MSA-1006: based on https://github.com/SmartThingsCommunity/SmartThingsPublic/blob/master/devicetypes/smartthings/aeon-home-energy-meter.src/aeon-home-energy-meter.groovy

with additional product info and configuration

devicetypes/smartthings/aeon-home-energy-meter.src/aeon-home-energy-meter.groovy

@@ -23,6 +23,11 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 
+	        attribute "ManufacturerCode", "string"
+		attribute "ProductCode", "string"
+		attribute "ProduceTypeCode", "string"
+		attribute "WirelessConfig", "string"
+
 		command "reset"
 
 		fingerprint deviceId: "0x2101", inClusters: " 0x70,0x31,0x72,0x86,0x32,0x80,0x85,0x60"
@@ -109,10 +114,28 @@ def configure() {
 		zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 4).format(),   // combined power in watts
 		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 300).format(), // every 5 min
 		zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 8).format(),   // combined energy in kWh
-		zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 300).format(), // every 5 min
+		zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 1200).format(), // every 20 min
 		zwave.configurationV1.configurationSet(parameterNumber: 103, size: 4, scaledConfigurationValue: 0).format(),    // no third report
 		zwave.configurationV1.configurationSet(parameterNumber: 113, size: 4, scaledConfigurationValue: 300).format() // every 5 min
 	])
 	log.debug cmd
 	cmd
 }
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+
+	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
+	def productCode = String.format("%04X", cmd.productId)
+	def produceTypeCode = String.format("%04X", cmd.productTypeId)
+	def wirelessConfig = "ZWA"
+	
+	sendEvent(name: "ManufacturerCode", value: manufacturerCode)
+	sendEvent(name: "ProductCode", value: productCode)
+	sendEvent(name: "ProduceTypeCode", value: produceTypeCode)
+	sendEvent(name: "WirelessConfig", value: wirelessConfig)
+	
+	result << createEvent(descriptionText: "$device.displayName", isStateChange: false)
+
+	return result
+}

devicetypes/smartthings/smartpower-outlet.src/i18n/messages.properties

@@ -28,8 +28,4 @@
 '''{{ device.displayName }} is On'''.ko={{ device.displayName }}켜졌습니다.
 '''{{ device.displayName }} is Off'''.ko={{ device.displayName }}꺼졌습니다.
 '''{{ device.displayName }} power is {{ value }} Watts'''.ko={{ device.displayName }} 전원은 {{ value }}와트입니다
-'''On'''.ko=켜기
-'''Off'''.ko=끄기
-'''Turning On'''.ko=켜기
-'''Turning Off'''.ko=끄기
 #==============================================================================

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -65,10 +65,10 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: 'On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
-				attributeState "off", label: 'Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
-				attributeState "turningOn", label: 'Turning On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
-				attributeState "turningOff", label: 'Turning Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
 			}
 			tileAttribute ("power", key: "SECONDARY_CONTROL") {
 				attributeState "power", label:'${currentValue} W'

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -43,7 +43,3 @@
 '''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
 '''Updating device to garage sensor'''.ko=기기-차고 센서 업데이트 중
 '''Updating device to open/close sensor'''.ko=기기-열림/닫힘 센서 업데이트 중
-'''Inactive'''.ko=비활성
-'''Active'''.ko=활성
-'''Open'''.ko=열다
-'''Closed'''.ko=닫은

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -83,19 +83,19 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
 				attributeState "garage-open", label:'Open', icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e"
 				attributeState "garage-closed", label:'Closed', icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821"
 			}
 		}
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-			state("closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label:'Active', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'Inactive', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
+			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°',

smartapps/tslagle13/vacation-lighting-director.src/vacation-lighting-director.groovy

@@ -40,7 +40,6 @@ preferences {
     page name:"pageSetup"
     page name:"Setup"
     page name:"Settings"
-    page name: "timeIntervalInput"
 
 }
 
@@ -186,8 +185,7 @@ def Settings() {
     }   
 }
 
-def timeIntervalInput() {
-	dynamicPage(name: "timeIntervalInput") {
+page(name: "timeIntervalInput", title: "Only during a certain time", refreshAfterSelection:true) {
 		section {
 			input "startTimeType", "enum", title: "Starting at", options: [["time": "A specific time"], ["sunrise": "Sunrise"], ["sunset": "Sunset"]], defaultValue: "time", submitOnChange: true
 			if (startTimeType in ["sunrise","sunset"]) {
@@ -206,10 +204,9 @@ def timeIntervalInput() {
 				input "ending", "time", title: "End time", required: false
 			}
 		}
-	}
+        
 }
 
-
 def installed() {
 initialize()
 }