MSA-1241: test

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,14 +22,12 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
 		attribute "powerSupply", "enum", ["USB Cable", "Battery"]
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
-		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A,0x5A"
 	}
 
 	simulator {
@@ -328,9 +326,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device user configured or default 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2* (timeOptionValueMap[reportInterval] ?: (2*8*60)), displayed: false)
-
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
 	def request = []
@@ -357,7 +352,7 @@ def configure() {
 									motionSensitivity == "minimum" ? 0 : 64)
 
 	//5. report every x minutes (threshold reports don't work on battery power, default 8 mins)
-	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: (8*60)) //association group 1
+	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: 8*60) //association group 1
 
 	request << zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 6*60*60)  //association group 2
 

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,9 +20,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
-
-		command "configureAfterSecure"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 	}
@@ -248,8 +245,6 @@ def configureAfterSecure() {
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
-	// allow device 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*8*60, displayed: false)
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -181,9 +180,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device 10 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*5*60, displayed: false)
-
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
 		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2).format(),

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -12,6 +12,16 @@
  *
  */
  
+ /*
+ *  Purpose: Arrival Sensor HA DTH File
+ *
+ *  Filename: Arrival-Sensor-HA.src/Arrival-Sensor-HA.groovy
+ *
+ *  Change History:
+ *  1. 20160115 TW - Update/Edit to support i18n translations
+ *  2. 20160121 TW - Update to V4 battery calcs, added pref's page title translations
+ */
+ 
 metadata {
     definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
         capability "Tone"

devicetypes/smartthings/arrival-sensor-ha.src/i18n/messages.properties

@@ -1,3 +1,4 @@
+#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -11,6 +12,15 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
+#==============================================================================
+# Purpose: Arrival Sensor HA i18n Translation File
+#
+# Filename: Arrival-Sensor-HA.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160115 TW Initial release with informal Korean translation.
+#	2. 20160121 TW Added def preference section titles.
+#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Give your device a name'''.ko=기기 이름 설정

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -64,10 +64,8 @@ metadata {
     }
 
     standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
-        state "turningOff", label:'TURNING OFF', icon:"st.Electronics.electronics16", backgroundColor:"#ffffff"
-        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
-        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#79b821"
+        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff"
+        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821"
     }
     valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
         state "station1", label:'${currentValue}', action:"preset1"
@@ -749,16 +747,8 @@ def cb_boseSetInput(xml, input) {
  */
 def boseSetPowerState(boolean enable) {
     log.info "boseSetPowerState(${enable})"
-    // Fix to get faster update of power status back from speaker after sending on/off
-    // Instead of queuing the command to be sent after the refresh send it directly via sendHubCommand
-    // Note: This is a temporary hack that should be replaced by a re-design of the
-    // DTH to use sendHubCommand for all commands
-    sendHubCommand(bosePOST("/key", "<key state=\"press\" sender=\"Gabbo\">POWER</key>")) 
-    sendHubCommand(bosePOST("/key", "<key state=\"release\" sender=\"Gabbo\">POWER</key>"))
-    sendHubCommand(boseGET("/now_playing"))
-    if (enable) {
-        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", 5)
-    }
+    queueCallback('nowPlaying', "cb_boseSetPowerState", enable ? "POWERON" : "POWEROFF")
+    return boseRefreshNowPlaying()
 }
 
 /**
@@ -797,11 +787,10 @@ def cb_boseSetPowerState(xml, state) {
  */
 def cb_boseConfirmPowerOn(xml, tries) {
     def result = []
-    def attempt = tries as Integer
-    log.warn "boseConfirmPowerOn() attempt #$attempt"
-    if (xml.attributes()['source'] == "STANDBY" && attempt > 0) {
+    log.warn "boseConfirmPowerOn() attempt #" + tries
+    if (xml.attributes()['source'] == "STANDBY" && tries > 0) {
         result << boseRefreshNowPlaying()
-        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", attempt-1)
+        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", tries-1)
     }
     return result
 }

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -13,13 +13,12 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
+ 
 metadata {
     definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Configuration"
-        capability "Polling"
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
@@ -89,10 +88,6 @@ def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
-def poll() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
-}
-
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -21,9 +21,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 
-		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
-		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
-		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "Z-Wave Plug-In Dimmer"
+		fingerprint inClusters: "0x26"
 	}
 
 	simulator {
@@ -44,10 +42,6 @@ metadata {
 		reply "200163,delay 5000,2602": "command: 2603, payload: 63"
 	}
 
-	preferences {
-		input "ledIndicator", "enum", title: "LED Indicator", description: "Turn LED indicator... ", required: false, options:["on": "When On", "off": "When Off", "never": "Never"], defaultValue: "off"
-	}
-
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
@@ -76,28 +70,11 @@ metadata {
 		}
 
 		main(["switch"])
-		details(["switch", "level", "refresh"])
+		details(["switch", "level", "indicator", "refresh"])
 
 	}
 }
 
-def updated(){
-  switch (ledIndicator) {
-        case "on":
-            indicatorWhenOn()
-            break
-        case "off":
-            indicatorWhenOff()
-            break
-        case "never":
-            indicatorNever()
-            break
-        default:
-            indicatorWhenOn()
-            break
-    }
-}
-
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
@@ -161,7 +138,6 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	log.debug "productTypeId:    ${cmd.productTypeId}"
 	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
 	updateDataValue("MSR", msr)
-	updateDataValue("manufacturer", cmd.manufacturerName)
 	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 
@@ -225,19 +201,19 @@ def refresh() {
 	delayBetween(commands,100)
 }
 
-void indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on", display: false)
-	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
+def indicatorWhenOn() {
+	sendEvent(name: "indicatorStatus", value: "when on")
+	zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()
 }
 
-void indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off", display: false)
-	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
+def indicatorWhenOff() {
+	sendEvent(name: "indicatorStatus", value: "when off")
+	zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()
 }
 
-void indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never", display: false)
-	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
+def indicatorNever() {
+	sendEvent(name: "indicatorStatus", value: "never")
+	zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()
 }
 
 def invertSwitch(invert=true) {
@@ -247,4 +223,4 @@ def invertSwitch(invert=true) {
 	else {
 		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
 	}
-}
+}

devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy

@@ -21,7 +21,6 @@ metadata {
         attribute "tamper", "enum", ["detected", "clear"]
         attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
-        fingerprint mfr:"010F", prod:"0C02", model:"1002"
     }
     simulator {
         //battery

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -1,7 +1,7 @@
 /**
  *  GE Link Bulb
  *
- *  Copyright 2016 SmartThings
+ *  Copyright 2014 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -53,8 +53,6 @@ metadata {
         capability "Polling"
 
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE_Appliances", model: "ZLL Light", deviceJoinName: "GE Link Bulb"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE", model: "SoftWhite", deviceJoinName: "GE Link Soft White Bulb"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE", model: "Daylight", deviceJoinName: "GE Link Daylight Bulb"
     }
 
 	// UI tile definitions

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -37,13 +37,16 @@ metadata {
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
             }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
+			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}
 		}
 
 		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:"Reset To White", action:"reset", icon:"st.lights.philips.hue-single"
+			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
 
 		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
@@ -51,7 +54,7 @@ metadata {
 		}
 
 		main(["rich-control"])
-		details(["rich-control", "reset", "refresh"])
+		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
 	}
 }
 
@@ -75,78 +78,118 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
+	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
+	sendEvent(name: "switch", value: "off")
+}
+
+void nextLevel() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level <= 100) {
+		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
+	}
+	else {
+		level = 25
+	}
+	setLevel(level)
 }
 
 void setLevel(percent) {
     log.debug "Executing 'setLevel'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setLevel(this, percent)
+        parent.setLevel(this, percent)
+        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
+        sendEvent(name: "switch", value: "on")
     }
 }
 
 void setSaturation(percent) {
     log.debug "Executing 'setSaturation'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setSaturation(this, percent)
+        parent.setSaturation(this, percent)
+        sendEvent(name: "saturation", value: percent, displayed: false)
     }
 }
 
 void setHue(percent) {
     log.debug "Executing 'setHue'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setHue(this, percent)
+        parent.setHue(this, percent)
+        sendEvent(name: "hue", value: percent, displayed: false)
     }
 }
 
 void setColor(value) {
+    log.debug "setColor: ${value}, $this"
     def events = []
     def validValues = [:]
 
     if (verifyPercent(value.hue)) {
+        events << createEvent(name: "hue", value: value.hue, displayed: false)
         validValues.hue = value.hue
     }
     if (verifyPercent(value.saturation)) {
+        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
         validValues.saturation = value.saturation
     }
     if (value.hex != null) {
         if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
+            events << createEvent(name: "color", value: value.hex)
             validValues.hex = value.hex
         } else {
             log.warn "$value.hex is not a valid color"
         }
     }
     if (verifyPercent(value.level)) {
+        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
         validValues.level = value.level
     }
     if (value.switch == "off" || (value.level != null && value.level <= 0)) {
+        events << createEvent(name: "switch", value: "off")
         validValues.switch = "off"
     } else {
+        events << createEvent(name: "switch", value: "on")
         validValues.switch = "on"
     }
-    if (!validValues.isEmpty()) {
-	    log.trace parent.setColor(this, validValues)
+    if (!events.isEmpty()) {
+        parent.setColor(this, validValues)
+    }
+    events.each {
+        sendEvent(it)
     }
 }
 
 void reset() {
     log.debug "Executing 'reset'"
-	def value = [hue:20, saturation:2]
-	setAdjustedColor(value)
+    def value = [level:100, saturation:56, hue:23]
+    setAdjustedColor(value)
+    parent.poll()
 }
 
 void setAdjustedColor(value) {
     if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
+        adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
         adjusted.level = null
-	    setColor(adjusted)
+        setColor(adjusted)
     } else {
-        log.warn "Invalid color input $value"
+        log.warn "Invalid color input"
+    }
+}
+
+void setColorTemperature(value) {
+    if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "Invalid color temperature"
     }
 }
 
@@ -155,6 +198,22 @@ void refresh() {
     parent.manualRefresh()
 }
 
+def adjustOutgoingHue(percent) {
+	def adjusted = percent
+	if (percent > 31) {
+		if (percent < 63.0) {
+			adjusted = percent + (7 * (percent -30 ) / 32)
+		}
+		else if (percent < 73.0) {
+			adjusted = 69 + (5 * (percent - 62) / 10)
+		}
+		else {
+			adjusted = percent + (2 * (100 - percent) / 28)
+		}
+	}
+	log.info "percent: $percent, adjusted: $adjusted"
+	adjusted
+}
 
 def verifyPercent(percent) {
     if (percent == null)

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,13 +7,8 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
+		attribute "serialNumber", "string"
 		attribute "networkAddress", "string"
-        // Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
-        // Possible values "Online" or "Offline"
-		attribute "status", "string"
-		// Id is the number on the back of the hub, Hue uses last six digits of Mac address
-		// This is also used in the Hue application as ID
-		attribute "idNumber", "string"
 	}
 
 	simulator {
@@ -22,23 +17,22 @@ metadata {
 
 	tiles(scale: 2) {
      	multiAttributeTile(name:"rich-control"){
-			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
-				attributeState "Offline", label: '${currentValue}', action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#ffffff"
-	            attributeState "Online", label: '${currentValue}', action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#79b821"
+			tileAttribute ("", key: "PRIMARY_CONTROL") {
+	            attributeState "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#F3C200"
 			}
+	        tileAttribute ("serialNumber", key: "SECONDARY_CONTROL") {
+	            attributeState "default", label:'SN: ${currentValue}'
 			}
-		valueTile("doNotRemove", "v", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
-			state "default", label:'Do not remove'
         }
-		valueTile("idNumber", "device.idNumber", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
-			state "default", label:'ID: ${currentValue}'
+		valueTile("serialNumber", "device.serialNumber", decoration: "flat", height: 1, width: 2, inactiveLabel: false) {
+			state "default", label:'SN: ${currentValue}'
 		}
-		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
-			state "default", label:'IP: ${currentValue}'
+		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 2, width: 4, inactiveLabel: false) {
+			state "default", label:'${currentValue}', height: 1, width: 2, inactiveLabel: false
 		}
 
 		main (["rich-control"])
-		details(["rich-control", "idNumber", "networkAddress", "doNotRemove"])
+		details(["rich-control", "networkAddress"])
 	}
 }
 

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -38,21 +38,24 @@ metadata {
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
             }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
+			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}
 		}
 
-    controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
-        state "colorTemperature", action:"color temperature.setColorTemperature"
-    }
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
 
-    valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-        state "colorTemperature", label: 'WHITES'
-    }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
 
 		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:"Reset To White", action:"reset", icon:"st.lights.philips.hue-single"
+			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
 
 		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
@@ -84,86 +87,118 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
+	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
+	sendEvent(name: "switch", value: "off")
+}
+
+void nextLevel() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level <= 100) {
+		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
+	}
+	else {
+		level = 25
+	}
+	setLevel(level)
 }
 
 void setLevel(percent) {
     log.debug "Executing 'setLevel'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setLevel(this, percent)
+        parent.setLevel(this, percent)
+        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
+        sendEvent(name: "switch", value: "on")
     }
 }
 
 void setSaturation(percent) {
     log.debug "Executing 'setSaturation'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setSaturation(this, percent)
+        parent.setSaturation(this, percent)
+        sendEvent(name: "saturation", value: percent, displayed: false)
     }
 }
 
 void setHue(percent) {
     log.debug "Executing 'setHue'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setHue(this, percent)
+        parent.setHue(this, percent)
+        sendEvent(name: "hue", value: percent, displayed: false)
     }
 }
 
 void setColor(value) {
+    log.debug "setColor: ${value}, $this"
     def events = []
     def validValues = [:]
 
     if (verifyPercent(value.hue)) {
+        events << createEvent(name: "hue", value: value.hue, displayed: false)
         validValues.hue = value.hue
     }
     if (verifyPercent(value.saturation)) {
+        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
         validValues.saturation = value.saturation
     }
     if (value.hex != null) {
         if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
+            events << createEvent(name: "color", value: value.hex)
             validValues.hex = value.hex
         } else {
             log.warn "$value.hex is not a valid color"
         }
     }
     if (verifyPercent(value.level)) {
+        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
         validValues.level = value.level
     }
     if (value.switch == "off" || (value.level != null && value.level <= 0)) {
+        events << createEvent(name: "switch", value: "off")
         validValues.switch = "off"
     } else {
+        events << createEvent(name: "switch", value: "on")
         validValues.switch = "on"
     }
-    if (!validValues.isEmpty()) {
-	    log.trace parent.setColor(this, validValues)
+    if (!events.isEmpty()) {
+        parent.setColor(this, validValues)
+    }
+    events.each {
+        sendEvent(it)
     }
 }
 
 void reset() {
     log.debug "Executing 'reset'"
-	setColorTemperature(4000)
+    def value = [level:100, saturation:56, hue:23]
+    setAdjustedColor(value)
+    parent.poll()
 }
 
 void setAdjustedColor(value) {
     if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
+        adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
         adjusted.level = null
-	    setColor(adjusted)
+        setColor(adjusted)
     } else {
-        log.warn "Invalid color input $value"
+        log.warn "Invalid color input"
     }
 }
 
 void setColorTemperature(value) {
     if (value) {
         log.trace "setColorTemperature: ${value}k"
-	    log.trace parent.setColorTemperature(this, value)
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+        sendEvent(name: "switch", value: "on")
     } else {
-        log.warn "Invalid color temperature $value"
+        log.warn "Invalid color temperature"
     }
 }
 
@@ -172,6 +207,23 @@ void refresh() {
     parent.manualRefresh()
 }
 
+def adjustOutgoingHue(percent) {
+	def adjusted = percent
+	if (percent > 31) {
+		if (percent < 63.0) {
+			adjusted = percent + (7 * (percent -30 ) / 32)
+		}
+		else if (percent < 73.0) {
+			adjusted = 69 + (5 * (percent - 62) / 10)
+		}
+		else {
+			adjusted = percent + (2 * (100 - percent) / 28)
+		}
+	}
+	log.info "percent: $percent, adjusted: $adjusted"
+	adjusted
+}
+
 def verifyPercent(percent) {
     if (percent == null)
         return false

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -33,6 +33,9 @@ metadata {
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
               attributeState "level", action:"switch level.setLevel", range:"(0..100)"
             }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
+			}
         }
 
         controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
@@ -68,16 +71,20 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
+	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
+	sendEvent(name: "switch", value: "off")
 }
 
 void setLevel(percent) {
 	log.debug "Executing 'setLevel'"
     if (percent != null && percent >= 0 && percent <= 100) {
 		parent.setLevel(this, percent)
+		sendEvent(name: "level", value: percent)
+		sendEvent(name: "switch", value: "on")
 	} else {
     	log.warn "$percent is not 0-100"
     }

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -1,103 +0,0 @@
-/**
- *  Hue White Ambiance Bulb
- *
- *  Philips Hue Type "Color Temperature Light"
- *
- *  Author: SmartThings
- */
-
-// for the UI
-metadata {
-    // Automatically generated. Make future change here.
-    definition (name: "Hue White Ambiance Bulb", namespace: "smartthings", author: "SmartThings") {
-        capability "Switch Level"
-        capability "Actuator"
-        capability "Color Temperature"
-        capability "Switch"
-        capability "Refresh"
-
-        command "refresh"
-    }
-
-    simulator {
-        // TODO: define status and reply messages here
-    }
-
-    tiles (scale: 2){
-        multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel", range:"(0..100)"
-            }
-        }
-
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2200..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: 'WHITES'
-        }
-
-        standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        main(["rich-control"])
-        details(["rich-control", "colorTempSliderControl", "colorTemp", "refresh"])
-    }
-}
-
-// parse events into attributes
-def parse(description) {
-    log.debug "parse() - $description"
-    def results = []
-
-    def map = description
-    if (description instanceof String)  {
-        log.debug "Hue Ambience Bulb stringToMap - ${map}"
-        map = stringToMap(description)
-    }
-
-    if (map?.name && map?.value) {
-        results << createEvent(name: "${map?.name}", value: "${map?.value}")
-    }
-    results
-}
-
-// handle commands
-void on() {
-    log.trace parent.on(this)
-}
-
-void off() {
-    log.trace parent.off(this)
-}
-
-void setLevel(percent) {
-    log.debug "Executing 'setLevel'"
-    if (percent != null && percent >= 0 && percent <= 100) {
-        log.trace parent.setLevel(this, percent)
-    } else {
-        log.warn "$percent is not 0-100"
-    }
-}
-
-void setColorTemperature(value) {
-    if (value) {
-        log.trace "setColorTemperature: ${value}k"
-        log.trace parent.setColorTemperature(this, value)
-    } else {
-        log.warn "Invalid color temperature"
-    }
-}
-
-void refresh() {
-    log.debug "Executing 'refresh'"
-    parent.manualRefresh()
-}

devicetypes/smartthings/mobile-presence.src/i18n/messages.properties

@@ -1,3 +1,4 @@
+#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
@@ -11,6 +12,15 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
 #  License for the specific language governing permissions and limitations 
 #  under the License.
+#==============================================================================
+# Purpose: Mobile Presence i18n Translation File
+#
+# Filename: mobile-presence.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160205 TW Initial release with informal Korean translation.
+#	2. 20160224 TW Updated with formal Korean translation.
+#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Give your device a name'''.ko=기기 이름 설정

devicetypes/smartthings/mobile-presence.src/mobile-presence.groovy

@@ -1,4 +1,5 @@
 /*
+===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,6 +13,14 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
  *  License for the specific language governing permissions and limitations 
  *  under the License.
+===============================================================================
+ *  Purpose: Mobile Presence DTH File
+ *
+ *  Filename: mobile-presence.src/mobile-presence.groovy
+ *
+ *  Change History:
+ *  1. 20160205 TW - Update/Edit to support i18n translations
+===============================================================================
  */
  
 metadata {

devicetypes/smartthings/osram-lightify-led-tunable-white-60w.src/osram-lightify-led-tunable-white-60w.groovy

@@ -19,6 +19,11 @@ metadata {
         capability "Sensor"
 
         attribute "colorName", "string"
+
+        // indicates that device keeps track of heartbeat (in state.heartbeat)
+        attribute "heartbeat", "string"
+        
+
     }
 
     // simulator metadata
@@ -70,6 +75,9 @@ metadata {
 def parse(String description) {
     //log.trace description
 
+    // save heartbeat (i.e. last time we got a message from device)
+    state.heartbeat = Calendar.getInstance().getTimeInMillis()
+
     if (description?.startsWith("catchall:")) {
         if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
         {
@@ -124,6 +132,7 @@ def off() {
 }
 
 def refresh() {
+    sendEvent(name: "heartbeat", value: "alive", displayed:false)
     [
             "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
             "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",

devicetypes/smartthings/smartpower-outlet.src/i18n/messages.properties

@@ -1,3 +1,4 @@
+#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -11,6 +12,14 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
+#==============================================================================
+# Purpose: SmartPower Outlet i18n Translation File
+#
+# Filename: SmartPower-Outlet.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160116 TW Initial release with informal Korean translation.
+#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Give your device a name'''.ko=기기 이름 설정

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -1,4 +1,5 @@
 /*
+===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,11 +13,18 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
+===============================================================================
+ *  Purpose: SmartPower Outlet DTH File
+ *
+ *  Filename: SmartPower-Outlet.src/SmartPower-Outlet.groovy
+ *
+ *  Change History:
+ *  1. 20160117 TW - Update/Edit to support i18n translations
+===============================================================================
  */
-
 metadata {
 	// Automatically generated. Make future change here.
-	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings", category: "C1") {
+	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"
@@ -25,6 +33,9 @@ metadata {
 		capability "Sensor"
 		capability "Health Check"
 
+		// indicates that device keeps track of heartbeat (in state.heartbeat)
+		attribute "heartbeat", "string"
+
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "4257050-RZHAC", deviceJoinName: "Outlet"
@@ -78,6 +89,9 @@ metadata {
 def parse(String description) {
 	log.debug "description is $description"
 
+	// save heartbeat (i.e. last time we got a message from device)
+	state.heartbeat = Calendar.getInstance().getTimeInMillis()
+
 	def finalResult = zigbee.getKnownDescription(description)
 
 	//TODO: Remove this after getKnownDescription can parse it automatically
@@ -118,11 +132,11 @@ def on() {
 }
 
 def refresh() {
+	sendEvent(name: "heartbeat", value: "alive", displayed:false)
 	zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 1200, displayed: false)
 	zigbee.onOffConfig() + powerConfig() + refresh()
 }
 

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -1,3 +1,4 @@
+#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -11,6 +12,14 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
+#==============================================================================
+# Purpose: SmartSense Moisture Sensor i18n Translation File
+#
+# Filename: SmartSense-Moisture-Sensor.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160116 TW Initial release with formal Korean translation.
+#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Dry'''.ko=건조

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -1,4 +1,5 @@
 /*
+===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,17 +13,25 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
+===============================================================================
+ *  Purpose: SmartSense Moisture Sensor DTH File
+ *
+ *  Filename: SmartSense-Moisture-Sensor.src/SmartSense-Moisture-Sensor.groovy
+ *
+ *  Change History:
+ *  1. 20160116 TW - Update/Edit to support i18n translations
+ *  2. 20160125 TW = Incorporated new battery mapping from TM
+===============================================================================
  */
 
 metadata {
-	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
 		capability "Health Check"
-		capability "Sensor"		
 
 		command "enrollResponse"
 
@@ -256,8 +265,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				result.value = Math.min(100, roundedPct)
+				result.value = Math.min(100, (int) pct * 100)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -313,8 +321,6 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [

devicetypes/smartthings/smartsense-motion-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -1,30 +0,0 @@
-# Smartsense Motion Sensor
-
-
-
-Works with: 
-
-* [Samsung SmartThings Motion Sensor](https://shop.smartthings.com/#!/products/samsung-smartthings-motion-sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health]($health)
-
-## Capabilities
-
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Motion Sensor** - can detect motion
-* **Battery** - defines device uses a battery
-* **Refresh** - _refresh()_ command for status updates
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-A Category C2 motion sensor that has 120min check-in interval
-
-
-
-
-
-

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -1,3 +1,4 @@
+#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -11,6 +12,15 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
+#==============================================================================
+# Purpose: SmartSense Motion Sensor i18n Translation File
+#
+# Filename: SmartSense-Motion-Sensor.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160116 TW Initial release with formal Korean translation.
+#	2. 20160224 TW Updated formal Korean translations from Mike Stoller.
+#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''battery'''.ko=배터리

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -1,4 +1,5 @@
 /*
+===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,17 +13,25 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
+===============================================================================
+ *  Purpose: SmartSense Motion Sensor DTH File
+ *
+ *  Filename: SmartSense-Motion-Sensor.src/SmartSense-Motion-Sensor.groovy
+ *
+ *  Change History:
+ *  1. 20160116 TW - Update/Edit to support i18n translations
+ *  2. 20160125 TW = Incorporated new battery mapping from TM
+===============================================================================
  */
 
 metadata {
-	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
 		capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Health Check"
-		capability "Sensor"		
 
 		command "enrollResponse"
 
@@ -272,8 +281,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				result.value = Math.min(100, roundedPct)
+				result.value = Math.min(100, (int) pct * 100)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -325,8 +333,6 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -24,7 +24,7 @@ metadata {
         capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Sensor"
-
+        
         command "enrollResponse"
 
 	}
@@ -73,7 +73,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -87,10 +87,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
 	    map = parseIasMessage(description)
     }
-
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
+    
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -128,7 +128,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -141,7 +141,7 @@ private Map parseReportAttributeMessage(String description) {
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,11 +153,11 @@ private Map parseReportAttributeMessage(String description) {
     else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
     	def value = descMap.value.endsWith("01") ? "active" : "inactive"
     	resultMap = getMotionResult(value)
-    }
-
+    } 
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -170,7 +170,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-
+    
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -240,8 +240,7 @@ private Map getBatteryResult(rawValue) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			result.value = Math.min(100, roundedPct)
+			result.value = Math.min(100, (int) pct * 100)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 	}

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -1,3 +1,4 @@
+#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -11,6 +12,14 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
+#==============================================================================
+# Purpose: SmartSense Multi Sensor i18n Translation File
+#
+# Filename: SmartSense-Multi-Sensor.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160117 TW Initial release with informal Korean translation.
+#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Yes'''.ko=예

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -1,4 +1,5 @@
 /*
+===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,10 +13,19 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
+===============================================================================
+ *  Purpose: SmartSense Multi Sensor DTH File
+ *
+ *  Filename: SmartSense-Multi-Sensor.src/SmartSense-Multi-Sensor.groovy
+ *
+ *  Change History:
+ *  1. 20160117 TW - Update/Edit to support i18n translations
+ *  2. 20160125 TW = Incorporated new battery mapping from TM
+===============================================================================
  */
 
 metadata {
-	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
 
 		capability "Three Axis"
 		capability "Battery"
@@ -338,8 +348,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				result.value = Math.min(100, roundedPct)
+				result.value = Math.min(100, (int) pct * 100)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -404,37 +413,76 @@ def refresh() {
 
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		log.debug "Refreshing Values for manufacturer: SmartThings "
-		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
-            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
-            Separating these out in a separate if-else because I do not want to touch Centralite part
-            as of now.
-        */
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
+		refreshCmds = refreshCmds + [
+			/* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
+				seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
+				Separating these out in a separate if-else because I do not want to touch Centralite part
+				as of now.
+			*/
+
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 0 0x20 {01}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+		]
 	} else {
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
+		refreshCmds = refreshCmds + [
+			/* sensitivity - default value (8) */
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 0 0x20 {02}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+		]
 	}
 
 	//Common refresh commands
-	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
-			zigbee.readAttribute(0x0001, 0x0020) +
-			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
+	refreshCmds = refreshCmds + [
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global read 0xFC02 0x0010",
+		"send 0x${device.deviceNetworkId} 1 1","delay 400"
+	]
 
 	return refreshCmds + enrollResponse()
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting"
 
-	def configCmds = enrollResponse() +
-			zigbee.batteryConfig() +
-			zigbee.temperatureConfig() +
-			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
+	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+		]
 
 	return configCmds + refresh()
 }

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -16,7 +16,7 @@
 //DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
 
  metadata {
- 	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+ 	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings") {
  		capability "Battery"
  		capability "Configuration"
  		capability "Contact Sensor"
@@ -24,7 +24,6 @@
  		capability "Refresh"
  		capability "Temperature Measurement"
 		capability "Health Check"
-		capability "Sensor"
 
 		command "enrollResponse"
  	}
@@ -235,8 +234,7 @@ def getTemperature(value) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			result.value = Math.min(100, roundedPct)
+			result.value = Math.min(100, (int) pct * 100)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 
@@ -302,7 +300,6 @@ def getTemperature(value) {
 	}
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -13,34 +13,32 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
+ 
 metadata {
-	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-		capability "Health Check"
-		capability "Sensor"
-
+        
 		command "enrollResponse"
-
-
+ 
+ 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
 	}
-
+ 
 	simulator {
-
+ 
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
-
+ 
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
@@ -73,10 +71,10 @@ metadata {
 		details(["contact","temperature","battery","refresh"])
 	}
 }
-
+ 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -90,10 +88,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
-
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
+    
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -101,7 +99,7 @@ def parse(String description) {
     }
     return result
 }
-
+ 
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -127,7 +125,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -137,14 +135,14 @@ private boolean shouldProcessMessage(cluster) {
 private int getHumidity(value) {
     return Math.round(Double.parseDouble(value))
 }
-
+ 
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,10 +151,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -169,7 +167,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-
+    
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -202,7 +200,7 @@ private Map parseIasMessage(String description) {
     }
     return resultMap
 }
-
+ 
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -215,11 +213,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-
+    
     def result = [
     	name: 'battery'
     ]
-
+    
 	def volts = rawValue / 10
 	def descriptionText
     if (rawValue == 0 || rawValue == 255) {}
@@ -230,8 +228,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		result.value = Math.min(100, roundedPct)
+		result.value = Math.min(100, (int) pct * 100)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -276,7 +273,6 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -14,14 +14,13 @@
  *
  */
 metadata {
-	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Relative Humidity Measurement"
 		capability "Health Check"
-		capability "Sensor"
 
 		fingerprint endpointId: "01", inClusters: "0001,0003,0020,0402,0B05,FC45", outClusters: "0019,0003"
 	}
@@ -206,8 +205,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		result.value = Math.min(100, roundedPct)
+		result.value = Math.min(100, (int) pct * 100)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -254,7 +252,6 @@ def refresh()
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [

devicetypes/smartthings/testing/simulated-alarm.src/simulated-alarm.groovy

@@ -16,8 +16,6 @@
 metadata {
 	definition (name: "Simulated Alarm", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Alarm"
-		capability "Sensor"
-		capability "Actuator"
 	}
 
 	simulator {

devicetypes/smartthings/testing/simulated-color-control.src/simulated-color-control.groovy

@@ -1,8 +1,6 @@
 metadata {
 	definition (name: "Simulated Color Control", namespace: "smartthings/testing", author: "SmartThings") {
     	capability "Color Control"
-		capability "Sensor"
-		capability "Actuator"
 	}
 
 	simulator {

devicetypes/smartthings/testing/simulated-contact-sensor.src/simulated-contact-sensor.groovy

@@ -15,7 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Contact Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Contact Sensor"
-		capability "Sensor"
 
 		command "open"
 		command "close"

devicetypes/smartthings/testing/simulated-lock.src/simulated-lock.groovy

@@ -15,8 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Lock", namespace: "smartthings/testing", author: "bob") {
 		capability "Lock"
-		capability "Sensor"
-		capability "Actuator"
 	}
 
 	// Simulated lock

devicetypes/smartthings/testing/simulated-motion-sensor.src/simulated-motion-sensor.groovy

@@ -15,7 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Motion Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Motion Sensor"
-		capability "Sensor"
 
 		command "active"
 		command "inactive"

devicetypes/smartthings/testing/simulated-presence-sensor.src/simulated-presence-sensor.groovy

@@ -15,7 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Presence Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Presence Sensor"
-		capability "Sensor"
 
 		command "arrived"
 		command "departed"

devicetypes/smartthings/testing/simulated-switch.src/simulated-switch.groovy

@@ -16,8 +16,6 @@ metadata {
     definition (name: "Simulated Switch", namespace: "smartthings/testing", author: "bob") {
 		capability "Switch"
         capability "Relay Switch"
-		capability "Sensor"
-		capability "Actuator"
 
 		command "onPhysical"
 		command "offPhysical"

devicetypes/smartthings/testing/simulated-temperature-sensor.src/simulated-temperature-sensor.groovy

@@ -16,7 +16,6 @@ metadata {
 	definition (name: "Simulated Temperature Sensor", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Temperature Measurement"
 		capability "Switch Level"
-		capability "Sensor"
 
 		command "up"
 		command "down"

devicetypes/smartthings/testing/simulated-thermostat.src/simulated-thermostat.groovy

@@ -16,8 +16,6 @@ metadata {
 	definition (name: "Simulated Thermostat", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Thermostat"
 		capability "Relative Humidity Measurement"
-		capability "Sensor"
-		capability "Actuator"
 
 		command "tempUp"
 		command "tempDown"

devicetypes/smartthings/testing/simulated-water-sensor.src/simulated-water-sensor.groovy

@@ -15,7 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Water Sensor", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Water Sensor"
-		capability "Sensor"
         
         command "wet"
         command "dry"

devicetypes/smartthings/tile-ux/README.md

@@ -1,42 +0,0 @@
-# Device Tiles Examples and Reference
-
-This package contains examples of Device tiles, organized by tile type.
-
-## Purpose
-
-Each Device Handler shows example usages of a specific tile, and is meant to represent the variety of permutations that a tile can be configured.
-
-The various tiles can be used by QA to test tiles on all supported mobile devices, and by developers as a reference implementation.
-
-## Installation
-
-1. Self-publish the Device Handlers in this package.
-2. Self-publish the Device Tile Controller SmartApp. The SmartApp can be found [here](https://github.com/SmartThingsCommunity/SmartThingsPublic/blob/master/smartapps/smartthings/tile-ux/device-tile-controller.src/device-tile-controller.groovy).
-3. Install the SmartApp from the Marketplace, under "My Apps".
-4. Select the simulated devices you want to install and press "Done".
-
-The simulated devices can then be found in the "Things" view of "My Home" in the mobile app.
-You may wish to create a new room for these simulated devices for easy access.
-
-## Usage
-
-Each simulated device can be interacted with like other devices.
-You can use the mobile app to interact with the tiles to see how they look and behave.
-
-## Troubleshooting
-
-If you get an error when installing the simulated devices using the controller SmartApp, ensure that you have published all the Device Handlers for yourself.
-Also check live logging to see if there is a specific tile that is causing installation issues.
-
-## FAQ
-
-*Question: A tile isn't behaving as expected. What should I do?*
-
-QA should create a JIRA ticket for any issues or inconsistencies of tiles across devices.
-
-Developers may file a support ticket, and reference the specific tile and issue observed.
-
-*Question: I'd like to contribute an example tile usage that would be helpful for testing and reference purposes. Can I do that?*
-
-We recommend that you open an issue in the SmartThingsPublic repository describing the example tile and usage.
-That way we can discuss with you the proposed change, and then if appropriate you can create a PR associated to the issue.

devicetypes/smartthings/tile-ux/tile-basic-colorwheel.src/tile-basic-colorwheel.groovy

@@ -22,7 +22,7 @@ metadata {
 
 	tiles(scale: 2) {
 		valueTile("currentColor", "device.color") {
-			state "color", label: '${currentValue}', defaultState: true
+			state "default", label: '${currentValue}'
 		}
 
 		controlTile("rgbSelector", "device.color", "color", height: 6, width: 6, inactiveLabel: false) {
@@ -41,13 +41,6 @@ def parse(String description) {
 	log.debug "Parsing '${description}'"
 }
 
-def setColor(value) {
-	log.debug "setting color: $value"
-    if (value.hex) { sendEvent(name: "color", value: value.hex) }
-    if (value.hue) { sendEvent(name: "hue", value: value.hue) }
-    if (value.saturation) { sendEvent(name: "saturation", value: value.saturation) }
-}
-
 def setSaturation(percent) {
 	log.debug "Executing 'setSaturation'"
 	sendEvent(name: "saturation", value: percent)

devicetypes/smartthings/tile-ux/tile-basic-slider.src/tile-basic-slider.groovy

@@ -39,7 +39,7 @@ metadata {
 		}
 
 		valueTile("rangeValue", "device.rangedLevel", height: 2, width: 2) {
-			state "range", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}
 
 		controlTile("rangeSliderConstrained", "device.rangedLevel", "slider", height: 2, width: 4, range: "(40..60)") {

devicetypes/smartthings/tile-ux/tile-basic-standard.src/tile-basic-standard.groovy

@@ -41,17 +41,17 @@ metadata {
 
 		// standard flat tile with only a label
 		standardTile("flatLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
-			state "label", label: 'On Action', action: "switch.on", backgroundColor: "#ffffff", defaultState: true
+			state "default", label: 'On Action', action: "switch.on", backgroundColor: "#ffffff"
 		}
 
 		// standard flat tile with icon and label
 		standardTile("flatIconLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
-			state "iconLabel", label: 'Off Action', action: "switch.off", icon:"st.switches.switch.off", backgroundColor: "#ffffff", defaultState: true
+			state "default", label: 'Off Action', action: "switch.off", icon:"st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 
 		// standard flat tile with only icon (Refreh text is IN the icon file)
 		standardTile("flatIcon", "device.switch", width: 2, height: 2, decoration: "flat") {
-			state "icon", action:"refresh.refresh", icon:"st.secondary.refresh", defaultState: true
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
 		// standard with defaultState = true
@@ -74,19 +74,19 @@ metadata {
 
 		// utility tiles to fill the spaces
 		standardTile("empty2x2", "null", width: 2, height: 2, decoration: "flat") {
-			state "emptySmall", label:'', defaultState: true
+			state "default", label:''
 		}
 		standardTile("empty4x2", "null", width: 4, height: 2, decoration: "flat") {
-			state "emptyBigger", label:'', defaultState: true
+			state "default", label:''
 		}
 
 		// multi-line text (explicit newlines)
 		standardTile("multiLine", "device.multiLine", width: 2, height: 2) {
-			state "multiLine", label: '${currentValue}', defaultState: true
+			state "default", label: '${currentValue}'
 		}
 
 		standardTile("multiLineWithIcon", "device.multiLine", width: 2, height: 2) {
-			state "multiLineIcon", label: '${currentValue}', icon: "st.switches.switch.off", defaultState: true
+			state "default", label: '${currentValue}', icon: "st.switches.switch.off"
 		}
 
 		main("actionRings")

devicetypes/smartthings/tile-ux/tile-basic-value.src/tile-basic-value.groovy

@@ -22,68 +22,68 @@ metadata {
 
 	tiles(scale: 2) {
 		valueTile("text", "device.text", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}
 
 		valueTile("longText", "device.longText", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}
 
 		valueTile("integer", "device.integer", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}
 
 		valueTile("integerFloat", "device.integerFloat", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}
 
 		valueTile("pi", "device.pi", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}
 
 		valueTile("floatAsText", "device.floatAsText", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}
 
 		valueTile("bgColor", "device.integer", width: 2, height: 2) {
-			state "val", label:'${currentValue}', backgroundColor: "#e86d13", defaultState: true
+			state "default", label:'${currentValue}', backgroundColor: "#e86d13"
 		}
 
 		valueTile("bgColorRange", "device.integer", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true, backgroundColors: [
+			state "default", label:'${currentValue}', backgroundColors: [
 				[value: 10, color: "#ff0000"],
 				[value: 90, color: "#0000ff"]
 			]
 		}
 
 		valueTile("bgColorRangeSingleItem", "device.integer", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true, backgroundColors: [
+			state "default", label:'${currentValue}', backgroundColors: [
 				[value: 10, color: "#333333"]
 			]
 		}
 
 		valueTile("bgColorRangeConflict", "device.integer", width: 2, height: 2) {
-			state "valWithConflict", label:'${currentValue}', defaultState: true, backgroundColors: [
+			state "default", label:'${currentValue}', backgroundColors: [
 				[value: 10, color: "#990000"],
 				[value: 10, color: "#000099"]
 			]
 		}
 
 		valueTile("noValue", "device.nada", width: 4, height: 2) {
-			state "noval", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}
 
 		valueTile("multiLine", "device.multiLine", width: 3, height: 2) {
-			state "val", label: '${currentValue}', defaultState: true
+			state "default", label: '${currentValue}'
 		}
 
 		valueTile("multiLineWithIcon", "device.multiLine", width: 3, height: 2) {
-			state "val", label: '${currentValue}', icon: "st.switches.switch.off", defaultState: true
+			state "default", label: '${currentValue}', icon: "st.switches.switch.off"
 		}
 
 		main("text")
 		details([
-			"text", "longText", "integer",
+			"text", "longText", "integer", 
             "integerFloat", "pi", "floatAsText",
             "bgColor", "bgColorRange", "bgColorRangeSingleItem",
             "bgColorRangeConflict", "noValue",

devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy

@@ -39,15 +39,15 @@ metadata {
 				attributeState "turningOff", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute("device.level", key: "SECONDARY_CONTROL") {
-				attributeState "level", icon: 'st.Weather.weather1', action:"randomizeLevel", defaultState: true
+				attributeState "default", icon: 'st.Weather.weather1', action:"randomizeLevel"
 			}
 			tileAttribute("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel", defaultState: true
+				attributeState "default", action:"switch level.setLevel"
 			}
 		}
 		multiAttributeTile(name:"valueTile", type:"generic", width:6, height:4) {
 			tileAttribute("device.level", key: "PRIMARY_CONTROL") {
-				attributeState "level", label:'${currentValue}', defaultState: true, backgroundColors:[
+				attributeState "default", label:'${currentValue}', backgroundColors:[
 					[value: 0, color: "#ff0000"],
 					[value: 20, color: "#ffff00"],
 					[value: 40, color: "#00ff00"],
@@ -69,34 +69,34 @@ metadata {
 		}
 		multiAttributeTile(name:"lengthyTile", type:"generic", width:6, height:4) {
 			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
-				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", defaultState: true
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821"
 			}
 			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
-				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", defaultState: true
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821"
 			}
 		}
 		multiAttributeTile(name:"multilineTile", type:"generic", width:6, height:4) {
 			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
-				attributeState "multiLineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", defaultState: true
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821"
 			}
 			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
-				attributeState "multiLineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", defaultState: true
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821"
 			}
 		}
 		multiAttributeTile(name:"lengthyTileWithIcon", type:"generic", width:6, height:4) {
 			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
-				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on"
 			}
 			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
-				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on"
 			}
 		}
 		multiAttributeTile(name:"multilineTileWithIcon", type:"generic", width:6, height:4) {
 			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
-				attributeState "multilineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on"
 			}
 			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
-				attributeState "multilineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on"
 			}
 		}
 
@@ -110,7 +110,7 @@ def installed() {
 	sendEvent(name: "multilineText", value: "Line 1 YES\nLine 2 YES\nLine 3 NO")
 }
 
-def parse(String description) {
+def parse() {
 	// This is a simulated device. No incoming data to parse.
 }
 

devicetypes/smartthings/tile-ux/tile-multiattribute-lighting.src/tile-multiattribute-lighting.groovy

@@ -96,10 +96,10 @@ metadata {
 		}
 
 		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "reset", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single", defaultState: true
+			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "refresh", label:"", action:"refresh.refresh", icon:"st.secondary.refresh", defaultState: true
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
 		main(["switch"])
@@ -173,6 +173,7 @@ def setColor(value) {
 def reset() {
 	log.debug "Executing 'reset'"
 	setAdjustedColor([level:100, hex:"#90C638", saturation:56, hue:23])
+	//parent.poll()
 }
 
 def setAdjustedColor(value) {
@@ -188,6 +189,7 @@ def setAdjustedColor(value) {
 
 def refresh() {
 	log.debug "Executing 'refresh'"
+	//parent.manualRefresh()
 }
 
 def adjustOutgoingHue(percent) {
@@ -206,3 +208,4 @@ def adjustOutgoingHue(percent) {
 	log.info "percent: $percent, adjusted: $adjusted"
 	adjusted
 }
+

devicetypes/smartthings/tile-ux/tile-multiattribute-mediaplayer.src/tile-multiattribute-mediaplayer.groovy

@@ -37,10 +37,10 @@ metadata {
 				attributeState("stopped", label:"Stopped", action:"music Player.play", nextState: "playing")
 			}
 			tileAttribute("device.status", key: "PREVIOUS_TRACK") {
-				attributeState("status", action:"music Player.previousTrack", defaultState: true)
+				attributeState("default", action:"music Player.previousTrack")
 			}
 			tileAttribute("device.status", key: "NEXT_TRACK") {
-				attributeState("status", action:"music Player.nextTrack", defaultState: true)
+				attributeState("default", action:"music Player.nextTrack")
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState("level", action:"music Player.setLevel")
@@ -50,7 +50,7 @@ metadata {
 				attributeState("muted", action:"music Player.unmute", nextState: "unmuted")
 			}
 			tileAttribute("device.trackDescription", key: "MARQUEE") {
-				attributeState("trackDescription", label:"${currentValue}", defaultState: true)
+				attributeState("default", label:"${currentValue}")
 			}
 		}
 

devicetypes/smartthings/tile-ux/tile-multiattribute-thermostat.src/tile-multiattribute-thermostat.groovy

@@ -32,14 +32,14 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"thermostatFull", type:"thermostat", width:6, height:4) {
 			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState("temp", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
 				attributeState("VALUE_UP", action: "tempUp")
 				attributeState("VALUE_DOWN", action: "tempDown")
 			}
 			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
-				attributeState("humidity", label:'${currentValue}%', unit:"%", defaultState: true)
+				attributeState("default", label:'${currentValue}%', unit:"%")
 			}
 			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
 				attributeState("idle", backgroundColor:"#44b621")
@@ -53,16 +53,15 @@ metadata {
 				attributeState("auto", label:'${name}')
 			}
 			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
-				attributeState("heatingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
-				attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 		}
 		multiAttributeTile(name:"thermostatNoHumidity", type:"thermostat", width:6, height:4) {
 			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-                attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
-				attributeState("temp", label:'${currentValue}', unit:"dF")
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
 				attributeState("VALUE_UP", action: "tempUp")
@@ -80,16 +79,15 @@ metadata {
 				attributeState("auto", label:'${name}')
 			}
 			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
-                attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
-				attributeState("heatingSetpoint", label:'${currentValue}', unit:"dF")
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
-				attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 		}
 		multiAttributeTile(name:"thermostatBasic", type:"thermostat", width:6, height:4) {
 			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState("temp", label:'${currentValue}', unit:"dF", defaultState: true,
+				attributeState("default", label:'${currentValue}', unit:"dF",
 				backgroundColors:[
 					[value: 31, color: "#153591"],
 					[value: 44, color: "#1e9cbb"],
@@ -120,30 +118,30 @@ metadata {
 			)
 		}
 		standardTile("tempDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "tempDown", label:'down', action:"tempDown", defaultState: true
+			state "default", label:'down', action:"tempDown"
 		}
 		standardTile("tempUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "tempUp", label:'up', action:"tempUp", defaultState: true
+			state "default", label:'up', action:"tempUp"
 		}
 
 		valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "heat", label:'${currentValue} heat', unit: "F", backgroundColor:"#ffffff"
 		}
 		standardTile("heatDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "heatDown", label:'down', action:"heatDown", defaultState: true
+			state "default", label:'down', action:"heatDown"
 		}
 		standardTile("heatUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "heatUp", label:'up', action:"heatUp", defaultState: true
+			state "default", label:'up', action:"heatUp"
 		}
 
 		valueTile("coolingSetpoint", "device.coolingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "cool", label:'${currentValue} cool', unit:"F", backgroundColor:"#ffffff"
 		}
 		standardTile("coolDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "coolDown", label:'down', action:"coolDown", defaultState: true
+			state "default", label:'down', action:"coolDown"
 		}
 		standardTile("coolUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "coolUp", label:'up', action:"coolUp", defaultState: true
+			state "default", label:'up', action:"coolUp"
 		}
 
 		standardTile("mode", "device.thermostatMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -13,7 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
+ 
 metadata {
 	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
@@ -21,28 +21,28 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-
+        
 		command "enrollResponse"
-
-
+ 
+ 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Visonic", model: "MCT-340 SMA"
 	}
-
+ 
 	simulator {
-
+ 
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
-
+ 
 	tiles {
     	standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
 			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
-
+    	
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
@@ -58,23 +58,23 @@ metadata {
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-
+        
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-
+        
 		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
 			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
 		}
-
+ 
 		main (["contact", "temperature"])
 		details(["contact","temperature","battery","refresh","configure"])
 	}
 }
-
+ 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -88,10 +88,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
-
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
+    
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -99,7 +99,7 @@ def parse(String description) {
     }
     return result
 }
-
+ 
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -125,20 +125,20 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
-
+ 
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -147,10 +147,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -163,7 +163,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-
+    
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -196,7 +196,7 @@ private Map parseIasMessage(String description) {
     }
     return resultMap
 }
-
+ 
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -209,11 +209,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-
+    
     def result = [
     	name: 'battery'
     ]
-
+    
 	def volts = rawValue / 10
 	def descriptionText
 	if (volts > 3.5) {
@@ -223,8 +223,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		result.value = Math.min(100, roundedPct)
+		result.value = Math.min(100, (int) pct * 100)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -262,7 +261,7 @@ def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
 	[
-
+    
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
@@ -275,24 +274,24 @@ def configure() {
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
     	"delay 1000",
-
+        
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
+        
         "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
+        
         "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-
+        
+        
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-
+        
+        
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
 		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
-
+        
         "delay 500"
 	]
     return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
@@ -300,11 +299,11 @@ def configure() {
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [
-
+    [	
+    	
 	"raw 0x500 {01 23 00 00 00}", "delay 200",
     "send 0x${device.deviceNetworkId} 1 1"
-
+        
     ]
 }
 private hex(value) {

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -1,7 +1,8 @@
 /**
- *  ZigBee Button
+ *  Iris Smart Fob
  *
  *  Copyright 2015 Mitch Pond
+ *	Presence code adapted from SmartThings Arrival Sensor HA device type
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -13,235 +14,181 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
 metadata {
-    definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
-        capability "Actuator"
-        capability "Battery"
-        capability "Button"
+	definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
+		capability "Battery"
+		capability "Button"
         capability "Configuration"
-        capability "Refresh"
-        capability "Sensor"
-
-        command "enrollResponse"
-
-        fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
-        //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
-        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
-        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
+		capability "Presence Sensor"
+		capability "Sensor"
+        
+		//fingerprint endpointId: "01", profileId: "0104", inClusters: "0000,0001,0003,0007,0020,0B05", outClusters: "0003,0006,0019", model:"3450-L", manufacturer: "CentraLite"
+	}
+    
+    preferences{
+	    input ("holdTime", "number", title: "Minimum time in seconds for a press to count as \"held\"",
+    		defaultValue: 3, displayDuringSetup: false)
+        input "checkInterval", "enum", title: "Presence timeout (minutes)",
+            defaultValue:"2", options: ["2", "3", "5"], displayDuringSetup: false
+        input "logging", "bool", title: "Enable debug logging",
+            defaultValue: false, displayDuringSetup: false
     }
 
-    simulator {}
-
-    preferences {
-        section {
-            input ("holdTime", "number", title: "Minimum time in seconds for a press to count as \"held\"", defaultValue: 1, displayDuringSetup: false)
+	tiles(scale: 2) {
+    	standardTile("presence", "device.presence", width: 4, height: 4, canChangeBackground: true) {
+            state "present", label: "Present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
+            state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
         }
-    }
-
-    tiles {
-        standardTile("button", "device.button", width: 2, height: 2) {
-            state "default", label: "", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
-            state "button 1 pushed", label: "pushed #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#79b821"
+    	standardTile("button", "device.button", decoration: "flat", width: 2, height: 2) {
+        	state "default", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
         }
+		valueTile("battery", "device.battery", decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
 
-        valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
-            state "battery", label:'${currentValue}% battery', unit:""
-        }
-
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
-            state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-        main (["button"])
-        details(["button", "battery", "refresh"])
-    }
+		main (["presence"])
+		details(["presence","button","battery"])
+	}
 }
 
 def parse(String description) {
-    log.debug "description is $description"
-    def event = zigbee.getEvent(description)
-    if (event) {
-        sendEvent(event)
-    }
-    else {
-        if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
-            def descMap = zigbee.parseDescriptionAsMap(description)
-            if (descMap.clusterInt == 0x0001 && descMap.attrInt == 0x0020) {
-                event = getBatteryResult(zigbee.convertHexToInt(descMap.value))
-            }
-            else if (descMap.clusterInt == 0x0006 || descMap.clusterInt == 0x0008) {
-                event = parseNonIasButtonMessage(descMap)
-            }
-        }
-        else if (description?.startsWith('zone status')) {
-            event = parseIasButtonMessage(description)
-        }
-
-        log.debug "Parse returned $event"
-        def result = event ? createEvent(event) : []
-
-        if (description?.startsWith('enroll request')) {
-            List cmds = enrollResponse()
-            result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-        }
-        return result
-    }
-}
-
-private Map parseIasButtonMessage(String description) {
-    int zoneInt = Integer.parseInt((description - "zone status 0x"), 16)
-    if (zoneInt & 0x02) {
-        resultMap = getButtonResult('press')
-    } else {
-        resultMap = getButtonResult('release')
-    }
-
-    return resultMap
-}
-
-private Map getBatteryResult(rawValue) {
-    log.debug 'Battery'
-    def volts = rawValue / 10
-    if (volts > 3.0 || volts == 0 || rawValue == 0xFF) {
-        return [:]
-    }
-    else {
-        def result = [
-                name: 'battery'
-        ]
-        def minVolts = 2.1
-        def maxVolts = 3.0
-        def pct = (volts - minVolts) / (maxVolts - minVolts)
-        result.value = Math.min(100, (int) pct * 100)
-        def linkText = getLinkText(device)
-        result.descriptionText = "${linkText} battery was ${result.value}%"
-        return result
-    }
-}
-
-private Map parseNonIasButtonMessage(Map descMap){
-    def buttonState = ""
-    def buttonNumber = 0
-    if (((device.getDataValue("model") == "3460-L") || (device.getDataValue("model") == "3450-L"))
-            &&(descMap.clusterInt == 0x0006)) {
-        if (descMap.command == "01") {
-            getButtonResult("press")
-        }
-        else if (descMap.command == "00") {
-            getButtonResult("release")
-        }
-    }
-    else if (descMap.clusterInt == 0x0006) {
-        buttonState = "pushed"
-        if (descMap.command == "01") {
-            buttonNumber = 1
-        }
-        else if (descMap.command == "00") {
-            buttonNumber = 2
-        }
-        if (buttonNumber !=0) {
-            def descriptionText = "$device.displayName button $buttonNumber was $buttonState"
-            return createEvent(name: "button", value: buttonState, data: [buttonNumber: buttonNumber], descriptionText: descriptionText, isStateChange: true)
-        }
-        else {
-            return [:]
-        }
-    }
-    else if (descMap.clusterInt == 0x0008) {
-        if (descMap.command == "05") {
-            state.buttonNumber = 1
-            getButtonResult("press", 1)
-        }
-        else if (descMap.command == "01") {
-            state.buttonNumber = 2
-            getButtonResult("press", 2)
-        }
-        else if (descMap.command == "03") {
-            getButtonResult("release", state.buttonNumber)
-        }
-    }
-}
-
-def refresh() {
-    log.debug "Refreshing Battery"
-
-    return zigbee.readAttribute(0x0001, 0x20) +
-            zigbee.enrollResponse()
-}
-
-def configure() {
-    log.debug "Configuring Reporting, IAS CIE, and Bindings."
-    def cmds = []
-    if (device.getDataValue("model") == "3450-L") {
-        cmds << [
-                "zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 300",
-                "zdo bind 0x${device.deviceNetworkId} 2 1 6 {${device.zigbeeId}} {}", "delay 300",
-                "zdo bind 0x${device.deviceNetworkId} 3 1 6 {${device.zigbeeId}} {}", "delay 300",
-                "zdo bind 0x${device.deviceNetworkId} 4 1 6 {${device.zigbeeId}} {}", "delay 300"
-        ]
-    }
-    return zigbee.onOffConfig() +
-            zigbee.levelConfig() +
-            zigbee.configureReporting(0x0001, 0x20, 0x20, 30, 21600, 0x01) +
-            zigbee.enrollResponse() +
-            zigbee.readAttribute(0x0001, 0x20) +
-            cmds
-
-}
-
-private Map getButtonResult(buttonState, buttonNumber = 1) {
-    if (buttonState == 'release') {
-        log.debug "Button was value : $buttonState"
-        def timeDiff = now() - state.pressTime
-        log.info "timeDiff: $timeDiff"
-        def holdPreference = holdTime ?: 1
-        log.info "holdp1 : $holdPreference"
-        holdPreference = (holdPreference as int) * 1000
-        log.info "holdp2 : $holdPreference"
-        if (timeDiff > 10000) {         //timeDiff>10sec check for refresh sending release value causing actions to be executed
-            return [:]
-        }
-        else {
-            if (timeDiff < holdPreference) {
-                buttonState = "pushed"
-            }
-            else {
-                buttonState = "held"
-            }
-            def descriptionText = "$device.displayName button $buttonNumber was $buttonState"
-            return createEvent(name: "button", value: buttonState, data: [buttonNumber: buttonNumber], descriptionText: descriptionText, isStateChange: true)
-        }
-    }
-    else if (buttonState == 'press') {
-        log.debug "Button was value : $buttonState"
-        state.pressTime = now()
-        log.info "presstime: ${state.pressTime}"
-        return [:]
-    }
-}
-
-def installed() {
-    initialize()
+    def descMap = zigbee.parseDescriptionAsMap(description)
+    logIt descMap
+    state.lastCheckin = now()
+    logIt "lastCheckin = ${state.lastCheckin}"
+    handlePresenceEvent(true)
+    
+	def results = []
+    if (description?.startsWith('catchall:'))
+		results = parseCatchAllMessage(descMap)
+	else if (description?.startsWith('read attr -'))
+		results = parseReportAttributeMessage(descMap)
+    else logIt(descMap, "trace")
+        
+	return results;
 }
 
 def updated() {
-    initialize()
+	startTimer()
+    configure()
 }
 
-def initialize() {
-    if ((device.getDataValue("manufacturer") == "OSRAM") && (device.getDataValue("model") == "LIGHTIFY Dimming Switch")) {
-        sendEvent(name: "numberOfButtons", value: 2)
-    }
-    else if ((device.getDataValue("manufacturer") == "CentraLite") &&
-            ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L"))) {
-        sendEvent(name: "numberOfButtons", value: 1)
-    }
-    else if ((device.getDataValue("manufacturer") == "CentraLite") && (device.getDataValue("model") == "3450-L")) {
-        sendEvent(name: "numberOfButtons", value: 4)
-    }
-    else {
-        //default. can be changed
-        sendEvent(name: "numberOfButtons", value: 4)
-    }
-
+def configure(){
+	logIt "Configuring Smart Fob..."
+	[
+	"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
+    "zdo bind 0x${device.deviceNetworkId} 2 1 6 {${device.zigbeeId}} {}", "delay 200",
+    "zdo bind 0x${device.deviceNetworkId} 3 1 6 {${device.zigbeeId}} {}", "delay 200",
+    "zdo bind 0x${device.deviceNetworkId} 4 1 6 {${device.zigbeeId}} {}", "delay 200",
+    "zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 200"
+    ] +
+    zigbee.configureReporting(0x0001,0x0020,0x20,20,20,0x01)
 }
+
+def parseCatchAllMessage(descMap) {
+    if (descMap?.clusterId == "0006" && descMap?.command == "01") 		//button pressed
+    	handleButtonPress(descMap.sourceEndpoint as int)
+    else if (descMap?.clusterId == "0006" && descMap?.command == "00") 	//button released
+    	handleButtonRelease(descMap.sourceEndpoint as int)
+    else logIt("Parse: Unhandled message: ${descMap}","trace")
+}
+
+def parseReportAttributeMessage(descMap) {
+	if (descMap?.cluster == "0001" && descMap?.attrId == "0020") createBatteryEvent(getBatteryLevel(descMap.value))
+    else logIt descMap
+}
+
+private createBatteryEvent(percent) {
+	logIt "Battery level at " + percent
+	return createEvent([name: "battery", value: percent])
+}
+
+//this method determines if a press should count as a push or a hold and returns the relevant event type
+private handleButtonRelease(button) {
+	logIt "lastPress state variable: ${state.lastPress}"
+    def sequenceError = {logIt("Uh oh...missed a message? Dropping this event.", "error"); state.lastPress = null; return []}	
+    
+    if (!state.lastPress) return sequenceError()
+	else if (state.lastPress.button != button) return sequenceError()
+    
+    def currentTime = now()
+    def startOfPress = state.lastPress?.time
+    def timeDif = currentTime - startOfPress
+    def holdTimeMillisec = (settings.holdTime?:3).toInteger() * 1000
+    
+    state.lastPress = null	//we're done with this. clear it to make error conditions easier to catch
+    
+    if (timeDif < 0) 
+    //likely a message sequence issue or dropped packet. Drop this press and wait for another.
+    	return sequenceError()
+    else if (timeDif < holdTimeMillisec)
+    	return createButtonEvent(button,"pushed")
+    else 
+    	return createButtonEvent(button,"held")
+}
+
+private handleButtonPress(button) {
+	state.lastPress = [button: button, time: now()]
+}
+
+private createButtonEvent(button,action) {
+	logIt "Button ${button} ${action}"
+	return createEvent([
+    	name: "button",
+        value: action, 
+        data:[buttonNumber: button], 
+        descriptionText: "${device.displayName} button ${button} was ${action}",
+        isStateChange: true, 
+        displayed: true])
+}
+
+private getBatteryLevel(rawValue) {
+	def intValue = Integer.parseInt(rawValue,16)
+	def min = 2.1
+    def max = 3.0
+    def vBatt = intValue / 10
+    return ((vBatt - min) / (max - min) * 100) as int
+}
+
+private handlePresenceEvent(present) {
+    def wasPresent = device.currentState("presence")?.value == "present"
+    if (!wasPresent && present) {
+        logIt "Sensor is present"
+        startTimer()
+    } else if (!present) {
+        logIt "Sensor is not present"
+        stopTimer()
+    }
+    def linkText = getLinkText(device)
+    def eventMap = [
+        name: "presence",
+        value: present ? "present" : "not present",
+        linkText: linkText,
+        descriptionText: "${linkText} has ${present ? 'arrived' : 'left'}",
+    ]
+    logIt "Creating presence event: ${eventMap}"
+    sendEvent(eventMap)
+}
+
+private startTimer() {
+    logIt "Scheduling periodic timer"
+    schedule("0 * * * * ?", checkPresenceCallback)
+}
+
+private stopTimer() {
+    logIt "Stopping periodic timer"
+    unschedule()
+}
+
+def checkPresenceCallback() {
+    def timeSinceLastCheckin = (now() - state.lastCheckin) / 1000
+    def theCheckInterval = (checkInterval ? checkInterval as int : 2) * 60
+    logIt "Sensor checked in ${timeSinceLastCheckin} seconds ago"
+    if (timeSinceLastCheckin >= theCheckInterval) {
+        handlePresenceEvent(false)
+    }
+}
+
+// ****** Utility functions ******
+
+private logIt(str, logLevel = 'debug') {if (settings.logging) log."$logLevel"(str) }

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -53,10 +53,7 @@ def parse(String description) {
 
     def event = zigbee.getEvent(description)
     if (event) {
-        if (event.name=="level" && event.value==0) {}
-        else {
-            sendEvent(event)
-        }
+        sendEvent(event)
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"

devicetypes/smartthings/zigbee-hue-bulb.src/zigbee-hue-bulb.groovy

@@ -11,9 +11,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
-//@Deprecated - Moved to zll-rgbw-bulb
-
 /* Philips Hue (via Zigbee)
 
 Capabilities:
@@ -25,10 +22,10 @@ Capabilities:
   Sensor
   Switch
   Switch Level
-
+  
 Custom Commands:
   setAdjustedColor
-
+    
 */
 
 metadata {
@@ -44,7 +41,7 @@ metadata {
 
 		command "setAdjustedColor"
 
-		//fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000", outClusters: "0019"
+		fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000", outClusters: "0019"
 	}
 
 	// simulator metadata

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -28,9 +28,6 @@ metadata {
         capability "Switch"
         capability "Switch Level"
 
-        attribute "colorName", "string"
-        command "setGenericName"
-
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED A19 RGBW"
@@ -57,15 +54,15 @@ metadata {
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
-        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorName", label: '${currentValue}'
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
         }
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 
         main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorName", "refresh"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
     }
 }
 
@@ -81,16 +78,10 @@ private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 def parse(String description) {
     log.debug "description is $description"
 
-    def event = zigbee.getEvent(description)
-    if (event) {
-        log.debug event
-        if (event.name=="level" && event.value==0) {}
-        else {
-            if (event.name=="colorTemperature") {
-                setGenericName(event.value)
-            }
-            sendEvent(event)
-        }
+    def finalResult = zigbee.getEvent(description)
+    if (finalResult) {
+        log.debug finalResult
+        sendEvent(finalResult)
     }
     else {
         def zigbeeMap = zigbee.parseDescriptionAsMap(description)
@@ -130,27 +121,9 @@ def configure() {
 }
 
 def setColorTemperature(value) {
-    setGenericName(value)
     zigbee.setColorTemperature(value)
 }
 
-//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
-def setGenericName(value){
-    if (value != null) {
-        def genericName = "White"
-        if (value < 3300) {
-            genericName = "Soft White"
-        } else if (value < 4150) {
-            genericName = "Moonlight"
-        } else if (value <= 5000) {
-            genericName = "Cool White"
-        } else if (value >= 5000) {
-            genericName = "Daylight"
-        }
-        sendEvent(name: "colorName", value: genericName)
-    }
-}
-
 def setLevel(value) {
     zigbee.setLevel(value)
 }

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -20,7 +20,6 @@ metadata {
         capability "Switch"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
     }
 
     // simulator metadata

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2015 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -11,133 +11,100 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+/*
+ * Capabilities
+ * - Battery
+ * - Configuration
+ * - Refresh
+ * - Switch
+ * - Valve
+*/
 
 metadata {
-    definition (name: "ZigBee Valve", namespace: "smartthings", author: "SmartThings") {
-        capability "Actuator"
-        capability "Battery"
-        capability "Configuration"
-        capability "Power Source"
-        capability "Refresh"
-        capability "Valve"
+	definition (name: "Zigbee Valve", namespace: "smartthings", author: "SmartThings") {
+		capability "Battery"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Switch"
+		capability "Valve"
 
-        fingerprint profileId: "0104", inClusters: "0000, 0001, 0003, 0006, 0020, 0B02, FC02", outClusters: "0019", manufacturer: "WAXMAN", model: "leakSMART Water Valve v2.10", deviceJoinName: "leakSMART Valve"
-        fingerprint profileId: "0104", inClusters: "0000, 0001, 0003, 0004, 0005, 0006, 0008, 000F, 0020, 0B02", outClusters: "0003, 0019", manufacturer: "WAXMAN", model: "House Water Valve - MDL-TBD", deviceJoinName: "Waxman House Water Valve"
-    }
+		fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0020,0006,0B02", outClusters: "0003"
+	}
 
-    // simulator metadata
-    simulator {
-        // status messages
-        status "on": "on/off: 1"
-        status "off": "on/off: 0"
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
 
-        // reply messages
-        reply "zcl on-off on": "on/off: 1"
-        reply "zcl on-off off": "on/off: 0"
-    }
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
 
-    tiles(scale: 2) {
-        multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-                attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#53a7c0", nextState:"closing"
-                attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#e86d13", nextState:"opening"
-                attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#53a7c0", nextState:"closing"
-                attributeState "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#e86d13", nextState:"opening"
-            }
-            tileAttribute ("powerSource", key: "SECONDARY_CONTROL") {
-                attributeState "powerSource", label:'Power Source: ${currentValue}'
-            }
-        }
-
-        valueTile("battery", "device.battery", inactiveLabel:false, decoration:"flat", width:2, height:2) {
-            state "battery", label:'${currentValue}% battery', unit:""
-        }
-
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        main(["valve"])
-        details(["valve", "battery", "refresh"])
-    }
+	// UI tile definitions
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label: 'closed', action: "switch.on", icon: "st.Outdoor.outdoor16", backgroundColor: "#e86d13"
+			state "on", label: 'open', action: "switch.off", icon: "st.Outdoor.outdoor16", backgroundColor: "#53a7c0"
+		}
+		main "switch"
+		details(["switch"])
+	}
 }
 
-private getCLUSTER_BASIC() { 0x0000 }
-private getBASIC_ATTR_POWER_SOURCE() { 0x0007 }
-private getCLUSTER_POWER() { 0x0001 }
-private getPOWER_ATTR_BATTERY_PERCENTAGE_REMAINING() { 0x0021 }
-private getTYPE_U8() { 0x20 }
-private getTYPE_ENUM8() { 0x30 }
-
 // Parse incoming device messages to generate events
 def parse(String description) {
-    log.debug "description is $description"
-    def event = zigbee.getEvent(description)
-    if (event) {
-        if(event.name == "switch") {
-            event.name = "contact"                  //0006 cluster in valve is tied to contact
-            if(event.value == "on") {
-                event.value = "open"
-            }
-            else if(event.value == "off") {
-                event.value = "closed"
-            }
-        }
-        sendEvent(event)
-    }
-    else {
-        def descMap = zigbee.parseDescriptionAsMap(description)
-        if (descMap.clusterInt == CLUSTER_BASIC && descMap.attrInt == BASIC_ATTR_POWER_SOURCE){
-            def value = descMap.value
-            if (value == "01" || value == "02") {
-                sendEvent(name: "powerSource", value: "Mains")
-            }
-            else if (value == "03") {
-                sendEvent(name: "powerSource", value: "Battery")
-            }
-            else if (value == "04") {
-                sendEvent(name: "powerSource", value: "DC")
-            }
-            else {
-                sendEvent(name: "powerSource", value: "Unknown")
-            }
-        }
-        else if (descMap.clusterInt == CLUSTER_POWER && descMap.attrInt == POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) {
-            event.name = "battery"
-            event.value = Math.round(Integer.parseInt(descMap.value, 16) / 2)
-            sendEvent(event)
-        }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug descMap
-        }
-    }
+	log.info description
+	if (description?.startsWith("catchall:")) {
+        def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
+		def result = createEvent(name: name, value: value)
+        def msg = zigbee.parse(description)
+		log.debug "Parse returned ${result?.descriptionText}"
+		return result
+		log.trace msg
+		log.trace "data: $msg.data"
+	}
+	else {
+		def name = description?.startsWith("on/off: ") ? "switch" : null
+		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
+		def result = createEvent(name: name, value: value)
+		log.debug "Parse returned ${result?.descriptionText}"
+		return result
+	}
+}
+
+// Commands to device
+def on() {
+	log.debug "on()"
+	sendEvent(name: "switch", value: "on")
+	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
+}
+
+def off() {
+	log.debug "off()"
+	sendEvent(name: "switch", value: "off")
+	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
 }
 
 def open() {
-    zigbee.on()
+	log.debug "on()"
+	sendEvent(name: "switch", value: "on")
+	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
 }
 
 def close() {
-    zigbee.off()
+	log.debug "off()"
+	sendEvent(name: "switch", value: "off")
+	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
 }
 
 def refresh() {
-    log.debug "refresh called"
-    zigbee.onOffRefresh() +
-    zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
-    zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) +
-    zigbee.onOffConfig() +
-    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
-    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1)
+	log.debug "sending refresh command"
+	"st rattr 0x${device.deviceNetworkId} 1 6 0"
 }
 
 def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() +
-    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
-    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1) +
-    zigbee.onOffRefresh() +
-    zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
-    zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING)
+
+	"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}"
 }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -49,6 +49,9 @@ metadata {
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
                 attributeState "level", action:"switch level.setLevel"
             }
+            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
+                attributeState "colorName", label:'${currentValue}'
+            }
         }
 
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
@@ -58,12 +61,12 @@ metadata {
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
-        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorName", label: '${currentValue}'
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
         }
 
         main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorName", "refresh"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
     }
 }
 
@@ -72,13 +75,7 @@ def parse(String description) {
     log.debug "description is $description"
     def event = zigbee.getEvent(description)
     if (event) {
-        if (event.name=="level" && event.value==0) {}
-        else {
-            if (event.name=="colorTemperature") {
-                setGenericName(event.value)
-            }
-            sendEvent(event)
-        }
+        sendEvent(event)
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -1,102 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-metadata {
-    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
-
-        capability "Actuator"
-        capability "Configuration"
-        capability "Polling"
-        capability "Refresh"
-        capability "Switch"
-        capability "Switch Level"
-
-        //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019"
-        //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019", manufacturer: "CREE", model: "Connected A-19 60W Equivalent", deviceJoinName: "Cree Connected Bulb"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 W clear", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 W clear - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019", manufacturer: "Philips", model: "LWB006", deviceJoinName: "Philips Hue White"
-    }
-
-    // simulator metadata
-    simulator {
-        // status messages
-        status "on": "on/off: 1"
-        status "off": "on/off: 0"
-
-        // reply messages
-        reply "zcl on-off on": "on/off: 1"
-        reply "zcl on-off off": "on/off: 0"
-    }
-
-    // UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel"
-            }
-        }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-        main "switch"
-        details(["switch", "refresh"])
-    }
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    log.debug "description is $description"
-
-    def resultMap = zigbee.getEvent(description)
-    if (resultMap) {
-        sendEvent(resultMap)
-    }
-    else {
-        log.debug "DID NOT PARSE MESSAGE for description : $description"
-        log.debug zigbee.parseDescriptionAsMap(description)
-    }
-}
-
-def off() {
-    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def on() {
-    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def setLevel(value) {
-    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
-}
-
-def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
-}
-
-def poll() {
-    refresh()
-}
-
-def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
-}

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -1,150 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-metadata {
-    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
-
-        capability "Actuator"
-        capability "Color Control"
-        capability "Color Temperature"
-        capability "Configuration"
-        capability "Polling"
-        capability "Refresh"
-        capability "Switch"
-        capability "Switch Level"
-
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 RGBW"
-    }
-
-    // UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel"
-            }
-            tileAttribute ("device.color", key: "COLOR_CONTROL") {
-                attributeState "color", action:"color control.setColor"
-            }
-        }
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
-    }
-}
-
-//Globals
-private getATTRIBUTE_HUE() { 0x0000 }
-private getATTRIBUTE_SATURATION() { 0x0001 }
-private getHUE_COMMAND() { 0x00 }
-private getSATURATION_COMMAND() { 0x03 }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    log.debug "description is $description"
-
-    def finalResult = zigbee.getEvent(description)
-    if (finalResult) {
-        log.debug finalResult
-        sendEvent(finalResult)
-    }
-    else {
-        def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-        log.trace "zigbeeMap : $zigbeeMap"
-
-        if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
-            if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
-                sendEvent(name: "hue", value: hueValue, displayed:false)
-            }
-            else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-                sendEvent(name: "saturation", value: saturationValue, displayed:false)
-            }
-        }
-        else {
-            log.info "DID NOT PARSE MESSAGE for description : $description"
-        }
-    }
-}
-
-def on() {
-    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def off() {
-    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def refresh() {
-    refreshAttributes() + configureAttributes()
-}
-
-def poll() {
-    refreshAttributes()
-}
-
-def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    configureAttributes() + refreshAttributes()
-}
-
-def configureAttributes() {
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
-}
-
-def refreshAttributes() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION)
-}
-
-def setColorTemperature(value) {
-    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
-}
-
-def setLevel(value) {
-    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
-}
-
-def setColor(value){
-    log.trace "setColor($value)"
-    zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
-}
-
-def setHue(value) {
-    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
-}
-
-def setSaturation(value) {
-    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
-}

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -1,124 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-metadata {
-    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
-
-        capability "Actuator"
-        capability "Color Temperature"
-        capability "Configuration"
-        capability "Polling"
-        capability "Refresh"
-        capability "Switch"
-        capability "Switch Level"
-
-        attribute "colorName", "string"
-        command "setGenericName"
-
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"PAR16 50 TW", deviceJoinName: "OSRAM LIGHTIFY LED PAR16 50 Tunable White"
-    }
-
-    // UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel"
-            }
-            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
-                attributeState "colorName", label:'${currentValue}'
-            }
-        }
-
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
-
-        main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
-    }
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    log.debug "description is $description"
-    def event = zigbee.getEvent(description)
-    if (event) {
-        sendEvent(event)
-    }
-    else {
-        log.warn "DID NOT PARSE MESSAGE for description : $description"
-        log.debug zigbee.parseDescriptionAsMap(description)
-    }
-}
-
-def off() {
-    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def on() {
-    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def setLevel(value) {
-    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()
-}
-
-def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
-}
-
-def poll() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-}
-
-def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-}
-
-def setColorTemperature(value) {
-    setGenericName(value)
-    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
-}
-
-//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
-def setGenericName(value){
-    if (value != null) {
-        def genericName = ""
-        if (value < 3300) {
-            genericName = "Soft White"
-        } else if (value < 4150) {
-            genericName = "Moonlight"
-        } else if (value <= 5000) {
-            genericName = "Cool White"
-        } else {
-            genericName = "Daylight"
-        }
-        sendEvent(name: "colorName", value: genericName)
-    }
-}

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -1,205 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings") {
-		capability "Switch Level"
-		capability "Actuator"
-		capability "Switch"
-		capability "Polling"
-		capability "Refresh"
-		capability "Sensor"
-
-		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
-	}
-
-	simulator {
-		status "on":  "command: 2003, payload: FF"
-		status "off": "command: 2003, payload: 00"
-		status "09%": "command: 2003, payload: 09"
-		status "10%": "command: 2003, payload: 0A"
-		status "33%": "command: 2003, payload: 21"
-		status "66%": "command: 2003, payload: 42"
-		status "99%": "command: 2003, payload: 63"
-
-		// reply messages
-		reply "2001FF,delay 5000,2602": "command: 2603, payload: FF"
-		reply "200100,delay 5000,2602": "command: 2603, payload: 00"
-		reply "200119,delay 5000,2602": "command: 2603, payload: 19"
-		reply "200132,delay 5000,2602": "command: 2603, payload: 32"
-		reply "20014B,delay 5000,2602": "command: 2603, payload: 4B"
-		reply "200163,delay 5000,2602": "command: 2603, payload: 63"
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-		}
-
-		standardTile("refresh", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "level", label:'${currentValue} %', unit:"%", backgroundColor:"#ffffff"
-		}
-
-		main(["switch"])
-		details(["switch", "level", "refresh"])
-
-	}
-}
-
-def parse(String description) {
-	def result = null
-	if (description != "updated") {
-		log.debug "parse() >> zwave.parse($description)"
-		def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
-		if (cmd) {
-			result = zwaveEvent(cmd)
-		}
-	}
-	if (result?.name == 'hail' && hubFirmwareLessThan("000.011.00602")) {
-		result = [result, response(zwave.basicV1.basicGet())]
-		log.debug "Was hailed: requesting state update"
-	} else {
-		log.debug "Parse returned ${result?.descriptionText}"
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	dimmerEvents(cmd)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	dimmerEvents(cmd)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelReport cmd) {
-	dimmerEvents(cmd)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelSet cmd) {
-	dimmerEvents(cmd)
-}
-
-private dimmerEvents(physicalgraph.zwave.Command cmd) {
-	def value = (cmd.value ? "on" : "off")
-	def result = [createEvent(name: "switch", value: value)]
-	if (cmd.value && cmd.value <= 100) {
-		result << createEvent(name: "level", value: cmd.value, unit: "%")
-	}
-	return result
-}
-
-
-def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
-	log.debug "ConfigurationReport $cmd"
-	def value = "when off"
-	if (cmd.configurationValue[0] == 1) {value = "when on"}
-	if (cmd.configurationValue[0] == 2) {value = "never"}
-	createEvent([name: "indicatorStatus", value: value])
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
-	createEvent([name: "hail", value: "hail", descriptionText: "Switch button was pressed", displayed: false])
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-	log.debug "manufacturerName: ${cmd.manufacturerName}"
-	log.debug "productId:        ${cmd.productId}"
-	log.debug "productTypeId:    ${cmd.productTypeId}"
-	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-	updateDataValue("MSR", msr)
-	updateDataValue("manufacturer", cmd.manufacturerName)
-	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStopLevelChange cmd) {
-	[createEvent(name:"switch", value:"on"), response(zwave.switchMultilevelV1.switchMultilevelGet().format())]
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	// Handles all Z-Wave commands we aren't interested in
-	[:]
-}
-
-def on() {
-	delayBetween([
-			zwave.basicV1.basicSet(value: 0xFF).format(),
-			zwave.switchMultilevelV1.switchMultilevelGet().format()
-	],5000)
-}
-
-def off() {
-	delayBetween([
-			zwave.basicV1.basicSet(value: 0x00).format(),
-			zwave.switchMultilevelV1.switchMultilevelGet().format()
-	],5000)
-}
-
-def setLevel(value) {
-	log.debug "setLevel >> value: $value"
-	def valueaux = value as Integer
-	def level = Math.max(Math.min(valueaux, 99), 0)
-	if (level > 0) {
-		sendEvent(name: "switch", value: "on")
-	} else {
-		sendEvent(name: "switch", value: "off")
-	}
-	sendEvent(name: "level", value: level, unit: "%")
-	delayBetween ([zwave.basicV1.basicSet(value: level).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
-}
-
-def setLevel(value, duration) {
-	log.debug "setLevel >> value: $value, duration: $duration"
-	def valueaux = value as Integer
-	def level = Math.max(Math.min(valueaux, 99), 0)
-	def dimmingDuration = duration < 128 ? duration : 128 + Math.round(duration / 60)
-	def getStatusDelay = duration < 128 ? (duration*1000)+2000 : (Math.round(duration / 60)*60*1000)+2000
-	delayBetween ([zwave.switchMultilevelV2.switchMultilevelSet(value: level, dimmingDuration: dimmingDuration).format(),
-				   zwave.switchMultilevelV1.switchMultilevelGet().format()], getStatusDelay)
-}
-
-def poll() {
-	zwave.switchMultilevelV1.switchMultilevelGet().format()
-}
-
-def refresh() {
-	log.debug "refresh() is called"
-	def commands = []
-	commands << zwave.switchMultilevelV1.switchMultilevelGet().format()
-	if (getDataValue("MSR") == null) {
-		commands << zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
-	}
-	delayBetween(commands,100)
-}
-
-def invertSwitch(invert=true) {
-	if (invert) {
-		zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 4, size: 1).format()
-	}
-	else {
-		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
-	}
-}

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -28,6 +28,7 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x86,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -35,7 +36,6 @@ metadata {
 		// status messages
 		status "open":  "command: 2001, payload: FF"
 		status "closed": "command: 2001, payload: 00"
-		status "wake up": "command: 8407, payload: "
 	}
 
 	// UI tile definitions
@@ -81,7 +81,7 @@ def updated() {
 	def cmds = []
 	if (!state.MSR) {
 		cmds = [
-			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
+			zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
 			"delay 1200",
 			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 		]
@@ -94,9 +94,9 @@ def updated() {
 }
 
 def configure() {
-	commands([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
-		zwave.batteryV1.batteryGet()
+	delayBetween([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
+		batteryGetCommand()
 	], 6000)
 }
 
@@ -147,11 +147,12 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 			result << sensorValueEvent(1)
 		} else if (cmd.event == 0x03) {
 			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId))
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
 			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
 		} else if (cmd.event == 0x07) {
-			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 			result << createEvent(name: "motion", value: "active", descriptionText:"$device.displayName detected motion")
 		}
 	} else if (cmd.notificationType) {
@@ -169,11 +170,12 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	def event = createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
 	def cmds = []
 	if (!state.MSR) {
-		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		cmds << zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId).format()
+		cmds << zwave.manufacturerSpecificV2.manufacturerSpecificGet().format()
 		cmds << "delay 1200"
 	}
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
-		cmds << command(zwave.batteryV1.batteryGet())
+		cmds << batteryGetCommand()
 	} else {
 		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 	}
@@ -210,7 +212,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 		if (msr == "0086-0102-0059") {
 			result << response(zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format())
 		} else {
-			result << response(command(zwave.batteryV1.batteryGet()))
+			result << response(batteryGetCommand())
 		}
 	}
 
@@ -218,7 +220,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x85: 2, 0x70: 1])
 	// log.debug "encapsulated: $encapsulatedCommand"
 	if (encapsulatedCommand) {
 		state.sec = 1
@@ -230,16 +232,12 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
 }
 
-private command(physicalgraph.zwave.Command cmd) {
-	if (state.sec == 1) {
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	} else {
-		cmd.format()
+def batteryGetCommand() {
+	def cmd = zwave.batteryV1.batteryGet()
+	if (state.sec) {
+		cmd = zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd)
 	}
-}
-
-private commands(commands, delay=200) {
-	delayBetween(commands.collect{ command(it) }, delay)
+	cmd.format()
 }
 
 def retypeBasedOnMSR() {
@@ -262,12 +260,8 @@ def retypeBasedOnMSR() {
 			setDeviceType("3-in-1 Multisensor Plus (SG)")
 			break
 		case "0109-2001-0106":  // Vision door/window
-			log.debug "Changing device type to Z-Wave Plus Door/Window Sensor"
-			setDeviceType("Z-Wave Plus Door/Window Sensor")
-			break
-		case "0109-2002-0205": // Vision Motion
-			log.debug "Changing device type to Z-Wave Plus Motion/Temp Sensor"
-			setDeviceType("Z-Wave Plus Motion/Temp Sensor")
+			log.debug "Changing device type to Door / Window Sensor Plus (SG)"
+			setDeviceType("Door / Window Sensor Plus (SG)")
 			break
 	}
 }

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -21,13 +21,6 @@ metadata {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
-
-		fingerprint mfr: "011F", prod: "0001", model: "0001", deviceJoinName: "Schlage Motion Sensor"  // Schlage motion
-		fingerprint mfr: "014A", prod: "0001", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion
-		fingerprint mfr: "014A", prod: "0004", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion +
-		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
-		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
-		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
 	}
 
 	simulator {
@@ -132,9 +125,9 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	}
 	if (!state.lastbat || (new Date().time) - state.lastbat > 53*60*60*1000) {
 		result << response(zwave.batteryV1.batteryGet())
-	} else {
-		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+		result << response("delay 1200")
 	}
+	result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	result
 }
 

devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy

@@ -1,270 +0,0 @@
-/**
-*	Copyright 2016 SmartThings
-*	Copyright 2015 AstraLink
-*
-*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
-*	in compliance with the License. You may obtain a copy of the License at:
-*
-*		http://www.apache.org/licenses/LICENSE-2.0
-*
-*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
-*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
-*	for the specific language governing permissions and limitations under the License.
-*
-*	Z-Wave Plus Door/Window Sensor, ZD2102*-5
-*
-*/
-
-metadata {
-	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
-		capability "Contact Sensor"
-		capability "Configuration"
-		capability "Battery"
-		capability "Sensor"
-
-		// for Astralink
-		attribute "ManufacturerCode", "string"
-		attribute "ProduceTypeCode", "string"
-		attribute "ProductCode", "string"
-		attribute "WakeUp", "string"
-		attribute "WirelessConfig", "string"
-
-		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x70, 0x84, 0x7A"
-		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,71"
-		fingerprint mfr:"0109", prod:"2001", model:"0106"  // not using deviceJoinName because it's sold under different brand names
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
-			}
-		}
-		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-
-		main (["contact"])
-		details(["contact","battery"])
-	}
-
-	simulator {
-		// messages the device returns in response to commands it receives
-		status "open (basic)" : "command: 9881, payload: 00 20 01 FF"
-		status "closed (basic)" : "command: 9881 payload: 00 20 01 00"
-		status "open (notification)" : "command: 9881, payload: 00 71 05 06 FF 00 FF 06 16 00 00"
-		status "closed (notification)" : "command: 9881, payload: 00 71 05 06 00 00 FF 06 17 00 00"
-		status "tamper: enclosure opened" : "command: 9881, payload: 00 71 05 07 FF 00 FF 07 03 00 00"
-		status "tamper: enclosure replaced" : "command: 9881, payload: 00 71 05 07 00 00 FF 07 00 00 00"
-		status "wake up" : "command: 9881, payload: 00 84 07"
-		status "battery (100%)" : "command: 9881, payload: 00 80 03 64"
-		status "battery low" : "command: 9881, payload: 00 80 03 FF"
-	}
-}
-
-def configure() {
-	log.debug "configure()"
-	def cmds = []
-
-	if (state.sec != 1) {
-		// secure inclusion may not be complete yet
-		cmds << "delay 1000"
-	}
-
-	cmds += secureSequence([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
-		zwave.batteryV1.batteryGet(),
-	], 500)
-
-	cmds << "delay 8000"
-	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
-	return cmds
-}
-
-private getCommandClassVersions() {
-	[
-		0x71: 3,  // Notification
-		0x5E: 2,  // ZwaveplusInfo
-		0x59: 1,  // AssociationGrpInfo
-		0x85: 2,  // Association
-		0x20: 1,  // Basic
-		0x80: 1,  // Battery
-		0x70: 1,  // Configuration
-		0x5A: 1,  // DeviceResetLocally
-		0x7A: 2,  // FirmwareUpdateMd
-		0x72: 2,  // ManufacturerSpecific
-		0x73: 1,  // Powerlevel
-		0x98: 1,  // Security
-		0x84: 2,  // WakeUp
-		0x86: 1,  // Version
-	]
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	def result = []
-	def cmd
-	if (description.startsWith("Err 106")) {
-		state.sec = 0
-		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
-				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
-	} else if (description.startsWith("Err")) {
-		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
-	} else {
-		cmd = zwave.parse(description, commandClassVersions)
-		if (cmd) {
-			result = zwaveEvent(cmd)
-		}
-	}
-
-	if (result instanceof List) {
-		result = result.flatten()
-	}
-
-	log.debug "Parsed '$description' to $result"
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
-	log.debug "encapsulated: $encapsulatedCommand"
-	if (encapsulatedCommand) {
-		state.sec = 1
-		return zwaveEvent(encapsulatedCommand)
-	} else {
-		log.warn "Unable to extract encapsulated cmd from $cmd"
-		return [createEvent(descriptionText: cmd.toString())]
-	}
-}
-
-def sensorValueEvent(value) {
-	if (value) {
-		createEvent(name: "contact", value: "open", descriptionText: "$device.displayName is open")
-	} else {
-		createEvent(name: "contact", value: "closed", descriptionText: "$device.displayName is closed")
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
-	return sensorValueEvent(cmd.sensorValue)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
-	return sensorValueEvent(cmd.sensorState)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
-	def result = []
-	if (cmd.notificationType == 0x06 && cmd.event == 0x16) {
-		result << sensorValueEvent(1)
-	} else if (cmd.notificationType == 0x06 && cmd.event == 0x17) {
-		result << sensorValueEvent(0)
-	} else if (cmd.notificationType == 0x07) {
-		if (cmd.event == 0x00) {
-			if (cmd.eventParametersLength == 0 || cmd.eventParameter[0] != 3) {
-				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
-			} else {
-				result << sensorValueEvent(0)
-			}
-		} else if (cmd.event == 0x01 || cmd.event == 0x02) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x03) {
-			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			if (!device.currentState("ManufacturerCode")) {
-				result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
-			}
-		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
-			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
-		} else {
-			result << createEvent(descriptionText: "$device.displayName event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
-		}
-	} else if (cmd.notificationType) {
-		result << createEvent(descriptionText: "$device.displayName notification $cmd.notificationType event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
-	} else {
-		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
-		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, isStateChange: true, displayed: false)
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
-	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
-	def cmds = []
-
-	if (!device.currentState("ManufacturerCode")) {
-		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-		cmds << "delay 2000"
-	}
-	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
-		event.descriptionText += ", requesting battery"
-		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
-		cmds << "delay 800"
-		cmds << secure(zwave.batteryV1.batteryGet())
-		cmds << "delay 2000"
-	} else {
-		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
-	}
-	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
-
-	return [event, response(cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-	def event = createEvent(map)
-
-	// Save at least one battery report in events list every few days
-	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
-		map.isStateChange = true
-	}
-	state.lastbat = now()
-	return [event]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	def result = []
-	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
-	def productTypeCode = String.format("%04X", cmd.productTypeId)
-	def productCode = String.format("%04X", cmd.productId)
-	def wirelessConfig = "ZWP"
-	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
-
-	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
-	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
-	result << createEvent(name: "ProductCode", value: productCode)
-	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
-
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
-}
-
-private secure(physicalgraph.zwave.Command cmd) {
-	if (state.sec == 0) {  // default to secure
-		cmd.format()
-	} else {
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	}
-}
-
-private secureSequence(commands, delay=200) {
-	delayBetween(commands.collect{ secure(it) }, delay)
-}

devicetypes/smartthings/zwave-plus-motion-temp-sensor.src/zwave-plus-motion-temp-sensor.groovy

@@ -1,327 +0,0 @@
-/**
-*	Copyright 2016 SmartThings
-*	Copyright 2015 AstraLink
-*
-*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
-*	in compliance with the License. You may obtain a copy of the License at:
-*
-*		http://www.apache.org/licenses/LICENSE-2.0
-*
-*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
-*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
-*	for the specific language governing permissions and limitations under the License.
-*
-*	Z-Wave Plus Motion Sensor with Temperature Measurement, ZP3102*-5
-*
-*/
-
-metadata {
-	definition (name: "Z-Wave Plus Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
-		capability "Motion Sensor"
-		capability "Temperature Measurement"
-		capability "Configuration"
-		capability "Battery"
-		capability "Sensor"
-
-		// for Astralink
-		attribute "ManufacturerCode", "string"
-		attribute "ProduceTypeCode", "string"
-		attribute "ProductCode", "string"
-		attribute "WakeUp", "string"
-		attribute "WirelessConfig", "string"
-				
-		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x31, 0x70, 0x84, 0x7A"
-		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,31,71"
-		fingerprint mfr:"0109", prod:"2002", model:"0205"  // not using deviceJoinName because it's sold under different brand names
-	}
-
-	tiles {
-		standardTile("motion", "device.motion", width: 3, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
-		}
-
-		valueTile("temperature", "device.temperature", inactiveLabel: false) {
-			state "temperature", label:'${currentValue}°',
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
-		}
-		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
-			state "battery", label:'${currentValue}% battery', unit:"%"
-		}
-
-		main(["motion", "temperature"])
-		details(["motion", "temperature", "battery"])
-	}
-}
-
-def updated() {
-	if (!device.currentState("ManufacturerCode")) {
-		response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
-	}
-}
-
-def configure() {
-	log.debug "configure()"
-	def cmds = []
-
-	if (state.sec != 1) {
-		// secure inclusion may not be complete yet
-		cmds << "delay 1000"
-	}
-
-	cmds += secureSequence([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
-		zwave.batteryV1.batteryGet(),
-		zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
-	], 500)
-
-	cmds << "delay 8000"
-	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
-	return cmds
-}
-
-private getCommandClassVersions() {
-	[
-		0x71: 3,  // Notification
-		0x5E: 2,  // ZwaveplusInfo
-		0x59: 1,  // AssociationGrpInfo
-		0x85: 2,  // Association
-		0x20: 1,  // Basic
-		0x80: 1,  // Battery
-		0x70: 1,  // Configuration
-		0x5A: 1,  // DeviceResetLocally
-		0x7A: 2,  // FirmwareUpdateMd
-		0x72: 2,  // ManufacturerSpecific
-		0x73: 1,  // Powerlevel
-		0x98: 1,  // Security
-		0x31: 5,  // SensorMultilevel
-		0x84: 2	  // WakeUp
-	]
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	def result = []
-	def cmd
-	if (description.startsWith("Err 106")) {
-		state.sec = 0
-		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
-				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
-	} else if (description.startsWith("Err")) {
-		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
-	} else {
-		cmd = zwave.parse(description, commandClassVersions)
-		if (cmd) {
-			result = zwaveEvent(cmd)
-		}
-	}
-
-	if (result instanceof List) {
-		result = result.flatten()
-	}
-
-	log.debug "Parsed '$description' to $result"
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
-	log.debug "encapsulated: $encapsulatedCommand"
-	if (encapsulatedCommand) {
-		state.sec = 1
-		return zwaveEvent(encapsulatedCommand)
-	} else {
-		log.warn "Unable to extract encapsulated cmd from $cmd"
-		return [createEvent(descriptionText: cmd.toString())]
-	}
-}
-
-def sensorValueEvent(value) {
-	def result = []
-	if (value) {
-		log.debug "sensorValueEvent($value) : active"
-		result << createEvent(name: "motion", value: "active", descriptionText: "$device.displayName detected motion")
-	} else {
-		log.debug "sensorValueEvent($value) : inactive"
-		result << createEvent(name: "motion", value: "inactive", descriptionText: "$device.displayName motion has stopped")
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
-	return sensorValueEvent(cmd.sensorValue)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
-	return sensorValueEvent(cmd.sensorState)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
-	def result = []
-	if (cmd.notificationType == 0x07) {
-		if (cmd.event == 0x01 || cmd.event == 0x02) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x03) {
-			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
-		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
-			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
-		} else if (cmd.event == 0x07) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x08) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x00) {
-			if (cmd.eventParametersLength && cmd.eventParameter[0] == 3) {
-				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
-			} else {
-				result << sensorValueEvent(0)
-			}
-		} else if (cmd.event == 0xFF) {
-			result << sensorValueEvent(1)
-		} else {
-			result << createEvent(descriptionText: "$device.displayName sent event $cmd.event")
-		}
-	} else if (cmd.notificationType) {
-		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
-		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
-	} else {
-		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
-		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
-	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
-	def cmds = []
-
-	if (!device.currentState("ManufacturerCode")) {
-		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-		cmds << "delay 2000"
-	}
-	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
-		event.descriptionText += ", requesting battery"
-		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
-		cmds << "delay 800"
-		cmds << secure(zwave.batteryV1.batteryGet())
-		cmds << "delay 2000"
-	} else {
-		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
-	}
-	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
-
-	return [event, response(cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def result = []
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-	def event = createEvent(map)
-
-	// Save at least one battery report in events list every few days
-	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
-		map.isStateChange = true
-	}
-	state.lastbat = now()
-	return [event]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
-	def result = []
-	def map = [:]
-	switch (cmd.sensorType) {
-		case 1:
-			def cmdScale = cmd.scale == 1 ? "F" : "C"
-			map.name = "temperature"
-			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
-			map.unit = getTemperatureScale()
-			break;
-		case 3:
-			map.name = "illuminance"
-			map.value = cmd.scaledSensorValue.toInteger().toString()
-			map.unit = "lux"
-			break;
-		case 5:
-			map.name = "humidity"
-			map.value = cmd.scaledSensorValue.toInteger().toString()
-			map.unit = cmd.scale == 0 ? "%" : ""
-			break;
-		case 0x1E:
-			map.name = "loudness"
-			map.unit = cmd.scale == 1 ? "dBA" : "dB"
-			map.value = cmd.scaledSensorValue.toString()
-			break;
-		default:
-			map.descriptionText = cmd.toString()
-	}
-	result << createEvent(map)
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	def result = []
-	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
-	def productTypeCode = String.format("%04X", cmd.productTypeId)
-	def productCode = String.format("%04X", cmd.productId)
-	def wirelessConfig = "ZWP"
-	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
-	
-	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
-	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
-	result << createEvent(name: "ProductCode", value: productCode)
-	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
-
-	if (manufacturerCode == "0109" && productTypeCode == "2002") {
-		result << response(secureSequence([
-			// Change re-trigger duration to 1 minute
-			zwave.configurationV1.configurationSet(parameterNumber: 1, configurationValue: [1], size: 1),
-			zwave.batteryV1.batteryGet(),
-			zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
-		], 400))
-	}
-
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
-}
-
-private secure(physicalgraph.zwave.Command cmd) {
-	if (state.sec == 0) {  // default to secure
-		cmd.format()
-	} else {
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	}
-}
-
-private secureSequence(commands, delay=200) {
-	delayBetween(commands.collect{ secure(it) }, delay)
-}

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -1,143 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Z-Wave Switch Generic", namespace: "smartthings", author: "SmartThings") {
-		capability "Actuator"
- 		capability "Switch"
-		capability "Polling"
-		capability "Refresh"
-		capability "Sensor"
-
-		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
-	}
-
-	// simulator metadata
-	simulator {
-		status "on":  "command: 2003, payload: FF"
-		status "off": "command: 2003, payload: 00"
-
-		// reply messages
-		reply "2001FF,delay 100,2502": "command: 2503, payload: FF"
-		reply "200100,delay 100,2502": "command: 2503, payload: 00"
-	}
-
-	// tile definitions
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
-				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
-			}
-		}
-
-		standardTile("refresh", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main "switch"
-		details(["switch","refresh"])
-	}
-}
-
-def parse(String description) {
-	def result = null
-	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
-	if (cmd) {
-		result = createEvent(zwaveEvent(cmd))
-	}
-	if (result?.name == 'hail' && hubFirmwareLessThan("000.011.00602")) {
-		result = [result, response(zwave.basicV1.basicGet())]
-		log.debug "Was hailed: requesting state update"
-	} else {
-		log.debug "Parse returned ${result?.descriptionText}"
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	[name: "switch", value: cmd.value ? "on" : "off", type: "physical"]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	[name: "switch", value: cmd.value ? "on" : "off", type: "physical"]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
-	[name: "switch", value: cmd.value ? "on" : "off", type: "digital"]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
-	def value = "when off"
-	if (cmd.configurationValue[0] == 1) {value = "when on"}
-	if (cmd.configurationValue[0] == 2) {value = "never"}
-	[name: "indicatorStatus", value: value, display: false]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
-	[name: "hail", value: "hail", descriptionText: "Switch button was pressed", displayed: false]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-	log.debug "manufacturerName: ${cmd.manufacturerName}"
-	log.debug "productId:        ${cmd.productId}"
-	log.debug "productTypeId:    ${cmd.productTypeId}"
-	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-	updateDataValue("MSR", msr)
-	updateDataValue("manufacturer", cmd.manufacturerName)
-	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
-}
-
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	// Handles all Z-Wave commands we aren't interested in
-	[:]
-}
-
-def on() {
-	delayBetween([
-		zwave.basicV1.basicSet(value: 0xFF).format(),
-		zwave.switchBinaryV1.switchBinaryGet().format()
-	])
-}
-
-def off() {
-	delayBetween([
-		zwave.basicV1.basicSet(value: 0x00).format(),
-		zwave.switchBinaryV1.switchBinaryGet().format()
-	])
-}
-
-def poll() {
-	delayBetween([
-		zwave.switchBinaryV1.switchBinaryGet().format(),
-		zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
-	])
-}
-
-def refresh() {
-	delayBetween([
-		zwave.switchBinaryV1.switchBinaryGet().format(),
-		zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
-	])
-}
-
-def invertSwitch(invert=true) {
-	if (invert) {
-		zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 4, size: 1).format()
-	}
-	else {
-		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
-	}
-}

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -15,15 +15,12 @@ metadata {
 	definition (name: "Z-Wave Switch", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Indicator"
- 		capability "Switch"
+		capability "Switch"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
-		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
-		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
-		fingerprint mfr:"0063", prod:"5052", deviceJoinName: "Z-Wave Plug-In Switch"
-		fingerprint mfr:"0113", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
+		fingerprint inClusters: "0x25"
 	}
 
 	// simulator metadata
@@ -36,10 +33,6 @@ metadata {
 		reply "200100,delay 100,2502": "command: 2503, payload: 00"
 	}
 
-	preferences {
-		input "ledIndicator", "enum", title: "LED Indicator", description: "Turn LED indicator... ", required: false, options:["on": "When On", "off": "When Off", "never": "Never"], defaultValue: "off"
-	}
-
 	// tile definitions
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
@@ -59,27 +52,10 @@ metadata {
 		}
 
 		main "switch"
-		details(["switch","refresh"])
+		details(["switch","refresh","indicator"])
 	}
 }
 
-def updated(){
-  switch (ledIndicator) {
-        case "on":
-            indicatorWhenOn()
-            break
-        case "off":
-            indicatorWhenOff()
-            break
-        case "never":
-            indicatorNever()
-            break
-        default:
-            indicatorWhenOn()
-            break
-    }
-}
-
 def parse(String description) {
 	def result = null
 	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
@@ -119,17 +95,11 @@ def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-	log.debug "manufacturerName: ${cmd.manufacturerName}"
-	log.debug "productId:        ${cmd.productId}"
-	log.debug "productTypeId:    ${cmd.productTypeId}"
-	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-	updateDataValue("MSR", msr)
-	updateDataValue("manufacturer", cmd.manufacturerName)
-	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
+	if (state.manufacturer != cmd.manufacturerName) {
+		updateDataValue("manufacturer", cmd.manufacturerName)
+	}
 }
 
-
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in
 	[:]
@@ -163,19 +133,19 @@ def refresh() {
 	])
 }
 
-void indicatorWhenOn() {
+def indicatorWhenOn() {
 	sendEvent(name: "indicatorStatus", value: "when on", display: false)
-	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
+	zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()
 }
 
-void indicatorWhenOff() {
+def indicatorWhenOff() {
 	sendEvent(name: "indicatorStatus", value: "when off", display: false)
-	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
+	zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()
 }
 
-void indicatorNever() {
+def indicatorNever() {
 	sendEvent(name: "indicatorStatus", value: "never", display: false)
-	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
+	zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()
 }
 
 def invertSwitch(invert=true) {

devicetypes/test-arrival-senser1/test-arrival-senser1.src/test-arrival-senser1.groovy

@@ -0,0 +1,34 @@
+/**
+ *  test arrival senser1
+ *
+ *  Copyright 2016 이현주
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "test arrival senser1", namespace: "test arrival senser1", author: "이현주") {
+		capability "Sensor"
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		// TODO: define your main and details tiles here
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+
+}

smartapps/com-gidjit-smartthings-hub/gidjit-hub.src/gidjit-hub.groovy

@@ -1,259 +0,0 @@
-/**
- *  Gidjit Hub
- *
- *  Copyright 2016 Matthew Page
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Gidjit Hub",
-    namespace: "com.gidjit.smartthings.hub",
-    author: "Matthew Page",
-    description: "Act as an endpoint so user's of Gidjit can quickly access and control their devices and execute routines. Users can do this quickly as Gidjit filters these actions  based on their environment",
-    category: "Convenience",
-    iconUrl: "http://www.gidjit.com/appicon.png",
-    iconX2Url: "http://www.gidjit.com/appicon@2x.png",
-    iconX3Url: "http://www.gidjit.com/appicon@3x.png",
-    oauth: [displayName: "Gidjit", displayLink: "www.gidjit.com"])
-
-preferences(oauthPage: "deviceAuthorization") {
-    // deviceAuthorization page is simply the devices to authorize
-    page(name: "deviceAuthorization", title: "Device Authorization", nextPage: "instructionPage",
-         install: false, uninstall: true) {
-  		section ("Allow Gidjit to have access, thereby allowing you to quickly control and monitor your following devices. Privacy Policy can be found at http://priv.gidjit.com/privacy.html") {
-    		input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
-    		input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
-    		input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
-        }
-
-    }
-    page(name: "instructionPage", title: "Device Discovery", install: true) {
-        section() {
-            paragraph "Now the process is complete return to the Devices section of the Detected Screen. From there and you can add actions to each of your device panels, including launching SmartThings routines."
-        }
-    }
-}
-
-mappings {
-  path("/structureinfo") {
-    action: [
-      GET: "structureInfo"
-    ]
-  }
-  path("/helloactions") {
-    action: [
-      GET: "helloActions"
-    ]
-  }
-  path("/helloactions/:label") {
-    action: [
-      PUT: "executeAction"
-    ]
-  }
-
-  path("/switch/:id/:command") {
-    action: [
-      PUT: "updateSwitch"
-    ]
-  }
-
-  path("/thermostat/:id/:command") {
-    action: [
-      PUT: "updateThermostat"
-    ]
-  }
-
-  path("/windowshade/:id/:command") {
-    action: [
-      PUT: "updateWindowShade"
-    ]
-  }
-  path("/acquiredata/:id") {
-    action: [
-      GET: "acquiredata"
-    ]
-  }
-}
-
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-	// subscribe to attributes, devices, locations, etc.
-}
-def helloActions() {
-	def actions = location.helloHome?.getPhrases()*.label
-    if(!actions) {
-    	return []
-    }
-	return actions
-}
-def executeAction() {
-    def actions = location.helloHome?.getPhrases()*.label
-    def a = actions?.find() { it == params.label }
-    if (!a) {
-        httpError(400, "invalid label $params.label")
-        return
-    }
-    location.helloHome?.execute(params.label)
-}
-/*  this is the primary function called to query at the structure and its devices */
-def structureInfo() { //list all devices
-	def list = [:]
-    def currId = location.id
-    list[currId] = [:]
-    list[currId].name = location.name
-    list[currId].id = location.id
-    list[currId].temperatureScale = location.temperatureScale
-    list[currId].devices = [:]
-  
-    def setValues = {
-   		if (params.brief) {
-            return [id: it.id, name: it.displayName]
-        }
-        def newList = [id: it.id, name: it.displayName, suppCapab: it.capabilities.collect {
-            "$it.name"
-        }, suppAttributes: it.supportedAttributes.collect {
-            "$it.name"      
-        }, suppCommands: it.supportedCommands.collect {
-            "$it.name"      
-        }]
-
-        return newList
-    }
-    switches?.each {
-      list[currId].devices[it.id] = setValues(it)
-    }
-    thermostats?.each {
-      list[currId].devices[it.id] = setValues(it)
-    }
-    windowShades?.each {
-      list[currId].devices[it.id] = setValues(it)
-    }
-
-    return list
-
-}
-/*  This function returns all of the current values of the specified Devices attributes */
-def acquiredata() {
-	def resp = [:]
-    if (!params.id) {
-    	httpError(400, "invalid id $params.id")
-        return
-    }
-    def dev = switches.find() { it.id == params.id } ?: windowShades.find() { it.id == params.id } ?:
-    	thermostats.find() { it.id == params.id }    
-   
-    if (!dev) {
-    	httpError(400, "invalid id $params.id")
-        return    
-    }
-    def att = dev.supportedAttributes
-    att.each {
-    	resp[it.name] = dev.currentValue("$it.name")
-    }
-    return resp
-}
-
-void updateSwitch() {
-    // use the built-in request object to get the command parameter
-    def command = params.command
-	def sw = switches.find() { it.id == params.id }
-    if (!sw) {
-    	httpError(400, "invalid id $params.id")
-        return
-    }
-    switch(command) {
-        case "on":
-        	if ( sw.currentSwitch != "on" ) {
-            	sw.on()
-            }
-            break
-        case "off":
-        	if ( sw.currentSwitch != "off" ) {
-            	sw.off()
-            }
-            break
-        default:
-            httpError(400, "$command is not a valid")
-    }
-}
-
-
-void updateThermostat() {
-    // use the built-in request object to get the command parameter
-    def command = params.command
-	def therm = thermostats.find() { it.id == params.id }
-    if (!therm || !command) {
-    	httpError(400, "invalid id $params.id")
-        return
-    }
-    def passComm = [
-        "off",
-        "heat",
-        "emergencyHeat",
-        "cool",
-        "fanOn",
-        "fanAuto",
-        "fanCirculate",
-        "auto"
-
-	]
-    def passNumParamComm = [
-    	"setHeatingSetpoint",
-    	"setCoolingSetpoint",   
-    ]
-    def passStringParamComm = [
-        "setThermostatMode",
-        "setThermostatFanMode",
-	]
-    if (command in passComm) {
-    	therm."$command"()	
-    } else if (command in passNumParamComm && params.p1 && params.p1.isFloat()) {
-    	therm."$command"(Float.parseFloat(params.p1))	
-    } else if (command in passStringParamComm && params.p1) {
-    	therm."$command"(params.p1)	
-    } else {
-    	httpError(400, "$command is not a valid command")
-    }
-}
-
-void updateWindowShade() {
-    // use the built-in request object to get the command parameter
-    def command = params.command
-	def ws = windowShades.find() { it.id == params.id }
-    if (!ws || !command) {
-    	httpError(400, "invalid id $params.id")
-        return
-    }
-    def passComm = [
-		"open",
-        "close",
-        "presetPosition",
-	]
-    if (command in passComm) {
-    	ws."$command"()		
-    } else {
-    	httpError(400, "$command is not a valid command")
-    }
-}
-// TODO: implement event handlers

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -4,33 +4,29 @@
 import java.text.DecimalFormat
 import groovy.json.JsonSlurper
 
-private getApiUrl()			{ "https://api.netatmo.com" }
-private getVendorName()		{ "netatmo" }
-private getVendorAuthPath()	{ "${apiUrl}/oauth2/authorize?" }
-private getVendorTokenPath(){ "${apiUrl}/oauth2/token" }
+private apiUrl() 			{ "https://api.netatmo.com" }
+private getVendorName() 	{ "netatmo" }
+private getVendorAuthPath()	{ "https://api.netatmo.com/oauth2/authorize?" }
+private getVendorTokenPath(){ "https://api.netatmo.com/oauth2/token" }
 private getVendorIcon()		{ "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png" }
-private getClientId()		{ appSettings.clientId }
-private getClientSecret()	{ appSettings.clientSecret }
-private getServerUrl() 		{ appSettings.serverUrl }
-private getShardUrl()		{ return getApiServerUrl() }
-private getCallbackUrl()	{ "${serverUrl}/oauth/callback" }
-private getBuildRedirectUrl() { "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${shardUrl}" }
+private getClientId() 		{ appSettings.clientId }
+private getClientSecret() 	{ appSettings.clientSecret }
+private getServerUrl() 		{ "https://graph.api.smartthings.com" }
 
 // Automatically generated. Make future change here.
 definition(
-	name: "Netatmo (Connect)",
-	namespace: "dianoga",
-	author: "Brian Steere",
-	description: "Netatmo Integration",
-	category: "SmartThings Labs",
-	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1.png",
-	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png",
-	oauth: true,
-	singleInstance: true
+    name: "Netatmo (Connect)",
+    namespace: "dianoga",
+    author: "Brian Steere",
+    description: "Netatmo Integration",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png",
+    oauth: true,
+    singleInstance: true
 ){
 	appSetting "clientId"
 	appSetting "clientSecret"
-	appSetting "serverUrl"
 }
 
 preferences {
@@ -39,52 +35,35 @@ preferences {
 }
 
 mappings {
-	path("/oauth/initialize") {action: [GET: "oauthInitUrl"]}
-	path("/oauth/callback") {action: [GET: "callback"]}
+	path("/receivedToken"){action: [POST: "receivedToken", GET: "receivedToken"]}
+	path("/receiveToken"){action: [POST: "receiveToken", GET: "receiveToken"]}
+    path("/auth"){action: [GET: "auth"]}
 }
 
 def authPage() {
 	log.debug "In authPage"
+	if(canInstallLabs()) {
+		def description = null
 
-	def description
-	def uninstallAllowed = false
-	def oauthTokenProvided = false
+		if (state.vendorAccessToken == null) {
+			log.debug "About to create access token."
 
-	if (!state.accessToken) {
-		log.debug "About to create access token."
-		state.accessToken = createAccessToken()
-	}
+			createAccessToken()
+			description = "Tap to enter Credentials."
 
-	if (canInstallLabs()) {
-
-		def redirectUrl = getBuildRedirectUrl()
-		log.debug "Redirect url = ${redirectUrl}"
-
-		if (state.authToken) {
+			return dynamicPage(name: "Credentials", title: "Authorize Connection", nextPage:"listDevices", uninstall: true, install:false) {
+				section { href url:buildRedirectUrl("auth"), style:"embedded", required:false, title:"Connect to ${getVendorName()}:", description:description }
+			}
+		} else {
 			description = "Tap 'Next' to proceed"
-			uninstallAllowed = true
-			oauthTokenProvided = true
-		} else {
-			description = "Click to enter Credentials."
-		}
 
-		if (!oauthTokenProvided) {
-			log.debug "Show the login page"
-			return dynamicPage(name: "Credentials", title: "Authorize Connection", nextPage:"listDevices", uninstall: uninstallAllowed, install:false) {
-				section() {
-					paragraph "Tap below to log in to the netatmo and authorize SmartThings access."
-					href url:redirectUrl, style:"embedded", required:false, title:"Connect to ${getVendorName()}:", description:description
-				}
-			}
-		} else {
-			log.debug "Show the devices page"
-			return dynamicPage(name: "Credentials", title: "Credentials Accepted!", nextPage:"listDevices", uninstall: uninstallAllowed, install:false) {
-				section() {
-					input(name:"Devices", style:"embedded", required:false, title:"${getVendorName()} is now connected to SmartThings!", description:description) 
-				}
+			return dynamicPage(name: "Credentials", title: "Credentials Accepted!", nextPage:"listDevices", uninstall: true, install:false) {
+				section { href url: buildRedirectUrl("receivedToken"), style:"embedded", required:false, title:"${getVendorName()} is now connected to SmartThings!", description:description }
 			}
 		}
-	} else {
+	}
+	else
+	{
 		def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date.
 
 To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
@@ -99,184 +78,44 @@ To update your Hub, access Location Settings in the Main Menu (tap the gear next
 	}
 }
 
+def auth() {
+	redirect location: oauthInitUrl()
+}
+
 def oauthInitUrl() {
 	log.debug "In oauthInitUrl"
 
+	/* OAuth Step 1: Request access code with our client ID */
+
 	state.oauthInitState = UUID.randomUUID().toString()
 
-	def oauthParams = [
-		response_type: "code",
+	def oauthParams = [ response_type: "code",
 		client_id: getClientId(),
-		client_secret: getClientSecret(),
 		state: state.oauthInitState,
-		redirect_uri: getCallbackUrl(),
+		redirect_uri: buildRedirectUrl("receiveToken") ,
 		scope: "read_station"
-	]
-
-	log.debug "REDIRECT URL: ${getVendorAuthPath() + toQueryString(oauthParams)}"
-
-	redirect (location: getVendorAuthPath() + toQueryString(oauthParams))
-}
-
-def callback() {
-	log.debug "callback()>> params: $params, params.code ${params.code}"
-
-	def code = params.code
-	def oauthState = params.state
-
-	if (oauthState == state.oauthInitState) {
-
-		def tokenParams = [
-			client_secret: getClientSecret(),
-			client_id : getClientId(),
-			grant_type: "authorization_code",
-			redirect_uri: getCallbackUrl(),
-			code: code,
-			scope: "read_station"
 		]
 
-		log.debug "TOKEN URL: ${getVendorTokenPath() + toQueryString(tokenParams)}"
-
-		def tokenUrl = getVendorTokenPath()
-		def params = [
-			uri: tokenUrl,
-			contentType: 'application/x-www-form-urlencoded',
-			body: tokenParams
-		]
-
-		log.debug "PARAMS: ${params}"
-
-		httpPost(params) { resp ->
-
-			def slurper = new JsonSlurper()
-
-			resp.data.each { key, value ->
-				def data = slurper.parseText(key)
-
-				state.refreshToken = data.refresh_token
-				state.authToken = data.access_token
-				state.tokenExpires = now() + (data.expires_in * 1000)
-				log.debug "swapped token: $resp.data"
-			}
-		}
-
-		// Handle success and failure here, and render stuff accordingly
-		if (state.authToken) {
-			success()
-		} else {
-			fail()
-		}
-
-	} else {
-		log.error "callback() failed oauthState != state.oauthInitState"
-	}
+	return getVendorAuthPath() + toQueryString(oauthParams)
 }
 
-def success() {
-	log.debug "in success"
-	def message = """
-	<p>We have located your """ + getVendorName() + """ account.</p>
-	<p>Tap 'Done' to continue to Devices.</p>
-	"""
-	connectionStatus(message)
+def buildRedirectUrl(endPoint) {
+	log.debug "In buildRedirectUrl"
+
+	return getServerUrl() + "/api/token/${state.accessToken}/smartapps/installations/${app.id}/${endPoint}"
 }
 
-def fail() {
-	log.debug "in fail"
-	def message = """
-	<p>The connection could not be established!</p>
-	<p>Click 'Done' to return to the menu.</p>
-	"""
-	connectionStatus(message)
-}
-
-def connectionStatus(message, redirectUrl = null) {
-	def redirectHtml = ""
-	if (redirectUrl) {
-		redirectHtml = """
-			<meta http-equiv="refresh" content="3; url=${redirectUrl}" />
-		"""
-	}
-
-	def html = """
-		<!DOCTYPE html>
-		<html>
-		<head>
-		<meta name="viewport" content="width=device-width, initial-scale=1">
-		<title>${getVendorName()} Connection</title>
-		<style type="text/css">
-			* { box-sizing: border-box; }
-			@font-face {
-				font-family: 'Swiss 721 W01 Thin';
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
-				font-weight: normal;
-				font-style: normal;
-			}
-			@font-face {
-				font-family: 'Swiss 721 W01 Light';
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
-				font-weight: normal;
-				font-style: normal;
-			}
-			.container {
-				width: 100%;
-				padding: 40px;
-				/*background: #eee;*/
-				text-align: center;
-			}
-			img {
-				vertical-align: middle;
-			}
-			img:nth-child(2) {
-				margin: 0 30px;
-			}
-			p {
-				font-size: 2.2em;
-				font-family: 'Swiss 721 W01 Thin';
-				text-align: center;
-				color: #666666;
-				margin-bottom: 0;
-			}
-			/*
-			p:last-child {
-				margin-top: 0px;
-			}
-			*/
-			span {
-				font-family: 'Swiss 721 W01 Light';
-				}
-		</style>
-		</head>
-		<body>
-			<div class="container">
-				<img src=""" + getVendorIcon() + """ alt="Vendor icon" />
-				<img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
-				<img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
-				${message}
-			</div>
-        </body>
-        </html>
-	"""
-	render contentType: 'text/html', data: html
-}
-
-def refreshToken() {
-	log.debug "In refreshToken"
+def receiveToken() {
+	log.debug "In receiveToken"
 
 	def oauthParams = [
 		client_secret: getClientSecret(),
 		client_id: getClientId(),
-		grant_type: "refresh_token",
-		refresh_token: state.refreshToken
-	]
+		grant_type: "authorization_code",
+		redirect_uri: buildRedirectUrl('receiveToken'),
+		code: params.code,
+		scope: "read_station"
+		]
 
 	def tokenUrl = getVendorTokenPath()
 	def params = [
@@ -285,7 +124,201 @@ def refreshToken() {
 		body: oauthParams,
 	]
 
-	// OAuth Step 2: Request access token with our client Secret and OAuth "Code"
+    log.debug params
+
+	/* OAuth Step 2: Request access token with our client Secret and OAuth "Code" */
+	try {
+		httpPost(params) { response ->
+        	log.debug response.data
+			def slurper = new JsonSlurper();
+
+			response.data.each {key, value ->
+				def data = slurper.parseText(key);
+				log.debug "Data: $data"
+
+				state.vendorRefreshToken = data.refresh_token
+				state.vendorAccessToken = data.access_token
+				state.vendorTokenExpires = now() + (data.expires_in * 1000)
+				return
+			}
+
+		}
+	} catch (Exception e) {
+		log.debug "Error: $e"
+	}
+
+	log.debug "State: $state"
+
+	if ( !state.vendorAccessToken ) {  //We didn't get an access token, bail on install
+		return
+	}
+
+	/* OAuth Step 3: Use the access token to call into the vendor API throughout your code using state.vendorAccessToken. */
+
+	def html = """
+        <!DOCTYPE html>
+        <html>
+        <head>
+        <meta name="viewport" content="width=device-width, initial-scale=1">
+        <title>${getVendorName()} Connection</title>
+        <style type="text/css">
+            * { box-sizing: border-box; }
+            @font-face {
+                font-family: 'Swiss 721 W01 Thin';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            @font-face {
+                font-family: 'Swiss 721 W01 Light';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            .container {
+                width: 100%;
+                padding: 40px;
+                /*background: #eee;*/
+                text-align: center;
+            }
+            img {
+                vertical-align: middle;
+            }
+            img:nth-child(2) {
+                margin: 0 30px;
+            }
+            p {
+                font-size: 2.2em;
+                font-family: 'Swiss 721 W01 Thin';
+                text-align: center;
+                color: #666666;
+                margin-bottom: 0;
+            }
+        /*
+            p:last-child {
+                margin-top: 0px;
+            }
+        */
+            span {
+                font-family: 'Swiss 721 W01 Light';
+            }
+        </style>
+        </head>
+        <body>
+            <div class="container">
+                <img src=""" + getVendorIcon() + """ alt="Vendor icon" />
+                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
+                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
+                <p>We have located your """ + getVendorName() + """ account.</p>
+                <p>Tap 'Done' to process your credentials.</p>
+			</div>
+        </body>
+        </html>
+        """
+	render contentType: 'text/html', data: html
+}
+
+def receivedToken() {
+	log.debug "In receivedToken"
+
+	def html = """
+        <!DOCTYPE html>
+        <html>
+        <head>
+        <meta name="viewport" content="width=device-width, initial-scale=1">
+        <title>Withings Connection</title>
+        <style type="text/css">
+            * { box-sizing: border-box; }
+            @font-face {
+                font-family: 'Swiss 721 W01 Thin';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            @font-face {
+                font-family: 'Swiss 721 W01 Light';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            .container {
+                width: 560px;
+                padding: 40px;
+                /*background: #eee;*/
+                text-align: center;
+            }
+            img {
+                vertical-align: middle;
+            }
+            img:nth-child(2) {
+                margin: 0 30px;
+            }
+            p {
+                font-size: 2.2em;
+                font-family: 'Swiss 721 W01 Thin';
+                text-align: center;
+                color: #666666;
+                margin-bottom: 0;
+            }
+        /*
+            p:last-child {
+                margin-top: 0px;
+            }
+        */
+            span {
+                font-family: 'Swiss 721 W01 Light';
+            }
+        </style>
+        </head>
+        <body>
+            <div class="container">
+                <img src=""" + getVendorIcon() + """ alt="Vendor icon" />
+                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
+                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
+                <p>Tap 'Done' to continue to Devices.</p>
+			</div>
+        </body>
+        </html>
+        """
+	render contentType: 'text/html', data: html
+}
+
+// "
+
+def refreshToken() {
+	log.debug "In refreshToken"
+
+	def oauthParams = [
+		client_secret: getClientSecret(),
+		client_id: getClientId(),
+		grant_type: "refresh_token",
+		refresh_token: state.vendorRefreshToken
+		]
+
+	def tokenUrl = getVendorTokenPath()
+	def params = [
+		uri: tokenUrl,
+		contentType: 'application/x-www-form-urlencoded',
+		body: oauthParams,
+	]
+
+	/* OAuth Step 2: Request access token with our client Secret and OAuth "Code" */
 	try {
 		httpPost(params) { response ->
 			def slurper = new JsonSlurper();
@@ -294,9 +327,9 @@ def refreshToken() {
 				def data = slurper.parseText(key);
 				log.debug "Data: $data"
 
-				state.refreshToken = data.refresh_token
-				state.accessToken = data.access_token
-				state.tokenExpires = now() + (data.expires_in * 1000)
+				state.vendorRefreshToken = data.refresh_token
+				state.vendorAccessToken = data.access_token
+				state.vendorTokenExpires = now() + (data.expires_in * 1000)
 				return true
 			}
 
@@ -305,8 +338,9 @@ def refreshToken() {
 		log.debug "Error: $e"
 	}
 
-	// We didn't get an access token
-	if ( !state.accessToken ) {
+	log.debug "State: $state"
+
+	if ( !state.vendorAccessToken ) {  //We didn't get an access token
 		return false
 	}
 }
@@ -337,10 +371,10 @@ def initialize() {
 
 	settings.devices.each {
 		def deviceId = it
-		def detail = state?.deviceDetail[deviceId]
+		def detail = state.deviceDetail[deviceId]
 
 		try {
-			switch(detail?.type) {
+			switch(detail.type) {
 				case 'NAMain':
 					log.debug "Base station"
 					createChildDevice("Netatmo Basestation", deviceId, "${detail.type}.${deviceId}", detail.module_name)
@@ -448,13 +482,13 @@ def listDevices() {
 }
 
 def apiGet(String path, Map query, Closure callback) {
-	if(now() >= state.tokenExpires) {
+	if(now() >= state.vendorTokenExpires) {
 		refreshToken();
 	}
 
-	query['access_token'] = state.accessToken
+	query['access_token'] = state.vendorAccessToken
 	def params = [
-		uri: getApiUrl(),
+		uri: apiUrl(),
 		path: path,
 		'query': query
 	]
@@ -487,12 +521,12 @@ def poll() {
     log.debug "State: ${state.deviceState}"
 
 	settings.devices.each { deviceId ->
-		def detail = state?.deviceDetail[deviceId]
-		def data = state?.deviceState[deviceId]
-		def child = children?.find { it.deviceNetworkId == deviceId }
+		def detail = state.deviceDetail[deviceId]
+		def data = state.deviceState[deviceId]
+		def child = children.find { it.deviceNetworkId == deviceId }
 
 		log.debug "Update: $child";
-		switch(detail?.type) {
+		switch(detail.type) {
 			case 'NAMain':
 				log.debug "Updating NAMain $data"
 				child?.sendEvent(name: 'temperature', value: cToPref(data['Temperature']) as float, unit: getTemperatureScale())

smartapps/docwisdom/humidity-alert.src/humidity-alert.groovy

@@ -78,7 +78,7 @@ def humidityHandler(evt) {
 			log.debug "Notification already sent within the last ${deltaMinutes} minutes"
 			
 		} else {
-			log.debug "Humidity Rose Above ${tooHumid}:  sending SMS and activating ${mySwitch}"
+			log.debug "Humidity Rose Above ${tooHumid}:  sending SMS to $phone1 and activating ${mySwitch}"
 			send("${humiditySensor1.label} sensed high humidity level of ${evt.value}")
 			switch1?.on()
 		}
@@ -91,7 +91,7 @@ def humidityHandler(evt) {
 			log.debug "Notification already sent within the last ${deltaMinutes} minutes"
 			
 		} else {
-			log.debug "Humidity Fell Below ${notHumidEnough}:  sending SMS and activating ${mySwitch}"
+			log.debug "Humidity Fell Below ${notHumidEnough}:  sending SMS to $phone1 and activating ${mySwitch}"
 			send("${humiditySensor1.label} sensed high humidity level of ${evt.value}")
 			switch1?.off()
 		}

smartapps/dooglave/let-there-be-dark.src/let-there-be-dark.groovy

@@ -25,11 +25,15 @@ preferences {
 
 def installed() {
 	subscribe(contact1, "contact", contactHandler)
+	subscribe(switch1, "switch.on", switchOnHandler)
+    subscribe(switch1, "switch.off", switchOffHandler)
 }
 
 def updated() {
 	unsubscribe()
 	subscribe(contact1, "contact", contactHandler)
+	subscribe(switch1, "switch.on", switchOnHandler)
+    subscribe(switch1, "switch.off", switchOffHandler)
 }
 
 def contactHandler(evt) {
@@ -42,4 +46,4 @@ def contactHandler(evt) {
 if (evt.value == "closed") {
 	if(state.wasOn)switch1.on()
 }
-}
+}

smartapps/osotech/plantlink-connector.src/plantlink-connector.groovy

@@ -370,7 +370,9 @@ def parse_api_response(resp, message) {
     }
 }
 
-def getServerUrl() { return getApiServerUrl() }
+def getServerUrl() { 
+	return "https://graph.api.smartthings.com" 
+}
 
 def debugEvent(message, displayEvent) {
     def results = [

smartapps/roomieremote-roomieconnect/simple-control.src/simple-control.groovy

@@ -21,12 +21,6 @@ preferences()
 	section("Allow Simple Control to Monitor and Control These Things...")
     {
     	input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
-    	input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-        input "thermostats", "capability.thermostat", title: "Which Thermostats?", multiple: true, required: false
-        input "doorControls", "capability.doorControl", title: "Which Door Controls?", multiple: true, required: false
-        input "colorControls", "capability.colorControl", title: "Which Color Controllers?", multiple: true, required: false
-        input "musicPlayers", "capability.musicPlayer", title: "Which Music Players?", multiple: true, required: false
-        input "switchLevels", "capability.switchLevel", title: "Which Adjustable Switches?", multiple: true, required: false
   	}
 	
 	page(name: "mainPage", title: "Simple Control Setup", content: "mainPage", refreshTimeout: 5)
@@ -37,17 +31,12 @@ preferences()
 
 mappings {
 	path("/devices") {
-    	action: [
-        	GET: "getDevices"
-        ]
-	}
-    path("/:deviceType/devices") {
     	action: [
         	GET: "getDevices",
             POST: "handleDevicesWithIDs"
         ]
-    }
-    path("/device/:deviceType/:id") {
+	}
+    path("/device/:id") {
     	action: [
         	GET: "getDevice",
             POST: "updateDevice"
@@ -104,40 +93,33 @@ def handleDevicesWithIDs()
     //log.debug("ids: ${ids}")
     def command = data?.command
 	def arguments = data?.arguments
-	def type = params?.deviceType
-    //log.debug("device type: ${type}")
     if (command)
     {
-    	def statusCode = 404
+    	def success = false
 	    //log.debug("command ${command}, arguments ${arguments}")
     	for (devId in ids)
         {
 			def device = allDevices.find { it.id == devId }
-            //log.debug("device: ${device}")
-			// Check if we have a device that responds to the specified command
-			if (validateCommand(device, type, command)) {
-            	if (arguments) {
+			if (device) {
+				if (arguments) {
 					device."$command"(*arguments)
-                }
-                else {
-                	device."$command"()
-                }
-				statusCode = 200
+				} else {
+					device."$command"()
+				}
+				success = true
 			} else {
-            	statusCode = 403
+            	//log.debug("device not found ${devId}")
 			}
 		}
-        def responseData = "{}"
-        switch (statusCode)
+        
+        if (success)
         {
-        	case 403:
-            	responseData = '{"msg": "Access denied. This command is not supported by current capability."}'
-                break
-			case 404:
-            	responseData = '{"msg": "Device not found"}'
-                break
+        	render status: 200, data: "{}"
+        }
+        else
+        {
+        	render status: 404, data: '{"msg": "Device not found"}'
         }
-        render status: statusCode, data: responseData
     }
     else
     {
@@ -182,101 +164,25 @@ def updateDevice()
 	def data = request.JSON
 	def command = data?.command
 	def arguments = data?.arguments
-	def type = params?.deviceType
-    //log.debug("device type: ${type}")
 
 	//log.debug("updateDevice, params: ${params}, request: ${data}")
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
-		def statusCode = 404
 		def device = allDevices.find { it.id == params.id }
 		if (device) {
-			// Check if we have a device that responds to the specified command
-			if (validateCommand(device, type, command)) {
-	        	if (arguments) {
-					device."$command"(*arguments)
-	            }
-	            else {
-	            	device."$command"()
-	            }
-				statusCode = 200
+			if (arguments) {
+				device."$command"(*arguments)
 			} else {
-	        	statusCode = 403
+				device."$command"()
 			}
+			render status: 204, data: "{}"
+		} else {
+			render status: 404, data: '{"msg": "Device not found"}'
 		}
-		
-	    def responseData = "{}"
-	    switch (statusCode)
-	    {
-	    	case 403:
-	        	responseData = '{"msg": "Access denied. This command is not supported by current capability."}'
-	            break
-			case 404:
-	        	responseData = '{"msg": "Device not found"}'
-	            break
-	    }
-	    render status: statusCode, data: responseData
 	}
 }
 
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, deviceType, command) {
-	//log.debug("validateCommand ${command}")
-    def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-    //log.debug("capabilityCommands: ${capabilityCommands}")
-	def currentDeviceCapability = getCapabilityName(deviceType)
-    //log.debug("currentDeviceCapability: ${currentDeviceCapability}")
-	if (capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
-	}
-}
-
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(type) {
-    switch(type) {
-		case "switches":
-			return "Switch"
-		case "locks":
-			return "Lock"
-        case "thermostats":
-        	return "Thermostat"
-        case "doorControls":
-        	return "Door Control"
-        case "colorControls":
-        	return "Color Control"
-        case "musicPlayers":
-        	return "Music Player"
-        case "switchLevels":
-        	return "Switch Level"
-		default:
-			return type
-	}
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
 def listSubscriptions()
 {
 	//log.debug "listSubscriptions()"
@@ -455,13 +361,7 @@ def agentDiscovery(params=[:])
         }
         section("Allow Simple Control to Monitor and Control These Things...")
         {
-			input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
-			input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-			input "thermostats", "capability.thermostat", title: "Which Thermostats?", multiple: true, required: false
-			input "doorControls", "capability.doorControl", title: "Which Door Controls?", multiple: true, required: false
-			input "colorControls", "capability.colorControl", title: "Which Color Controllers?", multiple: true, required: false
-			input "musicPlayers", "capability.musicPlayer", title: "Which Music Players?", multiple: true, required: false
-			input "switchLevels", "capability.switchLevel", title: "Which Adjustable Switches?", multiple: true, required: false
+	    	input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
 	  	}
     }
 }
@@ -772,3 +672,5 @@ def List getRealHubFirmwareVersions()
 }
 
 
+
+

smartapps/sheikhsphere/smart-humidifier.src/smart-humidifier.groovy

@@ -77,7 +77,7 @@ def humidityHandler(evt) {
 
 		} else {
          	if (state.lastStatus != "off") {
-                log.debug "Humidity Rose Above $humidityHigh1:  sending SMS and deactivating $mySwitch"
+                log.debug "Humidity Rose Above $humidityHigh1:  sending SMS to $phone1 and deactivating $mySwitch"
                 send("${humiditySensor1.label} sensed high humidity level of ${evt.value}, turning off ${switch1.label}")
                 switch1?.off()
                 state.lastStatus = "off"
@@ -99,7 +99,7 @@ def humidityHandler(evt) {
 
 		} else {
         	if (state.lastStatus != "on") {
-                log.debug "Humidity Dropped Below $humidityLow1:  sending SMS and activating $mySwitch"
+                log.debug "Humidity Dropped Below $humidityLow1:  sending SMS to $phone1 and activating $mySwitch"
                 send("${humiditySensor1.label} sensed low humidity level of ${evt.value}, turning on ${switch1.label}")
                 switch1?.on()
                 state.lastStatus = "on"
@@ -125,4 +125,4 @@ private send(msg) {
     }
 
     log.debug msg
-}
+}

smartapps/smartthings/button-controller.src/button-controller.groovy

@@ -297,8 +297,8 @@ private getTimeOk() {
 	def result = true
 	if (starting && ending) {
 		def currTime = now()
-		def start = timeToday(starting, location.timeZone).time
-		def stop = timeToday(ending, location.timeZone).time
+		def start = timeToday(starting).time
+		def stop = timeToday(ending).time
 		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
 	}
 	log.trace "timeOk = $result"

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -39,7 +39,6 @@ preferences {
 	page(name: "completionPage")
 	page(name: "numbersPage")
 	page(name: "controllerExplanationPage")
-	page(name: "unsupportedDevicesPage")
 }
 
 def rootPage() {
@@ -48,9 +47,6 @@ def rootPage() {
 		section("What to dim") {
 			input(name: "dimmers", type: "capability.switchLevel", title: "Dimmers", description: null, multiple: true, required: true, submitOnChange: true)
 			if (dimmers) {
-				if (dimmersContainUnsupportedDevices()) {
-					href(name: "toUnsupportedDevicesPage", page: "unsupportedDevicesPage", title: "Some of your selected dimmers don't seem to be supported", description: "Tap here to fix it", required: true)
-				}
 				href(name: "toNumbersPage", page: "numbersPage", title: "Duration & Direction", description: numbersPageHrefDescription(), state: "complete")
 			}
 		}
@@ -75,31 +71,6 @@ def rootPage() {
 	}
 }
 
-def unsupportedDevicesPage() {
-
-	def unsupportedDimmers = dimmers.findAll { !hasSetLevelCommand(it) }
-
-	dynamicPage(name: "unsupportedDevicesPage") {
-		if (unsupportedDimmers) {
-			section("These devices do not support the setLevel command") {
-				unsupportedDimmers.each {
-					paragraph deviceLabel(it)
-				}
-			}
-			section {
-				input(name: "dimmers", type: "capability.sensor", title: "Please remove the above devices from this list.", submitOnChange: true, multiple: true)
-			}
-			section {
-				paragraph "If you think there is a mistake here, please contact support."
-			}
-		} else {
-			section {
-				paragraph "You're all set. You can hit the back button, now. Thanks for cleaning up your settings :)"
-			}
-		}
-	}
-}
-
 def controllerExplanationPage() {
 	dynamicPage(name: "controllerExplanationPage", title: "How To Control Gentle Wake Up") {
 
@@ -237,7 +208,7 @@ def completionPage() {
 		}
 
 		section("Notifications") {
-			input("recipients", "contact", title: "Send notifications to", required: false) {
+			input("recipients", "contact", title: "Send notifications to") {
 				input(name: "completionPhoneNumber", type: "phone", title: "Text This Number", description: "Phone number", required: false)
 				input(name: "completionPush", type: "bool", title: "Send A Push Notification", description: "Phone number", required: false)
 			}
@@ -557,16 +528,14 @@ def updateDimmers(percentComplete) {
 		} else {
 
 			def shouldChangeColors = (colorize && colorize != "false")
+			def canChangeColors = hasSetColorCommand(dimmer)
 
-			if (shouldChangeColors && hasSetColorCommand(dimmer)) {
-				def hue = getHue(dimmer, nextLevel)
-				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel} and hue to ${hue}"
-				dimmer.setColor([hue: hue, saturation: 100, level: nextLevel])
-			} else if (hasSetLevelCommand(dimmer)) {
-				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel}"
-				dimmer.setLevel(nextLevel)
+			log.debug "Setting ${deviceLabel(dimmer)} to ${nextLevel}"
+
+			if (shouldChangeColors && canChangeColors) {
+				dimmer.setColor([hue: getHue(dimmer, nextLevel), saturation: 100, level: nextLevel])
 			} else {
-				log.warn "${deviceLabel(dimmer)} does not have setColor or setLevel commands."
+				dimmer.setLevel(nextLevel)
 			}
 
 		}
@@ -720,7 +689,7 @@ def completionPercentage() {
 
 	def now = new Date().getTime()
 	def timeElapsed = now - atomicState.start
-	def totalRunTime = totalRunTimeMillis() ?: 1
+	def totalRunTime = totalRunTimeMillis()
 	def percentComplete = timeElapsed / totalRunTime * 100
 	log.debug "percentComplete: ${percentComplete}"
 
@@ -848,21 +817,24 @@ private getRedHue(level) {
 	if (level >= 96) return 17
 }
 
-private dimmersContainUnsupportedDevices() {
-	def found = dimmers.find { hasSetLevelCommand(it) == false }
-	return found != null
-}
-
 private hasSetLevelCommand(device) {
-	return hasCommand(device, "setLevel")
+	def isDimmer = false
+	device.supportedCommands.each {
+		if (it.name.contains("setLevel")) {
+			isDimmer = true
+		}
+	}
+	return isDimmer
 }
 
 private hasSetColorCommand(device) {
-	return hasCommand(device, "setColor")
-}
-
-private hasCommand(device, String command) {
-	return (device.supportedCommands.find { it.name == command } != null)
+	def hasColor = false
+	device.supportedCommands.each {
+		if (it.name.contains("setColor")) {
+			hasColor = true
+		}
+	}
+	return hasColor
 }
 
 private dimmersWithSetColorCommand() {
@@ -1101,4 +1073,4 @@ def hasStartLevel() {
 
 def hasEndLevel() {
 	return (endLevel != null && endLevel != "")
-}
+}

smartapps/smartthings/has-barkley-been-fed.src/has-barkley-been-fed.groovy

@@ -68,7 +68,7 @@ def scheduleCheck()
             sendNotificationToContacts("No one has fed the dog", recipients)
         }
         else {
-            log.debug "Feeder was not opened since $midnight, texting one phone number"
+            log.debug "Feeder was not opened since $midnight, texting $phone1"
             sendSms(phone1, "No one has fed the dog")
         }
 	}

smartapps/smartthings/ifttt.src/ifttt.groovy

@@ -131,69 +131,19 @@ def update() {
 	def type = params.deviceType
 	def data = request.JSON
 	def devices = settings[type]
-	def device = settings[type]?.find { it.id == params.id }
 	def command = data.command
 
 	log.debug "[PROD] update, params: ${params}, request: ${data}, devices: ${devices*.id}"
-	
-	if (!device) {
-		httpError(404, "Device not found")
-	} 
-	
-	if (validateCommand(device, type, command)) {
-		device."$command"()
-	} else {
-		httpError(403, "Access denied. This command is not supported by current capability.")
+	if (command) {
+		def device = devices?.find { it.id == params.id }
+		if (!device) {
+			httpError(404, "Device not found")
+		} else {
+			device."$command"()
+		}
 	}
 }
 
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, deviceType, command) {
-	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-	def currentDeviceCapability = getCapabilityName(deviceType)
-	if (capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
-	}
-}
-
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(type) {
-    switch(type) {
-		case "switches":
-			return "Switch"
-		case "alarms":
-			return "Alarm"
-		case "locks":
-			return "Lock"
-		default:
-			return type
-	}
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
-
 def show() {
 	def type = params.deviceType
 	def devices = settings[type]

smartapps/smartthings/its-too-cold.src/its-too-cold.groovy

@@ -69,12 +69,11 @@ def temperatureHandler(evt) {
 		def alreadySentSms = recentEvents.count { it.doubleValue <= tooCold } > 1
 
 		if (alreadySentSms) {
-			log.debug "SMS already sent within the last $deltaMinutes minutes"
+			log.debug "SMS already sent to $phone1 within the last $deltaMinutes minutes"
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
-			log.debug "Temperature dropped below $tooCold:  sending SMS and activating $mySwitch"
-			def tempScale = location.temperatureScale ?: "F"
-			send("${temperatureSensor1.displayName} is too cold, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
+			log.debug "Temperature dropped below $tooCold:  sending SMS to $phone1 and activating $mySwitch"
+			send("${temperatureSensor1.displayName} is too cold, reporting a temperature of ${evt.value}${evt.unit?:"F"}")
 			switch1?.on()
 		}
 	}

smartapps/smartthings/its-too-hot.src/its-too-hot.groovy

@@ -73,8 +73,7 @@ def temperatureHandler(evt) {
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
 			log.debug "Temperature rose above $tooHot:  sending SMS to $phone1 and activating $mySwitch"
-			def tempScale = location.temperatureScale ?: "F"
-			send("${temperatureSensor1.displayName} is too hot, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
+			send("${temperatureSensor1.displayName} is too hot, reporting a temperature of ${evt.value}${evt.unit?:"F"}")
 			switch1?.on()
 		}
 	}

smartapps/smartthings/life360-connect.src/life360-connect.groovy

@@ -27,6 +27,7 @@ definition(
 ) {
 	appSetting "clientId"
 	appSetting "clientSecret"
+    appSetting "serverUrl"
 }
 
 preferences {
@@ -191,7 +192,7 @@ def getSmartThingsClientId() {
    return "pREqugabRetre4EstetherufrePumamExucrEHuc"
 }
 
-def getServerUrl() { getApiServerUrl() }
+def getServerUrl() { appSettings.serverUrl }
 
 def buildRedirectUrl()
 {

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -339,7 +339,7 @@ def initialize() {
 	state.aux = 0
 	if (selectedhubs || selectedactivities) {
 		addDevice()
-        runEvery5Minutes("poll")
+        runEvery5Minutes("discovery")
 	}
 }
 
@@ -394,9 +394,9 @@ def discovery() {
         }
 	} catch (java.net.SocketTimeoutException e) {
 		log.warn "Connection to the hub timed out. Please restart the hub and try again."
-    state.resethub = true
+        state.resethub = true
  	} catch (e) {
-    log.info "Logitech Harmony - Error: $e"
+		log.warn "Hostname in certificate didn't match. Please try again later."
 	}
     return null
 }
@@ -474,7 +474,7 @@ def activity(dni,mode) {
 def poll() {
 	// GET THE LIST OF ACTIVITIES
     if (state.HarmonyAccessToken) {
-    	  getActivityList()
+    	getActivityList()
         def Params = [auth: state.HarmonyAccessToken]
         def url = "https://home.myharmony.com/cloudapi/state?${toQueryString(Params)}"
         try {
@@ -520,17 +520,14 @@ def poll() {
                 return "Poll completed $map - $state.hubs"
             }
         } catch (groovyx.net.http.HttpResponseException e) {
-              if (e.statusCode == 401) { // token is expired
-                  state.remove("HarmonyAccessToken")
-                  log.warn "Harmony Access token has expired"
-              }
-        } catch (java.net.SocketTimeoutException e) {
-        	log.warn "Connection to the hub timed out. Please restart the hub and try again."
-              state.resethub = true
-        } catch (e) {
-        	log.info "Logitech Harmony - Error: $e"
-        }
-    }
+            if (e.statusCode == 401) { // token is expired
+                state.remove("HarmonyAccessToken")
+                return "Harmony Access token has expired"
+            }
+		} catch(Exception e) {
+        	log.trace e
+		}
+	}
 }
 
 
@@ -658,73 +655,29 @@ def updateDevice() {
 	def data = request.JSON
 	def command = data.command
 	def arguments = data.arguments
+
 	log.debug "updateDevice, params: ${params}, request: ${data}"
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
 		def device = allDevices.find { it.id == params.id }
-    if (device) {
-        if (validateCommand(device, command)) {
-            if (arguments) {
-                device."$command"(*arguments)
-            } else {
-                device."$command"()
-            }
-            render status: 204, data: "{}"
-        } else {
-          render status: 403, data: '{"msg": "Access denied. This command is not supported by current capability."}'
-        }
-    } else {
-      render status: 404, data: '{"msg": "Device not found"}'
-    }
-  }
-}
-
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, command) {
-	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-	def currentDeviceCapability = getCapabilityName(device)
-	if (currentDeviceCapability != "" && capabilityCommands[currentDeviceCapability]) {
-    return (command in capabilityCommands[currentDeviceCapability] || (currentDeviceCapability == "Switch" && command == "setLevel" && device.hasCommand("setLevel"))) ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
+		if (device) {
+        	if (device.hasCommand("$command")) {
+                if (arguments) {
+                    device."$command"(*arguments)
+                } else {
+                    device."$command"()
+                }
+                render status: 204, data: "{}"
+           	} else {
+				render status: 404, data: '{"msg": "Command not supported by this Device"}'
+			}
+		} else {
+			render status: 404, data: '{"msg": "Device not found"}'
+		}
 	}
 }
 
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(device) {
-    def capName = ""
-    if (switches.find{it.id == device.id})
-			capName = "Switch"
-		else if (alarms.find{it.id == device.id})
-			capName = "Alarm"
-		else if (locks.find{it.id == device.id})
-			capName = "Lock"
-    log.trace "Device: $device - Capability Name: $capName"
-		return capName
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
 def listSubscriptions() {
 	log.debug "listSubscriptions()"
 	app.subscriptions?.findAll { it.device?.device && it.device.id }?.collect {
@@ -823,33 +776,18 @@ def deviceHandler(evt) {
 }
 
 def sendToHarmony(evt, String callbackUrl) {
-  def callback = new URI(callbackUrl)
-  if (callback.port != -1) {
-  	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
-  	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
-  	sendHubCommand(new physicalgraph.device.HubAction(
-  		method: "POST",
-  		path: path,
-  		headers: [
-  			"Host": host,
-  			"Content-Type": "application/json"
-  		],
-  		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
-  	))
-  } else {
-    def params = [
-      uri: callbackUrl,
-      body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
-    ]
-    try {
-        log.debug "Sending data to Harmony Cloud: $params"
-        httpPostJson(params) { resp ->
-            log.debug "Harmony Cloud - Response: ${resp.status}"
-        }
-    } catch (e) {
-        log.error "Harmony Cloud - Something went wrong: $e"
-    }
-  }
+	def callback = new URI(callbackUrl)
+	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
+	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
+	sendHubCommand(new physicalgraph.device.HubAction(
+		method: "POST",
+		path: path,
+		headers: [
+			"Host": host,
+			"Content-Type": "application/json"
+		],
+		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
+	))
 }
 
 def listHubs() {

smartapps/smartthings/turn-it-on-for-5-minutes.src/turn-it-on-for-5-minutes.groovy

@@ -53,4 +53,4 @@ def contactOpenHandler(evt) {
 
 def turnOffSwitch() {
 	switch1.off()
-}
+}

smartapps/smartthings/ubi.src/ubi.groovy

@@ -107,8 +107,8 @@ mappings {
 	path("/locks") {
 		action: [
 			GET: "listLocks",
-			PUT: "updateLocks",
-			POST: "updateLocks"
+			PUT: "updateLock",
+			POST: "updateLock"
 		]
 	}
 	path("/locks/:id") {
@@ -442,87 +442,31 @@ def executePhrase() {
 }
 
 private void updateAll(devices) {
-	def type = params.param1
 	def command = request.JSON?.command
-	if (!devices) {
-		httpError(404, "Devices not found")
-	}
-	if (command){
-		devices.each { device ->
-			executeCommand(device, type, command)
-		}
+	if (command)
+	{
+		command = command.toLowerCase()
+		devices."$command"()
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
-	def type = params.param1
-	def command = request.JSON?.command
-	def device = devices?.find { it.id == params.id }
-
-	if (!device) {
+	//def command = request.JSON?.command
+	def command = params.command
+	if (command)
+	{
+		command = command.toLowerCase()
+		def device = devices.find { it.id == params.id }
+		if (!device)
+		{
 			httpError(404, "Device not found")
+		}
+		else
+		{
+			device."$command"()
+		}
 	}
-
-	if (command) {
-		executeCommand(device, type, command)
-	}
-}
-
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, deviceType, command) {
-	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-	def currentDeviceCapability = getCapabilityName(deviceType)
-	if (capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
-	}
-}
-
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(type) {
-    switch(type) {
-		case "switches":
-			return "Switch"
-		case "locks":
-			return "Lock"
-		default:
-			return type
-	}
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
-/**
- * Validates and executes the command
- * on the device or devices
- */
-def executeCommand(device, type, command) {
-	if (validateCommand(device, type, command)) {
-		device."$command"()
-	} else {
-		httpError(403, "Access denied. This command is not supported by current capability.")
-	}	
 }
 
 private show(devices, type) {

smartapps/tslagle13/vacation-lighting-director.src/vacation-lighting-director.groovy

@@ -273,7 +273,7 @@ def scheduleCheck(evt) {
     else {
     	if(people){
         	//don't turn off lights if anyone is home
-        	if(someoneIsHome){
+        	if(someoneIsHome()){
         	    log.debug("Stopping Check for Light")
         	    unschedule()
         	}

smartapps/vlaminck/alfred-workflow.src/alfred-workflow.groovy

@@ -92,89 +92,24 @@ void updateLock() {
 
 private void updateAll(devices) {
 	def command = request.JSON?.command
-	def type = params.param1
-	if (!devices) {
-		httpError(404, "Devices not found")
-	}
-	
-	if (command){
-		devices.each { device ->
-			executeCommand(device, type, command)
-		}
+	if (command) {
+		devices."$command"()
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
 	def command = request.JSON?.command
-	def type = params.param1
-	def device = devices?.find { it.id == params.id }
-
-	if (!device) {
-		httpError(404, "Device not found")
-	}
-
 	if (command) {
-		executeCommand(device, type, command)
+		def device = devices.find { it.id == params.id }
+		if (!device) {
+			httpError(404, "Device not found")
+		} else {
+			device."$command"()
+		}
 	}
 }
 
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, deviceType, command) {
-	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-	def currentDeviceCapability = getCapabilityName(deviceType)
-	if (capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
-	}
-}
-
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(type) {
-    switch(type) {
-		case "switches":
-			return "Switch"
-		case "locks":
-			return "Lock"
-		default:
-			return type
-	}
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
-/**
- * Validates and executes the command
- * on the device or devices
- */
-def executeCommand(device, type, command) {
-	if (validateCommand(device, type, command)) {
-		device."$command"()
-	} else {
-		httpError(403, "Access denied. This command is not supported by current capability.")
-	}	
-}
-
 private show(devices, name) {
 	def device = devices.find { it.id == params.id }
 	if (!device) {