Z-Wave Plus Window Shade DVCSMP-1803

Rolling down staging hotfix to master

devicetypes/smartthings/kudled-white-bulb.src/kudled-white-bulb.groovy

@@ -1,262 +0,0 @@
-/*
-    Osram Tunable White 60 A19 bulb
-
-    Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
-    that issue by using state variables
-*/
-
-//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
-
-metadata {
-    definition (name: "Kudled white bulb", namespace: "smartthings", author: "SmartThings") {
-
-        capability "Color Temperature"
-        capability "Actuator"
-        capability "Switch"
-        capability "Switch Level"
-        capability "Configuration"
-        capability "Refresh"
-        capability "Sensor"
-
-        attribute "colorName", "string"
-
-        // indicates that device keeps track of heartbeat (in state.heartbeat)
-        attribute "heartbeat", "string"
-        
-
-    }
-
-    // simulator metadata
-    simulator {
-        // status messages
-        status "on": "on/off: 1"
-        status "off": "on/off: 0"
-
-        // reply messages
-        reply "zcl on-off on": "on/off: 1"
-        reply "zcl on-off off": "on/off: 0"
-    }
-
-    // UI tile definitions
-    tiles {
-        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821"
-            state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff"
-        }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
-            state "colorTemperature", label: '${currentValue} K'
-        }
-        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat") {
-            state "colorName", label: '${currentValue}'
-        }
-
-
-        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-            state "level", action:"switch level.setLevel"
-        }
-        valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-            state "level", label: 'Level ${currentValue}%'
-        }
-
-
-        main(["switch"])
-        details(["switch", "refresh", "colorName", "levelSliderControl", "level", "colorTempSliderControl", "colorTemp"])
-    }
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    //log.trace description
-
-    // save heartbeat (i.e. last time we got a message from device)
-    state.heartbeat = Calendar.getInstance().getTimeInMillis()
-
-    if (description?.startsWith("catchall:")) {
-        if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
-        {
-            def result = createEvent(name: "switch", value: "on")
-            log.debug "Parse returned ${result?.descriptionText}"
-            return result
-        }
-        else if(description?.endsWith("0000") || description?.endsWith("1000") || description?.matches("on/off\\s*:\\s*0"))
-        {
-            def result = createEvent(name: "switch", value: "off")
-            log.debug "Parse returned ${result?.descriptionText}"
-            return result
-        }
-
-    }
-    else if (description?.startsWith("read attr -")) {
-        def descMap = parseDescriptionAsMap(description)
-        log.trace "descMap : $descMap"
-
-        if (descMap.cluster == "0300") {
-            log.debug descMap.value
-            def tempInMired = convertHexToInt(descMap.value)
-            def tempInKelvin = Math.round(1000000/tempInMired)
-            log.trace "temp in kelvin: $tempInKelvin"
-            sendEvent(name: "colorTemperature", value: tempInKelvin, displayed:false)
-        }
-        else if(descMap.cluster == "0008"){
-            def dimmerValue = Math.round(convertHexToInt(descMap.value) * 100 / 255)
-            log.debug "dimmer value is $dimmerValue"
-            sendEvent(name: "level", value: dimmerValue)
-        }
-    }
-    else {
-        def name = description?.startsWith("on/off: ") ? "switch" : null
-        def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-        def result = createEvent(name: name, value: value)
-        log.debug "Parse returned ${result?.descriptionText}"
-        return result
-    }
-}
-
-def on() {
-    log.debug "on()"
-    sendEvent(name: "switch", value: "on")
-    setLevel(state?.levelValue)
-}
-
-def off() {
-    log.debug "off()"
-    sendEvent(name: "switch", value: "off")
-    "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
-}
-
-def refresh() {
-    sendEvent(name: "heartbeat", value: "alive", displayed:false)
-    [
-            "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
-            "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
-            "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 7"
-    ]
-
-}
-
-def configure() {
-    state.levelValue = 100
-    log.debug "Configuring Reporting and Bindings."
-    def configCmds = [
-            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x0300 {${device.zigbeeId}} {}", "delay 500"
-    ]
-    return onOffConfig() + levelConfig() + configCmds + refresh() // send refresh cmds as part of config
-}
-
-def onOffConfig() {
-    [
-            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 6 {${device.zigbeeId}} {}", "delay 200",
-            "zcl global send-me-a-report 6 0 0x10 0 300 {01}",
-            "send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
-    ]
-}
-
-//level config for devices with min reporting interval as 5 seconds and reporting interval if no activity as 1hour (3600s)
-//min level change is 01
-def levelConfig() {
-    [
-            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 8 {${device.zigbeeId}} {}", "delay 200",
-            "zcl global send-me-a-report 8 0 0x20 5 3600 {01}",
-            "send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
-    ]
-}
-
-def setColorTemperature(value) {
-    if(value<101){
-        value = (value*38) + 2700		//Calculation of mapping 0-100 to 2700-6500
-    }
-
-    def tempInMired = Math.round(1000000/value)
-    def finalHex = swapEndianHex(hex(tempInMired, 4))
-    def genericName = getGenericName(value)
-    log.debug "generic name is : $genericName"
-
-    def cmds = []
-    sendEvent(name: "colorTemperature", value: value, displayed:false)
-    sendEvent(name: "colorName", value: genericName)
-
-    cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x0300 0x0a {${finalHex} 2000}"
-
-    cmds
-}
-
-def parseDescriptionAsMap(description) {
-    (description - "read attr - ").split(",").inject([:]) { map, param ->
-        def nameAndValue = param.split(":")
-        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-    }
-}
-
-def setLevel(value) {
-    state.levelValue = (value==null) ? 100 : value
-    log.trace "setLevel($value)"
-    def cmds = []
-
-    if (value == 0) {
-        sendEvent(name: "switch", value: "off")
-        cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
-    }
-    else if (device.latestValue("switch") == "off") {
-        sendEvent(name: "switch", value: "on")
-    }
-
-    sendEvent(name: "level", value: state.levelValue)
-    def level = hex(state.levelValue * 254 / 100)
-    cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
-
-    //log.debug cmds
-    cmds
-}
-
-//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
-private getGenericName(value){
-    def genericName = "White"
-    if(value < 3300){
-        genericName = "Soft White"
-    } else if(value < 4150){
-        genericName = "Moonlight"
-    } else if(value < 5000){
-        genericName = "Cool White"
-    } else if(value <= 6500){
-        genericName = "Daylight"
-    }
-
-    genericName
-}
-
-private getEndpointId() {
-    //new BigInteger(device.endpointId, 16).toString()
-    "0x0B"
-}
-
-private hex(value, width=2) {
-    def s = new BigInteger(Math.round(value).toString()).toString(16)
-    while (s.size() < width) {
-        s = "0" + s
-    }
-    s
-}
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private Integer convertHexToInt(hex) {
-    Integer.parseInt(hex,16)
-}
-
-//Need to reverse array of size 2
-private byte[] reverseArray(byte[] array) {
-    byte tmp;
-    tmp = array[1];
-    array[1] = array[0];
-    array[0] = tmp;
-    return array
-}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -403,39 +403,21 @@ def refresh() {
 
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		log.debug "Refreshing Values for manufacturer: SmartThings "
-		refreshCmds = refreshCmds + [
-			/* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
-				seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
-				Separating these out in a separate if-else because I do not want to touch Centralite part
-				as of now.
-			*/
-
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 0 0x20 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-		]
+		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
+            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
+            Separating these out in a separate if-else because I do not want to touch Centralite part
+            as of now.
+        */
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
 	} else {
-		refreshCmds = refreshCmds + [
-			/* sensitivity - default value (8) */
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 0 0x20 {02}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-		]
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
 	}
 
 	//Common refresh commands
-	refreshCmds = refreshCmds + [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global read 0xFC02 0x0010",
-		"send 0x${device.deviceNetworkId} 1 1","delay 400"
-	]
+	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
+			zigbee.readAttribute(0x0001, 0x0020) +
+			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
 
 	return refreshCmds + enrollResponse()
 }
@@ -443,38 +425,15 @@ def refresh() {
 def configure() {
 	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting"
 
-	def configCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-		]
+	def configCmds = enrollResponse() +
+			zigbee.batteryConfig() +
+			zigbee.temperatureConfig() +
+			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
 
 	return configCmds + refresh()
 }

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -21,6 +21,13 @@ metadata {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
+
+		fingerprint mfr: "011F", prod: "0001", model: "0001", deviceJoinName: "Schlage Motion Sensor"  // Schlage motion
+		fingerprint mfr: "014A", prod: "0001", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion
+		fingerprint mfr: "014A", prod: "0004", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion +
+		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
+		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
+		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
 	}
 
 	simulator {
@@ -125,9 +132,9 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	}
 	if (!state.lastbat || (new Date().time) - state.lastbat > 53*60*60*1000) {
 		result << response(zwave.batteryV1.batteryGet())
-		result << response("delay 1200")
+	} else {
+		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	}
-	result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	result
 }
 

devicetypes/smartthings/zwave-plus-window-shade.src/zwave-plus-window-shade.groovy

@@ -0,0 +1,244 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Z-Wave Plus Window Shade", namespace: "smartthings", author: "SmartThings") {
+		capability "Window Shade"
+		capability "Battery"
+		capability "Refresh"
+		capability "Health Check"
+		capability "Actuator"
+		capability "Sensor"
+
+		command "stop"
+
+		capability "Switch Level"   // until we get a Window Shade Level capability
+		capability "Switch"  // temporary for use with Routines
+
+		// This device handler is specifically for position-aware window coverings
+		//
+		fingerprint type: "0x1107", cc: "0x5E,0x26", deviceJoinName: "Window Shade"
+		fingerprint type: "0x9A00", cc: "0x5E,0x26", deviceJoinName: "Window Shade"
+		fingerprint mfr:"026E", prod:"4353", model:"5A31", deviceJoinName: "Window Blinds"
+		fingerprint mfr:"026E", prod:"5253", model:"5A31", deviceJoinName: "Roller Shade"
+	}
+
+	simulator {
+		status "open":  "command: 2603, payload: FF"
+		status "closed": "command: 2603, payload: 00"
+		status "10%": "command: 2603, payload: 0A"
+		status "66%": "command: 2603, payload: 42"
+		status "99%": "command: 2603, payload: 63"
+		status "battery 100%": "command: 8003, payload: 64"
+		status "battery low": "command: 8003, payload: FF"
+
+		// reply messages
+		reply "2001FF,delay 1000,2602": "command: 2603, payload: 10 FF FE"
+		reply "200100,delay 1000,2602": "command: 2603, payload: 60 00 FE"
+		reply "200142,delay 1000,2602": "command: 2603, payload: 10 42 FE"
+		reply "200163,delay 1000,2602": "command: 2603, payload: 10 63 FE"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"windowShade", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.windowShade", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'${name}', action:"close", icon:"st.doors.garage.garage-open", backgroundColor:"#79b821", nextState:"closing"
+				attributeState "closed", label:'${name}', action:"open", icon:"st.doors.garage.garage-closed", backgroundColor:"#ffffff", nextState:"opening"
+				attributeState "partiallyOpen", label:'Open', action:"close", icon:"st.doors.garage.garage-open", backgroundColor:"#79b821", nextState:"closing"
+				attributeState "opening", label:'${name}', action:"stop", icon:"st.doors.garage.garage-opening", backgroundColor:"#79b821", nextState:"partiallyOpen"
+				attributeState "closing", label:'${name}', action:"stop", icon:"st.doors.garage.garage-closing", backgroundColor:"#ffffff", nextState:"partiallyOpen"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"setLevel"
+			}
+		}
+
+		standardTile("refresh", "device.refresh", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh", nextState: "disabled"
+			state "disabled", label:'', action:"", icon:"st.secondary.refresh"
+		}
+
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		preferences {
+			input "preset", "number", title: "Default half-open position (1-100)", defaultValue: 50, required: false, displayDuringSetup: false
+		}
+
+		main(["windowShade"])
+		details(["windowShade", "refresh", "battery"])
+
+	}
+}
+
+def parse(String description) {
+	def result = null
+	//if (description =~ /command: 2603, payload: ([0-9A-Fa-f]{6})/)
+	// TODO: Workaround manual parsing of v4 multilevel report
+	def cmd = zwave.parse(description, [0x20: 1, 0x26: 3])  // TODO: switch to SwitchMultilevel v4 and use target value
+	if (cmd) {
+		result = zwaveEvent(cmd)
+	}
+	log.debug "Parsed '$description' to ${result.inspect()}"
+	return result
+}
+
+def getCheckInterval() {
+	// These are battery-powered devices, and it's not very critical
+	// to know whether they're online or not – 12 hrs
+	12 * 60 * 60
+}
+
+def installed() {
+	sendEvent(name: "checkInterval", value: checkInterval, displayed: false)
+}
+
+def updated() {
+	if (device.latestValue("checkInterval") != checkInterval) {
+		sendEvent(name: "checkInterval", value: checkInterval, displayed: false)
+	}
+	if (!device.latestState("battery")) {
+		response(zwave.batteryV1.batteryGet())
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	handleLevelReport(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	handleLevelReport(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelReport cmd) {
+	handleLevelReport(cmd)
+}
+
+private handleLevelReport(physicalgraph.zwave.Command cmd) {
+	def descriptionText = null
+	def shadeValue = null
+
+	def level = cmd.value as Integer
+	if (level >= 99) {
+		level = 99
+		shadeValue = "open"
+	} else if (level <= 0) {
+		level = 0  // unlike dimmer switches, the level isn't saved when closed
+		shadeValue = "closed"
+	} else {
+		shadeValue = "partiallyOpen"
+		descriptionText = "${device.displayName} shade is ${level}% open"
+	}
+	def levelEvent = createEvent(name: "level", value: level, unit: "%", displayed: false)
+	def stateEvent = createEvent(name: "windowShade", value: shadeValue, descriptionText: descriptionText, isStateChange: levelEvent.isStateChange)
+
+	def result = [stateEvent, levelEvent]
+	if (!state.lastbatt || now() - state.lastbatt > 24 * 60 * 60 * 1000) {
+		log.debug "requesting battery"
+		state.lastbatt = (now() - 23 * 60 * 60 * 1000) // don't queue up multiple battery reqs in a row
+		result << response(["delay 15000", zwave.batteryV1.batteryGet().format()])
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelStopLevelChange cmd) {
+	[ createEvent(name: "windowShade", value: "partiallyOpen", displayed: false, descriptionText: "$device.displayName shade stopped"),
+	  response(zwave.switchMultilevelV1.switchMultilevelGet().format()) ]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	updateDataValue("MSR", msr)
+	if (cmd.manufacturerName) {
+		updateDataValue("manufacturer", cmd.manufacturerName)
+	}
+	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	state.lastbatt = now()
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "unhandled $cmd"
+	return []
+}
+
+def open() {
+	log.debug "open()"
+	/*delayBetween([
+			zwave.basicV1.basicSet(value: 0xFF).format(),
+			zwave.switchMultilevelV1.switchMultilevelGet().format()
+	], 1000)*/
+	zwave.basicV1.basicSet(value: 0xFF).format()
+}
+
+def close() {
+	log.debug "close()"
+	/*delayBetween([
+			zwave.basicV1.basicSet(value: 0x00).format(),
+			zwave.switchMultilevelV1.switchMultilevelGet().format()
+	], 1000)*/
+	zwave.basicV1.basicSet(value: 0).format()
+}
+
+def on() {
+	open()
+}
+
+def off() {
+	close()
+}
+
+def setLevel(value, duration = null) {
+	log.debug "setLevel(${value.inspect()})"
+	Integer level = value as Integer
+	if (level < 0) level = 0
+	if (level > 99) level = 99
+	if (!preset && level > 0 && level < 95) state.preset = level
+	delayBetween([
+			zwave.basicV1.basicSet(value: level).format(),
+			zwave.switchMultilevelV1.switchMultilevelGet().format()
+	])
+}
+
+def presetPosition() {
+	setLevel(preset ?: state.preset ?: 50)
+}
+
+def stop() {
+	log.debug "stop()"
+	zwave.switchMultilevelV3.switchMultilevelStopLevelChange().format()
+}
+
+def ping() {
+	zwave.switchMultilevelV1.switchMultilevelGet().format()
+}
+
+def refresh() {
+	log.debug "refresh()"
+	delayBetween([
+			zwave.switchMultilevelV1.switchMultilevelGet().format(),
+			zwave.batteryV1.batteryGet().format()
+	], 1500)
+}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -30,6 +30,7 @@ definition(
 preferences {
 	page(name:"mainPage", title:"Hue Device Setup", content:"mainPage", refreshTimeout:5)
 	page(name:"bridgeDiscovery", title:"Hue Bridge Discovery", content:"bridgeDiscovery", refreshTimeout:5)
+	page(name:"bridgeDiscoveryFailed", title:"Bridge Discovery Failed", content:"bridgeDiscoveryFailed", refreshTimeout:0)
 	page(name:"bridgeBtnPush", title:"Linking with your Hue", content:"bridgeLinking", refreshTimeout:5)
 	page(name:"bulbDiscovery", title:"Hue Device Setup", content:"bulbDiscovery", refreshTimeout:5)
 }
@@ -53,12 +54,21 @@ def bridgeDiscovery(params=[:])
 	def options = bridges ?: []
 	def numFound = options.size() ?: 0
 
-	if (numFound == 0 && state.bridgeRefreshCount > 25) {
-    	log.trace "Cleaning old bridges memory"
-    	state.bridges = [:]
-        state.bridgeRefreshCount = 0
-        app.updateSetting("selectedHue", "")
-    }
+	if (numFound == 0) {
+		if (state.bridgeRefreshCount == 25) {
+			log.trace "Cleaning old bridges memory"
+			state.bridges = [:]
+			app.updateSetting("selectedHue", "")
+		} else if (state.bridgeRefreshCount > 100) {
+			// five minutes have passed, give up
+			// there seems to be a problem going back from discovey failed page in some instances (compared to pressing next)
+			// however it is probably a SmartThings settings issue
+			state.bridges = [:]
+			app.updateSetting("selectedHue", "")
+			state.bridgeRefreshCount = 0
+			return bridgeDiscoveryFailed()
+		}
+	}
 
 	ssdpSubscribe()
 
@@ -79,6 +89,13 @@ def bridgeDiscovery(params=[:])
 	}
 }
 
+def bridgeDiscoveryFailed() {
+	return dynamicPage(name:"bridgeDiscoveryFailed", title: "Bridge Discovery Failed", nextPage: "bridgeDiscovery") {
+		section("Failed to discover any Hue Bridges. Please confirm that the Hue Bridge is connected to the same network as your SmartThings Hub, and that it has power.") {
+		}
+	}
+}
+
 def bridgeLinking()
 {
 	int linkRefreshcount = !state.linkRefreshcount ? 0 : state.linkRefreshcount as int
@@ -88,19 +105,15 @@ def bridgeLinking()
 	def nextPage = ""
 	def title = "Linking with your Hue"
     def paragraphText
-    def hueimage = null
 	if (selectedHue) {
 		paragraphText = "Press the button on your Hue Bridge to setup a link. "
-        hueimage = "http://huedisco.mediavibe.nl/wp-content/uploads/2013/09/pair-bridge.png"
     } else {
     	paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
-        hueimage = null
     }
 	if (state.username) { //if discovery worked
 		nextPage = "bulbDiscovery"
 		title = "Success!"
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
-        hueimage = null
 	}
 
 	if((linkRefreshcount % 2) == 0 && !state.username) {
@@ -110,8 +123,6 @@ def bridgeLinking()
 	return dynamicPage(name:"bridgeBtnPush", title:title, nextPage:nextPage, refreshInterval:refreshInterval) {
 		section("") {
 			paragraph """${paragraphText}"""
-            if (hueimage != null)
-            	image "${hueimage}"
 		}
 	}
 }
@@ -135,13 +146,14 @@ def bulbDiscovery() {
 	if((bulbRefreshCount % 5) == 0) {
 		discoverHueBulbs()
 	}
+	def selectedBridge = state.bridges.find { key, value -> value?.serialNumber?.equalsIgnoreCase(selectedHue) }
+	def title = selectedBridge?.value?.name ?: "Find bridges"
 
 	return dynamicPage(name:"bulbDiscovery", title:"Bulb Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 		section("Please wait while we discover your Hue Bulbs. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:bulboptions
 		}
 		section {
-			def title = getBridgeIP() ? "Hue bridge (${getBridgeIP()})" : "Find bridges"
 			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
 
 		}
@@ -348,18 +360,19 @@ def addBulbs() {
 			def newHueBulb
 			if (bulbs instanceof java.util.Map) {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
-                if (newHueBulb != null) {
-                    d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
+
+				if (newHueBulb != null) {
+					d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
 					if (d) {
 						log.debug "created ${d.displayName} with id $dni"
 						d.completedSetup = true
 						d.refresh()
 					}
-                } else {
-                	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
-                }
+				} else {
+					log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
+				}
 			} else {
-            	//backwards compatable
+			 	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
 				d?.completedSetup = true
@@ -369,7 +382,7 @@ def addBulbs() {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
 			if (bulbs instanceof java.util.Map) {
 				// Update device type if incorrect
-            	def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
+				def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
 				upgradeDeviceType(d, newHueBulb?.value?.type)
 			}
 		}
@@ -489,7 +502,21 @@ void bridgeDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
 		def bridges = getHueBridges()
 		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
 		if (bridge) {
-			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
+			// serialNumber from API is in format of 0017882413ad (mac address), however on the actual bridge only last six
+			// characters are printed on the back so using that to identify bridge
+			def idNumber = body?.device?.serialNumber?.text()
+			if (idNumber?.size() >= 6)
+				idNumber = idNumber[-6..-1].toUpperCase()
+
+			// usually in form of bridge name followed by (ip), i.e. defaults to Philips Hue (192.168.1.2)
+			// replace IP with serial number to make it easier for user to identify
+			def name = body?.device?.friendlyName?.text()
+			def index = name?.indexOf('(')
+			if (index != -1) {
+				name = name.substring(0,index)
+				name += " ($idNumber)"
+			}
+			bridge.value << [name:name, serialNumber:body?.device?.serialNumber?.text(), verified: true]
 		} else {
 			log.error "/description.xml returned a bridge that didn't exist"
 		}