MSA-1788: Iris Smart Plug

devicetypes/blebson/iris-smart-plug.src/iris-smart-plug.groovy

@@ -0,0 +1,241 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	SmartPower Outlet (CentraLite)
+ *
+ *	Author: SmartThings
+ *	Date: 2015-08-23
+ */
+metadata {
+	// Automatically generated. Make future change here.
+	definition (name: "Iris Smart Plug", namespace: "blebson", author: "SmartThings") {
+		capability "Actuator"
+		capability "Switch"
+		capability "Power Meter"
+		capability "Energy Meter"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Sensor"
+		
+		// indicates that device keeps track of heartbeat (in state.heartbeat)
+		attribute "heartbeat", "string"     
+		attribute "timerStart", "number"
+		
+		attribute "energyDisplay", "string"
+		attribute "elapsedTimeDisplay", "string"
+	
+		command "resetEnergyUsage"
+			
+		fingerprint profileId: "0104", inClusters: "0000 0003 0004 0005 0006 0B04 0B05 FC03", outClusters: "0019", manufacturer: "CentraLite",  model: "3210-L", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "4257050-RZHAC", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	preferences {
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS1.jpg",
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS2.jpg"
+				])
+		}
+        
+        section("Reporting Intervals") {
+        	input "intervalMin", "number", title: "Minimum interval between reports [s]", defaultValue: 5, range: "1..600"
+        	input "intervalMax", "number", title: "Maximum interval between reports [s]", defaultValue: 600, range: "1..600"
+        }
+	}
+
+	// UI tile definitions
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+			}
+			tileAttribute ("power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'${currentValue} W'
+			}
+		}
+        
+		valueTile("energyDisplay", "device.energyDisplay", width: 5, height: 1, decoration: "flat") {
+			state "default", label:'Energy used: ${currentValue}', unit: "kWh"
+        	}
+        	
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+        
+		standardTile("resetUsage", "command.resetEnergyUsage", decoration: "flat", width: 1, height: 1){
+			state "default", action: "resetEnergyUsage", label:'Reset kWh', icon:"st.Health & Wellness.health7"
+		}        
+        
+		valueTile("elapsedTimeDisplay", "device.elapsedTimeDisplay", decoration: "flat", width: 5, height: 1){
+			state "default", label: 'Time: ${currentValue}', unit: "h"
+		}      
+
+		standardTile("configure", "device.switch", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+			state "default", label:"", action:"configure", icon:"st.secondary.configure"
+		}
+
+		main "switch"
+		details(["switch","energyDisplay","resetUsage","power","elapsedTimeDisplay","refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	log.debug "description is $description"
+
+	// save heartbeat (i.e. last time we got a message from device)
+	state.heartbeat = Calendar.getInstance().getTimeInMillis()
+	if (state.timerStart == null)
+	{
+		state.timerStart = Calendar.getInstance().getTimeInMillis()
+		state.energy = 0.0
+	}
+
+	def finalResult = zigbee.getKnownDescription(description)
+
+	//TODO: Remove this after getKnownDescription can parse it automatically
+	if (!finalResult && description!="updated")
+		finalResult = getPowerDescription(zigbee.parseDescriptionAsMap(description))
+
+	if (finalResult) {
+		log.info finalResult
+		if (finalResult.type == "update") {
+			log.info "$device updates: ${finalResult.value}"
+		}
+		else if (finalResult.type == "power") {
+			def powerValue = (finalResult.value as Integer)/10           
+			sendEvent(name: "power", value: powerValue, isStateChange: true, displayed: false) // note: stateChange = true added so the energy calculation can work properly
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/           
+			calculateAndShowEnergy()
+		}
+		else {
+			sendEvent(name: finalResult.type, value: finalResult.value)
+		}
+	}
+	else {
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug zigbee.parseDescriptionAsMap(description)
+	}
+}
+
+def calculateAndShowEnergy()
+{
+    def recentEvents = device.statesSince("power", new Date()-1, [max: 2]).collect {[value: it.value as float, date: it.date]}        	
+    def deltaT = (recentEvents[0].date.getTime() - recentEvents[1].date.getTime()) // time since last "power" event in milliseconds
+    deltaT = deltaT / 3600000 // convert to hours
+    
+    def energyValue = device.currentValue("energy") 
+    if(energyValue != null) {
+    	energyValue += (recentEvents[1].value * deltaT) / 1000 // energy used since last "power" event in kWh 
+    }
+    
+    sendEvent(name: "energy", value: energyValue, displayed: false)
+    sendEvent(name: "energyDisplay", value: String.format("%6.3f kWh",energyValue), displayed: false)
+
+    def currentTime = Calendar.getInstance().getTimeInMillis()   
+    def timeDifference = ((long)currentTime - state.timerStart)/1000; // in seconds
+    int h = (int) (timeDifference / (3600));
+    int m = (int) ((timeDifference - (h * 3600)) / 60);
+    int s = (int) (timeDifference - (h * 3600) - m * 60);
+    int d = (int) h >= 24 ? h / 24 : 0
+    h = d > 0 ? h % 24 : h
+
+    sendEvent(name: "elapsedTimeDisplay", value: String.format("%dd %02d:%02d:%02d", d, h, m, s), displayed: false)
+}
+
+def off() {
+	zigbee.off()
+}
+
+def on() {
+	zigbee.on()
+}
+
+def resetEnergyUsage() {
+	sendEvent(name: "energy", value: 0.0, displayed: false)
+	state.timerStart = Calendar.getInstance().getTimeInMillis()
+	sendEvent(name: "energyDisplay", value: String.format("%6.3f kWh",0.0), displayed: false)
+	sendEvent(name: "elapsedTimeDisplay", value: String.format("%dd %02d:%02d:%02d", 0, 0, 0, 0), displayed: false)
+}
+
+def refresh() {
+	sendEvent(name: "heartbeat", value: "alive", displayed:false)
+	return zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
+}
+
+def configure() {
+	log.debug "Configuring..."
+	return zigbee.onOffConfig() + powerConfig() + refresh()
+}
+
+def updated() {
+	response(configure())
+}
+
+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 01
+def powerConfig() {
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x0B04 0x050B 0x29 ${intervalMin ?: 5} ${intervalMax ?: 600} {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+//TODO: Remove this after getKnownDescription can parse it automatically
+def getPowerDescription(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0B04") {
+		if (descMap.attrId == "050b") {
+			if(descMap.value!="ffff")
+				powerValue = zigbee.convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0B04") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0B04) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return [:]
+	}
+}

smartapps/sheikhsphere/smart-dehumidifier.src/smart-dehumidifier.groovy

@@ -1,130 +0,0 @@
-/**
- *  Smart Humidifier
- *
- *  Copyright 2014 Sheikh Dawood
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Smart Dehumidifier",
-    namespace: "Sheikhsphere",
-    author: "Sheikh Dawood",
-    description: "Turn on/off dehumidifier based on relative humidity from a sensor.",
-    category: "Convenience",
-    iconUrl: "https://graph.api.smartthings.com/api/devices/icons/st.Weather.weather12-icn",
-    iconX2Url: "https://graph.api.smartthings.com/api/devices/icons/st.Weather.weather12-icn?displaySize=2x",
-    iconX3Url: "https://graph.api.smartthings.com/api/devices/icons/st.Weather.weather12-icn?displaySize=3x",
-    oauth: true)
-
-
-preferences {
-	section("Monitor the humidity of:") {
-		input "humiditySensor1", "capability.relativeHumidityMeasurement"
-	}
-	section("When the humidity rises above:") {
-		input "humidityHigh", "number", title: "Percentage ?"
-	}
-    section("When the humidity drops below:") {
-		input "humidityLow", "number", title: "Percentage ?"
-	}
-    section("Control Humidifier:") {
-		input "switch1", "capability.switch"
-	}
-    section( "Notifications" ) {
-        input "sendPushMessage", "enum", title: "Send a push notification?", metadata:[values:["Yes","No"]], required:false
-        input "phone1", "phone", title: "Send a Text Message?", required: false
-    }
-}
-
-def installed() {
-	subscribe(humiditySensor1, "humidity", humidityHandler)
-}
-
-def updated() {
-	unsubscribe()
-	subscribe(humiditySensor1, "humidity", humidityHandler)
-}
-
-def humidityHandler(evt) {
-	log.trace "humidity: $evt.value"
-    log.trace "set high point: $humidityHigh"
-    log.trace "set low point: $humidityLow"
-
-	def currentHumidity = Double.parseDouble(evt.value.replace("%", ""))
-	def humidityHigh1 = humidityHigh 
-    def humidityLow1 = humidityLow 
-	def mySwitch = settings.switch1
-
-	if (currentHumidity >= humidityHigh1) {
-		log.debug "Checking how long the humidity sensor has been reporting >= $humidityHigh1"
-
-		// Don't send a continuous stream of text messages
-		def deltaMinutes = 10 
-		def timeAgo = new Date(now() - (1000 * 60 * deltaMinutes).toLong())
-		def recentEvents = humiditySensor1.eventsSince(timeAgo)
-		log.trace "Found ${recentEvents?.size() ?: 0} events in the last $deltaMinutes minutes"
-		def alreadySentSms1 = recentEvents.count { Double.parseDouble(it.value.replace("%", "")) >= humidityHigh1 } > 1
-
-		if (alreadySentSms1) {
-			log.debug "Notification already sent within the last $deltaMinutes minutes"
-
-		} else {
-         	if (state.lastStatus != "on") {
-                log.debug "Humidity Rose Above $humidityHigh1:  sending SMS and deactivating $mySwitch"
-                send("${humiditySensor1.label} sensed high humidity level of ${evt.value}, turning on ${switch1.label}")
-                switch1?.on()
-                state.lastStatus = "on"
-            }
-		}
-	}
-    else if (currentHumidity <= humidityLow1) {
-		log.debug "Checking how long the humidity sensor has been reporting <= $humidityLow1"
-
-		// Don't send a continuous stream of text messages
-		def deltaMinutes = 10 
-		def timeAgo = new Date(now() - (1000 * 60 * deltaMinutes).toLong())
-		def recentEvents = humiditySensor1.eventsSince(timeAgo)
-		log.trace "Found ${recentEvents?.size() ?: 0} events in the last $deltaMinutes minutes"
-		def alreadySentSms2 = recentEvents.count { Double.parseDouble(it.value.replace("%", "")) <= humidityLow1 } > 1
-
-		if (alreadySentSms2) {
-			log.debug "Notification already sent within the last $deltaMinutes minutes"
-
-		} else {
-        	if (state.lastStatus != "off") {
-                log.debug "Humidity Dropped Below $humidityLow1:  sending SMS and activating $mySwitch"
-                send("${humiditySensor1.label} sensed low humidity level of ${evt.value}, turning off ${switch1.label}")
-                switch1?.off()
-                state.lastStatus = "off"
-            }
-		}
-	}
-    else {
-    	//log.debug "Humidity remained in threshold:  sending SMS to $phone1 and activating $mySwitch"
-		//send("${humiditySensor1.label} sensed humidity level of ${evt.value} is within threshold, keeping off ${switch1.label}")
-    	//switch1?.off()
-    }
-}
-
-private send(msg) {
-    if ( sendPushMessage != "No" ) {
-        log.debug( "sending push message" )
-        sendPush( msg )
-    }
-
-    if ( phone1 ) {
-        log.debug( "sending text message" )
-        sendSms( phone1, msg )
-    }
-
-    log.debug msg
-}
-