MSA-1554: Smartapps is available in association with SLEEPsense DTH.

I was doing this work wiht  Jenny.

e-mail : jihyouk.choi@samsung.com
name : jihyouk-Choi

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -11,9 +11,9 @@ metadata {
 		capability "Color Temperature"
 		capability "Switch"
 		capability "Switch Level" // brightness
-		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 	}
 
 	simulator {
@@ -23,7 +23,6 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
 				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
 				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
@@ -64,12 +63,8 @@ metadata {
 	}
 }
 
-// parse events into attributes
+void installed() {
-def parse(String description) {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
-	if (description == 'updated') {
-		return // don't poll when config settings is being updated as it may time out
-	}
-	poll()
 }
 
 // handle commands
@@ -192,14 +187,17 @@ def off() {
 	return []
 }
 
-def poll() {
+def refresh() {
-	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
+	log.debug "Executing 'refresh'"
+	
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
-		sendEvent(name: "switch", value: "unreachable")
+		state.online = false
+		sendEvent(name: "DeviceWatch-DeviceStatusUpdate", value: "offline", displayed: false)
+ 		log.warn "$device is Offline"
 		return []
 	} else if (resp.status != 200) {
-		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
+		log.error("Unexpected result in refresh(): [${resp.status}] ${resp.data}")
 		return []
 	}
 	def data = resp.data[0]
@@ -208,19 +206,20 @@ def poll() {
 	sendEvent(name: "label", value: data.label)
 	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
 	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
-	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
+	sendEvent(name: "switch", value: data.power)
 	sendEvent(name: "color", value: colorUtil.hslToHex((data.color.hue / 3.6) as int, (data.color.saturation * 100) as int))
 	sendEvent(name: "hue", value: data.color.hue / 3.6)
 	sendEvent(name: "saturation", value: data.color.saturation * 100)
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
-	sendEvent(name: "model", value: "${data.product.company} ${data.product.name}")
+	sendEvent(name: "model", value: data.product.name)
 
-	return []
+	if (data.connected) {
+		sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false)
+		log.debug "$device is Online"
+	} else {
+		sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false)
+		log.warn "$device is Offline"
 }
-
-def refresh() {
-	log.debug "Executing 'refresh'"
-	poll()
 }
 
 def selector() {

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -10,9 +10,9 @@ metadata {
 		capability "Color Temperature"
 		capability "Switch"
 		capability "Switch Level" // brightness
-		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 	}
 
 	simulator {
@@ -22,13 +22,12 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
 				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
 				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
-
 			}
+
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel"
 			}
@@ -53,15 +52,10 @@ metadata {
 		main "switch"
 		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
 	}
-
 }
 
-// parse events into attributes
+void installed() {
-def parse(String description) {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
-	if (description == 'updated') {
-		return // don't poll when config settings is being updated as it may time out
-	}
-	poll()
 }
 
 // handle commands
@@ -122,14 +116,17 @@ def off() {
 	return []
 }
 
-def poll() {
+def refresh() {
-	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
+	log.debug "Executing 'refresh'"
+	
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
-		sendEvent(name: "switch", value: "unreachable")
+		state.online = false
+		sendEvent(name: "DeviceWatch-DeviceStatusUpdate", value: "offline", displayed: false)
+		log.warn "$device is Offline"
 		return []
 	} else if (resp.status != 200) {
-		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
+		log.error("Unexpected result in refresh(): [${resp.status}] ${resp.data}")
 		return []
 	}
 	def data = resp.data[0]
@@ -137,16 +134,17 @@ def poll() {
 	sendEvent(name: "label", value: data.label)
 	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
 	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
-	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
+	sendEvent(name: "switch", value: data.power)
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
 	sendEvent(name: "model", value: data.product.name)
 
-	return []
+	if (data.connected) {
+		sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false)
+		log.debug "$device is Online"
+	} else {
+		sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false)
+		log.warn "$device is Offline"
 	}
-
-def refresh() {
-	log.debug "Executing 'refresh'"
-	poll()
 }
 
 def selector() {

devicetypes/smartthings/zwave-switch-generic.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-switch-generic.src/README.md

@@ -0,0 +1,39 @@
+# Z-wave Switch
+
+
+
+Works with: 
+
+* [Leviton Appliance Module (DZPA1-1LW)](https://support.smartthings.com/hc/en-us/articles/205881176-Leviton-Appliance-Module-DZPA1-1LW-)
+* [GE Plug-In Outdoor Smart Switch (GE 12720) (Z-Wave)](https://support.smartthings.com/hc/en-us/articles/200903080-GE-Plug-In-Outdoor-Smart-Switch-GE-12720-Z-Wave-)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Health Check** - indicates ability to get device health notifications
+* **Switch** - can detect state (possible values: on/off)
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+
+## Device Health
+
+A Category C5 Leviton Appliance Module (DZPA1-1LW) and GE Plug-In Outdoor Smart Switch (GE 12720) (Z-Wave) polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Leviton Appliance Module (DZPA1-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205881176-Leviton-Appliance-Module-DZPA1-1LW-)
+* [GE Plug-In Outdoor Smart Switch (GE 12720) (Z-Wave) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200903080-GE-Plug-In-Outdoor-Smart-Switch-GE-12720-Z-Wave-)

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -14,12 +14,15 @@
 metadata {
 	definition (name: "Z-Wave Switch Generic", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
+		capability "Health Check"
  		capability "Switch"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
 		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
+		fingerprint mfr:"001D", prod:"1A02", deviceJoinName: "Z-Wave Switch"
+		fingerprint mfr:"0063", prod:"4F50", deviceJoinName: "Z-Wave Switch"
 	}
 
 	// simulator metadata
@@ -50,6 +53,11 @@ metadata {
 	}
 }
 
+def updated(){
+// Device-Watch simply pings if no device events received for checkInterval duration of 32min = 2 * 15min + 2min lag time
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description) {
 	def result = null
 	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
@@ -126,6 +134,13 @@ def poll() {
 	])
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	delayBetween([
 		zwave.switchBinaryV1.switchBinaryGet().format(),

smartapps/smartsolutionsv2/sleeping/sleep-routine.src/sleep-routine.groovy

@@ -0,0 +1,113 @@
+/**
+ *  Sleep Wizard
+ *
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Sleep Routine",
+    namespace: "smartsolutionsv2/sleeping",
+    author: "SmartThings",
+    description: "Create rules to control devices based on a sleep sensor, including in bed, out of bed, sleeping, and not sleeping.",
+    category: "My Apps",
+    iconUrl: "https://s3.amazonaws.com/smartthings-plus/category-icons/sleepsense.png",
+    iconX2Url: "https://s3.amazonaws.com/smartthings-plus/category-icons/sleepsense.png",
+    iconX3Url: "https://s3.amazonaws.com/smartthings-plus/category-icons/sleepsense.png",
+    singleInstance: true
+)
+
+preferences {
+	page(name: "main", title: getLabel("str_Title"), install: true, uninstall: true) {
+    	section {
+        	app(name: "smartsleepautomation", appName: "Smart Sleep Automation", namespace: "smartsolutionsv2/sleeping", title: getLabel("str_SectionTitle"), multiple: true, uninstall: true)
+        }
+    }
+}
+
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	initialize()
+}
+
+def initialize() {
+    
+    updateSolutionSummary();
+}
+
+def updateSolutionSummary() {
+	def numChildApps = getChildApps().size();
+    def text = "${numChildApps} rules configured";
+    sendEvent(
+    	linkText: numChildApps.toString(),
+        descriptionText: next,
+        eventType: "SOLUTION_SUMMARY",
+        name: "summary",
+        value: numChildApps,
+        data: [["icon": "indicator-dot-gray", "iconColor": "#878787", "value":text]],
+        displayed: false
+    );
+}
+
+
+card("Action History") { 
+     tiles { 
+         eventTile { }
+ 
+     } 
+ } 
+
+
+
+def getLabel(value)
+{
+    def str_Title=[
+            "kr": "룰",
+            "us": "Rules"
+    ]
+
+    def str_SectionTitle=[
+            "kr": "새로운 자동화 룰 만들기",
+            "us": "New Sleep Routine Automation"
+    ]
+
+    
+    def lang = "us"
+
+    if(lang == "ko") //clientLocale?.language
+    {
+        switch(value)
+        {
+            case "str_Title":
+                return str_Title["kr"]
+            case "str_SectionTitle":
+                return str_SectionTitle["kr"]
+        }
+    }
+    else
+    {
+        switch(value)
+        {
+            case "str_Title":
+                return str_Title["us"]
+            case "str_SectionTitle":
+                return str_SectionTitle["us"]
+        }
+    }
+    return "Unknown"
+}
+

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -242,8 +242,6 @@ def installed() {
 	} else {
 		initialize()
 	}
-	// Check for new devices and remove old ones every 3 hours
-	runEvery3Hours('updateDevices')
 }
 
 // called after settings are changed
@@ -271,9 +269,19 @@ private removeChildDevices(devices) {
 def initialize() {
 	log.debug "initialize"
 	updateDevices()
+	// Check for new devices and remove old ones every 3 hours
+	runEvery5Minutes('updateDevices')
+	setupDeviceWatch()
 }
 
 // Misc
+private setupDeviceWatch() {
+	def hub = location.hubs[0]
+	// Make sure that all child devices are enrolled in device watch
+	getChildDevices().each {
+		it.sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${hub?.hub?.hardwareID}\"}")
+	}
+}
 
 Map apiRequestHeaders() {
 	return ["Authorization": "Bearer ${state.lifxAccessToken}",
@@ -376,7 +384,7 @@ def updateDevices() {
 			def data = [
 					label: device.label,
 					level: Math.round((device.brightness ?: 1) * 100),
-					switch: device.connected ? device.power : "unreachable",
+					switch: device.power,
 					colorTemperature: device.color.kelvin
 			]
 			if (device.product.capabilities.has_color) {
@@ -387,18 +395,42 @@ def updateDevices() {
 			} else {
 				childDevice = addChildDevice(app.namespace, "LIFX White Bulb", device.id, null, data)
 			}
+			childDevice?.completedSetup = true
+		} else {
+			if (device.product.capabilities.has_color) {
+				sendEvent(name: "color", value: colorUtil.hslToHex((device.color.hue / 3.6) as int, (device.color.saturation * 100) as int))
+				sendEvent(name: "hue", value: device.color.hue / 3.6)
+				sendEvent(name: "saturation", value: device.color.saturation * 100)
 			}
+			childDevice.sendEvent(name: "label", value: device.label)
+			childDevice.sendEvent(name: "level", value: Math.round((device.brightness ?: 1) * 100))
+			childDevice.sendEvent(name: "switch.setLevel", value: Math.round((device.brightness ?: 1) * 100))
+			childDevice.sendEvent(name: "switch", value: device.power)
+			childDevice.sendEvent(name: "colorTemperature", value: device.color.kelvin)
+			childDevice.sendEvent(name: "model", value: device.product.name)
+		}
+
+		if (state.devices[device.id] == null) {
+			// State missing, add it and set it to opposite status as current status to provoke event below
+			state.devices[device.id] = [online : !device.connected]
+		}
+
+		if (!state.devices[device.id]?.online && device.connected) {
+			// Device came online after being offline
+			childDevice?.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false)
+			log.debug "$device is back Online"
+		} else if (state.devices[device.id]?.online && !device.connected) {
+			// Device went offline after being online
+			childDevice?.sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false)
+			log.debug "$device went Offline"
+		}
+		state.devices[device.id] = [online: device.connected]
 	}
 	getChildDevices().findAll { !selectors.contains("${it.deviceNetworkId}") }.each {
 		log.info("Deleting ${it.deviceNetworkId}")
+		state.devices[it.deviceNetworkId] = null
 		deleteChildDevice(it.deviceNetworkId)
 	}
-	runIn(1, 'refreshDevices') // Asynchronously refresh devices so we don't block
 }
 
-def refreshDevices() {
+
-	log.info("Refreshing all devices...")
-	getChildDevices().each { device ->
-		device.refresh()
-	}
-}