MSA-992: 테스트

devicetypes/-/-.src/-.groovy

@@ -0,0 +1,42 @@
+/**
+ *  내가만든장치
+ *
+ *  Copyright 2016 이진희
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "내가만든장치", namespace: "내가만든장치", author: "이진희") {
+		capability "Health Check"
+		capability "Test Capability"
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		// TODO: define your main and details tiles here
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+	// TODO: handle 'checkInterval' attribute
+
+}
+
+// handle commands
+def ping() {
+	log.debug "Executing 'ping'"
+	// TODO: handle 'ping' command
+}

devicetypes/smartthings/aeon-home-energy-meter-with-pcode.src/aeon-home-energy-meter-with-pcode.groovy

@@ -1,143 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Aeon Home Energy Meter
- *
- *  Author: SmartThings
- *
- *  Date: 2013-05-30
- */
-metadata {
-	definition (name: "Aeon Home Energy Meter With PCode", namespace: "smartthings", author: "SmartThings") {
-		capability "Energy Meter"
-		capability "Power Meter"
-		capability "Configuration"
-		capability "Sensor"
-        
-        attribute "ManufacturerCode", "string"
-		attribute "ProductCode", "string"
-		attribute "ProduceTypeCode", "string"
-		attribute "WirelessConfig", "string"
-
-		command "reset"
-
-		fingerprint deviceId: "0x2101", inClusters: " 0x70,0x31,0x72,0x86,0x32,0x80,0x85,0x60"
-	}
-
-	// simulator metadata
-	simulator {
-		for (int i = 0; i <= 10000; i += 1000) {
-			status "power  ${i} W": new physicalgraph.zwave.Zwave().meterV1.meterReport(
-				scaledMeterValue: i, precision: 3, meterType: 4, scale: 2, size: 4).incomingMessage()
-		}
-		for (int i = 0; i <= 100; i += 10) {
-			status "energy  ${i} kWh": new physicalgraph.zwave.Zwave().meterV1.meterReport(
-				scaledMeterValue: i, precision: 3, meterType: 0, scale: 0, size: 4).incomingMessage()
-		}
-	}
-
-	// tile definitions
-	tiles {
-		valueTile("power", "device.power", decoration: "flat") {
-			state "default", label:'${currentValue} W'
-		}
-		valueTile("energy", "device.energy", decoration: "flat") {
-			state "default", label:'${currentValue} kWh'
-		}
-		standardTile("reset", "device.energy", inactiveLabel: false, decoration: "flat") {
-			state "default", label:'reset kWh', action:"reset"
-		}
-		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		standardTile("configure", "device.power", inactiveLabel: false, decoration: "flat") {
-			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
-		}
-
-		main (["power","energy"])
-		details(["power","energy", "reset","refresh", "configure"])
-	}
-}
-
-def parse(String description) {
-	def result = null
-	def cmd = zwave.parse(description, [0x31: 1, 0x32: 1, 0x60: 3])
-	if (cmd) {
-		result = createEvent(zwaveEvent(cmd))
-	}
-	log.debug "Parse returned ${result?.descriptionText}"
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.meterv1.MeterReport cmd) {
-	if (cmd.scale == 0) {
-		[name: "energy", value: cmd.scaledMeterValue, unit: "kWh"]
-	} else if (cmd.scale == 1) {
-		[name: "energy", value: cmd.scaledMeterValue, unit: "kVAh"]
-	}
-	else {
-		[name: "power", value: Math.round(cmd.scaledMeterValue), unit: "W"]
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	// Handles all Z-Wave commands we aren't interested in
-	[:]
-}
-
-def refresh() {
-	delayBetween([
-		zwave.meterV2.meterGet(scale: 0).format(),
-		zwave.meterV2.meterGet(scale: 2).format()
-	])
-}
-
-def reset() {
-	// No V1 available
-	return [
-		zwave.meterV2.meterReset().format(),
-		zwave.meterV2.meterGet(scale: 0).format()
-	]
-}
-
-def configure() {
-	def cmd = delayBetween([
-    	zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
-		zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 4).format(),   // combined power in watts
-		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 900).format(), // every 5 min
-		zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 8).format(),   // combined energy in kWh
-		zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 3600).format(), // every 5 min
-		zwave.configurationV1.configurationSet(parameterNumber: 103, size: 4, scaledConfigurationValue: 0).format(),    // no third report
-		zwave.configurationV1.configurationSet(parameterNumber: 113, size: 4, scaledConfigurationValue: 900).format() // every 5 min
-	])
-	log.debug cmd
-	cmd
-}
-
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	def result = []
-
-	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
-	def productCode = String.format("%04X", cmd.productId)
-	def produceTypeCode = String.format("%04X", cmd.productTypeId)
-	def wirelessConfig = "ZWA"
-	
-	sendEvent(name: "ManufacturerCode", value: manufacturerCode)
-	sendEvent(name: "ProductCode", value: productCode)
-	sendEvent(name: "ProduceTypeCode", value: produceTypeCode)
-	sendEvent(name: "WirelessConfig", value: wirelessConfig)
-	
-	result << createEvent(descriptionText: "$device.displayName", isStateChange: false)
-
-	return result
-}

devicetypes/smartthings/aeon-smart-switch-gen5.src/aeon-smart-switch-gen5.groovy

@@ -1,200 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Aeon Smart Switch GEN5", namespace: "smartthings", author: "SmartThings") {
-		capability "Power Meter"
-		capability "Energy Meter"
-		capability "Actuator"
-		capability "Switch"
-		capability "Configuration"
-		capability "Polling"
-		capability "Refresh"
-		capability "Sensor"
-        
-        attribute "ManufacturerCode", "string"
-		attribute "ProductCode", "string"
-		attribute "ProduceTypeCode", "string"
-		attribute "WirelessConfig", "string"
-
-
-		command "reset"
-        
-
-		fingerprint deviceId: "0x1001", inClusters: "0x25,0x32,0x27,0x2C,0x2B,0x70,0x85,0x56,0x72,0x86,0x5E,0x59,0x7A,0x73,0x98,0xEF,0x5A,0x82", outClusters: "0x82"
-	}
-
-	// simulator metadata
-	simulator {
-		status "on":  "command: 2003, payload: FF"
-		status "off": "command: 2003, payload: 00"
-
-		for (int i = 0; i <= 100; i += 10) {
-			status "energy  ${i} kWh": new physicalgraph.zwave.Zwave().meterV2.meterReport(
-				scaledMeterValue: i, precision: 3, meterType: 0, scale: 0, size: 4).incomingMessage()
-		}
-
-		// reply messages
-		reply "2001FF,delay 100,2502": "command: 2503, payload: FF"
-		reply "200100,delay 100,2502": "command: 2503, payload: 00"
-
-	}
-
-	// tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
-			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
-		}
-		valueTile("power", "device.power", decoration: "flat") {
-			state "default", label:'${currentValue} W'
-		} 
-		valueTile("energy", "device.energy", decoration: "flat") {
-			state "default", label:'${currentValue} kWh'
-		}        
-		standardTile("configure", "device.power", inactiveLabel: false, decoration: "flat") {
-			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
-		}
-		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main "switch"
-		details(["switch","power","energy","refresh","configure"])
-	}
-}
-
-def parse(String description) {
-
-	def result = null
-	def cmd = zwave.parse(description, [0x20: 1, 0x32: 2])
-	if (cmd) {
-		log.debug cmd
-		result = createEvent(zwaveEvent(cmd))
-	}
-	return result
-}
-
-
-def zwaveEvent(physicalgraph.zwave.commands.meterv3.MeterReport cmd) {
-		log.debug "MeterReport ${cmd}"
-
-	if (cmd.scale == 0) {
-		[name: "energy", value: cmd.scaledMeterValue, unit: "kWh"]
-	} else if (cmd.scale == 1) {
-		[name: "energy", value: cmd.scaledMeterValue, unit: "kVAh"]
-	}
-	else {
-		[name: "power", value: Math.round(cmd.scaledMeterValue), unit: "W"]
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd)
-{
-	[
-		name: "switch", value: cmd.value ? "on" : "off", type: "physical"
-	]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd)
-{
-	[
-		name: "switch", value: cmd.value ? "on" : "off", type: "digital"
-	]
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	// Handles all Z-Wave commands we aren't interested in
-   	return createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
-	[:]
-}
-
-def on() {
-	delayBetween([
-		secure(zwave.basicV1.basicSet(value: 0xFF)),
-		secure(zwave.switchBinaryV1.switchBinaryGet())
-	])
-}
-
-def off() {
-	delayBetween([
-		secure(zwave.basicV1.basicSet(value: 0x00)),
-		secure(zwave.switchBinaryV1.switchBinaryGet())
-	])
-}
-
-def poll() {
-	delayBetween([
-		secure(zwave.switchBinaryV1.switchBinaryGet()),
-		secure(zwave.meterV2.meterGet())
-	])
-}
-
-def refresh() {
-	secure(zwave.switchBinaryV1.switchBinaryGet())  
-}
-
-def reset() {
-	return [
-		secure(zwave.meterV2.meterReset()),
-		secure(zwave.meterV2.meterGet())
-	]
-}
-
-def configure() {
-	delayBetween([
-    	zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),    
-		secure(zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 8)),   // energy in kWh
-		secure(zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 300)), // every 1 min
-		secure(zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 4)),
-		secure(zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 900)),
-		secure(zwave.configurationV1.configurationSet(parameterNumber: 103, size: 4, scaledConfigurationValue: 0))
-	])
-}
-
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	def result = []
-
-	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
-	def productCode = String.format("%04X", cmd.productId)
-	def produceTypeCode = String.format("%04X", cmd.productTypeId)
-	def wirelessConfig = "ZWP"
-	
-	sendEvent(name: "ManufacturerCode", value: manufacturerCode)
-	sendEvent(name: "ProductCode", value: productCode)
-	sendEvent(name: "ProduceTypeCode", value: produceTypeCode)
-	sendEvent(name: "WirelessConfig", value: wirelessConfig)
-	
-	result << createEvent(descriptionText: "$device.displayName", isStateChange: false)
-
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x85: 2, 0x70: 1])
-	log.debug "encapsulated: $encapsulatedCommand"
-	if (encapsulatedCommand) {
-		state.sec = 1
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
-
-private secure(physicalgraph.zwave.Command cmd) {
-	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-}
-
-private secureSequence(commands, delay=200) {
-	delayBetween(commands.collect{ secure(it) }, delay)
-}

smartapps/test/test.src/test.groovy

@@ -0,0 +1,50 @@
+/**
+ *  test 앱
+ *
+ *  Copyright 2016 이진희
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "test 앱",
+    namespace: "test앱",
+    author: "이진희",
+    description: "\uD14C\uC2A4\uD2B8\uC785\uB2C8\uB2E4",
+    category: "",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+	section("Title") {
+		// TODO: put inputs here
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+}
+
+// TODO: implement event handlers