Z-Wave Plus Window Shade DVCSMP-1803

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -28,7 +28,6 @@ metadata {
 		attribute "powerSupply", "enum", ["USB Cable", "Battery"]
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
-		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A,0x5A"
 	}
 
 	simulator {
@@ -353,7 +352,7 @@ def configure() {
 									motionSensitivity == "minimum" ? 0 : 64)
 
 	//5. report every x minutes (threshold reports don't work on battery power, default 8 mins)
-	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: (8*60)) //association group 1
+	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: 8*60) //association group 1
 
 	request << zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 6*60*60)  //association group 2
 

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -21,8 +21,6 @@ metadata {
 		capability "Sensor"
 		capability "Battery"
 
-		command "configureAfterSecure"
-
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 	}
 

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -64,10 +64,8 @@ metadata {
     }
 
     standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
+        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff"
-        state "turningOff", label:'TURNING OFF', icon:"st.Electronics.electronics16", backgroundColor:"#ffffff"
+        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821"
-        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
-        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#79b821"
     }
     valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
         state "station1", label:'${currentValue}', action:"preset1"
@@ -749,16 +747,8 @@ def cb_boseSetInput(xml, input) {
  */
 def boseSetPowerState(boolean enable) {
     log.info "boseSetPowerState(${enable})"
-    // Fix to get faster update of power status back from speaker after sending on/off
+    queueCallback('nowPlaying', "cb_boseSetPowerState", enable ? "POWERON" : "POWEROFF")
-    // Instead of queuing the command to be sent after the refresh send it directly via sendHubCommand
+    return boseRefreshNowPlaying()
-    // Note: This is a temporary hack that should be replaced by a re-design of the
-    // DTH to use sendHubCommand for all commands
-    sendHubCommand(bosePOST("/key", "<key state=\"press\" sender=\"Gabbo\">POWER</key>")) 
-    sendHubCommand(bosePOST("/key", "<key state=\"release\" sender=\"Gabbo\">POWER</key>"))
-    sendHubCommand(boseGET("/now_playing"))
-    if (enable) {
-        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", 5)
-    }
 }
 
 /**
@@ -797,11 +787,10 @@ def cb_boseSetPowerState(xml, state) {
  */
 def cb_boseConfirmPowerOn(xml, tries) {
     def result = []
-    def attempt = tries as Integer
+    log.warn "boseConfirmPowerOn() attempt #" + tries
-    log.warn "boseConfirmPowerOn() attempt #$attempt"
+    if (xml.attributes()['source'] == "STANDBY" && tries > 0) {
-    if (xml.attributes()['source'] == "STANDBY" && attempt > 0) {
         result << boseRefreshNowPlaying()
-        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", attempt-1)
+        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", tries-1)
     }
     return result
 }

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -23,7 +23,6 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
-        capability "Health Check"
 
         fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
     }
@@ -67,12 +66,6 @@ def parse(String description) {
     def resultMap = zigbee.getEvent(description)
     if (resultMap) {
         sendEvent(resultMap)
-        // Temporary fix for the case when Device is OFFLINE and is connected again
-        if (state.lastActivity == null){
-            state.lastActivity = now()
-            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-        }
-        state.lastActivity = now()
     }
     else {
         log.debug "DID NOT PARSE MESSAGE for description : $description"
@@ -92,21 +85,6 @@ def setLevel(value) {
     zigbee.setLevel(value) + ["delay 500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-
-    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-        state.lastActivity = null
-        return zigbee.levelRefresh()
-    } else {
-        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-    }
-}
-
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
@@ -117,6 +95,5 @@ def poll() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    sendEvent(name: "checkInterval", value: 1200, displayed: false, data: [protocol: "zigbee"])
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -21,9 +21,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 
-		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint inClusters: "0x26"
-		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
-		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "Z-Wave Plug-In Dimmer"
 	}
 
 	simulator {
@@ -44,10 +42,6 @@ metadata {
 		reply "200163,delay 5000,2602": "command: 2603, payload: 63"
 	}
 
-	preferences {
-		input "ledIndicator", "enum", title: "LED Indicator", description: "Turn LED indicator... ", required: false, options:["on": "When On", "off": "When Off", "never": "Never"], defaultValue: "off"
-	}
-
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
@@ -76,28 +70,11 @@ metadata {
 		}
 
 		main(["switch"])
-		details(["switch", "level", "refresh"])
+		details(["switch", "level", "indicator", "refresh"])
 
 	}
 }
 
-def updated(){
-  switch (ledIndicator) {
-        case "on":
-            indicatorWhenOn()
-            break
-        case "off":
-            indicatorWhenOff()
-            break
-        case "never":
-            indicatorNever()
-            break
-        default:
-            indicatorWhenOn()
-            break
-    }
-}
-
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
@@ -225,19 +202,19 @@ def refresh() {
 	delayBetween(commands,100)
 }
 
-void indicatorWhenOn() {
+def indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on", display: false)
+	sendEvent(name: "indicatorStatus", value: "when on")
-	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
+	zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()
 }
 
-void indicatorWhenOff() {
+def indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off", display: false)
+	sendEvent(name: "indicatorStatus", value: "when off")
-	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
+	zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()
 }
 
-void indicatorNever() {
+def indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never", display: false)
+	sendEvent(name: "indicatorStatus", value: "never")
-	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
+	zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()
 }
 
 def invertSwitch(invert=true) {
@@ -247,4 +224,4 @@ def invertSwitch(invert=true) {
 	else {
 		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
 	}
-}
+}

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -43,7 +43,7 @@ metadata {
 		}
 
 		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:"Reset To White", action:"reset", icon:"st.lights.philips.hue-single"
+			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
 
 		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
@@ -51,7 +51,7 @@ metadata {
 		}
 
 		main(["rich-control"])
-		details(["rich-control", "reset", "refresh"])
+		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
 	}
 }
 
@@ -75,78 +75,118 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
+	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
+	sendEvent(name: "switch", value: "off")
+}
+
+void nextLevel() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level <= 100) {
+		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
+	}
+	else {
+		level = 25
+	}
+	setLevel(level)
 }
 
 void setLevel(percent) {
     log.debug "Executing 'setLevel'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setLevel(this, percent)
+        parent.setLevel(this, percent)
+        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
+        sendEvent(name: "switch", value: "on")
     }
 }
 
 void setSaturation(percent) {
     log.debug "Executing 'setSaturation'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setSaturation(this, percent)
+        parent.setSaturation(this, percent)
+        sendEvent(name: "saturation", value: percent, displayed: false)
     }
 }
 
 void setHue(percent) {
     log.debug "Executing 'setHue'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setHue(this, percent)
+        parent.setHue(this, percent)
+        sendEvent(name: "hue", value: percent, displayed: false)
     }
 }
 
 void setColor(value) {
+    log.debug "setColor: ${value}, $this"
     def events = []
     def validValues = [:]
 
     if (verifyPercent(value.hue)) {
+        events << createEvent(name: "hue", value: value.hue, displayed: false)
         validValues.hue = value.hue
     }
     if (verifyPercent(value.saturation)) {
+        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
         validValues.saturation = value.saturation
     }
     if (value.hex != null) {
         if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
+            events << createEvent(name: "color", value: value.hex)
             validValues.hex = value.hex
         } else {
             log.warn "$value.hex is not a valid color"
         }
     }
     if (verifyPercent(value.level)) {
+        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
         validValues.level = value.level
     }
     if (value.switch == "off" || (value.level != null && value.level <= 0)) {
+        events << createEvent(name: "switch", value: "off")
         validValues.switch = "off"
     } else {
+        events << createEvent(name: "switch", value: "on")
         validValues.switch = "on"
     }
-    if (!validValues.isEmpty()) {
+    if (!events.isEmpty()) {
-	    log.trace parent.setColor(this, validValues)
+        parent.setColor(this, validValues)
+    }
+    events.each {
+        sendEvent(it)
     }
 }
 
 void reset() {
     log.debug "Executing 'reset'"
-	def value = [hue:20, saturation:2]
+    def value = [level:100, saturation:56, hue:23]
-	setAdjustedColor(value)
+    setAdjustedColor(value)
+    parent.poll()
 }
 
 void setAdjustedColor(value) {
     if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
+        adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
         adjusted.level = null
-	    setColor(adjusted)
+        setColor(adjusted)
     } else {
-        log.warn "Invalid color input $value"
+        log.warn "Invalid color input"
+    }
+}
+
+void setColorTemperature(value) {
+    if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "Invalid color temperature"
     }
 }
 
@@ -155,6 +195,22 @@ void refresh() {
     parent.manualRefresh()
 }
 
+def adjustOutgoingHue(percent) {
+	def adjusted = percent
+	if (percent > 31) {
+		if (percent < 63.0) {
+			adjusted = percent + (7 * (percent -30 ) / 32)
+		}
+		else if (percent < 73.0) {
+			adjusted = 69 + (5 * (percent - 62) / 10)
+		}
+		else {
+			adjusted = percent + (2 * (100 - percent) / 28)
+		}
+	}
+	log.info "percent: $percent, adjusted: $adjusted"
+	adjusted
+}
 
 def verifyPercent(percent) {
     if (percent == null)

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,13 +7,8 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
+		attribute "serialNumber", "string"
 		attribute "networkAddress", "string"
-        // Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
-        // Possible values "Online" or "Offline"
-		attribute "status", "string"
-		// Id is the number on the back of the hub, Hue uses last six digits of Mac address
-		// This is also used in the Hue application as ID
-		attribute "idNumber", "string"
 	}
 
 	simulator {
@@ -22,23 +17,22 @@ metadata {
 
 	tiles(scale: 2) {
      	multiAttributeTile(name:"rich-control"){
-			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
+			tileAttribute ("", key: "PRIMARY_CONTROL") {
-				attributeState "Offline", label: '${currentValue}', action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#ffffff"
+	            attributeState "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#F3C200"
-	            attributeState "Online", label: '${currentValue}', action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#79b821"
 			}
+	        tileAttribute ("serialNumber", key: "SECONDARY_CONTROL") {
+	            attributeState "default", label:'SN: ${currentValue}'
 			}
-		valueTile("doNotRemove", "v", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+        }
-			state "default", label:'If removed, Hue lights will not work properly'
+		valueTile("serialNumber", "device.serialNumber", decoration: "flat", height: 1, width: 2, inactiveLabel: false) {
+			state "default", label:'SN: ${currentValue}'
 		}
-		valueTile("idNumber", "device.idNumber", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 2, width: 4, inactiveLabel: false) {
-			state "default", label:'ID: ${currentValue}'
+			state "default", label:'${currentValue}', height: 1, width: 2, inactiveLabel: false
-		}
-		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
-			state "default", label:'IP: ${currentValue}'
 		}
 
 		main (["rich-control"])
-		details(["rich-control", "doNotRemove", "idNumber", "networkAddress"])
+		details(["rich-control", "networkAddress"])
 	}
 }
 

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -43,16 +43,16 @@ metadata {
 			}
 		}
 
-    controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
-        state "colorTemperature", action:"color temperature.setColorTemperature"
+            state "colorTemperature", action:"color temperature.setColorTemperature"
-    }
+        }
 
-    valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-        state "colorTemperature", label: 'WHITES'
+            state "colorTemperature", label: '${currentValue} K'
-    }
+        }
 
 		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:"Reset To White", action:"reset", icon:"st.lights.philips.hue-single"
+			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
 
 		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
@@ -84,86 +84,118 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
+	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
+	sendEvent(name: "switch", value: "off")
+}
+
+void nextLevel() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level <= 100) {
+		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
+	}
+	else {
+		level = 25
+	}
+	setLevel(level)
 }
 
 void setLevel(percent) {
     log.debug "Executing 'setLevel'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setLevel(this, percent)
+        parent.setLevel(this, percent)
+        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
+        sendEvent(name: "switch", value: "on")
     }
 }
 
 void setSaturation(percent) {
     log.debug "Executing 'setSaturation'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setSaturation(this, percent)
+        parent.setSaturation(this, percent)
+        sendEvent(name: "saturation", value: percent, displayed: false)
     }
 }
 
 void setHue(percent) {
     log.debug "Executing 'setHue'"
     if (verifyPercent(percent)) {
-	    log.trace parent.setHue(this, percent)
+        parent.setHue(this, percent)
+        sendEvent(name: "hue", value: percent, displayed: false)
     }
 }
 
 void setColor(value) {
+    log.debug "setColor: ${value}, $this"
     def events = []
     def validValues = [:]
 
     if (verifyPercent(value.hue)) {
+        events << createEvent(name: "hue", value: value.hue, displayed: false)
         validValues.hue = value.hue
     }
     if (verifyPercent(value.saturation)) {
+        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
         validValues.saturation = value.saturation
     }
     if (value.hex != null) {
         if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
+            events << createEvent(name: "color", value: value.hex)
             validValues.hex = value.hex
         } else {
             log.warn "$value.hex is not a valid color"
         }
     }
     if (verifyPercent(value.level)) {
+        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
         validValues.level = value.level
     }
     if (value.switch == "off" || (value.level != null && value.level <= 0)) {
+        events << createEvent(name: "switch", value: "off")
         validValues.switch = "off"
     } else {
+        events << createEvent(name: "switch", value: "on")
         validValues.switch = "on"
     }
-    if (!validValues.isEmpty()) {
+    if (!events.isEmpty()) {
-	    log.trace parent.setColor(this, validValues)
+        parent.setColor(this, validValues)
+    }
+    events.each {
+        sendEvent(it)
     }
 }
 
 void reset() {
     log.debug "Executing 'reset'"
-	setColorTemperature(4000)
+    def value = [level:100, saturation:56, hue:23]
+    setAdjustedColor(value)
+    parent.poll()
 }
 
 void setAdjustedColor(value) {
     if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
+        adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
         adjusted.level = null
-	    setColor(adjusted)
+        setColor(adjusted)
     } else {
-        log.warn "Invalid color input $value"
+        log.warn "Invalid color input"
     }
 }
 
 void setColorTemperature(value) {
     if (value) {
         log.trace "setColorTemperature: ${value}k"
-	    log.trace parent.setColorTemperature(this, value)
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+        sendEvent(name: "switch", value: "on")
     } else {
-        log.warn "Invalid color temperature $value"
+        log.warn "Invalid color temperature"
     }
 }
 
@@ -172,6 +204,23 @@ void refresh() {
     parent.manualRefresh()
 }
 
+def adjustOutgoingHue(percent) {
+	def adjusted = percent
+	if (percent > 31) {
+		if (percent < 63.0) {
+			adjusted = percent + (7 * (percent -30 ) / 32)
+		}
+		else if (percent < 73.0) {
+			adjusted = 69 + (5 * (percent - 62) / 10)
+		}
+		else {
+			adjusted = percent + (2 * (100 - percent) / 28)
+		}
+	}
+	log.info "percent: $percent, adjusted: $adjusted"
+	adjusted
+}
+
 def verifyPercent(percent) {
     if (percent == null)
         return false

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -68,16 +68,20 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
+	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
+	sendEvent(name: "switch", value: "off")
 }
 
 void setLevel(percent) {
 	log.debug "Executing 'setLevel'"
     if (percent != null && percent >= 0 && percent <= 100) {
 		parent.setLevel(this, percent)
+		sendEvent(name: "level", value: percent)
+		sendEvent(name: "switch", value: "on")
 	} else {
     	log.warn "$percent is not 0-100"
     }

devicetypes/smartthings/hue-white-ambiance-bulb/hue-white-ambiance-bulb.groovy

@@ -36,12 +36,12 @@ metadata {
             }
         }
 
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2200..6500)") {
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
 
         valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: 'WHITES'
+            state "colorTemperature", label: '${currentValue} K'
         }
 
         standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
@@ -73,16 +73,20 @@ def parse(description) {
 // handle commands
 void on() {
     log.trace parent.on(this)
+    sendEvent(name: "switch", value: "on")
 }
 
 void off() {
     log.trace parent.off(this)
+    sendEvent(name: "switch", value: "off")
 }
 
 void setLevel(percent) {
     log.debug "Executing 'setLevel'"
     if (percent != null && percent >= 0 && percent <= 100) {
-        log.trace parent.setLevel(this, percent)
+        parent.setLevel(this, percent)
+        sendEvent(name: "level", value: percent)
+        sendEvent(name: "switch", value: "on")
     } else {
         log.warn "$percent is not 0-100"
     }
@@ -91,7 +95,9 @@ void setLevel(percent) {
 void setColorTemperature(value) {
     if (value) {
         log.trace "setColorTemperature: ${value}k"
-        log.trace parent.setColorTemperature(this, value)
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+        sendEvent(name: "switch", value: "on")
     } else {
         log.warn "Invalid color temperature"
     }
@@ -101,3 +107,4 @@ void refresh() {
     log.debug "Executing 'refresh'"
     parent.manualRefresh()
 }
+

devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy

@@ -13,7 +13,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "NYCE Motion Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -144,14 +143,51 @@ private Map parseReportAttributeMessage(String description) {
  
 
 private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+    List parsedMsg = description.split(' ')
-	Map resultMap = [:]
+    String msgCode = parsedMsg[2]
+    
+    Map resultMap = [:]
+    switch(msgCode) {
+        case '0x0030': // Closed/No Motion/Dry
+            log.debug 'no motion'
+            resultMap.name = 'motion'
+            resultMap.value = 'inactive'
+            break
 
-	resultMap.name = 'motion'
+        case '0x0032': // Open/Motion/Wet
-	resultMap.value = zs.isAlarm2Set() ? 'active' : 'inactive'
+            log.debug 'motion'
-	log.debug(zs.isAlarm2Set() ? 'motion' : 'no motion')
+            resultMap.name = 'motion'
+            resultMap.value = 'active'
+            break
 
-	return resultMap
+        case '0x0032': // Tamper Alarm
+        	log.debug 'motion with tamper alarm'
+            resultMap.name = 'motion'
+            resultMap.value = 'active'
+            break
+
+        case '0x0033': // Battery Alarm
+            break
+
+        case '0x0034': // Supervision Report
+        	log.debug 'no motion with tamper alarm'
+            resultMap.name = 'motion'
+            resultMap.value = 'inactive'
+            break
+
+        case '0x0035': // Restore Report
+            break
+
+        case '0x0036': // Trouble/Failure
+        	log.debug 'motion with failure alarm'
+            resultMap.name = 'motion'
+            resultMap.value = 'active'
+            break
+
+        case '0x0038': // Test Mode
+            break
+    }
+    return resultMap
 }
 
 def refresh()

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -13,10 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
+ 
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
-
-
 metadata {
 	definition (name: "NYCE Open/Closed Sensor", namespace: "smartthings", author: "NYCE") {
     	capability "Battery"
@@ -222,33 +219,40 @@ private Map parseReportAttributeMessage(String description) {
 }
 
 private List parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	List parsedMsg = description.split(" ")
-	log.debug "parseIasMessage: $description"
+	String msgCode = parsedMsg[2]
 
 	List resultListMap = []
 	Map resultMap_battery = [:]
 	Map resultMap_battery_state = [:]
 	Map resultMap_sensor = [:]
 
-	resultMap_sensor.name = "contact"
+	// Relevant bit field definitions from ZigBee spec
-	resultMap_sensor.value = zs.isAlarm1Set() ? "open" : "closed"
+	def BATTERY_BIT = ( 1 << 3 )
+	def TROUBLE_BIT = ( 1 << 6 )
+	def SENSOR_BIT = ( 1 << 0 )		// it's ALARM1 bit from the ZCL spec
+
+	// Convert hex string to integer
+	def zoneStatus = Integer.parseInt(msgCode[-4..-1],16)
+
+	log.debug "parseIasMessage: zoneStatus: ${zoneStatus}"
 
 	// Check each relevant bit, create map for it, and add to list
-	log.debug "parseIasMessage: Battery Status ${zs.battery}"
+	log.debug "parseIasMessage: Battery Status ${zoneStatus & BATTERY_BIT}"
-	log.debug "parseIasMessage: Trouble Status ${zs.trouble}"
+	log.debug "parseIasMessage: Trouble Status ${zoneStatus & TROUBLE_BIT}"
-	log.debug "parseIasMessage: Sensor Status ${zs.alarm1}"
+	log.debug "parseIasMessage: Sensor Status ${zoneStatus & SENSOR_BIT}"
 
 	/* 	Comment out this path to check the battery state to avoid overwriting the
 		battery value (Change log #2), but keep these conditions for later use
 	 resultMap_battery_state.name = "battery_state"
-	 if (zs.isTroubleSet()) {
+	 if (zoneStatus & TROUBLE_BIT) {
 		 resultMap_battery_state.value = "failed"
 
 		 resultMap_battery.name = "battery"
 		 resultMap_battery.value = 0
 	 }
 	 else {
-		 if (zs.isBatterySet()) {
+		 if (zoneStatus & BATTERY_BIT) {
 			 resultMap_battery_state.value = "low"
 
 			 // to generate low battery notification by the platform
@@ -266,6 +270,9 @@ private List parseIasMessage(String description) {
 	 }
 	*/
 
+	resultMap_sensor.name = "contact"
+	resultMap_sensor.value = (zoneStatus & SENSOR_BIT) ? "open" : "closed"
+
 	resultListMap << resultMap_battery_state
 	resultListMap << resultMap_battery
 	resultListMap << resultMap_sensor

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -101,12 +101,6 @@ def parse(String description) {
 		else {
 			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
 			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
-			// Temporary fix for the case when Device is OFFLINE and is connected again
-			if (state.lastActivity == null){
-				state.lastActivity = now()
-				sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-			}
-			state.lastActivity = now()
 		}
 	}
 	else {
@@ -122,27 +116,13 @@ def off() {
 def on() {
 	zigbee.on()
 }
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.onOffRefresh()
-	} else {
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-}
 
 def refresh() {
-	zigbee.onOffRefresh() + zigbee.electricMeasurementPowerRefresh()
+	zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 1200, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 1200, displayed: false)
 	zigbee.onOffConfig() + powerConfig() + refresh()
 }
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -13,8 +13,6 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
-
 
 metadata {
 	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -24,7 +22,6 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Water Sensor"
 		capability "Health Check"
-		capability "Sensor"
 
 		command "enrollResponse"
 
@@ -101,13 +98,6 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
-	// Temporary fix for the case when Device is OFFLINE and is connected again
-	if (state.lastActivity == null){
-		state.lastActivity = now()
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-	state.lastActivity = now()
-
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -179,9 +169,42 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	List parsedMsg = description.split(' ')
+	String msgCode = parsedMsg[2]
 
-	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
+	Map resultMap = [:]
+	switch(msgCode) {
+		case '0x0020': // Closed/No Motion/Dry
+			resultMap = getMoistureResult('dry')
+			break
+
+		case '0x0021': // Open/Motion/Wet
+			resultMap = getMoistureResult('wet')
+			break
+
+		case '0x0022': // Tamper Alarm
+			break
+
+		case '0x0023': // Battery Alarm
+			break
+
+		case '0x0024': // Supervision Report
+			 log.debug 'dry with tamper alarm'
+			resultMap = getMoistureResult('dry')
+			break
+
+		case '0x0025': // Restore Report
+			log.debug 'water with tamper alarm'
+			resultMap = getMoistureResult('wet')
+			break
+
+		case '0x0026': // Trouble/Failure
+			break
+
+		case '0x0028': // Test Mode
+			break
+	}
+	return resultMap
 }
 
 def getTemperature(value) {
@@ -232,8 +255,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, (int) pct * 100)
-				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -278,21 +300,6 @@ private Map getMoistureResult(value) {
 	]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-	} else {
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-}
-
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
@@ -304,7 +311,7 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -13,8 +13,6 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
-
 
 metadata {
 	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -24,7 +22,6 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Health Check"
-		capability "Sensor"
 
 		command "enrollResponse"
 
@@ -105,13 +102,6 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
-	// Temporary fix for the case when Device is OFFLINE and is connected again
-	if (state.lastActivity == null){
-		state.lastActivity = now()
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-	state.lastActivity = now()
-
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -192,10 +182,44 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	List parsedMsg = description.split(' ')
+	String msgCode = parsedMsg[2]
 
-	// Some sensor models that use this DTH use alarm1 and some use alarm2 to signify motion
+	Map resultMap = [:]
-	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
+	switch(msgCode) {
+		case '0x0020': // Closed/No Motion/Dry
+			resultMap = getMotionResult('inactive')
+			break
+
+		case '0x0021': // Open/Motion/Wet
+			resultMap = getMotionResult('active')
+			break
+
+		case '0x0022': // Tamper Alarm
+			log.debug 'motion with tamper alarm'
+			resultMap = getMotionResult('active')
+			break
+
+		case '0x0023': // Battery Alarm
+			break
+
+		case '0x0024': // Supervision Report
+			log.debug 'no motion with tamper alarm'
+			resultMap = getMotionResult('inactive')
+			break
+
+		case '0x0025': // Restore Report
+			break
+
+		case '0x0026': // Trouble/Failure
+			log.debug 'motion with failure alarm'
+			resultMap = getMotionResult('active')
+			break
+
+		case '0x0028': // Test Mode
+			break
+	}
+	return resultMap
 }
 
 def getTemperature(value) {
@@ -247,8 +271,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, (int) pct * 100)
-				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -289,21 +312,6 @@ private Map getMotionResult(value) {
 	]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-	} else { 
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-}
-
 def refresh() {
 	log.debug "refresh called"
 	def refreshCmds = [
@@ -315,7 +323,7 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -15,7 +15,6 @@
  */
 
 //DEPRECATED - Using the smartsense-motion-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "SmartSense Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -25,7 +24,7 @@ metadata {
         capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Sensor"
-
+        
         command "enrollResponse"
 
 	}
@@ -74,7 +73,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -88,10 +87,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
 	    map = parseIasMessage(description)
     }
-
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
+    
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -129,7 +128,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -142,7 +141,7 @@ private Map parseReportAttributeMessage(String description) {
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -154,11 +153,11 @@ private Map parseReportAttributeMessage(String description) {
     else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
     	def value = descMap.value.endsWith("01") ? "active" : "inactive"
     	resultMap = getMotionResult(value)
-    }
+    } 
-
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -169,8 +168,44 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+    List parsedMsg = description.split(' ')
-	return zs.isAlarm1Set() ? getMotionResult('active') : getMotionResult('inactive')
+    String msgCode = parsedMsg[2]
+    
+    Map resultMap = [:]
+    switch(msgCode) {
+        case '0x0020': // Closed/No Motion/Dry
+        	resultMap = getMotionResult('inactive')
+            break
+
+        case '0x0021': // Open/Motion/Wet
+        	resultMap = getMotionResult('active')
+            break
+
+        case '0x0022': // Tamper Alarm
+        	log.debug 'motion with tamper alarm'
+        	resultMap = getMotionResult('active')
+            break
+
+        case '0x0023': // Battery Alarm
+            break
+
+        case '0x0024': // Supervision Report
+        	log.debug 'no motion with tamper alarm'
+        	resultMap = getMotionResult('inactive')
+            break
+
+        case '0x0025': // Restore Report
+            break
+
+        case '0x0026': // Trouble/Failure
+        	log.debug 'motion with failure alarm'
+        	resultMap = getMotionResult('active')
+            break
+
+        case '0x0028': // Test Mode
+            break
+    }
+    return resultMap
 }
 
 def getTemperature(value) {
@@ -205,8 +240,7 @@ private Map getBatteryResult(rawValue) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
+			result.value = Math.min(100, (int) pct * 100)
-			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 	}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -13,7 +13,6 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -127,13 +126,6 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
-	// Temporary fix for the case when Device is OFFLINE and is connected again
-	if (state.lastActivity == null){
-		state.lastActivity = now()
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-	state.lastActivity = now()
-
 	def result = map ? createEvent(map) : null
 
 	if (description?.startsWith('enroll request')) {
@@ -232,13 +224,47 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	List parsedMsg = description.split(' ')
+	String msgCode = parsedMsg[2]
+
 	Map resultMap = [:]
-
+	switch(msgCode) {
+		case '0x0020': // Closed/No Motion/Dry
 			if (garageSensor != "Yes"){
-		resultMap = zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
+				resultMap = getContactResult('closed')
 			}
+		break
 
+		case '0x0021': // Open/Motion/Wet
+			if (garageSensor != "Yes"){
+				resultMap = getContactResult('open')
+			}
+		break
+
+		case '0x0022': // Tamper Alarm
+		break
+
+		case '0x0023': // Battery Alarm
+		break
+
+		case '0x0024': // Supervision Report
+			if (garageSensor != "Yes"){
+				resultMap = getContactResult('closed')
+			}
+		break
+
+		case '0x0025': // Restore Report
+			if (garageSensor != "Yes"){
+				resultMap = getContactResult('open')
+			}
+		break
+
+		case '0x0026': // Trouble/Failure
+		break
+
+		case '0x0028': // Test Mode
+		break
+	}
 	return resultMap
 }
 
@@ -312,8 +338,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, (int) pct * 100)
-				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -371,21 +396,6 @@ private getAccelerationResult(numValue) {
 	]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-	} else {
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-}
-
 def refresh() {
 	log.debug "Refreshing Values "
 
@@ -413,7 +423,7 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	log.debug "Configuring Reporting"
 

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -14,7 +14,6 @@
  *
  */
 //DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
  metadata {
  	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -25,7 +24,6 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
  		capability "Refresh"
  		capability "Temperature Measurement"
 		capability "Health Check"
-		capability "Sensor"
 
 		command "enrollResponse"
  	}
@@ -173,9 +171,40 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	List parsedMsg = description.split(' ')
+	String msgCode = parsedMsg[2]
 
-	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
+	Map resultMap = [:]
+	switch(msgCode) {
+        case '0x0020': // Closed/No Motion/Dry
+        resultMap = getContactResult('closed')
+        break
+
+        case '0x0021': // Open/Motion/Wet
+        resultMap = getContactResult('open')
+        break
+
+        case '0x0022': // Tamper Alarm
+        break
+
+        case '0x0023': // Battery Alarm
+        break
+
+        case '0x0024': // Supervision Report
+        resultMap = getContactResult('closed')
+        break
+
+        case '0x0025': // Restore Report
+        resultMap = getContactResult('open')
+        break
+
+        case '0x0026': // Trouble/Failure
+        break
+
+        case '0x0028': // Test Mode
+        break
+    }
+    return resultMap
 }
 
 def getTemperature(value) {
@@ -205,8 +234,7 @@ def getTemperature(value) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
+			result.value = Math.min(100, (int) pct * 100)
-			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -13,35 +13,32 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+ 
-
 metadata {
-	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-		capability "Health Check"
+        
-		capability "Sensor"
-
 		command "enrollResponse"
-
+ 
-
+ 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
 	}
-
+ 
 	simulator {
-
+ 
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
-
+ 
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
@@ -74,10 +71,10 @@ metadata {
 		details(["contact","temperature","battery","refresh"])
 	}
 }
-
+ 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -91,17 +88,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
-
+ 
-	// Temporary fix for the case when Device is OFFLINE and is connected again
-	if (state.lastActivity == null){
-		state.lastActivity = now()
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-	state.lastActivity = now()
-
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
+    
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -109,7 +99,7 @@ def parse(String description) {
     }
     return result
 }
-
+ 
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -135,7 +125,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -145,14 +135,14 @@ private boolean shouldProcessMessage(cluster) {
 private int getHumidity(value) {
     return Math.round(Double.parseDouble(value))
 }
-
+ 
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -161,10 +151,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -175,10 +165,42 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+    List parsedMsg = description.split(' ')
-	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
+    String msgCode = parsedMsg[2]
-}
+    
+    Map resultMap = [:]
+    switch(msgCode) {
+        case '0x0020': // Closed/No Motion/Dry
+        	resultMap = getContactResult('closed')
+            break
 
+        case '0x0021': // Open/Motion/Wet
+        	resultMap = getContactResult('open')
+            break
+
+        case '0x0022': // Tamper Alarm
+            break
+
+        case '0x0023': // Battery Alarm
+            break
+
+        case '0x0024': // Supervision Report
+        	resultMap = getContactResult('closed')
+            break
+
+        case '0x0025': // Restore Report
+        	resultMap = getContactResult('open')
+            break
+
+        case '0x0026': // Trouble/Failure
+            break
+
+        case '0x0028': // Test Mode
+            break
+    }
+    return resultMap
+}
+ 
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -191,11 +213,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-
+    
     def result = [
     	name: 'battery'
     ]
-
+    
 	def volts = rawValue / 10
 	def descriptionText
     if (rawValue == 0 || rawValue == 255) {}
@@ -206,8 +228,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, (int) pct * 100)
-		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -241,21 +262,6 @@ private Map getContactResult(value) {
 	]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-	} else {
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-}
-
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
@@ -267,7 +273,6 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -21,7 +21,6 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Relative Humidity Measurement"
 		capability "Health Check"
-		capability "Sensor"
 
 		fingerprint endpointId: "01", inClusters: "0001,0003,0020,0402,0B05,FC45", outClusters: "0019,0003"
 	}
@@ -83,13 +82,6 @@ def parse(String description) {
 		map = parseCustomMessage(description)
 	}
 
-	// Temporary fix for the case when Device is OFFLINE and is connected again
-	if (state.lastActivity == null){
-		state.lastActivity = now()
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-	state.lastActivity = now()
-
 	log.debug "Parse returned $map"
 	return map ? createEvent(map) : null
 }
@@ -213,8 +205,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, (int) pct * 100)
-		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -246,20 +237,6 @@ private Map getHumidityResult(value) {
 	]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-	} else {
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-}
-
 def refresh()
 {
 	log.debug "refresh temperature, humidity, and battery"
@@ -275,7 +252,7 @@ def refresh()
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [

devicetypes/smartthings/testing/simulated-alarm.src/simulated-alarm.groovy

@@ -16,8 +16,6 @@
 metadata {
 	definition (name: "Simulated Alarm", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Alarm"
-		capability "Sensor"
-		capability "Actuator"
 	}
 
 	simulator {

devicetypes/smartthings/testing/simulated-color-control.src/simulated-color-control.groovy

@@ -1,8 +1,6 @@
 metadata {
 	definition (name: "Simulated Color Control", namespace: "smartthings/testing", author: "SmartThings") {
     	capability "Color Control"
-		capability "Sensor"
-		capability "Actuator"
 	}
 
 	simulator {

devicetypes/smartthings/testing/simulated-contact-sensor.src/simulated-contact-sensor.groovy

@@ -15,7 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Contact Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Contact Sensor"
-		capability "Sensor"
 
 		command "open"
 		command "close"

devicetypes/smartthings/testing/simulated-lock.src/simulated-lock.groovy

@@ -15,8 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Lock", namespace: "smartthings/testing", author: "bob") {
 		capability "Lock"
-		capability "Sensor"
-		capability "Actuator"
 	}
 
 	// Simulated lock

devicetypes/smartthings/testing/simulated-motion-sensor.src/simulated-motion-sensor.groovy

@@ -15,7 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Motion Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Motion Sensor"
-		capability "Sensor"
 
 		command "active"
 		command "inactive"

devicetypes/smartthings/testing/simulated-presence-sensor.src/simulated-presence-sensor.groovy

@@ -15,7 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Presence Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Presence Sensor"
-		capability "Sensor"
 
 		command "arrived"
 		command "departed"

devicetypes/smartthings/testing/simulated-switch.src/simulated-switch.groovy

@@ -16,8 +16,6 @@ metadata {
     definition (name: "Simulated Switch", namespace: "smartthings/testing", author: "bob") {
 		capability "Switch"
         capability "Relay Switch"
-		capability "Sensor"
-		capability "Actuator"
 
 		command "onPhysical"
 		command "offPhysical"

devicetypes/smartthings/testing/simulated-temperature-sensor.src/simulated-temperature-sensor.groovy

@@ -16,7 +16,6 @@ metadata {
 	definition (name: "Simulated Temperature Sensor", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Temperature Measurement"
 		capability "Switch Level"
-		capability "Sensor"
 
 		command "up"
 		command "down"

devicetypes/smartthings/testing/simulated-thermostat.src/simulated-thermostat.groovy

@@ -16,8 +16,6 @@ metadata {
 	definition (name: "Simulated Thermostat", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Thermostat"
 		capability "Relative Humidity Measurement"
-		capability "Sensor"
-		capability "Actuator"
 
 		command "tempUp"
 		command "tempDown"

devicetypes/smartthings/testing/simulated-water-sensor.src/simulated-water-sensor.groovy

@@ -15,7 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Water Sensor", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Water Sensor"
-		capability "Sensor"
         
         command "wet"
         command "dry"

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -13,8 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+ 
-
 metadata {
 	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
@@ -22,28 +21,28 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-
+        
 		command "enrollResponse"
-
+ 
-
+ 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Visonic", model: "MCT-340 SMA"
 	}
-
+ 
 	simulator {
-
+ 
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
-
+ 
 	tiles {
     	standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
 			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
-
+    	
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
@@ -59,23 +58,23 @@ metadata {
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-
+        
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-
+        
 		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
 			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
 		}
-
+ 
 		main (["contact", "temperature"])
 		details(["contact","temperature","battery","refresh","configure"])
 	}
 }
-
+ 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -89,10 +88,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
-
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
+    
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -100,7 +99,7 @@ def parse(String description) {
     }
     return result
 }
-
+ 
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -126,20 +125,20 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
-
+ 
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -148,10 +147,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -162,11 +161,42 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+    List parsedMsg = description.split(' ')
+    String msgCode = parsedMsg[2]
+    
+    Map resultMap = [:]
+    switch(msgCode) {
+        case '0x0020': // Closed/No Motion/Dry
+        	resultMap = getContactResult('closed')
+            break
 
-	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
+        case '0x0021': // Open/Motion/Wet
+        	resultMap = getContactResult('open')
+            break
+
+        case '0x0022': // Tamper Alarm
+            break
+
+        case '0x0023': // Battery Alarm
+            break
+
+        case '0x0024': // Supervision Report
+        	resultMap = getContactResult('closed')
+            break
+
+        case '0x0025': // Restore Report
+        	resultMap = getContactResult('open')
+            break
+
+        case '0x0026': // Trouble/Failure
+            break
+
+        case '0x0028': // Test Mode
+            break
+    }
+    return resultMap
 }
-
+ 
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -179,11 +209,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-
+    
     def result = [
     	name: 'battery'
     ]
-
+    
 	def volts = rawValue / 10
 	def descriptionText
 	if (volts > 3.5) {
@@ -193,8 +223,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, (int) pct * 100)
-		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -232,7 +261,7 @@ def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
 	[
-
+    
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
@@ -245,24 +274,24 @@ def configure() {
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
     	"delay 1000",
-
+        
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
+        
         "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
+        
         "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
+        
-
+        
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
+        
-
+        
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
 		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
-
+        
         "delay 500"
 	]
     return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
@@ -270,11 +299,11 @@ def configure() {
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [
+    [	
-
+    	
 	"raw 0x500 {01 23 00 00 00}", "delay 200",
     "send 0x${device.deviceNetworkId} 1 1"
-
+        
     ]
 }
 private hex(value) {

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -1,7 +1,8 @@
 /**
- *  ZigBee Button
+ *  Iris Smart Fob
  *
  *  Copyright 2015 Mitch Pond
+ *	Presence code adapted from SmartThings Arrival Sensor HA device type
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -13,235 +14,181 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
 metadata {
-    definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
+	definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
-        capability "Actuator"
+		capability "Battery"
-        capability "Battery"
+		capability "Button"
-        capability "Button"
         capability "Configuration"
-        capability "Refresh"
+		capability "Presence Sensor"
-        capability "Sensor"
+		capability "Sensor"
-
+        
-        command "enrollResponse"
+		//fingerprint endpointId: "01", profileId: "0104", inClusters: "0000,0001,0003,0007,0020,0B05", outClusters: "0003,0006,0019", model:"3450-L", manufacturer: "CentraLite"
-
+	}
-        fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
+    
-        //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
+    preferences{
-        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
+	    input ("holdTime", "number", title: "Minimum time in seconds for a press to count as \"held\"",
-        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
+    		defaultValue: 3, displayDuringSetup: false)
+        input "checkInterval", "enum", title: "Presence timeout (minutes)",
+            defaultValue:"2", options: ["2", "3", "5"], displayDuringSetup: false
+        input "logging", "bool", title: "Enable debug logging",
+            defaultValue: false, displayDuringSetup: false
     }
 
-    simulator {}
+	tiles(scale: 2) {
-
+    	standardTile("presence", "device.presence", width: 4, height: 4, canChangeBackground: true) {
-    preferences {
+            state "present", label: "Present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
-        section {
+            state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
-            input ("holdTime", "number", title: "Minimum time in seconds for a press to count as \"held\"", defaultValue: 1, displayDuringSetup: false)
         }
-    }
+    	standardTile("button", "device.button", decoration: "flat", width: 2, height: 2) {
-
+        	state "default", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
-    tiles {
-        standardTile("button", "device.button", width: 2, height: 2) {
-            state "default", label: "", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
-            state "button 1 pushed", label: "pushed #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#79b821"
         }
+		valueTile("battery", "device.battery", decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
 
-        valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
+		main (["presence"])
-            state "battery", label:'${currentValue}% battery', unit:""
+		details(["presence","button","battery"])
-        }
+	}
-
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
-            state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-        main (["button"])
-        details(["button", "battery", "refresh"])
-    }
 }
 
 def parse(String description) {
-    log.debug "description is $description"
+    def descMap = zigbee.parseDescriptionAsMap(description)
-    def event = zigbee.getEvent(description)
+    logIt descMap
-    if (event) {
+    state.lastCheckin = now()
-        sendEvent(event)
+    logIt "lastCheckin = ${state.lastCheckin}"
-    }
+    handlePresenceEvent(true)
-    else {
+    
-        if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
+	def results = []
-            def descMap = zigbee.parseDescriptionAsMap(description)
+    if (description?.startsWith('catchall:'))
-            if (descMap.clusterInt == 0x0001 && descMap.attrInt == 0x0020) {
+		results = parseCatchAllMessage(descMap)
-                event = getBatteryResult(zigbee.convertHexToInt(descMap.value))
+	else if (description?.startsWith('read attr -'))
-            }
+		results = parseReportAttributeMessage(descMap)
-            else if (descMap.clusterInt == 0x0006 || descMap.clusterInt == 0x0008) {
+    else logIt(descMap, "trace")
-                event = parseNonIasButtonMessage(descMap)
+        
-            }
+	return results;
-        }
-        else if (description?.startsWith('zone status')) {
-            event = parseIasButtonMessage(description)
-        }
-
-        log.debug "Parse returned $event"
-        def result = event ? createEvent(event) : []
-
-        if (description?.startsWith('enroll request')) {
-            List cmds = enrollResponse()
-            result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-        }
-        return result
-    }
-}
-
-private Map parseIasButtonMessage(String description) {
-    int zoneInt = Integer.parseInt((description - "zone status 0x"), 16)
-    if (zoneInt & 0x02) {
-        resultMap = getButtonResult('press')
-    } else {
-        resultMap = getButtonResult('release')
-    }
-
-    return resultMap
-}
-
-private Map getBatteryResult(rawValue) {
-    log.debug 'Battery'
-    def volts = rawValue / 10
-    if (volts > 3.0 || volts == 0 || rawValue == 0xFF) {
-        return [:]
-    }
-    else {
-        def result = [
-                name: 'battery'
-        ]
-        def minVolts = 2.1
-        def maxVolts = 3.0
-        def pct = (volts - minVolts) / (maxVolts - minVolts)
-        result.value = Math.min(100, (int) pct * 100)
-        def linkText = getLinkText(device)
-        result.descriptionText = "${linkText} battery was ${result.value}%"
-        return result
-    }
-}
-
-private Map parseNonIasButtonMessage(Map descMap){
-    def buttonState = ""
-    def buttonNumber = 0
-    if (((device.getDataValue("model") == "3460-L") || (device.getDataValue("model") == "3450-L"))
-            &&(descMap.clusterInt == 0x0006)) {
-        if (descMap.command == "01") {
-            getButtonResult("press")
-        }
-        else if (descMap.command == "00") {
-            getButtonResult("release")
-        }
-    }
-    else if (descMap.clusterInt == 0x0006) {
-        buttonState = "pushed"
-        if (descMap.command == "01") {
-            buttonNumber = 1
-        }
-        else if (descMap.command == "00") {
-            buttonNumber = 2
-        }
-        if (buttonNumber !=0) {
-            def descriptionText = "$device.displayName button $buttonNumber was $buttonState"
-            return createEvent(name: "button", value: buttonState, data: [buttonNumber: buttonNumber], descriptionText: descriptionText, isStateChange: true)
-        }
-        else {
-            return [:]
-        }
-    }
-    else if (descMap.clusterInt == 0x0008) {
-        if (descMap.command == "05") {
-            state.buttonNumber = 1
-            getButtonResult("press", 1)
-        }
-        else if (descMap.command == "01") {
-            state.buttonNumber = 2
-            getButtonResult("press", 2)
-        }
-        else if (descMap.command == "03") {
-            getButtonResult("release", state.buttonNumber)
-        }
-    }
-}
-
-def refresh() {
-    log.debug "Refreshing Battery"
-
-    return zigbee.readAttribute(0x0001, 0x20) +
-            zigbee.enrollResponse()
-}
-
-def configure() {
-    log.debug "Configuring Reporting, IAS CIE, and Bindings."
-    def cmds = []
-    if (device.getDataValue("model") == "3450-L") {
-        cmds << [
-                "zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 300",
-                "zdo bind 0x${device.deviceNetworkId} 2 1 6 {${device.zigbeeId}} {}", "delay 300",
-                "zdo bind 0x${device.deviceNetworkId} 3 1 6 {${device.zigbeeId}} {}", "delay 300",
-                "zdo bind 0x${device.deviceNetworkId} 4 1 6 {${device.zigbeeId}} {}", "delay 300"
-        ]
-    }
-    return zigbee.onOffConfig() +
-            zigbee.levelConfig() +
-            zigbee.configureReporting(0x0001, 0x20, 0x20, 30, 21600, 0x01) +
-            zigbee.enrollResponse() +
-            zigbee.readAttribute(0x0001, 0x20) +
-            cmds
-
-}
-
-private Map getButtonResult(buttonState, buttonNumber = 1) {
-    if (buttonState == 'release') {
-        log.debug "Button was value : $buttonState"
-        def timeDiff = now() - state.pressTime
-        log.info "timeDiff: $timeDiff"
-        def holdPreference = holdTime ?: 1
-        log.info "holdp1 : $holdPreference"
-        holdPreference = (holdPreference as int) * 1000
-        log.info "holdp2 : $holdPreference"
-        if (timeDiff > 10000) {         //timeDiff>10sec check for refresh sending release value causing actions to be executed
-            return [:]
-        }
-        else {
-            if (timeDiff < holdPreference) {
-                buttonState = "pushed"
-            }
-            else {
-                buttonState = "held"
-            }
-            def descriptionText = "$device.displayName button $buttonNumber was $buttonState"
-            return createEvent(name: "button", value: buttonState, data: [buttonNumber: buttonNumber], descriptionText: descriptionText, isStateChange: true)
-        }
-    }
-    else if (buttonState == 'press') {
-        log.debug "Button was value : $buttonState"
-        state.pressTime = now()
-        log.info "presstime: ${state.pressTime}"
-        return [:]
-    }
-}
-
-def installed() {
-    initialize()
 }
 
 def updated() {
-    initialize()
+	startTimer()
+    configure()
 }
 
-def initialize() {
+def configure(){
-    if ((device.getDataValue("manufacturer") == "OSRAM") && (device.getDataValue("model") == "LIGHTIFY Dimming Switch")) {
+	logIt "Configuring Smart Fob..."
-        sendEvent(name: "numberOfButtons", value: 2)
+	[
-    }
+	"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
-    else if ((device.getDataValue("manufacturer") == "CentraLite") &&
+    "zdo bind 0x${device.deviceNetworkId} 2 1 6 {${device.zigbeeId}} {}", "delay 200",
-            ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L"))) {
+    "zdo bind 0x${device.deviceNetworkId} 3 1 6 {${device.zigbeeId}} {}", "delay 200",
-        sendEvent(name: "numberOfButtons", value: 1)
+    "zdo bind 0x${device.deviceNetworkId} 4 1 6 {${device.zigbeeId}} {}", "delay 200",
-    }
+    "zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 200"
-    else if ((device.getDataValue("manufacturer") == "CentraLite") && (device.getDataValue("model") == "3450-L")) {
+    ] +
-        sendEvent(name: "numberOfButtons", value: 4)
+    zigbee.configureReporting(0x0001,0x0020,0x20,20,20,0x01)
-    }
-    else {
-        //default. can be changed
-        sendEvent(name: "numberOfButtons", value: 4)
-    }
-
 }
+
+def parseCatchAllMessage(descMap) {
+    if (descMap?.clusterId == "0006" && descMap?.command == "01") 		//button pressed
+    	handleButtonPress(descMap.sourceEndpoint as int)
+    else if (descMap?.clusterId == "0006" && descMap?.command == "00") 	//button released
+    	handleButtonRelease(descMap.sourceEndpoint as int)
+    else logIt("Parse: Unhandled message: ${descMap}","trace")
+}
+
+def parseReportAttributeMessage(descMap) {
+	if (descMap?.cluster == "0001" && descMap?.attrId == "0020") createBatteryEvent(getBatteryLevel(descMap.value))
+    else logIt descMap
+}
+
+private createBatteryEvent(percent) {
+	logIt "Battery level at " + percent
+	return createEvent([name: "battery", value: percent])
+}
+
+//this method determines if a press should count as a push or a hold and returns the relevant event type
+private handleButtonRelease(button) {
+	logIt "lastPress state variable: ${state.lastPress}"
+    def sequenceError = {logIt("Uh oh...missed a message? Dropping this event.", "error"); state.lastPress = null; return []}	
+    
+    if (!state.lastPress) return sequenceError()
+	else if (state.lastPress.button != button) return sequenceError()
+    
+    def currentTime = now()
+    def startOfPress = state.lastPress?.time
+    def timeDif = currentTime - startOfPress
+    def holdTimeMillisec = (settings.holdTime?:3).toInteger() * 1000
+    
+    state.lastPress = null	//we're done with this. clear it to make error conditions easier to catch
+    
+    if (timeDif < 0) 
+    //likely a message sequence issue or dropped packet. Drop this press and wait for another.
+    	return sequenceError()
+    else if (timeDif < holdTimeMillisec)
+    	return createButtonEvent(button,"pushed")
+    else 
+    	return createButtonEvent(button,"held")
+}
+
+private handleButtonPress(button) {
+	state.lastPress = [button: button, time: now()]
+}
+
+private createButtonEvent(button,action) {
+	logIt "Button ${button} ${action}"
+	return createEvent([
+    	name: "button",
+        value: action, 
+        data:[buttonNumber: button], 
+        descriptionText: "${device.displayName} button ${button} was ${action}",
+        isStateChange: true, 
+        displayed: true])
+}
+
+private getBatteryLevel(rawValue) {
+	def intValue = Integer.parseInt(rawValue,16)
+	def min = 2.1
+    def max = 3.0
+    def vBatt = intValue / 10
+    return ((vBatt - min) / (max - min) * 100) as int
+}
+
+private handlePresenceEvent(present) {
+    def wasPresent = device.currentState("presence")?.value == "present"
+    if (!wasPresent && present) {
+        logIt "Sensor is present"
+        startTimer()
+    } else if (!present) {
+        logIt "Sensor is not present"
+        stopTimer()
+    }
+    def linkText = getLinkText(device)
+    def eventMap = [
+        name: "presence",
+        value: present ? "present" : "not present",
+        linkText: linkText,
+        descriptionText: "${linkText} has ${present ? 'arrived' : 'left'}",
+    ]
+    logIt "Creating presence event: ${eventMap}"
+    sendEvent(eventMap)
+}
+
+private startTimer() {
+    logIt "Scheduling periodic timer"
+    schedule("0 * * * * ?", checkPresenceCallback)
+}
+
+private stopTimer() {
+    logIt "Stopping periodic timer"
+    unschedule()
+}
+
+def checkPresenceCallback() {
+    def timeSinceLastCheckin = (now() - state.lastCheckin) / 1000
+    def theCheckInterval = (checkInterval ? checkInterval as int : 2) * 60
+    logIt "Sensor checked in ${timeSinceLastCheckin} seconds ago"
+    if (timeSinceLastCheckin >= theCheckInterval) {
+        handlePresenceEvent(false)
+    }
+}
+
+// ****** Utility functions ******
+
+private logIt(str, logLevel = 'debug') {if (settings.logging) log."$logLevel"(str) }

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -19,7 +19,6 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
-        capability "Health Check"
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
@@ -54,16 +53,7 @@ def parse(String description) {
 
     def event = zigbee.getEvent(description)
     if (event) {
-        // Temporary fix for the case when Device is OFFLINE and is connected again
+        sendEvent(event)
-        if (state.lastActivity == null){
-            state.lastActivity = now()
-            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-        }
-        state.lastActivity = now()
-        if (event.name=="level" && event.value==0) {}
-        else {
-            sendEvent(event)
-        }
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"
@@ -82,20 +72,6 @@ def on() {
 def setLevel(value) {
     zigbee.setLevel(value)
 }
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-
-    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-        state.lastActivity = null
-        return zigbee.onOffRefresh()
-    } else {
-        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-    }
-}
 
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
@@ -103,7 +79,5 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
-    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -27,10 +27,6 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
-        capability "Health Check"
-
-        attribute "colorName", "string"
-        command "setGenericName"
 
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
@@ -58,15 +54,15 @@ metadata {
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
-        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorName", label: '${currentValue}'
+            state "colorTemperature", label: '${currentValue} K'
         }
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 
         main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorName", "refresh"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
     }
 }
 
@@ -82,22 +78,10 @@ private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 def parse(String description) {
     log.debug "description is $description"
 
-    def event = zigbee.getEvent(description)
+    def finalResult = zigbee.getEvent(description)
-    if (event) {
+    if (finalResult) {
-        log.debug event
+        log.debug finalResult
-        // Temporary fix for the case when Device is OFFLINE and is connected again
+        sendEvent(finalResult)
-        if (state.lastActivity == null){
-            state.lastActivity = now()
-            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-        }
-        state.lastActivity = now()
-        if (event.name=="level" && event.value==0) {}
-        else {
-            if (event.name=="colorTemperature") {
-                setGenericName(event.value)
-            }
-            sendEvent(event)
-        }
     }
     else {
         def zigbeeMap = zigbee.parseDescriptionAsMap(description)
@@ -126,54 +110,20 @@ def on() {
 def off() {
     zigbee.off()
 }
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-
-    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-        state.lastActivity = null
-        return zigbee.onOffRefresh()
-    } else {
-        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-    }
-}
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+    zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
-    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
-    setGenericName(value)
     zigbee.setColorTemperature(value)
 }
 
-//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
-def setGenericName(value){
-    if (value != null) {
-        def genericName = "White"
-        if (value < 3300) {
-            genericName = "Soft White"
-        } else if (value < 4150) {
-            genericName = "Moonlight"
-        } else if (value <= 5000) {
-            genericName = "Cool White"
-        } else if (value >= 5000) {
-            genericName = "Daylight"
-        }
-        sendEvent(name: "colorName", value: genericName)
-    }
-}
-
 def setLevel(value) {
     zigbee.setLevel(value)
 }

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -20,7 +20,6 @@ metadata {
         capability "Switch"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
     }
 
     // simulator metadata

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2015 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -11,133 +11,100 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+/*
+ * Capabilities
+ * - Battery
+ * - Configuration
+ * - Refresh
+ * - Switch
+ * - Valve
+*/
 
 metadata {
-    definition (name: "ZigBee Valve", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Zigbee Valve", namespace: "smartthings", author: "SmartThings") {
-        capability "Actuator"
+		capability "Battery"
-        capability "Battery"
+		capability "Configuration"
-        capability "Configuration"
+		capability "Refresh"
-        capability "Power Source"
+		capability "Switch"
-        capability "Refresh"
+		capability "Valve"
-        capability "Valve"
 
-        fingerprint profileId: "0104", inClusters: "0000, 0001, 0003, 0006, 0020, 0B02, FC02", outClusters: "0019", manufacturer: "WAXMAN", model: "leakSMART Water Valve v2.10", deviceJoinName: "leakSMART Valve"
+		fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0020,0006,0B02", outClusters: "0003"
-        fingerprint profileId: "0104", inClusters: "0000, 0001, 0003, 0004, 0005, 0006, 0008, 000F, 0020, 0B02", outClusters: "0003, 0019", manufacturer: "WAXMAN", model: "House Water Valve - MDL-TBD", deviceJoinName: "Waxman House Water Valve"
+	}
-    }
 
-    // simulator metadata
+	// simulator metadata
-    simulator {
+	simulator {
-        // status messages
+		// status messages
-        status "on": "on/off: 1"
+		status "on": "on/off: 1"
-        status "off": "on/off: 0"
+		status "off": "on/off: 0"
 
-        // reply messages
+		// reply messages
-        reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off on": "on/off: 1"
-        reply "zcl on-off off": "on/off: 0"
+		reply "zcl on-off off": "on/off: 0"
-    }
+	}
 
-    tiles(scale: 2) {
+	// UI tile definitions
-        multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
+	tiles {
-            tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-                attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#53a7c0", nextState:"closing"
+			state "off", label: 'closed', action: "switch.on", icon: "st.Outdoor.outdoor16", backgroundColor: "#e86d13"
-                attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#e86d13", nextState:"opening"
+			state "on", label: 'open', action: "switch.off", icon: "st.Outdoor.outdoor16", backgroundColor: "#53a7c0"
-                attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#53a7c0", nextState:"closing"
+		}
-                attributeState "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#e86d13", nextState:"opening"
+		main "switch"
-            }
+		details(["switch"])
-            tileAttribute ("powerSource", key: "SECONDARY_CONTROL") {
+	}
-                attributeState "powerSource", label:'Power Source: ${currentValue}'
-            }
-        }
-
-        valueTile("battery", "device.battery", inactiveLabel:false, decoration:"flat", width:2, height:2) {
-            state "battery", label:'${currentValue}% battery', unit:""
-        }
-
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        main(["valve"])
-        details(["valve", "battery", "refresh"])
-    }
 }
 
-private getCLUSTER_BASIC() { 0x0000 }
-private getBASIC_ATTR_POWER_SOURCE() { 0x0007 }
-private getCLUSTER_POWER() { 0x0001 }
-private getPOWER_ATTR_BATTERY_PERCENTAGE_REMAINING() { 0x0021 }
-private getTYPE_U8() { 0x20 }
-private getTYPE_ENUM8() { 0x30 }
-
 // Parse incoming device messages to generate events
 def parse(String description) {
-    log.debug "description is $description"
+	log.info description
-    def event = zigbee.getEvent(description)
+	if (description?.startsWith("catchall:")) {
-    if (event) {
+        def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-        if(event.name == "switch") {
+		def result = createEvent(name: name, value: value)
-            event.name = "contact"                  //0006 cluster in valve is tied to contact
+        def msg = zigbee.parse(description)
-            if(event.value == "on") {
+		log.debug "Parse returned ${result?.descriptionText}"
-                event.value = "open"
+		return result
-            }
+		log.trace msg
-            else if(event.value == "off") {
+		log.trace "data: $msg.data"
-                event.value = "closed"
+	}
-            }
+	else {
-        }
+		def name = description?.startsWith("on/off: ") ? "switch" : null
-        sendEvent(event)
+		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-    }
+		def result = createEvent(name: name, value: value)
-    else {
+		log.debug "Parse returned ${result?.descriptionText}"
-        def descMap = zigbee.parseDescriptionAsMap(description)
+		return result
-        if (descMap.clusterInt == CLUSTER_BASIC && descMap.attrInt == BASIC_ATTR_POWER_SOURCE){
+	}
-            def value = descMap.value
+}
-            if (value == "01" || value == "02") {
+
-                sendEvent(name: "powerSource", value: "Mains")
+// Commands to device
-            }
+def on() {
-            else if (value == "03") {
+	log.debug "on()"
-                sendEvent(name: "powerSource", value: "Battery")
+	sendEvent(name: "switch", value: "on")
-            }
+	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
-            else if (value == "04") {
+}
-                sendEvent(name: "powerSource", value: "DC")
+
-            }
+def off() {
-            else {
+	log.debug "off()"
-                sendEvent(name: "powerSource", value: "Unknown")
+	sendEvent(name: "switch", value: "off")
-            }
+	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
-        }
-        else if (descMap.clusterInt == CLUSTER_POWER && descMap.attrInt == POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) {
-            event.name = "battery"
-            event.value = Math.round(Integer.parseInt(descMap.value, 16) / 2)
-            sendEvent(event)
-        }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug descMap
-        }
-    }
 }
 
 def open() {
-    zigbee.on()
+	log.debug "on()"
+	sendEvent(name: "switch", value: "on")
+	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
 }
 
 def close() {
-    zigbee.off()
+	log.debug "off()"
+	sendEvent(name: "switch", value: "off")
+	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
 }
 
 def refresh() {
-    log.debug "refresh called"
+	log.debug "sending refresh command"
-    zigbee.onOffRefresh() +
+	"st rattr 0x${device.deviceNetworkId} 1 6 0"
-    zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
-    zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) +
-    zigbee.onOffConfig() +
-    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
-    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1)
 }
 
 def configure() {
-    log.debug "Configuring Reporting and Bindings."
+
-    zigbee.onOffConfig() +
+	"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}"
-    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
-    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1) +
-    zigbee.onOffRefresh() +
-    zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
-    zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING)
 }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -22,7 +22,6 @@ metadata {
         capability "Actuator"
         capability "Color Temperature"
         capability "Configuration"
-        capability "Health Check"
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
@@ -50,6 +49,9 @@ metadata {
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
                 attributeState "level", action:"switch level.setLevel"
             }
+            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
+                attributeState "colorName", label:'${currentValue}'
+            }
         }
 
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
@@ -59,12 +61,12 @@ metadata {
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
-        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorName", label: '${currentValue}'
+            state "colorTemperature", label: '${currentValue} K'
         }
 
         main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorName", "refresh"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
     }
 }
 
@@ -73,19 +75,7 @@ def parse(String description) {
     log.debug "description is $description"
     def event = zigbee.getEvent(description)
     if (event) {
-        // Temporary fix for the case when Device is OFFLINE and is connected again
+        sendEvent(event)
-        if (state.lastActivity == null){
-            state.lastActivity = now()
-            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-        }
-        state.lastActivity = now()
-        if (event.name=="level" && event.value==0) {}
-        else {
-            if (event.name=="colorTemperature") {
-                setGenericName(event.value)
-            }
-            sendEvent(event)
-        }
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"
@@ -105,29 +95,12 @@ def setLevel(value) {
     zigbee.setLevel(value)
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-
-    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-        state.lastActivity = null
-        return zigbee.onOffRefresh()
-    } else {
-        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-    }
-}
-
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
-    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -1,205 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings") {
-		capability "Switch Level"
-		capability "Actuator"
-		capability "Switch"
-		capability "Polling"
-		capability "Refresh"
-		capability "Sensor"
-
-		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
-	}
-
-	simulator {
-		status "on":  "command: 2003, payload: FF"
-		status "off": "command: 2003, payload: 00"
-		status "09%": "command: 2003, payload: 09"
-		status "10%": "command: 2003, payload: 0A"
-		status "33%": "command: 2003, payload: 21"
-		status "66%": "command: 2003, payload: 42"
-		status "99%": "command: 2003, payload: 63"
-
-		// reply messages
-		reply "2001FF,delay 5000,2602": "command: 2603, payload: FF"
-		reply "200100,delay 5000,2602": "command: 2603, payload: 00"
-		reply "200119,delay 5000,2602": "command: 2603, payload: 19"
-		reply "200132,delay 5000,2602": "command: 2603, payload: 32"
-		reply "20014B,delay 5000,2602": "command: 2603, payload: 4B"
-		reply "200163,delay 5000,2602": "command: 2603, payload: 63"
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-		}
-
-		standardTile("refresh", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "level", label:'${currentValue} %', unit:"%", backgroundColor:"#ffffff"
-		}
-
-		main(["switch"])
-		details(["switch", "level", "refresh"])
-
-	}
-}
-
-def parse(String description) {
-	def result = null
-	if (description != "updated") {
-		log.debug "parse() >> zwave.parse($description)"
-		def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
-		if (cmd) {
-			result = zwaveEvent(cmd)
-		}
-	}
-	if (result?.name == 'hail' && hubFirmwareLessThan("000.011.00602")) {
-		result = [result, response(zwave.basicV1.basicGet())]
-		log.debug "Was hailed: requesting state update"
-	} else {
-		log.debug "Parse returned ${result?.descriptionText}"
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	dimmerEvents(cmd)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	dimmerEvents(cmd)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelReport cmd) {
-	dimmerEvents(cmd)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelSet cmd) {
-	dimmerEvents(cmd)
-}
-
-private dimmerEvents(physicalgraph.zwave.Command cmd) {
-	def value = (cmd.value ? "on" : "off")
-	def result = [createEvent(name: "switch", value: value)]
-	if (cmd.value && cmd.value <= 100) {
-		result << createEvent(name: "level", value: cmd.value, unit: "%")
-	}
-	return result
-}
-
-
-def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
-	log.debug "ConfigurationReport $cmd"
-	def value = "when off"
-	if (cmd.configurationValue[0] == 1) {value = "when on"}
-	if (cmd.configurationValue[0] == 2) {value = "never"}
-	createEvent([name: "indicatorStatus", value: value])
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
-	createEvent([name: "hail", value: "hail", descriptionText: "Switch button was pressed", displayed: false])
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-	log.debug "manufacturerName: ${cmd.manufacturerName}"
-	log.debug "productId:        ${cmd.productId}"
-	log.debug "productTypeId:    ${cmd.productTypeId}"
-	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-	updateDataValue("MSR", msr)
-	updateDataValue("manufacturer", cmd.manufacturerName)
-	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStopLevelChange cmd) {
-	[createEvent(name:"switch", value:"on"), response(zwave.switchMultilevelV1.switchMultilevelGet().format())]
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	// Handles all Z-Wave commands we aren't interested in
-	[:]
-}
-
-def on() {
-	delayBetween([
-			zwave.basicV1.basicSet(value: 0xFF).format(),
-			zwave.switchMultilevelV1.switchMultilevelGet().format()
-	],5000)
-}
-
-def off() {
-	delayBetween([
-			zwave.basicV1.basicSet(value: 0x00).format(),
-			zwave.switchMultilevelV1.switchMultilevelGet().format()
-	],5000)
-}
-
-def setLevel(value) {
-	log.debug "setLevel >> value: $value"
-	def valueaux = value as Integer
-	def level = Math.max(Math.min(valueaux, 99), 0)
-	if (level > 0) {
-		sendEvent(name: "switch", value: "on")
-	} else {
-		sendEvent(name: "switch", value: "off")
-	}
-	sendEvent(name: "level", value: level, unit: "%")
-	delayBetween ([zwave.basicV1.basicSet(value: level).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
-}
-
-def setLevel(value, duration) {
-	log.debug "setLevel >> value: $value, duration: $duration"
-	def valueaux = value as Integer
-	def level = Math.max(Math.min(valueaux, 99), 0)
-	def dimmingDuration = duration < 128 ? duration : 128 + Math.round(duration / 60)
-	def getStatusDelay = duration < 128 ? (duration*1000)+2000 : (Math.round(duration / 60)*60*1000)+2000
-	delayBetween ([zwave.switchMultilevelV2.switchMultilevelSet(value: level, dimmingDuration: dimmingDuration).format(),
-				   zwave.switchMultilevelV1.switchMultilevelGet().format()], getStatusDelay)
-}
-
-def poll() {
-	zwave.switchMultilevelV1.switchMultilevelGet().format()
-}
-
-def refresh() {
-	log.debug "refresh() is called"
-	def commands = []
-	commands << zwave.switchMultilevelV1.switchMultilevelGet().format()
-	if (getDataValue("MSR") == null) {
-		commands << zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
-	}
-	delayBetween(commands,100)
-}
-
-def invertSwitch(invert=true) {
-	if (invert) {
-		zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 4, size: 1).format()
-	}
-	else {
-		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
-	}
-}

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -28,6 +28,7 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x86,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -35,7 +36,6 @@ metadata {
 		// status messages
 		status "open":  "command: 2001, payload: FF"
 		status "closed": "command: 2001, payload: 00"
-		status "wake up": "command: 8407, payload: "
 	}
 
 	// UI tile definitions
@@ -81,7 +81,7 @@ def updated() {
 	def cmds = []
 	if (!state.MSR) {
 		cmds = [
-			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
+			zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
 			"delay 1200",
 			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 		]
@@ -94,9 +94,9 @@ def updated() {
 }
 
 def configure() {
-	commands([
+	delayBetween([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
-		zwave.batteryV1.batteryGet()
+		batteryGetCommand()
 	], 6000)
 }
 
@@ -147,11 +147,12 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 			result << sensorValueEvent(1)
 		} else if (cmd.event == 0x03) {
 			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId))
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
 			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
 		} else if (cmd.event == 0x07) {
-			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 			result << createEvent(name: "motion", value: "active", descriptionText:"$device.displayName detected motion")
 		}
 	} else if (cmd.notificationType) {
@@ -169,11 +170,12 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	def event = createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
 	def cmds = []
 	if (!state.MSR) {
-		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		cmds << zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId).format()
+		cmds << zwave.manufacturerSpecificV2.manufacturerSpecificGet().format()
 		cmds << "delay 1200"
 	}
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
-		cmds << command(zwave.batteryV1.batteryGet())
+		cmds << batteryGetCommand()
 	} else {
 		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 	}
@@ -210,7 +212,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 		if (msr == "0086-0102-0059") {
 			result << response(zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format())
 		} else {
-			result << response(command(zwave.batteryV1.batteryGet()))
+			result << response(batteryGetCommand())
 		}
 	}
 
@@ -218,7 +220,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x85: 2, 0x70: 1])
 	// log.debug "encapsulated: $encapsulatedCommand"
 	if (encapsulatedCommand) {
 		state.sec = 1
@@ -230,16 +232,12 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
 }
 
-private command(physicalgraph.zwave.Command cmd) {
+def batteryGetCommand() {
-	if (state.sec == 1) {
+	def cmd = zwave.batteryV1.batteryGet()
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	if (state.sec) {
-	} else {
+		cmd = zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd)
-		cmd.format()
 	}
-}
+	cmd.format()
-
-private commands(commands, delay=200) {
-	delayBetween(commands.collect{ command(it) }, delay)
 }
 
 def retypeBasedOnMSR() {
@@ -262,12 +260,8 @@ def retypeBasedOnMSR() {
 			setDeviceType("3-in-1 Multisensor Plus (SG)")
 			break
 		case "0109-2001-0106":  // Vision door/window
-			log.debug "Changing device type to Z-Wave Plus Door/Window Sensor"
+			log.debug "Changing device type to Door / Window Sensor Plus (SG)"
-			setDeviceType("Z-Wave Plus Door/Window Sensor")
+			setDeviceType("Door / Window Sensor Plus (SG)")
-			break
-		case "0109-2002-0205": // Vision Motion
-			log.debug "Changing device type to Z-Wave Plus Motion/Temp Sensor"
-			setDeviceType("Z-Wave Plus Motion/Temp Sensor")
 			break
 	}
 }

devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy

@@ -1,270 +0,0 @@
-/**
-*	Copyright 2016 SmartThings
-*	Copyright 2015 AstraLink
-*
-*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
-*	in compliance with the License. You may obtain a copy of the License at:
-*
-*		http://www.apache.org/licenses/LICENSE-2.0
-*
-*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
-*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
-*	for the specific language governing permissions and limitations under the License.
-*
-*	Z-Wave Plus Door/Window Sensor, ZD2102*-5
-*
-*/
-
-metadata {
-	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
-		capability "Contact Sensor"
-		capability "Configuration"
-		capability "Battery"
-		capability "Sensor"
-
-		// for Astralink
-		attribute "ManufacturerCode", "string"
-		attribute "ProduceTypeCode", "string"
-		attribute "ProductCode", "string"
-		attribute "WakeUp", "string"
-		attribute "WirelessConfig", "string"
-
-		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x70, 0x84, 0x7A"
-		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,71"
-		fingerprint mfr:"0109", prod:"2001", model:"0106"  // not using deviceJoinName because it's sold under different brand names
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
-			}
-		}
-		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-
-		main (["contact"])
-		details(["contact","battery"])
-	}
-
-	simulator {
-		// messages the device returns in response to commands it receives
-		status "open (basic)" : "command: 9881, payload: 00 20 01 FF"
-		status "closed (basic)" : "command: 9881 payload: 00 20 01 00"
-		status "open (notification)" : "command: 9881, payload: 00 71 05 06 FF 00 FF 06 16 00 00"
-		status "closed (notification)" : "command: 9881, payload: 00 71 05 06 00 00 FF 06 17 00 00"
-		status "tamper: enclosure opened" : "command: 9881, payload: 00 71 05 07 FF 00 FF 07 03 00 00"
-		status "tamper: enclosure replaced" : "command: 9881, payload: 00 71 05 07 00 00 FF 07 00 00 00"
-		status "wake up" : "command: 9881, payload: 00 84 07"
-		status "battery (100%)" : "command: 9881, payload: 00 80 03 64"
-		status "battery low" : "command: 9881, payload: 00 80 03 FF"
-	}
-}
-
-def configure() {
-	log.debug "configure()"
-	def cmds = []
-
-	if (state.sec != 1) {
-		// secure inclusion may not be complete yet
-		cmds << "delay 1000"
-	}
-
-	cmds += secureSequence([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
-		zwave.batteryV1.batteryGet(),
-	], 500)
-
-	cmds << "delay 8000"
-	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
-	return cmds
-}
-
-private getCommandClassVersions() {
-	[
-		0x71: 3,  // Notification
-		0x5E: 2,  // ZwaveplusInfo
-		0x59: 1,  // AssociationGrpInfo
-		0x85: 2,  // Association
-		0x20: 1,  // Basic
-		0x80: 1,  // Battery
-		0x70: 1,  // Configuration
-		0x5A: 1,  // DeviceResetLocally
-		0x7A: 2,  // FirmwareUpdateMd
-		0x72: 2,  // ManufacturerSpecific
-		0x73: 1,  // Powerlevel
-		0x98: 1,  // Security
-		0x84: 2,  // WakeUp
-		0x86: 1,  // Version
-	]
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	def result = []
-	def cmd
-	if (description.startsWith("Err 106")) {
-		state.sec = 0
-		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
-				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
-	} else if (description.startsWith("Err")) {
-		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
-	} else {
-		cmd = zwave.parse(description, commandClassVersions)
-		if (cmd) {
-			result = zwaveEvent(cmd)
-		}
-	}
-
-	if (result instanceof List) {
-		result = result.flatten()
-	}
-
-	log.debug "Parsed '$description' to $result"
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
-	log.debug "encapsulated: $encapsulatedCommand"
-	if (encapsulatedCommand) {
-		state.sec = 1
-		return zwaveEvent(encapsulatedCommand)
-	} else {
-		log.warn "Unable to extract encapsulated cmd from $cmd"
-		return [createEvent(descriptionText: cmd.toString())]
-	}
-}
-
-def sensorValueEvent(value) {
-	if (value) {
-		createEvent(name: "contact", value: "open", descriptionText: "$device.displayName is open")
-	} else {
-		createEvent(name: "contact", value: "closed", descriptionText: "$device.displayName is closed")
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
-	return sensorValueEvent(cmd.sensorValue)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
-	return sensorValueEvent(cmd.sensorState)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
-	def result = []
-	if (cmd.notificationType == 0x06 && cmd.event == 0x16) {
-		result << sensorValueEvent(1)
-	} else if (cmd.notificationType == 0x06 && cmd.event == 0x17) {
-		result << sensorValueEvent(0)
-	} else if (cmd.notificationType == 0x07) {
-		if (cmd.event == 0x00) {
-			if (cmd.eventParametersLength == 0 || cmd.eventParameter[0] != 3) {
-				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
-			} else {
-				result << sensorValueEvent(0)
-			}
-		} else if (cmd.event == 0x01 || cmd.event == 0x02) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x03) {
-			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			if (!device.currentState("ManufacturerCode")) {
-				result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
-			}
-		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
-			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
-		} else {
-			result << createEvent(descriptionText: "$device.displayName event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
-		}
-	} else if (cmd.notificationType) {
-		result << createEvent(descriptionText: "$device.displayName notification $cmd.notificationType event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
-	} else {
-		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
-		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, isStateChange: true, displayed: false)
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
-	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
-	def cmds = []
-
-	if (!device.currentState("ManufacturerCode")) {
-		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-		cmds << "delay 2000"
-	}
-	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
-		event.descriptionText += ", requesting battery"
-		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
-		cmds << "delay 800"
-		cmds << secure(zwave.batteryV1.batteryGet())
-		cmds << "delay 2000"
-	} else {
-		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
-	}
-	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
-
-	return [event, response(cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-	def event = createEvent(map)
-
-	// Save at least one battery report in events list every few days
-	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
-		map.isStateChange = true
-	}
-	state.lastbat = now()
-	return [event]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	def result = []
-	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
-	def productTypeCode = String.format("%04X", cmd.productTypeId)
-	def productCode = String.format("%04X", cmd.productId)
-	def wirelessConfig = "ZWP"
-	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
-
-	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
-	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
-	result << createEvent(name: "ProductCode", value: productCode)
-	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
-
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
-}
-
-private secure(physicalgraph.zwave.Command cmd) {
-	if (state.sec == 0) {  // default to secure
-		cmd.format()
-	} else {
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	}
-}
-
-private secureSequence(commands, delay=200) {
-	delayBetween(commands.collect{ secure(it) }, delay)
-}

devicetypes/smartthings/zwave-plus-motion-temp-sensor.src/zwave-plus-motion-temp-sensor.groovy

@@ -1,327 +0,0 @@
-/**
-*	Copyright 2016 SmartThings
-*	Copyright 2015 AstraLink
-*
-*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
-*	in compliance with the License. You may obtain a copy of the License at:
-*
-*		http://www.apache.org/licenses/LICENSE-2.0
-*
-*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
-*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
-*	for the specific language governing permissions and limitations under the License.
-*
-*	Z-Wave Plus Motion Sensor with Temperature Measurement, ZP3102*-5
-*
-*/
-
-metadata {
-	definition (name: "Z-Wave Plus Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
-		capability "Motion Sensor"
-		capability "Temperature Measurement"
-		capability "Configuration"
-		capability "Battery"
-		capability "Sensor"
-
-		// for Astralink
-		attribute "ManufacturerCode", "string"
-		attribute "ProduceTypeCode", "string"
-		attribute "ProductCode", "string"
-		attribute "WakeUp", "string"
-		attribute "WirelessConfig", "string"
-				
-		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x31, 0x70, 0x84, 0x7A"
-		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,31,71"
-		fingerprint mfr:"0109", prod:"2002", model:"0205"  // not using deviceJoinName because it's sold under different brand names
-	}
-
-	tiles {
-		standardTile("motion", "device.motion", width: 3, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
-		}
-
-		valueTile("temperature", "device.temperature", inactiveLabel: false) {
-			state "temperature", label:'${currentValue}°',
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
-		}
-		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
-			state "battery", label:'${currentValue}% battery', unit:"%"
-		}
-
-		main(["motion", "temperature"])
-		details(["motion", "temperature", "battery"])
-	}
-}
-
-def updated() {
-	if (!device.currentState("ManufacturerCode")) {
-		response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
-	}
-}
-
-def configure() {
-	log.debug "configure()"
-	def cmds = []
-
-	if (state.sec != 1) {
-		// secure inclusion may not be complete yet
-		cmds << "delay 1000"
-	}
-
-	cmds += secureSequence([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
-		zwave.batteryV1.batteryGet(),
-		zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
-	], 500)
-
-	cmds << "delay 8000"
-	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
-	return cmds
-}
-
-private getCommandClassVersions() {
-	[
-		0x71: 3,  // Notification
-		0x5E: 2,  // ZwaveplusInfo
-		0x59: 1,  // AssociationGrpInfo
-		0x85: 2,  // Association
-		0x20: 1,  // Basic
-		0x80: 1,  // Battery
-		0x70: 1,  // Configuration
-		0x5A: 1,  // DeviceResetLocally
-		0x7A: 2,  // FirmwareUpdateMd
-		0x72: 2,  // ManufacturerSpecific
-		0x73: 1,  // Powerlevel
-		0x98: 1,  // Security
-		0x31: 5,  // SensorMultilevel
-		0x84: 2	  // WakeUp
-	]
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	def result = []
-	def cmd
-	if (description.startsWith("Err 106")) {
-		state.sec = 0
-		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
-				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
-	} else if (description.startsWith("Err")) {
-		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
-	} else {
-		cmd = zwave.parse(description, commandClassVersions)
-		if (cmd) {
-			result = zwaveEvent(cmd)
-		}
-	}
-
-	if (result instanceof List) {
-		result = result.flatten()
-	}
-
-	log.debug "Parsed '$description' to $result"
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
-	log.debug "encapsulated: $encapsulatedCommand"
-	if (encapsulatedCommand) {
-		state.sec = 1
-		return zwaveEvent(encapsulatedCommand)
-	} else {
-		log.warn "Unable to extract encapsulated cmd from $cmd"
-		return [createEvent(descriptionText: cmd.toString())]
-	}
-}
-
-def sensorValueEvent(value) {
-	def result = []
-	if (value) {
-		log.debug "sensorValueEvent($value) : active"
-		result << createEvent(name: "motion", value: "active", descriptionText: "$device.displayName detected motion")
-	} else {
-		log.debug "sensorValueEvent($value) : inactive"
-		result << createEvent(name: "motion", value: "inactive", descriptionText: "$device.displayName motion has stopped")
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
-	return sensorValueEvent(cmd.sensorValue)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
-	return sensorValueEvent(cmd.sensorState)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
-	def result = []
-	if (cmd.notificationType == 0x07) {
-		if (cmd.event == 0x01 || cmd.event == 0x02) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x03) {
-			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
-		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
-			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
-		} else if (cmd.event == 0x07) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x08) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x00) {
-			if (cmd.eventParametersLength && cmd.eventParameter[0] == 3) {
-				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
-			} else {
-				result << sensorValueEvent(0)
-			}
-		} else if (cmd.event == 0xFF) {
-			result << sensorValueEvent(1)
-		} else {
-			result << createEvent(descriptionText: "$device.displayName sent event $cmd.event")
-		}
-	} else if (cmd.notificationType) {
-		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
-		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
-	} else {
-		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
-		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
-	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
-	def cmds = []
-
-	if (!device.currentState("ManufacturerCode")) {
-		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-		cmds << "delay 2000"
-	}
-	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
-		event.descriptionText += ", requesting battery"
-		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
-		cmds << "delay 800"
-		cmds << secure(zwave.batteryV1.batteryGet())
-		cmds << "delay 2000"
-	} else {
-		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
-	}
-	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
-
-	return [event, response(cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def result = []
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-	def event = createEvent(map)
-
-	// Save at least one battery report in events list every few days
-	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
-		map.isStateChange = true
-	}
-	state.lastbat = now()
-	return [event]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
-	def result = []
-	def map = [:]
-	switch (cmd.sensorType) {
-		case 1:
-			def cmdScale = cmd.scale == 1 ? "F" : "C"
-			map.name = "temperature"
-			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
-			map.unit = getTemperatureScale()
-			break;
-		case 3:
-			map.name = "illuminance"
-			map.value = cmd.scaledSensorValue.toInteger().toString()
-			map.unit = "lux"
-			break;
-		case 5:
-			map.name = "humidity"
-			map.value = cmd.scaledSensorValue.toInteger().toString()
-			map.unit = cmd.scale == 0 ? "%" : ""
-			break;
-		case 0x1E:
-			map.name = "loudness"
-			map.unit = cmd.scale == 1 ? "dBA" : "dB"
-			map.value = cmd.scaledSensorValue.toString()
-			break;
-		default:
-			map.descriptionText = cmd.toString()
-	}
-	result << createEvent(map)
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	def result = []
-	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
-	def productTypeCode = String.format("%04X", cmd.productTypeId)
-	def productCode = String.format("%04X", cmd.productId)
-	def wirelessConfig = "ZWP"
-	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
-	
-	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
-	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
-	result << createEvent(name: "ProductCode", value: productCode)
-	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
-
-	if (manufacturerCode == "0109" && productTypeCode == "2002") {
-		result << response(secureSequence([
-			// Change re-trigger duration to 1 minute
-			zwave.configurationV1.configurationSet(parameterNumber: 1, configurationValue: [1], size: 1),
-			zwave.batteryV1.batteryGet(),
-			zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
-		], 400))
-	}
-
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
-}
-
-private secure(physicalgraph.zwave.Command cmd) {
-	if (state.sec == 0) {  // default to secure
-		cmd.format()
-	} else {
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	}
-}
-
-private secureSequence(commands, delay=200) {
-	delayBetween(commands.collect{ secure(it) }, delay)
-}

devicetypes/smartthings/zwave-plus-window-shade.src/zwave-plus-window-shade.groovy

@@ -0,0 +1,244 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Z-Wave Plus Window Shade", namespace: "smartthings", author: "SmartThings") {
+		capability "Window Shade"
+		capability "Battery"
+		capability "Refresh"
+		capability "Health Check"
+		capability "Actuator"
+		capability "Sensor"
+
+		command "stop"
+
+		capability "Switch Level"   // until we get a Window Shade Level capability
+		capability "Switch"  // temporary for use with Routines
+
+		// This device handler is specifically for position-aware window coverings
+		//
+		fingerprint type: "0x1107", cc: "0x5E,0x26", deviceJoinName: "Window Shade"
+		fingerprint type: "0x9A00", cc: "0x5E,0x26", deviceJoinName: "Window Shade"
+		fingerprint mfr:"026E", prod:"4353", model:"5A31", deviceJoinName: "Window Blinds"
+		fingerprint mfr:"026E", prod:"5253", model:"5A31", deviceJoinName: "Roller Shade"
+	}
+
+	simulator {
+		status "open":  "command: 2603, payload: FF"
+		status "closed": "command: 2603, payload: 00"
+		status "10%": "command: 2603, payload: 0A"
+		status "66%": "command: 2603, payload: 42"
+		status "99%": "command: 2603, payload: 63"
+		status "battery 100%": "command: 8003, payload: 64"
+		status "battery low": "command: 8003, payload: FF"
+
+		// reply messages
+		reply "2001FF,delay 1000,2602": "command: 2603, payload: 10 FF FE"
+		reply "200100,delay 1000,2602": "command: 2603, payload: 60 00 FE"
+		reply "200142,delay 1000,2602": "command: 2603, payload: 10 42 FE"
+		reply "200163,delay 1000,2602": "command: 2603, payload: 10 63 FE"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"windowShade", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.windowShade", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'${name}', action:"close", icon:"st.doors.garage.garage-open", backgroundColor:"#79b821", nextState:"closing"
+				attributeState "closed", label:'${name}', action:"open", icon:"st.doors.garage.garage-closed", backgroundColor:"#ffffff", nextState:"opening"
+				attributeState "partiallyOpen", label:'Open', action:"close", icon:"st.doors.garage.garage-open", backgroundColor:"#79b821", nextState:"closing"
+				attributeState "opening", label:'${name}', action:"stop", icon:"st.doors.garage.garage-opening", backgroundColor:"#79b821", nextState:"partiallyOpen"
+				attributeState "closing", label:'${name}', action:"stop", icon:"st.doors.garage.garage-closing", backgroundColor:"#ffffff", nextState:"partiallyOpen"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"setLevel"
+			}
+		}
+
+		standardTile("refresh", "device.refresh", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh", nextState: "disabled"
+			state "disabled", label:'', action:"", icon:"st.secondary.refresh"
+		}
+
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		preferences {
+			input "preset", "number", title: "Default half-open position (1-100)", defaultValue: 50, required: false, displayDuringSetup: false
+		}
+
+		main(["windowShade"])
+		details(["windowShade", "refresh", "battery"])
+
+	}
+}
+
+def parse(String description) {
+	def result = null
+	//if (description =~ /command: 2603, payload: ([0-9A-Fa-f]{6})/)
+	// TODO: Workaround manual parsing of v4 multilevel report
+	def cmd = zwave.parse(description, [0x20: 1, 0x26: 3])  // TODO: switch to SwitchMultilevel v4 and use target value
+	if (cmd) {
+		result = zwaveEvent(cmd)
+	}
+	log.debug "Parsed '$description' to ${result.inspect()}"
+	return result
+}
+
+def getCheckInterval() {
+	// These are battery-powered devices, and it's not very critical
+	// to know whether they're online or not – 12 hrs
+	12 * 60 * 60
+}
+
+def installed() {
+	sendEvent(name: "checkInterval", value: checkInterval, displayed: false)
+}
+
+def updated() {
+	if (device.latestValue("checkInterval") != checkInterval) {
+		sendEvent(name: "checkInterval", value: checkInterval, displayed: false)
+	}
+	if (!device.latestState("battery")) {
+		response(zwave.batteryV1.batteryGet())
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	handleLevelReport(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	handleLevelReport(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelReport cmd) {
+	handleLevelReport(cmd)
+}
+
+private handleLevelReport(physicalgraph.zwave.Command cmd) {
+	def descriptionText = null
+	def shadeValue = null
+
+	def level = cmd.value as Integer
+	if (level >= 99) {
+		level = 99
+		shadeValue = "open"
+	} else if (level <= 0) {
+		level = 0  // unlike dimmer switches, the level isn't saved when closed
+		shadeValue = "closed"
+	} else {
+		shadeValue = "partiallyOpen"
+		descriptionText = "${device.displayName} shade is ${level}% open"
+	}
+	def levelEvent = createEvent(name: "level", value: level, unit: "%", displayed: false)
+	def stateEvent = createEvent(name: "windowShade", value: shadeValue, descriptionText: descriptionText, isStateChange: levelEvent.isStateChange)
+
+	def result = [stateEvent, levelEvent]
+	if (!state.lastbatt || now() - state.lastbatt > 24 * 60 * 60 * 1000) {
+		log.debug "requesting battery"
+		state.lastbatt = (now() - 23 * 60 * 60 * 1000) // don't queue up multiple battery reqs in a row
+		result << response(["delay 15000", zwave.batteryV1.batteryGet().format()])
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelStopLevelChange cmd) {
+	[ createEvent(name: "windowShade", value: "partiallyOpen", displayed: false, descriptionText: "$device.displayName shade stopped"),
+	  response(zwave.switchMultilevelV1.switchMultilevelGet().format()) ]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	updateDataValue("MSR", msr)
+	if (cmd.manufacturerName) {
+		updateDataValue("manufacturer", cmd.manufacturerName)
+	}
+	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	state.lastbatt = now()
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "unhandled $cmd"
+	return []
+}
+
+def open() {
+	log.debug "open()"
+	/*delayBetween([
+			zwave.basicV1.basicSet(value: 0xFF).format(),
+			zwave.switchMultilevelV1.switchMultilevelGet().format()
+	], 1000)*/
+	zwave.basicV1.basicSet(value: 0xFF).format()
+}
+
+def close() {
+	log.debug "close()"
+	/*delayBetween([
+			zwave.basicV1.basicSet(value: 0x00).format(),
+			zwave.switchMultilevelV1.switchMultilevelGet().format()
+	], 1000)*/
+	zwave.basicV1.basicSet(value: 0).format()
+}
+
+def on() {
+	open()
+}
+
+def off() {
+	close()
+}
+
+def setLevel(value, duration = null) {
+	log.debug "setLevel(${value.inspect()})"
+	Integer level = value as Integer
+	if (level < 0) level = 0
+	if (level > 99) level = 99
+	if (!preset && level > 0 && level < 95) state.preset = level
+	delayBetween([
+			zwave.basicV1.basicSet(value: level).format(),
+			zwave.switchMultilevelV1.switchMultilevelGet().format()
+	])
+}
+
+def presetPosition() {
+	setLevel(preset ?: state.preset ?: 50)
+}
+
+def stop() {
+	log.debug "stop()"
+	zwave.switchMultilevelV3.switchMultilevelStopLevelChange().format()
+}
+
+def ping() {
+	zwave.switchMultilevelV1.switchMultilevelGet().format()
+}
+
+def refresh() {
+	log.debug "refresh()"
+	delayBetween([
+			zwave.switchMultilevelV1.switchMultilevelGet().format(),
+			zwave.batteryV1.batteryGet().format()
+	], 1500)
+}

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -1,143 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Z-Wave Switch Generic", namespace: "smartthings", author: "SmartThings") {
-		capability "Actuator"
- 		capability "Switch"
-		capability "Polling"
-		capability "Refresh"
-		capability "Sensor"
-
-		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
-	}
-
-	// simulator metadata
-	simulator {
-		status "on":  "command: 2003, payload: FF"
-		status "off": "command: 2003, payload: 00"
-
-		// reply messages
-		reply "2001FF,delay 100,2502": "command: 2503, payload: FF"
-		reply "200100,delay 100,2502": "command: 2503, payload: 00"
-	}
-
-	// tile definitions
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
-				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
-			}
-		}
-
-		standardTile("refresh", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main "switch"
-		details(["switch","refresh"])
-	}
-}
-
-def parse(String description) {
-	def result = null
-	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
-	if (cmd) {
-		result = createEvent(zwaveEvent(cmd))
-	}
-	if (result?.name == 'hail' && hubFirmwareLessThan("000.011.00602")) {
-		result = [result, response(zwave.basicV1.basicGet())]
-		log.debug "Was hailed: requesting state update"
-	} else {
-		log.debug "Parse returned ${result?.descriptionText}"
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	[name: "switch", value: cmd.value ? "on" : "off", type: "physical"]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	[name: "switch", value: cmd.value ? "on" : "off", type: "physical"]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
-	[name: "switch", value: cmd.value ? "on" : "off", type: "digital"]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
-	def value = "when off"
-	if (cmd.configurationValue[0] == 1) {value = "when on"}
-	if (cmd.configurationValue[0] == 2) {value = "never"}
-	[name: "indicatorStatus", value: value, display: false]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
-	[name: "hail", value: "hail", descriptionText: "Switch button was pressed", displayed: false]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-	log.debug "manufacturerName: ${cmd.manufacturerName}"
-	log.debug "productId:        ${cmd.productId}"
-	log.debug "productTypeId:    ${cmd.productTypeId}"
-	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-	updateDataValue("MSR", msr)
-	updateDataValue("manufacturer", cmd.manufacturerName)
-	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
-}
-
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	// Handles all Z-Wave commands we aren't interested in
-	[:]
-}
-
-def on() {
-	delayBetween([
-		zwave.basicV1.basicSet(value: 0xFF).format(),
-		zwave.switchBinaryV1.switchBinaryGet().format()
-	])
-}
-
-def off() {
-	delayBetween([
-		zwave.basicV1.basicSet(value: 0x00).format(),
-		zwave.switchBinaryV1.switchBinaryGet().format()
-	])
-}
-
-def poll() {
-	delayBetween([
-		zwave.switchBinaryV1.switchBinaryGet().format(),
-		zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
-	])
-}
-
-def refresh() {
-	delayBetween([
-		zwave.switchBinaryV1.switchBinaryGet().format(),
-		zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
-	])
-}
-
-def invertSwitch(invert=true) {
-	if (invert) {
-		zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 4, size: 1).format()
-	}
-	else {
-		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
-	}
-}

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -15,15 +15,12 @@ metadata {
 	definition (name: "Z-Wave Switch", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Indicator"
- 		capability "Switch"
+		capability "Switch"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
-		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
+		fingerprint inClusters: "0x25"
-		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
-		fingerprint mfr:"0063", prod:"5052", deviceJoinName: "Z-Wave Plug-In Switch"
-		fingerprint mfr:"0113", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
 	}
 
 	// simulator metadata
@@ -36,10 +33,6 @@ metadata {
 		reply "200100,delay 100,2502": "command: 2503, payload: 00"
 	}
 
-	preferences {
-		input "ledIndicator", "enum", title: "LED Indicator", description: "Turn LED indicator... ", required: false, options:["on": "When On", "off": "When Off", "never": "Never"], defaultValue: "off"
-	}
-
 	// tile definitions
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
@@ -59,27 +52,10 @@ metadata {
 		}
 
 		main "switch"
-		details(["switch","refresh"])
+		details(["switch","refresh","indicator"])
 	}
 }
 
-def updated(){
-  switch (ledIndicator) {
-        case "on":
-            indicatorWhenOn()
-            break
-        case "off":
-            indicatorWhenOff()
-            break
-        case "never":
-            indicatorNever()
-            break
-        default:
-            indicatorWhenOn()
-            break
-    }
-}
-
 def parse(String description) {
 	def result = null
 	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
@@ -163,19 +139,19 @@ def refresh() {
 	])
 }
 
-void indicatorWhenOn() {
+def indicatorWhenOn() {
 	sendEvent(name: "indicatorStatus", value: "when on", display: false)
-	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
+	zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()
 }
 
-void indicatorWhenOff() {
+def indicatorWhenOff() {
 	sendEvent(name: "indicatorStatus", value: "when off", display: false)
-	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
+	zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()
 }
 
-void indicatorNever() {
+def indicatorNever() {
 	sendEvent(name: "indicatorStatus", value: "never", display: false)
-	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
+	zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()
 }
 
 def invertSwitch(invert=true) {

smartapps/com-gidjit-smartthings-hub/gidjit-hub.src/gidjit-hub.groovy

@@ -24,24 +24,17 @@ definition(
     iconX3Url: "http://www.gidjit.com/appicon@3x.png",
     oauth: [displayName: "Gidjit", displayLink: "www.gidjit.com"])
 
-preferences(oauthPage: "deviceAuthorization") {
-    // deviceAuthorization page is simply the devices to authorize
-    page(name: "deviceAuthorization", title: "Device Authorization", nextPage: "instructionPage",
-         install: false, uninstall: true) {
-  		section ("Allow Gidjit to have access, thereby allowing you to quickly control and monitor your following devices. Privacy Policy can be found at http://priv.gidjit.com/privacy.html") {
-    		input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
-    		input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
-    		input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
-        }
 
-    }
+
-    page(name: "instructionPage", title: "Device Discovery", install: true) {
+preferences {
-        section() {
+  section ("Allow Gidjit to have access, there by allowing you to quickly control and monitor the following devices") {
-            paragraph "Now the process is complete return to the Devices section of the Detected Screen. From there and you can add actions to each of your device panels, including launching SmartThings routines."
+    input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
-        }
+    input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
-    }
+    input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
+    //input "bulbs", "capability.colorControl", title: "Control your lights", multiple: true, required: false //windowShade
+
+  }
 }
-
 mappings {
   path("/structureinfo") {
     action: [

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -337,10 +337,10 @@ def initialize() {
 
 	settings.devices.each {
 		def deviceId = it
-		def detail = state?.deviceDetail[deviceId]
+		def detail = state.deviceDetail[deviceId]
 
 		try {
-			switch(detail?.type) {
+			switch(detail.type) {
 				case 'NAMain':
 					log.debug "Base station"
 					createChildDevice("Netatmo Basestation", deviceId, "${detail.type}.${deviceId}", detail.module_name)
@@ -487,12 +487,12 @@ def poll() {
     log.debug "State: ${state.deviceState}"
 
 	settings.devices.each { deviceId ->
-		def detail = state?.deviceDetail[deviceId]
+		def detail = state.deviceDetail[deviceId]
-		def data = state?.deviceState[deviceId]
+		def data = state.deviceState[deviceId]
-		def child = children?.find { it.deviceNetworkId == deviceId }
+		def child = children.find { it.deviceNetworkId == deviceId }
 
 		log.debug "Update: $child";
-		switch(detail?.type) {
+		switch(detail.type) {
 			case 'NAMain':
 				log.debug "Updating NAMain $data"
 				child?.sendEvent(name: 'temperature', value: cToPref(data['Temperature']) as float, unit: getTemperatureScale())

smartapps/docwisdom/humidity-alert.src/humidity-alert.groovy

@@ -78,7 +78,7 @@ def humidityHandler(evt) {
 			log.debug "Notification already sent within the last ${deltaMinutes} minutes"
 			
 		} else {
-			log.debug "Humidity Rose Above ${tooHumid}:  sending SMS and activating ${mySwitch}"
+			log.debug "Humidity Rose Above ${tooHumid}:  sending SMS to $phone1 and activating ${mySwitch}"
 			send("${humiditySensor1.label} sensed high humidity level of ${evt.value}")
 			switch1?.on()
 		}
@@ -91,7 +91,7 @@ def humidityHandler(evt) {
 			log.debug "Notification already sent within the last ${deltaMinutes} minutes"
 			
 		} else {
-			log.debug "Humidity Fell Below ${notHumidEnough}:  sending SMS and activating ${mySwitch}"
+			log.debug "Humidity Fell Below ${notHumidEnough}:  sending SMS to $phone1 and activating ${mySwitch}"
 			send("${humiditySensor1.label} sensed high humidity level of ${evt.value}")
 			switch1?.off()
 		}

smartapps/dooglave/let-there-be-dark.src/let-there-be-dark.groovy

@@ -25,11 +25,15 @@ preferences {
 
 def installed() {
 	subscribe(contact1, "contact", contactHandler)
+	subscribe(switch1, "switch.on", switchOnHandler)
+    subscribe(switch1, "switch.off", switchOffHandler)
 }
 
 def updated() {
 	unsubscribe()
 	subscribe(contact1, "contact", contactHandler)
+	subscribe(switch1, "switch.on", switchOnHandler)
+    subscribe(switch1, "switch.off", switchOffHandler)
 }
 
 def contactHandler(evt) {
@@ -42,4 +46,4 @@ def contactHandler(evt) {
 if (evt.value == "closed") {
 	if(state.wasOn)switch1.on()
 }
-}
+}

smartapps/mangioneimagery/medicine-management-contact-sensor.src/medicine-management-contact-sensor.groovy

@@ -1,188 +0,0 @@
-/**
- *  Medicine Management - Contact Sensor
- *
- *  Copyright 2016 Jim Mangione
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- * 
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- * Logic: 
- * --- Send notification at the medicine reminder time IF draw wasn't alread opened in past 60 minutes
- * --- If draw still isn't open 10 minutes AFTER reminder time, LED will turn RED.
- * --- ----- Once draw IS open, LED will return back to it's original color
- *
- */
-import groovy.time.TimeCategory 
-
-definition(
-    name: "Medicine Management - Contact Sensor",
-    namespace: "MangioneImagery",
-    author: "Jim Mangione",
-    description: "This supports devices with capabilities of ContactSensor and ColorControl (LED). It sends an in-app and ambient light notification if you forget to open the drawer or cabinet where meds are stored. A reminder will be set to a single time per day. If the draw or cabinet isn't opened within 60 minutes of that reminder, an in-app message will be sent. If the draw or cabinet still isn't opened after an additional 10 minutes, then an LED light turns red until the draw or cabinet is opened",
-    category: "Health & Wellness",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
-
-
-preferences {
-
-	section("My Medicine Draw/Cabinet"){
-		input "deviceContactSensor", "capability.contactSensor", title: "Opened Sensor" 
-	} 
-
-    section("Remind me to take my medicine at"){
-        input "reminderTime", "time", title: "Time"
-    }
-    
-    // NOTE: Use REAL device - virtual device causes compilation errors
-    section("My LED Light"){
-    	input "deviceLight", "capability.colorControl", title: "Smart light"
-    }
-
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-        
-	initialize()
-}
-
-def initialize() {
-
-    // will stop LED notification incase it was set by med reminder
-    subscribe(deviceContactSensor, "contact", contactHandler)
-
-    // how many minutes to look in the past from the reminder time, for an open draw
-    state.minutesToCheckOpenDraw = 60
-    
-    // is true when LED notification is set after exceeding 10 minutes past reminder time
-    state.ledNotificationTriggered = false
-    
-    // Set a timer to run once a day to notify if draw wasn't opened yet
-    schedule(reminderTime, checkOpenDrawInPast)
-   
-}
-
-// Should turn off any LED notification on OPEN state
-def contactHandler(evt){
-	if (evt.value == "open") {
-        // if LED notification triggered, reset it.
-        log.debug "Cabinet opened"
-        if (state.ledNotificationTriggered) {
-            resetLEDNotification()
-        }
-	}
-}
-
-// If the draw was NOT opened within 60 minutes of the timer send notification out.
-def checkOpenDrawInPast(){
-	log.debug "Checking past 60 minutes of activity from $reminderTime"
-    
-    // check activity of sensor for past 60 minutes for any OPENED status
-    def cabinetOpened = isOpened(state.minutesToCheckOpenDraw)
-	log.debug "Cabinet found opened: $cabinetOpened"
-    
-    // if it's opened, then do nothing and assume they took their meds
-    if (!cabinetOpened) {    
-    	sendNotification("Hi, please remember to take your meds in the cabinet")
-       
-       // if no open activity, send out notification and set new reminder    
-        def reminderTimePlus10 = new Date(now() + (10 * 60000))
-
-        // needs to be scheduled if draw wasn't already opened
-        runOnce(reminderTimePlus10, checkOpenDrawAfterReminder)
-    }
-}
-
-// If the draw was NOT opened after 10 minutes past reminder, use LED notification
-def checkOpenDrawAfterReminder(){
-	log.debug "Checking additional 10 minutes of activity from $reminderTime"
-    
-    // check activity of sensor for past 10 minutes for any OPENED status
-    def cabinetOpened = isOpened(10)    
-    
-   	log.debug "Cabinet found opened: $cabinetOpened"
-        
-    // if no open activity, blink lights
-    if (!cabinetOpened) {
-    	log.debug "Set LED to Notification color"
-        setLEDNotification()
-    }
-    
-}
-
-// Helper function for sending out an app notification
-def sendNotification(msg){
-        log.debug "Message Sent: $msg"
-        sendPush(msg)
-}
-
-// Check if the sensor has been opened since the minutes entered
-// Return true if opened found, else false.
-def isOpened(minutes){
-    // query last X minutes of activity log    
-    def previousDateTime = new Date(now() - (minutes * 60000))
-    
-    // capture all events recorded
-    def evts = deviceContactSensor.eventsSince(previousDateTime)   
-    def cabinetOpened = false
-    if (evts.size() > 0) {
-        evts.each{
-            if(it.value == "open") {
-                cabinetOpened = true 
-            }
-        }
-	}
-    
-    return cabinetOpened
-}
-
-// Saves current color and sets the light to RED
-def setLEDNotification(){
-
-	state.ledNotificationTriggered = true
-    
-	// turn light back off when reset is called if it was originally off
- 	state.ledState = deviceLight.currentValue("switch")
-
-	// set light to RED and store original color until stopped    
-    state.origColor = deviceLight.currentValue("hue")
-    deviceLight.on()
-    deviceLight.setHue(100)
-    
-    log.debug "LED set to RED. Original color stored: $state.origColor"
-
-}
-
-// Sets the color back to the original saved color
-def resetLEDNotification(){
-
-	state.ledNotificationTriggered = false
-    
-    // return color to original
-    log.debug "Reset LED color to: $state.origColor"
-    if (state.origColor != null) {
-    	deviceLight.setHue(state.origColor)
-    }
-    
-    // if the light was turned on just for the notification, turn it back off now
-    if (state.ledState == "off") {
-    	deviceLight.off()
-    }
-
-}

smartapps/mangioneimagery/medicine-management-temp-motion.src/medicine-management-temp-motion.groovy

@@ -1,189 +0,0 @@
-/**
- *  Medicine Management - Temp-Motion
- *
- *  Copyright 2016 Jim Mangione
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- * 
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- * Logic: 
- * --- If temp > threshold set, send notification
- * --- Send in-app notification at the medicine reminder time if no motion is detected in past 60 minutes
- * --- If motion still isn't detected 10 minutes AFTER reminder time, LED will turn RED
- * --- ----- Once motion is detected, LED will turn back to it's original color
- */
-import groovy.time.TimeCategory 
-
-definition(
-    name: "Medicine Management - Temp-Motion",
-    namespace: "MangioneImagery",
-    author: "Jim Mangione",
-    description: "This only supports devices with capabilities TemperatureMeasurement, AccelerationSensor and ColorControl (LED). Supports two use cases. First, will notifies via in-app if the fridge where meds are stored exceeds a temperature threshold set in degrees. Secondly, sends an in-app and ambient light notification if you forget to take your meds by sensing movement of the medicine box in the fridge. A reminder will be set to a single time per day. If the box isn't moved within 60 minutes of that reminder, an in-app message will be sent. If the box still isn't moved after an additional 10 minutes, then an LED light turns red until the box is moved",
-    category: "Health & Wellness",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
-
-
-preferences {
- 
-     section("My Medicine in the Refrigerator"){
-		input "deviceAccelerationSensor", "capability.accelerationSensor", required: true, multiple: false, title: "Movement"
-        input "deviceTemperatureMeasurement", "capability.temperatureMeasurement", required: true, multiple: false, title: "Temperature"
-	} 
-
-	section("Temperature Threshold"){
-    	input "tempThreshold", "number", title: "Temperature Threshold"
-    }
-
-    section("Remind me to take my medicine at"){
-        input "reminderTime", "time", title: "Time"
-    }
-    
-    // NOTE: Use REAL device - virtual device causes compilation errors
-    section("My LED Light"){
-    	input "deviceLight", "capability.colorControl", title: "Smart light"
-    }    
-
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-        
-	initialize()
-}
-
-def initialize() {
-	// will notify when temp exceeds max
-    subscribe(deviceTemperatureMeasurement, "temperature", tempHandler)
-
-    // will stop LED notification incase it was set by med reminder
-    subscribe(deviceAccelerationSensor, "acceleration.active", motionHandler)
-    
-    // how many minutes to look in the past from the reminder time
-    state.minutesToCheckPriorToReminder = 60
-    
-    // Set a timer to run once a day to notify if draw wasn't opened yet
-    schedule(reminderTime, checkMotionInPast)
-}
-
-
-// If temp > 39 then send an app notification out.
-def tempHandler(evt){
-	if (evt.doubleValue > tempThreshold) {
-    	log.debug "Fridge temp of $evt.value exceeded threshold"
-   		sendNotification("WARNING: Fridge temp is $evt.value with threshold of $tempThreshold")
-	}
-}
-
-// Should turn off any LED notification once motion detected
-def motionHandler(evt){
-    // always call out to stop any possible LED notification
-	log.debug "Medication moved. Send stop LED notification"
-    resetLEDNotification()
-}
-
-// If no motion detected within 60 minutes of the timer send notification out.
-def checkMotionInPast(){
-	log.debug "Checking past 60 minutes of activity from $reminderTime"
-    
-    // check activity of sensor for past 60 minutes for any OPENED status
-    def movement = isMoved(state.minutesToCheckPriorToReminder)
-	log.debug "Motion found: $movement"
-    
-    // if there was movement, then do nothing and assume they took their meds
-    if (!movement) {    
-    	sendNotification("Hi, please remember to take your meds in the fridge")
-    
-        // if no movement, send out notification and set new reminder    
-        def reminderTimePlus10 = new Date(now() + (10 * 60000))
-
-        // needs to be scheduled if draw wasn't already opened
-        runOnce(reminderTimePlus10, checkMotionAfterReminder)
-    }
-}
-
-// If still no movement after 10 minutes past reminder, use LED notification
-def checkMotionAfterReminder(){
-	log.debug "Checking additional 10 minutes of activity from $reminderTime"
-    
-    // check activity of sensor for past 10 minutes for any OPENED status
-    def movement = isMoved(10)    
-    
-   	log.debug "Motion found: $movement"
-        
-    // if no open activity, blink lights
-    if (!movement) {
-    	log.debug "Notify LED API"
-        setLEDNotification()
-    }
-    
-}
-
-// Helper function for sending out an app notification
-def sendNotification(msg){
-        log.debug "Message Sent: $msg"
-        sendPush(msg)
-}
-
-// Check if the accelerometer has been activated since the minutes entered
-// Return true if active, else false.
-def isMoved(minutes){
-    // query last X minutes of activity log    
-    def previousDateTime = new Date(now() - (minutes * 60000))
-    
-    // capture all events recorded
-    def evts = deviceAccelerationSensor.eventsSince(previousDateTime)   
-    def motion = false
-    if (evts.size() > 0) {
-        evts.each{
-            if(it.value == "active") {
-                motion = true 
-            }
-        }
-	}
-    
-    return motion
-}
-
-// Saves current color and sets the light to RED
-def setLEDNotification(){
-
-	// turn light back off when reset is called if it was originally off
- 	state.ledState = deviceLight.currentValue("switch")
-
-	// set light to RED and store original color until stopped    
-    state.origColor = deviceLight.currentValue("hue")
-    deviceLight.on()
-    deviceLight.setHue(100)
-    
-    log.debug "LED set to RED. Original color stored: $state.origColor"
-
-}
-
-// Sets the color back to the original saved color
-def resetLEDNotification(){
-
-    // return color to original
-    log.debug "Reset LED color to: $state.origColor"
-    deviceLight.setHue(state.origColor)
-    
-    // if the light was turned on just for the notification, turn it back off now
-    if (state.ledState == "off") {
-    	deviceLight.off()
-    }
-}

smartapps/sheikhsphere/smart-humidifier.src/smart-humidifier.groovy

@@ -77,7 +77,7 @@ def humidityHandler(evt) {
 
 		} else {
          	if (state.lastStatus != "off") {
-                log.debug "Humidity Rose Above $humidityHigh1:  sending SMS and deactivating $mySwitch"
+                log.debug "Humidity Rose Above $humidityHigh1:  sending SMS to $phone1 and deactivating $mySwitch"
                 send("${humiditySensor1.label} sensed high humidity level of ${evt.value}, turning off ${switch1.label}")
                 switch1?.off()
                 state.lastStatus = "off"
@@ -99,7 +99,7 @@ def humidityHandler(evt) {
 
 		} else {
         	if (state.lastStatus != "on") {
-                log.debug "Humidity Dropped Below $humidityLow1:  sending SMS and activating $mySwitch"
+                log.debug "Humidity Dropped Below $humidityLow1:  sending SMS to $phone1 and activating $mySwitch"
                 send("${humiditySensor1.label} sensed low humidity level of ${evt.value}, turning on ${switch1.label}")
                 switch1?.on()
                 state.lastStatus = "on"
@@ -125,4 +125,4 @@ private send(msg) {
     }
 
     log.debug msg
-}
+}

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -39,7 +39,6 @@ preferences {
 	page(name: "completionPage")
 	page(name: "numbersPage")
 	page(name: "controllerExplanationPage")
-	page(name: "unsupportedDevicesPage")
 }
 
 def rootPage() {
@@ -48,9 +47,6 @@ def rootPage() {
 		section("What to dim") {
 			input(name: "dimmers", type: "capability.switchLevel", title: "Dimmers", description: null, multiple: true, required: true, submitOnChange: true)
 			if (dimmers) {
-				if (dimmersContainUnsupportedDevices()) {
-					href(name: "toUnsupportedDevicesPage", page: "unsupportedDevicesPage", title: "Some of your selected dimmers don't seem to be supported", description: "Tap here to fix it", required: true)
-				}
 				href(name: "toNumbersPage", page: "numbersPage", title: "Duration & Direction", description: numbersPageHrefDescription(), state: "complete")
 			}
 		}
@@ -75,31 +71,6 @@ def rootPage() {
 	}
 }
 
-def unsupportedDevicesPage() {
-
-	def unsupportedDimmers = dimmers.findAll { !hasSetLevelCommand(it) }
-
-	dynamicPage(name: "unsupportedDevicesPage") {
-		if (unsupportedDimmers) {
-			section("These devices do not support the setLevel command") {
-				unsupportedDimmers.each {
-					paragraph deviceLabel(it)
-				}
-			}
-			section {
-				input(name: "dimmers", type: "capability.sensor", title: "Please remove the above devices from this list.", submitOnChange: true, multiple: true)
-			}
-			section {
-				paragraph "If you think there is a mistake here, please contact support."
-			}
-		} else {
-			section {
-				paragraph "You're all set. You can hit the back button, now. Thanks for cleaning up your settings :)"
-			}
-		}
-	}
-}
-
 def controllerExplanationPage() {
 	dynamicPage(name: "controllerExplanationPage", title: "How To Control Gentle Wake Up") {
 
@@ -237,7 +208,7 @@ def completionPage() {
 		}
 
 		section("Notifications") {
-			input("recipients", "contact", title: "Send notifications to", required: false) {
+			input("recipients", "contact", title: "Send notifications to") {
 				input(name: "completionPhoneNumber", type: "phone", title: "Text This Number", description: "Phone number", required: false)
 				input(name: "completionPush", type: "bool", title: "Send A Push Notification", description: "Phone number", required: false)
 			}
@@ -557,16 +528,14 @@ def updateDimmers(percentComplete) {
 		} else {
 
 			def shouldChangeColors = (colorize && colorize != "false")
+			def canChangeColors = hasSetColorCommand(dimmer)
 
-			if (shouldChangeColors && hasSetColorCommand(dimmer)) {
+			log.debug "Setting ${deviceLabel(dimmer)} to ${nextLevel}"
-				def hue = getHue(dimmer, nextLevel)
+
-				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel} and hue to ${hue}"
+			if (shouldChangeColors && canChangeColors) {
-				dimmer.setColor([hue: hue, saturation: 100, level: nextLevel])
+				dimmer.setColor([hue: getHue(dimmer, nextLevel), saturation: 100, level: nextLevel])
-			} else if (hasSetLevelCommand(dimmer)) {
-				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel}"
-				dimmer.setLevel(nextLevel)
 			} else {
-				log.warn "${deviceLabel(dimmer)} does not have setColor or setLevel commands."
+				dimmer.setLevel(nextLevel)
 			}
 
 		}
@@ -720,7 +689,7 @@ def completionPercentage() {
 
 	def now = new Date().getTime()
 	def timeElapsed = now - atomicState.start
-	def totalRunTime = totalRunTimeMillis() ?: 1
+	def totalRunTime = totalRunTimeMillis()
 	def percentComplete = timeElapsed / totalRunTime * 100
 	log.debug "percentComplete: ${percentComplete}"
 
@@ -848,21 +817,24 @@ private getRedHue(level) {
 	if (level >= 96) return 17
 }
 
-private dimmersContainUnsupportedDevices() {
-	def found = dimmers.find { hasSetLevelCommand(it) == false }
-	return found != null
-}
-
 private hasSetLevelCommand(device) {
-	return hasCommand(device, "setLevel")
+	def isDimmer = false
+	device.supportedCommands.each {
+		if (it.name.contains("setLevel")) {
+			isDimmer = true
+		}
+	}
+	return isDimmer
 }
 
 private hasSetColorCommand(device) {
-	return hasCommand(device, "setColor")
+	def hasColor = false
-}
+	device.supportedCommands.each {
-
+		if (it.name.contains("setColor")) {
-private hasCommand(device, String command) {
+			hasColor = true
-	return (device.supportedCommands.find { it.name == command } != null)
+		}
+	}
+	return hasColor
 }
 
 private dimmersWithSetColorCommand() {
@@ -1101,4 +1073,4 @@ def hasStartLevel() {
 
 def hasEndLevel() {
 	return (endLevel != null && endLevel != "")
-}
+}

smartapps/smartthings/has-barkley-been-fed.src/has-barkley-been-fed.groovy

@@ -68,7 +68,7 @@ def scheduleCheck()
             sendNotificationToContacts("No one has fed the dog", recipients)
         }
         else {
-            log.debug "Feeder was not opened since $midnight, texting one phone number"
+            log.debug "Feeder was not opened since $midnight, texting $phone1"
             sendSms(phone1, "No one has fed the dog")
         }
 	}

smartapps/smartthings/its-too-cold.src/its-too-cold.groovy

@@ -69,10 +69,10 @@ def temperatureHandler(evt) {
 		def alreadySentSms = recentEvents.count { it.doubleValue <= tooCold } > 1
 
 		if (alreadySentSms) {
-			log.debug "SMS already sent within the last $deltaMinutes minutes"
+			log.debug "SMS already sent to $phone1 within the last $deltaMinutes minutes"
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
-			log.debug "Temperature dropped below $tooCold:  sending SMS and activating $mySwitch"
+			log.debug "Temperature dropped below $tooCold:  sending SMS to $phone1 and activating $mySwitch"
 			def tempScale = location.temperatureScale ?: "F"
 			send("${temperatureSensor1.displayName} is too cold, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
 			switch1?.on()

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -658,73 +658,29 @@ def updateDevice() {
 	def data = request.JSON
 	def command = data.command
 	def arguments = data.arguments
+
 	log.debug "updateDevice, params: ${params}, request: ${data}"
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
 		def device = allDevices.find { it.id == params.id }
-    if (device) {
+		if (device) {
-        if (validateCommand(device, command)) {
+        	if (device.hasCommand("$command")) {
-            if (arguments) {
+                if (arguments) {
-                device."$command"(*arguments)
+                    device."$command"(*arguments)
-            } else {
+                } else {
-                device."$command"()
+                    device."$command"()
-            }
+                }
-            render status: 204, data: "{}"
+                render status: 204, data: "{}"
-        } else {
+           	} else {
-          render status: 403, data: '{"msg": "Access denied. This command is not supported by current capability."}'
+				render status: 404, data: '{"msg": "Command not supported by this Device"}'
-        }
+			}
-    } else {
+		} else {
-      render status: 404, data: '{"msg": "Device not found"}'
+			render status: 404, data: '{"msg": "Device not found"}'
-    }
+		}
-  }
-}
-
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, command) {
-	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-	def currentDeviceCapability = getCapabilityName(device)
-	if (currentDeviceCapability != "" && capabilityCommands[currentDeviceCapability]) {
-    return (command in capabilityCommands[currentDeviceCapability] || (currentDeviceCapability == "Switch" && command == "setLevel" && device.hasCommand("setLevel"))) ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
 	}
 }
 
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(device) {
-    def capName = ""
-    if (switches.find{it.id == device.id})
-			capName = "Switch"
-		else if (alarms.find{it.id == device.id})
-			capName = "Alarm"
-		else if (locks.find{it.id == device.id})
-			capName = "Lock"
-    log.trace "Device: $device - Capability Name: $capName"
-		return capName
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
 def listSubscriptions() {
 	log.debug "listSubscriptions()"
 	app.subscriptions?.findAll { it.device?.device && it.device.id }?.collect {
@@ -823,33 +779,18 @@ def deviceHandler(evt) {
 }
 
 def sendToHarmony(evt, String callbackUrl) {
-  def callback = new URI(callbackUrl)
+	def callback = new URI(callbackUrl)
-  if (callback.port != -1) {
+	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
-  	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
+	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
-  	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
+	sendHubCommand(new physicalgraph.device.HubAction(
-  	sendHubCommand(new physicalgraph.device.HubAction(
+		method: "POST",
-  		method: "POST",
+		path: path,
-  		path: path,
+		headers: [
-  		headers: [
+			"Host": host,
-  			"Host": host,
+			"Content-Type": "application/json"
-  			"Content-Type": "application/json"
+		],
-  		],
+		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
-  		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
+	))
-  	))
-  } else {
-    def params = [
-      uri: callbackUrl,
-      body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
-    ]
-    try {
-        log.debug "Sending data to Harmony Cloud: $params"
-        httpPostJson(params) { resp ->
-            log.debug "Harmony Cloud - Response: ${resp.status}"
-        }
-    } catch (e) {
-        log.error "Harmony Cloud - Something went wrong: $e"
-    }
-  }
 }
 
 def listHubs() {

smartapps/vlaminck/alfred-workflow.src/alfred-workflow.groovy

@@ -92,89 +92,24 @@ void updateLock() {
 
 private void updateAll(devices) {
 	def command = request.JSON?.command
-	def type = params.param1
+	if (command) {
-	if (!devices) {
+		devices."$command"()
-		httpError(404, "Devices not found")
-	}
-	
-	if (command){
-		devices.each { device ->
-			executeCommand(device, type, command)
-		}
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
 	def command = request.JSON?.command
-	def type = params.param1
-	def device = devices?.find { it.id == params.id }
-
-	if (!device) {
-		httpError(404, "Device not found")
-	}
-
 	if (command) {
-		executeCommand(device, type, command)
+		def device = devices.find { it.id == params.id }
+		if (!device) {
+			httpError(404, "Device not found")
+		} else {
+			device."$command"()
+		}
 	}
 }
 
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, deviceType, command) {
-	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-	def currentDeviceCapability = getCapabilityName(deviceType)
-	if (capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
-	}
-}
-
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(type) {
-    switch(type) {
-		case "switches":
-			return "Switch"
-		case "locks":
-			return "Lock"
-		default:
-			return type
-	}
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
-/**
- * Validates and executes the command
- * on the device or devices
- */
-def executeCommand(device, type, command) {
-	if (validateCommand(device, type, command)) {
-		device."$command"()
-	} else {
-		httpError(403, "Access denied. This command is not supported by current capability.")
-	}	
-}
-
 private show(devices, name) {
 	def device = devices.find { it.id == params.id }
 	if (!device) {