MSA-1661: null

Merge pull request #1519 from SmartThingsCommunity/staging
Rolling down staging hotfix to master
2026-03-10 21:03:04 +00:00 · 2016-12-20 10:38:03 -08:00 · 2016-12-07 14:15:16 -08:00 · 2016-12-07 12:10:01 -08:00 · 2016-12-02 11:39:24 -08:00 · 2016-12-01 14:52:24 -06:00
13 changed files with 237 additions and 28 deletions
--- a/devicetypes/ps/generic-camera-device.src/generic-camera-device.groovy
+++ b/devicetypes/ps/generic-camera-device.src/generic-camera-device.groovy
@@ -0,0 +1,206 @@
+/**
+ *  Generic Camera Device v1.0.07102014
+ *
+ *  Copyright 2014 patrick@patrickstuart.com
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Generic Camera Device", namespace: "ps", author: "patrick@patrickstuart.com") {
+		capability "Image Capture"
+		capability "Sensor"
+		capability "Actuator"
+        
+		attribute "hubactionMode", "string"
+        
+	}
+
+    preferences {
+    input("CameraIP", "string", title:"Camera IP Address", description: "Please enter your camera's IP Address", required: true, displayDuringSetup: true)
+    input("CameraPort", "string", title:"Camera Port", description: "Please enter your camera's Port", defaultValue: 80 , required: true, displayDuringSetup: true)
+    input("CameraPath", "string", title:"Camera Path to Image", description: "Please enter the path to the image", defaultValue: "/SnapshotJPEG?Resolution=640x480&Quality=Clarity", required: true, displayDuringSetup: true)
+    input("CameraAuth", "bool", title:"Does Camera require User Auth?", description: "Please choose if the camera requires authentication (only basic is supported)", defaultValue: true, displayDuringSetup: true)
+    input("CameraPostGet", "string", title:"Does Camera use a Post or Get, normally Get?", description: "Please choose if the camera uses a POST or a GET command to retreive the image", defaultValue: "GET", displayDuringSetup: true)
+    input("CameraUser", "string", title:"Camera User", description: "Please enter your camera's username", required: false, displayDuringSetup: true)
+    input("CameraPassword", "string", title:"Camera Password", description: "Please enter your camera's password", required: false, displayDuringSetup: true)
+	}
+    
+	simulator {
+    
+	}
+/*
+	tiles {
+		standardTile("camera", "device.image", width: 1, height: 1, canChangeIcon: false, inactiveLabel: true, canChangeBackground: true) {
+			state "default", label: "", action: "", icon: "st.camera.dropcam-centered", backgroundColor: "#FFFFFF"
+		}
+		carouselTile("cameraDetails", "device.image", width: 3, height: 2) { }
+		standardTile("take", "device.image", width: 1, height: 1, canChangeIcon: false, inactiveLabel: true, canChangeBackground: false) {
+			state "take", label: "Take", action: "Image Capture.take", icon: "st.camera.camera", backgroundColor: "#FFFFFF", nextState:"taking"
+			state "taking", label:'Taking', action: "", icon: "st.camera.take-photo", backgroundColor: "#53a7c0"
+			//state "image", label: "Take", action: "Image Capture.take", icon: "st.camera.camera", backgroundColor: "#FFFFFF", nextState:"taking"
+		}
+	standardTile("blank", "device.image", width: 1, height: 1, canChangeIcon: false, canChangeBackground: false, decoration: "flat") {
+            state "blank", label: "", action: "", icon: "", backgroundColor: "#FFFFFF"
+        }
+		main "camera"
+		details(["cameraDetails", "blank", "take"])
+	}
+    
+    */
+    tiles {
+        standardTile("take", "device.image", width: 1, height: 1, canChangeIcon: false, inactiveLabel: true, canChangeBackground: false) {
+            state "take", label: "Take", action: "Image Capture.take", icon: "st.camera.camera", backgroundColor: "#FFFFFF", nextState:"taking"
+            state "taking", label:'Taking', action: "", icon: "st.camera.take-photo", backgroundColor: "#53a7c0"
+            state "image", label: "Take", action: "Image Capture.take", icon: "st.camera.camera", backgroundColor: "#FFFFFF", nextState:"taking"
+        }
+
+        standardTile("refresh", "device.alarmStatus", inactiveLabel: false, decoration: "flat") {
+            state "refresh", action:"polling.poll", icon:"st.secondary.refresh"
+        }
+        standardTile("blank", "device.image", width: 1, height: 1, canChangeIcon: false, canChangeBackground: false, decoration: "flat") {
+            state "blank", label: "", action: "", icon: "", backgroundColor: "#FFFFFF"
+        }
+        carouselTile("cameraDetails", "device.image", width: 3, height: 2) { }
+        main "take"
+        details([ "take", "blank", "refresh", "cameraDetails"])
+    }
+}
+
+def parse(String description) {
+    log.debug "Parsing '${description}'"
+    def map = [:]
+	def retResult = []
+	def descMap = parseDescriptionAsMap(description)
+	//Image
+	if (descMap["bucket"] && descMap["key"]) {
+		putImageInS3(descMap)
+	} 
+}
+
+// handle commands
+def take() {
+	def userpassascii = "${CameraUser}:${CameraPassword}"
+	def userpass = "Basic " + userpassascii.encodeAsBase64().toString()
+    def host = CameraIP 
+    def hosthex = convertIPtoHex(host)
+    def porthex = convertPortToHex(CameraPort)
+    device.deviceNetworkId = "$hosthex:$porthex" 
+    
+    log.debug "The device id configured is: $device.deviceNetworkId"
+    
+    def path = CameraPath 
+    log.debug "path is: $path"
+    log.debug "Requires Auth: $CameraAuth"
+    log.debug "Uses which method: $CameraPostGet"
+    
+    def headers = [:] 
+    headers.put("HOST", "$host:$CameraPort")
+   	if (CameraAuth) {
+        headers.put("Authorization", userpass)
+    }
+    
+    log.debug "The Header is $headers"
+    
+    def method = "GET"
+    try {
+    	if (CameraPostGet.toUpperCase() == "POST") {
+        	method = "POST"
+        	}
+        }
+    catch (Exception e) { // HACK to get around default values not setting in devices
+    	settings.CameraPostGet = "GET"
+        log.debug e
+        log.debug "You must not of set the perference for the CameraPOSTGET option"
+    }
+    
+    log.debug "The method is $method"
+    
+    try {
+    def hubAction = new physicalgraph.device.HubAction(
+    	method: method,
+    	path: path,
+    	headers: headers
+        )
+        	
+    hubAction.options = [outputMsgToS3:true]
+    log.debug hubAction
+    hubAction
+    }
+    catch (Exception e) {
+    	log.debug "Hit Exception $e on $hubAction"
+    }
+    
+}
+def putImageInS3(map) {
+	log.debug "firing s3"
+    def s3ObjectContent
+    try {
+        def imageBytes = getS3Object(map.bucket, map.key + ".jpg")
+        if(imageBytes)
+        {
+            s3ObjectContent = imageBytes.getObjectContent()
+            def bytes = new ByteArrayInputStream(s3ObjectContent.bytes)
+            storeImage(getPictureName(), bytes)
+        }
+    }
+    catch(Exception e) {
+        log.error e
+    }
+	finally {
+    //Explicitly close the stream
+		if (s3ObjectContent) { s3ObjectContent.close() }
+	}
+}
+
+def parseDescriptionAsMap(description) {
+description.split(",").inject([:]) { map, param ->
+def nameAndValue = param.split(":")
+map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+}
+}
+
+private getPictureName() {
+	def pictureUuid = java.util.UUID.randomUUID().toString().replaceAll('-', '')
+    log.debug pictureUuid
+    def picName = device.deviceNetworkId.replaceAll(':', '') + "_$pictureUuid" + ".jpg"
+	return picName
+}
+
+private String convertIPtoHex(ipAddress) { 
+    String hex = ipAddress.tokenize( '.' ).collect {  String.format( '%02x', it.toInteger() ) }.join()
+    log.debug "IP address entered is $ipAddress and the converted hex code is $hex"
+    return hex
+
+}
+
+private String convertPortToHex(port) {
+	String hexport = port.toString().format( '%04x', port.toInteger() )
+    log.debug hexport
+    return hexport
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+
+private String convertHexToIP(hex) {
+	log.debug("Convert hex to ip: $hex") 
+	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+}
+
+private getHostAddress() {
+	def parts = device.deviceNetworkId.split(":")
+    log.debug device.deviceNetworkId
+	def ip = convertHexToIP(parts[0])
+	def port = convertHexToInt(parts[1])
+	return ip + ":" + port
+}
--- a/devicetypes/smartthings/life360-user.src/life360-user.groovy
+++ b/devicetypes/smartthings/life360-user.src/life360-user.groovy
@@ -39,7 +39,7 @@ metadata {
 }

 def generatePresenceEvent(boolean present) {
-	log.debug "Here in generatePresenceEvent!"
+	log.info "Life360 generatePresenceEvent($present)"
 	def value = formatValue(present)
 	def linkText = getLinkText(device)
 	def descriptionText = formatDescriptionText(linkText, present)
--- a/devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy
@@ -128,7 +128,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00){
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
--- a/devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy
@@ -132,7 +132,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
--- a/devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy
@@ -161,7 +161,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if(cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
@@ -339,7 +339,7 @@ private Map getContactResult(value) {
 	log.debug "Contact: ${device.displayName} value = ${value}"
 	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
 	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
-	sendEvent(name: 'status', value: value, descriptionText: descriptionText, translatable: true)
+	return [name: 'status', value: value, descriptionText: descriptionText, translatable: true]
 }

 private getAccelerationResult(numValue) {
--- a/devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy
@@ -119,7 +119,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07){
 					if (cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
--- a/devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy
@@ -103,7 +103,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00){
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
--- a/devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy
+++ b/devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy
@@ -23,9 +23,11 @@ metadata {


        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart A19 Soft White"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart BR30 Soft White"
    }

    tiles(scale: 2) {
--- a/devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy
+++ b/devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy
@@ -28,8 +28,8 @@ metadata {
 		capability "Switch Level"
 		capability "Health Check"

-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
 	}

 	// UI tile definitions
--- a/devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy
+++ b/devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy
@@ -32,11 +32,12 @@ metadata {
        attribute "colorName", "string"
        command "setGenericName"

-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED A19 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "OSRAM LIGHTIFY LED BR30 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "OSRAM LIGHTIFY LED RT 5/6 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "SYLVANIA Smart Flex RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "SYLVANIA Smart A19 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "SYLVANIA Smart BR30 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "SYLVANIA Smart RT5/6 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY FLEX OUTDOOR RGBW", deviceJoinName: "SYLVANIA Smart Outdoor RGBW Flex"
    }

    // UI tile definitions
--- a/devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy
+++ b/devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy
@@ -32,10 +32,10 @@ metadata {

        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04", outClusters: "0019"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Flood BR30 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Recessed Kit RT 5/6 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "SYLVANIA Smart BR30 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "SYLVANIA Smart RT5/6 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "SYLVANIA Smart A19 Tunable White"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "Z01-A19NAE26", deviceJoinName: "Sengled Element plus"
    }
--- a/devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy
+++ b/devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy
@@ -127,8 +127,8 @@ def configureHealthCheck() {

 def configure() {
    log.debug "configure()"
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
    configureHealthCheck()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

 def updated() {
--- a/smartapps/smartthings/life360-connect.src/life360-connect.groovy
+++ b/smartapps/smartthings/life360-connect.src/life360-connect.groovy
@@ -289,12 +289,12 @@ def initializeLife360Connection() {
       		state.life360AccessToken = result.data.access_token
            return true;
   		}
-		log.debug "Response=${result.data}"
+		log.info "Life360 initializeLife360Connection, response=${result.data}"
        return false;
        
    }
    catch (e) {
-       log.debug e
+       log.error "Life360 initializeLife360Connection, error: $e"
       return false;
    }

@@ -656,7 +656,7 @@ def generateInitialEvent (member, childDevice) {
    
    try { // we are going to just ignore any errors
    
-    	log.debug "Generate Initial Event for New Device for Member = ${member.id}"
+    	log.info "Life360 generateInitialEvent($member, $childDevice)"
        
        def place = state.places.find{it.id==settings.place}
        
@@ -677,6 +677,8 @@ def generateInitialEvent (member, childDevice) {
        	// log.debug "Distance Away = ${distanceAway}"
  
  			boolean isPresent = (distanceAway <= placeRadius)
+
+			log.info "Life360 generateInitialEvent, member: ($memberLatitude, $memberLongitude), place: ($placeLatitude, $placeLongitude), radius: $placeRadius, dist: $distanceAway, present: $isPresent"
                
        	// log.debug "External Id=${app.id}:${member.id}"
        
@@ -718,7 +720,7 @@ def haversine(lat1, lon1, lat2, lon2) {

 def placeEventHandler() {

-	log.debug "In placeEventHandler method."
+	log.info "Life360 placeEventHandler: params=$params, settings.place=$settings.place"

 	// the POST to this end-point will look like:
    // POST http://test.com/webhook?circleId=XXXX&placeId=XXXX&userId=XXXX&direction=arrive
@@ -729,8 +731,6 @@ def placeEventHandler() {
    def direction = params?.direction
    def timestamp = params?.timestamp
    
-    log.debug "Life360 Event: Circle: ${circleId}, Place: ${placeId}, User: ${userId}, Direction: ${direction}"
-
    if (placeId == settings.place) {

 		def presenceState = (direction=="in")
@@ -745,10 +745,10 @@ def placeEventHandler() {

 		if (deviceWrapper) {
 			deviceWrapper.generatePresenceEvent(presenceState)
-    		log.debug "Event raised on child device: ${externalId}"
+    		log.debug "Life360 event raised on child device: ${externalId}"
 		}
   		else {
-    		log.debug "Couldn't find child device associated with inbound Life360 event."
+    		log.warn "Life360 couldn't find child device associated with inbound Life360 event."
    	}
    }
Author	SHA1	Message	Date
Nick Clay	def6990de7	MSA-1661: null	2016-12-20 10:38:03 -08:00
Vinay Rao	0a82077b24	Merge pull request #1519 from SmartThingsCommunity/staging Rolling down staging hotfix to master	2016-12-07 14:15:16 -08:00
Vinay Rao	38ef9e5c77	Merge pull request #1517 from SmartThingsCommunity/production Rolling down production hotfix to staging	2016-12-07 12:10:01 -08:00
Vinay Rao	6a71615ca5	Merge pull request #1505 from varzac/sendevent-appengine-fix DPROT-215 Don't use sendEvent for AppEngine parse events	2016-12-02 11:39:24 -08:00
Zach Varberg	9939591005	Don't use sendEvent for AppEngine parse events With the changes made for https://smartthings.atlassian.net/browse/DPROT-200 there were a few DTHs that were using sendEvent to directly send events generated during parse. However, because using sendEvent didn't result in parse returning an event AppEngine would send the description up to the cloud DTH to be handled. In some cases this resulted in multiple events for the same device trigger. This resolves: https://smartthings.atlassian.net/browse/DPROT-215	2016-12-01 14:52:24 -06:00
Vinay Rao	d7f2bc1d79	Merge pull request #1502 from bflorian/PROB-1426-life360-logging PROB-1426 adding logging to Life360	2016-11-28 13:20:16 -08:00
bflorian	3c5d727d4c	PROB-1426 adding logging to Life360	2016-11-28 16:00:42 -05:00
Vinay Rao	bbad6dfa7a	Merge pull request #1501 from SmartThingsCommunity/staging Rolling down staging hotfix to master	2016-11-28 10:35:24 -08:00
Vinay Rao	df6c815aa4	Merge pull request #1500 from SmartThingsCommunity/production Rolling down production hotfix to staging	2016-11-28 10:34:01 -08:00
Tom Manley	d16ac00eb6	Merge pull request #1493 from tpmanley/hotfix/zll-dimmer-join-failure zll-dimmer-bulb: Fix bug in configure preventing devices from joining	2016-11-23 23:30:08 -06:00
Tom Manley	1941f56007	zll-dimmer-bulb: Fix bug in configure preventing devices from joining The configureHealthCheck method and therefore the configure method was returning a boolean which was causing an exception during the initial join that would prevent the device from showing up to the user. https://smartthings.atlassian.net/browse/PROB-1428	2016-11-23 23:01:05 -06:00
Vinay Rao	f34df19a65	Merge pull request #1490 from SmartThingsCommunity/master Rolling up master to staging	2016-11-22 13:00:00 -08:00
Vinay Rao	af40246655	Merge pull request #1489 from SmartThingsCommunity/staging Rolling down staging hotfix to master	2016-11-22 12:59:05 -08:00
Vinay Rao	60756e6dc6	Merge pull request #1478 from yafenzhang/MSA-1591-15 MSA-1591: New Device Handle for Osram Lightify Light(ZHA)	2016-11-21 09:26:08 -08:00
Zhang Yafen	61d1205e7d	MSA-1591: 1.New Device Handle for Osram Lightify Light(ZHA) (1) SYLVANIA Smart BR30 Softw White (2) SYLVANIA Smart PAR38 Softw White (3) SYLVANIA Smart Outdoor RGBW Flex 2. Modify deviceJoinName of NAFTA Lightify product, all the lightify product which use ZHA protocol will be named using "SYLVANIA Smart XXXX".	2016-11-16 19:57:46 +08:00