Modifying 'Publish a SmartApp for OpenT2T - Remove support for multiple subscriptions to a single device.'

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -120,15 +120,6 @@ def configure() {
 	return cmd
 }
 
-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -109,15 +109,6 @@ def configure() {
 	return cmds
 }
 
-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -27,7 +27,7 @@ metadata {
         capability "Switch"
         capability "Refresh"
         capability "Music Player"
-        capability "Health Check"
+        capability "Polling"
 
         /**
          * Define all commands, ie, if you have a custom action not
@@ -236,33 +236,7 @@ def parse(String event) {
  * @return action(s) to take or null
  */
 def installed() {
-    // Notify health check about this device with timeout interval 12 minutes
-    sendEvent(name: "checkInterval", value: 12 * 60, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
-    startPoll()
-}
-
-/**
- * Called by health check if no events been generated in the last 12 minutes
- * If device doesn't respond it will be marked offline (not available)
- */
-def ping() {
-    TRACE("ping")
-    boseSendGetNowPlaying()
-}
-
-/**
- * Schedule a 2 minute poll of the device to refresh the
- * tiles so the user gets the correct information.
- */
-def startPoll() {
-    TRACE("startPoll")
-    unschedule()
-    // Schedule 2 minute polling of speaker status (song average length is 3-4 minutes)
-    def sec = Math.round(Math.floor(Math.random() * 60))
-    //def cron = "$sec 0/5 * * * ?" // every 5 min
-    def cron = "$sec 0/2 * * * ?" // every 2 min
-    log.debug "schedule('$cron', boseSendGetNowPlaying)"
-    schedule(cron, boseSendGetNowPlaying)
+    onAction("refresh")
 }
 
 /**
@@ -342,6 +316,14 @@ def onAction(String user, data=null) {
     return actions
 }
 
+/**
+ * Called every so often (every 5 minutes actually) to refresh the
+ * tiles so the user gets the correct information.
+ */
+def poll() {
+    return boseRefreshNowPlaying()
+}
+
 /**
  * Joins this speaker into the everywhere zone
  */
@@ -855,10 +837,6 @@ def boseRefreshNowPlaying(delay=0) {
     return boseGET("/now_playing")
 }
 
-def boseSendGetNowPlaying() {
-    sendHubCommand(boseGET("/now_playing"))
-}
-
 /**
  * Requests the list of presets
  *
@@ -1036,8 +1014,4 @@ def boseGetDeviceID() {
  */
 def getDeviceIP() {
     return parent.resolveDNI2Address(device.deviceNetworkId)
-}
-
-def TRACE(text) {
-    log.trace "${text}"
 }

devicetypes/smartthings/cooper-rf9500.src/cooper-rf9500.groovy

@@ -183,15 +183,6 @@ def updateState(String name, String value) {
 	device.updateDataValue(name, value)
 }
 
-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 3)
 }

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -22,10 +22,9 @@ metadata {
 		capability "Sensor"
 		capability "Health Check"
 
-		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "GE Plug-In Smart Dimmer "
-		fingerprint mfr:"0063", prod:"4944", model:"3034", deviceJoinName: "GE In-Wall Smart Fan Control"
+		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "Z-Wave Plug-In Dimmer"
 	}
 
 	simulator {

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -125,7 +125,7 @@ metadata {
 void installed() {
     // The device refreshes every 5 minutes by default so if we miss 2 refreshes we can consider it offline
     // Using 12 minutes because in testing, device health team found that there could be "jitter"
-    sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "cloud"], displayed: false)
+    sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "cloud", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // Device Watch will ping the device to proactively determine if the device has gone offline

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -99,7 +99,7 @@ def parse(String description) {
 
 def poll() {
     def refreshCmds = [
-        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 2000"
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
     ]
 
     return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh()
@@ -197,7 +197,7 @@ def off() {
 
 def refresh() {
     def refreshCmds = [
-        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 2000"
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
     ]
 
     return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig()

devicetypes/smartthings/life360-user.src/life360-user.groovy

@@ -39,7 +39,7 @@ metadata {
 }
 
 def generatePresenceEvent(boolean present) {
-	log.info "Life360 generatePresenceEvent($present)"
+	log.debug "Here in generatePresenceEvent!"
 	def value = formatValue(present)
 	def linkText = getLinkText(device)
 	def descriptionText = formatDescriptionText(linkText, present)

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -71,7 +71,7 @@ def parse(String description) {
 
 	def event = [:]
 	def finalResult = isKnownDescription(description)
-	if (finalResult) {
+	if (finalResult != "false") {
 		log.info finalResult
 		if (finalResult.type == "update") {
 			log.info "$device updates: ${finalResult.value}"
@@ -128,9 +128,9 @@ def setLevel(value) {
 
 def refresh() {
 	[
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 2000",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 2000",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0B04 0x050B", "delay 2000"
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0B04 0x050B", "delay 500"
 	]
 
 }
@@ -212,16 +212,13 @@ def isKnownDescription(description) {
 		else if (descMap.cluster == "0B04" || descMap.clusterId == "0B04"){
 			isDescriptionPower(descMap)
 		}
-		else {
-			return [:]
-		}
 	}
 	else if(description?.startsWith("on/off:")) {
 		def switchValue = description?.endsWith("1") ? "on" : "off"
 		return	[type: "switch", value : switchValue]
 	}
 	else {
-		return [:]
+		return "false"
 	}
 }
 
@@ -255,7 +252,7 @@ def isDescriptionOnOff(descMap) {
 		return	[type: "switch", value : switchValue]
 	}
 	else {
-		return [:]
+		return "false"
 	}
 
 }
@@ -282,9 +279,10 @@ def isDescriptionLevel(descMap) {
 
 	if (dimmerValue != -1){
 		return	[type: "level", value : dimmerValue]
+
 	}
 	else {
-		return [:]
+		return "false"
 	}
 }
 
@@ -306,16 +304,16 @@ def isDescriptionPower(descMap) {
 		return	[type: "power", value : powerValue]
 	}
 	else {
-		return [:]
+		return "false"
 	}
 }
 
 
 def onOffConfig() {
 	[
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 2000",
-			"zcl global send-me-a-report 6 0 0x10 0 600 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 6 0 0x10 0 600 {01}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
 	]
 }
 
@@ -323,9 +321,9 @@ def onOffConfig() {
 //min level change is 01
 def levelConfig() {
 	[
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 8 {${device.zigbeeId}} {}", "delay 2000",
-			"zcl global send-me-a-report 8 0 0x20 5 3600 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 8 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 8 0 0x20 5 3600 {01}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
 	]
 }
 
@@ -333,10 +331,9 @@ def levelConfig() {
 //min change in value is 05
 def powerConfig() {
 	[
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 2000",
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
 		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
-		"delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
 }
 
@@ -345,10 +342,7 @@ def setLevelWithRate(level, rate) {
 		rate = "0000"
 	}
 	level = convertToHexString(level * 255 / 100) 				//Converting the 0-100 range to 0-FF range in hex
-	[
-			"st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {$level $rate}",
-			"delay 2000"
-	]
+	"st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {$level $rate}"
 }
 
 String convertToHexString(value, width=2) {

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -51,7 +51,7 @@ def on() {
 			'zcl on-off on',
 			'delay 200',
 			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 2000'
+			'delay 500'
 
 	]
 
@@ -62,6 +62,6 @@ def off() {
 			'zcl on-off off',
 			'delay 200',
 			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 2000'
+			'delay 500'
 	]
 }

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -157,10 +157,9 @@ def configure() {
 //min change in value is 01
 def powerConfig() {
 	[
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 2000",
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
 		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
-		"delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
 }
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -29,10 +29,9 @@ metadata {
 		command "enrollResponse"
 
 
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-S", deviceJoinName: "Water Leak Sensor"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-L", deviceJoinName: "Iris Smart Water Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}
 
@@ -129,7 +128,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00){
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
@@ -286,8 +285,8 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
 
 	return refreshCmds + enrollResponse()
@@ -309,10 +308,10 @@ def enrollResponse() {
 	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
 

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -132,7 +132,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
@@ -298,8 +298,8 @@ def ping() {
 def refresh() {
 	log.debug "refresh called"
 	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
 
 	return refreshCmds + enrollResponse()
@@ -321,10 +321,10 @@ def enrollResponse() {
 	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
 

devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy

@@ -57,7 +57,6 @@ def parse(String description) {
 
 private Map parseBasicMessage(description) {
 	def name = parseName(description)
-	def results = [:]
 	if (name != null) {
 		def value = parseValue(description)
 		def linkText = getLinkText(device)
@@ -65,7 +64,7 @@ private Map parseBasicMessage(description) {
 		def handlerName = value
 		def isStateChange = isStateChange(device, name, value)
 
-		results = [
+		def results = [
 				name           : name,
 				value          : value,
 				linkText       : linkText,
@@ -74,6 +73,8 @@ private Map parseBasicMessage(description) {
 				isStateChange  : isStateChange,
 				displayed      : displayed(description, isStateChange)
 		]
+	} else {
+		results = [:]
 	}
 	log.debug "Parse returned $results.descriptionText"
 	return results

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -161,7 +161,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if(cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
@@ -339,7 +339,7 @@ private Map getContactResult(value) {
 	log.debug "Contact: ${device.displayName} value = ${value}"
 	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
 	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
-	return [name: 'status', value: value, descriptionText: descriptionText, translatable: true]
+	sendEvent(name: 'status', value: value, descriptionText: descriptionText, translatable: true)
 }
 
 private getAccelerationResult(numValue) {
@@ -428,10 +428,10 @@ def enrollResponse() {
 	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
 		"raw 0x500 {01 23 00 00 00}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -119,7 +119,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07){
 					if (cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
@@ -252,8 +252,8 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
-        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
 
 	return refreshCmds + enrollResponse()
@@ -277,10 +277,10 @@ def enrollResponse() {
 	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
 

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -103,7 +103,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00){
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
@@ -270,9 +270,9 @@ def configure() {
 
 	log.debug "Configuring Reporting and Bindings."
 	def humidityConfigCmds = [
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 2000",
-		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity

devicetypes/smartthings/testing/simulated-minimote.src/simulated-minimote.groovy

@@ -126,15 +126,6 @@ private hold(button) {
 	sendEvent(name: "button", value: "held", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was held", isStateChange: true)
 }
 
-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/testing/simulated-switch.src/simulated-switch.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-
+	
     definition (name: "Simulated Switch", namespace: "smartthings/testing", author: "bob") {
 		capability "Switch"
         capability "Relay Switch"
@@ -39,7 +39,9 @@ metadata {
 	}
 }
 
-def parse(description) {
+def parse(String description) {
+	def pair = description.split(":")
+	createEvent(name: pair[0].trim(), value: pair[1].trim())
 }
 
 def on() {

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -86,7 +86,7 @@ def parse(String description) {
 	def bodyString = msg.body
 	if (bodyString) {
 		unschedule("setOffline")
-        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))
+		def body = new XmlSlurper().parseText(bodyString)
 
 		if (body?.property?.TimeSyncRequest?.text()) {
 			log.trace "Got TimeSyncRequest"

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -78,7 +78,7 @@ def parse(String description) {
 	def bodyString = msg.body
 	if (bodyString) {
     	unschedule("setOffline")
-        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))
+		def body = new XmlSlurper().parseText(bodyString)
 		if (body?.property?.TimeSyncRequest?.text()) {
 			log.trace "Got TimeSyncRequest"
 			result << timeSyncResponse()

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -84,7 +84,7 @@ def parse(String description) {
     def bodyString = msg.body
     if (bodyString) {
     	unschedule("setOffline")
-        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))
+        def body = new XmlSlurper().parseText(bodyString)
  		if (body?.property?.TimeSyncRequest?.text()) {
         	log.trace "Got TimeSyncRequest"
         	result << timeSyncResponse()
@@ -208,7 +208,7 @@ def subscribe(ip, port) {
     def existingIp = getDataValue("ip")
     def existingPort = getDataValue("port")
     if (ip && ip != existingIp) {
-         log.debug "Updating ip from $existingIp to $ip"
+         log.debug "Updating ip from $existingIp to $ip"    
     	 updateDataValue("ip", ip)
     	 def ipvalue = convertHexToIP(getDataValue("ip"))
          sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
@@ -291,4 +291,4 @@ User-Agent: CyberGarage-HTTP/1.0
 </u:GetBinaryState>
 </s:Body>
 </s:Envelope>""", physicalgraph.device.Protocol.LAN)
-}
+}

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -28,8 +28,8 @@ metadata {
 
         fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
         //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
-        fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
-        fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
+        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
+        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
     }
 
     simulator {}

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -23,15 +23,9 @@ metadata {
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart A19 Soft White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart BR30 Soft White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "E11-G13", deviceJoinName: "Sengled Element Classic"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL6HD", deviceJoinName: "Leviton Dimmer Switch"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL3HL", deviceJoinName: "Leviton Lumina RF Plug-In Dimmer"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL1KD", deviceJoinName: "Leviton Lumina RF Dimmer Switch"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -28,8 +28,8 @@ metadata {
 		capability "Switch Level"
 		capability "Health Check"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
 	}
 
 	// UI tile definitions

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -32,12 +32,11 @@ metadata {
         attribute "colorName", "string"
         command "setGenericName"
 
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "SYLVANIA Smart Flex RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "SYLVANIA Smart A19 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "SYLVANIA Smart BR30 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "SYLVANIA Smart RT5/6 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY FLEX OUTDOOR RGBW", deviceJoinName: "SYLVANIA Smart Outdoor RGBW Flex"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED A19 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "OSRAM LIGHTIFY LED BR30 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "OSRAM LIGHTIFY LED RT 5/6 RGBW"
     }
 
     // UI tile definitions

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -22,7 +22,6 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "000A", manufacturer: "HAI", model: "65A21-1", deviceJoinName: "Leviton Wireless Load Control Module-30amp"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL15A", deviceJoinName: "Leviton Lumina RF Plug-In Appliance Module"
     }
 
     // simulator metadata

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -32,12 +32,11 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04", outClusters: "0019"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "SYLVANIA Smart BR30 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "SYLVANIA Smart RT5/6 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "SYLVANIA Smart A19 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Flood BR30 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY RT5/6 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "Z01-A19NAE26", deviceJoinName: "Sengled Element plus"
     }
 
     // UI tile definitions
@@ -84,24 +83,105 @@ def parse(String description) {
         }
     }
     else {
-        def cluster = zigbee.parse(description)
+        Map bindingTable = parseBindingTableResponse(description)
+        if (bindingTable) {
+            List<String> cmds = []
+            bindingTable.table_entries.inject(cmds) { acc, entry ->
+                // The binding entry is not for our hub and should be deleted
+                if (entry["dstAddr"] != zigbeeEui) {
+                    acc.addAll(removeBinding(entry.clusterId, entry.srcAddr, entry.srcEndpoint, entry.dstAddr, entry.dstEndpoint))
+                }
+                acc
+            }
+            // There are more entries that we haven't examined yet
+            if (bindingTable.numTableEntries > bindingTable.startIndex + bindingTable.numEntriesReturned) {
+                def startPos
+                if (cmds) {
+                    log.warn "Removing binding entries for other devices: $cmds"
+                    // Since we are removing some entries, we should start in the same spot as we just read since values
+                    // will fill in the newly vacated spots
+                    startPos = bindingTable.startIndex
+                } else {
+                    // Since we aren't removing anything we move forward to the next set of table entries
+                    startPos = bindingTable.startIndex + bindingTable.numEntriesReturned
+                }
+                cmds.addAll(requestBindingTable(startPos))
+            }
+            sendHubCommand(cmds.collect { it ->
+                new physicalgraph.device.HubAction(it)
+            }, 2000)
+        } else {
+            def cluster = zigbee.parse(description)
 
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+            if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+                if (cluster.data[0] == 0x00) {
+                    log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
+                    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+                }
+                else {
+                    log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+                }
             }
             else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+                log.warn "DID NOT PARSE MESSAGE for description : $description"
+                log.debug "${cluster}"
             }
         }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
-        }
     }
 }
 
+def parseBindingTableResponse(description) {
+    Map descMap = zigbee.parseDescriptionAsMap(description)
+    if (descMap["clusterInt"] == 0x8033) {
+        def header_field_lengths = ["transactionSeqNo": 1, "status": 1, "numTableEntries": 1, "startIndex": 1, "numEntriesReturned": 1]
+        def field_values = [:]
+        def data = descMap["data"]
+        header_field_lengths.each { k, v ->
+            field_values[k] = Integer.parseInt(data.take(v).join(""), 16);
+            data = data.drop(v);
+        }
+
+        List<Map> table = []
+        if (field_values.numEntriesReturned) {
+            def table_entry_lengths = ["srcAddr": 8, "srcEndpoint": 1, "clusterId": 2, "dstAddrMode": 1]
+            for (def i : 0..(field_values.numEntriesReturned - 1)) {
+                def entryMap = [:]
+                table_entry_lengths.each { k, v ->
+                    def val = data.take(v).reverse().join("")
+                    entryMap[k] = val.length() < 8 ? Integer.parseInt(val, 16) : val
+                    data = data.drop(v)
+                }
+
+                switch (entryMap.dstAddrMode) {
+                    case 0x01:
+                        entryMap["dstAddr"] = data.take(2).reverse().join("")
+                        data = data.drop(2)
+                        break
+                    case 0x03:
+                        entryMap["dstAddr"] = data.take(8).reverse().join("")
+                        data = data.drop(8)
+                        entryMap["dstEndpoint"] = Integer.parseInt(data.take(1).join(""), 16)
+                        data = data.drop(1)
+                        break
+                }
+                table << entryMap
+            }
+        }
+        field_values["table_entries"] = table
+        return field_values
+    }
+    return [:]
+}
+
+def requestBindingTable(startPos=0) {
+    return ["zdo mgmt-bind 0x${zigbee.deviceNetworkId} $startPos"]
+}
+
+def removeBinding(cluster, srcAddr, srcEndpoint, destAddr, destEndpoint) {
+    return ["zdo unbind unicast 0x${zigbee.deviceNetworkId} {${srcAddr}} $srcEndpoint $cluster {${destAddr}} $destEndpoint"]
+}
+
+
 def off() {
     zigbee.off()
 }
@@ -131,8 +211,7 @@ def configure() {
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
     sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
-    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh()
+    refresh() + requestBindingTable(0) + ["delay 2000"]
 }
 
 def setColorTemperature(value) {

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -127,8 +127,8 @@ def configureHealthCheck() {
 
 def configure() {
     log.debug "configure()"
-    configureHealthCheck()
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    configureHealthCheck()
 }
 
 def updated() {

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -27,10 +27,6 @@ metadata {
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 RGBW"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "PAR 16 50 RGBW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY RGBW PAR 16 50"
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenpole RGBW-Lightify", deviceJoinName: "OSRAM LIGHTIFY Gardenpole RGBW"
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Outdoor Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Outdoor Flex RGBW"
     }
 
     // UI tile definitions

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -32,7 +32,6 @@ metadata {
 
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"PAR16 50 TW", deviceJoinName: "OSRAM LIGHTIFY LED PAR16 50 Tunable White"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
     }
 
     // UI tile definitions

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -24,10 +24,6 @@ metadata {
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1B03", model:"0334", deviceJoinName: "Leviton Universal Dimmer"
-		fingerprint mfr:"011A", prod:"0102", model:"0201", deviceJoinName: "Enerwave In-Wall Dimmer"
-		fingerprint mfr:"001D", prod:"1001", model:"0334", deviceJoinName: "Leviton 3-Speed Fan Controller"
-		fingerprint mfr:"001D", prod:"0602", model:"0334", deviceJoinName: "Leviton Magnetic Low Voltage Dimmer"
-		fingerprint mfr:"001D", prod:"0401", model:"0334", deviceJoinName: "Leviton 600W Incandescent Dimmer"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -28,7 +28,6 @@ metadata {
 		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
 		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
 		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
-		fingerprint mfr: "0063", prod: "4953", model: "3133", deviceJoinName: "GE Smart Motion Sensor"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -25,9 +25,6 @@ metadata {
 		fingerprint mfr:"0063", prod:"4F50", model:"3031", deviceJoinName: "GE Plug-in Outdoor Switch"
 		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
 		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
-		fingerprint mfr:"001D", prod:"0301", model:"0334", deviceJoinName: "Leviton 15A Switch"
-		fingerprint mfr:"011A", prod:"0101", model:"0102", deviceJoinName: "Enerwave On/Off Switch"
-		fingerprint mfr:"011A", prod:"0101", model:"0603", deviceJoinName: "Enerwave Duplex Receptacle"
 	}
 
 	// simulator metadata

smartapps/michaelstruck/color-coordinator.src/color-coordinator.groovy

@@ -1,11 +1,10 @@
 /**
  * 	Color Coordinator 
- *  Version 1.1.1 - 11/9/16
+ *  Version 1.1.0 - 11/9/16
  *  By Michael Struck
  *
  *  1.0.0 - Initial release
  *  1.1.0 - Fixed issue where master can be part of slaves. This causes a loop that impacts SmartThings. 
- *  1.1.1 - Fix NPE being thrown for slave/master inputs being empty.
  *
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
@@ -34,17 +33,17 @@ preferences {
 
 def mainPage() {
 	dynamicPage(name: "mainPage", title: "", install: true, uninstall: false) {
-		def masterInList = slaves?.id?.find{it==master?.id}
+		def masterInList = slaves.id.find{it==master.id}
         if (masterInList) {
         	section ("**WARNING**"){
             	paragraph "You have included the Master Light in the Slave Group. This will cause a loop in execution. Please remove this device from the Slave Group.", image: "https://raw.githubusercontent.com/MichaelStruck/SmartThingsPublic/master/img/caution.png"
             }
         }
         section("Master Light") {
-			input "master", "capability.colorControl", title: "Colored Light", required: true
+			input "master", "capability.colorControl", title: "Colored Light"
 		}
 		section("Lights that follow the master settings") {
-			input "slaves", "capability.colorControl", title: "Colored Lights",  multiple: true, required: true, submitOnChange: true
+			input "slaves", "capability.colorControl", title: "Colored Lights",  multiple: true, required: false, submitOnChange: true
 		}
     	section([mobileOnly:true], "Options") {
 			input "randomYes", "bool",title: "When Master Turned On, Randomize Color", defaultValue: false
@@ -82,44 +81,40 @@ def init() {
 }
 //-----------------------------------
 def onOffHandler(evt){
-	if (slaves && master) {
-		if (!slaves?.id.find{it==master?.id}){
-		if (master?.currentValue("switch") == "on"){
-		    if (randomYes) getRandomColorMaster()
-				else slaves?.on()
-		}
-		else {
-		    slaves?.off()  
-		}
-		}
+	if (!slaves.id.find{it==master.id}){
+        if (master.currentValue("switch") == "on"){
+            if (randomYes) getRandomColorMaster()
+			else slaves?.on()
+        }
+        else {
+            slaves?.off()  
+        }
 	}
 }
 
 def colorHandler(evt) {
-	if (slaves && master) {
-		if (!slaves?.id?.find{it==master?.id} && master?.currentValue("switch") == "on"){
-			log.debug "Changing Slave units H,S,L"
-		def dimLevel = master?.currentValue("level")
-		def hueLevel = master?.currentValue("hue")
-		def saturationLevel = master.currentValue("saturation")
-			def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
-		slaves?.setColor(newValue)
-		try {
-			log.debug "Changing Slave color temp"
-			def tempLevel = master?.currentValue("colorTemperature")
-			slaves?.setColorTemperature(tempLevel)
-		}
-			catch (e){
-			log.debug "Color temp for master --"
-		}
-		}
+   	if (!slaves.id.find{it==master.id} && master.currentValue("switch") == "on"){
+		log.debug "Changing Slave units H,S,L"
+    	def dimLevel = master.currentValue("level")
+    	def hueLevel = master.currentValue("hue")
+    	def saturationLevel = master.currentValue("saturation")
+		def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
+    	slaves?.setColor(newValue)
+    	try {
+    		log.debug "Changing Slave color temp"
+        	def tempLevel = master.currentValue("colorTemperature")
+    		slaves?.setColorTemperature(tempLevel)
+    	}
+   		catch (e){
+    		log.debug "Color temp for master --"
+    	}
 	}
 }
 
 def getRandomColorMaster(){
     def hueLevel = Math.floor(Math.random() *1000)
     def saturationLevel = Math.floor(Math.random() * 100)
-    def dimLevel = master?.currentValue("level")
+    def dimLevel = master.currentValue("level")
 	def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
     log.debug hueLevel
     log.debug saturationLevel
@@ -128,14 +123,12 @@ def getRandomColorMaster(){
 }
 
 def tempHandler(evt){
-	if (slaves && master) {
-	    if (!slaves?.id?.find{it==master?.id} && master?.currentValue("switch") == "on"){
-		if (evt.value != "--") {
-		    log.debug "Changing Slave color temp based on Master change"
-		    def tempLevel = master.currentValue("colorTemperature")
-		    slaves?.setColorTemperature(tempLevel)
-		}
-		}
+    if (!slaves.id.find{it==master.id} && master.currentValue("switch") == "on"){
+        if (evt.value != "--") {
+            log.debug "Changing Slave color temp based on Master change"
+            def tempLevel = master.currentValue("colorTemperature")
+            slaves?.setColorTemperature(tempLevel)
+        }
 	}
 }
 
@@ -146,7 +139,7 @@ private def textAppName() {
 }	
 
 private def textVersion() {
-    def text = "Version 1.1.1 (12/13/2016)"
+    def text = "Version 1.1.0 (11/09/2016)"
 }
 
 private def textCopyright() {
@@ -173,4 +166,4 @@ private def textHelp() {
     	"This application will allow you to control the settings of multiple colored lights with one control. " +
         "Simply choose a master control light, and then choose the lights that will follow the settings of the master, "+
         "including on/off conditions, hue, saturation, level and color temperature. Also includes a random color feature."
-}
+}

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -1,3 +1,7 @@
+import javax.crypto.Mac;
+import javax.crypto.spec.SecretKeySpec;
+import java.security.InvalidKeyException;
+
 /**
  *  OpenT2T SmartApp Test
  *
@@ -14,14 +18,14 @@
  *
  */
 definition(
-		name: "OpenT2T SmartApp Test",
-		namespace: "opent2t",
-		author: "OpenT2T",
-		description: "Test app to test end to end SmartThings scenarios via OpenT2T",
-		category: "SmartThings Labs",
-		iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-		iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-		iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+	name: "OpenT2T SmartApp Test",
+	namespace: "opent2t",
+	author: "OpenT2T",
+	description: "Test app to test end to end SmartThings scenarios via OpenT2T",
+	category: "SmartThings Labs",
+	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+	iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
 
 /** --------------------+---------------+-----------------------+------------------------------------
  *  Device Type         | Attribute Name| Commands              | Attribute Values
@@ -39,7 +43,7 @@ definition(
  *  garageDoors         | door          | open, close           | unknown, closed, open, closing, opening
  *  cameras             | image         | take                  | <String>
  *  thermostats         | thermostat    | setHeatingSetpoint,   | temperature, heatingSetpoint, coolingSetpoint,
- * 	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
+ *	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
  *                      |				| off, heat, cool, auto,| thermostatFanMode, thermostatOperatingState
  *                      |				| emergencyHeat,        |
  *                      |				| setThermostatMode,    |
@@ -51,93 +55,105 @@ definition(
 
 //Device Inputs
 preferences {
-	section("Allow <PLACEHOLDER: Your App Name> to control these things...") {
-		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false
-		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
-		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-		input "cameras", "capability.videoCapture", title: "Which Cameras?", multiple: true, required: false
-		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false
-		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false
-		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false
-		input "thermostats", "capability.thermostat", title: "Which Thermostat?", multiple: true, required: false
-		input "waterSensors", "capability.waterSensor", title: "Which Water Leak Sensors?", multiple: true, required: false
+	section("Allow OpenT2T to control these things...") {
+		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false, hideWhenEmpty: true
+		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false, hideWhenEmpty: true
+ 		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false, hideWhenEmpty: true
+		input "cameras", "capability.videoCapture", title: "Which Cameras?",  multiple: true, required: false, hideWhenEmpty: true
+		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false, hideWhenEmpty: true
+		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false, hideWhenEmpty: true
+		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false, hideWhenEmpty: true
+		input "thermostats", "capability.thermostat", title: "Which Thermostat?", multiple: true, required: false, hideWhenEmpty: true
+		input "waterSensors", "capability.waterSensor", title: "Which Water Leak Sensors?", multiple: true, required: false, hideWhenEmpty: true
 	}
 }
 
 def getInputs() {
 	def inputList = []
-	inputList += contactSensors ?: []
-	inputList += garageDoors ?: []
-	inputList += locks ?: []
-	inputList += cameras ?: []
-	inputList += motionSensors ?: []
-	inputList += presenceSensors ?: []
-	inputList += switches ?: []
-	inputList += thermostats ?: []
-	inputList += waterSensors ?: []
-	return inputList
+	inputList += contactSensors?: []
+	inputList += garageDoors?: []
+	inputList += locks?: []
+	inputList += cameras?: []
+	inputList += motionSensors?: []
+	inputList += presenceSensors?: []
+	inputList += switches?: []
+	inputList += thermostats?: []
+	inputList += waterSensors?: []
+    return inputList
 }
 
 //API external Endpoints
 mappings {
-	path("/subscriptionURL/:url") {
-		action:
-		[
-				PUT: "updateEndpointURL"
-		]
-	}
-	path("/connectionId/:connId") {
-		action:
-		[
-				PUT: "updateConnectionId"
-		]
-	}
 	path("/devices") {
-		action:
-		[
-				GET: "getDevices"
+		action: [
+			GET: "getDevices"
 		]
 	}
 	path("/devices/:id") {
-		action:
-		[
-				GET: "getDevice"
+		action: [
+			GET: "getDevice"
 		]
 	}
 	path("/update/:id") {
-		action:
-		[
-				PUT: "updateDevice"
+		action: [
+		  PUT: "updateDevice"
 		]
 	}
-	path("/subscription/:id") {
-		action:
-		[
-				POST  : "registerDeviceChange",
-				DELETE: "unregisterDeviceChange"
+	path("/deviceSubscription") {
+		action: [
+		  POST: "registerDeviceChange",
+		  DELETE: "unregisterDeviceChange"
+		]
+	}
+    path("/locationSubscription") {
+		action: [
+		  POST: "registerDeviceGraph",
+		  DELETE: "unregisterDeviceGraph"
 		]
 	}
 }
 
 def installed() {
-	log.debug "Installed with settings: ${settings}"
+	log.debug "Installing with settings: ${settings}"
 	initialize()
 }
 
 def updated() {
-	log.debug "Updated with settings: ${settings}"
+	log.debug "Updating with settings: ${settings}"
+	
+    //Initialize state variables if didn't exist.
+    if( state.deviceSubscriptionMap == null ){
+		state.deviceSubscriptionMap = [:]
+		log.debug "deviceSubscriptionMap created."
+	}
+    if( state.locationSubscriptionMap == null ){
+		state.locationSubscriptionMap = [:]
+		log.debug "locationSubscriptionMap created."
+	}
+    if(state.verificationKeyMap == null){
+    	state.verificationKeyMap = [:]
+		log.debug "verificationKeyMap created."
+    }
+    
 	unsubscribe()
-	registerSubscriptions()
+	registerAllDeviceSubscriptions()
 }
 
 def initialize() {
-	state.connectionId = ""
-	state.endpointURL = "https://ifs.windows-int.com/v1/cb/81C7E77B-EABC-488A-B2BF-FEC42F0DABD2/notify"
-	registerSubscriptions()
+	log.debug "Initializing with settings: ${settings}"
+	state.deviceSubscriptionMap = [:]
+	log.debug "deviceSubscriptionMap created."
+    state.locationSubscriptionMap = [:]
+	log.debug "locationSubscriptionMap created."
+    state.verificationKeyMap = [:]
+	log.debug "verificationKeyMap created."
+    registerAllDeviceSubscriptions()
 }
 
+/*** Subscription Functions  ***/
+
 //Subscribe events for all devices
-def registerSubscriptions() {
+def registerAllDeviceSubscriptions() {
 	registerChangeHandler(inputs)
 }
 
@@ -145,134 +161,292 @@ def registerSubscriptions() {
 def registerChangeHandler(myList) {
 	myList.each { myDevice ->
 		def theAtts = myDevice.supportedAttributes
-		theAtts.each { att ->
-			subscribe(myDevice, att.name, eventHandler)
-			log.info "Registering ${myDevice.displayName}.${att.name}"
+		theAtts.each {att ->
+			subscribe(myDevice, att.name, deviceEventHandler)
+			log.info "Registering for ${myDevice.displayName}.${att.name}"
 		}
 	}
 }
 
 //Endpoints function: Subscribe to events from a specific device
 def registerDeviceChange() {
-	def myDevice = findDevice(params.id)
+	def subscriptionEndpt = params.subscriptionURL
+	def deviceId = params.deviceId
+   	def myDevice = findDevice(deviceId)
+    
+	if( myDevice == null ){
+		httpError(404, "Cannot find device with device ID ${deviceId}.")
+	}
+    
 	def theAtts = myDevice.supportedAttributes
 	try {
-		theAtts.each { att ->
-			subscribe(myDevice, att.name, eventHandler)
-			log.info "Registering ${myDevice.displayName}.${att.name}"
+		theAtts.each {att ->
+			subscribe(myDevice, att.name, deviceEventHandler)
 		}
-		return ["succeed"]
+        log.info "Subscribing for ${myDevice.displayName}"
+
+        if(subscriptionEndpt != null){
+			if(state.deviceSubscriptionMap[deviceId] == null){
+				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
+				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)){
+				// state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
+                // For now, we will only have one subscription endpoint per device
+				state.deviceSubscriptionMap.remove(deviceId)
+				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
+				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			}
+            
+            if(params.key != null){
+            	state.verificationKeyMap[subscriptionEndpt] = params.key
+				log.info "Added verification key: ${params.key} for ${subscriptionEndpt}"
+            }
+        }
 	} catch (e) {
 		httpError(500, "something went wrong: $e")
 	}
+
+	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
+    log.info "Current verification key map is ${state.verificationKeyMap}"
+	return ["succeed"]
 }
 
 //Endpoints function: Unsubscribe to events from a specific device
 def unregisterDeviceChange() {
-	def myDevice = findDevice(params.id)
+	def subscriptionEndpt = params.subscriptionURL
+	def deviceId = params.deviceId
+	def myDevice = findDevice(deviceId)
+    
+	if( myDevice == null ){
+		httpError(404, "Cannot find device with device ID ${deviceId}.")
+	}
+    
 	try {
-		unsubscribe(myDevice)
-		log.info "Unregistering ${myDevice.displayName}"
-		return ["succeed"]
+		if(subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+			if (state.deviceSubscriptionMap[deviceId]?.contains(subscriptionEndpt)){
+				if(state.deviceSubscriptionMap[deviceId].size() == 1){
+					state.deviceSubscriptionMap.remove(deviceId)
+				} else {
+					state.deviceSubscriptionMap[deviceId].remove(subscriptionEndpt)
+				}
+                state.verificationKeyMap.remove(subscriptionEndpt)
+				log.info "Removed subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			}
+        } else {
+			state.deviceSubscriptionMap.remove(deviceId)
+			log.info "Unsubscriping for ${myDevice.displayName}"
+		}
 	} catch (e) {
 		httpError(500, "something went wrong: $e")
 	}
+
+	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
+    log.info "Current verification key map is ${state.verificationKeyMap}"
+}
+
+//Endpoints function: Subscribe to device additiona/removal updated in a location
+def registerDeviceGraph() {
+	def subscriptionEndpt = params.subscriptionURL
+    
+    if (subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+        subscribe(location, "DeviceCreated", locationEventHandler, [filterEvents: false])
+        subscribe(location, "DeviceUpdated", locationEventHandler, [filterEvents: false])
+        subscribe(location, "DeviceDeleted", locationEventHandler, [filterEvents: false])
+
+    	if(state.locationSubscriptionMap[location.id] == null){
+            state.locationSubscriptionMap.put(location.id, [subscriptionEndpt])
+			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+        }else if (!state.locationSubscriptionMap[location.id].contains(subscriptionEndpt)){
+            state.locationSubscriptionMap[location.id] << subscriptionEndpt
+			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+        }
+        
+        if(params.key != null){
+            state.verificationKeyMap[subscriptionEndpt] = params.key
+			log.info "Added verification key: ${params.key} for ${subscriptionEndpt}"
+        }
+        
+        log.info "Current location subscription map is ${state.locationSubscriptionMap}"
+        log.info "Current verification key map is ${state.verificationKeyMap}"
+        return ["succeed"]
+    } else {
+        httpError(400, "missing input parameter: subscriptionURL")
+    }
+}
+
+//Endpoints function: Unsubscribe to events from a specific device
+def unregisterDeviceGraph() {
+	def subscriptionEndpt = params.subscriptionURL
+    
+	try {
+		if(subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+			if (state.locationSubscriptionMap[location.id]?.contains(subscriptionEndpt)){
+				if(state.locationSubscriptionMap[location.id].size() == 1){
+					state.locationSubscriptionMap.remove(location.id)
+				} else {
+					state.locationSubscriptionMap[location.id].remove(subscriptionEndpt)
+				}
+                state.verificationKeyMap.remove(subscriptionEndpt)
+				log.info "Removed subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+			}
+        }else{
+        	httpError(400, "missing input parameter: subscriptionURL")
+        }
+	} catch (e) {
+		httpError(500, "something went wrong: $e")
+	}
+
+	log.info "Current location subscription map is ${state.locationSubscriptionMap}"
+    log.info "Current verification key map is ${state.verificationKeyMap}"
 }
 
 //When events are triggered, send HTTP post to web socket servers
-def eventHandler(evt) {
-	def evt_device_id = evt.deviceId
-	def evt_device_value = evt.value
-	def evt_name = evt.name
-	def evt_device = evt.device
-	def evt_deviceType = getDeviceType(evt_device);
-	def params = [
-			uri : "${state.endpointURL}/${state.connectionId}",
-			body: [
-					name        : evt_device.displayName,
-					id          : evt_device.id,
-					deviceType  : evt_deviceType,
-					manufacturer: evt_device.getManufacturerName(),
-					model       : evt_device.getModelName(),
-					attributes  : deviceAttributeList(evt_device)
-			]
-	]
-	try {
+def deviceEventHandler(evt) {
+	def evtDevice = evt.device
+	def evtDeviceType = getDeviceType(evtDevice)
+	def deviceData = [];
+   	
+    if(evt.data != null){
+		def evtData = parseJson(evt.data)
+		log.info "Received event for ${evtDevice.displayName}, data: ${evtData},  description: ${evt.descriptionText}"
+	}
+    
+    if(evtDeviceType == "thermostat") {
+		deviceData = [name: evtDevice.displayName, id: evtDevice.id, status:evtDevice.status, deviceType:evtDeviceType, manufacturer:evtDevice.manufacturerName, model:evtDevice.modelName, attributes: deviceAttributeList(evtDevice, evtDeviceType), locationMode: getLocationModeInfo(), locationId: location.id ]
+	} else {
+		deviceData = [name: evtDevice.displayName, id: evtDevice.id, status:evtDevice.status, deviceType:evtDeviceType, manufacturer:evtDevice.manufacturerName, model:evtDevice.modelName, attributes: deviceAttributeList(evtDevice, evtDeviceType), locationId: location.id ]
+	}
+    
+    def params = [ body: deviceData ]
+    
+	//send event to all subscriptions urls
+	log.debug "Current subscription urls for ${evtDevice.displayName} is ${state.deviceSubscriptionMap[evtDevice.id]}"
+	state.deviceSubscriptionMap[evtDevice.id].each {
+		params.uri = "${it}"
+        if(state.verificationKeyMap[it] != null ){
+        	def key = state.verificationKeyMap[it]
+            params.header = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
+        }
 		log.trace "POST URI: ${params.uri}"
+        log.trace "Header: ${params.header}"
 		log.trace "Payload: ${params.body}"
-		httpPostJson(params) { resp ->
-			resp.headers.each {
-				log.debug "${it.name} : ${it.value}"
+		try{
+			httpPostJson(params) { resp ->
+				log.trace "response status code: ${resp.status}"
+				log.trace "response data: ${resp.data}"
 			}
-			log.trace "response status code: ${resp.status}"
-			log.trace "response data: ${resp.data}"
+		} catch (e) {
+			log.error "something went wrong: $e"
 		}
-	} catch (e) {
-		log.debug "something went wrong: $e"
 	}
 }
 
-//Endpoints function: update subcription endpoint url [state.endpoint]
-void updateEndpointURL() {
-	state.endpointURL = params.url
-	log.info "Updated EndpointURL to ${state.endpointURL}"
+def locationEventHandler(evt) {
+	log.info "Received event for location ${location.name}/${location.id}, Event: ${evt.name}, description: ${evt.descriptionText}, apiServerUrl: ${apiServerUrl("")}"
+    switch(evt.name){
+    	case "DeviceCreated":
+        case "DeviceDeleted":
+        	def evtDevice = evt.device
+            def evtDeviceType = getDeviceType(evtDevice)
+            def params = [ body: [ eventType:evt.name, deviceId: evtDevice.id, locationId: location.id ] ]
+            
+            if (evt.name == "DeviceDeleted" && state.deviceSubscriptionMap[deviceId] != null){
+            	state.deviceSubscriptionMap.remove(evtDevice.id)
+            }
+        
+            state.locationSubscriptionMap[location.id].each {
+                params.uri = "${it}"
+                if(state.verificationKeyMap[it] != null ){
+                    def key = state.verificationKeyMap[it]
+                    params.header = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
+                }
+                log.trace "POST URI: ${params.uri}"
+				log.trace "Header: ${params.header}"
+                log.trace "Payload: ${params.body}"
+                try{
+                    httpPostJson(params) { resp ->
+                        log.trace "response status code: ${resp.status}"
+                        log.trace "response data: ${resp.data}"
+                    }
+                } catch (e) {
+                    log.error "something went wrong: $e"
+                }
+            }
+    	case "DeviceUpdated":
+        default:
+        break
+    }
 }
 
-//Endpoints function: update global variable [state.connectionId]
-void updateConnectionId() {
-	def connId = params.connId
-	state.connectionId = connId
-	log.info "Updated ConnectionID to ${state.connectionId}"
+private ComputHMACValue(key, data){
+	try {
+        SecretKeySpec secretKeySpec = new SecretKeySpec(key.getBytes("UTF-8"), "HmacSHA1")
+		Mac mac = Mac.getInstance("HmacSHA1")
+		mac.init(secretKeySpec)
+		byte[] digest = mac.doFinal(data.getBytes("UTF-8"))
+		return byteArrayToString(digest)
+	} catch (InvalidKeyException e) {  
+     	log.error "Invalid key exception while converting to HMac SHA1"
+	}
 }
 
+private def byteArrayToString(byte[] data) {
+	BigInteger bigInteger = new BigInteger(1, data)
+    String hash = bigInteger.toString(16)
+	return hash
+}
+
+/*** Device Query/Update Functions  ***/
+
 //Endpoints function: return all device data in json format
 def getDevices() {
-	def deviceData = []
+	def deviceData = [] 
 	inputs?.each {
 		def deviceType = getDeviceType(it)
-		if (deviceType == "thermostat") {
-			deviceData << [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
+		if(deviceType == "thermostat") {
+			deviceData << [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType), locationMode: getLocationModeInfo()]
 		} else {
-			deviceData << [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it)]
-		}
+			deviceData << [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType)]
+		} 
 	}
-
+ 
 	log.debug "getDevices, return: ${deviceData}"
 	return deviceData
 }
 
 //Endpoints function: get device data
-def getDevice() {
+def getDevice() {	
 	def it = findDevice(params.id)
 	def deviceType = getDeviceType(it)
 	def device
-	if (deviceType == "thermostat") {
-		device = [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
+	if(deviceType == "thermostat") {
+		device = [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it,deviceType), locationMode: getLocationModeInfo()]
 	} else {
-		device = [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it)]
+		device = [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType)]
 	}
+
 	log.debug "getDevice, return: ${device}"
 	return device
 }
 
 //Endpoints function: update device data
-void updateDevice() {
+void updateDevice() {	
 	def device = findDevice(params.id)
-	request.JSON.each {
+	request.JSON.each {   
 		def command = it.key
 		def value = it.value
-		if (command) {
+		if (command){
 			def commandList = mapDeviceCommands(command, value)
 			command = commandList[0]
 			value = commandList[1]
-
+			
 			if (command == "setAwayMode") {
 				log.info "Setting away mode to ${value}"
-				if (location.modes?.find { it.name == value }) {
+				if (location.modes?.find {it.name == value}) {
 					location.setMode(value)
 				}
-			} else if (command == "thermostatSetpoint") {
-				switch (device.currentThermostatMode) {
+			}else if (command == "thermostatSetpoint"){
+				switch(device.currentThermostatMode){
 					case "cool":
 						log.info "Update: ${device.displayName}, [${command}, ${value}]"
 						device.setCoolingSetpoint(value)
@@ -286,7 +460,7 @@ void updateDevice() {
 						httpError(501, "this mode: ${device.currentThermostatMode} does not allow changing thermostat setpoint.")
 						break
 				}
-			} else if (!device) {
+			}else if (!device) {
 				log.error "updateDevice, Device not found"
 				httpError(404, "Device not found")
 			} else if (!device.hasCommand(command)) {
@@ -296,11 +470,11 @@ void updateDevice() {
 				if (command == "setColor") {
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(hex: value)
-				} else if (value.isNumber()) {
+				} else if(value.isNumber()) {
 					def intValue = value as Integer
 					log.info "Update: ${device.displayName}, [${command}, ${intValue}(int)]"
 					device."$command"(intValue)
-				} else if (value) {
+				} else if (value){
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(value)
 				} else {
@@ -322,41 +496,49 @@ private getLocationModeInfo() {
 //Map each device to a type given it's capabilities
 private getDeviceType(device) {
 	def deviceType
-	def caps = device.capabilities
-	log.debug "capabilities: [${device}, ${caps}]"
+	def capabilities = device.capabilities
+	log.debug "capabilities: [${device}, ${capabilities}]"
 	log.debug "supported commands: [${device}, ${device.supportedCommands}]"
-	caps.each {
-		switch (it.name.toLowerCase()) {
+    
+	//Loop through the device capability list to determine the device type.
+	capabilities.each {capability ->
+		switch(capability.name.toLowerCase())
+		{
 			case "switch":
 				deviceType = "switch"
-				break
-			case "switch level":
-				deviceType = "light"
-				break
-			case "contact sensor":
-				deviceType = "contactSensor"
+
+				//If the device also contains "Switch Level" capability, identify it as a "light" device.
+				if (capabilities.any{it.name.toLowerCase() == "switch level"}){
+                	
+                    //If the device also contains "Power Meter" capability, identify it as a "dimmerSwitch" device.
+                    if (capabilities.any{it.name.toLowerCase() == "power meter"}){
+                        deviceType = "dimmerSwitch"
+                        return deviceType
+                    } else {
+                        deviceType = "light"
+                        return deviceType
+                    }
+                }
 				break
 			case "garageDoorControl":
 				deviceType = "garageDoor"
-				break
+				return deviceType
 			case "lock":
 				deviceType = "lock"
-				break
+				return deviceType
 			case "video camera":
 				deviceType = "camera"
-				break
-			case "motion sensor":
-				deviceType = "motionSensor"
-				break
-			case "presence sensor":
-				deviceType = "presenceSensor"
-				break
+				return deviceType
 			case "thermostat":
 				deviceType = "thermostat"
-				break
+				return deviceType    
+			case "acceleration sensor":
+			case "contact sensor":
+			case "motion sensor":
+			case "presence sensor":
 			case "water sensor":
-				deviceType = "waterSensor"
-				break
+				deviceType = "genericSensor"
+				return deviceType
 			default:
 				break
 		}
@@ -368,19 +550,38 @@ private getDeviceType(device) {
 private findDevice(deviceId) {
 	return inputs?.find { it.id == deviceId }
 }
-
+ 
 //Return a list of device attributes
-private deviceAttributeList(device) {
-	device.supportedAttributes.collectEntries { attribute ->
-		try {
-			[(attribute.name): device.currentValue(attribute.name)]
-		} catch (e) {
-			[(attribute.name): null]
+private deviceAttributeList(device, deviceType) {
+	def attributeList = [:]
+	def allAttributes = device.supportedAttributes
+	allAttributes.each { attribute ->
+        	try {
+			def currentState = device.currentState(attribute.name)
+            		if(currentState != null ){
+                		switch(attribute.name){
+                    		case 'temperature':
+                        		attributeList.putAll([ (attribute.name): currentState.value, 'temperatureScale':location.temperatureScale ])
+                        		break;
+	                    	default:
+        	                	attributeList.putAll([(attribute.name): currentState.value ])
+                	        	break;
+                		}
+                		if( deviceType == "genericSensor" ){
+                    			def key = attribute.name + "_lastUpdated"
+                			attributeList.putAll([ (key): currentState.isoDate ])
+                		}
+	            	} else {
+            			attributeList.putAll([ (attribute.name): null ]);
+            		}
+		} catch(e) {
+			attributeList.putAll([ (attribute.name): null ]);
 		}
 	}
+    return attributeList
 }
 
-//Map device command and value.
+//Map device command and value. 
 //input command and value are from UWP,
 //returns resultCommand and resultValue that corresponds with function and value in SmartApps
 private mapDeviceCommands(command, value) {
@@ -397,7 +598,7 @@ private mapDeviceCommands(command, value) {
 				resultValue = ""
 			}
 			break
-	// light attributes
+		// light attributes
 		case "level":
 			resultCommand = "setLevel"
 			resultValue = value
@@ -410,14 +611,14 @@ private mapDeviceCommands(command, value) {
 			resultCommand = "setSaturation"
 			resultValue = value
 			break
-		case "ct":
+		case "colorTemperature":
 			resultCommand = "setColorTemperature"
 			resultValue = value
 			break
-		case "color":
+		case "color":	
 			resultCommand = "setColor"
 			resultValue = value
-	// thermostat attributes
+		// thermostat attributes
 		case "hvacMode":
 			resultCommand = "setThermostatMode"
 			resultValue = value
@@ -434,7 +635,7 @@ private mapDeviceCommands(command, value) {
 			resultCommand = "setCoolingSetpoint"
 			resultValue = value
 			break
-		case "heatingSetpoint":
+		case "heatingSetpoint":	
 			resultCommand = "setHeatingSetpoint"
 			resultValue = value
 			break
@@ -442,20 +643,20 @@ private mapDeviceCommands(command, value) {
 			resultCommand = "thermostatSetpoint"
 			resultValue = value
 			break
-	// lock attributes
+		// lock attributes
 		case "locked":
 			if (value == 1 || value == "1" || value == "lock") {
 				resultCommand = "lock"
 				resultValue = ""
-			} else if (value == 0 || value == "0" || value == "unlock") {
+			}
+			else if (value == 0 || value == "0" || value == "unlock") {
 				resultCommand = "unlock"
 				resultValue = ""
 			}
 			break
 		default:
 			break
-	}
-
-	return [resultCommand, resultValue]
-}
-
+	 }
+	 
+	 return [resultCommand,resultValue]
+}

smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy

@@ -19,9 +19,9 @@
     author: "SmartThings",
     description: "Control your Bose SoundTouch speakers",
     category: "SmartThings Labs",
-    iconUrl: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon.png",
-    iconX2Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x.png",
-    iconX3Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x-1.png",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
     singleInstance: true
 )
 
@@ -104,7 +104,7 @@ def deviceDiscovery()
 
         return dynamicPage(name:"deviceDiscovery", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
             section("Please wait while we discover your ${getDeviceName()}. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices, submitOnChange: true
+                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices
             }
         }
     }
@@ -196,8 +196,6 @@ def addDevice(){
             d = addChildDevice(getNameSpace(), getDeviceName(), dni, newDevice?.value.hub, [label:"${deviceName}"])
             d.boseSetDeviceID(newDevice.value.deviceID)
             log.trace "Created ${d.displayName} with id $dni"
-            // sync DTH with device, done here as it currently don't work from the DTH's installed() method
-            d.refresh()
         } else {
             log.trace "${d.displayName} with id $dni already exists"
         }

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -172,34 +172,18 @@ def bulbDiscovery() {
 			if (existingLightsDescription.isEmpty()) {
 				existingLightsDescription += it.value
 			} else {
-				existingLightsDescription += ", ${it.value}"
+				 existingLightsDescription += ", ${it.value}"
 			}
 		}
 	}
 
-	if (bulbRefreshCount > 200 && numFound == 0) {
-		// Time out to avoid endless discovery
-		state.inBulbDiscovery = false
-		bulbRefreshCount = 0
-		return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Failed!", nextPage:"", refreshInterval:0, install:true, uninstall: true) {
-			section("Failed to discover any lights, please try again later. Click Done to exit.") {
-				//input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, submitOnChange: true, options:newLights
-				paragraph title: "Previously added Hue Lights (${existingLights.size()} added)", existingLightsDescription
-			}
-			section {
-				href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
-			}
+	return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
+		section("Please wait while we discover your Hue Lights. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
+			input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, submitOnChange: true, options:newLights
+			paragraph title: "Previously added Hue Lights (${existingLights.size()} added)", existingLightsDescription
 		}
-
-	} else {
-		return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
-			section("Please wait while we discover your Hue Lights. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-				input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, submitOnChange: true, options:newLights
-				paragraph title: "Previously added Hue Lights (${existingLights.size()} added)", existingLightsDescription
-			}
-			section {
-				href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
-			}
+		section {
+			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
 		}
 	}
 }
@@ -423,7 +407,7 @@ def addBridge() {
 	if(vbridge) {
 		def d = getChildDevice(selectedHue)
 		if(!d) {
-			// compatibility with old devices
+	 		// compatibility with old devices
 			def newbridge = true
 			childDevices.each {
 				if (it.getDeviceDataByName("mac")) {
@@ -609,7 +593,7 @@ def locationHandler(evt) {
 	log.trace "Location: $description"
 
 	def hub = evt?.hubId
-	def parsedEvent = parseLanMessage(description)
+ 	def parsedEvent = parseLanMessage(description)
 	parsedEvent << ["hub":hub]
 
 	if (parsedEvent?.ssdpTerm?.contains("urn:schemas-upnp-org:device:basic:1")) {
@@ -835,7 +819,8 @@ def parse(childDevice, description) {
 			try {
 				body = new groovy.json.JsonSlurper().parseText(bodyString)
 			} catch (all) {
-				log.warn "Parsing Body failed"
+				log.warn "Parsing Body failed - trying again..."
+				poll()
 			}
 			if (body instanceof java.util.Map) {
 				// get (poll) reponse
@@ -859,7 +844,7 @@ private sendColorEvents(device, xy, hue, sat, ct, colormode = null) {
 
 	def events = [:]
 	// For now, only care about changing color temperature if requested by user
-	if (ct != null && ct != 0 && (colormode == "ct" || (xy == null && hue == null && sat == null))) {
+	if (ct != null && (colormode == "ct" || (xy == null && hue == null && sat == null))) {
 		// for some reason setting Hue to their specified minimum off 153 yields 154, dealt with below
 		// 153 (6500K) to 500 (2000K)
 		def temp = (ct == 154) ? 6500 : Math.round(1000000 / ct)
@@ -1267,7 +1252,7 @@ private getBridgeIP() {
 		if (d) {
 			if (d.getDeviceDataByName("networkAddress"))
 				host =  d.getDeviceDataByName("networkAddress")
-			else
+		else
 				host = d.latestState('networkAddress').stringValue
 		}
 		if (host == null || host == "") {

smartapps/smartthings/life360-connect.src/life360-connect.groovy

@@ -289,12 +289,12 @@ def initializeLife360Connection() {
        		state.life360AccessToken = result.data.access_token
             return true;
    		}
-		log.info "Life360 initializeLife360Connection, response=${result.data}"
+		log.debug "Response=${result.data}"
         return false;
         
     }
     catch (e) {
-       log.error "Life360 initializeLife360Connection, error: $e"
+       log.debug e
        return false;
     }
 
@@ -656,7 +656,7 @@ def generateInitialEvent (member, childDevice) {
     
     try { // we are going to just ignore any errors
     
-    	log.info "Life360 generateInitialEvent($member, $childDevice)"
+    	log.debug "Generate Initial Event for New Device for Member = ${member.id}"
         
         def place = state.places.find{it.id==settings.place}
         
@@ -677,8 +677,6 @@ def generateInitialEvent (member, childDevice) {
         	// log.debug "Distance Away = ${distanceAway}"
   
   			boolean isPresent = (distanceAway <= placeRadius)
-
-			log.info "Life360 generateInitialEvent, member: ($memberLatitude, $memberLongitude), place: ($placeLatitude, $placeLongitude), radius: $placeRadius, dist: $distanceAway, present: $isPresent"
                 
         	// log.debug "External Id=${app.id}:${member.id}"
         
@@ -720,7 +718,7 @@ def haversine(lat1, lon1, lat2, lon2) {
 
 def placeEventHandler() {
 
-	log.info "Life360 placeEventHandler: params=$params, settings.place=$settings.place"
+	log.debug "In placeEventHandler method."
 
 	// the POST to this end-point will look like:
     // POST http://test.com/webhook?circleId=XXXX&placeId=XXXX&userId=XXXX&direction=arrive
@@ -731,6 +729,8 @@ def placeEventHandler() {
     def direction = params?.direction
     def timestamp = params?.timestamp
     
+    log.debug "Life360 Event: Circle: ${circleId}, Place: ${placeId}, User: ${userId}, Direction: ${direction}"
+
     if (placeId == settings.place) {
 
 		def presenceState = (direction=="in")
@@ -745,10 +745,10 @@ def placeEventHandler() {
 
 		if (deviceWrapper) {
 			deviceWrapper.generatePresenceEvent(presenceState)
-    		log.debug "Life360 event raised on child device: ${externalId}"
+    		log.debug "Event raised on child device: ${externalId}"
 		}
    		else {
-    		log.warn "Life360 couldn't find child device associated with inbound Life360 event."
+    		log.debug "Couldn't find child device associated with inbound Life360 event."
     	}
     }