MSA-1385: Beep presence sensor if anything happens.....

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,14 +22,12 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
 		attribute "powerSupply", "enum", ["USB Cable", "Battery"]
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
-		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A,0x5A"
 	}
 
 	simulator {
@@ -328,9 +326,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device user configured or default 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2* (timeOptionValueMap[reportInterval] ?: (2*8*60)), displayed: false)
-
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
 	def request = []
@@ -357,7 +352,7 @@ def configure() {
 									motionSensitivity == "minimum" ? 0 : 64)
 
 	//5. report every x minutes (threshold reports don't work on battery power, default 8 mins)
-	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: (8*60)) //association group 1
+	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: 8*60) //association group 1
 
 	request << zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 6*60*60)  //association group 2
 

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,9 +20,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
-
-		command "configureAfterSecure"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 	}
@@ -248,8 +245,6 @@ def configureAfterSecure() {
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
-	// allow device 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*8*60, displayed: false)
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -181,9 +180,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device 10 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*5*60, displayed: false)
-
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
 		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2).format(),

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -255,8 +255,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				result.value = Math.min(100, roundedPct)
+				result.value = Math.min(100, (int) pct * 100)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -271,8 +271,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				result.value = Math.min(100, roundedPct)
+				result.value = Math.min(100, (int) pct * 100)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -240,8 +240,7 @@ private Map getBatteryResult(rawValue) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			result.value = Math.min(100, roundedPct)
+			result.value = Math.min(100, (int) pct * 100)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 	}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -338,8 +338,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				result.value = Math.min(100, roundedPct)
+				result.value = Math.min(100, (int) pct * 100)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -234,8 +234,7 @@ def getTemperature(value) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			result.value = Math.min(100, roundedPct)
+			result.value = Math.min(100, (int) pct * 100)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -22,7 +22,6 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Health Check"
-		capability "Sensor"
         
 		command "enrollResponse"
  
@@ -230,8 +229,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		result.value = Math.min(100, roundedPct)
+		result.value = Math.min(100, (int) pct * 100)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -205,8 +205,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		result.value = Math.min(100, roundedPct)
+		result.value = Math.min(100, (int) pct * 100)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -223,8 +223,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		result.value = Math.min(100, roundedPct)
+		result.value = Math.min(100, (int) pct * 100)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -28,6 +28,7 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -35,7 +36,6 @@ metadata {
 		// status messages
 		status "open":  "command: 2001, payload: FF"
 		status "closed": "command: 2001, payload: 00"
-		status "wake up": "command: 8407, payload: "
 	}
 
 	// UI tile definitions
@@ -83,12 +83,12 @@ def updated() {
 		cmds = [
 			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
 			"delay 1200",
-			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+			zwave.wakeUpV1.wakeUpNoMoreInformation()
 		]
 	} else if (!state.lastbat) {
 		cmds = []
 	} else {
-		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
+		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation()]
 	}
 	response(cmds)
 }
@@ -175,7 +175,7 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
 		cmds << command(zwave.batteryV1.batteryGet())
 	} else {
-		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation()
 	}
 	[event, response(cmds)]
 }

smartapps/smartthings/beep-when.src/beep-when.groovy

@@ -0,0 +1,88 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Beep When
+ *
+ *  Author: SmartThings
+ *  Date: 2016-06-05
+ */
+definition(
+		name: "Beep When",
+		namespace: "smartthings",
+		author: "SmartThings",
+		description: "Beep Presence sensor when anything happens in your home.",
+		category: "Convenience",
+		iconUrl: "https://s3.amazonaws.com/smartapp-icons/Meta/window_contact.png",
+		iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Meta/window_contact@2x.png"
+)
+
+preferences {
+	section("Choose one or more, when..."){
+		input "button", "capability.button", title: "Button Pushed", required: false, multiple: true //tw
+		input "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true
+		input "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
+		input "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
+		input "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
+		input "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true
+		input "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true
+		input "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true
+		input "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true
+		input "smoke", "capability.smokeDetector", title: "Smoke Detected", required: false, multiple: true
+		input "water", "capability.waterSensor", title: "Water Sensor Wet", required: false, multiple: true
+	}
+	section("Beep the presence sensor..") {
+		input "presence", "capability.presenceSensor", title: "Which sensor beep?"
+	}
+
+	section("Minimum time between beeps (optional, defaults to every beep)") {
+		input "frequency", "decimal", title: "Minutes", required: false
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	subscribeToEvents()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	subscribeToEvents()
+}
+
+def subscribeToEvents() {
+	subscribe(button, "button.pushed", eventHandler) //tw
+	subscribe(contact, "contact.open", eventHandler)
+	subscribe(contactClosed, "contact.closed", eventHandler)
+	subscribe(acceleration, "acceleration.active", eventHandler)
+	subscribe(motion, "motion.active", eventHandler)
+	subscribe(mySwitch, "switch.on", eventHandler)
+	subscribe(mySwitchOff, "switch.off", eventHandler)
+	subscribe(arrivalPresence, "presence.present", eventHandler)
+	subscribe(departurePresence, "presence.not present", eventHandler)
+	subscribe(smoke, "smoke.detected", eventHandler)
+	subscribe(smoke, "smoke.tested", eventHandler)
+	subscribe(smoke, "carbonMonoxide.detected", eventHandler)
+	subscribe(water, "water.wet", eventHandler)
+}
+
+def eventHandler(evt) {
+	log.debug "Notify got evt ${evt}"
+	if (frequency) {
+		def lastTime = state[evt.deviceId]
+		if (lastTime == null || now() - lastTime >= frequency * 60000) {
+			 presence.beep()		}
+	}
+	else {
+		 presence.beep()
+	}
+}

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -237,7 +237,7 @@ def completionPage() {
 		}
 
 		section("Notifications") {
-			input("recipients", "contact", title: "Send notifications to", required: false) {
+			input("recipients", "contact", title: "Send notifications to") {
 				input(name: "completionPhoneNumber", type: "phone", title: "Text This Number", description: "Phone number", required: false)
 				input(name: "completionPush", type: "bool", title: "Send A Push Notification", description: "Phone number", required: false)
 			}
@@ -720,7 +720,7 @@ def completionPercentage() {
 
 	def now = new Date().getTime()
 	def timeElapsed = now - atomicState.start
-	def totalRunTime = totalRunTimeMillis() ?: 1
+	def totalRunTime = totalRunTimeMillis()
 	def percentComplete = timeElapsed / totalRunTime * 100
 	log.debug "percentComplete: ${percentComplete}"
 

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -689,7 +689,7 @@ def parse(childDevice, description) {
             	log.warn "Parsing Body failed - trying again..."
                 poll()
             }
-            if (body instanceof java.util.Map) {
+            if (body instanceof java.util.HashMap) {
             	//poll response
                 def bulbs = getChildDevices()
                 for (bulb in body) {

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -688,7 +688,7 @@ def validateCommand(device, command) {
 	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
 	def currentDeviceCapability = getCapabilityName(device)
 	if (currentDeviceCapability != "" && capabilityCommands[currentDeviceCapability]) {
-    return (command in capabilityCommands[currentDeviceCapability] || (currentDeviceCapability == "Switch" && command == "setLevel" && device.hasCommand("setLevel"))) ? true : false
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
 	} else {
 		// Handling other device types here, which don't accept commands
 		httpError(400, "Bad request.")
@@ -823,8 +823,8 @@ def deviceHandler(evt) {
 }
 
 def sendToHarmony(evt, String callbackUrl) {
-  def callback = new URI(callbackUrl)
-  if (callback.port != -1) {
+	def callback = new URI(callbackUrl)
+  if(isIP(callback.host)){
   	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
   	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
   	sendHubCommand(new physicalgraph.device.HubAction(
@@ -852,6 +852,25 @@ def sendToHarmony(evt, String callbackUrl) {
   }
 }
 
+public static boolean isIP(String str) {
+    try {
+         String[] parts = str.split("\\.");
+         if (parts.length != 4) return false;
+         for (int i = 0; i < 4; ++i) {
+             int p
+             try {
+               p = Integer.parseInt(parts[i]);
+             } catch (Exception e) {
+               return false;
+             }
+             if (p > 255 || p < 0) return false;
+         }
+         return true;
+    } catch (Exception e) {
+        return false;
+    }
+}
+
 def listHubs() {
 	location.hubs?.findAll { it.type.toString() == "PHYSICAL" }?.collect { hubItem(it) }
 }