Merge pull request #985 from SmartThingsCommunity/MSA-1351-2

MSA-1351: Gideon AI implementation

devicetypes/smartthings/cree-bulb.src/README.md

@@ -23,10 +23,8 @@ Works with:
 
 ## Device Health
 
-A Category C6 Connected Cree LED Bulb with maxReportTime of 10 min.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*10 = 20 min
+A Category C6 Connected Cree LED Bulb with maxReportTime of 5 mins.
+Check-in interval = 12 mins
 
 ## Troubleshooting
 

devicetypes/smartthings/smartpower-outlet.src/README.md

@@ -23,10 +23,10 @@ Works with:
 
 ## Device Health
 
-A Category C1 smart power outlet with maxReportTime of 10 min.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C1 smart power outlet with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*10 = 20 min
+Check-in interval = 12 mins
 
 ## Troubleshooting
 

devicetypes/smartthings/smartsense-moisture-sensor.src/README.md

@@ -23,10 +23,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 moisture sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C2 moisture sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -22,10 +22,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 motion sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C2 motion sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime.
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-multi-sensor.src/README.md

@@ -26,10 +26,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 multi sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C2 multi sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/README.md

@@ -24,10 +24,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 open/closed sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C2 open/closed sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/README.md

@@ -24,10 +24,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/zigbee-dimmer.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-dimmer.src/README.md

@@ -0,0 +1,36 @@
+# OSRAM Lightify LED On/Off/Dim
+
+
+
+Works with: 
+
+* [OSRAM Lightify LED On/Off/Dim](https://shop.smartthings.com/#!/products/osram-led-smart-bulb-on-off-dim)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - represents current light level, usually 0-100 in percent
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C1 Zigbee dimmer with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Other troubleshooting tips are listed as follows:
+* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/207191763-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-On-Off-Dim)

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", category: "C1") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -31,7 +31,8 @@
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
-    }
+	fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
+	}
 
     tiles(scale: 2) {
 		multiAttributeTile(name:"toggle", type:"generic", width:6, height:4){

devicetypes/smartthings/zigbee-rgbw-bulb.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-rgbw-bulb.src/README.md

@@ -0,0 +1,42 @@
+# OSRAM LIGHTIFY LED RGBW Bulb
+
+
+
+Works with: 
+
+* [OSRAM LIGHTIFY LED RGBW Bulb](https://support.smartthings.com/hc/en-us/articles/207728173-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-RGBW)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Actuator** - It represents that a device has commands.
+* **Color Control** - It represents that the color attributes of a device can be controlled (hue, saturation, color value).
+* **Color Temperature** - It represents color temperature capability measured in degree Kelvin.
+* **Polling** - It represents that a device can be polled.
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - can detect current light level (0-100 in percent)
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+A Category C6 OSRAM LIGHTIFY LED RGBW Bulb with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+It may also happen that you need to reset the device.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/207728173-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-RGBW)

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings", category: "C6") {
 
         capability "Actuator"
         capability "Color Control"

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/README.md

@@ -0,0 +1,37 @@
+# OSRAM Lightify Tunable 60 White
+
+
+
+Works with: 
+
+* [OSRAM Lightify Tunable 60 White](http://www.osram.com/osram_com/tools-and-services/tools/lightify---smart-connected-light/lightify-for-home---what-is-light-to-you/lightify-products/lightify-classic-a60-tunable-white/index.jsp)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Color Temperature** - represents color temperature, measured in degrees Kelvin.
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated.
+* **Refresh** - _refresh()_ command for status updates
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - represents current light level, usually 0-100 in percent
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C1 OSRAM Lightify Tunable 60 White with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Other troubleshooting tips are listed as follows:
+* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/204576454-OSRAM-LIGHTIFY-Tunable-White-60-Bulb)

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings", category: "C1") {
 
         capability "Actuator"
         capability "Color Temperature"

smartapps/egid/smart-windows.src/smart-windows.groovy

@@ -1,7 +1,7 @@
 /**
  *  Smart Windows
  *	Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!).
- * 
+ *
  *  Copyright 2014 Eric Gideon
  *
  * 	Based in part on the "When it's going to rain" SmartApp by the SmartThings team,
@@ -21,13 +21,18 @@ definition(
 	name: "Smart Windows",
 	namespace: "egid",
 	author: "Eric Gideon",
-	description: "Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!). If you don't use an external temperature device, your zipcode will be used instead.",
+	description: "Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!). If you don't use an external temperature device, your location will be used instead.",
 	iconUrl: "https://s3.amazonaws.com/smartthings-device-icons/Home/home9-icn.png",
 	iconX2Url: "https://s3.amazonaws.com/smartthings-device-icons/Home/home9-icn@2x.png"
 )
 
 
 preferences {
+
+  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
+		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
+	}
+
 	section( "Set the temperature range for your comfort zone..." ) {
 		input "minTemp", "number", title: "Minimum temperature"
 		input "maxTemp", "number", title: "Maximum temperature"
@@ -39,9 +44,11 @@ preferences {
 		input "inTemp", "capability.temperatureMeasurement", title: "Indoor"
 		input "outTemp", "capability.temperatureMeasurement", title: "Outdoor (optional)", required: false
 	}
-	section( "Set your location" ) {
-		input "zipCode", "text", title: "Zip code"
-	}
+
+	if (location.channelName != 'samsungtv') {
+		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
+  }
+
 	section( "Notifications" ) {
 		input "sendPushMessage", "enum", title: "Send a push notification?", metadata:[values:["Yes","No"]], required:false
 		input "retryPeriod", "number", title: "Minutes between notifications:"
@@ -72,7 +79,7 @@ def temperatureHandler(evt) {
 
 	def currentInTemp = evt.doubleValue
 	def openWindows = sensors.findAll { it?.latestValue("contact") == 'open' }
-	
+
 	log.trace "Temp event: $evt"
 	log.info "In: $currentInTemp; Out: $currentOutTemp"
 
@@ -98,7 +105,7 @@ def temperatureHandler(evt) {
 			if ( currentOutTemp < maxTemp && !openWindows ) {
 				send( "Open some windows to cool down the house! Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )
 			} else if ( currentOutTemp > maxTemp && openWindows ) {
-				send( "It's gotten warmer outside! You should close these windows: ${openWindows.join(', ')}. Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )				
+				send( "It's gotten warmer outside! You should close these windows: ${openWindows.join(', ')}. Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )
 			} else {
 				log.debug "No notifications sent. Everything is in the right place."
 			}
@@ -125,7 +132,11 @@ def temperatureHandler(evt) {
 }
 
 def weatherCheck() {
-	def json = getWeatherFeature("conditions", zipCode)
+	def json 
+	if (location.channelName != 'samsungtv')
+		json = getWeatherFeature("conditions", zipCode)
+	else
+		json = getWeatherFeature("conditions")
 	def currentTemp = json?.current_observation?.temp_f
 
 	if ( currentTemp ) {
@@ -150,4 +161,4 @@ private send(msg) {
 	}
 
 	log.info msg
-}
+}

smartapps/gideon-api/gideon.src/gideon.groovy

@@ -0,0 +1,253 @@
+/**
+ *  Gideon
+ *
+ *  Copyright 2016 Nicola Russo
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Gideon",
+    namespace: "gideon.api",
+    author: "Braindrain Solutions",
+    description: "Gideon AI Smart app allows you to connect and control all of your SmartThings devices through the Gideon AI app, making your SmartThings devices even smarter.",
+    category: "Family",
+    iconUrl: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    iconX2Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    iconX3Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    oauth: [displayName: "Gideon AI API", displayLink: "gideon.ai"])
+
+
+preferences {
+	section("Control these switches...") {
+        input "switches", "capability.switch", multiple:true
+    }
+    section("Control these motion sensors...") {
+        input "motions", "capability.motionSensor", multiple:true
+    }
+    section("Control these presence sensors...") {
+    	input "presence_sensors", "capability.presenceSensor", multiple:true
+    }
+    section("Control these outlets...") {
+    	input "outlets", "capability.switch", multiple:true
+    }
+    section("Control these locks...") {
+    	input "locks", "capability.lock", multiple:true
+    }
+    section("Control these locks...") {
+	    input "temperature_sensors", "capability.temperatureMeasurement"
+    }
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+    subscribe(outlet, "energy", outletHandler)
+  	subscribe(outlet, "switch", outletHandler)
+}
+
+// TODO: implement event handlers
+def outletHandler(evt) {
+	log.debug "$outlet.currentEnergy"
+	//TODO call G API  
+}
+
+
+private device(it, type) {
+	it ? [id: it.id, label: it.label, type: type] : null
+}
+
+//API Mapping
+mappings {
+	path("/getalldevices") {
+    action: [
+      			GET: "getAllDevices"
+    		]
+  	}
+	path("/doorlocks/:id/:command") {
+    action: [
+      GET: "updateDoorLock"
+    ]
+  }
+  	path("/doorlocks/:id") {
+    action: [
+      			GET: "getDoorLockStatus"
+    		]
+  	}
+  	path("/tempsensors/:id") {
+    action: [
+      GET: "getTempSensorsStatus"
+    ]
+  }
+  	path("/presences/:id") {
+    action: [
+      GET: "getPresenceStatus"
+    ]
+  }
+  	path("/motions/:id") {
+    action: [
+      GET: "getMotionStatus"
+    ]
+  }
+  	path("/outlets/:id") {
+    action: [
+      GET: "getOutletStatus"
+    ]
+  }
+  	path("/outlets/:id/:command") {
+    action: [
+      GET: "updateOutlet"
+    ]
+  }
+  	path("/switches/:command") {
+    action: [
+      PUT: "updateSwitch"
+    ]
+  }
+}
+
+//API Methods
+def getAllDevices() {
+	def locks_list = locks.collect{device(it,"Lock")}
+    def presences_list = presence_sensors.collect{device(it,"Presence")}
+    def motions_list = motions.collect{device(it,"Motion")}
+    def outlets_list = outlets.collect{device(it,"Outlet")}
+    def switches_list = switches.collect{device(it,"Switch")}
+    def temp_list = temperature_sensors.collect{device(it,"Temperature")}
+    return [Locks: locks_list, Presences: presences_list, Motions: motions_list, Outlets: outlets_list, Switches: switches_list, Temperatures: temp_list]
+}
+
+//LOCKS
+def getDoorLockStatus() {
+	def device = locks.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('lock')]
+        }
+}
+
+def updateDoorLock() {
+	def command = params.command
+    def device = locks.find { it.id == params.id }
+    if (command){
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            if(command == "toggle")
+            {
+                if(device.currentValue('lock') == "locked")
+                  device.unlock();
+                else
+                  device.lock();
+                  
+                return [Device_id: params.id, result_action: "200"]
+            }
+        }
+    }
+}
+
+//PRESENCE
+def getPresenceStatus() {
+
+	def device = presence_sensors.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('presence')]
+   }
+}
+
+//MOTION
+def getMotionStatus() {
+
+	def device = motions.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('motion')]
+   }
+}
+
+//OUTLET
+def getOutletStatus() {
+	
+    def device = outlets.find { it.id == params.id }
+   	if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentSwitch, Current_watt: device.currentValue("energy")]
+  }
+}
+
+def updateOutlet() {
+	
+    def command = params.command
+    def device = outlets.find { it.id == params.id }
+    if (command){
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            if(command == "toggle")
+            {
+                if(device.currentSwitch == "on")
+                  device.off();
+                else
+                  device.on();
+                  
+                return [Device_id: params.id, result_action: "200"]
+            }
+        }
+    }
+}                
+
+//SWITCH
+def updateSwitch() {
+    def command = params.command
+    def device = switches.find { it.id == params.id }
+    if (command){
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            if(command == "toggle")
+            {
+                if(device.currentSwitch == "on")
+                  device.off();
+                else
+                  device.on();
+                  
+                return [Device_id: params.id, result_action: "200"]
+            }
+        }
+    }
+}
+
+//TEMPERATURE
+def getTempSensorsStatus() {
+	
+    def device = temperature_sensors.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('temperature')]
+   }
+}

smartapps/imbrianj/ready-for-rain.src/ready-for-rain.groovy

@@ -18,8 +18,13 @@ definition(
 )
 
 preferences {
-  section("Zip code?") {
-    input "zipcode", "text", title: "Zipcode?"
+
+  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
+		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
+	}
+
+  if (location.channelName != 'samsungtv') {
+		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
   }
 
   section("Things to check?") {
@@ -60,7 +65,11 @@ def scheduleCheck(evt) {
   // Only need to poll if we haven't checked in a while - and if something is left open.
   if((now() - (30 * 60 * 1000) > state.lastCheck["time"]) && open) {
     log.info("Something's open - let's check the weather.")
-    def response = getWeatherFeature("forecast", zipcode)
+    def response
+    if (location.channelName != 'samsungtv')
+      response = getWeatherFeature("forecast", zipCode)
+    else
+      response = getWeatherFeature("forecast")
     def weather  = isStormy(response)
 
     if(weather) {

smartapps/juano2310/jawbone-up-connect.src/jawbone-up-connect.groovy

@@ -4,6 +4,9 @@
  *  Author: Juan Risso
  *  Date: 2013-12-19
  */
+
+include 'asynchttp_v1'
+
 definition(
 	name: "Jawbone UP (Connect)",
 	namespace: "juano2310",
@@ -303,7 +306,8 @@ def setup() {
 			  	def childDevice = addChildDevice('juano2310', "Jawbone User", "${app.id}.${member.xid}",null,[name:"Jawbone UP - " + member.first, completedSetup: true])
 			    if (childDevice) {
 			       	log.debug "Child Device Successfully Created"
-			        generateInitialEvent (member, childDevice)
+			        childDevice?.generateSleepingEvent(false)
+                    pollChild(childDevice)
 			    }
 			}
 		}
@@ -349,67 +353,67 @@ def uninstalled() {
 }
 
 def pollChild(childDevice) {
-    def member = state.member
-    generatePollingEvents (member, childDevice)
+		def childMap = [ value: "$childDevice.device.deviceNetworkId}"]
+
+		def params = [
+				uri: 'https://jawbone.com',
+				path: '/nudge/api/users/@me/goals',
+				headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],
+				contentType: 'application/json'
+		]
+
+		asynchttp_v1.get('responseGoals', params, childMap)
+
+		def params2 = [
+				uri: 'https://jawbone.com',
+				path: '/nudge/api/users/@me/moves',
+				headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],
+				contentType: 'application/json'
+		]
+
+		asynchttp_v1.get('responseMoves', params2, childMap)
 }
 
-def generatePollingEvents (member, childDevice) {
-    // lets figure out if the member is currently "home" (At the place)
-    def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals"
-    def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"
-    def urlsleeps = "https://jawbone.com/nudge/api/users/@me/sleeps"
-    def goals = null
-    def moves = null
- 	def sleeps = null
-    httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
-        goals = response.data.data
-    }
-    httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
-        moves = response.data.data.items[0]
-    }
-
-    try { // we are going to just ignore any errors
-        log.debug "Member = ${member.first}"
-        log.debug "Moves Goal = ${goals.move_steps} Steps"
-        log.debug "Moves = ${moves.details.steps} Steps"
-
-        childDevice?.sendEvent(name:"steps", value: moves.details.steps)
-        childDevice?.sendEvent(name:"goal", value: goals.move_steps)
-    	//setColor(moves.details.steps,goals.move_steps,childDevice)
-    }
-    catch (e) {
-            // eat it
-    }
+def responseGoals(response, dni) {
+	if (response.hasError()) {
+			log.error "response has error: $response.errorMessage"
+	} else {
+			def goals
+			try {
+					// json response already parsed into JSONElement object
+					goals = response.json.data
+			} catch (e) {
+					log.error "error parsing json from response: $e"
+			}
+			if (goals) {
+				def childDevice = getChildDevice(dni.value)
+				log.debug "Goal = ${goals.move_steps} Steps"
+				childDevice?.sendEvent(name:"goal", value: goals.move_steps)
+			} else {
+					log.debug "did not get json results from response body: $response.data"
+			}
+	}
 }
 
-def generateInitialEvent (member, childDevice) {
-    // lets figure out if the member is currently "home" (At the place)
-    def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals"
-    def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"
-    def urlsleeps = "https://jawbone.com/nudge/api/users/@me/sleeps"
-    def goals = null
-    def moves = null
- 	def sleeps = null
-    httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
-        goals = response.data.data
-    }
-    httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
-        moves = response.data.data.items[0]
-    }
-
-    try { // we are going to just ignore any errors
-        log.debug "Member = ${member.first}"
-        log.debug "Moves Goal = ${goals.move_steps} Steps"
-        log.debug "Moves = ${moves.details.steps} Steps"
-        log.debug "Sleeping state = false"
-        childDevice?.generateSleepingEvent(false)
-        childDevice?.sendEvent(name:"steps", value: moves.details.steps)
-        childDevice?.sendEvent(name:"goal", value: goals.move_steps)
-    	//setColor(moves.details.steps,goals.move_steps,childDevice)
-    }
-    catch (e) {
-            // eat it
-    }
+def responseMoves(response, dni) {
+	if (response.hasError()) {
+			log.error "response has error: $response.errorMessage"
+	} else {
+			def moves
+			try {
+					// json response already parsed into JSONElement object
+					moves = response.json.data.items[0]
+			} catch (e) {
+					log.error "error parsing json from response: $e"
+			}
+			if (moves) {
+				def childDevice = getChildDevice(dni.value)
+				log.debug "Moves = ${moves.details.steps} Steps"
+				childDevice?.sendEvent(name:"steps", value: moves.details.steps)
+			} else {
+					log.debug "did not get json results from response body: $response.data"
+			}
+	}
 }
 
 def setColor (steps,goal,childDevice) {
@@ -433,7 +437,7 @@ def hookEventHandler() {
     // get some stuff we need
     def userId = json.events.user_xid[0]
     def	json_type = json.events.type[0]
-	def json_action = json.events.action[0]
+	  def json_action = json.events.action[0]
 
     //log.debug json
     log.debug "Userid = ${userId}"

smartapps/smartthings/severe-weather-alert.src/severe-weather-alert.groovy

@@ -26,17 +26,22 @@ definition(
 )
 
 preferences {
-	section ("In addition to push notifications, send text alerts to...") {
-        input("recipients", "contact", title: "Send notifications to") {
-            input "phone1", "phone", title: "Phone Number 1", required: false
-            input "phone2", "phone", title: "Phone Number 2", required: false
-            input "phone3", "phone", title: "Phone Number 3", required: false
-        }
+
+  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
+		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
 	}
 
-	section ("Zip code (optional, defaults to location coordinates)...") {
-		input "zipcode", "text", title: "Zip Code", required: false
-	}
+  if (location.channelName != 'samsungtv') {
+		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
+  }
+
+	section ("In addition to push notifications, send text alerts to...") {
+      input("recipients", "contact", title: "Send notifications to") {
+          input "phone1", "phone", title: "Phone Number 1", required: false
+          input "phone2", "phone", title: "Phone Number 2", required: false
+          input "phone3", "phone", title: "Phone Number 3", required: false
+      }
+	 }
 }
 
 def installed() {
@@ -61,7 +66,7 @@ def checkForSevereWeather() {
 	def alerts
 	if(locationIsDefined()) {
 		if(zipcodeIsValid()) {
-			alerts = getWeatherFeature("alerts", zipcode)?.alerts
+			alerts = getWeatherFeature("alerts", zipCode)?.alerts
 		} else {
 			log.warn "Severe Weather Alert: Invalid zipcode entered, defaulting to location's zipcode"
 			alerts = getWeatherFeature("alerts")?.alerts