Merge pull request #1246 from skt123/osram

CHF-356 : Modifying Readme for Core Devices
Merge pull request #1273 from SmartThingsCommunity/staging
2026-03-09 21:03:00 +00:00 · 2016-09-20 14:24:27 -07:00 · 2016-09-20 12:05:10 -07:00 · 2016-09-20 17:20:50 +05:30 · 2016-09-19 17:22:19 -07:00 · 2016-09-14 09:43:26 -04:00
17 changed files with 147 additions and 28 deletions
--- a/devicetypes/smartthings/cree-bulb.src/README.md
+++ b/devicetypes/smartthings/cree-bulb.src/README.md
@@ -23,10 +23,8 @@ Works with:

 ## Device Health

-A Category C6 Connected Cree LED Bulb with maxReportTime of 10 min.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*10 = 20 min
+A Category C6 Connected Cree LED Bulb with maxReportTime of 5 mins.
+Check-in interval = 12 mins

 ## Troubleshooting

--- a/devicetypes/smartthings/smartpower-outlet.src/README.md
+++ b/devicetypes/smartthings/smartpower-outlet.src/README.md
@@ -23,10 +23,10 @@ Works with:

 ## Device Health

-A Category C1 smart power outlet with maxReportTime of 10 min.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C1 smart power outlet with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*10 = 20 min
+Check-in interval = 12 mins

 ## Troubleshooting

--- a/devicetypes/smartthings/smartsense-moisture-sensor.src/README.md
+++ b/devicetypes/smartthings/smartsense-moisture-sensor.src/README.md
@@ -23,10 +23,10 @@ Works with:

 ## Device Health

-A Category C2 moisture sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C2 moisture sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
+Check-in interval = 12 mins

 ## Battery Specification

--- a/devicetypes/smartthings/smartsense-motion-sensor.src/README.md
+++ b/devicetypes/smartthings/smartsense-motion-sensor.src/README.md
@@ -22,10 +22,10 @@ Works with:

 ## Device Health

-A Category C2 motion sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C2 motion sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime.
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
+Check-in interval = 12 mins

 ## Battery Specification

--- a/devicetypes/smartthings/smartsense-multi-sensor.src/README.md
+++ b/devicetypes/smartthings/smartsense-multi-sensor.src/README.md
@@ -26,10 +26,10 @@ Works with:

 ## Device Health

-A Category C2 multi sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C2 multi sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
+Check-in interval = 12 mins

 ## Battery Specification

--- a/devicetypes/smartthings/smartsense-open-closed-sensor.src/README.md
+++ b/devicetypes/smartthings/smartsense-open-closed-sensor.src/README.md
@@ -24,10 +24,10 @@ Works with:

 ## Device Health

-A Category C2 open/closed sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C2 open/closed sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
+Check-in interval = 12 mins

 ## Battery Specification

--- a/devicetypes/smartthings/smartsense-temp-humidity-sensor.src/README.md
+++ b/devicetypes/smartthings/smartsense-temp-humidity-sensor.src/README.md
@@ -24,10 +24,10 @@ Works with:

 ## Device Health

-A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
+Check-in interval = 12 mins

 ## Battery Specification

--- a/devicetypes/smartthings/zigbee-dimmer.src/.st-ignore
+++ b/devicetypes/smartthings/zigbee-dimmer.src/.st-ignore
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
--- a/devicetypes/smartthings/zigbee-dimmer.src/README.md
+++ b/devicetypes/smartthings/zigbee-dimmer.src/README.md
@@ -0,0 +1,36 @@
+# OSRAM Lightify LED On/Off/Dim
+
+
+
+Works with: 
+
+* [OSRAM Lightify LED On/Off/Dim](https://shop.smartthings.com/#!/products/osram-led-smart-bulb-on-off-dim)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - represents current light level, usually 0-100 in percent
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C1 Zigbee dimmer with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Other troubleshooting tips are listed as follows:
+* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/207191763-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-On-Off-Dim)
--- a/devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy
+++ b/devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy
@@ -13,7 +13,7 @@
 */

 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", category: "C1") {
        capability "Actuator"
        capability "Configuration"
        capability "Refresh"
--- a/devicetypes/smartthings/zigbee-rgbw-bulb.src/.st-ignore
+++ b/devicetypes/smartthings/zigbee-rgbw-bulb.src/.st-ignore
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
--- a/devicetypes/smartthings/zigbee-rgbw-bulb.src/README.md
+++ b/devicetypes/smartthings/zigbee-rgbw-bulb.src/README.md
@@ -0,0 +1,42 @@
+# OSRAM LIGHTIFY LED RGBW Bulb
+
+
+
+Works with: 
+
+* [OSRAM LIGHTIFY LED RGBW Bulb](https://support.smartthings.com/hc/en-us/articles/207728173-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-RGBW)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Actuator** - It represents that a device has commands.
+* **Color Control** - It represents that the color attributes of a device can be controlled (hue, saturation, color value).
+* **Color Temperature** - It represents color temperature capability measured in degree Kelvin.
+* **Polling** - It represents that a device can be polled.
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - can detect current light level (0-100 in percent)
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+A Category C6 OSRAM LIGHTIFY LED RGBW Bulb with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+It may also happen that you need to reset the device.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/207728173-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-RGBW)
--- a/devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy
+++ b/devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy
@@ -17,7 +17,7 @@
 */

 metadata {
-    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings", category: "C6") {

        capability "Actuator"
        capability "Color Control"
--- a/devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/.st-ignore
+++ b/devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/.st-ignore
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
--- a/devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/README.md
+++ b/devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/README.md
@@ -0,0 +1,37 @@
+# OSRAM Lightify Tunable 60 White
+
+
+
+Works with: 
+
+* [OSRAM Lightify Tunable 60 White](http://www.osram.com/osram_com/tools-and-services/tools/lightify---smart-connected-light/lightify-for-home---what-is-light-to-you/lightify-products/lightify-classic-a60-tunable-white/index.jsp)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Color Temperature** - represents color temperature, measured in degrees Kelvin.
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated.
+* **Refresh** - _refresh()_ command for status updates
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - represents current light level, usually 0-100 in percent
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C1 OSRAM Lightify Tunable 60 White with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Other troubleshooting tips are listed as follows:
+* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/204576454-OSRAM-LIGHTIFY-Tunable-White-60-Bulb)
--- a/devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy
+++ b/devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy
@@ -17,7 +17,7 @@
 */

 metadata {
-    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings", category: "C1") {

        capability "Actuator"
        capability "Color Temperature"
--- a/smartapps/imbrianj/safe-watch.src/safe-watch.groovy
+++ b/smartapps/imbrianj/safe-watch.src/safe-watch.groovy
@@ -26,9 +26,9 @@ preferences {
  }

  section("Temperature monitor?") {
-    input "temp",    "capability.temperatureMeasurement", title: "Temp Sensor", required: false
-    input "maxTemp", "number",                            title: "Max Temp?",   required: false
-    input "minTemp", "number",                            title: "Min Temp?",   required: false
+    input "temp",    "capability.temperatureMeasurement", title: "Temperature Sensor", required: false
+    input "maxTemp", "number",                            title: "Max Temperature (°${location.temperatureScale})",   required: false
+    input "minTemp", "number",                            title: "Min Temperature (°${location.temperatureScale})",   required: false
  }

  section("When which people are away?") {
Author	SHA1	Message	Date
Jack Chi	71880e2644	Merge pull request #1246 from skt123/osram CHF-356 : Modifying Readme for Core Devices	2016-09-20 14:24:27 -07:00
Vinay Rao	8d920ea072	Merge pull request #1273 from SmartThingsCommunity/staging Rolling down staging hotfix to master	2016-09-20 12:05:10 -07:00
sushant.k1	ced03d746d	Added Readme files for the following devices: 1. OSRAM Lightify LED On/Off/Dim 2. OSRAM Lightify LED RGBW 3. OSRAM Lightify Tunable 60 White Modified Readme files for the following devices: 1. SmartSense Moisture Sensor 2. SmartSense Temp/Humidity Sensor 3. SmartSense Multi Sensor 4. SmartSense Open/closed Sensor 5. SmartPower Outlet 6. Connected Cree Bulb 7. SmartSense Motion Sensor Added Readme files for the following devices: 1. OSRAM Lightify LED On/Off/Dim 2. OSRAM Lightify LED RGBW 3. OSRAM Lightify Tunable 60 White Modified Readme files for the following devices: 1. SmartSense Moisture Sensor 2. SmartSense Temp/Humidity Sensor 3. SmartSense Multi Sensor 4. SmartSense Open/closed Sensor 5. SmartPower Outlet 6. Connected Cree Bulb 7. SmartSense Motion Sensor Added Readme files for the following devices: 1. OSRAM Lightify LED On/Off/Dim 2. OSRAM Lightify LED RGBW 3. OSRAM Lightify Tunable 60 White Modified Readme files for the following devices: 1. SmartSense Moisture Sensor 2. SmartSense Temp/Humidity Sensor 3. SmartSense Multi Sensor 4. SmartSense Open/closed Sensor 5. SmartPower Outlet 6. Connected Cree Bulb 7. SmartSense Motion Sensor Added Readme files for the following devices: 1. OSRAM Lightify LED On/Off/Dim 2. OSRAM Lightify LED RGBW 3. OSRAM Lightify Tunable 60 White Modified Readme files for the following devices: 1. SmartSense Moisture Sensor 2. SmartSense Temp/Humidity Sensor 3. SmartSense Multi Sensor 4. SmartSense Open/closed Sensor 5. SmartPower Outlet 6. Connected Cree Bulb 7. SmartSense Motion Sensor	2016-09-20 17:20:50 +05:30
Vinay Rao	5341d0d06f	Merge pull request #1268 from SmartThingsCommunity/staging Rolling down staging hotfix to master	2016-09-19 17:22:19 -07:00
Juan Pablo Risso	a6c7ab49b6	SSVD-2737 - Temperature Unit (#1247 )	2016-09-14 09:43:26 -04:00