Merge pull request #664 from SmartThingsCommunity/staging

Rolling up changes to production from staging 2016-03-25 Release

devicetypes/-/-.src/-.groovy

@@ -1,42 +0,0 @@
-/**
- *  내가만든장치
- *
- *  Copyright 2016 이진희
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "내가만든장치", namespace: "내가만든장치", author: "이진희") {
-		capability "Health Check"
-		capability "Test Capability"
-	}
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles {
-		// TODO: define your main and details tiles here
-	}
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"
-	// TODO: handle 'checkInterval' attribute
-
-}
-
-// handle commands
-def ping() {
-	log.debug "Executing 'ping'"
-	// TODO: handle 'ping' command
-}

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -17,13 +17,16 @@ metadata {
 
 	tiles(scale: 2) {
      	multiAttributeTile(name:"rich-control"){
-			tileAttribute ("", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 	            attributeState "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#F3C200"
-			}
+			}    
 	        tileAttribute ("serialNumber", key: "SECONDARY_CONTROL") {
 	            attributeState "default", label:'SN: ${currentValue}'
-			}
-        }
+			}    
+        }    
+		standardTile("icon", "icon", width: 1, height: 1, canChangeIcon: false, inactiveLabel: true, canChangeBackground: false) {
+			state "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#FFFFFF"
+		}
 		valueTile("serialNumber", "device.serialNumber", decoration: "flat", height: 1, width: 2, inactiveLabel: false) {
 			state "default", label:'SN: ${currentValue}'
 		}
@@ -31,7 +34,7 @@ metadata {
 			state "default", label:'${currentValue}', height: 1, width: 2, inactiveLabel: false
 		}
 
-		main (["rich-control"])
+		main (["icon"])
 		details(["rich-control", "networkAddress"])
 	}
 }
@@ -72,7 +75,6 @@ def parse(description) {
 				}
 				else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
-                    parent.hubVerification(device.hub.id, msg.body)
 				}
 			}
 		}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -3,7 +3,6 @@
  *
  *  Author: SmartThings
  */
-
 // for the UI
 metadata {
 	// Automatically generated. Make future change here.
@@ -28,10 +27,10 @@ metadata {
 	tiles (scale: 2){
 		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#C6C7CC", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#C6C7CC", nextState:"turningOn"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
@@ -44,10 +43,16 @@ metadata {
 			}
 		}
 
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+		}
+
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
-
         valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "colorTemperature", label: '${currentValue} K'
         }
@@ -55,12 +60,29 @@ metadata {
 		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
-
-		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("refresh", "device.switch", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+			state "level", label: 'Level ${currentValue}%'
+		}
+		controlTile("saturationSliderControl", "device.saturation", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "saturation", action:"color control.setSaturation"
+		}
+		valueTile("saturation", "device.saturation", inactiveLabel: false, decoration: "flat") {
+			state "saturation", label: 'Sat ${currentValue}    '
+		}
+		controlTile("hueSliderControl", "device.hue", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "hue", action:"color control.setHue"
+		}
+		valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
+			state "hue", label: 'Hue ${currentValue}   '
+		}
 
-		main(["rich-control"])
+		main(["switch"])
 		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
 	}
 }
@@ -105,34 +127,34 @@ void nextLevel() {
 void setLevel(percent) {
 	log.debug "Executing 'setLevel'"
 	parent.setLevel(this, percent)
-	sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
+	sendEvent(name: "level", value: percent)
 }
 
 void setSaturation(percent) {
 	log.debug "Executing 'setSaturation'"
 	parent.setSaturation(this, percent)
-	sendEvent(name: "saturation", value: percent, displayed: false)
+	sendEvent(name: "saturation", value: percent)
 }
 
 void setHue(percent) {
 	log.debug "Executing 'setHue'"
 	parent.setHue(this, percent)
-	sendEvent(name: "hue", value: percent, displayed: false)
+	sendEvent(name: "hue", value: percent)
 }
 
 void setColor(value) {
 	log.debug "setColor: ${value}, $this"
 	parent.setColor(this, value)
-	if (value.hue) { sendEvent(name: "hue", value: value.hue, displayed: false)}
-	if (value.saturation) { sendEvent(name: "saturation", value: value.saturation, displayed: false)}
+	if (value.hue) { sendEvent(name: "hue", value: value.hue)}
+	if (value.saturation) { sendEvent(name: "saturation", value: value.saturation)}
 	if (value.hex) { sendEvent(name: "color", value: value.hex)}
-	if (value.level) { sendEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")}
-	sendEvent(name: "switch", value: "on")
+	if (value.level) { sendEvent(name: "level", value: value.level)}
+	if (value.switch) { sendEvent(name: "switch", value: value.switch)}
 }
 
 void reset() {
 	log.debug "Executing 'reset'"
-    def value = [level:100, saturation:56, hue:23]
+    def value = [level:100, hex:"#90C638", saturation:56, hue:23]
     setAdjustedColor(value)
 	parent.poll()
 }

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -36,6 +36,13 @@ metadata {
 			}
         }
 
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+        }
+
         controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
             state "level", action:"switch level.setLevel"
         }
@@ -44,7 +51,7 @@ metadata {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 
-        main(["rich-control"])
+        main(["switch"])
         details(["rich-control", "refresh"])
     }
 }

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -203,7 +203,7 @@ private List parseContactMessage(String description) {
 	parts.each { part ->
 		part = part.trim()
 		if (part.startsWith('contactState:')) {
-			results << getContactResult(part, description)
+			results.addAll(getContactResult(part, description))
 		}
 		else if (part.startsWith('accelerationState:')) {
 			results << getAccelerationResult(part, description)
@@ -316,7 +316,7 @@ private List getContactResult(part, description) {
 	results
 }
 
-private getAccelerationResult(part, description) {
+private Map getAccelerationResult(part, description) {
 	def name = "acceleration"
 	def value = part.endsWith("1") ? "active" : "inactive"
 	def linkText = getLinkText(device)
@@ -335,7 +335,7 @@ private getAccelerationResult(part, description) {
 	]
 }
 
-private getTempResult(part, description) {
+private Map getTempResult(part, description) {
 	def name = "temperature"
 	def temperatureScale = getTemperatureScale()
 	def value = zigbee.parseSmartThingsTemperatureValue(part, "temp: ", temperatureScale)
@@ -360,7 +360,7 @@ private getTempResult(part, description) {
 	]
 }
 
-private getXyzResult(results, description) {
+private Map getXyzResult(results, description) {
 	def name = "threeAxis"
 	def value = "${results.x},${results.y},${results.z}"
 	def linkText = getLinkText(device)
@@ -379,7 +379,7 @@ private getXyzResult(results, description) {
 	]
 }
 
-private getBatteryResult(part, description) {
+private Map getBatteryResult(part, description) {
 	def batteryDivisor = description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"} ? description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"}.split(":")[1].trim() : null
 	def name = "battery"
 	def value = zigbee.parseSmartThingsBatteryValue(part, batteryDivisor)
@@ -400,7 +400,7 @@ private getBatteryResult(part, description) {
 	]
 }
 
-private getRssiResult(part, description, lastHop=false) {
+private Map getRssiResult(part, description, lastHop=false) {
 	def name = lastHop ? "lastHopRssi" : "rssi"
 	def valueString = part.split(":")[1].trim()
 	def value = (Integer.parseInt(valueString) - 128).toString()
@@ -431,7 +431,7 @@ private getRssiResult(part, description, lastHop=false) {
  * Note: To make the signal strength indicator more accurate, we could combine
  * LQI with RSSI.
  */
-private getLqiResult(part, description, lastHop=false) {
+private Map getLqiResult(part, description, lastHop=false) {
 	def name = lastHop ? "lastHopLqi" : "lqi"
 	def valueString = part.split(":")[1].trim()
 	def percentageOf = 255

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -57,7 +57,7 @@ def parse(String description) {
 	return result
 }
 
-def sensorValueEvent(value) {
+def sensorValueEvent(Short value) {
 	if (value) {
 		createEvent(name: "motion", value: "active", descriptionText: "$device.displayName detected motion")
 	} else {
@@ -94,24 +94,24 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 {
 	def result = []
 	if (cmd.notificationType == 0x07) {
-		if (cmd.v1AlarmType == 0x07) {  // special case for nonstandard messages from Monoprice ensors
-			result << sensorValueEvent(cmd.v1AlarmLevel)
-		} else if (cmd.event == 0x01 || cmd.event == 0x02 || cmd.event == 0x07 || cmd.event == 0x08) {
+		if (cmd.event == 0x01 || cmd.event == 0x02) {
 			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x00) {
-			result << sensorValueEvent(0)
 		} else if (cmd.event == 0x03) {
-			result << createEvent(name: "tamper", value: "detected", descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			result << response(zwave.batteryV1.batteryGet())
+			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId))
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
 			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
+		} else if (cmd.event == 0x07) {
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+			result << sensorValueEvent(1)
 		}
 	} else if (cmd.notificationType) {
 		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
-		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, isStateChange: true, displayed: false)
+		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
 	} else {
 		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
-		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, isStateChange: true, displayed: false)
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
 	}
 	result
 }

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -61,44 +61,37 @@ def parse(String description) {
 			zwaveEvent(cmd, results)
 		}
 	}
-	log.debug "'$description' parsed to ${results.inspect()}"
+	// log.debug "\"$description\" parsed to ${results.inspect()}"
 	return results
 }
 
 
 def createSmokeOrCOEvents(name, results) {
 	def text = null
-	switch (name) {
-		case "smoke":
-			text = "$device.displayName smoke was detected!"
-			// these are displayed:false because the composite event is the one we want to see in the app
-			results << createEvent(name: "smoke",          value: "detected", descriptionText: text, displayed: false)
-			break
-		case "carbonMonoxide":
-			text = "$device.displayName carbon monoxide was detected!"
-			results << createEvent(name: "carbonMonoxide", value: "detected", descriptionText: text, displayed: false)
-			break
-		case "tested":
-			text = "$device.displayName was tested"
-			results << createEvent(name: "smoke",          value: "tested", descriptionText: text, displayed: false)
-			results << createEvent(name: "carbonMonoxide", value: "tested", descriptionText: text, displayed: false)
-			break
-		case "smokeClear":
-			text = "$device.displayName smoke is clear"
-			results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
-			name = "clear"
-			break
-		case "carbonMonoxideClear":
-			text = "$device.displayName carbon monoxide is clear"
-			results << createEvent(name: "carbonMonoxide", value: "clear", descriptionText: text, displayed: false)
-			name = "clear"
-			break
-		case "testClear":
-			text = "$device.displayName test cleared"
-			results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
-			results << createEvent(name: "carbonMonoxide", value: "clear", displayed: false)
-			name = "clear"
-			break
+	if (name == "smoke") {
+		text = "$device.displayName smoke was detected!"
+		// these are displayed:false because the composite event is the one we want to see in the app
+		results << createEvent(name: "smoke",          value: "detected", descriptionText: text, displayed: false)
+	} else if (name == "carbonMonoxide") {
+		text = "$device.displayName carbon monoxide was detected!"
+		results << createEvent(name: "carbonMonoxide", value: "detected", descriptionText: text, displayed: false)
+	} else if (name == "tested") {
+		text = "$device.displayName was tested"
+		results << createEvent(name: "smoke",          value: "tested", descriptionText: text, displayed: false)
+		results << createEvent(name: "carbonMonoxide", value: "tested", descriptionText: text, displayed: false)
+	} else if (name == "smokeClear") {
+		text = "$device.displayName smoke is clear"
+		results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
+		name = "clear"
+	} else if (name == "carbonMonoxideClear") {
+		text = "$device.displayName carbon monoxide is clear"
+		results << createEvent(name: "carbonMonoxide", value: "clear", descriptionText: text, displayed: false)
+		name = "clear"
+	} else if (name == "testClear") {
+		text = "$device.displayName smoke is clear"
+		results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
+		results << createEvent(name: "carbonMonoxide", value: "clear", displayed: false)
+		name = "clear"
 	}
 	// This composite event is used for updating the tile
 	results << createEvent(name: "alarmState", value: name, descriptionText: text)
@@ -124,10 +117,8 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd, results) {
 			createSmokeOrCOEvents(cmd.alarmLevel ? "tested" : "testClear", results)
 			break
 		case 13:  // sent every hour -- not sure what this means, just a wake up notification?
-			if (cmd.alarmLevel == 255) {
-				results << createEvent(descriptionText: "$device.displayName checked in", isStateChange: false)
-			} else {
-				results << createEvent(descriptionText: "$device.displayName code 13 is $cmd.alarmLevel", isStateChange:true, displayed:false)
+			if (cmd.alarmLevel != 255) {
+				results << createEvent(descriptionText: "$device.displayName code 13 is $cmd.alarmLevel", displayed: true)
 			}
 			
 			// Clear smoke in case they pulled batteries and we missed the clear msg
@@ -136,8 +127,9 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd, results) {
 			}
 			
 			// Check battery if we don't have a recent battery event
-			if (!state.lastbatt || (now() - state.lastbatt) >= 48*60*60*1000) {
-				results << response(zwave.batteryV1.batteryGet())
+			def prevBattery = device.currentState("battery")
+			if (!prevBattery || (new Date().time - prevBattery.date.time)/60000 >= 60 * 53) {
+				results << new physicalgraph.device.HubAction(zwave.batteryV1.batteryGet().format())
 			}
 			break
 		default:
@@ -166,17 +158,12 @@ def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd,
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd, results) {
+	results << new physicalgraph.device.HubAction(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
 	results << createEvent(descriptionText: "$device.displayName woke up", isStateChange: false)
-	if (!state.lastbatt || (now() - state.lastbatt) >= 56*60*60*1000) {
-		results << response(zwave.batteryV1.batteryGet(), "delay 2000", zwave.wakeUpV1.wakeUpNoMoreInformation())
-	} else {
-		results << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
-	}
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd, results) {
-	def map = [ name: "battery", unit: "%", isStateChange: true ]
-	state.lastbatt = now()
+	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
 		map.value = 1
 		map.descriptionText = "$device.displayName battery is low!"

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -24,7 +24,7 @@ definition(
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
-    singleInstance: true
+        //singleInstance: true
 )
 
 preferences {
@@ -68,7 +68,7 @@ def bridgeDiscovery(params=[:])
 	}
 
 	//setup.xml request every 3 seconds except on discoveries
-	if(((bridgeRefreshCount % 3) == 0) && ((bridgeRefreshCount % 5) != 0)) {
+	if(((bridgeRefreshCount % 1) == 0) && ((bridgeRefreshCount % 5) != 0)) {
 		verifyHueBridges()
 	}
 
@@ -175,7 +175,6 @@ private discoverHueBulbs() {
 }
 
 private verifyHueBridge(String deviceNetworkId, String host) {
-	log.trace "Verify Hue Bridge $deviceNetworkId"
 	sendHubCommand(new physicalgraph.device.HubAction([
 		method: "GET",
 		path: "/description.xml",
@@ -603,20 +602,6 @@ def parse(childDevice, description) {
 	}
 }
 
-def hubVerification(bodytext) {
-	log.trace "Bridge sent back description.xml for verification"
-    def body = new XmlSlurper().parseText(bodytext)
-    if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
-        def bridges = getHueBridges()
-        def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
-        if (bridge) {
-            bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
-        } else {
-            log.error "/description.xml returned a bridge that didn't exist"
-        }
-    }
-}
-
 def on(childDevice) {
 	log.debug "Executing 'on'"
 	put("lights/${getId(childDevice)}/state", [on: true])
@@ -658,25 +643,21 @@ def setColorTemperature(childDevice, huesettings) {
 
 def setColor(childDevice, huesettings) {
 	log.debug "Executing 'setColor($huesettings)'"
-    def hue = null
-    def sat = null
-    def xy = null
-    if (huesettings.hex) {
-    	xy = getHextoXY(huesettings.hex)
-    } else if (huesettings.hue && huesettings.saturation) {
-		hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
-		sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
-    }
+	def hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
+	def sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
     def alert = huesettings.alert ? huesettings.alert : "none"
     def transition = huesettings.transition ? huesettings.transition : 4
 
-	def value = [xy: xy, sat: sat, hue: hue, alert: alert, transitiontime: transition, on: true]
-
+	def value = [sat: sat, hue: hue, alert: alert, transitiontime: transition]
 	if (huesettings.level != null) {
         if (huesettings.level == 1) value.bri = 1 else value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
 		value.on = value.bri > 0
 	}
 
+	if (huesettings.switch) {
+		value.on = huesettings.switch == "on"
+	}
+
 	log.debug "sending command $value"
 	put("lights/${getId(childDevice)}/state", value)
 }
@@ -762,59 +743,6 @@ private getBridgeIP() {
     return host
 }
 
-private getHextoXY(String colorStr) {
-    // For the hue bulb the corners of the triangle are:
-    // -Red: 0.675, 0.322
-    // -Green: 0.4091, 0.518
-    // -Blue: 0.167, 0.04
-
-    def cred = Integer.valueOf( colorStr.substring( 1, 3 ), 16 )
-    def cgreen = Integer.valueOf( colorStr.substring( 3, 5 ), 16 )
-    def cblue = Integer.valueOf( colorStr.substring( 5, 7 ), 16 )
-
-    double[] normalizedToOne = new double[3];
-    normalizedToOne[0] = (cred / 255);
-    normalizedToOne[1] = (cgreen / 255);
-    normalizedToOne[2] = (cblue / 255);
-    float red, green, blue;
-
-    // Make red more vivid
-    if (normalizedToOne[0] > 0.04045) {
-        red = (float) Math.pow(
-                (normalizedToOne[0] + 0.055) / (1.0 + 0.055), 2.4);
-    } else {
-        red = (float) (normalizedToOne[0] / 12.92);
-    }
-
-    // Make green more vivid
-    if (normalizedToOne[1] > 0.04045) {
-        green = (float) Math.pow((normalizedToOne[1] + 0.055)
-                / (1.0 + 0.055), 2.4);
-    } else {
-        green = (float) (normalizedToOne[1] / 12.92);
-    }
-
-    // Make blue more vivid
-    if (normalizedToOne[2] > 0.04045) {
-        blue = (float) Math.pow((normalizedToOne[2] + 0.055)
-                / (1.0 + 0.055), 2.4);
-    } else {
-        blue = (float) (normalizedToOne[2] / 12.92);
-    }
-
-    float X = (float) (red * 0.649926 + green * 0.103455 + blue * 0.197109);
-    float Y = (float) (red * 0.234327 + green * 0.743075 + blue * 0.022598);
-    float Z = (float) (red * 0.0000000 + green * 0.053077 + blue * 1.035763);
-
-    float x = X / (X + Y + Z);
-    float y = Y / (X + Y + Z);
-
-    double[] xy = new double[2];
-    xy[0] = x;
-    xy[1] = y;
-    return xy;
-}
-
 private Integer convertHexToInt(hex) {
 	Integer.parseInt(hex,16)
 }

smartapps/test/test.src/test.groovy

@@ -1,50 +0,0 @@
-/**
- *  test 앱
- *
- *  Copyright 2016 이진희
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "test 앱",
-    namespace: "test앱",
-    author: "이진희",
-    description: "\uD14C\uC2A4\uD2B8\uC785\uB2C8\uB2E4",
-    category: "",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
-
-
-preferences {
-	section("Title") {
-		// TODO: put inputs here
-	}
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-	// TODO: subscribe to attributes, devices, locations, etc.
-}
-
-// TODO: implement event handlers

smartapps/tslagle13/vacation-lighting-director.src/vacation-lighting-director.groovy

@@ -1,17 +1,11 @@
 /**
  *  Vacation Lighting Director
  * 
- * Version  2.5 - Moved scheduling over to Cron and added time as a trigger. 
- *				  Cleaned up formatting and some typos.
- *                Updated license.
- *                Made people option optional
- * 				  Added sttement to unschedule on mode change if people option is not selected
- *
- * Version  2.4 - Added information paragraphs
+ *  Version  2.4 - Added information paragraphs
  * 
  *  Source code can be found here: https://github.com/tslagle13/SmartThings/blob/master/smartapps/tslagle13/vacation-lighting-director.groovy
  *
- *  Copyright 2016 Tim Slagle
+ *  Copyright 2015 Tim Slagle
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -57,7 +51,8 @@ def pageSetup() {
 	return dynamicPage(pageProperties) {
     	section(""){
         	paragraph "This app can be used to make your home seem occupied anytime you are away from your home. " +
-			"Please use each of the the sections below to setup the different preferences to your liking. " 
+			"Please use each othe the sections below to setup the different preferences to your liking. " +
+			"I recommend this app be used with at least two away modes.  An example would be 'Away Day' 'and Away Night'. " 
         }
         section("Setup Menu") {
             href "Setup", title: "Setup", description: "", state:greyedOut()
@@ -75,7 +70,7 @@ def Setup() {
     def newMode = [
         name:       	"newMode",
         type:       	"mode",
-        title:      	"Modes",
+        title:      	"Which?",
         multiple:   	true,
         required:   	true
     ]
@@ -101,6 +96,14 @@ def Setup() {
         required:	true,
     ]
     
+    def people = [
+        name:       "people",
+        type:       "capability.presenceSensor",
+        title:      "If these people are home do not change light status",
+        required:	true,
+        multiple:	true
+    ]
+    
     def pageName = "Setup"
     
     def pageProperties = [
@@ -113,11 +116,10 @@ def Setup() {
 
 		section(""){            
                     paragraph "In this section you need to setup the deatils of how you want your lighting to be affected while " +
-                    "you are away.  All of these settings are required in order for the simulator to run correctly."
+                    paragraph "you are away.  All of these settings are required in order for the simulator to run correctly."
         }
-        section("Simulator Triggers") {
-                    input newMode  
-                    href "timeIntervalInput", title: "Times", description: timeIntervalLabel(), refreshAfterSelection:true
+        section("Which mode change triggers the simulator? (This app will only run in selected mode(s))") {
+                    input newMode           
         }
         section("Light switches to turn on/off") {
                     input switches           
@@ -128,6 +130,9 @@ def Setup() {
         section("Number of active lights at any given time") {
                     input number_of_active_lights           
         }    
+        section("People") {
+                    input people            
+        }
     }
     
 }
@@ -157,29 +162,18 @@ def Settings() {
         title:      "Settings",
         nextPage:   "pageSetup"
     ]
-    
-    def people = [
-        name:       "people",
-        type:       "capability.presenceSensor",
-        title:      "If these people are home do not change light status",
-        required:	false,
-        multiple:	true
-    ]
 
     return dynamicPage(pageProperties) {
 
 		section(""){              
                     paragraph "In this section you can restrict how your simulator runs.  For instance you can restrict on which days it will run " +
-                    "as well as a delay for the simulator to start after it is in the correct mode.  Delaying the simulator helps with false starts based on a incorrect mode change."
+                    paragraph "as well as a delay for the simulator to start after it is in the correct mode.  Delaying the simulator helps with false starts based on a incorrect mode change."
         }
         section("Delay to start simulator") {
                     input falseAlarmThreshold
         }
-        section("People") {
-        			paragraph "Not using this setting may cause some lights to remain on when you arrive home"
-                    input people            
-        }
         section("More options") {
+                    href "timeIntervalInput", title: "Only during a certain time", description: getTimeLabel(starting, ending), state: greyedOutTime(starting, ending), refreshAfterSelection:true
                     input days
         } 
     }   
@@ -187,24 +181,9 @@ def Settings() {
 
 page(name: "timeIntervalInput", title: "Only during a certain time", refreshAfterSelection:true) {
 		section {
-			input "startTimeType", "enum", title: "Starting at", options: [["time": "A specific time"], ["sunrise": "Sunrise"], ["sunset": "Sunset"]], defaultValue: "time", submitOnChange: true
-			if (startTimeType in ["sunrise","sunset"]) {
-				input "startTimeOffset", "number", title: "Offset in minutes (+/-)", range: "*..*", required: false
-			}
-			else {
-				input "starting", "time", title: "Start time", required: false
-			}
+			input "starting", "time", title: "Starting", required: false 
+			input "ending", "time", title: "Ending", required: false 
 		}
-		section {
-			input "endTimeType", "enum", title: "Ending at", options: [["time": "A specific time"], ["sunrise": "Sunrise"], ["sunset": "Sunset"]], defaultValue: "time", submitOnChange: true
-			if (endTimeType in ["sunrise","sunset"]) {
-				input "endTimeOffset", "number", title: "Offset in minutes (+/-)", range: "*..*", required: false
-			}
-			else {
-				input "ending", "time", title: "End time", required: false
-			}
-		}
-        
 }
 
 def installed() {
@@ -222,13 +201,10 @@ def initialize(){
 	if (newMode != null) {
 		subscribe(location, modeChangeHandler)
     }
-    if (starting != null) {
-    	schedule(starting, modeChangeHandler)
-    }
-    log.debug "Installed with settings: ${settings}"
 }
 
 def modeChangeHandler(evt) {
+	log.debug "Mode change to: ${evt.value}"
 		def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 2 * 60  
     	runIn(delay, scheduleCheck)
 }
@@ -236,54 +212,48 @@ def modeChangeHandler(evt) {
 
 //Main logic to pick a random set of lights from the large set of lights to turn on and then turn the rest off
 def scheduleCheck(evt) {
-    if(allOk){
-        log.debug("Running")
-        // turn off all the switches
-        switches.off()
-        
-        // grab a random switch
-        def random = new Random()
-        def inactive_switches = switches
-        for (int i = 0 ; i < number_of_active_lights ; i++) {
-            // if there are no inactive switches to turn on then let's break
-            if (inactive_switches.size() == 0){
-                break
-            }
-            
-            // grab a random switch and turn it on
-            def random_int = random.nextInt(inactive_switches.size())
-            inactive_switches[random_int].on()
-            
-            // then remove that switch from the pool off switches that can be turned on
-            inactive_switches.remove(random_int)
-        }
-        
-        // re-run again when the frequency demands it
-        schedule("0 0/${frequency_minutes} * 1/1 * ? *", scheduleCheck)
+if(allOk){
+log.debug("Running")
+  // turn off all the switches
+  switches.off()
+
+  // grab a random switch
+  def random = new Random()
+  def inactive_switches = switches
+  for (int i = 0 ; i < number_of_active_lights ; i++) {
+    // if there are no inactive switches to turn on then let's break
+    if (inactive_switches.size() == 0){
+      break
     }
-    //Check to see if mode is ok but not time/day.  If mode is still ok, check again after frequency period.
-    else if (modeOk) {
-        log.debug("mode OK.  Running again")
-        switches.off()
-    }
-    //if none is ok turn off frequency check and turn off lights.
-    else {
-    	if(people){
-        	//don't turn off lights if anyone is home
-        	if(someoneIsHome()){
-        	    log.debug("Stopping Check for Light")
-        	    unschedule()
-        	}
-        	else{
-        	    log.debug("Stopping Check for Light and turning off all lights")
-        	    switches.off()
-        	    unschedule()
-        	}
+
+    // grab a random switch and turn it on
+    def random_int = random.nextInt(inactive_switches.size())
+    inactive_switches[random_int].on()
+
+    // then remove that switch from the pool off switches that can be turned on
+    inactive_switches.remove(random_int)
+  }
+
+  // re-run again when the frequency demands it
+  runIn(frequency_minutes * 60, scheduleCheck)
+}
+//Check to see if mode is ok but not time/day.  If mode is still ok, check again after frequency period.
+else if (modeOk) {
+	log.debug("mode OK.  Running again")
+	runIn(frequency_minutes * 60, scheduleCheck)
+    switches.off()
+}
+//if none is ok turn off frequency check and turn off lights.
+else if(people){
+    //don't turn off lights if anyone is home
+		if(someoneIsHome()){
+		log.debug("Stopping Check for Light")
     	}
-        else if (!modeOk) {
-        	unschedule()
-        }
+        else{
+    log.debug("Stopping Check for Light and turning off all lights")
+	switches.off()
     }
+}
 }      
 
 
@@ -316,6 +286,26 @@ private getDaysOk() {
 	result
 }
 
+private getTimeOk() {
+	def result = true
+	if (starting && ending) {
+		def currTime = now()
+		def start = timeToday(starting).time
+		def stop = timeToday(ending).time
+		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
+	}
+    
+    else if (starting){
+    	result = currTime >= start
+    }
+    else if (ending){
+    	result = currTime <= stop
+    }
+    
+	log.trace "timeOk = $result"
+	result
+}
+
 private getHomeIsEmpty() {
   def result = true
 
@@ -340,59 +330,25 @@ private getSomeoneIsHome() {
   return result
 }
 
-private getTimeOk() {
-	def result = true
-	def start = timeWindowStart()
-	def stop = timeWindowStop()
-	if (start && stop && location.timeZone) {
-		result = timeOfDayIsBetween(start, stop, new Date(), location.timeZone)
-	}
-	log.trace "timeOk = $result"
-	result
-}
-
-private timeWindowStart() {
-	def result = null
-	if (startTimeType == "sunrise") {
-		result = location.currentState("sunriseTime")?.dateValue
-		if (result && startTimeOffset) {
-			result = new Date(result.time + Math.round(startTimeOffset * 60000))
-		}
-	}
-	else if (startTimeType == "sunset") {
-		result = location.currentState("sunsetTime")?.dateValue
-		if (result && startTimeOffset) {
-			result = new Date(result.time + Math.round(startTimeOffset * 60000))
-		}
-	}
-	else if (starting && location.timeZone) {
-		result = timeToday(starting, location.timeZone)
-	}
-	log.trace "timeWindowStart = ${result}"
-	result
-}
-
-private timeWindowStop() {
-	def result = null
-	if (endTimeType == "sunrise") {
-		result = location.currentState("sunriseTime")?.dateValue
-		if (result && endTimeOffset) {
-			result = new Date(result.time + Math.round(endTimeOffset * 60000))
-		}
-	}
-	else if (endTimeType == "sunset") {
-		result = location.currentState("sunsetTime")?.dateValue
-		if (result && endTimeOffset) {
-			result = new Date(result.time + Math.round(endTimeOffset * 60000))
-		}
-	}
-	else if (ending && location.timeZone) {
-		result = timeToday(ending, location.timeZone)
-	}
-	log.trace "timeWindowStop = ${result}"
-	result
+
+//gets the label for time restriction. Label phrasing changes depending on if there is both start and stop times or just one start/stop time.
+def getTimeLabel(starting, ending){
+
+	def timeLabel = "Tap to set"
+	
+    if(starting && ending){
+    	timeLabel = "Between" + " " + hhmm(starting) + " "  + "and" + " " +  hhmm(ending)
+    }
+    else if (starting) {
+		timeLabel = "Start at" + " " + hhmm(starting)
+    }
+    else if(ending){
+    timeLabel = "End at" + hhmm(ending)
+    }
+	timeLabel
 }
 
+//fomrats time to readable format for time label
 private hhmm(time, fmt = "h:mm a")
 {
 	def t = timeToday(time, location.timeZone)
@@ -401,41 +357,6 @@ private hhmm(time, fmt = "h:mm a")
 	f.format(t)
 }
 
-private timeIntervalLabel() {
-	def start = ""
-	switch (startTimeType) {
-		case "time":
-			if (ending) {
-            	start += hhmm(starting)
-            }
-			break
-		case "sunrise":
-		case "sunset":
-        	start += startTimeType[0].toUpperCase() + startTimeType[1..-1]
-			if (startTimeOffset) {
-				start += startTimeOffset > 0 ? "+${startTimeOffset} min" : "${startTimeOffset} min"
-			}
-			break
-	}
-
-    def finish = ""
-	switch (endTimeType) {
-		case "time":
-			if (ending) {
-            	finish += hhmm(ending)
-            }
-			break
-		case "sunrise":
-		case "sunset":
-        	finish += endTimeType[0].toUpperCase() + endTimeType[1..-1]
-			if (endTimeOffset) {
-				finish += endTimeOffset > 0 ? "+${endTimeOffset} min" : "${endTimeOffset} min"
-			}
-			break
-	}
-	start && finish ? "${start} to ${finish}" : ""
-}
-
 //sets complete/not complete for the setup section on the main dynamic page
 def greyedOut(){
 	def result = ""
@@ -448,7 +369,16 @@ def greyedOut(){
 //sets complete/not complete for the settings section on the main dynamic page
 def greyedOutSettings(){
 	def result = ""
-    if (people || days || falseAlarmThreshold ) {
+    if (starting || ending || days || falseAlarmThreshold) {
+    	result = "complete"	
+    }
+    result
+}
+
+//sets complete/not complete for time restriction section in settings
+def greyedOutTime(starting, ending){
+	def result = ""
+    if (starting || ending) {
     	result = "complete"	
     }
     result