MSA-1782: This is a convenience application: We have a TV in our lab which is always on and causes a lot of distraction for people who are working there. The purpose of this application is manage the time that the screen is on as follows: The application turns on the outlet if the entrace door opens (multipurpose sensor) and there is motion in front of the motion sensor for a user defined amount of time (say 5 minutes). If there is no activity in front of the motion sensor for a user defined amount of time (say 10 minutes) the outlet is turned off.

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -14,7 +14,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 	}
 
 	simulator {

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -13,7 +13,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 	}
 
 	simulator {

devicetypes/smartthings/mimolite-garage-door-controller.src/mimolite-garage-door-controller.groovy

@@ -36,7 +36,6 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Contact Sensor"
-		capability "Light"
 
 		attribute "powered", "string"
 

devicetypes/smartthings/zigbee-dimmer-power.src/README.md

@@ -23,7 +23,6 @@ Works with:
 * **Switch** - can detect state (possible values: on/off)
 * **Switch Level** - represents current light level, usually 0-100 in percent
 * **Health Check** - indicates ability to get device health notifications
-* **Light** - indicates that the device belongs to Light category.
 
 ## Device Health
 

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -22,7 +22,6 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
-        capability "Light"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702"

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -21,7 +21,6 @@ metadata {
         capability "Sensor"
         capability "Switch"
         capability "Health Check"
-        capability "Light"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"

devicetypes/smartthings/zwave-dimmer-switch-generic.src/README.md

@@ -6,12 +6,6 @@ Works with:
 
 * [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-plug-in-lamp-dimmer-module)
 * [Leviton Universal Dimmer (DZMX1-LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-universal-dimmer)
-* [Leviton 1000W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-1000w-incandescent-dimmer)
-* [Leviton 600W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-600w-incandescent-dimmer)
-* [Enerwave In-Wall Dimmer](https://www.smartthings.com/works-with-smartthings/enerwave/enerwave-in-wall-dimmer-zw500d)
-* [Leviton 3-Speed Fan Controller](https://www.smartthings.com/works-with-smartthings/leviton/leviton-3-speed-fan-controller)
-* [Leviton Magnetic Low Voltage Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-magnetic-low-voltage-dimmer)
-* [Remotec Technology Plug-In Dimmer](https://www.smartthings.com/works-with-smartthings/remotec-technology/remotec-technology-plug-in-dimmer)
 
 ## Table of contents
 
@@ -46,9 +40,4 @@ If the device doesn't pair when trying from the SmartThings mobile app, it is po
 Pairing needs to be tried again by placing the device closer to the hub.
 Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
 * [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 1000W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 600W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 3-Speed Fan Controller Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Enerwave In-Wall Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204854176-How-to-connect-Enerwave-switches-and-dimmers)
-* [Remotec Technology Plug-In Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202295150-Remotec-Technology-Plug-In-Dimmer-ZDS-100-)
+* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Light"
 
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
@@ -29,8 +28,6 @@ metadata {
 		fingerprint mfr:"001D", prod:"1001", model:"0334", deviceJoinName: "Leviton 3-Speed Fan Controller"
 		fingerprint mfr:"001D", prod:"0602", model:"0334", deviceJoinName: "Leviton Magnetic Low Voltage Dimmer"
 		fingerprint mfr:"001D", prod:"0401", model:"0334", deviceJoinName: "Leviton 600W Incandescent Dimmer"
-		fingerprint mfr:"0111", prod:"8200", model:"0200", deviceJoinName: "Remotec Technology Plug-In Dimmer"
-		fingerprint mfr:"1104", prod:"001D", model:"0501", deviceJoinName: "Leviton 1000W Incandescant Dimmer"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -25,7 +25,6 @@ metadata {
 		capability "Switch Level"
 		capability "Sensor"
 		capability "Actuator"
-		capability "Light"
 
 		command "reset"
 

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -21,7 +21,6 @@ metadata {
 		capability "Refresh"
 		capability "Configuration"
 		capability "Sensor"
-		capability "Light"
 
 		command "reset"
 

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -19,7 +19,6 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Light"
 
 		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
 		fingerprint mfr:"001D", prod:"1A02", model:"0334", deviceJoinName: "Leviton Appliance Module"
@@ -27,8 +26,6 @@ metadata {
 		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
 		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
 		fingerprint mfr:"001D", prod:"0301", model:"0334", deviceJoinName: "Leviton 15A Switch"
-		fingerprint mfr:"001D", prod:"0F01", model:"0334", deviceJoinName: "Leviton 5A Incandescent Switch"
-		fingerprint mfr:"001D", prod:"1603", model:"0334", deviceJoinName: "Leviton 15A Split Duplex Receptacle"
 		fingerprint mfr:"011A", prod:"0101", model:"0102", deviceJoinName: "Enerwave On/Off Switch"
 		fingerprint mfr:"011A", prod:"0101", model:"0603", deviceJoinName: "Enerwave Duplex Receptacle"
 	}

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 
 		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
 		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"

smartapps/nnoori0527/switch-control-based-on-motion-door-sensors.src/switch-control-based-on-motion-door-sensors.groovy

@@ -0,0 +1,179 @@
+/**
+ *  Switch control based on motion/door sensors
+ *
+ *  Copyright 2017 narges noori
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Switch control based on motion/door sensors",
+    namespace: "nnoori0527",
+    author: "narges noori",
+    description: "This application turns on the outlet if the entrace door opens (multipurpose sensor) and there is motion in front of the motion sensor for a user defined amount of time (say 5 minutes). If there is no activity in front of the motion sensor for a user defined amount of time (say 10 minutes) the outlet is turned off.",
+    category: "Convenience",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    oauth: [displayName: "Switch/outlet control", displayLink: ""])
+
+
+
+
+preferences {
+
+	section ("Allow external service to control these things...") {
+    	input "switches", "capability.switch", multiple: true, required: true
+    }
+    
+    section("Turn on when motion detected after someone opens the door:") {
+        input "motionSensor", "capability.motionSensor", required: true, title: "Where?"
+    }
+    
+    section("Turn on when there's movement for:") {
+        input "minutes", "number", required: true, title: "Minutes to turn on TV?"
+    }
+    section("Turn on when there's movement for:") {
+        input "minutesInactive", "number", required: true, title: "Minutes to wait before turning off TV?"
+    }
+   
+    
+    section("Turn on when door open:") {
+        input "doorOpenCloseDetector", "capability.contactSensor", required: true, title: "Where?"
+    }
+
+    section("Turn on this outlet") {
+        input "tvOutlet", "capability.switch", required: true
+    }
+    
+}
+
+def installed() {
+    initialize()
+}
+
+def updated() {
+    unsubscribe()
+    initialize()
+}
+
+def initialize() {
+    subscribe(doorOpenCloseDetector, "contact.open", doorOpenedHandler)
+    subscribe(motionSensor, "motion.inactive", motionStoppedHandler)
+}
+
+def doorOpenedHandler(evt){
+	log.debug "doorOpenedHandler called: $evt"
+    runIn(60 * minutes, checkMotion)
+    //tvOutlet.on()
+}
+
+def checkMotion() {
+    log.debug "In checkMotion scheduled method"
+
+    def motionState = motionSensor.currentState("motion")
+
+    if (motionState.value == "active") {
+        // get the time elapsed between now and when the motion reported inactive
+        def elapsed = now() - motionState.date.time
+
+        // elapsed time is in milliseconds, so the threshold must be converted to milliseconds too
+        def threshold = 1000 * 60 * minutes
+
+        if (elapsed <= threshold) {
+            log.debug "Motion has stayed active long enough since last check ($elapsed ms):  turning outlet on"
+            //myswitch.on()
+            tvOutlet.on()
+        } else {
+            log.debug "Motion has not stayed active long enough since last check ($elapsed ms):  doing nothing"
+        }
+    } else {
+        // Motion active; just log it and do nothing
+        log.debug "Motion is inactive, do nothing and wait for active"
+    }
+}
+
+def motionStoppedHandler(evt) {
+    log.debug "motionStoppedHandler called: $evt"
+    runIn(60 * (minutesInactive+1), checkMotionTurnOff)
+}
+
+def checkMotionTurnOff() {
+    log.debug "In checkMotionTurnOff scheduled method"
+
+    def motionState = motionSensor.currentState("motion")
+
+    if (motionState.value == "inactive") {
+        // get the time elapsed between now and when the motion reported inactive
+        def elapsed = now() - motionState.date.time
+
+        // elapsed time is in milliseconds, so the threshold must be converted to milliseconds too
+        def threshold = 1000 * 60 * minutesInactive
+
+        if (elapsed >= threshold) {
+            log.debug "Motion has stayed inactive long enough since last check ($elapsed ms):  turning switch off"
+            tvOutlet.off()
+        } else {
+            log.debug "Motion has not stayed inactive long enough since last check ($elapsed ms):  doing nothing"
+        }
+    } else {
+        // Motion active; just log it and do nothing
+        log.debug "Motion is active, do nothing and wait for inactive"
+    }
+} 
+
+
+
+mappings {
+  path("/switches") {
+    action: [
+      GET: "listSwitches"
+    ]
+  }
+  path("/switches/:command") {
+    action: [
+      PUT: "updateSwitches"
+    ]
+  }
+}
+
+// returns a list like
+// [[name: "kitchen lamp", value: "off"], [name: "bathroom", value: "on"]]
+def listSwitches() {
+
+    def resp = []
+    switches.each {
+        resp << [name: it.displayName, value: it.currentValue("switch")]
+    }
+    return resp
+}
+
+void updateSwitches() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+
+    // all switches have the comand
+    // execute the command on all switches
+    // (note we can do this on the array - the command will be invoked on every element
+    switch(command) {
+        case "on":
+            switches.on()
+            break
+        case "off":
+            switches.off()
+            break
+        default:
+            httpError(400, "$command is not a valid command for all switches specified")
+    }
+
+}
+
+
+

smartapps/sheikhsphere/smart-dehumidifier.src/smart-dehumidifier.groovy

@@ -1,130 +0,0 @@
-/**
- *  Smart Humidifier
- *
- *  Copyright 2014 Sheikh Dawood
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Smart Dehumidifier",
-    namespace: "Sheikhsphere",
-    author: "Sheikh Dawood",
-    description: "Turn on/off dehumidifier based on relative humidity from a sensor.",
-    category: "Convenience",
-    iconUrl: "https://graph.api.smartthings.com/api/devices/icons/st.Weather.weather12-icn",
-    iconX2Url: "https://graph.api.smartthings.com/api/devices/icons/st.Weather.weather12-icn?displaySize=2x",
-    iconX3Url: "https://graph.api.smartthings.com/api/devices/icons/st.Weather.weather12-icn?displaySize=3x",
-    oauth: true)
-
-
-preferences {
-	section("Monitor the humidity of:") {
-		input "humiditySensor1", "capability.relativeHumidityMeasurement"
-	}
-	section("When the humidity rises above:") {
-		input "humidityHigh", "number", title: "Percentage ?"
-	}
-    section("When the humidity drops below:") {
-		input "humidityLow", "number", title: "Percentage ?"
-	}
-    section("Control Humidifier:") {
-		input "switch1", "capability.switch"
-	}
-    section( "Notifications" ) {
-        input "sendPushMessage", "enum", title: "Send a push notification?", metadata:[values:["Yes","No"]], required:false
-        input "phone1", "phone", title: "Send a Text Message?", required: false
-    }
-}
-
-def installed() {
-	subscribe(humiditySensor1, "humidity", humidityHandler)
-}
-
-def updated() {
-	unsubscribe()
-	subscribe(humiditySensor1, "humidity", humidityHandler)
-}
-
-def humidityHandler(evt) {
-	log.trace "humidity: $evt.value"
-    log.trace "set high point: $humidityHigh"
-    log.trace "set low point: $humidityLow"
-
-	def currentHumidity = Double.parseDouble(evt.value.replace("%", ""))
-	def humidityHigh1 = humidityHigh 
-    def humidityLow1 = humidityLow 
-	def mySwitch = settings.switch1
-
-	if (currentHumidity >= humidityHigh1) {
-		log.debug "Checking how long the humidity sensor has been reporting >= $humidityHigh1"
-
-		// Don't send a continuous stream of text messages
-		def deltaMinutes = 10 
-		def timeAgo = new Date(now() - (1000 * 60 * deltaMinutes).toLong())
-		def recentEvents = humiditySensor1.eventsSince(timeAgo)
-		log.trace "Found ${recentEvents?.size() ?: 0} events in the last $deltaMinutes minutes"
-		def alreadySentSms1 = recentEvents.count { Double.parseDouble(it.value.replace("%", "")) >= humidityHigh1 } > 1
-
-		if (alreadySentSms1) {
-			log.debug "Notification already sent within the last $deltaMinutes minutes"
-
-		} else {
-         	if (state.lastStatus != "on") {
-                log.debug "Humidity Rose Above $humidityHigh1:  sending SMS and deactivating $mySwitch"
-                send("${humiditySensor1.label} sensed high humidity level of ${evt.value}, turning on ${switch1.label}")
-                switch1?.on()
-                state.lastStatus = "on"
-            }
-		}
-	}
-    else if (currentHumidity <= humidityLow1) {
-		log.debug "Checking how long the humidity sensor has been reporting <= $humidityLow1"
-
-		// Don't send a continuous stream of text messages
-		def deltaMinutes = 10 
-		def timeAgo = new Date(now() - (1000 * 60 * deltaMinutes).toLong())
-		def recentEvents = humiditySensor1.eventsSince(timeAgo)
-		log.trace "Found ${recentEvents?.size() ?: 0} events in the last $deltaMinutes minutes"
-		def alreadySentSms2 = recentEvents.count { Double.parseDouble(it.value.replace("%", "")) <= humidityLow1 } > 1
-
-		if (alreadySentSms2) {
-			log.debug "Notification already sent within the last $deltaMinutes minutes"
-
-		} else {
-        	if (state.lastStatus != "off") {
-                log.debug "Humidity Dropped Below $humidityLow1:  sending SMS and activating $mySwitch"
-                send("${humiditySensor1.label} sensed low humidity level of ${evt.value}, turning off ${switch1.label}")
-                switch1?.off()
-                state.lastStatus = "off"
-            }
-		}
-	}
-    else {
-    	//log.debug "Humidity remained in threshold:  sending SMS to $phone1 and activating $mySwitch"
-		//send("${humiditySensor1.label} sensed humidity level of ${evt.value} is within threshold, keeping off ${switch1.label}")
-    	//switch1?.off()
-    }
-}
-
-private send(msg) {
-    if ( sendPushMessage != "No" ) {
-        log.debug( "sending push message" )
-        sendPush( msg )
-    }
-
-    if ( phone1 ) {
-        log.debug( "sending text message" )
-        sendSms( phone1, msg )
-    }
-
-    log.debug msg
-}
-