MSA-1435: Create connection between Ubi device and Smartthings device.

DVCSMP-1742 DVCSMP-1513 Adding support for osram and iris ZigBee buttons

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -64,10 +64,8 @@ metadata {
     }
 
     standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
-        state "turningOff", label:'TURNING OFF', icon:"st.Electronics.electronics16", backgroundColor:"#ffffff"
-        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
-        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#79b821"
+        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff"
+        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821"
     }
     valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
         state "station1", label:'${currentValue}', action:"preset1"
@@ -749,16 +747,8 @@ def cb_boseSetInput(xml, input) {
  */
 def boseSetPowerState(boolean enable) {
     log.info "boseSetPowerState(${enable})"
-    // Fix to get faster update of power status back from speaker after sending on/off
-    // Instead of queuing the command to be sent after the refresh send it directly via sendHubCommand
-    // Note: This is a temporary hack that should be replaced by a re-design of the
-    // DTH to use sendHubCommand for all commands
-    sendHubCommand(bosePOST("/key", "<key state=\"press\" sender=\"Gabbo\">POWER</key>")) 
-    sendHubCommand(bosePOST("/key", "<key state=\"release\" sender=\"Gabbo\">POWER</key>"))
-    sendHubCommand(boseGET("/now_playing"))
-    if (enable) {
-        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", 5)
-    }
+    queueCallback('nowPlaying', "cb_boseSetPowerState", enable ? "POWERON" : "POWEROFF")
+    return boseRefreshNowPlaying()
 }
 
 /**
@@ -797,11 +787,10 @@ def cb_boseSetPowerState(xml, state) {
  */
 def cb_boseConfirmPowerOn(xml, tries) {
     def result = []
-    def attempt = tries as Integer
-    log.warn "boseConfirmPowerOn() attempt #$attempt"
-    if (xml.attributes()['source'] == "STANDBY" && attempt > 0) {
+    log.warn "boseConfirmPowerOn() attempt #" + tries
+    if (xml.attributes()['source'] == "STANDBY" && tries > 0) {
         result << boseRefreshNowPlaying()
-        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", attempt-1)
+        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", tries-1)
     }
     return result
 }

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -1,8 +1,7 @@
 /**
- *  Iris Smart Fob
+ *  ZigBee Button
  *
  *  Copyright 2015 Mitch Pond
- *	Presence code adapted from SmartThings Arrival Sensor HA device type
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -14,181 +13,235 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+
 metadata {
-	definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
-		capability "Battery"
-		capability "Button"
+    definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
+        capability "Actuator"
+        capability "Battery"
+        capability "Button"
         capability "Configuration"
-		capability "Presence Sensor"
-		capability "Sensor"
-        
-		//fingerprint endpointId: "01", profileId: "0104", inClusters: "0000,0001,0003,0007,0020,0B05", outClusters: "0003,0006,0019", model:"3450-L", manufacturer: "CentraLite"
-	}
-    
-    preferences{
-	    input ("holdTime", "number", title: "Minimum time in seconds for a press to count as \"held\"",
-    		defaultValue: 3, displayDuringSetup: false)
-        input "checkInterval", "enum", title: "Presence timeout (minutes)",
-            defaultValue:"2", options: ["2", "3", "5"], displayDuringSetup: false
-        input "logging", "bool", title: "Enable debug logging",
-            defaultValue: false, displayDuringSetup: false
+        capability "Refresh"
+        capability "Sensor"
+
+        command "enrollResponse"
+
+        fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
+        //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
+        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
+        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
     }
 
-	tiles(scale: 2) {
-    	standardTile("presence", "device.presence", width: 4, height: 4, canChangeBackground: true) {
-            state "present", label: "Present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
-            state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
-        }
-    	standardTile("button", "device.button", decoration: "flat", width: 2, height: 2) {
-        	state "default", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
-        }
-		valueTile("battery", "device.battery", decoration: "flat", width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
+    simulator {}
 
-		main (["presence"])
-		details(["presence","button","battery"])
-	}
+    preferences {
+        section {
+            input ("holdTime", "number", title: "Minimum time in seconds for a press to count as \"held\"", defaultValue: 1, displayDuringSetup: false)
+        }
+    }
+
+    tiles {
+        standardTile("button", "device.button", width: 2, height: 2) {
+            state "default", label: "", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
+            state "button 1 pushed", label: "pushed #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#79b821"
+        }
+
+        valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
+            state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        main (["button"])
+        details(["button", "battery", "refresh"])
+    }
 }
 
 def parse(String description) {
-    def descMap = zigbee.parseDescriptionAsMap(description)
-    logIt descMap
-    state.lastCheckin = now()
-    logIt "lastCheckin = ${state.lastCheckin}"
-    handlePresenceEvent(true)
-    
-	def results = []
-    if (description?.startsWith('catchall:'))
-		results = parseCatchAllMessage(descMap)
-	else if (description?.startsWith('read attr -'))
-		results = parseReportAttributeMessage(descMap)
-    else logIt(descMap, "trace")
-        
-	return results;
+    log.debug "description is $description"
+    def event = zigbee.getEvent(description)
+    if (event) {
+        sendEvent(event)
+    }
+    else {
+        if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
+            def descMap = zigbee.parseDescriptionAsMap(description)
+            if (descMap.clusterInt == 0x0001 && descMap.attrInt == 0x0020) {
+                event = getBatteryResult(zigbee.convertHexToInt(descMap.value))
+            }
+            else if (descMap.clusterInt == 0x0006 || descMap.clusterInt == 0x0008) {
+                event = parseNonIasButtonMessage(descMap)
+            }
+        }
+        else if (description?.startsWith('zone status')) {
+            event = parseIasButtonMessage(description)
+        }
+
+        log.debug "Parse returned $event"
+        def result = event ? createEvent(event) : []
+
+        if (description?.startsWith('enroll request')) {
+            List cmds = enrollResponse()
+            result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+        }
+        return result
+    }
+}
+
+private Map parseIasButtonMessage(String description) {
+    int zoneInt = Integer.parseInt((description - "zone status 0x"), 16)
+    if (zoneInt & 0x02) {
+        resultMap = getButtonResult('press')
+    } else {
+        resultMap = getButtonResult('release')
+    }
+
+    return resultMap
+}
+
+private Map getBatteryResult(rawValue) {
+    log.debug 'Battery'
+    def volts = rawValue / 10
+    if (volts > 3.0 || volts == 0 || rawValue == 0xFF) {
+        return [:]
+    }
+    else {
+        def result = [
+                name: 'battery'
+        ]
+        def minVolts = 2.1
+        def maxVolts = 3.0
+        def pct = (volts - minVolts) / (maxVolts - minVolts)
+        result.value = Math.min(100, (int) pct * 100)
+        def linkText = getLinkText(device)
+        result.descriptionText = "${linkText} battery was ${result.value}%"
+        return result
+    }
+}
+
+private Map parseNonIasButtonMessage(Map descMap){
+    def buttonState = ""
+    def buttonNumber = 0
+    if (((device.getDataValue("model") == "3460-L") || (device.getDataValue("model") == "3450-L"))
+            &&(descMap.clusterInt == 0x0006)) {
+        if (descMap.command == "01") {
+            getButtonResult("press")
+        }
+        else if (descMap.command == "00") {
+            getButtonResult("release")
+        }
+    }
+    else if (descMap.clusterInt == 0x0006) {
+        buttonState = "pushed"
+        if (descMap.command == "01") {
+            buttonNumber = 1
+        }
+        else if (descMap.command == "00") {
+            buttonNumber = 2
+        }
+        if (buttonNumber !=0) {
+            def descriptionText = "$device.displayName button $buttonNumber was $buttonState"
+            return createEvent(name: "button", value: buttonState, data: [buttonNumber: buttonNumber], descriptionText: descriptionText, isStateChange: true)
+        }
+        else {
+            return [:]
+        }
+    }
+    else if (descMap.clusterInt == 0x0008) {
+        if (descMap.command == "05") {
+            state.buttonNumber = 1
+            getButtonResult("press", 1)
+        }
+        else if (descMap.command == "01") {
+            state.buttonNumber = 2
+            getButtonResult("press", 2)
+        }
+        else if (descMap.command == "03") {
+            getButtonResult("release", state.buttonNumber)
+        }
+    }
+}
+
+def refresh() {
+    log.debug "Refreshing Battery"
+
+    return zigbee.readAttribute(0x0001, 0x20) +
+            zigbee.enrollResponse()
+}
+
+def configure() {
+    log.debug "Configuring Reporting, IAS CIE, and Bindings."
+    def cmds = []
+    if (device.getDataValue("model") == "3450-L") {
+        cmds << [
+                "zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 300",
+                "zdo bind 0x${device.deviceNetworkId} 2 1 6 {${device.zigbeeId}} {}", "delay 300",
+                "zdo bind 0x${device.deviceNetworkId} 3 1 6 {${device.zigbeeId}} {}", "delay 300",
+                "zdo bind 0x${device.deviceNetworkId} 4 1 6 {${device.zigbeeId}} {}", "delay 300"
+        ]
+    }
+    return zigbee.onOffConfig() +
+            zigbee.levelConfig() +
+            zigbee.configureReporting(0x0001, 0x20, 0x20, 30, 21600, 0x01) +
+            zigbee.enrollResponse() +
+            zigbee.readAttribute(0x0001, 0x20) +
+            cmds
+
+}
+
+private Map getButtonResult(buttonState, buttonNumber = 1) {
+    if (buttonState == 'release') {
+        log.debug "Button was value : $buttonState"
+        def timeDiff = now() - state.pressTime
+        log.info "timeDiff: $timeDiff"
+        def holdPreference = holdTime ?: 1
+        log.info "holdp1 : $holdPreference"
+        holdPreference = (holdPreference as int) * 1000
+        log.info "holdp2 : $holdPreference"
+        if (timeDiff > 10000) {         //timeDiff>10sec check for refresh sending release value causing actions to be executed
+            return [:]
+        }
+        else {
+            if (timeDiff < holdPreference) {
+                buttonState = "pushed"
+            }
+            else {
+                buttonState = "held"
+            }
+            def descriptionText = "$device.displayName button $buttonNumber was $buttonState"
+            return createEvent(name: "button", value: buttonState, data: [buttonNumber: buttonNumber], descriptionText: descriptionText, isStateChange: true)
+        }
+    }
+    else if (buttonState == 'press') {
+        log.debug "Button was value : $buttonState"
+        state.pressTime = now()
+        log.info "presstime: ${state.pressTime}"
+        return [:]
+    }
+}
+
+def installed() {
+    initialize()
 }
 
 def updated() {
-	startTimer()
-    configure()
+    initialize()
 }
 
-def configure(){
-	logIt "Configuring Smart Fob..."
-	[
-	"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
-    "zdo bind 0x${device.deviceNetworkId} 2 1 6 {${device.zigbeeId}} {}", "delay 200",
-    "zdo bind 0x${device.deviceNetworkId} 3 1 6 {${device.zigbeeId}} {}", "delay 200",
-    "zdo bind 0x${device.deviceNetworkId} 4 1 6 {${device.zigbeeId}} {}", "delay 200",
-    "zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 200"
-    ] +
-    zigbee.configureReporting(0x0001,0x0020,0x20,20,20,0x01)
-}
-
-def parseCatchAllMessage(descMap) {
-    if (descMap?.clusterId == "0006" && descMap?.command == "01") 		//button pressed
-    	handleButtonPress(descMap.sourceEndpoint as int)
-    else if (descMap?.clusterId == "0006" && descMap?.command == "00") 	//button released
-    	handleButtonRelease(descMap.sourceEndpoint as int)
-    else logIt("Parse: Unhandled message: ${descMap}","trace")
-}
-
-def parseReportAttributeMessage(descMap) {
-	if (descMap?.cluster == "0001" && descMap?.attrId == "0020") createBatteryEvent(getBatteryLevel(descMap.value))
-    else logIt descMap
-}
-
-private createBatteryEvent(percent) {
-	logIt "Battery level at " + percent
-	return createEvent([name: "battery", value: percent])
-}
-
-//this method determines if a press should count as a push or a hold and returns the relevant event type
-private handleButtonRelease(button) {
-	logIt "lastPress state variable: ${state.lastPress}"
-    def sequenceError = {logIt("Uh oh...missed a message? Dropping this event.", "error"); state.lastPress = null; return []}	
-    
-    if (!state.lastPress) return sequenceError()
-	else if (state.lastPress.button != button) return sequenceError()
-    
-    def currentTime = now()
-    def startOfPress = state.lastPress?.time
-    def timeDif = currentTime - startOfPress
-    def holdTimeMillisec = (settings.holdTime?:3).toInteger() * 1000
-    
-    state.lastPress = null	//we're done with this. clear it to make error conditions easier to catch
-    
-    if (timeDif < 0) 
-    //likely a message sequence issue or dropped packet. Drop this press and wait for another.
-    	return sequenceError()
-    else if (timeDif < holdTimeMillisec)
-    	return createButtonEvent(button,"pushed")
-    else 
-    	return createButtonEvent(button,"held")
-}
-
-private handleButtonPress(button) {
-	state.lastPress = [button: button, time: now()]
-}
-
-private createButtonEvent(button,action) {
-	logIt "Button ${button} ${action}"
-	return createEvent([
-    	name: "button",
-        value: action, 
-        data:[buttonNumber: button], 
-        descriptionText: "${device.displayName} button ${button} was ${action}",
-        isStateChange: true, 
-        displayed: true])
-}
-
-private getBatteryLevel(rawValue) {
-	def intValue = Integer.parseInt(rawValue,16)
-	def min = 2.1
-    def max = 3.0
-    def vBatt = intValue / 10
-    return ((vBatt - min) / (max - min) * 100) as int
-}
-
-private handlePresenceEvent(present) {
-    def wasPresent = device.currentState("presence")?.value == "present"
-    if (!wasPresent && present) {
-        logIt "Sensor is present"
-        startTimer()
-    } else if (!present) {
-        logIt "Sensor is not present"
-        stopTimer()
+def initialize() {
+    if ((device.getDataValue("manufacturer") == "OSRAM") && (device.getDataValue("model") == "LIGHTIFY Dimming Switch")) {
+        sendEvent(name: "numberOfButtons", value: 2)
     }
-    def linkText = getLinkText(device)
-    def eventMap = [
-        name: "presence",
-        value: present ? "present" : "not present",
-        linkText: linkText,
-        descriptionText: "${linkText} has ${present ? 'arrived' : 'left'}",
-    ]
-    logIt "Creating presence event: ${eventMap}"
-    sendEvent(eventMap)
-}
-
-private startTimer() {
-    logIt "Scheduling periodic timer"
-    schedule("0 * * * * ?", checkPresenceCallback)
-}
-
-private stopTimer() {
-    logIt "Stopping periodic timer"
-    unschedule()
-}
-
-def checkPresenceCallback() {
-    def timeSinceLastCheckin = (now() - state.lastCheckin) / 1000
-    def theCheckInterval = (checkInterval ? checkInterval as int : 2) * 60
-    logIt "Sensor checked in ${timeSinceLastCheckin} seconds ago"
-    if (timeSinceLastCheckin >= theCheckInterval) {
-        handlePresenceEvent(false)
+    else if ((device.getDataValue("manufacturer") == "CentraLite") &&
+            ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L"))) {
+        sendEvent(name: "numberOfButtons", value: 1)
     }
+    else if ((device.getDataValue("manufacturer") == "CentraLite") && (device.getDataValue("model") == "3450-L")) {
+        sendEvent(name: "numberOfButtons", value: 4)
+    }
+    else {
+        //default. can be changed
+        sendEvent(name: "numberOfButtons", value: 4)
+    }
+
 }
-
-// ****** Utility functions ******
-
-private logIt(str, logLevel = 'debug') {if (settings.logging) log."$logLevel"(str) }

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -20,7 +20,6 @@ metadata {
         capability "Switch"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
     }
 
     // simulator metadata

smartapps/ucic-io/ubi.src/ubi.groovy

@@ -0,0 +1,520 @@
+/**
+ *  Ubi
+ *
+ *  Copyright 2016 UCIC
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Ubi",
+    namespace: "ucic.io",
+    author: "UCIC",
+    description: "Connect Ubi with SmartThings",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/ubi-app-icn.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/ubi-app-icn@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Partner/ubi-app-icn@2x.png",
+    oauth: true)
+
+
+preferences {
+	section("Allow a web application to control these things...") {
+		input name: "switches", type: "capability.switch", title: "Which Switches?", multiple: true, required: false
+		input name: "motions", type: "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false
+		input name: "locks", type: "capability.lock", title: "Which Locks?", multiple: true, required: false
+		input name: "contactSensors", type: "capability.contactSensor", title: "Which Contact Sensors?", multiple: true, required: false
+		input name: "presenceSensors", type: "capability.presenceSensor", title: "Which Presence Sensors?", multiple: true, required: false
+	}
+}
+
+mappings {
+	path("/list") {
+		action: [
+			GET: "listAll"
+		]
+	}
+
+	path("/events/:id") {
+		action: [
+			GET: "showEvents"
+		]
+	}
+
+	path("/switches") {
+		action: [
+			GET: "listSwitches",
+			PUT: "updateSwitches",
+			POST: "updateSwitches"
+		]
+	}
+	path("/switches/:id") {
+		action: [
+			GET: "showSwitch",
+			PUT: "updateSwitch",
+			POST: "updateSwitch"
+		]
+	}
+	path("/switches/subscriptions") {
+		//log.debug "switches added"
+		action: [
+			POST: "addSwitchSubscription"
+		]
+	}
+	path("/switches/subscriptions/:id") {
+		action: [
+			DELETE: "removeSwitchSubscription",
+			GET: "removeSwitchSubscription"
+		]
+	}
+
+	path("/motionSensors") {
+		action: [
+			GET: "listMotions",
+			PUT: "updateMotions",
+			POST: "updateMotions"
+
+		]
+	}
+	path("/motionSensors/:id") {
+		action: [
+			GET: "showMotion",
+			PUT: "updateMotion",
+			POST: "updateMotion"
+		]
+	}
+	path("/motionSensors/subscriptions") {
+		//log.debug "motionSensors added"
+		action: [
+			POST: "addMotionSubscription"
+		]
+	}
+	path("/motionSensors/subscriptions/:id") {
+		//log.debug "motionSensors Deleted"
+		action: [
+			DELETE: "removeMotionSubscription",
+			GET: "removeMotionSubscription"
+		]
+	}
+
+	path("/locks") {
+		action: [
+			GET: "listLocks",
+			PUT: "updateLock",
+			POST: "updateLock"
+		]
+	}
+	path("/locks/:id") {
+		action: [
+			GET: "showLock",
+			PUT: "updateLock",
+			POST: "updateLock"
+		]
+	}
+	path("/locks/subscriptions") {
+		action: [
+			POST: "addLockSubscription"
+		]
+	}
+	path("/locks/subscriptions/:id") {
+		action: [
+			DELETE: "removeLockSubscription",
+			GET: "removeLockSubscription"
+		]
+	}
+
+	path("/contactSensors") {
+		action: [
+			GET: "listContactSensors",
+			PUT: "updateContactSensor",
+			POST: "updateContactSensor"
+		]
+	}
+	path("/contactSensors/:id") {
+		action: [
+			GET: "showContactSensor",
+			PUT: "updateContactSensor",
+			POST: "updateContactSensor"
+		]
+	}
+	path("/contactSensors/subscriptions") {
+		log.debug "contactSensors/subscriptions"
+		action: [
+			POST: "addContactSubscription"
+		]
+	}
+	path("/contactSensors/subscriptions/:id") {
+		action: [
+			DELETE: "removeContactSensorSubscription",
+			GET: "removeContactSensorSubscription"
+		]
+	}
+
+	path("/presenceSensors") {
+		action: [
+			GET: "listPresenceSensors",
+			PUT: "updatePresenceSensor",
+			POST: "updatePresenceSensor"
+		]
+	}
+	path("/presenceSensors/:id") {
+		action: [
+			GET: "showPresenceSensor",
+			PUT: "updatePresenceSensor",
+			POST: "updatePresenceSensor"
+		]
+	}
+	path("/presenceSensors/subscriptions") {
+		//log.debug "PresenceSensors/subscriptions"
+		action: [
+			POST: "addPresenceSubscription"
+		]
+	}
+	path("/presenceSensors/subscriptions/:id") {
+		action: [
+			DELETE: "removePresenceSensorSubscription",
+			GET: "removePresenceSensorSubscription"
+		]
+	}
+
+	path("/state") {
+		action: [
+			GET: "currentState"
+		]
+	}
+
+	path("/phrases") {
+		action: [
+			GET: "listPhrases"
+		]
+	}
+	path("/phrases/:phraseName") {
+		action: [
+			GET: "executePhrase",
+			POST: "executePhrase",
+		]
+	}
+
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	//unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+    log.debug "initialize, do nothing..."
+}
+
+def listAll() {
+	listSwitches() + listMotions() + listLocks() + listContactSensors() + listPresenceSensors()
+}
+
+def listContactSensors() {
+	contactSensors.collect { device(it, "contactSensor") }
+}
+
+
+void updateContactSensors() {
+	updateAll(contactSensors)
+}
+
+def showContactSensor() {
+	show(contactSensors, "contact")
+}
+
+void updateContactSensor() {
+	update(contactSensors)
+}
+
+def addContactSubscription() {
+	log.debug "addContactSensorSubscription,  params: ${params}"
+	addSubscription(contactSensors, "contact")
+}
+
+def removeContactSensorSubscription() {
+	removeSubscription(contactSensors)
+}
+
+
+def listPresenceSensors() {
+	presenceSensors.collect { device(it, "presenceSensor") }
+}
+
+
+void updatePresenceSensors() {
+	updateAll(presenceSensors)
+}
+
+def showPresenceSensor() {
+	show(presenceSensors, "presence")
+}
+
+void updatePresenceSensor() {
+	update(presenceSensors)
+}
+
+def addPresenceSubscription() {
+	log.debug "addPresenceSensorSubscription,  params: ${params}"
+	addSubscription(presenceSensors, "presence")
+}
+
+def removePresenceSensorSubscription() {
+	removeSubscription(presenceSensors)
+}
+
+
+def listSwitches() {
+	switches.collect { device(it, "switch") }
+}
+
+void updateSwitches() {
+	updateAll(switches)
+}
+
+def showSwitch() {
+	show(switches, "switch")
+}
+
+void updateSwitch() {
+	update(switches)
+}
+
+def addSwitchSubscription() {
+	log.debug "addSwitchSubscription,  params: ${params}"
+	addSubscription(switches, "switch")
+}
+
+def removeSwitchSubscription() {
+	removeSubscription(switches)
+}
+
+def listMotions() {
+	motions.collect { device(it, "motionSensor") }
+}
+
+void updateMotions() {
+	updateAll(motions)
+}
+
+def showMotion() {
+	show(motions, "motion")
+}
+
+void updateMotion() {
+	update(motions)
+}
+
+def addMotionSubscription() {
+
+	addSubscription(motions, "motion")
+}
+
+def removeMotionSubscription() {
+	removeSubscription(motions)
+}
+
+def listLocks() {
+	locks.collect { device(it, "lock") }
+}
+
+void updateLocks() {
+	updateAll(locks)
+}
+
+def showLock() {
+	show(locks, "lock")
+}
+
+void updateLock() {
+	update(locks)
+}
+
+def addLockSubscription() {
+	addSubscription(locks, "lock")
+}
+
+def removeLockSubscription() {
+	removeSubscription(locks)
+}
+
+/*
+def motionOpenHandler(evt) {
+//log.trace "$evt.value: $evt, $settings"
+
+	log.debug "$motions was active, sending push message to user"
+	//sendPush("Your ${contact1.label ?: contact1.name} was opened")
+
+
+	httpPostJson(uri: "http://automatesolutions.ca/test.php", path: '', body: [evt: [value: "motionSensor Active"]]) {
+	log.debug "Event data successfully posted"
+    }
+
+}
+def contactOpenHandler(evt) {
+	//log.trace "$evt.value: $evt, $settings"
+
+	log.debug "$contactSensors was opened, sending push message to user"
+	//sendPush("Your ${contact1.label ?: contact1.name} was opened")
+
+
+	httpPostJson(uri: "http://automatesolutions.ca/test.php", path: '', body: [evt: [value: "ContactSensor Opened"]]) {
+	log.debug "Event data successfully posted"
+    }
+
+
+}
+*/
+
+
+def deviceHandler(evt) {
+	log.debug "~~~~~TEST~~~~~~"
+	def deviceInfo = state[evt.deviceId]
+	if (deviceInfo)
+	{
+		httpPostJson(uri: deviceInfo.callbackUrl, path: '', body: [evt: [value: evt.value]]) {
+			log.debug "Event data successfully posted"
+		}
+	}
+	else
+	{
+		log.debug "No subscribed device found"
+	}
+}
+
+def currentState() {
+	state
+}
+
+def showStates() {
+	def device = (switches + motions + locks).find { it.id == params.id }
+	if (!device)
+	{
+		httpError(404, "Switch not found")
+	}
+	else
+	{
+		device.events(params)
+	}
+}
+
+def listPhrases() {
+	location.helloHome.getPhrases().label
+}
+
+def executePhrase() {
+	def phraseName = params.phraseName
+	if (phraseName)
+	{
+		location.helloHome.execute(phraseName)
+		log.debug "executed phrase: $phraseName"
+	}
+	else
+	{
+		httpError(404, "Phrase not found")
+	}
+}
+
+private void updateAll(devices) {
+	def command = request.JSON?.command
+	if (command)
+	{
+		command = command.toLowerCase()
+		devices."$command"()
+	}
+}
+
+private void update(devices) {
+	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
+	//def command = request.JSON?.command
+	def command = params.command
+	if (command)
+	{
+		command = command.toLowerCase()
+		def device = devices.find { it.id == params.id }
+		if (!device)
+		{
+			httpError(404, "Device not found")
+		}
+		else
+		{
+			device."$command"()
+		}
+	}
+}
+
+private show(devices, type) {
+	def device = devices.find { it.id == params.id }
+	if (!device)
+	{
+		httpError(404, "Device not found")
+	}
+	else
+	{
+
+		def attributeName = type
+
+
+
+		def s = device.currentState(attributeName)
+		[id: device.id, label: device.displayName, value: s?.value, unitTime: s?.date?.time, type: type]
+	}
+}
+
+private addSubscription(devices, attribute) {
+	//def deviceId = request.JSON?.deviceId
+	//def callbackUrl = request.JSON?.callbackUrl
+
+	log.debug "addSubscription,  params: ${params}"
+
+	def deviceId = params.deviceId
+	def callbackUrl = params.callbackUrl
+
+
+
+
+	def myDevice = devices.find { it.id == deviceId }
+	if (myDevice)
+	{
+		if (state[deviceId])
+		{
+			log.debug "Switch subscription already exists, unsubcribing"
+			unsubscribe(myDevice)
+		}
+		log.debug "Adding switch subscription" + callbackUrl
+		state[deviceId] = [callbackUrl: callbackUrl]
+		log.debug "Added state: $state"
+		subscribe(myDevice, attribute, deviceHandler)
+	}
+}
+
+private removeSubscription(devices) {
+	def deviceId = params.id
+	def device = devices.find { it.id == deviceId }
+	if (device)
+	{
+		log.debug "Removing $device.displayName subscription"
+		state.remove(device.id)
+		unsubscribe(device)
+	}
+}
+
+private device(it, type) {
+	it ? [id: it.id, label: it.displayName, type: type] : null
+}