MSA-1488: mu home automation

README.md

@@ -1,10 +1,10 @@
-# SmartThings Public GitHub Repo
+# SmartThings Public Github Repo
 
 An official list of SmartApps and Device Types from SmartThings.
 
 Here are some links to help you get started coding right away:
 
-* [GitHub-specific Documentation](http://docs.smartthings.com/en/latest/tools-and-ide/github-integration.html)
+* [Github-specific Documentation](http://docs.smartthings.com/en/latest/tools-and-ide/github-integration.html)
 * [Full Documentation](http://docs.smartthings.com)
 * [IDE & Simulator](http://ide.smartthings.com)
 * [Community Forums](http://community.smartthings.com)

devicetypes/erocm123/sonoff-wifi-switch-2-0.src/sonoff-wifi-switch-2-0.groovy

@@ -0,0 +1,320 @@
+/**
+ *  Copyright 2016 Eric Maycock
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Sonoff Wifi Switch 2.0
+ *
+ *  Author: Eric Maycock (erocm123)
+ *  Date: 2016-01-27
+ */
+ 
+import groovy.json.JsonSlurper
+import groovy.util.XmlSlurper
+
+metadata {
+	definition (name: "Sonoff Wifi Switch 2.0", namespace: "erocm123", author: "Eric Maycock") {
+        capability "Actuator"
+		capability "Switch"
+		capability "Refresh"
+		capability "Sensor"
+        capability "Configuration"
+        
+        command "reboot"
+	}
+
+	simulator {
+	}
+    
+    preferences {
+        input("ip", "string", title:"IP Address", description: "192.168.1.150" ,required: true, displayDuringSetup: true)
+        // Port should always be 80
+        //input("port", "string", title:"Port", description: "80" , required: true, displayDuringSetup: true)
+	}
+
+	tiles (scale: 2){      
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+        }
+
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+        standardTile("configure", "device.configure", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+        valueTile("reboot", "device.reboot", decoration: "flat", height: 2, width: 2, inactiveLabel: false, canChangeIcon: false) {
+            state "default", label:"Reboot", action:"reboot", icon:"", backgroundColor:"#FFFFFF"
+        }
+        valueTile("hubInfo", "device.hubInfo", decoration: "flat", height: 2, width: 6, inactiveLabel: false, canChangeIcon: false) {
+            state "hubInfo", label:'${currentValue}' //backgroundColor:"#FFFFFF"
+        }
+        
+    }
+
+	main(["switch"])
+	details(["switch",
+             "refresh","configure","reboot",
+             "hubInfo"])
+}
+
+def installed() {
+	log.debug "installed()"
+	configure()
+}
+
+def updated() {
+	log.debug "updated()"
+    configure()
+}
+
+def configure() {
+	log.debug "configure()"
+	log.debug "Configuring Device For SmartThings Use"
+    state.ruleConfigured = false
+    state.switchConfigured = false
+    state.buttonConfigured = false
+    sendEvent(name:"hubInfo", value:"Sonoff switch still being configured")
+    if (state.MAC != null) state.dni = setDeviceNetworkId(state.MAC)
+    else 
+    if (ip != null) state.dni = setDeviceNetworkId(ip, "80")
+    state.hubIP = device.hub.getDataValue("localIP")
+    response(setupDevices() + setupRules() + refresh())
+}
+
+def setupDevices() {
+    def cmds = []
+    cmds << postAction("/devices?index=1&page=1", "taskdevicenumber=1&edit=1&page=1")
+    cmds << postAction("/devices?index=1&page=1", "taskdevicenumber=1&taskdevicename=BUTTON&taskdevicetimer=0&taskdeviceid=1&taskdevicepin1=0&taskdevicepin1pullup=on&plugin_001_type=1&plugin_001_button=2&taskdevicevaluename1=Switch&edit=1&page=1")
+    cmds << postAction("/devices?index=2&page=1", "taskdevicenumber=1&edit=1&page=1")
+    cmds << postAction("/devices?index=2&page=1", "taskdevicenumber=1&taskdevicename=SWITCH&taskdevicetimer=0&taskdeviceid=2&taskdevicepin1=12&taskdevicepin1pullup=on&plugin_001_type=1&plugin_001_button=0&taskdevicesenddata=on&taskdevicevaluename1=Switch&edit=1&page=1")
+    return delayBetween(cmds, 1000)
+}
+
+def setupRules() {
+    def cmds = []
+    cmds << postAction("/advanced", "mqttsubscribe=&mqttpublish=&messagedelay=1000&ip=0&ntphost=&timezone=0&syslogip=0.0.0.0&sysloglevel=0&udpport=0&useserial=on&serialloglevel=0&webloglevel=0&baudrate=115200&wdi2caddress=0&wireclockstretchlimit=0&userules=on&edit=1")
+    cmds << postAction("/rules", "rules=On+BUTTON%23Switch+do%0D%0A++if+%5BSWITCH%23Switch%5D%3D0%0D%0A++++gpio%2C12%2C1%0D%0A++else%0D%0A++++gpio%2C12%2C0%0D%0A++endif%0D%0Aendon%0D%0A%0D%0AOn+SWITCH%23Switch+do%0D%0A+if+%5BSWITCH%23Switch%5D%3D1%0D%0A++++gpio%2C13%2C0%0D%0A++else%0D%0A++++gpio%2C13%2C1%0D%0A++endif%0D%0Aendon")
+    return delayBetween(cmds, 1000)
+}
+
+def setupConfig() {
+    // Automatic config page submit not working at this time. Has to be done manually
+    /*def hubIP = device.hub.getDataValue("localIP")
+    log.debug "Hub IP: ${hubIP}"
+    def cmds = []
+    //cmds << postAction("/config", "protocol=1&usedns=0&controllerip=$hubIP&controllerport=39500&controlleruser=&controllerpassword=&delay=60")
+    return delayBetween(cmds, 1000)*/
+}
+
+def parse(description) {
+	//log.debug "Parsing: ${description}"
+    def events = []
+    def cmds
+    def descMap = parseDescriptionAsMap(description)
+    def body
+    log.debug "descMap: ${descMap}"
+    
+
+    if (!state.MAC || state.MAC != descMap["mac"]) {
+		log.debug "Mac address of device found ${descMap["mac"]}"
+        updateDataValue("MAC", descMap["mac"])
+	}
+    
+    if (state.MAC != null && state.dni != state.MAC) state.dni = setDeviceNetworkId(state.MAC)
+    if (descMap["body"]) body = new String(descMap["body"].decodeBase64())
+
+    if (body && body != "") {
+
+    
+    if(body.startsWith("{") || body.startsWith("[")) {
+    def slurper = new JsonSlurper()
+    def result = slurper.parseText(body)
+    
+    //log.debug "result: ${result}"
+    
+    if (result.containsKey("Sensors")) {
+        def mySwitch = result.Sensors.find { it.TaskName == "SWITCH" }
+        def myButton = result.Sensors.find { it.TaskName == "BUTTON" }
+        def myLED = result.Sensors.find { it.TaskName == "LED" }
+        if (mySwitch) { 
+            events << createEvent(name:"switch", value: (mySwitch.Switch.toInteger() == 0 ? 'off' : 'on'))
+            state.switchConfigured = true
+        }
+        if (myButton) state.buttonConfigured = true
+        //if (myLED) log.debug "LED is ${(myLED.Switch.toInteger() == 0 ? 'off' : 'on')}"
+    }
+    if (result.containsKey("pin")) {
+        if (result.pin == 12) events << createEvent(name:"switch", value: (result.state.toInteger() == 0 ? 'off' : 'on'))
+    }
+
+    if (result.containsKey("System")) {
+        if (result.System.containsKey("Uptime")) log.debug "System has been up ${result.System.Uptime.toInteger() / 60} hours"
+    }
+    } else {
+        //log.debug "Response is not JSON: $body"
+        def ruleSearch = "OnBUTTONSwitchdoifSWITCHSwitch0gpio121elsegpio120endifendonOnSWITCHSwitchdoifSWITCHSwitch1gpio130elsegpio131endifendon"
+        if (body.replaceAll("\\W", "").indexOf(ruleSearch) > 0) state.ruleConfigured = true
+
+    }
+    } else {
+        cmds = refresh()
+    }
+    
+    if (settings.ip) {
+        //log.debug "switch: $state.switchConfigured, button: $state.buttonConfigured, rule: $state.ruleConfigured"
+        if (state.switchConfigured == true && state.buttonConfigured == true && state.ruleConfigured == true) {
+            events << createEvent(name:"hubInfo", value:"For instant status updates, configure switch at http://$settings.ip/config | Hub Info - IP: ${device.hub.getDataValue("localIP")}, Port: 39500")
+        } else {
+            events << createEvent(name:"hubInfo", value:"Sonoff switch still being configured")
+        }
+    }
+    else { 
+        events << createEvent(name:"hubInfo", value:"IP address of the switch not entered. Please do so in device preferences.") 
+    }
+
+    if (cmds) return cmds else return events
+
+}
+
+def parseDescriptionAsMap(description) {
+	description.split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+        
+        if (nameAndValue.length == 2) map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+        else map += [(nameAndValue[0].trim()):""]
+	}
+}
+
+private parseHTML(html) {
+   //log.debug html
+   def myHtml = html.split("<")
+   def result = []
+   switch (myHtml[0]) {
+      case "GPIO 12 Set to 0":
+      result = [name: "switch", value: "off"]
+      break
+      case "GPIO 12 Set to 1":
+      result = [name: "switch", value: "on"]
+      break
+      case "GPIO 13 Set to 0":
+      log.debug "LED is on"
+      break
+      case "GPIO 13 Set to 1":
+      log.debug "LED is off"
+      break
+      default:
+      break
+   }
+   return result
+}
+
+private ledOn() {
+   return getAction("/control?cmd=GPIO,13,0")
+}
+
+private ledOff() {
+   return getAction("/control?cmd=GPIO,13,1")
+}
+
+def on() {
+	log.debug "on()"
+    def cmds = []
+    cmds << getAction("/control?cmd=GPIO,12,1")
+    return cmds
+}
+
+def off() {
+    log.debug "off()"
+	def cmds = []
+    cmds << getAction("/control?cmd=GPIO,12,0")
+    return cmds
+}
+
+def refresh() {
+	log.debug "refresh()"
+    def cmds = []
+    cmds << getAction("/json")
+    return cmds
+}
+
+private getAction(uri){ 
+  updateDNI()
+  def headers = getHeader()
+  def hubAction = new physicalgraph.device.HubAction(
+    method: "GET",
+    path: uri,
+    headers: headers
+  )
+  return hubAction    
+}
+
+private postAction(uri, data){ 
+  updateDNI()
+  def headers = getHeader()
+  def hubAction = new physicalgraph.device.HubAction(
+    method: "POST",
+    path: uri,
+    headers: headers,
+    body: data
+  )
+  return hubAction    
+}
+
+private setDeviceNetworkId(ip, port = null){
+    def myDNI
+    if (port == null) {
+        myDNI = ip
+    } else {
+  	    def iphex = convertIPtoHex(ip)
+  	    def porthex = convertPortToHex(port)
+        myDNI = "$iphex:$porthex"
+    }
+    log.debug "Device Network Id set to ${myDNI}"
+    return myDNI
+}
+
+private updateDNI() { 
+    if (device.deviceNetworkId != state.dni) {
+        device.deviceNetworkId = state.dni
+    }
+}
+
+private getHostAddress() {
+	return "${ip}:80"
+}
+
+private String convertIPtoHex(ipAddress) { 
+    String hex = ipAddress.tokenize( '.' ).collect {  String.format( '%02x', it.toInteger() ) }.join()
+    return hex
+}
+
+private String convertPortToHex(port) {
+	String hexport = port.toString().format( '%04x', port.toInteger() )
+    return hexport
+}
+
+private getHeader(){
+    def headers = [:]
+    headers.put("Host", getHostAddress())
+    headers.put("Content-Type", "application/x-www-form-urlencoded")
+    return headers
+}
+
+def reboot() {
+	log.debug "reboot()"
+    def uri = "/?cmd=reboot"
+    getAction(uri)
+}

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -127,10 +127,9 @@ def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelR
 	def map = [ displayed: true ]
     switch (cmd.sensorType) {
     	case 1:
-			def cmdScale = cmd.scale == 1 ? "F" : "C"
-			map.name = "temperature"
-            map.unit = getTemperatureScale()
-            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+        	map.name = "temperature"
+            map.unit = cmd.scale == 1 ? "F" : "C"
+            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, map.unit, cmd.precision)
             break
     	case 3:
         	map.name = "illuminance"

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -15,7 +15,6 @@ metadata {
 	definition (name: "Aeon Key Fob", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Button"
-		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
@@ -119,16 +118,3 @@ def configure() {
 	log.debug("Sending configuration: $cmd")
 	return cmd
 }
-
-
-def installed() {
-	initialize()
-}
-
-def updated() {
-	initialize()
-}
-
-def initialize() {
-	sendEvent(name: "numberOfButtons", value: 4)
-}

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -15,7 +15,6 @@ metadata {
 	definition (name: "Aeon Minimote", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Button"
-		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
 
@@ -108,16 +107,3 @@ def configure() {
 	log.debug("Sending configuration: $cmds")
 	return cmds
 }
-
-
-def installed() {
-	initialize()
-}
-
-def updated() {
-	initialize()
-}
-
-def initialize() {
-	sendEvent(name: "numberOfButtons", value: 4)
-}

devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy

@@ -87,27 +87,16 @@ def beep() {
 	up to this long from the time you send the message to the time you hear a sound.
 	*/
 
-	// Used source endpoint of 0x02 because we are using smartthings manufacturer specific cluster.
 	[
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
+		"raw 0xFC05 {15 0A 11 00 00 15 01}"
 	]
 }
 

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -27,7 +27,7 @@ metadata {
         capability "Switch"
         capability "Refresh"
         capability "Music Player"
-        capability "Health Check"
+        capability "Polling"
 
         /**
          * Define all commands, ie, if you have a custom action not
@@ -236,33 +236,7 @@ def parse(String event) {
  * @return action(s) to take or null
  */
 def installed() {
-    // Notify health check about this device with timeout interval 12 minutes
-    sendEvent(name: "checkInterval", value: 12 * 60, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
-    startPoll()
-}
-
-/**
- * Called by health check if no events been generated in the last 12 minutes
- * If device doesn't respond it will be marked offline (not available)
- */
-def ping() {
-    TRACE("ping")
-    boseSendGetNowPlaying()
-}
-
-/**
- * Schedule a 2 minute poll of the device to refresh the
- * tiles so the user gets the correct information.
- */
-def startPoll() {
-    TRACE("startPoll")
-    unschedule()
-    // Schedule 2 minute polling of speaker status (song average length is 3-4 minutes)
-    def sec = Math.round(Math.floor(Math.random() * 60))
-    //def cron = "$sec 0/5 * * * ?" // every 5 min
-    def cron = "$sec 0/2 * * * ?" // every 2 min
-    log.debug "schedule('$cron', boseSendGetNowPlaying)"
-    schedule(cron, boseSendGetNowPlaying)
+    onAction("refresh")
 }
 
 /**
@@ -342,6 +316,14 @@ def onAction(String user, data=null) {
     return actions
 }
 
+/**
+ * Called every so often (every 5 minutes actually) to refresh the
+ * tiles so the user gets the correct information.
+ */
+def poll() {
+    return boseRefreshNowPlaying()
+}
+
 /**
  * Joins this speaker into the everywhere zone
  */
@@ -855,10 +837,6 @@ def boseRefreshNowPlaying(delay=0) {
     return boseGET("/now_playing")
 }
 
-def boseSendGetNowPlaying() {
-    sendHubCommand(boseGET("/now_playing"))
-}
-
 /**
  * Requests the list of presets
  *
@@ -1036,8 +1014,4 @@ def boseGetDeviceID() {
  */
 def getDeviceIP() {
     return parent.resolveDNI2Address(device.deviceNetworkId)
-}
-
-def TRACE(text) {
-    log.trace "${text}"
 }

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -0,0 +1,146 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	CentraLite Dimmer
+ *
+ *	Author: SmartThings
+ *	Date: 2013-12-04
+ */
+//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
+metadata {
+	definition (name: "CentraLite Dimmer", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Switch"
+		capability "Power Meter"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Sensor"
+
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+			tileAttribute ("power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'${currentValue} W'
+			}
+		}
+		
+		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		
+		main "switch"
+		details(["switch","refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	log.debug "Parse description $description"
+	def name = null
+	def value = null
+	if (description?.startsWith("catchall:")) {
+		def msg = zigbee.parse(description)
+		log.trace msg
+		log.trace "data: $msg.data"
+	} else if (description?.startsWith("read attr -")) {
+		def descMap = parseDescriptionAsMap(description)
+		log.debug "Read attr: $description"
+		if (descMap.cluster == "0006" && descMap.attrId == "0000") {
+			name = "switch"
+			value = descMap.value.endsWith("01") ? "on" : "off"
+		} else {
+			def reportValue = description.split(",").find {it.split(":")[0].trim() == "value"}?.split(":")[1].trim()
+			name = "power"
+			// assume 16 bit signed for encoding and power divisor is 10
+			value = Integer.parseInt(reportValue, 16) / 10
+		}
+	} else if (description?.startsWith("on/off:")) {
+		log.debug "Switch command"
+		name = "switch"
+		value = description?.endsWith(" 1") ? "on" : "off"
+	}
+
+	def result = createEvent(name: name, value: value)
+	log.debug "Parse returned ${result?.descriptionText}"
+	return result
+}
+
+def parseDescriptionAsMap(description) {
+	(description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+}
+
+// Commands to device
+def on() {
+	'zcl on-off on'
+}
+
+def off() {
+	'zcl on-off off'
+}
+
+def setLevel(value) {
+	log.trace "setLevel($value)"
+	sendEvent(name: "level", value: value)
+    def level = hexString(Math.round(value * 255/100))
+	def cmd = "st cmd 0x${device.deviceNetworkId} 1 8 4 {${level} 2000}"
+	log.debug cmd
+	cmd
+}
+
+def meter() {
+	"st rattr 0x${device.deviceNetworkId} 1 0xB04 0x50B"
+}
+
+def refresh() {
+	"st rattr 0x${device.deviceNetworkId} 1 0xB04 0x50B"
+}
+
+def configure() {
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 1 8 {${device.zigbeeId}} {}", "delay 200",
+		"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0xB04 {${device.zigbeeId}} {}"
+	]
+}
+
+private hex(value, width=2) {
+    def s = new BigInteger(Math.round(value).toString()).toString(16)
+    while (s.size() < width) {
+        s = "0" + s
+    }
+    s
+}

devicetypes/smartthings/cooper-rf9500.src/cooper-rf9500.groovy

@@ -16,7 +16,7 @@ metadata {
 		capability "Switch"
 		capability "Switch Level"
 		capability "Button"
-		capability "Actuator"
+        capability "Actuator"
 
 		//fingerprint deviceId: "0x1200", inClusters: "0x77 0x86 0x75 0x73 0x85 0x72 0xEF", outClusters: "0x26"
 	}
@@ -74,20 +74,20 @@ def off() {
 }
 
 def levelup() {
-	def curlevel = device.currentValue('level') as Integer
+	def curlevel = device.currentValue('level') as Integer 
 	if (curlevel <= 90)
-    	setLevel(curlevel + 10);
+    	setLevel(curlevel + 10);     
 }
 
 def leveldown() {
-	def curlevel = device.currentValue('level') as Integer
+	def curlevel = device.currentValue('level') as Integer 
 	if (curlevel >= 10)
-    	setLevel(curlevel - 10)
+    	setLevel(curlevel - 10)    
 }
 
 def setLevel(value) {
 	log.trace "setLevel($value)"
-	sendEvent(name: "level", value: value)
+	sendEvent(name: "level", value: value) 
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
@@ -106,11 +106,11 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelS
 	if (cmd.upDown == true) {
 		Integer buttonid = 2
         leveldown()
-		checkbuttonEvent(buttonid)
+		checkbuttonEvent(buttonid)		
     } else if (cmd.upDown == false) {
 		Integer buttonid = 3
         levelup()
-		checkbuttonEvent(buttonid)
+		checkbuttonEvent(buttonid)       
 	}
 }
 
@@ -140,12 +140,12 @@ def buttonEvent(button) {
     def result = []
 	if (button == 1) {
     	def mystate = device.currentValue('switch');
-        if (mystate == "on")
+        if (mystate == "on") 
             off()
         else
-            on()
+            on()   
     }
-    updateState("currentButton", "$button")
+    updateState("currentButton", "$button")   
         // update the device state, recording the button press
         result << createEvent(name: "button", value: "pushed", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was pushed", isStateChange: true)
     result
@@ -182,16 +182,3 @@ def updateState(String name, String value) {
 	state[name] = value
 	device.updateDataValue(name, value)
 }
-
-
-def installed() {
-	initialize()
-}
-
-def updated() {
-	initialize()
-}
-
-def initialize() {
-	sendEvent(name: "numberOfButtons", value: 3)
-}

devicetypes/smartthings/cree-bulb.src/README.md

@@ -1,6 +1,6 @@
 # Connected Cree LED Bulb
 
-Cloud Execution
+
 
 Works with: 
 
@@ -23,10 +23,8 @@ Works with:
 
 ## Device Health
 
-Connected Cree LED Bulb with cloud polling it every __5min__
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* __12min__ checkInterval
+A Category C6 Connected Cree LED Bulb with maxReportTime of 5 mins.
+Check-in interval = 12 mins
 
 ## Troubleshooting
 

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -93,19 +93,20 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
 def healthPoll() {
-    log.debug "healthPoll()"
     def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
     cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
 }
 
 def configure() {
     unschedule()
-    runEvery5Minutes("healthPoll")
-    // Device-Watch allows 2 check-in misses from device + ping
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
+    schedule("0 0/5 * * * ? *", "healthPoll")
+    log.debug "Configuring Reporting and Bindings."
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    // minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/dimmer-switch.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/dimmer-switch.src/README.md

@@ -1,47 +0,0 @@
-# Z-wave Dimmer Switch
-
-Local Execution on V2 Hubs
-
-Works with:
-
-* [GE Z-Wave In-Wall Smart Dimmer (GE 12724)](http://products.z-wavealliance.org/products/1197)
-* [GE Z-Wave In-Wall Smart Dimmer (Toggle) (GE 12729)](http://products.z-wavealliance.org/products/1201)
-* [GE Z-Wave Plug-in Smart Dimmer (GE 12718)](http://products.z-wavealliance.org/products/1191)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#Troubleshooting)
-
-## Capabilities
-
-* **Switch Level** - it's defined to accept two parameters, the level and the rate of dimming
-* **Actuator** - represents that a Device has commands
-* **Indicator** - gives you the ability to set the indicator LED light on a Z-Wave switch
-* **Switch** - can detect state (possible values: on/off)
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Z-Wave Smart Dimmers (In-Wall, In-Wall(Toggle), Plug-In) are polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Check-in interval = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [General Z-Wave Dimmer/Switch Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200955890-Troubleshooting-GE-in-wall-switch-or-dimmer-won-t-respond-to-commands-or-automations-Z-Wave-)
-* [GE Z-Wave In-Wall Smart Dimmer (GE 12724) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200902600-GE-In-Wall-Paddle-Dimmer-Switch-GE-12724-Z-Wave-)
-* [GE Z-Wave In-Wall Smart Dimmer (Toggle) (GE 12729) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/207568463-GE-In-Wall-Smart-Toggle-Dimmer-GE-12729-Z-Wave-)
-* [GE Z-Wave Plug-in Smart Dimmer (GE 12718) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202088474-GE-Plug-In-Smart-Dimmer-GE-12718-Z-Wave-)

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Health Check"
 
 		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
 		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
@@ -83,8 +82,6 @@ metadata {
 }
 
 def updated(){
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
   switch (ledIndicator) {
         case "on":
             indicatorWhenOn()
@@ -218,13 +215,6 @@ def poll() {
 	zwave.switchMultilevelV1.switchMultilevelGet().format()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
 	log.debug "refresh() is called"
 	def commands = []
@@ -236,17 +226,17 @@ def refresh() {
 }
 
 void indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on", displayed: false)
+	sendEvent(name: "indicatorStatus", value: "when on", display: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off", displayed: false)
+	sendEvent(name: "indicatorStatus", value: "when off", display: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never", displayed: false)
+	sendEvent(name: "indicatorStatus", value: "never", display: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
 }
 

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -23,7 +23,6 @@ metadata {
 		capability "Sensor"
 		capability "Refresh"
 		capability "Relative Humidity Measurement"
-		capability "Health Check"
 
 		command "generateEvent"
 		command "raiseSetpoint"
@@ -32,14 +31,13 @@ metadata {
 		command "switchMode"
 		command "switchFanMode"
 
-		attribute "thermostatSetpoint", "number"
-		attribute "thermostatStatus", "string"
+		attribute "thermostatSetpoint","number"
+		attribute "thermostatStatus","string"
 		attribute "maxHeatingSetpoint", "number"
 		attribute "minHeatingSetpoint", "number"
 		attribute "maxCoolingSetpoint", "number"
 		attribute "minCoolingSetpoint", "number"
-		attribute "deviceTemperatureUnit", "string"
-		attribute "deviceAlive", "enum", ["true", "false"]
+		attribute "deviceTemperatureUnit", "number"
 	}
 
 	tiles {
@@ -122,21 +120,6 @@ metadata {
 
 }
 
-void installed() {
-    // The device refreshes every 5 minutes by default so if we miss 2 refreshes we can consider it offline
-    // Using 12 minutes because in testing, device health team found that there could be "jitter"
-    sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "cloud"], displayed: false)
-}
-
-// Device Watch will ping the device to proactively determine if the device has gone offline
-// If the device was online the last time we refreshed, trigger another refresh as part of the ping.
-def ping() {
-    def isAlive = device.currentValue("deviceAlive") == "true" ? true : false
-    if (isAlive) {
-        refresh()
-    }
-}
-
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
@@ -165,12 +148,14 @@ def generateEvent(Map results) {
 						 handlerName: name]
 
 			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint" ) {
-				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
+				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
 				isChange = isTemperatureStateChange(device, name, value.toString())
 				isDisplayed = isChange
 				event << [value: sendValue, unit: temperatureScale, isStateChange: isChange, displayed: isDisplayed]
 			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
-				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
+				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
 				event << [value: sendValue, unit: temperatureScale, displayed: false]
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
 				isChange = isStateChange(device, name, value.toString())
@@ -181,11 +166,7 @@ def generateEvent(Map results) {
 			}  else if (name=="humidity") {
 				isChange = isStateChange(device, name, value.toString())
 				event << [value: value.toString(), isStateChange: isChange, displayed: false, unit: "%"]
-			} else if (name == "deviceAlive") {
-				isChange = isStateChange(device, name, value.toString())
-				event['isStateChange'] = isChange
-				event['displayed'] = false
-			} else {
+			}  else {
 				isChange = isStateChange(device, name, value.toString())
 				isDisplayed = isChange
 				event << [value: value.toString(), isStateChange: isChange, displayed: isDisplayed]
@@ -272,6 +253,7 @@ void setCoolingSetpoint(setpoint) {
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
+
 	if (coolingSetpoint > maxCoolingSetpoint) {
 		coolingSetpoint = maxCoolingSetpoint
 	} else if (coolingSetpoint < minCoolingSetpoint) {
@@ -301,6 +283,7 @@ void setCoolingSetpoint(setpoint) {
 }
 
 void resumeProgram() {
+
 	log.debug "resumeProgram() is called"
 	sendEvent("name":"thermostatStatus", "value":"resuming schedule", "description":statusText, displayed: false)
 	def deviceId = device.deviceNetworkId.split(/\./).last()
@@ -371,6 +354,7 @@ def switchFanMode() {
 }
 
 def switchToFanMode(nextMode) {
+
 	log.debug "switching to fan mode: $nextMode"
 	def returnCommand
 
@@ -536,56 +520,63 @@ def fanAuto() {
 }
 
 def generateSetpointEvent() {
+
 	log.debug "Generate SetPoint Event"
 
 	def mode = device.currentValue("thermostatMode")
+	log.debug "Current Mode = ${mode}"
 
 	def heatingSetpoint = device.currentValue("heatingSetpoint")
+	log.debug "Heating Setpoint = ${heatingSetpoint}"
+
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
+	log.debug "Cooling Setpoint = ${coolingSetpoint}"
+
 	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
-	if(location.temperatureScale == "C") {
-		maxHeatingSetpoint = maxHeatingSetpoint > 40 ? roundC(convertFtoC(maxHeatingSetpoint)) : roundC(maxHeatingSetpoint)
-		maxCoolingSetpoint = maxCoolingSetpoint > 40 ? roundC(convertFtoC(maxCoolingSetpoint)) : roundC(maxCoolingSetpoint)
-		minHeatingSetpoint = minHeatingSetpoint > 40 ? roundC(convertFtoC(minHeatingSetpoint)) : roundC(minHeatingSetpoint)
-		minCoolingSetpoint = minCoolingSetpoint > 40 ? roundC(convertFtoC(minCoolingSetpoint)) : roundC(minCoolingSetpoint)
-		heatingSetpoint = heatingSetpoint > 40 ? roundC(convertFtoC(heatingSetpoint)) : roundC(heatingSetpoint)
-		coolingSetpoint = coolingSetpoint > 40 ? roundC(convertFtoC(coolingSetpoint)) : roundC(coolingSetpoint)
-	} else {
-		maxHeatingSetpoint = maxHeatingSetpoint < 40 ? roundC(convertCtoF(maxHeatingSetpoint)) : maxHeatingSetpoint
-		maxCoolingSetpoint = maxCoolingSetpoint < 40 ? roundC(convertCtoF(maxCoolingSetpoint)) : maxCoolingSetpoint
-		minHeatingSetpoint = minHeatingSetpoint < 40 ? roundC(convertCtoF(minHeatingSetpoint)) : minHeatingSetpoint
-		minCoolingSetpoint = minCoolingSetpoint < 40 ? roundC(convertCtoF(minCoolingSetpoint)) : minCoolingSetpoint
-		heatingSetpoint = heatingSetpoint < 40 ? roundC(convertCtoF(heatingSetpoint)) : heatingSetpoint
-		coolingSetpoint = coolingSetpoint < 40 ? roundC(convertCtoF(coolingSetpoint)) : coolingSetpoint
+	if(location.temperatureScale == "C")
+	{
+		maxHeatingSetpoint = roundC(maxHeatingSetpoint)
+		maxCoolingSetpoint = roundC(maxCoolingSetpoint)
+		minHeatingSetpoint = roundC(minHeatingSetpoint)
+		minCoolingSetpoint = roundC(minCoolingSetpoint)
+		heatingSetpoint = roundC(heatingSetpoint)
+		coolingSetpoint = roundC(coolingSetpoint)
 	}
 
-	log.debug "Current Mode = ${mode}"
-	log.debug "Heating Setpoint = ${heatingSetpoint}"
-	log.debug "Cooling Setpoint = ${coolingSetpoint}"
 
 	sendEvent("name":"maxHeatingSetpoint", "value":maxHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"maxCoolingSetpoint", "value":maxCoolingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minHeatingSetpoint", "value":minHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minCoolingSetpoint", "value":minCoolingSetpoint, "unit":location.temperatureScale)
-	sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
-	sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
+
 
 	if (mode == "heat") {
+
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+
 	}
 	else if (mode == "cool") {
+
 		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
+
 	} else if (mode == "auto") {
+
 		sendEvent("name":"thermostatSetpoint", "value":"Auto")
+
 	} else if (mode == "off") {
+
 		sendEvent("name":"thermostatSetpoint", "value":"Off")
+
 	} else if (mode == "auxHeatOnly") {
+
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+
 	}
+
 }
 
 void raiseSetpoint() {
@@ -594,31 +585,21 @@ void raiseSetpoint() {
 	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 
+
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow raiseSetpoint"
 	} else {
-
 		def heatingSetpoint = device.currentValue("heatingSetpoint")
 		def coolingSetpoint = device.currentValue("coolingSetpoint")
 		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
-
-		if (location.temperatureScale == "C") {
-			maxHeatingSetpoint = maxHeatingSetpoint > 40 ? convertFtoC(maxHeatingSetpoint) : maxHeatingSetpoint
-			maxCoolingSetpoint = maxCoolingSetpoint > 40 ? convertFtoC(maxCoolingSetpoint) : maxCoolingSetpoint
-			heatingSetpoint = heatingSetpoint > 40 ? convertFtoC(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint > 40 ? convertFtoC(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint > 40 ? convertFtoC(thermostatSetpoint) : thermostatSetpoint
-		} else {
-			maxHeatingSetpoint = maxHeatingSetpoint < 40 ? convertCtoF(maxHeatingSetpoint) : maxHeatingSetpoint
-			maxCoolingSetpoint = maxCoolingSetpoint < 40 ? convertCtoF(maxCoolingSetpoint) : maxCoolingSetpoint
-			heatingSetpoint = heatingSetpoint < 40 ? convertCtoF(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint < 40 ? convertCtoF(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint < 40 ? convertCtoF(thermostatSetpoint) : thermostatSetpoint
-		}
-
 		log.debug "raiseSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
 
-		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
+		if (device.latestState('thermostatSetpoint')) {
+			targetvalue = device.latestState('thermostatSetpoint').value
+			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
+		} else {
+			targetvalue = 0
+		}
 		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
 		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue > maxHeatingSetpoint) {
@@ -641,29 +622,20 @@ void lowerSetpoint() {
 	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
+
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow lowerSetpoint"
 	} else {
 		def heatingSetpoint = device.currentValue("heatingSetpoint")
 		def coolingSetpoint = device.currentValue("coolingSetpoint")
 		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
-
-		if (location.temperatureScale == "C") {
-			minHeatingSetpoint = minHeatingSetpoint > 40 ? convertFtoC(minHeatingSetpoint) : minHeatingSetpoint
-			minCoolingSetpoint = minCoolingSetpoint > 40 ? convertFtoC(minCoolingSetpoint) : minCoolingSetpoint
-			heatingSetpoint = heatingSetpoint > 40 ? convertFtoC(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint > 40 ? convertFtoC(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint > 40 ? convertFtoC(thermostatSetpoint) : thermostatSetpoint
-		} else {
-			minHeatingSetpoint = minHeatingSetpoint < 40 ? convertCtoF(minHeatingSetpoint) : minHeatingSetpoint
-			minCoolingSetpoint = minCoolingSetpoint < 40 ? convertCtoF(minCoolingSetpoint) : minCoolingSetpoint
-			heatingSetpoint = heatingSetpoint < 40 ? convertCtoF(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint < 40 ? convertCtoF(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint < 40 ? convertCtoF(thermostatSetpoint) : thermostatSetpoint
-		}
 		log.debug "lowerSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
-
-		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
+		if (device.latestState('thermostatSetpoint')) {
+			targetvalue = device.latestState('thermostatSetpoint').value
+			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
+		} else {
+			targetvalue = 0
+		}
 		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
 		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue < minHeatingSetpoint) {
@@ -681,83 +653,66 @@ void lowerSetpoint() {
 
 //called by raiseSetpoint() and lowerSetpoint()
 void alterSetpoint(temp) {
+
 	def mode = device.currentValue("thermostatMode")
+	def heatingSetpoint = device.currentValue("heatingSetpoint")
+	def coolingSetpoint = device.currentValue("coolingSetpoint")
+	def deviceId = device.deviceNetworkId.split(/\./).last()
 
-	if (mode == "off" || mode == "auto") {
-		log.warn "this mode: $mode does not allow alterSetpoint"
-	} else {
-		def heatingSetpoint = device.currentValue("heatingSetpoint")
-		def coolingSetpoint = device.currentValue("coolingSetpoint")
-		def deviceId = device.deviceNetworkId.split(/\./).last()
+	def targetHeatingSetpoint
+	def targetCoolingSetpoint
 
-		def targetHeatingSetpoint
-		def targetCoolingSetpoint
-
-		def temperatureScaleHasChanged = false
-
-		if (location.temperatureScale == "C") {
-			if ( heatingSetpoint > 40.0 || coolingSetpoint > 40.0 ) {
-				temperatureScaleHasChanged = true
-			}
+	//step1: check thermostatMode, enforce limits before sending request to cloud
+	if (mode == "heat" || mode == "auxHeatOnly"){
+		if (temp.value > coolingSetpoint){
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = temp.value
 		} else {
-			if ( heatingSetpoint < 40.0 || coolingSetpoint < 40.0 ) {
-				temperatureScaleHasChanged = true
-			}
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = coolingSetpoint
 		}
-
-		//step1: check thermostatMode, enforce limits before sending request to cloud
-		if (mode == "heat" || mode == "auxHeatOnly"){
-			if (temp.value > coolingSetpoint){
-				targetHeatingSetpoint = temp.value
-				targetCoolingSetpoint = temp.value
-			} else {
-				targetHeatingSetpoint = temp.value
-				targetCoolingSetpoint = coolingSetpoint
-			}
-		} else if (mode == "cool") {
-			//enforce limits before sending request to cloud
-			if (temp.value < heatingSetpoint){
-				targetHeatingSetpoint = temp.value
-				targetCoolingSetpoint = temp.value
-			} else {
-				targetHeatingSetpoint = heatingSetpoint
-				targetCoolingSetpoint = temp.value
-			}
-		}
-
-		log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
-				"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
-
-		def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-
-		def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
-		def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
-
-		if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
-			sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
-			sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
-			sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
-			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+	} else if (mode == "cool") {
+		//enforce limits before sending request to cloud
+		if (temp.value < heatingSetpoint){
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = temp.value
 		} else {
-			log.error "Error alterSetpoint()"
-			if (mode == "heat" || mode == "auxHeatOnly"){
-				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
-			} else if (mode == "cool") {
-				sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
-			}
+			targetHeatingSetpoint = heatingSetpoint
+			targetCoolingSetpoint = temp.value
 		}
-
-		if ( temperatureScaleHasChanged )
-			generateSetpointEvent()
-		generateStatusEvent()
 	}
+
+	log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
+			"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
+
+	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+
+	def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
+	def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
+
+	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
+		sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
+		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
+		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
+		log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+	} else {
+		log.error "Error alterSetpoint()"
+		if (mode == "heat" || mode == "auxHeatOnly"){
+			sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+		} else if (mode == "cool") {
+			sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+		}
+	}
+	generateStatusEvent()
 }
 
 def generateStatusEvent() {
+
 	def mode = device.currentValue("thermostatMode")
 	def heatingSetpoint = device.currentValue("heatingSetpoint")
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
 	def temperature = device.currentValue("temperature")
+
 	def statusText
 
 	log.debug "Generate Status Event for Mode = ${mode}"
@@ -767,25 +722,36 @@ def generateStatusEvent() {
 	log.debug "HVAC Mode = ${mode}"
 
 	if (mode == "heat") {
+
 		if (temperature >= heatingSetpoint)
 			statusText = "Right Now: Idle"
 		else
 			statusText = "Heating to ${heatingSetpoint} ${location.temperatureScale}"
+
 	} else if (mode == "cool") {
+
 		if (temperature <= coolingSetpoint)
 			statusText = "Right Now: Idle"
 		else
 			statusText = "Cooling to ${coolingSetpoint} ${location.temperatureScale}"
-	} else if (mode == "auto") {
-		statusText = "Right Now: Auto"
-	} else if (mode == "off") {
-		statusText = "Right Now: Off"
-	} else if (mode == "auxHeatOnly") {
-		statusText = "Emergency Heat"
-	} else {
-		statusText = "?"
-	}
 
+	} else if (mode == "auto") {
+
+		statusText = "Right Now: Auto"
+
+	} else if (mode == "off") {
+
+		statusText = "Right Now: Off"
+
+	} else if (mode == "auxHeatOnly") {
+
+		statusText = "Emergency Heat"
+
+	} else {
+
+		statusText = "?"
+
+	}
 	log.debug "Generate Status Event = ${statusText}"
 	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
 }
@@ -799,7 +765,7 @@ def roundC (tempC) {
 }
 
 def convertFtoC (tempF) {
-	return ((Math.round(((tempF - 32)*(5/9)) * 2))/2).toDouble()
+	return String.format("%.1f", (Math.round(((tempF - 32)*(5/9)) * 2))/2)
 }
 
 def convertCtoF (tempC) {

devicetypes/smartthings/fibaro-rgbw-controller.src/fibaro-rgbw-controller.groovy

@@ -29,10 +29,10 @@
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Configuration"
+		capability "Configuration" 
 		capability "Color Control"
         capability "Power Meter"
-
+       
         command "getDeviceData"
         command "softwhite"
         command "daylight"
@@ -54,12 +54,12 @@
         command "setAdjustedColor"
         command "setWhiteLevel"
         command "test"
-
+        
         attribute "whiteLevel", "string"
-
+      
 		fingerprint deviceId: "0x1101", inClusters: "0x27,0x72,0x86,0x26,0x60,0x70,0x32,0x31,0x85,0x33"
 	}
-
+    
     simulator {
     	status "on":  "command: 2003, payload: FF"
     	status "off": "command: 2003, payload: 00"
@@ -84,7 +84,7 @@
 		}
 		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
 			state "level", action:"switch level.setLevel"
-		}
+		}     
 		controlTile("whiteSliderControl", "device.whiteLevel", "slider", height: 1, width: 3, inactiveLabel: false) {
             state "whiteLevel", action:"setWhiteLevel", label:'White Level'
         }
@@ -183,24 +183,24 @@
 		valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
 			state "hue", label: 'Hue ${currentValue}   '
 		}
-
+        
         main(["switch"])
-        details(["switch",
-                 "levelSliderControl",
-                 "rgbSelector",
-                 "whiteSliderControl",
+        details(["switch", 
+                 "levelSliderControl", 
+                 "rgbSelector", 
+                 "whiteSliderControl", 
                  /*"softwhite",
                  "daylight",
                  "warmwhite",
-                 "red",
-                 "green",
+                 "red", 
+                 "green", 
                  "blue",
                  "white",
                  "cyan",
                  "magenta",
                  "orange",
                  "purple",
-                 "yellow",
+                 "yellow",                 
                  "fireplace",
                  "storm",
                  "deepfade",
@@ -214,7 +214,7 @@
 
 def setAdjustedColor(value) {
 	log.debug "setAdjustedColor: ${value}"
-
+    
     toggleTiles("off") //turn off the hard color tiles
 
     def level = device.latestValue("level")
@@ -223,19 +223,19 @@ def setAdjustedColor(value) {
     log.debug "level is: ${level}"
     value.level = level
 
-	def c = hexToRgb(value.hex)
+	def c = hexToRgb(value.hex) 
 	value.rh = hex(c.r * (level/100))
 	value.gh = hex(c.g * (level/100))
 	value.bh = hex(c.b * (level/100))
-
-    setColor(value)
+	
+    setColor(value)  
 }
 
 def setColor(value) {
 	log.debug "setColor: ${value}"
     log.debug "hue is: ${value.hue}"
     log.debug "saturation is: ${value.saturation}"
-
+    
     if (value.size() < 8)
     	toggleTiles("off")
 
@@ -246,22 +246,22 @@ def setColor(value) {
         value.gh = hex(rgb.g)
         value.bh = hex(rgb.b)
     }
-
+    
     if ((value.size() == 3) && (value.hue != null) && (value.saturation != null) && (value.level)) { //user passed in a level value too from outside (App)
     	def rgb = hslToRGB(value.hue, value.saturation, 0.5)
         value.hex = rgbToHex(rgb)
         value.rh = hex(rgb.r * value.level/100)
         value.gh = hex(rgb.g * value.level/100)
-        value.bh = hex(rgb.b * value.level/100)
+        value.bh = hex(rgb.b * value.level/100)       
     }
-
+    
     if (( value.size() == 1) && (value.hex)) { //being called from outside of device (App) with only hex
 		def rgbInt = hexToRgb(value.hex)
         value.rh = hex(rgbInt.r)
         value.gh = hex(rgbInt.g)
         value.bh = hex(rgbInt.b)
     }
-
+    
     if (( value.size() == 2) && (value.hex) && (value.level)) { //being called from outside of device (App) with only hex and level
 
         def rgbInt = hexToRgb(value.hex)
@@ -269,7 +269,7 @@ def setColor(value) {
         value.gh = hex(rgbInt.g * value.level/100)
         value.bh = hex(rgbInt.b * value.level/100)
     }
-
+    
     if (( value.size() == 1) && (value.colorName)) { //being called from outside of device (App) with only color name
         def colorData = getColorData(value.colorName)
         value.rh = colorData.rh
@@ -277,7 +277,7 @@ def setColor(value) {
         value.bh = colorData.bh
         value.hex = "#${value.rh}${value.gh}${value.bh}"
     }
-
+    
     if (( value.size() == 2) && (value.colorName) && (value.level)) { //being called from outside of device (App) with only color name and level
 		def colorData = getColorData(value.colorName)
         value.rh = hex(colorData.r * value.level/100)
@@ -285,7 +285,7 @@ def setColor(value) {
         value.bh = hex(colorData.b * value.level/100)
         value.hex = "#${hex(colorData.r)}${hex(colorData.g)}${hex(colorData.b)}"
     }
-
+    
     if (( value.size() == 3) && (value.red != null) && (value.green != null) && (value.blue != null)) { //being called from outside of device (App) with only color values (0-255)
         value.rh = hex(value.red)
         value.gh = hex(value.green)
@@ -299,7 +299,7 @@ def setColor(value) {
         value.bh = hex(value.blue * value.level/100)
         value.hex = "#${hex(value.red)}${hex(value.green)}${hex(value.blue)}"
     }
-
+    
 	sendEvent(name: "hue", value: value.hue, displayed: false)
 	sendEvent(name: "saturation", value: value.saturation, displayed: false)
 	sendEvent(name: "color", value: value.hex, displayed: false)
@@ -309,26 +309,26 @@ def setColor(value) {
 	if (value.switch) {
 		sendEvent(name: "switch", value: value.switch)
 	}
-
+	   
     sendRGB(value.rh, value.gh, value.bh)
 }
 
 def setLevel(level) {
 	log.debug "setLevel($level)"
-
+    
 	if (level == 0) { off() }
 	else if (device.latestValue("switch") == "off") { on() }
-
+    
     def colorHex = device.latestValue("color")
     if (colorHex == null)
 		colorHex = "#FFFFFF"
-
+        
     def c = hexToRgb(colorHex)
-
+    
     def r = hex(c.r * (level/100))
     def g = hex(c.g * (level/100))
     def b = hex(c.b * (level/100))
-
+    
 	sendEvent(name: "level", value: level)
     sendEvent(name: "setLevel", value: level, displayed: false)
 	sendRGB(r, g, b)
@@ -337,14 +337,14 @@ def setLevel(level) {
 
 def setWhiteLevel(value) {
 	log.debug "setWhiteLevel: ${value}"
-    def level = Math.min(value as Integer, 99)
+    def level = Math.min(value as Integer, 99)    
     level = 255 * level/99 as Integer
     def channel = 0
 
 	if (device.latestValue("switch") == "off") { on() }
-
+    
     sendEvent(name: "whiteLevel", value: value)
-    sendWhite(channel, value)
+    sendWhite(channel, value)       
 }
 
 def sendWhite(channel, value) {
@@ -367,20 +367,20 @@ def sendRGBW(redHex, greenHex, blueHex, whiteHex) {
 
 def configure() {
 	log.debug "Configuring Device For SmartThings Use"
+    
 
-
-
+    
     def cmds = []
-
+    
     // send associate to group 3 to get sensor data reported only to hub
     cmds << zwave.associationV2.associationSet(groupingIdentifier:5, nodeId:[zwaveHubNodeId]).format()
-
-
+    
+    
     //cmds << sendEvent(name: "level", value: 50)
     //cmds << on()
     //cmds << doColorButton("Green")
     delayBetween(cmds, 500)
-
+    
 }
 
 def parse(String description) {
@@ -411,11 +411,11 @@ def parse(String description) {
 
 def getDeviceData() {
     def cmd = []
-
-    cmd << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+    
+    cmd << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet()) 
     cmd << response(zwave.versionV1.versionGet())
 	cmd << response(zwave.firmwareUpdateMdV1.firmwareMdGet())
-
+    
     delayBetween(cmd, 500)
 }
 
@@ -426,7 +426,7 @@ def createEvent(physicalgraph.zwave.commands.manufacturerspecificv2.Manufacturer
     log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map item1) {
+def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map item1) {	
     updateDataValue("applicationVersion", "${cmd.applicationVersion}")
     log.debug "applicationVersion:      ${cmd.applicationVersion}"
     log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
@@ -435,13 +435,13 @@ def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map it
     log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
 }
 
-def createEvent(physicalgraph.zwave.commands.firmwareupdatemdv1.FirmwareMdReport cmd, Map item1) {
+def createEvent(physicalgraph.zwave.commands.firmwareupdatemdv1.FirmwareMdReport cmd, Map item1) { 
     log.debug "checksum:       ${cmd.checksum}"
     log.debug "firmwareId:     ${cmd.firmwareId}"
     log.debug "manufacturerId: ${cmd.manufacturerId}"
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.colorcontrolv1.CapabilityReport cmd, Map item1) {
+def zwaveEvent(physicalgraph.zwave.commands.colorcontrolv1.CapabilityReport cmd, Map item1) { 
 
 	log.debug "In CapabilityReport"
 }
@@ -546,7 +546,7 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport
      def value = "when off"
      if (cmd.configurationValue[0] == 1) {value = "when on"}
      if (cmd.configurationValue[0] == 2) {value = "never"}
-     [name: "indicatorStatus", value: value, displayed: false]
+     [name: "indicatorStatus", value: value, display: false]
 }
 */
 def createEvent(physicalgraph.zwave.Command cmd,  Map map) {
@@ -557,7 +557,7 @@ def createEvent(physicalgraph.zwave.Command cmd,  Map map) {
 def on() {
 	log.debug "on()"
 	sendEvent(name: "switch", value: "on")
-	delayBetween([zwave.basicV1.basicSet(value: 0xFF).format(),
+	delayBetween([zwave.basicV1.basicSet(value: 0xFF).format(), 
     			  zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
 }
 
@@ -593,7 +593,7 @@ def refresh() {
  * @return none
  */
 def updateZwaveParam(params) {
-	if ( params ) {
+	if ( params ) {   
         def pNumber = params.paramNumber
         def pSize	= params.size
         def pValue	= [params.value]
@@ -601,9 +601,9 @@ def updateZwaveParam(params) {
 
 		def cmds = []
         cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
-
+        
         cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
-        delayBetween(cmds, 1500)
+        delayBetween(cmds, 1500)        
     }
 }
 
@@ -612,22 +612,22 @@ def test() {
     //value = [hue: 0, saturation: 100, level: 5]
     //value = [red: 255, green: 0, blue: 255, level: 60]
 	//setColor(value)
-
+    
     def cmd = []
-
+    
     if ( !state.cnt ) {
     	state.cnt = 6
     } else {
     	state.cnt = state.cnt + 1
     }
-
+    
     if ( state.cnt > 10 )
     	state.cnt = 6
-
+    
     // run programmed light show
 	cmd << zwave.configurationV1.configurationSet(configurationValue: [state.cnt], parameterNumber: 72, size: 1).format()
-    cmd << zwave.configurationV1.configurationGet(parameterNumber: 72).format()
-
+    cmd << zwave.configurationV1.configurationGet(parameterNumber: 72).format()  
+    
     delayBetween(cmd, 500)
 
 }
@@ -638,23 +638,23 @@ def colorNameToRgb(color) {
         [name:"Soft White",	r: 255, g: 241, b: 224	],
         [name:"Daylight", 	r: 255, g: 255, b: 251	],
         [name:"Warm White", r: 255, g: 244, b: 229	],
-
+        
         [name:"Red", 		r: 255, g: 0,	b: 0	],
 		[name:"Green", 		r: 0, 	g: 255,	b: 0	],
         [name:"Blue", 		r: 0, 	g: 0,	b: 255	],
-
+        
 		[name:"Cyan", 		r: 0, 	g: 255,	b: 255	],
-        [name:"Magenta", 	r: 255, g: 0,	b: 33	],
+        [name:"Magenta", 	r: 255, g: 0,	b: 33	],       
         [name:"Orange", 	r: 255, g: 102, b: 0	],
-
+        
         [name:"Purple", 	r: 170, g: 0,	b: 255	],
 		[name:"Yellow", 	r: 255, g: 255, b: 0	],
         [name:"White", 		r: 255, g: 255, b: 255	]
 	]
-
-    def colorData = [:]
+    
+    def colorData = [:]    
     colorData = colors.find { it.name == color }
-
+    
     colorData
 }
 
@@ -670,7 +670,7 @@ def hexToRgb(colorHex) {
 	def rrInt = Integer.parseInt(colorHex.substring(1,3),16)
     def ggInt = Integer.parseInt(colorHex.substring(3,5),16)
     def bbInt = Integer.parseInt(colorHex.substring(5,7),16)
-
+    
     def colorData = [:]
     colorData = [r: rrInt, g: ggInt, b: bbInt]
     colorData
@@ -681,7 +681,7 @@ def rgbToHex(rgb) {
     def g = hex(rgb.g)
     def b = hex(rgb.b)
     def hexColor = "#${r}${g}${b}"
-
+    
     hexColor
 }
 
@@ -689,11 +689,11 @@ def hslToRGB(float var_h, float var_s, float var_l) {
 	float h = var_h / 100
     float s = var_s / 100
     float l = var_l
-
+    
     def r = 0
     def g = 0
     def b = 0
-
+    
 	if (s == 0) {
     	r = l * 255
         g = l * 255
@@ -705,26 +705,26 @@ def hslToRGB(float var_h, float var_s, float var_l) {
         } else {
         	var_2 = (l + s) - (s * l)
         }
-
+                
         float var_1 = 2 * l - var_2
-
+        
         r = 255 * hueToRgb(var_1, var_2, h + (1 / 3))
         g = 255 * hueToRgb(var_1, var_2, h)
-        b = 255 * hueToRgb(var_1, var_2, h - (1 / 3))
+        b = 255 * hueToRgb(var_1, var_2, h - (1 / 3))    
     }
-
+    
     def rgb = [:]
     rgb = [r: r, g: g, b: b]
 
-    rgb
+    rgb 
 }
 
 def hueToRgb(v1, v2, vh) {
-	if (vh < 0) { vh += 1 }
+	if (vh < 0) { vh += 1 }            
 	if (vh > 1) { vh -= 1 }
 	if ((6 * vh) < 1) { return (v1 + (v2 - v1) * 6 * vh) }
     if ((2 * vh) < 1) { return (v2) }
-    if ((3 * vh) < 2) { return (v1 + (v2 - $v1) * ((2 / 3 - vh) * 6)) }
+    if ((3 * vh) < 2) { return (v1 + (v2 - $v1) * ((2 / 3 - vh) * 6)) }    
     return (v1)
 }
 
@@ -735,49 +735,49 @@ def rgbToHSL(rgb) {
     def h = 0
     def s = 0
     def l = 0
-
+    
     def var_min = [r,g,b].min()
     def var_max = [r,g,b].max()
     def del_max = var_max - var_min
-
+    
     l = (var_max + var_min) / 2
-
+    
     if (del_max == 0) {
             h = 0
             s = 0
     } else {
-    	if (l < 0.5) { s = del_max / (var_max + var_min) }
+    	if (l < 0.5) { s = del_max / (var_max + var_min) } 
         else { s = del_max / (2 - var_max - var_min) }
 
         def del_r = (((var_max - r) / 6) + (del_max / 2)) / del_max
         def del_g = (((var_max - g) / 6) + (del_max / 2)) / del_max
         def del_b = (((var_max - b) / 6) + (del_max / 2)) / del_max
 
-        if (r == var_max) { h = del_b - del_g }
-        else if (g == var_max) { h = (1 / 3) + del_r - del_b }
+        if (r == var_max) { h = del_b - del_g } 
+        else if (g == var_max) { h = (1 / 3) + del_r - del_b } 
         else if (b == var_max) { h = (2 / 3) + del_g - del_r }
-
+        
 		if (h < 0) { h += 1 }
         if (h > 1) { h -= 1 }
 	}
-    def hsl = [:]
+    def hsl = [:]    
     hsl = [h: h * 100, s: s * 100, l: l]
-
+    
     hsl
 }
 
 def getColorData(colorName) {
 	log.debug "getColorData: ${colorName}"
-
+    
     def colorRGB = colorNameToRgb(colorName)
     def colorHex = rgbToHex(colorRGB)
 	def colorHSL = rgbToHSL(colorRGB)
-
+        
     def colorData = [:]
-    colorData = [h: colorHSL.h,
-    			 s: colorHSL.s,
-                 l: device.latestValue("level"),
-                 r: colorRGB.r,
+    colorData = [h: colorHSL.h, 
+    			 s: colorHSL.s, 
+                 l: device.latestValue("level"), 
+                 r: colorRGB.r, 
                  g: colorRGB.g,
                  b: colorRGB.b,
                  rh: hex(colorRGB.r),
@@ -785,8 +785,8 @@ def getColorData(colorName) {
                  bh: hex(colorRGB.b),
                  hex: colorHex,
                  alpha: 1]
-
-     colorData
+     
+     colorData                 
 }
 
 def doColorButton(colorName) {
@@ -798,7 +798,7 @@ def doColorButton(colorName) {
     def maxLevel = hex(99)
 
     toggleTiles(colorName.toLowerCase().replaceAll("\\s",""))
-
+    
     if 		( colorName == "Fire Place" ) 	{ updateZwaveParam([paramNumber:72, value:6,  size:1]) }
 	else if ( colorName == "Storm" ) 		{ updateZwaveParam([paramNumber:72, value:7,  size:1]) }
     else if ( colorName == "Deep Fade" ) 	{ updateZwaveParam([paramNumber:72, value:8,  size:1]) }
@@ -808,8 +808,8 @@ def doColorButton(colorName) {
     else if ( colorName == "Daylight" ) 	{ String.format("33050400${maxLevel}02${maxLevel}03${maxLevel}04${maxLevel}%02X", 100) }
     else {
 		def c = getColorData(colorName)
-		def newValue = ["hue": c.h, "saturation": c.s, "level": level, "red": c.r, "green": c.g, "blue": c.b, "hex": c.hex, "alpha": c.alpha]
-    	setColor(newValue)
+		def newValue = ["hue": c.h, "saturation": c.s, "level": level, "red": c.r, "green": c.g, "blue": c.b, "hex": c.hex, "alpha": c.alpha]  
+    	setColor(newValue)            
     	def r = hex(c.r * (level/100))
     	def g = hex(c.g * (level/100))
     	def b = hex(c.b * (level/100))
@@ -823,19 +823,19 @@ def toggleTiles(color) {
 	if ( !state.colorTiles ) {
     	state.colorTiles = ["softwhite","daylight","warmwhite","red","green","blue","cyan","magenta","orange","purple","yellow","white","fireplace","storm","deepfade","litefade","police"]
     }
-
+    
     def cmds = []
-
+    
     state.colorTiles.each({
     	if ( it == color ) {
         	log.debug "Turning ${it} on"
-            cmds << sendEvent(name: it, value: "on${it}", displayed: True, descriptionText: "${device.displayName} ${color} is 'ON'", isStateChange: true)
+            cmds << sendEvent(name: it, value: "on${it}", display: True, descriptionText: "${device.displayName} ${color} is 'ON'", isStateChange: true)
         } else {
         	//log.debug "Turning ${it} off"
         	cmds << sendEvent(name: it, value: "off${it}", displayed: false)
         }
     })
-
+    
     delayBetween(cmds, 2500)
 }
 

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -87,7 +87,7 @@ metadata {
 def parse(String description) {
     def resultMap = zigbee.getEvent(description)
     if (resultMap) {
-        if (resultMap.name != "level" || resultMap.value != 0) {  // Ignore level reports of 0 sent when bulb turns off
+        if ((resultMap.name == "level" && state.trigger == "setLevel") || resultMap.name != "level") {  //doing this to account for weird level reporting bug with GE Link Bulbs
             sendEvent(resultMap)
         }
     }
@@ -188,10 +188,12 @@ def updated() {
 }
 
 def on() {
+    state.trigger = "on/off"
     zigbee.on()
 }
 
 def off() {
+    state.trigger = "on/off"
     zigbee.off()
 }
 
@@ -204,6 +206,7 @@ def refresh() {
 }
 
 def setLevel(value) {
+    state.trigger = "setLevel"
     def cmd
     def delayForRefresh = 500
     if (dimRate && (state?.rate != null)) {

devicetypes/smartthings/ge-zigbee-dimmer.src/ge-zigbee-dimmer.groovy

@@ -0,0 +1,351 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	    GE/Jasco ZigBee Dimmer
+ *
+ *	Author: SmartThings
+ *	Date: 2015-07-01
+ */
+
+metadata {
+	definition (name: "GE ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch"
+		capability "Switch Level"
+		capability "Power Meter"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Actuator"
+		capability "Sensor"
+
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+		}
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "level", label: 'Level ${currentValue}%'
+		}
+		valueTile("power", "device.power", decoration: "flat", width: 2, height: 2) {
+			state "power", label:'${currentValue} W'
+		}
+		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		main "switch"
+		details(["switch", "level", "power","levelSliderControl","refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	log.debug "description is $description"
+
+	def finalResult = isKnownDescription(description)
+	if (finalResult != "false") {
+		log.info finalResult
+		if (finalResult.type == "update") {
+			log.info "$device updates: ${finalResult.value}"
+		}
+		else if (finalResult.type == "power") {
+			def powerValue = (finalResult.value as Integer)/10
+			sendEvent(name: "power", value: powerValue)
+
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/
+		}
+		else {
+			sendEvent(name: finalResult.type, value: finalResult.value)
+		}
+	}
+	else {
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug parseDescriptionAsMap(description)
+	}
+}
+
+// Commands to device
+def zigbeeCommand(cluster, attribute){
+	["st cmd 0x${device.deviceNetworkId} ${endpointId} ${cluster} ${attribute} {}"]
+}
+
+def off() {
+	zigbeeCommand("6", "0")
+}
+
+def on() {
+	zigbeeCommand("6", "1")
+}
+
+def setLevel(value) {
+	value = value as Integer
+	if (value == 0) {
+		off()
+	}
+	else {
+		sendEvent(name: "level", value: value)
+		setLevelWithRate(value, "0000") + ["delay 1000"] + on()	//value is between 0 to 100; GE does NOT switch on if OFF
+	}
+}
+
+def refresh() {
+	[
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0702 0x0400", "delay 500"
+	]
+
+}
+
+def configure() {
+	onOffConfig() + levelConfig() + powerConfig() + refresh()
+}
+
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+//Need to reverse array of size 2
+private byte[] reverseArray(byte[] array) {
+	byte tmp;
+	tmp = array[1];
+	array[1] = array[0];
+	array[0] = tmp;
+	return array
+}
+
+def parseDescriptionAsMap(description) {
+	if (description?.startsWith("read attr -")) {
+		(description - "read attr - ").split(",").inject([:]) { map, param ->
+			def nameAndValue = param.split(":")
+			map += [(nameAndValue[0].trim()): nameAndValue[1].trim()]
+		}
+	}
+	else if (description?.startsWith("catchall: ")) {
+		def seg = (description - "catchall: ").split(" ")
+		def zigbeeMap = [:]
+		zigbeeMap += [raw: (description - "catchall: ")]
+		zigbeeMap += [profileId: seg[0]]
+		zigbeeMap += [clusterId: seg[1]]
+		zigbeeMap += [sourceEndpoint: seg[2]]
+		zigbeeMap += [destinationEndpoint: seg[3]]
+		zigbeeMap += [options: seg[4]]
+		zigbeeMap += [messageType: seg[5]]
+		zigbeeMap += [dni: seg[6]]
+		zigbeeMap += [isClusterSpecific: Short.valueOf(seg[7], 16) != 0]
+		zigbeeMap += [isManufacturerSpecific: Short.valueOf(seg[8], 16) != 0]
+		zigbeeMap += [manufacturerId: seg[9]]
+		zigbeeMap += [command: seg[10]]
+		zigbeeMap += [direction: seg[11]]
+		zigbeeMap += [data: seg.size() > 12 ? seg[12].split("").findAll { it }.collate(2).collect {
+			it.join('')
+		} : []]
+
+		zigbeeMap
+	}
+}
+
+def isKnownDescription(description) {
+	if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
+		def descMap = parseDescriptionAsMap(description)
+		if (descMap.cluster == "0006" || descMap.clusterId == "0006") {
+			isDescriptionOnOff(descMap)
+		}
+		else if (descMap.cluster == "0008" || descMap.clusterId == "0008"){
+			isDescriptionLevel(descMap)
+		}
+		else if (descMap.cluster == "0702" || descMap.clusterId == "0702"){
+			isDescriptionPower(descMap)
+		}
+		else {
+			return "false"
+		}
+	}
+	else if(description?.startsWith("on/off:")) {
+		def switchValue = description?.endsWith("1") ? "on" : "off"
+		return	[type: "switch", value : switchValue]
+	}
+	else {
+		return "false"
+	}
+}
+
+def isDescriptionOnOff(descMap) {
+	def switchValue = "undefined"
+	if (descMap.cluster == "0006") {				//cluster info from read attr
+		value = descMap.value
+		if (value == "01"){
+			switchValue = "on"
+		}
+		else if (value == "00"){
+			switchValue = "off"
+		}
+	}
+	else if (descMap.clusterId == "0006") {
+		//cluster info from catch all
+		//command 0B is Default response and the last two bytes are [on/off][success]. on/off=00, success=00
+		//command 01 is Read attr response. the last two bytes are [datatype][value]. boolean datatype=10; on/off value = 01/00
+		if ((descMap.command=="0B" && descMap.raw.endsWith("0100")) || (descMap.command=="01" && descMap.raw.endsWith("1001"))){
+			switchValue = "on"
+		}
+		else if ((descMap.command=="0B" && descMap.raw.endsWith("0000")) || (descMap.command=="01" && descMap.raw.endsWith("1000"))){
+			switchValue = "off"
+		}
+		else if(descMap.command=="07"){
+			return	[type: "update", value : "switch (0006) capability configured successfully"]
+		}
+	}
+
+	if (switchValue != "undefined"){
+		return	[type: "switch", value : switchValue]
+	}
+	else {
+		return "false"
+	}
+
+}
+
+//@return - false or "success" or level [0-100]
+def isDescriptionLevel(descMap) {
+	def dimmerValue = -1
+	if (descMap.cluster == "0008"){
+		//TODO: the message returned with catchall is command 0B with clusterId 0008. That is just a confirmation message
+		def value = convertHexToInt(descMap.value)
+		dimmerValue = Math.round(value * 100 / 255)
+		if(dimmerValue==0 && value > 0) {
+			dimmerValue = 1						//handling for non-zero hex value less than 3
+		}
+	}
+	else if(descMap.clusterId == "0008") {
+		if(descMap.command=="0B"){
+			return	[type: "update", value : "level updated successfully"]					//device updating the level change was successful. no value sent.
+		}
+		else if(descMap.command=="07"){
+			return	[type: "update", value : "level (0008) capability configured successfully"]
+		}
+	}
+
+	if (dimmerValue != -1){
+		return	[type: "level", value : dimmerValue]
+
+	}
+	else {
+		return "false"
+	}
+}
+
+def isDescriptionPower(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0702") {
+		if (descMap.attrId == "0400") {
+			powerValue = convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0702") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0702) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return "false"
+	}
+}
+
+
+def onOffConfig() {
+	[
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 6 0 0x10 0 600 {01}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+	]
+}
+
+//level config for devices with min reporting interval as 5 seconds and reporting interval if no activity as 1hour (3600s)
+//min level change is 01
+def levelConfig() {
+	[
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 8 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 8 0 0x20 1 3600 {01}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+	]
+}
+
+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 05
+def powerConfig() {
+	[
+			//Meter (Power) Reporting
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0702 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 0x0702 0x0400 0x2A 1 600 {05}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+	]
+}
+
+def setLevelWithRate(level, rate) {
+	if(rate == null){
+		rate = "0000"
+	}
+	level = convertToHexString(level * 255 / 100) 				//Converting the 0-100 range to 0-FF range in hex
+	["st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {$level $rate}"]
+}
+
+String convertToHexString(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}

devicetypes/smartthings/ge-zigbee-switch.src/ge-zigbee-switch.groovy

@@ -0,0 +1,284 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	    GE/Jasco ZigBee Switch
+ *
+ *	Author: SmartThings
+ *	Date: 2015-07-01
+ */
+
+metadata {
+	// Automatically generated. Make future change here.
+	definition (name: "GE ZigBee Switch", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch"
+		capability "Power Meter"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Actuator"
+		capability "Sensor"
+
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		valueTile("power", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "power", label:'${currentValue} Watts'
+		}
+		main "switch"
+		details(["switch", "power", "refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	log.debug "description is $description"
+
+	def finalResult = isKnownDescription(description)
+	if (finalResult != "false") {
+		log.info finalResult
+		if (finalResult.type == "update") {
+			log.info "$device updates: ${finalResult.value}"
+		}
+		else if (finalResult.type == "power") {
+			def powerValue = (finalResult.value as Integer)/10
+			sendEvent(name: "power", value: powerValue)
+
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/
+		}
+		else {
+			sendEvent(name: finalResult.type, value: finalResult.value)
+		}
+	}
+	else {
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug parseDescriptionAsMap(description)
+	}
+}
+
+// Commands to device
+def zigbeeCommand(cluster, attribute){
+	"st cmd 0x${device.deviceNetworkId} ${endpointId} ${cluster} ${attribute} {}"
+}
+
+def off() {
+	zigbeeCommand("6", "0")
+}
+
+def on() {
+	zigbeeCommand("6", "1")
+}
+
+def refresh() {
+	[
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0702 0x0400", "delay 500"
+	]
+
+}
+
+def configure() {
+	onOffConfig() + powerConfig() + refresh()
+}
+
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+//Need to reverse array of size 2
+private byte[] reverseArray(byte[] array) {
+	byte tmp;
+	tmp = array[1];
+	array[1] = array[0];
+	array[0] = tmp;
+	return array
+}
+
+def parseDescriptionAsMap(description) {
+	if (description?.startsWith("read attr -")) {
+		(description - "read attr - ").split(",").inject([:]) { map, param ->
+			def nameAndValue = param.split(":")
+			map += [(nameAndValue[0].trim()): nameAndValue[1].trim()]
+		}
+	}
+	else if (description?.startsWith("catchall: ")) {
+		def seg = (description - "catchall: ").split(" ")
+		def zigbeeMap = [:]
+		zigbeeMap += [raw: (description - "catchall: ")]
+		zigbeeMap += [profileId: seg[0]]
+		zigbeeMap += [clusterId: seg[1]]
+		zigbeeMap += [sourceEndpoint: seg[2]]
+		zigbeeMap += [destinationEndpoint: seg[3]]
+		zigbeeMap += [options: seg[4]]
+		zigbeeMap += [messageType: seg[5]]
+		zigbeeMap += [dni: seg[6]]
+		zigbeeMap += [isClusterSpecific: Short.valueOf(seg[7], 16) != 0]
+		zigbeeMap += [isManufacturerSpecific: Short.valueOf(seg[8], 16) != 0]
+		zigbeeMap += [manufacturerId: seg[9]]
+		zigbeeMap += [command: seg[10]]
+		zigbeeMap += [direction: seg[11]]
+		zigbeeMap += [data: seg.size() > 12 ? seg[12].split("").findAll { it }.collate(2).collect {
+			it.join('')
+		} : []]
+
+		zigbeeMap
+	}
+}
+
+def isKnownDescription(description) {
+	if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
+		def descMap = parseDescriptionAsMap(description)
+		if (descMap.cluster == "0006" || descMap.clusterId == "0006") {
+			isDescriptionOnOff(descMap)
+		}
+		else if (descMap.cluster == "0702" || descMap.clusterId == "0702"){
+			isDescriptionPower(descMap)
+		}
+		else {
+			return "false"
+		}
+	}
+	else if(description?.startsWith("on/off:")) {
+		def switchValue = description?.endsWith("1") ? "on" : "off"
+		return	[type: "switch", value : switchValue]
+	}
+	else {
+		return "false"
+	}
+}
+
+def isDescriptionOnOff(descMap) {
+	def switchValue = "undefined"
+	if (descMap.cluster == "0006") {				//cluster info from read attr
+		value = descMap.value
+		if (value == "01"){
+			switchValue = "on"
+		}
+		else if (value == "00"){
+			switchValue = "off"
+		}
+	}
+	else if (descMap.clusterId == "0006") {
+		//cluster info from catch all
+		//command 0B is Default response and the last two bytes are [on/off][success]. on/off=00, success=00
+		//command 01 is Read attr response. the last two bytes are [datatype][value]. boolean datatype=10; on/off value = 01/00
+		if ((descMap.command=="0B" && descMap.raw.endsWith("0100")) || (descMap.command=="01" && descMap.raw.endsWith("1001"))){
+			switchValue = "on"
+		}
+		else if ((descMap.command=="0B" && descMap.raw.endsWith("0000")) || (descMap.command=="01" && descMap.raw.endsWith("1000"))){
+			switchValue = "off"
+		}
+		else if(descMap.command=="07"){
+			return	[type: "update", value : "switch (0006) capability configured successfully"]
+		}
+	}
+
+	if (switchValue != "undefined"){
+		return	[type: "switch", value : switchValue]
+	}
+	else {
+		return "false"
+	}
+
+}
+
+def isDescriptionPower(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0702") {
+		if (descMap.attrId == "0400") {
+			powerValue = convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0702") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0702) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return "false"
+	}
+}
+
+
+def onOffConfig() {
+	[
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 6 0 0x10 0 600 {01}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+	]
+}
+
+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 05
+def powerConfig() {
+	[
+			//Meter (Power) Reporting
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0702 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 0x0702 0x0400 0x2A 1 600 {05}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+	]
+}
+
+String convertToHexString(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,7 +57,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes
@@ -172,3 +172,6 @@ def verifyPercent(percent) {
     }
 }
 
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,11 +7,9 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
-		capability "Health Check"
-
 		attribute "networkAddress", "string"
-		// Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
-		// Possible values "Online" or "Offline"
+        // Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
+        // Possible values "Online" or "Offline"
 		attribute "status", "string"
 		// Id is the number on the back of the hub, Hue uses last six digits of Mac address
 		// This is also used in the Hue application as ID
@@ -44,10 +42,6 @@ metadata {
 	}
 }
 
-void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
-}
-
 // parse events into attributes
 def parse(description) {
 	log.debug "Parsing '${description}'"
@@ -76,8 +70,13 @@ def parse(description) {
 					def bulbs = new groovy.json.JsonSlurper().parseText(msg.body)
 					if (bulbs.state) {
 						log.info "Bridge response: $msg.body"
+					} else {
+						// Sending Bulbs List to parent"
+						if (parent.isInBulbDiscovery())
+							log.info parent.bulbListHandler(device.hub.id, msg.body)
 					}
-				} else if (contentType?.contains("xml")) {
+				}
+				else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
 					parent.hubVerification(device.hub.id, msg.body)
 				}
@@ -86,4 +85,3 @@ def parse(description) {
 	}
 	results
 }
-

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,7 +66,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes
@@ -174,7 +174,7 @@ void setColorTemperature(value) {
 
 void refresh() {
     log.debug "Executing 'refresh'"
-    parent?.manualRefresh()
+    parent.manualRefresh()
 }
 
 def verifyPercent(percent) {
@@ -188,3 +188,6 @@ def verifyPercent(percent) {
     }
 }
 
+def ping() {
+    log.trace "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,7 +50,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes
@@ -93,3 +93,6 @@ void refresh() {
 	parent.manualRefresh()
 }
 
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,7 +55,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes
@@ -107,3 +107,6 @@ void refresh() {
     parent.manualRefresh()
 }
 
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -11,9 +11,9 @@ metadata {
 		capability "Color Temperature"
 		capability "Switch"
 		capability "Switch Level" // brightness
+		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Health Check"
 	}
 
 	simulator {
@@ -23,6 +23,7 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
 				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
 				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
@@ -63,8 +64,12 @@ metadata {
 	}
 }
 
-void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
+// parse events into attributes
+def parse(String description) {
+	if (description == 'updated') {
+		return // don't poll when config settings is being updated as it may time out
+	}
+	poll()
 }
 
 // handle commands
@@ -136,6 +141,7 @@ def setLevel(percentage) {
 		percentage = 1 // clamp to 1%
 	}
 	if (percentage == 0) {
+		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
@@ -187,17 +193,14 @@ def off() {
 	return []
 }
 
-def refresh() {
-	log.debug "Executing 'refresh'"
-	
+def poll() {
+	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
-		state.online = false
-		sendEvent(name: "DeviceWatch-DeviceStatusUpdate", value: "offline", displayed: false)
- 		log.warn "$device is Offline"
+		sendEvent(name: "switch", value: "unreachable")
 		return []
 	} else if (resp.status != 200) {
-		log.error("Unexpected result in refresh(): [${resp.status}] ${resp.data}")
+		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
 		return []
 	}
 	def data = resp.data[0]
@@ -206,20 +209,19 @@ def refresh() {
 	sendEvent(name: "label", value: data.label)
 	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
 	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
-	sendEvent(name: "switch", value: data.power)
+	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
 	sendEvent(name: "color", value: colorUtil.hslToHex((data.color.hue / 3.6) as int, (data.color.saturation * 100) as int))
 	sendEvent(name: "hue", value: data.color.hue / 3.6)
 	sendEvent(name: "saturation", value: data.color.saturation * 100)
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
-	sendEvent(name: "model", value: data.product.name)
+	sendEvent(name: "model", value: "${data.product.company} ${data.product.name}")
 
-	if (data.connected) {
-		sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false)
-		log.debug "$device is Online"
-	} else {
-		sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false)
-		log.warn "$device is Offline"
+	return []
 }
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+	poll()
 }
 
 def selector() {

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -10,9 +10,9 @@ metadata {
 		capability "Color Temperature"
 		capability "Switch"
 		capability "Switch Level" // brightness
+		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Health Check"
 	}
 
 	simulator {
@@ -22,12 +22,13 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
 				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
 				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
 
+			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel"
 			}
@@ -52,10 +53,15 @@ metadata {
 		main "switch"
 		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
 	}
+
 }
 
-void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
+// parse events into attributes
+def parse(String description) {
+	if (description == 'updated') {
+		return // don't poll when config settings is being updated as it may time out
+	}
+	poll()
 }
 
 // handle commands
@@ -65,6 +71,7 @@ def setLevel(percentage) {
 		percentage = 1 // clamp to 1%
 	}
 	if (percentage == 0) {
+		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
@@ -116,17 +123,14 @@ def off() {
 	return []
 }
 
-def refresh() {
-	log.debug "Executing 'refresh'"
-	
+def poll() {
+	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
-		state.online = false
-		sendEvent(name: "DeviceWatch-DeviceStatusUpdate", value: "offline", displayed: false)
-		log.warn "$device is Offline"
+		sendEvent(name: "switch", value: "unreachable")
 		return []
 	} else if (resp.status != 200) {
-		log.error("Unexpected result in refresh(): [${resp.status}] ${resp.data}")
+		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
 		return []
 	}
 	def data = resp.data[0]
@@ -134,17 +138,16 @@ def refresh() {
 	sendEvent(name: "label", value: data.label)
 	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
 	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
-	sendEvent(name: "switch", value: data.power)
+	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
 	sendEvent(name: "model", value: data.product.name)
 
-	if (data.connected) {
-		sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false)
-		log.debug "$device is Online"
-	} else {
-		sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false)
-		log.warn "$device is Offline"
-	}
+	return []
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+	poll()
 }
 
 def selector() {

devicetypes/smartthings/momentary-button-tile.src/momentary-button-tile.groovy

@@ -43,8 +43,8 @@ def parse(String description) {
 }
 
 def push() {
-	sendEvent(name: "switch", value: "on", isStateChange: true, displayed: false)
-	sendEvent(name: "switch", value: "off", isStateChange: true, displayed: false)
+	sendEvent(name: "switch", value: "on", isStateChange: true, display: false)
+	sendEvent(name: "switch", value: "off", isStateChange: true, display: false)
 	sendEvent(name: "momentary", value: "pushed", isStateChange: true)
 }
 

devicetypes/smartthings/nyce-open-closed-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/nyce-open-closed-sensor.src/README.md

@@ -1,41 +0,0 @@
-# Nyce Door/Window Sensor (Open/Close Sensor)
-
-Cloud Execution
-
-Works with:
-
-* [NYCE Door/Window Sensor NCZ-3011](https://support.smartthings.com/hc/en-us/articles/204576764-NYCE-Door-Window-Sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Contact Sensor** - can detect contact (with possible values - open/closed)
-* **Battery** - defines device uses a battery
-* **Refresh** - _refresh()_ command for status updates
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Nyce Door/Window sensor with reporting interval of 5 min.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
- 
-* __12min__ checkInterval
-
-
-## Battery Specification
-
-One 3V CR2032 battery required.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
-* [Nyce Door/Window Sensor](https://support.smartthings.com/hc/en-us/articles/204576764-NYCE-Door-Window-Sensor)

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -19,26 +19,25 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "NYCE Open/Closed Sensor", namespace: "smartthings", author: "NYCE") {
-		capability "Battery"
+    	capability "Battery"
 		capability "Configuration"
-		capability "Contact Sensor"
+        capability "Contact Sensor"
 		capability "Refresh"
-		capability "Health Check"
-
-		command "enrollResponse"
-
-
-		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
+        
+        command "enrollResponse"
+ 
+ 
+ 		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
 		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
-		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
-		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
-		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
+        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
 	}
-
+ 
 	simulator {
-
+ 
 	}
-
+ 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
@@ -274,28 +273,23 @@ private List parseIasMessage(String description) {
 	return resultListMap
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-}
-
 def configure() {
-	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 
-	def enrollCmds = [
+	def configCmds = [
+			//battery reporting and heartbeat
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 1 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500",
+
+
 			// Writes CIE attribute on end device to direct reports to the hub's EUID
 			"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 			"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 	]
 
 	log.debug "configure: Write IAS CIE"
-	// battery minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	return enrollCmds + zigbee.batteryConfig(30, 300) + refresh() // send refresh cmds as part of config
+	return configCmds
 }
 
 def enrollResponse() {
@@ -340,8 +334,7 @@ Integer convertHexToInt(hex) {
 
 def refresh() {
 	log.debug "Refreshing Battery"
-	def refreshCmds = [
+	[
 			"st rattr 0x${device.deviceNetworkId} ${endpointId} 1 0x20", "delay 200"
 	]
-	return refreshCmds + enrollResponse()
 }

devicetypes/smartthings/osram-lightify-gardenspot-mini-rgb.src/osram-lightify-gardenspot-mini-rgb.groovy

@@ -0,0 +1,384 @@
+/*
+    Osram Lightify Gardenspot Mini RGB
+
+    Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
+    that issue by using state variables
+*/
+
+metadata {
+    definition (name: "OSRAM LIGHTIFY Gardenspot mini RGB", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Color Temperature"
+        capability "Actuator"
+        capability "Switch"
+        capability "Switch Level"
+        capability "Configuration"
+        capability "Polling"
+        capability "Refresh"
+        capability "Sensor"
+        capability "Color Control"
+
+        attribute "colorName", "string"
+
+        command "setAdjustedColor"
+
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB"
+    }
+
+    // simulator metadata
+    simulator {
+        // status messages
+        status "on": "on/off: 1"
+        status "off": "on/off: 0"
+
+        // reply messages
+        reply "zcl on-off on": "on/off: 1"
+        reply "zcl on-off off": "on/off: 0"
+    }
+
+    // UI tile definitions
+    tiles {
+        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+            state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821"
+            state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff"
+        }
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
+            state "color", action:"setAdjustedColor"
+        }
+        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat") {
+            state "colorName", label: '${currentValue}'
+        }
+
+        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+            state "level", action:"switch level.setLevel"
+        }
+        valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+            state "level", label: 'Level ${currentValue}%'
+        }
+
+        main(["switch"])
+        details(["switch", "refresh", "colorName", "levelSliderControl", "level", "rgbSelector"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    //log.info "description is $description"
+    if (description?.startsWith("catchall:")) {
+        if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
+        {
+            def result = createEvent(name: "switch", value: "on")
+            log.debug "Parse returned ${result?.descriptionText}"
+            return result
+        }
+        else if(description?.endsWith("0000") || description?.endsWith("1000") || description?.matches("on/off\\s*:\\s*0"))
+        {
+            if(!(description?.startsWith("catchall: 0104 0300"))){
+                def result = createEvent(name: "switch", value: "off")
+                log.debug "Parse returned ${result?.descriptionText}"
+                return result
+            }
+        }
+    }
+    else if (description?.startsWith("read attr -")) {
+        def descMap = parseDescriptionAsMap(description)
+        log.trace "descMap : $descMap"
+
+        if (descMap.cluster == "0300") {
+            if(descMap.attrId == "0000"){  //Hue Attribute
+                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
+                log.debug "Hue value returned is $hueValue"
+                sendEvent(name: "hue", value: hueValue, displayed:false)
+            }
+            else if(descMap.attrId == "0001"){ //Saturation Attribute
+                def saturationValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
+                log.debug "Saturation from refresh is $saturationValue"
+                sendEvent(name: "saturation", value: saturationValue, displayed:false)
+            }
+        }
+        else if(descMap.cluster == "0008"){
+            def dimmerValue = Math.round(convertHexToInt(descMap.value) * 100 / 255)
+            log.debug "dimmer value is $dimmerValue"
+            sendEvent(name: "level", value: dimmerValue)
+        }
+    }
+    else {
+        def name = description?.startsWith("on/off: ") ? "switch" : null
+        def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
+        def result = createEvent(name: name, value: value)
+        log.debug "Parse returned ${result?.descriptionText}"
+        return result
+    }
+
+
+}
+
+def on() {
+    log.debug "on()"
+    sendEvent(name: "switch", value: "on")
+    setLevel(state?.levelValue)
+}
+
+def zigbeeOff() {
+    "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+}
+
+def off() {
+    log.debug "off()"
+    sendEvent(name: "switch", value: "off")
+    zigbeeOff()
+}
+
+def refresh() {
+    [
+            "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
+            "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
+            "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 0", "delay 500",
+            "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 1"
+    ]
+
+}
+
+def configure() {
+    state.levelValue = 100
+    log.debug "Configuring Reporting and Bindings."
+    def configCmds = [
+
+            //Switch Reporting
+            "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
+            "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1000",
+
+            //Level Control Reporting
+            "zcl global send-me-a-report 8 0 0x20 5 3600 {0010}", "delay 200",
+            "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1500",
+
+            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 6 {${device.zigbeeId}} {}", "delay 1000",
+            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 8 {${device.zigbeeId}} {}", "delay 500",
+            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x0300 {${device.zigbeeId}} {}", "delay 500"
+    ]
+    return configCmds + refresh() // send refresh cmds as part of config
+}
+
+def parseDescriptionAsMap(description) {
+    (description - "read attr - ").split(",").inject([:]) { map, param ->
+        def nameAndValue = param.split(":")
+        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+    }
+}
+
+def poll(){
+    log.debug "Poll is calling refresh"
+    refresh()
+}
+
+def zigbeeSetLevel(level) {
+    "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
+}
+
+def setLevel(value) {
+	state.levelValue = (value==null) ? 100 : value
+    log.trace "setLevel($value)"
+    def cmds = []
+
+    if (value == 0) {
+        sendEvent(name: "switch", value: "off")
+        cmds << zigbeeOff()
+    }
+    else if (device.latestValue("switch") == "off") {
+        sendEvent(name: "switch", value: "on")
+    }
+
+    sendEvent(name: "level", value: state.levelValue)
+    def level = hex(state.levelValue * 255 / 100)
+    cmds << zigbeeSetLevel(level)
+
+    //log.debug cmds
+    cmds
+}
+
+//input Hue Integer values; returns color name for saturation 100%
+private getColorName(hueValue){
+    if(hueValue>100 || hueValue<0)
+        return
+
+    hueValue = Math.round(hueValue / 100 * 360)
+
+    log.debug "hue value is $hueValue"
+
+    def colorName = "Color Mode"
+    if(hueValue>=0 && hueValue <= 4){
+        colorName = "Red"
+    }
+    else if (hueValue>=5 && hueValue <=21 ){
+        colorName = "Brick Red"
+    }
+    else if (hueValue>=22 && hueValue <=30 ){
+        colorName = "Safety Orange"
+    }
+    else if (hueValue>=31 && hueValue <=40 ){
+        colorName = "Dark Orange"
+    }
+    else if (hueValue>=41 && hueValue <=49 ){
+        colorName = "Amber"
+    }
+    else if (hueValue>=50 && hueValue <=56 ){
+        colorName = "Gold"
+    }
+    else if (hueValue>=57 && hueValue <=65 ){
+        colorName = "Yellow"
+    }
+    else if (hueValue>=66 && hueValue <=83 ){
+        colorName = "Electric Lime"
+    }
+    else if (hueValue>=84 && hueValue <=93 ){
+        colorName = "Lawn Green"
+    }
+    else if (hueValue>=94 && hueValue <=112 ){
+        colorName = "Bright Green"
+    }
+    else if (hueValue>=113 && hueValue <=135 ){
+        colorName = "Lime"
+    }
+    else if (hueValue>=136 && hueValue <=166 ){
+        colorName = "Spring Green"
+    }
+    else if (hueValue>=167 && hueValue <=171 ){
+        colorName = "Turquoise"
+    }
+    else if (hueValue>=172 && hueValue <=187 ){
+        colorName = "Aqua"
+    }
+    else if (hueValue>=188 && hueValue <=203 ){
+        colorName = "Sky Blue"
+    }
+    else if (hueValue>=204 && hueValue <=217 ){
+        colorName = "Dodger Blue"
+    }
+    else if (hueValue>=218 && hueValue <=223 ){
+        colorName = "Navy Blue"
+    }
+    else if (hueValue>=224 && hueValue <=251 ){
+        colorName = "Blue"
+    }
+    else if (hueValue>=252 && hueValue <=256 ){
+        colorName = "Han Purple"
+    }
+    else if (hueValue>=257 && hueValue <=274 ){
+        colorName = "Electric Indigo"
+    }
+    else if (hueValue>=275 && hueValue <=289 ){
+        colorName = "Electric Purple"
+    }
+    else if (hueValue>=290 && hueValue <=300 ){
+        colorName = "Orchid Purple"
+    }
+    else if (hueValue>=301 && hueValue <=315 ){
+        colorName = "Magenta"
+    }
+    else if (hueValue>=316 && hueValue <=326 ){
+        colorName = "Hot Pink"
+    }
+    else if (hueValue>=327 && hueValue <=335 ){
+        colorName = "Deep Pink"
+    }
+    else if (hueValue>=336 && hueValue <=339 ){
+        colorName = "Raspberry"
+    }
+    else if (hueValue>=340 && hueValue <=352 ){
+        colorName = "Crimson"
+    }
+    else if (hueValue>=353 && hueValue <=360 ){
+        colorName = "Red"
+    }
+
+    colorName
+}
+
+private getEndpointId() {
+    new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value, width=2) {
+    def s = new BigInteger(Math.round(value).toString()).toString(16)
+    while (s.size() < width) {
+        s = "0" + s
+    }
+    s
+}
+
+private evenHex(value){
+    def s = new BigInteger(Math.round(value).toString()).toString(16)
+    while (s.size() % 2 != 0) {
+        s = "0" + s
+    }
+    s
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private Integer convertHexToInt(hex) {
+    Integer.parseInt(hex,16)
+}
+
+//Need to reverse array of size 2
+private byte[] reverseArray(byte[] array) {
+    byte tmp;
+    tmp = array[1];
+    array[1] = array[0];
+    array[0] = tmp;
+    return array
+}
+
+def setAdjustedColor(value) {
+	log.debug "setAdjustedColor: ${value}"
+	def adjusted = value + [:]
+	adjusted.level = null // needed because color picker always sends 100
+	setColor(adjusted)
+}
+
+def setColor(value){
+    log.trace "setColor($value)"
+    def max = 0xfe
+
+    if (value.hex) { sendEvent(name: "color", value: value.hex, displayed:false)}
+
+    def colorName = getColorName(value.hue)
+    sendEvent(name: "colorName", value: colorName)
+
+    log.debug "color name is : $colorName"
+    sendEvent(name: "hue", value: value.hue, displayed:false)
+    sendEvent(name: "saturation", value: value.saturation, displayed:false)
+    def scaledHueValue = evenHex(Math.round(value.hue * max / 100.0))
+    def scaledSatValue = evenHex(Math.round(value.saturation * max / 100.0))
+
+    def cmd = []
+    if (value.switch != "off" && device.latestValue("switch") == "off") {
+        cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
+        cmd << "delay 150"
+    }
+
+    cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x00 {${scaledHueValue} 00 0000}"
+    cmd << "delay 150"
+    cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x03 {${scaledSatValue} 0000}"
+    
+    if (value.level) {
+        state.levelValue = value.level
+        sendEvent(name: "level", value: value.level)
+        def level = hex(value.level * 255 / 100)
+        cmd << zigbeeSetLevel(level)
+    }
+    
+    if (value.switch == "off") {
+        cmd << "delay 150"
+        cmd << off()
+    }
+
+    cmd
+}

devicetypes/smartthings/osram-lightify-led-flexible-strip-rgbw.src/osram-lightify-led-flexible-strip-rgbw.groovy

@@ -0,0 +1,459 @@
+/*
+    Osram Flex RGBW Light Strip
+
+    Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
+    that issue by using state variables
+*/
+//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
+
+metadata {
+	definition (name: "OSRAM LIGHTIFY LED Flexible Strip RGBW", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Color Temperature"
+        capability "Actuator"
+        capability "Switch"
+		capability "Switch Level"
+		capability "Configuration"
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+		capability "Color Control"
+
+        attribute "colorName", "string"
+
+        command "setAdjustedColor"
+
+
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW"
+        //fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW"
+
+    }
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	// UI tile definitions
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+            state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821"
+			state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff"
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
+			state "colorTemperature", action:"color temperature.setColorTemperature"
+		}
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
+			state "colorTemperature", label: '${currentValue} K'
+		}
+        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat") {
+			state "colorName", label: '${currentValue}'
+		}
+
+        controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
+			state "color", action:"setAdjustedColor"
+		}
+
+        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+			state "level", label: 'Level ${currentValue}%'
+		}
+
+
+		main(["switch"])
+		details(["switch", "refresh", "colorName", "levelSliderControl", "level", "colorTempSliderControl", "colorTemp", "rgbSelector"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	//log.info "description is $description"
+	if (description?.startsWith("catchall:")) {
+		if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
+        {
+        	def result = createEvent(name: "switch", value: "on")
+            log.debug "Parse returned ${result?.descriptionText}"
+            return result
+        }
+        else if(description?.endsWith("0000") || description?.endsWith("1000") || description?.matches("on/off\\s*:\\s*0"))
+        {
+            if(!(description?.startsWith("catchall: 0104 0300"))){
+                def result = createEvent(name: "switch", value: "off")
+                log.debug "Parse returned ${result?.descriptionText}"
+                return result
+            }
+        }
+
+	}
+    else if (description?.startsWith("read attr -")) {	//for values returned after hitting refresh
+        def descMap = parseDescriptionAsMap(description)
+        log.trace "descMap : $descMap"
+
+        if (descMap.cluster == "0300") {
+            if(descMap.attrId == "0007"){
+                log.debug "in read attr"
+                log.debug descMap.value
+                def tempInMired = convertHexToInt(descMap.value)
+                def tempInKelvin = Math.round(1000000/tempInMired)
+                log.trace "temp in kelvin: $tempInKelvin"
+                sendEvent(name: "colorTemperature", value: tempInKelvin, displayed:false)
+            }
+            else if(descMap.attrId == "0008"){  //Color mode attribute
+                if(descMap.value == "00"){
+                    state.colorType = "rgb"
+                }else if(descMap.value == "02"){
+                    state.colorType = "white"
+                }
+            }
+            else if(descMap.attrId == "0000"){  //Hue Attribute
+                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
+                log.debug "Hue value returned is $hueValue"
+                sendEvent(name: "hue", value: hueValue, displayed:false)
+            }
+            else if(descMap.attrId == "0001"){ //Saturation Attribute
+                def saturationValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
+                log.debug "Saturation from refresh is $saturationValue"
+                sendEvent(name: "saturation", value: saturationValue, displayed:false)
+            }
+        }
+        else if(descMap.cluster == "0008"){
+        	def dimmerValue = Math.round(convertHexToInt(descMap.value) * 100 / 255)
+        	log.debug "dimmer value is $dimmerValue"
+            sendEvent(name: "level", value: dimmerValue)
+        }
+    }
+	else {
+		def name = description?.startsWith("on/off: ") ? "switch" : null
+		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
+		def result = createEvent(name: name, value: value)
+        log.debug "description is $description"
+		return result
+	}
+
+
+}
+
+def on() {
+	log.debug "on()"
+	sendEvent(name: "switch", value: "on")
+    setLevel(state?.levelValue)
+}
+
+def zigbeeOff() {
+    "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+}
+
+def off() {
+	log.debug "off()"
+	sendEvent(name: "switch", value: "off")
+	zigbeeOff()
+}
+
+def refresh() {
+    [
+        "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 0", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 1", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 7", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 8"
+    ]
+
+}
+
+def configure() {
+    state.levelValue = 100
+    state.colorType = "white"
+	log.debug "Configuring Reporting and Bindings."
+	def configCmds = [
+
+        //Switch Reporting
+        "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1000",
+
+        //Level Control Reporting
+        "zcl global send-me-a-report 8 0 0x20 5 3600 {0010}", "delay 200",
+        "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1500",
+
+        "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 6 {${device.zigbeeId}} {}", "delay 1000",
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 8 {${device.zigbeeId}} {}", "delay 500",
+        "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x0300 {${device.zigbeeId}} {}", "delay 500"
+	]
+    return configCmds + refresh() // send refresh cmds as part of config
+}
+
+def setColorTemperature(value) {
+    state?.colorType = "white"
+	if(value<101){
+    	value = (value*38) + 2700		//Calculation of mapping 0-100 to 2700-6500
+    }
+
+    def tempInMired = Math.round(1000000/value)
+    def finalHex = swapEndianHex(hex(tempInMired, 4))
+    def genericName = getGenericName(value)
+    log.debug "generic name is : $genericName"
+
+    def cmds = []
+    sendEvent(name: "colorTemperature", value: value, displayed:false)
+    sendEvent(name: "colorName", value: genericName)
+
+	cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x0300 0x0a {${finalHex} 2000}"
+
+    cmds
+}
+
+def parseDescriptionAsMap(description) {
+    (description - "read attr - ").split(",").inject([:]) { map, param ->
+        def nameAndValue = param.split(":")
+        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+    }
+}
+
+def poll(){
+	log.debug "Poll is calling refresh"
+	refresh()
+}
+
+def zigbeeSetLevel(level) {
+    "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
+}
+
+def setLevel(value) {
+	state.levelValue = (value==null) ? 100 : value
+	log.trace "setLevel($value)"
+	def cmds = []
+
+	if (value == 0) {
+		sendEvent(name: "switch", value: "off")
+		cmds << zigbeeOff()
+	}
+	else if (device.latestValue("switch") == "off") {
+		sendEvent(name: "switch", value: "on")
+	}
+
+	sendEvent(name: "level", value: state.levelValue)
+	def level = hex(state.levelValue * 255 / 100)
+	cmds << zigbeeSetLevel(level)
+
+	//log.debug cmds
+	cmds
+}
+
+//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
+private getGenericName(value){
+    def genericName = "White"
+    if(state?.colorType == "rgb"){
+        genericName = "Color Mode"
+    }
+	else{
+        if(value < 3300){
+            genericName = "Soft White"
+        } else if(value < 4150){
+            genericName = "Moonlight"
+        } else if(value < 5000){
+            genericName = "Cool White"
+        } else if(value <= 6500){
+            genericName = "Daylight"
+        }
+    }
+
+    genericName
+}
+
+//input Hue Integer values; returns color name for saturation 100%
+private getColorName(hueValue){
+    if(hueValue>100 || hueValue<0)
+        return
+
+    hueValue = Math.round(hueValue / 100 * 360)
+
+    log.debug "hue value is $hueValue"
+
+    def colorName = "Color Mode"
+    if(hueValue>=0 && hueValue <= 4){
+        colorName = "Red"
+    }
+    else if (hueValue>=5 && hueValue <=21 ){
+        colorName = "Brick Red"
+    }
+    else if (hueValue>=22 && hueValue <=30 ){
+        colorName = "Safety Orange"
+    }
+    else if (hueValue>=31 && hueValue <=40 ){
+        colorName = "Dark Orange"
+    }
+    else if (hueValue>=41 && hueValue <=49 ){
+        colorName = "Amber"
+    }
+    else if (hueValue>=50 && hueValue <=56 ){
+        colorName = "Gold"
+    }
+    else if (hueValue>=57 && hueValue <=65 ){
+        colorName = "Yellow"
+    }
+    else if (hueValue>=66 && hueValue <=83 ){
+        colorName = "Electric Lime"
+    }
+    else if (hueValue>=84 && hueValue <=93 ){
+        colorName = "Lawn Green"
+    }
+    else if (hueValue>=94 && hueValue <=112 ){
+        colorName = "Bright Green"
+    }
+    else if (hueValue>=113 && hueValue <=135 ){
+        colorName = "Lime"
+    }
+    else if (hueValue>=136 && hueValue <=166 ){
+        colorName = "Spring Green"
+    }
+    else if (hueValue>=167 && hueValue <=171 ){
+        colorName = "Turquoise"
+    }
+    else if (hueValue>=172 && hueValue <=187 ){
+        colorName = "Aqua"
+    }
+    else if (hueValue>=188 && hueValue <=203 ){
+        colorName = "Sky Blue"
+    }
+    else if (hueValue>=204 && hueValue <=217 ){
+        colorName = "Dodger Blue"
+    }
+    else if (hueValue>=218 && hueValue <=223 ){
+        colorName = "Navy Blue"
+    }
+    else if (hueValue>=224 && hueValue <=251 ){
+        colorName = "Blue"
+    }
+    else if (hueValue>=252 && hueValue <=256 ){
+        colorName = "Han Purple"
+    }
+    else if (hueValue>=257 && hueValue <=274 ){
+        colorName = "Electric Indigo"
+    }
+    else if (hueValue>=275 && hueValue <=289 ){
+        colorName = "Electric Purple"
+    }
+    else if (hueValue>=290 && hueValue <=300 ){
+        colorName = "Orchid Purple"
+    }
+    else if (hueValue>=301 && hueValue <=315 ){
+        colorName = "Magenta"
+    }
+    else if (hueValue>=316 && hueValue <=326 ){
+        colorName = "Hot Pink"
+    }
+    else if (hueValue>=327 && hueValue <=335 ){
+        colorName = "Deep Pink"
+    }
+    else if (hueValue>=336 && hueValue <=339 ){
+        colorName = "Raspberry"
+    }
+    else if (hueValue>=340 && hueValue <=352 ){
+        colorName = "Crimson"
+    }
+    else if (hueValue>=353 && hueValue <=360 ){
+        colorName = "Red"
+    }
+
+    colorName
+}
+
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}
+
+private evenHex(value){
+    def s = new BigInteger(Math.round(value).toString()).toString(16)
+    while (s.size() % 2 != 0) {
+        s = "0" + s
+    }
+    s
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+//Need to reverse array of size 2
+private byte[] reverseArray(byte[] array) {
+    byte tmp;
+    tmp = array[1];
+    array[1] = array[0];
+    array[0] = tmp;
+    return array
+}
+
+def setAdjustedColor(value) {
+	log.debug "setAdjustedColor: ${value}"
+	def adjusted = value + [:]
+	adjusted.level = null // needed because color picker always sends 100
+	setColor(adjusted)
+}
+
+def setColor(value){
+    state?.colorType = "rgb"
+	log.trace "setColor($value)"
+	def max = 0xfe
+
+    if (value.hex) { sendEvent(name: "color", value: value.hex, displayed:false)}
+
+    def colorName = getColorName(value.hue)
+    log.debug "color name is : $colorName"
+    sendEvent(name: "colorName", value: colorName)
+    sendEvent(name: "colorTemperature", value: "--", displayed:false)
+
+
+    sendEvent(name: "hue", value: value.hue, displayed:false)
+	sendEvent(name: "saturation", value: value.saturation, displayed:false)
+	def scaledHueValue = evenHex(Math.round(value.hue * max / 100.0))
+	def scaledSatValue = evenHex(Math.round(value.saturation * max / 100.0))
+
+	def cmd = []
+	if (value.switch != "off" && device.latestValue("switch") == "off") {
+		cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
+		cmd << "delay 150"
+	}
+
+	cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x00 {${scaledHueValue} 00 0000}"
+	cmd << "delay 150"
+	cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x03 {${scaledSatValue} 0000}"
+
+    if (value.level) {
+        state.levelValue = value.level
+        sendEvent(name: "level", value: value.level)
+        def level = hex(value.level * 255 / 100)
+        cmd << zigbeeSetLevel(level)
+    }
+
+	if (value.switch == "off") {
+		cmd << "delay 150"
+		cmd << off()
+	}
+
+	cmd
+}

devicetypes/smartthings/osram-lightify-led-tunable-white-60w.src/osram-lightify-led-tunable-white-60w.groovy

@@ -0,0 +1,252 @@
+/*
+    Osram Tunable White 60 A19 bulb
+
+    Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
+    that issue by using state variables
+*/
+
+//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
+
+metadata {
+    definition (name: "OSRAM LIGHTIFY LED Tunable White 60W", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Color Temperature"
+        capability "Actuator"
+        capability "Switch"
+        capability "Switch Level"
+        capability "Configuration"
+        capability "Refresh"
+        capability "Sensor"
+
+        attribute "colorName", "string"
+    }
+
+    // simulator metadata
+    simulator {
+        // status messages
+        status "on": "on/off: 1"
+        status "off": "on/off: 0"
+
+        // reply messages
+        reply "zcl on-off on": "on/off: 1"
+        reply "zcl on-off off": "on/off: 0"
+    }
+
+    // UI tile definitions
+    tiles {
+        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+            state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821"
+            state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff"
+        }
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat") {
+            state "colorName", label: '${currentValue}'
+        }
+
+
+        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+            state "level", action:"switch level.setLevel"
+        }
+        valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+            state "level", label: 'Level ${currentValue}%'
+        }
+
+
+        main(["switch"])
+        details(["switch", "refresh", "colorName", "levelSliderControl", "level", "colorTempSliderControl", "colorTemp"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    //log.trace description
+
+    if (description?.startsWith("catchall:")) {
+        if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
+        {
+            def result = createEvent(name: "switch", value: "on")
+            log.debug "Parse returned ${result?.descriptionText}"
+            return result
+        }
+        else if(description?.endsWith("0000") || description?.endsWith("1000") || description?.matches("on/off\\s*:\\s*0"))
+        {
+            def result = createEvent(name: "switch", value: "off")
+            log.debug "Parse returned ${result?.descriptionText}"
+            return result
+        }
+
+    }
+    else if (description?.startsWith("read attr -")) {
+        def descMap = parseDescriptionAsMap(description)
+        log.trace "descMap : $descMap"
+
+        if (descMap.cluster == "0300") {
+            log.debug descMap.value
+            def tempInMired = convertHexToInt(descMap.value)
+            def tempInKelvin = Math.round(1000000/tempInMired)
+            log.trace "temp in kelvin: $tempInKelvin"
+            sendEvent(name: "colorTemperature", value: tempInKelvin, displayed:false)
+        }
+        else if(descMap.cluster == "0008"){
+            def dimmerValue = Math.round(convertHexToInt(descMap.value) * 100 / 255)
+            log.debug "dimmer value is $dimmerValue"
+            sendEvent(name: "level", value: dimmerValue)
+        }
+    }
+    else {
+        def name = description?.startsWith("on/off: ") ? "switch" : null
+        def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
+        def result = createEvent(name: name, value: value)
+        log.debug "Parse returned ${result?.descriptionText}"
+        return result
+    }
+}
+
+def on() {
+    log.debug "on()"
+    sendEvent(name: "switch", value: "on")
+    setLevel(state?.levelValue)
+}
+
+def off() {
+    log.debug "off()"
+    sendEvent(name: "switch", value: "off")
+    "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+}
+
+def refresh() {
+    [
+            "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
+            "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
+            "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 7"
+    ]
+
+}
+
+def configure() {
+    state.levelValue = 100
+    log.debug "Configuring Reporting and Bindings."
+    def configCmds = [
+            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x0300 {${device.zigbeeId}} {}", "delay 500"
+    ]
+    return onOffConfig() + levelConfig() + configCmds + refresh() // send refresh cmds as part of config
+}
+
+def onOffConfig() {
+    [
+            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 6 {${device.zigbeeId}} {}", "delay 200",
+            "zcl global send-me-a-report 6 0 0x10 0 300 {01}",
+            "send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+    ]
+}
+
+//level config for devices with min reporting interval as 5 seconds and reporting interval if no activity as 1hour (3600s)
+//min level change is 01
+def levelConfig() {
+    [
+            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 8 {${device.zigbeeId}} {}", "delay 200",
+            "zcl global send-me-a-report 8 0 0x20 5 3600 {01}",
+            "send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+    ]
+}
+
+def setColorTemperature(value) {
+    if(value<101){
+        value = (value*38) + 2700		//Calculation of mapping 0-100 to 2700-6500
+    }
+
+    def tempInMired = Math.round(1000000/value)
+    def finalHex = swapEndianHex(hex(tempInMired, 4))
+    def genericName = getGenericName(value)
+    log.debug "generic name is : $genericName"
+
+    def cmds = []
+    sendEvent(name: "colorTemperature", value: value, displayed:false)
+    sendEvent(name: "colorName", value: genericName)
+
+    cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x0300 0x0a {${finalHex} 2000}"
+
+    cmds
+}
+
+def parseDescriptionAsMap(description) {
+    (description - "read attr - ").split(",").inject([:]) { map, param ->
+        def nameAndValue = param.split(":")
+        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+    }
+}
+
+def setLevel(value) {
+    state.levelValue = (value==null) ? 100 : value
+    log.trace "setLevel($value)"
+    def cmds = []
+
+    if (value == 0) {
+        sendEvent(name: "switch", value: "off")
+        cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+    }
+    else if (device.latestValue("switch") == "off") {
+        sendEvent(name: "switch", value: "on")
+    }
+
+    sendEvent(name: "level", value: state.levelValue)
+    def level = hex(state.levelValue * 254 / 100)
+    cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
+
+    //log.debug cmds
+    cmds
+}
+
+//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
+private getGenericName(value){
+    def genericName = "White"
+    if(value < 3300){
+        genericName = "Soft White"
+    } else if(value < 4150){
+        genericName = "Moonlight"
+    } else if(value < 5000){
+        genericName = "Cool White"
+    } else if(value <= 6500){
+        genericName = "Daylight"
+    }
+
+    genericName
+}
+
+private getEndpointId() {
+    new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value, width=2) {
+    def s = new BigInteger(Math.round(value).toString()).toString(16)
+    while (s.size() < width) {
+        s = "0" + s
+    }
+    s
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private Integer convertHexToInt(hex) {
+    Integer.parseInt(hex,16)
+}
+
+//Need to reverse array of size 2
+private byte[] reverseArray(byte[] array) {
+    byte tmp;
+    tmp = array[1];
+    array[1] = array[0];
+    array[0] = tmp;
+    return array
+}

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -69,17 +69,15 @@ metadata {
 def parse(String description) {
 	log.debug "description is $description"
 
-	def event = [:]
 	def finalResult = isKnownDescription(description)
-	if (finalResult) {
+	if (finalResult != "false") {
 		log.info finalResult
 		if (finalResult.type == "update") {
 			log.info "$device updates: ${finalResult.value}"
-			event = null
 		}
 		else if (finalResult.type == "power") {
 			def powerValue = (finalResult.value as Integer)/10
-			event = createEvent(name: "power", value: powerValue)
+			sendEvent(name: "power", value: powerValue)
 
 			/*
 				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
@@ -89,14 +87,13 @@ def parse(String description) {
 			*/
 		}
 		else {
-			event = createEvent(name: finalResult.type, value: finalResult.value)
+			sendEvent(name: finalResult.type, value: finalResult.value)
 		}
 	}
 	else {
 		log.warn "DID NOT PARSE MESSAGE for description : $description"
 		log.debug parseDescriptionAsMap(description)
 	}
-	return event
 }
 
 // Commands to device
@@ -136,7 +133,7 @@ def refresh() {
 }
 
 def configure() {
-	refresh() + onOffConfig() + levelConfig() + powerConfig()
+	onOffConfig() + levelConfig() + powerConfig() + refresh()
 }
 
 
@@ -212,16 +209,13 @@ def isKnownDescription(description) {
 		else if (descMap.cluster == "0B04" || descMap.clusterId == "0B04"){
 			isDescriptionPower(descMap)
 		}
-		else {
-			return [:]
-		}
 	}
 	else if(description?.startsWith("on/off:")) {
 		def switchValue = description?.endsWith("1") ? "on" : "off"
 		return	[type: "switch", value : switchValue]
 	}
 	else {
-		return [:]
+		return "false"
 	}
 }
 
@@ -255,7 +249,7 @@ def isDescriptionOnOff(descMap) {
 		return	[type: "switch", value : switchValue]
 	}
 	else {
-		return [:]
+		return "false"
 	}
 
 }
@@ -282,9 +276,10 @@ def isDescriptionLevel(descMap) {
 
 	if (dimmerValue != -1){
 		return	[type: "level", value : dimmerValue]
+
 	}
 	else {
-		return [:]
+		return "false"
 	}
 }
 
@@ -306,7 +301,7 @@ def isDescriptionPower(descMap) {
 		return	[type: "power", value : powerValue]
 	}
 	else {
-		return [:]
+		return "false"
 	}
 }
 

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -47,21 +47,9 @@ def parse(String description) {
 
 // Commands to device
 def on() {
-	[
-			'zcl on-off on',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-
-	]
-
+	'zcl on-off on'
 }
 
 def off() {
-	[
-			'zcl on-off off',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-	]
+	'zcl on-off off'
 }

devicetypes/smartthings/smartpower-outlet.src/README.md

@@ -1,6 +1,6 @@
 # SmartPower Outlet
 
-Local Execution on V2 Hubs
+
 
 Works with: 
 
@@ -23,11 +23,10 @@ Works with:
 
 ## Device Health
 
-SmartPower outlet with reporting interval of 5 mins
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* V1, TV, HubV2 AppEngine < 1.5.1 - __21min__ checkInterval
-* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
+A Category C1 smart power outlet with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
 ## Troubleshooting
 

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -16,7 +16,7 @@
 
 metadata {
 	// Automatically generated. Make future change here.
-	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings", category: "C1") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"
@@ -79,7 +79,6 @@ def parse(String description) {
 	log.debug "description is $description"
 
 	def finalResult = zigbee.getKnownDescription(description)
-	def event = [:]
 
 	//TODO: Remove this after getKnownDescription can parse it automatically
 	if (!finalResult && description!="updated")
@@ -89,11 +88,10 @@ def parse(String description) {
 		log.info "final result = $finalResult"
 		if (finalResult.type == "update") {
 			log.info "$device updates: ${finalResult.value}"
-			event = null
 		}
 		else if (finalResult.type == "power") {
 			def powerValue = (finalResult.value as Integer)/10
-			event = createEvent(name: "power", value: powerValue, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true)
+			sendEvent(name: "power", value: powerValue, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true )
 			/*
 				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
 				power level is an integer. The exact power level with correct units needs to be handled in the device type
@@ -102,28 +100,13 @@ def parse(String description) {
 		}
 		else {
 			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
-			event = createEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
+			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
 		}
 	}
 	else {
-		def cluster = zigbee.parse(description)
-
-		if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07){
-			if (cluster.data[0] == 0x00) {
-				log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-				event = createEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-			}
-			else {
-				log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-				event = null
-			}
-		}
-		else {
-			log.warn "DID NOT PARSE MESSAGE for description : $description"
-			log.debug "${cluster}"
-		}
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug zigbee.parseDescriptionAsMap(description)
 	}
-	return event
 }
 
 def off() {
@@ -145,12 +128,10 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	refresh() + zigbee.onOffConfig(0, 300) + powerConfig()
+	zigbee.onOffConfig(0, 300) + powerConfig() + refresh()
 }
 
 //power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)

devicetypes/smartthings/smartsense-garage-door-multi.src/smartsense-garage-door-multi.groovy

@@ -86,7 +86,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "parse($description)"
-	def results = [:]
+	def results = null
 
 	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		// Ignore this in favor of orientation-based state

devicetypes/smartthings/smartsense-moisture-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Smartsense Moisture Sensor
 
-Local Execution on V2 Hubs
+
 
 Works with: 
 
@@ -23,11 +23,10 @@ Works with:
 
 ## Device Health
 
-SmartSense Moisture sensor with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
-* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
+A Category C2 moisture sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -102,7 +102,7 @@ def parse(String description) {
 	}
 
 	log.debug "Parse returned $map"
-	def result = map ? createEvent(map) : [:]
+	def result = map ? createEvent(map) : null
 
 	if (description?.startsWith('enroll request')) {
 		List cmds = enrollResponse()
@@ -118,28 +118,14 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+				resultMap = getBatteryResult(cluster.data.last())
 				break
 
             case 0x0402:
-				if (cluster.command == 0x07) {
-					if (cluster.data[0] == 0x00){
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
                 break
         }
     }
@@ -149,8 +135,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
 		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -192,9 +180,9 @@ private Map parseIasMessage(String description) {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return Math.round(celsius)
+		return celsius
 	} else {
-		return Math.round(celsiusToFahrenheit(celsius))
+		return celsiusToFahrenheit(celsius) as Integer
 	}
 }
 
@@ -202,37 +190,48 @@ private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 	def linkText = getLinkText(device)
 
-	def result = [:]
+	def result = [
+		name: 'battery',
+		value: '--',
+		translatable: true
+	]
 
 	def volts = rawValue / 10
 
-	if (!(rawValue == 0 || rawValue == 255)) {
-		result.name = 'battery'
-		result.translatable = true
-		result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-		if (device.getDataValue("manufacturer") == "SmartThings") {
-			volts = rawValue // For the batteryMap to work the key needs to be an int
-			def batteryMap = [28: 100, 27: 100, 26: 100, 25: 90, 24: 90, 23: 70,
-							  22: 70, 21: 50, 20: 50, 19: 30, 18: 30, 17: 15, 16: 1, 15: 0]
-			def minVolts = 15
-			def maxVolts = 28
-
-			if (volts < minVolts)
-				volts = minVolts
-			else if (volts > maxVolts)
-				volts = maxVolts
-			def pct = batteryMap[volts]
-			result.value = pct
-		} else {
-			def minVolts = 2.1
-			def maxVolts = 3.0
-			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			if (roundedPct <= 0)
-				roundedPct = 1
-			result.value = Math.min(100, roundedPct)
+	if (rawValue == 0 || rawValue == 255) {}
+	else {
+		if (volts > 3.5) {
+			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
 		}
+		else {
+			if (device.getDataValue("manufacturer") == "SmartThings") {
+				volts = rawValue // For the batteryMap to work the key needs to be an int
+				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
+								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
+				def minVolts = 15
+				def maxVolts = 28
 
+				if (volts < minVolts)
+					volts = minVolts
+				else if (volts > maxVolts)
+					volts = maxVolts
+				def pct = batteryMap[volts]
+				if (pct != null) {
+					result.value = pct
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+				}
+			}
+			else {
+				def minVolts = 2.1
+				def maxVolts = 3.0
+				def pct = (volts - minVolts) / (maxVolts - minVolts)
+				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
+				result.value = Math.min(100, roundedPct)
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+			}
+		}
 	}
 
 	return result
@@ -293,13 +292,19 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	def enrollCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+	]
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
+	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Smartsense Motion Sensor
 
-Local Execution on V2 Hubs
+
 
 Works with: 
 
@@ -22,12 +22,10 @@ Works with:
 
 ## Device Health
 
-SmartSense Motion sensor with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
-* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
-
+A Category C2 motion sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime.
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
@@ -106,7 +106,7 @@ def parse(String description) {
 	}
 
 	log.debug "Parse returned $map"
-	def result = map ? createEvent(map) : [:]
+	def result = map ? createEvent(map) : null
 
 	if (description?.startsWith('enroll request')) {
 		List cmds = enrollResponse()
@@ -122,37 +122,19 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+				resultMap = getBatteryResult(cluster.data.last())
 				break
 
 			case 0x0402:
-				if (cluster.command == 0x07) {
-					if (cluster.data[0] == 0x00) {
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
 				break
 
 			case 0x0406:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					log.debug 'motion'
-					resultMap.name = 'motion'
-				}
+				log.debug 'motion'
+				resultMap.name = 'motion'
 				break
 		}
 	}
@@ -162,8 +144,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
 		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -210,9 +194,9 @@ private Map parseIasMessage(String description) {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return Math.round(celsius)
+		return celsius
 	} else {
-		return Math.round(celsiusToFahrenheit(celsius))
+		return celsiusToFahrenheit(celsius) as Integer
 	}
 }
 
@@ -220,35 +204,48 @@ private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 	def linkText = getLinkText(device)
 
-	def result = [:]
+	def result = [
+		name: 'battery',
+		value: '--',
+		translatable: true
+	]
 
 	def volts = rawValue / 10
 
-	if (!(rawValue == 0 || rawValue == 255)) {
-		result.name = 'battery'
-		result.translatable = true
-		result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-		if (device.getDataValue("manufacturer") == "SmartThings") {
-			volts = rawValue // For the batteryMap to work the key needs to be an int
-			def batteryMap = [28: 100, 27: 100, 26: 100, 25: 90, 24: 90, 23: 70,
-							  22: 70, 21: 50, 20: 50, 19: 30, 18: 30, 17: 15, 16: 1, 15: 0]
-			def minVolts = 15
-			def maxVolts = 28
+	if (rawValue == 0 || rawValue == 255) {}
+	else {
+		if (volts > 3.5) {
+			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
+		}
+		else {
+			if (device.getDataValue("manufacturer") == "SmartThings") {
+				volts = rawValue // For the batteryMap to work the key needs to be an int
+				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
+								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
+				def minVolts = 15
+				def maxVolts = 28
 
-			if (volts < minVolts)
-				volts = minVolts
-			else if (volts > maxVolts)
-				volts = maxVolts
-			def pct = batteryMap[volts]
-			result.value = pct
-		} else {
-			def minVolts = 2.1
-			def maxVolts = 3.0
-			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			if (roundedPct <= 0)
-				roundedPct = 1
-			result.value = Math.min(100, roundedPct)
+				if (volts < minVolts)
+					volts = minVolts
+				else if (volts > maxVolts)
+					volts = maxVolts
+				def pct = batteryMap[volts]
+				if (pct != null) {
+					result.value = pct
+                    def value = pct
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+				}
+			}
+			else {
+				def minVolts = 2.1
+				def maxVolts = 3.0
+				def pct = (volts - minVolts) / (maxVolts - minVolts)
+				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
+				result.value = Math.min(100, roundedPct)
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+			}
 		}
 	}
 
@@ -306,13 +303,19 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+
+	def enrollCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+	]
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
+	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -0,0 +1,313 @@
+/**
+ *  SmartSense Motion/Temp Sensor
+ *
+ *  Copyright 2014 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+//DEPRECATED - Using the smartsense-motion-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
+metadata {
+	definition (name: "SmartSense Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Motion Sensor"
+		capability "Configuration"
+		capability "Battery"
+        capability "Temperature Measurement"
+		capability "Refresh"
+		capability "Sensor"
+
+        command "enrollResponse"
+
+	}
+
+	simulator {
+		status "active": "zone report :: type: 19 value: 0031"
+		status "inactive": "zone report :: type: 19 value: 0030"
+	}
+
+	preferences {
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+			}
+		}
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+			)
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main(["motion", "temperature"])
+		details(["motion", "temperature", "battery", "refresh"])
+	}
+}
+
+def parse(String description) {
+	log.debug "description: $description"
+
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+    else if (description?.startsWith('zone status')) {
+	    map = parseIasMessage(description)
+    }
+
+	log.debug "Parse returned $map"
+	def result = map ? createEvent(map) : null
+
+    if (description?.startsWith('enroll request')) {
+    	List cmds = enrollResponse()
+        log.debug "enroll response: ${cmds}"
+        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+    }
+    return result
+}
+
+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+            	resultMap = getBatteryResult(cluster.data.last())
+                break
+
+            case 0x0402:
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
+
+			case 0x0406:
+            	log.debug 'motion'
+                resultMap.name = 'motion'
+                break
+        }
+    }
+
+    return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+        cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+    else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
+    	def value = descMap.value.endsWith("01") ? "active" : "inactive"
+    	resultMap = getMotionResult(value)
+    }
+
+	return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
+
+private Map parseIasMessage(String description) {
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
+}
+
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return celsius
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
+}
+
+private Map getBatteryResult(rawValue) {
+	log.debug 'Battery'
+	def linkText = getLinkText(device)
+
+	log.debug rawValue
+
+	def result = [
+		name: 'battery',
+		value: '--'
+	]
+
+	def volts = rawValue / 10
+	def descriptionText
+
+    if (rawValue == 0 || rawValue == 255) {}
+	else {
+		if (volts > 3.5) {
+			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+		}
+		else if (volts > 0){
+			def minVolts = 2.1
+			def maxVolts = 3.0
+			def pct = (volts - minVolts) / (maxVolts - minVolts)
+			def roundedPct = Math.round(pct * 100)
+			if (roundedPct <= 0)
+				roundedPct = 1
+			result.value = Math.min(100, roundedPct)
+			result.descriptionText = "${linkText} battery was ${result.value}%"
+		}
+	}
+
+	return result
+}
+
+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	def linkText = getLinkText(device)
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		unit: temperatureScale
+	]
+}
+
+private Map getMotionResult(value) {
+	log.debug 'motion'
+	String linkText = getLinkText(device)
+	String descriptionText = value == 'active' ? "${linkText} detected motion" : "${linkText} motion has stopped"
+	return [
+		name: 'motion',
+		value: value,
+		descriptionText: descriptionText
+	]
+}
+
+def refresh() {
+	log.debug "refresh called"
+	def refreshCmds = [
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+	]
+
+	return refreshCmds + enrollResponse()
+}
+
+def configure() {
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+
+	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+	]
+    return configCmds + refresh() // send refresh cmds as part of config
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+    ]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}

devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy

@@ -44,7 +44,7 @@ metadata {
 }
 
 def parse(String description) {
-	def results = [:]
+	def results
 	if (isZoneType19(description) || !isSupportedDescription(description)) {
 		results = parseBasicMessage(description)
 	}
@@ -57,24 +57,21 @@ def parse(String description) {
 
 private Map parseBasicMessage(description) {
 	def name = parseName(description)
-	def results = [:]
-	if (name != null) {
-		def value = parseValue(description)
-		def linkText = getLinkText(device)
-		def descriptionText = parseDescriptionText(linkText, value, description)
-		def handlerName = value
-		def isStateChange = isStateChange(device, name, value)
+	def value = parseValue(description)
+	def linkText = getLinkText(device)
+	def descriptionText = parseDescriptionText(linkText, value, description)
+	def handlerName = value
+	def isStateChange = isStateChange(device, name, value)
 
-		results = [
-				name           : name,
-				value          : value,
-				linkText       : linkText,
-				descriptionText: descriptionText,
-				handlerName    : handlerName,
-				isStateChange  : isStateChange,
-				displayed      : displayed(description, isStateChange)
-		]
-	}
+	def results = [
+		name: name,
+		value: value,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: handlerName,
+		isStateChange: isStateChange,
+		displayed: displayed(description, isStateChange)
+	]
 	log.debug "Parse returned $results.descriptionText"
 	return results
 }

devicetypes/smartthings/smartsense-multi-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Smartsense Multi Sensor
 
-Local Execution on V2 Hubs
+
 
 Works with: 
 
@@ -26,11 +26,10 @@ Works with:
 
 ## Device Health
 
-SmartSense Multi sensor with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
-* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
+A Category C2 multi sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 
 		capability "Three Axis"
 		capability "Battery"
@@ -127,7 +127,7 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
-	def result = map ? createEvent(map) : [:]
+	def result = map ? createEvent(map) : null
 
 	if (description?.startsWith('enroll request')) {
 		List cmds = enrollResponse()
@@ -147,33 +147,20 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+			resultMap = getBatteryResult(cluster.data.last())
 			break
 
 			case 0xFC02:
-				log.debug 'ACCELERATION'
+			log.debug 'ACCELERATION'
 			break
 
 			case 0x0402:
-				if (cluster.command == 0x07) {
-					if(cluster.data[0] == 0x00) {
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
-			break
+			log.debug 'TEMP'
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
+				break
 		}
 	}
 
@@ -182,8 +169,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 	cluster.command == 0x0B ||
+	cluster.command == 0x07 ||
 	(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -272,44 +261,56 @@ def updated() {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return Math.round(celsius)
+		return celsius
 		} else {
-			return Math.round(celsiusToFahrenheit(celsius))
+			return celsiusToFahrenheit(celsius) as Integer
 		}
 	}
 
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 
-	def result = [:]
+	def result = [
+		name: 'battery',
+		value: '--',
+		translatable: true
+	]
 
 	def volts = rawValue / 10
 
-	if (!(rawValue == 0 || rawValue == 255)) {
-		result.name = 'battery'
-		result.translatable = true
-		result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-		if (device.getDataValue("manufacturer") == "SmartThings") {
-			volts = rawValue // For the batteryMap to work the key needs to be an int
-			def batteryMap = [28: 100, 27: 100, 26: 100, 25: 90, 24: 90, 23: 70,
-							  22: 70, 21: 50, 20: 50, 19: 30, 18: 30, 17: 15, 16: 1, 15: 0]
-			def minVolts = 15
-			def maxVolts = 28
+	if (rawValue == 0 || rawValue == 255) {}
+	else {
+		if (volts > 3.5) {
+			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
+		}
+		else {
+			if (device.getDataValue("manufacturer") == "SmartThings") {
+				volts = rawValue // For the batteryMap to work the key needs to be an int
+				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
+								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
+				def minVolts = 15
+				def maxVolts = 28
 
-			if (volts < minVolts)
-				volts = minVolts
-			else if (volts > maxVolts)
-				volts = maxVolts
-			def pct = batteryMap[volts]
-			result.value = pct
-		} else {
-			def minVolts = 2.1
-			def maxVolts = 3.0
-			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			if (roundedPct <= 0)
-				roundedPct = 1
-			result.value = Math.min(100, roundedPct)
+				if (volts < minVolts)
+					volts = minVolts
+				else if (volts > maxVolts)
+					volts = maxVolts
+				def pct = batteryMap[volts]
+				if (pct != null) {
+					result.value = pct
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+				}
+			}
+			else {
+				def minVolts = 2.1
+				def maxVolts = 3.0
+				def pct = (volts - minVolts) / (maxVolts - minVolts)
+				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
+				result.value = Math.min(100, roundedPct)
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+			}
 		}
 	}
 
@@ -400,22 +401,22 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting"
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	def configCmds = zigbee.batteryConfig() +
+	def configCmds = enrollResponse() +
+			zigbee.batteryConfig() +
 			zigbee.temperatureConfig(30, 300) +
 			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
 
-	return refresh() + configCmds
+	return configCmds + refresh()
 }
 
 private getEndpointId() {

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -0,0 +1,338 @@
+/**
+ *  SmartSense Open/Closed Accelerometer Sensor
+ *
+ *  Copyright 2014 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+//DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
+ metadata {
+ 	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+ 		capability "Battery"
+ 		capability "Configuration"
+ 		capability "Contact Sensor"
+ 		capability "Acceleration Sensor"
+ 		capability "Refresh"
+ 		capability "Temperature Measurement"
+		capability "Health Check"
+		capability "Sensor"
+
+		command "enrollResponse"
+ 	}
+
+ 	simulator {
+
+ 	}
+
+ 	preferences {
+ 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+ 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+ 	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+			}
+		}
+		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
+			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
+		}
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main (["contact", "acceleration", "temperature"])
+		details(["contact", "acceleration", "temperature", "battery", "refresh"])
+	}
+ }
+
+ def parse(String description) {
+ 	log.debug "description: $description"
+
+ 	Map map = [:]
+ 	if (description?.startsWith('catchall:')) {
+ 		map = parseCatchAllMessage(description)
+ 	}
+ 	else if (description?.startsWith('read attr -')) {
+ 		map = parseReportAttributeMessage(description)
+ 	}
+ 	else if (description?.startsWith('temperature: ')) {
+ 		map = parseCustomMessage(description)
+ 	}
+ 	else if (description?.startsWith('zone status')) {
+ 		map = parseIasMessage(description)
+ 	}
+
+ 	log.debug "Parse returned $map"
+ 	def result = map ? createEvent(map) : null
+
+ 	if (description?.startsWith('enroll request')) {
+ 		List cmds = enrollResponse()
+ 		log.debug "enroll response: ${cmds}"
+ 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+ 	}
+ 	return result
+ }
+
+ private Map parseCatchAllMessage(String description) {
+ 	Map resultMap = [:]
+ 	def cluster = zigbee.parse(description)
+ 	if (shouldProcessMessage(cluster)) {
+ 		switch(cluster.clusterId) {
+ 			case 0x0001:
+ 			resultMap = getBatteryResult(cluster.data.last())
+ 			break
+
+ 			case 0xFC02:
+ 			break
+
+ 			case 0x0402:
+ 			log.debug 'TEMP'
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
+            }
+        }
+
+        return resultMap
+    }
+
+    private boolean shouldProcessMessage(cluster) {
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    cluster.command == 0x0B ||
+    cluster.command == 0x07 ||
+    (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
+}
+
+private int getHumidity(value) {
+	return Math.round(Double.parseDouble(value))
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "FC02" && descMap.attrId == "0002") {
+		Integer.parseInt(descMap.value,8)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+
+	return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
+
+private Map parseIasMessage(String description) {
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
+}
+
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return celsius
+		} else {
+			return celsiusToFahrenheit(celsius) as Integer
+		}
+	}
+
+	private Map getBatteryResult(rawValue) {
+		log.debug 'Battery'
+		def linkText = getLinkText(device)
+
+		def result = [
+		name: 'battery'
+		]
+
+		def volts = rawValue / 10
+		def descriptionText
+        if (rawValue == 0 || rawValue == 255) {}
+		else if (volts > 3.5) {
+			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+		}
+		else {
+			def minVolts = 2.1
+			def maxVolts = 3.0
+			def pct = (volts - minVolts) / (maxVolts - minVolts)
+			def roundedPct = Math.round(pct * 100)
+	        if (roundedPct <= 0)
+		        roundedPct = 1
+			result.value = Math.min(100, roundedPct)
+			result.descriptionText = "${linkText} battery was ${result.value}%"
+		}
+
+		return result
+	}
+
+	private Map getTemperatureResult(value) {
+		log.debug 'TEMP'
+		def linkText = getLinkText(device)
+		if (tempOffset) {
+			def offset = tempOffset as int
+			def v = value as int
+			value = v + offset
+		}
+		def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+		return [
+			name: 'temperature',
+			value: value,
+			descriptionText: descriptionText,
+			unit: temperatureScale
+		]
+	}
+
+	private Map getContactResult(value) {
+		log.debug 'Contact Status'
+		def linkText = getLinkText(device)
+		def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
+		return [
+		name: 'contact',
+		value: value,
+		descriptionText: descriptionText
+		]
+	}
+
+	private getAccelerationResult(numValue) {
+		def name = "acceleration"
+		def value = numValue.endsWith("1") ? "active" : "inactive"
+		//def linkText = getLinkText(device)
+		def descriptionText = "$linkText was $value"
+		def isStateChange = isStateChange(device, name, value)
+		[
+			name: name,
+			value: value,
+			//unit: null,
+			//linkText: linkText,
+			descriptionText: descriptionText,
+			//handlerName: value,
+			isStateChange: isStateChange
+		//	displayed: displayed(description, isStateChange)
+		]
+	}
+
+	def refresh() {
+		log.debug "Refreshing Temperature and Battery "
+		def refreshCmds = [
+
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		//"st rattr 0x${device.deviceNetworkId} 1 0xFC02 2", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+
+		]
+
+		return refreshCmds + enrollResponse()
+	}
+
+def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0xFC02 2 0x18 30 3600 {01}",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+	]
+	return configCmds + refresh() // send refresh cmds as part of config
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
+}

devicetypes/smartthings/smartsense-open-closed-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Smartsense Open/Closed Sensor
 
-Local Execution on V2 Hubs
+
 
 Works with: 
 
@@ -24,11 +24,10 @@ Works with:
 
 ## Device Health
 
-SmartSense Open Closed sensor with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
-* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
+A Category C2 open/closed sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
@@ -93,7 +93,7 @@ def parse(String description) {
     }
 
 	log.debug "Parse returned $map"
-	def result = map ? createEvent(map) : [:]
+	def result = map ? createEvent(map) : null
 
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
@@ -109,28 +109,15 @@ private Map parseCatchAllMessage(String description) {
     if (shouldProcessMessage(cluster)) {
         switch(cluster.clusterId) {
             case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+            	resultMap = getBatteryResult(cluster.data.last())
                 break
 
             case 0x0402:
-				if (cluster.command == 0x07){
-					if (cluster.data[0] == 0x00) {
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
+                log.debug 'TEMP'
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
                 break
         }
     }
@@ -140,8 +127,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
+    // 0x07 is bind message
     boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
@@ -196,19 +185,25 @@ private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
 
-    def result = [:]
+    def result = [
+    	name: 'battery'
+    ]
 
 	def volts = rawValue / 10
-	if (!(rawValue == 0 || rawValue == 255)) {
+	def descriptionText
+    if (rawValue == 0 || rawValue == 255) {}
+    else if (volts > 3.5) {
+		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+	}
+	else {
 		def minVolts = 2.1
-		def maxVolts = 3.0
+    	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
 	    if (roundedPct <= 0)
 		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
-		result.name = 'battery'
 	}
 
 	return result
@@ -260,15 +255,19 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	def enrollCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+	]
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-    return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
+    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/README.md

@@ -1,6 +1,6 @@
 # SmartSense Temp/Humidity Sensor
 
-Local Execution on V2 Hubs
+
 
 Works with: 
 
@@ -24,11 +24,10 @@ Works with:
 
 ## Device Health
 
-SmartSense Temp/Humidity Sensor with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
-* HubV2 AppEngine 1.5.1 - __12min__ checkIntervalr 5 min interval is confirmed
+A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -84,7 +84,7 @@ def parse(String description) {
 	}
 
 	log.debug "Parse returned $map"
-	return map ? createEvent(map) : [:]
+	return map ? createEvent(map) : null
 }
 
 private Map parseCatchAllMessage(String description) {
@@ -93,37 +93,20 @@ private Map parseCatchAllMessage(String description) {
     if (shouldProcessMessage(cluster)) {
         switch(cluster.clusterId) {
             case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+            	resultMap = getBatteryResult(cluster.data.last())
                 break
 
             case 0x0402:
-				if (cluster.command == 0x07) {
-					if (cluster.data[0] == 0x00){
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
-				break
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
 
 			case 0xFC45:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					String pctStr = cluster.data[-1, -2].collect { Integer.toHexString(it) }.join('')
-					String display = Math.round(Integer.valueOf(pctStr, 16) / 100)
-					resultMap = getHumidityResult(display)
-				}
+                String pctStr = cluster.data[-1, -2].collect { Integer.toHexString(it) }.join('')
+                String display = Math.round(Integer.valueOf(pctStr, 16) / 100)
+                resultMap = getHumidityResult(display)
                 break
         }
     }
@@ -133,8 +116,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
+    // 0x07 is bind message
     boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
@@ -207,20 +192,25 @@ private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
 
-    def result = [:]
+    def result = [
+    	name: 'battery'
+    ]
 
 	def volts = rawValue / 10
-	if (!(rawValue == 0 || rawValue == 255)) {
+	def descriptionText
+    if (rawValue == 0 || rawValue == 255) {}
+    else if (volts > 3.5) {
+		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+	}
+	else {
 		def minVolts = 2.1
-		def maxVolts = 3.0
+    	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
-		if (roundedPct <= 0)
-			roundedPct = 1
+	    if (roundedPct <= 0)
+		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
-		result.name = 'battery'
-
 	}
 
 	return result
@@ -245,7 +235,11 @@ private Map getTemperatureResult(value) {
 
 private Map getHumidityResult(value) {
 	log.debug 'Humidity'
-	return value ? [name: 'humidity', value: value, unit: '%'] : [:]
+	return [
+		name: 'humidity',
+		value: value,
+		unit: '%'
+	]
 }
 
 /**
@@ -258,15 +252,20 @@ def ping() {
 def refresh()
 {
 	log.debug "refresh temperature, humidity, and battery"
-	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
-			zigbee.readAttribute(0x0402, 0x0000) +
-			zigbee.readAttribute(0x0001, 0x0020)
+	[
+
+		"zcl mfg-code 0xC2DF", "delay 1000",
+		"zcl global read 0xFC45 0", "delay 1000",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 1000",
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+        "st rattr 0x${device.deviceNetworkId} 1 1 0x20"
+
+	]
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting and Bindings."
 	def humidityConfigCmds = [
@@ -277,7 +276,7 @@ def configure() {
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300)  // send refresh cmds as part of config
+	return humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) +  refresh() // send refresh cmds as part of config
 }
 
 private hex(value) {

devicetypes/smartthings/testing/simulated-minimote.src/simulated-minimote.groovy

@@ -15,10 +15,9 @@ metadata {
 	definition (name: "Simulated Minimote", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Actuator"
 		capability "Button"
-		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
-
+        
         command "push1"
         command "push2"
         command "push3"
@@ -46,42 +45,42 @@ metadata {
 		}
  		standardTile("push1", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Push 1", backgroundColor: "#ffffff", action: "push1"
-		}
+		} 
  		standardTile("push2", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Push 2", backgroundColor: "#ffffff", action: "push2"
-		}
+		} 
  		standardTile("push3", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Push 3", backgroundColor: "#ffffff", action: "push3"
-		}
+		} 
  		standardTile("push4", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Push 4", backgroundColor: "#ffffff", action: "push4"
-		}
+		} 
  		standardTile("dummy1", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: " ", backgroundColor: "#ffffff", action: "push4"
-		}
+		}         
  		standardTile("hold1", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Hold 1", backgroundColor: "#ffffff", action: "hold1"
-		}
+		}          
  		standardTile("hold2", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Hold 2", backgroundColor: "#ffffff", action: "hold2"
-		}
+		}          
  		standardTile("dummy2", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: " ", backgroundColor: "#ffffff", action: "push4"
-		}
+		}         
  		standardTile("hold3", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Hold 3", backgroundColor: "#ffffff", action: "hold3"
-		}
+		}          
  		standardTile("hold4", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Hold 4", backgroundColor: "#ffffff", action: "hold4"
-		}
-
+		}          
+        
 		main "button"
 		details(["push1","push2","button","push3","push4","dummy1","hold1","hold2","dummy2","hold3","hold4"])
 	}
 }
 
 def parse(String description) {
-
+	
 }
 
 def push1() {
@@ -126,15 +125,3 @@ private hold(button) {
 	sendEvent(name: "button", value: "held", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was held", isStateChange: true)
 }
 
-
-def installed() {
-	initialize()
-}
-
-def updated() {
-	initialize()
-}
-
-def initialize() {
-	sendEvent(name: "numberOfButtons", value: 4)
-}

devicetypes/smartthings/tyco-door-window-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/tyco-door-window-sensor.src/README.md

@@ -1,43 +0,0 @@
-# Tyco Door Window Sensor
-
-Cloud Execution
-
-Works with: 
-
-* [Tyco Door Window Sensor](https://support.smartthings.com/hc/en-us/articles/204834100-Tyco-Door-Window-Sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-
-## Capabilities
-
-* **Battery** - defines device uses a battery
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Contact Sensor** - can detect contact (open/close)
-* **Refresh** - _refresh()_ command for status updates
-* **Temperature Measurement** - can measure the device temperature
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Tyco Door Window Sensor with reporting interval of 5 mins.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-
-* __12min__ checkInterval
-
-## Battery Specification
-
-3V CR2032 battery is required.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that either the sensor needs to be reseted or the sensor is out of range.
-Reset needs to be done by inserting the battery in the sensor and then quickly pressing the adjacent black button 10 times. Pairing should be tried again now.
-It may happen that sensor is out of range, then pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
-for the different models:
-* [Tyco Door Window Sensor (MCT-340)](https://support.smartthings.com/hc/en-us/articles/204834100-Tyco-Door-Window-Sensor)

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -22,7 +22,6 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-		capability "Health Check"
 
 		command "enrollResponse"
 
@@ -181,17 +180,22 @@ private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
 
-    def result = [:]
+    def result = [
+    	name: 'battery'
+    ]
 
-	if (!(rawValue == 0 || rawValue == 255)) {
-		def volts = rawValue / 10
+	def volts = rawValue / 10
+	def descriptionText
+	if (volts > 3.5) {
+		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+	}
+	else {
 		def minVolts = 2.1
-		def maxVolts = 3.0
+    	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
-		result.name = 'battery'
 	}
 
 	return result
@@ -225,42 +229,44 @@ private Map getContactResult(value) {
 	]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x0402, 0x0000) // Read the Temperature Cluster
-}
-
 def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
-	def refreshCmds = [
+	[
 
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
 	]
-
-	return refreshCmds + enrollResponse()
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def enrollCmds = [
+	def configCmds = [
     	"delay 1000",
 
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
 
+        "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
+
+        "delay 500"
 	]
-    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
+    return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -19,7 +19,6 @@ metadata {
         capability "Actuator"
         capability "Battery"
         capability "Button"
-        capability "Holdable Button"        
         capability "Configuration"
         capability "Refresh"
         capability "Sensor"
@@ -90,8 +89,14 @@ def parse(String description) {
 }
 
 private Map parseIasButtonMessage(String description) {
-    def zs = zigbee.parseZoneStatus(description)
-    return zs.isAlarm2Set() ? getButtonResult("press") : getButtonResult("release")
+    int zoneInt = Integer.parseInt((description - "zone status 0x"), 16)
+    if (zoneInt & 0x02) {
+        resultMap = getButtonResult('press')
+    } else {
+        resultMap = getButtonResult('release')
+    }
+
+    return resultMap
 }
 
 private Map getBatteryResult(rawValue) {

devicetypes/smartthings/zigbee-dimmer-power.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zigbee-dimmer-power.src/README.md

@@ -1,41 +0,0 @@
-# GE Plug-In/In-Wall Smart Dimmer (ZigBee)
-
-Cloud Execution
-
-Works with:
-
-* [GE In-Wall Smart Dimmer (ZigBee)](https://shop.smartthings.com/#!/products/ge-in-wall-smart-dimmer-switch)
-* [GE Plug-In Smart Dimmer (ZigBee)](https://www.smartthings.com/works-with-smartthings/ge/ge-plug-in-smart-dimmer-zigbee)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#Troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Refresh** - _refresh()_ command for status updates
-* **Power Meter** - ability to check the power meter(energy consumption) of device
-* **Sensor** - represents the device sensor capability
-* **Switch** - can detect state (possible values: on/off)
-* **Switch Level** - represents current light level, usually 0-100 in percent
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-A Zigbee Power Dimmer with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* __12min__ checkInterval
-
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [GE Z-Wave In-Wall Smart Dimmer (GE 45857) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204988564-GE-In-Wall-Smart-Dimmer-45857GE-ZigBee-)
-* [GE Zigbee Plug-in Smart Dimmer (GE 45852) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205239280-GE-Plug-In-Smart-Dimmer-45852GE-ZigBee-)

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -21,7 +21,6 @@ metadata {
         capability "Sensor"
         capability "Switch"
         capability "Switch Level"
-        capability "Health Check"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702"
@@ -71,20 +70,8 @@ def parse(String description) {
         }
     }
     else {
-        def cluster = zigbee.parse(description)
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00){
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug zigbee.parseDescriptionAsMap(description)
-        }
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
     }
 }
 
@@ -100,22 +87,11 @@ def setLevel(value) {
     zigbee.setLevel(value)
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return zigbee.onOffRefresh()
-}
-
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-
-    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-    refresh()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh()
 }

devicetypes/smartthings/zigbee-dimmer.src/README.md

@@ -1,11 +1,10 @@
-# Zigbee Dimmer
+# OSRAM Lightify LED On/Off/Dim
+
 
-Cloud Execution
 
 Works with: 
 
 * [OSRAM Lightify LED On/Off/Dim](https://shop.smartthings.com/#!/products/osram-led-smart-bulb-on-off-dim)
-* [WeMo LED Bulb](https://support.smartthings.com/hc/en-us/articles/204259040-Belkin-WeMo-LED-Bulb-F7C033-)
 
 ## Table of contents
 
@@ -24,16 +23,14 @@ Works with:
 
 ## Device Health
 
-ZigBee Dimmer with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* __12min__ checkInterval
-
+A Category C1 Zigbee dimmer with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
 ## Troubleshooting
 
 If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
 Pairing needs to be tried again by placing the device closer to the hub.
 Other troubleshooting tips are listed as follows:
-* [OSRAM Lightify LED On/Off/Dim Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/207191763-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-On-Off-Dim)
-* [WeMo LED Bulb Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/204259040-Belkin-WeMo-LED-Bulb-F7C033-)
+* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/207191763-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-On-Off-Dim)

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", category: "C1") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"
@@ -60,21 +60,8 @@ def parse(String description) {
         }
     }
     else {
-        def cluster = zigbee.parse(description)
-
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
-        }
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
     }
 }
 
@@ -97,15 +84,13 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-hue-bulb.src/zigbee-hue-bulb.groovy

@@ -0,0 +1,243 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+//@Deprecated - Moved to zll-rgbw-bulb
+
+/* Philips Hue (via Zigbee)
+
+Capabilities:
+  Actuator
+  Color Control
+  Configuration
+  Polling
+  Refresh
+  Sensor
+  Switch
+  Switch Level
+
+Custom Commands:
+  setAdjustedColor
+
+*/
+
+metadata {
+	definition (name: "Zigbee Hue Bulb", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Color Control"
+		capability "Switch"
+		capability "Configuration"
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+
+		command "setAdjustedColor"
+
+		//fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000", outClusters: "0019"
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	// UI tile definitions
+	tiles {
+		standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+		}
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
+			state "color", action:"setAdjustedColor"
+		}
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+			state "level", label: 'Level ${currentValue}%'
+		}
+		controlTile("saturationSliderControl", "device.saturation", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "saturation", action:"color control.setSaturation"
+		}
+		valueTile("saturation", "device.saturation", inactiveLabel: false, decoration: "flat") {
+			state "saturation", label: 'Sat ${currentValue}    '
+		}
+		controlTile("hueSliderControl", "device.hue", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "hue", action:"color control.setHue"
+		}
+
+		main(["switch"])
+		details(["switch", "levelSliderControl", "rgbSelector", "refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	//log.trace description
+	if (description?.startsWith("catchall:")) {
+		def msg = zigbee.parse(description)
+		//log.trace msg
+		//log.trace "data: $msg.data"
+	}
+	else {
+		def name = description?.startsWith("on/off: ") ? "switch" : null
+		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
+		def result = createEvent(name: name, value: value)
+		log.debug "Parse returned ${result?.descriptionText}"
+		return result
+	}
+}
+
+def on() {
+	// just assume it works for now
+	log.debug "on()"
+	sendEvent(name: "switch", value: "on")
+	"st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
+}
+
+def off() {
+	// just assume it works for now
+	log.debug "off()"
+	sendEvent(name: "switch", value: "off")
+	"st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+}
+
+def setHue(value) {
+	def max = 0xfe
+	log.trace "setHue($value)"
+	sendEvent(name: "hue", value: value)
+	def scaledValue = Math.round(value * max / 100.0)
+	def cmd = "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x00 {${hex(scaledValue)} 00 0000}"
+	//log.info cmd
+	cmd
+}
+
+def setAdjustedColor(value) {
+	log.debug "setAdjustedColor: ${value}"
+	def adjusted = value + [:]
+	adjusted.hue = adjustOutgoingHue(value.hue)
+	adjusted.level = null // needed because color picker always sends 100
+	setColor(adjusted)
+}
+
+def setColor(value){
+	log.trace "setColor($value)"
+	def max = 0xfe
+
+	sendEvent(name: "hue", value: value.hue)
+	sendEvent(name: "saturation", value: value.saturation)
+	def scaledHueValue = Math.round(value.hue * max / 100.0)
+	def scaledSatValue = Math.round(value.saturation * max / 100.0)
+
+	def cmd = []
+	if (value.switch != "off" && device.latestValue("switch") == "off") {
+		cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
+		cmd << "delay 150"
+	}
+
+	cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x00 {${hex(scaledHueValue)} 00 0000}"
+	cmd << "delay 150"
+	cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x03 {${hex(scaledSatValue)} 0000}"
+
+	if (value.level != null) {
+		cmd << "delay 150"
+		cmd.addAll(setLevel(value.level))
+	}
+
+	if (value.switch == "off") {
+		cmd << "delay 150"
+		cmd << off()
+	}
+	log.info cmd
+	cmd
+}
+
+def setSaturation(value) {
+	def max = 0xfe
+	log.trace "setSaturation($value)"
+	sendEvent(name: "saturation", value: value)
+	def scaledValue = Math.round(value * max / 100.0)
+	def cmd = "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x03 {${hex(scaledValue)} 0000}"
+	//log.info cmd
+	cmd
+}
+
+def refresh() {
+	"st rattr 0x${device.deviceNetworkId} 1 6 0"
+}
+
+def poll(){
+	log.debug "Poll is calling refresh"
+	refresh()
+}
+
+def setLevel(value) {
+	log.trace "setLevel($value)"
+	def cmds = []
+
+	if (value == 0) {
+		sendEvent(name: "switch", value: "off")
+		cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+	}
+	else if (device.latestValue("switch") == "off") {
+		sendEvent(name: "switch", value: "on")
+	}
+
+	sendEvent(name: "level", value: value)
+    def level = hexString(Math.round(value * 255/100))
+	cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
+
+	//log.debug cmds
+	cmds
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}
+
+private adjustOutgoingHue(percent) {
+	def adjusted = percent
+	if (percent > 31) {
+		if (percent < 63.0) {
+			adjusted = percent + (7 * (percent -30 ) / 32)
+		}
+		else if (percent < 73.0) {
+			adjusted = 69 + (5 * (percent - 62) / 10)
+		}
+		else {
+			adjusted = percent + (2 * (100 - percent) / 28)
+		}
+	}
+	log.info "percent: $percent, adjusted: $adjusted"
+	adjusted
+}

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -31,8 +31,7 @@
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
-	fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
-	}
+    }
 
     tiles(scale: 2) {
 		multiAttributeTile(name:"toggle", type:"generic", width:6, height:4){
@@ -90,7 +89,7 @@ def configure() {
         zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING,
                                   TYPE_U8, 600, 21600, 0x01)
     log.info "configure() --- cmds: $cmds"
-    return refresh() + cmds // send refresh cmds as part of config
+    return cmds + refresh() // send refresh cmds as part of config
 }
 
 def refresh() {

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -1,154 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Author: SmartThings
- *  Date: 2016-01-19
- *
- *  This DTH should serve as the generic DTH to handle RGB ZigBee HA devices (For color bulbs with no color temperature)
- */
-
-metadata {
-	definition (name: "ZigBee RGB Bulb", namespace: "smartthings", author: "SmartThings") {
-
-		capability "Actuator"
-		capability "Color Control"
-		capability "Configuration"
-		capability "Polling"
-		capability "Refresh"
-		capability "Switch"
-		capability "Switch Level"
-		capability "Health Check"
-
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
-	}
-
-	// UI tile definitions
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-			tileAttribute ("device.color", key: "COLOR_CONTROL") {
-				attributeState "color", action:"color control.setColor"
-			}
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main(["switch"])
-		details(["switch", "refresh"])
-	}
-}
-
-//Globals
-private getATTRIBUTE_HUE() { 0x0000 }
-private getATTRIBUTE_SATURATION() { 0x0001 }
-private getHUE_COMMAND() { 0x00 }
-private getSATURATION_COMMAND() { 0x03 }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	log.debug "description is $description"
-
-	def event = zigbee.getEvent(description)
-	if (event) {
-		log.debug event
-		if (event.name=="level" && event.value==0) {}
-		else {
-			sendEvent(event)
-		}
-	}
-	else {
-		def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-		def cluster = zigbee.parse(description)
-
-		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
-			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-				sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
-			}
-			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-				sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
-			}
-		}
-		else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-			if (cluster.data[0] == 0x00){
-				log.debug "ON/OFF REPORTING CONFIG RESPONSE: $cluster"
-				sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-			}
-			else {
-				log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-			}
-		}
-		else {
-			log.info "DID NOT PARSE MESSAGE for description : $description"
-			log.debug zigbeeMap
-		}
-	}
-}
-
-def on() {
-	zigbee.on()
-}
-
-def off() {
-	zigbee.off()
-}
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.onOffRefresh()
-}
-
-def refresh() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
-}
-
-def configure() {
-	log.debug "Configuring Reporting and Bindings."
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
-	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
-}
-
-def setLevel(value) {
-	zigbee.setLevel(value)
-}
-
-def setColor(value){
-	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + "delay 500" + setSaturation(value.saturation)
-}
-
-def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
-}
-
-def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
-}

devicetypes/smartthings/zigbee-rgbw-bulb.src/README.md

@@ -1,6 +1,6 @@
 # OSRAM LIGHTIFY LED RGBW Bulb
 
-Cloud Execution
+
 
 Works with: 
 
@@ -27,10 +27,11 @@ Works with:
 
 ## Device Health
 
-OSRAM LIGHTIFY LED RGBW Bulb with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+A Category C6 OSRAM LIGHTIFY LED RGBW Bulb with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
-* __12min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings", category: "C6") {
 
         capability "Actuator"
         capability "Color Control"
@@ -95,7 +95,7 @@ def parse(String description) {
     }
     else {
         def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-        def cluster = zigbee.parse(description)
+        log.trace "zigbeeMap : $zigbeeMap"
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
@@ -107,18 +107,8 @@ def parse(String description) {
                 sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
             }
         }
-        else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00){
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
         else {
             log.info "DID NOT PARSE MESSAGE for description : $description"
-            log.debug zigbeeMap
         }
     }
 }
@@ -138,17 +128,15 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+    zigbee.onOffRefresh() + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh()
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
@@ -189,5 +177,5 @@ def setHue(value) {
 
 def setSaturation(value) {
     def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
 }

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -20,7 +20,6 @@ metadata {
         capability "Power Meter"
         capability "Sensor"
         capability "Switch"
-        capability "Health Check"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
@@ -78,28 +77,10 @@ def on() {
 }
 
 def refresh() {
-    Integer reportIntervalMinutes = 5
-    zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig(0,reportIntervalMinutes * 60) + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
+    zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
 }
 
 def configure() {
-    log.debug "in configure()"
-    return configureHealthCheck()
-}
-
-def configureHealthCheck() {
-    Integer hcIntervalMinutes = 12
-    sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-    return refresh()
-}
-
-def updated() {
-    log.debug "in updated()"
-    // updated() doesn't have it's return value processed as hub commands, so we have to send them explicitly
-    def cmds = configureHealthCheck()
-    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it)) }
-}
-
-def ping() {
-    return zigbee.onOffRefresh()
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig() + zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh()
 }

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -21,7 +21,6 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "000A", manufacturer: "HAI", model: "65A21-1", deviceJoinName: "Leviton Wireless Load Control Module-30amp"
     }
 
     // simulator metadata
@@ -79,5 +78,5 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffRefresh() + zigbee.onOffConfig()
+    zigbee.onOffConfig() + zigbee.onOffRefresh()
 }

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -134,5 +134,10 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    refresh()
+    zigbee.onOffConfig() +
+    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
+    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1) +
+    zigbee.onOffRefresh() +
+    zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
+    zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING)
 }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/README.md

@@ -1,11 +1,10 @@
-# ZigBee White Color Temperature Bulb
+# OSRAM Lightify Tunable 60 White
+
 
-Cloud Execution
 
 Works with: 
 
 * [OSRAM Lightify Tunable 60 White](http://www.osram.com/osram_com/tools-and-services/tools/lightify---smart-connected-light/lightify-for-home---what-is-light-to-you/lightify-products/lightify-classic-a60-tunable-white/index.jsp)
-* [OSRAM LIGHTIFY RT5/6 Tunable White](https://www.smartthings.com/works-with-smartthings/light-bulbs/osram-lightify-rt56-tunable-white)
 
 ## Table of contents
 
@@ -25,15 +24,14 @@ Works with:
 
 ## Device Health
 
-Zigbee Bulb with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-*__12min__ checkInterval
+A Category C1 OSRAM Lightify Tunable 60 White with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
 ## Troubleshooting
 
 If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
 Pairing needs to be tried again by placing the device closer to the hub.
 Other troubleshooting tips are listed as follows:
-* [OSRAM Lightify Tunable 60 White Troubleshooting](https://support.smartthings.com/hc/en-us/articles/204576454-OSRAM-LIGHTIFY-Tunable-White-60-Bulb)
-* [OSRAM LIGHTIFY RT5/6 Tunable White Troubleshooting](https://support.smartthings.com/hc/en-us/articles/214191863-How-to-connect-OSRAM-LIGHTIFY-Bulbs)
+* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/204576454-OSRAM-LIGHTIFY-Tunable-White-60-Bulb)

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings", category: "C1") {
 
         capability "Actuator"
         capability "Color Temperature"
@@ -37,7 +37,6 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "Z01-A19NAE26", deviceJoinName: "Sengled Element plus"
     }
 
     // UI tile definitions
@@ -84,21 +83,8 @@ def parse(String description) {
         }
     }
     else {
-        def cluster = zigbee.parse(description)
-
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
-        }
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
     }
 }
 
@@ -122,17 +108,15 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh()
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
 def setColorTemperature(value) {

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -11,9 +11,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import groovy.transform.Field
-
-@Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
     definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -24,7 +21,6 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
-        capability "Health Check"
 
         //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019"
@@ -100,38 +96,7 @@ def poll() {
     refresh()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return zigbee.levelRefresh()
-}
-
-def healthPoll() {
-    log.debug "healthPoll()"
-    def cmds = refresh()
-    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
-}
-
-def configureHealthCheck() {
-    Integer hcIntervalMinutes = 12
-    if (!hasConfiguredHealthCheck) {
-        log.debug "Configuring Health Check, Reporting"
-        unschedule("healthPoll")
-        runEvery5Minutes("healthPoll")
-        // Device-Watch allows 2 check-in misses from device
-        sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-        hasConfiguredHealthCheck = true
-    }
-}
-
 def configure() {
-    log.debug "configure()"
+    log.debug "Configuring Reporting and Bindings."
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
-    configureHealthCheck()
-}
-
-def updated() {
-    log.debug "updated()"
-    configureHealthCheck()
 }

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -1,134 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-metadata {
-	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings") {
-
-		capability "Actuator"
-		capability "Color Control"
-		capability "Configuration"
-		capability "Polling"
-		capability "Refresh"
-		capability "Switch"
-		capability "Switch Level"
-	}
-
-	// UI tile definitions
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-			tileAttribute ("device.color", key: "COLOR_CONTROL") {
-				attributeState "color", action:"color control.setColor"
-			}
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main(["switch"])
-		details(["switch", "refresh"])
-	}
-}
-
-//Globals
-private getATTRIBUTE_HUE() { 0x0000 }
-private getATTRIBUTE_SATURATION() { 0x0001 }
-private getHUE_COMMAND() { 0x00 }
-private getSATURATION_COMMAND() { 0x03 }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	log.debug "description is $description"
-
-	def finalResult = zigbee.getEvent(description)
-	if (finalResult) {
-		log.debug finalResult
-		sendEvent(finalResult)
-	}
-	else {
-		def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-		log.trace "zigbeeMap : $zigbeeMap"
-
-		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
-			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
-				sendEvent(name: "hue", value: hueValue, displayed:false)
-			}
-			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-				sendEvent(name: "saturation", value: saturationValue, displayed:false)
-			}
-		}
-		else {
-			log.info "DID NOT PARSE MESSAGE for description : $description"
-		}
-	}
-}
-
-def on() {
-	zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def off() {
-	zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def refresh() {
-	refreshAttributes() + configureAttributes()
-}
-
-def poll() {
-	refreshAttributes()
-}
-
-def configure() {
-	log.debug "Configuring Reporting and Bindings."
-	configureAttributes() + refreshAttributes()
-}
-
-def configureAttributes() {
-	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
-}
-
-def refreshAttributes() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
-}
-
-def setLevel(value) {
-	zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
-}
-
-def setColor(value){
-	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
-}
-
-def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)      //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
-}
-
-def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
-}

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -27,10 +27,6 @@ metadata {
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 RGBW"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "PAR 16 50 RGBW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY RGBW PAR 16 50"
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenpole RGBW-Lightify", deviceJoinName: "OSRAM LIGHTIFY Gardenpole RGBW"
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Outdoor Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Outdoor Flex RGBW"
     }
 
     // UI tile definitions
@@ -127,7 +123,7 @@ def configureAttributes() {
 }
 
 def refreshAttributes() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
@@ -145,10 +141,10 @@ def setColor(value){
 
 def setHue(value) {
     def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
 }
 
 def setSaturation(value) {
     def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
 }

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -11,9 +11,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import groovy.transform.Field
-
-@Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
     definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -25,14 +22,12 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
-        capability "Health Check"
 
         attribute "colorName", "string"
         command "setGenericName"
 
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"PAR16 50 TW", deviceJoinName: "OSRAM LIGHTIFY LED PAR16 50 Tunable White"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
     }
 
     // UI tile definitions
@@ -101,41 +96,9 @@ def poll() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return zigbee.levelRefresh()
-}
-
-def healthPoll() {
-    log.debug "healthPoll()"
-    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
-    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
-}
-
-def configureHealthCheck() {
-    Integer hcIntervalMinutes = 12
-    if (!hasConfiguredHealthCheck) {
-        log.debug "Configuring Health Check, Reporting"
-        unschedule("healthPoll")
-        runEvery5Minutes("healthPoll")
-        // Device-Watch allows 2 check-in misses from device
-        sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-        hasConfiguredHealthCheck = true
-    }
-}
-
 def configure() {
-    log.debug "configure()"
-    configureHealthCheck()
+    log.debug "Configuring Reporting and Bindings."
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-
-}
-
-def updated() {
-    log.debug "updated()"
-    configureHealthCheck()
 }
 
 def setColorTemperature(value) {

devicetypes/smartthings/zwave-dimmer-switch-generic.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zwave-dimmer-switch-generic.src/README.md

@@ -1,43 +0,0 @@
-# Z-wave Dimmer Switch Generic
-
-Cloud Execution
-
-Works with: 
-
-* [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-plug-in-lamp-dimmer-module)
-* [Leviton Universal Dimmer (DZMX1-LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-universal-dimmer)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Switch Level** - it's defined to accept two parameters, the level and the rate of dimming
-* **Actuator** - represents that a Device has commands
-* **Health Check** - indicates ability to get device health notifications
-* **Switch** - can detect state (possible values: on/off)
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-
-## Device Health
-
-Leviton Plug-in Lamp Dimmer Module (DZPA1-1LW) (Z-wave) and Leviton Universal Dimmer (DZMX1-LZ) (Z-Wave) are polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -15,15 +15,12 @@ metadata {
 	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings") {
 		capability "Switch Level"
 		capability "Actuator"
-		capability "Health Check"
 		capability "Switch"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
-		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
-		fingerprint mfr:"001D", prod:"1B03", model:"0334", deviceJoinName: "Leviton Universal Dimmer"
 	}
 
 	simulator {
@@ -71,11 +68,6 @@ metadata {
 	}
 }
 
-def updated(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
@@ -193,13 +185,6 @@ def poll() {
 	zwave.switchMultilevelV1.switchMultilevelGet().format()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
 	log.debug "refresh() is called"
 	def commands = []

devicetypes/smartthings/zwave-relay.src/zwave-relay.groovy

@@ -81,7 +81,7 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport
 	def value = "when off"
 	if (cmd.configurationValue[0] == 1) {value = "when on"}
 	if (cmd.configurationValue[0] == 2) {value = "never"}
-	[name: "indicatorStatus", value: value, displayed: false]
+	[name: "indicatorStatus", value: value, display: false]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {

devicetypes/smartthings/zwave-switch-generic.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zwave-switch-generic.src/README.md

@@ -1,45 +0,0 @@
-# Z-wave Switch
-
-Cloud Execution
-
-Works with: 
-
-* [Leviton Appliance Module (DZPA1-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-appliance-module)
-* [GE Plug-In Outdoor Smart Switch (GE 12720) (Z-Wave)](https://www.smartthings.com/works-with-smartthings/outlets/ge-plug-in-outdoor-smart-switch)
-* [Leviton Outlet (DZR15-1LZ)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-outlet)
-* [Leviton Switch (DZS15-1LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-switch)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Health Check** - indicates ability to get device health notifications
-* **Switch** - can detect state (possible values: on/off)
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-
-## Device Health
-
-Leviton Appliance Module (DZPA1-1LW), GE Plug-In Outdoor Smart Switch (GE 12720), Leviton Outlet (DZR15-1LZ) and Leviton Switch (DZS15-1LZ) (Z-Wave) are polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Leviton Appliance Module (DZPA1-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [GE Plug-In Outdoor Smart Switch (GE 12720) (Z-Wave) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200903080-GE-Plug-In-Outdoor-Smart-Switch-GE-12720-Z-Wave-)
-* [Leviton Outlet (DZR15-1LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton Switch (DZS15-1LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -14,17 +14,12 @@
 metadata {
 	definition (name: "Z-Wave Switch Generic", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
-		capability "Health Check"
  		capability "Switch"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
 		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
-		fingerprint mfr:"001D", prod:"1A02", model:"0334", deviceJoinName: "Leviton Appliance Module"
-		fingerprint mfr:"0063", prod:"4F50", model:"3031", deviceJoinName: "GE Plug-in Outdoor Switch"
-		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
-		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
 	}
 
 	// simulator metadata
@@ -55,11 +50,6 @@ metadata {
 	}
 }
 
-def updated(){
-// Device-Watch simply pings if no device events received for checkInterval duration of 32min = 2 * 15min + 2min lag time
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def parse(String description) {
 	def result = null
 	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
@@ -136,13 +126,6 @@ def poll() {
 	])
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
 	delayBetween([
 		zwave.switchBinaryV1.switchBinaryGet().format(),

devicetypes/smartthings/zwave-switch.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zwave-switch.src/README.md

@@ -1,51 +0,0 @@
-# Z-Wave Switch
-
-Local Execution on V2 Hubs
-
-Works with: 
-
-* [GE Z-Wave Plug-In Smart Switch (12719)](http://products.z-wavealliance.org/products/1193)
-* [GE Z-Wave In-Wall Smart Outlet (12721)](http://products.z-wavealliance.org/products/1195)
-* [GE Z-Wave In-Wall Smart Switch (12722)](http://products.z-wavealliance.org/products/1196)
-* [GE Z-Wave In-Wall Smart Toggle Switch (12727)](http://products.z-wavealliance.org/products/1200)
-
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#Troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Indicator** - gives you the ability to set the indicator LED light on a Z-Wave switch
-* **Switch** - can detect state (possible values: on/off)
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Z-Wave Switches (Plug-In, In-Wall(Toggle Switch, Switch, Outlet)) are polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [General Z-Wave Dimmer/Switch Troubleshooting](https://support.smartthings.com/hc/en-us/articles/200955890-Troubleshooting-GE-in-wall-switch-or-dimmer-won-t-respond-to-commands-or-automations-Z-Wave-)
-* [GE Z-Wave Plug-In Smart Switch (12719) Troubleshooting](https://support.smartthings.com/hc/en-us/articles/200903070-GE-Plug-In-Smart-Switch-GE-12719-Z-Wave)
-* [GE Z-Wave In-Wall Smart Outlet (12721) Troubleshooting](https://support.smartthings.com/hc/en-us/articles/200903020-GE-In-Wall-Smart-Outlet-GE-12721-Z-Wave)
-* [GE Z-Wave In-Wall Smart Switch (12722) Troubleshooting](https://support.smartthings.com/hc/en-us/articles/200902540-GE-In-Wall-Smart-Switch-GE-12722-Z-Wave)
-* [GE Z-Wave In-Wall Smart Toggle Switch (12727) Troubleshooting](https://support.smartthings.com/hc/en-us/articles/207568933-GE-In-Wall-Smart-Toggle-Switch-GE-12727-Z-Wave)
-
-

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -19,7 +19,6 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Health Check"
 
 		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
 		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
@@ -65,8 +64,6 @@ metadata {
 }
 
 def updated(){
-		// Device-Watch simply pings if no device events received for 32min(checkInterval)
-		sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
   switch (ledIndicator) {
         case "on":
             indicatorWhenOn()
@@ -114,7 +111,7 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport
 	def value = "when off"
 	if (cmd.configurationValue[0] == 1) {value = "when on"}
 	if (cmd.configurationValue[0] == 2) {value = "never"}
-	[name: "indicatorStatus", value: value, displayed: false]
+	[name: "indicatorStatus", value: value, display: false]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
@@ -159,13 +156,6 @@ def poll() {
 	])
 }
 
-/**
-  * PING is used by Device-Watch in attempt to reach the Device
-**/
-def ping() {
-		refresh()
-}
-
 def refresh() {
 	delayBetween([
 		zwave.switchBinaryV1.switchBinaryGet().format(),
@@ -174,17 +164,17 @@ def refresh() {
 }
 
 void indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on", displayed: false)
+	sendEvent(name: "indicatorStatus", value: "when on", display: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off", displayed: false)
+	sendEvent(name: "indicatorStatus", value: "when off", display: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never", displayed: false)
+	sendEvent(name: "indicatorStatus", value: "never", display: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
 }
 

smartapps/egid/smart-windows.src/smart-windows.groovy

@@ -1,7 +1,7 @@
 /**
  *  Smart Windows
  *	Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!).
- *
+ * 
  *  Copyright 2014 Eric Gideon
  *
  * 	Based in part on the "When it's going to rain" SmartApp by the SmartThings team,
@@ -21,18 +21,13 @@ definition(
 	name: "Smart Windows",
 	namespace: "egid",
 	author: "Eric Gideon",
-	description: "Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!). If you don't use an external temperature device, your location will be used instead.",
+	description: "Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!). If you don't use an external temperature device, your zipcode will be used instead.",
 	iconUrl: "https://s3.amazonaws.com/smartthings-device-icons/Home/home9-icn.png",
 	iconX2Url: "https://s3.amazonaws.com/smartthings-device-icons/Home/home9-icn@2x.png"
 )
 
 
 preferences {
-
-  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
-		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
-	}
-
 	section( "Set the temperature range for your comfort zone..." ) {
 		input "minTemp", "number", title: "Minimum temperature"
 		input "maxTemp", "number", title: "Maximum temperature"
@@ -44,11 +39,9 @@ preferences {
 		input "inTemp", "capability.temperatureMeasurement", title: "Indoor"
 		input "outTemp", "capability.temperatureMeasurement", title: "Outdoor (optional)", required: false
 	}
-
-	if (location.channelName != 'samsungtv') {
-		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
-  }
-
+	section( "Set your location" ) {
+		input "zipCode", "text", title: "Zip code"
+	}
 	section( "Notifications" ) {
 		input "sendPushMessage", "enum", title: "Send a push notification?", metadata:[values:["Yes","No"]], required:false
 		input "retryPeriod", "number", title: "Minutes between notifications:"
@@ -79,7 +72,7 @@ def temperatureHandler(evt) {
 
 	def currentInTemp = evt.doubleValue
 	def openWindows = sensors.findAll { it?.latestValue("contact") == 'open' }
-
+	
 	log.trace "Temp event: $evt"
 	log.info "In: $currentInTemp; Out: $currentOutTemp"
 
@@ -105,7 +98,7 @@ def temperatureHandler(evt) {
 			if ( currentOutTemp < maxTemp && !openWindows ) {
 				send( "Open some windows to cool down the house! Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )
 			} else if ( currentOutTemp > maxTemp && openWindows ) {
-				send( "It's gotten warmer outside! You should close these windows: ${openWindows.join(', ')}. Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )
+				send( "It's gotten warmer outside! You should close these windows: ${openWindows.join(', ')}. Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )				
 			} else {
 				log.debug "No notifications sent. Everything is in the right place."
 			}
@@ -132,11 +125,7 @@ def temperatureHandler(evt) {
 }
 
 def weatherCheck() {
-	def json 
-	if (location.channelName != 'samsungtv')
-		json = getWeatherFeature("conditions", zipCode)
-	else
-		json = getWeatherFeature("conditions")
+	def json = getWeatherFeature("conditions", zipCode)
 	def currentTemp = json?.current_observation?.temp_f
 
 	if ( currentTemp ) {
@@ -161,4 +150,4 @@ private send(msg) {
 	}
 
 	log.info msg
-}
+}

smartapps/erocm123/sonoff-connect.src/sonoff-connect.groovy

@@ -0,0 +1,348 @@
+/**
+ *  Copyright 2016 Eric Maycock
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Sonoff (Connect)
+ *
+ *  Author: Eric Maycock (erocm123)
+ *  Date: 2016-06-02
+ */
+
+definition(
+    name: "Sonoff (Connect)",
+    namespace: "erocm123",
+    author: "Eric Maycock (erocm123)",
+    description: "Service Manager for Sonoff switches",
+    category: "Convenience",
+    iconUrl:   "https://raw.githubusercontent.com/erocm123/SmartThingsPublic/master/smartapps/erocm123/sonoff-connect.src/sonoff-connect-icon.png",
+    iconX2Url: "https://raw.githubusercontent.com/erocm123/SmartThingsPublic/master/smartapps/erocm123/sonoff-connect.src/sonoff-connect-icon-2x.png",
+    iconX3Url: "https://raw.githubusercontent.com/erocm123/SmartThingsPublic/master/smartapps/erocm123/sonoff-connect.src/sonoff-connect-icon-3x.png"
+)
+
+preferences {
+	page(name: "mainPage")
+    page(name: "configurePDevice")
+    page(name: "deletePDevice")
+    page(name: "changeName")
+    page(name: "discoveryPage", title: "Device Discovery", content: "discoveryPage", refreshTimeout:5)
+    page(name: "addDevices", title: "Add Sonoff Switches", content: "addDevices")
+    page(name: "deviceDiscovery")
+}
+
+def mainPage() {
+	dynamicPage(name: "mainPage", title: "Manage your Sonoff switches", nextPage: null, uninstall: true, install: true) {
+        section("Configure"){
+           href "deviceDiscovery", title:"Discover Sonoff Devices", description:""
+        }
+        section("Installed Devices"){
+            getChildDevices().sort({ a, b -> a["deviceNetworkId"] <=> b["deviceNetworkId"] }).each {
+                href "configurePDevice", title:"$it.label", description:"", params: [did: it.deviceNetworkId]
+            }
+        }
+    }
+}
+
+def configurePDevice(params){
+   def currentDevice
+   getChildDevices().each {
+       if(it.deviceNetworkId == params.did){
+           state.currentDeviceId = it.deviceNetworkId
+           state.currentDisplayName = it.displayName
+       }      
+   }
+   dynamicPage(name: "configurePDevice", title: "Configure Sonoff Switches created with this app", nextPage: null) {
+		section {
+            app.updateSetting("${state.currentDeviceId}_label", getChildDevice(state.currentDeviceId).label)
+            input "${state.currentDeviceId}_label", "text", title:"Device Name", description: "", required: false
+            href "changeName", title:"Change Device Name", description: "Edit the name above and click here to change it", params: [did: state.currentDeviceId]
+        }
+        section {
+              href "deletePDevice", title:"Delete $state.currentDisplayName", description: "", params: [did: state.currentDeviceId]
+        }
+   }
+}
+
+def deletePDevice(params){
+    try {
+        unsubscribe()
+        getChildDevices().each {
+            if(it.deviceNetworkId.startsWith("${params.did}/")) deleteChildDevice(it.deviceNetworkId)
+        } 
+        deleteChildDevice(params.did)
+        dynamicPage(name: "deletePDevice", title: "Deletion Summary", nextPage: "mainPage") {
+            section {
+                paragraph "The device has been deleted. Press next to continue"
+            } 
+        }
+	} catch (e) {
+        dynamicPage(name: "deletePDevice", title: "Deletion Summary", nextPage: "mainPage") {
+            section {
+                paragraph "Error: ${(e as String).split(":")[1]}."
+            } 
+        }
+    }
+}
+
+def changeName(params){
+    def thisDevice = getChildDevice(params.did)
+    thisDevice.label = settings["${params.did}_label"]
+
+    dynamicPage(name: "changeName", title: "Change Name Summary", nextPage: "mainPage") {
+	    section {
+            paragraph "The device has been renamed. Press \"Next\" to continue"
+        }
+    }
+}
+
+def discoveryPage(){
+   return deviceDiscovery()
+}
+
+def deviceDiscovery(params=[:])
+{
+	def devices = devicesDiscovered()
+    
+	int deviceRefreshCount = !state.deviceRefreshCount ? 0 : state.deviceRefreshCount as int
+	state.deviceRefreshCount = deviceRefreshCount + 1
+	def refreshInterval = 3
+    
+	def options = devices ?: []
+	def numFound = options.size() ?: 0
+
+	if ((numFound == 0 && state.deviceRefreshCount > 25) || params.reset == "true") {
+    	log.trace "Cleaning old device memory"
+    	state.devices = [:]
+        state.deviceRefreshCount = 0
+        app.updateSetting("selectedDevice", "")
+    }
+
+	ssdpSubscribe()
+
+	//sonoff discovery request every 15 //25 seconds
+	if((deviceRefreshCount % 5) == 0) {
+		discoverDevices()
+	}
+
+	//setup.xml request every 3 seconds except on discoveries
+	if(((deviceRefreshCount % 3) == 0) && ((deviceRefreshCount % 5) != 0)) {
+		verifyDevices()
+	}
+
+	return dynamicPage(name:"deviceDiscovery", title:"Discovery Started!", nextPage:"addDevices", refreshInterval:refreshInterval, uninstall: true) {
+		section("Please wait while we discover your Sonoff devices. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
+			input "selectedDevices", "enum", required:false, title:"Select Sonoff Switch (${numFound} found)", multiple:true, options:options
+		}
+        section("Options") {
+			href "deviceDiscovery", title:"Reset list of discovered devices", description:"", params: ["reset": "true"]
+		}
+	}
+}
+
+Map devicesDiscovered() {
+	def vdevices = getVerifiedDevices()
+	def map = [:]
+	vdevices.each {
+		def value = "${it.value.name}"
+		def key = "${it.value.mac}"
+		map["${key}"] = value
+	}
+	map
+}
+
+def getVerifiedDevices() {
+	getDevices().findAll{ it?.value?.verified == true }
+}
+
+private discoverDevices() {
+	sendHubCommand(new physicalgraph.device.HubAction("lan discovery urn:schemas-upnp-org:device:Basic:1", physicalgraph.device.Protocol.LAN))
+}
+
+def configured() {
+	
+}
+
+def buttonConfigured(idx) {
+	return settings["lights_$idx"]
+}
+
+def isConfigured(){
+   if(getChildDevices().size() > 0) return true else return false
+}
+
+def isVirtualConfigured(did){ 
+    def foundDevice = false
+    getChildDevices().each {
+       if(it.deviceNetworkId != null){
+       if(it.deviceNetworkId.startsWith("${did}/")) foundDevice = true
+       }
+    }
+    return foundDevice
+}
+
+private virtualCreated(number) {
+    if (getChildDevice(getDeviceID(number))) {
+        return true
+    } else {
+        return false
+    }
+}
+
+private getDeviceID(number) {
+    return "${state.currentDeviceId}/${app.id}/${number}"
+}
+
+def installed() {
+	initialize()
+}
+
+def updated() {
+	unsubscribe()
+    unschedule()
+	initialize()
+}
+
+def initialize() {
+    ssdpSubscribe()
+    runEvery5Minutes("ssdpDiscover")
+}
+
+void ssdpSubscribe() {
+    subscribe(location, "ssdpTerm.urn:schemas-upnp-org:device:Basic:1", ssdpHandler)
+}
+
+void ssdpDiscover() {
+    sendHubCommand(new physicalgraph.device.HubAction("lan discovery urn:schemas-upnp-org:device:Basic:1", physicalgraph.device.Protocol.LAN))
+}
+
+def ssdpHandler(evt) {
+    def description = evt.description
+    def hub = evt?.hubId
+    def parsedEvent = parseLanMessage(description)
+    parsedEvent << ["hub":hub]
+
+    def devices = getDevices()
+    
+    String ssdpUSN = parsedEvent.ssdpUSN.toString()
+    
+    if (devices."${ssdpUSN}") {
+        def d = devices."${ssdpUSN}"
+        def child = getChildDevice(parsedEvent.mac)
+        def childIP
+        def childPort
+        if (child) {
+            childIP = child.getDeviceDataByName("ip")
+            childPort = child.getDeviceDataByName("port").toString()
+            log.debug "Device data: ($childIP:$childPort) - reporting data: (${convertHexToIP(parsedEvent.networkAddress)}:${convertHexToInt(parsedEvent.deviceAddress)})."
+            if(childIP != convertHexToIP(parsedEvent.networkAddress) || childPort != convertHexToInt(parsedEvent.deviceAddress).toString()){
+               log.debug "Device data (${child.getDeviceDataByName("ip")}) does not match what it is reporting(${convertHexToIP(parsedEvent.networkAddress)}). Attempting to update."
+               child.sync(convertHexToIP(parsedEvent.networkAddress), convertHexToInt(parsedEvent.deviceAddress).toString())
+            }
+        }
+
+        if (d.networkAddress != parsedEvent.networkAddress || d.deviceAddress != parsedEvent.deviceAddress) {
+            d.networkAddress = parsedEvent.networkAddress
+            d.deviceAddress = parsedEvent.deviceAddress
+        }
+    } else {
+        devices << ["${ssdpUSN}": parsedEvent]
+    }
+}
+
+void verifyDevices() {
+    def devices = getDevices().findAll { it?.value?.verified != true }
+    devices.each {
+        def ip = convertHexToIP(it.value.networkAddress)
+        def port = convertHexToInt(it.value.deviceAddress)
+        String host = "${ip}:${port}"
+        sendHubCommand(new physicalgraph.device.HubAction("""GET ${it.value.ssdpPath} HTTP/1.1\r\nHOST: $host\r\n\r\n""", physicalgraph.device.Protocol.LAN, host, [callback: deviceDescriptionHandler]))
+    }
+}
+
+def getDevices() {
+    state.devices = state.devices ?: [:]
+}
+
+void deviceDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
+	log.trace "description.xml response (application/xml)"
+	def body = hubResponse.xml
+	if (body?.device?.modelName?.text().startsWith("Sonoff Wifi Switch")) {
+		def devices = getDevices()
+		def device = devices.find {it?.key?.contains(body?.device?.UDN?.text())}
+		if (device) {
+			device.value << [name:body?.device?.friendlyName?.text() + " (" + convertHexToIP(hubResponse.ip) + ")", serialNumber:body?.device?.serialNumber?.text(), verified: true]
+		} else {
+			log.error "/description.xml returned a device that didn't exist"
+		}
+	}
+}
+
+def addDevices() {
+    def devices = getDevices()
+    def sectionText = ""
+
+    selectedDevices.each { dni ->bridgeLinking
+        def selectedDevice = devices.find { it.value.mac == dni }
+        def d
+        if (selectedDevice) {
+            d = getChildDevices()?.find {
+                it.deviceNetworkId == selectedDevice.value.mac
+            }
+        }
+
+        if (!d) {
+            log.debug "Creating Sonoff Switch with dni: ${selectedDevice.value.mac}"
+            log.debug Integer.parseInt(selectedDevice.value.deviceAddress,16)
+            addChildDevice("erocm123", "Sonoff Wifi Switch", selectedDevice.value.mac, selectedDevice?.value.hub, [
+                "label": selectedDevice?.value?.name ?: "Sonoff Wifi Switch",
+                "data": [
+                    "mac": selectedDevice.value.mac,
+                    "ip": convertHexToIP(selectedDevice.value.networkAddress),
+                    "port": "" + Integer.parseInt(selectedDevice.value.deviceAddress,16)
+                ]
+            ])
+            sectionText = sectionText + "Succesfully added Sonoff Wifi Switch with ip address ${convertHexToIP(selectedDevice.value.networkAddress)} \r\n"
+        }
+        
+	} 
+    log.debug sectionText
+        return dynamicPage(name:"addDevices", title:"Devices Added", nextPage:"mainPage",  uninstall: true) {
+        if(sectionText != ""){
+		section("Add Sonoff Results:") {
+			paragraph sectionText
+		}
+        }else{
+        section("No devices added") {
+			paragraph "All selected devices have previously been added"
+		}
+        }
+}
+    }
+
+def uninstalled() {
+    unsubscribe()
+    getChildDevices().each {
+        deleteChildDevice(it.deviceNetworkId)
+    }
+}
+
+
+
+private String convertHexToIP(hex) {
+	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+def log(message){
+    
+}

smartapps/gideon-api/gideon.src/gideon.groovy

@@ -1,253 +0,0 @@
-/**
- *  Gideon
- *
- *  Copyright 2016 Nicola Russo
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Gideon",
-    namespace: "gideon.api",
-    author: "Braindrain Solutions",
-    description: "Gideon AI Smart app allows you to connect and control all of your SmartThings devices through the Gideon AI app, making your SmartThings devices even smarter.",
-    category: "Family",
-    iconUrl: "http://s33.postimg.org/t77u7y7v3/logo.png",
-    iconX2Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
-    iconX3Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
-    oauth: [displayName: "Gideon AI API", displayLink: "gideon.ai"])
-
-
-preferences {
-	section("Control these switches...") {
-        input "switches", "capability.switch", multiple:true
-    }
-    section("Control these motion sensors...") {
-        input "motions", "capability.motionSensor", multiple:true
-    }
-    section("Control these presence sensors...") {
-    	input "presence_sensors", "capability.presenceSensor", multiple:true
-    }
-    section("Control these outlets...") {
-    	input "outlets", "capability.switch", multiple:true
-    }
-    section("Control these locks...") {
-    	input "locks", "capability.lock", multiple:true
-    }
-    section("Control these locks...") {
-	    input "temperature_sensors", "capability.temperatureMeasurement"
-    }
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-	// TODO: subscribe to attributes, devices, locations, etc.
-    subscribe(outlet, "energy", outletHandler)
-  	subscribe(outlet, "switch", outletHandler)
-}
-
-// TODO: implement event handlers
-def outletHandler(evt) {
-	log.debug "$outlet.currentEnergy"
-	//TODO call G API  
-}
-
-
-private device(it, type) {
-	it ? [id: it.id, label: it.label, type: type] : null
-}
-
-//API Mapping
-mappings {
-	path("/getalldevices") {
-    action: [
-      			GET: "getAllDevices"
-    		]
-  	}
-	path("/doorlocks/:id/:command") {
-    action: [
-      GET: "updateDoorLock"
-    ]
-  }
-  	path("/doorlocks/:id") {
-    action: [
-      			GET: "getDoorLockStatus"
-    		]
-  	}
-  	path("/tempsensors/:id") {
-    action: [
-      GET: "getTempSensorsStatus"
-    ]
-  }
-  	path("/presences/:id") {
-    action: [
-      GET: "getPresenceStatus"
-    ]
-  }
-  	path("/motions/:id") {
-    action: [
-      GET: "getMotionStatus"
-    ]
-  }
-  	path("/outlets/:id") {
-    action: [
-      GET: "getOutletStatus"
-    ]
-  }
-  	path("/outlets/:id/:command") {
-    action: [
-      GET: "updateOutlet"
-    ]
-  }
-  	path("/switches/:command") {
-    action: [
-      PUT: "updateSwitch"
-    ]
-  }
-}
-
-//API Methods
-def getAllDevices() {
-	def locks_list = locks.collect{device(it,"Lock")}
-    def presences_list = presence_sensors.collect{device(it,"Presence")}
-    def motions_list = motions.collect{device(it,"Motion")}
-    def outlets_list = outlets.collect{device(it,"Outlet")}
-    def switches_list = switches.collect{device(it,"Switch")}
-    def temp_list = temperature_sensors.collect{device(it,"Temperature")}
-    return [Locks: locks_list, Presences: presences_list, Motions: motions_list, Outlets: outlets_list, Switches: switches_list, Temperatures: temp_list]
-}
-
-//LOCKS
-def getDoorLockStatus() {
-	def device = locks.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentValue('lock')]
-        }
-}
-
-def updateDoorLock() {
-	def command = params.command
-    def device = locks.find { it.id == params.id }
-    if (command){
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            if(command == "toggle")
-            {
-                if(device.currentValue('lock') == "locked")
-                  device.unlock();
-                else
-                  device.lock();
-                  
-                return [Device_id: params.id, result_action: "200"]
-            }
-        }
-    }
-}
-
-//PRESENCE
-def getPresenceStatus() {
-
-	def device = presence_sensors.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentValue('presence')]
-   }
-}
-
-//MOTION
-def getMotionStatus() {
-
-	def device = motions.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentValue('motion')]
-   }
-}
-
-//OUTLET
-def getOutletStatus() {
-	
-    def device = outlets.find { it.id == params.id }
-   	if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentSwitch, Current_watt: device.currentValue("energy")]
-  }
-}
-
-def updateOutlet() {
-	
-    def command = params.command
-    def device = outlets.find { it.id == params.id }
-    if (command){
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            if(command == "toggle")
-            {
-                if(device.currentSwitch == "on")
-                  device.off();
-                else
-                  device.on();
-                  
-                return [Device_id: params.id, result_action: "200"]
-            }
-        }
-    }
-}                
-
-//SWITCH
-def updateSwitch() {
-    def command = params.command
-    def device = switches.find { it.id == params.id }
-    if (command){
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            if(command == "toggle")
-            {
-                if(device.currentSwitch == "on")
-                  device.off();
-                else
-                  device.on();
-                  
-                return [Device_id: params.id, result_action: "200"]
-            }
-        }
-    }
-}
-
-//TEMPERATURE
-def getTempSensorsStatus() {
-	
-    def device = temperature_sensors.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentValue('temperature')]
-   }
-}

smartapps/imbrianj/ready-for-rain.src/ready-for-rain.groovy

@@ -18,13 +18,8 @@ definition(
 )
 
 preferences {
-
-  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
-		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
-	}
-
-  if (location.channelName != 'samsungtv') {
-		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
+  section("Zip code?") {
+    input "zipcode", "text", title: "Zipcode?"
   }
 
   section("Things to check?") {
@@ -65,11 +60,7 @@ def scheduleCheck(evt) {
   // Only need to poll if we haven't checked in a while - and if something is left open.
   if((now() - (30 * 60 * 1000) > state.lastCheck["time"]) && open) {
     log.info("Something's open - let's check the weather.")
-    def response
-    if (location.channelName != 'samsungtv')
-      response = getWeatherFeature("forecast", zipCode)
-    else
-      response = getWeatherFeature("forecast")
+    def response = getWeatherFeature("forecast", zipcode)
     def weather  = isStormy(response)
 
     if(weather) {

smartapps/juano2310/jawbone-up-connect.src/jawbone-up-connect.groovy

@@ -4,9 +4,6 @@
  *  Author: Juan Risso
  *  Date: 2013-12-19
  */
-
-include 'asynchttp_v1'
-
 definition(
 	name: "Jawbone UP (Connect)",
 	namespace: "juano2310",
@@ -306,8 +303,7 @@ def setup() {
 			  	def childDevice = addChildDevice('juano2310', "Jawbone User", "${app.id}.${member.xid}",null,[name:"Jawbone UP - " + member.first, completedSetup: true])
 			    if (childDevice) {
 			       	log.debug "Child Device Successfully Created"
-			        childDevice?.generateSleepingEvent(false)
-                    pollChild(childDevice)
+			        generateInitialEvent (member, childDevice)
 			    }
 			}
 		}
@@ -353,67 +349,67 @@ def uninstalled() {
 }
 
 def pollChild(childDevice) {
-		def childMap = [ value: "$childDevice.device.deviceNetworkId}"]
-
-		def params = [
-				uri: 'https://jawbone.com',
-				path: '/nudge/api/users/@me/goals',
-				headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],
-				contentType: 'application/json'
-		]
-
-		asynchttp_v1.get('responseGoals', params, childMap)
-
-		def params2 = [
-				uri: 'https://jawbone.com',
-				path: '/nudge/api/users/@me/moves',
-				headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],
-				contentType: 'application/json'
-		]
-
-		asynchttp_v1.get('responseMoves', params2, childMap)
+    def member = state.member
+    generatePollingEvents (member, childDevice)
 }
 
-def responseGoals(response, dni) {
-	if (response.hasError()) {
-			log.error "response has error: $response.errorMessage"
-	} else {
-			def goals
-			try {
-					// json response already parsed into JSONElement object
-					goals = response.json.data
-			} catch (e) {
-					log.error "error parsing json from response: $e"
-			}
-			if (goals) {
-				def childDevice = getChildDevice(dni.value)
-				log.debug "Goal = ${goals.move_steps} Steps"
-				childDevice?.sendEvent(name:"goal", value: goals.move_steps)
-			} else {
-					log.debug "did not get json results from response body: $response.data"
-			}
-	}
+def generatePollingEvents (member, childDevice) {
+    // lets figure out if the member is currently "home" (At the place)
+    def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals"
+    def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"
+    def urlsleeps = "https://jawbone.com/nudge/api/users/@me/sleeps"
+    def goals = null
+    def moves = null
+ 	def sleeps = null
+    httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
+        goals = response.data.data
+    }
+    httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
+        moves = response.data.data.items[0]
+    }
+
+    try { // we are going to just ignore any errors
+        log.debug "Member = ${member.first}"
+        log.debug "Moves Goal = ${goals.move_steps} Steps"
+        log.debug "Moves = ${moves.details.steps} Steps"
+
+        childDevice?.sendEvent(name:"steps", value: moves.details.steps)
+        childDevice?.sendEvent(name:"goal", value: goals.move_steps)
+    	//setColor(moves.details.steps,goals.move_steps,childDevice)
+    }
+    catch (e) {
+            // eat it
+    }
 }
 
-def responseMoves(response, dni) {
-	if (response.hasError()) {
-			log.error "response has error: $response.errorMessage"
-	} else {
-			def moves
-			try {
-					// json response already parsed into JSONElement object
-					moves = response.json.data.items[0]
-			} catch (e) {
-					log.error "error parsing json from response: $e"
-			}
-			if (moves) {
-				def childDevice = getChildDevice(dni.value)
-				log.debug "Moves = ${moves.details.steps} Steps"
-				childDevice?.sendEvent(name:"steps", value: moves.details.steps)
-			} else {
-					log.debug "did not get json results from response body: $response.data"
-			}
-	}
+def generateInitialEvent (member, childDevice) {
+    // lets figure out if the member is currently "home" (At the place)
+    def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals"
+    def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"
+    def urlsleeps = "https://jawbone.com/nudge/api/users/@me/sleeps"
+    def goals = null
+    def moves = null
+ 	def sleeps = null
+    httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
+        goals = response.data.data
+    }
+    httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
+        moves = response.data.data.items[0]
+    }
+
+    try { // we are going to just ignore any errors
+        log.debug "Member = ${member.first}"
+        log.debug "Moves Goal = ${goals.move_steps} Steps"
+        log.debug "Moves = ${moves.details.steps} Steps"
+        log.debug "Sleeping state = false"
+        childDevice?.generateSleepingEvent(false)
+        childDevice?.sendEvent(name:"steps", value: moves.details.steps)
+        childDevice?.sendEvent(name:"goal", value: goals.move_steps)
+    	//setColor(moves.details.steps,goals.move_steps,childDevice)
+    }
+    catch (e) {
+            // eat it
+    }
 }
 
 def setColor (steps,goal,childDevice) {
@@ -437,7 +433,7 @@ def hookEventHandler() {
     // get some stuff we need
     def userId = json.events.user_xid[0]
     def	json_type = json.events.type[0]
-	  def json_action = json.events.action[0]
+	def json_action = json.events.action[0]
 
     //log.debug json
     log.debug "Userid = ${userId}"

smartapps/michaelstruck/color-coordinator.src/color-coordinator.groovy

@@ -1,10 +1,9 @@
 /**
  * 	Color Coordinator 
- *  Version 1.1.0 - 11/9/16
+ *  Version 1.0.0 - 7/4/15
  *  By Michael Struck
  *
  *  1.0.0 - Initial release
- *  1.1.0 - Fixed issue where master can be part of slaves. This causes a loop that impacts SmartThings. 
  *
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
@@ -32,35 +31,27 @@ preferences {
 }
 
 def mainPage() {
-	dynamicPage(name: "mainPage", title: "", install: true, uninstall: false) {
-		def masterInList = slaves.id.find{it==master.id}
-        if (masterInList) {
-        	section ("**WARNING**"){
-            	paragraph "You have included the Master Light in the Slave Group. This will cause a loop in execution. Please remove this device from the Slave Group.", image: "https://raw.githubusercontent.com/MichaelStruck/SmartThingsPublic/master/img/caution.png"
-            }
-        }
-        section("Master Light") {
+	dynamicPage(name: "mainPage", title: "", install: true, uninstall: true) {
+		section("Master Light") {
 			input "master", "capability.colorControl", title: "Colored Light"
 		}
 		section("Lights that follow the master settings") {
-			input "slaves", "capability.colorControl", title: "Colored Lights",  multiple: true, required: false, submitOnChange: true
+			input "slaves", "capability.colorControl", title: "Colored Lights",  multiple: true, required: false
 		}
     	section([mobileOnly:true], "Options") {
-			input "randomYes", "bool",title: "When Master Turned On, Randomize Color", defaultValue: false
+			label(title: "Assign a name", required: false)
 			href "pageAbout", title: "About ${textAppName()}", description: "Tap to get application version, license and instructions"
         }
 	}
 }
 
-page(name: "pageAbout", title: "About ${textAppName()}", uninstall: true) {
+page(name: "pageAbout", title: "About ${textAppName()}") {
 	section {
     	paragraph "${textVersion()}\n${textCopyright()}\n\n${textLicense()}\n"
 	}
 	section("Instructions") {
 		paragraph textHelp()
 	}
-    section("Tap button below to remove application"){
-    }
 }
 
 def installed() {   
@@ -81,55 +72,27 @@ def init() {
 }
 //-----------------------------------
 def onOffHandler(evt){
-	if (!slaves.id.find{it==master.id}){
-        if (master.currentValue("switch") == "on"){
-            if (randomYes) getRandomColorMaster()
-			else slaves?.on()
-        }
-        else {
-            slaves?.off()  
-        }
-	}
+	if (master.currentValue("switch") == "on"){
+    	slaves?.on()
+    }
+    else {
+		slaves?.off()  
+    }
 }
 
 def colorHandler(evt) {
-   	if (!slaves.id.find{it==master.id} && master.currentValue("switch") == "on"){
-		log.debug "Changing Slave units H,S,L"
-    	def dimLevel = master.currentValue("level")
-    	def hueLevel = master.currentValue("hue")
-    	def saturationLevel = master.currentValue("saturation")
-		def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
-    	slaves?.setColor(newValue)
-    	try {
-    		log.debug "Changing Slave color temp"
-        	def tempLevel = master.currentValue("colorTemperature")
-    		slaves?.setColorTemperature(tempLevel)
-    	}
-   		catch (e){
-    		log.debug "Color temp for master --"
-    	}
-	}
-}
-
-def getRandomColorMaster(){
-    def hueLevel = Math.floor(Math.random() *1000)
-    def saturationLevel = Math.floor(Math.random() * 100)
-    def dimLevel = master.currentValue("level")
+   	def dimLevel = master.currentValue("level")
+    def hueLevel = master.currentValue("hue")
+    def saturationLevel = master.currentValue("saturation")
 	def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
-    log.debug hueLevel
-    log.debug saturationLevel
-    master.setColor(newValue)
-    slaves?.setColor(newValue)   
+    slaves?.setColor(newValue)
 }
 
 def tempHandler(evt){
-    if (!slaves.id.find{it==master.id} && master.currentValue("switch") == "on"){
-        if (evt.value != "--") {
-            log.debug "Changing Slave color temp based on Master change"
-            def tempLevel = master.currentValue("colorTemperature")
-            slaves?.setColorTemperature(tempLevel)
-        }
-	}
+    if (evt.value != "--") {
+    	def tempLevel = master.currentValue("colorTemperature")
+    	slaves?.setColorTemperature(tempLevel)
+    }
 }
 
 //Version/Copyright/Information/Help
@@ -139,11 +102,11 @@ private def textAppName() {
 }	
 
 private def textVersion() {
-    def text = "Version 1.1.0 (11/09/2016)"
+    def text = "Version 1.0.0 (07/04/2015)"
 }
 
 private def textCopyright() {
-    def text = "Copyright © 2016 Michael Struck"
+    def text = "Copyright © 2015 Michael Struck"
 }
 
 private def textLicense() {
@@ -165,5 +128,5 @@ private def textHelp() {
 	def text =
     	"This application will allow you to control the settings of multiple colored lights with one control. " +
         "Simply choose a master control light, and then choose the lights that will follow the settings of the master, "+
-        "including on/off conditions, hue, saturation, level and color temperature. Also includes a random color feature."
+        "including on/off conditions, hue, saturation, level and color temperature."
 }

smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy

@@ -19,9 +19,9 @@
     author: "SmartThings",
     description: "Control your Bose SoundTouch speakers",
     category: "SmartThings Labs",
-    iconUrl: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon.png",
-    iconX2Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x.png",
-    iconX3Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x-1.png",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
     singleInstance: true
 )
 
@@ -104,7 +104,7 @@ def deviceDiscovery()
 
         return dynamicPage(name:"deviceDiscovery", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
             section("Please wait while we discover your ${getDeviceName()}. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices, submitOnChange: true
+                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices
             }
         }
     }
@@ -196,8 +196,6 @@ def addDevice(){
             d = addChildDevice(getNameSpace(), getDeviceName(), dni, newDevice?.value.hub, [label:"${deviceName}"])
             d.boseSetDeviceID(newDevice.value.deviceID)
             log.trace "Created ${d.displayName} with id $dni"
-            // sync DTH with device, done here as it currently don't work from the DTH's installed() method
-            d.refresh()
         } else {
             log.trace "${d.displayName} with id $dni already exists"
         }

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -842,7 +842,6 @@ private void storeThermostatData(thermostats) {
             minCoolingSetpoint: (stat.settings.coolRangeLow / 10),
             maxCoolingSetpoint: (stat.settings.coolRangeHigh / 10),
             autoMode: stat.settings.autoHeatCoolFeatureEnabled,
-            deviceAlive: stat.runtime.connected == true ? "true" : "false",
             auxHeatMode: (stat.settings.hasHeatPump) && (stat.settings.hasForcedAir || stat.settings.hasElectric || stat.settings.hasBoiler),
             temperature: (stat.runtime.actualTemperature / 10),
             heatingSetpoint: stat.runtime.desiredHeat / 10,

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -454,23 +454,17 @@ def sendStopEvent(source) {
 		eventData.value += "cancelled"
 	}
 
-	// send 100% completion event
-	sendTimeRemainingEvent(100)
-
-	// send a non-displayed 0% completion to reset tiles
-	sendTimeRemainingEvent(0, false)
-
-	// send sessionStatus event last so the event feed is ordered properly
 	sendControllerEvent(eventData)
+	sendTimeRemainingEvent(0)
 }
 
-def sendTimeRemainingEvent(percentComplete, displayed = true) {
+def sendTimeRemainingEvent(percentComplete) {
 	log.trace "sendTimeRemainingEvent(${percentComplete})"
 
 	def percentCompleteEventData = [
 			name: "percentComplete",
 			value: percentComplete as int,
-			displayed: displayed,
+			displayed: true,
 			isStateChange: true
 	]
 	sendControllerEvent(percentCompleteEventData)
@@ -480,7 +474,7 @@ def sendTimeRemainingEvent(percentComplete, displayed = true) {
 	def timeRemainingEventData = [
 			name: "timeRemaining",
 			value: displayableTime(timeRemaining),
-			displayed: displayed,
+			displayed: true,
 			isStateChange: true
 	]
 	sendControllerEvent(timeRemainingEventData)
@@ -614,6 +608,8 @@ private completion() {
 	handleCompletionMessaging()
 
 	handleCompletionModesAndPhrases()
+
+	sendTimeRemainingEvent(100)
 }
 
 private handleCompletionSwitches() {

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -242,6 +242,8 @@ def installed() {
 	} else {
 		initialize()
 	}
+	// Check for new devices and remove old ones every 3 hours
+	runEvery3Hours('updateDevices')
 }
 
 // called after settings are changed
@@ -269,19 +271,9 @@ private removeChildDevices(devices) {
 def initialize() {
 	log.debug "initialize"
 	updateDevices()
-	// Check for new devices and remove old ones every 3 hours
-	runEvery5Minutes('updateDevices')
-	setupDeviceWatch()
 }
 
 // Misc
-private setupDeviceWatch() {
-	def hub = location.hubs[0]
-	// Make sure that all child devices are enrolled in device watch
-	getChildDevices().each {
-		it.sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${hub?.hub?.hardwareID}\"}")
-	}
-}
 
 Map apiRequestHeaders() {
 	return ["Authorization": "Bearer ${state.lifxAccessToken}",
@@ -381,46 +373,32 @@ def updateDevices() {
 		selectors.add("${device.id}")
 		if (!childDevice) {
 			// log.info("Adding device ${device.id}: ${device.product}")
+			def data = [
+					label: device.label,
+					level: Math.round((device.brightness ?: 1) * 100),
+					switch: device.connected ? device.power : "unreachable",
+					colorTemperature: device.color.kelvin
+			]
 			if (device.product.capabilities.has_color) {
-				childDevice = addChildDevice(app.namespace, "LIFX Color Bulb", device.id, null, ["label": device.label, "completedSetup": true])
+				data["color"] = colorUtil.hslToHex((device.color.hue / 3.6) as int, (device.color.saturation * 100) as int)
+				data["hue"] = device.color.hue / 3.6
+				data["saturation"] = device.color.saturation * 100
+				childDevice = addChildDevice(app.namespace, "LIFX Color Bulb", device.id, null, data)
 			} else {
-				childDevice = addChildDevice(app.namespace, "LIFX White Bulb", device.id, null, ["label": device.label, "completedSetup": true])
+				childDevice = addChildDevice(app.namespace, "LIFX White Bulb", device.id, null, data)
 			}
 		}
-
-		if (device.product.capabilities.has_color) {
-			childDevice.sendEvent(name: "color", value: colorUtil.hslToHex((device.color.hue / 3.6) as int, (device.color.saturation * 100) as int))
-			childDevice.sendEvent(name: "hue", value: device.color.hue / 3.6)
-			childDevice.sendEvent(name: "saturation", value: device.color.saturation * 100)
-		}
-		childDevice.sendEvent(name: "label", value: device.label)
-		childDevice.sendEvent(name: "level", value: Math.round((device.brightness ?: 1) * 100))
-		childDevice.sendEvent(name: "switch.setLevel", value: Math.round((device.brightness ?: 1) * 100))
-		childDevice.sendEvent(name: "switch", value: device.power)
-		childDevice.sendEvent(name: "colorTemperature", value: device.color.kelvin)
-		childDevice.sendEvent(name: "model", value: device.product.name)
-
-		if (state.devices[device.id] == null) {
-			// State missing, add it and set it to opposite status as current status to provoke event below
-			state.devices[device.id] = [online: !device.connected]
-		}
-
-		if (!state.devices[device.id]?.online && device.connected) {
-			// Device came online after being offline
-			childDevice?.sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false)
-			log.debug "$device is back Online"
-		} else if (state.devices[device.id]?.online && !device.connected) {
-			// Device went offline after being online
-			childDevice?.sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false)
-			log.debug "$device went Offline"
-		}
-		state.devices[device.id] = [online: device.connected]
 	}
 	getChildDevices().findAll { !selectors.contains("${it.deviceNetworkId}") }.each {
 		log.info("Deleting ${it.deviceNetworkId}")
-		state.devices[it.deviceNetworkId] = null
 		deleteChildDevice(it.deviceNetworkId)
 	}
+	runIn(1, 'refreshDevices') // Asynchronously refresh devices so we don't block
 }
 
-
+def refreshDevices() {
+	log.info("Refreshing all devices...")
+	getChildDevices().each { device ->
+		device.refresh()
+	}
+}

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -24,12 +24,6 @@
  *  switches             | switch            | on, off                     | on, off
  *  motionSensors        | motion            |                             | active, inactive
  *  contactSensors       | contact           |                             | open, closed
- *  thermostat           | thermostat        | setHeatingSetpoint,         | temperature, heatingSetpoint
- *                       |                   | setCoolingSetpoint(number)  | coolingSetpoint, thermostatSetpoint
- *                       |                   | off, heat, emergencyHeat    | thermostatMode — ["emergency heat", "auto", "cool", "off", "heat"]
- *                       |                   | cool, setThermostatMode     | thermostatFanMode — ["auto", "on", "circulate"]
- *                       |                   | fanOn, fanAuto, fanCirculate| thermostatOperatingState — ["cooling", "heating", "pending heat",
- *                       |                   | setThermostatFanMode, auto  | "fan only", "vent economizer", "pending cool", "idle"]
  *  presenceSensors      | presence          |                             | present, 'not present'
  *  temperatureSensors   | temperature       |                             | <numeric, F or C according to unit>
  *  accelerationSensors  | acceleration      |                             | active, inactive
@@ -40,7 +34,6 @@
  *  locks                | lock              | lock, unlock                | locked, unlocked
  *  ---------------------+-------------------+-----------------------------+------------------------------------
  */
-include 'asynchttp_v1'
 
 definition(
     name: "Logitech Harmony (Connect)",
@@ -64,7 +57,6 @@ preferences(oauthPage: "deviceAuthorization") {
 			input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
 			input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false
 			input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors?", multiple: true, required: false
-      input "thermostats", "capability.thermostat", title: "Which Thermostats?", multiple: true, required: false
 			input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors?", multiple: true, required: false
 			input "temperatureSensors", "capability.temperatureMeasurement", title: "Which Temperature Sensors?", multiple: true, required: false
 			input "accelerationSensors", "capability.accelerationSensor", title: "Which Vibration Sensors?", multiple: true, required: false
@@ -104,7 +96,7 @@ def authPage() {
     def description = null
     if (!state.HarmonyAccessToken) {
 		if (!state.accessToken) {
-			log.debug "Harmony - About to create access token"
+			log.debug "About to create access token"
 			createAccessToken()
 		}
         description = "Click to enter Harmony Credentials"
@@ -117,28 +109,26 @@ def authPage() {
 		//device discovery request every 5 //25 seconds
 		int deviceRefreshCount = !state.deviceRefreshCount ? 0 : state.deviceRefreshCount as int
 		state.deviceRefreshCount = deviceRefreshCount + 1
-		def refreshInterval = 5
+		def refreshInterval = 3
 
 		def huboptions = state.HarmonyHubs ?: []
 		def actoptions = state.HarmonyActivities ?: []
 
 		def numFoundHub = huboptions.size() ?: 0
-    def numFoundAct = actoptions.size() ?: 0
-
+        def numFoundAct = actoptions.size() ?: 0
 		if((deviceRefreshCount % 5) == 0) {
 			discoverDevices()
 		}
-
 		return dynamicPage(name:"Credentials", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 			section("Please wait while we discover your Harmony Hubs and Activities. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-				input "selectedhubs", "enum", required:false, title:"Select Harmony Hubs (${numFoundHub} found)", multiple:true, submitOnChange: true, options:huboptions
+				input "selectedhubs", "enum", required:false, title:"Select Harmony Hubs (${numFoundHub} found)", multiple:true, options:huboptions
 			}
-      // Virtual activity flag
-      if (numFoundHub > 0 && numFoundAct > 0 && true)
+            // Virtual activity flag
+            if (numFoundHub > 0 && numFoundAct > 0 && true)
 			section("You can also add activities as virtual switches for other convenient integrations") {
-				input "selectedactivities", "enum", required:false, title:"Select Harmony Activities (${numFoundAct} found)", multiple:true, submitOnChange: true, options:actoptions
+				input "selectedactivities", "enum", required:false, title:"Select Harmony Activities (${numFoundAct} found)", multiple:true, options:actoptions
 			}
-    if (state.resethub)
+            if (state.resethub)
 			section("Connection to the hub timed out. Please restart the hub and try again.") {}
 		}
     }
@@ -148,13 +138,13 @@ def callback() {
 	def redirectUrl = null
 	if (params.authQueryString) {
 		redirectUrl = URLDecoder.decode(params.authQueryString.replaceAll(".+&redirect_url=", ""))
-		log.debug "Harmony - redirectUrl: ${redirectUrl}"
+		log.debug "redirectUrl: ${redirectUrl}"
 	} else {
-		log.warn "Harmony - No authQueryString"
+		log.warn "No authQueryString"
 	}
 
 	if (state.HarmonyAccessToken) {
-		log.debug "Harmony - Access token already exists"
+		log.debug "Access token already exists"
 		discovery()
 		success()
 	} else {
@@ -162,27 +152,27 @@ def callback() {
 		if (code) {
 			if (code.size() > 6) {
 				// Harmony code
-				log.debug "Harmony - Exchanging code for access token"
+				log.debug "Exchanging code for access token"
 				receiveToken(redirectUrl)
 			} else {
 				// Initiate the Harmony OAuth flow.
 				init()
 			}
 		} else {
-			log.debug "Harmony - This code should be unreachable"
+			log.debug "This code should be unreachable"
 			success()
 		}
 	}
 }
 
 def init() {
-	log.debug "Harmony - Requesting Code"
+	log.debug "Requesting Code"
 	def oauthParams = [client_id: "${appSettings.clientId}", scope: "remote", response_type: "code", redirect_uri: "${servercallbackUrl}" ]
 	redirect(location: "https://home.myharmony.com/oauth2/authorize?${toQueryString(oauthParams)}")
 }
 
 def receiveToken(redirectUrl = null) {
-	log.debug "Harmony - receiveToken"
+	log.debug "receiveToken"
     def oauthParams = [ client_id: "${appSettings.clientId}", client_secret: "${appSettings.clientSecret}", grant_type: "authorization_code", code: params.code ]
     def params = [
       uri: "https://home.myharmony.com/oauth2/token?${toQueryString(oauthParams)}",
@@ -193,7 +183,7 @@ def receiveToken(redirectUrl = null) {
         }
 	} catch (java.util.concurrent.TimeoutException e) {
     	fail(e)
-		log.warn "Harmony - Connection timed out, please try again later."
+		log.warn "Connection timed out, please try again later."
 	}
     discovery()
 	if (state.HarmonyAccessToken) {
@@ -317,7 +307,7 @@ def buildRedirectUrl(page) {
 
 def installed() {
 	if (!state.accessToken) {
-		log.debug "Harmony - About to create access token"
+		log.debug "About to create access token"
 		createAccessToken()
 	} else {
 		initialize()
@@ -326,7 +316,7 @@ def installed() {
 
 def updated() {
 	if (!state.accessToken) {
-		log.debug "Harmony - About to create access token"
+		log.debug "About to create access token"
 		createAccessToken()
 	} else {
 		initialize()
@@ -337,9 +327,9 @@ def uninstalled() {
 	if (state.HarmonyAccessToken) {
 		try {
         	state.HarmonyAccessToken = ""
-        	log.debug "Harmony - Success disconnecting Harmony from SmartThings"
+        	log.debug "Success disconnecting Harmony from SmartThings"
 		} catch (groovyx.net.http.HttpResponseException e) {
-			log.error "Harmony - Error disconnecting Harmony from SmartThings: ${e.statusCode}"
+			log.error "Error disconnecting Harmony from SmartThings: ${e.statusCode}"
 		}
 	}
 }
@@ -348,8 +338,7 @@ def initialize() {
 	state.aux = 0
 	if (selectedhubs || selectedactivities) {
 		addDevice()
-    runEvery5Minutes("poll")
-    getActivityList()
+        runEvery5Minutes("poll")
 	}
 }
 
@@ -358,7 +347,7 @@ def getHarmonydevices() {
 }
 
 Map discoverDevices() {
-    log.trace "Harmony - Discovering devices..."
+    log.trace "Discovering devices..."
     discovery()
     if (getHarmonydevices() != []) {
         def devices = state.Harmonydevices.hubs
@@ -370,7 +359,7 @@ Map discoverDevices() {
             def hubname = getHubName(it.key)
             def hubvalue = "${hubname}"
             hubs["harmony-${hubkey}"] = hubvalue
-        	  it.value.response.data.activities.each {
+        	it.value.response.data.activities.each {
                 def value = "${it.value.name}"
                 def key = "harmony-${hubkey}-${it.key}"
                 activities["${key}"] = value
@@ -388,177 +377,164 @@ def discovery() {
 	try {
 		httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
 	    	if (response.status == 200) {
-            	log.debug "Harmony - valid Token"
+            	log.debug "valid Token"
                 state.Harmonydevices = response.data
                 state.resethub = false
+                getActivityList()
+                poll()
 	        } else {
-            	log.debug "Harmony - Error: $response.status"
+            	log.debug "Error: $response.status"
             }
 	    }
 	} catch (groovyx.net.http.HttpResponseException e) {
         if (e.statusCode == 401) { // token is expired
             state.remove("HarmonyAccessToken")
-            log.warn "Harmony - Harmony Access token has expired"
+            log.warn "Harmony Access token has expired"
         }
 	} catch (java.net.SocketTimeoutException e) {
-		log.warn "Harmony - Connection to the hub timed out. Please restart the hub and try again."
+		log.warn "Connection to the hub timed out. Please restart the hub and try again."
     state.resethub = true
  	} catch (e) {
-    log.info "Harmony - Error: $e"
+    log.info "Logitech Harmony - Error: $e"
 	}
     return null
 }
 
 def addDevice() {
-    log.trace "Harmony - Adding Hubs"
+    log.trace "Adding Hubs"
     selectedhubs.each { dni ->
         def d = getChildDevice(dni)
         if(!d) {
             def newAction = state.HarmonyHubs.find { it.key == dni }
             d = addChildDevice("smartthings", "Logitech Harmony Hub C2C", dni, null, [label:"${newAction.value}"])
-            log.trace "Harmony - Created ${d.displayName} with id $dni"
+            log.trace "created ${d.displayName} with id $dni"
             poll()
         } else {
-            log.trace "Harmony - Found ${d.displayName} with id $dni already exists"
+            log.trace "found ${d.displayName} with id $dni already exists"
         }
     }
-    log.trace "Harmony - Adding Activities"
+    log.trace "Adding Activities"
     selectedactivities.each { dni ->
         def d = getChildDevice(dni)
         if(!d) {
             def newAction = state.HarmonyActivities.find { it.key == dni }
             if (newAction) {
 	            d = addChildDevice("smartthings", "Harmony Activity", dni, null, [label:"${newAction.value} [Harmony Activity]"])
-	            log.trace "Harmony - Created ${d.displayName} with id $dni"
+	            log.trace "created ${d.displayName} with id $dni"
 	            poll()
             }
         } else {
-            log.trace "Harmony - Found ${d.displayName} with id $dni already exists"
+            log.trace "found ${d.displayName} with id $dni already exists"
         }
     }
 }
 
 def activity(dni,mode) {
-    def tokenParam = [auth: state.HarmonyAccessToken]
-    def url
+    def Params = [auth: state.HarmonyAccessToken]
+    def msg = "Command failed"
+    def url = ''
     if (dni == "all") {
-        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(tokenParam)}"
+        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(Params)}"
     } else {
         def aux = dni.split('-')
         def hubId = aux[1]
         if (mode == "hub" || (aux.size() <= 2) || (aux[2] == "off")){
-        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(tokenParam)}"
+        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(Params)}"
         } else {
-          def activityId = aux[2]
-        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/${activityId}/${mode}?${toQueryString(tokenParam)}"
+            def activityId = aux[2]
+        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/${activityId}/${mode}?${toQueryString(Params)}"
         }
 	}
-  def params = [
-      uri: url,
-      contentType: 'application/json'
-  ]
-  asynchttp_v1.post('activityResponse', params)
-  return "Command Sent"
-}
-
-def activityResponse(response, data) {
-  if (response.hasError()) {
-    log.error "Harmony - response has error: $response.errorMessage"
-    if (response.status == 401) { // token is expired
-      state.remove("HarmonyAccessToken")
-      log.warn "Harmony - Access token has expired"
+	try {
+    	httpPostJson(uri: url) { response ->
+        	if (response.data.code == 200 || dni == "all") {
+            	msg = "Command sent succesfully"
+            	state.aux = 0
+            } else {
+            	msg = "Command failed. Error: $response.data.code"
+            }
+		}
+    } catch (groovyx.net.http.HttpResponseException ex) {
+        log.error ex
+        if (state.aux == 0) {
+        	state.aux = 1
+        	activity(dni,mode)
+        } else {
+        	msg = ex
+            state.aux = 0
+        }
+    } catch(Exception ex) {
+    	msg = ex
     }
-  } else {
-    if (response.status == 200) {
-      log.trace "Harmony - Command sent succesfully"
-      poll()
-    } else {
-      log.trace "Harmony - Command failed. Error: $response.status"
-    }
-  }
+    runIn(10, "poll", [overwrite: true])
+    return msg
 }
 
 def poll() {
 	// GET THE LIST OF ACTIVITIES
     if (state.HarmonyAccessToken) {
-        def tokenParam = [auth: state.HarmonyAccessToken]
-        def params = [
-            uri: "https://home.myharmony.com/cloudapi/state?${toQueryString(tokenParam)}",
-            headers: ["Accept": "application/json"],
-            contentType: 'application/json'
-        ]
-        asynchttp_v1.get('pollResponse', params)
-      } else {
-        log.warn "Harmony - Access token has expired"
-      }
-}
-
-def pollResponse(response, data) {
-	if (response.hasError()) {
-    log.error "Harmony - response has error: $response.errorMessage"
-    if (response.status == 401) { // token is expired
-      state.remove("HarmonyAccessToken")
-      log.warn "Harmony - Access token has expired"
-    }
-	} else {
-			def ResponseValues
-			try {
-					// json response already parsed into JSONElement object
-					ResponseValues = response.json
-			} catch (e) {
-					log.error "Harmony - error parsing json from response: $e"
-			}
-			if (ResponseValues) {
-        def map = [:]
-        ResponseValues.hubs.each {
-        if (it.value.message == "OK") {
-              map["${it.key}"] = "${it.value.response.data.currentAvActivity},${it.value.response.data.activityStatus}"
-              def hub = getChildDevice("harmony-${it.key}")
-              if (hub) {
-                  if (it.value.response.data.currentAvActivity == "-1") {
-                      hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", displayed: false)
-                  } else {
-                      def currentActivity
-                      def activityDTH = getChildDevice("harmony-${it.key}-${it.value.response.data.currentAvActivity}")
-                      if (activityDTH)
-                        currentActivity = activityDTH.device.displayName
-                      else
-                        currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
-                      hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", displayed: false)
-                  }
-              }
-          } else {
-            log.trace "Harmony - error response: $it.value.message"
-          }
-        }
-        def activities = getChildDevices()
-        def activitynotrunning = true
-        activities.each { activity ->
-            def act = activity.deviceNetworkId.split('-')
-            if (act.size() > 2) {
-                def aux = map.find { it.key == act[1] }
-                if (aux) {
-                    def aux2 = aux.value.split(',')
-                    def childDevice = getChildDevice(activity.deviceNetworkId)
-                    if ((act[2] == aux2[0]) && (aux2[1] == "1" || aux2[1] == "2")) {
-                        childDevice?.sendEvent(name: "switch", value: "on")
-                        if (aux2[1] == "1")
-                            runIn(5, "poll", [overwrite: true])
-                    } else {
-                        childDevice?.sendEvent(name: "switch", value: "off")
-                        if (aux2[1] == "3")
-                            runIn(5, "poll", [overwrite: true])
+    	  getActivityList()
+        def Params = [auth: state.HarmonyAccessToken]
+        def url = "https://home.myharmony.com/cloudapi/state?${toQueryString(Params)}"
+        try {
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
+                def map = [:]
+                response.data.hubs.each {
+		            if (it.value.message == "OK") {
+	                    map["${it.key}"] = "${it.value.response.data.currentAvActivity},${it.value.response.data.activityStatus}"
+	                    def hub = getChildDevice("harmony-${it.key}")
+	                    if (hub) {
+	                        if (it.value.response.data.currentAvActivity == "-1") {
+	                            hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
+	                        } else {
+	                            def currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
+	                            hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
+	                        }
+	                    }
+	                } else {
+		                log.trace it.value.message
+	                }
+                }
+                def activities = getChildDevices()
+                def activitynotrunning = true
+                activities.each { activity ->
+                    def act = activity.deviceNetworkId.split('-')
+                    if (act.size() > 2) {
+                        def aux = map.find { it.key == act[1] }
+                        if (aux) {
+                            def aux2 = aux.value.split(',')
+                            def childDevice = getChildDevice(activity.deviceNetworkId)
+                            if ((act[2] == aux2[0]) && (aux2[1] == "1" || aux2[1] == "2")) {
+                                childDevice?.sendEvent(name: "switch", value: "on")
+                                if (aux2[1] == "1")
+                                    runIn(5, "poll", [overwrite: true])
+                            } else {
+                                childDevice?.sendEvent(name: "switch", value: "off")
+                                if (aux2[1] == "3")
+                                    runIn(5, "poll", [overwrite: true])
+                            }
+                        }
                     }
                 }
+                return "Poll completed $map - $state.hubs"
             }
+        } catch (groovyx.net.http.HttpResponseException e) {
+              if (e.statusCode == 401) { // token is expired
+                  state.remove("HarmonyAccessToken")
+                  log.warn "Harmony Access token has expired"
+              }
+        } catch (java.net.SocketTimeoutException e) {
+        	log.warn "Connection to the hub timed out. Please restart the hub and try again."
+              state.resethub = true
+        } catch (e) {
+        	log.info "Logitech Harmony - Error: $e"
         }
-			} else {
-					log.debug "Harmony - did not get json results from response body: $response.data"
-			}
-	}
+    }
 }
 
+
 def getActivityList() {
+	// GET ACTIVITY'S NAME
     if (state.HarmonyAccessToken) {
         def Params = [auth: state.HarmonyAccessToken]
         def url = "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(Params)}"
@@ -575,19 +551,21 @@ def getActivityList() {
                                 [id: it.key, name: it.value['name'], type: it.value['type']]
                             }
                             activities += [id: "off", name: "Activity OFF", type: "0"]
+                            log.trace activities
                         }
-                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", displayed: false)
-					          }
+                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
+					}
                 }
             }
         } catch (groovyx.net.http.HttpResponseException e) {
         	log.trace e
         } catch (java.net.SocketTimeoutException e) {
         	log.trace e
-		    } catch(Exception e) {
+		} catch(Exception e) {
         	log.trace e
-		    }
+		}
     }
+	return activity
 }
 
 def getActivityName(activity,hubId) {
@@ -650,7 +628,7 @@ def sendNotification(msg) {
 
 def hookEventHandler() {
     // log.debug "In hookEventHandler method."
-    log.debug "Harmony - request = ${request}"
+    log.debug "request = ${request}"
 
     def json = request.JSON
 
@@ -659,14 +637,14 @@ def hookEventHandler() {
 }
 
 def listDevices() {
-	log.debug "Harmony - getDevices(), params: ${params}"
+	log.debug "getDevices, params: ${params}"
 	allDevices.collect {
 		deviceItem(it)
 	}
 }
 
 def getDevice() {
-	log.debug "Harmony - getDevice(), params: ${params}"
+	log.debug "getDevice, params: ${params}"
 	def device = allDevices.find { it.id == params.id }
 	if (!device) {
 		render status: 404, data: '{"msg": "Device not found"}'
@@ -679,7 +657,7 @@ def updateDevice() {
 	def data = request.JSON
 	def command = data.command
 	def arguments = data.arguments
-	log.debug "Harmony - updateDevice(), params: ${params}, request: ${data}"
+	log.debug "updateDevice, params: ${params}, request: ${data}"
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
@@ -747,7 +725,7 @@ def getDeviceCapabilityCommands(deviceCapabilities) {
 }
 
 def listSubscriptions() {
-	log.debug "Harmony - listSubscriptions()"
+	log.debug "listSubscriptions()"
 	app.subscriptions?.findAll { it.device?.device && it.device.id }?.collect {
 		def deviceInfo = state[it.device.id]
 		def response = [
@@ -768,17 +746,17 @@ def addSubscription() {
 	def attribute = data.attributeName
 	def callbackUrl = data.callbackUrl
 
-	log.debug "Harmony - addSubscription, params: ${params}, request: ${data}"
+	log.debug "addSubscription, params: ${params}, request: ${data}"
 	if (!attribute) {
 		render status: 400, data: '{"msg": "attributeName is required"}'
 	} else {
 		def device = allDevices.find { it.id == data.deviceId }
 		if (device) {
 			if (!state.harmonyHubs) {
-				log.debug "Harmony - Adding callbackUrl: $callbackUrl"
+				log.debug "Adding callbackUrl: $callbackUrl"
 				state[device.id] = [callbackUrl: callbackUrl]
 			}
-			log.debug "Harmony - Adding subscription"
+			log.debug "Adding subscription"
 			def subscription = subscribe(device, attribute, deviceHandler)
 			if (!subscription || !subscription.eventSubscription) {
 				subscription = app.subscriptions?.find { it.device?.device && it.device.id == data.deviceId && it.data == attribute && it.handler == 'deviceHandler' }
@@ -806,7 +784,7 @@ def removeSubscription() {
 
 	log.debug "removeSubscription, params: ${params}, subscription: ${subscription}, device: ${device}"
 	if (device) {
-		log.debug "Harmony - Removing subscription for device: ${device.id}"
+		log.debug "Removing subscription for device: ${device.id}"
 		state.remove(device.id)
 		unsubscribe(device)
 	}
@@ -830,17 +808,16 @@ def deviceHandler(evt) {
 	def deviceInfo = state[evt.deviceId]
 	if (state.harmonyHubs) {
 		state.harmonyHubs.each { harmonyHub ->
-      log.trace "Harmony - Sending data to $harmonyHub.name"
 			sendToHarmony(evt, harmonyHub.callbackUrl)
 		}
 	} else if (deviceInfo) {
 		if (deviceInfo.callbackUrl) {
 			sendToHarmony(evt, deviceInfo.callbackUrl)
 		} else {
-			log.warn "Harmony - No callbackUrl set for device: ${evt.deviceId}"
+			log.warn "No callbackUrl set for device: ${evt.deviceId}"
 		}
 	} else {
-		log.warn "Harmony - No subscribed device found for device: ${evt.deviceId}"
+		log.warn "No subscribed device found for device: ${evt.deviceId}"
 	}
 }
 
@@ -864,12 +841,12 @@ def sendToHarmony(evt, String callbackUrl) {
       body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
     ]
     try {
-        log.debug "Harmony - Sending data to Harmony Cloud: $params"
+        log.debug "Sending data to Harmony Cloud: $params"
         httpPostJson(params) { resp ->
-            log.debug "Harmony - Cloud Response: ${resp.status}"
+            log.debug "Harmony Cloud - Response: ${resp.status}"
         }
     } catch (e) {
-        log.error "Harmony - Cloud Something went wrong: $e"
+        log.error "Harmony Cloud - Something went wrong: $e"
     }
   }
 }
@@ -894,10 +871,10 @@ def activityCallback() {
 		if (data.errorCode == "200") {
 			device.setCurrentActivity(data.currentActivityId)
 		} else {
-			log.warn "Harmony - Activity callback error: ${data}"
+			log.warn "Activity callback error: ${data}"
 		}
 	} else {
-		log.warn "Harmony - Activity callback sent to non-existant dni: ${params.dni}"
+		log.warn "Activity callback sent to non-existant dni: ${params.dni}"
 	}
 	render status: 200, data: '{"msg": "Successfully received callbackUrl"}'
 }
@@ -931,19 +908,19 @@ def harmony() {
 }
 
 def deleteHarmony() {
-	log.debug "Harmony - Trying to delete Harmony hub with mac: ${params.mac}"
+	log.debug "Trying to delete Harmony hub with mac: ${params.mac}"
 	def harmonyHub = state.harmonyHubs?.find { it.mac == params.mac }
 	if (harmonyHub) {
-		log.debug "Harmony - Deleting Harmony hub with mac: ${params.mac}"
+		log.debug "Deleting Harmony hub with mac: ${params.mac}"
 		state.harmonyHubs.remove(harmonyHub)
 	} else {
-		log.debug "Harmony - Couldn't find Harmony hub with mac: ${params.mac}"
+		log.debug "Couldn't find Harmony hub with mac: ${params.mac}"
 	}
 	render status: 204, data: "{}"
 }
 
 private getAllDevices() {
-	([] + switches + motionSensors + contactSensors + thermostats + presenceSensors + temperatureSensors + accelerationSensors + waterSensors + lightSensors + humiditySensors + alarms + locks)?.findAll()?.unique { it.id }
+	([] + switches + motionSensors + contactSensors + presenceSensors + temperatureSensors + accelerationSensors + waterSensors + lightSensors + humiditySensors + alarms + locks)?.findAll()?.unique { it.id }
 }
 
 private deviceItem(device) {

smartapps/smartthings/severe-weather-alert.src/severe-weather-alert.groovy

@@ -26,22 +26,17 @@ definition(
 )
 
 preferences {
-
-  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
-		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
+	section ("In addition to push notifications, send text alerts to...") {
+        input("recipients", "contact", title: "Send notifications to") {
+            input "phone1", "phone", title: "Phone Number 1", required: false
+            input "phone2", "phone", title: "Phone Number 2", required: false
+            input "phone3", "phone", title: "Phone Number 3", required: false
+        }
 	}
 
-  if (location.channelName != 'samsungtv') {
-		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
-  }
-
-	section ("In addition to push notifications, send text alerts to...") {
-      input("recipients", "contact", title: "Send notifications to") {
-          input "phone1", "phone", title: "Phone Number 1", required: false
-          input "phone2", "phone", title: "Phone Number 2", required: false
-          input "phone3", "phone", title: "Phone Number 3", required: false
-      }
-	 }
+	section ("Zip code (optional, defaults to location coordinates)...") {
+		input "zipcode", "text", title: "Zip Code", required: false
+	}
 }
 
 def installed() {
@@ -66,7 +61,7 @@ def checkForSevereWeather() {
 	def alerts
 	if(locationIsDefined()) {
 		if(zipcodeIsValid()) {
-			alerts = getWeatherFeature("alerts", zipCode)?.alerts
+			alerts = getWeatherFeature("alerts", zipcode)?.alerts
 		} else {
 			log.warn "Severe Weather Alert: Invalid zipcode entered, defaulting to location's zipcode"
 			alerts = getWeatherFeature("alerts")?.alerts