MSA-1518: Foscam Unaltered

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -127,10 +127,9 @@ def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelR
 	def map = [ displayed: true ]
     switch (cmd.sensorType) {
     	case 1:
-			def cmdScale = cmd.scale == 1 ? "F" : "C"
-			map.name = "temperature"
-            map.unit = getTemperatureScale()
-            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+        	map.name = "temperature"
+            map.unit = cmd.scale == 1 ? "F" : "C"
+            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, map.unit, cmd.precision)
             break
     	case 3:
         	map.name = "illuminance"

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -93,7 +93,7 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
 def healthPoll() {
@@ -105,7 +105,9 @@ def healthPoll() {
 def configure() {
     unschedule()
     runEvery5Minutes("healthPoll")
+    log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
     sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
+    // minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -148,12 +148,14 @@ def generateEvent(Map results) {
 						 handlerName: name]
 
 			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint" ) {
-				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
+				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
 				isChange = isTemperatureStateChange(device, name, value.toString())
 				isDisplayed = isChange
 				event << [value: sendValue, unit: temperatureScale, isStateChange: isChange, displayed: isDisplayed]
 			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
-				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
+				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
 				event << [value: sendValue, unit: temperatureScale, displayed: false]
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
 				isChange = isStateChange(device, name, value.toString())
@@ -251,6 +253,7 @@ void setCoolingSetpoint(setpoint) {
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
+
 	if (coolingSetpoint > maxCoolingSetpoint) {
 		coolingSetpoint = maxCoolingSetpoint
 	} else if (coolingSetpoint < minCoolingSetpoint) {
@@ -280,6 +283,7 @@ void setCoolingSetpoint(setpoint) {
 }
 
 void resumeProgram() {
+
 	log.debug "resumeProgram() is called"
 	sendEvent("name":"thermostatStatus", "value":"resuming schedule", "description":statusText, displayed: false)
 	def deviceId = device.deviceNetworkId.split(/\./).last()
@@ -350,6 +354,7 @@ def switchFanMode() {
 }
 
 def switchToFanMode(nextMode) {
+
 	log.debug "switching to fan mode: $nextMode"
 	def returnCommand
 
@@ -515,56 +520,63 @@ def fanAuto() {
 }
 
 def generateSetpointEvent() {
+
 	log.debug "Generate SetPoint Event"
 
 	def mode = device.currentValue("thermostatMode")
+	log.debug "Current Mode = ${mode}"
 
 	def heatingSetpoint = device.currentValue("heatingSetpoint")
+	log.debug "Heating Setpoint = ${heatingSetpoint}"
+
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
+	log.debug "Cooling Setpoint = ${coolingSetpoint}"
+
 	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
-	if(location.temperatureScale == "C") {
-		maxHeatingSetpoint = maxHeatingSetpoint > 40 ? roundC(convertFtoC(maxHeatingSetpoint)) : roundC(maxHeatingSetpoint)
-		maxCoolingSetpoint = maxCoolingSetpoint > 40 ? roundC(convertFtoC(maxCoolingSetpoint)) : roundC(maxCoolingSetpoint)
-		minHeatingSetpoint = minHeatingSetpoint > 40 ? roundC(convertFtoC(minHeatingSetpoint)) : roundC(minHeatingSetpoint)
-		minCoolingSetpoint = minCoolingSetpoint > 40 ? roundC(convertFtoC(minCoolingSetpoint)) : roundC(minCoolingSetpoint)
-		heatingSetpoint = heatingSetpoint > 40 ? roundC(convertFtoC(heatingSetpoint)) : roundC(heatingSetpoint)
-		coolingSetpoint = coolingSetpoint > 40 ? roundC(convertFtoC(coolingSetpoint)) : roundC(coolingSetpoint)
-	} else {
-		maxHeatingSetpoint = maxHeatingSetpoint < 40 ? roundC(convertCtoF(maxHeatingSetpoint)) : maxHeatingSetpoint
-		maxCoolingSetpoint = maxCoolingSetpoint < 40 ? roundC(convertCtoF(maxCoolingSetpoint)) : maxCoolingSetpoint
-		minHeatingSetpoint = minHeatingSetpoint < 40 ? roundC(convertCtoF(minHeatingSetpoint)) : minHeatingSetpoint
-		minCoolingSetpoint = minCoolingSetpoint < 40 ? roundC(convertCtoF(minCoolingSetpoint)) : minCoolingSetpoint
-		heatingSetpoint = heatingSetpoint < 40 ? roundC(convertCtoF(heatingSetpoint)) : heatingSetpoint
-		coolingSetpoint = coolingSetpoint < 40 ? roundC(convertCtoF(coolingSetpoint)) : coolingSetpoint
+	if(location.temperatureScale == "C")
+	{
+		maxHeatingSetpoint = roundC(maxHeatingSetpoint)
+		maxCoolingSetpoint = roundC(maxCoolingSetpoint)
+		minHeatingSetpoint = roundC(minHeatingSetpoint)
+		minCoolingSetpoint = roundC(minCoolingSetpoint)
+		heatingSetpoint = roundC(heatingSetpoint)
+		coolingSetpoint = roundC(coolingSetpoint)
 	}
 
-	log.debug "Current Mode = ${mode}"
-	log.debug "Heating Setpoint = ${heatingSetpoint}"
-	log.debug "Cooling Setpoint = ${coolingSetpoint}"
 
 	sendEvent("name":"maxHeatingSetpoint", "value":maxHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"maxCoolingSetpoint", "value":maxCoolingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minHeatingSetpoint", "value":minHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minCoolingSetpoint", "value":minCoolingSetpoint, "unit":location.temperatureScale)
-	sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
-	sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
+
 
 	if (mode == "heat") {
+
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+
 	}
 	else if (mode == "cool") {
+
 		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
+
 	} else if (mode == "auto") {
+
 		sendEvent("name":"thermostatSetpoint", "value":"Auto")
+
 	} else if (mode == "off") {
+
 		sendEvent("name":"thermostatSetpoint", "value":"Off")
+
 	} else if (mode == "auxHeatOnly") {
+
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+
 	}
+
 }
 
 void raiseSetpoint() {
@@ -573,31 +585,21 @@ void raiseSetpoint() {
 	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 
+
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow raiseSetpoint"
 	} else {
-
 		def heatingSetpoint = device.currentValue("heatingSetpoint")
 		def coolingSetpoint = device.currentValue("coolingSetpoint")
 		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
-
-		if (location.temperatureScale == "C") {
-			maxHeatingSetpoint = maxHeatingSetpoint > 40 ? convertFtoC(maxHeatingSetpoint) : maxHeatingSetpoint
-			maxCoolingSetpoint = maxCoolingSetpoint > 40 ? convertFtoC(maxCoolingSetpoint) : maxCoolingSetpoint
-			heatingSetpoint = heatingSetpoint > 40 ? convertFtoC(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint > 40 ? convertFtoC(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint > 40 ? convertFtoC(thermostatSetpoint) : thermostatSetpoint
-		} else {
-			maxHeatingSetpoint = maxHeatingSetpoint < 40 ? convertCtoF(maxHeatingSetpoint) : maxHeatingSetpoint
-			maxCoolingSetpoint = maxCoolingSetpoint < 40 ? convertCtoF(maxCoolingSetpoint) : maxCoolingSetpoint
-			heatingSetpoint = heatingSetpoint < 40 ? convertCtoF(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint < 40 ? convertCtoF(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint < 40 ? convertCtoF(thermostatSetpoint) : thermostatSetpoint
-		}
-
 		log.debug "raiseSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
 
-		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
+		if (device.latestState('thermostatSetpoint')) {
+			targetvalue = device.latestState('thermostatSetpoint').value
+			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
+		} else {
+			targetvalue = 0
+		}
 		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
 		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue > maxHeatingSetpoint) {
@@ -620,29 +622,20 @@ void lowerSetpoint() {
 	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
+
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow lowerSetpoint"
 	} else {
 		def heatingSetpoint = device.currentValue("heatingSetpoint")
 		def coolingSetpoint = device.currentValue("coolingSetpoint")
 		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
-
-		if (location.temperatureScale == "C") {
-			minHeatingSetpoint = minHeatingSetpoint > 40 ? convertFtoC(minHeatingSetpoint) : minHeatingSetpoint
-			minCoolingSetpoint = minCoolingSetpoint > 40 ? convertFtoC(minCoolingSetpoint) : minCoolingSetpoint
-			heatingSetpoint = heatingSetpoint > 40 ? convertFtoC(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint > 40 ? convertFtoC(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint > 40 ? convertFtoC(thermostatSetpoint) : thermostatSetpoint
-		} else {
-			minHeatingSetpoint = minHeatingSetpoint < 40 ? convertCtoF(minHeatingSetpoint) : minHeatingSetpoint
-			minCoolingSetpoint = minCoolingSetpoint < 40 ? convertCtoF(minCoolingSetpoint) : minCoolingSetpoint
-			heatingSetpoint = heatingSetpoint < 40 ? convertCtoF(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint < 40 ? convertCtoF(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint < 40 ? convertCtoF(thermostatSetpoint) : thermostatSetpoint
-		}
 		log.debug "lowerSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
-
-		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
+		if (device.latestState('thermostatSetpoint')) {
+			targetvalue = device.latestState('thermostatSetpoint').value
+			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
+		} else {
+			targetvalue = 0
+		}
 		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
 		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue < minHeatingSetpoint) {
@@ -660,6 +653,7 @@ void lowerSetpoint() {
 
 //called by raiseSetpoint() and lowerSetpoint()
 void alterSetpoint(temp) {
+
 	def mode = device.currentValue("thermostatMode")
 
 	if (mode == "off" || mode == "auto") {
@@ -672,18 +666,6 @@ void alterSetpoint(temp) {
 		def targetHeatingSetpoint
 		def targetCoolingSetpoint
 
-		def temperatureScaleHasChanged = false
-
-		if (location.temperatureScale == "C") {
-			if ( heatingSetpoint > 40.0 || coolingSetpoint > 40.0 ) {
-				temperatureScaleHasChanged = true
-			}
-		} else {
-			if ( heatingSetpoint < 40.0 || coolingSetpoint < 40.0 ) {
-				temperatureScaleHasChanged = true
-			}
-		}
-
 		//step1: check thermostatMode, enforce limits before sending request to cloud
 		if (mode == "heat" || mode == "auxHeatOnly"){
 			if (temp.value > coolingSetpoint){
@@ -725,18 +707,17 @@ void alterSetpoint(temp) {
 				sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
 			}
 		}
-
-		if ( temperatureScaleHasChanged )
-			generateSetpointEvent()
 		generateStatusEvent()
 	}
 }
 
 def generateStatusEvent() {
+
 	def mode = device.currentValue("thermostatMode")
 	def heatingSetpoint = device.currentValue("heatingSetpoint")
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
 	def temperature = device.currentValue("temperature")
+
 	def statusText
 
 	log.debug "Generate Status Event for Mode = ${mode}"
@@ -746,25 +727,36 @@ def generateStatusEvent() {
 	log.debug "HVAC Mode = ${mode}"
 
 	if (mode == "heat") {
+
 		if (temperature >= heatingSetpoint)
 			statusText = "Right Now: Idle"
 		else
 			statusText = "Heating to ${heatingSetpoint} ${location.temperatureScale}"
+
 	} else if (mode == "cool") {
+
 		if (temperature <= coolingSetpoint)
 			statusText = "Right Now: Idle"
 		else
 			statusText = "Cooling to ${coolingSetpoint} ${location.temperatureScale}"
-	} else if (mode == "auto") {
-		statusText = "Right Now: Auto"
-	} else if (mode == "off") {
-		statusText = "Right Now: Off"
-	} else if (mode == "auxHeatOnly") {
-		statusText = "Emergency Heat"
-	} else {
-		statusText = "?"
-	}
 
+	} else if (mode == "auto") {
+
+		statusText = "Right Now: Auto"
+
+	} else if (mode == "off") {
+
+		statusText = "Right Now: Off"
+
+	} else if (mode == "auxHeatOnly") {
+
+		statusText = "Emergency Heat"
+
+	} else {
+
+		statusText = "?"
+
+	}
 	log.debug "Generate Status Event = ${statusText}"
 	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
 }
@@ -778,7 +770,7 @@ def roundC (tempC) {
 }
 
 def convertFtoC (tempF) {
-	return ((Math.round(((tempF - 32)*(5/9)) * 2))/2).toDouble()
+	return String.format("%.1f", (Math.round(((tempF - 32)*(5/9)) * 2))/2)
 }
 
 def convertCtoF (tempC) {

devicetypes/smartthings/foscam.src/foscam.groovy

@@ -189,4 +189,4 @@ private calcDigestAuth(String method, String uri) {
 	def response = hashMD5("${HA1}::::auth:${HA2}")
 
 	'Digest username="'+ getUsername() + '", realm="", nonce="", uri="'+ uri +'", qop=auth, nc=, cnonce="", response="' + response + '", opaque=""'
-}
+}

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,7 +57,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes
@@ -172,3 +172,6 @@ def verifyPercent(percent) {
     }
 }
 
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -45,7 +45,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes
@@ -87,3 +87,6 @@ def parse(description) {
 	results
 }
 
+def ping() {
+	log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,7 +66,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes
@@ -188,3 +188,6 @@ def verifyPercent(percent) {
     }
 }
 
+def ping() {
+    log.trace "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,7 +50,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes
@@ -93,3 +93,6 @@ void refresh() {
 	parent.manualRefresh()
 }
 
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,7 +55,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes
@@ -107,3 +107,6 @@ void refresh() {
     parent.manualRefresh()
 }
 
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -141,6 +141,7 @@ def setLevel(percentage) {
 		percentage = 1 // clamp to 1%
 	}
 	if (percentage == 0) {
+		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -71,6 +71,7 @@ def setLevel(percentage) {
 		percentage = 1 // clamp to 1%
 	}
 	if (percentage == 0) {
+		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
@@ -142,7 +143,7 @@ def poll() {
 	sendEvent(name: "model", value: data.product.name)
 
 	return []
-	}
+}
 
 def refresh() {
 	log.debug "Executing 'refresh'"

devicetypes/smartthings/osram-lightify-gardenspot-mini-rgb.src/osram-lightify-gardenspot-mini-rgb.groovy

@@ -21,6 +21,9 @@ metadata {
         attribute "colorName", "string"
 
         command "setAdjustedColor"
+
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB"
     }
 
     // simulator metadata

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -133,7 +133,7 @@ def refresh() {
 }
 
 def configure() {
-	refresh() + onOffConfig() + levelConfig() + powerConfig()
+	onOffConfig() + levelConfig() + powerConfig() + refresh()
 }
 
 

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -104,21 +104,8 @@ def parse(String description) {
 		}
 	}
 	else {
-		def cluster = zigbee.parse(description)
-
-		if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07){
-			if (cluster.data[0] == 0x00) {
-				log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-				sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-			}
-			else {
-				log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-			}
-		}
-		else {
-			log.warn "DID NOT PARSE MESSAGE for description : $description"
-			log.debug "${cluster}"
-		}
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug zigbee.parseDescriptionAsMap(description)
 	}
 }
 
@@ -141,12 +128,10 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	refresh() + zigbee.onOffConfig(0, 300) + powerConfig()
+	zigbee.onOffConfig(0, 300) + powerConfig() + refresh()
 }
 
 //power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -118,28 +118,14 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+				resultMap = getBatteryResult(cluster.data.last())
 				break
 
             case 0x0402:
-				if (cluster.command == 0x07) {
-					if (cluster.data[0] == 0x00){
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
                 break
         }
     }
@@ -149,8 +135,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
 		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -304,13 +292,19 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	def enrollCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+	]
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
+	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -122,37 +122,19 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+				resultMap = getBatteryResult(cluster.data.last())
 				break
 
 			case 0x0402:
-				if (cluster.command == 0x07) {
-					if (cluster.data[0] == 0x00) {
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
 				break
 
 			case 0x0406:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					log.debug 'motion'
-					resultMap.name = 'motion'
-				}
+				log.debug 'motion'
+				resultMap.name = 'motion'
 				break
 		}
 	}
@@ -162,8 +144,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
 		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -319,13 +303,19 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+
+	def enrollCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+	]
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
+	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -255,9 +255,13 @@ def refresh() {
 }
 
 def configure() {
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 
 	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
 		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
@@ -266,7 +270,7 @@ def configure() {
 		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
-    return refresh() + configCmds  // send refresh cmds as part of config
+    return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -147,33 +147,20 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+			resultMap = getBatteryResult(cluster.data.last())
 			break
 
 			case 0xFC02:
-				log.debug 'ACCELERATION'
+			log.debug 'ACCELERATION'
 			break
 
 			case 0x0402:
-				if (cluster.command == 0x07) {
-					if(cluster.data[0] == 0x00) {
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
-			break
+			log.debug 'TEMP'
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
+				break
 		}
 	}
 
@@ -182,8 +169,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 	cluster.command == 0x0B ||
+	cluster.command == 0x07 ||
 	(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -412,22 +401,22 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting"
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	def configCmds = zigbee.batteryConfig() +
+	def configCmds = enrollResponse() +
+			zigbee.batteryConfig() +
 			zigbee.temperatureConfig(30, 300) +
 			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
 
-	return refresh() + configCmds
+	return configCmds + refresh()
 }
 
 private getEndpointId() {

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -277,8 +277,12 @@ def getTemperature(value) {
 def configure() {
 	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
 		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
@@ -291,7 +295,7 @@ def configure() {
 		"zcl global send-me-a-report 0xFC02 2 0x18 30 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
-	return refresh() + configCmds // send refresh cmds as part of config
+	return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -109,28 +109,15 @@ private Map parseCatchAllMessage(String description) {
     if (shouldProcessMessage(cluster)) {
         switch(cluster.clusterId) {
             case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+            	resultMap = getBatteryResult(cluster.data.last())
                 break
 
             case 0x0402:
-				if (cluster.command == 0x07){
-					if (cluster.data[0] == 0x00) {
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
+                log.debug 'TEMP'
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
                 break
         }
     }
@@ -140,8 +127,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
+    // 0x07 is bind message
     boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
@@ -266,15 +255,19 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	def enrollCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+	]
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-    return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
+    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -93,37 +93,20 @@ private Map parseCatchAllMessage(String description) {
     if (shouldProcessMessage(cluster)) {
         switch(cluster.clusterId) {
             case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+            	resultMap = getBatteryResult(cluster.data.last())
                 break
 
             case 0x0402:
-				if (cluster.command == 0x07) {
-					if (cluster.data[0] == 0x00){
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
-				break
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
 
 			case 0xFC45:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					String pctStr = cluster.data[-1, -2].collect { Integer.toHexString(it) }.join('')
-					String display = Math.round(Integer.valueOf(pctStr, 16) / 100)
-					resultMap = getHumidityResult(display)
-				}
+                String pctStr = cluster.data[-1, -2].collect { Integer.toHexString(it) }.join('')
+                String display = Math.round(Integer.valueOf(pctStr, 16) / 100)
+                resultMap = getHumidityResult(display)
                 break
         }
     }
@@ -133,8 +116,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
+    // 0x07 is bind message
     boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
@@ -250,7 +235,11 @@ private Map getTemperatureResult(value) {
 
 private Map getHumidityResult(value) {
 	log.debug 'Humidity'
-	return value ? [name: 'humidity', value: value, unit: '%'] : [:]
+	return [
+		name: 'humidity',
+		value: value,
+		unit: '%'
+	]
 }
 
 /**
@@ -263,15 +252,20 @@ def ping() {
 def refresh()
 {
 	log.debug "refresh temperature, humidity, and battery"
-	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
-			zigbee.readAttribute(0x0402, 0x0000) +
-			zigbee.readAttribute(0x0001, 0x0020)
+	[
+
+		"zcl mfg-code 0xC2DF", "delay 1000",
+		"zcl global read 0xFC45 0", "delay 1000",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 1000",
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+        "st rattr 0x${device.deviceNetworkId} 1 1 0x20"
+
+	]
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting and Bindings."
 	def humidityConfigCmds = [
@@ -282,7 +276,7 @@ def configure() {
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300)  // send refresh cmds as part of config
+	return humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) +  refresh() // send refresh cmds as part of config
 }
 
 private hex(value) {

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -89,8 +89,14 @@ def parse(String description) {
 }
 
 private Map parseIasButtonMessage(String description) {
-    def zs = zigbee.parseZoneStatus(description)
-    return zs.isAlarm2Set() ? getButtonResult("press") : getButtonResult("release")
+    int zoneInt = Integer.parseInt((description - "zone status 0x"), 16)
+    if (zoneInt & 0x02) {
+        resultMap = getButtonResult('press')
+    } else {
+        resultMap = getButtonResult('release')
+    }
+
+    return resultMap
 }
 
 private Map getBatteryResult(rawValue) {

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -93,5 +93,5 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    refresh()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh()
 }

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -60,21 +60,8 @@ def parse(String description) {
         }
     }
     else {
-        def cluster = zigbee.parse(description)
-
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
-        }
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
     }
 }
 
@@ -97,15 +84,13 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -90,7 +90,7 @@ def configure() {
         zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING,
                                   TYPE_U8, 600, 21600, 0x01)
     log.info "configure() --- cmds: $cmds"
-    return refresh() + cmds // send refresh cmds as part of config
+    return cmds + refresh() // send refresh cmds as part of config
 }
 
 def refresh() {

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -1,154 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Author: SmartThings
- *  Date: 2016-01-19
- *
- *  This DTH should serve as the generic DTH to handle RGB ZigBee HA devices (For color bulbs with no color temperature)
- */
-
-metadata {
-	definition (name: "ZigBee RGB Bulb", namespace: "smartthings", author: "SmartThings") {
-
-		capability "Actuator"
-		capability "Color Control"
-		capability "Configuration"
-		capability "Polling"
-		capability "Refresh"
-		capability "Switch"
-		capability "Switch Level"
-		capability "Health Check"
-
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
-	}
-
-	// UI tile definitions
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-			tileAttribute ("device.color", key: "COLOR_CONTROL") {
-				attributeState "color", action:"color control.setColor"
-			}
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main(["switch"])
-		details(["switch", "refresh"])
-	}
-}
-
-//Globals
-private getATTRIBUTE_HUE() { 0x0000 }
-private getATTRIBUTE_SATURATION() { 0x0001 }
-private getHUE_COMMAND() { 0x00 }
-private getSATURATION_COMMAND() { 0x03 }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	log.debug "description is $description"
-
-	def event = zigbee.getEvent(description)
-	if (event) {
-		log.debug event
-		if (event.name=="level" && event.value==0) {}
-		else {
-			sendEvent(event)
-		}
-	}
-	else {
-		def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-		def cluster = zigbee.parse(description)
-
-		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
-			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-				sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
-			}
-			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-				sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
-			}
-		}
-		else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-			if (cluster.data[0] == 0x00){
-				log.debug "ON/OFF REPORTING CONFIG RESPONSE: $cluster"
-				sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-			}
-			else {
-				log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-			}
-		}
-		else {
-			log.info "DID NOT PARSE MESSAGE for description : $description"
-			log.debug zigbeeMap
-		}
-	}
-}
-
-def on() {
-	zigbee.on()
-}
-
-def off() {
-	zigbee.off()
-}
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.onOffRefresh()
-}
-
-def refresh() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
-}
-
-def configure() {
-	log.debug "Configuring Reporting and Bindings."
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
-	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
-}
-
-def setLevel(value) {
-	zigbee.setLevel(value)
-}
-
-def setColor(value){
-	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + "delay 500" + setSaturation(value.saturation)
-}
-
-def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
-}
-
-def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
-}

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -95,7 +95,7 @@ def parse(String description) {
     }
     else {
         def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-        def cluster = zigbee.parse(description)
+        log.trace "zigbeeMap : $zigbeeMap"
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
@@ -107,18 +107,8 @@ def parse(String description) {
                 sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
             }
         }
-        else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00){
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
         else {
             log.info "DID NOT PARSE MESSAGE for description : $description"
-            log.debug zigbeeMap
         }
     }
 }
@@ -138,17 +128,15 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+    zigbee.onOffRefresh() + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh()
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
@@ -189,5 +177,5 @@ def setHue(value) {
 
 def setSaturation(value) {
     def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
 }

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -82,5 +82,5 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    refresh()
+    zigbee.onOffConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig() + zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh()
 }

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -78,5 +78,5 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffRefresh() + zigbee.onOffConfig()
+    zigbee.onOffConfig() + zigbee.onOffRefresh()
 }

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -134,5 +134,10 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    refresh()
+    zigbee.onOffConfig() +
+    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
+    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1) +
+    zigbee.onOffRefresh() +
+    zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
+    zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING)
 }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -83,21 +83,8 @@ def parse(String description) {
         }
     }
     else {
-        def cluster = zigbee.parse(description)
-
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
-        }
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
     }
 }
 
@@ -121,17 +108,15 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh()
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
 def setColorTemperature(value) {

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -1,134 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-metadata {
-	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings") {
-
-		capability "Actuator"
-		capability "Color Control"
-		capability "Configuration"
-		capability "Polling"
-		capability "Refresh"
-		capability "Switch"
-		capability "Switch Level"
-	}
-
-	// UI tile definitions
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-			tileAttribute ("device.color", key: "COLOR_CONTROL") {
-				attributeState "color", action:"color control.setColor"
-			}
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main(["switch"])
-		details(["switch", "refresh"])
-	}
-}
-
-//Globals
-private getATTRIBUTE_HUE() { 0x0000 }
-private getATTRIBUTE_SATURATION() { 0x0001 }
-private getHUE_COMMAND() { 0x00 }
-private getSATURATION_COMMAND() { 0x03 }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	log.debug "description is $description"
-
-	def finalResult = zigbee.getEvent(description)
-	if (finalResult) {
-		log.debug finalResult
-		sendEvent(finalResult)
-	}
-	else {
-		def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-		log.trace "zigbeeMap : $zigbeeMap"
-
-		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
-			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
-				sendEvent(name: "hue", value: hueValue, displayed:false)
-			}
-			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-				sendEvent(name: "saturation", value: saturationValue, displayed:false)
-			}
-		}
-		else {
-			log.info "DID NOT PARSE MESSAGE for description : $description"
-		}
-	}
-}
-
-def on() {
-	zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def off() {
-	zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def refresh() {
-	refreshAttributes() + configureAttributes()
-}
-
-def poll() {
-	refreshAttributes()
-}
-
-def configure() {
-	log.debug "Configuring Reporting and Bindings."
-	configureAttributes() + refreshAttributes()
-}
-
-def configureAttributes() {
-	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
-}
-
-def refreshAttributes() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
-}
-
-def setLevel(value) {
-	zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
-}
-
-def setColor(value){
-	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
-}
-
-def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)      //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
-}
-
-def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
-}

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -123,7 +123,7 @@ def configureAttributes() {
 }
 
 def refreshAttributes() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
@@ -141,10 +141,10 @@ def setColor(value){
 
 def setHue(value) {
     def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
 }
 
 def setSaturation(value) {
     def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
 }

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -8,7 +8,7 @@
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
  *
- *  http://www.apache.org/licenses/LICENSE-2.0
+ *      http://www.apache.org/licenses/LICENSE-2.0
  *
  *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
@@ -24,7 +24,7 @@ definition(
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
-	singleInstance: true
+    singleInstance: true
 )
 
 preferences {
@@ -37,10 +37,7 @@ preferences {
 
 def mainPage() {
 	def bridges = bridgesDiscovered()
-
-	if (state.refreshUsernameNeeded) {
-		return bridgeLinking()
-	} else if (state.username && bridges) {
+	if (state.username && bridges) {
 		return bulbDiscovery()
 	} else {
 		return bridgeDiscovery()
@@ -105,22 +102,13 @@ def bridgeLinking() {
 
 	def nextPage = ""
 	def title = "Linking with your Hue"
-	def paragraphText
+    def paragraphText
 	if (selectedHue) {
-		if (state.refreshUsernameNeeded) {
-			paragraphText = "The current Hue username is invalid.\n\nPlease press the button on your Hue Bridge to re-link. "
-		} else {
-			paragraphText = "Press the button on your Hue Bridge to setup a link. "
-		}
-	} else {
-		paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
-	}
+		paragraphText = "Press the button on your Hue Bridge to setup a link. "
+    } else {
+    	paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
+    }
 	if (state.username) { //if discovery worked
-		if (state.refreshUsernameNeeded) {
-			state.refreshUsernameNeeded = false
-			// Issue one poll with new username to cancel local polling with old username
-			poll()
-		}
 		nextPage = "bulbDiscovery"
 		title = "Success!"
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
@@ -198,7 +186,7 @@ void ssdpSubscribe() {
 
 private sendDeveloperReq() {
 	def token = app.id
-	def host = getBridgeIP()
+    def host = getBridgeIP()
 	sendHubCommand(new physicalgraph.device.HubAction([
 		method: "POST",
 		path: "/api",
@@ -209,7 +197,7 @@ private sendDeveloperReq() {
 }
 
 private discoverHueBulbs() {
-	def host = getBridgeIP()
+    def host = getBridgeIP()
 	sendHubCommand(new physicalgraph.device.HubAction([
 		method: "GET",
 		path: "/api/${state.username}/lights",
@@ -231,8 +219,8 @@ private verifyHueBridge(String deviceNetworkId, String host) {
 private verifyHueBridges() {
 	def devices = getHueBridges().findAll { it?.value?.verified != true }
 	devices.each {
-		def ip = convertHexToIP(it.value.networkAddress)
-		def port = convertHexToInt(it.value.deviceAddress)
+        def ip = convertHexToIP(it.value.networkAddress)
+        def port = convertHexToInt(it.value.deviceAddress)
 		verifyHueBridge("${it.value.mac}", (ip + ":" + port))
 	}
 }
@@ -261,7 +249,7 @@ Map bulbsDiscovered() {
 		bulbs.each {
 			def value = "${it.name}"
 			def key = app.id +"/"+ it.id
-			logg += "$value - $key, "
+            logg += "$value - $key, "
 			bulbmap["${key}"] = value
 		}
 	}
@@ -288,23 +276,22 @@ def installed() {
 def updated() {
 	log.trace "Updated with settings: ${settings}"
 	unsubscribe()
-	unschedule()
+    unschedule()
 	initialize()
 }
 
 def initialize() {
 	log.debug "Initializing"
-	unsubscribe(bridge)
-	state.inBulbDiscovery = false
-	state.bridgeRefreshCount = 0
-	state.bulbRefreshCount = 0
+    unsubscribe(bridge)
+    state.inBulbDiscovery = false
+    state.bridgeRefreshCount = 0
+    state.bulbRefreshCount = 0
 	state.updating = false
-	setupDeviceWatch()
 	if (selectedHue) {
-		addBridge()
-		addBulbs()
-		doDeviceSync()
-		runEvery5Minutes("doDeviceSync")
+   		addBridge()
+        addBulbs()
+        doDeviceSync()
+        runEvery5Minutes("doDeviceSync")
 	}
 }
 
@@ -322,14 +309,6 @@ def uninstalled(){
 	state.username = null
 }
 
-private setupDeviceWatch() {
-	def hub = location.hubs[0]
-	// Make sure that all child devices are enrolled in device watch
-	getChildDevices().each {
-		it.sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${hub?.hub?.hardwareID}\"}")
-	}
-}
-
 private upgradeDeviceType(device, newHueType) {
 	def deviceType = getDeviceType(newHueType)
 
@@ -378,6 +357,7 @@ def addBulbs() {
 					if (d) {
 						log.debug "created ${d.displayName} with id $dni"
 						d.completedSetup = true
+						d.refresh()
 					}
 				} else {
 					log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
@@ -407,23 +387,23 @@ def addBridge() {
 	if(vbridge) {
 		def d = getChildDevice(selectedHue)
 		if(!d) {
-	 		// compatibility with old devices
-			def newbridge = true
-			childDevices.each {
-				if (it.getDeviceDataByName("mac")) {
-					def newDNI = "${it.getDeviceDataByName("mac")}"
-					if (newDNI != it.deviceNetworkId) {
-						def oldDNI = it.deviceNetworkId
-						log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
-						it.setDeviceNetworkId("${newDNI}")
+     		// compatibility with old devices
+            def newbridge = true
+            childDevices.each {
+            	if (it.getDeviceDataByName("mac")) {
+                    def newDNI = "${it.getDeviceDataByName("mac")}"
+                    if (newDNI != it.deviceNetworkId) {
+                    	def oldDNI = it.deviceNetworkId
+                        log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
+                        it.setDeviceNetworkId("${newDNI}")
 						if (oldDNI == selectedHue) {
 							app.updateSetting("selectedHue", newDNI)
 						}
-						newbridge = false
-					}
-				}
-			}
-			if (newbridge) {
+                        newbridge = false
+                    }
+                }
+            }
+        	if (newbridge) {
 				// Hue uses last 6 digits of MAC address as ID number, this number is shown on the bottom of the bridge
 				def idNumber = getBridgeIdNumber(selectedHue)
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub, ["label": "Hue Bridge ($idNumber)"])
@@ -434,11 +414,9 @@ def addBridge() {
 					d.completedSetup = true
 					log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
 					def childDevice = getChildDevice(d.deviceNetworkId)
-					childDevice?.sendEvent(name: "status", value: "Online")
-					childDevice?.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false, isStateChange: true)
 					updateBridgeStatus(childDevice)
+					childDevice.sendEvent(name: "idNumber", value: idNumber)
 
-					childDevice?.sendEvent(name: "idNumber", value: idNumber)
 					if (vbridge.value.ip && vbridge.value.port) {
 						if (vbridge.value.ip.contains(".")) {
 							childDevice.sendEvent(name: "networkAddress", value: vbridge.value.ip + ":" +  vbridge.value.port)
@@ -590,47 +568,47 @@ void usernameHandler(physicalgraph.device.HubResponse hubResponse) {
 @Deprecated
 def locationHandler(evt) {
 	def description = evt.description
-	log.trace "Location: $description"
+    log.trace "Location: $description"
 
 	def hub = evt?.hubId
  	def parsedEvent = parseLanMessage(description)
 	parsedEvent << ["hub":hub]
 
 	if (parsedEvent?.ssdpTerm?.contains("urn:schemas-upnp-org:device:basic:1")) {
-		//SSDP DISCOVERY EVENTS
+    	//SSDP DISCOVERY EVENTS
 		log.trace "SSDP DISCOVERY EVENTS"
 		def bridges = getHueBridges()
 		log.trace bridges.toString()
 		if (!(bridges."${parsedEvent.ssdpUSN.toString()}")) {
-			//bridge does not exist
+        	//bridge does not exist
 			log.trace "Adding bridge ${parsedEvent.ssdpUSN}"
 			bridges << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
 		} else {
 			// update the values
-			def ip = convertHexToIP(parsedEvent.networkAddress)
-			def port = convertHexToInt(parsedEvent.deviceAddress)
-			def host = ip + ":" + port
+            def ip = convertHexToIP(parsedEvent.networkAddress)
+            def port = convertHexToInt(parsedEvent.deviceAddress)
+            def host = ip + ":" + port
 			log.debug "Device ($parsedEvent.mac) was already found in state with ip = $host."
-			def dstate = bridges."${parsedEvent.ssdpUSN.toString()}"
+            def dstate = bridges."${parsedEvent.ssdpUSN.toString()}"
 			def dni = "${parsedEvent.mac}"
-			def d = getChildDevice(dni)
-			def networkAddress = null
-			if (!d) {
-				childDevices.each {
-					if (it.getDeviceDataByName("mac")) {
-						def newDNI = "${it.getDeviceDataByName("mac")}"
+            def d = getChildDevice(dni)
+            def networkAddress = null
+            if (!d) {
+            	childDevices.each {
+                    if (it.getDeviceDataByName("mac")) {
+                        def newDNI = "${it.getDeviceDataByName("mac")}"
 						d = it
-						if (newDNI != it.deviceNetworkId) {
-							def oldDNI = it.deviceNetworkId
-							log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
-							it.setDeviceNetworkId("${newDNI}")
+                        if (newDNI != it.deviceNetworkId) {
+                            def oldDNI = it.deviceNetworkId
+                            log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
+                            it.setDeviceNetworkId("${newDNI}")
 							if (oldDNI == selectedHue) {
 								app.updateSetting("selectedHue", newDNI)
 							}
-							doDeviceSync()
-						}
-					}
-				}
+                            doDeviceSync()
+                        }
+                    }
+                }
 			} else {
 				updateBridgeStatus(d)
 				if (d.getDeviceDataByName("networkAddress")) {
@@ -638,22 +616,22 @@ def locationHandler(evt) {
 				} else {
 					networkAddress = d.latestState('networkAddress').stringValue
 				}
-				log.trace "Host: $host - $networkAddress"
-				if(host != networkAddress) {
-					log.debug "Device's port or ip changed for device $d..."
-					dstate.ip = ip
-					dstate.port = port
-					dstate.name = "Philips hue ($ip)"
-					d.sendEvent(name:"networkAddress", value: host)
-					d.updateDataValue("networkAddress", host)
-				}
-			}
+                log.trace "Host: $host - $networkAddress"
+                if(host != networkAddress) {
+                    log.debug "Device's port or ip changed for device $d..."
+                    dstate.ip = ip
+                    dstate.port = port
+                    dstate.name = "Philips hue ($ip)"
+                    d.sendEvent(name:"networkAddress", value: host)
+                    d.updateDataValue("networkAddress", host)
+            	}
+            }
 		}
 	} else if (parsedEvent.headers && parsedEvent.body) {
 		log.trace "HUE BRIDGE RESPONSES"
 		def headerString = parsedEvent.headers.toString()
 		if (headerString?.contains("xml")) {
-			log.trace "description.xml response (application/xml)"
+            log.trace "description.xml response (application/xml)"
 			def body = new XmlSlurper().parseText(parsedEvent.body)
 			if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
 				def bridges = getHueBridges()
@@ -665,7 +643,7 @@ def locationHandler(evt) {
 				}
 			}
 		} else if(headerString?.contains("json") && isValidSource(parsedEvent.mac)) {
-			log.trace "description.xml response (application/json)"
+            log.trace "description.xml response (application/json)"
 			def body = new groovy.json.JsonSlurper().parseText(parsedEvent.body)
 			if (body.success != null) {
 				if (body.success[0] != null) {
@@ -702,7 +680,7 @@ def doDeviceSync(){
 	poll()
 	ssdpSubscribe()
 	discoverBridges()
-	checkBridgeStatus()
+    checkBridgeStatus()
 }
 
 /**
@@ -715,14 +693,10 @@ def doDeviceSync(){
 private void updateBridgeStatus(childDevice) {
 	// Update activity timestamp if child device is a valid bridge
 	def vbridges = getVerifiedHueBridges()
-	def vbridge = vbridges.find {
-		"${it.value.mac}".toUpperCase() == childDevice?.device?.deviceNetworkId?.toUpperCase()
-	}
+	def vbridge = vbridges.find {"${it.value.mac}".toUpperCase() == childDevice?.device?.deviceNetworkId?.toUpperCase()}
 	vbridge?.value?.lastActivity = now()
-	if (vbridge && childDevice?.device?.currentValue("status") == "Offline") {
-		log.debug "$childDevice is back Online"
+	if(vbridge) {
 		childDevice?.sendEvent(name: "status", value: "Online")
-		childDevice?.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false, isStateChange: true)
 	}
 }
 
@@ -731,37 +705,29 @@ private void updateBridgeStatus(childDevice) {
  * for the bridge and all connected lights. Also, set ID number on bridge if not done previously.
  */
 private void checkBridgeStatus() {
-	def bridges = getHueBridges()
-	// Check if each bridge has been heard from within the last 11 minutes (2 poll intervals times 5 minutes plus buffer)
-	def time = now() - (1000 * 60 * 11)
-	bridges.each {
-		def d = getChildDevice(it.value.mac)
-		if (d) {
-			// Set id number on bridge if not done
-			if (it.value.idNumber == null) {
-				it.value.idNumber = getBridgeIdNumber(it.value.serialNumber)
+    def bridges = getHueBridges()
+    // Check if each bridge has been heard from within the last 11 minutes (2 poll intervals times 5 minutes plus buffer)
+    def time = now() - (1000 * 60 * 11)
+    bridges.each {
+        def d = getChildDevice(it.value.mac)
+	    if(d) {
+		    // Set id number on bridge if not done
+		    if (it.value.idNumber == null) {
+			    it.value.idNumber = getBridgeIdNumber(it.value.serialNumber)
 				d.sendEvent(name: "idNumber", value: it.value.idNumber)
-			}
+		    }
 
 			if (it.value.lastActivity < time) { // it.value.lastActivity != null &&
-				if (d.currentStatus == "Online") {
-					log.warn "$d is Offline"
-					d.sendEvent(name: "status", value: "Offline")
-					d.sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false, isStateChange: true)
+				log.warn "Bridge $it.value.idNumber is Offline"
+				d.sendEvent(name: "status", value: "Offline")
 
-					Calendar currentTime = Calendar.getInstance()
-					getChildDevices().each {
-						def id = getId(it)
-						if (state.bulbs[id]?.online == true) {
-							state.bulbs[id]?.online = false
-							state.bulbs[id]?.unreachableSince = currentTime.getTimeInMillis()
-							it.sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false, isStateChange: true)
-						}
-					}
+				state.bulbs?.each {
+					it.value.online = false
 				}
-			} else if (d.currentStatus == "Offline") {
-				log.debug "$d is back Online"
-				d.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false, isStateChange: true)
+				getChildDevices().each {
+					it.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", isStateChange: true, displayed: false)
+				}
+			} else {
 				d.sendEvent(name: "status", value: "Online")//setOnline(false)
 			}
 		}
@@ -813,24 +779,24 @@ def parse(childDevice, description) {
 	def parsedEvent = parseLanMessage(description)
 	if (parsedEvent.headers && parsedEvent.body) {
 		def headerString = parsedEvent.headers.toString()
-		def bodyString = parsedEvent.body.toString()
+        def bodyString = parsedEvent.body.toString()
 		if (headerString?.contains("json")) {
-			def body
-			try {
-				body = new groovy.json.JsonSlurper().parseText(bodyString)
-			} catch (all) {
-				log.warn "Parsing Body failed - trying again..."
-				poll()
-			}
-			if (body instanceof java.util.Map) {
-				// get (poll) reponse
-				return handlePoll(body)
+        	def body
+        	try {
+            	body = new groovy.json.JsonSlurper().parseText(bodyString)
+            } catch (all) {
+            	log.warn "Parsing Body failed - trying again..."
+                poll()
+            }
+            if (body instanceof java.util.Map) {
+                // get (poll) reponse
+                return handlePoll(body)
 			} else {
 				//put response
 				return handleCommandResponse(body)
-			}
-		}
-	} else {
+            }
+        }
+   } else {
 		log.debug "parse - got something other than headers,body..."
 		return []
 	}
@@ -851,19 +817,19 @@ private sendColorEvents(device, xy, hue, sat, ct, colormode = null) {
 		device.sendEvent([name: "colorTemperature", value: temp, descriptionText: "Color temperature has changed"])
 		// Return because color temperature change is not counted as a color change in SmartThings so no hex update necessary
 		return
-	}
+                    }
 
 	if (hue != null) {
 		// 0-65535
 		def value = Math.min(Math.round(hue * 100 / 65535), 65535) as int
 		events["hue"] = [name: "hue", value: value, descriptionText: "Color has changed", displayed: false]
-	}
+                }
 
 	if (sat != null) {
 		// 0-254
 		def value = Math.round(sat * 100 / 254) as int
-		events["saturation"] = [name: "saturation", value: value, descriptionText: "Color has changed", displayed: false]
-	}
+        events["saturation"] = [name: "saturation", value: value, descriptionText: "Color has changed", displayed: false]
+            }
 
 	// Following is used to decide what to base hex calculations on since it is preferred to return a colorchange in hex
 	if (xy != null && colormode != "hs") {
@@ -949,15 +915,8 @@ private handleCommandResponse(body) {
 					updates[childDeviceNetworkId]."$eventType" = v
 				}
 			}
-		} else if (payload?.error) {
-			log.warn "Error returned from Hue bridge, error = ${payload?.error}"
-			// Check for unauthorized user
-			if (payload?.error?.type?.value == 1) {
-				log.error "Hue username is not valid"
-				state.refreshUsernameNeeded = true
-				state.username = null
-			}
-			return []
+		} else if (payload.error) {
+			log.warn "Error returned from Hue bridge error = ${body?.error}"
 		}
 	}
 
@@ -965,9 +924,12 @@ private handleCommandResponse(body) {
 	updates.each { childDeviceNetworkId, params ->
 		def device = getChildDevice(childDeviceNetworkId)
 		def id = getId(device)
-		sendBasicEvents(device, "on", params.on)
-		sendBasicEvents(device, "bri", params.bri)
-		sendColorEvents(device, params.xy, params.hue, params.sat, params.ct)
+		// If device is offline, then don't send events which will update device watch
+		if (isOnline(id)) {
+			sendBasicEvents(device, "on", params.on)
+			sendBasicEvents(device, "bri", params.bri)
+			sendColorEvents(device, params.xy, params.hue, params.sat, params.ct)
+		}
 	}
 	return []
 }
@@ -1000,38 +962,39 @@ private handlePoll(body) {
 
 	def bulbs = getChildDevices()
 	for (bulb in body) {
-		def device = bulbs.find { it.deviceNetworkId == "${app.id}/${bulb.key}" }
+		def device = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}
 		if (device) {
 			if (bulb.value.state?.reachable) {
-				if (state.bulbs[bulb.key]?.online == false || state.bulbs[bulb.key]?.online == null) {
+				if (state.bulbs[bulb.key]?.online == false) {
 					// light just came back online, notify device watch
-					device.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false, isStateChange: true)
+					def lastActivity = now()
+					device.sendEvent(name: "deviceWatch-status", value: "ONLINE", description: "Last Activity is on ${new Date((long) lastActivity)}", displayed: false, isStateChange: true)
 					log.debug "$device is Online"
 				}
 				// Mark light as "online"
 				state.bulbs[bulb.key]?.unreachableSince = null
 				state.bulbs[bulb.key]?.online = true
+
+				// If user just executed commands, then do not send events to avoid confusing the turning on/off state
+				if (!state.updating) {
+					sendBasicEvents(device, "on", bulb.value?.state?.on)
+					sendBasicEvents(device, "bri", bulb.value?.state?.bri)
+					sendColorEvents(device, bulb.value?.state?.xy, bulb.value?.state?.hue, bulb.value?.state?.sat, bulb.value?.state?.ct, bulb.value?.state?.colormode)
+				}
 			} else {
 				if (state.bulbs[bulb.key]?.unreachableSince == null) {
 					// Store the first time where device was reported as "unreachable"
 					state.bulbs[bulb.key]?.unreachableSince = currentTime.getTimeInMillis()
-				}
-				if (state.bulbs[bulb.key]?.online || state.bulbs[bulb.key]?.online == null) {
+				} else if (state.bulbs[bulb.key]?.online) {
 					// Check if device was "unreachable" for more than 11 minutes and mark "offline" if necessary
-					if (state.bulbs[bulb.key]?.unreachableSince < time11.getTimeInMillis() || state.bulbs[bulb.key]?.online == null) {
+					if (state.bulbs[bulb.key]?.unreachableSince < time11.getTimeInMillis()) {
 						log.warn "$device went Offline"
 						state.bulbs[bulb.key]?.online = false
-						device.sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false, isStateChange: true)
+						device.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", displayed: false, isStateChange: true)
 					}
 				}
 				log.warn "$device may not reachable by Hue bridge"
 			}
-			// If user just executed commands, then do not send events to avoid confusing the turning on/off state
-			if (!state.updating) {
-				sendBasicEvents(device, "on", bulb.value?.state?.on)
-				sendBasicEvents(device, "bri", bulb.value?.state?.bri)
-				sendColorEvents(device, bulb.value?.state?.xy, bulb.value?.state?.hue, bulb.value?.state?.sat, bulb.value?.state?.ct, bulb.value?.state?.colormode)
-			}
 		}
 	}
 	return []
@@ -1050,16 +1013,16 @@ def updateHandler() {
 
 def hubVerification(bodytext) {
 	log.trace "Bridge sent back description.xml for verification"
-	def body = new XmlSlurper().parseText(bodytext)
-	if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
-		def bridges = getHueBridges()
-		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
-		if (bridge) {
-			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
-		} else {
-			log.error "/description.xml returned a bridge that didn't exist"
-		}
-	}
+    def body = new XmlSlurper().parseText(bodytext)
+    if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
+        def bridges = getHueBridges()
+        def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
+        if (bridge) {
+            bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
+        } else {
+            log.error "/description.xml returned a bridge that didn't exist"
+        }
+    }
 }
 
 def on(childDevice) {
@@ -1068,7 +1031,7 @@ def on(childDevice) {
 	updateInProgress()
 	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [on: true])
-	return "Bulb is turning On"
+    return "Bulb is turning On"
 }
 
 def off(childDevice) {
@@ -1077,15 +1040,15 @@ def off(childDevice) {
 	updateInProgress()
 	createSwitchEvent(childDevice, "off")
 	put("lights/$id/state", [on: false])
-	return "Bulb is turning Off"
+    return "Bulb is turning Off"
 }
 
 def setLevel(childDevice, percent) {
 	log.debug "Executing 'setLevel'"
 	def id = getId(childDevice)
-	updateInProgress()
+    updateInProgress()
 	// 1 - 254
-	def level
+    def level
 	if (percent == 1)
 		level = 1
 	else
@@ -1119,7 +1082,7 @@ def setSaturation(childDevice, percent) {
 def setHue(childDevice, percent) {
 	log.debug "Executing 'setHue($percent)'"
 	def id = getId(childDevice)
-	updateInProgress()
+    updateInProgress()
 	// 0 - 65535
 	def level =	Math.min(Math.round(percent * 65535 / 100), 65535)
 	// TODO should this be done by app only or should we default to on?
@@ -1131,7 +1094,7 @@ def setHue(childDevice, percent) {
 def setColorTemperature(childDevice, huesettings) {
 	log.debug "Executing 'setColorTemperature($huesettings)'"
 	def id = getId(childDevice)
-	updateInProgress()
+    updateInProgress()
 	// 153 (6500K) to 500 (2000K)
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000/huesettings)
 	createSwitchEvent(childDevice, "on")
@@ -1140,14 +1103,14 @@ def setColorTemperature(childDevice, huesettings) {
 }
 
 def setColor(childDevice, huesettings) {
-	log.debug "Executing 'setColor($huesettings)'"
+    log.debug "Executing 'setColor($huesettings)'"
 	def id = getId(childDevice)
-	updateInProgress()
+    updateInProgress()
 
-	def value = [:]
-	def hue = null
-	def sat = null
-	def xy = null
+    def value = [:]
+    def hue = null
+    def sat = null
+    def xy = null
 
 	// Prefer hue/sat over hex to make sure it works with the majority of the smartapps
 	if (huesettings.hue != null || huesettings.sat != null) {
@@ -1172,32 +1135,48 @@ def setColor(childDevice, huesettings) {
 		// value.xy = calculateXY(hex, model)
 		// Once groups, or scenes are introduced it might be a good idea to use unique models again
 		value.xy = calculateXY(hex)
-	}
+    }
 */
 
-	// Default behavior is to turn light on
-	value.on = true
+    // Default behavior is to turn light on
+    value.on = true
 
-	if (huesettings.level != null) {
-		if (huesettings.level <= 0)
-			value.on = false
-		else if (huesettings.level == 1)
-			value.bri = 1
-		else
+    if (huesettings.level != null) {
+        if (huesettings.level <= 0)
+            value.on = false
+        else if (huesettings.level == 1)
+            value.bri = 1
+        else
 			value.bri = Math.min(Math.round(huesettings.level * 254 / 100), 254)
-	}
-	value.alert = huesettings.alert ? huesettings.alert : "none"
-	value.transitiontime = huesettings.transitiontime ? huesettings.transitiontime : 4
+    }
+    value.alert = huesettings.alert ? huesettings.alert : "none"
+    value.transitiontime = huesettings.transitiontime ? huesettings.transitiontime : 4
 
-	// Make sure to turn off light if requested
-	if (huesettings.switch == "off")
-		value.on = false
+    // Make sure to turn off light if requested
+    if (huesettings.switch == "off")
+        value.on = false
 
 	createSwitchEvent(childDevice, value.on ? "on" : "off")
-	put("lights/$id/state", value)
+    put("lights/$id/state", value)
 	return "Setting color to $value"
 }
 
+def ping(childDevice) {
+	if (childDevice.device?.deviceNetworkId?.equalsIgnoreCase(selectedHue)) {
+		if (childDevice.device?.currentValue("status")?.equalsIgnoreCase("Online")) {
+			childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Bridge is reachable", displayed: false, isStateChange: true)
+			return "Bridge is Online"
+		} else {
+			return "Bridge is Offline"
+		}
+	} else if (isOnline(getId(childDevice))) {
+		childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Light is reachable", displayed: false, isStateChange: true)
+		return "Device is Online"
+	} else {
+		return "Device is Offline"
+	}
+}
+
 private getId(childDevice) {
 	if (childDevice.device?.deviceNetworkId?.startsWith("HUE")) {
 		return childDevice.device?.deviceNetworkId[3..-1]
@@ -1215,7 +1194,7 @@ private poll() {
 }
 
 private isOnline(id) {
-	return (state.bulbs[id]?.online != null && state.bulbs[id]?.online) || state.bulbs[id]?.online == null
+	return (state.bulbs[id].online != null && state.bulbs[id].online) || state.bulbs[id].online == null
 }
 
 private put(path, body) {
@@ -1248,30 +1227,30 @@ private getBridgeIdNumber(serialNumber) {
 private getBridgeIP() {
 	def host = null
 	if (selectedHue) {
-		def d = getChildDevice(selectedHue)
-		if (d) {
-			if (d.getDeviceDataByName("networkAddress"))
-				host =  d.getDeviceDataByName("networkAddress")
-		else
-				host = d.latestState('networkAddress').stringValue
-		}
-		if (host == null || host == "") {
-			def serialNumber = selectedHue
-			def bridge = getHueBridges().find { it?.value?.serialNumber?.equalsIgnoreCase(serialNumber) }?.value
-			if (!bridge) {
-				bridge = getHueBridges().find { it?.value?.mac?.equalsIgnoreCase(serialNumber) }?.value
-			}
-			if (bridge?.ip && bridge?.port) {
-				if (bridge?.ip.contains("."))
-					host = "${bridge?.ip}:${bridge?.port}"
-				else
-					host = "${convertHexToIP(bridge?.ip)}:${convertHexToInt(bridge?.port)}"
-			} else if (bridge?.networkAddress && bridge?.deviceAddress)
-				host = "${convertHexToIP(bridge?.networkAddress)}:${convertHexToInt(bridge?.deviceAddress)}"
-		}
-		log.trace "Bridge: $selectedHue - Host: $host"
-	}
-	return host
+        def d = getChildDevice(selectedHue)
+    	if (d) {
+        	if (d.getDeviceDataByName("networkAddress"))
+            	host =  d.getDeviceDataByName("networkAddress")
+        else
+        		host = d.latestState('networkAddress').stringValue
+        }
+        if (host == null || host == "") {
+            def serialNumber = selectedHue
+            def bridge = getHueBridges().find { it?.value?.serialNumber?.equalsIgnoreCase(serialNumber) }?.value
+            if (!bridge) {
+            	bridge = getHueBridges().find { it?.value?.mac?.equalsIgnoreCase(serialNumber) }?.value
+            }
+            if (bridge?.ip && bridge?.port) {
+            	if (bridge?.ip.contains("."))
+            		host = "${bridge?.ip}:${bridge?.port}"
+                else
+                	host = "${convertHexToIP(bridge?.ip)}:${convertHexToInt(bridge?.port)}"
+            } else if (bridge?.networkAddress && bridge?.deviceAddress)
+            	host = "${convertHexToIP(bridge?.networkAddress)}:${convertHexToInt(bridge?.deviceAddress)}"
+        }
+        log.trace "Bridge: $selectedHue - Host: $host"
+    }
+    return host
 }
 
 private Integer convertHexToInt(hex) {
@@ -1282,7 +1261,7 @@ def convertBulbListToMap() {
 	try {
 		if (state.bulbs instanceof java.util.List) {
 			def map = [:]
-			state.bulbs?.unique {it.id}.each { bulb ->
+			state.bulbs.unique {it.id}.each { bulb ->
 				map << ["${bulb.id}":["id":bulb.id, "name":bulb.name, "type": bulb.type, "modelid": bulb.modelid, "hub":bulb.hub, "online": bulb.online]]
 			}
 			state.bulbs = map
@@ -1311,7 +1290,7 @@ private List getRealHubFirmwareVersions() {
  * @param childDevice device to send event for
  * @param setSwitch The new switch state, "on" or "off"
  * @param setLevel Optional, switchLevel between 0-100, used if you set level to 0 for example since
- *				  that should generate "off" instead of level change
+ *                  that should generate "off" instead of level change
  */
 private void createSwitchEvent(childDevice, setSwitch, setLevel = null) {
 
@@ -1454,8 +1433,8 @@ private float[] calculateXY(colorStr, model = null) {
 		xy[0] = closestPoint.x;
 		xy[1] = closestPoint.y;
 	}
-	//		xy[0] = PHHueHelper.precision(4, xy[0]);
-	//		xy[1] = PHHueHelper.precision(4, xy[1]);
+	//        xy[0] = PHHueHelper.precision(4, xy[0]);
+	//        xy[1] = PHHueHelper.precision(4, xy[1]);
 
 
 	// TODO needed, assume it just sets number of decimals?
@@ -1473,7 +1452,7 @@ private float[] calculateXY(colorStr, model = null) {
  *
  * @param points the float array contain x and the y value. [x,y]
  * @param model the model of the lamp, example: "LCT001" for hue bulb. Used to calculate the color gamut.
- *		If this value is empty the default gamut values are used.
+ *          If this value is empty the default gamut values are used.
  * @return the color value in hex (#ff03d3). If xy is null OR xy is not an array of size 2, Color. BLACK will be returned
  */
 private String colorFromXY(points, model ) {
@@ -1787,4 +1766,3 @@ def hsvToHex(hue, sat, value = 100){
 
 	return "#$r1$g1$b1"
 }
-

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -387,7 +387,7 @@ def updateDevices() {
 			} else {
 				childDevice = addChildDevice(app.namespace, "LIFX White Bulb", device.id, null, data)
 			}
-			}
+		}
 	}
 	getChildDevices().findAll { !selectors.contains("${it.deviceNetworkId}") }.each {
 		log.info("Deleting ${it.deviceNetworkId}")

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -97,7 +97,7 @@ def authPage() {
     def description = null
     if (!state.HarmonyAccessToken) {
 		if (!state.accessToken) {
-			log.debug "Harmony - About to create access token"
+			log.debug "About to create access token"
 			createAccessToken()
 		}
         description = "Click to enter Harmony Credentials"
@@ -141,13 +141,13 @@ def callback() {
 	def redirectUrl = null
 	if (params.authQueryString) {
 		redirectUrl = URLDecoder.decode(params.authQueryString.replaceAll(".+&redirect_url=", ""))
-		log.debug "Harmony - redirectUrl: ${redirectUrl}"
+		log.debug "redirectUrl: ${redirectUrl}"
 	} else {
-		log.warn "Harmony - No authQueryString"
+		log.warn "No authQueryString"
 	}
 
 	if (state.HarmonyAccessToken) {
-		log.debug "Harmony - Access token already exists"
+		log.debug "Access token already exists"
 		discovery()
 		success()
 	} else {
@@ -155,27 +155,27 @@ def callback() {
 		if (code) {
 			if (code.size() > 6) {
 				// Harmony code
-				log.debug "Harmony - Exchanging code for access token"
+				log.debug "Exchanging code for access token"
 				receiveToken(redirectUrl)
 			} else {
 				// Initiate the Harmony OAuth flow.
 				init()
 			}
 		} else {
-			log.debug "Harmony - This code should be unreachable"
+			log.debug "This code should be unreachable"
 			success()
 		}
 	}
 }
 
 def init() {
-	log.debug "Harmony - Requesting Code"
+	log.debug "Requesting Code"
 	def oauthParams = [client_id: "${appSettings.clientId}", scope: "remote", response_type: "code", redirect_uri: "${servercallbackUrl}" ]
 	redirect(location: "https://home.myharmony.com/oauth2/authorize?${toQueryString(oauthParams)}")
 }
 
 def receiveToken(redirectUrl = null) {
-	log.debug "Harmony - receiveToken"
+	log.debug "receiveToken"
     def oauthParams = [ client_id: "${appSettings.clientId}", client_secret: "${appSettings.clientSecret}", grant_type: "authorization_code", code: params.code ]
     def params = [
       uri: "https://home.myharmony.com/oauth2/token?${toQueryString(oauthParams)}",
@@ -186,7 +186,7 @@ def receiveToken(redirectUrl = null) {
         }
 	} catch (java.util.concurrent.TimeoutException e) {
     	fail(e)
-		log.warn "Harmony - Connection timed out, please try again later."
+		log.warn "Connection timed out, please try again later."
 	}
     discovery()
 	if (state.HarmonyAccessToken) {
@@ -310,7 +310,7 @@ def buildRedirectUrl(page) {
 
 def installed() {
 	if (!state.accessToken) {
-		log.debug "Harmony - About to create access token"
+		log.debug "About to create access token"
 		createAccessToken()
 	} else {
 		initialize()
@@ -319,7 +319,7 @@ def installed() {
 
 def updated() {
 	if (!state.accessToken) {
-		log.debug "Harmony - About to create access token"
+		log.debug "About to create access token"
 		createAccessToken()
 	} else {
 		initialize()
@@ -330,9 +330,9 @@ def uninstalled() {
 	if (state.HarmonyAccessToken) {
 		try {
         	state.HarmonyAccessToken = ""
-        	log.debug "Harmony - Success disconnecting Harmony from SmartThings"
+        	log.debug "Success disconnecting Harmony from SmartThings"
 		} catch (groovyx.net.http.HttpResponseException e) {
-			log.error "Harmony - Error disconnecting Harmony from SmartThings: ${e.statusCode}"
+			log.error "Error disconnecting Harmony from SmartThings: ${e.statusCode}"
 		}
 	}
 }
@@ -341,8 +341,7 @@ def initialize() {
 	state.aux = 0
 	if (selectedhubs || selectedactivities) {
 		addDevice()
-    runEvery5Minutes("poll")
-    getActivityList()
+        runEvery5Minutes("poll")
 	}
 }
 
@@ -351,7 +350,7 @@ def getHarmonydevices() {
 }
 
 Map discoverDevices() {
-    log.trace "Harmony - Discovering devices..."
+    log.trace "Discovering devices..."
     discovery()
     if (getHarmonydevices() != []) {
         def devices = state.Harmonydevices.hubs
@@ -381,52 +380,52 @@ def discovery() {
 	try {
 		httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
 	    	if (response.status == 200) {
-            	log.debug "Harmony - valid Token"
+            	log.debug "valid Token"
                 state.Harmonydevices = response.data
                 state.resethub = false
 	        } else {
-            	log.debug "Harmony - Error: $response.status"
+            	log.debug "Error: $response.status"
             }
 	    }
 	} catch (groovyx.net.http.HttpResponseException e) {
         if (e.statusCode == 401) { // token is expired
             state.remove("HarmonyAccessToken")
-            log.warn "Harmony - Harmony Access token has expired"
+            log.warn "Harmony Access token has expired"
         }
 	} catch (java.net.SocketTimeoutException e) {
-		log.warn "Harmony - Connection to the hub timed out. Please restart the hub and try again."
+		log.warn "Connection to the hub timed out. Please restart the hub and try again."
     state.resethub = true
  	} catch (e) {
-    log.info "Harmony - Error: $e"
+    log.info "Logitech Harmony - Error: $e"
 	}
     return null
 }
 
 def addDevice() {
-    log.trace "Harmony - Adding Hubs"
+    log.trace "Adding Hubs"
     selectedhubs.each { dni ->
         def d = getChildDevice(dni)
         if(!d) {
             def newAction = state.HarmonyHubs.find { it.key == dni }
             d = addChildDevice("smartthings", "Logitech Harmony Hub C2C", dni, null, [label:"${newAction.value}"])
-            log.trace "Harmony - Created ${d.displayName} with id $dni"
+            log.trace "created ${d.displayName} with id $dni"
             poll()
         } else {
-            log.trace "Harmony - Found ${d.displayName} with id $dni already exists"
+            log.trace "found ${d.displayName} with id $dni already exists"
         }
     }
-    log.trace "Harmony - Adding Activities"
+    log.trace "Adding Activities"
     selectedactivities.each { dni ->
         def d = getChildDevice(dni)
         if(!d) {
             def newAction = state.HarmonyActivities.find { it.key == dni }
             if (newAction) {
 	            d = addChildDevice("smartthings", "Harmony Activity", dni, null, [label:"${newAction.value} [Harmony Activity]"])
-	            log.trace "Harmony - Created ${d.displayName} with id $dni"
+	            log.trace "created ${d.displayName} with id $dni"
 	            poll()
             }
         } else {
-            log.trace "Harmony - Found ${d.displayName} with id $dni already exists"
+            log.trace "found ${d.displayName} with id $dni already exists"
         }
     }
 }
@@ -456,17 +455,17 @@ def activity(dni,mode) {
 
 def activityResponse(response, data) {
   if (response.hasError()) {
-    log.error "Harmony - response has error: $response.errorMessage"
+    log.error "Logitech Harmony - response has error: $response.errorMessage"
     if (response.status == 401) { // token is expired
       state.remove("HarmonyAccessToken")
-      log.warn "Harmony - Access token has expired"
+      log.warn "Logitech Harmony - Access token has expired"
     }
   } else {
     if (response.status == 200) {
-      log.trace "Harmony - Command sent succesfully"
+      log.trace "Command sent succesfully"
       poll()
     } else {
-      log.trace "Harmony - Command failed. Error: $response.status"
+      log.trace "Command failed. Error: $response.status"
     }
   }
 }
@@ -482,16 +481,16 @@ def poll() {
         ]
         asynchttp_v1.get('pollResponse', params)
       } else {
-        log.warn "Harmony - Access token has expired"
+        log.warn "Logitech Harmony - Access token has expired"
       }
 }
 
 def pollResponse(response, data) {
 	if (response.hasError()) {
-    log.error "Harmony - response has error: $response.errorMessage"
+    log.error "Logitech Harmony - response has error: $response.errorMessage"
     if (response.status == 401) { // token is expired
       state.remove("HarmonyAccessToken")
-      log.warn "Harmony - Access token has expired"
+      log.warn "Logitech Harmony - Access token has expired"
     }
 	} else {
 			def ResponseValues
@@ -499,7 +498,7 @@ def pollResponse(response, data) {
 					// json response already parsed into JSONElement object
 					ResponseValues = response.json
 			} catch (e) {
-					log.error "Harmony - error parsing json from response: $e"
+					log.error "Logitech Harmony - error parsing json from response: $e"
 			}
 			if (ResponseValues) {
         def map = [:]
@@ -521,7 +520,7 @@ def pollResponse(response, data) {
                   }
               }
           } else {
-            log.trace "Harmony - error response: $it.value.message"
+            log.trace "Logitech Harmony - error response: $it.value.message"
           }
         }
         def activities = getChildDevices()
@@ -546,43 +545,11 @@ def pollResponse(response, data) {
             }
         }
 			} else {
-					log.debug "Harmony - did not get json results from response body: $response.data"
+					log.debug "Logitech Harmony - did not get json results from response body: $response.data"
 			}
 	}
 }
 
-def getActivityList() {
-    if (state.HarmonyAccessToken) {
-        def Params = [auth: state.HarmonyAccessToken]
-        def url = "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(Params)}"
-        try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
-                response.data.hubs.each {
-                    def hub = getChildDevice("harmony-${it.key}")
-                    if (hub) {
-                    	def hubname = getHubName("${it.key}")
-                        def activities = []
-                        def aux = it.value.response.data.activities.size()
-                        if (aux >= 1) {
-                            activities = it.value.response.data.activities.collect {
-                                [id: it.key, name: it.value['name'], type: it.value['type']]
-                            }
-                            activities += [id: "off", name: "Activity OFF", type: "0"]
-                        }
-                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
-					          }
-                }
-            }
-        } catch (groovyx.net.http.HttpResponseException e) {
-        	log.trace e
-        } catch (java.net.SocketTimeoutException e) {
-        	log.trace e
-		    } catch(Exception e) {
-        	log.trace e
-		    }
-    }
-}
-
 def getActivityName(activity,hubId) {
 	// GET ACTIVITY'S NAME
     def actname = activity
@@ -643,7 +610,7 @@ def sendNotification(msg) {
 
 def hookEventHandler() {
     // log.debug "In hookEventHandler method."
-    log.debug "Harmony - request = ${request}"
+    log.debug "request = ${request}"
 
     def json = request.JSON
 
@@ -652,14 +619,14 @@ def hookEventHandler() {
 }
 
 def listDevices() {
-	log.debug "Harmony - getDevices(), params: ${params}"
+	log.debug "getDevices, params: ${params}"
 	allDevices.collect {
 		deviceItem(it)
 	}
 }
 
 def getDevice() {
-	log.debug "Harmony - getDevice(), params: ${params}"
+	log.debug "getDevice, params: ${params}"
 	def device = allDevices.find { it.id == params.id }
 	if (!device) {
 		render status: 404, data: '{"msg": "Device not found"}'
@@ -672,7 +639,7 @@ def updateDevice() {
 	def data = request.JSON
 	def command = data.command
 	def arguments = data.arguments
-	log.debug "Harmony - updateDevice(), params: ${params}, request: ${data}"
+	log.debug "updateDevice, params: ${params}, request: ${data}"
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
@@ -740,7 +707,7 @@ def getDeviceCapabilityCommands(deviceCapabilities) {
 }
 
 def listSubscriptions() {
-	log.debug "Harmony - listSubscriptions()"
+	log.debug "listSubscriptions()"
 	app.subscriptions?.findAll { it.device?.device && it.device.id }?.collect {
 		def deviceInfo = state[it.device.id]
 		def response = [
@@ -761,17 +728,17 @@ def addSubscription() {
 	def attribute = data.attributeName
 	def callbackUrl = data.callbackUrl
 
-	log.debug "Harmony - addSubscription, params: ${params}, request: ${data}"
+	log.debug "Logitech Harmony - addSubscription, params: ${params}, request: ${data}"
 	if (!attribute) {
 		render status: 400, data: '{"msg": "attributeName is required"}'
 	} else {
 		def device = allDevices.find { it.id == data.deviceId }
 		if (device) {
 			if (!state.harmonyHubs) {
-				log.debug "Harmony - Adding callbackUrl: $callbackUrl"
+				log.debug "Adding callbackUrl: $callbackUrl"
 				state[device.id] = [callbackUrl: callbackUrl]
 			}
-			log.debug "Harmony - Adding subscription"
+			log.debug "Adding subscription"
 			def subscription = subscribe(device, attribute, deviceHandler)
 			if (!subscription || !subscription.eventSubscription) {
 				subscription = app.subscriptions?.find { it.device?.device && it.device.id == data.deviceId && it.data == attribute && it.handler == 'deviceHandler' }
@@ -799,7 +766,7 @@ def removeSubscription() {
 
 	log.debug "removeSubscription, params: ${params}, subscription: ${subscription}, device: ${device}"
 	if (device) {
-		log.debug "Harmony - Removing subscription for device: ${device.id}"
+		log.debug "Removing subscription for device: ${device.id}"
 		state.remove(device.id)
 		unsubscribe(device)
 	}
@@ -823,17 +790,17 @@ def deviceHandler(evt) {
 	def deviceInfo = state[evt.deviceId]
 	if (state.harmonyHubs) {
 		state.harmonyHubs.each { harmonyHub ->
-      log.trace "Harmony - Sending data to $harmonyHub.name"
+      log.trace "Logitech Harmony - Sending data to $harmonyHub.name"
 			sendToHarmony(evt, harmonyHub.callbackUrl)
 		}
 	} else if (deviceInfo) {
 		if (deviceInfo.callbackUrl) {
 			sendToHarmony(evt, deviceInfo.callbackUrl)
 		} else {
-			log.warn "Harmony - No callbackUrl set for device: ${evt.deviceId}"
+			log.warn "No callbackUrl set for device: ${evt.deviceId}"
 		}
 	} else {
-		log.warn "Harmony - No subscribed device found for device: ${evt.deviceId}"
+		log.warn "No subscribed device found for device: ${evt.deviceId}"
 	}
 }
 
@@ -857,12 +824,12 @@ def sendToHarmony(evt, String callbackUrl) {
       body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
     ]
     try {
-        log.debug "Harmony - Sending data to Harmony Cloud: $params"
+        log.debug "Sending data to Harmony Cloud: $params"
         httpPostJson(params) { resp ->
-            log.debug "Harmony - Cloud Response: ${resp.status}"
+            log.debug "Harmony Cloud - Response: ${resp.status}"
         }
     } catch (e) {
-        log.error "Harmony - Cloud Something went wrong: $e"
+        log.error "Harmony Cloud - Something went wrong: $e"
     }
   }
 }
@@ -887,10 +854,10 @@ def activityCallback() {
 		if (data.errorCode == "200") {
 			device.setCurrentActivity(data.currentActivityId)
 		} else {
-			log.warn "Harmony - Activity callback error: ${data}"
+			log.warn "Activity callback error: ${data}"
 		}
 	} else {
-		log.warn "Harmony - Activity callback sent to non-existant dni: ${params.dni}"
+		log.warn "Activity callback sent to non-existant dni: ${params.dni}"
 	}
 	render status: 200, data: '{"msg": "Successfully received callbackUrl"}'
 }
@@ -924,13 +891,13 @@ def harmony() {
 }
 
 def deleteHarmony() {
-	log.debug "Harmony - Trying to delete Harmony hub with mac: ${params.mac}"
+	log.debug "Trying to delete Harmony hub with mac: ${params.mac}"
 	def harmonyHub = state.harmonyHubs?.find { it.mac == params.mac }
 	if (harmonyHub) {
-		log.debug "Harmony - Deleting Harmony hub with mac: ${params.mac}"
+		log.debug "Deleting Harmony hub with mac: ${params.mac}"
 		state.harmonyHubs.remove(harmonyHub)
 	} else {
-		log.debug "Harmony - Couldn't find Harmony hub with mac: ${params.mac}"
+		log.debug "Couldn't find Harmony hub with mac: ${params.mac}"
 	}
 	render status: 204, data: "{}"
 }