MSA-1476: Centralite HA thermostat. Works perfectly, able to see temperature, control it, fan, heat, on and off,hold. I didnt make this code, i want this to be published for everybody who has twc or comcast intelligent home. They use this type of device and you can convert them to smartthings.

Rolling down staging hotfix to master

build.gradle

@@ -19,7 +19,7 @@ buildscript {
                 username smartThingsArtifactoryUserName
                 password smartThingsArtifactoryPassword
             }
-            url "http://artifactory.smartthings.com/libs-release-local"
+            url "https://artifactory.smartthings.com/libs-release-local"
         }
     }
 }
@@ -27,9 +27,37 @@ buildscript {
 repositories {
     mavenLocal()
     jcenter()
+    maven {
+        credentials {
+            username smartThingsArtifactoryUserName
+            password smartThingsArtifactoryPassword
+        }
+        url "https://artifactory.smartthings.com/libs-release-local"
+    }
+}
+
+sourceSets {
+    devicetypes {
+        groovy {
+            srcDirs = ['devicetypes']
+        }
+    }
+    smartapps {
+        groovy {
+            srcDirs = ['smartapps']
+        }
+    }
 }
 
 dependencies {
+    devicetypesCompile 'org.codehaus.groovy:groovy-all:2.4.7'
+    devicetypesCompile 'smartthings:appengine-z-wave:0.1.2'
+    devicetypesCompile 'smartthings:appengine-zigbee:0.1.11'
+    smartappsCompile 'org.codehaus.groovy:groovy-all:2.4.7'
+    smartappsCompile 'smartthings:appengine-common:0.1.8'
+    smartappsCompile 'org.codehaus.groovy.modules.http-builder:http-builder:0.7.1'
+    smartappsCompile 'org.grails:grails-web:2.3.11'
+    smartappsCompile 'org.json:json:20140107'
 }
 
 slackSendMessage {

circle.yml

@@ -5,7 +5,9 @@ machine:
 
 dependencies:
   override:
-    - echo "Nothing to do."
+    - ./gradlew dependencies -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD"
+  post:
+    - ./gradlew compileSmartappsGroovy compileDevicetypesGroovy -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD"
 
 test:
   override:

devicetypes/dianoga/netatmo-additional-module.src/netatmo-additional-module.groovy

@@ -15,6 +15,7 @@
  */
 metadata {
 	definition (name: "Netatmo Additional Module", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 

devicetypes/dianoga/netatmo-basestation.src/netatmo-basestation.groovy

@@ -15,6 +15,7 @@
  */
 metadata {
 	definition (name: "Netatmo Basestation", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 

devicetypes/dianoga/netatmo-outdoor-module.src/netatmo-outdoor-module.groovy

@@ -15,6 +15,7 @@
  */
 metadata {
 	definition (name: "Netatmo Outdoor Module", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 	}

devicetypes/dianoga/netatmo-rain.src/netatmo-rain.groovy

@@ -15,6 +15,8 @@
  */
 metadata {
 	definition (name: "Netatmo Rain", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
+	
 		attribute "rain", "number"
         attribute "rainSumHour", "number"
         attribute "rainSumDay", "number"

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -33,8 +33,8 @@ metadata {
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGMS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.motion", key:"PRIMARY_CONTROL") {
-            	attributeState("inactive", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
-            	attributeState("active", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")   
+            	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
+            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")   
             }
             
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
@@ -278,4 +278,4 @@ private encap(physicalgraph.zwave.Command cmd) {
     } else {
     	crc16(cmd)
     }
-}
+}

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -67,6 +67,6 @@ def refresh() {
 
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-	parent.pollChild()
+	parent.poll()
 
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -133,7 +133,7 @@ def refresh() {
 
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-	parent.pollChild()
+	parent.poll()
 }
 
 def generateEvent(Map results) {

devicetypes/smartthings/zigbee-centralite-thermostat.src/zigbee-centralite-thermostat.groovy

@@ -0,0 +1,630 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	Author: SmartThings
+ *	Date: 2013-12-02
+ */
+metadata {
+	definition (name: "ZigBee CentraLite Thermostat", namespace: "smartthings", author: "SmartThings") {
+		capability "Actuator"
+		capability "Temperature Measurement"
+		capability "Thermostat"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Sensor"
+		capability "Polling"
+		capability "Battery"
+		
+
+		// Custom commands 
+        command "raiseHeatLevel"
+		command "lowHeatLevel"
+		command "raiseCoolLevel"
+		command "lowCoolLevel"
+		command "setTemperature"
+		command "setThermostatHoldMode"
+		command "getPowerSource"
+
+		attribute "temperatureScale", "string"
+		attribute "thermostatHoldMode", "string"
+		attribute "powerSource", "string"
+		
+		fingerprint profileId: "0104", inClusters: "0000,0001,0003,0020,0201,0202,0204,0B05", outClusters: "000A, 0019"
+	}
+
+	// simulator metadata
+	simulator { }
+
+	tiles(scale: 2) {
+	
+        multiAttributeTile(name:"summary", type: "thermostat", width: 6, height: 4) {
+        	tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("temperature", label:'${currentValue}°', unit:"dF",
+				backgroundColors:[
+                		// Celsius Color Range
+						[value: 0, color: "#153591"],
+						[value: 7, color: "#1e9cbb"],
+						[value: 15, color: "#90d2a7"],
+						[value: 23, color: "#44b621"],
+						[value: 29, color: "#f1d801"],
+                    	[value: 33, color: "#d04e00"],
+						[value: 36, color: "#bc2323"],
+						// Fahrenheit Color Range
+						[value: 40, color: "#153591"],
+						[value: 44, color: "#1e9cbb"],
+						[value: 59, color: "#90d2a7"],
+                        [value: 65, color: "#99ff33"],
+						[value: 74, color: "#44b621"],
+						[value: 84, color: "#f1d801"],
+						[value: 92, color: "#d04e00"],
+						[value: 96, color: "#bc2323"]
+					])
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+                attributeState("default", action: "setTemperature")
+			}
+            
+			tileAttribute("device.powerSource", key: "SECONDARY_CONTROL") {
+				attributeState("default", label:'PowerSrc: ${currentValue}')
+			}            
+			
+            tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+            	attributeState("default", label:'${currentValue}', unit:"dF")
+            }
+			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+ 		}
+		
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}°', unit:"",
+				backgroundColors:[
+                		// Celsius Color Range
+						[value: 0, color: "#153591"],
+						[value: 7, color: "#1e9cbb"],
+						[value: 15, color: "#90d2a7"],
+						[value: 23, color: "#44b621"],
+						[value: 29, color: "#f1d801"],
+                    	[value: 33, color: "#d04e00"],
+						[value: 36, color: "#bc2323"],
+						// Fahrenheit Color Range
+						[value: 40, color: "#153591"],
+						[value: 44, color: "#1e9cbb"],
+						[value: 59, color: "#90d2a7"],
+                        [value: 65, color: "#99ff33"],
+						[value: 74, color: "#44b621"],
+						[value: 84, color: "#f1d801"],
+						[value: 92, color: "#d04e00"],
+						[value: 96, color: "#bc2323"]
+				]
+			)
+		}
+
+		standardTile("mode", "device.thermostatMode", height: 2, width: 2, inactiveLabel: false, canChangeIcon: false) {
+			state "off", label:'', action:"thermostat.setThermostatMode", icon: "st.thermostat.heating-cooling-off"
+			state "cool", label:'', action:"thermostat.setThermostatMode", icon: "st.thermostat.cool", backgroundColor: '#99ddff'
+			state "heat", label:'', action:"thermostat.setThermostatMode", icon: "st.thermostat.heat", backgroundColor: '#fd631c'
+			state "emergencyHeat", label:'', action:"thermostat.setThermostatMode", icon: "st.thermostat.emergency-heat", backgroundColor: '#E11102'
+			//state "auto", label:'', action:"thermostat.setThermostatMode", icon: "st.thermostat.auto", backgroundColor: '#ffff00'
+		}
+		
+		standardTile("fanMode", "device.thermostatFanMode", height: 2, width: 2, inactiveLabel: false, canChangeIcon: false) {
+			state "fanAuto", label:'', action:"thermostat.setThermostatFanMode", icon: "st.thermostat.fan-auto", backgroundColor: '#ffff00'
+			state "fanOn", label:'', action:"thermostat.setThermostatFanMode", icon: "st.thermostat.fan-on", backgroundColor: '#ffff00'
+		}
+
+		standardTile("holdMode", "device.thermostatHoldMode", height: 2, width: 2, inactiveLabel: false, canChangeIcon: false) {
+			state "holdOff", label:'Hold Off', action:"setThermostatHoldMode", icon: "st.Lighting.light13", backgroundColor:"#ffffff", nextState:"holdOff"
+			state "holdOn", label:'Hold On', action:"setThermostatHoldMode", icon: "st.Lighting.light11", backgroundColor:"#ffb3ff", nextState:"holdOn"
+		}
+		
+        standardTile("raiseHeatLevel", "device.heatingSetpoint", canChangeIcon: false, , height: 0.5, width: 0.5, inactiveLabel: false, decoration: "flat") {
+            state "raiseHeatLevel", label:'  ', action:"raiseHeatLevel", icon:"st.thermostat.thermostat-up"
+        }
+		valueTile("heatingSetpoint", "device.heatingSetpoint", height: 1, width: 2, inactiveLabel: false, decoration: "flat") {
+			state "heat", label:'${currentValue}° Heat', unit:"", backgroundColor:"#fd631c"
+		}
+        standardTile("lowHeatLevel", "device.heatingSetpoint", canChangeIcon: false, , height: 0.5, width: 0.5, inactiveLabel: false, decoration: "flat") {
+            state "lowHeatLevel", label:'  ', action:"lowHeatLevel", icon:"st.thermostat.thermostat-down"
+        }
+		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 4, inactiveLabel: false) {
+			state "setHeatingSetpoint", action:"thermostat.setHeatingSetpoint", backgroundColor:"#d04e00"
+		}
+
+        standardTile("raiseCoolLevel", "device.heatingSetpoint", canChangeIcon: false, , height: 0.5, width: 0.5, inactiveLabel: false, decoration: "flat") {
+            state "raiseCoolLevel", label:'  ', action:"raiseCoolLevel", icon:"st.thermostat.thermostat-up"
+        }
+ 		valueTile("coolingSetpoint", "device.coolingSetpoint", , height: 1, width: 2, inactiveLabel: false, decoration: "flat") {
+			state "cool", label:'${currentValue}° Cool', unit:"", backgroundColor:"#66ccff"
+		}
+        standardTile("lowCoolLevel", "device.heatingSetpoint", canChangeIcon: false, , height: 0.5, width: 0.5, inactiveLabel: false, decoration: "flat") {
+            state "lowCoolLevel", label:'  ', action:"lowCoolLevel", icon:"st.thermostat.thermostat-down"
+        }
+		controlTile("coolSliderControl", "device.coolingSetpoint", "slider", height: 1, width: 4, inactiveLabel: false) {
+			state "setCoolingSetpoint", action:"thermostat.setCoolingSetpoint", backgroundColor: "#003CEC"
+		}
+
+		standardTile("refresh", "device.temperature", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		standardTile("configure", "device.configure", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% Battery', unit:""
+		}
+		main(["temperature", "summary"])
+		details(["summary", "holdMode", "mode", "fanMode", "heatSliderControl", "heatingSetpoint", "coolSliderControl",  "coolingSetpoint", "battery", "refresh"])
+	}
+}
+
+
+def setTemperature(setpoint) {
+	log.debug "setTemperature() called with setpoint ${setpoint}. "
+ 	log.debug "Current temperature: ${device.currentValue("temperature")}. Heat Setpoint: ${device.currentValue("heatingSetpoint")}. Cool Setpoint: ${device.currentValue("coolingSetpoint")}"
+   
+    def mode = device.currentValue("thermostatMode")
+    def midpoint
+	def targetvalue
+
+	if (mode == "off") {
+		log.warn "setTemperature(): this mode: $mode does not allow raiseSetpoint"
+        return
+    } 
+    
+    def currentTemp = device.currentValue("temperature")
+    def deltaTemp = setpoint - currentTemp
+    
+    log.debug "deltaTemp = ${deltaTemp}"
+    
+    if (mode == "heat") {
+    	// Change the heat
+        log.debug "setTemperature(): change the heat temp"
+		 if (deltaTemp < 0) {
+			lowHeatLevel()
+        } else if (deltaTemp > 0) {
+			raiseHeatLevel()
+		}
+    } else if (mode == "cool") {
+    	// Change the cool
+        log.debug "setTemperature(): change the cool temp"
+		 if (deltaTemp < 0) {
+			lowCoolLevel()
+        } else if (deltaTemp > 0) {
+			raiseCoolLevel()
+		}
+    }
+}
+
+
+def raiseHeatLevel(){
+
+    def mode = device.currentValue("thermostatMode")
+
+ 	if (mode == "off") {
+		log.warn "raiseHeatLevel(): this mode: $mode does not allow raiseHeatLevel"
+	} else {
+		def locationScale = getTemperatureScale()
+		def maxTemp
+		def minTemp
+		if (locationScale == "C") {
+			maxTemp = 44 // Max Temp in C
+			minTemp = 7 // Min Temp in C
+			log.trace "Location is in Celsius, MaxTemp: $maxTemp, MinTemp: $minTemp"
+		} else {
+			maxTemp = 86 // Max temp in F
+			minTemp = 30 // Max temp in F
+			log.trace "Location is in Farenheit, MaxTemp: $maxTemp, MinTemp: $minTemp"
+		}
+		
+		def currentLevel = device.currentValue("heatingSetpoint")
+		int nextLevel = currentLevel.toInteger() + 1
+    
+		if( nextLevel > maxTemp){
+			nextLevel = maxTemp
+		}
+		log.debug "Setting heat set point up to: ${nextLevel}"
+		setHeatingSetpoint(nextLevel)
+	}
+}
+
+def lowHeatLevel(){
+ 	if (mode == "off") {
+		log.warn "lowHeatLevel(): this mode: $mode does not allow lowHeatLevel"
+	} else {
+		def locationScale = getTemperatureScale()
+		def maxTemp
+		def minTemp
+		if (locationScale == "C") {
+			maxTemp = 44 // Max Temp in C
+			minTemp = 7 // Min Temp in C
+			log.trace "Location is in Celsius, MaxTemp: $maxTemp, MinTemp: $minTemp"
+		} else {
+			maxTemp = 86 // Max temp in F
+			minTemp = 30 // Max temp in F
+			log.trace "Location is in Farenheit, MaxTemp: $maxTemp, MinTemp: $minTemp"
+		}
+
+		def currentLevel = device.currentValue("heatingSetpoint")
+		int nextLevel = currentLevel.toInteger() - 1
+    
+		if( nextLevel < minTemp){
+			nextLevel = minTemp
+		}
+		log.debug "Setting heat set point down to: ${nextLevel}"
+		setHeatingSetpoint(nextLevel)
+	}
+}
+
+def raiseCoolLevel(){
+ 	if (mode == "off") {
+		log.warn "raiseCoolLevel(): this mode: $mode does not allow raiseCoolLevel"
+	} else {
+		def locationScale = getTemperatureScale()
+		def maxTemp
+		def minTemp
+		if (locationScale == "C") {
+			maxTemp = 44 // Max Temp in C
+			minTemp = 7 // Min Temp in C
+			log.trace "Location is in Celsius, MaxTemp: $maxTemp, MinTemp: $minTemp"
+		} else {
+			maxTemp = 86 // Max temp in F
+			minTemp = 30 // Max temp in F
+			log.trace "Location is in Farenheit, MaxTemp: $maxTemp, MinTemp: $minTemp"
+		}
+
+		def currentLevel = device.currentValue("coolingSetpoint")
+		int nextLevel = currentLevel.toInteger() + 1
+   
+		if( nextLevel > maxTemp){
+			nextLevel = maxTemp
+		}
+		log.debug "Setting cool set point up to: ${nextLevel}"
+		setCoolingSetpoint(nextLevel)
+	}
+}
+
+def lowCoolLevel(){
+ 	if (mode == "off") {
+		log.warn "lowCoolLevel(): this mode: $mode does not allow lowCoolLevel"
+	} else {
+		def locationScale = getTemperatureScale()
+		def maxTemp
+		def minTemp
+		if (locationScale == "C") {
+			maxTemp = 44 // Max Temp in C
+			minTemp = 7 // Min Temp in C
+			log.trace "Location is in Celsius, MaxTemp: $maxTemp, MinTemp: $minTemp"
+		} else {
+			maxTemp = 86 // Max temp in F
+			minTemp = 30 // Max temp in F
+			log.trace "Location is in Farenheit, MaxTemp: $maxTemp, MinTemp: $minTemp"
+		}
+
+		def currentLevel = device.currentValue("coolingSetpoint")
+		int nextLevel = currentLevel.toInteger() - 1
+    
+		if( nextLevel < minTemp){
+			nextLevel = minTemp
+		}
+		log.debug "Setting cool set point down to: ${nextLevel}"
+		setCoolingSetpoint(nextLevel)
+	}
+}
+
+
+
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parse description $description"
+	def map = [:]
+	if (description?.startsWith("read attr -")) {
+		def descMap = parseDescriptionAsMap(description)
+		log.debug "Desc Map: $descMap"
+		if (descMap.cluster == "0201" && descMap.attrId == "0000") {
+			log.debug "TEMP"
+			map.name = "temperature"
+			map.value = getTemperature(descMap.value)
+		} else if (descMap.cluster == "0201" && descMap.attrId == "0011") {
+			log.debug "COOLING SETPOINT"
+			map.name = "coolingSetpoint"
+			map.value = getTemperature(descMap.value)
+		} else if (descMap.cluster == "0201" && descMap.attrId == "0012") {
+			log.debug "HEATING SETPOINT"
+			map.name = "heatingSetpoint"
+			map.value = getTemperature(descMap.value)
+		} else if (descMap.cluster == "0201" && descMap.attrId == "001c") {
+			log.debug "MODE"
+			map.name = "thermostatMode"
+			map.value = getModeMap()[descMap.value]
+		} else if (descMap.cluster == "0202" && descMap.attrId == "0000") {
+			log.debug "FAN MODE"
+			map.name = "thermostatFanMode"
+			map.value = getFanModeMap()[descMap.value]
+		} else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		    log.debug "BATTERY"
+			map.name = "battery"
+			map.value = getBatteryLevel(descMap.value)
+		} else if (descMap.cluster == "0201" && descMap.attrId == "001e") {
+		    log.debug "RUN MODE"
+			map.name = "thermostatRunMode"
+			//map.value = getRunModeMap()[descMap.value]
+			map.value = getThermostatRunMode(descMap.value)
+		} else if (descMap.cluster == "0201" && descMap.attrId == "0023") {
+		    log.debug "HOLD MODE"
+			map.name = "thermostatHoldMode"
+			map.value = getHoldModeMap()[descMap.value]			
+		} else if (descMap.cluster == "0000" && descMap.attrId == "0007") {
+		    log.debug "Power Source"
+			map.name = "powerSource"
+			map.value = getPowerSource()[descMap.value]			
+		}
+	}
+
+	def result = null
+	if (map) {
+		result = createEvent(map)
+	}
+	log.debug "Parse returned $map"
+	return result
+}
+
+def parseDescriptionAsMap(description) {
+	(description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+}
+
+def getModeMap() { [
+	"00":"off",
+    //"01":"auto",
+	"03":"cool",
+	"04":"heat",
+	"05":"emergencyHeat"
+]}
+
+def getHoldModeMap() { [
+	"00":"holdOff",
+	"01":"holdOn",
+]}
+
+def getPowerSource() { [
+	"01":"24VAC",
+	"03":"Battery",
+]}
+
+
+def getFanModeMap() { [
+	"04":"fanOn",
+	"05":"fanAuto"
+]}
+
+
+def getThermostatRunMode(value) {
+	if (value != null) {
+	    def RunModeValue = Integer.parseInt(value, 16)
+		log.debug "Thermostat RunMode: ${RunModeValue} "
+	}
+}
+
+
+def getTemperature(value) {
+	if (value != null) {
+		def celsius = Integer.parseInt(value, 16) / 100
+		if (getTemperatureScale() == "C") {
+			return celsius
+		} else {
+			return Math.round(celsiusToFahrenheit(celsius))			
+		}
+	}
+}
+
+def setHeatingSetpoint(degrees) {
+	if (degrees != null) {
+		def temperatureScale = getTemperatureScale()
+
+		def degreesInteger = Math.round(degrees)
+		log.debug "setHeatingSetpoint({$degreesInteger} ${temperatureScale})"
+		sendEvent("name": "heatingSetpoint", "value": degreesInteger)
+
+		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
+		"st wattr 0x${device.deviceNetworkId} 1 0x201 0x12 0x29 {" + hex(celsius * 100) + "}"
+	}
+}
+
+def setCoolingSetpoint(degrees) {
+	if (degrees != null) {
+		def degreesInteger = Math.round(degrees)
+		log.debug "setCoolingSetpoint({$degreesInteger} ${temperatureScale})"
+		sendEvent("name": "coolingSetpoint", "value": degreesInteger)
+		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
+		"st wattr 0x${device.deviceNetworkId} 1 0x201 0x11 0x29 {" + hex(celsius * 100) + "}"
+	}
+}
+
+def modes() {
+	["off", "cool", "heat", "emergencyHeat"]
+}
+
+def setThermostatMode() {
+	log.debug "switching thermostatMode"
+	def currentMode = device.currentState("thermostatMode")?.value
+	def modeOrder = modes()
+    log.debug "modeOrder: ${modeOrder}"
+	def index = modeOrder.indexOf(currentMode)
+    log.debug "index: ${index}"
+    def next = index >= 0 && index < modeOrder.size() - 1 ? modeOrder[index + 1] : modeOrder[0]
+	log.debug "switching mode from $currentMode to $next"
+	"$next"()
+}
+
+def setThermostatFanMode() {
+	log.debug "Switching fan mode"
+	def currentFanMode = device.currentState("thermostatFanMode")?.value
+	log.debug "switching fan from current mode: $currentFanMode"
+	def returnCommand
+
+	switch (currentFanMode) {
+		case "fanAuto":
+			returnCommand = fanOn()
+			break
+		case "fanOn":
+			returnCommand = fanAuto()
+			break
+	}
+	if(!currentFanMode) { returnCommand = fanAuto() }
+	returnCommand
+}
+
+
+def setThermostatHoldMode() {
+	log.debug "Switching Hold mode"
+	def currentHoldMode = device.currentState("thermostatHoldMode")?.value
+	log.debug "switching thermostat from current mode: $currentHoldMode"
+	def returnCommand
+
+	switch (currentHoldMode) {
+		case "holdOff":
+			returnCommand = holdOn()
+			break
+		case "holdOn":
+			returnCommand = holdOff()
+			break
+	}
+	if(!currentHoldMode) { returnCommand = holdOff() }
+	returnCommand
+}
+
+def setThermostatMode(String value) {
+	log.debug "setThermostatMode({$value})"
+	"$value"()
+}
+
+def setThermostatFanMode(String value) {
+	log.debug "setThermostatFanMode({$value})"
+	"$value"()
+}
+
+def setThermostatHoldMode(String value) {
+	log.debug "setThermostatHoldMode({$value})"
+	"$value"()
+}
+
+
+def off() {
+	log.debug "off"
+	sendEvent("name":"thermostatMode", "value":"off")
+	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x1C 0x30 {00}"
+}
+
+def cool() {
+	log.debug "cool"
+	sendEvent("name":"thermostatMode", "value":"cool")
+	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x1C 0x30 {03}"
+}
+
+def heat() {
+	log.debug "heat"
+	sendEvent("name":"thermostatMode", "value":"heat")
+	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x1C 0x30 {04}"
+}
+
+def emergencyHeat() {
+	log.debug "emergencyHeat"
+	sendEvent("name":"thermostatMode", "value":"emergencyHeat")
+	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x1C 0x30 {05}"
+}
+
+def on() {
+	fanOn()
+}
+
+def fanOn() {
+	log.debug "fanOn"
+	sendEvent("name":"thermostatFanMode", "value":"fanOn")
+	"st wattr 0x${device.deviceNetworkId} 1 0x202 0 0x30 {04}"
+}
+
+def auto() {
+	fanAuto()
+}
+
+def fanAuto() {
+	log.debug "fanAuto"
+	sendEvent("name":"thermostatFanMode", "value":"fanAuto")
+	"st wattr 0x${device.deviceNetworkId} 1 0x202 0 0x30 {05}"
+}
+
+def holdOn() {
+	log.debug "Set Hold On for thermostat"
+	sendEvent("name":"thermostatHoldMode", "value":"holdOn")
+	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x23 0x30 {01}"
+}
+
+def holdOff() {
+	log.debug "Set Hold Off for thermostat"
+	sendEvent("name":"thermostatHoldMode", "value":"holdOff")
+	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x23 0x30 {00}"
+}
+
+// Commment out below if no C-wire since it will kill the batteries.
+def poll() {
+//	log.debug "Executing 'poll'"
+	refresh()
+}
+
+
+def configure() {
+
+	log.debug "binding to Thermostat and Fan Control cluster"
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0x000 {${device.zigbeeId}} {}", "delay 200",
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0x201 {${device.zigbeeId}} {}", "delay 200",
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0x202 {${device.zigbeeId}} {}", "delay 200",
+		
+		"zcl global send-me-a-report 1 0x20 0x20 3600 86400 {01}", "delay 100", //battery report request
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+
+def refresh()
+{
+	log.debug "refresh called"
+	[
+		"st rattr 0x${device.deviceNetworkId} 1 0x000 0x07", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x201 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x201 0x11", "delay 200",
+  		"st rattr 0x${device.deviceNetworkId} 1 0x201 0x12", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x201 0x1C", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x201 0x1E", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x201 0x23", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x001 0x20", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x202 0"
+	] + configure()
+}
+
+
+private getBatteryLevel(rawValue) {
+	def intValue = Integer.parseInt(rawValue,16)
+	def min = 2.1
+    def max = 3.0
+    def vBatt = intValue / 10
+    return ((vBatt - min) / (max - min) * 100) as int
+}
+
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}

smartapps/curb/curb-control.src/curb-control.groovy

@@ -65,7 +65,16 @@ void updateSwitch() {
 private void updateAll(devices) {
 	def command = request.JSON?.command
 	if (command) {
-		devices."$command"()
+		switch(command) {
+			case "on":
+				devices.on()
+				break
+			case "off":
+				devices.off()
+				break
+			default:
+				httpError(403, "Access denied. This command is not supported by current capability.")
+		}
 	}
 }
 
@@ -77,7 +86,16 @@ private void update(devices) {
 		if (!device) {
 			httpError(404, "Device not found")
 		} else {
-			device."$command"()
+			switch(command) {
+				case "on":
+					device.on()
+					break
+				case "off":
+					device.off()
+					break
+				default:
+					httpError(403, "Access denied. This command is not supported by current capability.")
+			}
 		}
 	}
 }

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -58,7 +58,7 @@ def authPage() {
 	if (canInstallLabs()) {
 
 		def redirectUrl = getBuildRedirectUrl()
-		log.debug "Redirect url = ${redirectUrl}"
+		// log.debug "Redirect url = ${redirectUrl}"
 
 		if (state.authToken) {
 			description = "Tap 'Next' to proceed"
@@ -113,13 +113,13 @@ def oauthInitUrl() {
 		scope: "read_station"
 	]
 
-	log.debug "REDIRECT URL: ${getVendorAuthPath() + toQueryString(oauthParams)}"
+	// log.debug "REDIRECT URL: ${getVendorAuthPath() + toQueryString(oauthParams)}"
 
 	redirect (location: getVendorAuthPath() + toQueryString(oauthParams))
 }
 
 def callback() {
-	log.debug "callback()>> params: $params, params.code ${params.code}"
+	// log.debug "callback()>> params: $params, params.code ${params.code}"
 
 	def code = params.code
 	def oauthState = params.state
@@ -135,7 +135,7 @@ def callback() {
 			scope: "read_station"
 		]
 
-		log.debug "TOKEN URL: ${getVendorTokenPath() + toQueryString(tokenParams)}"
+		// log.debug "TOKEN URL: ${getVendorTokenPath() + toQueryString(tokenParams)}"
 
 		def tokenUrl = getVendorTokenPath()
 		def params = [
@@ -144,7 +144,7 @@ def callback() {
 			body: tokenParams
 		]
 
-		log.debug "PARAMS: ${params}"
+		// log.debug "PARAMS: ${params}"
 
 		httpPost(params) { resp ->
 
@@ -156,7 +156,7 @@ def callback() {
 				state.refreshToken = data.refresh_token
 				state.authToken = data.access_token
 				state.tokenExpires = now() + (data.expires_in * 1000)
-				log.debug "swapped token: $resp.data"
+				// log.debug "swapped token: $resp.data"
 			}
 		}
 
@@ -292,7 +292,7 @@ def refreshToken() {
 
 			response.data.each {key, value ->
 				def data = slurper.parseText(key);
-				log.debug "Data: $data"
+				// log.debug "Data: $data"
 
 				state.refreshToken = data.refresh_token
 				state.accessToken = data.access_token

smartapps/imbrianj/safe-watch.src/safe-watch.groovy

@@ -26,9 +26,9 @@ preferences {
   }
 
   section("Temperature monitor?") {
-    input "temp",    "capability.temperatureMeasurement", title: "Temp Sensor", required: false
-    input "maxTemp", "number",                            title: "Max Temp?",   required: false
-    input "minTemp", "number",                            title: "Min Temp?",   required: false
+    input "temp",    "capability.temperatureMeasurement", title: "Temperature Sensor", required: false
+    input "maxTemp", "number",                            title: "Max Temperature (°${location.temperatureScale})",   required: false
+    input "minTemp", "number",                            title: "Min Temperature (°${location.temperatureScale})",   required: false
   }
 
   section("When which people are away?") {

smartapps/michaelstruck/smart-home-ventilation.src/smart-home-ventilation.groovy

@@ -14,7 +14,7 @@
  *	for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
 definition(
 	name: "Smart Home Ventilation",
     namespace: "MichaelStruck",
@@ -164,7 +164,7 @@ def installed() {
 def updated() {
     unschedule()
     turnOffSwitch() //Turn off all switches if the schedules are changed while in mid-schedule
-    unsubscribe
+    unsubscribe()
     log.debug "Updated with settings: ${settings}"
     init()
 }
@@ -174,12 +174,12 @@ def init() {
     schedule (midnightTime, midNight)
 	subscribe(location, "mode", locationHandler)
     startProcess()
-}    
+}
 
 // Common methods
 
 def startProcess () {
-    createDayArray() 
+    createDayArray()
 	state.dayCount=state.data.size()
     if (state.dayCount){
 		state.counter = 0
@@ -190,7 +190,7 @@ def startProcess () {
 def startDay() {
 	def start = convertEpoch(state.data[state.counter].start)
 	def stop = convertEpoch(state.data[state.counter].stop)
-      
+
     runOnce(start, turnOnSwitch, [overwrite: true])
     runOnce(stop, incDay, [overwrite: true])
 }
@@ -218,7 +218,7 @@ def locationHandler(evt) {
     }
 	if (!result) {
     	startProcess()
-    }	
+    }
 }
 
 def midNight(){
@@ -238,7 +238,7 @@ def turnOffSwitch() {
     }
     log.debug "Home ventilation switches are off."
 }
-    
+
 def schedDesc(on1, off1, on2, off2, on3, off3, on4, off4, modeList, dayList) {
 	def title = ""
 	def dayListClean = "On "
@@ -252,7 +252,7 @@ def schedDesc(on1, off1, on2, off2, on3, off3, on4, off4, modeList, dayList) {
             	dayListClean = "${dayListClean}, "
             }
         }
-	} 
+	}
     else {
     	dayListClean = "Every day"
     }
@@ -272,7 +272,7 @@ def schedDesc(on1, off1, on2, off2, on3, off3, on4, off4, modeList, dayList) {
             	modeListClean = "${modeListClean} ${modePrefix}"
         	}
         }
-	} 
+	}
     else {
     	modeListClean = "${modeListClean}all modes"
     }
@@ -283,16 +283,16 @@ def schedDesc(on1, off1, on2, off2, on3, off3, on4, off4, modeList, dayList) {
     	title += "\nSchedule 2: ${humanReadableTime(on2)} to ${humanReadableTime(off2)}"
     }
     if (on3 && off3) {
-    	title += "\nSchedule 3: ${humanReadableTime(on3)} to ${humanReadableTime(off3)}" 
+    	title += "\nSchedule 3: ${humanReadableTime(on3)} to ${humanReadableTime(off3)}"
     }
     if (on4 && off4) {
-    	title += "\nSchedule 4: ${humanReadableTime(on4)} to ${humanReadableTime(off4)}" 
+    	title += "\nSchedule 4: ${humanReadableTime(on4)} to ${humanReadableTime(off4)}"
     }
     if (on1 || on2 || on3 || on4) {
     	title += "\n$modeListClean"
-    	title += "\n$dayListClean" 
+    	title += "\n$dayListClean"
     }
-    
+
     if (!on1 && !on2 && !on3 && !on4) {
     	title="Click to configure scenario"
     }
@@ -374,7 +374,7 @@ def createDayArray() {
            timeOk(timeOnD1, timeOffD1)
            timeOk(timeOnD2, timeOffD2)
            timeOk(timeOnD3, timeOffD3)
-           timeOk(timeOnD4, timeOffD4)        
+           timeOk(timeOnD4, timeOffD4)
         }
     }
     state.data.sort{it.start}
@@ -384,7 +384,7 @@ def createDayArray() {
 
 private def textAppName() {
 	def text = "Smart Home Ventilation"
-}	
+}
 
 private def textVersion() {
     def text = "Version 2.1.2 (05/31/2015)"
@@ -416,4 +416,4 @@ private def textHelp() {
         "that each scenario does not overlap and run in separate modes (i.e. Home, Out of town, etc). Also note that you should  " +
         "avoid scheduling the ventilation fan at exactly midnight; the app resets itself at that time. It is suggested to start any new schedule " +
         "at 12:15 am or later."
-}
+}

smartapps/smartthings/beacon-control.src/beacon-control.groovy

@@ -114,13 +114,16 @@ def beaconHandler(evt) {
 
 	if (allOk) {
 		def data = new groovy.json.JsonSlurper().parseText(evt.data)
-		log.debug "<beacon-control> data: $data - phones: " + phones*.deviceNetworkId
+                // removed logging of device names. can be added back for debugging
+		//log.debug "<beacon-control> data: $data - phones: " + phones*.deviceNetworkId
 
 		def beaconName = getBeaconName(evt)
-		log.debug "<beacon-control> beaconName: $beaconName"
+                // removed logging of device names. can be added back for debugging
+		//log.debug "<beacon-control> beaconName: $beaconName"
 
 		def phoneName = getPhoneName(data)
-		log.debug "<beacon-control> phoneName: $phoneName"
+                // removed logging of device names. can be added back for debugging
+		//log.debug "<beacon-control> phoneName: $phoneName"
 		if (phoneName != null) {
             def action = data.presence == "1" ? "arrived" : "left"
             def msg = "$phoneName has $action ${action == 'arrived' ? 'at ' : ''}the $beaconName"

smartapps/smartthings/bon-voyage.src/bon-voyage.groovy

@@ -49,13 +49,15 @@ preferences {
 
 def installed() {
 	log.debug "Installed with settings: ${settings}"
-	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+        // commented out log statement because presence sensor label could contain user's name
+	//log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	subscribe(people, "presence", presence)
 }
 
 def updated() {
 	log.debug "Updated with settings: ${settings}"
-	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+        // commented out log statement because presence sensor label could contain user's name
+	//log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	unsubscribe()
 	subscribe(people, "presence", presence)
 }

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -20,6 +20,8 @@
  *      JLH - 02-15-2014 - Fuller use of ecobee API
  *      10-28-2015 DVCSMP-604 - accessory sensor, DVCSMP-1174, DVCSMP-1111 - not respond to routines
  */
+include 'asynchttp_v1'
+
 definition(
 		name: "Ecobee (Connect)",
 		namespace: "smartthings",
@@ -244,9 +246,7 @@ def getEcobeeThermostats() {
 		uri: apiEndpoint,
 		path: "/1/thermostat",
 		headers: ["Content-Type": "text/json", "Authorization": "Bearer ${atomicState.authToken}"],
-        // TODO - the query string below is not consistent with the Ecobee docs:
-        // https://www.ecobee.com/home/developer/api/documentation/v1/operations/get-thermostats.shtml
-		query: [format: 'json', body: toJson(bodyParams)]
+		query: [json: toJson(bodyParams)]
 	]
 
 	def stats = [:]
@@ -265,9 +265,8 @@ def getEcobeeThermostats() {
 	} catch (groovyx.net.http.HttpResponseException e) {
         log.trace "Exception polling children: " + e.response.data.status
         if (e.response.data.status.code == 14) {
-            atomicState.action = "getEcobeeThermostats"
             log.debug "Refreshing your auth_token!"
-            refreshAuthToken()
+            refreshAuthToken([async: false, nextAction: "getEcobeeThermostats"])
         }
     }
 	atomicState.thermostats = stats
@@ -358,16 +357,22 @@ def initialize() {
 	atomicState.timeSendPush = null
 	atomicState.reAttempt = 0
 
-	pollHandler() //first time polling data data from thermostat
+	initialPoll() //first time polling data data from thermostat
 
 	//automatically update devices status every 5 mins
 	runEvery5Minutes("poll")
 
 }
 
-def pollHandler() {
-	log.debug "pollHandler()"
-	pollChildren(null) // Hit the ecobee API for update on all thermostats
+/**
+ * Polls the child devices (synchronously).
+ * This is used during app install/update, and is synchronous
+ * to maintain current behavior that will cause install/update to fail
+ * if polling fails.
+ */
+def initialPoll() {
+	log.debug "initialPoll()"
+	pollChildrenSync() // Hit the ecobee API for update on all thermostats
 
 	atomicState.thermostats.each {stat ->
 		def dni = stat.key
@@ -380,36 +385,38 @@ def pollHandler() {
 	}
 }
 
-def pollChildren(child = null) {
-    def thermostatIdsString = getChildDeviceIdsString()
+/**
+ * Polls Ecobee (asynchronously) for updated device state data.
+ * Called from within this Connect SmartApp as well as the child
+ * devices.
+ */
+def poll() {
+    log.debug "polling asynchronously"
+    asynchttp_v1.get('asyncPollResponseHandler', getPollParams())
+}
+
+/**
+ * Makes a (synchronous) request to the Ecobee API to get the data for the thermostats.
+ * This request is made synchronously here because it is called as part of the
+ * install/updated lifecycle, and changing it to asynchronous during the install/update
+ * lifecycle may change the behavior if there is an error in polling.
+ *
+ * If further analysis shows that polling can be done asynchronously during
+ * install/update without any adverse consequences, this should then be made
+ * asynchronous just as the scheduled polling is.
+ */
+def pollChildrenSync() {
     log.debug "polling children: $thermostatIdsString"
 
-    def requestBody = [
-        selection: [
-            selectionType: "thermostats",
-            selectionMatch: thermostatIdsString,
-            includeExtendedRuntime: true,
-            includeSettings: true,
-            includeRuntime: true,
-            includeSensors: true
-        ]
-    ]
+    def params = getPollParams()
+    params.query << ["Content-Type": "application/json"]
 
 	def result = false
-
-	def pollParams = [
-        uri: apiEndpoint,
-        path: "/1/thermostat",
-        headers: ["Content-Type": "text/json", "Authorization": "Bearer ${atomicState.authToken}"],
-        // TODO - the query string below is not consistent with the Ecobee docs:
-        // https://www.ecobee.com/home/developer/api/documentation/v1/operations/get-thermostats.shtml
-        query: [format: 'json', body: toJson(requestBody)]
-    ]
+    log.debug "making synchronous poll request"
 
 	try{
-		httpGet(pollParams) { resp ->
+		httpGet(params) { resp ->
 			if(resp.status == 200) {
-                log.debug "poll results returned resp.data ${resp.data}"
                 atomicState.remoteSensors = resp.data.thermostatList.remoteSensors
                 updateSensorData()
                 storeThermostatData(resp.data.thermostatList)
@@ -420,40 +427,95 @@ def pollChildren(child = null) {
 	} catch (groovyx.net.http.HttpResponseException e) {
 		log.trace "Exception polling children: " + e.response.data.status
         if (e.response.data.status.code == 14) {
-            atomicState.action = "pollChildren"
             log.debug "Refreshing your auth_token!"
-            refreshAuthToken()
+            refreshAuthToken([async: false, nextAction: "pollChildrenSync"])
         }
 	}
 	return result
 }
 
-// Poll Child is invoked from the Child Device itself as part of the Poll Capability
-def pollChild() {
-	def devices = getChildDevices()
-
-	if (pollChildren()) {
-		devices.each { child ->
-			if (!child.device.deviceNetworkId.startsWith("ecobee_sensor")) {
-				if(atomicState.thermostats[child.device.deviceNetworkId] != null) {
-					def tData = atomicState.thermostats[child.device.deviceNetworkId]
-					log.info "pollChild(child)>> data for ${child.device.deviceNetworkId} : ${tData.data}"
-					child.generateEvent(tData.data) //parse received message from parent
-				} else if(atomicState.thermostats[child.device.deviceNetworkId] == null) {
-					log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId}"
-					return null
-				}
-			}
-		}
-	} else {
-		log.info "ERROR: pollChildren()"
-		return null
-	}
-
+/**
+ * Response handler for asynchronous request to get thermostat data.
+ * Given a successful response, updates the sensor data, stores the thermostat
+ * data, and generates child device events.
+ *
+ * If the access token has expired, will issue a request to refresh the token
+ * (and pending successful token refresh, the poll request will be made again).
+ */
+def asyncPollResponseHandler(response, data) {
+    log.trace "async poll response handler"
+    if (!response.hasError()) {
+        if (response.status == 200) {
+            def json
+            try {
+                json = response.getJson()
+            } catch (e) {
+                log.error ("error parsing JSON", e)
+            }
+            if (json) {
+                atomicState.remoteSensors = json.thermostatList.remoteSensors
+                updateSensorData()
+                storeThermostatData(json.thermostatList)
+                generateChildThermostatEvent()
+            }
+        } else {
+            log.warn "Response returned non-200 response. Status: ${response.status}, data: ${response.getData()}"
+        }
+    } else {
+        log.trace "Exception polling children: ${response.getErrorMessage()}"
+        def errorJson
+        try {
+            errorJson = response.getErrorJson()
+        } catch (e) {
+            log.error("Unable to parse error json response", e)
+        }
+        if (errorJson?.status?.code == 14) {
+            log.debug "Refreshing your auth_token!"
+            refreshAuthToken([async: true, nextAction: "poll"])
+        } else {
+            log.warn "Error polling children that is not due to an expired token. Response: ${response.getErrorData()}"
+        }
+    }
 }
 
-void poll() {
-	pollChild()
+private getPollParams() {
+    def thermostatIdsString = getChildDeviceIdsString()
+    def requestBody = [
+        selection: [
+            selectionType: "thermostats",
+            selectionMatch: thermostatIdsString,
+            includeExtendedRuntime: true,
+            includeSettings: true,
+            includeRuntime: true,
+            includeSensors: true
+        ]
+    ]
+    return [
+        uri: apiEndpoint,
+        path: "/1/thermostat",
+        headers: ["Authorization": "Bearer ${atomicState.authToken}"],
+        query: [json: toJson(requestBody)]
+    ]
+}
+
+/**
+ * Calls each child thermostat device to generate an event with the thermostat
+ * data.
+ */
+def generateChildThermostatEvent() {
+    log.trace("generateChildThermostatEvent")
+    getChildDevices().each { child ->
+        if (!child.device.deviceNetworkId.startsWith("ecobee_sensor")){
+            if(atomicState.thermostats[child.device.deviceNetworkId] != null) {
+                def tData = atomicState.thermostats[child.device.deviceNetworkId]
+                log.debug "calling child.generateEvent($tData.data)"
+                child.generateEvent(tData.data) //parse received message from parent
+            } else if(atomicState.thermostats[child.device.deviceNetworkId] == null) {
+                log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId}"
+                return null
+            }
+        }
+    }
 }
 
 def availableModes(child) {
@@ -553,47 +615,104 @@ def toQueryString(Map m) {
 	return m.collect { k, v -> "${k}=${URLEncoder.encode(v.toString())}" }.sort().join("&")
 }
 
-private refreshAuthToken() {
-	log.debug "refreshing auth token"
+/**
+ * Uses the refresh token to get a new access token, then executes the nextAction.
+ * @param options - a map of options. valid options are async: true/false, which
+ *                  specifies if the refresh token request will be done asynchronously or not (default is false)
+ *                  nextAction: "nameOfMethod" specifies what method to execute after
+ *                  the token is refreshed (not required).
+ * (note: using a map as the parameter because we need to call it from a schedueled
+ * execution and we can only pass a data map to scheduled executions)
+ */
+private void refreshAuthToken(options) {
+    if(!atomicState.refreshToken) {
+		log.warn "Cannot not refresh OAuth token since there is no refreshToken stored"
+    } else {
+        def refreshParams = [
+            uri   : apiEndpoint,
+            path  : "/token",
+            query : [grant_type: 'refresh_token', code: "${atomicState.refreshToken}", client_id: smartThingsClientId],
+        ]
+        if (options.async) {
+            refreshAuthTokenAsync(refreshParams, options.nextAction)
+        } else {
+            refreshAuthTokenSync(refreshParams, options.nextAction)
+        }
+    }
+}
 
-	if(!atomicState.refreshToken) {
-		log.warn "Can not refresh OAuth token since there is no refreshToken stored"
-	} else {
-		def refreshParams = [
-			method: 'POST',
-			uri   : apiEndpoint,
-			path  : "/token",
-			query : [grant_type: 'refresh_token', code: "${atomicState.refreshToken}", client_id: smartThingsClientId],
-		]
-
-		def notificationMessage = "is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials."
-		//changed to httpPost
-		try {
-			def jsonMap
-			httpPost(refreshParams) { resp ->
-				if(resp.status == 200) {
-					log.debug "Token refreshed...calling saved RestAction now!"
-					debugEvent("Token refreshed ... calling saved RestAction now!")
-					saveTokenAndResumeAction(resp.data)
-			    }
+private void refreshAuthTokenSync(params, nextAction = null) {
+    try {
+        httpPost(refreshParams) { resp ->
+            if(resp.status == 200) {
+                log.debug "Token refreshed...calling saved RestAction now!"
+                debugEvent("Token refreshed ... calling saved RestAction now!")
+                saveTokenAndResumeAction(resp.data, nextAction)
             }
-		} catch (groovyx.net.http.HttpResponseException e) {
-			log.error "refreshAuthToken() >> Error: e.statusCode ${e.statusCode}"
-			def reAttemptPeriod = 300 // in sec
-			if (e.statusCode != 401) { // this issue might comes from exceed 20sec app execution, connectivity issue etc.
-				runIn(reAttemptPeriod, "refreshAuthToken")
-			} else if (e.statusCode == 401) { // unauthorized
-				atomicState.reAttempt = atomicState.reAttempt + 1
-				log.warn "reAttempt refreshAuthToken to try = ${atomicState.reAttempt}"
-				if (atomicState.reAttempt <= 3) {
-					runIn(reAttemptPeriod, "refreshAuthToken")
-				} else {
-					sendPushAndFeeds(notificationMessage)
-					atomicState.reAttempt = 0
-				}
-			}
-		}
-	}
+        }
+    } catch (groovyx.net.http.HttpResponseException e) {
+        log.error "refreshAuthToken() >> Error: e.statusCode ${e.statusCode}"
+        reauthTokenErrorHandler(e.statusCode)
+    }
+}
+
+private void refreshAuthTokenAsync(refreshParams, nextAction = null) {
+    log.debug "making asynchronous refresh request"
+    asynchttp_v1.post('refreshTokenResponseHandler', refreshParams, [nextAction: nextAction])
+}
+
+/**
+ * The response handler for the request to refresh the authorization handler.
+ * Stores the new authorization token and refresh token, and executes any action
+ * (method) that failed due to the authorization token expiring.
+ */
+private void refreshTokenResponseHandler(response, data) {
+    if (!response.hasError()) {
+        if (response.status == 200) {
+            def json
+            try {
+            	json = response.getJson()
+            } catch (e) {
+            	log.error "error parsing json from response data: $response.data"
+            }
+            if (json) {
+                log.debug "asnyc refreshTokenHandler: Token refreshed...calling saved RestAction now!"
+                debugEvent("async Token refreshed ... calling saved RestAction now!")
+             	saveTokenAndResumeAction(json, data.nextAction)
+            } else {
+            	log.warn "successfully parsed json but result is empty or null"
+            }
+        } else {
+            log.debug "Non 200 response returned. Response code: ${response.code}, data: ${response.getData()}"
+        }
+    } else {
+        log.debug "async refreshTokenHandler: RESPONSE ERROR: ${response.getErrorJson()}"
+        reauthTokenErrorHandler(response.getErrorJson().code)
+    }
+}
+
+/**
+ * Retries refreshing the authorization token. Will attempt to get the refresh
+ * token later, in case there were errors retrieving it.
+ * Will retry a fixed number of times before sending a push notification to the
+ * user instructing them to reauthenticate
+ */
+private void reauthTokenErrorHandler(responseCode) {
+    def retryInterval = 300 // in seconds
+    def notificationMessage = "is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials."
+    // might get non-401 error from exceeding 20 second app limit, connectivity issues, etc.
+    if (responseCode != 401) {
+        runIn(retryInterval, "refreshAuthToken", [async: true])
+    } else if (responseCode == 401) { // unauthorized
+        atomicState.reAttempt = atomicState.reAttempt + 1
+        log.warn "reAttempt refreshAuthToken to try = ${atomicState.reAttempt}"
+        if (atomicState.reAttempt <= 3) {
+            runIn(retryInterval, "refreshAuthToken", [async: true])
+        } else {
+            sendPushAndFeeds(notificationMessage)
+            atomicState.reAttempt = 0
+        }
+    }
 }
 
 /**
@@ -603,20 +722,20 @@ private refreshAuthToken() {
  *
  * @param json - an object representing the parsed JSON response from Ecobee
  */
-private void saveTokenAndResumeAction(json) {
-    log.debug "token response json: $json"
+private void saveTokenAndResumeAction(json, String nextAction) {
+    def debugMessage = "token response, scope: ${json?.scope}, expires_in: ${json?.expires_in}, token_type: ${json?.token_type}"
+    log.debug "debugMessage"
     if (json) {
-        debugEvent("Response = $json")
+        debugEvent(debugMessage)
         atomicState.refreshToken = json?.refresh_token
         atomicState.authToken = json?.access_token
-        if (atomicState.action) {
-            log.debug "got refresh token, executing next action: ${atomicState.action}"
-            "${atomicState.action}"()
+        if (nextAction) {
+            log.debug "got refresh token, will execute next action (passed in!): $nextAction"
+            "$nextAction"()
         }
     } else {
         log.warn "did not get response body from refresh token response"
     }
-    atomicState.action = ""
 }
 
 /**
@@ -756,7 +875,6 @@ private boolean sendCommandToEcobee(Map bodyParams) {
 	try{
         httpPost(cmdParams) { resp ->
             if(resp.status == 200) {
-                log.debug "updated ${resp.data}"
                 def returnStatus = resp.data.status.code
                 if (returnStatus == 0) {
                     log.debug "Successful call to ecobee API."
@@ -771,11 +889,10 @@ private boolean sendCommandToEcobee(Map bodyParams) {
         log.trace "Exception Sending Json: " + e.response.data.status
         debugEvent ("sent Json & got http status ${e.statusCode} - ${e.response.data.status.code}")
         if (e.response.data.status.code == 14) {
-            // TODO - figure out why we're setting the next action to be pollChildren
+            // TODO - figure out why we're setting the next action to be poll
             // after refreshing auth token. Is it to keep UI in sync, or just copy/paste error?
-            atomicState.action = "pollChildren"
             log.debug "Refreshing your auth_token!"
-            refreshAuthToken()
+            refreshAuthToken([async: true, nextAction: "poll"])
         } else {
             debugEvent("Authentication error, invalid authentication method, lack of credentials, etc.")
             log.error "Authentication error, invalid authentication method, lack of credentials, etc."

smartapps/smartthings/flood-alert.src/flood-alert.groovy

@@ -54,10 +54,10 @@ def waterWetHandler(evt) {
 	def alreadySentSms = recentEvents.count { it.value && it.value == "wet" } > 1
 
 	if (alreadySentSms) {
-		log.debug "SMS already sent to $phone within the last $deltaSeconds seconds"
+		log.debug "SMS already sent within the last $deltaSeconds seconds"
 	} else {
 		def msg = "${alarm.displayName} is wet!"
-		log.debug "$alarm is wet, texting $phone"
+		log.debug "$alarm is wet, texting phone number"
 
 		if (location.contactBookEnabled) {
 			sendNotificationToContacts(msg, recipients)

smartapps/smartthings/garage-door-monitor.src/garage-door-monitor.groovy

@@ -90,7 +90,7 @@ def takeAction(){
 }
 
 def sendTextMessage() {
-	log.debug "$multisensor was open too long, texting $phone"
+	log.debug "$multisensor was open too long, texting phone"
 
 	updateSmsHistory()
 	def openMinutes = maxOpenTime * (state.smsHistory?.size() ?: 1)

smartapps/smartthings/greetings-earthling.src/greetings-earthling.groovy

@@ -47,13 +47,13 @@ preferences {
 
 def installed() {
 	log.debug "Installed with settings: ${settings}"
-	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+	// log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	subscribe(people, "presence", presence)
 }
 
 def updated() {
 	log.debug "Updated with settings: ${settings}"
-	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+	// log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	unsubscribe()
 	subscribe(people, "presence", presence)
 }
@@ -71,11 +71,10 @@ def presence(evt)
 			def person = getPerson(evt)
 			def recentNotPresent = person.statesSince("presence", t0).find{it.value == "not present"}
 			if (recentNotPresent) {
-				log.debug "skipping notification of arrival of ${person.displayName} because last departure was only ${now() - recentNotPresent.date.time} msec ago"
+				log.debug "skipping notification of arrival of Person because last departure was only ${now() - recentNotPresent.date.time} msec ago"
 			}
 			else {
 				def message = "${person.displayName} arrived at home, changing mode to '${newMode}'"
-				log.info message
 				send(message)
 				setLocationMode(newMode)
 			}
@@ -106,6 +105,4 @@ private send(msg) {
             sendSms(phone, msg)
         }
     }
-
-	log.debug msg
 }

smartapps/smartthings/habit-helper.src/habit-helper.groovy

@@ -57,12 +57,11 @@ def scheduleCheck()
 	def message = message1 ?: "SmartThings - Habit Helper Reminder!"
 
     if (location.contactBookEnabled) {
-        log.debug "Texting reminder: ($message) to contacts:${recipients?.size()}"
+        log.debug "Texting reminder to contacts:${recipients?.size()}"
         sendNotificationToContacts(message, recipients)
     }
     else {
-
-        log.debug "Texting reminder: ($message) to $phone1"
+        log.debug "Texting reminder"
         sendSms(phone1, message)
     }
 }

smartapps/smartthings/it-moved.src/it-moved.groovy

@@ -53,14 +53,14 @@ def accelerationActiveHandler(evt) {
 	def alreadySentSms = recentEvents.count { it.value && it.value == "active" } > 1
 
 	if (alreadySentSms) {
-		log.debug "SMS already sent to $phone1 within the last $deltaSeconds seconds"
+		log.debug "SMS already sent within the last $deltaSeconds seconds"
 	} else {
         if (location.contactBookEnabled) {
-            log.debug "$accelerationSensor has moved, texting contacts: ${recipients?.size()}"
+            log.debug "accelerationSensor has moved, texting contacts: ${recipients?.size()}"
             sendNotificationToContacts("${accelerationSensor.label ?: accelerationSensor.name} moved", recipients)
         }
         else {
-            log.debug "$accelerationSensor has moved, texting $phone1"
+            log.debug "accelerationSensor has moved, sending text message"
             sendSms(phone1, "${accelerationSensor.label ?: accelerationSensor.name} moved")
         }
 	}

smartapps/smartthings/its-too-hot.src/its-too-hot.groovy

@@ -69,10 +69,10 @@ def temperatureHandler(evt) {
 		def alreadySentSms = recentEvents.count { it.doubleValue >= tooHot } > 1
 
 		if (alreadySentSms) {
-			log.debug "SMS already sent to $phone1 within the last $deltaMinutes minutes"
+			log.debug "SMS already sent within the last $deltaMinutes minutes"
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
-			log.debug "Temperature rose above $tooHot:  sending SMS to $phone1 and activating $mySwitch"
+			log.debug "Temperature rose above $tooHot:  sending SMS and activating $mySwitch"
 			def tempScale = location.temperatureScale ?: "F"
 			send("${temperatureSensor1.displayName} is too hot, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
 			switch1?.on()

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -50,9 +50,9 @@ def authPage() {
 		}
 		def description = "Tap to enter LIFX credentials"
 		def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${apiServerUrl}" // this triggers oauthInit() below
-//        def redirectUrl = "${apiServerUrl}"
-        log.debug "app id: ${app.id}"
-		log.debug "redirect url: ${redirectUrl}"
+		// def redirectUrl = "${apiServerUrl}"
+		// log.debug "app id: ${app.id}"
+		// log.debug "redirect url: ${redirectUrl}"s
 		return dynamicPage(name: "Credentials", title: "Connect to LIFX", nextPage: null, uninstall: true, install:true) {
 			section {
 				href(url:redirectUrl, required:true, title:"Connect to LIFX", description:"Tap here to connect your LIFX account")
@@ -372,7 +372,7 @@ def updateDevices() {
 		def childDevice = getChildDevice(device.id)
 		selectors.add("${device.id}")
 		if (!childDevice) {
-			log.info("Adding device ${device.id}: ${device.product}")
+			// log.info("Adding device ${device.id}: ${device.product}")
 			def data = [
 					label: device.label,
 					level: Math.round((device.brightness ?: 1) * 100),

smartapps/smartthings/presence-change-push.src/presence-change-push.groovy

@@ -41,10 +41,10 @@ def updated() {
 
 def presenceHandler(evt) {
 	if (evt.value == "present") {
-		log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
+		// log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
     	sendPush("${presence.label ?: presence.name} has arrived at the ${location}")
 	} else if (evt.value == "not present") {
-		log.debug "${presence.label ?: presence.name} has left the ${location}"
+		// log.debug "${presence.label ?: presence.name} has left the ${location}"
     	sendPush("${presence.label ?: presence.name} has left the ${location}")
 	}
 }

smartapps/smartthings/presence-change-text.src/presence-change-text.groovy

@@ -47,7 +47,7 @@ def updated() {
 
 def presenceHandler(evt) {
 	if (evt.value == "present") {
-		log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
+		// log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
 
         if (location.contactBookEnabled) {
             sendNotificationToContacts("${presence.label ?: presence.name} has arrived at the ${location}", recipients)
@@ -56,7 +56,7 @@ def presenceHandler(evt) {
             sendSms(phone1, "${presence.label ?: presence.name} has arrived at the ${location}")
         }
 	} else if (evt.value == "not present") {
-		log.debug "${presence.label ?: presence.name} has left the ${location}"
+		// log.debug "${presence.label ?: presence.name} has left the ${location}"
 
         if (location.contactBookEnabled) {
             sendNotificationToContacts("${presence.label ?: presence.name} has left the ${location}", recipients)

smartapps/smartthings/ridiculously-automated-garage-door.src/ridiculously-automated-garage-door.groovy

@@ -67,7 +67,7 @@ def updated() {
 }
 
 def subscribe() {
-	log.debug "present: ${cars.collect{it.displayName + ': ' + it.currentPresence}}"
+	// log.debug "present: ${cars.collect{it.displayName + ': ' + it.currentPresence}}"
 	subscribe(doorSensor, "contact", garageDoorContact)
 
 	subscribe(cars, "presence", carPresence)

smartapps/smartthings/smart-security.src/smart-security.groovy

@@ -71,7 +71,7 @@ def updated() {
 private subscribeToEvents()
 {
 	subscribe intrusionMotions, "motion", intruderMotion
-	subscribe residentMotions, "motion", residentMotion
+	// subscribe residentMotions, "motion", residentMotion
 	subscribe intrusionContacts, "contact", contact
 	subscribe alarms, "alarm", alarm
 	subscribe(app, appTouch)
@@ -156,6 +156,7 @@ def residentMotion(evt)
 	//    	startReArmSequence()
 	//    }
 	//}
+  unsubscribe(residentMotions)
 }
 
 def contact(evt)
@@ -214,7 +215,7 @@ def checkForReArm()
 	}
 	else {
 		log.warn "checkForReArm: lastIntruderMotion was null, unable to check for re-arming intrusion detection"
-	}	
+	}
 }
 
 private startAlarmSequence()

smartapps/smartthings/text-me-when-it-opens.src/text-me-when-it-opens.groovy

@@ -48,7 +48,7 @@ def updated()
 
 def contactOpenHandler(evt) {
 	log.trace "$evt.value: $evt, $settings"
-	log.debug "$contact1 was opened, texting $phone1"
+  log.debug "$contact1 was opened, sending text"
     if (location.contactBookEnabled) {
         sendNotificationToContacts("Your ${contact1.label ?: contact1.name} was opened", recipients)
     }

smartapps/smartthings/text-me-when-theres-motion-and-im-not-here.src/text-me-when-theres-motion-and-im-not-here.groovy

@@ -50,7 +50,7 @@ def updated() {
 
 def motionActiveHandler(evt) {
 	log.trace "$evt.value: $evt, $settings"
-	
+
 	if (presence1.latestValue("presence") == "not present") {
 		// Don't send a continuous stream of text messages
 		def deltaSeconds = 10
@@ -60,14 +60,14 @@ def motionActiveHandler(evt) {
 		def alreadySentSms = recentEvents.count { it.value && it.value == "active" } > 1
 
 		if (alreadySentSms) {
-			log.debug "SMS already sent to $phone1 within the last $deltaSeconds seconds"
+			log.debug "SMS already sent within the last $deltaSeconds seconds"
 		} else {
             if (location.contactBookEnabled) {
                 log.debug "$motion1 has moved while you were out, sending notifications to: ${recipients?.size()}"
                 sendNotificationToContacts("${motion1.label} ${motion1.name} moved while you were out", recipients)
             }
             else {
-                log.debug "$motion1 has moved while you were out, texting $phone1"
+                log.debug "$motion1 has moved while you were out, sending text"
                 sendSms(phone1, "${motion1.label} ${motion1.name} moved while you were out")
             }
 		}

smartapps/smartthings/the-gun-case-moved.src/the-gun-case-moved.groovy

@@ -53,13 +53,13 @@ def accelerationActiveHandler(evt) {
 	def alreadySentSms = recentEvents.count { it.value && it.value == "active" } > 1
 
 	if (alreadySentSms) {
-		log.debug "SMS already sent to $phone1 within the last $deltaSeconds seconds"
+		log.debug "SMS already sent to phone within the last $deltaSeconds seconds"
 	} else {
         if (location.contactBookEnabled) {
             sendNotificationToContacts("Gun case has moved!", recipients)
         }
         else {
-            log.debug "$accelerationSensor has moved, texting $phone1"
+            log.debug "$accelerationSensor has moved, texting phone"
             sendSms(phone1, "Gun case has moved!")
         }
 	}

smartapps/smartthings/withings.src/withings.groovy

@@ -60,7 +60,7 @@ def authPage() {
 
 def oauthInitUrl() {
 	def token = getToken()
-	log.debug "initiateOauth got token: $token"
+	//log.debug "initiateOauth got token: $token"
 
 	// store these for validate after the user takes the oauth journey
 	state.oauth_request_token = token.oauth_token
@@ -76,7 +76,7 @@ def getToken() {
 	]
 	def requestTokenBaseUrl = "https://oauth.withings.com/account/request_token"
 	def url = buildSignedUrl(requestTokenBaseUrl, params)
-	log.debug "getToken - url: $url"
+	//log.debug "getToken - url: $url"
 
 	return getJsonFromUrl(url)
 }
@@ -182,7 +182,7 @@ def exchangeToken() {
 
 	def requestTokenBaseUrl = "https://oauth.withings.com/account/access_token"
 	def url = buildSignedUrl(requestTokenBaseUrl, params, tokenSecret)
-	log.debug "signed url: $url with secret $tokenSecret"
+	//log.debug "signed url: $url with secret $tokenSecret"
 
 	def token = getJsonFromUrl(url)
 
@@ -198,8 +198,8 @@ def exchangeToken() {
 
 def load() {
 	def json = get(getMeasurement(new Date() - 30))
-
-	log.debug "swapped, then received: $json"
+	// removed logging of actual json payload.  Can be put back for debugging
+	log.debug "swapped, then received json"
 	parse(data:json)
 
 	def html = """