Modifying 'Publish a SmartApp for OpenT2T - Remove support for multiple subscriptions to a single device.'

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -120,15 +120,6 @@ def configure() {
 	return cmd
 }
 
-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -109,15 +109,6 @@ def configure() {
 	return cmds
 }
 
-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -11,6 +11,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+ 
 metadata {
     definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
         capability "Tone"
@@ -59,7 +60,7 @@ def updated() {
 }
 
 def configure() {
-    def cmds = zigbee.batteryConfig(20, 20, 0x01)
+    def cmds = zigbee.configureReporting(0x0001, 0x0020, 0x20, 20, 20, 0x01)
     log.debug "configure -- cmds: ${cmds}"
     return cmds
 }

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -27,7 +27,7 @@ metadata {
         capability "Switch"
         capability "Refresh"
         capability "Music Player"
-        capability "Health Check"
+        capability "Polling"
 
         /**
          * Define all commands, ie, if you have a custom action not
@@ -236,33 +236,7 @@ def parse(String event) {
  * @return action(s) to take or null
  */
 def installed() {
-    // Notify health check about this device with timeout interval 12 minutes
+    onAction("refresh")
-    sendEvent(name: "checkInterval", value: 12 * 60, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
-    startPoll()
-}
-
-/**
- * Called by health check if no events been generated in the last 12 minutes
- * If device doesn't respond it will be marked offline (not available)
- */
-def ping() {
-    TRACE("ping")
-    boseSendGetNowPlaying()
-}
-
-/**
- * Schedule a 2 minute poll of the device to refresh the
- * tiles so the user gets the correct information.
- */
-def startPoll() {
-    TRACE("startPoll")
-    unschedule()
-    // Schedule 2 minute polling of speaker status (song average length is 3-4 minutes)
-    def sec = Math.round(Math.floor(Math.random() * 60))
-    //def cron = "$sec 0/5 * * * ?" // every 5 min
-    def cron = "$sec 0/2 * * * ?" // every 2 min
-    log.debug "schedule('$cron', boseSendGetNowPlaying)"
-    schedule(cron, boseSendGetNowPlaying)
 }
 
 /**
@@ -342,6 +316,14 @@ def onAction(String user, data=null) {
     return actions
 }
 
+/**
+ * Called every so often (every 5 minutes actually) to refresh the
+ * tiles so the user gets the correct information.
+ */
+def poll() {
+    return boseRefreshNowPlaying()
+}
+
 /**
  * Joins this speaker into the everywhere zone
  */
@@ -855,10 +837,6 @@ def boseRefreshNowPlaying(delay=0) {
     return boseGET("/now_playing")
 }
 
-def boseSendGetNowPlaying() {
-    sendHubCommand(boseGET("/now_playing"))
-}
-
 /**
  * Requests the list of presets
  *
@@ -1036,8 +1014,4 @@ def boseGetDeviceID() {
  */
 def getDeviceIP() {
     return parent.resolveDNI2Address(device.deviceNetworkId)
-}
-
-def TRACE(text) {
-    log.trace "${text}"
 }

devicetypes/smartthings/centralite-thermostat.src/centralite-thermostat.groovy

@@ -81,47 +81,51 @@ metadata {
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parse description $description"
-	List result = []
+	def map = [:]
-	def descMap = zigbee.parseDescriptionAsMap(description)
+	if (description?.startsWith("read attr -")) {
-	log.debug "Desc Map: $descMap"
+		def descMap = parseDescriptionAsMap(description)
-	List attrData = [[cluster: descMap.cluster ,attrId: descMap.attrId, value: descMap.value]]
+		log.debug "Desc Map: $descMap"
-	descMap.additionalAttrs.each {
+		if (descMap.cluster == "0201" && descMap.attrId == "0000") {
-	    attrData << [cluster: descMap.cluster, attrId: it.attrId, value: it.value]
-	}
-	attrData.each {
-		def map = [:]
-		if (it.cluster == "0201" && it.attrId == "0000") {
 			log.debug "TEMP"
 			map.name = "temperature"
-			map.value = getTemperature(it.value)
+			map.value = getTemperature(descMap.value)
 			map.unit = temperatureScale
-		} else if (it.cluster == "0201" && it.attrId == "0011") {
+		} else if (descMap.cluster == "0201" && descMap.attrId == "0011") {
 			log.debug "COOLING SETPOINT"
 			map.name = "coolingSetpoint"
-			map.value = getTemperature(it.value)
+			map.value = getTemperature(descMap.value)
 			map.unit = temperatureScale
-		} else if (it.cluster == "0201" && it.attrId == "0012") {
+		} else if (descMap.cluster == "0201" && descMap.attrId == "0012") {
 			log.debug "HEATING SETPOINT"
 			map.name = "heatingSetpoint"
-			map.value = getTemperature(it.value)
+			map.value = getTemperature(descMap.value)
 			map.unit = temperatureScale
-		} else if (it.cluster == "0201" && it.attrId == "001c") {
+		} else if (descMap.cluster == "0201" && descMap.attrId == "001c") {
 			log.debug "MODE"
 			map.name = "thermostatMode"
-			map.value = getModeMap()[it.value]
+			map.value = getModeMap()[descMap.value]
-		} else if (it.cluster == "0202" && it.attrId == "0000") {
+		} else if (descMap.cluster == "0202" && descMap.attrId == "0000") {
 			log.debug "FAN MODE"
 			map.name = "thermostatFanMode"
-			map.value = getFanModeMap()[it.value]
+			map.value = getFanModeMap()[descMap.value]
 		}
-		if (map) {
-			result << createEvent(map)
-		}
-		log.debug "Parse returned $map"
 	}
+
+	def result = null
+	if (map) {
+		result = createEvent(map)
+	}
+	log.debug "Parse returned $map"
 	return result
 }
 
+def parseDescriptionAsMap(description) {
+	(description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+}
+
 def getModeMap() { [
 	"00":"off",
 	"03":"cool",

devicetypes/smartthings/cooper-rf9500.src/cooper-rf9500.groovy

@@ -183,15 +183,6 @@ def updateState(String name, String value) {
 	device.updateDataValue(name, value)
 }
 
-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 3)
 }

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -23,7 +23,6 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
-        capability "Light"
 
         fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
     }
@@ -83,7 +82,7 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()       //adding refresh because of ZLL bulb not conforming to send-me-a-report
+    zigbee.setLevel(value) + ["delay 500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
 /**

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -21,12 +21,10 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 
-		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer "
+		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
-		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer "
+		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
-		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "GE Plug-In Smart Dimmer "
+		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "Z-Wave Plug-In Dimmer"
-		fingerprint mfr:"0063", prod:"4944", model:"3034", deviceJoinName: "GE In-Wall Smart Fan Control"
 	}
 
 	simulator {

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -125,7 +125,7 @@ metadata {
 void installed() {
     // The device refreshes every 5 minutes by default so if we miss 2 refreshes we can consider it offline
     // Using 12 minutes because in testing, device health team found that there could be "jitter"
-    sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "cloud"], displayed: false)
+    sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "cloud", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // Device Watch will ping the device to proactively determine if the device has gone offline

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -99,7 +99,7 @@ def parse(String description) {
 
 def poll() {
     def refreshCmds = [
-        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 2000"
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
     ]
 
     return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh()
@@ -197,7 +197,7 @@ def off() {
 
 def refresh() {
     def refreshCmds = [
-        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 2000"
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
     ]
 
     return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig()

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -17,7 +17,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 
 		command "setAdjustedColor"
         command "reset"

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,7 +7,6 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
-		capability "Bridge"
 		capability "Health Check"
 
 		attribute "networkAddress", "string"

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -18,7 +18,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 
 		command "setAdjustedColor"
         command "reset"

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -14,8 +14,7 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Health Check"
+        capability "Health Check"
-		capability "Light"
 
         command "refresh"
 	}

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -16,7 +16,6 @@ metadata {
         capability "Switch"
         capability "Refresh"
         capability "Health Check"
-        capability "Light"
 
         command "refresh"
     }

devicetypes/smartthings/life360-user.src/life360-user.groovy

@@ -39,7 +39,7 @@ metadata {
 }
 
 def generatePresenceEvent(boolean present) {
-	log.info "Life360 generatePresenceEvent($present)"
+	log.debug "Here in generatePresenceEvent!"
 	def value = formatValue(present)
 	def linkText = getLinkText(device)
 	def descriptionText = formatDescriptionText(linkText, present)

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -14,7 +14,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 	}
 
 	simulator {

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -13,7 +13,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 	}
 
 	simulator {

devicetypes/smartthings/mimolite-garage-door-controller.src/mimolite-garage-door-controller.groovy

@@ -36,7 +36,6 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Contact Sensor"
-		capability "Light"
 
 		attribute "powered", "string"
 

devicetypes/smartthings/open-closed-sensor.src/open-closed-sensor.groovy

@@ -40,11 +40,14 @@ metadata {
 
 // Parse incoming device messages to generate events
 def parse(String description) {
-	def resMap
+	def name = null
-	if (description.startsWith("zone")) {
+	def value = description
-		resMap = createEvent(name: "contact", value: zigbee.parseZoneStatus(description).isAlarm1Set() ? "open" : "closed")
+	if (zigbee.isZoneType19(description)) {
+		name = "contact"
+		value = zigbee.translateStatusZoneType19(description) ? "open" : "closed"
 	}
 	
-	log.debug "Parse returned $resMap"
+	def result = createEvent(name: name, value: value)
-	return resMap
+	log.debug "Parse returned ${result?.descriptionText}"
+	return result
 }

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -24,7 +24,6 @@ metadata {
 		capability "Refresh"
 		capability "Actuator"
 		capability "Sensor"
-		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-ZHAC"
 
@@ -70,36 +69,286 @@ metadata {
 def parse(String description) {
 	log.debug "description is $description"
 
-	def event = zigbee.getEvent(description)
+	def event = [:]
-	if (!event) {
+	def finalResult = isKnownDescription(description)
-		log.warn "DID NOT PARSE MESSAGE for description : $description"
+	if (finalResult != "false") {
-		log.debug zigbee.parseDescriptionAsMap(description)
+		log.info finalResult
-	} else if (event.name == "power") {
+		if (finalResult.type == "update") {
-		/*
+			log.info "$device updates: ${finalResult.value}"
-			Dividing by 10 as the Divisor is 10000 and unit is kW for the device. Simplifying to 10 power level is an integer.
+			event = null
-		*/
+		}
-		event.value = event.value / 10
+		else if (finalResult.type == "power") {
-	}
+			def powerValue = (finalResult.value as Integer)/10
+			event = createEvent(name: "power", value: powerValue)
 
-	return event ? createEvent(event) : event
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/
+		}
+		else {
+			event = createEvent(name: finalResult.type, value: finalResult.value)
+		}
+	}
+	else {
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug parseDescriptionAsMap(description)
+	}
+	return event
 }
 
-def setLevel(value) {
+// Commands to device
-	zigbee.setLevel(value)
+def zigbeeCommand(cluster, attribute){
+	"st cmd 0x${device.deviceNetworkId} ${endpointId} ${cluster} ${attribute} {}"
 }
 
 def off() {
-	zigbee.off()
+	zigbeeCommand("6", "0")
 }
 
 def on() {
-	zigbee.on()
+	zigbeeCommand("6", "1")
+}
+
+def setLevel(value) {
+	value = value as Integer
+	if (value == 0) {
+		off()
+	}
+	else {
+		if (device.latestValue("switch") == "off") {
+			sendEvent(name: "switch", value: "on")
+		}
+		sendEvent(name: "level", value: value)
+		setLevelWithRate(value, "0000")		//value is between 0 to 100
+	}
 }
 
 def refresh() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.electricMeasurementPowerRefresh()
+	[
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0B04 0x050B", "delay 500"
+	]
+
 }
 
 def configure() {
-	refresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.electricMeasurementPowerConfig()
+	refresh() + onOffConfig() + levelConfig() + powerConfig()
+}
+
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+//Need to reverse array of size 2
+private byte[] reverseArray(byte[] array) {
+	byte tmp;
+	tmp = array[1];
+	array[1] = array[0];
+	array[0] = tmp;
+	return array
+}
+
+def parseDescriptionAsMap(description) {
+	if (description?.startsWith("read attr -")) {
+		(description - "read attr - ").split(",").inject([:]) { map, param ->
+			def nameAndValue = param.split(":")
+			map += [(nameAndValue[0].trim()): nameAndValue[1].trim()]
+		}
+	}
+	else if (description?.startsWith("catchall: ")) {
+		def seg = (description - "catchall: ").split(" ")
+		def zigbeeMap = [:]
+		zigbeeMap += [raw: (description - "catchall: ")]
+		zigbeeMap += [profileId: seg[0]]
+		zigbeeMap += [clusterId: seg[1]]
+		zigbeeMap += [sourceEndpoint: seg[2]]
+		zigbeeMap += [destinationEndpoint: seg[3]]
+		zigbeeMap += [options: seg[4]]
+		zigbeeMap += [messageType: seg[5]]
+		zigbeeMap += [dni: seg[6]]
+		zigbeeMap += [isClusterSpecific: Short.valueOf(seg[7], 16) != 0]
+		zigbeeMap += [isManufacturerSpecific: Short.valueOf(seg[8], 16) != 0]
+		zigbeeMap += [manufacturerId: seg[9]]
+		zigbeeMap += [command: seg[10]]
+		zigbeeMap += [direction: seg[11]]
+		zigbeeMap += [data: seg.size() > 12 ? seg[12].split("").findAll { it }.collate(2).collect {
+			it.join('')
+		} : []]
+
+		zigbeeMap
+	}
+}
+
+def isKnownDescription(description) {
+	if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
+		def descMap = parseDescriptionAsMap(description)
+		if (descMap.cluster == "0006" || descMap.clusterId == "0006") {
+			isDescriptionOnOff(descMap)
+		}
+		else if (descMap.cluster == "0008" || descMap.clusterId == "0008"){
+			isDescriptionLevel(descMap)
+		}
+		else if (descMap.cluster == "0B04" || descMap.clusterId == "0B04"){
+			isDescriptionPower(descMap)
+		}
+	}
+	else if(description?.startsWith("on/off:")) {
+		def switchValue = description?.endsWith("1") ? "on" : "off"
+		return	[type: "switch", value : switchValue]
+	}
+	else {
+		return "false"
+	}
+}
+
+def isDescriptionOnOff(descMap) {
+	def switchValue = "undefined"
+	if (descMap.cluster == "0006") {				//cluster info from read attr
+		value = descMap.value
+		if (value == "01"){
+			switchValue = "on"
+		}
+		else if (value == "00"){
+			switchValue = "off"
+		}
+	}
+	else if (descMap.clusterId == "0006") {
+		//cluster info from catch all
+		//command 0B is Default response and the last two bytes are [on/off][success]. on/off=00, success=00
+		//command 01 is Read attr response. the last two bytes are [datatype][value]. boolean datatype=10; on/off value = 01/00
+		if ((descMap.command=="0B" && descMap.raw.endsWith("0100")) || (descMap.command=="01" && descMap.raw.endsWith("1001"))){
+			switchValue = "on"
+		}
+		else if ((descMap.command=="0B" && descMap.raw.endsWith("0000")) || (descMap.command=="01" && descMap.raw.endsWith("1000"))){
+			switchValue = "off"
+		}
+		else if(descMap.command=="07"){
+			return	[type: "update", value : "switch (0006) capability configured successfully"]
+		}
+	}
+
+	if (switchValue != "undefined"){
+		return	[type: "switch", value : switchValue]
+	}
+	else {
+		return "false"
+	}
+
+}
+
+//@return - false or "success" or level [0-100]
+def isDescriptionLevel(descMap) {
+	def dimmerValue = -1
+	if (descMap.cluster == "0008"){
+		//TODO: the message returned with catchall is command 0B with clusterId 0008. That is just a confirmation message
+		def value = convertHexToInt(descMap.value)
+		dimmerValue = Math.round(value * 100 / 255)
+		if(dimmerValue==0 && value > 0) {
+			dimmerValue = 1						//handling for non-zero hex value less than 3
+		}
+	}
+	else if(descMap.clusterId == "0008") {
+		if(descMap.command=="0B"){
+			return	[type: "update", value : "level updated successfully"]					//device updating the level change was successful. no value sent.
+		}
+		else if(descMap.command=="07"){
+			return	[type: "update", value : "level (0008) capability configured successfully"]
+		}
+	}
+
+	if (dimmerValue != -1){
+		return	[type: "level", value : dimmerValue]
+
+	}
+	else {
+		return "false"
+	}
+}
+
+def isDescriptionPower(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0B04") {
+		if (descMap.attrId == "050b") {
+			if(descMap.value!="ffff")
+				powerValue = convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0B04") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0B04) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return "false"
+	}
+}
+
+
+def onOffConfig() {
+	[
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 6 0 0x10 0 600 {01}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+	]
+}
+
+//level config for devices with min reporting interval as 5 seconds and reporting interval if no activity as 1hour (3600s)
+//min level change is 01
+def levelConfig() {
+	[
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 8 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 8 0 0x20 5 3600 {01}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+	]
+}
+
+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 05
+def powerConfig() {
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+	]
+}
+
+def setLevelWithRate(level, rate) {
+	if(rate == null){
+		rate = "0000"
+	}
+	level = convertToHexString(level * 255 / 100) 				//Converting the 0-100 range to 0-FF range in hex
+	"st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {$level $rate}"
+}
+
+String convertToHexString(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
 }

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -4,7 +4,6 @@ metadata {
 		capability "Actuator"
 		capability "Switch"
 		capability "Sensor"
-		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0006, 0004, 0003, 0000, 0005", outClusters: "0019", manufacturer: "Compacta International, Ltd", model: "ZBMPlug15", deviceJoinName: "SmartPower Outlet V1"
 	}
@@ -52,7 +51,7 @@ def on() {
 			'zcl on-off on',
 			'delay 200',
 			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 2000'
+			'delay 500'
 
 	]
 
@@ -63,6 +62,6 @@ def off() {
 			'zcl on-off off',
 			'delay 200',
 			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 2000'
+			'delay 500'
 	]
 }

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -13,9 +13,10 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
+
 metadata {
 	// Automatically generated. Make future change here.
-	definition(name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"
@@ -23,12 +24,10 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
-		capability "Outlet"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200-Sgb", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-RZHAC", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "4257050-RZHAC", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
 	}
 
@@ -46,32 +45,32 @@ metadata {
 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
-					"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS1.jpg",
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS1.jpg",
-					"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS2.jpg"
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS2.jpg"
-			])
+				])
 		}
 	}
 
 	// UI tile definitions
 	tiles(scale: 2) {
-		multiAttributeTile(name: "switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label: 'On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
 				attributeState "off", label: 'Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
 				attributeState "turningOn", label: 'Turning On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
 				attributeState "turningOff", label: 'Turning Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
 			}
-			tileAttribute("power", key: "SECONDARY_CONTROL") {
+			tileAttribute ("power", key: "SECONDARY_CONTROL") {
-				attributeState "power", label: '${currentValue} W'
+				attributeState "power", label:'${currentValue} W'
 			}
 		}
 
 		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label: '', action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
 		main "switch"
-		details(["switch", "refresh"])
+		details(["switch","refresh"])
 	}
 }
 
@@ -79,33 +78,52 @@ metadata {
 def parse(String description) {
 	log.debug "description is $description"
 
-	def event = zigbee.getEvent(description)
+	def finalResult = zigbee.getKnownDescription(description)
+	def event = [:]
 
-	if (event) {
+	//TODO: Remove this after getKnownDescription can parse it automatically
-		if (event.name == "power") {
+	if (!finalResult && description!="updated")
-			def value = (event.value as Integer) / 10
+		finalResult = getPowerDescription(zigbee.parseDescriptionAsMap(description))
-			event = createEvent(name: event.name, value: value, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true)
+
-		} else if (event.name == "switch") {
+	if (finalResult) {
-			def descriptionText = event.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
+		log.info "final result = $finalResult"
-			event = createEvent(name: event.name, value: event.value, descriptionText: descriptionText, translatable: true)
+		if (finalResult.type == "update") {
+			log.info "$device updates: ${finalResult.value}"
+			event = null
 		}
-	} else {
+		else if (finalResult.type == "power") {
+			def powerValue = (finalResult.value as Integer)/10
+			event = createEvent(name: "power", value: powerValue, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true)
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/
+		}
+		else {
+			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
+			event = createEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
+		}
+	}
+	else {
 		def cluster = zigbee.parse(description)
 
-		if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+		if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07){
 			if (cluster.data[0] == 0x00) {
 				log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
 				event = createEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-			} else {
+			}
+			else {
 				log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
 				event = null
 			}
-		} else {
+		}
+		else {
 			log.warn "DID NOT PARSE MESSAGE for description : $description"
 			log.debug "${cluster}"
 		}
 	}
-	return event ? createEvent(event) : event
+	return event
 }
 
 def off() {
@@ -132,6 +150,42 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	refresh() + zigbee.onOffConfig(0, 300) + zigbee.electricMeasurementPowerConfig()
+	refresh() + zigbee.onOffConfig(0, 300) + powerConfig()
 }
 
+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 01
+def powerConfig() {
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+//TODO: Remove this after getKnownDescription can parse it automatically
+def getPowerDescription(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0B04") {
+		if (descMap.attrId == "050b") {
+			if(descMap.value!="ffff")
+				powerValue = zigbee.convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0B04") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0B04) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return [:]
+	}
+}

devicetypes/smartthings/smartsense-garage-door-multi.src/smartsense-garage-door-multi.groovy

@@ -88,7 +88,7 @@ def parse(String description) {
 	log.debug "parse($description)"
 	def results = [:]
 
-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}

devicetypes/smartthings/smartsense-garage-door-sensor-button.src/smartsense-garage-door-sensor-button.groovy

@@ -117,7 +117,7 @@ def parse(String description) {
 	log.debug "parse($description)"
 	def results = null
 
-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition(name: "SmartSense Moisture Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -29,10 +29,9 @@ metadata {
 		command "enrollResponse"
 
 
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-S", deviceJoinName: "Water Leak Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-L", deviceJoinName: "Iris Smart Water Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}
 
@@ -43,10 +42,10 @@ metadata {
 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
-					"http://cdn.device-gse.smartthings.com/Moisture/Moisture1.png",
+				"http://cdn.device-gse.smartthings.com/Moisture/Moisture1.png",
-					"http://cdn.device-gse.smartthings.com/Moisture/Moisture2.png",
+				"http://cdn.device-gse.smartthings.com/Moisture/Moisture2.png",
-					"http://cdn.device-gse.smartthings.com/Moisture/Moisture3.png"
+				"http://cdn.device-gse.smartthings.com/Moisture/Moisture3.png"
-			])
+				])
 		}
 		section {
 			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
@@ -55,32 +54,32 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name: "water", type: "generic", width: 6, height: 4) {
+		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
-			tileAttribute("device.water", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
-				attributeState "dry", label: "Dry", icon: "st.alarm.water.dry", backgroundColor: "#ffffff"
+				attributeState "dry", label: "Dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-				attributeState "wet", label: "Wet", icon: "st.alarm.water.wet", backgroundColor: "#53a7c0"
+				attributeState "wet", label: "Wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label: '${currentValue}°',
+			state "temperature", label:'${currentValue}°',
-					backgroundColors: [
+				backgroundColors:[
-							[value: 31, color: "#153591"],
+					[value: 31, color: "#153591"],
-							[value: 44, color: "#1e9cbb"],
+					[value: 44, color: "#1e9cbb"],
-							[value: 59, color: "#90d2a7"],
+					[value: 59, color: "#90d2a7"],
-							[value: 74, color: "#44b621"],
+					[value: 74, color: "#44b621"],
-							[value: 84, color: "#f1d801"],
+					[value: 84, color: "#f1d801"],
-							[value: 95, color: "#d04e00"],
+					[value: 95, color: "#d04e00"],
-							[value: 96, color: "#bc2323"]
+					[value: 96, color: "#bc2323"]
-					]
+				]
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label: '${currentValue}% battery', unit: ""
+			state "battery", label:'${currentValue}% battery', unit:""
 		}
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
-		main(["water", "temperature"])
+		main (["water", "temperature"])
 		details(["water", "temperature", "battery", "refresh"])
 	}
 }
@@ -88,43 +87,117 @@ metadata {
 def parse(String description) {
 	log.debug "description: $description"
 
-	// getEvent will handle temperature and humidity
+	Map map = [:]
-	Map map = zigbee.getEvent(description)
+	if (description?.startsWith('catchall:')) {
-	if (!map) {
+		map = parseCatchAllMessage(description)
-		if (description?.startsWith('zone status')) {
+	}
-			map = parseIasMessage(description)
+	else if (description?.startsWith('read attr -')) {
-		} else {
+		map = parseReportAttributeMessage(description)
-			Map descMap = zigbee.parseDescriptionAsMap(description)
+	}
-			if (descMap.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
+	else if (description?.startsWith('temperature: ')) {
-				map = getBatteryResult(Integer.parseInt(descMap.value, 16))
+		map = parseCustomMessage(description)
-			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
+	}
-				if (descMap.data[0] == "00") {
+	else if (description?.startsWith('zone status')) {
-					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
+		map = parseIasMessage(description)
-					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-				} else {
-					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
-				}
-			}
-		}
 	}
 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : [:]
 
 	if (description?.startsWith('enroll request')) {
-		List cmds = zigbee.enrollResponse()
+		List cmds = enrollResponse()
 		log.debug "enroll response: ${cmds}"
 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
 	return result
 }
 
+private Map parseCatchAllMessage(String description) {
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
+				break
+
+            case 0x0402:
+				if (cluster.command == 0x07) {
+					if (cluster.data[0] == 0x00){
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
+                break
+        }
+    }
+
+    return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+	// 0x0B is default response indicating message got through
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+		cluster.command == 0x0B ||
+		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+
+	return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
+
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
 	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
 }
 
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return Math.round(celsius)
+	} else {
+		return Math.round(celsiusToFahrenheit(celsius))
+	}
+}
+
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 	def linkText = getLinkText(device)
@@ -165,18 +238,40 @@ private Map getBatteryResult(rawValue) {
 	return result
 }
 
+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+    def descriptionText
+    if ( temperatureScale == 'C' )
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    else
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		translatable: true,
+		unit: temperatureScale
+	]
+}
+
 private Map getMoistureResult(value) {
 	log.debug "water"
-	def descriptionText
+    def descriptionText
-	if (value == "wet")
+    if ( value == "wet" )
-		descriptionText = '{{ device.displayName }} is wet'
+    	descriptionText = '{{ device.displayName }} is wet'
-	else
+    else
-		descriptionText = '{{ device.displayName }} is dry'
+    	descriptionText = '{{ device.displayName }} is dry'
 	return [
-			name           : 'water',
+		name: 'water',
-			value          : value,
+		value: value,
-			descriptionText: descriptionText,
+		descriptionText: descriptionText,
-			translatable   : true
+        translatable: true
 	]
 }
 
@@ -189,10 +284,12 @@ def ping() {
 
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
-	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
+	def refreshCmds = [
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+	]
 
-	return refreshCmds + zigbee.enrollResponse()
+	return refreshCmds + enrollResponse()
 }
 
 def configure() {
@@ -204,3 +301,42 @@ def configure() {
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
 	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
 }
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
+}

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition(name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
@@ -45,10 +45,10 @@ metadata {
 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
-					"http://cdn.device-gse.smartthings.com/Motion/Motion1.jpg",
+				"http://cdn.device-gse.smartthings.com/Motion/Motion1.jpg",
-					"http://cdn.device-gse.smartthings.com/Motion/Motion2.jpg",
+				"http://cdn.device-gse.smartthings.com/Motion/Motion2.jpg",
-					"http://cdn.device-gse.smartthings.com/Motion/Motion3.jpg"
+				"http://cdn.device-gse.smartthings.com/Motion/Motion3.jpg"
-			])
+				])
 		}
 		section {
 			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
@@ -57,30 +57,30 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name: "motion", type: "generic", width: 6, height: 4) {
+		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
-			tileAttribute("device.motion", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label: 'motion', icon: "st.motion.motion.active", backgroundColor: "#53a7c0"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-				attributeState "inactive", label: 'no motion', icon: "st.motion.motion.inactive", backgroundColor: "#ffffff"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 			}
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label: '${currentValue}°', unit: "F",
+			state("temperature", label:'${currentValue}°', unit:"F",
-					backgroundColors: [
+				backgroundColors:[
-							[value: 31, color: "#153591"],
+					[value: 31, color: "#153591"],
-							[value: 44, color: "#1e9cbb"],
+					[value: 44, color: "#1e9cbb"],
-							[value: 59, color: "#90d2a7"],
+					[value: 59, color: "#90d2a7"],
-							[value: 74, color: "#44b621"],
+					[value: 74, color: "#44b621"],
-							[value: 84, color: "#f1d801"],
+					[value: 84, color: "#f1d801"],
-							[value: 95, color: "#d04e00"],
+					[value: 95, color: "#d04e00"],
-							[value: 96, color: "#bc2323"]
+					[value: 96, color: "#bc2323"]
-					]
+				]
 			)
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label: '${currentValue}% battery', unit: ""
+			state "battery", label:'${currentValue}% battery', unit:""
 		}
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
 		main(["motion", "temperature"])
@@ -90,40 +90,116 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-	Map map = zigbee.getEvent(description)
+
-	if (!map) {
+	Map map = [:]
-		if (description?.startsWith('zone status')) {
+	if (description?.startsWith('catchall:')) {
-			map = parseIasMessage(description)
+		map = parseCatchAllMessage(description)
-		} else {
+	}
-			Map descMap = zigbee.parseDescriptionAsMap(description)
+	else if (description?.startsWith('read attr -')) {
-			if (descMap?.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
+		map = parseReportAttributeMessage(description)
-				map = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
-			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
+	else if (description?.startsWith('temperature: ')) {
-				if (descMap.data[0] == "00") {
+		map = parseCustomMessage(description)
-					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
+	}
-					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	else if (description?.startsWith('zone status')) {
-				} else {
+		map = parseIasMessage(description)
-					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
-				}
-			} else if (descMap.clusterInt == 0x0406 && descMap.attrInt == 0x0000) {
-				def value = descMap.value.endsWith("01") ? "active" : "inactive"
-				log.warn "Doing a read attr motion event"
-				resultMap = getMotionResult(value)
-			}
-		}
 	}
 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : [:]
 
 	if (description?.startsWith('enroll request')) {
-		List cmds = zigbee.enrollResponse()
+		List cmds = enrollResponse()
 		log.debug "enroll response: ${cmds}"
 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
 	return result
 }
 
+private Map parseCatchAllMessage(String description) {
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
+				break
+
+			case 0x0402:
+				if (cluster.command == 0x07) {
+					if (cluster.data[0] == 0x00) {
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
+				break
+
+			case 0x0406:
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					log.debug 'motion'
+					resultMap.name = 'motion'
+				}
+				break
+		}
+	}
+
+	return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+	// 0x0B is default response indicating message got through
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+		cluster.command == 0x0B ||
+		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+	else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
+		def value = descMap.value.endsWith("01") ? "active" : "inactive"
+		resultMap = getMotionResult(value)
+	}
+
+	return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
+
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
@@ -131,6 +207,15 @@ private Map parseIasMessage(String description) {
 	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
 
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return Math.round(celsius)
+	} else {
+		return Math.round(celsiusToFahrenheit(celsius))
+	}
+}
+
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 	def linkText = getLinkText(device)
@@ -170,14 +255,36 @@ private Map getBatteryResult(rawValue) {
 	return result
 }
 
+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+    def descriptionText
+    if ( temperatureScale == 'C' )
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    else
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		translatable: true,
+		unit: temperatureScale
+	]
+}
+
 private Map getMotionResult(value) {
 	log.debug 'motion'
 	String descriptionText = value == 'active' ? "{{ device.displayName }} detected motion" : "{{ device.displayName }} motion has stopped"
 	return [
-			name           : 'motion',
+		name: 'motion',
-			value          : value,
+		value: value,
-			descriptionText: descriptionText,
+		descriptionText: descriptionText,
-			translatable   : true
+        translatable: true
 	]
 }
 
@@ -185,16 +292,17 @@ private Map getMotionResult(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-	return zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) // Read the Battery Level
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
 }
 
 def refresh() {
 	log.debug "refresh called"
+	def refreshCmds = [
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+	]
 
-	def refreshCmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
+	return refreshCmds + enrollResponse()
-			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000)
-
-	return refreshCmds + zigbee.enrollResponse()
 }
 
 def configure() {
@@ -206,3 +314,42 @@ def configure() {
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
 	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
 }
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
+}

devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy

@@ -45,7 +45,7 @@ metadata {
 
 def parse(String description) {
 	def results = [:]
-	if (description.startsWith("zone") || !isSupportedDescription(description)) {
+	if (isZoneType19(description) || !isSupportedDescription(description)) {
 		results = parseBasicMessage(description)
 	}
 	else if (isMotionStatusMessage(description)){
@@ -57,7 +57,6 @@ def parse(String description) {
 
 private Map parseBasicMessage(description) {
 	def name = parseName(description)
-	def results = [:]
 	if (name != null) {
 		def value = parseValue(description)
 		def linkText = getLinkText(device)
@@ -65,7 +64,7 @@ private Map parseBasicMessage(description) {
 		def handlerName = value
 		def isStateChange = isStateChange(device, name, value)
 
-		results = [
+		def results = [
 				name           : name,
 				value          : value,
 				linkText       : linkText,
@@ -74,6 +73,8 @@ private Map parseBasicMessage(description) {
 				isStateChange  : isStateChange,
 				displayed      : displayed(description, isStateChange)
 		]
+	} else {
+		results = [:]
 	}
 	log.debug "Parse returned $results.descriptionText"
 	return results
@@ -87,12 +88,16 @@ private String parseName(String description) {
 }
 
 private String parseValue(String description) {
-	def zs = zigbee.parseZoneStatus(description)
+	if (isZoneType19(description)) {
-	if (zs) {
+		if (translateStatusZoneType19(description)) {
-		zs.isAlarm1Set() ? "active" : "inactive"
+			return "active"
-	} else {
+		}
-		description
+		else {
+			return "inactive"
+		}
 	}
+
+	description
 }
 
 private parseDescriptionText(String linkText, String value, String description) {

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -14,23 +14,22 @@
  *  under the License.
  */
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
-import physicalgraph.zigbee.zcl.DataType
 
 metadata {
-	definition(name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
 
 		capability "Three Axis"
 		capability "Battery"
 		capability "Configuration"
 		capability "Sensor"
-		capability "Contact Sensor"
+ 		capability "Contact Sensor"
-		capability "Acceleration Sensor"
+ 		capability "Acceleration Sensor"
-		capability "Refresh"
+ 		capability "Refresh"
-		capability "Temperature Measurement"
+ 		capability "Temperature Measurement"
 		capability "Health Check"
 
-		command "enrollResponse"
+ 		command "enrollResponse"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
+ 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
@@ -58,11 +57,11 @@ metadata {
 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
-					"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
+				"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
-					"http://cdn.device-gse.smartthings.com/Multi/Multi2.jpg",
+				"http://cdn.device-gse.smartthings.com/Multi/Multi2.jpg",
-					"http://cdn.device-gse.smartthings.com/Multi/Multi3.jpg",
+				"http://cdn.device-gse.smartthings.com/Multi/Multi3.jpg",
-					"http://cdn.device-gse.smartthings.com/Multi/Multi4.jpg"
+				"http://cdn.device-gse.smartthings.com/Multi/Multi4.jpg"
-			])
+				])
 		}
 		section {
 			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
@@ -74,170 +73,211 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name: "status", type: "generic", width: 6, height: 4) {
+		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
-			tileAttribute("device.status", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
-				attributeState "open", label: 'Open', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
+				attributeState "open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label: 'Closed', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+				attributeState "closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
-				attributeState "garage-open", label: 'Open', icon: "st.doors.garage.garage-open", backgroundColor: "#ffa81e"
+				attributeState "garage-open", label:'Open', icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e"
-				attributeState "garage-closed", label: 'Closed', icon: "st.doors.garage.garage-closed", backgroundColor: "#79b821"
+				attributeState "garage-closed", label:'Closed', icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821"
 			}
 		}
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label: 'Open', icon: "st.contact.contact.open", backgroundColor: "#ffa81e")
+			state("open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-			state("closed", label: 'Closed', icon: "st.contact.contact.closed", backgroundColor: "#79b821")
+			state("closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label: 'Active', icon: "st.motion.acceleration.active", backgroundColor: "#53a7c0")
+			state("active", label:'Active', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
-			state("inactive", label: 'Inactive', icon: "st.motion.acceleration.inactive", backgroundColor: "#ffffff")
+			state("inactive", label:'Inactive', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label: '${currentValue}°',
+			state("temperature", label:'${currentValue}°',
-					backgroundColors: [
+				backgroundColors:[
-							[value: 31, color: "#153591"],
+					[value: 31, color: "#153591"],
-							[value: 44, color: "#1e9cbb"],
+					[value: 44, color: "#1e9cbb"],
-							[value: 59, color: "#90d2a7"],
+					[value: 59, color: "#90d2a7"],
-							[value: 74, color: "#44b621"],
+					[value: 74, color: "#44b621"],
-							[value: 84, color: "#f1d801"],
+					[value: 84, color: "#f1d801"],
-							[value: 95, color: "#d04e00"],
+					[value: 95, color: "#d04e00"],
-							[value: 96, color: "#bc2323"]
+					[value: 96, color: "#bc2323"]
-					]
+				]
 			)
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label: '${currentValue}% battery', unit: ""
+			state "battery", label:'${currentValue}% battery', unit:""
 		}
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
 
 		main(["status", "acceleration", "temperature"])
 		details(["status", "acceleration", "temperature", "battery", "refresh"])
 	}
-}
+ }
 
 def parse(String description) {
-	def maps = []
+	Map map = [:]
-	maps << zigbee.getEvent(description)
+	if (description?.startsWith('catchall:')) {
-	if (!maps[0]) {
+		map = parseCatchAllMessage(description)
-		maps = []
+	}
-		if (description?.startsWith('zone status')) {
+	else if (description?.startsWith('temperature: ')) {
-			maps += parseIasMessage(description)
+		map = parseCustomMessage(description)
-		} else {
+	}
-			Map descMap = zigbee.parseDescriptionAsMap(description)
+	else if (description?.startsWith('zone status')) {
-			if (descMap?.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
+		map = parseIasMessage(description)
-				maps << getBatteryResult(Integer.parseInt(descMap.value, 16))
-			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
-				if (descMap.data[0] == "00") {
-					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
-					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-				} else {
-					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
-				}
-			} else {
-
-				maps += handleAcceleration(descMap)
-			}
-		}
-	} else if (maps[0].name == "temperature") {
-		def map = maps[0]
-		if (tempOffset) {
-			map.value = (int) map.value + (int) tempOffset
-		}
-		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
-		map.translatable = true
 	}
 
-	def result = maps.inject([]) {acc, it ->
+	def result = map ? createEvent(map) : [:]
-		if (it) {
+
-			acc << createEvent(it)
-		}
-	}
 	if (description?.startsWith('enroll request')) {
-		List cmds = zigbee.enrollResponse()
+		List cmds = enrollResponse()
 		log.debug "enroll response: ${cmds}"
 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
+	else if (description?.startsWith('read attr -')) {
+		result = parseReportAttributeMessage(description).each { createEvent(it) }
+	}
 	return result
 }
 
-private List<Map> handleAcceleration(descMap) {
+private Map parseCatchAllMessage(String description) {
-	def result = []
+	Map resultMap = [:]
-	if (descMap.clusterInt == 0xFC02 && descMap.attrInt == 0x0010) {
+	def cluster = zigbee.parse(description)
-		def value = descMap.value == "01" ? "active" : "inactive"
+	log.debug cluster
-		log.debug "Acceleration $value"
+	if (shouldProcessMessage(cluster)) {
-		result << [
+		switch(cluster.clusterId) {
-				name           : "acceleration",
+			case 0x0001:
-				value          : value,
+				// 0x07 - configure reporting
-				descriptionText: "{{ device.displayName }} was $value",
+				if (cluster.command != 0x07) {
-				isStateChange  : isStateChange(device, "acceleration", value),
+					resultMap = getBatteryResult(cluster.data.last())
-				translatable   : true
+				}
-		]
+			break
 
-		if (descMap.additionalAttrs) {
+			case 0xFC02:
-			result += parseAxis(descMap.additionalAttrs)
+				log.debug 'ACCELERATION'
+			break
+
+			case 0x0402:
+				if (cluster.command == 0x07) {
+					if(cluster.data[0] == 0x00) {
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
+			break
 		}
-	} else if (descMap.clusterInt == 0xFC02 && descMap.attrInt == 0x0012) {
-		def addAttrs = descMap.additionalAttrs
-		addAttrs << ["attrInt": descMap.attrInt, "value": descMap.value]
-		result += parseAxis(addAttrs)
 	}
+
+	return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+	// 0x0B is default response indicating message got through
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+	cluster.command == 0x0B ||
+	(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
+}
+
+private List parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+
+	List result = []
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		result << getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "FC02" && descMap.attrId == "0010") {
+		if (descMap.value.size() == 32) {
+			// value will look like 00ae29001403e2290013001629001201
+			// breaking this apart and swapping byte order where appropriate, this breaks down to:
+			//   X (0x0012) = 0x0016
+			//   Y (0x0013) = 0x03E2
+			//   Z (0x0014) = 0x00AE
+			// note that there is a known bug in that the x,y,z attributes are interpreted in the wrong order
+			// this will be fixed in a future update
+			def threeAxisAttributes = descMap.value[0..-9]
+			result << parseAxis(threeAxisAttributes)
+			descMap.value = descMap.value[-2..-1]
+		}
+		result << getAccelerationResult(descMap.value)
+	}
+	else if (descMap.cluster == "FC02" && descMap.attrId == "0012" && descMap.value.size() == 24) {
+		// The size is checked to ensure the attribute report contains X, Y and Z values
+		// If all three axis are not included then the attribute report is ignored
+		result << parseAxis(descMap.value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+
 	return result
 }
 
-private List<Map> parseAxis(List<Map> attrData) {
+private Map parseCustomMessage(String description) {
-	def results = []
+	Map resultMap = [:]
-	def x = hexToSignedInt(attrData.find { it.attrInt == 0x0012 }?.value)
+	if (description?.startsWith('temperature: ')) {
-	def y = hexToSignedInt(attrData.find { it.attrInt == 0x0013 }?.value)
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
-	def z = hexToSignedInt(attrData.find { it.attrInt == 0x0014 }?.value)
+		resultMap = getTemperatureResult(value)
-
-	def xyzResults = [:]
-	if (device.getDataValue("manufacturer") == "SmartThings") {
-		// This mapping matches the current behavior of the Device Handler for the Centralite sensors
-		xyzResults.x = z
-		xyzResults.y = y
-		xyzResults.z = -x
-	} else {
-		// The axises reported by the Device Handler differ from the axises reported by the sensor
-		// This may change in the future
-		xyzResults.x = z
-		xyzResults.y = x
-		xyzResults.z = y
 	}
-
+	return resultMap
-	log.debug "parseAxis -- ${xyzResults}"
-
-	if (garageSensor == "Yes")
-		results += garageEvent(xyzResults.z)
-
-	def value = "${xyzResults.x},${xyzResults.y},${xyzResults.z}"
-	results << [
-			name           : "threeAxis",
-			value          : value,
-			linkText       : getLinkText(device),
-			descriptionText: "${getLinkText(device)} was ${value}",
-			handlerName    : name,
-			isStateChange  : isStateChange(device, "threeAxis", value),
-			displayed      : false
-	]
-	results
 }
 
-private List<Map> parseIasMessage(String description) {
+private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
-	List<Map> results = []
+	Map resultMap = [:]
 
-	if (garageSensor != "Yes") {
+			if (garageSensor != "Yes"){
-		def value = zs.isAlarm1Set() ? 'open' : 'closed'
+		resultMap = zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
-		log.debug "Contact: ${device.displayName} value = ${value}"
+			}
-		def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
-		results << [name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true]
-		results << [name: 'status', value: value, descriptionText: descriptionText, translatable: true]
-	}
 
-	return results
+	return resultMap
 }
 
+def updated() {
+	log.debug "updated called"
+	log.info "garage value : $garageSensor"
+	if (garageSensor == "Yes") {
+		def descriptionText = "Updating device to garage sensor"
+		if (device.latestValue("status") == "open") {
+			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText, translatable: true)
+		}
+		else if (device.latestValue("status") == "closed") {
+			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText, translatable: true)
+		}
+	}
+	else {
+		def descriptionText = "Updating device to open/close sensor"
+		if (device.latestValue("status") == "garage-open") {
+			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText, translatable: true)
+		}
+		else if (device.latestValue("status") == "garage-closed") {
+			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText, translatable: true)
+		}
+	}
+}
+
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return Math.round(celsius)
+		} else {
+			return Math.round(celsiusToFahrenheit(celsius))
+		}
+	}
+
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 
@@ -276,24 +316,54 @@ private Map getBatteryResult(rawValue) {
 	return result
 }
 
-List<Map> garageEvent(zValue) {
+private Map getTemperatureResult(value) {
-	List<Map> results = []
+	log.debug "Temperature"
-	def absValue = zValue.abs()
+	if (tempOffset) {
-	def contactValue = null
+		def offset = tempOffset as int
-	def garageValue = null
+		def v = value as int
-	if (absValue > 900) {
+		value = v + offset
-		contactValue = 'closed'
-		garageValue = 'garage-closed'
-	} else if (absValue < 100) {
-		contactValue = 'open'
-		garageValue = 'garage-open'
 	}
-	if (contactValue != null) {
+	def descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C':
-		def descriptionText = contactValue == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
+			'{{ device.displayName }} was {{ value }}°F'
-		results << [name: 'contact', value: contactValue, descriptionText: descriptionText, displayed: false, translatable: true]
+
-		results << [name: 'status', value: garageValue, descriptionText: descriptionText, translatable: true]
+	return [
-	}
+		name: 'temperature',
-	results
+		value: value,
+		descriptionText: descriptionText,
+		translatable: true,
+		unit: temperatureScale
+	]
+}
+
+private Map getContactResult(value) {
+	log.debug "Contact: ${device.displayName} value = ${value}"
+	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
+	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
+	sendEvent(name: 'status', value: value, descriptionText: descriptionText, translatable: true)
+}
+
+private getAccelerationResult(numValue) {
+	log.debug "Acceleration"
+	def name = "acceleration"
+    def value
+    def descriptionText
+
+	if ( numValue.endsWith("1") ) {
+    	value = "active"
+        descriptionText = '{{ device.displayName }} was active'
+    } else {
+    	value = "inactive"
+        descriptionText = '{{ device.displayName }} was inactive'
+    }
+
+	def isStateChange = isStateChange(device, name, value)
+	return [
+		name: name,
+		value: value,
+		descriptionText: descriptionText,
+		isStateChange: isStateChange,
+		translatable: true
+	]
 }
 
 /**
@@ -306,21 +376,7 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Values "
 
-	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
+	def refreshCmds = []
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode]) +
-			zigbee.enrollResponse()
-
-	return refreshCmds
-}
-
-def configure() {
-	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
-	log.debug "Configuring Reporting"
-	def configCmds = []
 
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		log.debug "Refreshing Values for manufacturer: SmartThings "
@@ -329,45 +385,81 @@ def configure() {
             Separating these out in a separate if-else because I do not want to touch Centralite part
             as of now.
         */
-		configCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
-		configCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
 	} else {
-		// Write a motion threshold of 2 * .063g = .126g
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
-		// Currently due to a Centralite firmware issue, this will cause a read attribute response that
-		// indicates acceleration even when there isn't.
-		configCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
 	}
 
+	//Common refresh commands
+	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
+			zigbee.readAttribute(0x0001, 0x0020) +
+			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
+
+	return refreshCmds + enrollResponse()
+}
+
+def configure() {
+	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
+	// enrolls with default periodic reporting until newer 5 min interval is confirmed
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
+	log.debug "Configuring Reporting"
+
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	configCmds += zigbee.batteryConfig() +
+	def configCmds = zigbee.batteryConfig() +
 			zigbee.temperatureConfig(30, 300) +
-			zigbee.configureReporting(0xFC02, 0x0010, DataType.BITMAP8, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0012, DataType.INT16, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0013, DataType.INT16, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0014, DataType.INT16, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
+			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
 
 	return refresh() + configCmds
 }
 
-def updated() {
+private getEndpointId() {
-	log.debug "updated called"
+	new BigInteger(device.endpointId, 16).toString()
-	log.info "garage value : $garageSensor"
+}
-	if (garageSensor == "Yes") {
+
-		def descriptionText = "Updating device to garage sensor"
+def enrollResponse() {
-		if (device.latestValue("status") == "open") {
+	log.debug "Sending enroll response"
-			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText, translatable: true)
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-		} else if (device.latestValue("status") == "closed") {
+	[
-			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText, translatable: true)
+		//Resending the CIE in case the enroll request is sent before CIE is written
-		}
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private Map parseAxis(String description) {
+	def z = hexToSignedInt(description[0..3])
+	def y = hexToSignedInt(description[10..13])
+	def x = hexToSignedInt(description[20..23])
+	def xyzResults = [x: x, y: y, z: z]
+
+	if (device.getDataValue("manufacturer") == "SmartThings") {
+		// This mapping matches the current behavior of the Device Handler for the Centralite sensors
+		xyzResults.x = z
+		xyzResults.y = y
+		xyzResults.z = -x
 	} else {
-		def descriptionText = "Updating device to open/close sensor"
+		// The axises reported by the Device Handler differ from the axises reported by the sensor
-		if (device.latestValue("status") == "garage-open") {
+		// This may change in the future
-			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText, translatable: true)
+		xyzResults.x = z
-		} else if (device.latestValue("status") == "garage-closed") {
+		xyzResults.y = x
-			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText, translatable: true)
+		xyzResults.z = y
-		}
 	}
+
+	log.debug "parseAxis -- ${xyzResults}"
+
+	if (garageSensor == "Yes")
+		garageEvent(xyzResults.z)
+
+	getXyzResult(xyzResults, description)
 }
 
 private hexToSignedInt(hexVal) {
@@ -375,6 +467,44 @@ private hexToSignedInt(hexVal) {
 	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
 }
 
+def garageEvent(zValue) {
+	def absValue = zValue.abs()
+	def contactValue = null
+	def garageValue = null
+	if (absValue>900) {
+		contactValue = 'closed'
+		garageValue = 'garage-closed'
+	}
+	else if (absValue < 100) {
+		contactValue = 'open'
+		garageValue = 'garage-open'
+	}
+	if (contactValue != null){
+		def descriptionText = contactValue == 'open' ? '{{ device.displayName }} was opened' :'{{ device.displayName }} was closed'
+		sendEvent(name: 'contact', value: contactValue, descriptionText: descriptionText, displayed:false, translatable: true)
+		sendEvent(name: 'status', value: garageValue, descriptionText: descriptionText, translatable: true)
+	}
+}
+
+private Map getXyzResult(results, description) {
+	def name = "threeAxis"
+	def value = "${results.x},${results.y},${results.z}"
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText was $value"
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+		name: name,
+		value: value,
+		unit: null,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: name,
+		isStateChange: isStateChange,
+		displayed: false
+	]
+}
+
 private getManufacturerCode() {
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		return "0x110A"
@@ -386,3 +516,25 @@ private getManufacturerCode() {
 private hexToInt(value) {
 	new BigInteger(value, 16)
 }
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
+}

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -86,7 +86,7 @@ metadata {
 def parse(String description) {
 	def results
 
-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		results = parseSingleMessage(description)
 	}
 	else if (description == 'updated') {
@@ -488,7 +488,12 @@ private String parseValue(String description) {
 	if (!isSupportedDescription(description)) {
 		return description
 	}
-	return zigbee.parseZoneStatus(description)?.isAlarm1Set() ? "open" : "closed"
+	else if (zigbee.translateStatusZoneType19(description)) {
+		return "open"
+	}
+	else {
+		return "closed"
+	}
 }
 
 private parseDescriptionText(String linkText, String value, String description) {

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition(name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
@@ -43,77 +43,155 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name: "contact", type: "generic", width: 6, height: 4) {
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
-			tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
 			}
 		}
 
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label: '${currentValue}°',
+			state "temperature", label:'${currentValue}°',
-					backgroundColors: [
+				backgroundColors:[
-							[value: 31, color: "#153591"],
+					[value: 31, color: "#153591"],
-							[value: 44, color: "#1e9cbb"],
+					[value: 44, color: "#1e9cbb"],
-							[value: 59, color: "#90d2a7"],
+					[value: 59, color: "#90d2a7"],
-							[value: 74, color: "#44b621"],
+					[value: 74, color: "#44b621"],
-							[value: 84, color: "#f1d801"],
+					[value: 84, color: "#f1d801"],
-							[value: 95, color: "#d04e00"],
+					[value: 95, color: "#d04e00"],
-							[value: 96, color: "#bc2323"]
+					[value: 96, color: "#bc2323"]
-					]
+				]
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label: '${currentValue}% battery', unit: ""
+			state "battery", label:'${currentValue}% battery', unit:""
 		}
 
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
-		main(["contact", "temperature"])
+		main (["contact", "temperature"])
-		details(["contact", "temperature", "battery", "refresh"])
+		details(["contact","temperature","battery","refresh"])
 	}
 }
 
 def parse(String description) {
 	log.debug "description: $description"
 
-	Map map = zigbee.getEvent(description)
+	Map map = [:]
-	if (!map) {
+	if (description?.startsWith('catchall:')) {
-		if (description?.startsWith('zone status')) {
+		map = parseCatchAllMessage(description)
-			map = parseIasMessage(description)
-		} else {
-			Map descMap = zigbee.parseDescriptionAsMap(description)
-			if (descMap?.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
-				map = getBatteryResult(Integer.parseInt(descMap.value, 16))
-			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
-				if (descMap.data[0] == "00") {
-					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
-					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-				} else {
-					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
-				}
-			}
-		}
 	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+    else if (description?.startsWith('zone status')) {
+    	map = parseIasMessage(description)
+    }
 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : [:]
 
-	if (description?.startsWith('enroll request')) {
+    if (description?.startsWith('enroll request')) {
-		List cmds = zigbee.enrollResponse()
+    	List cmds = enrollResponse()
-		log.debug "enroll response: ${cmds}"
+        log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
+    }
-	return result
+    return result
 }
 
+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
+                break
+
+            case 0x0402:
+				if (cluster.command == 0x07){
+					if (cluster.data[0] == 0x00) {
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
+                break
+        }
+    }
+
+    return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+    // 0x0B is default response indicating message got through
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+        cluster.command == 0x0B ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
+}
+
+private int getHumidity(value) {
+    return Math.round(Double.parseDouble(value))
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+
+	return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
 
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
 
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return celsius
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
+}
+
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
@@ -126,8 +204,8 @@ private Map getBatteryResult(rawValue) {
 		def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
-		if (roundedPct <= 0)
+	    if (roundedPct <= 0)
-			roundedPct = 1
+		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 		result.name = 'battery'
@@ -136,14 +214,31 @@ private Map getBatteryResult(rawValue) {
 	return result
 }
 
+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	def linkText = getLinkText(device)
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		unit: temperatureScale
+	]
+}
+
 private Map getContactResult(value) {
 	log.debug 'Contact Status'
 	def linkText = getLinkText(device)
 	def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
 	return [
-			name           : 'contact',
+		name: 'contact',
-			value          : value,
+		value: value,
-			descriptionText: descriptionText
+		descriptionText: descriptionText
 	]
 }
 
@@ -156,10 +251,12 @@ def ping() {
 
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
-	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
+	def refreshCmds = [
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+	]
 
-	return refreshCmds + zigbee.enrollResponse()
+	return refreshCmds + enrollResponse()
 }
 
 def configure() {
@@ -171,5 +268,44 @@ def configure() {
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
+    return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
 }

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -13,10 +13,8 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import physicalgraph.zigbee.zcl.DataType
-
 metadata {
-	definition(name: "SmartSense Temp/Humidity Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -33,7 +31,7 @@ metadata {
 		status 'H 45': 'catchall: 0104 FC45 01 01 0140 00 D9B9 00 04 C2DF 0A 01 0000218911'
 		status 'H 57': 'catchall: 0104 FC45 01 01 0140 00 4E55 00 04 C2DF 0A 01 0000211316'
 		status 'H 53': 'catchall: 0104 FC45 01 01 0140 00 20CD 00 04 C2DF 0A 01 0000219814'
-		status 'H 43': 'read attr - raw: BF7601FC450C00000021A410, dni: BF76, endpoint: 01, cluster: FC45, size: 0C, attrId: 0000, result: success, encoding: 21, value: 10a4'
+		status 'H 43':  'read attr - raw: BF7601FC450C00000021A410, dni: BF76, endpoint: 01, cluster: FC45, size: 0C, attrId: 0000, result: success, encoding: 21, value: 10a4'
 	}
 
 	preferences {
@@ -42,28 +40,28 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name: "temperature", type: "generic", width: 6, height: 4) {
+		multiAttributeTile(name:"temperature", type: "generic", width: 6, height: 4){
-			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState "temperature", label: '${currentValue}°',
+				attributeState "temperature", label:'${currentValue}°',
-						backgroundColors: [
+					backgroundColors:[
-								[value: 31, color: "#153591"],
+						[value: 31, color: "#153591"],
-								[value: 44, color: "#1e9cbb"],
+						[value: 44, color: "#1e9cbb"],
-								[value: 59, color: "#90d2a7"],
+						[value: 59, color: "#90d2a7"],
-								[value: 74, color: "#44b621"],
+						[value: 74, color: "#44b621"],
-								[value: 84, color: "#f1d801"],
+						[value: 84, color: "#f1d801"],
-								[value: 95, color: "#d04e00"],
+						[value: 95, color: "#d04e00"],
-								[value: 96, color: "#bc2323"]
+						[value: 96, color: "#bc2323"]
-						]
+					]
 			}
 		}
 		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
-			state "humidity", label: '${currentValue}% humidity', unit: ""
+			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label: '${currentValue}% battery'
+			state "battery", label:'${currentValue}% battery'
 		}
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
 		main "temperature", "humidity"
@@ -74,31 +72,142 @@ metadata {
 def parse(String description) {
 	log.debug "description: $description"
 
-	// getEvent will handle temperature and humidity
+	Map map = [:]
-	Map map = zigbee.getEvent(description)
+	if (description?.startsWith('catchall:')) {
-	if (!map) {
+		map = parseCatchAllMessage(description)
-		Map descMap = zigbee.parseDescriptionAsMap(description)
+	}
-		if (descMap.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
+	else if (description?.startsWith('read attr -')) {
-			map = getBatteryResult(Integer.parseInt(descMap.value, 16))
+		map = parseReportAttributeMessage(description)
-		} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
+	}
-			if (descMap.data[0] == "00") {
+	else if (description?.startsWith('temperature: ') || description?.startsWith('humidity: ')) {
-				log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
+		map = parseCustomMessage(description)
-				sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-			} else {
-				log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
-			}
-		}
 	}
 
 	log.debug "Parse returned $map"
 	return map ? createEvent(map) : [:]
 }
 
+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
+                break
+
+            case 0x0402:
+				if (cluster.command == 0x07) {
+					if (cluster.data[0] == 0x00){
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
+				break
+
+			case 0xFC45:
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					String pctStr = cluster.data[-1, -2].collect { Integer.toHexString(it) }.join('')
+					String display = Math.round(Integer.valueOf(pctStr, 16) / 100)
+					resultMap = getHumidityResult(display)
+				}
+                break
+        }
+    }
+
+    return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+    // 0x0B is default response indicating message got through
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+        cluster.command == 0x0B ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+	else if (descMap.cluster == "FC45" && descMap.attrId == "0000") {
+		def value = getReportAttributeHumidity(descMap.value)
+		resultMap = getHumidityResult(value)
+	}
+
+	return resultMap
+}
+
+def getReportAttributeHumidity(String value) {
+    def humidity = null
+    if (value?.trim()) {
+        try {
+        	// value is hex with no decimal
+            def pct = Integer.parseInt(value.trim(), 16) / 100
+            humidity = String.format('%.0f', pct)
+        } catch(NumberFormatException nfe) {
+            log.debug "Error converting $value to humidity"
+        }
+    }
+    return humidity
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	else if (description?.startsWith('humidity: ')) {
+		def pct = (description - "humidity: " - "%").trim()
+		if (pct.isNumber()) {
+			def value = Math.round(new BigDecimal(pct)).toString()
+			resultMap = getHumidityResult(value)
+		} else {
+			log.error "invalid humidity: ${pct}"
+		}
+	}
+	return resultMap
+}
+
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return celsius
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
+}
+
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
 
-  def result = [:]
+    def result = [:]
 
 	def volts = rawValue / 10
 	if (!(rawValue == 0 || rawValue == 255)) {
@@ -117,22 +226,41 @@ private Map getBatteryResult(rawValue) {
 	return result
 }
 
+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	def linkText = getLinkText(device)
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		unit: temperatureScale
+	]
+}
+
+private Map getHumidityResult(value) {
+	log.debug 'Humidity'
+	return value ? [name: 'humidity', value: value, unit: '%'] : [:]
+}
+
 /**
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-	return zigbee.readAttribute(0x0001, 0x0020) // Read the Battery Level
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
 }
 
-def refresh() {
+def refresh()
+{
 	log.debug "refresh temperature, humidity, and battery"
-	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0x104E]) +   // New firmware
+	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
-			zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
+			zigbee.readAttribute(0x0402, 0x0000) +
-			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
+			zigbee.readAttribute(0x0001, 0x0020)
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.configureReporting(0xFC45, 0x0000, DataType.INT16, 30, 3600, 100) +
-			zigbee.batteryConfig() +
-			zigbee.temperatureConfig(30, 300)
 }
 
 def configure() {
@@ -141,8 +269,35 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting and Bindings."
+	def humidityConfigCmds = [
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
+	]
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh()
+	return refresh() + humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300)  // send refresh cmds as part of config
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
 }

devicetypes/smartthings/smartsense-virtual-open-closed.src/smartsense-virtual-open-closed.groovy

@@ -96,7 +96,7 @@ metadata {
 def parse(String description) {
 	def results
 
-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}

devicetypes/smartthings/testing/simulated-minimote.src/simulated-minimote.groovy

@@ -126,15 +126,6 @@ private hold(button) {
 	sendEvent(name: "button", value: "held", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was held", isStateChange: true)
 }
 
-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/testing/simulated-switch.src/simulated-switch.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-
+	
     definition (name: "Simulated Switch", namespace: "smartthings/testing", author: "bob") {
 		capability "Switch"
         capability "Relay Switch"
@@ -39,7 +39,9 @@ metadata {
 	}
 }
 
-def parse(description) {
+def parse(String description) {
+	def pair = description.split(":")
+	createEvent(name: pair[0].trim(), value: pair[1].trim())
 }
 
 def on() {

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -86,7 +86,7 @@ def parse(String description) {
 	def bodyString = msg.body
 	if (bodyString) {
 		unschedule("setOffline")
-        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))
+		def body = new XmlSlurper().parseText(bodyString)
 
 		if (body?.property?.TimeSyncRequest?.text()) {
 			log.trace "Got TimeSyncRequest"

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -78,7 +78,7 @@ def parse(String description) {
 	def bodyString = msg.body
 	if (bodyString) {
     	unschedule("setOffline")
-        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))
+		def body = new XmlSlurper().parseText(bodyString)
 		if (body?.property?.TimeSyncRequest?.text()) {
 			log.trace "Got TimeSyncRequest"
 			result << timeSyncResponse()

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -84,7 +84,7 @@ def parse(String description) {
     def bodyString = msg.body
     if (bodyString) {
     	unschedule("setOffline")
-        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))
+        def body = new XmlSlurper().parseText(bodyString)
  		if (body?.property?.TimeSyncRequest?.text()) {
         	log.trace "Got TimeSyncRequest"
         	result << timeSyncResponse()
@@ -208,7 +208,7 @@ def subscribe(ip, port) {
     def existingIp = getDataValue("ip")
     def existingPort = getDataValue("port")
     if (ip && ip != existingIp) {
-         log.debug "Updating ip from $existingIp to $ip"
+         log.debug "Updating ip from $existingIp to $ip"    
     	 updateDataValue("ip", ip)
     	 def ipvalue = convertHexToIP(getDataValue("ip"))
          sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
@@ -291,4 +291,4 @@ User-Agent: CyberGarage-HTTP/1.0
 </u:GetBinaryState>
 </s:Body>
 </s:Envelope>""", physicalgraph.device.Protocol.LAN)
-}
+}

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -13,7 +13,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import physicalgraph.zigbee.zcl.DataType
 
 metadata {
     definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
@@ -29,8 +28,8 @@ metadata {
 
         fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
         //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
-        fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
+        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
-        fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
+        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
     }
 
     simulator {}
@@ -83,7 +82,7 @@ def parse(String description) {
         def result = event ? createEvent(event) : []
 
         if (description?.startsWith('enroll request')) {
-            List cmds = zigbee.enrollResponse()
+            List cmds = enrollResponse()
             result = cmds?.collect { new physicalgraph.device.HubAction(it) }
         }
         return result
@@ -118,38 +117,15 @@ private Map getBatteryResult(rawValue) {
 private Map parseNonIasButtonMessage(Map descMap){
     def buttonState = ""
     def buttonNumber = 0
-    if ((device.getDataValue("model") == "3460-L") &&(descMap.clusterInt == 0x0006)) {
+    if (((device.getDataValue("model") == "3460-L") || (device.getDataValue("model") == "3450-L"))
-        if (descMap.commandInt == 1) {
+            &&(descMap.clusterInt == 0x0006)) {
+        if (descMap.command == "01") {
             getButtonResult("press")
         }
-        else if (descMap.commandInt == 0) {
+        else if (descMap.command == "00") {
             getButtonResult("release")
         }
     }
-    else if ((device.getDataValue("model") == "3450-L") && (descMap.clusterInt == 0x0006)) {
-        if (descMap.commandInt == 1) {
-            getButtonResult("press")
-        }
-        else if (descMap.commandInt == 0) {
-            def button = 1
-            switch(descMap.sourceEndpoint) {
-                case "01":
-                    button = 4
-                    break
-                case "02":
-                    button = 3
-                    break
-                case "03":
-                    button = 1
-                    break
-                case "04":
-                    button = 2
-                    break
-            }
-        
-            getButtonResult("release", button)
-        }
-    }
     else if (descMap.clusterInt == 0x0006) {
         buttonState = "pushed"
         if (descMap.command == "01") {
@@ -184,7 +160,7 @@ private Map parseNonIasButtonMessage(Map descMap){
 def refresh() {
     log.debug "Refreshing Battery"
 
-    return zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x20) +
+    return zigbee.readAttribute(0x0001, 0x20) +
             zigbee.enrollResponse()
 }
 
@@ -201,9 +177,9 @@ def configure() {
     }
     return zigbee.onOffConfig() +
             zigbee.levelConfig() +
-            zigbee.configureReporting(zigbee.POWER_CONFIGURATION_CLUSTER, 0x20, DataType.UINT8, 30, 21600, 0x01) +
+            zigbee.configureReporting(0x0001, 0x20, 0x20, 30, 21600, 0x01) +
             zigbee.enrollResponse() +
-            zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x20) +
+            zigbee.readAttribute(0x0001, 0x20) +
             cmds
 
 }

devicetypes/smartthings/zigbee-dimmer-power.src/README.md

@@ -23,7 +23,6 @@ Works with:
 * **Switch** - can detect state (possible values: on/off)
 * **Switch Level** - represents current light level, usually 0-100 in percent
 * **Health Check** - indicates ability to get device health notifications
-* **Light** - indicates that the device belongs to Light category.
 
 ## Device Health
 

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -22,7 +22,6 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
-        capability "Light"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702"
@@ -98,7 +97,7 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value) + (value?.toInteger() > 0 ? zigbee.on() : [])
+    zigbee.setLevel(value)
 }
 
 /**

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -20,19 +20,12 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
-        capability "Light"
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart A19 Soft White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart BR30 Soft White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "E11-G13", deviceJoinName: "Sengled Element Classic"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL6HD", deviceJoinName: "Leviton Dimmer Switch"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL3HL", deviceJoinName: "Leviton Lumina RF Plug-In Dimmer"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL1KD", deviceJoinName: "Leviton Lumina RF Dimmer Switch"
     }
 
     tiles(scale: 2) {
@@ -94,13 +87,7 @@ def on() {
 }
 
 def setLevel(value) {
-    def additionalCmds = []
+    zigbee.setLevel(value)
-    if (device.getDataValue("model") == "iQBR30" && value.toInteger() > 0) { // Handle iQ bulb not following spec
-        additionalCmds = zigbee.on()
-    } else if (device.getDataValue("manufacturer") == "MRVL") { // Handle marvel stack not reporting
-        additionalCmds = refresh()
-    }
-    zigbee.setLevel(value) + additionalCmds
 }
 /**
  * PING is used by Device-Watch in attempt to reach the Device
@@ -110,7 +97,7 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
 }
 
 def configure() {
@@ -120,5 +107,5 @@ def configure() {
     sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
 }

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -13,8 +13,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import physicalgraph.zigbee.zcl.DataType
-
  metadata {
     definition (name: "ZigBee Lock", namespace: "smartthings", author: "SmartThings")
     {
@@ -73,6 +71,9 @@ private getDOORLOCK_CMD_UNLOCK_DOOR() { 0x01 }
 private getDOORLOCK_ATTR_LOCKSTATE() { 0x0000 }
 private getPOWER_ATTR_BATTERY_PERCENTAGE_REMAINING() { 0x0021 }
 
+private getTYPE_U8() { 0x20 }
+private getTYPE_ENUM8() { 0x30 }
+
 // Public methods
 def installed() {
     log.trace "installed()"
@@ -85,9 +86,9 @@ def uninstalled() {
 def configure() {
     def cmds =
         zigbee.configureReporting(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE,
-                                  DataType.ENUM8, 0, 3600, null) +
+                                  TYPE_ENUM8, 0, 3600, null) +
         zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING,
-                                  DataType.UINT8, 600, 21600, 0x01)
+                                  TYPE_U8, 600, 21600, 0x01)
     log.info "configure() --- cmds: $cmds"
     return refresh() + cmds // send refresh cmds as part of config
 }

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -15,7 +15,6 @@
  *
  *  This DTH should serve as the generic DTH to handle RGB ZigBee HA devices (For color bulbs with no color temperature)
  */
-import physicalgraph.zigbee.zcl.DataType
 
 metadata {
 	definition (name: "ZigBee RGB Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -28,10 +27,9 @@ metadata {
 		capability "Switch"
 		capability "Switch Level"
 		capability "Health Check"
-		capability "Light"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
 	}
 
 	// UI tile definitions
@@ -123,7 +121,7 @@ def ping() {
 }
 
 def refresh() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def configure() {
@@ -133,7 +131,7 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setLevel(value) {

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -15,7 +15,6 @@
  *
  *  This DTH should serve as the generic DTH to handle RGBW ZigBee HA devices
  */
-import physicalgraph.zigbee.zcl.DataType
 
 metadata {
     definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -29,17 +28,15 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
-        capability "Light"
 
         attribute "colorName", "string"
         command "setGenericName"
 
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "SYLVANIA Smart Flex RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "SYLVANIA Smart A19 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED A19 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "SYLVANIA Smart BR30 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "OSRAM LIGHTIFY LED BR30 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "SYLVANIA Smart RT5/6 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "OSRAM LIGHTIFY LED RT 5/6 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY FLEX OUTDOOR RGBW", deviceJoinName: "SYLVANIA Smart Outdoor RGBW Flex"
     }
 
     // UI tile definitions
@@ -141,7 +138,7 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def configure() {

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -21,7 +21,6 @@ metadata {
         capability "Sensor"
         capability "Switch"
         capability "Health Check"
-        capability "Light"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -22,8 +22,6 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "000A", manufacturer: "HAI", model: "65A21-1", deviceJoinName: "Leviton Wireless Load Control Module-30amp"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL15A", deviceJoinName: "Leviton Lumina RF Plug-In Appliance Module"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL15S", deviceJoinName: "Leviton Lumina RF Switch"
     }
 
     // simulator metadata

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -11,7 +11,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import physicalgraph.zigbee.zcl.DataType
 
 metadata {
     definition (name: "ZigBee Valve", namespace: "smartthings", author: "SmartThings") {
@@ -67,6 +66,8 @@ private getCLUSTER_BASIC() { 0x0000 }
 private getBASIC_ATTR_POWER_SOURCE() { 0x0007 }
 private getCLUSTER_POWER() { 0x0001 }
 private getPOWER_ATTR_BATTERY_PERCENTAGE_REMAINING() { 0x0021 }
+private getTYPE_U8() { 0x20 }
+private getTYPE_ENUM8() { 0x30 }
 
 // Parse incoming device messages to generate events
 def parse(String description) {
@@ -127,8 +128,8 @@ def refresh() {
     zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
     zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) +
     zigbee.onOffConfig() +
-    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, DataType.UINT8, 600, 21600, 1) +
+    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
-    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, DataType.ENUM8, 5, 21600, 1)
+    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1)
 }
 
 def configure() {

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -26,19 +26,17 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
-        capability "Light"
 
         attribute "colorName", "string"
         command "setGenericName"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04", outClusters: "0019"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "SYLVANIA Smart BR30 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Flood BR30 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "SYLVANIA Smart RT5/6 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY RT5/6 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "SYLVANIA Smart A19 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "Z01-A19NAE26", deviceJoinName: "Sengled Element plus"
     }
 
     // UI tile definitions
@@ -85,24 +83,105 @@ def parse(String description) {
         }
     }
     else {
-        def cluster = zigbee.parse(description)
+        Map bindingTable = parseBindingTableResponse(description)
+        if (bindingTable) {
+            List<String> cmds = []
+            bindingTable.table_entries.inject(cmds) { acc, entry ->
+                // The binding entry is not for our hub and should be deleted
+                if (entry["dstAddr"] != zigbeeEui) {
+                    acc.addAll(removeBinding(entry.clusterId, entry.srcAddr, entry.srcEndpoint, entry.dstAddr, entry.dstEndpoint))
+                }
+                acc
+            }
+            // There are more entries that we haven't examined yet
+            if (bindingTable.numTableEntries > bindingTable.startIndex + bindingTable.numEntriesReturned) {
+                def startPos
+                if (cmds) {
+                    log.warn "Removing binding entries for other devices: $cmds"
+                    // Since we are removing some entries, we should start in the same spot as we just read since values
+                    // will fill in the newly vacated spots
+                    startPos = bindingTable.startIndex
+                } else {
+                    // Since we aren't removing anything we move forward to the next set of table entries
+                    startPos = bindingTable.startIndex + bindingTable.numEntriesReturned
+                }
+                cmds.addAll(requestBindingTable(startPos))
+            }
+            sendHubCommand(cmds.collect { it ->
+                new physicalgraph.device.HubAction(it)
+            }, 2000)
+        } else {
+            def cluster = zigbee.parse(description)
 
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+            if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
+                if (cluster.data[0] == 0x00) {
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
+                    log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+                    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+                }
+                else {
+                    log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+                }
             }
             else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+                log.warn "DID NOT PARSE MESSAGE for description : $description"
+                log.debug "${cluster}"
             }
         }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
-        }
     }
 }
 
+def parseBindingTableResponse(description) {
+    Map descMap = zigbee.parseDescriptionAsMap(description)
+    if (descMap["clusterInt"] == 0x8033) {
+        def header_field_lengths = ["transactionSeqNo": 1, "status": 1, "numTableEntries": 1, "startIndex": 1, "numEntriesReturned": 1]
+        def field_values = [:]
+        def data = descMap["data"]
+        header_field_lengths.each { k, v ->
+            field_values[k] = Integer.parseInt(data.take(v).join(""), 16);
+            data = data.drop(v);
+        }
+
+        List<Map> table = []
+        if (field_values.numEntriesReturned) {
+            def table_entry_lengths = ["srcAddr": 8, "srcEndpoint": 1, "clusterId": 2, "dstAddrMode": 1]
+            for (def i : 0..(field_values.numEntriesReturned - 1)) {
+                def entryMap = [:]
+                table_entry_lengths.each { k, v ->
+                    def val = data.take(v).reverse().join("")
+                    entryMap[k] = val.length() < 8 ? Integer.parseInt(val, 16) : val
+                    data = data.drop(v)
+                }
+
+                switch (entryMap.dstAddrMode) {
+                    case 0x01:
+                        entryMap["dstAddr"] = data.take(2).reverse().join("")
+                        data = data.drop(2)
+                        break
+                    case 0x03:
+                        entryMap["dstAddr"] = data.take(8).reverse().join("")
+                        data = data.drop(8)
+                        entryMap["dstEndpoint"] = Integer.parseInt(data.take(1).join(""), 16)
+                        data = data.drop(1)
+                        break
+                }
+                table << entryMap
+            }
+        }
+        field_values["table_entries"] = table
+        return field_values
+    }
+    return [:]
+}
+
+def requestBindingTable(startPos=0) {
+    return ["zdo mgmt-bind 0x${zigbee.deviceNetworkId} $startPos"]
+}
+
+def removeBinding(cluster, srcAddr, srcEndpoint, destAddr, destEndpoint) {
+    return ["zdo unbind unicast 0x${zigbee.deviceNetworkId} {${srcAddr}} $srcEndpoint $cluster {${destAddr}} $destEndpoint"]
+}
+
+
 def off() {
     zigbee.off()
 }
@@ -132,8 +211,7 @@ def configure() {
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
     sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
-    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    refresh() + requestBindingTable(0) + ["delay 2000"]
-    refresh()
 }
 
 def setColorTemperature(value) {

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -89,7 +89,7 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
 def refresh() {
@@ -127,8 +127,8 @@ def configureHealthCheck() {
 
 def configure() {
     log.debug "configure()"
-    configureHealthCheck()
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    configureHealthCheck()
 }
 
 def updated() {

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -11,7 +11,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import physicalgraph.zigbee.zcl.DataType
 
 metadata {
 	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -108,7 +107,7 @@ def configure() {
 }
 
 def configureAttributes() {
-	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def refreshAttributes() {
@@ -116,7 +115,7 @@ def refreshAttributes() {
 }
 
 def setLevel(value) {
-	zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+	zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
 def setColor(value){

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -11,7 +11,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import physicalgraph.zigbee.zcl.DataType
 
 metadata {
     definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -28,10 +27,6 @@ metadata {
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 RGBW"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "PAR 16 50 RGBW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY RGBW PAR 16 50"
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenpole RGBW-Lightify", deviceJoinName: "OSRAM LIGHTIFY Gardenpole RGBW"
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Outdoor Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Outdoor Flex RGBW"
     }
 
     // UI tile definitions
@@ -124,7 +119,7 @@ def configure() {
 }
 
 def configureAttributes() {
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def refreshAttributes() {
@@ -136,7 +131,7 @@ def setColorTemperature(value) {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()        //adding refresh because of ZLL bulb not conforming to send-me-a-report
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
 def setColor(value){

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -32,7 +32,6 @@ metadata {
 
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"PAR16 50 TW", deviceJoinName: "OSRAM LIGHTIFY LED PAR16 50 Tunable White"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
     }
 
     // UI tile definitions
@@ -90,7 +89,7 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()
 }
 
 def refresh() {

devicetypes/smartthings/zwave-dimmer-switch-generic.src/README.md

@@ -6,12 +6,6 @@ Works with:
 
 * [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-plug-in-lamp-dimmer-module)
 * [Leviton Universal Dimmer (DZMX1-LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-universal-dimmer)
-* [Leviton 1000W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-1000w-incandescent-dimmer)
-* [Leviton 600W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-600w-incandescent-dimmer)
-* [Enerwave In-Wall Dimmer](https://www.smartthings.com/works-with-smartthings/enerwave/enerwave-in-wall-dimmer-zw500d)
-* [Leviton 3-Speed Fan Controller](https://www.smartthings.com/works-with-smartthings/leviton/leviton-3-speed-fan-controller)
-* [Leviton Magnetic Low Voltage Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-magnetic-low-voltage-dimmer)
-* [Remotec Technology Plug-In Dimmer](https://www.smartthings.com/works-with-smartthings/remotec-technology/remotec-technology-plug-in-dimmer)
 
 ## Table of contents
 
@@ -46,9 +40,4 @@ If the device doesn't pair when trying from the SmartThings mobile app, it is po
 Pairing needs to be tried again by placing the device closer to the hub.
 Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
 * [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 1000W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 600W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 3-Speed Fan Controller Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Enerwave In-Wall Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204854176-How-to-connect-Enerwave-switches-and-dimmers)
-* [Remotec Technology Plug-In Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202295150-Remotec-Technology-Plug-In-Dimmer-ZDS-100-)

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -20,17 +20,10 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Light"
 
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1B03", model:"0334", deviceJoinName: "Leviton Universal Dimmer"
-		fingerprint mfr:"011A", prod:"0102", model:"0201", deviceJoinName: "Enerwave In-Wall Dimmer"
-		fingerprint mfr:"001D", prod:"1001", model:"0334", deviceJoinName: "Leviton 3-Speed Fan Controller"
-		fingerprint mfr:"001D", prod:"0602", model:"0334", deviceJoinName: "Leviton Magnetic Low Voltage Dimmer"
-		fingerprint mfr:"001D", prod:"0401", model:"0334", deviceJoinName: "Leviton 600W Incandescent Dimmer"
-		fingerprint mfr:"0111", prod:"8200", model:"0200", deviceJoinName: "Remotec Technology Plug-In Dimmer"
-		fingerprint mfr:"1104", prod:"001D", model:"0501", deviceJoinName: "Leviton 1000W Incandescant Dimmer"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -25,7 +25,6 @@ metadata {
 		capability "Switch Level"
 		capability "Sensor"
 		capability "Actuator"
-		capability "Light"
 
 		command "reset"
 

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -21,7 +21,6 @@ metadata {
 		capability "Refresh"
 		capability "Configuration"
 		capability "Sensor"
-		capability "Light"
 
 		command "reset"
 

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -28,7 +28,6 @@ metadata {
 		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
 		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
 		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
-		fingerprint mfr: "0063", prod: "4953", model: "3133", deviceJoinName: "GE Smart Motion Sensor"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -19,18 +19,12 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Light"
 
 		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
 		fingerprint mfr:"001D", prod:"1A02", model:"0334", deviceJoinName: "Leviton Appliance Module"
 		fingerprint mfr:"0063", prod:"4F50", model:"3031", deviceJoinName: "GE Plug-in Outdoor Switch"
 		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
 		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
-		fingerprint mfr:"001D", prod:"0301", model:"0334", deviceJoinName: "Leviton 15A Switch"
-		fingerprint mfr:"001D", prod:"0F01", model:"0334", deviceJoinName: "Leviton 5A Incandescent Switch"
-		fingerprint mfr:"001D", prod:"1603", model:"0334", deviceJoinName: "Leviton 15A Split Duplex Receptacle"
-		fingerprint mfr:"011A", prod:"0101", model:"0102", deviceJoinName: "Enerwave On/Off Switch"
-		fingerprint mfr:"011A", prod:"0101", model:"0603", deviceJoinName: "Enerwave Duplex Receptacle"
 	}
 
 	// simulator metadata

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 
 		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
 		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -73,7 +73,7 @@ def authPage() {
 			return dynamicPage(name: "Credentials", title: "Authorize Connection", nextPage:"listDevices", uninstall: uninstallAllowed, install:false) {
 				section() {
 					paragraph "Tap below to log in to the netatmo and authorize SmartThings access."
-					href url:redirectUrl, style:"embedded", required:false, title:"Connect to ${getVendorName()}", description:description
+					href url:redirectUrl, style:"embedded", required:false, title:"Connect to ${getVendorName()}:", description:description
 				}
 			}
 		} else {
@@ -146,24 +146,19 @@ def callback() {
 
 		// log.debug "PARAMS: ${params}"
 
-		try {
+		httpPost(params) { resp ->
-            httpPost(params) { resp ->
 
-                def slurper = new JsonSlurper()
+			def slurper = new JsonSlurper()
 
-                resp.data.each { key, value ->
+			resp.data.each { key, value ->
-                    def data = slurper.parseText(key)
+				def data = slurper.parseText(key)
-					log.debug "Data: $data"
+
-                    state.refreshToken = data.refresh_token
+				state.refreshToken = data.refresh_token
-                    state.authToken = data.access_token
+				state.authToken = data.access_token
-                    //state.accessToken = data.access_token
+				state.tokenExpires = now() + (data.expires_in * 1000)
-                    state.tokenExpires = now() + (data.expires_in * 1000)
+				// log.debug "swapped token: $resp.data"
-                    // log.debug "swapped token: $resp.data"
+			}
-                }
+		}
-            }
-        } catch (Exception e) {
-			log.debug "callback: Call failed $e"
-        }
 
 		// Handle success and failure here, and render stuff accordingly
 		if (state.authToken) {
@@ -392,18 +387,18 @@ def getDeviceList() {
 	state.deviceDetail = [:]
 	state.deviceState = [:]
 
-	apiGet("/api/getstationsdata") { response ->
+	apiGet("/api/devicelist") { response ->
 		response.data.body.devices.each { value ->
 			def key = value._id
 			deviceList[key] = "${value.station_name}: ${value.module_name}"
 			state.deviceDetail[key] = value
             state.deviceState[key] = value.dashboard_data
-            value.modules.each { value2 ->            
+		}
-                def key2 = value2._id
+		response.data.body.modules.each { value ->
-                deviceList[key2] = "${value.station_name}: ${value2.module_name}"
+			def key = value._id
-                state.deviceDetail[key2] = value2
+			deviceList[key] = "${state.deviceDetail[value.main_device].station_name}: ${value.module_name}"
-                state.deviceState[key2] = value2.dashboard_data            
+			state.deviceDetail[key] = value
-            }
+            state.deviceState[key] = value.dashboard_data
 		}
 	}
 
@@ -453,7 +448,6 @@ def listDevices() {
 }
 
 def apiGet(String path, Map query, Closure callback) {
-
 	if(now() >= state.tokenExpires) {
 		refreshToken();
 	}
@@ -473,16 +467,12 @@ def apiGet(String path, Map query, Closure callback) {
 	} catch (Exception e) {
 		// This is most likely due to an invalid token. Try to refresh it and try again.
 		log.debug "apiGet: Call failed $e"
-        if(refreshToken()) {
+		if(refreshToken()) {
-            log.debug "apiGet: Trying again after refreshing token"
+			log.debug "apiGet: Trying again after refreshing token"
-            try {
+			httpGet(params)	{ response ->
-                httpGet(params)	{ response ->
+				callback.call(response)
-                    callback.call(response)
+			}
-                }
+		}
-            } catch (Exception f) {
-                log.debug "apiGet: Call failed $f"
-            }
-        }
 	}
 }
 
@@ -571,4 +561,4 @@ private Boolean hasAllHubsOver(String desiredFirmware) {
 
 private List getRealHubFirmwareVersions() {
 	return location.hubs*.firmwareVersionString.findAll { it }
-}
+}

smartapps/michaelstruck/color-coordinator.src/color-coordinator.groovy

@@ -1,11 +1,10 @@
 /**
  * 	Color Coordinator 
- *  Version 1.1.1 - 11/9/16
+ *  Version 1.1.0 - 11/9/16
  *  By Michael Struck
  *
  *  1.0.0 - Initial release
  *  1.1.0 - Fixed issue where master can be part of slaves. This causes a loop that impacts SmartThings. 
- *  1.1.1 - Fix NPE being thrown for slave/master inputs being empty.
  *
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
@@ -34,17 +33,17 @@ preferences {
 
 def mainPage() {
 	dynamicPage(name: "mainPage", title: "", install: true, uninstall: false) {
-		def masterInList = slaves?.id?.find{it==master?.id}
+		def masterInList = slaves.id.find{it==master.id}
         if (masterInList) {
         	section ("**WARNING**"){
             	paragraph "You have included the Master Light in the Slave Group. This will cause a loop in execution. Please remove this device from the Slave Group.", image: "https://raw.githubusercontent.com/MichaelStruck/SmartThingsPublic/master/img/caution.png"
             }
         }
         section("Master Light") {
-			input "master", "capability.colorControl", title: "Colored Light", required: true
+			input "master", "capability.colorControl", title: "Colored Light"
 		}
 		section("Lights that follow the master settings") {
-			input "slaves", "capability.colorControl", title: "Colored Lights",  multiple: true, required: true, submitOnChange: true
+			input "slaves", "capability.colorControl", title: "Colored Lights",  multiple: true, required: false, submitOnChange: true
 		}
     	section([mobileOnly:true], "Options") {
 			input "randomYes", "bool",title: "When Master Turned On, Randomize Color", defaultValue: false
@@ -82,44 +81,40 @@ def init() {
 }
 //-----------------------------------
 def onOffHandler(evt){
-	if (slaves && master) {
+	if (!slaves.id.find{it==master.id}){
-		if (!slaves?.id.find{it==master?.id}){
+        if (master.currentValue("switch") == "on"){
-		if (master?.currentValue("switch") == "on"){
+            if (randomYes) getRandomColorMaster()
-		    if (randomYes) getRandomColorMaster()
+			else slaves?.on()
-				else slaves?.on()
+        }
-		}
+        else {
-		else {
+            slaves?.off()  
-		    slaves?.off()  
+        }
-		}
-		}
 	}
 }
 
 def colorHandler(evt) {
-	if (slaves && master) {
+   	if (!slaves.id.find{it==master.id} && master.currentValue("switch") == "on"){
-		if (!slaves?.id?.find{it==master?.id} && master?.currentValue("switch") == "on"){
+		log.debug "Changing Slave units H,S,L"
-			log.debug "Changing Slave units H,S,L"
+    	def dimLevel = master.currentValue("level")
-		def dimLevel = master?.currentValue("level")
+    	def hueLevel = master.currentValue("hue")
-		def hueLevel = master?.currentValue("hue")
+    	def saturationLevel = master.currentValue("saturation")
-		def saturationLevel = master.currentValue("saturation")
+		def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
-			def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
+    	slaves?.setColor(newValue)
-		slaves?.setColor(newValue)
+    	try {
-		try {
+    		log.debug "Changing Slave color temp"
-			log.debug "Changing Slave color temp"
+        	def tempLevel = master.currentValue("colorTemperature")
-			def tempLevel = master?.currentValue("colorTemperature")
+    		slaves?.setColorTemperature(tempLevel)
-			slaves?.setColorTemperature(tempLevel)
+    	}
-		}
+   		catch (e){
-			catch (e){
+    		log.debug "Color temp for master --"
-			log.debug "Color temp for master --"
+    	}
-		}
-		}
 	}
 }
 
 def getRandomColorMaster(){
     def hueLevel = Math.floor(Math.random() *1000)
     def saturationLevel = Math.floor(Math.random() * 100)
-    def dimLevel = master?.currentValue("level")
+    def dimLevel = master.currentValue("level")
 	def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
     log.debug hueLevel
     log.debug saturationLevel
@@ -128,14 +123,12 @@ def getRandomColorMaster(){
 }
 
 def tempHandler(evt){
-	if (slaves && master) {
+    if (!slaves.id.find{it==master.id} && master.currentValue("switch") == "on"){
-	    if (!slaves?.id?.find{it==master?.id} && master?.currentValue("switch") == "on"){
+        if (evt.value != "--") {
-		if (evt.value != "--") {
+            log.debug "Changing Slave color temp based on Master change"
-		    log.debug "Changing Slave color temp based on Master change"
+            def tempLevel = master.currentValue("colorTemperature")
-		    def tempLevel = master.currentValue("colorTemperature")
+            slaves?.setColorTemperature(tempLevel)
-		    slaves?.setColorTemperature(tempLevel)
+        }
-		}
-		}
 	}
 }
 
@@ -146,7 +139,7 @@ private def textAppName() {
 }	
 
 private def textVersion() {
-    def text = "Version 1.1.1 (12/13/2016)"
+    def text = "Version 1.1.0 (11/09/2016)"
 }
 
 private def textCopyright() {
@@ -173,4 +166,4 @@ private def textHelp() {
     	"This application will allow you to control the settings of multiple colored lights with one control. " +
         "Simply choose a master control light, and then choose the lights that will follow the settings of the master, "+
         "including on/off conditions, hue, saturation, level and color temperature. Also includes a random color feature."
-}
+}

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -1,3 +1,7 @@
+import javax.crypto.Mac;
+import javax.crypto.spec.SecretKeySpec;
+import java.security.InvalidKeyException;
+
 /**
  *  OpenT2T SmartApp Test
  *
@@ -14,14 +18,14 @@
  *
  */
 definition(
-		name: "OpenT2T SmartApp Test",
+	name: "OpenT2T SmartApp Test",
-		namespace: "opent2t",
+	namespace: "opent2t",
-		author: "OpenT2T",
+	author: "OpenT2T",
-		description: "Test app to test end to end SmartThings scenarios via OpenT2T",
+	description: "Test app to test end to end SmartThings scenarios via OpenT2T",
-		category: "SmartThings Labs",
+	category: "SmartThings Labs",
-		iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-		iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-		iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+	iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
 
 /** --------------------+---------------+-----------------------+------------------------------------
  *  Device Type         | Attribute Name| Commands              | Attribute Values
@@ -39,7 +43,7 @@ definition(
  *  garageDoors         | door          | open, close           | unknown, closed, open, closing, opening
  *  cameras             | image         | take                  | <String>
  *  thermostats         | thermostat    | setHeatingSetpoint,   | temperature, heatingSetpoint, coolingSetpoint,
- * 	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
+ *	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
  *                      |				| off, heat, cool, auto,| thermostatFanMode, thermostatOperatingState
  *                      |				| emergencyHeat,        |
  *                      |				| setThermostatMode,    |
@@ -52,92 +56,104 @@ definition(
 //Device Inputs
 preferences {
 	section("Allow OpenT2T to control these things...") {
-		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false
+		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false, hideWhenEmpty: true
-		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
+		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false, hideWhenEmpty: true
-		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
+ 		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false, hideWhenEmpty: true
-		input "cameras", "capability.videoCapture", title: "Which Cameras?", multiple: true, required: false
+		input "cameras", "capability.videoCapture", title: "Which Cameras?",  multiple: true, required: false, hideWhenEmpty: true
-		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false
+		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false, hideWhenEmpty: true
-		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false
+		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false, hideWhenEmpty: true
-		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false
+		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false, hideWhenEmpty: true
-		input "thermostats", "capability.thermostat", title: "Which Thermostat?", multiple: true, required: false
+		input "thermostats", "capability.thermostat", title: "Which Thermostat?", multiple: true, required: false, hideWhenEmpty: true
-		input "waterSensors", "capability.waterSensor", title: "Which Water Leak Sensors?", multiple: true, required: false
+		input "waterSensors", "capability.waterSensor", title: "Which Water Leak Sensors?", multiple: true, required: false, hideWhenEmpty: true
 	}
 }
 
 def getInputs() {
 	def inputList = []
-	inputList += contactSensors ?: []
+	inputList += contactSensors?: []
-	inputList += garageDoors ?: []
+	inputList += garageDoors?: []
-	inputList += locks ?: []
+	inputList += locks?: []
-	inputList += cameras ?: []
+	inputList += cameras?: []
-	inputList += motionSensors ?: []
+	inputList += motionSensors?: []
-	inputList += presenceSensors ?: []
+	inputList += presenceSensors?: []
-	inputList += switches ?: []
+	inputList += switches?: []
-	inputList += thermostats ?: []
+	inputList += thermostats?: []
-	inputList += waterSensors ?: []
+	inputList += waterSensors?: []
-	return inputList
+    return inputList
 }
 
 //API external Endpoints
 mappings {
-	path("/subscriptionURL/:url") {
-		action:
-		[
-				PUT: "updateEndpointURL"
-		]
-	}
-	path("/connectionId/:connId") {
-		action:
-		[
-				PUT: "updateConnectionId"
-		]
-	}
 	path("/devices") {
-		action:
+		action: [
-		[
+			GET: "getDevices"
-				GET: "getDevices"
 		]
 	}
 	path("/devices/:id") {
-		action:
+		action: [
-		[
+			GET: "getDevice"
-				GET: "getDevice"
 		]
 	}
 	path("/update/:id") {
-		action:
+		action: [
-		[
+		  PUT: "updateDevice"
-				PUT: "updateDevice"
 		]
 	}
-	path("/subscription/:id") {
+	path("/deviceSubscription") {
-		action:
+		action: [
-		[
+		  POST: "registerDeviceChange",
-				POST  : "registerDeviceChange",
+		  DELETE: "unregisterDeviceChange"
-				DELETE: "unregisterDeviceChange"
+		]
+	}
+    path("/locationSubscription") {
+		action: [
+		  POST: "registerDeviceGraph",
+		  DELETE: "unregisterDeviceGraph"
 		]
 	}
 }
 
 def installed() {
-	log.debug "Installed with settings: ${settings}"
+	log.debug "Installing with settings: ${settings}"
 	initialize()
 }
 
 def updated() {
-	log.debug "Updated with settings: ${settings}"
+	log.debug "Updating with settings: ${settings}"
+	
+    //Initialize state variables if didn't exist.
+    if( state.deviceSubscriptionMap == null ){
+		state.deviceSubscriptionMap = [:]
+		log.debug "deviceSubscriptionMap created."
+	}
+    if( state.locationSubscriptionMap == null ){
+		state.locationSubscriptionMap = [:]
+		log.debug "locationSubscriptionMap created."
+	}
+    if(state.verificationKeyMap == null){
+    	state.verificationKeyMap = [:]
+		log.debug "verificationKeyMap created."
+    }
+    
 	unsubscribe()
-	registerSubscriptions()
+	registerAllDeviceSubscriptions()
 }
 
 def initialize() {
-	state.connectionId = ""
+	log.debug "Initializing with settings: ${settings}"
-	state.endpointURL = "https://ifs.windows-int.com/v1/cb/81C7E77B-EABC-488A-B2BF-FEC42F0DABD2/notify"
+	state.deviceSubscriptionMap = [:]
-	registerSubscriptions()
+	log.debug "deviceSubscriptionMap created."
+    state.locationSubscriptionMap = [:]
+	log.debug "locationSubscriptionMap created."
+    state.verificationKeyMap = [:]
+	log.debug "verificationKeyMap created."
+    registerAllDeviceSubscriptions()
 }
 
+/*** Subscription Functions  ***/
+
 //Subscribe events for all devices
-def registerSubscriptions() {
+def registerAllDeviceSubscriptions() {
 	registerChangeHandler(inputs)
 }
 
@@ -145,134 +161,292 @@ def registerSubscriptions() {
 def registerChangeHandler(myList) {
 	myList.each { myDevice ->
 		def theAtts = myDevice.supportedAttributes
-		theAtts.each { att ->
+		theAtts.each {att ->
-			subscribe(myDevice, att.name, eventHandler)
+			subscribe(myDevice, att.name, deviceEventHandler)
-			log.info "Registering ${myDevice.displayName}.${att.name}"
+			log.info "Registering for ${myDevice.displayName}.${att.name}"
 		}
 	}
 }
 
 //Endpoints function: Subscribe to events from a specific device
 def registerDeviceChange() {
-	def myDevice = findDevice(params.id)
+	def subscriptionEndpt = params.subscriptionURL
+	def deviceId = params.deviceId
+   	def myDevice = findDevice(deviceId)
+    
+	if( myDevice == null ){
+		httpError(404, "Cannot find device with device ID ${deviceId}.")
+	}
+    
 	def theAtts = myDevice.supportedAttributes
 	try {
-		theAtts.each { att ->
+		theAtts.each {att ->
-			subscribe(myDevice, att.name, eventHandler)
+			subscribe(myDevice, att.name, deviceEventHandler)
-			log.info "Registering ${myDevice.displayName}.${att.name}"
 		}
-		return ["succeed"]
+        log.info "Subscribing for ${myDevice.displayName}"
+
+        if(subscriptionEndpt != null){
+			if(state.deviceSubscriptionMap[deviceId] == null){
+				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
+				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)){
+				// state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
+                // For now, we will only have one subscription endpoint per device
+				state.deviceSubscriptionMap.remove(deviceId)
+				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
+				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			}
+            
+            if(params.key != null){
+            	state.verificationKeyMap[subscriptionEndpt] = params.key
+				log.info "Added verification key: ${params.key} for ${subscriptionEndpt}"
+            }
+        }
 	} catch (e) {
 		httpError(500, "something went wrong: $e")
 	}
+
+	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
+    log.info "Current verification key map is ${state.verificationKeyMap}"
+	return ["succeed"]
 }
 
 //Endpoints function: Unsubscribe to events from a specific device
 def unregisterDeviceChange() {
-	def myDevice = findDevice(params.id)
+	def subscriptionEndpt = params.subscriptionURL
+	def deviceId = params.deviceId
+	def myDevice = findDevice(deviceId)
+    
+	if( myDevice == null ){
+		httpError(404, "Cannot find device with device ID ${deviceId}.")
+	}
+    
 	try {
-		unsubscribe(myDevice)
+		if(subscriptionEndpt != null && subscriptionEndpt != "undefined"){
-		log.info "Unregistering ${myDevice.displayName}"
+			if (state.deviceSubscriptionMap[deviceId]?.contains(subscriptionEndpt)){
-		return ["succeed"]
+				if(state.deviceSubscriptionMap[deviceId].size() == 1){
+					state.deviceSubscriptionMap.remove(deviceId)
+				} else {
+					state.deviceSubscriptionMap[deviceId].remove(subscriptionEndpt)
+				}
+                state.verificationKeyMap.remove(subscriptionEndpt)
+				log.info "Removed subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			}
+        } else {
+			state.deviceSubscriptionMap.remove(deviceId)
+			log.info "Unsubscriping for ${myDevice.displayName}"
+		}
 	} catch (e) {
 		httpError(500, "something went wrong: $e")
 	}
+
+	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
+    log.info "Current verification key map is ${state.verificationKeyMap}"
+}
+
+//Endpoints function: Subscribe to device additiona/removal updated in a location
+def registerDeviceGraph() {
+	def subscriptionEndpt = params.subscriptionURL
+    
+    if (subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+        subscribe(location, "DeviceCreated", locationEventHandler, [filterEvents: false])
+        subscribe(location, "DeviceUpdated", locationEventHandler, [filterEvents: false])
+        subscribe(location, "DeviceDeleted", locationEventHandler, [filterEvents: false])
+
+    	if(state.locationSubscriptionMap[location.id] == null){
+            state.locationSubscriptionMap.put(location.id, [subscriptionEndpt])
+			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+        }else if (!state.locationSubscriptionMap[location.id].contains(subscriptionEndpt)){
+            state.locationSubscriptionMap[location.id] << subscriptionEndpt
+			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+        }
+        
+        if(params.key != null){
+            state.verificationKeyMap[subscriptionEndpt] = params.key
+			log.info "Added verification key: ${params.key} for ${subscriptionEndpt}"
+        }
+        
+        log.info "Current location subscription map is ${state.locationSubscriptionMap}"
+        log.info "Current verification key map is ${state.verificationKeyMap}"
+        return ["succeed"]
+    } else {
+        httpError(400, "missing input parameter: subscriptionURL")
+    }
+}
+
+//Endpoints function: Unsubscribe to events from a specific device
+def unregisterDeviceGraph() {
+	def subscriptionEndpt = params.subscriptionURL
+    
+	try {
+		if(subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+			if (state.locationSubscriptionMap[location.id]?.contains(subscriptionEndpt)){
+				if(state.locationSubscriptionMap[location.id].size() == 1){
+					state.locationSubscriptionMap.remove(location.id)
+				} else {
+					state.locationSubscriptionMap[location.id].remove(subscriptionEndpt)
+				}
+                state.verificationKeyMap.remove(subscriptionEndpt)
+				log.info "Removed subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+			}
+        }else{
+        	httpError(400, "missing input parameter: subscriptionURL")
+        }
+	} catch (e) {
+		httpError(500, "something went wrong: $e")
+	}
+
+	log.info "Current location subscription map is ${state.locationSubscriptionMap}"
+    log.info "Current verification key map is ${state.verificationKeyMap}"
 }
 
 //When events are triggered, send HTTP post to web socket servers
-def eventHandler(evt) {
+def deviceEventHandler(evt) {
-	def evt_device_id = evt.deviceId
+	def evtDevice = evt.device
-	def evt_device_value = evt.value
+	def evtDeviceType = getDeviceType(evtDevice)
-	def evt_name = evt.name
+	def deviceData = [];
-	def evt_device = evt.device
+   	
-	def evt_deviceType = getDeviceType(evt_device);
+    if(evt.data != null){
-	def params = [
+		def evtData = parseJson(evt.data)
-			uri : "${state.endpointURL}/${state.connectionId}",
+		log.info "Received event for ${evtDevice.displayName}, data: ${evtData},  description: ${evt.descriptionText}"
-			body: [
+	}
-					name        : evt_device.displayName,
+    
-					id          : evt_device.id,
+    if(evtDeviceType == "thermostat") {
-					deviceType  : evt_deviceType,
+		deviceData = [name: evtDevice.displayName, id: evtDevice.id, status:evtDevice.status, deviceType:evtDeviceType, manufacturer:evtDevice.manufacturerName, model:evtDevice.modelName, attributes: deviceAttributeList(evtDevice, evtDeviceType), locationMode: getLocationModeInfo(), locationId: location.id ]
-					manufacturer: evt_device.getManufacturerName(),
+	} else {
-					model       : evt_device.getModelName(),
+		deviceData = [name: evtDevice.displayName, id: evtDevice.id, status:evtDevice.status, deviceType:evtDeviceType, manufacturer:evtDevice.manufacturerName, model:evtDevice.modelName, attributes: deviceAttributeList(evtDevice, evtDeviceType), locationId: location.id ]
-					attributes  : deviceAttributeList(evt_device)
+	}
-			]
+    
-	]
+    def params = [ body: deviceData ]
-	try {
+    
+	//send event to all subscriptions urls
+	log.debug "Current subscription urls for ${evtDevice.displayName} is ${state.deviceSubscriptionMap[evtDevice.id]}"
+	state.deviceSubscriptionMap[evtDevice.id].each {
+		params.uri = "${it}"
+        if(state.verificationKeyMap[it] != null ){
+        	def key = state.verificationKeyMap[it]
+            params.header = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
+        }
 		log.trace "POST URI: ${params.uri}"
+        log.trace "Header: ${params.header}"
 		log.trace "Payload: ${params.body}"
-		httpPostJson(params) { resp ->
+		try{
-			resp.headers.each {
+			httpPostJson(params) { resp ->
-				log.debug "${it.name} : ${it.value}"
+				log.trace "response status code: ${resp.status}"
+				log.trace "response data: ${resp.data}"
 			}
-			log.trace "response status code: ${resp.status}"
+		} catch (e) {
-			log.trace "response data: ${resp.data}"
+			log.error "something went wrong: $e"
 		}
-	} catch (e) {
-		log.debug "something went wrong: $e"
 	}
 }
 
-//Endpoints function: update subcription endpoint url [state.endpoint]
+def locationEventHandler(evt) {
-void updateEndpointURL() {
+	log.info "Received event for location ${location.name}/${location.id}, Event: ${evt.name}, description: ${evt.descriptionText}, apiServerUrl: ${apiServerUrl("")}"
-	state.endpointURL = params.url
+    switch(evt.name){
-	log.info "Updated EndpointURL to ${state.endpointURL}"
+    	case "DeviceCreated":
+        case "DeviceDeleted":
+        	def evtDevice = evt.device
+            def evtDeviceType = getDeviceType(evtDevice)
+            def params = [ body: [ eventType:evt.name, deviceId: evtDevice.id, locationId: location.id ] ]
+            
+            if (evt.name == "DeviceDeleted" && state.deviceSubscriptionMap[deviceId] != null){
+            	state.deviceSubscriptionMap.remove(evtDevice.id)
+            }
+        
+            state.locationSubscriptionMap[location.id].each {
+                params.uri = "${it}"
+                if(state.verificationKeyMap[it] != null ){
+                    def key = state.verificationKeyMap[it]
+                    params.header = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
+                }
+                log.trace "POST URI: ${params.uri}"
+				log.trace "Header: ${params.header}"
+                log.trace "Payload: ${params.body}"
+                try{
+                    httpPostJson(params) { resp ->
+                        log.trace "response status code: ${resp.status}"
+                        log.trace "response data: ${resp.data}"
+                    }
+                } catch (e) {
+                    log.error "something went wrong: $e"
+                }
+            }
+    	case "DeviceUpdated":
+        default:
+        break
+    }
 }
 
-//Endpoints function: update global variable [state.connectionId]
+private ComputHMACValue(key, data){
-void updateConnectionId() {
+	try {
-	def connId = params.connId
+        SecretKeySpec secretKeySpec = new SecretKeySpec(key.getBytes("UTF-8"), "HmacSHA1")
-	state.connectionId = connId
+		Mac mac = Mac.getInstance("HmacSHA1")
-	log.info "Updated ConnectionID to ${state.connectionId}"
+		mac.init(secretKeySpec)
+		byte[] digest = mac.doFinal(data.getBytes("UTF-8"))
+		return byteArrayToString(digest)
+	} catch (InvalidKeyException e) {  
+     	log.error "Invalid key exception while converting to HMac SHA1"
+	}
 }
 
+private def byteArrayToString(byte[] data) {
+	BigInteger bigInteger = new BigInteger(1, data)
+    String hash = bigInteger.toString(16)
+	return hash
+}
+
+/*** Device Query/Update Functions  ***/
+
 //Endpoints function: return all device data in json format
 def getDevices() {
-	def deviceData = []
+	def deviceData = [] 
 	inputs?.each {
 		def deviceType = getDeviceType(it)
-		if (deviceType == "thermostat") {
+		if(deviceType == "thermostat") {
-			deviceData << [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
+			deviceData << [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType), locationMode: getLocationModeInfo()]
 		} else {
-			deviceData << [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it)]
+			deviceData << [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType)]
-		}
+		} 
 	}
-
+ 
 	log.debug "getDevices, return: ${deviceData}"
 	return deviceData
 }
 
 //Endpoints function: get device data
-def getDevice() {
+def getDevice() {	
 	def it = findDevice(params.id)
 	def deviceType = getDeviceType(it)
 	def device
-	if (deviceType == "thermostat") {
+	if(deviceType == "thermostat") {
-		device = [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
+		device = [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it,deviceType), locationMode: getLocationModeInfo()]
 	} else {
-		device = [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it)]
+		device = [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType)]
 	}
+
 	log.debug "getDevice, return: ${device}"
 	return device
 }
 
 //Endpoints function: update device data
-void updateDevice() {
+void updateDevice() {	
 	def device = findDevice(params.id)
-	request.JSON.each {
+	request.JSON.each {   
 		def command = it.key
 		def value = it.value
-		if (command) {
+		if (command){
 			def commandList = mapDeviceCommands(command, value)
 			command = commandList[0]
 			value = commandList[1]
-
+			
 			if (command == "setAwayMode") {
 				log.info "Setting away mode to ${value}"
-				if (location.modes?.find { it.name == value }) {
+				if (location.modes?.find {it.name == value}) {
 					location.setMode(value)
 				}
-			} else if (command == "thermostatSetpoint") {
+			}else if (command == "thermostatSetpoint"){
-				switch (device.currentThermostatMode) {
+				switch(device.currentThermostatMode){
 					case "cool":
 						log.info "Update: ${device.displayName}, [${command}, ${value}]"
 						device.setCoolingSetpoint(value)
@@ -286,7 +460,7 @@ void updateDevice() {
 						httpError(501, "this mode: ${device.currentThermostatMode} does not allow changing thermostat setpoint.")
 						break
 				}
-			} else if (!device) {
+			}else if (!device) {
 				log.error "updateDevice, Device not found"
 				httpError(404, "Device not found")
 			} else if (!device.hasCommand(command)) {
@@ -296,11 +470,11 @@ void updateDevice() {
 				if (command == "setColor") {
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(hex: value)
-				} else if (value.isNumber()) {
+				} else if(value.isNumber()) {
 					def intValue = value as Integer
 					log.info "Update: ${device.displayName}, [${command}, ${intValue}(int)]"
 					device."$command"(intValue)
-				} else if (value) {
+				} else if (value){
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(value)
 				} else {
@@ -322,24 +496,30 @@ private getLocationModeInfo() {
 //Map each device to a type given it's capabilities
 private getDeviceType(device) {
 	def deviceType
-	def caps = device.capabilities
+	def capabilities = device.capabilities
-	log.debug "capabilities: [${device}, ${caps}]"
+	log.debug "capabilities: [${device}, ${capabilities}]"
 	log.debug "supported commands: [${device}, ${device.supportedCommands}]"
-	caps.each {
+    
-		switch (it.name.toLowerCase()) {
+	//Loop through the device capability list to determine the device type.
+	capabilities.each {capability ->
+		switch(capability.name.toLowerCase())
+		{
 			case "switch":
 				deviceType = "switch"
-				if (caps.any { it.name.toLowerCase() == "power meter" }) {
+
-					return deviceType
+				//If the device also contains "Switch Level" capability, identify it as a "light" device.
-				}
+				if (capabilities.any{it.name.toLowerCase() == "switch level"}){
-				if (caps.any { it.name.toLowerCase() == "switch level" }) {
+                	
-					deviceType = "light"
+                    //If the device also contains "Power Meter" capability, identify it as a "dimmerSwitch" device.
-					return deviceType
+                    if (capabilities.any{it.name.toLowerCase() == "power meter"}){
-				}
+                        deviceType = "dimmerSwitch"
+                        return deviceType
+                    } else {
+                        deviceType = "light"
+                        return deviceType
+                    }
+                }
 				break
-			case "contact sensor":
-				deviceType = "contactSensor"
-				return deviceType
 			case "garageDoorControl":
 				deviceType = "garageDoor"
 				return deviceType
@@ -349,17 +529,15 @@ private getDeviceType(device) {
 			case "video camera":
 				deviceType = "camera"
 				return deviceType
-			case "motion sensor":
-				deviceType = "motionSensor"
-				return deviceType
-			case "presence sensor":
-				deviceType = "presenceSensor"
-				return deviceType
 			case "thermostat":
 				deviceType = "thermostat"
-				return deviceType
+				return deviceType    
+			case "acceleration sensor":
+			case "contact sensor":
+			case "motion sensor":
+			case "presence sensor":
 			case "water sensor":
-				deviceType = "waterSensor"
+				deviceType = "genericSensor"
 				return deviceType
 			default:
 				break
@@ -372,19 +550,38 @@ private getDeviceType(device) {
 private findDevice(deviceId) {
 	return inputs?.find { it.id == deviceId }
 }
-
+ 
 //Return a list of device attributes
-private deviceAttributeList(device) {
+private deviceAttributeList(device, deviceType) {
-	device.supportedAttributes.collectEntries { attribute ->
+	def attributeList = [:]
-		try {
+	def allAttributes = device.supportedAttributes
-			[(attribute.name): device.currentValue(attribute.name)]
+	allAttributes.each { attribute ->
-		} catch (e) {
+        	try {
-			[(attribute.name): null]
+			def currentState = device.currentState(attribute.name)
+            		if(currentState != null ){
+                		switch(attribute.name){
+                    		case 'temperature':
+                        		attributeList.putAll([ (attribute.name): currentState.value, 'temperatureScale':location.temperatureScale ])
+                        		break;
+	                    	default:
+        	                	attributeList.putAll([(attribute.name): currentState.value ])
+                	        	break;
+                		}
+                		if( deviceType == "genericSensor" ){
+                    			def key = attribute.name + "_lastUpdated"
+                			attributeList.putAll([ (key): currentState.isoDate ])
+                		}
+	            	} else {
+            			attributeList.putAll([ (attribute.name): null ]);
+            		}
+		} catch(e) {
+			attributeList.putAll([ (attribute.name): null ]);
 		}
 	}
+    return attributeList
 }
 
-//Map device command and value.
+//Map device command and value. 
 //input command and value are from UWP,
 //returns resultCommand and resultValue that corresponds with function and value in SmartApps
 private mapDeviceCommands(command, value) {
@@ -401,7 +598,7 @@ private mapDeviceCommands(command, value) {
 				resultValue = ""
 			}
 			break
-	// light attributes
+		// light attributes
 		case "level":
 			resultCommand = "setLevel"
 			resultValue = value
@@ -414,14 +611,14 @@ private mapDeviceCommands(command, value) {
 			resultCommand = "setSaturation"
 			resultValue = value
 			break
-		case "ct":
+		case "colorTemperature":
 			resultCommand = "setColorTemperature"
 			resultValue = value
 			break
-		case "color":
+		case "color":	
 			resultCommand = "setColor"
 			resultValue = value
-	// thermostat attributes
+		// thermostat attributes
 		case "hvacMode":
 			resultCommand = "setThermostatMode"
 			resultValue = value
@@ -438,7 +635,7 @@ private mapDeviceCommands(command, value) {
 			resultCommand = "setCoolingSetpoint"
 			resultValue = value
 			break
-		case "heatingSetpoint":
+		case "heatingSetpoint":	
 			resultCommand = "setHeatingSetpoint"
 			resultValue = value
 			break
@@ -446,20 +643,20 @@ private mapDeviceCommands(command, value) {
 			resultCommand = "thermostatSetpoint"
 			resultValue = value
 			break
-	// lock attributes
+		// lock attributes
 		case "locked":
 			if (value == 1 || value == "1" || value == "lock") {
 				resultCommand = "lock"
 				resultValue = ""
-			} else if (value == 0 || value == "0" || value == "unlock") {
+			}
+			else if (value == 0 || value == "0" || value == "unlock") {
 				resultCommand = "unlock"
 				resultValue = ""
 			}
 			break
 		default:
 			break
-	}
+	 }
-
+	 
-	return [resultCommand, resultValue]
+	 return [resultCommand,resultValue]
-}
+}
-

smartapps/osotech/plantlink-connector.src/plantlink-connector.groovy

@@ -57,7 +57,7 @@ def authPage(){
         atomicState.accessToken = state.accessToken
     }
 
-    def redirectUrl = oauthInitUrl()
+	def redirectUrl = oauthInitUrl()
     def uninstallAllowed = false
     def oauthTokenProvided = false
     if(atomicState.authToken){
@@ -78,9 +78,9 @@ def authPage(){
         }
     }else{
         return dynamicPage(name: "auth", title: "Step 1 of 2 - Completed", nextPage:"deviceList", uninstall:uninstallAllowed) {
-            section(){
+	        section(){
                paragraph "You are logged in to myplantlink.com, tap next to continue", image: iconUrl
-               href(url:redirectUrl, title:"Or", description:"tap to switch accounts")
+ 			   href(url:redirectUrl, title:"Or", description:"tap to switch accounts")
             }
         }
     }
@@ -137,44 +137,36 @@ def dock_sensor(device_serial, expected_plant_name) {
             contentType: "application/json",
     ]
     log.debug "Creating new plant on myplantlink.com - ${expected_plant_name}"
-    try {
+    httpPost(docking_params) { docking_response ->
-        httpPost(docking_params) { docking_response ->
+        if (parse_api_response(docking_response, "Docking a link")) {
-            if (parse_api_response(docking_response, "Docking a link")) {
+            if (docking_response.data.plants.size() == 0) {
-                if (docking_response.data.plants.size() == 0) {
+                log.debug "creating plant for - ${expected_plant_name}"
-                    log.debug "creating plant for - ${expected_plant_name}"
+                plant_post_body_map["name"] = expected_plant_name
-                    plant_post_body_map["name"] = expected_plant_name
+                plant_post_body_map['links_key'] = [docking_response.data.key]
-                    plant_post_body_map['links_key'] = [docking_response.data.key]
+                def plant_post_body_json_builder = new JsonBuilder(plant_post_body_map)
-                    def plant_post_body_json_builder = new JsonBuilder(plant_post_body_map)
+                plant_post_params["body"] = plant_post_body_json_builder.toString()
-                    plant_post_params["body"] = plant_post_body_json_builder.toString()
+                httpPost(plant_post_params) { plant_post_response ->
-                    try {
+                    if(parse_api_response(plant_post_response, 'creating plant')){
-                        httpPost(plant_post_params) { plant_post_response ->
+                        def attached_map = atomicState.attached_sensors
-                            if(parse_api_response(plant_post_response, 'creating plant')){
+                        attached_map[device_serial] = plant_post_response.data
-                                def attached_map = atomicState.attached_sensors
+                        atomicState.attached_sensors = attached_map
-                                attached_map[device_serial] = plant_post_response.data
-                                atomicState.attached_sensors = attached_map
-                            }
-                        }
-                    } catch (Exception f) {
-                        log.debug "call failed $f"
                     }
-                } else {
-                    def plant = docking_response.data.plants[0]
-                    def attached_map = atomicState.attached_sensors
-                    attached_map[device_serial] = plant
-                    atomicState.attached_sensors = attached_map
-                    checkAndUpdatePlantIfNeeded(plant, expected_plant_name)
                 }
+            } else {
+                def plant = docking_response.data.plants[0]
+                def attached_map = atomicState.attached_sensors
+                attached_map[device_serial] = plant
+                atomicState.attached_sensors = attached_map
+                checkAndUpdatePlantIfNeeded(plant, expected_plant_name)
             }
         }
-    } catch (Exception e) {
-        log.debug "call failed $e"
     }
     return true
 }
 
 def checkAndUpdatePlantIfNeeded(plant, expected_plant_name){
     def plant_put_params = [
-        uri : appSettings.https_plantLinkServer,
+		uri : appSettings.https_plantLinkServer,
         headers : ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
         contentType : "application/json"
     ]
@@ -182,16 +174,12 @@ def checkAndUpdatePlantIfNeeded(plant, expected_plant_name){
         log.debug "updating plant for - ${expected_plant_name}"
         plant_put_params["path"] = "/api/v1/plants/${plant.key}"
         def plant_put_body_map = [
-            name: expected_plant_name
+			name: expected_plant_name
         ]
         def plant_put_body_json_builder = new JsonBuilder(plant_put_body_map)
         plant_put_params["body"] = plant_put_body_json_builder.toString()
-        try {
+        httpPut(plant_put_params) { plant_put_response ->
-            httpPut(plant_put_params) { plant_put_response ->
+            parse_api_response(plant_put_response, 'updating plant name')
-                parse_api_response(plant_put_response, 'updating plant name')
-            }
-        } catch (Exception e) {
-            log.debug "call failed $e"
         }
     }
 }
@@ -210,29 +198,25 @@ def moistureHandler(event){
                 contentType: "application/json",
                 body: event.value
         ]
-        try {
+        httpPost(measurement_post_params) { measurement_post_response ->
-            httpPost(measurement_post_params) { measurement_post_response ->
+            if (parse_api_response(measurement_post_response, 'creating moisture measurement') &&
-                if (parse_api_response(measurement_post_response, 'creating moisture measurement') &&
+                    measurement_post_response.data.size() >0){
-                        measurement_post_response.data.size() >0){
+                def measurement = measurement_post_response.data[0]
-                    def measurement = measurement_post_response.data[0]
+                def plant =  measurement.plant
-                    def plant =  measurement.plant
+                log.debug plant
-                    log.debug plant
+                checkAndUpdatePlantIfNeeded(plant, expected_plant_name)
-                    checkAndUpdatePlantIfNeeded(plant, expected_plant_name)
+                plantlinksensors.each{ sensor_device ->
-                    plantlinksensors.each{ sensor_device ->
+                    if (sensor_device.id == event.deviceId){
-                        if (sensor_device.id == event.deviceId){
+                        sensor_device.setStatusIcon(plant.status)
-                            sensor_device.setStatusIcon(plant.status)
+                        if (plant.last_measurements && plant.last_measurements[0].moisture){
-                            if (plant.last_measurements && plant.last_measurements[0].moisture){
+                            sensor_device.setPlantFuelLevel(plant.last_measurements[0].moisture * 100 as int)
-                                sensor_device.setPlantFuelLevel(plant.last_measurements[0].moisture * 100 as int)
+                        }
-                            }
+                        if (plant.last_measurements && plant.last_measurements[0].battery){
-                            if (plant.last_measurements && plant.last_measurements[0].battery){
+                            sensor_device.setBatteryLevel(plant.last_measurements[0].battery * 100 as int)
-                                sensor_device.setBatteryLevel(plant.last_measurements[0].battery * 100 as int)
-                            }
                         }
                     }
                 }
             }
-        } catch (Exception e) {
-            log.debug "call failed $e"
         }
     }
 }
@@ -251,12 +235,8 @@ def batteryHandler(event){
                 contentType: "application/json",
                 body: event.value
         ]
-        try {
+        httpPost(measurement_post_params) { measurement_post_response ->
-            httpPost(measurement_post_params) { measurement_post_response ->
+            parse_api_response(measurement_post_response, 'creating battery measurement')
-                parse_api_response(measurement_post_response, 'creating battery measurement')
-            }
-        } catch (Exception e) {
-            log.debug "call failed $e"
         }
     }
 }
@@ -268,7 +248,7 @@ def getDeviceSerialFromEvent(event){
 }
 
 def oauthInitUrl(){
-    atomicState.oauthInitState = UUID.randomUUID().toString()
+	atomicState.oauthInitState = UUID.randomUUID().toString()
     def oauthParams = [
             response_type: "code",
             client_id: appSettings.client_id,
@@ -295,12 +275,8 @@ def swapToken(){
     ]
 
     def jsonMap
-    try {
+    httpPost(postParams) { resp ->
-        httpPost(postParams) { resp ->
+        jsonMap = resp.data
-            jsonMap = resp.data
-        }
-    } catch (Exception e) {
-        log.debug "call failed $e"
     }
 
     atomicState.refreshToken = jsonMap.refresh_token
@@ -311,33 +287,33 @@ def swapToken(){
 <head>
 <meta name="viewport" content="width=device-width, initial-scale=1">
 <style>
-    .container {
+	.container {
-        padding:25px;
+		padding:25px;
-    }
+	}
-    .flex1 {
+	.flex1 {
-        width:33%;
+    	width:33%;
-        float:left;
+		float:left;
-        text-align: center;
+		text-align: center;
-    }
+	}
-    p {
+	p {
-        font-size: 2em;
+		font-size: 2em;
-        font-family: Verdana, Geneva, sans-serif;
+		font-family: Verdana, Geneva, sans-serif;
-        text-align: center;
+		text-align: center;
-        color: #777;
+		color: #777;
-    }
+	}
 </style>
 </head>
 <body>
-    <div class="container">
+	<div class="container">
-        <div class="flex1"><img src="https://dashboard.myplantlink.com/images/PLlogo.png" alt="PlantLink" height="75"/></div>
+		<div class="flex1"><img src="https://dashboard.myplantlink.com/images/PLlogo.png" alt="PlantLink" height="75"/></div>
-        <div class="flex1"><img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected to"  height="25" style="padding-top:25px;" /></div>
+		<div class="flex1"><img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected to"  height="25" style="padding-top:25px;" /></div>
-        <div class="flex1"><img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings" height="75"/></div>
+		<div class="flex1"><img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings" height="75"/></div>
-        <br clear="all">
+		<br clear="all">
   </div>
   <div class="container">
-        <p>Your PlantLink Account is now connected to SmartThings!</p>
+		<p>Your PlantLink Account is now connected to SmartThings!</p>
-        <p style="color:green;">Click <strong>Done</strong> at the top right to finish setup.</p>
+		<p style="color:green;">Click <strong>Done</strong> at the top right to finish setup.</p>
-    </div>
+	</div>
 </body>
 </html>
 """

smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy

@@ -19,9 +19,9 @@
     author: "SmartThings",
     description: "Control your Bose SoundTouch speakers",
     category: "SmartThings Labs",
-    iconUrl: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon.png",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x-1.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
     singleInstance: true
 )
 
@@ -104,7 +104,7 @@ def deviceDiscovery()
 
         return dynamicPage(name:"deviceDiscovery", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
             section("Please wait while we discover your ${getDeviceName()}. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices, submitOnChange: true
+                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices
             }
         }
     }
@@ -196,8 +196,6 @@ def addDevice(){
             d = addChildDevice(getNameSpace(), getDeviceName(), dni, newDevice?.value.hub, [label:"${deviceName}"])
             d.boseSetDeviceID(newDevice.value.deviceID)
             log.trace "Created ${d.displayName} with id $dni"
-            // sync DTH with device, done here as it currently don't work from the DTH's installed() method
-            d.refresh()
         } else {
             log.trace "${d.displayName} with id $dni already exists"
         }

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -20,9 +20,6 @@
  *      JLH - 02-15-2014 - Fuller use of ecobee API
  *      10-28-2015 DVCSMP-604 - accessory sensor, DVCSMP-1174, DVCSMP-1111 - not respond to routines
  */
-
-include 'localization'
-
 definition(
 		name: "Ecobee (Connect)",
 		namespace: "smartthings",
@@ -89,7 +86,7 @@ def authPage() {
 			if (numFound > 0)  {
 				section("") {
 					paragraph "Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings."
-					input(name: "ecobeesensors", title: "Select Ecobee Sensors ({{numFound}} found)", messageArgs: [numFound: numFound], type: "enum", required:false, description: "Tap to choose", multiple:true, options:options)
+					input(name: "ecobeesensors", title:"Select Ecobee Sensors (${numFound} found)", type: "enum", required:false, description: "Tap to choose", multiple:true, options:options)
 				}
 			}
 		}

smartapps/smartthings/ecobee-connect.src/i18n/ar.properties

@@ -1,17 +0,0 @@
-'''Connect your Ecobee thermostat to SmartThings.'''.ar=قم بتوصيل ثرموستات Ecobee بـ SmartThings.
-'''You are connected.'''.ar=أنت متصل.
-'''Click to enter Ecobee Credentials'''.ar=النقر لإدخال بيانات اعتماد Ecobee
-'''Login'''.ar=تسجيل الدخول
-'''Tap below to log in to the ecobee service and authorize SmartThings access. Be sure to scroll down on page 2 and press the 'Allow' button.'''.ar=انقر أدناه لتسجيل الدخول إلى خدمة ecobee والمصادقة على الوصول إلى SmartThings. تأكد من التمرير للأسفل على الصفحة ٢ والضغط على زر ”السماح“.
-'''Select Your Thermostats'''.ar=تحديد الثرموستات
-'''Tap below to see the list of ecobee thermostats available in your ecobee account and select the ones you want to connect to SmartThings.'''.ar=انقر أدناه لرؤية قائمة أجهزة ثرموستات ecobee المتوفرة في حساب ecobee، وحدد الأجهزة التي ترغب في توصيلها بـ SmartThings.
-'''Tap to choose'''.ar=النقر لاختيار
-'''Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings.'''.ar=انقر أدناه لرؤية قائمة مستشعرات ecobee المتوفرة في حساب ecobee، وحدد الأجهزة التي ترغب في توصيلها بـ SmartThings.
-'''Select Ecobee Sensors ({{numFound}} found)'''.ar=تحديد مستشعرات Ecobee‏ ‎({{numFound}} found)‎
-'''Your ecobee Account is now connected to SmartThings!'''.ar=حساب ecobee متصل الآن بـ SmartThings!
-'''Click 'Done' to finish setup.'''.ar=انقر فوق ”تم“ لإنهاء الإعداد.
-'''The connection could not be established!'''.ar=يتعذر إنشاء الاتصال!
-'''Click 'Done' to return to the menu.'''.ar=انقر فوق ”تم“ للعودة إلى القائمة.
-'''{{deviceName}} is connected to SmartThings'''.ar={{deviceName}} متصل بـ SmartThings
-'''{{deviceName}} is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials.'''.ar=تم قطع اتصال {{deviceName}} بـ SmartThings، لأن بيانات اعتماد الوصول قد تغيرت أو فُقدت. يُرجى الانتقال إلى التطبيق الذكي Ecobee (Connect)‎ وإعادة إدخال بيانات اعتماد تسجيل الدخول إلى حسابك.
-'''Your Ecobee thermostat'''.ar=ثرموستات Ecobee

smartapps/smartthings/ecobee-connect.src/i18n/th.properties

@@ -1,17 +0,0 @@
-'''Connect your Ecobee thermostat to SmartThings.'''.th=เชื่อมต่อตัวควบคุมอุณหภูมิ Ecobee ของคุณเข้ากับ SmartThings
-'''You are connected.'''.th=คุณได้เชื่อมต่อแล้ว
-'''Click to enter Ecobee Credentials'''.th=คลิกเพื่อใส่ ข้อมูลยืนยันตัวตน Ecobee
-'''Login'''.th=เข้าสู่ระบบ
-'''Tap below to log in to the ecobee service and authorize SmartThings access. Be sure to scroll down on page 2 and press the 'Allow' button.'''.th=แตะด้านล่างเพื่อเข้าสู่บริการ Ecobee และอนุญาตการเข้าถึงของ SmartThings ดูให้แน่ใจว่าได้เลื่อนลงมาที่หน้า 2 แล้วกดปุ่ม 'อนุญาต'
-'''Select Your Thermostats'''.th=เลือกตัวควบคุมอุณหภูมิของคุณ
-'''Tap below to see the list of ecobee thermostats available in your ecobee account and select the ones you want to connect to SmartThings.'''.th=แตะที่ด้านล่างเพื่อดูรายการตัวควบคุมอุณหภูมิ Ecobee ที่มีอยู่ในบัญชีผู้ใช้ Ecobee ของคุณ และเลือกตัวควบคุมอุณหภูมิที่คุณต้องการจะเชื่อมต่อกับ SmartThings
-'''Tap to choose'''.th=แตะเพื่อเลือก
-'''Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings.'''.th=แตะที่ด้านล่างเพื่อดูรายการเซ็นเซอร์ Ecobee ที่มีอยู่ในบัญชีผู้ใช้ Ecobee ของคุณ และเลือกเซ็นเซอร์ที่คุณต้องการจะเชื่อมต่อกับ SmartThings
-'''Select Ecobee Sensors ({{numFound} found)'''.th=เลือกเซ็นเซอร์ Ecobee ({{numFound}} found)
-'''Your ecobee Account is now connected to SmartThings!'''.th=ตอนนี้บัญชีผู้ใช้ Ecobee ของคุณเชื่อมต่อกับ SmartThings แล้ว
-'''Click 'Done' to finish setup.'''.th=คลิก 'เสร็จสิ้น' เพื่อทำการตั้งค่าให้เสร็จสิ้น
-'''The connection could not be established!'''.th=ไม่สามารถสร้างการเชื่อมต่อได้!
-'''Click 'Done' to return to the menu.'''.th=คลิก 'เสร็จสิ้น' เพื่อกลับไปยังเมนู
-'''{{deviceName}} is connected to SmartThings'''.th={{deviceName}} เชื่อมต่อกับ SmartThings แล้ว
-'''{{deviceName}} is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials.'''.th={{deviceName}} ถูกตัดการเชื่อมต่อจาก SmartThings เนื่องจากข้อมูลการเข้าถึงถูกเปลี่ยนแปลงหรือหายไป กรุณาไปที่ Ecobee (การเชื่อมต่อ) SmartApp และใส่ข้อมูลยืนยันตัวตนการเข้าสู่บัญชีผู้ใช้ของคุณอีกครั้ง
-'''Your Ecobee thermostat'''.th=ตัวควบคุมอุณหภูมิ Ecobee ของคุณ

smartapps/smartthings/ecobee-connect.src/i18n/tr.properties

@@ -1,17 +0,0 @@
-'''Connect your Ecobee thermostat to SmartThings.'''.tr=Ecobee termostatınızı SmartThings'e bağlayın.
-'''You are connected.'''.tr=Bağlantı kurdunuz.
-'''Click to enter Ecobee Credentials'''.tr=Ecobee Kimlik Bilgilerinizi girmek için tıklayın
-'''Login'''.tr=Oturum aç
-'''Tap below to log in to the ecobee service and authorize SmartThings access. Be sure to scroll down on page 2 and press the 'Allow' button.'''.tr=Ecobee servisinde oturum açmak ve SmartThings erişimine izin vermek için aşağıya dokunun. Ekranı 2. sayfaya kaydırdığınızdan emin olun ve 'İzin Ver' tuşuna basın.
-'''Select Your Thermostats'''.tr=Termostatlarınızı Seçin
-'''Tap below to see the list of ecobee thermostats available in your ecobee account and select the ones you want to connect to SmartThings.'''.tr=Ecobee hesabınızda mevcut olan ecobee termostatlarının listesini görüntülemek için aşağıya dokunun ve SmartThings'e bağlamak istediklerinizi seçin.
-'''Tap to choose'''.tr=Seçmek için dokunun
-'''Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings.'''.tr=Ecobee hesabınızda mevcut olan ecobee sensörlerinin listesini görüntülemek için aşağıya dokunun ve SmartThings'e bağlamak istediklerinizi seçin.
-'''Select Ecobee Sensors ({{numFound}} found)'''.tr=Ecobee Sensörlerini seçin ({{numFound}} bulundu)
-'''Your ecobee Account is now connected to SmartThings!'''.tr=Ecobee Hesabınız artık SmartThings'e bağlandı!
-'''Click 'Done' to finish setup.'''.tr=Kurulumu bitirmek için 'Bitti' öğesine tıklayın.
-'''The connection could not be established!'''.tr=Bağlantı kurulamadı!
-'''Click 'Done' to return to the menu.'''.tr=Menüye dönmek için 'Bitti' öğesine tıklayın.
-'''{{deviceName}} is connected to SmartThings'''.tr={{cihazİsmi}} SmartThings'e bağlandı
-'''{{deviceName}} is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials.'''.tr=Ecobee termostatınız
-'''Your Ecobee thermostat'''.tr=Ecobee termostatınız

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -17,14 +17,14 @@
  */
 
 definition(
-		name: "Hue (Connect)",
+	name: "Hue (Connect)",
-		namespace: "smartthings",
+	namespace: "smartthings",
-		author: "SmartThings",
+	author: "SmartThings",
-		description: "Allows you to connect your Philips Hue lights with SmartThings and control them from your Things area or Dashboard in the SmartThings Mobile app. Adjust colors by going to the Thing detail screen for your Hue lights (tap the gear on Hue tiles).\n\nPlease update your Hue Bridge first, outside of the SmartThings app, using the Philips Hue app.",
+	description: "Allows you to connect your Philips Hue lights with SmartThings and control them from your Things area or Dashboard in the SmartThings Mobile app. Adjust colors by going to the Thing detail screen for your Hue lights (tap the gear on Hue tiles).\n\nPlease update your Hue Bridge first, outside of the SmartThings app, using the Philips Hue app.",
-		category: "SmartThings Labs",
+	category: "SmartThings Labs",
-		iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
+	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
-		iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
+	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
-		singleInstance: true
+	singleInstance: true
 )
 
 preferences {
@@ -85,8 +85,7 @@ def bridgeDiscovery(params=[:])
 	}
 
 	return dynamicPage(name:"bridgeDiscovery", title:"Discovery Started!", nextPage:"bridgeBtnPush", refreshInterval:refreshInterval, uninstall: true) {
-		section("Please wait while we discover your Hue Bridge. Kindly note that you must first configure your Hue Bridge and Lights using the Philips Hue application. " +
+		section("Please wait while we discover your Hue Bridge. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-				"Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedHue", "enum", required:false, title:"Select Hue Bridge (${numFound} found)", multiple:false, options:options, submitOnChange: true
 		}
 	}
@@ -173,34 +172,18 @@ def bulbDiscovery() {
 			if (existingLightsDescription.isEmpty()) {
 				existingLightsDescription += it.value
 			} else {
-				existingLightsDescription += ", ${it.value}"
+				 existingLightsDescription += ", ${it.value}"
 			}
 		}
 	}
 
-	if (bulbRefreshCount > 200 && numFound == 0) {
+	return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
-		// Time out after 10 minutes
+		section("Please wait while we discover your Hue Lights. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-		state.inBulbDiscovery = false
+			input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, submitOnChange: true, options:newLights
-		bulbRefreshCount = 0
+			paragraph title: "Previously added Hue Lights (${existingLights.size()} added)", existingLightsDescription
-		return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Failed!", nextPage:"", refreshInterval:0, install:true, uninstall: true) {
-			section("Failed to discover any lights, please try again later. Click Done to exit.") {
-				//input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, submitOnChange: true, options:newLights
-				paragraph title: "Previously added Hue Lights (${existingLights.size()} added)", existingLightsDescription
-			}
-			section {
-				href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
-			}
 		}
-
+		section {
-	} else {
+			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
-		return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
-			section("Please wait while we discover your Hue Lights. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-				input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, submitOnChange: true, options:newLights
-				paragraph title: "Previously added Hue Lights (${existingLights.size()} added)", existingLightsDescription
-			}
-			section {
-				href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
-			}
 		}
 	}
 }
@@ -217,32 +200,32 @@ private sendDeveloperReq() {
 	def token = app.id
 	def host = getBridgeIP()
 	sendHubCommand(new physicalgraph.device.HubAction([
-			method: "POST",
+		method: "POST",
-			path: "/api",
+		path: "/api",
-			headers: [
+		headers: [
-					HOST: host
+			HOST: host
-			],
+		],
-			body: [devicetype: "$token-0"]], "${selectedHue}", [callback: "usernameHandler"]))
+		body: [devicetype: "$token-0"]], "${selectedHue}", [callback: "usernameHandler"]))
 }
 
 private discoverHueBulbs() {
 	def host = getBridgeIP()
 	sendHubCommand(new physicalgraph.device.HubAction([
-			method: "GET",
+		method: "GET",
-			path: "/api/${state.username}/lights",
+		path: "/api/${state.username}/lights",
-			headers: [
+		headers: [
-					HOST: host
+			HOST: host
-			]], "${selectedHue}", [callback: "lightsHandler"]))
+		]], "${selectedHue}", [callback: "lightsHandler"]))
 }
 
 private verifyHueBridge(String deviceNetworkId, String host) {
 	log.trace "Verify Hue Bridge $deviceNetworkId"
 	sendHubCommand(new physicalgraph.device.HubAction([
-			method: "GET",
+		method: "GET",
-			path: "/description.xml",
+		path: "/description.xml",
-			headers: [
+		headers: [
-					HOST: host
+			HOST: host
-			]], deviceNetworkId, [callback: "bridgeDescriptionHandler"]))
+		]], deviceNetworkId, [callback: "bridgeDescriptionHandler"]))
 }
 
 private verifyHueBridges() {
@@ -400,7 +383,7 @@ def addBulbs() {
 					log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
 				}
 			} else {
-				//backwards compatable
+			 	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
 				d?.completedSetup = true
@@ -424,7 +407,7 @@ def addBridge() {
 	if(vbridge) {
 		def d = getChildDevice(selectedHue)
 		if(!d) {
-			// compatibility with old devices
+	 		// compatibility with old devices
 			def newbridge = true
 			childDevices.each {
 				if (it.getDeviceDataByName("mac")) {
@@ -610,7 +593,7 @@ def locationHandler(evt) {
 	log.trace "Location: $description"
 
 	def hub = evt?.hubId
-	def parsedEvent = parseLanMessage(description)
+ 	def parsedEvent = parseLanMessage(description)
 	parsedEvent << ["hub":hub]
 
 	if (parsedEvent?.ssdpTerm?.contains("urn:schemas-upnp-org:device:basic:1")) {
@@ -836,7 +819,8 @@ def parse(childDevice, description) {
 			try {
 				body = new groovy.json.JsonSlurper().parseText(bodyString)
 			} catch (all) {
-				log.warn "Parsing Body failed"
+				log.warn "Parsing Body failed - trying again..."
+				poll()
 			}
 			if (body instanceof java.util.Map) {
 				// get (poll) reponse
@@ -860,7 +844,7 @@ private sendColorEvents(device, xy, hue, sat, ct, colormode = null) {
 
 	def events = [:]
 	// For now, only care about changing color temperature if requested by user
-	if (ct != null && ct != 0 && (colormode == "ct" || (xy == null && hue == null && sat == null))) {
+	if (ct != null && (colormode == "ct" || (xy == null && hue == null && sat == null))) {
 		// for some reason setting Hue to their specified minimum off 153 yields 154, dealt with below
 		// 153 (6500K) to 500 (2000K)
 		def temp = (ct == 154) ? 6500 : Math.round(1000000 / ct)
@@ -1152,7 +1136,7 @@ def setColorTemperature(childDevice, huesettings) {
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000/huesettings)
 	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [ct: ct, on: true])
-	return "Setting color temperature to $ct"
+	return "Setting color temperature to $percent"
 }
 
 def setColor(childDevice, huesettings) {
@@ -1227,7 +1211,7 @@ private poll() {
 	def uri = "/api/${state.username}/lights/"
 	log.debug "GET: $host$uri"
 	sendHubCommand(new physicalgraph.device.HubAction("GET ${uri} HTTP/1.1\r\n" +
-			"HOST: ${host}\r\n\r\n", physicalgraph.device.Protocol.LAN, selectedHue))
+		"HOST: ${host}\r\n\r\n", physicalgraph.device.Protocol.LAN, selectedHue))
 }
 
 private isOnline(id) {
@@ -1244,10 +1228,10 @@ private put(path, body) {
 	log.debug "BODY: ${bodyJSON}"
 
 	sendHubCommand(new physicalgraph.device.HubAction("PUT $uri HTTP/1.1\r\n" +
-			"HOST: ${host}\r\n" +
+		"HOST: ${host}\r\n" +
-			"Content-Length: ${length}\r\n" +
+		"Content-Length: ${length}\r\n" +
-			"\r\n" +
+		"\r\n" +
-			"${bodyJSON}", physicalgraph.device.Protocol.LAN, "${selectedHue}"))
+		"${bodyJSON}", physicalgraph.device.Protocol.LAN, "${selectedHue}"))
 }
 
 /*
@@ -1268,7 +1252,7 @@ private getBridgeIP() {
 		if (d) {
 			if (d.getDeviceDataByName("networkAddress"))
 				host =  d.getDeviceDataByName("networkAddress")
-			else
+		else
 				host = d.latestState('networkAddress').stringValue
 		}
 		if (host == null || host == "") {

smartapps/smartthings/life360-connect.src/life360-connect.groovy

@@ -289,12 +289,12 @@ def initializeLife360Connection() {
        		state.life360AccessToken = result.data.access_token
             return true;
    		}
-		log.info "Life360 initializeLife360Connection, response=${result.data}"
+		log.debug "Response=${result.data}"
         return false;
         
     }
     catch (e) {
-       log.error "Life360 initializeLife360Connection, error: $e"
+       log.debug e
        return false;
     }
 
@@ -656,7 +656,7 @@ def generateInitialEvent (member, childDevice) {
     
     try { // we are going to just ignore any errors
     
-    	log.info "Life360 generateInitialEvent($member, $childDevice)"
+    	log.debug "Generate Initial Event for New Device for Member = ${member.id}"
         
         def place = state.places.find{it.id==settings.place}
         
@@ -677,8 +677,6 @@ def generateInitialEvent (member, childDevice) {
         	// log.debug "Distance Away = ${distanceAway}"
   
   			boolean isPresent = (distanceAway <= placeRadius)
-
-			log.info "Life360 generateInitialEvent, member: ($memberLatitude, $memberLongitude), place: ($placeLatitude, $placeLongitude), radius: $placeRadius, dist: $distanceAway, present: $isPresent"
                 
         	// log.debug "External Id=${app.id}:${member.id}"
         
@@ -720,7 +718,7 @@ def haversine(lat1, lon1, lat2, lon2) {
 
 def placeEventHandler() {
 
-	log.info "Life360 placeEventHandler: params=$params, settings.place=$settings.place"
+	log.debug "In placeEventHandler method."
 
 	// the POST to this end-point will look like:
     // POST http://test.com/webhook?circleId=XXXX&placeId=XXXX&userId=XXXX&direction=arrive
@@ -731,6 +729,8 @@ def placeEventHandler() {
     def direction = params?.direction
     def timestamp = params?.timestamp
     
+    log.debug "Life360 Event: Circle: ${circleId}, Place: ${placeId}, User: ${userId}, Direction: ${direction}"
+
     if (placeId == settings.place) {
 
 		def presenceState = (direction=="in")
@@ -745,10 +745,10 @@ def placeEventHandler() {
 
 		if (deviceWrapper) {
 			deviceWrapper.generatePresenceEvent(presenceState)
-    		log.debug "Life360 event raised on child device: ${externalId}"
+    		log.debug "Event raised on child device: ${externalId}"
 		}
    		else {
-    		log.warn "Life360 couldn't find child device associated with inbound Life360 event."
+    		log.debug "Couldn't find child device associated with inbound Life360 event."
     	}
     }
 

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -346,7 +346,7 @@ def devicesList(selector = '') {
 		if (resp.status == 200) {
 			return resp.data
 		} else {
-			log.debug("No response from device list call. ${resp.status} ${resp.data}")
+			log.error("Non-200 from device list call. ${resp.status} ${resp.data}")
 			return []
 		}
 	}
@@ -418,15 +418,9 @@ def updateDevices() {
 	}
 	getChildDevices().findAll { !selectors.contains("${it.deviceNetworkId}") }.each {
 		log.info("Deleting ${it.deviceNetworkId}")
-		if (state.devices[it.deviceNetworkId])
+		state.devices[it.deviceNetworkId] = null
-			state.devices[it.deviceNetworkId] = null
+		deleteChildDevice(it.deviceNetworkId)
-		// The reason the implementation is trying to delete this bulb is because it is not longer connected to the LIFX location.
-		// Adding "try" will prevent this exception from happening.
-		// Ideally device health would show to the user that the device is not longer accessible so that the user can either force delete it or remove it from the SmartApp.
-		try {
-			deleteChildDevice(it.deviceNetworkId)
-		} catch (Exception e) {
-			log.debug("Can't remove this device because it's being used by an SmartApp")
-		}
 	}
 }
+
+