MSA-1393: Home Remote for PC

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -29,7 +29,6 @@ metadata {
 		attribute "powerSupply", "enum", ["USB Cable", "Battery"]
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
-		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A,0x5A"
 	}
 
 	simulator {
@@ -329,7 +328,7 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 
 def configure() {
 	// allow device user configured or default 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2* (timeOptionValueMap[reportInterval] ?: (2*8*60)), displayed: false)
+	sendEvent(name: "checkInterval", value: 2* timeOptionValueMap[reportInterval] ?: 2*8*60, displayed: false)
 
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
@@ -357,7 +356,7 @@ def configure() {
 									motionSensitivity == "minimum" ? 0 : 64)
 
 	//5. report every x minutes (threshold reports don't work on battery power, default 8 mins)
-	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: (8*60)) //association group 1
+	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: 8*60) //association group 1
 
 	request << zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 6*60*60)  //association group 2
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -255,8 +255,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				result.value = Math.min(100, roundedPct)
+				result.value = Math.min(100, (int) pct * 100)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -271,8 +271,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				result.value = Math.min(100, roundedPct)
+				result.value = Math.min(100, (int) pct * 100)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -24,7 +24,7 @@ metadata {
         capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Sensor"
-
+        
         command "enrollResponse"
 
 	}
@@ -73,7 +73,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -87,10 +87,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
 	    map = parseIasMessage(description)
     }
-
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
+    
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -128,7 +128,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -141,7 +141,7 @@ private Map parseReportAttributeMessage(String description) {
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,11 +153,11 @@ private Map parseReportAttributeMessage(String description) {
     else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
     	def value = descMap.value.endsWith("01") ? "active" : "inactive"
     	resultMap = getMotionResult(value)
-    }
-
+    } 
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -170,7 +170,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-
+    
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -240,8 +240,7 @@ private Map getBatteryResult(rawValue) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			result.value = Math.min(100, roundedPct)
+			result.value = Math.min(100, (int) pct * 100)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 	}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -338,8 +338,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				result.value = Math.min(100, roundedPct)
+				result.value = Math.min(100, (int) pct * 100)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -234,8 +234,7 @@ def getTemperature(value) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			result.value = Math.min(100, roundedPct)
+			result.value = Math.min(100, (int) pct * 100)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -13,7 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
+ 
 metadata {
 	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Battery"
@@ -22,25 +22,24 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Health Check"
-		capability "Sensor"
-
+        
 		command "enrollResponse"
-
-
+ 
+ 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
 	}
-
+ 
 	simulator {
-
+ 
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
-
+ 
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
@@ -73,10 +72,10 @@ metadata {
 		details(["contact","temperature","battery","refresh"])
 	}
 }
-
+ 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -90,10 +89,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
-
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
+    
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -101,7 +100,7 @@ def parse(String description) {
     }
     return result
 }
-
+ 
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -127,7 +126,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -137,14 +136,14 @@ private boolean shouldProcessMessage(cluster) {
 private int getHumidity(value) {
     return Math.round(Double.parseDouble(value))
 }
-
+ 
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,10 +152,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -169,7 +168,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-
+    
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -202,7 +201,7 @@ private Map parseIasMessage(String description) {
     }
     return resultMap
 }
-
+ 
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -215,11 +214,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-
+    
     def result = [
     	name: 'battery'
     ]
-
+    
 	def volts = rawValue / 10
 	def descriptionText
     if (rawValue == 0 || rawValue == 255) {}
@@ -230,8 +229,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		result.value = Math.min(100, roundedPct)
+		result.value = Math.min(100, (int) pct * 100)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -277,7 +275,7 @@ def refresh() {
 
 def configure() {
 	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-
+	
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -205,8 +205,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		result.value = Math.min(100, roundedPct)
+		result.value = Math.min(100, (int) pct * 100)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -13,7 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
+ 
 metadata {
 	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
@@ -21,28 +21,28 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-
+        
 		command "enrollResponse"
-
-
+ 
+ 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Visonic", model: "MCT-340 SMA"
 	}
-
+ 
 	simulator {
-
+ 
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
-
+ 
 	tiles {
     	standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
 			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
-
+    	
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
@@ -58,23 +58,23 @@ metadata {
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-
+        
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-
+        
 		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
 			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
 		}
-
+ 
 		main (["contact", "temperature"])
 		details(["contact","temperature","battery","refresh","configure"])
 	}
 }
-
+ 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -88,10 +88,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
-
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
+    
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -99,7 +99,7 @@ def parse(String description) {
     }
     return result
 }
-
+ 
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -125,20 +125,20 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
-
+ 
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -147,10 +147,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -163,7 +163,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-
+    
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -196,7 +196,7 @@ private Map parseIasMessage(String description) {
     }
     return resultMap
 }
-
+ 
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -209,11 +209,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-
+    
     def result = [
     	name: 'battery'
     ]
-
+    
 	def volts = rawValue / 10
 	def descriptionText
 	if (volts > 3.5) {
@@ -223,8 +223,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		result.value = Math.min(100, roundedPct)
+		result.value = Math.min(100, (int) pct * 100)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -262,7 +261,7 @@ def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
 	[
-
+    
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
@@ -275,24 +274,24 @@ def configure() {
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
     	"delay 1000",
-
+        
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
+        
         "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
+        
         "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-
+        
+        
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-
+        
+        
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
 		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
-
+        
         "delay 500"
 	]
     return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
@@ -300,11 +299,11 @@ def configure() {
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [
-
+    [	
+    	
 	"raw 0x500 {01 23 00 00 00}", "delay 200",
     "send 0x${device.deviceNetworkId} 1 1"
-
+        
     ]
 }
 private hex(value) {

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -28,6 +28,7 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -35,7 +36,6 @@ metadata {
 		// status messages
 		status "open":  "command: 2001, payload: FF"
 		status "closed": "command: 2001, payload: 00"
-		status "wake up": "command: 8407, payload: "
 	}
 
 	// UI tile definitions
@@ -83,12 +83,12 @@ def updated() {
 		cmds = [
 			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
 			"delay 1200",
-			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+			zwave.wakeUpV1.wakeUpNoMoreInformation()
 		]
 	} else if (!state.lastbat) {
 		cmds = []
 	} else {
-		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
+		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation()]
 	}
 	response(cmds)
 }
@@ -175,7 +175,7 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
 		cmds << command(zwave.batteryV1.batteryGet())
 	} else {
-		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation()
 	}
 	[event, response(cmds)]
 }

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -237,7 +237,7 @@ def completionPage() {
 		}
 
 		section("Notifications") {
-			input("recipients", "contact", title: "Send notifications to", required: false) {
+			input("recipients", "contact", title: "Send notifications to") {
 				input(name: "completionPhoneNumber", type: "phone", title: "Text This Number", description: "Phone number", required: false)
 				input(name: "completionPush", type: "bool", title: "Send A Push Notification", description: "Phone number", required: false)
 			}
@@ -720,7 +720,7 @@ def completionPercentage() {
 
 	def now = new Date().getTime()
 	def timeElapsed = now - atomicState.start
-	def totalRunTime = totalRunTimeMillis() ?: 1
+	def totalRunTime = totalRunTimeMillis()
 	def percentComplete = timeElapsed / totalRunTime * 100
 	log.debug "percentComplete: ${percentComplete}"
 

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -689,7 +689,7 @@ def parse(childDevice, description) {
             	log.warn "Parsing Body failed - trying again..."
                 poll()
             }
-            if (body instanceof java.util.Map) {
+            if (body instanceof java.util.HashMap) {
             	//poll response
                 def bulbs = getChildDevices()
                 for (bulb in body) {
@@ -830,22 +830,22 @@ def setColorTemperature(childDevice, huesettings) {
 
 def setColor(childDevice, huesettings) {
     log.debug "Executing 'setColor($huesettings)'"
-
+    
     def value = [:]
     def hue = null
     def sat = null
     def xy = null
-
+    
     if (huesettings.hex != null) {
         value.xy = getHextoXY(huesettings.hex)
     } else {
         if (huesettings.hue != null)
             value.hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
-        if (huesettings.saturation != null)
+        if (huesettings.saturation != null)   
             value.sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
     }
-
-    // Default behavior is to turn light on
+    
+    // Default behavior is to turn light on 
     value.on = true
 
     if (huesettings.level != null) {
@@ -853,7 +853,7 @@ def setColor(childDevice, huesettings) {
             value.on = false
         else if (huesettings.level == 1)
             value.bri = 1
-        else
+        else 
             value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
     }
     value.alert = huesettings.alert ? huesettings.alert : "none"

smartapps/thehomeremote-homeremote/home-remote.src/home-remote.groovy

@@ -0,0 +1,798 @@
+/**
+ *  Home Remote
+ *
+ *  Copyright 2015 The Home Remote
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Home Remote",
+    namespace: "thehomeremote.homeremote",
+    author: "The Home Remote",
+    description: "Web service that enables communication between the Home Remote app and a SmartThings hub.",
+    category: "My Apps",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    oauth: [displayName: "The Home Remote", displayLink: "http://thehomeremote.com/"])
+
+
+preferences {
+    section() {
+	input "accelerationSensors", "capability.accelerationSensor",title: "Acceleration Sensors", multiple: true, required: false
+	input "alarms", "capability.alarm",title: "Alarms", multiple: true, required: false
+	input "batteries", "capability.battery",title: "Batteries", multiple: true, required: false
+	input "beacons", "capability.beacon",title: "Beacons", multiple: true, required: false
+	input "buttonGroup", "capability.button",title: "Buttons", multiple: true, required: false
+	input "carbonMonoxideDetectors", "capability.carbonMonoxideDetector",title: "CO Detectors", multiple: true, required: false
+	input "colorControls", "capability.colorControl",title: "Color Lights", multiple: true, required: false
+	input "contactSensors", "capability.contactSensor",title: "Contact Sensors", multiple: true, required: false
+	input "doorControls", "capability.doorControl",title: "Door Controllers", multiple: true, required: false
+	input "energyMeters", "capability.energyMeter",title: "Energy Meters", multiple: true, required: false
+	input "illuminanceMeasurements", "capability.illuminanceMeasurement",title: "Illuminance Sensors", multiple: true, required: false
+	input "imageCaptures", "capability.imageCapture",title: "Cameras", multiple: true, required: false
+	input "locks", "capability.lock",title: "Locks", multiple: true, required: false
+	input "mediaControllers", "capability.mediaController",title: "Media Controllers", multiple: true, required: false
+	input "momentaries", "capability.momentary",title: "Momentary Buttons", multiple: true, required: false
+	input "motionSensors", "capability.motionSensor",title: "Motion Sensors", multiple: true, required: false
+	input "musicPlayers", "capability.musicPlayer",title: "Music Players", multiple: true, required: false
+	input "powerMeters", "capability.powerMeter",title: "Power Meters", multiple: true, required: false
+	input "presenceSensors", "capability.presenceSensor",title: "Presence Sensors", multiple: true, required: false
+	input "relativeHumidityMeasurements", "capability.relativeHumidityMeasurement",title: "Humidity Sensors", multiple: true, required: false
+	input "relaySwitches", "capability.relaySwitch",title: "Relays", multiple: true, required: false
+	input "signalStrengths", "capability.signalStrength",title: "Signal Strengths", multiple: true, required: false
+	input "sleepSensors", "capability.sleepSensor",title: "Sleep Sensors", multiple: true, required: false
+	input "smokeDetectors", "capability.smokeDetector",title: "Smoke Detectors", multiple: true, required: false
+	input "speechSyntheses", "capability.speechSynthesis",title: "Speech Syntheses", multiple: true, required: false
+	input "stepSensors", "capability.stepSensor",title: "Step Sensors", multiple: true, required: false
+	input "switches", "capability.switch",title: "Switches", multiple: true, required: false
+	input "switchLevels", "capability.switchLevel",title: "Dimmers", multiple: true, required: false
+	input "temperatureMeasurements", "capability.temperatureMeasurement",title: "Temperature Sensors", multiple: true, required: false
+	input "thermostats", "capability.thermostat",title: "Thermostats", multiple: true, required: false
+	input "threeAxes", "capability.threeAxis",title: "Three axis Sensors", multiple: true, required: false
+	input "tones", "capability.tone",title: "Tones", multiple: true, required: false
+	input "touchSensors", "capability.touchSensor",title: "Touch Sensors", multiple: true, required: false
+	input "valves", "capability.valve",title: "Valves", multiple: true, required: false
+	input "waterSensors", "capability.waterSensor",title: "Water Sensors", multiple: true, required: false
+    }
+}
+
+mappings {
+  path("/GetCurrentValues") {
+    action: [
+      GET: "getCurrentValues"
+    ]
+  }
+  path("/GetCurrentValuesWithDisplayName") {
+    action: [
+      GET: "getCurrentValuesWithDisplayName"
+    ]
+  }
+  path("/GetRoutines") {
+    action: [
+      GET: "getRoutines"
+    ]
+  }
+  path("/ExecuteCommand") {
+    action: [
+      PUT: "executeCommand"
+    ]
+  }
+  path("/ExecuteRoutine") {
+    action: [
+      PUT: "executeRoutine"
+    ]
+  }
+}
+
+def getCurrentValues() {
+    def resp = []    
+        
+ 	accelerationSensors.each {
+      resp << [id: it.id, capability: "AccelerationSensor", attribute: "acceleration", value: it.currentValue("acceleration")]
+    }
+
+	alarms.each {
+      resp << [id: it.id, capability: "Alarm", attribute: "alarm", value: it.currentValue("alarm")]
+    }
+
+	batteries.each {
+      resp << [id: it.id, capability: "Battery", attribute: "battery", value: it.currentValue("battery")]
+    }
+
+	beacons.each {
+      resp << [id: it.id, capability: "Beacon", attribute: "presence", value: it.currentValue("presence")]
+    }
+
+	buttonGroup.each {
+      resp << [id: it.id, capability: "Button", attribute: "button", value: it.currentValue("button")]
+    }
+
+	carbonMonoxideDetectors.each {
+      resp << [id: it.id, capability: "CarbonMonoxideDetector", attribute: "carbonMonoxide", value: it.currentValue("carbonMonoxide")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, capability: "ColorControl", attribute: "hue", value: it.currentValue("hue")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, capability: "ColorControl", attribute: "saturation", value: it.currentValue("saturation")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, capability: "ColorControl", attribute: "color", value: it.currentValue("color")]
+    }
+
+	contactSensors.each {
+      resp << [id: it.id, capability: "ContactSensor", attribute: "contact", value: it.currentValue("contact")]
+    }
+
+	doorControls.each {
+      resp << [id: it.id, capability: "DoorControl", attribute: "door", value: it.currentValue("door")]
+    }
+
+	energyMeters.each {
+      resp << [id: it.id, capability: "EnergyMeter", attribute: "energy", value: it.currentValue("energy")]
+    }
+
+	illuminanceMeasurements.each {
+      resp << [id: it.id, capability: "IlluminanceMeasurement", attribute: "illuminance", value: it.currentValue("illuminance")]
+    }
+
+	imageCaptures.each {
+      resp << [id: it.id, capability: "ImageCapture", attribute: "image", value: it.currentValue("image")]
+    }
+
+	locks.each {
+      resp << [id: it.id, capability: "Lock", attribute: "lock", value: it.currentValue("lock")]
+    }
+
+	mediaControllers.each {
+      resp << [id: it.id, capability: "MediaController", attribute: "activities", value: it.currentValue("activities")]
+    }
+
+	mediaControllers.each {
+      resp << [id: it.id, capability: "MediaController", attribute: "currentActivity", value: it.currentValue("currentActivity")]
+    }
+
+	motionSensors.each {
+      resp << [id: it.id, capability: "MotionSensor", attribute: "motion", value: it.currentValue("motion")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, capability: "MusicPlayer", attribute: "status", value: it.currentValue("status")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, capability: "MusicPlayer", attribute: "level", value: it.currentValue("level")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, capability: "MusicPlayer", attribute: "trackDescription", value: it.currentValue("trackDescription")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, capability: "MusicPlayer", attribute: "trackData", value: it.currentValue("trackData")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, capability: "MusicPlayer", attribute: "mute", value: it.currentValue("mute")]
+    }
+
+	powerMeters.each {
+      resp << [id: it.id, capability: "PowerMeter", attribute: "power", value: it.currentValue("power")]
+    }
+
+	presenceSensors.each {
+      resp << [id: it.id, capability: "PresenceSensor", attribute: "presence", value: it.currentValue("presence")]
+    }
+
+	relativeHumidityMeasurements.each {
+      resp << [id: it.id, capability: "RelativeHumidityMeasurement", attribute: "humidity", value: it.currentValue("humidity")]
+    }
+
+	relaySwitches.each {
+      resp << [id: it.id, capability: "RelaySwitch", attribute: "switch", value: it.currentValue("switch")]
+    }
+
+	signalStrengths.each {
+      resp << [id: it.id, capability: "SignalStrength", attribute: "lqi", value: it.currentValue("lqi")]
+    }
+
+	signalStrengths.each {
+      resp << [id: it.id, capability: "SignalStrength", attribute: "rssi", value: it.currentValue("rssi")]
+    }
+
+	sleepSensors.each {
+      resp << [id: it.id, capability: "SleepSensor", attribute: "sleeping", value: it.currentValue("sleeping")]
+    }
+
+	smokeDetectors.each {
+      resp << [id: it.id, capability: "SmokeDetector", attribute: "smoke", value: it.currentValue("smoke")]
+    }
+
+	stepSensors.each {
+      resp << [id: it.id, capability: "StepSensor", attribute: "steps", value: it.currentValue("steps")]
+    }
+
+	stepSensors.each {
+      resp << [id: it.id, capability: "StepSensor", attribute: "goal", value: it.currentValue("goal")]
+    }
+
+	switches.each {
+      resp << [id: it.id, capability: "Switch", attribute: "switch", value: it.currentValue("switch")]
+    }
+
+	switchLevels.each {
+      resp << [id: it.id, capability: "SwitchLevel", attribute: "level", value: it.currentValue("level")]
+    }
+
+	temperatureMeasurements.each {
+      resp << [id: it.id, capability: "TemperatureMeasurement", attribute: "temperature", value: it.currentValue("temperature")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "temperature", value: it.currentValue("temperature")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "heatingSetpoint", value: it.currentValue("heatingSetpoint")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "coolingSetpoint", value: it.currentValue("coolingSetpoint")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "thermostatSetpoint", value: it.currentValue("thermostatSetpoint")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "thermostatMode", value: it.currentValue("thermostatMode")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "thermostatFanMode", value: it.currentValue("thermostatFanMode")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "thermostatOperatingState", value: it.currentValue("thermostatOperatingState")]
+    }
+
+	threeAxes.each {
+      resp << [id: it.id, capability: "ThreeAxis", attribute: "threeAxis", value: it.currentValue("threeAxis")]
+    }
+
+	touchSensors.each {
+      resp << [id: it.id, capability: "TouchSensor", attribute: "touch", value: it.currentValue("touch")]
+    }
+
+	valves.each {
+      resp << [id: it.id, capability: "Valve", attribute: "contact", value: it.currentValue("contact")]
+    }
+
+	waterSensors.each {
+      resp << [id: it.id, capability: "WaterSensor", attribute: "water", value: it.currentValue("water")]
+    }
+   
+   	//resp << [id: 0, capability: "Heartbeat", attribute: "heartbeat", value: String.valueOf(state.heartbeat)]
+    
+    state.heartbeat = !state.heartbeat
+    
+    return resp
+}
+
+def getCurrentValuesWithDisplayName() {
+    def resp = []    
+        
+ 	accelerationSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "AccelerationSensor", attribute: "acceleration", value: it.currentValue("acceleration")]
+    }
+
+	alarms.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Alarm", attribute: "alarm", value: it.currentValue("alarm")]
+    }
+
+	batteries.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Battery", attribute: "battery", value: it.currentValue("battery")]
+    }
+
+	beacons.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Beacon", attribute: "presence", value: it.currentValue("presence")]
+    }
+
+	buttonGroup.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Button", attribute: "button", value: it.currentValue("button")]
+    }
+
+	carbonMonoxideDetectors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "CarbonMonoxideDetector", attribute: "carbonMonoxide", value: it.currentValue("carbonMonoxide")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ColorControl", attribute: "hue", value: it.currentValue("hue")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ColorControl", attribute: "saturation", value: it.currentValue("saturation")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ColorControl", attribute: "color", value: it.currentValue("color")]
+    }
+
+	contactSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ContactSensor", attribute: "contact", value: it.currentValue("contact")]
+    }
+
+	doorControls.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "DoorControl", attribute: "door", value: it.currentValue("door")]
+    }
+
+	energyMeters.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "EnergyMeter", attribute: "energy", value: it.currentValue("energy")]
+    }
+
+	illuminanceMeasurements.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "IlluminanceMeasurement", attribute: "illuminance", value: it.currentValue("illuminance")]
+    }
+
+	imageCaptures.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ImageCapture", attribute: "image", value: it.currentValue("image")]
+    }
+
+	locks.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Lock", attribute: "lock", value: it.currentValue("lock")]
+    }
+
+	mediaControllers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MediaController", attribute: "activities", value: it.currentValue("activities")]
+    }
+
+	mediaControllers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MediaController", attribute: "currentActivity", value: it.currentValue("currentActivity")]
+    }
+
+	motionSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MotionSensor", attribute: "motion", value: it.currentValue("motion")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "status", value: it.currentValue("status")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "level", value: it.currentValue("level")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "trackDescription", value: it.currentValue("trackDescription")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "trackData", value: it.currentValue("trackData")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "mute", value: it.currentValue("mute")]
+    }
+
+	powerMeters.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "PowerMeter", attribute: "power", value: it.currentValue("power")]
+    }
+
+	presenceSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "PresenceSensor", attribute: "presence", value: it.currentValue("presence")]
+    }
+
+	relativeHumidityMeasurements.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "RelativeHumidityMeasurement", attribute: "humidity", value: it.currentValue("humidity")]
+    }
+
+	relaySwitches.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "RelaySwitch", attribute: "switch", value: it.currentValue("switch")]
+    }
+
+	signalStrengths.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "SignalStrength", attribute: "lqi", value: it.currentValue("lqi")]
+    }
+
+	signalStrengths.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "SignalStrength", attribute: "rssi", value: it.currentValue("rssi")]
+    }
+
+	sleepSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "SleepSensor", attribute: "sleeping", value: it.currentValue("sleeping")]
+    }
+
+	smokeDetectors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "SmokeDetector", attribute: "smoke", value: it.currentValue("smoke")]
+    }
+
+	stepSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "StepSensor", attribute: "steps", value: it.currentValue("steps")]
+    }
+
+	stepSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "StepSensor", attribute: "goal", value: it.currentValue("goal")]
+    }
+
+	switches.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Switch", attribute: "switch", value: it.currentValue("switch")]
+    }
+
+	switchLevels.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "SwitchLevel", attribute: "level", value: it.currentValue("level")]
+    }
+
+	temperatureMeasurements.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "TemperatureMeasurement", attribute: "temperature", value: it.currentValue("temperature")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "temperature", value: it.currentValue("temperature")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "heatingSetpoint", value: it.currentValue("heatingSetpoint")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "coolingSetpoint", value: it.currentValue("coolingSetpoint")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatSetpoint", value: it.currentValue("thermostatSetpoint")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatMode", value: it.currentValue("thermostatMode")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatFanMode", value: it.currentValue("thermostatFanMode")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatOperatingState", value: it.currentValue("thermostatOperatingState")]
+    }
+
+	threeAxes.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ThreeAxis", attribute: "threeAxis", value: it.currentValue("threeAxis")]
+    }
+
+	touchSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "TouchSensor", attribute: "touch", value: it.currentValue("touch")]
+    }
+
+	valves.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Valve", attribute: "contact", value: it.currentValue("contact")]
+    }
+
+	waterSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "WaterSensor", attribute: "water", value: it.currentValue("water")]
+    }
+   
+    momentaries.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Momentary", attribute: "", value: ""]
+    }
+   
+    //resp << [id: 0, displayName: "Heartbeat", capability: "Heartbeat", attribute: "heartbeat", value: state.heartbeat]
+    
+    return resp
+}
+
+def getDevices(capability){
+
+	def result
+
+	switch (capability) {
+    	case "Alarm":
+        	result = alarms
+        	break
+    	case "ColorControl":
+        	result = colorControls
+        	break
+    	case "DoorControl":
+        	result = doorControls
+        	break
+        case "ImageCapture":
+        	result = imageCaptures
+        	break
+    	case "Lock":
+        	result = locks
+        	break
+        case "MediaController":
+        	result = mediaControllers
+        	break
+    	case "Momentary":
+        	result = momentaries
+        	break
+        case "MusicPlayer":
+        	result = musicPlayers
+        	break
+        case "RelaySwitch":
+        	result = relaySwitches
+        	break
+    	case "SpeechSynthesis":
+        	result = speechSyntheses
+        	break
+    	case "Switch":
+        	result = switches
+        	break
+        case "SwitchLevel":
+        	result = switchLevels
+        	break
+    	case "Thermostat":
+        	result = thermostats
+        	break
+		case "ThermostatCoolingSetpoint":
+        	result = thermostatCoolingSetpoints
+        	break
+    	case "ThermostatFanMode":
+        	result = thermostatFanModes
+        	break
+        case "ThermostatHeatingSetpoint":
+        	result = thermostatHeatingSetpoints
+        	break
+    	case "ThermostatMode":
+        	result = thermostatModes
+        	break
+    	case "Tone":
+        	result = tones
+        	break
+        case "Valve":
+        	result = valves
+        	break     
+    	default:
+        	result = valves
+	}
+	return result
+}
+
+def getDoorControlCommand(value){
+	def result
+	switch (value) {
+        case "closed":
+        	result = "close"
+        	break
+    	case "open":
+        	result = "open"
+        	break
+    	default:
+        	result = value
+	}    
+	return result
+}
+
+def getLockCommand(value){
+	def result
+	switch (value) {
+        case "locked":
+        	result = "lock"
+        	break
+    	case "unlocked":
+        	result = "unlock"
+        	break
+    	default:
+        	result = value
+	}    
+	return result
+}
+
+def getMuteCommand(value){
+	def result
+	switch (value) {
+        case "muted":
+        	result = "mute"
+        	break
+    	case "unmuted":
+        	result = "unmute"
+        	break
+    	default:
+        	result = value
+	}    
+	return result
+}
+
+def getContactCommand(value){
+	def result
+	switch (value) {
+        case "closed":
+        	result = "close"
+        	break
+    	case "open":
+        	result = "open"
+        	break
+    	default:
+        	result = value
+	}    
+	return result
+}
+
+def getRoutines() {
+	return location.helloHome?.getPhrases()*.label
+}
+
+def getThermostatFanModeCommand(value){
+	def result
+	switch (value) {
+        case "on":
+        	result = "fanOn"
+        	break
+    	case "auto":
+        	result = "fanAuto"
+        	break
+    	case "circulate":
+        	result = "fanCirculate"
+        	break
+    	default:
+        	result = value
+	}    
+	return result
+}
+
+void executeCommand() {    
+    def deviceId = request.JSON?.deviceId
+    def capability = request.JSON?.capability
+    def attribute = request.JSON?.attribute 
+    def value = request.JSON?.value    
+    if (deviceId) {
+		def devices = getDevices(capability)
+        def command
+        def valueIsParameter = false
+        def valueIsInteger = false
+        switch (attribute) {    	       	
+        	case "hue":
+        		command = "setHue"
+                valueIsParameter = true
+                valueIsInteger = true
+        		break
+    		case "saturation":
+        		command = "setSaturation"
+                valueIsParameter = true
+                valueIsInteger = true
+        		break
+    		case "color":
+        		command = "setColor"
+                def rgb = hexToRgb(value)
+                def hsl = rgbToHSL(rgb)
+                value = [hue:hsl.h.toInteger(), saturation:hsl.s.toInteger()]
+                valueIsParameter = true				
+        		break
+			case "level":
+        		command = "setLevel"
+                valueIsParameter = true
+                valueIsInteger = true
+        		break            
+        	case "heatingSetpoint":
+        		command = "setHeatingSetpoint"
+                valueIsParameter = true
+        		break    
+       		case "coolingSetpoint":
+        		command = "setCoolingSetpoint"
+                valueIsParameter = true
+        		break
+          	case "currentActivity":
+        		command = "startActivity"
+                valueIsParameter = true
+        		break  
+ 	  		case "door":
+        		command = getDoorControlCommand(value)
+        		break    
+      		case "lock":
+        		command = getLockCommand(value)
+        		break           
+      		case "mute":
+        		command = getMuteCommand(value)
+        		break         
+      		case "thermostatFanMode":
+        		command = getThermostatFanModeCommand(value)
+        		break         
+       		case "thermostatMode":
+        		if (value == "emergency heat") {
+                	command = "emergencyHeat"
+           		}
+                else
+                {
+                    command = value
+                }
+        		break     
+      		case "contact":
+        		command = getContactCommand(value)
+        		break
+    		default:
+        		command = value
+		}
+        devices.each {
+        	if (it.id == deviceId) {
+                // check that the device supports the specified command
+                // If not, return an error using httpError, providing a HTTP status code.
+            	if (!it.hasCommand(command)) {
+                	httpError(501, "$command is not a valid command for the device")
+            	}                
+                if(valueIsParameter){
+                	if(valueIsInteger){
+                		it."$command"(value as int)
+                	}
+                	else{
+                		it."$command"(value)
+                	}   
+                }
+                else{
+                	it."$command"()
+                }   
+           }       
+        }
+    }
+}
+
+void executeRoutine() {   
+	def routine = request.JSON?.routine
+    location.helloHome?.execute(routine)
+}
+
+def rgbToHSL(rgb) {
+	def r = rgb.r / 255
+    def g = rgb.g / 255
+    def b = rgb.b / 255
+    def h = 0
+    def s = 0
+    def l = 0
+    
+    def var_min = [r,g,b].min()
+    def var_max = [r,g,b].max()
+    def del_max = var_max - var_min
+    
+    l = (var_max + var_min) / 2
+    
+    if (del_max == 0) {
+            h = 0
+            s = 0
+    } else {
+    	if (l < 0.5) { s = del_max / (var_max + var_min) } 
+        else { s = del_max / (2 - var_max - var_min) }
+
+        def del_r = (((var_max - r) / 6) + (del_max / 2)) / del_max
+        def del_g = (((var_max - g) / 6) + (del_max / 2)) / del_max
+        def del_b = (((var_max - b) / 6) + (del_max / 2)) / del_max
+
+        if (r == var_max) { h = del_b - del_g } 
+        else if (g == var_max) { h = (1 / 3) + del_r - del_b } 
+        else if (b == var_max) { h = (2 / 3) + del_g - del_r }
+        
+		if (h < 0) { h += 1 }
+        if (h > 1) { h -= 1 }
+	}
+    def hsl = [:]    
+    hsl = [h: h * 100, s: s * 100, l: l]
+    
+    hsl
+}
+
+def hexToRgb(colorHex) {
+	def rrInt = Integer.parseInt(colorHex.substring(1,3),16)
+    def ggInt = Integer.parseInt(colorHex.substring(3,5),16)
+    def bbInt = Integer.parseInt(colorHex.substring(5,7),16)
+    
+    def colorData = [:]
+    colorData = [r: rrInt, g: ggInt, b: bbInt]
+    colorData
+}
+
+def installed() {
+	state.heartbeat = false
+}
+
+def updated() {
+	state.heartbeat = false
+}