enum", title: "Temperature Report Interval",
                 options: ["reports inactive", "5 minutes", "15 minutes", "30 minutes", "1 hour", "6 hours", "12 hours", "18 hours", "24 hours"], defaultValue: "${temperatureReportInterval}", displayDuringSetup: true
         input "temperatureReportHysteresis", "number", title: "Temperature Report Hysteresis", description: "Available settings: 1-100 C", range: "1..100", displayDuringSetup: true
-        input "temperatureThreshold", "number", title: "Overheat Temperature Threshold", description: "Available settings: 1-100 C", range: "1..100", displayDuringSetup: true
+        input "temperatureThreshold", "number", title: "Overheat Temperature Threshold", description: "Available settings: 0 or 2-100 C", range: "0..100", displayDuringSetup: true
         input "excessTemperatureSignalingInterval", "enum", title: "Excess Temperature Signaling Interval",
                 options: ["5 minutes", "15 minutes", "30 minutes", "1 hour", "6 hours", "12 hours", "18 hours", "24 hours"], defaultValue: "${excessTemperatureSignalingInterval}", displayDuringSetup: true
         input "lackOfZwaveRangeIndicationInterval", "enum", title: "Lack of Z-Wave Range Indication Interval",
                 options: ["5 minutes", "15 minutes", "30 minutes", "1 hour", "6 hours", "12 hours", "18 hours", "24 hours"], defaultValue: "${lackOfZwaveRangeIndicationInterval}", displayDuringSetup: true
     }
     tiles (scale: 2){
-        multiAttributeTile(name:"FGSD", type: "lighting", width: 6, height: 4){
+        multiAttributeTile(name:"smoke", type: "lighting", width: 6, height: 4){
             tileAttribute ("device.smoke", key: "PRIMARY_CONTROL") {
                 attributeState("clear", label:"CLEAR", icon:"st.alarm.smoke.clear", backgroundColor:"#ffffff")
                 attributeState("detected", label:"SMOKE", icon:"st.alarm.smoke.smoke", backgroundColor:"#e86d13")
                 attributeState("tested", label:"TEST", icon:"st.alarm.smoke.test", backgroundColor:"#e86d13")
+                attributeState("replacement required", label:"REPLACE", icon:"st.alarm.smoke.test", backgroundColor:"#FFFF66")
                 attributeState("unknown", label:"UNKNOWN", icon:"st.alarm.smoke.test", backgroundColor:"#ffffff")
             }
-            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
-			}  
+            tileAttribute ("device.battery", key: "SECONDARY_CONTROL") {
+                attributeState "battery", label:'Battery: ${currentValue}%', unit:"%"
+            }
         }
         valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "battery", label:'${currentValue}% battery', unit:"%"
         }
-        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
-			backgroundColors:[
-				[value: 31, color: "#153591"],
-				[value: 44, color: "#1e9cbb"],
-				[value: 59, color: "#90d2a7"],
-				[value: 74, color: "#44b621"],
-				[value: 84, color: "#f1d801"],
-				[value: 95, color: "#d04e00"],
-				[value: 96, color: "#bc2323"]
-			]
-		}
-        valueTile("heatAlarm", "device.heatAlarm", inactiveLabel: false, width: 2, height: 2) {
-            state "inactive", label:'TEMPERATURE OK', backgroundColor:"#ffffff"
-            state "overheat", label:'OVERHEAT DETECTED', backgroundColor:"#bc2323"
+        valueTile("temperature", "device.temperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "temperature", label:'${currentValue}°', unit:"C"
+        }
+        valueTile("heatAlarm", "device.heatAlarm", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "clear", label:'TEMPERATURE OK', backgroundColor:"#ffffff"
+            state "overheat detected", label:'OVERHEAT DETECTED', backgroundColor:"#ffffff"
+            state "rapid temperature rise", label:'RAPID TEMP RISE', backgroundColor:"#ffffff"
+            state "underheat detected", label:'UNDERHEAT DETECTED', backgroundColor:"#ffffff"
+        }
+        valueTile("tamper", "device.tamper", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "clear", label:'NO TAMPER', backgroundColor:"#ffffff"
+            state "detected", label:'TAMPER DETECTED', backgroundColor:"#ffffff"
         }
 
-        main "FGSD"
-        details(["FGSD","temperature", "battery", "heatAlarm"])
+        main "smoke"
+        details(["smoke","temperature"])
     }
 }
 
@@ -121,7 +117,7 @@ def parse(String description) {
                         "If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
     } else if (description != "updated") {
         log.debug "parse() >> zwave.parse(description)"
-        def cmd = zwave.parse(description, [0x31: 5, 0x5A: 1, 0x71: 3, 0x72: 2, 0x84: 1, 0x86: 1, 0x8B: 1, 0x9C: 1])
+        def cmd = zwave.parse(description, [0x31: 5, 0x71: 3, 0x84: 1])
         if (cmd) {
             result = zwaveEvent(cmd)
         }
@@ -130,41 +126,15 @@ def parse(String description) {
     return result
 }
 
-//security
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-    setSecured()
-    def encapsulatedCommand = cmd.encapsulatedCommand([0x31: 5, 0x5A: 1, 0x71: 3, 0x84: 1, 0x9C: 1])
-    if (encapsulatedCommand) {
-        log.debug "command: 98 (Security) 81(SecurityMessageEncapsulation) encapsulatedCommand:  $encapsulatedCommand"
-        zwaveEvent(encapsulatedCommand)
-    } else {
-        log.warn "Unable to extract encapsulated cmd from $cmd"
-        createEvent(descriptionText: cmd.toString())
-    }
-}
-
-//crc16
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
-{
-    def versions = [0x31: 5, 0x72: 2, 0x86: 1, 0x8B: 1]
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (!encapsulatedCommand) {
-		log.debug "Could not extract command from $cmd"
-	} else {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
 def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
     log.info "Executing zwaveEvent 86 (VersionV1): 12 (VersionReport) with cmd: $cmd"
-    def version = "${cmd.applicationVersion}.${cmd.applicationSubVersion}"
-    updateDataValue("version", fw)
-    def text = "$device.displayName: firmware version: $version, Z-Wave version: ${cmd.zWaveProtocolVersion}.${cmd.zWaveProtocolSubVersion}"
+    def fw = "${cmd.applicationVersion}.${cmd.applicationSubVersion}"
+    updateDataValue("fw", fw)
+    def text = "$device.displayName: firmware version: $fw, Z-Wave version: ${cmd.zWaveProtocolVersion}.${cmd.zWaveProtocolSubVersion}"
     createEvent(descriptionText: text, isStateChange: false)
 }
 
+
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
     def map = [ name: "battery", unit: "%" ]
     if (cmd.batteryLevel == 0xFF) {
@@ -191,6 +161,18 @@ def zwaveEvent(physicalgraph.zwave.commands.applicationstatusv1.ApplicationRejec
     createEvent(displayed: true, descriptionText: "$device.displayName rejected the last request")
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+    setSecured()
+    def encapsulatedCommand = cmd.encapsulatedCommand([0x31: 5, 0x71: 3, 0x84: 1])
+    if (encapsulatedCommand) {
+        log.debug "command: 98 (Security) 81(SecurityMessageEncapsulation) encapsulatedCommand:  $encapsulatedCommand"
+        zwaveEvent(encapsulatedCommand)
+    } else {
+        log.warn "Unable to extract encapsulated cmd from $cmd"
+        createEvent(descriptionText: cmd.toString())
+    }
+}
+
 def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupportedReport cmd) {
     log.info "Executing zwaveEvent 98 (SecurityV1): 03 (SecurityCommandsSupportedReport) with cmd: $cmd"
     setSecured()
@@ -217,31 +199,18 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
     if (cmd.notificationType == 7) {
         switch (cmd.event) {
             case 0:
-                result << createEvent(name: "tamper", value: "inactive", displayed: false)
+                result << createEvent(name: "tamper", value: "clear", displayed: false)
                 break
             case 3:
-                result << createEvent(name: "tamper", value: "active", descriptionText: "$device.displayName casing was opened")
+                result << createEvent(name: "tamper", value: "detected", descriptionText: "$device.displayName casing was opened")
                 break
         }
     } else if (cmd.notificationType == 1) { //Smoke Alarm (V2)
         log.debug "notificationv3.NotificationReport: for Smoke Alarm (V2)"
         result << smokeAlarmEvent(cmd.event)
-    } else if (cmd.notificationType == 4) { // Heat Alarm (V2)
+    }  else if (cmd.notificationType == 4) { // Heat Alarm (V2)
         log.debug "notificationv3.NotificationReport: for Heat Alarm (V2)"
         result << heatAlarmEvent(cmd.event)
-    } else if (cmd.notificationType == 8) {  
-    	if (cmd.event == 0x0A) {
-            def map = [:]
-            map.name = "battery"
-            map.value = 1
-            map.unit = "%"
-            map.displayed = true
-            result << createEvent(map)
-        }
-    } else if (cmd.notificationType == 9) {
-    	if (cmd.event == 0x01) {
-        	result << createEvent(descriptionText: "Warning: $device.displayName system hardware failure", isStateChange: true)	
-        }
     } else {
         log.warn "Need to handle this cmd.notificationType: ${cmd.notificationType}"
         result << createEvent(descriptionText: cmd.toString(), isStateChange: false)
@@ -252,7 +221,7 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 def smokeAlarmEvent(value) {
     log.debug "smokeAlarmEvent(value): $value"
     def map = [name: "smoke"]
-    if (value == 2) {
+    if (value == 1 || value == 2) {
         map.value = "detected"
         map.descriptionText = "$device.displayName detected smoke"
     } else if (value == 0) {
@@ -261,6 +230,9 @@ def smokeAlarmEvent(value) {
     } else if (value == 3) {
         map.value = "tested"
         map.descriptionText = "$device.displayName smoke alarm test"
+    } else if (value == 4) {
+        map.value = "replacement required"
+        map.descriptionText = "$device.displayName replacement required"
     } else {
         map.value = "unknown"
         map.descriptionText = "$device.displayName unknown event"
@@ -271,12 +243,18 @@ def smokeAlarmEvent(value) {
 def heatAlarmEvent(value) {
     log.debug "heatAlarmEvent(value): $value"
     def map = [name: "heatAlarm"]
-    if (value == 2) {
-        map.value = "overheat"
+    if (value == 1 || value == 2) {
+        map.value = "overheat detected"
         map.descriptionText = "$device.displayName overheat detected"
     } else if (value == 0) {
-        map.value = "inactive"
+        map.value = "clear"
         map.descriptionText = "$device.displayName heat alarm cleared (no overheat)"
+    } else if (value == 3 || value == 4) {
+        map.value = "rapid temperature rise"
+        map.descriptionText = "$device.displayName rapid temperature rise"
+    } else if (value == 5 || value == 6) {
+        map.value = "underheat detected"
+        map.descriptionText = "$device.displayName underheat detected"
     } else {
         map.value = "unknown"
         map.descriptionText = "$device.displayName unknown event"
@@ -296,14 +274,12 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
         //Only ask for battery if we haven't had a BatteryReport in a while
         if (!state.lastbatt || (new Date().time) - state.lastbatt > 24*60*60*1000) {
             log.debug("Device has been configured sending >> batteryGet()")
-            cmds << zwave.batteryV1.batteryGet()
+            cmds << zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format()
+            cmds << "delay 1200"
         }
-        cmds << zwave.sensorAlarmV1.sensorAlarmGet(sensorType: 0)
-        cmds << zwave.sensorAlarmV1.sensorAlarmGet(sensorType: 1)
-        cmds << zwave.sensorAlarmV1.sensorAlarmGet(sensorType: 4)
         log.debug("Device has been configured sending >> wakeUpNoMoreInformation()")
-        cmds << zwave.wakeUpV1.wakeUpNoMoreInformation()
-        result << response(commands(cmds,500)) //tell device back to sleep
+        cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+        result << response(cmds) //tell device back to sleep
     }
     result
 }
@@ -341,26 +317,8 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
     log.debug "After device is securely joined, send commands to update tiles"
     result << zwave.batteryV1.batteryGet()
     result << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x01)
-    //always send wakeUpNoMoreInformation as secure (at this point "secured" property is not set)
-    [[descriptionText:"${device.displayName} MSR report"], response(commands(result, 500) << "delay 1000" << secure(zwave.wakeUpV1.wakeUpNoMoreInformation()))]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
-	log.debug "deviceIdData:                ${cmd.deviceIdData}"
-    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
-    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
-    log.debug "deviceIdType:                ${cmd.deviceIdType}"
-    
-    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
-		String serialNumber = "h'"
-        
-        cmd.deviceIdData.each{ data ->
-        	serialNumber += "${String.format("%02X", data)}"
-        }
-        
-        updateDataValue("serialNumber", serialNumber)
-        log.debug "${device.displayName} - serial number: ${serialNumber}"
-    }
+    result << zwave.wakeUpV1.wakeUpNoMoreInformation()
+    [[descriptionText:"${device.displayName} MSR report"], response(commands(result, 5000))]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.associationv2.AssociationReport cmd) {
@@ -374,37 +332,6 @@ def zwaveEvent(physicalgraph.zwave.commands.associationv2.AssociationReport cmd)
     result
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
-	def map = [:]
-	switch (cmd.sensorType) {
-    	case 0:
-        	map.name = "tamper"
-            map.value = cmd.sensorState == 0xFF ? "active" : "inactive"
-            map.descriptionText = cmd.sensorState == 0xFF ? "$device.displayName casing was opened" : ""
-        	break
-        case 1:
-        	map.name = "smoke"
-            map.value = cmd.sensorState == 0xFF ? "detected" : "clear"
-            map.descriptionText = cmd.sensorState == 0xFF ? "$device.displayName detected smoke" : "$device.displayName is clear (no smoke)"
-        	break
-        case 4:
-        	map.name = "heatAlarm"
-        	map.value = cmd.sensorState == 0xFF ? "overheat" : "inactive"
-            map.descriptionText = cmd.sensorState == 0xFF ? "$device.displayName overheat detected" : "$device.displayName heat alarm cleared (no overheat)"
-        	break
-    }
-    
-    createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.timeparametersv1.TimeParametersGet cmd) {
-	log.info "Executing zwaveEvent 8B (TimeParametersV1) : 02 (TimeParametersGet) with cmd: $cmd"
-	def nowCal = Calendar.getInstance(TimeZone.getTimeZone("UTC"))
-    //Time Parameters are requested by an un-encapsulated frame
-	response(zwave.timeParametersV1.timeParametersReport(year: nowCal.get(Calendar.YEAR), month: (nowCal.get(Calendar.MONTH) + 1), day: nowCal.get(Calendar.DAY_OF_MONTH), 
-    	hourUtc: nowCal.get(Calendar.HOUR_OF_DAY), minuteUtc: nowCal.get(Calendar.MINUTE), secondUtc: nowCal.get(Calendar.SECOND)).format())
-}
-
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
     log.warn "General zwaveEvent cmd: ${cmd}"
     createEvent(descriptionText: cmd.toString(), isStateChange: false)
@@ -433,7 +360,7 @@ def configure() {
         }
         //3. Z-Wave notification status: 0-all disabled (default), 1-casing open enabled, 2-exceeding temp enable
         if (zwaveNotificationStatus && zwaveNotificationStatus != "null"){
-            request += zwave.configurationV1.configurationSet(parameterNumber: 2, size: 1, scaledConfigurationValue: zwaveNotificationOptionValueMap[zwaveNotificationStatus] ?: 0)
+            request += zwave.configurationV1.configurationSet(parameterNumber: 2, size: 1, scaledConfigurationValue: notificationOptionValueMap[zwaveNotificationStatus] ?: 0)
         }
         //4. Visual indicator notification status: 0-all disabled (default), 1-casing open enabled, 2-exceeding temp enable, 4-lack of range notification
         if (visualIndicatorNotificationStatus && visualIndicatorNotificationStatus != "null") {
@@ -475,16 +402,7 @@ def configure() {
         //12. get temperature reading from device
         request += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x01)
 
-		//13. set association group
-		request += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId])
-
-		//14. get version
-        request += zwave.versionV1.versionGet()
-
-		//15. get serial number
-        request += zwave.manufacturerSpecificV2.deviceSpecificGet()
-        
-        commands(request) + ["delay 1000", command(zwave.wakeUpV1.wakeUpNoMoreInformation())]
+        commands(request) + ["delay 10000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
     }
 }
 
@@ -500,42 +418,24 @@ private def getTimeOptionValueMap() { [
         "reports inactive" : 0,
 ]}
 
-private def getZwaveNotificationOptionValueMap() { [
-	"disabled" : 0,
-    "casing opened" : 1,
-    "exceeding temperature threshold" : 2,
-    "all notifications" : 3	
-]}
-
 private def getNotificationOptionValueMap() { [
-    "disabled" : 0,
-    "casing opened" : 1,
-    "exceeding temperature threshold" : 2,
-    "lack of Z-Wave range" : 4,
-    "all notifications" : 7
+        "disabled" : 0,
+        "casing opened" : 1,
+        "exceeding temperature threshold" : 2,
+        "lack of Z-Wave range" : 4,
+        "all notifications" : 7,
 ]}
 
 private command(physicalgraph.zwave.Command cmd) {
-    def secureClasses = [0x20, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
-    
-    if (isSecured() && secureClasses.find{ it == cmd.commandClassId }) {
+    if (isSecured()) {
         log.info "Sending secured command: ${cmd}"
-        secure(cmd)
+        zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
     } else {
         log.info "Sending unsecured command: ${cmd}"
-        crc16(cmd)
+        cmd.format()
     }
 }
 
-private secure(physicalgraph.zwave.Command cmd) {
-	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-}
-
-private crc16(physicalgraph.zwave.Command cmd) {
-	//zwave.crc16encapV1.crc16Encap().encapsulate(cmd).format()
-    "5601${cmd.format()}0000"
-}
-
 private commands(commands, delay=200) {
     log.info "inside commands: ${commands}"
     delayBetween(commands.collect{ command(it) }, delay)
@@ -552,4 +452,4 @@ private setSecured() {
 }
 private isSecured() {
     getDataValue("secured") == "true"
-}
+}

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -17,16 +17,13 @@ metadata {
 
 	tiles(scale: 2) {
      	multiAttributeTile(name:"rich-control"){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+			tileAttribute ("", key: "PRIMARY_CONTROL") {
 	            attributeState "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#F3C200"
-			}    
+			}
 	        tileAttribute ("serialNumber", key: "SECONDARY_CONTROL") {
 	            attributeState "default", label:'SN: ${currentValue}'
-			}    
-        }    
-		standardTile("icon", "icon", width: 1, height: 1, canChangeIcon: false, inactiveLabel: true, canChangeBackground: false) {
-			state "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#FFFFFF"
-		}
+			}
+        }
 		valueTile("serialNumber", "device.serialNumber", decoration: "flat", height: 1, width: 2, inactiveLabel: false) {
 			state "default", label:'SN: ${currentValue}'
 		}
@@ -34,7 +31,7 @@ metadata {
 			state "default", label:'${currentValue}', height: 1, width: 2, inactiveLabel: false
 		}
 
-		main (["icon"])
+		main (["rich-control"])
 		details(["rich-control", "networkAddress"])
 	}
 }
@@ -75,6 +72,7 @@ def parse(description) {
 				}
 				else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
+                    parent.hubVerification(device.hub.id, msg.body)
 				}
 			}
 		}

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -57,7 +57,7 @@ def parse(String description) {
 	return result
 }
 
-def sensorValueEvent(Short value) {
+def sensorValueEvent(value) {
 	if (value) {
 		createEvent(name: "motion", value: "active", descriptionText: "$device.displayName detected motion")
 	} else {
@@ -94,24 +94,24 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 {
 	def result = []
 	if (cmd.notificationType == 0x07) {
-		if (cmd.event == 0x01 || cmd.event == 0x02) {
+		if (cmd.v1AlarmType == 0x07) {  // special case for nonstandard messages from Monoprice ensors
+			result << sensorValueEvent(cmd.v1AlarmLevel)
+		} else if (cmd.event == 0x01 || cmd.event == 0x02 || cmd.event == 0x07 || cmd.event == 0x08) {
 			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x00) {
+			result << sensorValueEvent(0)
 		} else if (cmd.event == 0x03) {
-			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId))
-			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+			result << createEvent(name: "tamper", value: "detected", descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			result << response(zwave.batteryV1.batteryGet())
 		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
 			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
-		} else if (cmd.event == 0x07) {
-			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-			result << sensorValueEvent(1)
 		}
 	} else if (cmd.notificationType) {
 		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
-		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
+		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, isStateChange: true, displayed: false)
 	} else {
 		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
-		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, isStateChange: true, displayed: false)
 	}
 	result
 }

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -61,37 +61,44 @@ def parse(String description) {
 			zwaveEvent(cmd, results)
 		}
 	}
-	// log.debug "\"$description\" parsed to ${results.inspect()}"
+	log.debug "'$description' parsed to ${results.inspect()}"
 	return results
 }
 
 
 def createSmokeOrCOEvents(name, results) {
 	def text = null
-	if (name == "smoke") {
-		text = "$device.displayName smoke was detected!"
-		// these are displayed:false because the composite event is the one we want to see in the app
-		results << createEvent(name: "smoke",          value: "detected", descriptionText: text, displayed: false)
-	} else if (name == "carbonMonoxide") {
-		text = "$device.displayName carbon monoxide was detected!"
-		results << createEvent(name: "carbonMonoxide", value: "detected", descriptionText: text, displayed: false)
-	} else if (name == "tested") {
-		text = "$device.displayName was tested"
-		results << createEvent(name: "smoke",          value: "tested", descriptionText: text, displayed: false)
-		results << createEvent(name: "carbonMonoxide", value: "tested", descriptionText: text, displayed: false)
-	} else if (name == "smokeClear") {
-		text = "$device.displayName smoke is clear"
-		results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
-		name = "clear"
-	} else if (name == "carbonMonoxideClear") {
-		text = "$device.displayName carbon monoxide is clear"
-		results << createEvent(name: "carbonMonoxide", value: "clear", descriptionText: text, displayed: false)
-		name = "clear"
-	} else if (name == "testClear") {
-		text = "$device.displayName smoke is clear"
-		results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
-		results << createEvent(name: "carbonMonoxide", value: "clear", displayed: false)
-		name = "clear"
+	switch (name) {
+		case "smoke":
+			text = "$device.displayName smoke was detected!"
+			// these are displayed:false because the composite event is the one we want to see in the app
+			results << createEvent(name: "smoke",          value: "detected", descriptionText: text, displayed: false)
+			break
+		case "carbonMonoxide":
+			text = "$device.displayName carbon monoxide was detected!"
+			results << createEvent(name: "carbonMonoxide", value: "detected", descriptionText: text, displayed: false)
+			break
+		case "tested":
+			text = "$device.displayName was tested"
+			results << createEvent(name: "smoke",          value: "tested", descriptionText: text, displayed: false)
+			results << createEvent(name: "carbonMonoxide", value: "tested", descriptionText: text, displayed: false)
+			break
+		case "smokeClear":
+			text = "$device.displayName smoke is clear"
+			results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
+			name = "clear"
+			break
+		case "carbonMonoxideClear":
+			text = "$device.displayName carbon monoxide is clear"
+			results << createEvent(name: "carbonMonoxide", value: "clear", descriptionText: text, displayed: false)
+			name = "clear"
+			break
+		case "testClear":
+			text = "$device.displayName test cleared"
+			results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
+			results << createEvent(name: "carbonMonoxide", value: "clear", displayed: false)
+			name = "clear"
+			break
 	}
 	// This composite event is used for updating the tile
 	results << createEvent(name: "alarmState", value: name, descriptionText: text)
@@ -117,8 +124,10 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd, results) {
 			createSmokeOrCOEvents(cmd.alarmLevel ? "tested" : "testClear", results)
 			break
 		case 13:  // sent every hour -- not sure what this means, just a wake up notification?
-			if (cmd.alarmLevel != 255) {
-				results << createEvent(descriptionText: "$device.displayName code 13 is $cmd.alarmLevel", displayed: true)
+			if (cmd.alarmLevel == 255) {
+				results << createEvent(descriptionText: "$device.displayName checked in", isStateChange: false)
+			} else {
+				results << createEvent(descriptionText: "$device.displayName code 13 is $cmd.alarmLevel", isStateChange:true, displayed:false)
 			}
 			
 			// Clear smoke in case they pulled batteries and we missed the clear msg
@@ -127,9 +136,8 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd, results) {
 			}
 			
 			// Check battery if we don't have a recent battery event
-			def prevBattery = device.currentState("battery")
-			if (!prevBattery || (new Date().time - prevBattery.date.time)/60000 >= 60 * 53) {
-				results << new physicalgraph.device.HubAction(zwave.batteryV1.batteryGet().format())
+			if (!state.lastbatt || (now() - state.lastbatt) >= 48*60*60*1000) {
+				results << response(zwave.batteryV1.batteryGet())
 			}
 			break
 		default:
@@ -158,12 +166,17 @@ def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd,
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd, results) {
-	results << new physicalgraph.device.HubAction(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
 	results << createEvent(descriptionText: "$device.displayName woke up", isStateChange: false)
+	if (!state.lastbatt || (now() - state.lastbatt) >= 56*60*60*1000) {
+		results << response(zwave.batteryV1.batteryGet(), "delay 2000", zwave.wakeUpV1.wakeUpNoMoreInformation())
+	} else {
+		results << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+	}
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd, results) {
-	def map = [ name: "battery", unit: "%" ]
+	def map = [ name: "battery", unit: "%", isStateChange: true ]
+	state.lastbatt = now()
 	if (cmd.batteryLevel == 0xFF) {
 		map.value = 1
 		map.descriptionText = "$device.displayName battery is low!"

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -68,7 +68,7 @@ def bridgeDiscovery(params=[:])
 	}
 
 	//setup.xml request every 3 seconds except on discoveries
-	if(((bridgeRefreshCount % 1) == 0) && ((bridgeRefreshCount % 5) != 0)) {
+	if(((bridgeRefreshCount % 3) == 0) && ((bridgeRefreshCount % 5) != 0)) {
 		verifyHueBridges()
 	}
 
@@ -175,6 +175,7 @@ private discoverHueBulbs() {
 }
 
 private verifyHueBridge(String deviceNetworkId, String host) {
+	log.trace "Verify Hue Bridge $deviceNetworkId"
 	sendHubCommand(new physicalgraph.device.HubAction([
 		method: "GET",
 		path: "/description.xml",
@@ -602,6 +603,20 @@ def parse(childDevice, description) {
 	}
 }
 
+def hubVerification(bodytext) {
+	log.trace "Bridge sent back description.xml for verification"
+    def body = new XmlSlurper().parseText(bodytext)
+    if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
+        def bridges = getHueBridges()
+        def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
+        if (bridge) {
+            bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
+        } else {
+            log.error "/description.xml returned a bridge that didn't exist"
+        }
+    }
+}
+
 def on(childDevice) {
 	log.debug "Executing 'on'"
 	put("lights/${getId(childDevice)}/state", [on: true])

smartapps/smartthings/notify-me-when.src/notify-me-when.groovy

@@ -155,4 +155,4 @@ private getIncludeArticle() {
 	def name = location.name.toLowerCase()
 	def segs = name.split(" ")
 	!(["work","home"].contains(name) || (segs.size() > 1 && (["the","my","a","an"].contains(segs[0]) || segs[0].endsWith("'s"))))
-}
+}

smartapps/tslagle13/vacation-lighting-director.src/vacation-lighting-director.groovy

@@ -1,11 +1,17 @@
 /**
  *  Vacation Lighting Director
  * 
- *  Version  2.4 - Added information paragraphs
+ * Version  2.5 - Moved scheduling over to Cron and added time as a trigger. 
+ *				  Cleaned up formatting and some typos.
+ *                Updated license.
+ *                Made people option optional
+ * 				  Added sttement to unschedule on mode change if people option is not selected
+ *
+ * Version  2.4 - Added information paragraphs
  * 
  *  Source code can be found here: https://github.com/tslagle13/SmartThings/blob/master/smartapps/tslagle13/vacation-lighting-director.groovy
  *
- *  Copyright 2015 Tim Slagle
+ *  Copyright 2016 Tim Slagle
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -51,8 +57,7 @@ def pageSetup() {
 	return dynamicPage(pageProperties) {
     	section(""){
         	paragraph "This app can be used to make your home seem occupied anytime you are away from your home. " +
-			"Please use each othe the sections below to setup the different preferences to your liking. " +
-			"I recommend this app be used with at least two away modes.  An example would be 'Away Day' 'and Away Night'. " 
+			"Please use each of the the sections below to setup the different preferences to your liking. " 
         }
         section("Setup Menu") {
             href "Setup", title: "Setup", description: "", state:greyedOut()
@@ -70,7 +75,7 @@ def Setup() {
     def newMode = [
         name:       	"newMode",
         type:       	"mode",
-        title:      	"Which?",
+        title:      	"Modes",
         multiple:   	true,
         required:   	true
     ]
@@ -96,14 +101,6 @@ def Setup() {
         required:	true,
     ]
     
-    def people = [
-        name:       "people",
-        type:       "capability.presenceSensor",
-        title:      "If these people are home do not change light status",
-        required:	true,
-        multiple:	true
-    ]
-    
     def pageName = "Setup"
     
     def pageProperties = [
@@ -116,10 +113,11 @@ def Setup() {
 
 		section(""){            
                     paragraph "In this section you need to setup the deatils of how you want your lighting to be affected while " +
-                    paragraph "you are away.  All of these settings are required in order for the simulator to run correctly."
+                    "you are away.  All of these settings are required in order for the simulator to run correctly."
         }
-        section("Which mode change triggers the simulator? (This app will only run in selected mode(s))") {
-                    input newMode           
+        section("Simulator Triggers") {
+                    input newMode  
+                    href "timeIntervalInput", title: "Times", description: timeIntervalLabel(), refreshAfterSelection:true
         }
         section("Light switches to turn on/off") {
                     input switches           
@@ -130,9 +128,6 @@ def Setup() {
         section("Number of active lights at any given time") {
                     input number_of_active_lights           
         }    
-        section("People") {
-                    input people            
-        }
     }
     
 }
@@ -162,18 +157,29 @@ def Settings() {
         title:      "Settings",
         nextPage:   "pageSetup"
     ]
+    
+    def people = [
+        name:       "people",
+        type:       "capability.presenceSensor",
+        title:      "If these people are home do not change light status",
+        required:	false,
+        multiple:	true
+    ]
 
     return dynamicPage(pageProperties) {
 
 		section(""){              
                     paragraph "In this section you can restrict how your simulator runs.  For instance you can restrict on which days it will run " +
-                    paragraph "as well as a delay for the simulator to start after it is in the correct mode.  Delaying the simulator helps with false starts based on a incorrect mode change."
+                    "as well as a delay for the simulator to start after it is in the correct mode.  Delaying the simulator helps with false starts based on a incorrect mode change."
         }
         section("Delay to start simulator") {
                     input falseAlarmThreshold
         }
+        section("People") {
+        			paragraph "Not using this setting may cause some lights to remain on when you arrive home"
+                    input people            
+        }
         section("More options") {
-                    href "timeIntervalInput", title: "Only during a certain time", description: getTimeLabel(starting, ending), state: greyedOutTime(starting, ending), refreshAfterSelection:true
                     input days
         } 
     }   
@@ -181,9 +187,24 @@ def Settings() {
 
 page(name: "timeIntervalInput", title: "Only during a certain time", refreshAfterSelection:true) {
 		section {
-			input "starting", "time", title: "Starting", required: false 
-			input "ending", "time", title: "Ending", required: false 
+			input "startTimeType", "enum", title: "Starting at", options: [["time": "A specific time"], ["sunrise": "Sunrise"], ["sunset": "Sunset"]], defaultValue: "time", submitOnChange: true
+			if (startTimeType in ["sunrise","sunset"]) {
+				input "startTimeOffset", "number", title: "Offset in minutes (+/-)", range: "*..*", required: false
+			}
+			else {
+				input "starting", "time", title: "Start time", required: false
+			}
 		}
+		section {
+			input "endTimeType", "enum", title: "Ending at", options: [["time": "A specific time"], ["sunrise": "Sunrise"], ["sunset": "Sunset"]], defaultValue: "time", submitOnChange: true
+			if (endTimeType in ["sunrise","sunset"]) {
+				input "endTimeOffset", "number", title: "Offset in minutes (+/-)", range: "*..*", required: false
+			}
+			else {
+				input "ending", "time", title: "End time", required: false
+			}
+		}
+        
 }
 
 def installed() {
@@ -201,10 +222,13 @@ def initialize(){
 	if (newMode != null) {
 		subscribe(location, modeChangeHandler)
     }
+    if (starting != null) {
+    	schedule(starting, modeChangeHandler)
+    }
+    log.debug "Installed with settings: ${settings}"
 }
 
 def modeChangeHandler(evt) {
-	log.debug "Mode change to: ${evt.value}"
 		def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 2 * 60  
     	runIn(delay, scheduleCheck)
 }
@@ -212,48 +236,54 @@ def modeChangeHandler(evt) {
 
 //Main logic to pick a random set of lights from the large set of lights to turn on and then turn the rest off
 def scheduleCheck(evt) {
-if(allOk){
-log.debug("Running")
-  // turn off all the switches
-  switches.off()
-
-  // grab a random switch
-  def random = new Random()
-  def inactive_switches = switches
-  for (int i = 0 ; i < number_of_active_lights ; i++) {
-    // if there are no inactive switches to turn on then let's break
-    if (inactive_switches.size() == 0){
-      break
+    if(allOk){
+        log.debug("Running")
+        // turn off all the switches
+        switches.off()
+        
+        // grab a random switch
+        def random = new Random()
+        def inactive_switches = switches
+        for (int i = 0 ; i < number_of_active_lights ; i++) {
+            // if there are no inactive switches to turn on then let's break
+            if (inactive_switches.size() == 0){
+                break
+            }
+            
+            // grab a random switch and turn it on
+            def random_int = random.nextInt(inactive_switches.size())
+            inactive_switches[random_int].on()
+            
+            // then remove that switch from the pool off switches that can be turned on
+            inactive_switches.remove(random_int)
+        }
+        
+        // re-run again when the frequency demands it
+        schedule("0 0/${frequency_minutes} * 1/1 * ? *", scheduleCheck)
     }
-
-    // grab a random switch and turn it on
-    def random_int = random.nextInt(inactive_switches.size())
-    inactive_switches[random_int].on()
-
-    // then remove that switch from the pool off switches that can be turned on
-    inactive_switches.remove(random_int)
-  }
-
-  // re-run again when the frequency demands it
-  runIn(frequency_minutes * 60, scheduleCheck)
-}
-//Check to see if mode is ok but not time/day.  If mode is still ok, check again after frequency period.
-else if (modeOk) {
-	log.debug("mode OK.  Running again")
-	runIn(frequency_minutes * 60, scheduleCheck)
-    switches.off()
-}
-//if none is ok turn off frequency check and turn off lights.
-else if(people){
-    //don't turn off lights if anyone is home
-		if(someoneIsHome()){
-		log.debug("Stopping Check for Light")
+    //Check to see if mode is ok but not time/day.  If mode is still ok, check again after frequency period.
+    else if (modeOk) {
+        log.debug("mode OK.  Running again")
+        switches.off()
+    }
+    //if none is ok turn off frequency check and turn off lights.
+    else {
+    	if(people){
+        	//don't turn off lights if anyone is home
+        	if(someoneIsHome()){
+        	    log.debug("Stopping Check for Light")
+        	    unschedule()
+        	}
+        	else{
+        	    log.debug("Stopping Check for Light and turning off all lights")
+        	    switches.off()
+        	    unschedule()
+        	}
     	}
-        else{
-    log.debug("Stopping Check for Light and turning off all lights")
-	switches.off()
+        else if (!modeOk) {
+        	unschedule()
+        }
     }
-}
 }      
 
 
@@ -286,26 +316,6 @@ private getDaysOk() {
 	result
 }
 
-private getTimeOk() {
-	def result = true
-	if (starting && ending) {
-		def currTime = now()
-		def start = timeToday(starting).time
-		def stop = timeToday(ending).time
-		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
-	}
-    
-    else if (starting){
-    	result = currTime >= start
-    }
-    else if (ending){
-    	result = currTime <= stop
-    }
-    
-	log.trace "timeOk = $result"
-	result
-}
-
 private getHomeIsEmpty() {
   def result = true
 
@@ -330,25 +340,59 @@ private getSomeoneIsHome() {
   return result
 }
 
-
-//gets the label for time restriction. Label phrasing changes depending on if there is both start and stop times or just one start/stop time.
-def getTimeLabel(starting, ending){
-
-	def timeLabel = "Tap to set"
-	
-    if(starting && ending){
-    	timeLabel = "Between" + " " + hhmm(starting) + " "  + "and" + " " +  hhmm(ending)
-    }
-    else if (starting) {
-		timeLabel = "Start at" + " " + hhmm(starting)
-    }
-    else if(ending){
-    timeLabel = "End at" + hhmm(ending)
-    }
-	timeLabel
+private getTimeOk() {
+	def result = true
+	def start = timeWindowStart()
+	def stop = timeWindowStop()
+	if (start && stop && location.timeZone) {
+		result = timeOfDayIsBetween(start, stop, new Date(), location.timeZone)
+	}
+	log.trace "timeOk = $result"
+	result
+}
+
+private timeWindowStart() {
+	def result = null
+	if (startTimeType == "sunrise") {
+		result = location.currentState("sunriseTime")?.dateValue
+		if (result && startTimeOffset) {
+			result = new Date(result.time + Math.round(startTimeOffset * 60000))
+		}
+	}
+	else if (startTimeType == "sunset") {
+		result = location.currentState("sunsetTime")?.dateValue
+		if (result && startTimeOffset) {
+			result = new Date(result.time + Math.round(startTimeOffset * 60000))
+		}
+	}
+	else if (starting && location.timeZone) {
+		result = timeToday(starting, location.timeZone)
+	}
+	log.trace "timeWindowStart = ${result}"
+	result
+}
+
+private timeWindowStop() {
+	def result = null
+	if (endTimeType == "sunrise") {
+		result = location.currentState("sunriseTime")?.dateValue
+		if (result && endTimeOffset) {
+			result = new Date(result.time + Math.round(endTimeOffset * 60000))
+		}
+	}
+	else if (endTimeType == "sunset") {
+		result = location.currentState("sunsetTime")?.dateValue
+		if (result && endTimeOffset) {
+			result = new Date(result.time + Math.round(endTimeOffset * 60000))
+		}
+	}
+	else if (ending && location.timeZone) {
+		result = timeToday(ending, location.timeZone)
+	}
+	log.trace "timeWindowStop = ${result}"
+	result
 }
 
-//fomrats time to readable format for time label
 private hhmm(time, fmt = "h:mm a")
 {
 	def t = timeToday(time, location.timeZone)
@@ -357,6 +401,41 @@ private hhmm(time, fmt = "h:mm a")
 	f.format(t)
 }
 
+private timeIntervalLabel() {
+	def start = ""
+	switch (startTimeType) {
+		case "time":
+			if (ending) {
+            	start += hhmm(starting)
+            }
+			break
+		case "sunrise":
+		case "sunset":
+        	start += startTimeType[0].toUpperCase() + startTimeType[1..-1]
+			if (startTimeOffset) {
+				start += startTimeOffset > 0 ? "+${startTimeOffset} min" : "${startTimeOffset} min"
+			}
+			break
+	}
+
+    def finish = ""
+	switch (endTimeType) {
+		case "time":
+			if (ending) {
+            	finish += hhmm(ending)
+            }
+			break
+		case "sunrise":
+		case "sunset":
+        	finish += endTimeType[0].toUpperCase() + endTimeType[1..-1]
+			if (endTimeOffset) {
+				finish += endTimeOffset > 0 ? "+${endTimeOffset} min" : "${endTimeOffset} min"
+			}
+			break
+	}
+	start && finish ? "${start} to ${finish}" : ""
+}
+
 //sets complete/not complete for the setup section on the main dynamic page
 def greyedOut(){
 	def result = ""
@@ -369,16 +448,7 @@ def greyedOut(){
 //sets complete/not complete for the settings section on the main dynamic page
 def greyedOutSettings(){
 	def result = ""
-    if (starting || ending || days || falseAlarmThreshold) {
-    	result = "complete"	
-    }
-    result
-}
-
-//sets complete/not complete for time restriction section in settings
-def greyedOutTime(starting, ending){
-	def result = ""
-    if (starting || ending) {
+    if (people || days || falseAlarmThreshold ) {
     	result = "complete"	
     }
     result