MSA-1782: This is a convenience application: We have a TV in our lab which is always on and causes a lot of distraction for people who are working there. The purpose of this application is manage the time that the screen is on as follows: The application turns on the outlet if the entrace door opens (multipurpose sensor) and there is motion in front of the motion sensor for a user defined amount of time (say 5 minutes). If there is no activity in front of the motion sensor for a user defined amount of time (say 10 minutes) the outlet is turned off.

devicetypes/besense/besense-door-window-sensor.src/besense-door-window-sensor.groovy

@@ -1,256 +0,0 @@
-/**
- *  Besense z-wave Door/window sensor
- */
-
-metadata {
-	definition (name: "BeSense Door/Window Sensor", namespace: "BeSense", author: "BeSense") {
-		capability "Contact Sensor"
-		capability "Sensor"
-		capability "Battery"
-		capability "Configuration"
-
-		fingerprint mfr: "0214", prod: "0002", model: "0001", deviceJoinName: "BeSense Door/window sensor" 
-	}
-
-	// simulator metadata
-	simulator {
-		// status messages
-		status "open":  "command: 2001, payload: FF"
-		status "closed": "command: 2001, payload: 00"
-		status "wake up": "command: 8407, payload: "
-	}
-
-	// UI tile definitions
-	tiles(scale: 1) {
-		standardTile("contact", "device.contact", width: 3, height: 3, canChangeIcon: true) {
-			state ("open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ea0f46")
-			state ("closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#27CC73")
-		}
-		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-
-		main "contact"
-		details(["contact", "battery"])
-	}
-}
-
-def parse(String description) {
-	def result = null
-	if (description.startsWith("Err 106")) {
-		if (state.sec) {
-			log.debug description
-		} else {
-			result = createEvent(
-				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.",
-				eventType: "ALERT",
-				name: "secureInclusion",
-				value: "failed",
-				isStateChange: true,
-			)
-		}
-	} else if (description != "updated") {
-		def cmd = zwave.parse(description, [0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
-		if (cmd) {
-			result = zwaveEvent(cmd)
-		}
-	}
-	log.debug "parsed '$description' to $result"
-	return result
-}
-
-def updated() {
-	def cmds = []
-	if (!state.MSR) {
-		cmds = [
-			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
-			"delay 1200",
-			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
-		]
-	} else if (!state.lastbat) {
-		cmds = []
-	} else {
-		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
-	}
-	response(cmds)
-}
-
-def configure() {
-	commands([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
-		zwave.batteryV1.batteryGet()
-	], 6000)
-}
-
-def sensorValueEvent(value) {
-	if (value) {
-		createEvent(name: "contact", value: "open", descriptionText: "$device.displayName is open")
-	} else {
-		createEvent(name: "contact", value: "closed", descriptionText: "$device.displayName is closed")
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd)
-{
-	sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd)
-{
-	sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd)
-{
-	sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cmd)
-{
-	sensorValueEvent(cmd.sensorValue)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
-{
-	sensorValueEvent(cmd.sensorState)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd)
-{
-	def result = []
-	if (cmd.notificationType == 0x06 && cmd.event == 0x16) {
-		result << sensorValueEvent(1)
-	} else if (cmd.notificationType == 0x06 && cmd.event == 0x17) {
-		result << sensorValueEvent(0)
-	} else if (cmd.notificationType == 0x07) {
-		if (cmd.v1AlarmType == 0x07) {  // special case for nonstandard messages from Monoprice door/window sensors
-			result << sensorValueEvent(cmd.v1AlarmLevel)
-		} else if (cmd.event == 0x01 || cmd.event == 0x02) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x03) {
-			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
-		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
-			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
-		} else if (cmd.event == 0x07) {
-			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
-			result << createEvent(name: "motion", value: "active", descriptionText:"$device.displayName detected motion")
-		}
-	} else if (cmd.notificationType) {
-		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
-		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
-	} else {
-		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
-		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
-	}
-	result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
-{
-	def event = createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
-	def cmds = []
-	if (!state.MSR) {
-		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-		cmds << "delay 1200"
-	}
-	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
-		cmds << command(zwave.batteryV1.batteryGet())
-	} else {
-		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
-	}
-	[event, response(cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-	state.lastbat = now()
-	[createEvent(map), response(zwave.wakeUpV1.wakeUpNoMoreInformation())]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	def result = []
-
-	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-	log.debug "msr: $msr"
-	updateDataValue("MSR", msr)
-
-	retypeBasedOnMSR()
-
-	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
-
-	if (msr == "011A-0601-0901") {  // Enerwave motion doesn't always get the associationSet that the hub sends on join
-		result << response(zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId))
-	} else if (!device.currentState("battery")) {
-		if (msr == "0086-0102-0059") {
-			result << response(zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format())
-		} else {
-			result << response(command(zwave.batteryV1.batteryGet()))
-		}
-	}
-
-	result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
-	// log.debug "encapsulated: $encapsulatedCommand"
-	if (encapsulatedCommand) {
-		state.sec = 1
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
-}
-
-private command(physicalgraph.zwave.Command cmd) {
-	if (state.sec == 1) {
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	} else {
-		cmd.format()
-	}
-}
-
-private commands(commands, delay=200) {
-	delayBetween(commands.collect{ command(it) }, delay)
-}
-
-def retypeBasedOnMSR() {
-	switch (state.MSR) {
-		case "0086-0002-002D":
-			log.debug "Changing device type to Z-Wave Water Sensor"
-			setDeviceType("Z-Wave Water Sensor")
-			break
-		case "011F-0001-0001":  // Schlage motion
-		case "014A-0001-0001":  // Ecolink motion
-		case "014A-0004-0001":  // Ecolink motion +
-		case "0060-0001-0002":  // Everspring SP814
-		case "0060-0001-0003":  // Everspring HSP02
-		case "011A-0601-0901":  // Enerwave ZWN-BPC
-        case "0214-0002-0002": // Besense pir or ceiling sensor
-			log.debug "Changing device type to Z-Wave Motion Sensor"
-			setDeviceType("Z-Wave Motion Sensor")
-			break
-		case "013C-0002-000D":  // Philio multi +
-			log.debug "Changing device type to 3-in-1 Multisensor Plus (SG)"
-			setDeviceType("3-in-1 Multisensor Plus (SG)")
-			break
-		case "0109-2001-0106":  // Vision door/window
-			log.debug "Changing device type to Z-Wave Plus Door/Window Sensor"
-			setDeviceType("Z-Wave Plus Door/Window Sensor")
-			break
-		case "0109-2002-0205": // Vision Motion
-			log.debug "Changing device type to Z-Wave Plus Motion/Temp Sensor"
-			setDeviceType("Z-Wave Plus Motion/Temp Sensor")
-			break
-	}
-}

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -14,7 +14,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 	}
 
 	simulator {

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -13,7 +13,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 	}
 
 	simulator {

devicetypes/smartthings/mimolite-garage-door-controller.src/mimolite-garage-door-controller.groovy

@@ -36,7 +36,6 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Contact Sensor"
-		capability "Light"
 
 		attribute "powered", "string"
 

devicetypes/smartthings/zigbee-dimmer-power.src/README.md

@@ -23,7 +23,6 @@ Works with:
 * **Switch** - can detect state (possible values: on/off)
 * **Switch Level** - represents current light level, usually 0-100 in percent
 * **Health Check** - indicates ability to get device health notifications
-* **Light** - indicates that the device belongs to Light category.
 
 ## Device Health
 

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -22,7 +22,6 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
-        capability "Light"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702"

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -21,7 +21,6 @@ metadata {
         capability "Sensor"
         capability "Switch"
         capability "Health Check"
-        capability "Light"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"

devicetypes/smartthings/zwave-dimmer-switch-generic.src/README.md

@@ -6,12 +6,6 @@ Works with:
 
 * [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-plug-in-lamp-dimmer-module)
 * [Leviton Universal Dimmer (DZMX1-LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-universal-dimmer)
-* [Leviton 1000W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-1000w-incandescent-dimmer)
-* [Leviton 600W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-600w-incandescent-dimmer)
-* [Enerwave In-Wall Dimmer](https://www.smartthings.com/works-with-smartthings/enerwave/enerwave-in-wall-dimmer-zw500d)
-* [Leviton 3-Speed Fan Controller](https://www.smartthings.com/works-with-smartthings/leviton/leviton-3-speed-fan-controller)
-* [Leviton Magnetic Low Voltage Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-magnetic-low-voltage-dimmer)
-* [Remotec Technology Plug-In Dimmer](https://www.smartthings.com/works-with-smartthings/remotec-technology/remotec-technology-plug-in-dimmer)
 
 ## Table of contents
 
@@ -46,9 +40,4 @@ If the device doesn't pair when trying from the SmartThings mobile app, it is po
 Pairing needs to be tried again by placing the device closer to the hub.
 Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
 * [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 1000W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 600W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 3-Speed Fan Controller Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Enerwave In-Wall Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204854176-How-to-connect-Enerwave-switches-and-dimmers)
-* [Remotec Technology Plug-In Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202295150-Remotec-Technology-Plug-In-Dimmer-ZDS-100-)
+* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Light"
 
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
@@ -29,8 +28,6 @@ metadata {
 		fingerprint mfr:"001D", prod:"1001", model:"0334", deviceJoinName: "Leviton 3-Speed Fan Controller"
 		fingerprint mfr:"001D", prod:"0602", model:"0334", deviceJoinName: "Leviton Magnetic Low Voltage Dimmer"
 		fingerprint mfr:"001D", prod:"0401", model:"0334", deviceJoinName: "Leviton 600W Incandescent Dimmer"
-		fingerprint mfr:"0111", prod:"8200", model:"0200", deviceJoinName: "Remotec Technology Plug-In Dimmer"
-		fingerprint mfr:"1104", prod:"001D", model:"0501", deviceJoinName: "Leviton 1000W Incandescant Dimmer"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -25,7 +25,6 @@ metadata {
 		capability "Switch Level"
 		capability "Sensor"
 		capability "Actuator"
-		capability "Light"
 
 		command "reset"
 

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -21,7 +21,6 @@ metadata {
 		capability "Refresh"
 		capability "Configuration"
 		capability "Sensor"
-		capability "Light"
 
 		command "reset"
 

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -19,7 +19,6 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Light"
 
 		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
 		fingerprint mfr:"001D", prod:"1A02", model:"0334", deviceJoinName: "Leviton Appliance Module"
@@ -27,8 +26,6 @@ metadata {
 		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
 		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
 		fingerprint mfr:"001D", prod:"0301", model:"0334", deviceJoinName: "Leviton 15A Switch"
-		fingerprint mfr:"001D", prod:"0F01", model:"0334", deviceJoinName: "Leviton 5A Incandescent Switch"
-		fingerprint mfr:"001D", prod:"1603", model:"0334", deviceJoinName: "Leviton 15A Split Duplex Receptacle"
 		fingerprint mfr:"011A", prod:"0101", model:"0102", deviceJoinName: "Enerwave On/Off Switch"
 		fingerprint mfr:"011A", prod:"0101", model:"0603", deviceJoinName: "Enerwave Duplex Receptacle"
 	}

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 
 		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
 		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"

smartapps/nnoori0527/switch-control-based-on-motion-door-sensors.src/switch-control-based-on-motion-door-sensors.groovy

@@ -0,0 +1,179 @@
+/**
+ *  Switch control based on motion/door sensors
+ *
+ *  Copyright 2017 narges noori
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Switch control based on motion/door sensors",
+    namespace: "nnoori0527",
+    author: "narges noori",
+    description: "This application turns on the outlet if the entrace door opens (multipurpose sensor) and there is motion in front of the motion sensor for a user defined amount of time (say 5 minutes). If there is no activity in front of the motion sensor for a user defined amount of time (say 10 minutes) the outlet is turned off.",
+    category: "Convenience",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    oauth: [displayName: "Switch/outlet control", displayLink: ""])
+
+
+
+
+preferences {
+
+	section ("Allow external service to control these things...") {
+    	input "switches", "capability.switch", multiple: true, required: true
+    }
+    
+    section("Turn on when motion detected after someone opens the door:") {
+        input "motionSensor", "capability.motionSensor", required: true, title: "Where?"
+    }
+    
+    section("Turn on when there's movement for:") {
+        input "minutes", "number", required: true, title: "Minutes to turn on TV?"
+    }
+    section("Turn on when there's movement for:") {
+        input "minutesInactive", "number", required: true, title: "Minutes to wait before turning off TV?"
+    }
+   
+    
+    section("Turn on when door open:") {
+        input "doorOpenCloseDetector", "capability.contactSensor", required: true, title: "Where?"
+    }
+
+    section("Turn on this outlet") {
+        input "tvOutlet", "capability.switch", required: true
+    }
+    
+}
+
+def installed() {
+    initialize()
+}
+
+def updated() {
+    unsubscribe()
+    initialize()
+}
+
+def initialize() {
+    subscribe(doorOpenCloseDetector, "contact.open", doorOpenedHandler)
+    subscribe(motionSensor, "motion.inactive", motionStoppedHandler)
+}
+
+def doorOpenedHandler(evt){
+	log.debug "doorOpenedHandler called: $evt"
+    runIn(60 * minutes, checkMotion)
+    //tvOutlet.on()
+}
+
+def checkMotion() {
+    log.debug "In checkMotion scheduled method"
+
+    def motionState = motionSensor.currentState("motion")
+
+    if (motionState.value == "active") {
+        // get the time elapsed between now and when the motion reported inactive
+        def elapsed = now() - motionState.date.time
+
+        // elapsed time is in milliseconds, so the threshold must be converted to milliseconds too
+        def threshold = 1000 * 60 * minutes
+
+        if (elapsed <= threshold) {
+            log.debug "Motion has stayed active long enough since last check ($elapsed ms):  turning outlet on"
+            //myswitch.on()
+            tvOutlet.on()
+        } else {
+            log.debug "Motion has not stayed active long enough since last check ($elapsed ms):  doing nothing"
+        }
+    } else {
+        // Motion active; just log it and do nothing
+        log.debug "Motion is inactive, do nothing and wait for active"
+    }
+}
+
+def motionStoppedHandler(evt) {
+    log.debug "motionStoppedHandler called: $evt"
+    runIn(60 * (minutesInactive+1), checkMotionTurnOff)
+}
+
+def checkMotionTurnOff() {
+    log.debug "In checkMotionTurnOff scheduled method"
+
+    def motionState = motionSensor.currentState("motion")
+
+    if (motionState.value == "inactive") {
+        // get the time elapsed between now and when the motion reported inactive
+        def elapsed = now() - motionState.date.time
+
+        // elapsed time is in milliseconds, so the threshold must be converted to milliseconds too
+        def threshold = 1000 * 60 * minutesInactive
+
+        if (elapsed >= threshold) {
+            log.debug "Motion has stayed inactive long enough since last check ($elapsed ms):  turning switch off"
+            tvOutlet.off()
+        } else {
+            log.debug "Motion has not stayed inactive long enough since last check ($elapsed ms):  doing nothing"
+        }
+    } else {
+        // Motion active; just log it and do nothing
+        log.debug "Motion is active, do nothing and wait for inactive"
+    }
+} 
+
+
+
+mappings {
+  path("/switches") {
+    action: [
+      GET: "listSwitches"
+    ]
+  }
+  path("/switches/:command") {
+    action: [
+      PUT: "updateSwitches"
+    ]
+  }
+}
+
+// returns a list like
+// [[name: "kitchen lamp", value: "off"], [name: "bathroom", value: "on"]]
+def listSwitches() {
+
+    def resp = []
+    switches.each {
+        resp << [name: it.displayName, value: it.currentValue("switch")]
+    }
+    return resp
+}
+
+void updateSwitches() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+
+    // all switches have the comand
+    // execute the command on all switches
+    // (note we can do this on the array - the command will be invoked on every element
+    switch(command) {
+        case "on":
+            switches.on()
+            break
+        case "off":
+            switches.off()
+            break
+        default:
+            httpError(400, "$command is not a valid command for all switches specified")
+    }
+
+}
+
+
+