Adding changes mentioned by @strelitzia123

devicedata has been deprecated in favor of getstationsdata and will be removed at the end of November.

*Note* I haven't actually tested this change due to time limitations. Someone should check this out and verify it behaves properly before merging.

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -148,12 +148,14 @@ def generateEvent(Map results) {
 						 handlerName: name]
 
 			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint" ) {
-				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
+				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
 				isChange = isTemperatureStateChange(device, name, value.toString())
 				isDisplayed = isChange
 				event << [value: sendValue, unit: temperatureScale, isStateChange: isChange, displayed: isDisplayed]
 			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
-				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
+				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
 				event << [value: sendValue, unit: temperatureScale, displayed: false]
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
 				isChange = isStateChange(device, name, value.toString())
@@ -251,6 +253,7 @@ void setCoolingSetpoint(setpoint) {
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
+
 	if (coolingSetpoint > maxCoolingSetpoint) {
 		coolingSetpoint = maxCoolingSetpoint
 	} else if (coolingSetpoint < minCoolingSetpoint) {
@@ -280,6 +283,7 @@ void setCoolingSetpoint(setpoint) {
 }
 
 void resumeProgram() {
+
 	log.debug "resumeProgram() is called"
 	sendEvent("name":"thermostatStatus", "value":"resuming schedule", "description":statusText, displayed: false)
 	def deviceId = device.deviceNetworkId.split(/\./).last()
@@ -350,6 +354,7 @@ def switchFanMode() {
 }
 
 def switchToFanMode(nextMode) {
+
 	log.debug "switching to fan mode: $nextMode"
 	def returnCommand
 
@@ -515,56 +520,63 @@ def fanAuto() {
 }
 
 def generateSetpointEvent() {
+
 	log.debug "Generate SetPoint Event"
 
 	def mode = device.currentValue("thermostatMode")
+	log.debug "Current Mode = ${mode}"
 
 	def heatingSetpoint = device.currentValue("heatingSetpoint")
+	log.debug "Heating Setpoint = ${heatingSetpoint}"
+
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
+	log.debug "Cooling Setpoint = ${coolingSetpoint}"
+
 	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
-	if(location.temperatureScale == "C") {
+	if(location.temperatureScale == "C")
-		maxHeatingSetpoint = maxHeatingSetpoint > 40 ? roundC(convertFtoC(maxHeatingSetpoint)) : roundC(maxHeatingSetpoint)
+	{
-		maxCoolingSetpoint = maxCoolingSetpoint > 40 ? roundC(convertFtoC(maxCoolingSetpoint)) : roundC(maxCoolingSetpoint)
+		maxHeatingSetpoint = roundC(maxHeatingSetpoint)
-		minHeatingSetpoint = minHeatingSetpoint > 40 ? roundC(convertFtoC(minHeatingSetpoint)) : roundC(minHeatingSetpoint)
+		maxCoolingSetpoint = roundC(maxCoolingSetpoint)
-		minCoolingSetpoint = minCoolingSetpoint > 40 ? roundC(convertFtoC(minCoolingSetpoint)) : roundC(minCoolingSetpoint)
+		minHeatingSetpoint = roundC(minHeatingSetpoint)
-		heatingSetpoint = heatingSetpoint > 40 ? roundC(convertFtoC(heatingSetpoint)) : roundC(heatingSetpoint)
+		minCoolingSetpoint = roundC(minCoolingSetpoint)
-		coolingSetpoint = coolingSetpoint > 40 ? roundC(convertFtoC(coolingSetpoint)) : roundC(coolingSetpoint)
+		heatingSetpoint = roundC(heatingSetpoint)
-	} else {
+		coolingSetpoint = roundC(coolingSetpoint)
-		maxHeatingSetpoint = maxHeatingSetpoint < 40 ? roundC(convertCtoF(maxHeatingSetpoint)) : maxHeatingSetpoint
-		maxCoolingSetpoint = maxCoolingSetpoint < 40 ? roundC(convertCtoF(maxCoolingSetpoint)) : maxCoolingSetpoint
-		minHeatingSetpoint = minHeatingSetpoint < 40 ? roundC(convertCtoF(minHeatingSetpoint)) : minHeatingSetpoint
-		minCoolingSetpoint = minCoolingSetpoint < 40 ? roundC(convertCtoF(minCoolingSetpoint)) : minCoolingSetpoint
-		heatingSetpoint = heatingSetpoint < 40 ? roundC(convertCtoF(heatingSetpoint)) : heatingSetpoint
-		coolingSetpoint = coolingSetpoint < 40 ? roundC(convertCtoF(coolingSetpoint)) : coolingSetpoint
 	}
 
-	log.debug "Current Mode = ${mode}"
-	log.debug "Heating Setpoint = ${heatingSetpoint}"
-	log.debug "Cooling Setpoint = ${coolingSetpoint}"
 
 	sendEvent("name":"maxHeatingSetpoint", "value":maxHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"maxCoolingSetpoint", "value":maxCoolingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minHeatingSetpoint", "value":minHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minCoolingSetpoint", "value":minCoolingSetpoint, "unit":location.temperatureScale)
-	sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+
-	sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
 
 	if (mode == "heat") {
+
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+
 	}
 	else if (mode == "cool") {
+
 		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
+
 	} else if (mode == "auto") {
+
 		sendEvent("name":"thermostatSetpoint", "value":"Auto")
+
 	} else if (mode == "off") {
+
 		sendEvent("name":"thermostatSetpoint", "value":"Off")
+
 	} else if (mode == "auxHeatOnly") {
+
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+
 	}
+
 }
 
 void raiseSetpoint() {
@@ -573,31 +585,21 @@ void raiseSetpoint() {
 	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 
+
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow raiseSetpoint"
 	} else {
-
 		def heatingSetpoint = device.currentValue("heatingSetpoint")
 		def coolingSetpoint = device.currentValue("coolingSetpoint")
 		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
-
-		if (location.temperatureScale == "C") {
-			maxHeatingSetpoint = maxHeatingSetpoint > 40 ? convertFtoC(maxHeatingSetpoint) : maxHeatingSetpoint
-			maxCoolingSetpoint = maxCoolingSetpoint > 40 ? convertFtoC(maxCoolingSetpoint) : maxCoolingSetpoint
-			heatingSetpoint = heatingSetpoint > 40 ? convertFtoC(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint > 40 ? convertFtoC(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint > 40 ? convertFtoC(thermostatSetpoint) : thermostatSetpoint
-		} else {
-			maxHeatingSetpoint = maxHeatingSetpoint < 40 ? convertCtoF(maxHeatingSetpoint) : maxHeatingSetpoint
-			maxCoolingSetpoint = maxCoolingSetpoint < 40 ? convertCtoF(maxCoolingSetpoint) : maxCoolingSetpoint
-			heatingSetpoint = heatingSetpoint < 40 ? convertCtoF(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint < 40 ? convertCtoF(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint < 40 ? convertCtoF(thermostatSetpoint) : thermostatSetpoint
-		}
-
 		log.debug "raiseSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
 
-		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
+		if (device.latestState('thermostatSetpoint')) {
+			targetvalue = device.latestState('thermostatSetpoint').value
+			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
+		} else {
+			targetvalue = 0
+		}
 		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
 		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue > maxHeatingSetpoint) {
@@ -620,29 +622,20 @@ void lowerSetpoint() {
 	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
+
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow lowerSetpoint"
 	} else {
 		def heatingSetpoint = device.currentValue("heatingSetpoint")
 		def coolingSetpoint = device.currentValue("coolingSetpoint")
 		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
-
-		if (location.temperatureScale == "C") {
-			minHeatingSetpoint = minHeatingSetpoint > 40 ? convertFtoC(minHeatingSetpoint) : minHeatingSetpoint
-			minCoolingSetpoint = minCoolingSetpoint > 40 ? convertFtoC(minCoolingSetpoint) : minCoolingSetpoint
-			heatingSetpoint = heatingSetpoint > 40 ? convertFtoC(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint > 40 ? convertFtoC(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint > 40 ? convertFtoC(thermostatSetpoint) : thermostatSetpoint
-		} else {
-			minHeatingSetpoint = minHeatingSetpoint < 40 ? convertCtoF(minHeatingSetpoint) : minHeatingSetpoint
-			minCoolingSetpoint = minCoolingSetpoint < 40 ? convertCtoF(minCoolingSetpoint) : minCoolingSetpoint
-			heatingSetpoint = heatingSetpoint < 40 ? convertCtoF(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint < 40 ? convertCtoF(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint < 40 ? convertCtoF(thermostatSetpoint) : thermostatSetpoint
-		}
 		log.debug "lowerSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
-
+		if (device.latestState('thermostatSetpoint')) {
-		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
+			targetvalue = device.latestState('thermostatSetpoint').value
+			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
+		} else {
+			targetvalue = 0
+		}
 		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
 		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue < minHeatingSetpoint) {
@@ -660,6 +653,7 @@ void lowerSetpoint() {
 
 //called by raiseSetpoint() and lowerSetpoint()
 void alterSetpoint(temp) {
+
 	def mode = device.currentValue("thermostatMode")
 
 	if (mode == "off" || mode == "auto") {
@@ -672,18 +666,6 @@ void alterSetpoint(temp) {
 		def targetHeatingSetpoint
 		def targetCoolingSetpoint
 
-		def temperatureScaleHasChanged = false
-
-		if (location.temperatureScale == "C") {
-			if ( heatingSetpoint > 40.0 || coolingSetpoint > 40.0 ) {
-				temperatureScaleHasChanged = true
-			}
-		} else {
-			if ( heatingSetpoint < 40.0 || coolingSetpoint < 40.0 ) {
-				temperatureScaleHasChanged = true
-			}
-		}
-
 		//step1: check thermostatMode, enforce limits before sending request to cloud
 		if (mode == "heat" || mode == "auxHeatOnly"){
 			if (temp.value > coolingSetpoint){
@@ -725,18 +707,17 @@ void alterSetpoint(temp) {
 				sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
 			}
 		}
-
-		if ( temperatureScaleHasChanged )
-			generateSetpointEvent()
 		generateStatusEvent()
 	}
 }
 
 def generateStatusEvent() {
+
 	def mode = device.currentValue("thermostatMode")
 	def heatingSetpoint = device.currentValue("heatingSetpoint")
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
 	def temperature = device.currentValue("temperature")
+
 	def statusText
 
 	log.debug "Generate Status Event for Mode = ${mode}"
@@ -746,25 +727,36 @@ def generateStatusEvent() {
 	log.debug "HVAC Mode = ${mode}"
 
 	if (mode == "heat") {
+
 		if (temperature >= heatingSetpoint)
 			statusText = "Right Now: Idle"
 		else
 			statusText = "Heating to ${heatingSetpoint} ${location.temperatureScale}"
+
 	} else if (mode == "cool") {
+
 		if (temperature <= coolingSetpoint)
 			statusText = "Right Now: Idle"
 		else
 			statusText = "Cooling to ${coolingSetpoint} ${location.temperatureScale}"
-	} else if (mode == "auto") {
-		statusText = "Right Now: Auto"
-	} else if (mode == "off") {
-		statusText = "Right Now: Off"
-	} else if (mode == "auxHeatOnly") {
-		statusText = "Emergency Heat"
-	} else {
-		statusText = "?"
-	}
 
+	} else if (mode == "auto") {
+
+		statusText = "Right Now: Auto"
+
+	} else if (mode == "off") {
+
+		statusText = "Right Now: Off"
+
+	} else if (mode == "auxHeatOnly") {
+
+		statusText = "Emergency Heat"
+
+	} else {
+
+		statusText = "?"
+
+	}
 	log.debug "Generate Status Event = ${statusText}"
 	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
 }
@@ -778,7 +770,7 @@ def roundC (tempC) {
 }
 
 def convertFtoC (tempF) {
-	return ((Math.round(((tempF - 32)*(5/9)) * 2))/2).toDouble()
+	return String.format("%.1f", (Math.round(((tempF - 32)*(5/9)) * 2))/2)
 }
 
 def convertCtoF (tempC) {

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,7 +57,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes
@@ -172,3 +172,6 @@ def verifyPercent(percent) {
     }
 }
 
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -45,7 +45,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes
@@ -87,3 +87,6 @@ def parse(description) {
 	results
 }
 
+def ping() {
+	log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,7 +66,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes
@@ -188,3 +188,6 @@ def verifyPercent(percent) {
     }
 }
 
+def ping() {
+    log.trace "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,7 +50,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes
@@ -93,3 +93,6 @@ void refresh() {
 	parent.manualRefresh()
 }
 
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,7 +55,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes
@@ -107,3 +107,6 @@ void refresh() {
     parent.manualRefresh()
 }
 
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -141,6 +141,7 @@ def setLevel(percentage) {
 		percentage = 1 // clamp to 1%
 	}
 	if (percentage == 0) {
+		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -71,6 +71,7 @@ def setLevel(percentage) {
 		percentage = 1 // clamp to 1%
 	}
 	if (percentage == 0) {
+		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -143,7 +143,7 @@ def refresh() {
 def configure() {
 	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
 	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
 	refresh() + zigbee.onOffConfig(0, 300) + powerConfig()

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -264,6 +264,7 @@ def refresh()
 {
 	log.debug "refresh temperature, humidity, and battery"
 	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
+			zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0x104E]) +  // New firmware
 			zigbee.readAttribute(0x0402, 0x0000) +
 			zigbee.readAttribute(0x0001, 0x0020)
 }

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -104,7 +104,7 @@ def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -28,8 +28,8 @@ metadata {
 		capability "Switch Level"
 		capability "Health Check"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB"
 	}
 
 	// UI tile definitions

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -145,7 +145,7 @@ def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     refresh()

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -128,7 +128,7 @@ def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     refresh()

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -387,18 +387,18 @@ def getDeviceList() {
 	state.deviceDetail = [:]
 	state.deviceState = [:]
 
-	apiGet("/api/devicelist") { response ->
+	apiGet("/api/getstationsdata") { response ->
 		response.data.body.devices.each { value ->
 			def key = value._id
 			deviceList[key] = "${value.station_name}: ${value.module_name}"
 			state.deviceDetail[key] = value
             state.deviceState[key] = value.dashboard_data
+			value.modules.each { value2 ->            
+                def key2 = value2._id
+                deviceList[key2] = "${value.station_name}: ${value2.module_name}"
+                state.deviceDetail[key2] = value2
+                state.deviceState[key2] = value2.dashboard_data            
             }
-		response.data.body.modules.each { value ->
-			def key = value._id
-			deviceList[key] = "${state.deviceDetail[value.main_device].station_name}: ${value.module_name}"
-			state.deviceDetail[key] = value
-            state.deviceState[key] = value.dashboard_data
 		}
 	}
 

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -37,10 +37,7 @@ preferences {
 
 def mainPage() {
 	def bridges = bridgesDiscovered()
-
+	if (state.username && bridges) {
-	if (state.refreshUsernameNeeded) {
-		return bridgeLinking()
-	} else if (state.username && bridges) {
 		return bulbDiscovery()
 	} else {
 		return bridgeDiscovery()
@@ -107,20 +104,11 @@ def bridgeLinking() {
 	def title = "Linking with your Hue"
     def paragraphText
 	if (selectedHue) {
-		if (state.refreshUsernameNeeded) {
-			paragraphText = "The current Hue username is invalid.\n\nPlease press the button on your Hue Bridge to re-link. "
-		} else {
 		paragraphText = "Press the button on your Hue Bridge to setup a link. "
-		}
     } else {
     	paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
     }
 	if (state.username) { //if discovery worked
-		if (state.refreshUsernameNeeded) {
-			state.refreshUsernameNeeded = false
-			// Issue one poll with new username to cancel local polling with old username
-			poll()
-		}
 		nextPage = "bulbDiscovery"
 		title = "Success!"
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
@@ -299,7 +287,6 @@ def initialize() {
     state.bridgeRefreshCount = 0
     state.bulbRefreshCount = 0
 	state.updating = false
-	setupDeviceWatch()
 	if (selectedHue) {
    		addBridge()
         addBulbs()
@@ -322,14 +309,6 @@ def uninstalled(){
 	state.username = null
 }
 
-private setupDeviceWatch() {
-	def hub = location.hubs[0]
-	// Make sure that all child devices are enrolled in device watch
-	getChildDevices().each {
-		it.sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${hub?.hub?.hardwareID}\"}")
-	}
-}
-
 private upgradeDeviceType(device, newHueType) {
 	def deviceType = getDeviceType(newHueType)
 
@@ -378,6 +357,7 @@ def addBulbs() {
 					if (d) {
 						log.debug "created ${d.displayName} with id $dni"
 						d.completedSetup = true
+						d.refresh()
 					}
 				} else {
 					log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
@@ -434,11 +414,9 @@ def addBridge() {
 					d.completedSetup = true
 					log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
 					def childDevice = getChildDevice(d.deviceNetworkId)
-					childDevice?.sendEvent(name: "status", value: "Online")
-					childDevice?.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false, isStateChange: true)
 					updateBridgeStatus(childDevice)
+					childDevice.sendEvent(name: "idNumber", value: idNumber)
 
-					childDevice?.sendEvent(name: "idNumber", value: idNumber)
 					if (vbridge.value.ip && vbridge.value.port) {
 						if (vbridge.value.ip.contains(".")) {
 							childDevice.sendEvent(name: "networkAddress", value: vbridge.value.ip + ":" +  vbridge.value.port)
@@ -715,14 +693,10 @@ def doDeviceSync(){
 private void updateBridgeStatus(childDevice) {
 	// Update activity timestamp if child device is a valid bridge
 	def vbridges = getVerifiedHueBridges()
-	def vbridge = vbridges.find {
+	def vbridge = vbridges.find {"${it.value.mac}".toUpperCase() == childDevice?.device?.deviceNetworkId?.toUpperCase()}
-		"${it.value.mac}".toUpperCase() == childDevice?.device?.deviceNetworkId?.toUpperCase()
-	}
 	vbridge?.value?.lastActivity = now()
-	if (vbridge && childDevice?.device?.currentValue("status") == "Offline") {
+	if(vbridge) {
-		log.debug "$childDevice is back Online"
 		childDevice?.sendEvent(name: "status", value: "Online")
-		childDevice?.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false, isStateChange: true)
 	}
 }
 
@@ -744,24 +718,16 @@ private void checkBridgeStatus() {
 		    }
 
 			if (it.value.lastActivity < time) { // it.value.lastActivity != null &&
-				if (d.currentStatus == "Online") {
+				log.warn "Bridge $it.value.idNumber is Offline"
-					log.warn "$d is Offline"
 				d.sendEvent(name: "status", value: "Offline")
-					d.sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false, isStateChange: true)
 
-					Calendar currentTime = Calendar.getInstance()
+				state.bulbs?.each {
+					it.value.online = false
+				}
 				getChildDevices().each {
-						def id = getId(it)
+					it.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", isStateChange: true, displayed: false)
-						if (state.bulbs[id]?.online == true) {
-							state.bulbs[id]?.online = false
-							state.bulbs[id]?.unreachableSince = currentTime.getTimeInMillis()
-							it.sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false, isStateChange: true)
 				}
-					}
+			} else {
-				}
-			} else if (d.currentStatus == "Offline") {
-				log.debug "$d is back Online"
-				d.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false, isStateChange: true)
 				d.sendEvent(name: "status", value: "Online")//setOnline(false)
 			}
 		}
@@ -949,15 +915,8 @@ private handleCommandResponse(body) {
 					updates[childDeviceNetworkId]."$eventType" = v
 				}
 			}
-		} else if (payload?.error) {
+		} else if (payload.error) {
-			log.warn "Error returned from Hue bridge, error = ${payload?.error}"
+			log.warn "Error returned from Hue bridge error = ${body?.error}"
-			// Check for unauthorized user
-			if (payload?.error?.type?.value == 1) {
-				log.error "Hue username is not valid"
-				state.refreshUsernameNeeded = true
-				state.username = null
-			}
-			return []
 		}
 	}
 
@@ -965,10 +924,13 @@ private handleCommandResponse(body) {
 	updates.each { childDeviceNetworkId, params ->
 		def device = getChildDevice(childDeviceNetworkId)
 		def id = getId(device)
+		// If device is offline, then don't send events which will update device watch
+		if (isOnline(id)) {
 			sendBasicEvents(device, "on", params.on)
 			sendBasicEvents(device, "bri", params.bri)
 			sendColorEvents(device, params.xy, params.hue, params.sat, params.ct)
 		}
+	}
 	return []
 }
 
@@ -1003,35 +965,36 @@ private handlePoll(body) {
 		def device = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}
 		if (device) {
 			if (bulb.value.state?.reachable) {
-				if (state.bulbs[bulb.key]?.online == false || state.bulbs[bulb.key]?.online == null) {
+				if (state.bulbs[bulb.key]?.online == false) {
 					// light just came back online, notify device watch
-					device.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false, isStateChange: true)
+					def lastActivity = now()
+					device.sendEvent(name: "deviceWatch-status", value: "ONLINE", description: "Last Activity is on ${new Date((long) lastActivity)}", displayed: false, isStateChange: true)
 					log.debug "$device is Online"
 				}
 				// Mark light as "online"
 				state.bulbs[bulb.key]?.unreachableSince = null
 				state.bulbs[bulb.key]?.online = true
-			} else {
+
-				if (state.bulbs[bulb.key]?.unreachableSince == null) {
-					// Store the first time where device was reported as "unreachable"
-					state.bulbs[bulb.key]?.unreachableSince = currentTime.getTimeInMillis()
-				}
-				if (state.bulbs[bulb.key]?.online || state.bulbs[bulb.key]?.online == null) {
-					// Check if device was "unreachable" for more than 11 minutes and mark "offline" if necessary
-					if (state.bulbs[bulb.key]?.unreachableSince < time11.getTimeInMillis() || state.bulbs[bulb.key]?.online == null) {
-						log.warn "$device went Offline"
-						state.bulbs[bulb.key]?.online = false
-						device.sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false, isStateChange: true)
-					}
-				}
-				log.warn "$device may not reachable by Hue bridge"
-			}
 				// If user just executed commands, then do not send events to avoid confusing the turning on/off state
 				if (!state.updating) {
 					sendBasicEvents(device, "on", bulb.value?.state?.on)
 					sendBasicEvents(device, "bri", bulb.value?.state?.bri)
 					sendColorEvents(device, bulb.value?.state?.xy, bulb.value?.state?.hue, bulb.value?.state?.sat, bulb.value?.state?.ct, bulb.value?.state?.colormode)
 				}
+			} else {
+				if (state.bulbs[bulb.key]?.unreachableSince == null) {
+					// Store the first time where device was reported as "unreachable"
+					state.bulbs[bulb.key]?.unreachableSince = currentTime.getTimeInMillis()
+				} else if (state.bulbs[bulb.key]?.online) {
+					// Check if device was "unreachable" for more than 11 minutes and mark "offline" if necessary
+					if (state.bulbs[bulb.key]?.unreachableSince < time11.getTimeInMillis()) {
+						log.warn "$device went Offline"
+						state.bulbs[bulb.key]?.online = false
+						device.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", displayed: false, isStateChange: true)
+					}
+				}
+				log.warn "$device may not reachable by Hue bridge"
+			}
 		}
 	}
 	return []
@@ -1198,6 +1161,22 @@ def setColor(childDevice, huesettings) {
 	return "Setting color to $value"
 }
 
+def ping(childDevice) {
+	if (childDevice.device?.deviceNetworkId?.equalsIgnoreCase(selectedHue)) {
+		if (childDevice.device?.currentValue("status")?.equalsIgnoreCase("Online")) {
+			childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Bridge is reachable", displayed: false, isStateChange: true)
+			return "Bridge is Online"
+		} else {
+			return "Bridge is Offline"
+		}
+	} else if (isOnline(getId(childDevice))) {
+		childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Light is reachable", displayed: false, isStateChange: true)
+		return "Device is Online"
+	} else {
+		return "Device is Offline"
+	}
+}
+
 private getId(childDevice) {
 	if (childDevice.device?.deviceNetworkId?.startsWith("HUE")) {
 		return childDevice.device?.deviceNetworkId[3..-1]
@@ -1787,4 +1766,3 @@ def hsvToHex(hue, sat, value = 100){
 
 	return "#$r1$g1$b1"
 }
-