MSA-1822: A simple utility SmartApp that detects a switch ON condition and after a user-defined delay sets the switch to OFF. May be used anywhere a short on/off pulse of a few seconds is needed. The ON state can be triggered by any sensor or button or timer App. This SmartApp has many potential applications, including pet/fish feeder, garage door opener/closer, door buzzer, visitor welcome light, and more.

2026-03-09 13:21:53 +00:00 · 2017-03-06 20:13:28 -08:00
43 changed files with 482 additions and 631 deletions
--- a/build.gradle
+++ b/build.gradle
@@ -9,7 +9,7 @@ apply plugin: 'smartthings-slack'

 buildscript {
    dependencies {
-        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.11"
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.8"
    }
    repositories {
        mavenLocal()
--- a/devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy
+++ b/devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy
@@ -21,30 +21,28 @@ metadata {
 		capability "Tamper Alert"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
-		capability "Health Check"
-
-		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
-		fingerprint mfr:"010F", prod:"0B01", model:"2002"
-		fingerprint mfr:"010F", prod:"0B01", model:"1002"
+        
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
 	}

 	simulator {
+    
 	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
-			tileAttribute("device.water", key:"PRIMARY_CONTROL") {
-				attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#00a0dc")
-				attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#e86d13")
-			}
-			
-			tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+    
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.water", key:"PRIMARY_CONTROL") {
+            	attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#00a0dc")
+            	attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#e86d13")
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
 				attributeState("active", label:'tamper active', backgroundColor:"#00a0dc")
 				attributeState("inactive", label:'tamper inactive', backgroundColor:"#cccccc")
-			}
-		}
-		
-		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			}       
+        }
+        
+        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°',
 			backgroundColors:[
 				[value: 31, color: "#153591"],
@@ -56,22 +54,22 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-
-		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-
-		main "FGFS"
-		details(["FGFS","battery", "temperature"])
-	}
+       	        
+        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        	state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        main "FGFS"
+        details(["FGFS","battery", "temperature"])
+    }
 }

 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
 	def result = []
-
-	if (description.startsWith("Err 106")) {
+    
+    if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
 		} else {
@@ -86,13 +84,13 @@ def parse(String description) {
 	} else if (description == "updated") {
 		return null
 	} else {
-		def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72:2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+        def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72:2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])

-		if (cmd) {
-			log.debug "Parsed '${cmd}'"
-			zwaveEvent(cmd)
-		}
-	}
+        if (cmd) {
+            log.debug "Parsed '${cmd}'"
+            zwaveEvent(cmd)
+        }
+    }
 }

 //security
@@ -109,7 +107,7 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulat
 //crc16
 def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
 {
-	def versions = [0x31: 5, 0x72: 2, 0x80: 1]
+    def versions = [0x31: 5, 0x72: 2, 0x80: 1]
 	def version = versions[cmd.commandClass as Integer]
 	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
 	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
@@ -123,124 +121,105 @@ def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
 {
 	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
-	def cmds = []
-	// cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
-	// cmds << "delay 500"
-	cmds << encap(zwave.batteryV1.batteryGet())
-	[event, response(cmds)]
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))    
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
 }

 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-	log.debug "manufacturerName: ${cmd.manufacturerName}"
-	log.debug "productId:        ${cmd.productId}"
-	log.debug "productTypeId:    ${cmd.productTypeId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
 }

 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
 	log.debug "deviceIdData:                ${cmd.deviceIdData}"
-	log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
-	log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
-	log.debug "deviceIdType:                ${cmd.deviceIdType}"
-
-	if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) { //serial number in binary format
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
 		String serialNumber = "h'"
-
-		cmd.deviceIdData.each{ data ->
-			serialNumber += "${String.format("%02X", data)}"
-		}
-
-		updateDataValue("serialNumber", serialNumber)
-		log.debug "${device.displayName} - serial number: ${serialNumber}"
-	}
-
-	def response_cmds = []
-	if (!device.currentState("temperature")) {
-		response_cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
-	}
-	if (!getDataValue("version") && !zwaveInfo.ver) {
-		log.debug "Requesting Version Report"
-		response_cmds << "delay 500"
-		response_cmds << encap(zwave.versionV1.versionGet())
-	}
-	response_cmds << "delay 1000"
-	response_cmds << encap(zwave.wakeUpV2.wakeUpNoMoreInformation())
-	[[:], response(response_cmds)]
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
 }

-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
-	updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
-	log.debug "applicationVersion:      ${cmd.applicationVersion}"
-	log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
-	log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
-	log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
-	log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
 }

 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def result = []
 	def map = [:]
 	map.name = "battery"
 	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
 	map.unit = "%"
-
-	result << createEvent(map)
-
-	if (!getDataValue("serialNumber")) {
-		result << response(encap(zwave.manufacturerSpecificV2.deviceSpecificGet()))
-	} else {
-		result << response(encap(zwave.wakeUpV2.wakeUpNoMoreInformation()))
-	}
-	result
+	map.displayed = true
+	createEvent(map)
 }

 def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
 	def map = [:]
-	if (cmd.notificationType == 5) {
-		switch (cmd.event) {
-			case 2:
-				map.name = "water"
-				map.value = "wet"
-				map.descriptionText = "${device.displayName} is ${map.value}"
+    if (cmd.notificationType == 5) {
+    	switch (cmd.event) {                
+        	case 2:
+            	map.name = "water"
+                map.value = "wet"
+                map.descriptionText = "${device.displayName} is ${map.value}"
+            	break
+                
+            case 0:
+            	map.name = "water"
+                map.value = "dry"
+                map.descriptionText = "${device.displayName} is ${map.value}"
+            	break
+        }
+    } else if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	map.name = "tamper"
+                map.value = "inactive"
+                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
 				break
-
-			case 0:
-				map.name = "water"
-				map.value = "dry"
-				map.descriptionText = "${device.displayName} is ${map.value}"
-				break
-		}
-	} else if (cmd.notificationType == 7) {
-		switch (cmd.event) {
-			case 0:
-				map.name = "tamper"
-				map.value = "inactive"
-				map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
-				break
-
-			case 3:
-				map.name = "tamper"
-				map.value = "active"
-				map.descriptionText = "${device.displayName}: tamper alarm activated"
-				break
-		}
-	}
-
-	createEvent(map)
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+        }
+    }
+    
+    createEvent(map)
 }

 def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
 	def map = [:]
 	if (cmd.sensorType == 1) {
-		// temperature
-		def cmdScale = cmd.scale == 1 ? "F" : "C"
-		map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
-		map.unit = getTemperatureScale()
-		map.name = "temperature"
-		map.displayed = true
+        // temperature
+        def cmdScale = cmd.scale == 1 ? "F" : "C"
+        map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+        map.unit = getTemperatureScale()
+        map.name = "temperature"
+        map.displayed = true
 	}
-
-	createEvent(map)
+	
+    createEvent(map)
 }

 def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
@@ -249,18 +228,19 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca

 def configure() {
 	log.debug "Executing 'configure'"
-	// Device wakes up every 4 hours, this interval of 8h 2m allows us to miss one wakeup notification before marking offline
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	
+    def cmds = []
+    
+	cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGFS' default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()

-	// default initial state
-	sendEvent(name: "water", value: "dry")
-
-	def cmds = []
-
-	cmds << zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
-	cmds << zwave.batteryV1.batteryGet()  // other queries sent as response to BatteryReport
-
-	encapSequence(cmds, 200)
+	encapSequence(cmds, 500)
 }

 private secure(physicalgraph.zwave.Command cmd) {
@@ -269,7 +249,7 @@ private secure(physicalgraph.zwave.Command cmd) {

 private crc16(physicalgraph.zwave.Command cmd) {
 	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
-	"5601${cmd.format()}0000"
+    "5601${cmd.format()}0000"
 }

 private encapSequence(commands, delay=200) {
@@ -277,10 +257,13 @@ private encapSequence(commands, delay=200) {
 }

 private encap(physicalgraph.zwave.Command cmd) {
-	if (zwaveInfo.zw && !zwaveInfo.zw.contains("s")) {
-		// Secure inclusion failed
-		crc16(cmd)
-	} else {
-		secure(cmd)
-	}
-}
+	def secureClasses = [0x20, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+
+	//todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}
--- a/devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy
+++ b/devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy
@@ -22,7 +22,6 @@ metadata {
 		capability "Sensor"
 		capability "Tamper Alert"
 		capability "Temperature Measurement"
-		capability "Health Check"
        
        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x30, 0x9C, 0x98, 0x7A", outClusters: ""
 	}
@@ -241,9 +240,7 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca

 def configure() {
 	log.debug "Executing 'configure'"
-	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
+    
    def cmds = []
    
    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds: 7200, nodeid: zwaveHubNodeId)//FGMS' default wake up interval
--- a/devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy
+++ b/devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy
@@ -40,10 +40,10 @@ metadata {
    // UI tile definitions
    tiles {
        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", action: "switch.off", icon: "st.vents.vent-open-text", backgroundColor: "#00a0dc"
+            state "on", action: "switch.off", icon: "st.vents.vent-open-text", backgroundColor: "#53a7c0"
            state "off", action: "switch.on", icon: "st.vents.vent-closed", backgroundColor: "#ffffff"
-            state "obstructed", action: "clearObstruction", icon: "st.vents.vent-closed", backgroundColor: "#e86d13"
-            state "clearing", action: "", icon: "st.vents.vent-closed", backgroundColor: "#ffffff"
+            state "obstructed", action: "clearObstruction", icon: "st.vents.vent-closed", backgroundColor: "#ff0000"
+            state "clearing", action: "", icon: "st.vents.vent-closed", backgroundColor: "#ffff33"
        }
        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
            state "level", action:"switch level.setLevel"
--- a/devicetypes/roomieremote-agent/simple-sync.src/simple-sync.groovy
+++ b/devicetypes/roomieremote-agent/simple-sync.src/simple-sync.groovy
@@ -22,7 +22,7 @@ metadata
    {
 		standardTile("mainTile", "device.status", width: 1, height: 1, icon: "st.Entertainment.entertainment11")
        {
-        	state "default", label: "Simple Sync", icon: "st.Home.home2", backgroundColor: "#00a0dc"
+        	state "default", label: "Simple Sync", icon: "st.Home.home2", backgroundColor: "#55A7FF"
 		}
        
    	def detailTiles = ["mainTile"]
--- a/devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy
+++ b/devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy
@@ -82,8 +82,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
--- a/devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy
+++ b/devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy
@@ -64,8 +64,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00a0dc"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
--- a/devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy
+++ b/devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy
@@ -59,8 +59,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00a0dc"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
--- a/devicetypes/smartthings/aeon-secure-smart-energy-switch-uk.src/aeon-secure-smart-energy-switch-uk.groovy
+++ b/devicetypes/smartthings/aeon-secure-smart-energy-switch-uk.src/aeon-secure-smart-energy-switch-uk.groovy
@@ -53,7 +53,7 @@ metadata {
 	// tile definitions
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 		valueTile("power", "device.power", decoration: "flat") {
--- a/devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy
+++ b/devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy
@@ -42,8 +42,8 @@ metadata {

 	tiles {
 		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#00a0dc"
-			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
+			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
+			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ebeef2"
 		}
 		standardTile("beep", "device.beep", decoration: "flat") {
 			state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"
--- a/devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy
+++ b/devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy
@@ -67,10 +67,10 @@ metadata {
    }

    standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        state "on", label: '${name}', action: "forceOff", icon: "st.Electronics.electronics16", backgroundColor: "#00a0dc", nextState:"turningOff"
+        state "on", label: '${name}', action: "forceOff", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
        state "turningOff", label:'TURNING OFF', icon:"st.Electronics.electronics16", backgroundColor:"#ffffff"
        state "off", label: '${name}', action: "forceOn", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
-        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#00a0dc"
+        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#79b821"
    }
    valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
        state "station1", label:'${currentValue}', action:"preset1"
--- a/devicetypes/smartthings/ct100-thermostat.src/ct100-thermostat.groovy
+++ b/devicetypes/smartthings/ct100-thermostat.src/ct100-thermostat.groovy
@@ -81,13 +81,13 @@ metadata {
 			state "fanCirculate", label:'${name}', action:"switchFanMode"
 		}
 		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setHeatingSetpoint", action:"quickSetHeat", backgroundColor:"#e86d13"
+			state "setHeatingSetpoint", action:"quickSetHeat", backgroundColor:"#d04e00"
 		}
 		valueTile("heatingSetpoint", "device.heatingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "heat", label:'${currentValue}° heat', backgroundColor:"#ffffff"
 		}
 		controlTile("coolSliderControl", "device.coolingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setCoolingSetpoint", action:"quickSetCool", backgroundColor: "#00a0dc"
+			state "setCoolingSetpoint", action:"quickSetCool", backgroundColor: "#1e9cbb"
 		}
 		valueTile("coolingSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "cool", label:'${currentValue}° cool', backgroundColor:"#ffffff"
--- a/devicetypes/smartthings/econet-vent.src/econet-vent.groovy
+++ b/devicetypes/smartthings/econet-vent.src/econet-vent.groovy
@@ -53,7 +53,7 @@ metadata {

 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", action:"switch.off", icon:"st.vents.vent-open-text", backgroundColor:"#00a0dc"
+			state "on", action:"switch.off", icon:"st.vents.vent-open-text", backgroundColor:"#53a7c0"
 			state "off", action:"switch.on", icon:"st.vents.vent-closed", backgroundColor:"#ffffff"
 		}
        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
--- a/devicetypes/smartthings/fibaro-dimmer.src/fibaro-dimmer.groovy
+++ b/devicetypes/smartthings/fibaro-dimmer.src/fibaro-dimmer.groovy
@@ -56,9 +56,9 @@ metadata {

 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00a0dc", nextState:"turningOff"
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00a0dc", nextState:"turningOff"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 		}
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
--- a/devicetypes/smartthings/fibaro-flood-sensor.src/fibaro-flood-sensor.groovy
+++ b/devicetypes/smartthings/fibaro-flood-sensor.src/fibaro-flood-sensor.groovy
@@ -1,12 +1,12 @@
 /**
 *  Device Type Definition File
 *
- *  Device Type:        Fibaro Flood Sensor
- *  File Name:          fibaro-flood-sensor.groovy
- *  Initial Release:    2014-12-10
- *  @author:            Todd Wackford
- *  Email:              todd@wackford.net
- *  @version:           1.0
+ *  Device Type:		Fibaro Flood Sensor
+ *  File Name:			fibaro-flood-sensor.groovy
+ *	Initial Release:	2014-12-10
+ *	@author:			Todd Wackford
+ *  Email:				todd@wackford.net
+ *  @version:			1.0
 *
 *  Copyright 2014 SmartThings
 *
@@ -26,8 +26,8 @@
 * not displayed to the user. We do this so we can receive events and display on device 
 * activity. If the user wants to display the tamper tile, adjust the tile display lines
 * with the following:
- *      main(["water", "temperature", "tamper"])
- *      details(["water", "temperature", "battery", "tamper"])
+ *		main(["water", "temperature", "tamper"])
+ *		details(["water", "temperature", "battery", "tamper"])
 *
 * @param none
 *
@@ -39,18 +39,13 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Configuration"
 		capability "Battery"
-		capability "Health Check"
-    capability "Sensor"
-    
-		command    "resetParams2StDefaults"
-		command    "listCurrentParams"
-		command    "updateZwaveParam"
-		command    "test"
-
+       
+        command		"resetParams2StDefaults"
+        command		"listCurrentParams"
+        command		"updateZwaveParam"
+        command		"test"
+        
 		fingerprint deviceId: "0xA102", inClusters: "0x30,0x9C,0x60,0x85,0x8E,0x72,0x70,0x86,0x80,0x84"
-		fingerprint mfr:"010F", prod:"0000", model:"2002"
-		fingerprint mfr:"010F", prod:"0000", model:"1002"
-		fingerprint mfr:"010F", prod:"0B00", model:"1001"
 	}

 	simulator {
@@ -77,7 +72,7 @@ metadata {
 	tiles {
 		standardTile("water", "device.water", width: 2, height: 2) {
 			state "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#00a0dc"
+			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
@@ -91,9 +86,9 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-		standardTile("tamper", "device.tamper") {
-			state("secure",         label:"secure",         icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
-			state("tampered",       label:"tampered",       icon:"st.locks.lock.unlocked", backgroundColor:"#00a0dc")
+        standardTile("tamper", "device.tamper") {
+			state("secure", 	label:"secure",   	icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
+			state("tampered", 	label:"tampered", 	icon:"st.locks.lock.unlocked", backgroundColor:"#53a7c0")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -111,17 +106,26 @@ metadata {
 def parse(String description)
 {
 	def result = []
-
-	def cmd = zwave.parse(description, [0x31: 2, 0x30: 1, 0x70: 2, 0x71: 1, 0x84: 1, 0x80: 1, 0x9C: 1, 0x72: 2, 0x56: 2, 0x60: 3])
-
-	if (cmd) {
-		result += zwaveEvent(cmd) //createEvent(zwaveEvent(cmd))   
-	}
-
-	if ( result[0] != null ) {
+	
+    if (description == "updated") {
+    	if (!state.MSR) {
+			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds: 60*60, nodeid:zwaveHubNodeId))
+			result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		} 
+    } else {
+		def cmd = zwave.parse(description, [0x31: 2, 0x30: 1, 0x70: 2, 0x71: 1, 0x84: 1, 0x80: 1, 0x9C: 1, 0x72: 2, 0x56: 2, 0x60: 3])
+    
+		if (cmd) {
+			result += zwaveEvent(cmd) //createEvent(zwaveEvent(cmd))   
+		}
+    }
+    
+    result << response(zwave.batteryV1.batteryGet().format())
+    
+    if ( result[0] != null ) {
 		log.debug "Parse returned ${result}"
 		result
-	}
+    }
 }


@@ -138,9 +142,10 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 	def result = [createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)]
 	if (!isConfigured()) {
 		// we're still in the process of configuring a newly joined device
-		result << lateConfigure(true)
+		result += lateConfigure(true)
 	} else {
-		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+		result += response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+        log.debug "We're done with WakeUp!"
 	}
 	result
 }
@@ -148,7 +153,7 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd)
 {
 	def map = [:]
-
+    
 	switch (cmd.sensorType) {
 		case 1:
 			// temperature
@@ -179,7 +184,7 @@ def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cm
 	def map = [:]
 	map.value = cmd.sensorValue ? "active" : "inactive"
 	map.name = "acceleration"
-
+    
 	if (map.value == "active") {
 		map.descriptionText = "$device.displayName detected vibration"
 	}
@@ -194,49 +199,49 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport
 }

 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	log.debug "BasicSet with CMD = ${cmd}"
-
-	if (!isConfigured()) {
-		def result = []
-		def map = [:]
-
-		map.name = "water"
+    log.debug "BasicSet with CMD = ${cmd}"
+    
+    if (!isConfigured()) {
+    	def result = []
+    	def map = [:]
+    
+    	map.name = "water"
 		map.value = cmd.value ? "wet" : "dry"
 		map.descriptionText = "${device.displayName} is ${map.value}"
-
-		// If we are getting a BasicSet, and isConfigured == false, then we are likely NOT properly configured.
-		result += lateConfigure(true)
-
-		result << createEvent(map)
-
-		result
-	}
+    
+    	// If we are getting a BasicSet, and isConfigured == false, then we are likely NOT properly configured.
+    	result += lateConfigure(true)
+    
+    	result << createEvent(map)
+        
+        result
+    }
 }

 def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
 {
 	def map = [:]
-
+    
 	if (cmd.sensorType == 0x05) {
 		map.name = "water"
 		map.value = cmd.sensorState ? "wet" : "dry"
 		map.descriptionText = "${device.displayName} is ${map.value}"
-
-		log.debug "CMD = SensorAlarmReport: ${cmd}"
-		setConfigured()
-	} else if ( cmd.sensorType == 0) {
-		map.name = "tamper"
-		map.isStateChange = true
-		map.value = cmd.sensorState ? "tampered" : "secure"
-		map.descriptionText = "${device.displayName} has been tampered with"
-		runIn(30, "resetTamper") //device does not send alarm cancelation
-
-	} else if ( cmd.sensorType == 1) {
-		map.name = "tamper"
-		map.value = cmd.sensorState ? "tampered" : "secure"
-		map.descriptionText = "${device.displayName} has been tampered with"
-		runIn(30, "resetTamper") //device does not send alarm cancelation
-
+        
+        log.debug "CMD = SensorAlarmReport: ${cmd}"
+    	setConfigured()
+    } else if ( cmd.sensorType == 0) {
+    	map.name = "tamper"
+        map.isStateChange = true
+        map.value = cmd.sensorState ? "tampered" : "secure"
+        map.descriptionText = "${device.displayName} has been tampered with"
+        runIn(30, "resetTamper") //device does not send alarm cancelation
+        
+    } else if ( cmd.sensorType == 1) {
+    	map.name = "tamper"
+        map.value = cmd.sensorState ? "tampered" : "secure"
+        map.descriptionText = "${device.displayName} has been tampered with"
+        runIn(30, "resetTamper") //device does not send alarm cancelation
+        
 	} else {
 		map.descriptionText = "${device.displayName}: ${cmd}"
 	}
@@ -245,10 +250,10 @@ def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)

 def resetTamper() {
 	def map = [:]
-	map.name = "tamper"
-	map.value = "secure"
-	map.descriptionText = "$device.displayName is secure"
-	sendEvent(map)
+    map.name = "tamper"
+    map.value = "secure"
+    map.descriptionText = "$device.displayName is secure"
+    sendEvent(map)
 }

 def zwaveEvent(physicalgraph.zwave.Command cmd) {
@@ -262,10 +267,10 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
 	log.debug "msr: $msr"
 	device.updateDataValue(["MSR", msr])
-
-	if ( msr == "010F-0B00-2001" ) { //this is the msr and device type for the fibaro flood sensor
-		result += lateConfigure(true)
-	}
+    
+    if ( msr == "010F-0B00-2001" ) { //this is the msr and device type for the fibaro flood sensor
+    	result += lateConfigure(true)
+    }

 	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
 	result
@@ -277,17 +282,17 @@ def setConfigured() {

 def isConfigured() {
 	Boolean configured = device.getDataValue(["configured"]) as Boolean
-
-	return configured
+    
+    return configured
 }

 def lateConfigure(setConf = False) {
 	def res = response(configure())
-
-	if (setConf)
-		setConfigured()
-
-	return res
+    
+    if (setConf)
+        setConfigured()
+        
+    return res
 }

 /**
@@ -299,34 +304,26 @@ def lateConfigure(setConf = False) {
 */
 def configure() {
 	log.debug "Configuring Device..."
-	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
-	// default initial state
-	sendEvent(name: "water", value: "dry")
-
-	def cmds = []
-
-	// send associate to group 2 to get alarm data
-	cmds << zwave.associationV2.associationSet(groupingIdentifier:2, nodeId:[zwaveHubNodeId]).format()
-
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [255], parameterNumber: 5, size: 1).format()
-
-	// send associate to group 3 to get sensor data reported only to hub
-	cmds << zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format()
-
-	// reporting frequency of temps and battery set to one hour
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60], parameterNumber: 10, size: 2).format()
-	// cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
+    def cmds = []
+    
+    // send associate to group 2 to get alarm data
+    cmds << zwave.associationV2.associationSet(groupingIdentifier:2, nodeId:[zwaveHubNodeId]).format()
+    
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], parameterNumber: 5, size: 1).format()
+    
+    // send associate to group 3 to get sensor data reported only to hub
+    cmds << zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format()

 	// temp hysteresis set to .5 degrees celcius
 	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50], parameterNumber: 12, size: 2).format()
-	// cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
-
-	cmds << zwave.batteryV1.batteryGet().format()
-
-	cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()

+	// reporting frequency of temps and battery set to one hour
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60], parameterNumber: 10, size: 2).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
+    
+    cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+    
 	delayBetween(cmds, 100)
 }

@@ -352,18 +349,18 @@ def test() {
 * @return none
 */
 def updateZwaveParam(params) {
-	if ( params ) {
-		def pNumber = params.paramNumber
-		def pSize	= params.size
-		def pValue	= [params.value]
-		log.debug "Make sure device is awake and in recieve mode (triple-click?)"
-		log.debug "Updating ${device.displayName} parameter number '${pNumber}' with value '${pValue}' with size of '${pSize}'"
+	if ( params ) {     
+        def pNumber = params.paramNumber
+        def pSize	= params.size
+        def pValue	= [params.value]
+        log.debug "Make sure device is awake and in recieve mode (triple-click?)"
+        log.debug "Updating ${device.displayName} parameter number '${pNumber}' with value '${pValue}' with size of '${pSize}'"

 		def cmds = []
-		cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
-		cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
-		delayBetween(cmds, 1000)
-	}
+        cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
+        cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
+        delayBetween(cmds, 1000)        
+    }
 }

 /**
@@ -380,26 +377,26 @@ def updateZwaveParam(params) {
 def resetParams2StDefaults() {
 	log.debug "Resetting ${device.displayName} parameters to SmartThings compatible defaults"
 	def cmds = []
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 1,	 size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [3],				parameterNumber: 2,	 size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [255],			parameterNumber: 5,	 size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [255],			parameterNumber: 7,	 size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [1],				parameterNumber: 9,	 size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60],		parameterNumber: 10, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50],			parameterNumber: 12, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 13, size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [5,220],			parameterNumber: 50, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [13,172],		parameterNumber: 51, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0,0,225],		parameterNumber: 61, size: 4).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,255,0,0],		parameterNumber: 62, size: 4).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [2],				parameterNumber: 63, size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 73, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [2],				parameterNumber: 74, size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 75, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 76, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 77, size: 1).format()
-
-	delayBetween(cmds, 1200)
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 1,  size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [3], 			parameterNumber: 2,  size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], 			parameterNumber: 5,  size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], 			parameterNumber: 7,  size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [1], 			parameterNumber: 9,  size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60], 		parameterNumber: 10, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50], 			parameterNumber: 12, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 13, size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [5,220], 		parameterNumber: 50, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [13,172],		parameterNumber: 51, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0,0,225],		parameterNumber: 61, size: 4).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,255,0,0], 	parameterNumber: 62, size: 4).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [2], 			parameterNumber: 63, size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 73, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [2], 			parameterNumber: 74, size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 75, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 76, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0], 			parameterNumber: 77, size: 1).format()
+    
+    delayBetween(cmds, 1200)
 }

 /**
@@ -416,25 +413,25 @@ def resetParams2StDefaults() {
 def listCurrentParams() {
 	log.debug "Listing of current parameter settings of ${device.displayName}"
 	def cmds = []
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 1).format() 
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 2).format() 
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 5).format() 
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 7).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 9).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 13).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 50).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 51).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 61).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 62).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 63).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 73).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 74).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 75).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 76).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 77).format()
-
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 1).format() 
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 2).format() 
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 5).format() 
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 7).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 9).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 13).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 50).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 51).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 61).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 62).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 63).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 73).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 74).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 75).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 76).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 77).format()
+    
 	delayBetween(cmds, 1200)
 }

--- a/devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy
+++ b/devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy
@@ -46,7 +46,6 @@
 		capability 	"Illuminance Measurement"
 		capability 	"Sensor"
 		capability 	"Battery"
-		capability  "Health Check"
        
        command		"resetParams2StDefaults"
        command		"listCurrentParams"
@@ -82,8 +81,8 @@

 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00a0dc"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
@@ -126,9 +125,6 @@
 */
 def configure() {
 	log.debug "Configuring Device For SmartThings Use"
-	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
    def cmds = []
    
    // send associate to group 3 to get sensor data reported only to hub
--- a/devicetypes/smartthings/homeseer-multisensor.src/homeseer-multisensor.groovy
+++ b/devicetypes/smartthings/homeseer-multisensor.src/homeseer-multisensor.groovy
@@ -39,8 +39,8 @@ metadata {

 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
--- a/devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy
+++ b/devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy
@@ -21,7 +21,6 @@ metadata {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
-		capability "Sensor"
        
        command "enrollResponse"

@@ -32,8 +31,8 @@ metadata {

 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
 		}
        
         valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
--- a/devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy
+++ b/devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy
@@ -24,7 +24,6 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Health Check"
-		capability "Sensor"

 		command "enrollResponse"

@@ -42,8 +41,8 @@ metadata {

 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00a0dc")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}

 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
--- a/devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy
@@ -33,7 +33,6 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-L", deviceJoinName: "Iris Smart Water Sensor"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-G", deviceJoinName: "Centralite Water Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}

@@ -59,7 +58,7 @@ metadata {
 		multiAttributeTile(name: "water", type: "generic", width: 6, height: 4) {
 			tileAttribute("device.water", key: "PRIMARY_CONTROL") {
 				attributeState "dry", label: "Dry", icon: "st.alarm.water.dry", backgroundColor: "#ffffff"
-				attributeState "wet", label: "Wet", icon: "st.alarm.water.wet", backgroundColor: "#00A0DC"
+				attributeState "wet", label: "Wet", icon: "st.alarm.water.wet", backgroundColor: "#53a7c0"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
--- a/devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy
@@ -34,7 +34,6 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326-L", deviceJoinName: "Iris Motion Sensor"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3328-G", deviceJoinName: "Centralite Micro Motion Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv5", deviceJoinName: "Motion Sensor"
 	}
--- a/devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy
+++ b/devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy
@@ -30,8 +30,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 			}
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
--- a/devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy
@@ -33,7 +33,6 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3323-G", deviceJoinName: "Centralite Micro Door Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"

 		attribute "status", "string"
--- a/devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy
+++ b/devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy
@@ -52,14 +52,14 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"##e86d13"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00a0dc"
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
 			}
 		}

 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#00a0dc")
-			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#cccccc")
+			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°',
--- a/devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy
@@ -45,8 +45,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name: "contact", type: "generic", width: 6, height: 4) {
 			tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
-				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
+				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
+				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
 			}
 		}

--- a/devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy
+++ b/devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy
@@ -41,8 +41,8 @@ metadata {

 	tiles {
    	standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}

 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
--- a/devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy
+++ b/devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy
@@ -44,7 +44,7 @@ metadata {
    tiles {
        standardTile("button", "device.button", width: 2, height: 2) {
            state "default", label: "", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
-            state "button 1 pushed", label: "pushed #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#00A0DC"
+            state "button 1 pushed", label: "pushed #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#79b821"
        }

        valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
--- a/devicetypes/smartthings/zll-white-color-temperature-bulb-5000k.src/zll-white-color-temperature-bulb-5000k.groovy
+++ b/devicetypes/smartthings/zll-white-color-temperature-bulb-5000k.src/zll-white-color-temperature-bulb-5000k.groovy
@@ -1,169 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-import groovy.transform.Field
-
-@Field Boolean hasConfiguredHealthCheck = false
-
-metadata {
-    definition (name: "ZLL White Color Temperature Bulb 5000K", namespace: "smartthings", author: "SmartThings") {
-
-        capability "Actuator"
-        capability "Color Temperature"
-        capability "Configuration"
-        capability "Polling"
-        capability "Refresh"
-        capability "Switch"
-        capability "Switch Level"
-        capability "Health Check"
-
-        attribute "colorName", "string"
-        command "setGenericName"
-
-        fingerprint profileId: "C05E", deviceId: "0220", inClusters: "0000, 0004, 0003, 0006, 0008, 0005, 0300", outClusters: "0019", manufacturer: "Eaton", model: "Halo_LT01", deviceJoinName: "Halo RL56 Wireless"
-    }
-
-    // UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel"
-            }
-            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
-                attributeState "colorName", label:'${currentValue}'
-            }
-        }
-
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..5000)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
-
-        main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
-    }
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    log.debug "description is $description"
-    def event = zigbee.getEvent(description)
-    if (event) {
-        if (event.name == "colorTemperature") {
-            event.unit = "K"
-        }
-        sendEvent(event)
-    }
-    else {
-        log.warn "DID NOT PARSE MESSAGE for description : $description"
-        log.debug zigbee.parseDescriptionAsMap(description)
-    }
-}
-
-def off() {
-    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def on() {
-    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def setLevel(value) {
-    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()
-}
-
-def refresh() {
-	def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-
-	// Do NOT config if the device is the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, and maybe other weird things with the others
-    if (!((device.getDataValue("manufacturer") == "Eaton") && (device.getDataValue("model") == "Halo_LT01"))) {
-        cmds = cmds + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
-    }
-    
-	cmds
-}
-
-def poll() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-}
-
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return zigbee.levelRefresh()
-}
-
-def healthPoll() {
-    log.debug "healthPoll()"
-    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
-    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
-}
-
-def configureHealthCheck() {
-    Integer hcIntervalMinutes = 12
-    if (!hasConfiguredHealthCheck) {
-        log.debug "Configuring Health Check, Reporting"
-        unschedule("healthPoll")
-        runEvery5Minutes("healthPoll")
-        // Device-Watch allows 2 check-in misses from device
-        sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-        hasConfiguredHealthCheck = true
-    }
-}
-
-def configure() {
-    log.debug "configure()"
-    configureHealthCheck()
-    // Implementation note: for the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, so be sure this is before the call to onOffRefresh
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-}
-
-def updated() {
-    log.debug "updated()"
-    configureHealthCheck()
-}
-
-def setColorTemperature(value) {
-    setGenericName(value)
-    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
-}
-
-//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
-def setGenericName(value){
-    if (value != null) {
-        def genericName = ""
-        if (value < 3300) {
-            genericName = "Soft White"
-        } else if (value < 4150) {
-            genericName = "Moonlight"
-        } else if (value <= 5000) {
-            genericName = "Cool White"
-        } else {
-            genericName = "Daylight"
-        }
-        sendEvent(name: "colorName", value: genericName, displayed: false)
-    }
-}
--- a/devicetypes/smartthings/zwave-device-multichannel.src/zwave-device-multichannel.groovy
+++ b/devicetypes/smartthings/zwave-device-multichannel.src/zwave-device-multichannel.groovy
@@ -40,7 +40,7 @@ metadata {

 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.unknown.zwave.device", backgroundColor: "#00A0DC"
+			state "on", label: '${name}', action: "switch.off", icon: "st.unknown.zwave.device", backgroundColor: "#79b821"
 			state "off", label: '${name}', action: "switch.on", icon: "st.unknown.zwave.device", backgroundColor: "#ffffff"
 		}
 		standardTile("switchOn", "device.switch", inactiveLabel: false, decoration: "flat") {
--- a/devicetypes/smartthings/zwave-device.src/zwave-device.groovy
+++ b/devicetypes/smartthings/zwave-device.src/zwave-device.groovy
@@ -33,7 +33,7 @@ metadata {

 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.unknown.zwave.device", backgroundColor: "#00A0DC"
+			state "on", label: '${name}', action: "switch.off", icon: "st.unknown.zwave.device", backgroundColor: "#79b821"
 			state "off", label: '${name}', action: "switch.on", icon: "st.unknown.zwave.device", backgroundColor: "#ffffff"
 		}
 		standardTile("switchOn", "device.switch", inactiveLabel: false, decoration: "flat") {
--- a/devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy
+++ b/devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy
@@ -41,8 +41,8 @@ metadata {
 	// UI tile definitions
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
-			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
+			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
+			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""
--- a/devicetypes/smartthings/zwave-garage-door-opener.src/zwave-garage-door-opener.groovy
+++ b/devicetypes/smartthings/zwave-garage-door-opener.src/zwave-garage-door-opener.groovy
@@ -39,11 +39,11 @@ metadata {

 	tiles {
 		standardTile("toggle", "device.door", width: 2, height: 2) {
-			state("unknown", label:'${name}', action:"refresh.refresh", icon:"st.doors.garage.garage-open", backgroundColor:"#ffffff")
-			state("closed", label:'${name}', action:"door control.open", icon:"st.doors.garage.garage-closed", backgroundColor:"#00a0dc", nextState:"opening")
-			state("open", label:'${name}', action:"door control.close", icon:"st.doors.garage.garage-open", backgroundColor:"#e86d13", nextState:"closing")
-			state("opening", label:'${name}', icon:"st.doors.garage.garage-opening", backgroundColor:"#e86d13")
-			state("closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#00a0dc")
+			state("unknown", label:'${name}', action:"refresh.refresh", icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', action:"door control.open", icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821", nextState:"opening")
+			state("open", label:'${name}', action:"door control.close", icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e", nextState:"closing")
+			state("opening", label:'${name}', icon:"st.doors.garage.garage-opening", backgroundColor:"#ffe71e")
+			state("closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#ffe71e")
 			
 		}
 		standardTile("open", "device.door", inactiveLabel: false, decoration: "flat") {
--- a/devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy
+++ b/devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy
@@ -38,10 +38,10 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"toggle", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.lock", key: "PRIMARY_CONTROL") {
-				attributeState "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#00A0DC", nextState:"unlocking"
+				attributeState "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#79b821", nextState:"unlocking"
 				attributeState "unlocked", label:'unlocked', action:"lock.lock", icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff", nextState:"locking"
 				attributeState "unknown", label:"unknown", action:"lock.lock", icon:"st.locks.lock.unknown", backgroundColor:"#ffffff", nextState:"locking"
-				attributeState "locking", label:'locking', icon:"st.locks.lock.locked", backgroundColor:"#00A0DC"
+				attributeState "locking", label:'locking', icon:"st.locks.lock.locked", backgroundColor:"#79b821"
 				attributeState "unlocking", label:'unlocking', icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff"
 			}
 		}
--- a/devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy
+++ b/devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy
@@ -51,7 +51,7 @@ metadata {
 	// tile definitions
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 		valueTile("power", "device.power") {
--- a/devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy
+++ b/devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy
@@ -38,8 +38,8 @@ metadata {
 	
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state("battery", label:'${currentValue}% battery', unit:"")
--- a/devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy
+++ b/devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy
@@ -37,8 +37,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00a0dc"
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
 			}
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
--- a/devicetypes/smartthings/zwave-sensor.src/zwave-sensor.groovy
+++ b/devicetypes/smartthings/zwave-sensor.src/zwave-sensor.groovy
@@ -32,8 +32,8 @@ metadata {

 	tiles {
 		standardTile("sensor", "device.sensor", width: 2, height: 2) {
-			state("inactive", label:'inactive', icon:"st.unknown.zwave.sensor", backgroundColor:"#cccccc")
-			state("active", label:'active', icon:"st.unknown.zwave.sensor", backgroundColor:"#00A0DC")
+			state("inactive", label:'inactive', icon:"st.unknown.zwave.sensor", backgroundColor:"#ffffff")
+			state("active", label:'active', icon:"st.unknown.zwave.sensor", backgroundColor:"#53a7c0")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""
--- a/devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy
+++ b/devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy
@@ -47,7 +47,7 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 			}
 		}
--- a/devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy
+++ b/devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy
@@ -46,7 +46,7 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 			}
 		}
--- a/devicetypes/smartthings/zwave-water-sensor.src/zwave-water-sensor.groovy
+++ b/devicetypes/smartthings/zwave-water-sensor.src/zwave-water-sensor.groovy
@@ -33,7 +33,7 @@ metadata {
 	tiles {
 		standardTile("water", "device.water", width: 2, height: 2) {
 			state "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#00A0DC"
+			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""
--- a/smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy
+++ b/smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy
@@ -39,7 +39,7 @@ definition(
 *  garageDoors         | door          | open, close           | unknown, closed, open, closing, opening
 *  cameras             | image         | take                  | <String>
 *  thermostats         | thermostat    | setHeatingSetpoint,   | temperature, heatingSetpoint, coolingSetpoint,
- *	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
+ * 	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
 *                      |				| off, heat, cool, auto,| thermostatFanMode, thermostatOperatingState
 *                      |				| emergencyHeat,        |
 *                      |				| setThermostatMode,    |
@@ -55,7 +55,7 @@ preferences {
 		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false
 		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
 		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-		input "cameras", "capability.videoCapture", title: "Which Cameras?",  multiple: true, required: false
+		input "cameras", "capability.videoCapture", title: "Which Cameras?", multiple: true, required: false
 		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false
 		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false
 		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false
@@ -66,48 +66,54 @@ preferences {

 def getInputs() {
 	def inputList = []
-	inputList += contactSensors?: []
-	inputList += garageDoors?: []
-	inputList += locks?: []
-	inputList += cameras?: []
-	inputList += motionSensors?: []
-	inputList += presenceSensors?: []
-	inputList += switches?: []
-	inputList += thermostats?: []
-	inputList += waterSensors?: []
+	inputList += contactSensors ?: []
+	inputList += garageDoors ?: []
+	inputList += locks ?: []
+	inputList += cameras ?: []
+	inputList += motionSensors ?: []
+	inputList += presenceSensors ?: []
+	inputList += switches ?: []
+	inputList += thermostats ?: []
+	inputList += waterSensors ?: []
 	return inputList
 }

 //API external Endpoints
 mappings {
 	path("/subscriptionURL/:url") {
-		action: [
+		action:
+		[
 				PUT: "updateEndpointURL"
 		]
 	}
 	path("/connectionId/:connId") {
-		action: [
+		action:
+		[
 				PUT: "updateConnectionId"
 		]
 	}
 	path("/devices") {
-		action: [
+		action:
+		[
 				GET: "getDevices"
 		]
 	}
 	path("/devices/:id") {
-		action: [
+		action:
+		[
 				GET: "getDevice"
 		]
 	}
 	path("/update/:id") {
-		action: [
+		action:
+		[
 				PUT: "updateDevice"
 		]
 	}
 	path("/subscription/:id") {
-		action: [
-				POST: "registerDeviceChange",
+		action:
+		[
+				POST  : "registerDeviceChange",
 				DELETE: "unregisterDeviceChange"
 		]
 	}
@@ -139,7 +145,7 @@ def registerSubscriptions() {
 def registerChangeHandler(myList) {
 	myList.each { myDevice ->
 		def theAtts = myDevice.supportedAttributes
-		theAtts.each {att ->
+		theAtts.each { att ->
 			subscribe(myDevice, att.name, eventHandler)
 			log.info "Registering ${myDevice.displayName}.${att.name}"
 		}
@@ -151,7 +157,7 @@ def registerDeviceChange() {
 	def myDevice = findDevice(params.id)
 	def theAtts = myDevice.supportedAttributes
 	try {
-		theAtts.each {att ->
+		theAtts.each { att ->
 			subscribe(myDevice, att.name, eventHandler)
 			log.info "Registering ${myDevice.displayName}.${att.name}"
 		}
@@ -180,20 +186,16 @@ def eventHandler(evt) {
 	def evt_name = evt.name
 	def evt_device = evt.device
 	def evt_deviceType = getDeviceType(evt_device);
-	def deviceInfo
-
-	if(evt_deviceType == "thermostat")
-	{
-		deviceInfo = [name: evt_device.displayName, id: evt_device.id, status:evt_device.getStatus(), deviceType:evt_deviceType, manufacturer:evt_device.getManufacturerName(), model:evt_device.getModelName(), attributes: deviceAttributeList(evt_device), locationMode: getLocationModeInfo()]
-	}
-	else
-	{
-		deviceInfo = [name: evt_device.displayName, id: evt_device.id, status:evt_device.getStatus(), deviceType:evt_deviceType, manufacturer:evt_device.getManufacturerName(), model:evt_device.getModelName(), attributes: deviceAttributeList(evt_device)]
-	}
-
 	def params = [
-			uri: "${state.endpointURL}/${state.connectionId}",
-			body: [ deviceInfo ]
+			uri : "${state.endpointURL}/${state.connectionId}",
+			body: [
+					name        : evt_device.displayName,
+					id          : evt_device.id,
+					deviceType  : evt_deviceType,
+					manufacturer: evt_device.getManufacturerName(),
+					model       : evt_device.getModelName(),
+					attributes  : deviceAttributeList(evt_device)
+			]
 	]
 	try {
 		log.trace "POST URI: ${params.uri}"
@@ -228,13 +230,10 @@ def getDevices() {
 	def deviceData = []
 	inputs?.each {
 		def deviceType = getDeviceType(it)
-		if(deviceType == "thermostat")
-		{
-			deviceData << [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
-		}
-		else
-		{
-			deviceData << [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it)]
+		if (deviceType == "thermostat") {
+			deviceData << [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
+		} else {
+			deviceData << [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it)]
 		}
 	}

@@ -247,13 +246,10 @@ def getDevice() {
 	def it = findDevice(params.id)
 	def deviceType = getDeviceType(it)
 	def device
-	if(deviceType == "thermostat")
-	{
-		device = [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
-	}
-	else
-	{
-		device = [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it)]
+	if (deviceType == "thermostat") {
+		device = [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
+	} else {
+		device = [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it)]
 	}
 	log.debug "getDevice, return: ${device}"
 	return device
@@ -265,18 +261,18 @@ void updateDevice() {
 	request.JSON.each {
 		def command = it.key
 		def value = it.value
-		if (command){
+		if (command) {
 			def commandList = mapDeviceCommands(command, value)
 			command = commandList[0]
 			value = commandList[1]

 			if (command == "setAwayMode") {
 				log.info "Setting away mode to ${value}"
-				if (location.modes?.find {it.name == value}) {
+				if (location.modes?.find { it.name == value }) {
 					location.setMode(value)
 				}
-			}else if (command == "thermostatSetpoint"){
-				switch(device.currentThermostatMode){
+			} else if (command == "thermostatSetpoint") {
+				switch (device.currentThermostatMode) {
 					case "cool":
 						log.info "Update: ${device.displayName}, [${command}, ${value}]"
 						device.setCoolingSetpoint(value)
@@ -290,7 +286,7 @@ void updateDevice() {
 						httpError(501, "this mode: ${device.currentThermostatMode} does not allow changing thermostat setpoint.")
 						break
 				}
-			}else if (!device) {
+			} else if (!device) {
 				log.error "updateDevice, Device not found"
 				httpError(404, "Device not found")
 			} else if (!device.hasCommand(command)) {
@@ -300,11 +296,11 @@ void updateDevice() {
 				if (command == "setColor") {
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(hex: value)
-				} else if(value.isNumber()) {
+				} else if (value.isNumber()) {
 					def intValue = value as Integer
 					log.info "Update: ${device.displayName}, [${command}, ${intValue}(int)]"
 					device."$command"(intValue)
-				} else if (value){
+				} else if (value) {
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(value)
 				} else {
@@ -326,28 +322,19 @@ private getLocationModeInfo() {
 //Map each device to a type given it's capabilities
 private getDeviceType(device) {
 	def deviceType
-	def capabilities = device.capabilities
-	log.debug "capabilities: [${device}, ${capabilities}]"
+	def caps = device.capabilities
+	log.debug "capabilities: [${device}, ${caps}]"
 	log.debug "supported commands: [${device}, ${device.supportedCommands}]"
-
-	//Loop through the device capability list to determine the device type.
-	capabilities.each {capability ->
-		switch(capability.name.toLowerCase())
-		{
+	caps.each {
+		switch (it.name.toLowerCase()) {
 			case "switch":
 				deviceType = "switch"
-
-				//If the device also contains "Switch Level" capability, identify it as a "light" device.
-				if (capabilities.any{it.name.toLowerCase() == "switch level"}){
-
-					//If the device also contains "Power Meter" capability, identify it as a "dimmerSwitch" device.
-					if (capabilities.any{it.name.toLowerCase() == "power meter"}){
-						deviceType = "dimmerSwitch"
-						return deviceType
-					} else {
-						deviceType = "light"
-						return deviceType
-					}
+				if (caps.any { it.name.toLowerCase() == "power meter" }) {
+					return deviceType
+				}
+				if (caps.any { it.name.toLowerCase() == "switch level" }) {
+					deviceType = "light"
+					return deviceType
 				}
 				break
 			case "contact sensor":
@@ -388,16 +375,16 @@ private findDevice(deviceId) {

 //Return a list of device attributes
 private deviceAttributeList(device) {
-	device.supportedAttributes.collectEntries { attribute->
+	device.supportedAttributes.collectEntries { attribute ->
 		try {
-			[ (attribute.name): device.currentValue(attribute.name) ]
-		} catch(e) {
-			[ (attribute.name): null ]
+			[(attribute.name): device.currentValue(attribute.name)]
+		} catch (e) {
+			[(attribute.name): null]
 		}
 	}
 }

-//Map device command and value. 
+//Map device command and value.
 //input command and value are from UWP,
 //returns resultCommand and resultValue that corresponds with function and value in SmartApps
 private mapDeviceCommands(command, value) {
@@ -427,7 +414,7 @@ private mapDeviceCommands(command, value) {
 			resultCommand = "setSaturation"
 			resultValue = value
 			break
-		case "colorTemperature":
+		case "ct":
 			resultCommand = "setColorTemperature"
 			resultValue = value
 			break
@@ -464,8 +451,7 @@ private mapDeviceCommands(command, value) {
 			if (value == 1 || value == "1" || value == "lock") {
 				resultCommand = "lock"
 				resultValue = ""
-			}
-			else if (value == 0 || value == "0" || value == "unlock") {
+			} else if (value == 0 || value == "0" || value == "unlock") {
 				resultCommand = "unlock"
 				resultValue = ""
 			}
@@ -474,5 +460,6 @@ private mapDeviceCommands(command, value) {
 			break
 	}

-	return [resultCommand,resultValue]
+	return [resultCommand, resultValue]
 }
+
--- a/smartapps/smartthings/hue-connect.src/hue-connect.groovy
+++ b/smartapps/smartthings/hue-connect.src/hue-connect.groovy
@@ -472,6 +472,8 @@ def addBridge() {
 					log.error "Failed to create Hue Bridge device"
 				}
 			}
+		} else {
+			log.debug "found ${d.displayName} with id $selectedHue already exists"
 		}
 	}
 }
@@ -713,9 +715,6 @@ def doDeviceSync(){
 		log.warn "state.updating failed to clear"
 	}

-	if (selectedHue) {
-		addBridge()
-	}
 	convertBulbListToMap()
 	poll()
 	ssdpSubscribe()
@@ -1359,7 +1358,7 @@ private void createSwitchEvent(childDevice, setSwitch, setLevel = null) {
 private colorPointsForModel(model = null) {
 	def result = null
 	switch (model) {
-	// Gamut A
+		// Gamut A
 		case "LLC001": /* Monet, Renoir, Mondriaan (gen II) */
 		case "LLC005": /* Bloom (gen II) */
 		case "LLC006": /* Iris (gen III) */
@@ -1371,12 +1370,12 @@ private colorPointsForModel(model = null) {
 		case "LLC010": /* Hue Living Colors Iris + */
 			result = [r:[x: 0.704f, y: 0.296f], g:[x: 0.2151f, y: 0.7106f], b:[x: 0.138f, y: 0.08f]];
 			break
-	// Gamut C
+		// Gamut C
 		case "LLC020": /* Hue Go */
 		case "LST002": /* Hue LightStrips Plus */
 			result = [r:[x: 0.692f, y: 0.308f], g:[x: 0.17f, y: 0.7f], b:[x: 0.153f, y: 0.048f]];
 			break
-	// Gamut B
+		// Gamut B
 		case "LCT001": /* Hue A19 */
 		case "LCT002": /* Hue BR30 */
 		case "LCT003": /* Hue GU10 */
@@ -1804,3 +1803,4 @@ def hsvToHex(hue, sat, value = 100){

 	return "#$r1$g1$b1"
 }
+
--- a/smartapps/tchayes57/switch-off-after-delay.src/switch-off-after-delay.groovy
+++ b/smartapps/tchayes57/switch-off-after-delay.src/switch-off-after-delay.groovy
@@ -0,0 +1,65 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Monitors a switch for ON condition and switches OFF after time delay.
+ *
+ *  Author: SmartThings modified by TC Hayes
+ *
+ *  This app detects the ON status of a switch, waits X seconds, then switches off.
+ *  May be used anywhere a short on/off condition of a few seconds is needed, for example:
+ *  --- An automatic doorbell where a motion sensor switches ON a buzzer. This app terminates the buzz after X seconds. 
+ *  --- An automated pet/fish feeder where a separate timer app turns on the feed switch. This app turns off the flow after X seconds. Use along 
+ *      with a delay timer between feeds eg (Home Monitor / Custom / New Monitoring Rule ...). 
+ *  --- A garage door opener actuator where an on/off pulse of X seconds is needed to either open or close. Any other app can trigger
+ *      the ON condition by detecting motion, button operation of a button, or elapsed time. This app will teminate the pulse with an OFF signal. Use
+ *      ST Smart Home Monitor (Custom / New Monitoring Rule ... ) with this app to close a door left open.
+ *  --- Use with app 'Switch ON After Delay' to create a continuing on/off flashing sequence. (Lighthouse.)
+ **/
+definition(
+    name: "Switch OFF After Delay",
+    namespace: "tchayes57",
+    author: "tchayes57",
+    description: "Monitor switch and respond to an ON condition with OFF after X seconds.",
+    category: "Convenience",
+    )
+
+preferences {
+	section("Switch to be monitored ...") {
+		input "switch1", "capability.switch", required: true
+	}
+    
+    section("Set Delay")  {
+	    input "openTimer", "number", title: "Number of seconds delay", required: true
+		}
+}
+
+def installed() {
+	subscribe(app, appTouchHandler)
+	subscribeToCommand(switch1, "on", onCommand)
+}
+
+def updated() {
+	unsubscribe()
+	subscribe(app, appTouchHandler)
+	subscribeToCommand(switch1, "on", onCommand)
+}
+// identify transition to ON
+def appTouch(evt) {
+	log.debug "appTouch: $evt.value, $evt"
+	switch1?.on()
+}
+
+// initiate OFF after delay
+def onCommand(evt) {
+	log.debug "onCommand: $evt.value, $evt"
+	switch1?.off(delay: openTimer * 1000)
+}