MSA-1661: null

devicetypes/ps/generic-camera-device.src/generic-camera-device.groovy

@@ -0,0 +1,206 @@
+/**
+ *  Generic Camera Device v1.0.07102014
+ *
+ *  Copyright 2014 patrick@patrickstuart.com
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Generic Camera Device", namespace: "ps", author: "patrick@patrickstuart.com") {
+		capability "Image Capture"
+		capability "Sensor"
+		capability "Actuator"
+        
+		attribute "hubactionMode", "string"
+        
+	}
+
+    preferences {
+    input("CameraIP", "string", title:"Camera IP Address", description: "Please enter your camera's IP Address", required: true, displayDuringSetup: true)
+    input("CameraPort", "string", title:"Camera Port", description: "Please enter your camera's Port", defaultValue: 80 , required: true, displayDuringSetup: true)
+    input("CameraPath", "string", title:"Camera Path to Image", description: "Please enter the path to the image", defaultValue: "/SnapshotJPEG?Resolution=640x480&Quality=Clarity", required: true, displayDuringSetup: true)
+    input("CameraAuth", "bool", title:"Does Camera require User Auth?", description: "Please choose if the camera requires authentication (only basic is supported)", defaultValue: true, displayDuringSetup: true)
+    input("CameraPostGet", "string", title:"Does Camera use a Post or Get, normally Get?", description: "Please choose if the camera uses a POST or a GET command to retreive the image", defaultValue: "GET", displayDuringSetup: true)
+    input("CameraUser", "string", title:"Camera User", description: "Please enter your camera's username", required: false, displayDuringSetup: true)
+    input("CameraPassword", "string", title:"Camera Password", description: "Please enter your camera's password", required: false, displayDuringSetup: true)
+	}
+    
+	simulator {
+    
+	}
+/*
+	tiles {
+		standardTile("camera", "device.image", width: 1, height: 1, canChangeIcon: false, inactiveLabel: true, canChangeBackground: true) {
+			state "default", label: "", action: "", icon: "st.camera.dropcam-centered", backgroundColor: "#FFFFFF"
+		}
+		carouselTile("cameraDetails", "device.image", width: 3, height: 2) { }
+		standardTile("take", "device.image", width: 1, height: 1, canChangeIcon: false, inactiveLabel: true, canChangeBackground: false) {
+			state "take", label: "Take", action: "Image Capture.take", icon: "st.camera.camera", backgroundColor: "#FFFFFF", nextState:"taking"
+			state "taking", label:'Taking', action: "", icon: "st.camera.take-photo", backgroundColor: "#53a7c0"
+			//state "image", label: "Take", action: "Image Capture.take", icon: "st.camera.camera", backgroundColor: "#FFFFFF", nextState:"taking"
+		}
+	standardTile("blank", "device.image", width: 1, height: 1, canChangeIcon: false, canChangeBackground: false, decoration: "flat") {
+            state "blank", label: "", action: "", icon: "", backgroundColor: "#FFFFFF"
+        }
+		main "camera"
+		details(["cameraDetails", "blank", "take"])
+	}
+    
+    */
+    tiles {
+        standardTile("take", "device.image", width: 1, height: 1, canChangeIcon: false, inactiveLabel: true, canChangeBackground: false) {
+            state "take", label: "Take", action: "Image Capture.take", icon: "st.camera.camera", backgroundColor: "#FFFFFF", nextState:"taking"
+            state "taking", label:'Taking', action: "", icon: "st.camera.take-photo", backgroundColor: "#53a7c0"
+            state "image", label: "Take", action: "Image Capture.take", icon: "st.camera.camera", backgroundColor: "#FFFFFF", nextState:"taking"
+        }
+
+        standardTile("refresh", "device.alarmStatus", inactiveLabel: false, decoration: "flat") {
+            state "refresh", action:"polling.poll", icon:"st.secondary.refresh"
+        }
+        standardTile("blank", "device.image", width: 1, height: 1, canChangeIcon: false, canChangeBackground: false, decoration: "flat") {
+            state "blank", label: "", action: "", icon: "", backgroundColor: "#FFFFFF"
+        }
+        carouselTile("cameraDetails", "device.image", width: 3, height: 2) { }
+        main "take"
+        details([ "take", "blank", "refresh", "cameraDetails"])
+    }
+}
+
+def parse(String description) {
+    log.debug "Parsing '${description}'"
+    def map = [:]
+	def retResult = []
+	def descMap = parseDescriptionAsMap(description)
+	//Image
+	if (descMap["bucket"] && descMap["key"]) {
+		putImageInS3(descMap)
+	} 
+}
+
+// handle commands
+def take() {
+	def userpassascii = "${CameraUser}:${CameraPassword}"
+	def userpass = "Basic " + userpassascii.encodeAsBase64().toString()
+    def host = CameraIP 
+    def hosthex = convertIPtoHex(host)
+    def porthex = convertPortToHex(CameraPort)
+    device.deviceNetworkId = "$hosthex:$porthex" 
+    
+    log.debug "The device id configured is: $device.deviceNetworkId"
+    
+    def path = CameraPath 
+    log.debug "path is: $path"
+    log.debug "Requires Auth: $CameraAuth"
+    log.debug "Uses which method: $CameraPostGet"
+    
+    def headers = [:] 
+    headers.put("HOST", "$host:$CameraPort")
+   	if (CameraAuth) {
+        headers.put("Authorization", userpass)
+    }
+    
+    log.debug "The Header is $headers"
+    
+    def method = "GET"
+    try {
+    	if (CameraPostGet.toUpperCase() == "POST") {
+        	method = "POST"
+        	}
+        }
+    catch (Exception e) { // HACK to get around default values not setting in devices
+    	settings.CameraPostGet = "GET"
+        log.debug e
+        log.debug "You must not of set the perference for the CameraPOSTGET option"
+    }
+    
+    log.debug "The method is $method"
+    
+    try {
+    def hubAction = new physicalgraph.device.HubAction(
+    	method: method,
+    	path: path,
+    	headers: headers
+        )
+        	
+    hubAction.options = [outputMsgToS3:true]
+    log.debug hubAction
+    hubAction
+    }
+    catch (Exception e) {
+    	log.debug "Hit Exception $e on $hubAction"
+    }
+    
+}
+def putImageInS3(map) {
+	log.debug "firing s3"
+    def s3ObjectContent
+    try {
+        def imageBytes = getS3Object(map.bucket, map.key + ".jpg")
+        if(imageBytes)
+        {
+            s3ObjectContent = imageBytes.getObjectContent()
+            def bytes = new ByteArrayInputStream(s3ObjectContent.bytes)
+            storeImage(getPictureName(), bytes)
+        }
+    }
+    catch(Exception e) {
+        log.error e
+    }
+	finally {
+    //Explicitly close the stream
+		if (s3ObjectContent) { s3ObjectContent.close() }
+	}
+}
+
+def parseDescriptionAsMap(description) {
+description.split(",").inject([:]) { map, param ->
+def nameAndValue = param.split(":")
+map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+}
+}
+
+private getPictureName() {
+	def pictureUuid = java.util.UUID.randomUUID().toString().replaceAll('-', '')
+    log.debug pictureUuid
+    def picName = device.deviceNetworkId.replaceAll(':', '') + "_$pictureUuid" + ".jpg"
+	return picName
+}
+
+private String convertIPtoHex(ipAddress) { 
+    String hex = ipAddress.tokenize( '.' ).collect {  String.format( '%02x', it.toInteger() ) }.join()
+    log.debug "IP address entered is $ipAddress and the converted hex code is $hex"
+    return hex
+
+}
+
+private String convertPortToHex(port) {
+	String hexport = port.toString().format( '%04x', port.toInteger() )
+    log.debug hexport
+    return hexport
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+
+private String convertHexToIP(hex) {
+	log.debug("Convert hex to ip: $hex") 
+	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+}
+
+private getHostAddress() {
+	def parts = device.deviceNetworkId.split(":")
+    log.debug device.deviceNetworkId
+	def ip = convertHexToIP(parts[0])
+	def port = convertHexToInt(parts[1])
+	return ip + ":" + port
+}

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -22,10 +22,9 @@ metadata {
 		capability "Sensor"
 		capability "Health Check"
 
-		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "GE Plug-In Smart Dimmer "
-		fingerprint mfr:"0063", prod:"4944", model:"3034", deviceJoinName: "GE In-Wall Smart Fan Control"
+		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "Z-Wave Plug-In Dimmer"
 	}
 
 	simulator {

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -99,7 +99,7 @@ def parse(String description) {
 
 def poll() {
     def refreshCmds = [
-        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 2000"
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
     ]
 
     return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh()
@@ -197,7 +197,7 @@ def off() {
 
 def refresh() {
     def refreshCmds = [
-        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 2000"
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
     ]
 
     return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig()

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -128,9 +128,9 @@ def setLevel(value) {
 
 def refresh() {
 	[
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 2000",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 2000",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0B04 0x050B", "delay 2000"
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0B04 0x050B", "delay 500"
 	]
 
 }
@@ -313,9 +313,9 @@ def isDescriptionPower(descMap) {
 
 def onOffConfig() {
 	[
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 2000",
-			"zcl global send-me-a-report 6 0 0x10 0 600 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 6 0 0x10 0 600 {01}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
 	]
 }
 
@@ -323,9 +323,9 @@ def onOffConfig() {
 //min level change is 01
 def levelConfig() {
 	[
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 8 {${device.zigbeeId}} {}", "delay 2000",
-			"zcl global send-me-a-report 8 0 0x20 5 3600 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 8 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 8 0 0x20 5 3600 {01}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
 	]
 }
 
@@ -333,10 +333,9 @@ def levelConfig() {
 //min change in value is 05
 def powerConfig() {
 	[
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 2000",
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
 		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
-		"delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
 }
 
@@ -345,10 +344,7 @@ def setLevelWithRate(level, rate) {
 		rate = "0000"
 	}
 	level = convertToHexString(level * 255 / 100) 				//Converting the 0-100 range to 0-FF range in hex
-	[
-			"st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {$level $rate}",
-			"delay 2000"
-	]
+	"st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {$level $rate}"
 }
 
 String convertToHexString(value, width=2) {

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -51,7 +51,7 @@ def on() {
 			'zcl on-off on',
 			'delay 200',
 			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 2000'
+			'delay 500'
 
 	]
 
@@ -62,6 +62,6 @@ def off() {
 			'zcl on-off off',
 			'delay 200',
 			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 2000'
+			'delay 500'
 	]
 }

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -157,10 +157,9 @@ def configure() {
 //min change in value is 01
 def powerConfig() {
 	[
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 2000",
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
 		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
-		"delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
 }
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -29,10 +29,9 @@ metadata {
 		command "enrollResponse"
 
 
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-S", deviceJoinName: "Water Leak Sensor"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-L", deviceJoinName: "Iris Smart Water Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}
 
@@ -286,8 +285,8 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
 
 	return refreshCmds + enrollResponse()
@@ -309,10 +308,10 @@ def enrollResponse() {
 	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
 

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -298,8 +298,8 @@ def ping() {
 def refresh() {
 	log.debug "refresh called"
 	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
 
 	return refreshCmds + enrollResponse()
@@ -321,10 +321,10 @@ def enrollResponse() {
 	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
 

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -428,10 +428,10 @@ def enrollResponse() {
 	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
 		"raw 0x500 {01 23 00 00 00}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -252,8 +252,8 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
-        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
 
 	return refreshCmds + enrollResponse()
@@ -277,10 +277,10 @@ def enrollResponse() {
 	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
 

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -270,9 +270,9 @@ def configure() {
 
 	log.debug "Configuring Reporting and Bindings."
 	def humidityConfigCmds = [
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 2000",
-		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity

devicetypes/smartthings/testing/simulated-switch.src/simulated-switch.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-
+	
     definition (name: "Simulated Switch", namespace: "smartthings/testing", author: "bob") {
 		capability "Switch"
         capability "Relay Switch"
@@ -39,7 +39,9 @@ metadata {
 	}
 }
 
-def parse(description) {
+def parse(String description) {
+	def pair = description.split(":")
+	createEvent(name: pair[0].trim(), value: pair[1].trim())
 }
 
 def on() {

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -86,7 +86,7 @@ def parse(String description) {
 	def bodyString = msg.body
 	if (bodyString) {
 		unschedule("setOffline")
-        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))
+		def body = new XmlSlurper().parseText(bodyString)
 
 		if (body?.property?.TimeSyncRequest?.text()) {
 			log.trace "Got TimeSyncRequest"

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -78,7 +78,7 @@ def parse(String description) {
 	def bodyString = msg.body
 	if (bodyString) {
     	unschedule("setOffline")
-        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))
+		def body = new XmlSlurper().parseText(bodyString)
 		if (body?.property?.TimeSyncRequest?.text()) {
 			log.trace "Got TimeSyncRequest"
 			result << timeSyncResponse()

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -84,7 +84,7 @@ def parse(String description) {
     def bodyString = msg.body
     if (bodyString) {
     	unschedule("setOffline")
-        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))
+        def body = new XmlSlurper().parseText(bodyString)
  		if (body?.property?.TimeSyncRequest?.text()) {
         	log.trace "Got TimeSyncRequest"
         	result << timeSyncResponse()
@@ -208,7 +208,7 @@ def subscribe(ip, port) {
     def existingIp = getDataValue("ip")
     def existingPort = getDataValue("port")
     if (ip && ip != existingIp) {
-         log.debug "Updating ip from $existingIp to $ip"
+         log.debug "Updating ip from $existingIp to $ip"    
     	 updateDataValue("ip", ip)
     	 def ipvalue = convertHexToIP(getDataValue("ip"))
          sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
@@ -291,4 +291,4 @@ User-Agent: CyberGarage-HTTP/1.0
 </u:GetBinaryState>
 </s:Body>
 </s:Envelope>""", physicalgraph.device.Protocol.LAN)
-}
+}

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -28,8 +28,8 @@ metadata {
 
         fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
         //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
-        fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
-        fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
+        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
+        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
     }
 
     simulator {}

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -28,10 +28,6 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart BR30 Soft White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "E11-G13", deviceJoinName: "Sengled Element Classic"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL6HD", deviceJoinName: "Leviton Dimmer Switch"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL3HL", deviceJoinName: "Leviton Lumina RF Plug-In Dimmer"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL1KD", deviceJoinName: "Leviton Lumina RF Dimmer Switch"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -22,7 +22,6 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "000A", manufacturer: "HAI", model: "65A21-1", deviceJoinName: "Leviton Wireless Load Control Module-30amp"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL15A", deviceJoinName: "Leviton Lumina RF Plug-In Appliance Module"
     }
 
     // simulator metadata

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -24,10 +24,6 @@ metadata {
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1B03", model:"0334", deviceJoinName: "Leviton Universal Dimmer"
-		fingerprint mfr:"011A", prod:"0102", model:"0201", deviceJoinName: "Enerwave In-Wall Dimmer"
-		fingerprint mfr:"001D", prod:"1001", model:"0334", deviceJoinName: "Leviton 3-Speed Fan Controller"
-		fingerprint mfr:"001D", prod:"0602", model:"0334", deviceJoinName: "Leviton Magnetic Low Voltage Dimmer"
-		fingerprint mfr:"001D", prod:"0401", model:"0334", deviceJoinName: "Leviton 600W Incandescent Dimmer"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -28,7 +28,6 @@ metadata {
 		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
 		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
 		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
-		fingerprint mfr: "0063", prod: "4953", model: "3133", deviceJoinName: "GE Smart Motion Sensor"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -25,9 +25,6 @@ metadata {
 		fingerprint mfr:"0063", prod:"4F50", model:"3031", deviceJoinName: "GE Plug-in Outdoor Switch"
 		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
 		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
-		fingerprint mfr:"001D", prod:"0301", model:"0334", deviceJoinName: "Leviton 15A Switch"
-		fingerprint mfr:"011A", prod:"0101", model:"0102", deviceJoinName: "Enerwave On/Off Switch"
-		fingerprint mfr:"011A", prod:"0101", model:"0603", deviceJoinName: "Enerwave Duplex Receptacle"
 	}
 
 	// simulator metadata

smartapps/michaelstruck/color-coordinator.src/color-coordinator.groovy

@@ -1,11 +1,10 @@
 /**
  * 	Color Coordinator 
- *  Version 1.1.1 - 11/9/16
+ *  Version 1.1.0 - 11/9/16
  *  By Michael Struck
  *
  *  1.0.0 - Initial release
  *  1.1.0 - Fixed issue where master can be part of slaves. This causes a loop that impacts SmartThings. 
- *  1.1.1 - Fix NPE being thrown for slave/master inputs being empty.
  *
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
@@ -34,17 +33,17 @@ preferences {
 
 def mainPage() {
 	dynamicPage(name: "mainPage", title: "", install: true, uninstall: false) {
-		def masterInList = slaves?.id?.find{it==master?.id}
+		def masterInList = slaves.id.find{it==master.id}
         if (masterInList) {
         	section ("**WARNING**"){
             	paragraph "You have included the Master Light in the Slave Group. This will cause a loop in execution. Please remove this device from the Slave Group.", image: "https://raw.githubusercontent.com/MichaelStruck/SmartThingsPublic/master/img/caution.png"
             }
         }
         section("Master Light") {
-			input "master", "capability.colorControl", title: "Colored Light", required: true
+			input "master", "capability.colorControl", title: "Colored Light"
 		}
 		section("Lights that follow the master settings") {
-			input "slaves", "capability.colorControl", title: "Colored Lights",  multiple: true, required: true, submitOnChange: true
+			input "slaves", "capability.colorControl", title: "Colored Lights",  multiple: true, required: false, submitOnChange: true
 		}
     	section([mobileOnly:true], "Options") {
 			input "randomYes", "bool",title: "When Master Turned On, Randomize Color", defaultValue: false
@@ -82,44 +81,40 @@ def init() {
 }
 //-----------------------------------
 def onOffHandler(evt){
-	if (slaves && master) {
-		if (!slaves?.id.find{it==master?.id}){
-		if (master?.currentValue("switch") == "on"){
-		    if (randomYes) getRandomColorMaster()
-				else slaves?.on()
-		}
-		else {
-		    slaves?.off()  
-		}
-		}
+	if (!slaves.id.find{it==master.id}){
+        if (master.currentValue("switch") == "on"){
+            if (randomYes) getRandomColorMaster()
+			else slaves?.on()
+        }
+        else {
+            slaves?.off()  
+        }
 	}
 }
 
 def colorHandler(evt) {
-	if (slaves && master) {
-		if (!slaves?.id?.find{it==master?.id} && master?.currentValue("switch") == "on"){
-			log.debug "Changing Slave units H,S,L"
-		def dimLevel = master?.currentValue("level")
-		def hueLevel = master?.currentValue("hue")
-		def saturationLevel = master.currentValue("saturation")
-			def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
-		slaves?.setColor(newValue)
-		try {
-			log.debug "Changing Slave color temp"
-			def tempLevel = master?.currentValue("colorTemperature")
-			slaves?.setColorTemperature(tempLevel)
-		}
-			catch (e){
-			log.debug "Color temp for master --"
-		}
-		}
+   	if (!slaves.id.find{it==master.id} && master.currentValue("switch") == "on"){
+		log.debug "Changing Slave units H,S,L"
+    	def dimLevel = master.currentValue("level")
+    	def hueLevel = master.currentValue("hue")
+    	def saturationLevel = master.currentValue("saturation")
+		def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
+    	slaves?.setColor(newValue)
+    	try {
+    		log.debug "Changing Slave color temp"
+        	def tempLevel = master.currentValue("colorTemperature")
+    		slaves?.setColorTemperature(tempLevel)
+    	}
+   		catch (e){
+    		log.debug "Color temp for master --"
+    	}
 	}
 }
 
 def getRandomColorMaster(){
     def hueLevel = Math.floor(Math.random() *1000)
     def saturationLevel = Math.floor(Math.random() * 100)
-    def dimLevel = master?.currentValue("level")
+    def dimLevel = master.currentValue("level")
 	def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
     log.debug hueLevel
     log.debug saturationLevel
@@ -128,14 +123,12 @@ def getRandomColorMaster(){
 }
 
 def tempHandler(evt){
-	if (slaves && master) {
-	    if (!slaves?.id?.find{it==master?.id} && master?.currentValue("switch") == "on"){
-		if (evt.value != "--") {
-		    log.debug "Changing Slave color temp based on Master change"
-		    def tempLevel = master.currentValue("colorTemperature")
-		    slaves?.setColorTemperature(tempLevel)
-		}
-		}
+    if (!slaves.id.find{it==master.id} && master.currentValue("switch") == "on"){
+        if (evt.value != "--") {
+            log.debug "Changing Slave color temp based on Master change"
+            def tempLevel = master.currentValue("colorTemperature")
+            slaves?.setColorTemperature(tempLevel)
+        }
 	}
 }
 
@@ -146,7 +139,7 @@ private def textAppName() {
 }	
 
 private def textVersion() {
-    def text = "Version 1.1.1 (12/13/2016)"
+    def text = "Version 1.1.0 (11/09/2016)"
 }
 
 private def textCopyright() {
@@ -173,4 +166,4 @@ private def textHelp() {
     	"This application will allow you to control the settings of multiple colored lights with one control. " +
         "Simply choose a master control light, and then choose the lights that will follow the settings of the master, "+
         "including on/off conditions, hue, saturation, level and color temperature. Also includes a random color feature."
-}
+}

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -1,461 +0,0 @@
-/**
- *  OpenT2T SmartApp Test
- *
- *  Copyright 2016 OpenT2T
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-		name: "OpenT2T SmartApp Test",
-		namespace: "opent2t",
-		author: "OpenT2T",
-		description: "Test app to test end to end SmartThings scenarios via OpenT2T",
-		category: "SmartThings Labs",
-		iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-		iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-		iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
-
-/** --------------------+---------------+-----------------------+------------------------------------
- *  Device Type         | Attribute Name| Commands              | Attribute Values
- *  --------------------+---------------+-----------------------+------------------------------------
- *  switches            | switch        | on, off               | on, off
- *  motionSensors       | motion        |                       | active, inactive
- *  contactSensors      | contact       |                       | open, closed
- *  presenceSensors     | presence      |                       | present, 'not present'
- *  temperatureSensors  | temperature   |                       | <numeric, F or C according to unit>
- *  accelerationSensors | acceleration  |                       | active, inactive
- *  waterSensors        | water         |                       | wet, dry
- *  lightSensors        | illuminance   |                       | <numeric, lux>
- *  humiditySensors     | humidity      |                       | <numeric, percent>
- *  locks               | lock          | lock, unlock          | locked, unlocked
- *  garageDoors         | door          | open, close           | unknown, closed, open, closing, opening
- *  cameras             | image         | take                  | <String>
- *  thermostats         | thermostat    | setHeatingSetpoint,   | temperature, heatingSetpoint, coolingSetpoint,
- * 	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
- *                      |				| off, heat, cool, auto,| thermostatFanMode, thermostatOperatingState
- *                      |				| emergencyHeat,        |
- *                      |				| setThermostatMode,    |
- *                      |				| fanOn, fanAuto,       |
- *                      |				| fanCirculate,         |
- *                      |				| setThermostatFanMode  |
- *  --------------------+---------------+-----------------------+------------------------------------
- */
-
-//Device Inputs
-preferences {
-	section("Allow <PLACEHOLDER: Your App Name> to control these things...") {
-		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false
-		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
-		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-		input "cameras", "capability.videoCapture", title: "Which Cameras?", multiple: true, required: false
-		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false
-		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false
-		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false
-		input "thermostats", "capability.thermostat", title: "Which Thermostat?", multiple: true, required: false
-		input "waterSensors", "capability.waterSensor", title: "Which Water Leak Sensors?", multiple: true, required: false
-	}
-}
-
-def getInputs() {
-	def inputList = []
-	inputList += contactSensors ?: []
-	inputList += garageDoors ?: []
-	inputList += locks ?: []
-	inputList += cameras ?: []
-	inputList += motionSensors ?: []
-	inputList += presenceSensors ?: []
-	inputList += switches ?: []
-	inputList += thermostats ?: []
-	inputList += waterSensors ?: []
-	return inputList
-}
-
-//API external Endpoints
-mappings {
-	path("/subscriptionURL/:url") {
-		action:
-		[
-				PUT: "updateEndpointURL"
-		]
-	}
-	path("/connectionId/:connId") {
-		action:
-		[
-				PUT: "updateConnectionId"
-		]
-	}
-	path("/devices") {
-		action:
-		[
-				GET: "getDevices"
-		]
-	}
-	path("/devices/:id") {
-		action:
-		[
-				GET: "getDevice"
-		]
-	}
-	path("/update/:id") {
-		action:
-		[
-				PUT: "updateDevice"
-		]
-	}
-	path("/subscription/:id") {
-		action:
-		[
-				POST  : "registerDeviceChange",
-				DELETE: "unregisterDeviceChange"
-		]
-	}
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-	unsubscribe()
-	registerSubscriptions()
-}
-
-def initialize() {
-	state.connectionId = ""
-	state.endpointURL = "https://ifs.windows-int.com/v1/cb/81C7E77B-EABC-488A-B2BF-FEC42F0DABD2/notify"
-	registerSubscriptions()
-}
-
-//Subscribe events for all devices
-def registerSubscriptions() {
-	registerChangeHandler(inputs)
-}
-
-//Subscribe to events from a list of devices
-def registerChangeHandler(myList) {
-	myList.each { myDevice ->
-		def theAtts = myDevice.supportedAttributes
-		theAtts.each { att ->
-			subscribe(myDevice, att.name, eventHandler)
-			log.info "Registering ${myDevice.displayName}.${att.name}"
-		}
-	}
-}
-
-//Endpoints function: Subscribe to events from a specific device
-def registerDeviceChange() {
-	def myDevice = findDevice(params.id)
-	def theAtts = myDevice.supportedAttributes
-	try {
-		theAtts.each { att ->
-			subscribe(myDevice, att.name, eventHandler)
-			log.info "Registering ${myDevice.displayName}.${att.name}"
-		}
-		return ["succeed"]
-	} catch (e) {
-		httpError(500, "something went wrong: $e")
-	}
-}
-
-//Endpoints function: Unsubscribe to events from a specific device
-def unregisterDeviceChange() {
-	def myDevice = findDevice(params.id)
-	try {
-		unsubscribe(myDevice)
-		log.info "Unregistering ${myDevice.displayName}"
-		return ["succeed"]
-	} catch (e) {
-		httpError(500, "something went wrong: $e")
-	}
-}
-
-//When events are triggered, send HTTP post to web socket servers
-def eventHandler(evt) {
-	def evt_device_id = evt.deviceId
-	def evt_device_value = evt.value
-	def evt_name = evt.name
-	def evt_device = evt.device
-	def evt_deviceType = getDeviceType(evt_device);
-	def params = [
-			uri : "${state.endpointURL}/${state.connectionId}",
-			body: [
-					name        : evt_device.displayName,
-					id          : evt_device.id,
-					deviceType  : evt_deviceType,
-					manufacturer: evt_device.getManufacturerName(),
-					model       : evt_device.getModelName(),
-					attributes  : deviceAttributeList(evt_device)
-			]
-	]
-	try {
-		log.trace "POST URI: ${params.uri}"
-		log.trace "Payload: ${params.body}"
-		httpPostJson(params) { resp ->
-			resp.headers.each {
-				log.debug "${it.name} : ${it.value}"
-			}
-			log.trace "response status code: ${resp.status}"
-			log.trace "response data: ${resp.data}"
-		}
-	} catch (e) {
-		log.debug "something went wrong: $e"
-	}
-}
-
-//Endpoints function: update subcription endpoint url [state.endpoint]
-void updateEndpointURL() {
-	state.endpointURL = params.url
-	log.info "Updated EndpointURL to ${state.endpointURL}"
-}
-
-//Endpoints function: update global variable [state.connectionId]
-void updateConnectionId() {
-	def connId = params.connId
-	state.connectionId = connId
-	log.info "Updated ConnectionID to ${state.connectionId}"
-}
-
-//Endpoints function: return all device data in json format
-def getDevices() {
-	def deviceData = []
-	inputs?.each {
-		def deviceType = getDeviceType(it)
-		if (deviceType == "thermostat") {
-			deviceData << [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
-		} else {
-			deviceData << [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it)]
-		}
-	}
-
-	log.debug "getDevices, return: ${deviceData}"
-	return deviceData
-}
-
-//Endpoints function: get device data
-def getDevice() {
-	def it = findDevice(params.id)
-	def deviceType = getDeviceType(it)
-	def device
-	if (deviceType == "thermostat") {
-		device = [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
-	} else {
-		device = [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it)]
-	}
-	log.debug "getDevice, return: ${device}"
-	return device
-}
-
-//Endpoints function: update device data
-void updateDevice() {
-	def device = findDevice(params.id)
-	request.JSON.each {
-		def command = it.key
-		def value = it.value
-		if (command) {
-			def commandList = mapDeviceCommands(command, value)
-			command = commandList[0]
-			value = commandList[1]
-
-			if (command == "setAwayMode") {
-				log.info "Setting away mode to ${value}"
-				if (location.modes?.find { it.name == value }) {
-					location.setMode(value)
-				}
-			} else if (command == "thermostatSetpoint") {
-				switch (device.currentThermostatMode) {
-					case "cool":
-						log.info "Update: ${device.displayName}, [${command}, ${value}]"
-						device.setCoolingSetpoint(value)
-						break
-					case "heat":
-					case "emergency heat":
-						log.info "Update: ${device.displayName}, [${command}, ${value}]"
-						device.setHeatingSetpoint(value)
-						break
-					default:
-						httpError(501, "this mode: ${device.currentThermostatMode} does not allow changing thermostat setpoint.")
-						break
-				}
-			} else if (!device) {
-				log.error "updateDevice, Device not found"
-				httpError(404, "Device not found")
-			} else if (!device.hasCommand(command)) {
-				log.error "updateDevice, Device does not have the command"
-				httpError(404, "Device does not have such command")
-			} else {
-				if (command == "setColor") {
-					log.info "Update: ${device.displayName}, [${command}, ${value}]"
-					device."$command"(hex: value)
-				} else if (value.isNumber()) {
-					def intValue = value as Integer
-					log.info "Update: ${device.displayName}, [${command}, ${intValue}(int)]"
-					device."$command"(intValue)
-				} else if (value) {
-					log.info "Update: ${device.displayName}, [${command}, ${value}]"
-					device."$command"(value)
-				} else {
-					log.info "Update: ${device.displayName}, [${command}]"
-					device."$command"()
-				}
-			}
-		}
-	}
-}
-
-/*** Private Functions ***/
-
-//Return current location mode info
-private getLocationModeInfo() {
-	return [mode: location.mode, supported: location.modes.name]
-}
-
-//Map each device to a type given it's capabilities
-private getDeviceType(device) {
-	def deviceType
-	def caps = device.capabilities
-	log.debug "capabilities: [${device}, ${caps}]"
-	log.debug "supported commands: [${device}, ${device.supportedCommands}]"
-	caps.each {
-		switch (it.name.toLowerCase()) {
-			case "switch":
-				deviceType = "switch"
-				break
-			case "switch level":
-				deviceType = "light"
-				break
-			case "contact sensor":
-				deviceType = "contactSensor"
-				break
-			case "garageDoorControl":
-				deviceType = "garageDoor"
-				break
-			case "lock":
-				deviceType = "lock"
-				break
-			case "video camera":
-				deviceType = "camera"
-				break
-			case "motion sensor":
-				deviceType = "motionSensor"
-				break
-			case "presence sensor":
-				deviceType = "presenceSensor"
-				break
-			case "thermostat":
-				deviceType = "thermostat"
-				break
-			case "water sensor":
-				deviceType = "waterSensor"
-				break
-			default:
-				break
-		}
-	}
-	return deviceType
-}
-
-//Return a specific device give the device ID.
-private findDevice(deviceId) {
-	return inputs?.find { it.id == deviceId }
-}
-
-//Return a list of device attributes
-private deviceAttributeList(device) {
-	device.supportedAttributes.collectEntries { attribute ->
-		try {
-			[(attribute.name): device.currentValue(attribute.name)]
-		} catch (e) {
-			[(attribute.name): null]
-		}
-	}
-}
-
-//Map device command and value.
-//input command and value are from UWP,
-//returns resultCommand and resultValue that corresponds with function and value in SmartApps
-private mapDeviceCommands(command, value) {
-	log.debug "mapDeviceCommands: [${command}, ${value}]"
-	def resultCommand = command
-	def resultValue = value
-	switch (command) {
-		case "switch":
-			if (value == 1 || value == "1" || value == "on") {
-				resultCommand = "on"
-				resultValue = ""
-			} else if (value == 0 || value == "0" || value == "off") {
-				resultCommand = "off"
-				resultValue = ""
-			}
-			break
-	// light attributes
-		case "level":
-			resultCommand = "setLevel"
-			resultValue = value
-			break
-		case "hue":
-			resultCommand = "setHue"
-			resultValue = value
-			break
-		case "saturation":
-			resultCommand = "setSaturation"
-			resultValue = value
-			break
-		case "ct":
-			resultCommand = "setColorTemperature"
-			resultValue = value
-			break
-		case "color":
-			resultCommand = "setColor"
-			resultValue = value
-	// thermostat attributes
-		case "hvacMode":
-			resultCommand = "setThermostatMode"
-			resultValue = value
-			break
-		case "fanMode":
-			resultCommand = "setThermostatFanMode"
-			resultValue = value
-			break
-		case "awayMode":
-			resultCommand = "setAwayMode"
-			resultValue = value
-			break
-		case "coolingSetpoint":
-			resultCommand = "setCoolingSetpoint"
-			resultValue = value
-			break
-		case "heatingSetpoint":
-			resultCommand = "setHeatingSetpoint"
-			resultValue = value
-			break
-		case "thermostatSetpoint":
-			resultCommand = "thermostatSetpoint"
-			resultValue = value
-			break
-	// lock attributes
-		case "locked":
-			if (value == 1 || value == "1" || value == "lock") {
-				resultCommand = "lock"
-				resultValue = ""
-			} else if (value == 0 || value == "0" || value == "unlock") {
-				resultCommand = "unlock"
-				resultValue = ""
-			}
-			break
-		default:
-			break
-	}
-
-	return [resultCommand, resultValue]
-}
-

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -172,34 +172,18 @@ def bulbDiscovery() {
 			if (existingLightsDescription.isEmpty()) {
 				existingLightsDescription += it.value
 			} else {
-				existingLightsDescription += ", ${it.value}"
+				 existingLightsDescription += ", ${it.value}"
 			}
 		}
 	}
 
-	if (bulbRefreshCount > 200 && numFound == 0) {
-		// Time out to avoid endless discovery
-		state.inBulbDiscovery = false
-		bulbRefreshCount = 0
-		return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Failed!", nextPage:"", refreshInterval:0, install:true, uninstall: true) {
-			section("Failed to discover any lights, please try again later. Click Done to exit.") {
-				//input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, submitOnChange: true, options:newLights
-				paragraph title: "Previously added Hue Lights (${existingLights.size()} added)", existingLightsDescription
-			}
-			section {
-				href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
-			}
+	return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
+		section("Please wait while we discover your Hue Lights. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
+			input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, submitOnChange: true, options:newLights
+			paragraph title: "Previously added Hue Lights (${existingLights.size()} added)", existingLightsDescription
 		}
-
-	} else {
-		return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
-			section("Please wait while we discover your Hue Lights. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-				input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, submitOnChange: true, options:newLights
-				paragraph title: "Previously added Hue Lights (${existingLights.size()} added)", existingLightsDescription
-			}
-			section {
-				href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
-			}
+		section {
+			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
 		}
 	}
 }
@@ -423,7 +407,7 @@ def addBridge() {
 	if(vbridge) {
 		def d = getChildDevice(selectedHue)
 		if(!d) {
-			// compatibility with old devices
+	 		// compatibility with old devices
 			def newbridge = true
 			childDevices.each {
 				if (it.getDeviceDataByName("mac")) {
@@ -609,7 +593,7 @@ def locationHandler(evt) {
 	log.trace "Location: $description"
 
 	def hub = evt?.hubId
-	def parsedEvent = parseLanMessage(description)
+ 	def parsedEvent = parseLanMessage(description)
 	parsedEvent << ["hub":hub]
 
 	if (parsedEvent?.ssdpTerm?.contains("urn:schemas-upnp-org:device:basic:1")) {
@@ -835,7 +819,8 @@ def parse(childDevice, description) {
 			try {
 				body = new groovy.json.JsonSlurper().parseText(bodyString)
 			} catch (all) {
-				log.warn "Parsing Body failed"
+				log.warn "Parsing Body failed - trying again..."
+				poll()
 			}
 			if (body instanceof java.util.Map) {
 				// get (poll) reponse
@@ -859,7 +844,7 @@ private sendColorEvents(device, xy, hue, sat, ct, colormode = null) {
 
 	def events = [:]
 	// For now, only care about changing color temperature if requested by user
-	if (ct != null && ct != 0 && (colormode == "ct" || (xy == null && hue == null && sat == null))) {
+	if (ct != null && (colormode == "ct" || (xy == null && hue == null && sat == null))) {
 		// for some reason setting Hue to their specified minimum off 153 yields 154, dealt with below
 		// 153 (6500K) to 500 (2000K)
 		def temp = (ct == 154) ? 6500 : Math.round(1000000 / ct)
@@ -1267,7 +1252,7 @@ private getBridgeIP() {
 		if (d) {
 			if (d.getDeviceDataByName("networkAddress"))
 				host =  d.getDeviceDataByName("networkAddress")
-			else
+		else
 				host = d.latestState('networkAddress').stringValue
 		}
 		if (host == null || host == "") {