MSA-931: This is test

build.gradle

@@ -1,18 +1,15 @@
 import java.nio.charset.StandardCharsets
 import java.nio.file.Paths
-import com.smartthings.deployment.slack.FileUpload
-import com.smartthings.deployment.slack.Message
 
 apply plugin: 'groovy'
 apply plugin: 'smartthings-executable-deployment'
-apply plugin: 'smartthings-slack'
+apply plugin: 'smartthings-hipchat'
 
 buildscript {
     dependencies {
-        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.8"
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.3"
     }
     repositories {
-        mavenLocal()
         jcenter()
         maven {
             credentials {
@@ -32,43 +29,7 @@ repositories {
 dependencies {
 }
 
-slackSendMessage {
-    String branch = project.hasProperty('branch') ? project.property('branch') : 'unknown'
-    String token = project.hasProperty('slackToken') ? project.property('slackToken') : null
-    String webhookUrl = project.hasProperty('slackWebhookUrl') ? project.property('slackWebhookUrl') : null
-    String channel = project.hasProperty('slackChannel') ? project.property('slackChannel') : null
-    String drinks = 'https://dl.dropboxusercontent.com/s/m1z5mpd3c83lwev/minion_beer.jpeg?dl=0'
-    String wolverine = 'https://dl.dropboxusercontent.com/s/4lbjqzvm2v033u9/minion_wolverine.jpg?dl=0'
-    String beach = 'https://dl.dropboxusercontent.com/s/rqrfgxk53gfng69/minion_beach.png?dl=0'
-    String iconUrl
-    String color
-    String messageText
-    String username
-    switch (branch) {
-        case 'master':
-            username = 'Hickory'
-            iconUrl = wolverine
-            color = '#35D0F2'
-            messageText = 'Began deployment of _SmartThingsPublic[master]_ branch to the _Dev_ environments.'
-            break
-        case 'staging':
-            username = 'Dickory'
-            iconUrl = beach
-            color = '#FFDE20'
-            messageText = 'Began deployment of _SmartThingsPublic[staging]_ branch to the _Staging_ environments.'
-            break
-        case 'production':
-            username = 'Dock'
-            iconUrl = drinks
-            color = '#FF1D23'
-            messageText = 'Began deployment of _SmartThingsPublic[production]_ branch to the _Prod_ environments.'
-            break
-        default:
-            username = 'Hickory'
-            iconUrl = wolverine
-            color = '#35D0F2'
-            messageText = "Began deployment of an _SmartThingsPublic[${branch}]_ branch.  Have no idea what's going on."
-    }
+hipchatShareFile {
     List<String> archives = []
     File rootDir = new File("${project.buildDir}/archives")
     if (rootDir.exists()) {
@@ -81,25 +42,16 @@ slackSendMessage {
             }
         }
     }
-    Date date = new Date()
-    String fileDate = date.format('yyyy-MM-dd_HH-mm-ss', TimeZone.getTimeZone('GMT'))
 
-    // Required Task Arguments.
-    file = new FileUpload(
-        data: archives.join('\n').getBytes(StandardCharsets.UTF_8),
-        filename: "deployment-notes-${fileDate}.txt",
-        title: 'Deployment Notes',
-        channels: channel,
-        token: token,
-        color: color
-    )
-    message = new Message(
-        webhookUrl: webhookUrl,
-        username: username,
-        asUser: true,
-        iconUrl: iconUrl,
-        channel: channel,
-        fallback: 'Deployment Notification',
-        text: messageText
-    )
+    // Set task properties
+    data = archives.join('\n').getBytes(StandardCharsets.UTF_8)
+    fileName = 'deployment-notes.txt'
+    contentType = 'text/html'
+}
+
+hipchatSendNotification {
+    String branch = project.hasProperty('branch') ? project.property('branch') : 'unknown'
+    message = "Began executable deploy of SmartThingsPublic(${branch})."
+    color = branch == 'master' ? 'yellow' : 'red'
+    notify = true
 }

circle.yml

@@ -15,11 +15,13 @@ deployment:
   develop:
     branch: master
     commands:
-      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Ps3Buckets="$S3_BUCKETS_DEV"
-      - ./gradlew slackSendMessage -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Pbranch="$CIRCLE_BRANCH" -PslackToken="$SLACK_TOKEN" -PslackWebhookUrl="$SLACK_WEBHOOK_URL" -PslackChannel="$SLACK_CHANNEL" --stacktrace
+      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD -Ps3BucketName=$S3_BUCKET_NAME_PREPROD_DEV
+      - ./gradlew hipchatSendNotification -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD -Pbranch=$CIRCLE_BRANCH
+      - ./gradlew hipchatShareFile -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD
 
   stage:
     branch: staging
     commands:
-      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Ps3Buckets="$S3_BUCKETS_STAGE"
-      - ./gradlew slackSendMessage -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Pbranch="$CIRCLE_BRANCH" -PslackToken="$SLACK_TOKEN" -PslackWebhookUrl="$SLACK_WEBHOOK_URL" -PslackChannel="$SLACK_CHANNEL" --stacktrace
+      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD -Ps3BucketName=$S3_BUCKET_NAME_PREPROD_STAGING
+      - ./gradlew hipchatSendNotification -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD -Pbranch=$CIRCLE_BRANCH
+      - ./gradlew hipchatShareFile -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD

devicetypes/com-obycode/beaconthing.src/beaconthing.groovy

@@ -1,107 +0,0 @@
-/**
-*  BeaconThing
-*
-*  Copyright 2015 obycode
-*
-*  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
-*  in compliance with the License. You may obtain a copy of the License at:
-*
-*      http://www.apache.org/licenses/LICENSE-2.0
-*
-*  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
-*  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
-*  for the specific language governing permissions and limitations under the License.
-*
-*/
-
-import groovy.json.JsonSlurper
-
-metadata {
-	definition (name: "BeaconThing", namespace: "com.obycode", author: "obycode") {
-		capability "Beacon"
-		capability "Presence Sensor"
-		capability "Sensor"
-
-		attribute "inRange", "json_object"
-		attribute "inRangeFriendly", "string"
-
-		command "setPresence", ["string"]
-		command "arrived", ["string"]
-		command "left", ["string"]
-	}
-
-	simulator {
-		status "present": "presence: 1"
-		status "not present": "presence: 0"
-	}
-
-	tiles {
-		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-			state("present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0")
-			state("not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff")
-		}
-		valueTile("inRange", "device.inRangeFriendly", inactiveLabel: true, height:1, width:3, decoration: "flat") {
-			state "default", label:'${currentValue}', backgroundColor:"#ffffff"
-		}
-		main "presence"
-		details (["presence","inRange"])
-	}
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"
-}
-
-def installed() {
-	sendEvent(name: "presence", value: "not present")
-	def emptyList = []
-	def json = new groovy.json.JsonBuilder(emptyList)
-	sendEvent(name:"inRange", value:json.toString())
-}
-
-def setPresence(status) {
-	log.debug "Status is $status"
-	sendEvent(name:"presence", value:status)
-}
-
-def arrived(id) {
-	log.debug "$id has arrived"
-	def theList = device.latestValue("inRange")
-	def inRangeList = new JsonSlurper().parseText(theList)
-	if (inRangeList.contains(id)) {
-		return
-	}
-	inRangeList += id
-	def json = new groovy.json.JsonBuilder(inRangeList)
-	log.debug "Now in range: ${json.toString()}"
-	sendEvent(name:"inRange", value:json.toString())
-
-	// Generate human friendly string for tile
-	def friendlyList = "Nearby: " + inRangeList.join(", ")
-	sendEvent(name:"inRangeFriendly", value:friendlyList)
-
-	if (inRangeList.size() == 1) {
-		setPresence("present")
-	}
-}
-
-def left(id) {
-	log.debug "$id has left"
-	def theList = device.latestValue("inRange")
-	def inRangeList = new JsonSlurper().parseText(theList)
-	inRangeList -= id
-	def json = new groovy.json.JsonBuilder(inRangeList)
-	log.debug "Now in range: ${json.toString()}"
-	sendEvent(name:"inRange", value:json.toString())
-
-	// Generate human friendly string for tile
-	def friendlyList = "Nearby: " + inRangeList.join(", ")
-
-	if (inRangeList.empty) {
-		setPresence("not present")
-		friendlyList = "No one is nearby"
-	}
-
-	sendEvent(name:"inRangeFriendly", value:friendlyList)
-}

devicetypes/fibargroup/fibaro-door-window-sensor-zw5-with-temperature.src/fibaro-door-window-sensor-zw5-with-temperature.groovy

@@ -1,272 +0,0 @@
-/**
- *  Fibaro Door/Window Sensor ZW5
- *
- *  Copyright 2016 Fibar Group S.A.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.") {
-		capability "Battery"
-		capability "Contact Sensor"
-		capability "Sensor"
-        capability "Configuration"
-        capability "Tamper Alert"
-        
-        capability "Temperature Measurement"
-
-		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x31, 0x86", outClusters: ""
-        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x31, 0x86, 0x84", outClusters: ""//actual NIF
-	}
-
-	simulator {
-		
-	}
-    
-    tiles(scale: 2) {
-    	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
-        	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
-            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#79b821")
-            }
-            
-            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
-			}  
-        }
-                
-        valueTile("battery", "device.battery", inactiveLabel: false, , width: 2, height: 2, decoration: "flat") {
-            state "battery", label:'${currentValue}% battery', unit:""
-        }
-        
-        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
-			backgroundColors:[
-				[value: 31, color: "#153591"],
-				[value: 44, color: "#1e9cbb"],
-				[value: 59, color: "#90d2a7"],
-				[value: 74, color: "#44b621"],
-				[value: 84, color: "#f1d801"],
-				[value: 95, color: "#d04e00"],
-				[value: 96, color: "#bc2323"]
-			]
-		}
-        
-        main "FGK"
-        details(["FGK","battery", "temperature"])
-    }
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"   
-    def result = []
-    
-    if (description.startsWith("Err 106")) {
-		if (state.sec) {
-			result = createEvent(descriptionText:description, displayed:false)
-		} else {
-			result = createEvent(
-				descriptionText: "FGK failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
-				eventType: "ALERT",
-				name: "secureInclusion",
-				value: "failed",
-				displayed: true,
-			)
-		}
-	} else if (description == "updated") {
-		return null
-	} else {
-    	def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
-    
-    	if (cmd) {
-    		log.debug "Parsed '${cmd}'"
-        	zwaveEvent(cmd)
-    	}
-    }
-}
-
-//security
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x98: 1])
-	if (encapsulatedCommand) {
-		return zwaveEvent(encapsulatedCommand)
-	} else {
-		log.warn "Unable to extract encapsulated cmd from $cmd"
-		createEvent(descriptionText: cmd.toString())
-	}
-}
-
-//crc16
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
-{
-    def versions = [0x31: 5, 0x72: 2, 0x80: 1, 0x86: 1]
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (!encapsulatedCommand) {
-		log.debug "Could not extract command from $cmd"
-	} else {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
-	//it is assumed that default notification events are used
-    //(parameter 20 was not changed before device's re-inclusion)
-    def map = [:]
-    if (cmd.notificationType == 6) {
-    	switch (cmd.event) {                
-        	case 22:
-            	map.name = "contact"
-                map.value = "open"
-                map.descriptionText = "${device.displayName}: is open"
-            	break
-                
-            case 23:
-            	map.name = "contact"
-                map.value = "closed"
-                map.descriptionText = "${device.displayName}: is closed"
-            	break
-        }
-    } else if (cmd.notificationType == 7) {
-    	switch (cmd.event) {
-        	case 0:
-            	map.name = "tamper"
-                map.value = "inactive"
-                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
-				break
-                
-        	case 3:
-            	map.name = "tamper"
-                map.value = "active"
-                map.descriptionText = "${device.displayName}: tamper alarm activated"
-            	break
-        }
-    }
-    
-    createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [:]
-	map.name = "battery"
-	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
-	map.unit = "%"
-	map.displayed = true
-	createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {    
-    def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
-    def cmds = []
-    cmds << encap(zwave.batteryV1.batteryGet())
-    cmds << "delay 500"
-    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
-    cmds << "delay 1200"
-    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
-    [event, response(cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
-	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-    log.debug "manufacturerName: ${cmd.manufacturerName}"
-    log.debug "productId:        ${cmd.productId}"
-    log.debug "productTypeId:    ${cmd.productTypeId}"
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
-	log.debug "deviceIdData:                ${cmd.deviceIdData}"
-    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
-    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
-    log.debug "deviceIdType:                ${cmd.deviceIdType}"
-    
-    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
-		String serialNumber = "h'"
-        
-        cmd.deviceIdData.each{ data ->
-        	serialNumber += "${String.format("%02X", data)}"
-        }
-        
-        updateDataValue("serialNumber", serialNumber)
-        log.debug "${device.displayName} - serial number: ${serialNumber}"
-    }
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
-    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
-    log.debug "applicationVersion:      ${cmd.applicationVersion}"
-    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
-    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
-    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
-    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
-	def map = [:]
-	if (cmd.sensorType == 1) {
-        // temperature
-        def cmdScale = cmd.scale == 1 ? "F" : "C"
-        map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
-        map.unit = getTemperatureScale()
-        map.name = "temperature"
-        map.displayed = true
-	}
-	
-    createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
-	log.info "${device.displayName}: received command: $cmd - device has reset itself"
-}
-
-def configure() {
-	log.debug "Executing 'configure'"
-    
-    def cmds = []
-        
-    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval
-    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
-    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
-    cmds += zwave.versionV1.versionGet()
-    cmds += zwave.batteryV1.batteryGet()
-    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
-    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
-    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
-    
-    encapSequence(cmds, 500)
-}
-
-private secure(physicalgraph.zwave.Command cmd) {
-	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-}
-
-private crc16(physicalgraph.zwave.Command cmd) {
-	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
-    "5601${cmd.format()}0000"
-}
-
-private encapSequence(commands, delay=200) {
-	delayBetween(commands.collect{ encap(it) }, delay)
-}
-
-private encap(physicalgraph.zwave.Command cmd) {
-    def secureClasses = [0x20, 0x2B, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
-    
-    //todo: check if secure inclusion was successful
-    //if not do not send security-encapsulated command
-	if (secureClasses.find{ it == cmd.commandClassId }) {
-    	secure(cmd)
-    } else {
-    	crc16(cmd)
-    }
-}

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -1,239 +0,0 @@
-/**
- *  Fibaro Door/Window Sensor ZW5
- *
- *  Copyright 2016 Fibar Group S.A.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
-		capability "Battery"
-		capability "Contact Sensor"
-		capability "Sensor"
-        capability "Configuration"
-        capability "Tamper Alert"
-
-        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x86, 0x84", outClusters: ""
-	}
-
-	simulator {
-		
-	}
-        
-    tiles(scale: 2) {
-    	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
-        	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
-            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#79b821")
-            }
-            
-            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
-			}  
-        }
-                
-        valueTile("battery", "device.battery", inactiveLabel: false, , width: 2, height: 2, decoration: "flat") {
-            state "battery", label:'${currentValue}% battery', unit:""
-        }
-        
-        main "FGK"
-        details(["FGK","battery"])
-    }
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"   
-    def result = []
-    
-    if (description.startsWith("Err 106")) {
-		if (state.sec) {
-			result = createEvent(descriptionText:description, displayed:false)
-		} else {
-			result = createEvent(
-				descriptionText: "FGK failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
-				eventType: "ALERT",
-				name: "secureInclusion",
-				value: "failed",
-				displayed: true,
-			)
-		}
-	} else if (description == "updated") {
-		return null
-	} else {
-    	def cmd = zwave.parse(description, [0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
-    
-    	if (cmd) {
-    		log.debug "Parsed '${cmd}'"
-        	zwaveEvent(cmd)
-    	}
-    }
-}
-
-//security
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x98: 1])
-	if (encapsulatedCommand) {
-		return zwaveEvent(encapsulatedCommand)
-	} else {
-		log.warn "Unable to extract encapsulated cmd from $cmd"
-		createEvent(descriptionText: cmd.toString())
-	}
-}
-
-//crc16
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
-{
-    def versions = [0x72: 2, 0x80: 1, 0x86: 1]
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (!encapsulatedCommand) {
-		log.debug "Could not extract command from $cmd"
-	} else {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
-	//it is assumed that default notification events are used
-    //(parameter 20 was not changed before device's re-inclusion)
-    def map = [:]
-    if (cmd.notificationType == 6) {
-    	switch (cmd.event) {                
-        	case 22:
-            	map.name = "contact"
-                map.value = "open"
-                map.descriptionText = "${device.displayName}: is open"
-            	break
-                
-            case 23:
-            	map.name = "contact"
-                map.value = "closed"
-                map.descriptionText = "${device.displayName}: is closed"
-            	break
-        }
-    } else if (cmd.notificationType == 7) {
-    	switch (cmd.event) {
-        	case 0:
-            	map.name = "tamper"
-                map.value = "inactive"
-                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
-				break
-                
-        	case 3:
-            	map.name = "tamper"
-                map.value = "active"
-                map.descriptionText = "${device.displayName}: tamper alarm activated"
-            	break
-        }
-    }
-    
-    createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [:]
-	map.name = "battery"
-	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
-	map.unit = "%"
-	map.displayed = true
-	createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {    
-    def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
-    def cmds = []
-    cmds << encap(zwave.batteryV1.batteryGet())
-    cmds << "delay 1200"
-    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
-    [event, response(cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
-	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-    log.debug "manufacturerName: ${cmd.manufacturerName}"
-    log.debug "productId:        ${cmd.productId}"
-    log.debug "productTypeId:    ${cmd.productTypeId}"
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
-	log.debug "deviceIdData:                ${cmd.deviceIdData}"
-    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
-    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
-    log.debug "deviceIdType:                ${cmd.deviceIdType}"
-    
-    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
-		String serialNumber = "h'"
-        
-        cmd.deviceIdData.each{ data ->
-        	serialNumber += "${String.format("%02X", data)}"
-        }
-        
-        updateDataValue("serialNumber", serialNumber)
-        log.debug "${device.displayName} - serial number: ${serialNumber}"
-    }
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
-    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
-    log.debug "applicationVersion:      ${cmd.applicationVersion}"
-    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
-    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
-    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
-    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
-	log.info "${device.displayName}: received command: $cmd - device has reset itself"
-}
-
-def configure() {
-	log.debug "Executing 'configure'"
-    
-    def cmds = []
-    
-    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval
-    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
-    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
-    cmds += zwave.versionV1.versionGet()
-    cmds += zwave.batteryV1.batteryGet()
-    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
-    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
-    
-    encapSequence(cmds, 500)
-}
-
-private secure(physicalgraph.zwave.Command cmd) {
-	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-}
-
-private crc16(physicalgraph.zwave.Command cmd) {
-	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
-    "5601${cmd.format()}0000"
-}
-
-private encapSequence(commands, delay=200) {
-	delayBetween(commands.collect{ encap(it) }, delay)
-}
-
-private encap(physicalgraph.zwave.Command cmd) {
-    def secureClasses = [0x20, 0x2B, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
-    
-    //todo: check if secure inclusion was successful
-    //if not do not send security-encapsulated command
-	if (secureClasses.find{ it == cmd.commandClassId }) {
-    	secure(cmd)
-    } else {
-    	crc16(cmd)
-    }
-}

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -1,269 +0,0 @@
-/**
- *  Fibaro Flood Sensor ZW5
- *
- *  Copyright 2016 Fibar Group S.A.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
-		capability "Battery"
-		capability "Configuration"
-		capability "Sensor"
-		capability "Tamper Alert"
-		capability "Temperature Measurement"
-		capability "Water Sensor"
-        
-        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
-	}
-
-	simulator {
-    
-	}
-    
-    tiles(scale: 2) {
-    	multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
-        	tileAttribute("device.water", key:"PRIMARY_CONTROL") {
-            	attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#79b821")
-            	attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#ffa81e")
-            }
-            
-            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
-			}       
-        }
-        
-        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
-			backgroundColors:[
-				[value: 31, color: "#153591"],
-				[value: 44, color: "#1e9cbb"],
-				[value: 59, color: "#90d2a7"],
-				[value: 74, color: "#44b621"],
-				[value: 84, color: "#f1d801"],
-				[value: 95, color: "#d04e00"],
-				[value: 96, color: "#bc2323"]
-			]
-		}
-       	        
-        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-        	state "battery", label:'${currentValue}% battery', unit:""
-        }
-        
-        main "FGFS"
-        details(["FGFS","battery", "temperature"])
-    }
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"
-	def result = []
-    
-    if (description.startsWith("Err 106")) {
-		if (state.sec) {
-			result = createEvent(descriptionText:description, displayed:false)
-		} else {
-			result = createEvent(
-				descriptionText: "FGFS failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
-				eventType: "ALERT",
-				name: "secureInclusion",
-				value: "failed",
-				displayed: true,
-			)
-		}
-	} else if (description == "updated") {
-		return null
-	} else {
-        def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72:2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
-
-        if (cmd) {
-            log.debug "Parsed '${cmd}'"
-            zwaveEvent(cmd)
-        }
-    }
-}
-
-//security
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
-	if (encapsulatedCommand) {
-		return zwaveEvent(encapsulatedCommand)
-	} else {
-		log.warn "Unable to extract encapsulated cmd from $cmd"
-		createEvent(descriptionText: cmd.toString())
-	}
-}
-
-//crc16
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
-{
-    def versions = [0x31: 5, 0x72: 2, 0x80: 1]
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (!encapsulatedCommand) {
-		log.debug "Could not extract command from $cmd"
-	} else {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
-{
-	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
-    def cmds = []
-    cmds << encap(zwave.batteryV1.batteryGet())
-    cmds << "delay 500"
-    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))    
-    cmds << "delay 1200"
-    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
-    [event, response(cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
-	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-    log.debug "manufacturerName: ${cmd.manufacturerName}"
-    log.debug "productId:        ${cmd.productId}"
-    log.debug "productTypeId:    ${cmd.productTypeId}"
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
-	log.debug "deviceIdData:                ${cmd.deviceIdData}"
-    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
-    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
-    log.debug "deviceIdType:                ${cmd.deviceIdType}"
-    
-    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
-		String serialNumber = "h'"
-        
-        cmd.deviceIdData.each{ data ->
-        	serialNumber += "${String.format("%02X", data)}"
-        }
-        
-        updateDataValue("serialNumber", serialNumber)
-        log.debug "${device.displayName} - serial number: ${serialNumber}"
-    }
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
-    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
-    log.debug "applicationVersion:      ${cmd.applicationVersion}"
-    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
-    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
-    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
-    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [:]
-	map.name = "battery"
-	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
-	map.unit = "%"
-	map.displayed = true
-	createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
-	def map = [:]
-    if (cmd.notificationType == 5) {
-    	switch (cmd.event) {                
-        	case 2:
-            	map.name = "water"
-                map.value = "wet"
-                map.descriptionText = "${device.displayName} is ${map.value}"
-            	break
-                
-            case 0:
-            	map.name = "water"
-                map.value = "dry"
-                map.descriptionText = "${device.displayName} is ${map.value}"
-            	break
-        }
-    } else if (cmd.notificationType == 7) {
-    	switch (cmd.event) {
-        	case 0:
-            	map.name = "tamper"
-                map.value = "inactive"
-                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
-				break
-                
-        	case 3:
-            	map.name = "tamper"
-                map.value = "active"
-                map.descriptionText = "${device.displayName}: tamper alarm activated"
-            	break
-        }
-    }
-    
-    createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
-	def map = [:]
-	if (cmd.sensorType == 1) {
-        // temperature
-        def cmdScale = cmd.scale == 1 ? "F" : "C"
-        map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
-        map.unit = getTemperatureScale()
-        map.name = "temperature"
-        map.displayed = true
-	}
-	
-    createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
-	log.info "${device.displayName}: received command: $cmd - device has reset itself"
-}
-
-def configure() {
-	log.debug "Executing 'configure'"
-	
-    def cmds = []
-    
-	cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGFS' default wake up interval
-    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
-    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
-    cmds += zwave.versionV1.versionGet()
-    cmds += zwave.batteryV1.batteryGet()
-    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
-    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
-    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
-
-	encapSequence(cmds, 500)
-}
-
-private secure(physicalgraph.zwave.Command cmd) {
-	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-}
-
-private crc16(physicalgraph.zwave.Command cmd) {
-	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
-    "5601${cmd.format()}0000"
-}
-
-private encapSequence(commands, delay=200) {
-	delayBetween(commands.collect{ encap(it) }, delay)
-}
-
-private encap(physicalgraph.zwave.Command cmd) {
-	def secureClasses = [0x20, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
-
-	//todo: check if secure inclusion was successful
-    //if not do not send security-encapsulated command
-	if (secureClasses.find{ it == cmd.commandClassId }) {
-    	secure(cmd)
-    } else {
-    	crc16(cmd)
-    }
-}

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -1,281 +0,0 @@
-/**
- *  Fibaro Motion Sensor ZW5
- *
- *  Copyright 2016 Fibar Group S.A.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
-		capability "Battery"
-		capability "Configuration"
-		capability "Illuminance Measurement"
-		capability "Motion Sensor"
-		capability "Sensor"
-		capability "Tamper Alert"
-		capability "Temperature Measurement"
-        
-        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x30, 0x9C, 0x98, 0x7A", outClusters: ""
-	}
-    
-	simulator {
-		
-    }
-    
-    tiles(scale: 2) {
-    	multiAttributeTile(name:"FGMS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
-        	tileAttribute("device.motion", key:"PRIMARY_CONTROL") {
-            	attributeState("inactive", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
-            	attributeState("active", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")   
-            }
-            
-            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
-			}  
-        }
-        
-        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
-			backgroundColors:[
-				[value: 31, color: "#153591"],
-				[value: 44, color: "#1e9cbb"],
-				[value: 59, color: "#90d2a7"],
-				[value: 74, color: "#44b621"],
-				[value: 84, color: "#f1d801"],
-				[value: 95, color: "#d04e00"],
-				[value: 96, color: "#bc2323"]
-			]
-		}
-        
-        valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
-		}
-        
-        valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
-            state "battery", label:'${currentValue}% battery', unit:""
-        }
-        
-        main "FGMS"
-        details(["FGMS","battery","temperature","illuminance"])
-    }
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"        
-    def result = []
-    
-    if (description.startsWith("Err 106")) {
-		if (state.sec) {
-			result = createEvent(descriptionText:description, displayed:false)
-		} else {
-			result = createEvent(
-				descriptionText: "FGK failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
-				eventType: "ALERT",
-				name: "secureInclusion",
-				value: "failed",
-				displayed: true,
-			)
-		}
-	} else if (description == "updated") {
-		return null
-	} else {
-    	def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
-    
-    	if (cmd) {
-    		log.debug "Parsed '${cmd}'"
-        	zwaveEvent(cmd)
-    	}
-    }
-}
-
-//security
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
-	if (encapsulatedCommand) {
-		return zwaveEvent(encapsulatedCommand)
-	} else {
-		log.warn "Unable to extract encapsulated cmd from $cmd"
-		createEvent(descriptionText: cmd.toString())
-	}
-}
-
-//crc16
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
-{
-    def versions = [0x31: 5, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1]
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (!encapsulatedCommand) {
-		log.debug "Could not extract command from $cmd"
-	} else {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
-	def map = [ displayed: true ]
-    switch (cmd.sensorType) {
-    	case 1:
-        	map.name = "temperature"
-            map.unit = cmd.scale == 1 ? "F" : "C"
-            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, map.unit, cmd.precision)
-            break
-    	case 3:
-        	map.name = "illuminance"
-            map.value = cmd.scaledSensorValue.toInteger().toString()
-            map.unit = "lux"
-            break
-    }
-
-	createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
-	def map = [:]
-    if (cmd.notificationType == 7) {
-    	switch (cmd.event) {
-        	case 0:
-            	if (cmd.eventParameter[0] == 3) {
-            		map.name = "tamper"
-                    map.value = "inactive"
-                    map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
-            	}
-            	if (cmd.eventParameter[0] == 8) {
-                	map.name = "motion"
-                    map.value = "inactive"
-                    map.descriptionText = "${device.displayName}: motion has stopped"
-                }
-        		break
-                
-        	case 3:
-            	map.name = "tamper"
-                map.value = "active"
-                map.descriptionText = "${device.displayName}: tamper alarm activated"
-            	break
-                
-            case 8:
-                map.name = "motion"
-                map.value = "active"
-                map.descriptionText = "${device.displayName}: motion detected"
-                break
-        }
-    }
-    
-    createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [:]
-	map.name = "battery"
-	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
-	map.unit = "%"
-	map.displayed = true
-	createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
-{
-	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
-    def cmds = []
-    cmds << encap(zwave.batteryV1.batteryGet())
-    cmds << "delay 500"
-    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
-    cmds << "delay 500"
-    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1))     
-    cmds << "delay 1200"
-    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
-    [event, response(cmds)]
-    
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
-	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-    log.debug "manufacturerName: ${cmd.manufacturerName}"
-    log.debug "productId:        ${cmd.productId}"
-    log.debug "productTypeId:    ${cmd.productTypeId}"
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
-	log.debug "deviceIdData:                ${cmd.deviceIdData}"
-    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
-    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
-    log.debug "deviceIdType:                ${cmd.deviceIdType}"
-    
-    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
-		String serialNumber = "h'"
-        
-        cmd.deviceIdData.each{ data ->
-        	serialNumber += "${String.format("%02X", data)}"
-        }
-        
-        updateDataValue("serialNumber", serialNumber)
-        log.debug "${device.displayName} - serial number: ${serialNumber}"
-    }
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
-    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
-    log.debug "applicationVersion:      ${cmd.applicationVersion}"
-    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
-    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
-    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
-    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
-	log.info "${device.displayName}: received command: $cmd - device has reset itself"
-}
-
-def configure() {
-	log.debug "Executing 'configure'"
-    
-    def cmds = []
-    
-    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds: 7200, nodeid: zwaveHubNodeId)//FGMS' default wake up interval
-    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
-    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
-    cmds += zwave.versionV1.versionGet()
-    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId])
-    cmds += zwave.batteryV1.batteryGet()
-    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
-    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1)
-    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
-    
-    encapSequence(cmds, 500)
-}
-
-private secure(physicalgraph.zwave.Command cmd) {
-	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-}
-
-private crc16(physicalgraph.zwave.Command cmd) {
-	//zwave.crc16encapV1.crc16Encap().encapsulate(cmd).format()
-    "5601${cmd.format()}0000"
-}
-
-private encapSequence(commands, delay=200) {
-	delayBetween(commands.collect{ encap(it) }, delay)
-}
-
-private encap(physicalgraph.zwave.Command cmd) {
-	def secureClasses = [0x20, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
-
-	//todo: check if secure inclusion was successful
-    //if not do not send security-encapsulated command
-	if (secureClasses.find{ it == cmd.commandClassId }) {
-    	secure(cmd)
-    } else {
-    	crc16(cmd)
-    }
-}

devicetypes/johnrucker/coopboss-h3vx.src/coopboss-h3vx.groovy

@@ -1,795 +0,0 @@
-/**
- *  CoopBoss H3Vx
- *	02/29/16	Fixed app crash with Android by changing the syntax of default state in tile definition. 
- *				Fixed null value errors during join process.  Added 3 new commands to refresh data.
- *
- *	01/18/16	Masked invalid temperature reporting when TempProbe1 is below 0C
- *				Added setBaseCurrentNE, readBaseCurrentNE, commands as well as baseCurrentNE attribute.  
- *
- *  Copyright 2016 John Rucker
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *  Icon location = http://scripts.3dgo.net/smartthings/icons/
- */
-metadata {
-	definition (name: "CoopBoss H3Vx", namespace: "JohnRucker", author: "John.Rucker@Solar-Current.com") {
-        capability "Refresh"
-        capability "Polling"
-        capability "Sensor"
-        capability "Actuator"
-        capability "Configuration"
-		capability "Temperature Measurement"   
-        capability "Door Control"
-  		capability "Switch"
-        
-        command "closeDoor"
-        command "closeDoorHiI"
-        command "openDoor"
-        command "autoCloseOn"
-        command "autoCloseOff"
-        command "autoOpenOn"
-        command "autoOpenOff"
-        command "setCloseLevelTo"
-        command "setOpenLevelTo" 
-        command "setSensitivityLevel"
-        command "Aux1On"
-        command "Aux1Off"        
-        command "Aux2On"
-        command "Aux2Off" 
-        command "updateTemp1"
-        command "updateTemp2"
-        command "updateSun"
-        command "setNewBaseCurrent"
-        command "setNewPhotoCalibration"
-        command "readNewPhotoCalibration"
-        command "readBaseCurrentNE"
-        command "setBaseCurrentNE"
-        command "updateSensitivity"
-        command "updateCloseLightLevel"
-        command "updateOpenLightLevel"
-
-        attribute "doorState","string"
-        attribute "currentLightLevel","number"
-        attribute "closeLightLevel","number"
-        attribute "openLightLevel","number"
-        attribute "autoCloseEnable","string" 
-        attribute "autoOpenEnable","string"
-        attribute "TempProb1","number"
-        attribute "TempProb2","number"   
-        attribute "dayOrNight","string"
-        attribute "doorSensitivity","number"
-        attribute "doorCurrent","number"  
-        attribute "doorVoltage","number"
-        attribute "Aux1","string"
-        attribute "Aux2","string"
-        attribute "coopStatus","string"
-        attribute "baseDoorCurrent","number"
-        attribute "photoCalibration","number"
-        attribute "baseCurrentNE","string"
-        
-    	fingerprint profileId: "0104", inClusters: "0000,0101,0402", manufacturer: "Solar-Current", model: "Coop Boss"
-    
-	}
-
-	// simulator metadata
-	simulator {
-    }
-    
-    
-	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffsetCoop", "number", title: "Coop Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
-		input "tempOffsetOutside", "number", title: "Outside Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false        
-	}    
-       
-
-	// UI tile definitions
-	tiles(scale: 2){        
-		multiAttributeTile(name:"doorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
-        	{  
-			attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", nextState:"Sent"          
-			attributeState "open", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#0000ff" , nextState:"Sent" 
-			attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e"            
-			attributeState "closed", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#79b821", nextState:"Sent" 
-			attributeState "closing", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e" 
-			attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent" 
-			attributeState "forced close", label: 'forced\rclose', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff8000", nextState:"Sent"   
-			attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent"              
-			attributeState "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
-			} 
-            tileAttribute ("device.coopStatus", key: "SECONDARY_CONTROL") {
-				attributeState "device.coopStatus", label:'${currentValue}'
-			}
-        }
-                     
-		multiAttributeTile(name:"dtlsDoorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
-        	{
-      		attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.secondary.tools", nextState:"Sent"
-      		attributeState "open", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-open", backgroundColor: "#0000ff", nextState:"Sent"
-            attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-opening", backgroundColor: "#ffa81e" 
-            attributeState "closed", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closed", backgroundColor: "#79b821", nextState:"Sent"
-            attributeState "closing", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closing", backgroundColor: "#ffa81e" 
-            attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.doors.garage.garage-open", backgroundColor: "#ff0000", nextState:"Sent"
-            attributeState "forced close", label: "forced", action:"openDoor", icon: "st.doors.garage.garage-closed", backgroundColor: "#ff8000", nextState:"Sent"
-            attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.secondary.tools", backgroundColor: "#ff0000", nextState:"Sent"  
-            attributeState "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"
-            } 
-            tileAttribute ("device.doorState", key: "SECONDARY_CONTROL") {
-				attributeState "unknown", label: 'Door is in unknown state. Push to open.'
-                attributeState "open", label: 'Coop door is open. Push to close.'
-                attributeState "opening", label: 'Caution, door is opening!'
-                attributeState "closed", label: 'Coop door is closed. Push to open.'
-                attributeState "closing", label: 'Caution, door is closing!'
-                attributeState "jammed", label: 'Door open! Push for high-force close'
-                attributeState "forced close", label: "Door is closed. Push to open."
-                attributeState "fault", label: 'Door fault check electrical connection.'
-                attributeState "Sent", label: 'Command sent to CoopBoss...'
-			}                 
-    	}        
-        
-		standardTile("autoClose", "device.autoCloseEnable", width: 2, height: 2){
-			state "on", label: 'Auto', action:"autoCloseOff", icon: "st.doors.garage.garage-closing", backgroundColor: "#79b821", nextState:"Sent"
-			state "off", label: 'Auto', action:"autoCloseOn", icon: "st.doors.garage.garage-closing", nextState:"Sent"
-			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
-		}    
-        
-		standardTile("autoOpen", "device.autoOpenEnable", width: 2, height: 2){
-			state "on", label: 'Auto', action:"autoOpenOff", icon: "st.doors.garage.garage-opening", backgroundColor: "#79b821", nextState:"Sent"
-			state "off", label: 'Auto', action:"autoOpenOn", icon: "st.doors.garage.garage-opening", nextState:"Sent"
-			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
-		}            
-        
-		valueTile("TempProb1", "device.TempProb1", width: 2, height: 2, decoration: "flat"){
-        state "default", label:'Coop\r${currentValue}°', unit:"F", action:"updateTemp1"}         
-        
-		valueTile("TempProb2", "device.TempProb2", width: 2, height: 2, decoration: "flat"){
-        state "default", label:'Outside\r${currentValue}°', unit:"F", action:"updateTemp2"}        
-
-		valueTile("currentLevel", "device.currentLightLevel", width: 2, height: 2, decoration: "flat") {
-        state "default", label:'Sun\r${currentValue}', action:"updateSun"}    
-                
-        valueTile("dayOrNight", "device.dayOrNight", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
-        state "default", label:'${currentValue}.'
-        }             
-                
-        controlTile("SetClSlider", "device.closeLightLevel", "slider", height: 2, width: 4, inactiveLabel: false, range:"(1..100)") {
-        state "closeLightLevel", action:"setCloseLevelTo", backgroundColor:"#d04e00"
-        }
-        
-        valueTile("SetClValue", "device.closeLightLevel", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
-        state "default", label:'Close\nSunlight\n${currentValue}', action:'updateCloseLightLevel'
-        }        
-        
-        controlTile("SetOpSlider", "device.openLightLevel", "slider", height: 2, width: 4, inactiveLabel: false, range:"(1..100)") {
-        state "openLightLevel", action:"setOpenLevelTo", backgroundColor:"#d04e00"
-        }
-        
-        valueTile("SetOpValue", "device.openLightLevel", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
-        state "default", label:'Open\nSunlight\n${currentValue}', action:'updateOpenLightLevel'
-        } 
-        
-        controlTile("SetSensitivitySlider", "device.doorSensitivity", "slider", height: 2, width: 4, inactiveLabel: false, range:"(1..100)") {
-        state "openLightLevel", action:"setSensitivityLevel", backgroundColor:"#d04e00"
-        }        
-        
-        valueTile("SetSensitivityValue", "device.doorSensitivity", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
-        state "default", label:'Door\nSensitivity\n${currentValue}', action:'updateSensitivity'
-        }          
-        
-        standardTile("refresh", "device.refresh", width: 2, height: 2, decoration: "flat", inactiveLabel: false) {
-		state "default", label:'All', action:"refresh.refresh", icon:"st.secondary.refresh-icon"
-		}   
-        
-		standardTile("aux1", "device.Aux1", width: 2, height: 2, canChangeIcon: true) {
-			state "off", label:'Aux 1', action:"Aux1On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
-			state "on", label:'Aux 1', action:"Aux1Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
-			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"            
-		}        
-        
-		standardTile("aux2", "device.Aux2", width: 2, height: 2, canChangeIcon: true) {
-			state "off", label:'Aux 2', action:"Aux2On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
-			state "on", label:'Aux 2', action:"Aux2Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
-			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"   
-		}            
-        
-		main "doorCtrl"
-		details (["dtlsDoorCtrl", "TempProb1", "TempProb2", "currentLevel", "autoClose", "autoOpen", "dayOrNight",
-        "SetClSlider", "SetClValue", "SetOpSlider", "SetOpValue", "SetSensitivitySlider", "SetSensitivityValue",
-        "aux1", "aux2", "refresh"])
-	}
-}
-
-// Parse incoming device messages to generate events  def parse(String description) {
-def parse(String description) {
-	log.debug "description: $description"
-	Map map = [:]
-	if (description?.startsWith('catchall:')) {
-		map = parseCatchAllMessage(description)
-	}
-	else if (description?.startsWith('read attr -')) {
-		map = parseReportAttributeMessage(description)
-	}
-	else if (description?.startsWith('temperature: ') || description?.startsWith('humidity: ')) {
-		map = parseCustomMessage(description)
-	}
-    log.debug map
-	//return map ? createEvent(map) : null
-    sendEvent(map)
-    callUpdateStatusTxt() 
-}
-
-private Map parseCatchAllMessage(String description) {
-    Map resultMap = [:]    
-    def cluster = zigbee.parse(description)
-    log.debug cluster
-    if (cluster.clusterId == 0x0402) {
-        switch(cluster.sourceEndpoint) {
-
-            case 0x39:		// Endpoint 0x39 is the temperature of probe 1
-            String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-            resultMap.name = "TempProb1"
-            def celsius = Integer.valueOf(temp,16).shortValue()    
-            if (celsius ==  -32768){									// This number is used to indicate an error in the temperature reading
-                resultMap.value = "---"
-            }else{
-                celsius = celsius / 100									// Temperature value is sent X 100.
-                resultMap.value = celsiusToFahrenheit(celsius)		
-                if (tempOffsetOutside) {
-                    def offset = tempOffsetOutside as int
-					resultMap.value = resultMap.value + offset
-                }                      
-            }
-            sendEvent(name: "temperature", value: resultMap.value, displayed: false)		// set the temperatureMeasurment capability to temperature
-            break
-
-            case 0x40:													// Endpoint 0x40 is the temperature of probe 2
-            String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-            resultMap.name = "TempProb2"
-            def celsius = Integer.valueOf(temp,16).shortValue() 									
-            //resultMap.descriptionText = "Prob2 celsius value = ${celsius}"
-            if (celsius ==  -32768){									// This number is used to indicate an error in the temperature reading
-                resultMap.value = "---"
-            }else{
-            	celsius = celsius / 100									// Temperature value is sent X 100.
-                resultMap.value = celsiusToFahrenheit(celsius)			
-                if (tempOffsetCoop) {
-                    def offset = tempOffsetCoop as int
-					resultMap.value = resultMap.value + offset
-                }                                                
-            }                           
-            break
-    	}                        
-	}
-    
-    if (cluster.clusterId == 0x0101 && cluster.command == 0x0b) {		// This is a default response to a command sent to cluster 0x0101 door control
-    	//log.debug "Default Response Data = $cluster.data"
-        switch(cluster.data) {
-        
-        case "[10, 0]":		// 0x0a turn auto close on command verified          
-        resultMap.name = "autoCloseEnable"
-        resultMap.value = "on"        
-        break                 
-        
-        case "[11, 0]":		// 0x0b turn auto close off command verified          
-        resultMap.name = "autoCloseEnable"
-        resultMap.value = "off"        
-        break            
-        
-        case "[12, 0]":		// 0x0C turn auto open on command verified           
-        resultMap.name = "autoOpenEnable"
-        resultMap.value = "on"        
-        break    
-        
-        case "[13, 0]":		// 0x0d turn auto open off command verified           
-        resultMap.name = "autoOpenEnable"
-        resultMap.value = "off"        
-        break               
-        
-        
-        case "[20, 0]":		// 0x14 Aux1 On command verified 
-        log.info "verified Aux1 On"
-    	sendEvent(name: "switch", value: "on", displayed: false)   
-        resultMap.name = "Aux1"
-        resultMap.value = "on"        
-        break
-
-        case "[21, 0]":		// 0x15 Aux1 Off command verified 
-        log.info "verified Aux1 Off"
-    	sendEvent(name: "switch", value: "off", displayed: false)
-        resultMap.name = "Aux1"
-        resultMap.value = "off"
-        break
-        
-        case "[22, 0]":		// 0x16 Aux2 On command verified 
-        log.info "verified Aux2 On"    
-        resultMap.name = "Aux2"
-        resultMap.value = "on"        
-        break
-
-        case "[23, 0]":		// 0x17 Aux2 Off command verified 
-        log.info "verified Aux2 Off"
-        resultMap.name = "Aux2"
-        resultMap.value = "off"        
-        break        
-        
-        }
-    }
-    return resultMap
-}
-
-private Map parseReportAttributeMessage(String description) {
-    Map resultMap = [:]
-    def descMap = parseDescriptionAsMap(description)
-    //log.debug "read attr descMap --> $descMap"
-    if (descMap.cluster == "0101" && descMap.attrId == "0003") {
-        resultMap.name = "doorState"
-        if (descMap.value == "00"){
-            resultMap.value = "unknown"
-            sendEvent(name: "door", value: "unknown", displayed: false)
-        }else if(descMap.value == "01"){
-            resultMap.value = "closed"
-            sendEvent(name: "door", value: "closed", displayed: false)            
-        }else if(descMap.value == "02"){
-            resultMap.value = "open"    
-            sendEvent(name: "door", value: "open", displayed: false)              
-        }else if(descMap.value == "03"){
-            resultMap.value = "jammed"     
-        }else if(descMap.value == "04"){
-            resultMap.value = "forced close"   
-        }else if(descMap.value == "05"){
-            resultMap.value = "forced close"   
-        }else if(descMap.value == "06"){
-            resultMap.value = "closing"  
-            sendEvent(name: "door", value: "closing", displayed: false)              
-        }else if(descMap.value == "07"){
-            resultMap.value = "opening"
-            sendEvent(name: "door", value: "opening", displayed: false)                 
-        }else if(descMap.value == "08"){
-            resultMap.value = "fault"            
-        }else {            
-            resultMap.value = "unknown"
-        }   
-        resultMap.descriptionText = "Door State Changed to ${resultMap.value}"
-        
-    } else if (descMap.cluster == "0101" && descMap.attrId == "0400") { 
-        resultMap.name = "currentLightLevel"
-        resultMap.value = (Integer.parseInt(descMap.value, 16))      
-        resultMap.displayed = false
-        
-    } else if (descMap.cluster == "0101" && descMap.attrId == "0401") { 
-        resultMap.name = "closeLightLevel"
-        resultMap.value = (Integer.parseInt(descMap.value, 16))
-
-    } else if (descMap.cluster == "0101" && descMap.attrId == "0402") { 
-        resultMap.name = "openLightLevel"
-        resultMap.value = (Integer.parseInt(descMap.value, 16))
-
-    } else if (descMap.cluster == "0101" && descMap.attrId == "0403") { 
-        resultMap.name = "autoCloseEnable"
-        if (descMap.value == "01"){resultMap.value = "on"}
-        else{resultMap.value = "off"}       
-
-    } else if (descMap.cluster == "0101" && descMap.attrId == "0404") { 
-        resultMap.name = "autoOpenEnable"
-        if (descMap.value == "01"){resultMap.value = "on"}
-        else{resultMap.value = "off"}  
-
-    } else if (descMap.cluster == "0101" && descMap.attrId == "0405") { 
-        resultMap.name = "doorCurrent"
-        resultMap.value = (Integer.parseInt(descMap.value, 16)) 
-        resultMap.value = resultMap.value * 0.001        
-
-     } else if (descMap.cluster == "0101" && descMap.attrId == "0408") { 
-        resultMap.name = "doorSensitivity"
-        resultMap.value = (100 - Integer.parseInt(descMap.value, 16))
-        
-    } else if (descMap.cluster == "0101" && descMap.attrId == "0409") { 
-        resultMap.name = "baseDoorCurrent"
-        resultMap.value = (Integer.parseInt(descMap.value, 16)) 
-        resultMap.value = resultMap.value * 0.001                
-        
-    } else if (descMap.cluster == "0101" && descMap.attrId == "040a") { 
-        resultMap.name = "doorVoltage"
-        resultMap.value = (Integer.parseInt(descMap.value, 16))  
-        resultMap.value = resultMap.value * 0.001
-        
-    } else if (descMap.cluster == "0101" && descMap.attrId == "040b") { 
-        resultMap.name = "Aux1"
-        if(descMap.value == "01"){
-        resultMap.value = "on"
-    	sendEvent(name: "switch", value: "on", displayed: false)        
-        }else{
-        resultMap.value = "off"        
-    	sendEvent(name: "switch", value: "off", displayed: false)        
-        }
-     
-    } else if (descMap.cluster == "0101" && descMap.attrId == "040c") { 
-        resultMap.name = "Aux2"
-        if(descMap.value == "01"){
-        resultMap.value = "on"
-        }else{
-        resultMap.value = "off"        
-        }   
-    } else if (descMap.cluster == "0101" && descMap.attrId == "040d") { 
-        resultMap.name = "photoCalibration"
-        resultMap.value = (Integer.parseInt(descMap.value, 16))           
-    } else if (descMap.cluster == "0101" && descMap.attrId == "040e") { 
-        resultMap.name = "baseCurrentNE"
-        resultMap.value = (Integer.parseInt(descMap.value, 16))           
-    }    
-    return resultMap
-}
-
-private Map parseCustomMessage(String description) {
-    //log.info "ParseCustomMessage called with ${description}"
-	Map resultMap = [:]
-    if (description?.startsWith('temperature: ')) {
-        resultMap.name = "temperature"
-    	def rawT = (description - "temperature: ").trim()
-        resultMap.descriptionText = "Temperature celsius value = ${rawT}"
-        def rawTint = Float.parseFloat(rawT)
-        if (rawTint > 65){
-        	resultMap.name = null
-            resultMap.value = null
-            resultMap.descriptionText = "Temperature celsius value = ${rawT} is invalid not updating"
-            log.warn "Invalid temperature value detected! rawT = ${rawT}, description = ${description}"
-        }else if (rawT ==  -32768){											// This number is used to indicate an error in the temperature reading
-            resultMap.value = "ERR"
-        }else{
-            resultMap.value = celsiusToFahrenheit(rawT.toFloat()) as Float
-            sendEvent(name: "TempProb1", value: resultMap.value, displayed: false)		// Workaround for lack of access to endpoint information for Temperature report  
-        }        
-	}
-    resultMap.displayed = false
-    log.info "Temperature reported = ${resultMap.value}"
-    return resultMap    
-}
-
-def parseDescriptionAsMap(description) {
-    (description - "read attr - ").split(",").inject([:]) { map, param ->
-        def nameAndValue = param.split(":")
-        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-    }
-}
-
-// Added for Temeperature parse
-def getFahrenheit(value) {
-	def celsius = Integer.parseInt(value, 16)
-	return celsiusToFahrenheit(celsius) as Integer
-}
-
-// Private methods
-def callUpdateStatusTxt(){	
-	def cTemp = device.currentState("TempProb1")?.value
-    def cLight = 0
-    def testNull = device.currentState("currentLightLevel")?.value
-    if (testNull != null){
-    cLight = device.currentState("currentLightLevel")?.value as int
-    }   
-	updateStatusTxt(cTemp, cLight)
-}
-
-def updateStatusTxt(currentTemp, currentLight){
-	//log.info "called updateStatusTxt with ${currentTemp}, ${currentLight}"
-    def cTmp = currentTemp
-    def cLL = 10
-    def oLL = 10
-    
-    def testNull = device.currentState("closeLightLevel")?.value
-    if (testNull != null){
-    	cLL = device.currentState("closeLightLevel")?.value as int
-	}
-
-    testNull = device.currentState("openLightLevel")?.value
-    if (testNull != null){
-    	oLL = device.currentState("openLightLevel")?.value as int
-    }   
-    
-    def aOpnEn = device.currentState("autoOpenEnable")?.value
-    def aClsEn = device.currentState("autoCloseEnable")?.value
-    
-        if (currentLight < cLL){  
-        	if (aOpnEn == "on"){
-           		sendEvent(name: "dayOrNight", value: "Sun must be > ${oLL} to auto open", displayed: false)
-            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} open at ${oLL}. Coop ${cTmp}°", displayed: false)
-                }else{
-           		sendEvent(name: "dayOrNight", value: "Auto Open is turned off.", displayed: false)
-            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} auto open off. Coop ${cTmp}°", displayed: false)                
-                }
-        }else { 
-        	if (aClsEn == "on"){        
-            	sendEvent(name: "dayOrNight", value: "Sun must be < ${cLL} to auto close", displayed: false)
-            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} close at ${cLL}. Coop ${cTmp}°", displayed: false)
-                }else{
-           		sendEvent(name: "dayOrNight", value: "Auto Close is turned off.", displayed: false)
-            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} auto close off. Coop ${cTmp}°", displayed: false)                   
-                }
-        }
-}
-
-// Commands to device
-def on() {
-	log.debug "on calling Aux1On"
-    Aux1On()
-}
-
-def off() {
-	log.debug "off calling Aux1Off"
-    Aux1Off()
-}
-
-def close() {
-	log.debug "close calling closeDoor"
-	closeDoor()
-}
-
-def open() {
-	log.debug "open calling openDoor"
-	openDoor()
-}
-
-def Aux1On(){
-	log.debug "Sending Aux1 = on command"
-	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x14 {}"             
-}
-
-def Aux1Off(){     
-	log.debug "Sending Aux1 = off command"
-	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x15 {}"             
-}
-
-def Aux2On(){
-	log.debug "Sending Aux2 = on command"
-	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x16 {}"             
-}
-
-def Aux2Off(){
-	log.debug "Sending Aux2 = off command"
-	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x17 {}"             
-}
-
-def openDoor() {
-	log.debug "Sending Open command"
-	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x1 {}"
-}
-
-def closeDoor() {
-	log.debug "Sending Close command"
-	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0 {}"
-}
-
-def closeDoorHiI() {
-	log.debug "Sending High Current Close command"
-	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x4 {}"
-}
-
-def autoOpenOn() {
-	log.debug "Setting Auto Open On"   
-	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0C {}"
-}
-
-def autoOpenOff() {
-	log.debug "Setting Auto Open Off"   
-	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0D {}"
-}
-
-def autoCloseOn() {
-	log.debug "Setting Auto Close On"
-	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0A {}"
-}
-
-def autoCloseOff() {
-	log.debug "Setting Auto Close Off"
-	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0B {}"
-}
-
-def setOpenLevelTo(cValue) {
-	def cX = cValue
-	log.debug "Setting Open Light Level to ${cX} Hex = 0x${Integer.toHexString(cX)}"
-    
-    def cmd = []
-    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x402 0x23 {${Integer.toHexString(cX)}}"	
-    cmd << "delay 150"
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x402"											// Read light value   
-    cmd    
-}
-
-def setCloseLevelTo(cValue) {
-	def cX = cValue
-	log.debug "Setting Close Light Level to ${cX} Hex = 0x${Integer.toHexString(cX)}"
-    
-    def cmd = []
-    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x401 0x23 {${Integer.toHexString(cX)}}"	
-    cmd << "delay 150"
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x401"											// Read light value   
-    cmd 
-    
-}
-
-def setSensitivityLevel(cValue) {
-	def cX = 100 - cValue
-	log.debug "Setting Door sensitivity level to ${cX} Hex = 0x${Integer.toHexString(cX)}"
-    
-    def cmd = []
-    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x408 0x23 {${Integer.toHexString(cX)}}"		// Write attribute.  0x23 is a 32 bit integer value. 
-    cmd << "delay 150"
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x408"											// Read attribute 
-    cmd    
-}
-
-def setNewBaseCurrent(cValue) {
-	def cX = cValue as int
-	log.info "Setting new BaseCurrent to ${cX} Hex = 0x${Integer.toHexString(cX)}"
-    
-    def cmd = []
-    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x409 0x23 {${Integer.toHexString(cX)}}"		// Write attribute.  0x23 is a 32 bit integer value.
-    cmd << "delay 150"
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x409"											// Read attribute 
-    cmd    
-}
-
-def setNewPhotoCalibration(cValue) {
-	def cX = cValue as int
-	log.info "Setting new Photoresister calibration to ${cX} Hex = 0x${Integer.toHexString(cX)}"
-    
-    def cmd = []
-    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40D 0x2B {${Integer.toHexString(cX)}}"		// Write attribute.  0x2B is a 32 bit signed integer value. 
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40D"											// Read attribute 
-    cmd    
-}
-
-def readNewPhotoCalibration() {
-	log.info "Requesting current Photoresister calibration "
-    
-    def cmd = []
-	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40D"											// Read attribute 
-    cmd    
-}
-
-def readBaseCurrentNE() {
-	log.info "Requesting base current never exceed setting "
-    
-    def cmd = []
-	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40E"											// Read attribute 
-    cmd    
-}
-
-def setBaseCurrentNE(cValue) {
-	def cX = cValue as int
-	log.info "Setting new base Current Never Exceed to ${cX} Hex = 0x${Integer.toHexString(cX)}"
-    
-    def cmd = []
-    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40E 0x23 {${Integer.toHexString(cX)}}"		// Write attribute.  0x23 is a 32 bit unsigned integer value. 
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40E"											// Read attribute 
-    cmd    
-}
-
-def poll(){
-	log.debug "Polling Device"
-    def cmd = []
-	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0003"   // Read Door State 
-    cmd << "delay 150"
-    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0400"	// Read Current Light Level
-    cmd << "delay 150"        
-    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x39 0x0402 0x0000"    // Read probe 1 Temperature 
-    cmd << "delay 150"       
-    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x40 0x0402 0x0000"    // Read probe 2 Temperature        
-    
-    cmd
-}
-
-def updateTemp1() {
-	log.debug "Sending attribute read request for Temperature Probe1"   
-    def cmd = []    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x39 0x0402 0x0000"    // Read Current Temperature from Coop Probe 1
-    cmd
-}
-
-def updateTemp2() {
-	log.debug "Sending attribute read request for Temperature Probe2"   
-    def cmd = []    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x40 0x0402 0x0000"    // Read Current Temperature from Coop Probe 2   
-    cmd
-}
-
-
-def updateSun() {
-	log.debug "Sending attribute read request for Sun Light Level"   
-    def cmd = []    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0400"	// Read Current Light Level
-    cmd
-}
-
-def updateSensitivity() {
-	log.debug "Sending attribute read request for door sensitivity"   
-    def cmd = []    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0408"	// Read Door sensitivity
-    cmd
-}
-
-def updateCloseLightLevel() {
-	log.debug "Sending attribute read close light level"   
-    def cmd = []    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0401"	
-    cmd
-}
-
-def updateOpenLightLevel() {
-	log.debug "Sending attribute read open light level"   
-    def cmd = []    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0402"	
-    cmd
-}
-
-def refresh() {
-	log.debug "sending refresh command"   
-    def cmd = []
-	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0003"   // Read Door State 
-    cmd << "delay 150"
-    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0400"	// Read Current Light Level
-    cmd << "delay 150"        
-    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0401"	// Read Door Close Light Level
-    cmd << "delay 150"    
-    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0402"	// Read Door Open Light Level
-    cmd << "delay 150"
-    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0403"	// Read Auto Door Close Settings 
-    cmd << "delay 150"    
-    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0404"	// Read Auto Door Open Settings
-    cmd << "delay 150"  
-    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x39 0x0402 0x0000"    // Read Current Temperature from Coop Probe 1
-    cmd << "delay 150" 
-    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0408"    // Object detection sensitivity 
-    cmd << "delay 150"  
-    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x40 0x0402 0x0000"    // Read Current Temperature from Coop Probe 2    
-    cmd << "delay 150"   
-    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0405"    // Current required to close door      
-    cmd << "delay 150"   
-    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x040B"    // Aux1 Status      
-    cmd << "delay 150"       
-    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x040C"    // Aux2 Status      
-    cmd << "delay 150"     
-    
-    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x409"		// Read Base current
-
-    cmd
-}
-
-def configure() {
-    log.debug "Binding SEP 0x38 DEP 0x01 Cluster 0x0101 Lock cluster to hub"  
-    log.debug "Binding SEP 0x39 DEP 0x01 Cluster 0x0402 Temperature cluster to hub"      
-    log.debug "Binding SEP 0x40 DEP 0x01 Cluster 0x0402 Temperature cluster to hub"      
-    
-    def cmd = []
-    cmd << "zdo bind 0x${device.deviceNetworkId} 0x38 0x01 0x0101 {${device.zigbeeId}} {}"			// Bind to end point 0x38 and the lock cluster
-    cmd << "delay 150"
-    cmd << "zdo bind 0x${device.deviceNetworkId} 0x39 0x01 0x0402 {${device.zigbeeId}} {}"    		// Bind to end point 0x39 and the temperature cluster
-    cmd << "delay 150"
-    cmd << "zdo bind 0x${device.deviceNetworkId} 0x40 0x01 0x0402 {${device.zigbeeId}} {}"    		// Bind to end point 0x40 and the temperature cluster
-    cmd << "delay 1500"    
-    
-    log.info "Sending ZigBee Configuration Commands to Coop Control"
-    return cmd + refresh()
-}
-
-

devicetypes/roomieremote-agent/simple-sync.src/simple-sync.groovy

@@ -1,128 +0,0 @@
-/**
- *  Simple Sync
- *
- *  Copyright 2015 Roomie Remote, Inc.
- *
- *	Date: 2015-09-22
- */
-metadata
-{
-	definition (name: "Simple Sync", namespace: "roomieremote-agent", author: "Roomie Remote, Inc.")
-    {
-		capability "Media Controller"
-	}
-
-	// simulator metadata
-	simulator
-    {
-	}
-
-	// UI tile definitions
-	tiles
-    {
-		standardTile("mainTile", "device.status", width: 1, height: 1, icon: "st.Entertainment.entertainment11")
-        {
-        	state "default", label: "Simple Sync", icon: "st.Home.home2", backgroundColor: "#55A7FF"
-		}
-        
-    	def detailTiles = ["mainTile"]
-		
-		main "mainTile"
-		details(detailTiles)
-	}
-}
-
-def parse(String description)
-{
-	def results = []
-	
-	try
-	{
-		def msg = parseLanMessage(description)
-		
-		if (msg.headers && msg.body)
-		{
-        	switch (msg.headers["X-Roomie-Echo"])
-			{
-            	case "getAllActivities":
-                    handleGetAllActivitiesResponse(msg)
-                	break
-			}
-    	}
-	}
-    catch (Throwable t)
-    {
-	    sendEvent(name: "parseError", value: "$t", description: description)
-    	throw t
-    }
-    
-    results
-}
-
-def handleGetAllActivitiesResponse(response)
-{
-	def body = parseJson(response.body)
-    
-    if (body.status == "success")
-    {
-	    def json = new groovy.json.JsonBuilder()
-	    def root = json activities: body.data
-	    def data = json.toString()
-    	
-	    sendEvent(name: "activities", value: data)
-    }
-}
-
-def getAllActivities(evt)
-{
-    def host = getHostAddress(device.deviceNetworkId)
-	
-	def action = new physicalgraph.device.HubAction(method: "GET",
-													path: "/api/v1/activities",
-													headers: [HOST: host, "X-Roomie-Echo": "getAllActivities"])
-	
-	action
-}
-
-def startActivity(evt)
-{
-    def uuid = evt
-    def host = getHostAddress(device.deviceNetworkId)
-    def activity = new groovy.json.JsonSlurper().parseText(device.currentValue('activities') ?: "{ 'activities' : [] }").activities.find { it.uuid == uuid }
-    def toggle = activity["toggle"]
-    def jsonMap = ["activity_uuid": uuid]
-    
-    if (toggle != null)
-    {
-        jsonMap << ["toggle_state": toggle ? "on" : "off"]
-    }
-    
-    def json = new groovy.json.JsonBuilder(jsonMap)
-    def jsonBody = json.toString()
-    def headers = [HOST: host, "Content-Type": "application/json"]
-    
-    def action = new physicalgraph.device.HubAction(method: "POST",
-													path: "/api/v1/runactivity",
-													body: jsonBody,
-													headers: headers)
-	
-    action
-}
-
-def getHostAddress(d)
-{
-	def parts = d.split(":")
-	def ip = convertHexToIP(parts[0])
-	def port = convertHexToInt(parts[1])
-	return ip + ":" + port
-}
-
-def String convertHexToIP(hex)
-{
-	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
-}
-
-def Integer convertHexToInt(hex)
-{
-	Integer.parseInt(hex,16)
-}

devicetypes/smartthings/-.src/-.groovy

@@ -0,0 +1,412 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  SmartSense Virtual OpenClosed
+ *
+ *  Author: SmartThings
+ *  Date: 2013-03-07
+ */
+metadata {
+	definition (name: "가상열기닫기센서", namespace: "smartthings", author: "SmartThings") {
+		capability "Three Axis"
+		capability "Contact Sensor"
+		capability "Acceleration Sensor"
+		capability "Signal Strength"
+		capability "Temperature Measurement"
+		capability "Sensor"
+		capability "Battery"
+	}
+
+	simulator {
+		status "open": "zone report :: type: 19 value: 0031"
+		status "closed": "zone report :: type: 19 value: 0030"
+
+		status "acceleration": "acceleration: 1, rssi: 0, lqi: 0"
+		status "no acceleration": "acceleration: 0, rssi: 0, lqi: 0"
+
+		for (int i = 20; i <= 100; i += 10) {
+			status "${i}F": "contactState: 0, accelerationState: 0, temp: $i F, battery: 100, rssi: 100, lqi: 255"
+		}
+
+		// kinda hacky because it depends on how it is installed
+		status "x,y,z: 0,0,0": "x: 0, y: 0, z: 0, rssi: 100, lqi: 255"
+		status "x,y,z: 1000,0,0": "x: 1000, y: 0, z: 0, rssi: 100, lqi: 255"
+		status "x,y,z: 0,1000,0": "x: 0, y: 1000, z: 0, rssi: 100, lqi: 255"
+		status "x,y,z: 0,0,1000": "x: 0, y: 0, z: 1000, rssi: 100, lqi: 255"
+	}
+    
+	preferences {
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+	}    
+
+	tiles {
+		standardTile("contact", "device.contact", width: 2, height: 2) {
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+		}
+		standardTile("acceleration", "device.acceleration") {
+			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
+		}
+		valueTile("temperature", "device.temperature") {
+			state("temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+			)
+		}
+		valueTile("3axis", "device.threeAxis", decoration: "flat", wordWrap: false) {
+			state("threeAxis", label:'${currentValue}', unit:"", backgroundColor:"#ffffff")
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
+			state "battery", label:'${currentValue}% battery', unit:""/*, backgroundColors:[
+				[value: 5, color: "#BC2323"],
+				[value: 10, color: "#D04E00"],
+				[value: 15, color: "#F1D801"],
+				[value: 16, color: "#FFFFFF"]
+			]*/
+		}
+		/*
+		valueTile("lqi", "device.lqi", decoration: "flat", inactiveLabel: false) {
+			state "lqi", label:'${currentValue}% signal', unit:""
+		}
+		*/
+		
+		main(["contact", "acceleration", "temperature"])
+		details(["contact", "acceleration", "temperature", "3axis", "battery"/*, "lqi"*/])
+	}
+}
+
+def parse(String description) {
+	def results
+
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
+		// Ignore this in favor of orientation-based state
+		// results = parseSingleMessage(description)
+	}
+	else {
+		results = parseMultiSensorMessage(description)
+	}
+	log.debug "Parse returned $results.descriptionText"
+	return results
+
+}
+
+private List parseMultiSensorMessage(description) {
+	def results = []
+	if (isAccelerationMessage(description)) {
+		results = parseAccelerationMessage(description)
+	}
+	else if (isContactMessage(description)) {
+		results = parseContactMessage(description)
+	}
+	else if (isRssiLqiMessage(description)) {
+		results = parseRssiLqiMessage(description)
+	}
+	else if (isOrientationMessage(description)) {
+		results = parseOrientationMessage(description)
+	}
+
+	results
+}
+
+private List parseAccelerationMessage(String description) {
+	def results = []
+	def parts = description.split(',')
+	parts.each { part ->
+		part = part.trim()
+		if (part.startsWith('acceleration:')) {
+			results << getAccelerationResult(part, description)
+		}
+		/*
+		// TEMPORARILY THROW RSSI & LQI ON THE FLOOR TO SAVE PROCESSING
+		else if (part.startsWith('rssi:')) {
+			results << getRssiResult(part, description)
+		}
+		else if (part.startsWith('lqi:')) {
+			results << getLqiResult(part, description)
+		}
+		*/
+	}
+
+	results
+}
+
+private List parseContactMessage(String description) {
+	def results = []
+	def parts = description.split(',')
+	parts.each { part ->
+		part = part.trim()
+		if (part.startsWith('accelerationState:')) {
+			results << getAccelerationResult(part, description)
+		}
+		else if (part.startsWith('temp:')) {
+			results << getTempResult(part, description)
+		}
+		else if (part.startsWith('battery:')) {
+			results << getBatteryResult(part, description)
+		}
+		/*
+		// TEMPORARILY THROW RSSI & LQI ON THE FLOOR TO SAVE PROCESSING
+		else if (part.startsWith('rssi:')) {
+			results << getRssiResult(part, description)
+		}
+		else if (part.startsWith('lqi:')) {
+			results << getLqiResult(part, description)
+		}
+		*/
+	}
+
+	results
+}
+
+private List parseOrientationMessage(String description) {
+	def results = []
+	def xyzResults = [x: 0, y: 0, z: 0]
+	def parts = description.split(',')
+	parts.each { part ->
+		part = part.trim()
+		if (part.startsWith('x:')) {
+			def unsignedX = part.split(":")[1].trim().toInteger()
+			def signedX = unsignedX > 32767 ? unsignedX - 65536 : unsignedX
+			xyzResults.x = signedX
+		}
+		else if (part.startsWith('y:')) {
+			def unsignedY = part.split(":")[1].trim().toInteger()
+			def signedY = unsignedY > 32767 ? unsignedY - 65536 : unsignedY
+			xyzResults.y = signedY
+		}
+		else if (part.startsWith('z:')) {
+			def unsignedZ = part.split(":")[1].trim().toInteger()
+			def signedZ = unsignedZ > 32767 ? unsignedZ - 65536 : unsignedZ
+			xyzResults.z = signedZ
+		}
+		/*
+		// TEMPORARILY THROW RSSI & LQI ON THE FLOOR TO SAVE PROCESSING
+		else if (part.startsWith('rssi:')) {
+			results << getRssiResult(part, description)
+		}
+		else if (part.startsWith('lqi:')) {
+			results << getLqiResult(part, description)
+		}
+		*/
+	}
+
+	def xyz = getXyzResult(xyzResults, description)
+	results << xyz
+
+	// Looks for Z-axis orientation as virtual contact state
+	def a = xyz.value.split(',').collect{it.toInteger()}
+	def absValueXY = Math.max(Math.abs(a[0]), Math.abs(a[1]))
+	def absValueZ = Math.abs(a[2])
+	log.debug "absValueXY: $absValueXY, absValueZ: $absValueZ"
+
+
+	if (absValueZ > 825 && absValueXY < 175) {
+		results << createEvent(name: "contact", value: "open", unit: "")
+		results << createEvent(name: "status", value: "open", unit: "")
+		log.debug "STATUS: open"
+	}
+	else if (absValueZ < 75 && absValueXY > 825) {
+		results << createEvent(name: "contact", value: "closed", unit: "")
+		results << createEvent(name: "status", value: "closed", unit: "")
+		log.debug "STATUS: closed"
+	}
+
+	results
+}
+
+private List parseRssiLqiMessage(String description) {
+	def results = []
+	// "lastHopRssi: 91, lastHopLqi: 255, rssi: 91, lqi: 255"
+	def parts = description.split(',')
+	parts.each { part ->
+		part = part.trim()
+		if (part.startsWith('lastHopRssi:')) {
+			results << getRssiResult(part, description, true)
+		}
+		else if (part.startsWith('lastHopLqi:')) {
+			results << getLqiResult(part, description, true)
+		}
+		else if (part.startsWith('rssi:')) {
+			results << getRssiResult(part, description)
+		}
+		else if (part.startsWith('lqi:')) {
+			results << getLqiResult(part, description)
+		}
+	}
+
+	results
+}
+
+private getAccelerationResult(part, description) {
+	def name = "acceleration"
+	def value = part.endsWith("1") ? "active" : "inactive"
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText ${name} was $value"
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+		name: name,
+		value: value,
+		unit: null,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: value,
+		isStateChange: isStateChange,
+		displayed: displayed(description, isStateChange)
+	]
+}
+
+private getTempResult(part, description) {
+	def name = "temperature"
+	def temperatureScale = getTemperatureScale()
+	def value = zigbee.parseSmartThingsTemperatureValue(part, "temp: ", temperatureScale)
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText was $value°$temperatureScale"
+	def isStateChange = isTemperatureStateChange(device, name, value.toString())
+
+	[
+		name: name,
+		value: value,
+		unit: temperatureScale,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: name,
+		isStateChange: isStateChange,
+		displayed: displayed(description, isStateChange)
+	]
+}
+
+private getXyzResult(results, description) {
+	def name = "threeAxis"
+	def value = "${results.x},${results.y},${results.z}"
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText ${name} was $value"
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+		name: name,
+		value: value,
+		unit: null,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: name,
+		isStateChange: isStateChange,
+		displayed: false
+	]
+}
+
+private getBatteryResult(part, description) {
+	def batteryDivisor = description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"} ? description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"}.split(":")[1].trim() : null
+	def name = "battery"
+	def value = zigbee.parseSmartThingsBatteryValue(part, batteryDivisor)
+	def unit = "%"
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText ${name} was ${value}${unit}"
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+		name: name,
+		value: value,
+		unit: unit,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: name,
+		isStateChange: isStateChange,
+		displayed: false
+	]
+}
+
+private getRssiResult(part, description, lastHop=false) {
+	def name = lastHop ? "lastHopRssi" : "rssi"
+	def valueString = part.split(":")[1].trim()
+	def value = (Integer.parseInt(valueString) - 128).toString()
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText ${name} was $value dBm"
+
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+		name: name,
+		value: value,
+		unit: "dBm",
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: null,
+		isStateChange: isStateChange,
+		displayed: false
+	]
+}
+
+/**
+ * Use LQI (Link Quality Indicator) as a measure of signal strength. The values
+ * are 0 to 255 (0x00 to 0xFF) and higher values represent higher signal
+ * strength. Return as a percentage of 255.
+ *
+ * Note: To make the signal strength indicator more accurate, we could combine
+ * LQI with RSSI.
+ */
+private getLqiResult(part, description, lastHop=false) {
+	def name = lastHop ? "lastHopLqi" : "lqi"
+	def valueString = part.split(":")[1].trim()
+	def percentageOf = 255
+	def value = Math.round((Integer.parseInt(valueString) / percentageOf * 100)).toString()
+	def unit = "%"
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText ${name} was: ${value}${unit}"
+
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+		name: name,
+		value: value,
+		unit: unit,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: null,
+		isStateChange: isStateChange,
+		displayed: false
+	]
+}
+
+private Boolean isAccelerationMessage(String description) {
+	// "acceleration: 1, rssi: 91, lqi: 255"
+	description ==~ /acceleration:.*rssi:.*lqi:.*/
+}
+
+private Boolean isContactMessage(String description) {
+	// "contactState: 1, accelerationState: 0, temp: 14.4 C, battery: 28, rssi: 59, lqi: 255"
+	description ==~ /contactState:.*accelerationState:.*temp:.*battery:.*rssi:.*lqi:.*/
+}
+
+private Boolean isRssiLqiMessage(String description) {
+	// "lastHopRssi: 91, lastHopLqi: 255, rssi: 91, lqi: 255"
+	description ==~ /lastHopRssi:.*lastHopLqi:.*rssi:.*lqi:.*/
+}
+
+private Boolean isOrientationMessage(String description) {
+	// "x: 0, y: 33, z: 1017, rssi: 102, lqi: 255"
+	description ==~ /x:.*y:.*z:.*rssi:.*lqi:.*/
+}

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -11,17 +11,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
- /*
- *  Purpose: Arrival Sensor HA DTH File
- *
- *  Filename: Arrival-Sensor-HA.src/Arrival-Sensor-HA.groovy
- *
- *  Change History:
- *  1. 20160115 TW - Update/Edit to support i18n translations
- *  2. 20160121 TW - Update to V4 battery calcs, added pref's page title translations
- */
- 
 metadata {
     definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
         capability "Tone"
@@ -43,7 +32,7 @@ metadata {
                 ])
         }
         section {
-            input "checkInterval", "enum", title: "Presence timeout (minutes)", description: "Tap to set",
+            input "checkInterval", "enum", title: "Presence timeout (minutes)",
                     defaultValue:"2", options: ["2", "3", "5"], displayDuringSetup: false
         }
     }
@@ -93,6 +82,7 @@ def parse(String description) {
 
 private handleReportAttributeMessage(String description) {
     def descMap = zigbee.parseDescriptionAsMap(description)
+
     if (descMap.clusterInt == 0x0001 && descMap.attrInt == 0x0020) {
         handleBatteryEvent(Integer.parseInt(descMap.value, 16))
     }
@@ -104,7 +94,6 @@ private handleReportAttributeMessage(String description) {
  * @param volts Battery voltage in .1V increments
  */
 private handleBatteryEvent(volts) {
-	def descriptionText
     if (volts == 0 || volts == 255) {
         log.debug "Ignoring invalid value for voltage (${volts/10}V)"
     }
@@ -118,17 +107,15 @@ private handleBatteryEvent(volts) {
             volts = minVolts
         else if (volts > maxVolts)
             volts = maxVolts
-        def value = batteryMap[volts]
-        if (value != null) {
+        def pct = batteryMap[volts]
+        if (pct != null) {
             def linkText = getLinkText(device)
-            descriptionText = '{{ linkText }} battery was {{ value }}'
             def eventMap = [
                 name: 'battery',
-                value: value,
-                descriptionText: descriptionText,
-                translatable: true
+                value: pct,
+                descriptionText: "${linkText} battery was ${pct}%"
             ]
-            log.debug "Creating battery event for voltage=${volts/10}V: ${linkText} ${eventMap.name} is ${eventMap.value}%"
+            log.debug "Creating battery event for voltage=${volts/10}V: ${eventMap}"
             sendEvent(eventMap)
         }
     }
@@ -144,19 +131,13 @@ private handlePresenceEvent(present) {
         stopTimer()
     }
     def linkText = getLinkText(device)
-    def descriptionText
-    if ( present )
-    	descriptionText = "{{ linkText }} has arrived"
-    else
-    	descriptionText = "{{ linkText }} has left"
     def eventMap = [
         name: "presence",
         value: present ? "present" : "not present",
         linkText: linkText,
-        descriptionText: descriptionText,
-        translatable: true
+        descriptionText: "${linkText} has ${present ? 'arrived' : 'left'}",
     ]
-    log.debug "Creating presence event: ${device.displayName} ${eventMap.name} is ${eventMap.value}"
+    log.debug "Creating presence event: ${eventMap}"
     sendEvent(eventMap)
 }
 
@@ -177,4 +158,4 @@ def checkPresenceCallback() {
     if (timeSinceLastCheckin >= theCheckInterval) {
         handlePresenceEvent(false)
     }
-}
+}

devicetypes/smartthings/arrival-sensor-ha.src/i18n/messages.properties

@@ -1,36 +0,0 @@
-#==============================================================================
-#  Copyright 2016 SmartThings
-#
-#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
-#  use this file except in compliance with the License. You may obtain a copy
-#  of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#  License for the specific language governing permissions and limitations
-#  under the License.
-#==============================================================================
-# Purpose: Arrival Sensor HA i18n Translation File
-#
-# Filename: Arrival-Sensor-HA.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160115 TW Initial release with informal Korean translation.
-#	2. 20160121 TW Added def preference section titles.
-#==============================================================================
-# Korean (ko)
-# Device Preferences
-'''Give your device a name'''.ko=기기 이름 설정
-'''Set Device Image'''.ko=기기 이미지 설정
-'''Presence timeout (minutes)'''.ko=알람 유예 시간 설정 (분)
-'''Tap to set'''.ko=눌러서 설정
-'''Arrival Sensor'''.ko=도착알림 센서
-'''${currentValue}% battery'''.ko=${currentValue}% 배터리
-# Events / Notifications
-'''{{ linkText }} battery was {{ value }}'''.ko={{ linkText }}의 남은 배터리 {{ value }}
-'''{{ linkText }} has arrived'''.ko={{ linkText }} 귀가
-'''{{ linkText }} has left'''.ko={{ linkText }} 외출
-#==============================================================================

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Motion Sensor"
 		capability "Refresh"
+		capability "Polling"
 	}
 
 	tiles {
@@ -67,6 +68,6 @@ def refresh() {
 
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-	parent.pollChild()
+	parent.pollChild(this)
 
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Actuator"
 		capability "Thermostat"
 		capability "Temperature Measurement"
+		capability "Polling"
 		capability "Sensor"
 		capability "Refresh"
 		capability "Relative Humidity Measurement"
@@ -133,7 +134,9 @@ def refresh() {
 
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-	parent.pollChild()
+
+	def results = parent.pollChild(this)
+	generateEvent(results) //parse received message from parent
 }
 
 def generateEvent(Map results) {
@@ -379,16 +382,12 @@ def getDataByName(String name) {
 	state[name] ?: device.getDataValue(name)
 }
 
-def setThermostatMode(String mode) {
-	log.debug "setThermostatMode($mode)"
-	mode = mode.toLowerCase()
-	switchToMode(mode)
+def setThermostatMode(String value) {
+	log.debug "setThermostatMode({$value})"
 }
 
-def setThermostatFanMode(String mode) {
-	log.debug "setThermostatFanMode($mode)"
-	mode = mode.toLowerCase()
-	switchToFanMode(mode)
+def setThermostatFanMode(String value) {
+	log.debug "setThermostatFanMode({$value})"
 }
 
 def generateModeEvent(mode) {

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -36,71 +36,155 @@
  *				Slider range from 0..100
  *	Change 9:	2015-03-06	(Juan Risso)
  *				Setlevel -> value to integer (to prevent smartapp calling this function from not working).
- *	Change 10: 	2016-03-06	(Vinay Rao/Tom Manley)
- *				changed 2/3rds of the file to clean up code and add zigbee library improvements
  *
  */
 
 metadata {
-    definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings") {
 
-        capability "Actuator"
+    	capability "Actuator"
         capability "Configuration"
         capability "Refresh"
-        capability "Sensor"
+		capability "Sensor"
         capability "Switch"
-        capability "Switch Level"
+		capability "Switch Level"
         capability "Polling"
 
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE_Appliances", model: "ZLL Light", deviceJoinName: "GE Link Bulb"
-    }
+	}
 
 	// UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel"
-            }
-        }
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-        main "switch"
-        details(["switch", "refresh"])
-    }
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821", nextState:"turningOff"
+			state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff", nextState:"turningOn"
+ 			state "turningOn", label:'${name}', action: "switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+            state "turningOff", label:'${name}', action: "switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false, range:"(0..100)") {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+			state "level", label: 'Level ${currentValue}%'
+		}
+
+		main(["switch"])
+		details(["switch", "level", "levelSliderControl", "refresh"])
+	}
+
+	    preferences {
+
+        	input("dimRate", "enum", title: "Dim Rate", options: ["Instant", "Normal", "Slow", "Very Slow"], defaultValue: "Normal", required: false, displayDuringSetup: true)
+            input("dimOnOff", "enum", title: "Dim transition for On/Off commands?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: true)
 
-    preferences {
-        input("dimRate", "enum", title: "Dim Rate", options: ["Instant", "Normal", "Slow", "Very Slow"], defaultValue: "Normal", required: false, displayDuringSetup: true)
-        input("dimOnOff", "enum", title: "Dim transition for On/Off commands?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: true)
     }
 }
 
 // Parse incoming device messages to generate events
 def parse(String description) {
-    def resultMap = zigbee.getEvent(description)
-    if (resultMap) {
-        if ((resultMap.name == "level" && state.trigger == "setLevel") || resultMap.name != "level") {  //doing this to account for weird level reporting bug with GE Link Bulbs
-            sendEvent(resultMap)
+	log.trace description
+
+    if (description?.startsWith("on/off:")) {
+		log.debug "The bulb was sent a command to do something just now..."
+		if (description[-1] == "1") {
+        	def result = createEvent(name: "switch", value: "on")
+            log.debug "On command was sent maybe from manually turning on? : Parse returned ${result?.descriptionText}"
+            return result
+        } else if (description[-1] == "0") {
+        	def result = createEvent(name: "switch", value: "off")
+            log.debug "Off command was sent : Parse returned ${result?.descriptionText}"
+            return result
         }
     }
-    else {
-        log.debug "DID NOT PARSE MESSAGE for description : $description"
-        log.debug zigbee.parseDescriptionAsMap(description)
+
+    def msg = zigbee.parse(description)
+
+	if (description?.startsWith("catchall:")) {
+		// log.trace msg
+		// log.trace "data: $msg.data"
+
+        def x = description[-4..-1]
+        // log.debug x
+
+        switch (x)
+        {
+
+        	case "0000":
+
+            	def result = createEvent(name: "switch", value: "off")
+            	log.debug "${result?.descriptionText}"
+           		return result
+                break
+
+            case "1000":
+
+            	def result = createEvent(name: "switch", value: "off")
+            	log.debug "${result?.descriptionText}"
+           		return result
+                break
+
+            case "0100":
+
+            	def result = createEvent(name: "switch", value: "on")
+            	log.debug "${result?.descriptionText}"
+           		return result
+                break
+
+            case "1001":
+
+            	def result = createEvent(name: "switch", value: "on")
+            	log.debug "${result?.descriptionText}"
+           		return result
+                break
+        }
     }
+
+    if (description?.startsWith("read attr")) {
+
+        // log.trace description[27..28]
+        // log.trace description[-2..-1]
+
+    	if (description[27..28] == "0A") {
+
+        	// log.debug description[-2..-1]
+        	def i = Math.round(convertHexToInt(description[-2..-1]) / 256 * 100 )
+			sendEvent( name: "level", value: i )
+        	sendEvent( name: "switch.setLevel", value: i) //added to help subscribers
+
+    	}
+
+    	else {
+
+    		if (description[-2..-1] == "00" && state.trigger == "setLevel") {
+        		// log.debug description[-2..-1]
+        		def i = Math.round(convertHexToInt(description[-2..-1]) / 256 * 100 )
+				sendEvent( name: "level", value: i )
+        		sendEvent( name: "switch.setLevel", value: i) //added to help subscribers
+        	}
+
+        	if (description[-2..-1] == state.lvl) {
+        		// log.debug description[-2..-1]
+        		def i = Math.round(convertHexToInt(description[-2..-1]) / 256 * 100 )
+				sendEvent( name: "level", value: i )
+        		sendEvent( name: "switch.setLevel", value: i) //added to help subscribers
+        	}
+
+    	}
+    }
+
 }
 
 def poll() {
-    def refreshCmds = [
-        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
+
+    [
+	"st rattr 0x${device.deviceNetworkId} 1 6 0", "delay 500",
+    "st rattr 0x${device.deviceNetworkId} 1 8 0", "delay 500",
+    "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}"
     ]
 
-    return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }
 
 def updated() {
@@ -186,63 +270,109 @@ def updated() {
 }
 
 def on() {
+	state.lvl = "00"
     state.trigger = "on/off"
-    zigbee.on()
+
+    // log.debug "on()"
+	sendEvent(name: "switch", value: "on")
+	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
 }
 
 def off() {
+	state.lvl = "00"
     state.trigger = "on/off"
-    zigbee.off()
+
+    // log.debug "off()"
+	sendEvent(name: "switch", value: "off")
+	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
 }
 
 def refresh() {
-    def refreshCmds = [
-        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
-    ]
 
-    return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig()
+    [
+	"st rattr 0x${device.deviceNetworkId} 1 6 0", "delay 500",
+    "st rattr 0x${device.deviceNetworkId} 1 8 0", "delay 500",
+    "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}"
+    ]
+    poll()
+
 }
 
 def setLevel(value) {
+
+    def cmds = []
+	value = value as Integer
+	if (value == 0) {
+		sendEvent(name: "switch", value: "off")
+		cmds << "st cmd 0x${device.deviceNetworkId} 1 8 0 {0000 ${state.rate}}"
+	}
+	else if (device.latestValue("switch") == "off") {
+		sendEvent(name: "switch", value: "on")
+	}
+
+    sendEvent(name: "level", value: value)
+    value = (value * 255 / 100)
+    def level = hex(value);
+
     state.trigger = "setLevel"
-    def cmd
-    def delayForRefresh = 500
+    state.lvl = "${level}"
+
     if (dimRate && (state?.rate != null)) {
-        def computedRate = convertRateValue(state.rate)
-        cmd = zigbee.setLevel(value, computedRate)
-        delayForRefresh += computedRate * 100       //converting tenth of second to milliseconds
+    	cmds << "st cmd 0x${device.deviceNetworkId} 1 8 4 {${level} ${state.rate}}"
     }
     else {
-        cmd = zigbee.setLevel(value, 20)
-        delayForRefresh += 2000
+    	cmds << "st cmd 0x${device.deviceNetworkId} 1 8 4 {${level} 1500}"
     }
-    cmd + ["delay $delayForRefresh"] + zigbee.levelRefresh()
-}
 
-int convertRateValue(rate) {
-    int convertedRate = 0
-    switch (rate)
-    {
-        case "0000":
-            convertedRate = 0
-            break
-
-        case "1500":
-            convertedRate = 20      //0015 hex in int is 2.1
-            break
-
-        case "2500":
-            convertedRate = 35      //0025 hex in int is 3.7
-            break
-
-        case "3500":
-            convertedRate = 50      //0035 hex in int is 5.1
-            break
-    }
-    convertedRate
+    log.debug cmds
+    cmds
 }
 
 def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    return zigbee.onOffConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+
+	log.debug "Configuring Reporting and Bindings."
+	def configCmds = [
+
+        //Switch Reporting
+        "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 1000",
+
+        //Level Control Reporting
+        "zcl global send-me-a-report 8 0 0x20 5 3600 {0010}", "delay 200",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+        "zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 1000",
+		"zdo bind 0x${device.deviceNetworkId} 1 1 8 {${device.zigbeeId}} {}", "delay 500",
+	]
+    return configCmds + refresh() // send refresh cmds as part of config
 }
+
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -1,227 +0,0 @@
-/**
- *  Hue Bloom
- *
- *  Philips Hue Type "Color Light"
- *
- *  Author: SmartThings
- */
-
-// for the UI
-metadata {
-	// Automatically generated. Make future change here.
-	definition (name: "Hue Bloom", namespace: "smartthings", author: "SmartThings") {
-		capability "Switch Level"
-		capability "Actuator"
-		capability "Color Control"
-		capability "Switch"
-		capability "Refresh"
-		capability "Sensor"
-
-		command "setAdjustedColor"
-        command "reset"
-        command "refresh"
-	}
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles (scale: 2){
-		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
-            }
-            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-	            attributeState "level", label: 'Level ${currentValue}%'
-			}
-			tileAttribute ("device.color", key: "COLOR_CONTROL") {
-				attributeState "color", action:"setAdjustedColor"
-			}
-		}
-
-		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
-		}
-
-		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main(["rich-control"])
-		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
-	}
-}
-
-// parse events into attributes
-def parse(description) {
-	log.debug "parse() - $description"
-	def results = []
-
-	def map = description
-	if (description instanceof String)  {
-		log.debug "Hue Bulb stringToMap - ${map}"
-		map = stringToMap(description)
-	}
-
-	if (map?.name && map?.value) {
-		results << createEvent(name: "${map?.name}", value: "${map?.value}")
-	}
-	results
-}
-
-// handle commands
-void on() {
-	log.trace parent.on(this)
-	sendEvent(name: "switch", value: "on")
-}
-
-void off() {
-	log.trace parent.off(this)
-	sendEvent(name: "switch", value: "off")
-}
-
-void nextLevel() {
-	def level = device.latestValue("level") as Integer ?: 0
-	if (level <= 100) {
-		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
-	}
-	else {
-		level = 25
-	}
-	setLevel(level)
-}
-
-void setLevel(percent) {
-    log.debug "Executing 'setLevel'"
-    if (verifyPercent(percent)) {
-        parent.setLevel(this, percent)
-        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
-        sendEvent(name: "switch", value: "on")
-    }
-}
-
-void setSaturation(percent) {
-    log.debug "Executing 'setSaturation'"
-    if (verifyPercent(percent)) {
-        parent.setSaturation(this, percent)
-        sendEvent(name: "saturation", value: percent, displayed: false)
-    }
-}
-
-void setHue(percent) {
-    log.debug "Executing 'setHue'"
-    if (verifyPercent(percent)) {
-        parent.setHue(this, percent)
-        sendEvent(name: "hue", value: percent, displayed: false)
-    }
-}
-
-void setColor(value) {
-    log.debug "setColor: ${value}, $this"
-    def events = []
-    def validValues = [:]
-
-    if (verifyPercent(value.hue)) {
-        events << createEvent(name: "hue", value: value.hue, displayed: false)
-        validValues.hue = value.hue
-    }
-    if (verifyPercent(value.saturation)) {
-        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
-        validValues.saturation = value.saturation
-    }
-    if (value.hex != null) {
-        if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
-            events << createEvent(name: "color", value: value.hex)
-            validValues.hex = value.hex
-        } else {
-            log.warn "$value.hex is not a valid color"
-        }
-    }
-    if (verifyPercent(value.level)) {
-        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
-        validValues.level = value.level
-    }
-    if (value.switch == "off" || (value.level != null && value.level <= 0)) {
-        events << createEvent(name: "switch", value: "off")
-        validValues.switch = "off"
-    } else {
-        events << createEvent(name: "switch", value: "on")
-        validValues.switch = "on"
-    }
-    if (!events.isEmpty()) {
-        parent.setColor(this, validValues)
-    }
-    events.each {
-        sendEvent(it)
-    }
-}
-
-void reset() {
-    log.debug "Executing 'reset'"
-    def value = [level:100, saturation:56, hue:23]
-    setAdjustedColor(value)
-    parent.poll()
-}
-
-void setAdjustedColor(value) {
-    if (value) {
-        log.trace "setAdjustedColor: ${value}"
-        def adjusted = value + [:]
-        adjusted.hue = adjustOutgoingHue(value.hue)
-        // Needed because color picker always sends 100
-        adjusted.level = null
-        setColor(adjusted)
-    } else {
-        log.warn "Invalid color input"
-    }
-}
-
-void setColorTemperature(value) {
-    if (value) {
-        log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
-        sendEvent(name: "switch", value: "on")
-    } else {
-        log.warn "Invalid color temperature"
-    }
-}
-
-void refresh() {
-    log.debug "Executing 'refresh'"
-    parent.manualRefresh()
-}
-
-def adjustOutgoingHue(percent) {
-	def adjusted = percent
-	if (percent > 31) {
-		if (percent < 63.0) {
-			adjusted = percent + (7 * (percent -30 ) / 32)
-		}
-		else if (percent < 73.0) {
-			adjusted = 69 + (5 * (percent - 62) / 10)
-		}
-		else {
-			adjusted = percent + (2 * (100 - percent) / 28)
-		}
-	}
-	log.info "percent: $percent, adjusted: $adjusted"
-	adjusted
-}
-
-def verifyPercent(percent) {
-    if (percent == null)
-        return false
-    else if (percent >= 0 && percent <= 100) {
-        return true
-    } else {
-        log.warn "$percent is not 0-100"
-        return false
-    }
-}

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -17,13 +17,16 @@ metadata {
 
 	tiles(scale: 2) {
      	multiAttributeTile(name:"rich-control"){
-			tileAttribute ("", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 	            attributeState "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#F3C200"
-			}
+			}    
 	        tileAttribute ("serialNumber", key: "SECONDARY_CONTROL") {
 	            attributeState "default", label:'SN: ${currentValue}'
-			}
-        }
+			}    
+        }    
+		standardTile("icon", "icon", width: 1, height: 1, canChangeIcon: false, inactiveLabel: true, canChangeBackground: false) {
+			state "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#FFFFFF"
+		}
 		valueTile("serialNumber", "device.serialNumber", decoration: "flat", height: 1, width: 2, inactiveLabel: false) {
 			state "default", label:'SN: ${currentValue}'
 		}
@@ -31,7 +34,7 @@ metadata {
 			state "default", label:'${currentValue}', height: 1, width: 2, inactiveLabel: false
 		}
 
-		main (["rich-control"])
+		main (["icon"])
 		details(["rich-control", "networkAddress"])
 	}
 }
@@ -72,7 +75,6 @@ def parse(description) {
 				}
 				else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
-                    parent.hubVerification(device.hub.id, msg.body)
 				}
 			}
 		}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -1,11 +1,8 @@
 /**
  *  Hue Bulb
  *
- *  Philips Hue Type "Extended Color Light"
- *
  *  Author: SmartThings
  */
-
 // for the UI
 metadata {
 	// Automatically generated. Make future change here.
@@ -46,10 +43,16 @@ metadata {
 			}
 		}
 
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+		}
+
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
-
         valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "colorTemperature", label: '${currentValue} K'
         }
@@ -57,12 +60,29 @@ metadata {
 		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
-
-		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("refresh", "device.switch", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+			state "level", label: 'Level ${currentValue}%'
+		}
+		controlTile("saturationSliderControl", "device.saturation", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "saturation", action:"color control.setSaturation"
+		}
+		valueTile("saturation", "device.saturation", inactiveLabel: false, decoration: "flat") {
+			state "saturation", label: 'Sat ${currentValue}    '
+		}
+		controlTile("hueSliderControl", "device.hue", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "hue", action:"color control.setHue"
+		}
+		valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
+			state "hue", label: 'Hue ${currentValue}   '
+		}
 
-		main(["rich-control"])
+		main(["switch"])
 		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
 	}
 }
@@ -71,13 +91,11 @@ metadata {
 def parse(description) {
 	log.debug "parse() - $description"
 	def results = []
-
 	def map = description
 	if (description instanceof String)  {
 		log.debug "Hue Bulb stringToMap - ${map}"
 		map = stringToMap(description)
 	}
-
 	if (map?.name && map?.value) {
 		results << createEvent(name: "${map?.name}", value: "${map?.value}")
 	}
@@ -107,104 +125,62 @@ void nextLevel() {
 }
 
 void setLevel(percent) {
-    log.debug "Executing 'setLevel'"
-    if (verifyPercent(percent)) {
-        parent.setLevel(this, percent)
-        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
-        sendEvent(name: "switch", value: "on")
-    }
+	log.debug "Executing 'setLevel'"
+	parent.setLevel(this, percent)
+	sendEvent(name: "level", value: percent)
 }
 
 void setSaturation(percent) {
-    log.debug "Executing 'setSaturation'"
-    if (verifyPercent(percent)) {
-        parent.setSaturation(this, percent)
-        sendEvent(name: "saturation", value: percent, displayed: false)
-    }
+	log.debug "Executing 'setSaturation'"
+	parent.setSaturation(this, percent)
+	sendEvent(name: "saturation", value: percent)
 }
 
 void setHue(percent) {
-    log.debug "Executing 'setHue'"
-    if (verifyPercent(percent)) {
-        parent.setHue(this, percent)
-        sendEvent(name: "hue", value: percent, displayed: false)
-    }
+	log.debug "Executing 'setHue'"
+	parent.setHue(this, percent)
+	sendEvent(name: "hue", value: percent)
 }
 
 void setColor(value) {
-    log.debug "setColor: ${value}, $this"
-    def events = []
-    def validValues = [:]
-
-    if (verifyPercent(value.hue)) {
-        events << createEvent(name: "hue", value: value.hue, displayed: false)
-        validValues.hue = value.hue
-    }
-    if (verifyPercent(value.saturation)) {
-        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
-        validValues.saturation = value.saturation
-    }
-    if (value.hex != null) {
-        if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
-            events << createEvent(name: "color", value: value.hex)
-            validValues.hex = value.hex
-        } else {
-            log.warn "$value.hex is not a valid color"
-        }
-    }
-    if (verifyPercent(value.level)) {
-        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
-        validValues.level = value.level
-    }
-    if (value.switch == "off" || (value.level != null && value.level <= 0)) {
-        events << createEvent(name: "switch", value: "off")
-        validValues.switch = "off"
-    } else {
-        events << createEvent(name: "switch", value: "on")
-        validValues.switch = "on"
-    }
-    if (!events.isEmpty()) {
-        parent.setColor(this, validValues)
-    }
-    events.each {
-        sendEvent(it)
-    }
+	log.debug "setColor: ${value}, $this"
+	parent.setColor(this, value)
+	if (value.hue) { sendEvent(name: "hue", value: value.hue)}
+	if (value.saturation) { sendEvent(name: "saturation", value: value.saturation)}
+	if (value.hex) { sendEvent(name: "color", value: value.hex)}
+	if (value.level) { sendEvent(name: "level", value: value.level)}
+	if (value.switch) { sendEvent(name: "switch", value: value.switch)}
 }
 
 void reset() {
-    log.debug "Executing 'reset'"
-    def value = [level:100, saturation:56, hue:23]
+	log.debug "Executing 'reset'"
+    def value = [level:100, hex:"#90C638", saturation:56, hue:23]
     setAdjustedColor(value)
-    parent.poll()
+	parent.poll()
 }
 
 void setAdjustedColor(value) {
-    if (value) {
+	if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
         adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
         adjusted.level = null
         setColor(adjusted)
-    } else {
-        log.warn "Invalid color input"
     }
 }
 
 void setColorTemperature(value) {
-    if (value) {
+	if (value) {
         log.trace "setColorTemperature: ${value}k"
         parent.setColorTemperature(this, value)
         sendEvent(name: "colorTemperature", value: value)
-        sendEvent(name: "switch", value: "on")
-    } else {
-        log.warn "Invalid color temperature"
-    }
+	}
 }
 
 void refresh() {
-    log.debug "Executing 'refresh'"
-    parent.manualRefresh()
+	log.debug "Executing 'refresh'"
+	parent.manualRefresh()
 }
 
 def adjustOutgoingHue(percent) {
@@ -223,14 +199,3 @@ def adjustOutgoingHue(percent) {
 	log.info "percent: $percent, adjusted: $adjusted"
 	adjusted
 }
-
-def verifyPercent(percent) {
-    if (percent == null)
-        return false
-    else if (percent >= 0 && percent <= 100) {
-        return true
-    } else {
-        log.warn "$percent is not 0-100"
-        return false
-    }
-}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -1,8 +1,6 @@
 /**
  *  Hue Lux Bulb
  *
- *  Philips Hue Type "Dimmable Light"
- *
  *  Author: SmartThings
  */
 // for the UI
@@ -11,6 +9,7 @@ metadata {
 	definition (name: "Hue Lux Bulb", namespace: "smartthings", author: "SmartThings") {
 		capability "Switch Level"
 		capability "Actuator"
+		capability "Color Temperature"
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
@@ -38,16 +37,30 @@ metadata {
 			}
         }
 
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+        }
+
         controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
             state "level", action:"switch level.setLevel"
         }
 
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 
-        main(["rich-control"])
-        details(["rich-control", "refresh"])
+        main(["switch"])
+        details(["rich-control", "colorTempSliderControl", "colorTemp", "refresh"])
     }
 }
 
@@ -70,24 +83,27 @@ def parse(description) {
 
 // handle commands
 void on() {
-	log.trace parent.on(this)
+	parent.on(this)
 	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
-	log.trace parent.off(this)
+	parent.off(this)
 	sendEvent(name: "switch", value: "off")
 }
 
 void setLevel(percent) {
 	log.debug "Executing 'setLevel'"
-    if (percent != null && percent >= 0 && percent <= 100) {
-		parent.setLevel(this, percent)
-		sendEvent(name: "level", value: percent)
-		sendEvent(name: "switch", value: "on")
-	} else {
-    	log.warn "$percent is not 0-100"
-    }
+	parent.setLevel(this, percent)
+	sendEvent(name: "level", value: percent)
+}
+
+void setColorTemperature(value) {
+	if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+	}
 }
 
 void refresh() {

devicetypes/smartthings/mobile-presence.src/i18n/messages.properties

@@ -19,14 +19,13 @@
 #
 # Change History:
 #	1. 20160205 TW Initial release with informal Korean translation.
-#	2. 20160224 TW Updated with formal Korean translation.
 #==============================================================================
 # Korean (ko)
 # Device Preferences
-'''Give your device a name'''.ko=기기 이름 설정
-'''Set Device Image'''.ko=기기 이미지 설정
+'''Give your device a name'''.ko=기기 이름 바꾸기
+'''Set Device Image'''.ko=디바이스 이미지 설정
 # Events / Notifications
-'''{{ linkText }} has left'''.ko={{ linkText }} 외출
-'''{{ linkText }} has arrived'''.ko={{ linkText }} 귀가
+'''{{ linkText }} has left'''.ko={{ linkText }}님이 나갔습니다
+'''{{ linkText }} has arrived'''.ko={{ linkText }}님이 도착했습니다
 '''present'''.ko=집안
-'''not present'''.ko=외출
+'''not present'''.ko=부재중

devicetypes/smartthings/mobile-presence.src/mobile-presence.groovy

@@ -1,28 +1,16 @@
-/*
-===============================================================================
- *  Copyright 2016 SmartThings
+/**
+ *  Copyright 2015 SmartThings
  *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
- *  use this file except in compliance with the License. You may obtain a copy 
- *  of the License at:
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software 
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
- *  License for the specific language governing permissions and limitations 
- *  under the License.
-===============================================================================
- *  Purpose: Mobile Presence DTH File
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
  *
- *  Filename: mobile-presence.src/mobile-presence.groovy
- *
- *  Change History:
- *  1. 20160205 TW - Update/Edit to support i18n translations
-===============================================================================
  */
- 
 metadata {
 	definition (name: "Mobile Presence", namespace: "smartthings", author: "SmartThings") {
 		capability "Presence Sensor"
@@ -53,7 +41,6 @@ def parse(String description) {
 	def isStateChange = isStateChange(device, name, value)
 
 	def results = [
-    	translatable: true,
 		name: name,
 		value: value,
 		unit: null,
@@ -85,8 +72,8 @@ private String parseValue(String description) {
 
 private parseDescriptionText(String linkText, String value, String description) {
 	switch(value) {
-		case "present": return "{{ linkText }} has arrived"
-		case "not present": return "{{ linkText }} has left"
+		case "present": return "$linkText has arrived"
+		case "not present": return "$linkText has left"
 		default: return value
 	}
 }
@@ -97,4 +84,4 @@ private getState(String value) {
 		case "not present": return "left"
 		default: return value
 	}
-}
+}

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -24,7 +24,6 @@ metadata {
         command "enrollResponse"
  
  
- 		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
 		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
         fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
         fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"

devicetypes/smartthings/smartpower-outlet.src/i18n/messages.properties

@@ -1,35 +0,0 @@
-#==============================================================================
-#  Copyright 2016 SmartThings
-#
-#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
-#  use this file except in compliance with the License. You may obtain a copy
-#  of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#  License for the specific language governing permissions and limitations
-#  under the License.
-#==============================================================================
-# Purpose: SmartPower Outlet i18n Translation File
-#
-# Filename: SmartPower-Outlet.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160116 TW Initial release with informal Korean translation.
-#==============================================================================
-# Korean (ko)
-# Device Preferences
-'''Give your device a name'''.ko=기기 이름 설정
-'''Outlet'''.ko= 스마트 플러그 
-# Events descriptionText
-'''{{ device.displayName }} is On'''.ko={{ device.displayName }} 켜짐
-'''{{ device.displayName }} is Off'''.ko={{ device.displayName }} 꺼짐
-'''{{ device.displayName }} power is {{ value }} Watts'''.ko={{ device.displayName }} 전력은 {{ value }}와트입니다.
-'''On'''.ko= 켜짐
-'''Off'''.ko=꺼짐
-'''Turning On'''.ko=켜는 중
-'''Turning Off'''.ko=끄는 중
-#==============================================================================

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -1,26 +1,19 @@
-/*
-===============================================================================
- *  Copyright 2016 SmartThings
+/**
+ *  Copyright 2015 SmartThings
  *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
- *  use this file except in compliance with the License. You may obtain a copy
- *  of the License at:
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
- *  License for the specific language governing permissions and limitations
- *  under the License.
-===============================================================================
- *  Purpose: SmartPower Outlet DTH File
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
  *
- *  Filename: SmartPower-Outlet.src/SmartPower-Outlet.groovy
+ *	SmartPower Outlet (CentraLite)
  *
- *  Change History:
- *  1. 20160117 TW - Update/Edit to support i18n translations
-===============================================================================
+ *	Author: SmartThings
+ *	Date: 2015-08-23
  */
 metadata {
 	// Automatically generated. Make future change here.
@@ -31,7 +24,6 @@ metadata {
 		capability "Configuration"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Health Check"
 
 		// indicates that device keeps track of heartbeat (in state.heartbeat)
 		attribute "heartbeat", "string"
@@ -66,10 +58,10 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: 'On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
-				attributeState "off", label: 'Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
-				attributeState "turningOn", label: 'Turning On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
-				attributeState "turningOff", label: 'Turning Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
 			}
 			tileAttribute ("power", key: "SECONDARY_CONTROL") {
 				attributeState "power", label:'${currentValue} W'
@@ -99,22 +91,22 @@ def parse(String description) {
 		finalResult = getPowerDescription(zigbee.parseDescriptionAsMap(description))
 
 	if (finalResult) {
-		log.info "final result = $finalResult"
+		log.info finalResult
 		if (finalResult.type == "update") {
 			log.info "$device updates: ${finalResult.value}"
 		}
 		else if (finalResult.type == "power") {
 			def powerValue = (finalResult.value as Integer)/10
-			sendEvent(name: "power", value: powerValue, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true )
+			sendEvent(name: "power", value: powerValue)
 			/*
 				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+
 				power level is an integer. The exact power level with correct units needs to be handled in the device type
 				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
 			*/
 		}
 		else {
-			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
-			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
+			sendEvent(name: finalResult.type, value: finalResult.value)
 		}
 	}
 	else {

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -1,44 +1,14 @@
-#==============================================================================
-#  Copyright 2016 SmartThings
-#
-#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
-#  use this file except in compliance with the License. You may obtain a copy
-#  of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#  License for the specific language governing permissions and limitations
-#  under the License.
-#==============================================================================
-# Purpose: SmartSense Moisture Sensor i18n Translation File
-#
-# Filename: SmartSense-Moisture-Sensor.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160116 TW Initial release with formal Korean translation.
-#==============================================================================
-# Korean (ko)
-# Device Preferences
-'''Dry'''.ko=건조
-'''Wet'''.ko=누수
+
+# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
+'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
+'''Degrees'''.ko=온도
+'''Temperature Offset'''.ko=온도 직접 설정
+'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다. 
+'''battery'''.ko=배터리
 '''dry'''.ko=건조
 '''wet'''.ko=누수
-'''battery'''.ko=배터리
-'''Temperature Offset'''.ko=온도 직접 설정
-'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
-'''Degrees'''.ko=온도
-'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Give your device a name'''.ko=기기 이름 설정
-'''Water Leak Sensor'''.ko=누수감지 센서
-'''${currentValue}% battery'''.ko=${currentValue}% 배터리
-# Events descriptionText
-'''{{ device.displayName }} is dry'''.ko={{ device.displayName }}가 건조
-'''{{ device.displayName }} is wet'''.ko={{ device.displayName }}누수
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
-'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
 '''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
-#==============================================================================
+'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }} 배터리가 {{ value }}였습니다
+'''{{ device.displayName }} is {{ value | translate }}'''.ko={{ device.displayName }}이(가) {{ value | translate }}입니다
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
+'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -1,29 +1,18 @@
-/*
-===============================================================================
- *  Copyright 2016 SmartThings
+/**
+ *  SmartSense Moisture Sensor
  *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
- *  use this file except in compliance with the License. You may obtain a copy
- *  of the License at:
+ *  Copyright 2014 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
- *  License for the specific language governing permissions and limitations
- *  under the License.
-===============================================================================
- *  Purpose: SmartSense Moisture Sensor DTH File
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
  *
- *  Filename: SmartSense-Moisture-Sensor.src/SmartSense-Moisture-Sensor.groovy
- *
- *  Change History:
- *  1. 20160116 TW - Update/Edit to support i18n translations
- *  2. 20160125 TW = Incorporated new battery mapping from TM
-===============================================================================
  */
-
 metadata {
 	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
@@ -31,7 +20,6 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
-		capability "Health Check"
 
 		command "enrollResponse"
 
@@ -55,7 +43,7 @@ metadata {
 				])
 		}
 		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 	}
@@ -128,16 +116,16 @@ private Map parseCatchAllMessage(String description) {
 				resultMap = getBatteryResult(cluster.data.last())
 				break
 
-            case 0x0402:
-                // temp is last 2 data values. reverse to swap endian
-                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-                def value = getTemperature(temp)
-                resultMap = getTemperatureResult(value)
-                break
-        }
-    }
+			case 0x0402:
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
+				break
+		}
+	}
 
-    return resultMap
+	return resultMap
 }
 
 private boolean shouldProcessMessage(cluster) {
@@ -232,8 +220,7 @@ private Map getBatteryResult(rawValue) {
 
 	def result = [
 		name: 'battery',
-		value: '--',
-		translatable: true
+		value: '--'
 	]
 
 	def volts = rawValue / 10
@@ -241,7 +228,7 @@ private Map getBatteryResult(rawValue) {
 	if (rawValue == 0 || rawValue == 255) {}
 	else {
 		if (volts > 3.5) {
-			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
+			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
 		}
 		else {
 			if (device.getDataValue("manufacturer") == "SmartThings") {
@@ -258,7 +245,7 @@ private Map getBatteryResult(rawValue) {
 				def pct = batteryMap[volts]
 				if (pct != null) {
 					result.value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+					result.descriptionText = "${linkText} battery was ${result.value}%"
 				}
 			}
 			else {
@@ -266,7 +253,7 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+				result.descriptionText = "${linkText} battery was ${result.value}%"
 			}
 		}
 	}
@@ -276,37 +263,27 @@ private Map getBatteryResult(rawValue) {
 
 private Map getTemperatureResult(value) {
 	log.debug 'TEMP'
+	def linkText = getLinkText(device)
 	if (tempOffset) {
 		def offset = tempOffset as int
 		def v = value as int
 		value = v + offset
 	}
-    def descriptionText
-    if ( temperatureScale == 'C' )
-    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
-    else
-    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
-
+	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText,
-        translatable: true
+		descriptionText: descriptionText
 	]
 }
 
 private Map getMoistureResult(value) {
-	log.debug "water"
-    def descriptionText
-    if ( value == "wet" )
-    	descriptionText = '{{ device.displayName }} is wet'
-    else
-    	descriptionText = '{{ device.displayName }} is dry'
+	log.debug 'water'
+	String descriptionText = "${device.displayName} is ${value}"
 	return [
 		name: 'water',
 		value: value,
-		descriptionText: descriptionText,
-        translatable: true
+		descriptionText: descriptionText
 	]
 }
 

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -1,43 +1,13 @@
-#==============================================================================
-#  Copyright 2016 SmartThings
-#
-#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
-#  use this file except in compliance with the License. You may obtain a copy
-#  of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#  License for the specific language governing permissions and limitations
-#  under the License.
-#==============================================================================
-# Purpose: SmartSense Motion Sensor i18n Translation File
-#
-# Filename: SmartSense-Motion-Sensor.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160116 TW Initial release with formal Korean translation.
-#	2. 20160224 TW Updated formal Korean translations from Mike Stoller.
-#==============================================================================
-# Korean (ko)
-# Device Preferences
-'''battery'''.ko=배터리
-'''Temperature Offset'''.ko=온도 직접 설정
-'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
-'''Degrees'''.ko=온도
+
+# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Give your device a name'''.ko=기기 이름 설정
-'''Motion Sensor'''.ko=모션 센서
-'''motion'''.ko= 동작 감지 
-'''no motion'''.ko=동작 없음
-'''${currentValue}% battery'''.ko=${currentValue}% 배터리
-# Events descriptionText
-'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }}에서 움직임이 감지되었습니다.
-'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }}에서 움직임이 중단되었습니다.
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
-'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
+'''Degrees'''.ko=온도
+'''Temperature Offset'''.ko=온도 직접 설정
+'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다. 
+'''battery'''.ko=배터리
 '''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
-#==============================================================================
+'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }} 배터리가 {{ value }}였습니다
+'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }}가 움직임을 감지하였습니다.
+'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }} 동작이 중단되었습니다
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
+'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -1,27 +1,17 @@
-/*
-===============================================================================
- *  Copyright 2016 SmartThings
+/**
+ *  SmartSense Motion/Temp Sensor
  *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
- *  use this file except in compliance with the License. You may obtain a copy
- *  of the License at:
+ *  Copyright 2014 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
- *  License for the specific language governing permissions and limitations
- *  under the License.
-===============================================================================
- *  Purpose: SmartSense Motion Sensor DTH File
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
  *
- *  Filename: SmartSense-Motion-Sensor.src/SmartSense-Motion-Sensor.groovy
- *
- *  Change History:
- *  1. 20160116 TW - Update/Edit to support i18n translations
- *  2. 20160125 TW = Incorporated new battery mapping from TM
-===============================================================================
  */
 
 metadata {
@@ -31,7 +21,6 @@ metadata {
 		capability "Battery"
 		capability "Temperature Measurement"
 		capability "Refresh"
-		capability "Health Check"
 
 		command "enrollResponse"
 
@@ -58,7 +47,7 @@ metadata {
 				])
 		}
 		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 	}
@@ -247,8 +236,7 @@ private Map getBatteryResult(rawValue) {
 
 	def result = [
 		name: 'battery',
-		value: '--',
-		translatable: true
+		value: '--'
 	]
 
 	def volts = rawValue / 10
@@ -256,7 +244,7 @@ private Map getBatteryResult(rawValue) {
 	if (rawValue == 0 || rawValue == 255) {}
 	else {
 		if (volts > 3.5) {
-			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
+			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
 		}
 		else {
 			if (device.getDataValue("manufacturer") == "SmartThings") {
@@ -273,8 +261,7 @@ private Map getBatteryResult(rawValue) {
 				def pct = batteryMap[volts]
 				if (pct != null) {
 					result.value = pct
-                    def value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+					result.descriptionText = "${linkText} battery was ${result.value}%"
 				}
 			}
 			else {
@@ -282,7 +269,7 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+				result.descriptionText = "${linkText} battery was ${result.value}%"
 			}
 		}
 	}
@@ -292,33 +279,28 @@ private Map getBatteryResult(rawValue) {
 
 private Map getTemperatureResult(value) {
 	log.debug 'TEMP'
+	def linkText = getLinkText(device)
 	if (tempOffset) {
 		def offset = tempOffset as int
 		def v = value as int
 		value = v + offset
 	}
-    def descriptionText
-    if ( temperatureScale == 'C' )
-    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
-    else
-    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
-
+	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText,
-        translatable: true
+		descriptionText: descriptionText
 	]
 }
 
 private Map getMotionResult(value) {
 	log.debug 'motion'
-	String descriptionText = value == 'active' ? "{{ device.displayName }} detected motion" : "{{ device.displayName }} motion has stopped"
+	String linkText = getLinkText(device)
+	String descriptionText = value == 'active' ? "${linkText} detected motion" : "${linkText} motion has stopped"
 	return [
 		name: 'motion',
 		value: value,
-		descriptionText: descriptionText,
-        translatable: true
+		descriptionText: descriptionText
 	]
 }
 

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -1,50 +1,20 @@
-#==============================================================================
-#  Copyright 2016 SmartThings
-#
-#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
-#  use this file except in compliance with the License. You may obtain a copy
-#  of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#  License for the specific language governing permissions and limitations
-#  under the License.
-#==============================================================================
-# Purpose: SmartSense Multi Sensor i18n Translation File
-#
-# Filename: SmartSense-Multi-Sensor.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160117 TW Initial release with informal Korean translation.
-#==============================================================================
-# Korean (ko)
-# Device Preferences
-'''Yes'''.ko=예
+
+# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
+'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
+'''Degrees'''.ko=온도
+'''Do you want to use this sensor on a garage door?'''.ko=차고 문의 센서 사용 설정하기
 '''No'''.ko=아니요
-'''battery'''.ko=배터리
+'''Tap to set'''.ko=눌러서 설정
 '''Temperature Offset'''.ko=온도 직접 설정
 '''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
-'''Degrees'''.ko=온도
-'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Do you want to use this sensor on a garage door?'''.ko=차고 문의 센서 사용 설정하기
-'''Tap to set'''.ko=눌러서 설정
-'''Give your device a name'''.ko=기기 이름 설정
-'''Multipurpose Sensor'''.ko=문 및 창 센서
-# Events descriptionText
-'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}에서 열림이 감지되었습니다.
-'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}에서 닫힘이 감지되었습니다.
-'''{{ device.displayName }} was active'''.ko={{ device.displayName }} 활성화
-'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }} 비활성화
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
-'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
 '''Updating device to garage sensor'''.ko=기기-차고 센서 업데이트 중
 '''Updating device to open/close sensor'''.ko=기기-열림/닫힘 센서 업데이트 중
-'''Inactive'''.ko=비활성 상태
-'''Active'''.ko=활성 상태
-'''Open'''.ko= 열림이 감지될 때
-'''Closed'''.ko=닫힘
-'''${currentValue}% battery'''.ko=${currentValue}% 배터리
+'''Yes'''.ko=예
+'''{{ device.displayName }} status was closed'''.ko={{ device.displayName }}은(는) 닫힌 상태입니다
+'''{{ device.displayName }} status was opened'''.ko={{ device.displayName }}은(는) 열린 상태입니다
+'''{{ device.displayName }} was active'''.ko={{ device.displayName }}이(가) 활성화되었습니다
+'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}이(가) 닫혔습니다
+'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }}이(가) 비활성화되었습니다
+'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}이(가) 열렸습니다
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
+'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -1,27 +1,17 @@
-/*
-===============================================================================
- *  Copyright 2016 SmartThings
+/**
+ *  SmartSense Multi
  *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
- *  use this file except in compliance with the License. You may obtain a copy
- *  of the License at:
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
- *  License for the specific language governing permissions and limitations
- *  under the License.
-===============================================================================
- *  Purpose: SmartSense Multi Sensor DTH File
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
  *
- *  Filename: SmartSense-Multi-Sensor.src/SmartSense-Multi-Sensor.groovy
- *
- *  Change History:
- *  1. 20160117 TW - Update/Edit to support i18n translations
- *  2. 20160125 TW = Incorporated new battery mapping from TM
-===============================================================================
  */
 
 metadata {
@@ -35,7 +25,6 @@ metadata {
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
-		capability "Health Check"
 
  		command "enrollResponse"
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
@@ -73,30 +62,30 @@ metadata {
 				])
 		}
 		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 		section {
-			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", description: "Tap to set", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
+			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
 		}
 	}
 
 	tiles(scale: 2) {
 		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
 				attributeState "garage-open", label:'Open', icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e"
 				attributeState "garage-closed", label:'Closed', icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821"
 			}
 		}
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-			state("closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label:'Active', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'Inactive', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
+			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°',
@@ -284,19 +273,19 @@ def updated() {
 	if (garageSensor == "Yes") {
 		def descriptionText = "Updating device to garage sensor"
 		if (device.latestValue("status") == "open") {
-			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText, translatable: true)
+			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText)
 		}
 		else if (device.latestValue("status") == "closed") {
-			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText, translatable: true)
+			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText)
 		}
 	}
 	else {
 		def descriptionText = "Updating device to open/close sensor"
 		if (device.latestValue("status") == "garage-open") {
-			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText, translatable: true)
+			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText)
 		}
 		else if (device.latestValue("status") == "garage-closed") {
-			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText, translatable: true)
+			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText)
 		}
 	}
 }
@@ -312,11 +301,11 @@ def getTemperature(value) {
 
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
+	def linkText = getLinkText(device)
 
 	def result = [
 		name: 'battery',
-		value: '--',
-		translatable: true
+		value: '--'
 	]
 
 	def volts = rawValue / 10
@@ -324,7 +313,7 @@ private Map getBatteryResult(rawValue) {
 	if (rawValue == 0 || rawValue == 255) {}
 	else {
 		if (volts > 3.5) {
-			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
+			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
 		}
 		else {
 			if (device.getDataValue("manufacturer") == "SmartThings") {
@@ -341,7 +330,7 @@ private Map getBatteryResult(rawValue) {
 				def pct = batteryMap[volts]
 				if (pct != null) {
 					result.value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+					result.descriptionText = "${linkText} battery was ${result.value}%"
 				}
 			}
 			else {
@@ -349,7 +338,7 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+				result.descriptionText = "${linkText} battery was ${result.value}%"
 			}
 		}
 	}
@@ -359,50 +348,40 @@ private Map getBatteryResult(rawValue) {
 
 private Map getTemperatureResult(value) {
 	log.debug "Temperature"
+	def linkText = getLinkText(device)
 	if (tempOffset) {
 		def offset = tempOffset as int
 		def v = value as int
 		value = v + offset
 	}
-	def descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C':
-			'{{ device.displayName }} was {{ value }}°F'
-
+	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
 	return [
 	name: 'temperature',
 	value: value,
-	descriptionText: descriptionText,
-    translatable: true
+	descriptionText: descriptionText
 	]
 }
 
 private Map getContactResult(value) {
-	log.debug "Contact: ${device.displayName} value = ${value}"
-	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
-	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
-	sendEvent(name: 'status', value: value, descriptionText: descriptionText, translatable: true)
+	log.debug "Contact"
+	def linkText = getLinkText(device)
+	def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
+	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed:false)
+	sendEvent(name: 'status', value: value, descriptionText: descriptionText)
 }
 
 private getAccelerationResult(numValue) {
 	log.debug "Acceleration"
 	def name = "acceleration"
-    def value
-    def descriptionText
-
-	if ( numValue.endsWith("1") ) {
-    	value = "active"
-        descriptionText = '{{ device.displayName }} was active'
-    } else {
-    	value = "inactive"
-        descriptionText = '{{ device.displayName }} was inactive'
-    }
-
+	def value = numValue.endsWith("1") ? "active" : "inactive"
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText was $value"
 	def isStateChange = isStateChange(device, name, value)
-	return [
+	[
 		name: name,
 		value: value,
 		descriptionText: descriptionText,
-		isStateChange: isStateChange,
-		translatable: true
+		isStateChange: isStateChange
 	]
 }
 
@@ -472,15 +451,15 @@ def configure() {
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 		]
 
@@ -549,9 +528,10 @@ def garageEvent(zValue) {
 		garageValue = 'garage-open'
 	}
 	if (contactValue != null){
-		def descriptionText = contactValue == 'open' ? '{{ device.displayName }} was opened' :'{{ device.displayName }} was closed'
-		sendEvent(name: 'contact', value: contactValue, descriptionText: descriptionText, displayed:false, translatable: true)
-		sendEvent(name: 'status', value: garageValue, descriptionText: descriptionText, translatable: true)
+		def linkText = getLinkText(device)
+		def descriptionText = "${linkText} was ${contactValue == 'open' ? 'opened' : 'closed'}"
+		sendEvent(name: 'contact', value: contactValue, descriptionText: descriptionText, displayed:false)
+		sendEvent(name: 'status', value: garageValue, descriptionText: descriptionText)
 	}
 }
 

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -22,8 +22,6 @@ metadata {
 		capability "Battery"
 
 		fingerprint profileId: "FC01", deviceId: "0139"
-
-		attribute "status", "string"
 	}
 
 	simulator {
@@ -101,7 +99,7 @@ def parse(String description) {
 
 }
 
-private List parseSingleMessage(description) {
+private Map parseSingleMessage(description) {
 
 	def name = parseName(description)
 	def value = parseValue(description)
@@ -110,9 +108,8 @@ private List parseSingleMessage(description) {
 	def handlerName = value == 'open' ? 'opened' : value
 	def isStateChange = isStateChange(device, name, value)
 
-	def results = []
-	results << createEvent(
-		name: "contact",
+	def results = [
+		name: name,
 		value: value,
 		unit: null,
 		linkText: linkText,
@@ -120,18 +117,8 @@ private List parseSingleMessage(description) {
 		handlerName: handlerName,
 		isStateChange: isStateChange,
 		displayed: displayed(description, isStateChange)
-	)
-
-	results << createEvent(
-		name: "status",
-		value: value,
-		unit: null,
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: handlerName,
-		isStateChange: isStateChange,
-		displayed: displayed(description, isStateChange)
-	)
+	]
+	log.debug "Parse results for $device: $results"
 
 	results
 }
@@ -203,7 +190,7 @@ private List parseContactMessage(String description) {
 	parts.each { part ->
 		part = part.trim()
 		if (part.startsWith('contactState:')) {
-			results.addAll(getContactResult(part, description))
+			results << getContactResult(part, description)
 		}
 		else if (part.startsWith('accelerationState:')) {
 			results << getAccelerationResult(part, description)
@@ -282,7 +269,7 @@ private List parseRssiLqiMessage(String description) {
 	results
 }
 
-private List getContactResult(part, description) {
+private getContactResult(part, description) {
 	def name = "contact"
 	def value = part.endsWith("1") ? "open" : "closed"
 	def handlerName = value == 'open' ? 'opened' : value
@@ -290,33 +277,19 @@ private List getContactResult(part, description) {
 	def descriptionText = "$linkText was $handlerName"
 	def isStateChange = isStateChange(device, name, value)
 
-	def results = []
-	results << createEvent(
-			name: "contact",
-			value: value,
-			unit: null,
-			linkText: linkText,
-			descriptionText: descriptionText,
-			handlerName: handlerName,
-			isStateChange: isStateChange,
-			displayed:false
-	)
-
-	results << createEvent(
-			name: "status",
-			value: value,
-			unit: null,
-			linkText: linkText,
-			descriptionText: descriptionText,
-			handlerName: handlerName,
-			isStateChange: isStateChange,
-			displayed: displayed(description, isStateChange)
-	)
-
-	results
+	[
+		name: name,
+		value: value,
+		unit: null,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: handlerName,
+		isStateChange: isStateChange,
+		displayed: displayed(description, isStateChange)
+	]
 }
 
-private Map getAccelerationResult(part, description) {
+private getAccelerationResult(part, description) {
 	def name = "acceleration"
 	def value = part.endsWith("1") ? "active" : "inactive"
 	def linkText = getLinkText(device)
@@ -335,7 +308,7 @@ private Map getAccelerationResult(part, description) {
 	]
 }
 
-private Map getTempResult(part, description) {
+private getTempResult(part, description) {
 	def name = "temperature"
 	def temperatureScale = getTemperatureScale()
 	def value = zigbee.parseSmartThingsTemperatureValue(part, "temp: ", temperatureScale)
@@ -360,7 +333,7 @@ private Map getTempResult(part, description) {
 	]
 }
 
-private Map getXyzResult(results, description) {
+private getXyzResult(results, description) {
 	def name = "threeAxis"
 	def value = "${results.x},${results.y},${results.z}"
 	def linkText = getLinkText(device)
@@ -379,7 +352,7 @@ private Map getXyzResult(results, description) {
 	]
 }
 
-private Map getBatteryResult(part, description) {
+private getBatteryResult(part, description) {
 	def batteryDivisor = description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"} ? description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"}.split(":")[1].trim() : null
 	def name = "battery"
 	def value = zigbee.parseSmartThingsBatteryValue(part, batteryDivisor)
@@ -400,7 +373,7 @@ private Map getBatteryResult(part, description) {
 	]
 }
 
-private Map getRssiResult(part, description, lastHop=false) {
+private getRssiResult(part, description, lastHop=false) {
 	def name = lastHop ? "lastHopRssi" : "rssi"
 	def valueString = part.split(":")[1].trim()
 	def value = (Integer.parseInt(valueString) - 128).toString()
@@ -431,7 +404,7 @@ private Map getRssiResult(part, description, lastHop=false) {
  * Note: To make the signal strength indicator more accurate, we could combine
  * LQI with RSSI.
  */
-private Map getLqiResult(part, description, lastHop=false) {
+private getLqiResult(part, description, lastHop=false) {
 	def name = lastHop ? "lastHopLqi" : "lqi"
 	def valueString = part.split(":")[1].trim()
 	def percentageOf = 255
@@ -476,7 +449,6 @@ private Boolean isOrientationMessage(String description) {
 	description ==~ /x:.*y:.*z:.*rssi:.*lqi:.*/
 }
 
-//Note: Not using this method anymore
 private String parseName(String description) {
 	if (isSupportedDescription(description)) {
 		return "contact"

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -23,9 +23,8 @@
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
-		capability "Health Check"
+ 		command "enrollResponse"
 
-		command "enrollResponse"
  	}
 
  	simulator {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Relative Humidity Measurement"
-		capability "Health Check"
 
 		fingerprint endpointId: "01", inClusters: "0001,0003,0020,0402,0B05,FC45", outClusters: "0019,0003"
 	}

devicetypes/smartthings/testing/simulated-thermostat.src/simulated-thermostat.groovy

@@ -32,15 +32,14 @@ metadata {
 				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
-				attributeState("VALUE_UP", action: "tempUp")
-				attributeState("VALUE_DOWN", action: "tempDown")
+				attributeState("default", action: "setTemperature")
 			}
 			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
 				attributeState("default", label:'${currentValue}%', unit:"%")
 			}
 			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
 				attributeState("idle", backgroundColor:"#44b621")
-				attributeState("heating", backgroundColor:"#ea5462")
+				attributeState("heating", backgroundColor:"#ffa81e")
 				attributeState("cooling", backgroundColor:"#269bd2")
 			}
 			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {

devicetypes/smartthings/tile-ux/tile-basic-carousel.src/tile-basic-carousel.groovy

@@ -1,225 +0,0 @@
-/**
- *  Copyright 2016 SmartThings, Inc.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (
-		name: "carouselDeviceTile",
-		namespace: "smartthings/tile-ux",
-		author: "SmartThings") {
-
-		capability "Thermostat"
-		capability "Relative Humidity Measurement"
-
-		command "tempUp"
-		command "tempDown"
-		command "heatUp"
-		command "heatDown"
-		command "coolUp"
-		command "coolDown"
-		command "setTemperature", ["number"]
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"thermostatMulti", type:"thermostat", width:6, height:4) {
-			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
-				attributeState("default", action: "setTemperature")
-			}
-			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
-				attributeState("default", label:'${currentValue}%', unit:"%")
-			}
-			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
-				attributeState("idle", backgroundColor:"#44b621")
-				attributeState("heating", backgroundColor:"#ffa81e")
-				attributeState("cooling", backgroundColor:"#269bd2")
-			}
-			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
-				attributeState("off", label:'${name}')
-				attributeState("heat", label:'${name}')
-				attributeState("cool", label:'${name}')
-				attributeState("auto", label:'${name}')
-			}
-			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-		}
-
-		main("thermostatMulti")
-		details([
-			"thermostatMulti"
-		])
-	}
-}
-
-def installed() {
-	sendEvent(name: "temperature", value: 72, unit: "F")
-	sendEvent(name: "heatingSetpoint", value: 70, unit: "F")
-	sendEvent(name: "thermostatSetpoint", value: 70, unit: "F")
-	sendEvent(name: "coolingSetpoint", value: 76, unit: "F")
-	sendEvent(name: "thermostatMode", value: "off")
-	sendEvent(name: "thermostatFanMode", value: "fanAuto")
-	sendEvent(name: "thermostatOperatingState", value: "idle")
-	sendEvent(name: "humidity", value: 53, unit: "%")
-}
-
-def parse(String description) {
-}
-
-def evaluate(temp, heatingSetpoint, coolingSetpoint) {
-	log.debug "evaluate($temp, $heatingSetpoint, $coolingSetpoint"
-	def threshold = 1.0
-	def current = device.currentValue("thermostatOperatingState")
-	def mode = device.currentValue("thermostatMode")
-
-	def heating = false
-	def cooling = false
-	def idle = false
-	if (mode in ["heat","emergency heat","auto"]) {
-		if (heatingSetpoint - temp >= threshold) {
-			heating = true
-			sendEvent(name: "thermostatOperatingState", value: "heating")
-		}
-		else if (temp - heatingSetpoint >= threshold) {
-			idle = true
-		}
-		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
-	}
-	if (mode in ["cool","auto"]) {
-		if (temp - coolingSetpoint >= threshold) {
-			cooling = true
-			sendEvent(name: "thermostatOperatingState", value: "cooling")
-		}
-		else if (coolingSetpoint - temp >= threshold && !heating) {
-			idle = true
-		}
-		sendEvent(name: "thermostatSetpoint", value: coolingSetpoint)
-	}
-	else {
-		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
-	}
-	if (idle && !heating && !cooling) {
-		sendEvent(name: "thermostatOperatingState", value: "idle")
-	}
-}
-
-def setHeatingSetpoint(Double degreesF) {
-	log.debug "setHeatingSetpoint($degreesF)"
-	sendEvent(name: "heatingSetpoint", value: degreesF)
-	evaluate(device.currentValue("temperature"), degreesF, device.currentValue("coolingSetpoint"))
-}
-
-def setCoolingSetpoint(Double degreesF) {
-	log.debug "setCoolingSetpoint($degreesF)"
-	sendEvent(name: "coolingSetpoint", value: degreesF)
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), degreesF)
-}
-
-def setThermostatMode(String value) {
-	sendEvent(name: "thermostatMode", value: value)
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def setThermostatFanMode(String value) {
-	sendEvent(name: "thermostatFanMode", value: value)
-}
-
-def off() {
-	sendEvent(name: "thermostatMode", value: "off")
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def heat() {
-	sendEvent(name: "thermostatMode", value: "heat")
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def auto() {
-	sendEvent(name: "thermostatMode", value: "auto")
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def emergencyHeat() {
-	sendEvent(name: "thermostatMode", value: "emergency heat")
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def cool() {
-	sendEvent(name: "thermostatMode", value: "cool")
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def fanOn() {
-	sendEvent(name: "thermostatFanMode", value: "fanOn")
-}
-
-def fanAuto() {
-	sendEvent(name: "thermostatFanMode", value: "fanAuto")
-}
-
-def fanCirculate() {
-	sendEvent(name: "thermostatFanMode", value: "fanCirculate")
-}
-
-def tempUp() {
-	def ts = device.currentState("temperature")
-	def value = ts ? ts.integerValue + 1 : 72
-	sendEvent(name:"temperature", value: value)
-	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def tempDown() {
-	def ts = device.currentState("temperature")
-	def value = ts ? ts.integerValue - 1 : 72
-	sendEvent(name:"temperature", value: value)
-	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def setTemperature(value) {
-	def ts = device.currentState("temperature")
-	sendEvent(name:"temperature", value: value)
-	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def heatUp() {
-	def ts = device.currentState("heatingSetpoint")
-	def value = ts ? ts.integerValue + 1 : 68
-	sendEvent(name:"heatingSetpoint", value: value)
-	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
-}
-
-def heatDown() {
-	def ts = device.currentState("heatingSetpoint")
-	def value = ts ? ts.integerValue - 1 : 68
-	sendEvent(name:"heatingSetpoint", value: value)
-	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
-}
-
-
-def coolUp() {
-	def ts = device.currentState("coolingSetpoint")
-	def value = ts ? ts.integerValue + 1 : 76
-	sendEvent(name:"coolingSetpoint", value: value)
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
-}
-
-def coolDown() {
-	def ts = device.currentState("coolingSetpoint")
-	def value = ts ? ts.integerValue - 1 : 76
-	sendEvent(name:"coolingSetpoint", value: value)
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
-}

devicetypes/smartthings/tile-ux/tile-basic-colorwheel.src/tile-basic-colorwheel.groovy

@@ -1,52 +0,0 @@
-/**
- *  Copyright 2016 SmartThings, Inc.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (
-		name: "colorWheelDeviceTile",
-		namespace: "smartthings/tile-ux",
-		author: "SmartThings") {
-
-		capability "Color Control"
-	}
-
-	tiles(scale: 2) {
-		valueTile("currentColor", "device.color") {
-			state "default", label: '${currentValue}'
-		}
-
-		controlTile("rgbSelector", "device.color", "color", height: 6, width: 6, inactiveLabel: false) {
-			state "color", action: "color control.setColor"
-		}
-
-		main("currentColor")
-		details([
-			"rgbSelector"
-		])
-	}
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"
-}
-
-def setSaturation(percent) {
-	log.debug "Executing 'setSaturation'"
-	sendEvent(name: "saturation", value: percent)
-}
-
-def setHue(percent) {
-	log.debug "Executing 'setHue'"
-	sendEvent(name: "hue", value: percent)
-}

devicetypes/smartthings/tile-ux/tile-basic-presence.src/tile-basic-presence.groovy

@@ -1,63 +0,0 @@
-/**
- *  Copyright 2016 SmartThings, Inc.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (
-		name: "presenceDeviceTile",
-		namespace: "smartthings/tile-ux",
-		author: "SmartThings") {
-
-		capability "Presence Sensor"
-
-		command "arrived"
-		command "departed"
-	}
-
-	tiles(scale: 2) {
-		// You only get a presence tile view when the size is 3x3 otherwise it's a value tile
-		standardTile("presence", "device.presence", width: 3, height: 3, canChangeBackground: true) {
-			state("present", labelIcon:"st.presence.tile.mobile-present", backgroundColor:"#53a7c0")
-			state("not present", labelIcon:"st.presence.tile.mobile-not-present", backgroundColor:"#ebeef2")
-		}
-
-		standardTile("notPresentBtn", "device.fake", width: 3, height: 3, decoration: "flat") {
-			state("not present", label:'not present', backgroundColor:"#ffffff", action:"departed")
-		}
-
-		standardTile("presentBtn", "device.fake", width: 3, height: 3, decoration: "flat") {
-			state("present", label:'present', backgroundColor:"#53a7c0", action:"arrived")
-		}
-
-		main("presence")
-		details([
-			"presence", "presenceControl", "notPresentBtn", "presentBtn"
-		])
-	}
-}
-
-def installed() {
-	sendEvent(name: "presence", value: "present")
-}
-
-def parse(String description) {
-}
-
-def arrived() {
-	log.trace "Executing 'arrived'"
-	sendEvent(name: "presence", value: "present")
-}
-
-def departed() {
-	log.trace "Executing 'arrived'"
-	sendEvent(name: "presence", value: "not present")
-}

devicetypes/smartthings/tile-ux/tile-basic-slider.src/tile-basic-slider.groovy

@@ -1,75 +0,0 @@
-/**
- *  Copyright 2016 SmartThings, Inc.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (
-		name: "sliderDeviceTile",
-		namespace: "smartthings/tile-ux",
-		author: "SmartThings") {
-
-		capability "Switch Level"
-		command "setRangedLevel", ["number"]
-	}
-
-	tiles(scale: 2) {
-		controlTile("tinySlider", "device.level", "slider", height: 2, width: 2, inactiveLabel: false) {
-			state "level", action:"switch level.setLevel"
-		}
-
-		controlTile("mediumSlider", "device.level", "slider", height: 2, width: 4, inactiveLabel: false) {
-			state "level", action:"switch level.setLevel"
-		}
-
-		controlTile("largeSlider", "device.level", "slider", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
-			state "level", action:"switch level.setLevel"
-		}
-
-		controlTile("rangeSlider", "device.rangedLevel", "slider", height: 2, width: 4, range: "(20..80)") {
-			state "level", action:"setRangedLevel"
-		}
-
-		valueTile("rangeValue", "device.rangedLevel", height: 2, width: 2) {
-			state "default", label:'${currentValue}'
-		}
-
-		controlTile("rangeSliderConstrained", "device.rangedLevel", "slider", height: 2, width: 4, range: "(40..60)") {
-			state "level", action:"setRangedLevel"
-		}
-
-		main("rangeValue")
-		details([
-			"tinySlider", "mediumSlider",
-			"largeSlider",
-			"rangeSlider", "rangeValue",
-			"rangeSliderConstrained"
-		])
-	}
-}
-
-def installed() {
-	sendEvent(name: "level", value: 63)
-	sendEvent(name: "rangedLevel", value: 47)
-}
-
-def parse(String description) {
-}
-
-def setLevel(value) {
-	log.debug "setting level to $value"
-	sendEvent(name:"level", value:value)
-}
-
-def setRangedLevel(value) {
-	log.debug "setting ranged level to $value"
-	sendEvent(name:"rangedLevel", value:value)
-}

devicetypes/smartthings/tile-ux/tile-basic-standard.src/tile-basic-standard.groovy

@@ -1,121 +0,0 @@
-/**
- *  Copyright 2016 SmartThings, Inc.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (
-		name: "standardDeviceTile",
-		namespace: "smartthings/tile-ux",
-		author: "SmartThings") {
-
-		capability "Switch"
-	}
-
-	tiles(scale: 2) {
-		// standard tile with actions
-		standardTile("actionRings", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "off", label: '${currentValue}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
-			state "on", label: '${currentValue}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
-		}
-
-		// standard flat tile with actions
-		standardTile("actionFlat", "device.switch", width: 2, height: 2, canChangeIcon: true, decoration: "flat") {
-			state "off", label: '${currentValue}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
-			state "on", label: '${currentValue}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
-		}
-
-		// standard flat tile without actions
-		standardTile("noActionFlat", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "off", label: '${currentValue}',icon: "st.switches.switch.off", backgroundColor: "#ffffff"
-			state "on", label: '${currentValue}', icon: "st.switches.switch.on", backgroundColor: "#79b821"
-		}
-
-		// standard flat tile with only a label
-		standardTile("flatLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
-			state "default", label: 'On Action', action: "switch.on", backgroundColor: "#ffffff"
-		}
-
-		// standard flat tile with icon and label
-		standardTile("flatIconLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
-			state "default", label: 'Off Action', action: "switch.off", icon:"st.switches.switch.off", backgroundColor: "#ffffff"
-		}
-
-		// standard flat tile with only icon (Refreh text is IN the icon file)
-		standardTile("flatIcon", "device.switch", width: 2, height: 2, decoration: "flat") {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		// standard with defaultState = true
-		standardTile("flatDefaultState", "null", width: 2, height: 2, decoration: "flat") {
-			state "off", label: 'Fail!', icon: "st.switches.switch.off"
-			state "on", label: 'Pass!', icon: "st.switches.switch.on", defaultState: true
-		}
-
-		// standard with implicit defaultState based on order (0 index is selected)
-		standardTile("flatImplicitDefaultState1", "null", width: 2, height: 2, decoration: "flat") {
-			state "on", label: 'Pass!', icon: "st.switches.switch.on"
-			state "off", label: 'Fail!', icon: "st.switches.switch.off"
-		}
-
-		// standard with implicit defaultState based on state.name == default
-		standardTile("flatImplicitDefaultState2", "null", width: 2, height: 2, decoration: "flat") {
-			state "off", label: 'Fail!', icon: "st.switches.switch.off"
-			state "default", label: 'Pass!', icon: "st.switches.switch.on"
-		}
-
-		// utility tiles to fill the spaces
-		standardTile("empty2x2", "null", width: 2, height: 2, decoration: "flat") {
-			state "default", label:''
-		}
-		standardTile("empty4x2", "null", width: 4, height: 2, decoration: "flat") {
-			state "default", label:''
-		}
-
-		// multi-line text (explicit newlines)
-		standardTile("multiLine", "device.multiLine", width: 2, height: 2) {
-			state "default", label: '${currentValue}'
-		}
-
-		standardTile("multiLineWithIcon", "device.multiLine", width: 2, height: 2) {
-			state "default", label: '${currentValue}', icon: "st.switches.switch.off"
-		}
-
-		main("actionRings")
-		details([
-			"actionRings", "actionFlat", "noActionFlat",
-
-			"flatLabel", "flatIconLabel", "flatIcon",
-
-			"flatDefaultState", "flatImplicitDefaultState1", "flatImplicitDefaultState2",
-
-			"multiLine", "multiLineWithIcon"
-		])
-	}
-}
-
-def installed() {
-	sendEvent(name: "switch", value: "off")
-	sendEvent(name: "multiLine", value: "Line 1\nLine 2\nLine 3")
-}
-
-def parse(String description) {
-}
-
-def on() {
-	log.debug "on()"
-	sendEvent(name: "switch", value: "on")
-}
-
-def off() {
-	log.debug "off()"
-	sendEvent(name: "switch", value: "off")
-}

devicetypes/smartthings/tile-ux/tile-basic-value.src/tile-basic-value.groovy

@@ -1,106 +0,0 @@
-/**
- *  Copyright 2016 SmartThings, Inc.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (
-		name: "valueDeviceTile",
-		namespace: "smartthings/tile-ux",
-		author: "SmartThings") {
-
-		capability "Sensor"
-	}
-
-	tiles(scale: 2) {
-		valueTile("text", "device.text", width: 2, height: 2) {
-			state "default", label:'${currentValue}'
-		}
-
-		valueTile("longText", "device.longText", width: 2, height: 2) {
-			state "default", label:'${currentValue}'
-		}
-
-		valueTile("integer", "device.integer", width: 2, height: 2) {
-			state "default", label:'${currentValue}'
-		}
-
-		valueTile("integerFloat", "device.integerFloat", width: 2, height: 2) {
-			state "default", label:'${currentValue}'
-		}
-
-		valueTile("pi", "device.pi", width: 2, height: 2) {
-			state "default", label:'${currentValue}'
-		}
-
-		valueTile("floatAsText", "device.floatAsText", width: 2, height: 2) {
-			state "default", label:'${currentValue}'
-		}
-
-		valueTile("bgColor", "device.integer", width: 2, height: 2) {
-			state "default", label:'${currentValue}', backgroundColor: "#e86d13"
-		}
-
-		valueTile("bgColorRange", "device.integer", width: 2, height: 2) {
-			state "default", label:'${currentValue}', backgroundColors: [
-				[value: 10, color: "#ff0000"],
-				[value: 90, color: "#0000ff"]
-			]
-		}
-
-		valueTile("bgColorRangeSingleItem", "device.integer", width: 2, height: 2) {
-			state "default", label:'${currentValue}', backgroundColors: [
-				[value: 10, color: "#333333"]
-			]
-		}
-
-		valueTile("bgColorRangeConflict", "device.integer", width: 2, height: 2) {
-			state "default", label:'${currentValue}', backgroundColors: [
-				[value: 10, color: "#990000"],
-				[value: 10, color: "#000099"]
-			]
-		}
-
-		valueTile("noValue", "device.nada", width: 4, height: 2) {
-			state "default", label:'${currentValue}'
-		}
-
-		valueTile("multiLine", "device.multiLine", width: 3, height: 2) {
-			state "default", label: '${currentValue}'
-		}
-
-		valueTile("multiLineWithIcon", "device.multiLine", width: 3, height: 2) {
-			state "default", label: '${currentValue}', icon: "st.switches.switch.off"
-		}
-
-		main("text")
-		details([
-			"text", "longText", "integer", 
-            "integerFloat", "pi", "floatAsText",
-            "bgColor", "bgColorRange", "bgColorRangeSingleItem",
-            "bgColorRangeConflict", "noValue",
-            "multiLine", "multiLineWithIcon"
-		])
-	}
-}
-
-def installed() {
-	sendEvent(name: "text", value: "Test")
-	sendEvent(name: "longText", value: "The Longer The Text, The Better The Test")
-	sendEvent(name: "integer", value: 47)
-	sendEvent(name: "integerFloat", value: 47.0)
-	sendEvent(name: "pi", value: 3.14159)
-	sendEvent(name: "floatAsText", value: "3.14159")
-	sendEvent(name: "multiLine", value: "Line 1\nLine 2\nLine 3")
-}
-
-def parse(String description) {
-}

devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy

@@ -1,151 +0,0 @@
-/**
- *  Copyright 2016 SmartThings, Inc.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "genericDeviceTile", namespace: "smartthings/tile-ux", author: "SmartThings") {
-		capability "Actuator"
-		capability "Switch"
-		capability "Switch Level"
-
-		command "levelUp"
-		command "levelDown"
-		command "randomizeLevel"
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"basicTile", type:"generic", width:6, height:4) {
-			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-		}
-		multiAttributeTile(name:"sliderTile", type:"generic", width:6, height:4) {
-			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute("device.level", key: "SECONDARY_CONTROL") {
-				attributeState "default", icon: 'st.Weather.weather1', action:"randomizeLevel"
-			}
-			tileAttribute("device.level", key: "SLIDER_CONTROL") {
-				attributeState "default", action:"switch level.setLevel"
-			}
-		}
-		multiAttributeTile(name:"valueTile", type:"generic", width:6, height:4) {
-			tileAttribute("device.level", key: "PRIMARY_CONTROL") {
-				attributeState "default", label:'${currentValue}', backgroundColors:[
-					[value: 0, color: "#ff0000"],
-					[value: 20, color: "#ffff00"],
-					[value: 40, color: "#00ff00"],
-					[value: 60, color: "#00ffff"],
-					[value: 80, color: "#0000ff"],
-					[value: 100, color: "#ff00ff"]
-				]
-			}
-			tileAttribute("device.switch", key: "SECONDARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'…', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'…', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute("device.level", key: "VALUE_CONTROL") {
-				attributeState "VALUE_UP", action: "levelUp"
-				attributeState "VALUE_DOWN", action: "levelDown"
-			}
-		}
-		multiAttributeTile(name:"lengthyTile", type:"generic", width:6, height:4) {
-			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
-				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821"
-			}
-			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
-				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821"
-			}
-		}
-		multiAttributeTile(name:"multilineTile", type:"generic", width:6, height:4) {
-			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
-				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821"
-			}
-			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
-				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821"
-			}
-		}
-		multiAttributeTile(name:"lengthyTileWithIcon", type:"generic", width:6, height:4) {
-			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
-				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on"
-			}
-			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
-				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on"
-			}
-		}
-		multiAttributeTile(name:"multilineTileWithIcon", type:"generic", width:6, height:4) {
-			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
-				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on"
-			}
-			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
-				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on"
-			}
-		}
-
-		main(["basicTile"])
-		details(["basicTile", "sliderTile", "valueTile", "lengthyTile", "multilineTile", "lengthyTileWithIcon", "multilineTileWithIcon"])
-	}
-}
-
-def installed() {
-	sendEvent(name: "lengthyText", value: "The value of this tile is long and should wrap to two lines")
-	sendEvent(name: "multilineText", value: "Line 1 YES\nLine 2 YES\nLine 3 NO")
-}
-
-def parse() {
-	// This is a simulated device. No incoming data to parse.
-}
-
-def on() {
-	log.debug "turningOn"
-	sendEvent(name: "switch", value: "on")
-}
-
-def off() {
-	log.debug "turningOff"
-	sendEvent(name: "switch", value: "off")
-}
-
-def setLevel(percent) {
-	log.debug "setLevel: ${percent}, this"
-	sendEvent(name: "level", value: percent)
-}
-
-def randomizeLevel() {
-	def level = Math.round(Math.random() * 100)
-	setLevel(level)
-}
-
-def levelUp() {
-	def level = device.latestValue("level") as Integer ?: 0
-	if (level < 100) {
-		level = level + 1
-	}
-	setLevel(level)
-}
-
-def levelDown() {
-	def level = device.latestValue("level") as Integer ?: 0
-	if (level > 0) {
-		level = level - 1
-	}
-	setLevel(level)
-}

devicetypes/smartthings/tile-ux/tile-multiattribute-lighting.src/tile-multiattribute-lighting.groovy

@@ -1,211 +0,0 @@
-/**
- *  Copyright 2016 SmartThings, Inc.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (
-		name: "lightingDeviceTile",
-		namespace: "smartthings/tile-ux",
-		author: "SmartThings") {
-
-		capability "Switch Level"
-		capability "Actuator"
-		capability "Color Control"
-		capability "Power Meter"
-		capability "Switch"
-		capability "Refresh"
-		capability "Sensor"
-
-		command "setAdjustedColor"
-		command "reset"
-		command "refresh"
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.power", key: "SECONDARY_CONTROL") {
-				attributeState "power", label:'Power level: ${currentValue}W', icon: "st.Appliances.appliances17"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-			tileAttribute ("device.color", key: "COLOR_CONTROL") {
-				attributeState "color", action:"setAdjustedColor"
-			}
-		}
-
-		multiAttributeTile(name:"switchNoPower", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-			tileAttribute ("device.color", key: "COLOR_CONTROL") {
-				attributeState "color", action:"setAdjustedColor"
-			}
-		}
-
-		multiAttributeTile(name:"switchNoSlider", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.power", key: "SECONDARY_CONTROL") {
-				attributeState "power", label:'The power level is currently: ${currentValue}W', icon: "st.Appliances.appliances17"
-			}
-			tileAttribute ("device.color", key: "COLOR_CONTROL") {
-				attributeState "color", action:"setAdjustedColor"
-			}
-		}
-
-		multiAttributeTile(name:"switchNoSliderOrColor", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.power", key: "SECONDARY_CONTROL") {
-				attributeState "power", label:'The light is currently consuming this amount of power: ${currentValue}W', icon: "st.Appliances.appliances17"
-			}
-		}
-
-		valueTile("color", "device.color", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "color", label: '${currentValue}'
-		}
-
-		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main(["switch"])
-		details(["switch", "switchNoPower", "switchNoSlider", "switchNoSliderOrColor", "color", "refresh", "reset"])
-	}
-}
-
-// parse events into attributes
-def parse(description) {
-	log.debug "parse() - $description"
-	def results = []
-	def map = description
-	if (description instanceof String)  {
-		log.debug "Hue Bulb stringToMap - ${map}"
-		map = stringToMap(description)
-	}
-	if (map?.name && map?.value) {
-		results << createEvent(name: "${map?.name}", value: "${map?.value}")
-	}
-	results
-}
-
-// handle commands
-def on() {
-	//log.trace parent.on(this)
-	sendEvent(name: "switch", value: "on")
-}
-
-def off() {
-	//log.trace parent.off(this)
-	sendEvent(name: "switch", value: "off")
-}
-
-def nextLevel() {
-	def level = device.latestValue("level") as Integer ?: 0
-	if (level <= 100) {
-		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
-	}
-	else {
-		level = 25
-	}
-	setLevel(level)
-}
-
-def setLevel(percent) {
-	log.debug "setLevel: ${percent}, this"
-	sendEvent(name: "level", value: percent)
-	def power = Math.round(percent / 1.175) * 0.1
-	sendEvent(name: "power", value: power)
-}
-
-def setSaturation(percent) {
-	log.debug "setSaturation: ${percent}, $this"
-	sendEvent(name: "saturation", value: percent)
-}
-
-def setHue(percent) {
-	log.debug "setHue: ${percent}, $this"
-	sendEvent(name: "hue", value: percent)
-}
-
-def setColor(value) {
-	log.debug "setColor: ${value}, $this"
-	if (value.hue) { sendEvent(name: "hue", value: value.hue)}
-	if (value.saturation) { sendEvent(name: "saturation", value: value.saturation)}
-	if (value.hex) { sendEvent(name: "color", value: value.hex)}
-	if (value.level) { sendEvent(name: "level", value: value.level)}
-	if (value.switch) { sendEvent(name: "switch", value: value.switch)}
-}
-
-def reset() {
-	log.debug "Executing 'reset'"
-	setAdjustedColor([level:100, hex:"#90C638", saturation:56, hue:23])
-	//parent.poll()
-}
-
-def setAdjustedColor(value) {
-	if (value) {
-		log.trace "setAdjustedColor: ${value}"
-		def adjusted = value + [:]
-		adjusted.hue = adjustOutgoingHue(value.hue)
-		// Needed because color picker always sends 100
-		adjusted.level = null
-		setColor(adjusted)
-	}
-}
-
-def refresh() {
-	log.debug "Executing 'refresh'"
-	//parent.manualRefresh()
-}
-
-def adjustOutgoingHue(percent) {
-	def adjusted = percent
-	if (percent > 31) {
-		if (percent < 63.0) {
-			adjusted = percent + (7 * (percent -30 ) / 32)
-		}
-		else if (percent < 73.0) {
-			adjusted = 69 + (5 * (percent - 62) / 10)
-		}
-		else {
-			adjusted = percent + (2 * (100 - percent) / 28)
-		}
-	}
-	log.info "percent: $percent, adjusted: $adjusted"
-	adjusted
-}
-

devicetypes/smartthings/tile-ux/tile-multiattribute-mediaplayer.src/tile-multiattribute-mediaplayer.groovy

@@ -1,122 +0,0 @@
-/**
- *  Copyright 2016 SmartThings, Inc.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (
-		name: "mediaPlayerDeviceTile",
-		namespace: "smartthings/tile-ux",
-		author: "SmartThings") {
-
-		capability "Actuator"
-		capability "Switch"
-		capability "Refresh"
-		capability "Sensor"
-		capability "Music Player"
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name: "mediaMulti", type:"mediaPlayer", width:6, height:4) {
-			tileAttribute("device.status", key: "PRIMARY_CONTROL") {
-				attributeState("paused", label:"Paused",)
-				attributeState("playing", label:"Playing")
-				attributeState("stopped", label:"Stopped")
-			}
-			tileAttribute("device.status", key: "MEDIA_STATUS") {
-				attributeState("paused", label:"Paused", action:"music Player.play", nextState: "playing")
-				attributeState("playing", label:"Playing", action:"music Player.pause", nextState: "paused")
-				attributeState("stopped", label:"Stopped", action:"music Player.play", nextState: "playing")
-			}
-			tileAttribute("device.status", key: "PREVIOUS_TRACK") {
-				attributeState("default", action:"music Player.previousTrack")
-			}
-			tileAttribute("device.status", key: "NEXT_TRACK") {
-				attributeState("default", action:"music Player.nextTrack")
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState("level", action:"music Player.setLevel")
-			}
-			tileAttribute ("device.mute", key: "MEDIA_MUTED") {
-				attributeState("unmuted", action:"music Player.mute", nextState: "muted")
-				attributeState("muted", action:"music Player.unmute", nextState: "unmuted")
-			}
-			tileAttribute("device.trackDescription", key: "MARQUEE") {
-				attributeState("default", label:"${currentValue}")
-			}
-		}
-
-		main "mediaMulti"
-		details(["mediaMulti"])
-	}
-}
-
-def installed() {
-	state.tracks = [
-		"Gangnam Style (강남스타일)\nPSY\nPsy 6 (Six Rules), Part 1",
-		"Careless Whisper\nWham!\nMake It Big",
-		"Never Gonna Give You Up\nRick Astley\nWhenever You Need Somebody",
-		"Shake It Off\nTaylor Swift\n1989",
-		"Ironic\nAlanis Morissette\nJagged Little Pill",
-		"Hotline Bling\nDrake\nHotline Bling - Single"
-	]
-	state.currentTrack = 0
-
-	sendEvent(name: "level", value: 72)
-	sendEvent(name: "mute", value: "unmuted")
-	sendEvent(name: "status", value: "stopped")
-}
-
-def parse(description) {
-	// No parsing will happen with this simulated device.
-}
-
-def play() {
-	sendEvent(name: "status", value: "playing")
-	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
-}
-
-def pause() {
-	sendEvent(name: "status", value: "paused")
-	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
-}
-
-def stop() {
-	sendEvent(name: "status", value: "stopped")
-}
-
-def previousTrack() {
-	state.currentTrack = state.currentTrack - 1
-	if (state.currentTrack < 0)
-		state.currentTrack = state.tracks.size()-1
-
-	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
-}
-
-def nextTrack() {
-	state.currentTrack = state.currentTrack + 1
-	if (state.currentTrack == state.tracks.size())
-		state.currentTrack = 0
-
-	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
-}
-
-def mute() {
-	sendEvent(name: "mute", value: "muted")
-}
-
-def unmute() {
-	sendEvent(name: "mute", value: "unmuted")
-}
-
-def setLevel(level) {
-	sendEvent(name: "level", value: level)
-}

devicetypes/smartthings/tile-ux/tile-multiattribute-thermostat.src/tile-multiattribute-thermostat.groovy

@@ -1,341 +0,0 @@
-/**
- *  Copyright 2016 SmartThings, Inc.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (
-		name: "thermostatDeviceTile",
-		namespace: "smartthings/tile-ux",
-		author: "SmartThings") {
-
-		capability "Thermostat"
-		capability "Relative Humidity Measurement"
-
-		command "tempUp"
-		command "tempDown"
-		command "heatUp"
-		command "heatDown"
-		command "coolUp"
-		command "coolDown"
-		command "setTemperature", ["number"]
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"thermostatFull", type:"thermostat", width:6, height:4) {
-			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
-				attributeState("VALUE_UP", action: "tempUp")
-				attributeState("VALUE_DOWN", action: "tempDown")
-			}
-			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
-				attributeState("default", label:'${currentValue}%', unit:"%")
-			}
-			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
-				attributeState("idle", backgroundColor:"#44b621")
-				attributeState("heating", backgroundColor:"#ffa81e")
-				attributeState("cooling", backgroundColor:"#269bd2")
-			}
-			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
-				attributeState("off", label:'${name}')
-				attributeState("heat", label:'${name}')
-				attributeState("cool", label:'${name}')
-				attributeState("auto", label:'${name}')
-			}
-			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-		}
-		multiAttributeTile(name:"thermostatNoHumidity", type:"thermostat", width:6, height:4) {
-			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
-				attributeState("VALUE_UP", action: "tempUp")
-				attributeState("VALUE_DOWN", action: "tempDown")
-			}
-			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
-				attributeState("idle", backgroundColor:"#44b621")
-				attributeState("heating", backgroundColor:"#ffa81e")
-				attributeState("cooling", backgroundColor:"#269bd2")
-			}
-			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
-				attributeState("off", label:'${name}')
-				attributeState("heat", label:'${name}')
-				attributeState("cool", label:'${name}')
-				attributeState("auto", label:'${name}')
-			}
-			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-		}
-		multiAttributeTile(name:"thermostatBasic", type:"thermostat", width:6, height:4) {
-			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState("default", label:'${currentValue}', unit:"dF",
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				])
-			}
-			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
-				attributeState("VALUE_UP", action: "tempUp")
-				attributeState("VALUE_DOWN", action: "tempDown")
-			}
-		}
-
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}', unit:"dF",
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
-			)
-		}
-		standardTile("tempDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'down', action:"tempDown"
-		}
-		standardTile("tempUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'up', action:"tempUp"
-		}
-
-		valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "heat", label:'${currentValue} heat', unit: "F", backgroundColor:"#ffffff"
-		}
-		standardTile("heatDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'down', action:"heatDown"
-		}
-		standardTile("heatUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'up', action:"heatUp"
-		}
-
-		valueTile("coolingSetpoint", "device.coolingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "cool", label:'${currentValue} cool', unit:"F", backgroundColor:"#ffffff"
-		}
-		standardTile("coolDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'down', action:"coolDown"
-		}
-		standardTile("coolUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'up', action:"coolUp"
-		}
-
-		standardTile("mode", "device.thermostatMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "off", label:'${name}', action:"thermostat.heat", backgroundColor:"#ffffff"
-			state "heat", label:'${name}', action:"thermostat.cool", backgroundColor:"#ffa81e"
-			state "cool", label:'${name}', action:"thermostat.auto", backgroundColor:"#269bd2"
-			state "auto", label:'${name}', action:"thermostat.off", backgroundColor:"#79b821"
-		}
-		standardTile("fanMode", "device.thermostatFanMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "fanAuto", label:'${name}', action:"thermostat.fanOn", backgroundColor:"#ffffff"
-			state "fanOn", label:'${name}', action:"thermostat.fanCirculate", backgroundColor:"#ffffff"
-			state "fanCirculate", label:'${name}', action:"thermostat.fanAuto", backgroundColor:"#ffffff"
-		}
-		standardTile("operatingState", "device.thermostatOperatingState", width: 2, height: 2) {
-			state "idle", label:'${name}', backgroundColor:"#ffffff"
-			state "heating", label:'${name}', backgroundColor:"#ffa81e"
-			state "cooling", label:'${name}', backgroundColor:"#269bd2"
-		}
-
-
-		main("thermostatFull")
-		details([
-			"thermostatFull", "thermostatNoHumidity", "thermostatBasic",
-			"temperature","tempDown","tempUp",
-			"mode", "fanMode", "operatingState",
-			"heatingSetpoint", "heatDown", "heatUp",
-			"coolingSetpoint", "coolDown", "coolUp"
-		])
-	}
-}
-
-def installed() {
-	sendEvent(name: "temperature", value: 72, unit: "F")
-	sendEvent(name: "heatingSetpoint", value: 70, unit: "F")
-	sendEvent(name: "thermostatSetpoint", value: 70, unit: "F")
-	sendEvent(name: "coolingSetpoint", value: 76, unit: "F")
-	sendEvent(name: "thermostatMode", value: "off")
-	sendEvent(name: "thermostatFanMode", value: "fanAuto")
-	sendEvent(name: "thermostatOperatingState", value: "idle")
-	sendEvent(name: "humidity", value: 53, unit: "%")
-}
-
-def parse(String description) {
-}
-
-def evaluate(temp, heatingSetpoint, coolingSetpoint) {
-	log.debug "evaluate($temp, $heatingSetpoint, $coolingSetpoint"
-	def threshold = 1.0
-	def current = device.currentValue("thermostatOperatingState")
-	def mode = device.currentValue("thermostatMode")
-
-	def heating = false
-	def cooling = false
-	def idle = false
-	if (mode in ["heat","emergency heat","auto"]) {
-		if (heatingSetpoint - temp >= threshold) {
-			heating = true
-			sendEvent(name: "thermostatOperatingState", value: "heating")
-		}
-		else if (temp - heatingSetpoint >= threshold) {
-			idle = true
-		}
-		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
-	}
-	if (mode in ["cool","auto"]) {
-		if (temp - coolingSetpoint >= threshold) {
-			cooling = true
-			sendEvent(name: "thermostatOperatingState", value: "cooling")
-		}
-		else if (coolingSetpoint - temp >= threshold && !heating) {
-			idle = true
-		}
-		sendEvent(name: "thermostatSetpoint", value: coolingSetpoint)
-	}
-	else {
-		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
-	}
-
-	if (mode == "off") {
-		idle = true
-	}
-
-	if (idle && !heating && !cooling) {
-		sendEvent(name: "thermostatOperatingState", value: "idle")
-	}
-}
-
-def setHeatingSetpoint(Double degreesF) {
-	log.debug "setHeatingSetpoint($degreesF)"
-	sendEvent(name: "heatingSetpoint", value: degreesF)
-	evaluate(device.currentValue("temperature"), degreesF, device.currentValue("coolingSetpoint"))
-}
-
-def setCoolingSetpoint(Double degreesF) {
-	log.debug "setCoolingSetpoint($degreesF)"
-	sendEvent(name: "coolingSetpoint", value: degreesF)
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), degreesF)
-}
-
-def setThermostatMode(String value) {
-	sendEvent(name: "thermostatMode", value: value)
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def setThermostatFanMode(String value) {
-	sendEvent(name: "thermostatFanMode", value: value)
-}
-
-def off() {
-	sendEvent(name: "thermostatMode", value: "off")
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def heat() {
-	sendEvent(name: "thermostatMode", value: "heat")
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def auto() {
-	sendEvent(name: "thermostatMode", value: "auto")
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def emergencyHeat() {
-	sendEvent(name: "thermostatMode", value: "emergency heat")
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def cool() {
-	sendEvent(name: "thermostatMode", value: "cool")
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def fanOn() {
-	sendEvent(name: "thermostatFanMode", value: "fanOn")
-}
-
-def fanAuto() {
-	sendEvent(name: "thermostatFanMode", value: "fanAuto")
-}
-
-def fanCirculate() {
-	sendEvent(name: "thermostatFanMode", value: "fanCirculate")
-}
-
-def poll() {
-	null
-}
-
-def tempUp() {
-	def ts = device.currentState("temperature")
-	def value = ts ? ts.integerValue + 1 : 72
-	sendEvent(name:"temperature", value: value)
-	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def tempDown() {
-	def ts = device.currentState("temperature")
-	def value = ts ? ts.integerValue - 1 : 72
-	sendEvent(name:"temperature", value: value)
-	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def setTemperature(value) {
-	def ts = device.currentState("temperature")
-	sendEvent(name:"temperature", value: value)
-	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
-}
-
-def heatUp() {
-	def ts = device.currentState("heatingSetpoint")
-	def value = ts ? ts.integerValue + 1 : 68
-	sendEvent(name:"heatingSetpoint", value: value)
-	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
-}
-
-def heatDown() {
-	def ts = device.currentState("heatingSetpoint")
-	def value = ts ? ts.integerValue - 1 : 68
-	sendEvent(name:"heatingSetpoint", value: value)
-	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
-}
-
-
-def coolUp() {
-	def ts = device.currentState("coolingSetpoint")
-	def value = ts ? ts.integerValue + 1 : 76
-	sendEvent(name:"coolingSetpoint", value: value)
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
-}
-
-def coolDown() {
-	def ts = device.currentState("coolingSetpoint")
-	def value = ts ? ts.integerValue - 1 : 76
-	sendEvent(name:"coolingSetpoint", value: value)
-	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
-}

devicetypes/smartthings/tile-ux/tile-multiattribute-videoplayer.src/tile-multiattribute-videoplayer.groovy

@@ -1,169 +0,0 @@
-/**
- *  Copyright 2016 SmartThings, Inc.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *	  http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (
-		name: "videoPlayerDeviceTile",
-		namespace: "smartthings/tile-ux",
-		author: "SmartThings") {
-
-		capability "Configuration"
-		capability "Video Camera"
-		capability "Video Capture"
-		capability "Refresh"
-		capability "Switch"
-
-		// custom commands
-		command "start"
-		command "stop"
-		command "setProfileHD"
-		command "setProfileSDH"
-		command "setProfileSDL"
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name: "videoPlayer", type: "videoPlayer", width: 6, height: 4) {
-			tileAttribute("device.switch", key: "CAMERA_STATUS") {
-				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", action: "switch.off", backgroundColor: "#79b821", defaultState: true)
-				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", action: "switch.on", backgroundColor: "#ffffff")
-				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
-				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", action: "refresh.refresh", backgroundColor: "#F22000")
-			}
-
-			tileAttribute("device.errorMessage", key: "CAMERA_ERROR_MESSAGE") {
-				attributeState("errorMessage", label: "", value: "", defaultState: true)
-			}
-
-			tileAttribute("device.camera", key: "PRIMARY_CONTROL") {
-				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", backgroundColor: "#79b821", defaultState: true)
-				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", backgroundColor: "#ffffff")
-				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
-				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", backgroundColor: "#F22000")
-			}
-
-			tileAttribute("device.startLive", key: "START_LIVE") {
-				attributeState("live", action: "start", defaultState: true)
-			}
-
-			tileAttribute("device.stream", key: "STREAM_URL") {
-				attributeState("activeURL", defaultState: true)
-			}
-
-			tileAttribute("device.profile", key: "STREAM_QUALITY") {
-				attributeState("1", label: "720p", action: "setProfileHD", defaultState: true)
-				attributeState("2", label: "h360p", action: "setProfileSDH", defaultState: true)
-				attributeState("3", label: "l360p", action: "setProfileSDL", defaultState: true)
-			}
-
-			tileAttribute("device.betaLogo", key: "BETA_LOGO") {
-				attributeState("betaLogo", label: "", value: "", defaultState: true)
-			}
-		}
-		
-		multiAttributeTile(name: "videoPlayerMin", type: "videoPlayer", width: 6, height: 4) {
-			tileAttribute("device.switch", key: "CAMERA_STATUS") {
-				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", action: "switch.off", backgroundColor: "#79b821", defaultState: true)
-				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", action: "switch.on", backgroundColor: "#ffffff")
-				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
-				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", action: "refresh.refresh", backgroundColor: "#F22000")
-			}
-
-			tileAttribute("device.errorMessage", key: "CAMERA_ERROR_MESSAGE") {
-				attributeState("errorMessage", label: "", value: "", defaultState: true)
-			}
-
-			tileAttribute("device.camera", key: "PRIMARY_CONTROL") {
-				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", backgroundColor: "#79b821", defaultState: true)
-				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", backgroundColor: "#ffffff")
-				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
-				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", backgroundColor: "#F22000")
-			}
-
-			tileAttribute("device.startLive", key: "START_LIVE") {
-				attributeState("live", action: "start", defaultState: true)
-			}
-
-			tileAttribute("device.stream", key: "STREAM_URL") {
-				attributeState("activeURL", defaultState: true)
-			}
-		}
-
-		main("videoPlayer")
-		details([
-			"videoPlayer", "videoPlayerMin"
-		])
-	}
-}
-
-def installed() {
-}
-
-def parse(String description) {
-}
-
-def refresh() {
-	log.trace "refresh()"
-	// no-op
-}
-
-def on() {
-	log.trace "on()"
-	// no-op
-}
-
-def off() {
-	log.trace "off()"
-	// no-op
-}
-
-def setProfile(profile) {
-	log.trace "setProfile(): ${profile}"
-	sendEvent(name: "profile", value: profile, displayed: false)
-}
-
-def setProfileHD() {
-	setProfile(1)
-}
-
-def setProfileSDH() {
-	setProfile(2)
-}
-
-def setProfileSDL() {
-	setProfile(3)
-}
-
-def start() {
-	log.trace "start()"
-	def dataLiveVideo = [
-		OutHomeURL  : "https://devimages.apple.com.edgekey.net/streaming/examples/bipbop_4x3/bipbop_4x3_variant.m3u8",
-		InHomeURL   : "https://devimages.apple.com.edgekey.net/streaming/examples/bipbop_4x3/bipbop_4x3_variant.m3u8",
-		ThumbnailURL: "http://cdn.device-icons.smartthings.com/camera/dlink-indoor@2x.png",
-		cookie      : [key: "key", value: "value"]
-	]
-
-	def event = [
-		name           : "stream",
-		value          : groovy.json.JsonOutput.toJson(dataLiveVideo).toString(),
-		data		   : groovy.json.JsonOutput.toJson(dataLiveVideo),
-		descriptionText: "Starting the livestream",
-		eventType      : "VIDEO",
-		displayed      : false,
-		isStateChange  : true
-	]
-	sendEvent(event)
-}
-
-def stop() {
-	log.trace "stop()"
-}

devicetypes/smartthings/wattvision.src/wattvision.groovy

@@ -33,7 +33,7 @@ metadata {
 			state "power", label: '${currentValue} W'
 		}
 
-		htmlTile(name: "powerContent", attribute: "powerContent", type: "HTML", whitelist: ["www.wattvision.com"] , url: '${currentValue}', width: 3, height: 2)
+		htmlTile(name: "powerContent", attribute: "powerContent", type: "HTML", whitelist: "www.wattvision.com" , url: '${currentValue}', width: 3, height: 2)
 
 		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
 			state "default", label: '', action: "refresh.refresh", icon: "st.secondary.refresh"

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -1,194 +0,0 @@
-/**
- *  Iris Smart Fob
- *
- *  Copyright 2015 Mitch Pond
- *	Presence code adapted from SmartThings Arrival Sensor HA device type
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
-		capability "Battery"
-		capability "Button"
-        capability "Configuration"
-		capability "Presence Sensor"
-		capability "Sensor"
-        
-		//fingerprint endpointId: "01", profileId: "0104", inClusters: "0000,0001,0003,0007,0020,0B05", outClusters: "0003,0006,0019", model:"3450-L", manufacturer: "CentraLite"
-	}
-    
-    preferences{
-	    input ("holdTime", "number", title: "Minimum time in seconds for a press to count as \"held\"",
-    		defaultValue: 3, displayDuringSetup: false)
-        input "checkInterval", "enum", title: "Presence timeout (minutes)",
-            defaultValue:"2", options: ["2", "3", "5"], displayDuringSetup: false
-        input "logging", "bool", title: "Enable debug logging",
-            defaultValue: false, displayDuringSetup: false
-    }
-
-	tiles(scale: 2) {
-    	standardTile("presence", "device.presence", width: 4, height: 4, canChangeBackground: true) {
-            state "present", label: "Present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
-            state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
-        }
-    	standardTile("button", "device.button", decoration: "flat", width: 2, height: 2) {
-        	state "default", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
-        }
-		valueTile("battery", "device.battery", decoration: "flat", width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-
-		main (["presence"])
-		details(["presence","button","battery"])
-	}
-}
-
-def parse(String description) {
-    def descMap = zigbee.parseDescriptionAsMap(description)
-    logIt descMap
-    state.lastCheckin = now()
-    logIt "lastCheckin = ${state.lastCheckin}"
-    handlePresenceEvent(true)
-    
-	def results = []
-    if (description?.startsWith('catchall:'))
-		results = parseCatchAllMessage(descMap)
-	else if (description?.startsWith('read attr -'))
-		results = parseReportAttributeMessage(descMap)
-    else logIt(descMap, "trace")
-        
-	return results;
-}
-
-def updated() {
-	startTimer()
-    configure()
-}
-
-def configure(){
-	logIt "Configuring Smart Fob..."
-	[
-	"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
-    "zdo bind 0x${device.deviceNetworkId} 2 1 6 {${device.zigbeeId}} {}", "delay 200",
-    "zdo bind 0x${device.deviceNetworkId} 3 1 6 {${device.zigbeeId}} {}", "delay 200",
-    "zdo bind 0x${device.deviceNetworkId} 4 1 6 {${device.zigbeeId}} {}", "delay 200",
-    "zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 200"
-    ] +
-    zigbee.configureReporting(0x0001,0x0020,0x20,20,20,0x01)
-}
-
-def parseCatchAllMessage(descMap) {
-    if (descMap?.clusterId == "0006" && descMap?.command == "01") 		//button pressed
-    	handleButtonPress(descMap.sourceEndpoint as int)
-    else if (descMap?.clusterId == "0006" && descMap?.command == "00") 	//button released
-    	handleButtonRelease(descMap.sourceEndpoint as int)
-    else logIt("Parse: Unhandled message: ${descMap}","trace")
-}
-
-def parseReportAttributeMessage(descMap) {
-	if (descMap?.cluster == "0001" && descMap?.attrId == "0020") createBatteryEvent(getBatteryLevel(descMap.value))
-    else logIt descMap
-}
-
-private createBatteryEvent(percent) {
-	logIt "Battery level at " + percent
-	return createEvent([name: "battery", value: percent])
-}
-
-//this method determines if a press should count as a push or a hold and returns the relevant event type
-private handleButtonRelease(button) {
-	logIt "lastPress state variable: ${state.lastPress}"
-    def sequenceError = {logIt("Uh oh...missed a message? Dropping this event.", "error"); state.lastPress = null; return []}	
-    
-    if (!state.lastPress) return sequenceError()
-	else if (state.lastPress.button != button) return sequenceError()
-    
-    def currentTime = now()
-    def startOfPress = state.lastPress?.time
-    def timeDif = currentTime - startOfPress
-    def holdTimeMillisec = (settings.holdTime?:3).toInteger() * 1000
-    
-    state.lastPress = null	//we're done with this. clear it to make error conditions easier to catch
-    
-    if (timeDif < 0) 
-    //likely a message sequence issue or dropped packet. Drop this press and wait for another.
-    	return sequenceError()
-    else if (timeDif < holdTimeMillisec)
-    	return createButtonEvent(button,"pushed")
-    else 
-    	return createButtonEvent(button,"held")
-}
-
-private handleButtonPress(button) {
-	state.lastPress = [button: button, time: now()]
-}
-
-private createButtonEvent(button,action) {
-	logIt "Button ${button} ${action}"
-	return createEvent([
-    	name: "button",
-        value: action, 
-        data:[buttonNumber: button], 
-        descriptionText: "${device.displayName} button ${button} was ${action}",
-        isStateChange: true, 
-        displayed: true])
-}
-
-private getBatteryLevel(rawValue) {
-	def intValue = Integer.parseInt(rawValue,16)
-	def min = 2.1
-    def max = 3.0
-    def vBatt = intValue / 10
-    return ((vBatt - min) / (max - min) * 100) as int
-}
-
-private handlePresenceEvent(present) {
-    def wasPresent = device.currentState("presence")?.value == "present"
-    if (!wasPresent && present) {
-        logIt "Sensor is present"
-        startTimer()
-    } else if (!present) {
-        logIt "Sensor is not present"
-        stopTimer()
-    }
-    def linkText = getLinkText(device)
-    def eventMap = [
-        name: "presence",
-        value: present ? "present" : "not present",
-        linkText: linkText,
-        descriptionText: "${linkText} has ${present ? 'arrived' : 'left'}",
-    ]
-    logIt "Creating presence event: ${eventMap}"
-    sendEvent(eventMap)
-}
-
-private startTimer() {
-    logIt "Scheduling periodic timer"
-    schedule("0 * * * * ?", checkPresenceCallback)
-}
-
-private stopTimer() {
-    logIt "Stopping periodic timer"
-    unschedule()
-}
-
-def checkPresenceCallback() {
-    def timeSinceLastCheckin = (now() - state.lastCheckin) / 1000
-    def theCheckInterval = (checkInterval ? checkInterval as int : 2) * 60
-    logIt "Sensor checked in ${timeSinceLastCheckin} seconds ago"
-    if (timeSinceLastCheckin >= theCheckInterval) {
-        handlePresenceEvent(false)
-    }
-}
-
-// ****** Utility functions ******
-
-private logIt(str, logLevel = 'debug') {if (settings.logging) log."$logLevel"(str) }

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -56,17 +56,21 @@ metadata {
 def parse(String description) {
     log.debug "description is $description"
 
-    def event = zigbee.getEvent(description)
-    if (event) {
-        log.info event
-        if (event.name == "power") {
+    def resultMap = zigbee.getKnownDescription(description)
+    if (resultMap) {
+        log.info resultMap
+        if (resultMap.type == "update") {
+            log.info "$device updates: ${resultMap.value}"
+        }
+        else if (resultMap.type == "power") {
+            def powerValue
             if (device.getDataValue("manufacturer") != "OSRAM") {       //OSRAM devices do not reliably update power
-                event.value = (event.value as Integer) / 10             //TODO: The divisor value needs to be set as part of configuration
-                sendEvent(event)
+                powerValue = (resultMap.value as Integer)/10            //TODO: The divisor value needs to be set as part of configuration
+                sendEvent(name: "power", value: powerValue)
             }
         }
         else {
-            sendEvent(event)
+            sendEvent(name: resultMap.type, value: resultMap.value)
         }
     }
     else {

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -51,9 +51,15 @@ metadata {
 def parse(String description) {
     log.debug "description is $description"
 
-    def event = zigbee.getEvent(description)
-    if (event) {
-        sendEvent(event)
+    def resultMap = zigbee.getKnownDescription(description)
+    if (resultMap) {
+        log.info resultMap
+        if (resultMap.type == "update") {
+            log.info "$device updates: ${resultMap.value}"
+        }
+        else {
+            sendEvent(name: resultMap.type, value: resultMap.value)
+        }
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -83,19 +83,32 @@ def uninstalled() {
 }
 
 def configure() {
+    /*
     def cmds =
-        zigbee.configureReporting(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE,
-                                  TYPE_ENUM8, 0, 3600, null) +
-        zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING,
-                                  TYPE_U8, 600, 21600, 0x01)
+        zigbee.configSetup("${CLUSTER_DOORLOCK}", "${DOORLOCK_ATTR_LOCKSTATE}",
+                           "${TYPE_ENUM8}", 0, 3600, "{01}") +
+        zigbee.configSetup("${CLUSTER_POWER}", "${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING}",
+                           "${TYPE_U8}", 600, 21600, "{01}")
+    */
+    def zigbeeId = device.zigbeeId
+    def cmds =
+        [
+            "zdo bind 0x${device.deviceNetworkId} 0x${device.endpointId} 1 ${CLUSTER_DOORLOCK} {$zigbeeId} {}", "delay 200",
+            "zcl global send-me-a-report ${CLUSTER_DOORLOCK} ${DOORLOCK_ATTR_LOCKSTATE} ${TYPE_ENUM8} 0 3600 {01}", "delay 200",
+            "send 0x${device.deviceNetworkId} 1 0x${device.endpointId}", "delay 200",
+
+            "zdo bind 0x${device.deviceNetworkId} 0x${device.endpointId} 1 ${CLUSTER_POWER} {$zigbeeId} {}", "delay 200",
+            "zcl global send-me-a-report ${CLUSTER_POWER} ${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING} ${TYPE_U8} 600 21600 {01}", "delay 200",
+            "send 0x${device.deviceNetworkId} 1 0x${device.endpointId}", "delay 200",
+        ]
     log.info "configure() --- cmds: $cmds"
     return cmds + refresh() // send refresh cmds as part of config
 }
 
 def refresh() {
     def cmds =
-        zigbee.readAttribute(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE) +
-        zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING)
+        zigbee.refreshData("${CLUSTER_DOORLOCK}", "${DOORLOCK_ATTR_LOCKSTATE}") +
+        zigbee.refreshData("${CLUSTER_POWER}", "${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING}")
     log.info "refresh() --- cmds: $cmds"
     return cmds
 }
@@ -108,27 +121,34 @@ def parse(String description) {
         map = parseReportAttributeMessage(description)
     }
 
+    log.debug "parse() --- Parse returned $map"
     def result = map ? createEvent(map) : null
-    log.debug "parse() --- returned: $result"
     return result
 }
 
 // Lock capability commands
 def lock() {
-    def cmds = zigbee.command(CLUSTER_DOORLOCK, DOORLOCK_CMD_LOCK_DOOR)
-    log.info "lock() -- cmds: $cmds"
-    return cmds
+    //def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_LOCK_DOOR}", "{}")
+    //log.info "lock() -- cmds: $cmds"
+    //return cmds
+    "st cmd 0x${device.deviceNetworkId} 0x${device.endpointId} ${CLUSTER_DOORLOCK} ${DOORLOCK_CMD_LOCK_DOOR} {}"
 }
 
 def unlock() {
-    def cmds = zigbee.command(CLUSTER_DOORLOCK, DOORLOCK_CMD_UNLOCK_DOOR)
-    log.info "unlock() -- cmds: $cmds"
-    return cmds
+    //def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_UNLOCK_DOOR}", "{}")
+    //log.info "unlock() -- cmds: $cmds"
+    //return cmds
+    "st cmd 0x${device.deviceNetworkId} 0x${device.endpointId} ${CLUSTER_DOORLOCK} ${DOORLOCK_CMD_UNLOCK_DOOR} {}"
 }
 
 // Private methods
 private Map parseReportAttributeMessage(String description) {
+    log.trace "parseReportAttributeMessage() --- description: $description"
+
     Map descMap = zigbee.parseDescriptionAsMap(description)
+
+    log.debug "parseReportAttributeMessage() --- descMap: $descMap"
+
     Map resultMap = [:]
     if (descMap.clusterInt == CLUSTER_POWER && descMap.attrInt == POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) {
         resultMap.name = "battery"
@@ -136,24 +156,18 @@ private Map parseReportAttributeMessage(String description) {
         if (device.getDataValue("manufacturer") == "Yale") {            //Handling issue with Yale locks incorrect battery reporting
             resultMap.value = Integer.parseInt(descMap.value, 16)
         }
+        log.info "parseReportAttributeMessage() --- battery: ${resultMap.value}"
     }
     else if (descMap.clusterInt == CLUSTER_DOORLOCK && descMap.attrInt == DOORLOCK_ATTR_LOCKSTATE) {
         def value = Integer.parseInt(descMap.value, 16)
-        def linkText = getLinkText(device)
         resultMap.name = "lock"
-        if (value == 0) {
-            resultMap.value = "unknown"
-            resultMap.descriptionText = "${linkText} is not fully locked"
-        } else if (value == 1) {
-            resultMap.value = "locked"
-            resultMap.descriptionText = "${linkText} is locked"
-        } else if (value == 2) {
-            resultMap.value = "unlocked"
-            resultMap.descriptionText = "${linkText} is unlocked"
-        } else {
-            resultMap.value = "unknown"
-            resultMap.descriptionText = "${linkText} is in unknown lock state"
-        }
+        resultMap.putAll([0:["value":"unknown",
+                             "descriptionText":"Not fully locked"],
+                          1:["value":"locked"],
+                          2:["value":"unlocked"]].get(value,
+                                                      ["value":"unknown",
+                                                       "descriptionText":"Unknown lock state"]))
+        log.info "parseReportAttributeMessage() --- lock: ${resultMap.value}"
     }
     else {
         log.debug "parseReportAttributeMessage() --- ignoring attribute"

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -51,15 +51,22 @@ metadata {
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
-    def event = zigbee.getEvent(description)
-    if (event) {
-        if (event.name == "power") {
+
+    def resultMap = zigbee.getKnownDescription(description)
+    if (resultMap) {
+        log.info resultMap
+        if (resultMap.type == "update") {
+            log.info "$device updates: ${resultMap.value}"
+        }
+        else if (resultMap.type == "power") {
             def powerValue
-            powerValue = (event.value as Integer)/10            //TODO: The divisor value needs to be set as part of configuration
-            sendEvent(name: "power", value: powerValue)
+            if (device.getDataValue("manufacturer") != "OSRAM") {       //OSRAM devices do not reliably update power
+                powerValue = (resultMap.value as Integer)/10            //TODO: The divisor value needs to be set as part of configuration
+                sendEvent(name: "power", value: powerValue)
+            }
         }
         else {
-            sendEvent(event)
+            sendEvent(name: resultMap.type, value: resultMap.value)
         }
     }
     else {

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -53,9 +53,16 @@ metadata {
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
-    def event = zigbee.getEvent(description)
-    if (event) {
-        sendEvent(event)
+
+    def resultMap = zigbee.getKnownDescription(description)
+    if (resultMap) {
+        log.info resultMap
+        if (resultMap.type == "update") {
+            log.info "$device updates: ${resultMap.value}"
+        }
+        else {
+            sendEvent(name: resultMap.type, value: resultMap.value)
+        }
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -73,9 +73,16 @@ metadata {
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
-    def event = zigbee.getEvent(description)
-    if (event) {
-        sendEvent(event)
+
+    def finalResult = zigbee.getKnownDescription(description)
+    if (finalResult) {
+        log.info finalResult
+        if (finalResult.type == "update") {
+            log.info "$device updates: ${finalResult.value}"
+        }
+        else {
+            sendEvent(name: finalResult.type, value: finalResult.value)
+        }
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -25,10 +25,7 @@ metadata {
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x80,0x84,0x85,0x86,0x72"
 		fingerprint deviceId: "0x07", inClusters: "0x30"
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x86,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -243,25 +240,17 @@ def batteryGetCommand() {
 def retypeBasedOnMSR() {
 	switch (state.MSR) {
 		case "0086-0002-002D":
-			log.debug "Changing device type to Z-Wave Water Sensor"
+			log.debug("Changing device type to Z-Wave Water Sensor")
 			setDeviceType("Z-Wave Water Sensor")
 			break
 		case "011F-0001-0001":  // Schlage motion
 		case "014A-0001-0001":  // Ecolink motion
-		case "014A-0004-0001":  // Ecolink motion +
 		case "0060-0001-0002":  // Everspring SP814
 		case "0060-0001-0003":  // Everspring HSP02
 		case "011A-0601-0901":  // Enerwave ZWN-BPC
-			log.debug "Changing device type to Z-Wave Motion Sensor"
+			log.debug("Changing device type to Z-Wave Motion Sensor")
 			setDeviceType("Z-Wave Motion Sensor")
 			break
-		case "013C-0002-000D":  // Philio multi +
-			log.debug "Changing device type to 3-in-1 Multisensor Plus (SG)"
-			setDeviceType("3-in-1 Multisensor Plus (SG)")
-			break
-		case "0109-2001-0106":  // Vision door/window
-			log.debug "Changing device type to Door / Window Sensor Plus (SG)"
-			setDeviceType("Door / Window Sensor Plus (SG)")
-			break
+		
 	}
 }

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -57,7 +57,7 @@ def parse(String description) {
 	return result
 }
 
-def sensorValueEvent(value) {
+def sensorValueEvent(Short value) {
 	if (value) {
 		createEvent(name: "motion", value: "active", descriptionText: "$device.displayName detected motion")
 	} else {
@@ -94,24 +94,24 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 {
 	def result = []
 	if (cmd.notificationType == 0x07) {
-		if (cmd.v1AlarmType == 0x07) {  // special case for nonstandard messages from Monoprice ensors
-			result << sensorValueEvent(cmd.v1AlarmLevel)
-		} else if (cmd.event == 0x01 || cmd.event == 0x02 || cmd.event == 0x07 || cmd.event == 0x08) {
+		if (cmd.event == 0x01 || cmd.event == 0x02) {
 			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x00) {
-			result << sensorValueEvent(0)
 		} else if (cmd.event == 0x03) {
-			result << createEvent(name: "tamper", value: "detected", descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			result << response(zwave.batteryV1.batteryGet())
+			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId))
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
 			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
+		} else if (cmd.event == 0x07) {
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+			result << sensorValueEvent(1)
 		}
 	} else if (cmd.notificationType) {
 		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
-		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, isStateChange: true, displayed: false)
+		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
 	} else {
 		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
-		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, isStateChange: true, displayed: false)
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
 	}
 	result
 }

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -61,44 +61,37 @@ def parse(String description) {
 			zwaveEvent(cmd, results)
 		}
 	}
-	log.debug "'$description' parsed to ${results.inspect()}"
+	// log.debug "\"$description\" parsed to ${results.inspect()}"
 	return results
 }
 
 
 def createSmokeOrCOEvents(name, results) {
 	def text = null
-	switch (name) {
-		case "smoke":
-			text = "$device.displayName smoke was detected!"
-			// these are displayed:false because the composite event is the one we want to see in the app
-			results << createEvent(name: "smoke",          value: "detected", descriptionText: text, displayed: false)
-			break
-		case "carbonMonoxide":
-			text = "$device.displayName carbon monoxide was detected!"
-			results << createEvent(name: "carbonMonoxide", value: "detected", descriptionText: text, displayed: false)
-			break
-		case "tested":
-			text = "$device.displayName was tested"
-			results << createEvent(name: "smoke",          value: "tested", descriptionText: text, displayed: false)
-			results << createEvent(name: "carbonMonoxide", value: "tested", descriptionText: text, displayed: false)
-			break
-		case "smokeClear":
-			text = "$device.displayName smoke is clear"
-			results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
-			name = "clear"
-			break
-		case "carbonMonoxideClear":
-			text = "$device.displayName carbon monoxide is clear"
-			results << createEvent(name: "carbonMonoxide", value: "clear", descriptionText: text, displayed: false)
-			name = "clear"
-			break
-		case "testClear":
-			text = "$device.displayName test cleared"
-			results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
-			results << createEvent(name: "carbonMonoxide", value: "clear", displayed: false)
-			name = "clear"
-			break
+	if (name == "smoke") {
+		text = "$device.displayName smoke was detected!"
+		// these are displayed:false because the composite event is the one we want to see in the app
+		results << createEvent(name: "smoke",          value: "detected", descriptionText: text, displayed: false)
+	} else if (name == "carbonMonoxide") {
+		text = "$device.displayName carbon monoxide was detected!"
+		results << createEvent(name: "carbonMonoxide", value: "detected", descriptionText: text, displayed: false)
+	} else if (name == "tested") {
+		text = "$device.displayName was tested"
+		results << createEvent(name: "smoke",          value: "tested", descriptionText: text, displayed: false)
+		results << createEvent(name: "carbonMonoxide", value: "tested", descriptionText: text, displayed: false)
+	} else if (name == "smokeClear") {
+		text = "$device.displayName smoke is clear"
+		results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
+		name = "clear"
+	} else if (name == "carbonMonoxideClear") {
+		text = "$device.displayName carbon monoxide is clear"
+		results << createEvent(name: "carbonMonoxide", value: "clear", descriptionText: text, displayed: false)
+		name = "clear"
+	} else if (name == "testClear") {
+		text = "$device.displayName smoke is clear"
+		results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
+		results << createEvent(name: "carbonMonoxide", value: "clear", displayed: false)
+		name = "clear"
 	}
 	// This composite event is used for updating the tile
 	results << createEvent(name: "alarmState", value: name, descriptionText: text)
@@ -124,10 +117,8 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd, results) {
 			createSmokeOrCOEvents(cmd.alarmLevel ? "tested" : "testClear", results)
 			break
 		case 13:  // sent every hour -- not sure what this means, just a wake up notification?
-			if (cmd.alarmLevel == 255) {
-				results << createEvent(descriptionText: "$device.displayName checked in", isStateChange: false)
-			} else {
-				results << createEvent(descriptionText: "$device.displayName code 13 is $cmd.alarmLevel", isStateChange:true, displayed:false)
+			if (cmd.alarmLevel != 255) {
+				results << createEvent(descriptionText: "$device.displayName code 13 is $cmd.alarmLevel", displayed: true)
 			}
 			
 			// Clear smoke in case they pulled batteries and we missed the clear msg
@@ -136,8 +127,9 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd, results) {
 			}
 			
 			// Check battery if we don't have a recent battery event
-			if (!state.lastbatt || (now() - state.lastbatt) >= 48*60*60*1000) {
-				results << response(zwave.batteryV1.batteryGet())
+			def prevBattery = device.currentState("battery")
+			if (!prevBattery || (new Date().time - prevBattery.date.time)/60000 >= 60 * 53) {
+				results << new physicalgraph.device.HubAction(zwave.batteryV1.batteryGet().format())
 			}
 			break
 		default:
@@ -166,17 +158,12 @@ def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd,
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd, results) {
+	results << new physicalgraph.device.HubAction(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
 	results << createEvent(descriptionText: "$device.displayName woke up", isStateChange: false)
-	if (!state.lastbatt || (now() - state.lastbatt) >= 56*60*60*1000) {
-		results << response(zwave.batteryV1.batteryGet(), "delay 2000", zwave.wakeUpV1.wakeUpNoMoreInformation())
-	} else {
-		results << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
-	}
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd, results) {
-	def map = [ name: "battery", unit: "%", isStateChange: true ]
-	state.lastbatt = now()
+	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
 		map.value = 1
 		map.descriptionText = "$device.displayName battery is low!"

smartapps/com-obycode/beaconthings-manager.src/beaconthings-manager.groovy

@@ -1,147 +0,0 @@
-/**
- *  BeaconThing Manager
- *
- *  Copyright 2015 obycode
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "BeaconThings Manager",
-    namespace: "com.obycode",
-    author: "obycode",
-    description: "SmartApp to interact with the BeaconThings iOS app. Use this app to integrate iBeacons into your smart home.",
-    category: "Convenience",
-    iconUrl: "http://beaconthingsapp.com/images/Icon-60.png",
-    iconX2Url: "http://beaconthingsapp.com/images/Icon-60@2x.png",
-    iconX3Url: "http://beaconthingsapp.com/images/Icon-60@3x.png",
-    oauth: true)
-
-
-preferences {
-	section("Allow BeaconThings to talk to your home") {
-
-	}
-}
-
-def installed() {
-  log.debug "Installed with settings: ${settings}"
-
-  initialize()
-}
-
-def initialize() {
-}
-
-def uninstalled() {
-  removeChildDevices(getChildDevices())
-}
-
-mappings {
-  path("/beacons") {
-    action: [
-    DELETE: "clearBeacons",
-    POST:   "addBeacon"
-    ]
-  }
-
-  path("/beacons/:id") {
-    action: [
-    PUT: "updateBeacon",
-    DELETE: "deleteBeacon"
-    ]
-  }
-}
-
-void clearBeacons() {
-  removeChildDevices(getChildDevices())
-}
-
-void addBeacon() {
-  def beacon = request.JSON?.beacon
-  if (beacon) {
-    def beaconId = "BeaconThings"
-    if (beacon.major) {
-      beaconId = "$beaconId-${beacon.major}"
-      if (beacon.minor) {
-        beaconId = "$beaconId-${beacon.minor}"
-      }
-    }
-    log.debug "adding beacon $beaconId"
-    def d = addChildDevice("com.obycode", "BeaconThing", beaconId,  null, [label:beacon.name, name:"BeaconThing", completedSetup: true])
-    log.debug "addChildDevice returned $d"
-
-    if (beacon.present) {
-      d.arrive(beacon.present)
-    }
-    else if (beacon.presence) {
-      d.setPresence(beacon.presence)
-    }
-  }
-}
-
-void updateBeacon() {
-  log.debug "updating beacon ${params.id}"
-  def beaconDevice = getChildDevice(params.id)
-  // def children = getChildDevices()
-  // def beaconDevice = children.find{ d -> d.deviceNetworkId == "${params.id}" }
-  if (!beaconDevice) {
-    log.debug "Beacon not found directly"
-    def children = getChildDevices()
-    beaconDevice = children.find{ d -> d.deviceNetworkId == "${params.id}" }
-    if (!beaconDevice) {
-      log.debug "Beacon not found in list either"
-      return
-    }
-  }
-
-  // This could be just updating the presence
-  def presence = request.JSON?.presence
-  if (presence) {
-    log.debug "Setting ${beaconDevice.label} to $presence"
-    beaconDevice.setPresence(presence)
-  }
-
-  // It could be someone arriving
-  def arrived = request.JSON?.arrived
-  if (arrived) {
-    log.debug "$arrived arrived at ${beaconDevice.label}"
-    beaconDevice.arrived(arrived)
-  }
-
-  // It could be someone left
-  def left = request.JSON?.left
-  if (left) {
-    log.debug "$left left ${beaconDevice.label}"
-    beaconDevice.left(left)
-  }
-
-  // or it could be updating the name
-  def beacon = request.JSON?.beacon
-  if (beacon) {
-    beaconDevice.label = beacon.name
-  }
-}
-
-void deleteBeacon() {
-  log.debug "deleting beacon ${params.id}"
-  deleteChildDevice(params.id)
-  // def children = getChildDevices()
-  // def beaconDevice = children.find{ d -> d.deviceNetworkId == "${params.id}" }
-  // if (beaconDevice) {
-  //   deleteChildDevice(beaconDevice.deviceNetworkId)
-  // }
-}
-
-private removeChildDevices(delete) {
-  delete.each {
-    deleteChildDevice(it.deviceNetworkId)
-  }
-}

smartapps/com-vinli-smartthings/vinli-home-connect.src/vinli-home-connect.groovy

@@ -67,11 +67,11 @@ mappings {
 def listAllDevices() {
    	def resp = []
    	switches.each {
-      resp << [name: it.name, label: it.label, value: it.currentValue("switch"), type: "switch", id: it.id, hub: it.hub?.name]
+      resp << [name: it.name, label: it.label, value: it.currentValue("switch"), type: "switch", id: it.id, hub: it.hub.name]
     }
     
     locks.each {
-      resp << [name: it.name, label: it.label, value: it.currentValue("lock"), type: "lock", id: it.id, hub: it.hub?.name]
+      resp << [name: it.name, label: it.label, value: it.currentValue("lock"), type: "lock", id: it.id, hub: it.hub.name]
     }
     return resp
 }

smartapps/johnrucker/door-jammed-notification.src/door-jammed-notification.groovy

@@ -1,66 +0,0 @@
-/**
- *  Door Jammed Notification
- *
- *  Copyright 2015 John Rucker
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
- 
-definition(
-    name: "Door Jammed Notification",
-    namespace: "JohnRucker",
-    author: "John.Rucker@Solar-current.com",
-    description: "Sends a SmartThings notification and text messages when your CoopBoss detects a door jam.",
-    category: "My Apps",
-    iconUrl: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo.png",
-    iconX2Url: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo2x.png",
-    iconX3Url: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo3x.png")
-
-preferences {
-    section("When the door state changes") {
-        paragraph "Send a SmartThings notification when the coop's door jammed and did not close."
-		input "doorSensor", "capability.doorControl", title: "Select CoopBoss", required: true, multiple: false            
-        input("recipients", "contact", title: "Recipients", description: "Send notifications to") {
-        	input "phone", "phone", title: "Phone number?", required: true}
-	}
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-	subscribe(doorSensor, "doorState", coopDoorStateHandler)
-}
-
-def coopDoorStateHandler(evt) {
-	if (evt.value == "jammed"){
-        def msg = "WARNING ${doorSensor.displayName} door is jammed and did not close!"
-        log.debug "WARNING ${doorSensor.displayName} door is jammed and did not close, texting $phone"
-
-        if (location.contactBookEnabled) {
-            sendNotificationToContacts(msg, recipients)
-        }
-        else {
-            sendPush(msg)
-            if (phone) {
-                sendSms(phone, msg)
-            }
-        }
-	}        
-}

smartapps/johnrucker/door-state-to-color-light-hue-bulb.src/door-state-to-color-light-hue-bulb.groovy

@@ -1,141 +0,0 @@
-/**
- *  CoopBoss Door Status to color
- *
- *  Copyright 2015 John Rucker
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
- 
-definition(
-    name: "Door State to Color Light (Hue Bulb)",
-    namespace: "JohnRucker",
-    author: "John Rucker",
-    description: "Change the color of your Hue bulbs based on your coop's door status.",
-    category: "My Apps",
-    iconUrl: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo.png",
-    iconX2Url: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo2x.png",
-    iconX3Url: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo3x.png")
-
-
-preferences {
-	section("When the door opens/closese...") {
-    	paragraph "Sets a Hue bulb or bulbs to a color based on your coop's door status:\r  unknown = white\r  open = blue\r  opening = purple\r  closed = green\r  closing = pink\r  jammed = red\r  forced close = orange."
-		input "doorSensor", "capability.doorControl", title: "Select CoopBoss", required: true, multiple: false
-		input "bulbs", "capability.colorControl", title: "pick a bulb", required: true, multiple: true
-	}
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-	subscribe(doorSensor, "doorState", coopDoorStateHandler)
-}
-
-def coopDoorStateHandler(evt) {
-    log.debug "${evt.descriptionText}, $evt.value"
-	def color = "White"
-    def hueColor = 100
-    def saturation = 100
-    Map hClr = [:]
-    hClr.hex = "#FFFFFF"
-
-	switch(evt.value) {
-    	case "open":
-        	color = "Blue"
-            break;
-        case "opening":
-        	color = "Purple"
-            break;
-        case "closed":
-        	color = "Green"
-            break;
-    	case "closing":
-        	color = "Pink"
-            break;
-        case "jammed":
-        	color = "Red"
-            break;
-        case "forced close":
-        	color = "Orange"
-            break;
-        case "unknown":
-        	color = "White"
-            break;        
-    }   
-       
-	switch(color) {
-		case "White":
-			hueColor = 52
-			saturation = 19
-			break;
-		case "Daylight":
-			hueColor = 53
-			saturation = 91
-			break;
-		case "Soft White":
-			hueColor = 23
-			saturation = 56
-			break;
-		case "Warm White":
-			hueColor = 20
-			saturation = 80 //83
-			break;
-		case "Blue":
-			hueColor = 70
-            hClr.hex = "#0000FF"
-			break;
-		case "Green":
-			hueColor = 39
-            hClr.hex = "#00FF00"
-			break;
-		case "Yellow":
-			hueColor = 25
-            hClr.hex = "#FFFF00"            
-			break;
-		case "Orange":
-			hueColor = 10
-            hClr.hex = "#FF6000"
-			break;
-		case "Purple":
-			hueColor = 75
-            hClr.hex = "#BF7FBF"
-			break;
-		case "Pink":
-			hueColor = 83
-            hClr.hex = "#FF5F5F"
-			break;
-		case "Red":
-			hueColor = 100
-            hClr.hex = "#FF0000"
-			break;
-	}    
-    
-    //bulbs*.on()
-    bulbs*.setHue(hueColor)
-	bulbs*.setSaturation(saturation)   
-    bulbs*.setColor(hClr)
-    
-    //bulbs.each{
-    	//it.on()  // Turn the bulb on when open (this method does not come directly from the colorControl capability)
-    	//it.setLevel(100)  // Make sure the light brightness is 100%       
-    	//it.setHue(hueColor)
-		//it.setSaturation(saturation) 
-        //}        
-}

smartapps/roomieremote-raconnect/simple-sync-connect.src/simple-sync-connect.groovy

@@ -1,383 +0,0 @@
-/**
- *  Simple Sync Connect
- *
- *  Copyright 2015 Roomie Remote, Inc.
- *
- *	Date: 2015-09-22
- */
-
-definition(
-    name: "Simple Sync Connect",
-    namespace: "roomieremote-raconnect",
-    author: "Roomie Remote, Inc.",
-    description: "Integrate SmartThings with your Simple Control activities via Simple Sync.",
-    category: "My Apps",
-    iconUrl: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-60.png",
-    iconX2Url: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-120.png",
-    iconX3Url: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-120.png")
-
-preferences()
-{
-	page(name: "mainPage", title: "Simple Sync Setup", content: "mainPage", refreshTimeout: 5)
-    page(name:"agentDiscovery", title:"Simple Sync Discovery", content:"agentDiscovery", refreshTimeout:5)
-    page(name:"manualAgentEntry")
-    page(name:"verifyManualEntry")
-}
-
-def mainPage()
-{
-	if (canInstallLabs())
-    {
-       	return agentDiscovery()
-    }
-    else
-    {
-        def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date.
-
-To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
-
-        return dynamicPage(name:"mainPage", title:"Upgrade needed!", nextPage:"", install:false, uninstall: true) {
-            section("Upgrade")
-            {
-                paragraph "$upgradeNeeded"
-            }
-        }
-    }
-}
-
-def agentDiscovery(params=[:])
-{
-	int refreshCount = !state.refreshCount ? 0 : state.refreshCount as int
-    state.refreshCount = refreshCount + 1
-    def refreshInterval = refreshCount == 0 ? 2 : 5
-	
-    if (!state.subscribe)
-    {
-        subscribe(location, null, locationHandler, [filterEvents:false])
-        state.subscribe = true
-    }
-	
-    //ssdp request every fifth refresh
-    if ((refreshCount % 5) == 0)
-    {
-        discoverAgents()
-    }
-	
-    def agentsDiscovered = agentsDiscovered()
-    
-    return dynamicPage(name:"agentDiscovery", title:"Pair with Simple Sync", nextPage:"", refreshInterval: refreshInterval, install:true, uninstall: true) {
-        section("Pair with Simple Sync")
-        {
-            input "selectedAgent", "enum", required:true, title:"Select Simple Sync\n(${agentsDiscovered.size() ?: 0} found)", multiple:false, options:agentsDiscovered
-        	href(name:"manualAgentEntry",
-            	 title:"Manually Configure Simple Sync",
-                 required:false,
-                 page:"manualAgentEntry")
-        }
-    }
-}
-
-def manualAgentEntry()
-{
-	dynamicPage(name:"manualAgentEntry", title:"Manually Configure Simple Sync", nextPage:"verifyManualEntry", install:false, uninstall:true) {
-    	section("Manually Configure Simple Sync")
-        {
-        	paragraph "In the event that Simple Sync cannot be automatically discovered by your SmartThings hub, you may enter Simple Sync's IP address here."
-            input(name: "manualIPAddress", type: "text", title: "IP Address", required: true)
-        }
-    }
-}
-
-def verifyManualEntry()
-{
-    def hexIP = convertIPToHexString(manualIPAddress)
-    def hexPort = convertToHexString(47147)
-    def uuid = "593C03D2-1DA9-4CDB-A335-6C6DC98E56C3"
-    def hubId = ""
-    
-    for (hub in location.hubs)
-    {
-    	if (hub.localIP != null)
-        {
-        	hubId = hub.id
-            break
-        }
-    }
-    
-    def manualAgent = [deviceType: "04",
-    					mac: "unknown",
-    					ip: hexIP,
-                        port: hexPort,
-                        ssdpPath: "/upnp/Roomie.xml",
-                        ssdpUSN: "uuid:$uuid::urn:roomieremote-com:device:roomie:1",
-                        hub: hubId,
-                        verified: true,
-                        name: "Simple Sync $manualIPAddress"]
-	
-    state.agents[uuid] = manualAgent
-    
-    addOrUpdateAgent(state.agents[uuid])
-    
-    dynamicPage(name: "verifyManualEntry", title: "Manual Configuration Complete", nextPage: "", install:true, uninstall:true) {
-    	section("")
-        {
-        	paragraph("Tap Done to complete the installation process.")
-        }
-    }
-}
-
-def discoverAgents()
-{
-    def urn = getURN()
-    
-    sendHubCommand(new physicalgraph.device.HubAction("lan discovery $urn", physicalgraph.device.Protocol.LAN))
-}
-
-def agentsDiscovered()
-{
-    def gAgents = getAgents()
-    def agents = gAgents.findAll { it?.value?.verified == true }
-    def map = [:]
-    agents.each
-    {
-        map["${it.value.uuid}"] = it.value.name
-    }
-    map
-}
-
-def getAgents()
-{
-    if (!state.agents)
-    {
-    	state.agents = [:]
-    }
-    
-    state.agents
-}
-
-def installed()
-{
-	initialize()
-}
-
-def updated()
-{
-	initialize()
-}
-
-def initialize()
-{
-	if (state.subscribe)
-	{
-    	unsubscribe()
-		state.subscribe = false
-	}
-    
-    if (selectedAgent)
-    {
-    	addOrUpdateAgent(state.agents[selectedAgent])
-    }
-}
-
-def addOrUpdateAgent(agent)
-{
-	def children = getChildDevices()
-	def dni = agent.ip + ":" + agent.port
-    def found = false
-	
-	children.each
-	{
-		if ((it.getDeviceDataByName("mac") == agent.mac))
-		{
-        	found = true
-            
-            if (it.getDeviceNetworkId() != dni)
-            {
-				it.setDeviceNetworkId(dni)
-			}
-		}
-        else if (it.getDeviceNetworkId() == dni)
-        {
-        	found = true
-        }
-	}
-    
-	if (!found)
-	{
-        addChildDevice("roomieremote-agent", "Simple Sync", dni, agent.hub, [label: "Simple Sync"])
-	}
-}
-
-def locationHandler(evt)
-{
-    def description = evt?.description
-    def urn = getURN()
-    def hub = evt?.hubId
-    def parsedEvent = parseEventMessage(description)
-    
-    parsedEvent?.putAt("hub", hub)
-    
-    //SSDP DISCOVERY EVENTS
-	if (parsedEvent?.ssdpTerm?.contains(urn))
-	{
-        def agent = parsedEvent
-        def ip = convertHexToIP(agent.ip)
-        def agents = getAgents()
-        
-        agent.verified = true
-        agent.name = "Simple Sync $ip"
-        
-        if (!agents[agent.uuid])
-        {
-        	state.agents[agent.uuid] = agent
-        }
-    }
-}
-
-private def parseEventMessage(String description)
-{
-	def event = [:]
-	def parts = description.split(',')
-    
-	parts.each
-    { part ->
-		part = part.trim()
-		if (part.startsWith('devicetype:'))
-        {
-			def valueString = part.split(":")[1].trim()
-			event.devicetype = valueString
-		}
-		else if (part.startsWith('mac:'))
-        {
-			def valueString = part.split(":")[1].trim()
-			if (valueString)
-            {
-				event.mac = valueString
-			}
-		}
-		else if (part.startsWith('networkAddress:'))
-        {
-			def valueString = part.split(":")[1].trim()
-			if (valueString)
-            {
-				event.ip = valueString
-			}
-		}
-		else if (part.startsWith('deviceAddress:'))
-        {
-			def valueString = part.split(":")[1].trim()
-			if (valueString)
-            {
-				event.port = valueString
-			}
-		}
-		else if (part.startsWith('ssdpPath:'))
-        {
-			def valueString = part.split(":")[1].trim()
-			if (valueString)
-            {
-				event.ssdpPath = valueString
-			}
-		}
-		else if (part.startsWith('ssdpUSN:'))
-        {
-			part -= "ssdpUSN:"
-			def valueString = part.trim()
-			if (valueString)
-            {
-				event.ssdpUSN = valueString
-                
-                def uuid = getUUIDFromUSN(valueString)
-                
-                if (uuid)
-                {
-                	event.uuid = uuid
-                }
-			}
-		}
-		else if (part.startsWith('ssdpTerm:'))
-        {
-			part -= "ssdpTerm:"
-			def valueString = part.trim()
-			if (valueString)
-            {
-				event.ssdpTerm = valueString
-			}
-		}
-		else if (part.startsWith('headers'))
-        {
-			part -= "headers:"
-			def valueString = part.trim()
-			if (valueString)
-            {
-				event.headers = valueString
-			}
-		}
-		else if (part.startsWith('body'))
-        {
-			part -= "body:"
-			def valueString = part.trim()
-			if (valueString)
-            {
-				event.body = valueString
-			}
-		}
-	}
-
-	event
-}
-
-def getURN()
-{
-    return "urn:roomieremote-com:device:roomie:1"
-}
-
-def getUUIDFromUSN(usn)
-{
-	def parts = usn.split(":")
-	
-	for (int i = 0; i < parts.size(); ++i)
-	{
-		if (parts[i] == "uuid")
-		{
-			return parts[i + 1]
-		}
-	}
-}
-
-def String convertHexToIP(hex)
-{
-	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
-}
-
-def Integer convertHexToInt(hex)
-{
-	Integer.parseInt(hex,16)
-}
-
-def String convertToHexString(n)
-{
-	String hex = String.format("%X", n.toInteger())
-}
-
-def String convertIPToHexString(ipString)
-{
-	String hex = ipString.tokenize(".").collect {
-    	String.format("%02X", it.toInteger())
-    }.join()
-}
-
-def Boolean canInstallLabs()
-{
-    return hasAllHubsOver("000.011.00603")
-}
-
-def Boolean hasAllHubsOver(String desiredFirmware)
-{
-    return realHubFirmwareVersions.every { fw -> fw >= desiredFirmware }
-}
-
-def List getRealHubFirmwareVersions()
-{
-    return location.hubs*.firmwareVersionString.findAll { it }
-}

smartapps/roomieremote-ratrigger/simple-sync-trigger.src/simple-sync-trigger.groovy

@@ -1,296 +0,0 @@
-/**
- *  Simple Sync Trigger
- *
- *  Copyright 2015 Roomie Remote, Inc.
- *
- *	Date: 2015-09-22
- */
-definition(
-    name: "Simple Sync Trigger",
-    namespace: "roomieremote-ratrigger",
-    author: "Roomie Remote, Inc.",
-    description: "Trigger Simple Control activities when certain actions take place in your home.",
-    category: "My Apps",
-    iconUrl: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-60.png",
-    iconX2Url: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-120.png",
-    iconX3Url: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-120.png")
-
-
-preferences {
-	page(name: "agentSelection", title: "Select your Simple Sync")
-	page(name: "refreshActivities", title: "Updating list of Simple Sync activities")
-    page(name: "control", title: "Run a Simple Control activity when something happens")
-	page(name: "timeIntervalInput", title: "Only during a certain time", install: true, uninstall: true) {
-		section {
-			input "starting", "time", title: "Starting", required: false
-			input "ending", "time", title: "Ending", required: false
-		}
-	}
-}
-
-def agentSelection()
-{
-	if (agent)
-    {
-		state.refreshCount = 0
-    }
-    
-	dynamicPage(name: "agentSelection", title: "Select your Simple Sync", nextPage: "control", install: false, uninstall: true) {
-		section {
-			input "agent", "capability.mediaController", title: "Simple Sync", required: true, multiple: false
-		}
-	}
-}
-
-def control()
-{
-	def activities = agent.latestValue('activities')
-    
-    if (!activities || !state.refreshCount)
-    {
-	    int refreshCount = !state.refreshCount ? 0 : state.refreshCount as int
-	    state.refreshCount = refreshCount + 1
-	    def refreshInterval = refreshCount == 0 ? 2 : 4
-		
-	    // Request activities every 5th attempt
-    	if((refreshCount % 5) == 0)
-        {
-    	    agent.getAllActivities()
-		}
-        
-        dynamicPage(name: "control", title: "Updating list of Simple Control activities", nextPage: "", refreshInterval: refreshInterval, install: false, uninstall: true) {
-        	section("") {
-            	paragraph "Retrieving activities from Simple Sync"
-            }
-        }
-	}
-	else
-    {
-	dynamicPage(name: "control", title: "Run a Simple Control activity when something happens", nextPage: "timeIntervalInput", install: false, uninstall: true) {
-		def anythingSet = anythingSet()
-		if (anythingSet) {
-			section("When..."){
-				ifSet "motion", "capability.motionSensor", title: "Motion Detected", required: false, multiple: true
-				ifSet "motionInactive", "capability.motionSensor", title: "Motion Stops", required: false, multiple: true
-				ifSet "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
-				ifSet "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
-				ifSet "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
-				ifSet "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true
-				ifSet "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true
-				ifSet "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true
-				ifSet "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true
-				ifSet "button1", "capability.button", title: "Button Press", required:false, multiple:true //remove from production
-				ifSet "triggerModes", "mode", title: "System Changes Mode", required: false, multiple: true
-				ifSet "timeOfDay", "time", title: "At a Scheduled Time", required: false
-			}
-		}
-		section(anythingSet ? "Select additional triggers" : "When...", hideable: anythingSet, hidden: true){
-			ifUnset "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true
-			ifUnset "motionInactive", "capability.motionSensor", title: "Motion Stops", required: false, multiple: true
-			ifUnset "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
-			ifUnset "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
-			ifUnset "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
-			ifUnset "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true
-			ifUnset "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true
-			ifUnset "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true
-			ifUnset "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true
-			ifUnset "button1", "capability.button", title: "Button Press", required:false, multiple:true //remove from production
-			ifUnset "triggerModes", "mode", title: "System Changes Mode", required: false, multiple: true
-			ifUnset "timeOfDay", "time", title: "At a Scheduled Time", required: false
-		}
-		section("Run this activity"){
-	        input "activity", "enum", title: "Activity?", required: true, options: new groovy.json.JsonSlurper().parseText(activities ?: "[]").activities?.collect { ["${it.uuid}": it.name] }
-		}
-        
-		section("More options", hideable: true, hidden: true) {
-			input "frequency", "decimal", title: "Minimum time between actions (defaults to every event)", description: "Minutes", required: false
-			href "timeIntervalInput", title: "Only during a certain time", description: timeLabel ?: "Tap to set", state: timeLabel ? "complete" : "incomplete"
-			input "days", "enum", title: "Only on certain days of the week", multiple: true, required: false,
-				options: ["Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"]
-			input "modes", "mode", title: "Only when mode is", multiple: true, required: false
-			input "oncePerDay", "bool", title: "Only once per day", required: false, defaultValue: false
-		}
-		section([mobileOnly:true]) {
-			label title: "Assign a name", required: false
-			mode title: "Set for specific mode(s)"
-		}
-	}
-    }
-}
-
-private anythingSet() {
-	for (name in ["motion","motionInactive","contact","contactClosed","acceleration","mySwitch","mySwitchOff","arrivalPresence","departurePresence","button1","triggerModes","timeOfDay"]) {
-		if (settings[name]) {
-			return true
-		}
-	}
-	return false
-}
-
-private ifUnset(Map options, String name, String capability) {
-	if (!settings[name]) {
-		input(options, name, capability)
-	}
-}
-
-private ifSet(Map options, String name, String capability) {
-	if (settings[name]) {
-		input(options, name, capability)
-	}
-}
-
-def installed() {
-	subscribeToEvents()
-}
-
-def updated() {
-	unsubscribe()
-	unschedule()
-	subscribeToEvents()
-}
-
-def subscribeToEvents() {
-	log.trace "subscribeToEvents()"
-	subscribe(app, appTouchHandler)
-	subscribe(contact, "contact.open", eventHandler)
-	subscribe(contactClosed, "contact.closed", eventHandler)
-	subscribe(acceleration, "acceleration.active", eventHandler)
-	subscribe(motion, "motion.active", eventHandler)
-	subscribe(motionInactive, "motion.inactive", eventHandler)
-	subscribe(mySwitch, "switch.on", eventHandler)
-	subscribe(mySwitchOff, "switch.off", eventHandler)
-	subscribe(arrivalPresence, "presence.present", eventHandler)
-	subscribe(departurePresence, "presence.not present", eventHandler)
-	subscribe(button1, "button.pushed", eventHandler)
-
-	if (triggerModes) {
-		subscribe(location, modeChangeHandler)
-	}
-
-	if (timeOfDay) {
-		schedule(timeOfDay, scheduledTimeHandler)
-	}
-}
-
-def eventHandler(evt) {
-	if (allOk) {
-		def lastTime = state[frequencyKey(evt)]
-		if (oncePerDayOk(lastTime)) {
-			if (frequency) {
-				if (lastTime == null || now() - lastTime >= frequency * 60000) {
-					startActivity(evt)
-				}
-				else {
-					log.debug "Not taking action because $frequency minutes have not elapsed since last action"
-				}
-			}
-			else {
-				startActivity(evt)
-			}
-		}
-		else {
-			log.debug "Not taking action because it was already taken today"
-		}
-	}
-}
-
-def modeChangeHandler(evt) {
-	log.trace "modeChangeHandler $evt.name: $evt.value ($triggerModes)"
-	if (evt.value in triggerModes) {
-		eventHandler(evt)
-	}
-}
-
-def scheduledTimeHandler() {
-	eventHandler(null)
-}
-
-def appTouchHandler(evt) {
-	startActivity(evt)
-}
-
-private startActivity(evt) {
-	agent.startActivity(activity)
-
-	if (frequency) {
-		state.lastActionTimeStamp = now()
-	}
-}
-
-private frequencyKey(evt) {
-	//evt.deviceId ?: evt.value
-	"lastActionTimeStamp"
-}
-
-private dayString(Date date) {
-	def df = new java.text.SimpleDateFormat("yyyy-MM-dd")
-	if (location.timeZone) {
-		df.setTimeZone(location.timeZone)
-	}
-	else {
-		df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
-	}
-	df.format(date)
-}
-
-private oncePerDayOk(Long lastTime) {
-	def result = true
-	if (oncePerDay) {
-		result = lastTime ? dayString(new Date()) != dayString(new Date(lastTime)) : true
-		log.trace "oncePerDayOk = $result"
-	}
-	result
-}
-
-// TODO - centralize somehow
-private getAllOk() {
-	modeOk && daysOk && timeOk
-}
-
-private getModeOk() {
-	def result = !modes || modes.contains(location.mode)
-	log.trace "modeOk = $result"
-	result
-}
-
-private getDaysOk() {
-	def result = true
-	if (days) {
-		def df = new java.text.SimpleDateFormat("EEEE")
-		if (location.timeZone) {
-			df.setTimeZone(location.timeZone)
-		}
-		else {
-			df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
-		}
-		def day = df.format(new Date())
-		result = days.contains(day)
-	}
-	log.trace "daysOk = $result"
-	result
-}
-
-private getTimeOk() {
-	def result = true
-	if (starting && ending) {
-		def currTime = now()
-		def start = timeToday(starting).time
-		def stop = timeToday(ending).time
-		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
-	}
-	log.trace "timeOk = $result"
-	result
-}
-
-private hhmm(time, fmt = "h:mm a")
-{
-	def t = timeToday(time, location.timeZone)
-	def f = new java.text.SimpleDateFormat(fmt)
-	f.setTimeZone(location.timeZone ?: timeZone(time))
-	f.format(t)
-}
-
-private timeIntervalLabel()
-{
-	(starting && ending) ? hhmm(starting) + "-" + hhmm(ending, "h:mm a z") : ""
-}

smartapps/roomieremote-roomieconnect/simple-control.src/simple-control.groovy

@@ -1,676 +0,0 @@
-/**
- *  Simple Control
- *
- *  Copyright 2015 Roomie Remote, Inc.
- *
- *	Date: 2015-09-22
- */
-
-definition(
-    name: "Simple Control",
-    namespace: "roomieremote-roomieconnect",
-    author: "Roomie Remote, Inc.",
-    description: "Integrate SmartThings with your Simple Control activities.",
-    category: "My Apps",
-    iconUrl: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-60.png",
-    iconX2Url: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-120.png",
-    iconX3Url: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-120.png")
-
-preferences()
-{
-	section("Allow Simple Control to Monitor and Control These Things...")
-    {
-    	input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
-  	}
-	
-	page(name: "mainPage", title: "Simple Control Setup", content: "mainPage", refreshTimeout: 5)
-	page(name:"agentDiscovery", title:"Simple Sync Discovery", content:"agentDiscovery", refreshTimeout:5)
-	page(name:"manualAgentEntry")
-	page(name:"verifyManualEntry")
-}
-
-mappings {
-	path("/devices") {
-    	action: [
-        	GET: "getDevices",
-            POST: "handleDevicesWithIDs"
-        ]
-	}
-    path("/device/:id") {
-    	action: [
-        	GET: "getDevice",
-            POST: "updateDevice"
-        ]
-    }
-	path("/subscriptions") {
-		action: [
-			GET: "listSubscriptions",
-			POST: "addSubscription", // {"deviceId":"xxx", "attributeName":"xxx","callbackUrl":"http://..."}
-            DELETE: "removeAllSubscriptions"
-		]
-	}
-	path("/subscriptions/:id") {
-		action: [
-			DELETE: "removeSubscription"
-		]
-	}
-}
-
-private getAllDevices()
-{
-	//log.debug("getAllDevices()")
-	([] + switches + locks + thermostats + imageCaptures + relaySwitches + doorControls + colorControls + musicPlayers + speechSynthesizers + switchLevels + indicators + mediaControllers + tones + tvs + alarms + valves + motionSensors + presenceSensors + beacons + pushButtons + smokeDetectors + coDetectors + contactSensors + accelerationSensors + energyMeters + powerMeters + lightSensors + humiditySensors + temperatureSensors + speechRecognizers + stepSensors + touchSensors)?.findAll()?.unique { it.id }
-}
-
-def getDevices()
-{
-	//log.debug("getDevices, params: ${params}")
-    allDevices.collect {
-    	//log.debug("device: ${it}")
-		deviceItem(it)
-	}
-}
-
-def getDevice()
-{
-	//log.debug("getDevice, params: ${params}")
-    def device = allDevices.find { it.id == params.id }
-    if (!device)
-    {
-    	render status: 404, data: '{"msg": "Device not found"}'
-    }
-    else
-    {
-    	deviceItem(device)
-    }
-}
-
-def handleDevicesWithIDs()
-{
-	//log.debug("handleDevicesWithIDs, params: ${params}")
-	def data = request.JSON
-	def ids = data?.ids?.findAll()?.unique()
-    //log.debug("ids: ${ids}")
-    def command = data?.command
-	def arguments = data?.arguments
-    if (command)
-    {
-    	def success = false
-	    //log.debug("command ${command}, arguments ${arguments}")
-    	for (devId in ids)
-        {
-			def device = allDevices.find { it.id == devId }
-			if (device) {
-				if (arguments) {
-					device."$command"(*arguments)
-				} else {
-					device."$command"()
-				}
-				success = true
-			} else {
-            	//log.debug("device not found ${devId}")
-			}
-		}
-        
-        if (success)
-        {
-        	render status: 200, data: "{}"
-        }
-        else
-        {
-        	render status: 404, data: '{"msg": "Device not found"}'
-        }
-    }
-    else
-    {
-		ids.collect {
-    		def currentId = it
-    		def device = allDevices.find { it.id == currentId }
-        	if (device)
-        	{
-        		deviceItem(device)
-    	    }
-   		}
-	}
-}
-
-private deviceItem(device) {
-	[
-		id: device.id,
-		label: device.displayName,
-		currentState: device.currentStates,
-		capabilities: device.capabilities?.collect {[
-			name: it.name
-		]},
-		attributes: device.supportedAttributes?.collect {[
-			name: it.name,
-			dataType: it.dataType,
-			values: it.values
-		]},
-		commands: device.supportedCommands?.collect {[
-			name: it.name,
-			arguments: it.arguments
-		]},
-		type: [
-			name: device.typeName,
-			author: device.typeAuthor
-		]
-	]
-}
-
-def updateDevice()
-{
-	//log.debug("updateDevice, params: ${params}")
-	def data = request.JSON
-	def command = data?.command
-	def arguments = data?.arguments
-
-	//log.debug("updateDevice, params: ${params}, request: ${data}")
-	if (!command) {
-		render status: 400, data: '{"msg": "command is required"}'
-	} else {
-		def device = allDevices.find { it.id == params.id }
-		if (device) {
-			if (arguments) {
-				device."$command"(*arguments)
-			} else {
-				device."$command"()
-			}
-			render status: 204, data: "{}"
-		} else {
-			render status: 404, data: '{"msg": "Device not found"}'
-		}
-	}
-}
-
-def listSubscriptions()
-{
-	//log.debug "listSubscriptions()"
-	app.subscriptions?.findAll { it.deviceId }?.collect {
-		def deviceInfo = state[it.deviceId]
-		def response = [
-			id: it.id,
-			deviceId: it.deviceId,
-			attributeName: it.data,
-			handler: it.handler
-		]
-		//if (!selectedAgent) {
-			response.callbackUrl = deviceInfo?.callbackUrl
-		//}
-		response
-	} ?: []
-}
-
-def addSubscription() {
-	def data = request.JSON
-	def attribute = data.attributeName
-	def callbackUrl = data.callbackUrl
-
-	//log.debug "addSubscription, params: ${params}, request: ${data}"
-	if (!attribute) {
-		render status: 400, data: '{"msg": "attributeName is required"}'
-	} else {
-		def device = allDevices.find { it.id == data.deviceId }
-		if (device) {
-			//if (!selectedAgent) {
-				//log.debug "Adding callbackUrl: $callbackUrl"
-				state[device.id] = [callbackUrl: callbackUrl]
-			//}
-			//log.debug "Adding subscription"
-			def subscription = subscribe(device, attribute, deviceHandler)
-			if (!subscription || !subscription.eventSubscription) {
-            	//log.debug("subscriptions: ${app.subscriptions}")
-                //for (sub in app.subscriptions)
-                //{
-                	//log.debug("subscription.id ${sub.id} subscription.handler ${sub.handler} subscription.deviceId ${sub.deviceId}")
-                    //log.debug(sub.properties.collect{it}.join('\n'))
-				//}
-				subscription = app.subscriptions?.find { it.device.id == data.deviceId && it.data == attribute && it.handler == 'deviceHandler' }
-			}
-
-			def response = [
-				id: subscription.id,
-				deviceId: subscription.device?.id,
-				attributeName: subscription.data,
-				handler: subscription.handler
-			]
-			//if (!selectedAgent) {
-				response.callbackUrl = callbackUrl
-			//}
-			response
-		} else {
-			render status: 400, data: '{"msg": "Device not found"}'
-		}
-	}
-}
-
-def removeSubscription()
-{
-	def subscription = app.subscriptions?.find { it.id == params.id }
-	def device = subscription?.device
-
-	//log.debug "removeSubscription, params: ${params}, subscription: ${subscription}, device: ${device}"
-	if (device) {
-		//log.debug "Removing subscription for device: ${device.id}"
-		state.remove(device.id)
-		unsubscribe(device)
-	}
-	render status: 204, data: "{}"
-}
-
-def removeAllSubscriptions()
-{
-	for (sub in app.subscriptions)
-    {
-    	//log.debug("Subscription: ${sub}")
-        //log.debug(sub.properties.collect{it}.join('\n'))
-        def handler = sub.handler
-        def device = sub.device
-        
-    	if (device && handler == 'deviceHandler')
-        {
-	        //log.debug(device.properties.collect{it}.join('\n'))
-        	//log.debug("Removing subscription for device: ${device}")
-            state.remove(device.id)
-            unsubscribe(device)
-        }
-    }
-}
-
-def deviceHandler(evt) {
-	def deviceInfo = state[evt.deviceId]
-	//if (selectedAgent) {
-    //	sendToRoomie(evt, agentCallbackUrl)
-	//} else if (deviceInfo) {
-    if (deviceInfo)
-    {
-		if (deviceInfo.callbackUrl) {
-			sendToRoomie(evt, deviceInfo.callbackUrl)
-		} else {
-			log.warn "No callbackUrl set for device: ${evt.deviceId}"
-		}
-	} else {
-		log.warn "No subscribed device found for device: ${evt.deviceId}"
-	}
-}
-
-def sendToRoomie(evt, String callbackUrl) {
-	def callback = new URI(callbackUrl)
-	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
-	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
-	sendHubCommand(new physicalgraph.device.HubAction(
-		method: "POST",
-		path: path,
-		headers: [
-			"Host": host,
-			"Content-Type": "application/json"
-		],
-		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
-	))
-}
-
-def mainPage()
-{
-	if (canInstallLabs())
-    {
-       	return agentDiscovery()
-    }
-    else
-    {
-        def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date.
-
-To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
-
-        return dynamicPage(name:"mainPage", title:"Upgrade needed!", nextPage:"", install:false, uninstall: true) {
-            section("Upgrade")
-            {
-                paragraph "$upgradeNeeded"
-            }
-        }
-    }
-}
-
-def agentDiscovery(params=[:])
-{
-	int refreshCount = !state.refreshCount ? 0 : state.refreshCount as int
-    state.refreshCount = refreshCount + 1
-    def refreshInterval = refreshCount == 0 ? 2 : 5
-	
-    if (!state.subscribe)
-    {
-        subscribe(location, null, locationHandler, [filterEvents:false])
-        state.subscribe = true
-    }
-	
-    //ssdp request every fifth refresh
-    if ((refreshCount % 5) == 0)
-    {
-        discoverAgents()
-    }
-	
-    def agentsDiscovered = agentsDiscovered()
-    
-    return dynamicPage(name:"agentDiscovery", title:"Pair with Simple Sync", nextPage:"", refreshInterval: refreshInterval, install:true, uninstall: true) {
-        section("Pair with Simple Sync")
-        {
-            input "selectedAgent", "enum", required:false, title:"Select Simple Sync\n(${agentsDiscovered.size() ?: 0} found)", multiple:false, options:agentsDiscovered
-        	href(name:"manualAgentEntry",
-            	 title:"Manually Configure Simple Sync",
-                 required:false,
-                 page:"manualAgentEntry")
-        }
-        section("Allow Simple Control to Monitor and Control These Things...")
-        {
-	    	input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
-	  	}
-    }
-}
-
-def manualAgentEntry()
-{
-	dynamicPage(name:"manualAgentEntry", title:"Manually Configure Simple Sync", nextPage:"verifyManualEntry", install:false, uninstall:true) {
-    	section("Manually Configure Simple Sync")
-        {
-        	paragraph "In the event that Simple Sync cannot be automatically discovered by your SmartThings hub, you may enter Simple Sync's IP address here."
-            input(name: "manualIPAddress", type: "text", title: "IP Address", required: true)
-        }
-    }
-}
-
-def verifyManualEntry()
-{
-    def hexIP = convertIPToHexString(manualIPAddress)
-    def hexPort = convertToHexString(47147)
-    def uuid = "593C03D2-1DA9-4CDB-A335-6C6DC98E56C3"
-    def hubId = ""
-    
-    for (hub in location.hubs)
-    {
-    	if (hub.localIP != null)
-        {
-        	hubId = hub.id
-            break
-        }
-    }
-    
-    def manualAgent = [deviceType: "04",
-    					mac: "unknown",
-    					ip: hexIP,
-                        port: hexPort,
-                        ssdpPath: "/upnp/Roomie.xml",
-                        ssdpUSN: "uuid:$uuid::urn:roomieremote-com:device:roomie:1",
-                        hub: hubId,
-                        verified: true,
-                        name: "Simple Sync $manualIPAddress"]
-	
-    state.agents[uuid] = manualAgent
-    
-    addOrUpdateAgent(state.agents[uuid])
-    
-    dynamicPage(name: "verifyManualEntry", title: "Manual Configuration Complete", nextPage: "", install:true, uninstall:true) {
-    	section("")
-        {
-        	paragraph("Tap Done to complete the installation process.")
-        }
-    }
-}
-
-def discoverAgents()
-{
-    def urn = getURN()
-    
-    sendHubCommand(new physicalgraph.device.HubAction("lan discovery $urn", physicalgraph.device.Protocol.LAN))
-}
-
-def agentsDiscovered()
-{
-    def gAgents = getAgents()
-    def agents = gAgents.findAll { it?.value?.verified == true }
-    def map = [:]
-    agents.each
-    {
-        map["${it.value.uuid}"] = it.value.name
-    }
-    map
-}
-
-def getAgents()
-{
-    if (!state.agents)
-    {
-    	state.agents = [:]
-    }
-    
-    state.agents
-}
-
-def installed()
-{
-	initialize()
-}
-
-def updated()
-{
-	initialize()
-}
-
-def initialize()
-{
-	if (state.subscribe)
-	{
-    	unsubscribe()
-		state.subscribe = false
-	}
-    
-    if (selectedAgent)
-    {
-    	addOrUpdateAgent(state.agents[selectedAgent])
-    }
-}
-
-def addOrUpdateAgent(agent)
-{
-	def children = getChildDevices()
-	def dni = agent.ip + ":" + agent.port
-    def found = false
-	
-	children.each
-	{
-		if ((it.getDeviceDataByName("mac") == agent.mac))
-		{
-        	found = true
-            
-            if (it.getDeviceNetworkId() != dni)
-            {
-				it.setDeviceNetworkId(dni)
-			}
-		}
-        else if (it.getDeviceNetworkId() == dni)
-        {
-        	found = true
-        }
-	}
-    
-	if (!found)
-	{
-        addChildDevice("roomieremote-agent", "Simple Sync", dni, agent.hub, [label: "Simple Sync"])
-	}
-}
-
-def locationHandler(evt)
-{
-    def description = evt?.description
-    def urn = getURN()
-    def hub = evt?.hubId
-    def parsedEvent = parseEventMessage(description)
-    
-    parsedEvent?.putAt("hub", hub)
-    
-    //SSDP DISCOVERY EVENTS
-	if (parsedEvent?.ssdpTerm?.contains(urn))
-	{
-        def agent = parsedEvent
-        def ip = convertHexToIP(agent.ip)
-        def agents = getAgents()
-        
-        agent.verified = true
-        agent.name = "Simple Sync $ip"
-        
-        if (!agents[agent.uuid])
-        {
-        	state.agents[agent.uuid] = agent
-        }
-    }
-}
-
-private def parseEventMessage(String description)
-{
-	def event = [:]
-	def parts = description.split(',')
-    
-	parts.each
-    { part ->
-		part = part.trim()
-		if (part.startsWith('devicetype:'))
-        {
-			def valueString = part.split(":")[1].trim()
-			event.devicetype = valueString
-		}
-		else if (part.startsWith('mac:'))
-        {
-			def valueString = part.split(":")[1].trim()
-			if (valueString)
-            {
-				event.mac = valueString
-			}
-		}
-		else if (part.startsWith('networkAddress:'))
-        {
-			def valueString = part.split(":")[1].trim()
-			if (valueString)
-            {
-				event.ip = valueString
-			}
-		}
-		else if (part.startsWith('deviceAddress:'))
-        {
-			def valueString = part.split(":")[1].trim()
-			if (valueString)
-            {
-				event.port = valueString
-			}
-		}
-		else if (part.startsWith('ssdpPath:'))
-        {
-			def valueString = part.split(":")[1].trim()
-			if (valueString)
-            {
-				event.ssdpPath = valueString
-			}
-		}
-		else if (part.startsWith('ssdpUSN:'))
-        {
-			part -= "ssdpUSN:"
-			def valueString = part.trim()
-			if (valueString)
-            {
-				event.ssdpUSN = valueString
-                
-                def uuid = getUUIDFromUSN(valueString)
-                
-                if (uuid)
-                {
-                	event.uuid = uuid
-                }
-			}
-		}
-		else if (part.startsWith('ssdpTerm:'))
-        {
-			part -= "ssdpTerm:"
-			def valueString = part.trim()
-			if (valueString)
-            {
-				event.ssdpTerm = valueString
-			}
-		}
-		else if (part.startsWith('headers'))
-        {
-			part -= "headers:"
-			def valueString = part.trim()
-			if (valueString)
-            {
-				event.headers = valueString
-			}
-		}
-		else if (part.startsWith('body'))
-        {
-			part -= "body:"
-			def valueString = part.trim()
-			if (valueString)
-            {
-				event.body = valueString
-			}
-		}
-	}
-
-	event
-}
-
-def getURN()
-{
-    return "urn:roomieremote-com:device:roomie:1"
-}
-
-def getUUIDFromUSN(usn)
-{
-	def parts = usn.split(":")
-	
-	for (int i = 0; i < parts.size(); ++i)
-	{
-		if (parts[i] == "uuid")
-		{
-			return parts[i + 1]
-		}
-	}
-}
-
-def String convertHexToIP(hex)
-{
-	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
-}
-
-def Integer convertHexToInt(hex)
-{
-	Integer.parseInt(hex,16)
-}
-
-def String convertToHexString(n)
-{
-	String hex = String.format("%X", n.toInteger())
-}
-
-def String convertIPToHexString(ipString)
-{
-	String hex = ipString.tokenize(".").collect {
-    	String.format("%02X", it.toInteger())
-    }.join()
-}
-
-def Boolean canInstallLabs()
-{
-    return hasAllHubsOver("000.011.00603")
-}
-
-def Boolean hasAllHubsOver(String desiredFirmware)
-{
-    return realHubFirmwareVersions.every { fw -> fw >= desiredFirmware }
-}
-
-def List getRealHubFirmwareVersions()
-{
-    return location.hubs*.firmwareVersionString.findAll { it }
-}
-
-
-
-

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -463,32 +463,29 @@ def pollChildren(child = null) {
 }
 
 // Poll Child is invoked from the Child Device itself as part of the Poll Capability
-def pollChild(){
+def pollChild(child){
 
-	def devices = getChildDevices()
-
-	if (pollChildren()){
-		devices.each { child ->
-			if (!child.device.deviceNetworkId.startsWith("ecobee_sensor")){
-				if(atomicState.thermostats[child.device.deviceNetworkId] != null) {
-					def tData = atomicState.thermostats[child.device.deviceNetworkId]
-					log.info "pollChild(child)>> data for ${child.device.deviceNetworkId} : ${tData.data}"
-					child.generateEvent(tData.data) //parse received message from parent
-				} else if(atomicState.thermostats[child.device.deviceNetworkId] == null) {
-					log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId}"
-					return null
-				}
+	if (pollChildren(child)){
+		if (!child.device.deviceNetworkId.startsWith("ecobee_sensor")){
+			if(atomicState.thermostats[child.device.deviceNetworkId] != null) {
+				def tData = atomicState.thermostats[child.device.deviceNetworkId]
+				log.info "pollChild(child)>> data for ${child.device.deviceNetworkId} : ${tData.data}"
+				child.generateEvent(tData.data) //parse received message from parent
+			} else if(atomicState.thermostats[child.device.deviceNetworkId] == null) {
+				log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId}"
+				return null
 			}
 		}
 	} else {
-		log.info "ERROR: pollChildren()"
+		log.info "ERROR: pollChildren(child) for ${child.device.deviceNetworkId} after polling"
 		return null
 	}
 
 }
 
 void poll() {
-	pollChild()
+	def devices = getChildDevices()
+	devices.each {pollChild(it)}
 }
 
 def availableModes(child) {

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -24,7 +24,7 @@ definition(
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
-    singleInstance: true
+        //singleInstance: true
 )
 
 preferences {
@@ -60,7 +60,7 @@ def bridgeDiscovery(params=[:])
         app.updateSetting("selectedHue", "")
     }
 
-	ssdpSubscribe()
+	subscribe(location, null, locationHandler, [filterEvents:false])
 
 	//bridge discovery request every 15 //25 seconds
 	if((bridgeRefreshCount % 5) == 0) {
@@ -68,7 +68,7 @@ def bridgeDiscovery(params=[:])
 	}
 
 	//setup.xml request every 3 seconds except on discoveries
-	if(((bridgeRefreshCount % 3) == 0) && ((bridgeRefreshCount % 5) != 0)) {
+	if(((bridgeRefreshCount % 1) == 0) && ((bridgeRefreshCount % 5) != 0)) {
 		verifyHueBridges()
 	}
 
@@ -152,10 +152,6 @@ private discoverBridges() {
 	sendHubCommand(new physicalgraph.device.HubAction("lan discovery urn:schemas-upnp-org:device:basic:1", physicalgraph.device.Protocol.LAN))
 }
 
-void ssdpSubscribe() {
-	subscribe(location, "ssdpTerm.urn:schemas-upnp-org:device:basic:1", ssdpBridgeHandler)
-}
-
 private sendDeveloperReq() {
 	def token = app.id
     def host = getBridgeIP()
@@ -165,7 +161,7 @@ private sendDeveloperReq() {
 		headers: [
 			HOST: host
 		],
-		body: [devicetype: "$token-0"]], "${selectedHue}", [callback: "usernameHandler"]))
+		body: [devicetype: "$token-0", username: "$token-0"]], "${selectedHue}"))
 }
 
 private discoverHueBulbs() {
@@ -175,17 +171,16 @@ private discoverHueBulbs() {
 		path: "/api/${state.username}/lights",
 		headers: [
 			HOST: host
-		]], "${selectedHue}", [callback: "lightsHandler"]))
+		]], "${selectedHue}"))
 }
 
 private verifyHueBridge(String deviceNetworkId, String host) {
-	log.trace "Verify Hue Bridge $deviceNetworkId"
 	sendHubCommand(new physicalgraph.device.HubAction([
 		method: "GET",
 		path: "/description.xml",
 		headers: [
 			HOST: host
-		]], deviceNetworkId, [callback: "bridgeDescriptionHandler"]))
+		]], deviceNetworkId))
 }
 
 private verifyHueBridges() {
@@ -293,51 +288,17 @@ def bulbListHandler(hub, data = "") {
         def object = new groovy.json.JsonSlurper().parseText(data)
         object.each { k,v ->
             if (v instanceof Map)
-                bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:hub]
+                bulbs[k] = [id: k, name: v.name, type: v.type, hub:hub]
         }
     }
     def bridge = null
-	if (selectedHue) {
-		bridge = getChildDevice(selectedHue)
-	}
+	if (selectedHue)
+        bridge = getChildDevice(selectedHue)
     bridge.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
     msg = "${bulbs.size()} bulbs found. ${bulbs}"
 	return msg
 }
 
-private upgradeDeviceType(device, newHueType) {
-	def deviceType = getDeviceType(newHueType)
-
-	// Automatically change users Hue bulbs to correct device types
-	if (deviceType && !(device?.typeName?.equalsIgnoreCase(deviceType))) {
-		log.debug "Update device type: \"$device.label\" ${device?.typeName}->$deviceType"
-		device.setDeviceType(deviceType)
-	}
-}
-
-private getDeviceType(hueType) {
-	// Determine ST device type based on Hue classification of light
-	if (hueType?.equalsIgnoreCase("Dimmable light"))
-		return "Hue Lux Bulb"
-	else if (hueType?.equalsIgnoreCase("Extended Color Light"))
-		return "Hue Bulb"
-	else if (hueType?.equalsIgnoreCase("Color Light"))
-		return "Hue Bloom"
-	else
-		return null
-}
-
-private addChildBulb(dni, hueType, name, hub, update=false, device = null) {
-	def deviceType = getDeviceType(hueType)
-
-	if (deviceType) {
-		return addChildDevice("smartthings", deviceType, dni, hub, ["label": name])
-	} else {
-		log.warn "Device type $hueType not supported"
-		return null
-	}
-}
-
 def addBulbs() {
 	def bulbs = getHueBulbs()
 	selectedBulbs?.each { dni ->
@@ -347,26 +308,29 @@ def addBulbs() {
 			if (bulbs instanceof java.util.Map) {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
                 if (newHueBulb != null) {
-                    d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
-					if (d) {
-						log.debug "created ${d.displayName} with id $dni"
-						d.refresh()
-					}
+                    if (newHueBulb?.value?.type?.equalsIgnoreCase("Dimmable light") ) {
+                        d = addChildDevice("smartthings", "Hue Lux Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
+                    } else {
+                        d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
+                    }
+                    log.debug "created ${d.displayName} with id $dni"
+                    d.refresh()
                 } else {
                 	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
                 }
 			} else {
             	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
-				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
-				d?.refresh()
+				d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.hub, ["label":newHueBulb?.name])
+                d.refresh()
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
 			if (bulbs instanceof java.util.Map) {
-				// Update device type if incorrect
             	def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
-				upgradeDeviceType(d, newHueBulb?.value?.type)
+				if (newHueBulb?.value?.type?.equalsIgnoreCase("Dimmable light") && d.typeName == "Hue Bulb") {
+					d.setDeviceType("Hue Lux Bulb")
+				}
 			}
 		}
 	}
@@ -388,9 +352,8 @@ def addBridge() {
                     	def oldDNI = it.deviceNetworkId
                         log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
                         it.setDeviceNetworkId("${newDNI}")
-						if (oldDNI == selectedHue) {
-							app.updateSetting("selectedHue", newDNI)
-						}
+                        if (oldDNI == selectedHue)
+                        	app.updateSetting("selectedHue", newDNI)
                         newbridge = false
                     }
                 }
@@ -419,111 +382,6 @@ def addBridge() {
 	}
 }
 
-def ssdpBridgeHandler(evt) {
-	def description = evt.description
-	log.trace "Location: $description"
-
-	def hub = evt?.hubId
-	def parsedEvent = parseLanMessage(description)
-	parsedEvent << ["hub":hub]
-
-	def bridges = getHueBridges()
-	log.trace bridges.toString()
-	if (!(bridges."${parsedEvent.ssdpUSN.toString()}")) {
-		//bridge does not exist
-		log.trace "Adding bridge ${parsedEvent.ssdpUSN}"
-		bridges << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
-	} else {
-		// update the values
-		def ip = convertHexToIP(parsedEvent.networkAddress)
-		def port = convertHexToInt(parsedEvent.deviceAddress)
-		def host = ip + ":" + port
-		log.debug "Device ($parsedEvent.mac) was already found in state with ip = $host."
-		def dstate = bridges."${parsedEvent.ssdpUSN.toString()}"
-		def dni = "${parsedEvent.mac}"
-		def d = getChildDevice(dni)
-		def networkAddress = null
-		if (!d) {
-			childDevices.each {
-				if (it.getDeviceDataByName("mac")) {
-					def newDNI = "${it.getDeviceDataByName("mac")}"
-					if (newDNI != it.deviceNetworkId) {
-						def oldDNI = it.deviceNetworkId
-						log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
-						it.setDeviceNetworkId("${newDNI}")
-						if (oldDNI == selectedHue) {
-							app.updateSetting("selectedHue", newDNI)
-						}
-						doDeviceSync()
-					}
-				}
-			}
-		} else {
-			if (d.getDeviceDataByName("networkAddress")) {
-				networkAddress = d.getDeviceDataByName("networkAddress")
-			} else {
-				networkAddress = d.latestState('networkAddress').stringValue
-			}
-			log.trace "Host: $host - $networkAddress"
-			if (host != networkAddress) {
-				log.debug "Device's port or ip changed for device $d..."
-				dstate.ip = ip
-				dstate.port = port
-				dstate.name = "Philips hue ($ip)"
-				d.sendEvent(name:"networkAddress", value: host)
-				d.updateDataValue("networkAddress", host)
-			}
-		}
-	}
-}
-
-void bridgeDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
-	log.trace "description.xml response (application/xml)"
-	def body = hubResponse.xml
-	if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
-		def bridges = getHueBridges()
-		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
-		if (bridge) {
-			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
-		} else {
-			log.error "/description.xml returned a bridge that didn't exist"
-		}
-	}
-}
-
-void lightsHandler(physicalgraph.device.HubResponse hubResponse) {
-	if (isValidSource(hubResponse.mac)) {
-		def body = hubResponse.json
-		if (!body?.state?.on) { //check if first time poll made it here by mistake
-			def bulbs = getHueBulbs()
-			log.debug "Adding bulbs to state!"
-			body.each { k, v ->
-				bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub: hubResponse.hubId]
-			}
-		}
-	}
-}
-
-void usernameHandler(physicalgraph.device.HubResponse hubResponse) {
-	if (isValidSource(hubResponse.mac)) {
-		def body = hubResponse.json
-		if (body.success != null) {
-			if (body.success[0] != null) {
-				if (body.success[0].username)
-					state.username = body.success[0].username
-			}
-		} else if (body.error != null) {
-			//TODO: handle retries...
-			log.error "ERROR: application/json ${body.error}"
-		}
-	}
-}
-
-/**
- * @deprecated This has been replaced by the combination of {@link #ssdpBridgeHandler()}, {@link #bridgeDescriptionHandler()},
- * {@link #lightsHandler()}, and {@link #usernameHandler()}. After a pending event subscription migration, it can be removed.
- */
-@Deprecated
 def locationHandler(evt) {
 	def description = evt.description
     log.trace "Location: $description"
@@ -559,19 +417,17 @@ def locationHandler(evt) {
                             def oldDNI = it.deviceNetworkId
                             log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
                             it.setDeviceNetworkId("${newDNI}")
-							if (oldDNI == selectedHue) {
-								app.updateSetting("selectedHue", newDNI)
-							}
+                            if (oldDNI == selectedHue)
+                                app.updateSetting("selectedHue", newDNI)
                             doDeviceSync()
                         }
                     }
                 }
 			} else {
-				if (d.getDeviceDataByName("networkAddress")) {
-					networkAddress = d.getDeviceDataByName("networkAddress")
-				} else {
-					networkAddress = d.latestState('networkAddress').stringValue
-				}
+            	if (d.getDeviceDataByName("networkAddress"))
+                	networkAddress = d.getDeviceDataByName("networkAddress")
+            	else
+                	networkAddress = d.latestState('networkAddress').stringValue
                 log.trace "Host: $host - $networkAddress"
                 if(host != networkAddress) {
                     log.debug "Device's port or ip changed for device $d..."
@@ -604,9 +460,8 @@ def locationHandler(evt) {
 			def body = new groovy.json.JsonSlurper().parseText(parsedEvent.body)
 			if (body.success != null) {
 				if (body.success[0] != null) {
-					if (body.success[0].username) {
+					if (body.success[0].username)
 						state.username = body.success[0].username
-					}
 				}
 			} else if (body.error != null) {
 				//TODO: handle retries...
@@ -617,7 +472,7 @@ def locationHandler(evt) {
 					def bulbs = getHueBulbs()
 					log.debug "Adding bulbs to state!"
 					body.each { k,v ->
-						bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:parsedEvent.hub]
+						bulbs[k] = [id: k, name: v.name, type: v.type, hub:parsedEvent.hub]
 					}
 				}
 			}
@@ -631,7 +486,11 @@ def doDeviceSync(){
 	log.trace "Doing Hue Device Sync!"
 	convertBulbListToMap()
 	poll()
-	ssdpSubscribe()
+    try {
+		subscribe(location, null, locationHandler, [filterEvents:false])
+    } catch (all) {
+    	log.trace "Subscription already exist"
+ 	}
 	discoverBridges()
 }
 
@@ -743,20 +602,6 @@ def parse(childDevice, description) {
 	}
 }
 
-def hubVerification(bodytext) {
-	log.trace "Bridge sent back description.xml for verification"
-    def body = new XmlSlurper().parseText(bodytext)
-    if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
-        def bridges = getHueBridges()
-        def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
-        if (bridge) {
-            bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
-        } else {
-            log.error "/description.xml returned a bridge that didn't exist"
-        }
-    }
-}
-
 def on(childDevice) {
 	log.debug "Executing 'on'"
 	put("lights/${getId(childDevice)}/state", [on: true])
@@ -797,53 +642,35 @@ def setColorTemperature(childDevice, huesettings) {
 }
 
 def setColor(childDevice, huesettings) {
-    log.debug "Executing 'setColor($huesettings)'"
-    
-    def value = [:]
-    def hue = null
-    def sat = null
-    def xy = null
-    
-    if (huesettings.hex != null) {
-        value.xy = getHextoXY(huesettings.hex)
-    } else {
-        if (huesettings.hue != null)
-            value.hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
-        if (huesettings.saturation != null)   
-            value.sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
-    }
-    
-    // Default behavior is to turn light on 
-    value.on = true
+	log.debug "Executing 'setColor($huesettings)'"
+	def hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
+	def sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
+    def alert = huesettings.alert ? huesettings.alert : "none"
+    def transition = huesettings.transition ? huesettings.transition : 4
 
-    if (huesettings.level != null) {
-        if (huesettings.level <= 0)
-            value.on = false
-        else if (huesettings.level == 1)
-            value.bri = 1
-        else 
-            value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
-    }
-    value.alert = huesettings.alert ? huesettings.alert : "none"
-    value.transitiontime = huesettings.transitiontime ? huesettings.transitiontime : 4
+	def value = [sat: sat, hue: hue, alert: alert, transitiontime: transition]
+	if (huesettings.level != null) {
+        if (huesettings.level == 1) value.bri = 1 else value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
+		value.on = value.bri > 0
+	}
 
-    // Make sure to turn off light if requested
-    if (huesettings.switch == "off")
-        value.on = false
+	if (huesettings.switch) {
+		value.on = huesettings.switch == "on"
+	}
 
-    log.debug "sending command $value"
-    put("lights/${getId(childDevice)}/state", value)
-    return "Color set to $value"
+	log.debug "sending command $value"
+	put("lights/${getId(childDevice)}/state", value)
 }
 
 def nextLevel(childDevice) {
-    def level = device.latestValue("level") as Integer ?: 0
-    if (level < 100) {
-        level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
-    } else {
-        level = 25
-    }
-    setLevel(childDevice,level)
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level < 100) {
+		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
+	}
+	else {
+		level = 25
+	}
+	setLevel(childDevice,level)
 }
 
 private getId(childDevice) {
@@ -858,11 +685,15 @@ private getId(childDevice) {
 private poll() {
 	def host = getBridgeIP()
 	def uri = "/api/${state.username}/lights/"
-	log.debug "GET: $host$uri"
-	sendHubCommand(new physicalgraph.device.HubAction("""GET ${uri} HTTP/1.1
+    try {
+		sendHubCommand(new physicalgraph.device.HubAction("""GET ${uri} HTTP/1.1
 HOST: ${host}
 
 """, physicalgraph.device.Protocol.LAN, selectedHue))
+	} catch (all) {
+        log.warn "Parsing Body failed - trying again..."
+        doDeviceSync()
+    }
 }
 
 private put(path, body) {
@@ -912,57 +743,6 @@ private getBridgeIP() {
     return host
 }
 
-private getHextoXY(String colorStr) {
-    // For the hue bulb the corners of the triangle are:
-    // -Red: 0.675, 0.322
-    // -Green: 0.4091, 0.518
-    // -Blue: 0.167, 0.04
-
-    def cred = Integer.valueOf( colorStr.substring( 1, 3 ), 16 )
-    def cgreen = Integer.valueOf( colorStr.substring( 3, 5 ), 16 )
-    def cblue = Integer.valueOf( colorStr.substring( 5, 7 ), 16 )
-
-    double[] normalizedToOne = new double[3];
-    normalizedToOne[0] = (cred / 255);
-    normalizedToOne[1] = (cgreen / 255);
-    normalizedToOne[2] = (cblue / 255);
-    float red, green, blue;
-
-    // Make red more vivid
-    if (normalizedToOne[0] > 0.04045) {
-        red = (float) Math.pow(
-                (normalizedToOne[0] + 0.055) / (1.0 + 0.055), 2.4);
-    } else {
-        red = (float) (normalizedToOne[0] / 12.92);
-    }
-
-    // Make green more vivid
-    if (normalizedToOne[1] > 0.04045) {
-        green = (float) Math.pow((normalizedToOne[1] + 0.055) / (1.0 + 0.055), 2.4);
-    } else {
-        green = (float) (normalizedToOne[1] / 12.92);
-    }
-
-    // Make blue more vivid
-    if (normalizedToOne[2] > 0.04045) {
-        blue = (float) Math.pow((normalizedToOne[2] + 0.055) / (1.0 + 0.055), 2.4);
-    } else {
-        blue = (float) (normalizedToOne[2] / 12.92);
-    }
-
-    float X = (float) (red * 0.649926 + green * 0.103455 + blue * 0.197109);
-    float Y = (float) (red * 0.234327 + green * 0.743075 + blue * 0.022598);
-    float Z = (float) (red * 0.0000000 + green * 0.053077 + blue * 1.035763);
-
-    float x = (X != 0 ? X / (X + Y + Z) : 0);
-    float y = (Y != 0 ? Y / (X + Y + Z) : 0);
-
-    double[] xy = new double[2];
-    xy[0] = x;
-    xy[1] = y;
-    return xy;
-}
-
 private Integer convertHexToInt(hex) {
 	Integer.parseInt(hex,16)
 }
@@ -972,7 +752,7 @@ def convertBulbListToMap() {
 		if (state.bulbs instanceof java.util.List) {
 			def map = [:]
 			state.bulbs.unique {it.id}.each { bulb ->
-				map << ["${bulb.id}":["id":bulb.id, "name":bulb.name, "type": bulb.type, "modelid": bulb.modelid, "hub":bulb.hub]]
+				map << ["${bulb.id}":["id":bulb.id, "name":bulb.name, "hub":bulb.hub]]
 			}
 			state.bulbs = map
 		}

smartapps/smartthings/notify-me-when.src/i18n/messages.properties

@@ -1,31 +1,31 @@
-'''Acceleration Detected'''.ko=가속이 감지되었을 때
-'''Arrival Of'''.ko=도착했을 때
-'''Both Push and SMS?'''.ko=푸시 알람과 SMS 모두 사용
-'''Button Pushed'''.ko=버튼이 눌렸을 때
-'''Contact Closes'''.ko=닫힘이 감지되었을 때
-'''Contact Opens'''.ko=열림이 감지되었을 때
-'''Departure Of'''.ko=출발할 때
+'''Acceleration Detected'''.ko=가속화 감지됨
+'''Arrival Of'''.ko=도착
+'''Both Push and SMS?'''.ko=푸시 메시지와 SMS를 모두 사용하시겠습니까?
+'''Button Pushed'''.ko=버튼이 눌렸습니다
+'''Contact Closes'''.ko=접점 닫힘
+'''Contact Opens'''.ko=접점 열림
+'''Departure Of'''.ko=출발
 '''Message Text'''.ko=문자 메시지
-'''Minutes'''.ko=메시지 전송 간격(분)
-'''Motion Here'''.ko=움직임이 감지되었을 때
-'''Phone Number (for SMS, optional)'''.ko=전화번호 (옵션)
+'''Minutes'''.ko=분
+'''Motion Here'''.ko=동작
+'''Phone Number (for SMS, optional)'''.ko=휴대전화 번호(문자 메시지 - 옵션)
 '''Receive notifications when anything happens in your home.'''.ko=집 안에 무슨 일이 일어나면 알림이 전송됩니다.
-'''Smoke Detected'''.ko=연기가 감지되었을 때
-'''Switch Turned Off'''.ko=스위치가 꺼졌을 때
-'''Switch Turned On'''.ko=스위치가 켜졌을 때
-'''Choose one or more, when...'''.ko=다음 상황 중 하나 이상 선택
+'''Smoke Detected'''.ko=연기가 감지되었습니다
+'''Switch Turned Off'''.ko=스위치 꺼짐
+'''Switch Turned On'''.ko=스위치 꺼짐
+'''Choose one or more, when...'''.ko=다음의 경우 하나 이상 선택
 '''Yes'''.ko=예
 '''No'''.ko=아니요
-'''Send this message (optional, sends standard status message if not specified)'''.ko=메시지 작성 (작성하지 않을 경우 디폴트 메시지 전송)
-'''Via a push notification and/or an SMS message'''.ko=푸시 알람 및 SMS 설정
-'''Set for specific mode(s)'''.ko=특정 상태 설정
+'''Send this message (optional, sends standard status message if not specified)'''.ko=이 메시지 전송(선택적, 지정되지 않은 경우 표준 상태 메시지를 보냅니다)
+'''Via a push notification and/or an SMS message'''.ko=푸시 알림 및/또는 문자 메시지를 통해
+'''Set for specific mode(s)'''.ko=특정 모드 설정
 '''Tap to set'''.ko=눌러서 설정
-'''Minimum time between messages (optional, defaults to every message)'''.ko=메시지 전송 간격 설정
-'''If outside the US please make sure to enter the proper country code'''.ko=미국 이외 국가에 거주한다면 국가 코드와 함께 입력하여 주세요.
-'''Water Sensor Wet'''.ko=누수가 감지되었을 때
-'''{{ triggerEvent.linkText }} has arrived at the {{ location.name }}'''.ko={{ location.name }}에 {{ triggerEvent.linkText }} 귀가
-'''{{ triggerEvent.linkText }} has arrived at {{ location.name }}'''.ko={{ location.name }}에 {{ triggerEvent.linkText }} 귀가
-'''{{ triggerEvent.linkText }} has left the {{ location.name }}'''.ko={{ location.name }}에서 {{ triggerEvent.linkText }} 외출
-'''{{ triggerEvent.linkText }} has left {{ location.name }}'''.ko={{ location.name }}에서 {{ triggerEvent.linkText }} 외출
-'''Assign a name'''.ko=이름 설정
-'''Choose Modes'''.ko=상태 선택
+'''Minimum time between messages (optional, defaults to every message)'''.ko=메시지작 간 최소 시간(선택 사항, 모든 메시지의 기본 설정)
+'''If outside the US please make sure to enter the proper country code'''.ko=미국 이외 거주자는 적절한 국가 코드를 입력했는지 확인하십시오
+'''Water Sensor Wet'''.ko=Water Sensor에서 물이 감지되었습니다
+'''{{ triggerEvent.linkText }} has arrived at the {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}에 도착했습니다
+'''{{ triggerEvent.linkText }} has arrived at {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}에 도착했습니다
+'''{{ triggerEvent.linkText }} has left the {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}을(를) 떠났습니다
+'''{{ triggerEvent.linkText }} has left {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}을(를) 떠났습니다
+'''Assign a name'''.ko=이름 배정
+'''Choose Modes'''.ko=모드 선택

smartapps/smartthings/speaker-notify-with-sound.src/speaker-notify-with-sound.groovy

@@ -76,7 +76,7 @@ def mainPage() {
 		}
 		section{
 			input "actionType", "enum", title: "Action?", required: true, defaultValue: "Bell 1", options: [
-				"Custom Message",
+				//"Custom Message",
 				"Bell 1",
 				"Bell 2",
 				"Dogs Barking",
@@ -89,7 +89,7 @@ def mainPage() {
 				"Someone is arriving",
 				"Piano",
 				"Lightsaber"]
-			input "message","text",title:"Play this message", required:false, multiple: false
+			//input "message","text",title:"Play this message", required:false, multiple: false
 		}
 		section {
 			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
@@ -408,15 +408,13 @@ private loadText() {
 		case "Lightsaber":
 			state.sound = [uri: "http://s3.amazonaws.com/smartapp-media/sonos/lightsaber.mp3", duration: "10"]
 			break;
-		case "Custom Message":
-			if (message) {
+		default:
+			/*if (message) {
 				state.sound = textToSpeech(message instanceof List ? message[0] : message) // not sure why this is (sometimes) needed)
 			}
 			else {
 				state.sound = textToSpeech("You selected the custom message option but did not enter a message in the $app.label Smart App")
-			}
-			break;
-		default:
+			}*/
 			state.sound = [uri: "http://s3.amazonaws.com/smartapp-media/sonos/bell1.mp3", duration: "10"]
 			break;
 	}

smartapps/smartthings/tile-ux/device-tile-controller.src/device-tile-controller.groovy

@@ -1,107 +0,0 @@
-/**
- *  Device Tile Controller
- *
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Device Tile Controller",
-    namespace: "smartthings/tile-ux",
-    author: "SmartThings",
-    description: "A controller SmartApp to install virtual devices into your location in order to simulate various native Device Tiles.",
-    category: "SmartThings Internal",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    singleInstance: true)
-
-
-preferences {
-    // landing page
-    page(name: "defaultPage")
-}
-
-def defaultPage() {
-    dynamicPage(name: "defaultPage", install: true, uninstall: true) {
-        section {
-            paragraph "Select on Unselect the devices that you want to install"
-        }
-        section(title: "Multi Attribute Tile Types") {
-            input(type: "bool", name: "genericDeviceTile", title: "generic", description: "A device that showcases the various use of generic multi-attribute-tiles.", defaultValue: "false")
-            input(type: "bool", name: "lightingDeviceTile", title: "lighting", description: "A device that showcases the various use of lighting multi-attribute-tiles.", defaultValue: "false")
-            input(type: "bool", name: "thermostatDeviceTile", title: "thermostat", description: "A device that showcases the various use of thermostat multi-attribute-tiles.", defaultValue: "true")
-            input(type: "bool", name: "mediaPlayerDeviceTile", title: "media player", description: "A device that showcases the various use of mediaPlayer multi-attribute-tiles.", defaultValue: "false")
-            input(type: "bool", name: "videoPlayerDeviceTile", title: "video player", description: "A device that showcases the various use of videoPlayer multi-attribute-tiles.", defaultValue: "false")
-        }
-        section(title: "Device Tile Types") {
-            input(type: "bool", name: "standardDeviceTile", title: "standard device tiles", description: "A device that showcases the various use of standard device tiles.", defaultValue: "false")
-            input(type: "bool", name: "valueDeviceTile", title: "value device tiles", description: "A device that showcases the various use of value device tiles.", defaultValue: "false")
-            input(type: "bool", name: "presenceDeviceTile", title: "presence device tiles", description: "A device that showcases the various use of color control device tile.", defaultValue: "false")
-        }
-        section(title: "Other Tile Types") {
-            input(type: "bool", name: "carouselDeviceTile", title: "image carousel", description: "A device that showcases the various use of carousel device tile.", defaultValue: "false")
-            input(type: "bool", name: "sliderDeviceTile", title: "slider", description: "A device that showcases the various use of slider device tile.", defaultValue: "false")
-            input(type: "bool", name: "colorWheelDeviceTile", title: "color wheel", description: "A device that showcases the various use of color wheel device tile.", defaultValue: "false")
-        }
-    }
-}
-
-def installed() {
-    log.debug "Installed with settings: ${settings}"
-}
-
-def uninstalled() {
-    getChildDevices().each {
-        deleteChildDevice(it.deviceNetworkId)
-    }
-}
-
-def updated() {
-    log.debug "Updated with settings: ${settings}"
-    unsubscribe()
-    initializeDevices()
-}
-
-def initializeDevices() {
-    settings.each { key, value ->
-        log.debug "$key : $value"
-        def existingDevice = getChildDevices().find { it.name == key }
-        log.debug "$existingDevice"
-        if (existingDevice && !value) {
-            deleteChildDevice(existingDevice.deviceNetworkId)
-        } else if (!existingDevice && value) {
-            String dni = UUID.randomUUID()
-            log.debug "$dni"
-            addChildDevice(app.namespace, key, dni, null, [
-                label: labelMap()[key] ?: key,
-                completedSetup: true
-            ])
-        }
-    }
-}
-
-// Map the name of the Device to a proper Label
-def labelMap() {
-    [
-        genericDeviceTile: "Tile Multiattribute Generic",
-        lightingDeviceTile: "Tile Multiattribute Lighting",
-        thermostatDeviceTile: "Tile Multiattribute Thermostat",
-        mediaPlayerDeviceTile: "Tile Multiattribute Media Player",
-        videoPlayerDeviceTile: "Tile Multiattribute Video Player",
-        standardDeviceTile: "Tile Device Standard",
-        valueDeviceTile: "Tile Device Value",
-        presenceDeviceTile: "Tile Device Presence",
-        carouselDeviceTile: "Tile Device Carousel",
-        sliderDeviceTile: "Tile Device Slider",
-        colorWheelDeviceTile: "Tile Device Color Wheel"
-    ]
-}

smartapps/smartthings/wemo-connect.src/wemo-connect.groovy

@@ -234,25 +234,26 @@ def addSwitches() {
 		def d
 		if (selectedSwitch) {
 			d = getChildDevices()?.find {
-				it.deviceNetworkId == selectedSwitch.value.mac || it.device.getDataValue("mac") == selectedSwitch.value.mac
-			}
-			if (!d) {
-				log.debug "Creating WeMo Switch with dni: ${selectedSwitch.value.mac}"
-				d = addChildDevice("smartthings", "Wemo Switch", selectedSwitch.value.mac, selectedSwitch?.value.hub, [
-					"label": selectedSwitch?.value?.name ?: "Wemo Switch",
-					"data": [
-						"mac": selectedSwitch.value.mac,
-						"ip": selectedSwitch.value.ip,
-						"port": selectedSwitch.value.port
-					]
-				])
-				def ipvalue = convertHexToIP(selectedSwitch.value.ip)
-				d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
-				log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
-			} else {
-				log.debug "found ${d.displayName} with id $dni already exists"
+				it.dni == selectedSwitch.value.mac || it.device.getDataValue("mac") == selectedSwitch.value.mac
 			}
 		}
+
+		if (!d) {
+			log.debug "Creating WeMo Switch with dni: ${selectedSwitch.value.mac}"
+			d = addChildDevice("smartthings", "Wemo Switch", selectedSwitch.value.mac, selectedSwitch?.value.hub, [
+				"label": selectedSwitch?.value?.name ?: "Wemo Switch",
+				"data": [
+					"mac": selectedSwitch.value.mac,
+					"ip": selectedSwitch.value.ip,
+					"port": selectedSwitch.value.port
+				]
+			])
+			def ipvalue = convertHexToIP(selectedSwitch.value.ip)
+			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+			log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
+		} else {
+			log.debug "found ${d.displayName} with id $dni already exists"
+		}
 	}
 }
 
@@ -264,25 +265,26 @@ def addMotions() {
 		def d
 		if (selectedMotion) {
 			d = getChildDevices()?.find {
-				it.deviceNetworkId == selectedMotion.value.mac || it.device.getDataValue("mac") == selectedMotion.value.mac
-			}
-			if (!d) {
-				log.debug "Creating WeMo Motion with dni: ${selectedMotion.value.mac}"
-				d = addChildDevice("smartthings", "Wemo Motion", selectedMotion.value.mac, selectedMotion?.value.hub, [
-					"label": selectedMotion?.value?.name ?: "Wemo Motion",
-					"data": [
-						"mac": selectedMotion.value.mac,
-						"ip": selectedMotion.value.ip,
-						"port": selectedMotion.value.port
-					]
-				])
-				def ipvalue = convertHexToIP(selectedMotion.value.ip)
-				d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
-				log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
-			} else {
-				log.debug "found ${d.displayName} with id $dni already exists"
+				it.dni == selectedMotion.value.mac || it.device.getDataValue("mac") == selectedMotion.value.mac
 			}
 		}
+
+		if (!d) {
+			log.debug "Creating WeMo Motion with dni: ${selectedMotion.value.mac}"
+			d = addChildDevice("smartthings", "Wemo Motion", selectedMotion.value.mac, selectedMotion?.value.hub, [
+				"label": selectedMotion?.value?.name ?: "Wemo Motion",
+				"data": [
+					"mac": selectedMotion.value.mac,
+					"ip": selectedMotion.value.ip,
+					"port": selectedMotion.value.port
+				]
+			])
+			def ipvalue = convertHexToIP(selectedMotion.value.ip)
+			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+			log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
+		} else {
+			log.debug "found ${d.displayName} with id $dni already exists"
+		}
 	}
 }
 
@@ -294,25 +296,26 @@ def addLightSwitches() {
 		def d
 		if (selectedLightSwitch) {
 			d = getChildDevices()?.find {
-				it.deviceNetworkId == selectedLightSwitch.value.mac || it.device.getDataValue("mac") == selectedLightSwitch.value.mac
-			}
-			if (!d) {
-				log.debug "Creating WeMo Light Switch with dni: ${selectedLightSwitch.value.mac}"
-				d = addChildDevice("smartthings", "Wemo Light Switch", selectedLightSwitch.value.mac, selectedLightSwitch?.value.hub, [
-					"label": selectedLightSwitch?.value?.name ?: "Wemo Light Switch",
-					"data": [
-						"mac": selectedLightSwitch.value.mac,
-						"ip": selectedLightSwitch.value.ip,
-						"port": selectedLightSwitch.value.port
-					]
-				])
-				def ipvalue = convertHexToIP(selectedLightSwitch.value.ip)
-				d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
-				log.debug "created ${d.displayName} with id $dni"
-			} else {
-				log.debug "found ${d.displayName} with id $dni already exists"
+				it.dni == selectedLightSwitch.value.mac || it.device.getDataValue("mac") == selectedLightSwitch.value.mac
 			}
 		}
+
+		if (!d) {
+			log.debug "Creating WeMo Light Switch with dni: ${selectedLightSwitch.value.mac}"
+			d = addChildDevice("smartthings", "Wemo Light Switch", selectedLightSwitch.value.mac, selectedLightSwitch?.value.hub, [
+				"label": selectedLightSwitch?.value?.name ?: "Wemo Light Switch",
+				"data": [
+					"mac": selectedLightSwitch.value.mac,
+					"ip": selectedLightSwitch.value.ip,
+					"port": selectedLightSwitch.value.port
+				]
+			])
+			def ipvalue = convertHexToIP(selectedLightSwitch.value.ip)
+			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+			log.debug "created ${d.displayName} with id $dni"
+		} else {
+			log.debug "found ${d.displayName} with id $dni already exists"
+		}
 	}
 }
 

smartapps/tslagle13/vacation-lighting-director.src/vacation-lighting-director.groovy

@@ -1,17 +1,11 @@
 /**
  *  Vacation Lighting Director
  * 
- * Version  2.5 - Moved scheduling over to Cron and added time as a trigger. 
- *				  Cleaned up formatting and some typos.
- *                Updated license.
- *                Made people option optional
- * 				  Added sttement to unschedule on mode change if people option is not selected
- *
- * Version  2.4 - Added information paragraphs
+ *  Version  2.4 - Added information paragraphs
  * 
  *  Source code can be found here: https://github.com/tslagle13/SmartThings/blob/master/smartapps/tslagle13/vacation-lighting-director.groovy
  *
- *  Copyright 2016 Tim Slagle
+ *  Copyright 2015 Tim Slagle
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -40,7 +34,6 @@ preferences {
     page name:"pageSetup"
     page name:"Setup"
     page name:"Settings"
-    page name: "timeIntervalInput"
 
 }
 
@@ -58,7 +51,8 @@ def pageSetup() {
 	return dynamicPage(pageProperties) {
     	section(""){
         	paragraph "This app can be used to make your home seem occupied anytime you are away from your home. " +
-			"Please use each of the the sections below to setup the different preferences to your liking. " 
+			"Please use each othe the sections below to setup the different preferences to your liking. " +
+			"I recommend this app be used with at least two away modes.  An example would be 'Away Day' 'and Away Night'. " 
         }
         section("Setup Menu") {
             href "Setup", title: "Setup", description: "", state:greyedOut()
@@ -76,7 +70,7 @@ def Setup() {
     def newMode = [
         name:       	"newMode",
         type:       	"mode",
-        title:      	"Modes",
+        title:      	"Which?",
         multiple:   	true,
         required:   	true
     ]
@@ -102,6 +96,14 @@ def Setup() {
         required:	true,
     ]
     
+    def people = [
+        name:       "people",
+        type:       "capability.presenceSensor",
+        title:      "If these people are home do not change light status",
+        required:	true,
+        multiple:	true
+    ]
+    
     def pageName = "Setup"
     
     def pageProperties = [
@@ -114,11 +116,10 @@ def Setup() {
 
 		section(""){            
                     paragraph "In this section you need to setup the deatils of how you want your lighting to be affected while " +
-                    "you are away.  All of these settings are required in order for the simulator to run correctly."
+                    paragraph "you are away.  All of these settings are required in order for the simulator to run correctly."
         }
-        section("Simulator Triggers") {
-                    input newMode  
-                    href "timeIntervalInput", title: "Times", description: timeIntervalLabel(), refreshAfterSelection:true
+        section("Which mode change triggers the simulator? (This app will only run in selected mode(s))") {
+                    input newMode           
         }
         section("Light switches to turn on/off") {
                     input switches           
@@ -129,6 +130,9 @@ def Setup() {
         section("Number of active lights at any given time") {
                     input number_of_active_lights           
         }    
+        section("People") {
+                    input people            
+        }
     }
     
 }
@@ -158,58 +162,30 @@ def Settings() {
         title:      "Settings",
         nextPage:   "pageSetup"
     ]
-    
-    def people = [
-        name:       "people",
-        type:       "capability.presenceSensor",
-        title:      "If these people are home do not change light status",
-        required:	false,
-        multiple:	true
-    ]
 
     return dynamicPage(pageProperties) {
 
 		section(""){              
                     paragraph "In this section you can restrict how your simulator runs.  For instance you can restrict on which days it will run " +
-                    "as well as a delay for the simulator to start after it is in the correct mode.  Delaying the simulator helps with false starts based on a incorrect mode change."
+                    paragraph "as well as a delay for the simulator to start after it is in the correct mode.  Delaying the simulator helps with false starts based on a incorrect mode change."
         }
         section("Delay to start simulator") {
                     input falseAlarmThreshold
         }
-        section("People") {
-        			paragraph "Not using this setting may cause some lights to remain on when you arrive home"
-                    input people            
-        }
         section("More options") {
+                    href "timeIntervalInput", title: "Only during a certain time", description: getTimeLabel(starting, ending), state: greyedOutTime(starting, ending), refreshAfterSelection:true
                     input days
         } 
     }   
 }
 
-def timeIntervalInput() {
-	dynamicPage(name: "timeIntervalInput") {
+page(name: "timeIntervalInput", title: "Only during a certain time", refreshAfterSelection:true) {
 		section {
-			input "startTimeType", "enum", title: "Starting at", options: [["time": "A specific time"], ["sunrise": "Sunrise"], ["sunset": "Sunset"]], defaultValue: "time", submitOnChange: true
-			if (startTimeType in ["sunrise","sunset"]) {
-				input "startTimeOffset", "number", title: "Offset in minutes (+/-)", range: "*..*", required: false
-			}
-			else {
-				input "starting", "time", title: "Start time", required: false
-			}
+			input "starting", "time", title: "Starting", required: false 
+			input "ending", "time", title: "Ending", required: false 
 		}
-		section {
-			input "endTimeType", "enum", title: "Ending at", options: [["time": "A specific time"], ["sunrise": "Sunrise"], ["sunset": "Sunset"]], defaultValue: "time", submitOnChange: true
-			if (endTimeType in ["sunrise","sunset"]) {
-				input "endTimeOffset", "number", title: "Offset in minutes (+/-)", range: "*..*", required: false
-			}
-			else {
-				input "ending", "time", title: "End time", required: false
-			}
-		}
-	}
 }
 
-
 def installed() {
 initialize()
 }
@@ -225,13 +201,10 @@ def initialize(){
 	if (newMode != null) {
 		subscribe(location, modeChangeHandler)
     }
-    if (starting != null) {
-    	schedule(starting, modeChangeHandler)
-    }
-    log.debug "Installed with settings: ${settings}"
 }
 
 def modeChangeHandler(evt) {
+	log.debug "Mode change to: ${evt.value}"
 		def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 2 * 60  
     	runIn(delay, scheduleCheck)
 }
@@ -239,54 +212,48 @@ def modeChangeHandler(evt) {
 
 //Main logic to pick a random set of lights from the large set of lights to turn on and then turn the rest off
 def scheduleCheck(evt) {
-    if(allOk){
-        log.debug("Running")
-        // turn off all the switches
-        switches.off()
-        
-        // grab a random switch
-        def random = new Random()
-        def inactive_switches = switches
-        for (int i = 0 ; i < number_of_active_lights ; i++) {
-            // if there are no inactive switches to turn on then let's break
-            if (inactive_switches.size() == 0){
-                break
-            }
-            
-            // grab a random switch and turn it on
-            def random_int = random.nextInt(inactive_switches.size())
-            inactive_switches[random_int].on()
-            
-            // then remove that switch from the pool off switches that can be turned on
-            inactive_switches.remove(random_int)
-        }
-        
-        // re-run again when the frequency demands it
-        schedule("0 0/${frequency_minutes} * 1/1 * ? *", scheduleCheck)
+if(allOk){
+log.debug("Running")
+  // turn off all the switches
+  switches.off()
+
+  // grab a random switch
+  def random = new Random()
+  def inactive_switches = switches
+  for (int i = 0 ; i < number_of_active_lights ; i++) {
+    // if there are no inactive switches to turn on then let's break
+    if (inactive_switches.size() == 0){
+      break
     }
-    //Check to see if mode is ok but not time/day.  If mode is still ok, check again after frequency period.
-    else if (modeOk) {
-        log.debug("mode OK.  Running again")
-        switches.off()
-    }
-    //if none is ok turn off frequency check and turn off lights.
-    else {
-    	if(people){
-        	//don't turn off lights if anyone is home
-        	if(someoneIsHome()){
-        	    log.debug("Stopping Check for Light")
-        	    unschedule()
-        	}
-        	else{
-        	    log.debug("Stopping Check for Light and turning off all lights")
-        	    switches.off()
-        	    unschedule()
-        	}
+
+    // grab a random switch and turn it on
+    def random_int = random.nextInt(inactive_switches.size())
+    inactive_switches[random_int].on()
+
+    // then remove that switch from the pool off switches that can be turned on
+    inactive_switches.remove(random_int)
+  }
+
+  // re-run again when the frequency demands it
+  runIn(frequency_minutes * 60, scheduleCheck)
+}
+//Check to see if mode is ok but not time/day.  If mode is still ok, check again after frequency period.
+else if (modeOk) {
+	log.debug("mode OK.  Running again")
+	runIn(frequency_minutes * 60, scheduleCheck)
+    switches.off()
+}
+//if none is ok turn off frequency check and turn off lights.
+else if(people){
+    //don't turn off lights if anyone is home
+		if(someoneIsHome()){
+		log.debug("Stopping Check for Light")
     	}
-        else if (!modeOk) {
-        	unschedule()
-        }
+        else{
+    log.debug("Stopping Check for Light and turning off all lights")
+	switches.off()
     }
+}
 }      
 
 
@@ -319,6 +286,26 @@ private getDaysOk() {
 	result
 }
 
+private getTimeOk() {
+	def result = true
+	if (starting && ending) {
+		def currTime = now()
+		def start = timeToday(starting).time
+		def stop = timeToday(ending).time
+		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
+	}
+    
+    else if (starting){
+    	result = currTime >= start
+    }
+    else if (ending){
+    	result = currTime <= stop
+    }
+    
+	log.trace "timeOk = $result"
+	result
+}
+
 private getHomeIsEmpty() {
   def result = true
 
@@ -343,59 +330,25 @@ private getSomeoneIsHome() {
   return result
 }
 
-private getTimeOk() {
-	def result = true
-	def start = timeWindowStart()
-	def stop = timeWindowStop()
-	if (start && stop && location.timeZone) {
-		result = timeOfDayIsBetween(start, stop, new Date(), location.timeZone)
-	}
-	log.trace "timeOk = $result"
-	result
-}
-
-private timeWindowStart() {
-	def result = null
-	if (startTimeType == "sunrise") {
-		result = location.currentState("sunriseTime")?.dateValue
-		if (result && startTimeOffset) {
-			result = new Date(result.time + Math.round(startTimeOffset * 60000))
-		}
-	}
-	else if (startTimeType == "sunset") {
-		result = location.currentState("sunsetTime")?.dateValue
-		if (result && startTimeOffset) {
-			result = new Date(result.time + Math.round(startTimeOffset * 60000))
-		}
-	}
-	else if (starting && location.timeZone) {
-		result = timeToday(starting, location.timeZone)
-	}
-	log.trace "timeWindowStart = ${result}"
-	result
-}
-
-private timeWindowStop() {
-	def result = null
-	if (endTimeType == "sunrise") {
-		result = location.currentState("sunriseTime")?.dateValue
-		if (result && endTimeOffset) {
-			result = new Date(result.time + Math.round(endTimeOffset * 60000))
-		}
-	}
-	else if (endTimeType == "sunset") {
-		result = location.currentState("sunsetTime")?.dateValue
-		if (result && endTimeOffset) {
-			result = new Date(result.time + Math.round(endTimeOffset * 60000))
-		}
-	}
-	else if (ending && location.timeZone) {
-		result = timeToday(ending, location.timeZone)
-	}
-	log.trace "timeWindowStop = ${result}"
-	result
+
+//gets the label for time restriction. Label phrasing changes depending on if there is both start and stop times or just one start/stop time.
+def getTimeLabel(starting, ending){
+
+	def timeLabel = "Tap to set"
+	
+    if(starting && ending){
+    	timeLabel = "Between" + " " + hhmm(starting) + " "  + "and" + " " +  hhmm(ending)
+    }
+    else if (starting) {
+		timeLabel = "Start at" + " " + hhmm(starting)
+    }
+    else if(ending){
+    timeLabel = "End at" + hhmm(ending)
+    }
+	timeLabel
 }
 
+//fomrats time to readable format for time label
 private hhmm(time, fmt = "h:mm a")
 {
 	def t = timeToday(time, location.timeZone)
@@ -404,41 +357,6 @@ private hhmm(time, fmt = "h:mm a")
 	f.format(t)
 }
 
-private timeIntervalLabel() {
-	def start = ""
-	switch (startTimeType) {
-		case "time":
-			if (ending) {
-            	start += hhmm(starting)
-            }
-			break
-		case "sunrise":
-		case "sunset":
-        	start += startTimeType[0].toUpperCase() + startTimeType[1..-1]
-			if (startTimeOffset) {
-				start += startTimeOffset > 0 ? "+${startTimeOffset} min" : "${startTimeOffset} min"
-			}
-			break
-	}
-
-    def finish = ""
-	switch (endTimeType) {
-		case "time":
-			if (ending) {
-            	finish += hhmm(ending)
-            }
-			break
-		case "sunrise":
-		case "sunset":
-        	finish += endTimeType[0].toUpperCase() + endTimeType[1..-1]
-			if (endTimeOffset) {
-				finish += endTimeOffset > 0 ? "+${endTimeOffset} min" : "${endTimeOffset} min"
-			}
-			break
-	}
-	start && finish ? "${start} to ${finish}" : ""
-}
-
 //sets complete/not complete for the setup section on the main dynamic page
 def greyedOut(){
 	def result = ""
@@ -451,7 +369,16 @@ def greyedOut(){
 //sets complete/not complete for the settings section on the main dynamic page
 def greyedOutSettings(){
 	def result = ""
-    if (people || days || falseAlarmThreshold ) {
+    if (starting || ending || days || falseAlarmThreshold) {
+    	result = "complete"	
+    }
+    result
+}
+
+//sets complete/not complete for time restriction section in settings
+def greyedOutTime(starting, ending){
+	def result = ""
+    if (starting || ending) {
     	result = "complete"	
     }
     result