MSA-1788: Iris Smart Plug

devicetypes/blebson/iris-smart-plug.src/iris-smart-plug.groovy

@@ -0,0 +1,241 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	SmartPower Outlet (CentraLite)
+ *
+ *	Author: SmartThings
+ *	Date: 2015-08-23
+ */
+metadata {
+	// Automatically generated. Make future change here.
+	definition (name: "Iris Smart Plug", namespace: "blebson", author: "SmartThings") {
+		capability "Actuator"
+		capability "Switch"
+		capability "Power Meter"
+		capability "Energy Meter"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Sensor"
+		
+		// indicates that device keeps track of heartbeat (in state.heartbeat)
+		attribute "heartbeat", "string"     
+		attribute "timerStart", "number"
+		
+		attribute "energyDisplay", "string"
+		attribute "elapsedTimeDisplay", "string"
+	
+		command "resetEnergyUsage"
+			
+		fingerprint profileId: "0104", inClusters: "0000 0003 0004 0005 0006 0B04 0B05 FC03", outClusters: "0019", manufacturer: "CentraLite",  model: "3210-L", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "4257050-RZHAC", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	preferences {
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS1.jpg",
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS2.jpg"
+				])
+		}
+        
+        section("Reporting Intervals") {
+        	input "intervalMin", "number", title: "Minimum interval between reports [s]", defaultValue: 5, range: "1..600"
+        	input "intervalMax", "number", title: "Maximum interval between reports [s]", defaultValue: 600, range: "1..600"
+        }
+	}
+
+	// UI tile definitions
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+			}
+			tileAttribute ("power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'${currentValue} W'
+			}
+		}
+        
+		valueTile("energyDisplay", "device.energyDisplay", width: 5, height: 1, decoration: "flat") {
+			state "default", label:'Energy used: ${currentValue}', unit: "kWh"
+        	}
+        	
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+        
+		standardTile("resetUsage", "command.resetEnergyUsage", decoration: "flat", width: 1, height: 1){
+			state "default", action: "resetEnergyUsage", label:'Reset kWh', icon:"st.Health & Wellness.health7"
+		}        
+        
+		valueTile("elapsedTimeDisplay", "device.elapsedTimeDisplay", decoration: "flat", width: 5, height: 1){
+			state "default", label: 'Time: ${currentValue}', unit: "h"
+		}      
+
+		standardTile("configure", "device.switch", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+			state "default", label:"", action:"configure", icon:"st.secondary.configure"
+		}
+
+		main "switch"
+		details(["switch","energyDisplay","resetUsage","power","elapsedTimeDisplay","refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	log.debug "description is $description"
+
+	// save heartbeat (i.e. last time we got a message from device)
+	state.heartbeat = Calendar.getInstance().getTimeInMillis()
+	if (state.timerStart == null)
+	{
+		state.timerStart = Calendar.getInstance().getTimeInMillis()
+		state.energy = 0.0
+	}
+
+	def finalResult = zigbee.getKnownDescription(description)
+
+	//TODO: Remove this after getKnownDescription can parse it automatically
+	if (!finalResult && description!="updated")
+		finalResult = getPowerDescription(zigbee.parseDescriptionAsMap(description))
+
+	if (finalResult) {
+		log.info finalResult
+		if (finalResult.type == "update") {
+			log.info "$device updates: ${finalResult.value}"
+		}
+		else if (finalResult.type == "power") {
+			def powerValue = (finalResult.value as Integer)/10           
+			sendEvent(name: "power", value: powerValue, isStateChange: true, displayed: false) // note: stateChange = true added so the energy calculation can work properly
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/           
+			calculateAndShowEnergy()
+		}
+		else {
+			sendEvent(name: finalResult.type, value: finalResult.value)
+		}
+	}
+	else {
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug zigbee.parseDescriptionAsMap(description)
+	}
+}
+
+def calculateAndShowEnergy()
+{
+    def recentEvents = device.statesSince("power", new Date()-1, [max: 2]).collect {[value: it.value as float, date: it.date]}        	
+    def deltaT = (recentEvents[0].date.getTime() - recentEvents[1].date.getTime()) // time since last "power" event in milliseconds
+    deltaT = deltaT / 3600000 // convert to hours
+    
+    def energyValue = device.currentValue("energy") 
+    if(energyValue != null) {
+    	energyValue += (recentEvents[1].value * deltaT) / 1000 // energy used since last "power" event in kWh 
+    }
+    
+    sendEvent(name: "energy", value: energyValue, displayed: false)
+    sendEvent(name: "energyDisplay", value: String.format("%6.3f kWh",energyValue), displayed: false)
+
+    def currentTime = Calendar.getInstance().getTimeInMillis()   
+    def timeDifference = ((long)currentTime - state.timerStart)/1000; // in seconds
+    int h = (int) (timeDifference / (3600));
+    int m = (int) ((timeDifference - (h * 3600)) / 60);
+    int s = (int) (timeDifference - (h * 3600) - m * 60);
+    int d = (int) h >= 24 ? h / 24 : 0
+    h = d > 0 ? h % 24 : h
+
+    sendEvent(name: "elapsedTimeDisplay", value: String.format("%dd %02d:%02d:%02d", d, h, m, s), displayed: false)
+}
+
+def off() {
+	zigbee.off()
+}
+
+def on() {
+	zigbee.on()
+}
+
+def resetEnergyUsage() {
+	sendEvent(name: "energy", value: 0.0, displayed: false)
+	state.timerStart = Calendar.getInstance().getTimeInMillis()
+	sendEvent(name: "energyDisplay", value: String.format("%6.3f kWh",0.0), displayed: false)
+	sendEvent(name: "elapsedTimeDisplay", value: String.format("%dd %02d:%02d:%02d", 0, 0, 0, 0), displayed: false)
+}
+
+def refresh() {
+	sendEvent(name: "heartbeat", value: "alive", displayed:false)
+	return zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
+}
+
+def configure() {
+	log.debug "Configuring..."
+	return zigbee.onOffConfig() + powerConfig() + refresh()
+}
+
+def updated() {
+	response(configure())
+}
+
+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 01
+def powerConfig() {
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x0B04 0x050B 0x29 ${intervalMin ?: 5} ${intervalMax ?: 600} {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+//TODO: Remove this after getKnownDescription can parse it automatically
+def getPowerDescription(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0B04") {
+		if (descMap.attrId == "050b") {
+			if(descMap.value!="ffff")
+				powerValue = zigbee.convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0B04") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0B04) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return [:]
+	}
+}

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,7 +7,6 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
-		capability "Bridge"
 		capability "Health Check"
 
 		attribute "networkAddress", "string"

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -24,7 +24,6 @@ metadata {
 		capability "Refresh"
 		capability "Actuator"
 		capability "Sensor"
-		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-ZHAC"
 
@@ -80,8 +79,7 @@ def parse(String description) {
 		*/
 		event.value = event.value / 10
 	}
-
+	return event
-	return event ? createEvent(event) : event
 }
 
 def setLevel(value) {

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -4,7 +4,6 @@ metadata {
 		capability "Actuator"
 		capability "Switch"
 		capability "Sensor"
-		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0006, 0004, 0003, 0000, 0005", outClusters: "0019", manufacturer: "Compacta International, Ltd", model: "ZBMPlug15", deviceJoinName: "SmartPower Outlet V1"
 	}

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -83,8 +83,9 @@ def parse(String description) {
 
 	if (event) {
 		if (event.name == "power") {
-			def value = (event.value as Integer) / 10
+			event.value = event.value / 10
-			event = createEvent(name: event.name, value: value, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true)
+			event.descriptionText = '{{ device.displayName }} power is {{ value }} Watts'
+			event.translatable = true
 		} else if (event.name == "switch") {
 			def descriptionText = event.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
 			event = createEvent(name: event.name, value: event.value, descriptionText: descriptionText, translatable: true)
@@ -105,7 +106,7 @@ def parse(String description) {
 			log.debug "${cluster}"
 		}
 	}
-	return event ? createEvent(event) : event
+	return event
 }
 
 def off() {

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -85,8 +85,7 @@ def bridgeDiscovery(params=[:])
 	}
 
 	return dynamicPage(name:"bridgeDiscovery", title:"Discovery Started!", nextPage:"bridgeBtnPush", refreshInterval:refreshInterval, uninstall: true) {
-		section("Please wait while we discover your Hue Bridge. Kindly note that you must first configure your Hue Bridge and Lights using the Philips Hue application. " +
+		section("Please wait while we discover your Hue Bridge. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-				"Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedHue", "enum", required:false, title:"Select Hue Bridge (${numFound} found)", multiple:false, options:options, submitOnChange: true
 		}
 	}
@@ -179,7 +178,7 @@ def bulbDiscovery() {
 	}
 
 	if (bulbRefreshCount > 200 && numFound == 0) {
-		// Time out after 10 minutes
+		// Time out to avoid endless discovery
 		state.inBulbDiscovery = false
 		bulbRefreshCount = 0
 		return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Failed!", nextPage:"", refreshInterval:0, install:true, uninstall: true) {
@@ -1152,7 +1151,7 @@ def setColorTemperature(childDevice, huesettings) {
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000/huesettings)
 	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [ct: ct, on: true])
-	return "Setting color temperature to $ct"
+	return "Setting color temperature to $percent"
 }
 
 def setColor(childDevice, huesettings) {

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -346,7 +346,7 @@ def devicesList(selector = '') {
 		if (resp.status == 200) {
 			return resp.data
 		} else {
-			log.debug("No response from device list call. ${resp.status} ${resp.data}")
+			log.error("Non-200 from device list call. ${resp.status} ${resp.data}")
 			return []
 		}
 	}
@@ -418,15 +418,9 @@ def updateDevices() {
 	}
 	getChildDevices().findAll { !selectors.contains("${it.deviceNetworkId}") }.each {
 		log.info("Deleting ${it.deviceNetworkId}")
-		if (state.devices[it.deviceNetworkId])
 		state.devices[it.deviceNetworkId] = null
-		// The reason the implementation is trying to delete this bulb is because it is not longer connected to the LIFX location.
-		// Adding "try" will prevent this exception from happening.
-		// Ideally device health would show to the user that the device is not longer accessible so that the user can either force delete it or remove it from the SmartApp.
-		try {
 		deleteChildDevice(it.deviceNetworkId)
-		} catch (Exception e) {
-			log.debug("Can't remove this device because it's being used by an SmartApp")
-		}
 	}
 }
+
+