MSA-1937: Smart bed

Rolling down staging hotfix to master

devicetypes/happy-new/kad.src/kad.groovy

@@ -0,0 +1,900 @@
+/**
+ *  kad
+ *
+ *  Copyright 2017 Kadeem Coleman
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "kad", namespace: "happy new ", author: "Kadeem Coleman") {
+		capability "Acceleration Sensor"
+		capability "Actuator"
+		capability "Alarm"
+		capability "Alarm System"
+		capability "Alarm System Arm Only"
+		capability "Astronomical Data"
+		capability "Audio Notification"
+		capability "Battery"
+		capability "Beacon"
+		capability "Bridge"
+		capability "Buffered Video Capture"
+		capability "Bulb"
+		capability "Button"
+		capability "Carbon Dioxide Measurement"
+		capability "Carbon Monoxide Detector"
+		capability "Color Control"
+		capability "Color Temperature"
+		capability "Configuration"
+		capability "Consumable"
+		capability "Contact Sensor"
+		capability "Door Control"
+		capability "Energy Meter"
+		capability "Estimated Time Of Arrival"
+		capability "Garage Door Control"
+		capability "Health Check"
+		capability "Image Capture"
+		capability "Indicator"
+		capability "Infrared Level"
+		capability "Light"
+		capability "Light"
+		capability "Lock"
+		capability "Lock Codes"
+		capability "Lock Only"
+		capability "Media Controller"
+		capability "Momentary"
+		capability "Motion Sensor"
+		capability "Music Player"
+		capability "Ocf"
+		capability "Outlet"
+		capability "pH Measurement"
+		capability "Polling"
+		capability "Power"
+		capability "Power Meter"
+		capability "Power Source"
+		capability "Presence Sensor"
+		capability "Refresh"
+		capability "Relay Switch"
+		capability "Samsung TV"
+		capability "Sensor"
+		capability "Shock Sensor"
+		capability "Signal Strength"
+		capability "Sleep Sensor"
+		capability "Smoke Detector"
+		capability "Sound Sensor"
+		capability "Speech Recognition"
+		capability "Speech Synthesis"
+		capability "Switch"
+		capability "Switch Level"
+		capability "Tamper Alert"
+		capability "Temperature Measurement"
+		capability "Test Capability"
+		capability "Thermostat"
+		capability "Thermostat Cooling Setpoint"
+		capability "Thermostat Fan Mode"
+		capability "Thermostat Heating Setpoint"
+		capability "Thermostat Mode"
+		capability "Thermostat Operating State"
+		capability "Thermostat Setpoint"
+		capability "Three Axis"
+		capability "Timed Session"
+		capability "Tone"
+		capability "Touch Sensor"
+		capability "Ultraviolet Index"
+		capability "Valve"
+		capability "Video Camera"
+		capability "Video Capture"
+		capability "Voltage Measurement"
+		capability "Water Sensor"
+		capability "Window Shade"
+		capability "Zw Multichannel"
+	}
+
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		// TODO: define your main and details tiles here
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+	// TODO: handle 'acceleration' attribute
+	// TODO: handle 'alarm' attribute
+	// TODO: handle 'alarmSystemStatus' attribute
+	// TODO: handle 'alarmSystemStatus' attribute
+	// TODO: handle 'sunrise' attribute
+	// TODO: handle 'sunset' attribute
+	// TODO: handle 'sunriseTime' attribute
+	// TODO: handle 'sunsetTime' attribute
+	// TODO: handle 'battery' attribute
+	// TODO: handle 'presence' attribute
+	// TODO: handle 'clip' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'button' attribute
+	// TODO: handle 'numberOfButtons' attribute
+	// TODO: handle 'carbonDioxide' attribute
+	// TODO: handle 'carbonMonoxide' attribute
+	// TODO: handle 'hue' attribute
+	// TODO: handle 'saturation' attribute
+	// TODO: handle 'color' attribute
+	// TODO: handle 'colorTemperature' attribute
+	// TODO: handle 'consumableStatus' attribute
+	// TODO: handle 'contact' attribute
+	// TODO: handle 'door' attribute
+	// TODO: handle 'energy' attribute
+	// TODO: handle 'eta' attribute
+	// TODO: handle 'door' attribute
+	// TODO: handle 'checkInterval' attribute
+	// TODO: handle 'image' attribute
+	// TODO: handle 'indicatorStatus' attribute
+	// TODO: handle 'infraredLevel' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'lock' attribute
+	// TODO: handle 'lock' attribute
+	// TODO: handle 'codeReport' attribute
+	// TODO: handle 'codeChanged' attribute
+	// TODO: handle 'lock' attribute
+	// TODO: handle 'activities' attribute
+	// TODO: handle 'currentActivity' attribute
+	// TODO: handle 'motion' attribute
+	// TODO: handle 'status' attribute
+	// TODO: handle 'level' attribute
+	// TODO: handle 'trackDescription' attribute
+	// TODO: handle 'trackData' attribute
+	// TODO: handle 'mute' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'pH' attribute
+	// TODO: handle 'powerSource' attribute
+	// TODO: handle 'power' attribute
+	// TODO: handle 'powerSource' attribute
+	// TODO: handle 'presence' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'volume' attribute
+	// TODO: handle 'mute' attribute
+	// TODO: handle 'pictureMode' attribute
+	// TODO: handle 'soundMode' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'messageButton' attribute
+	// TODO: handle 'shock' attribute
+	// TODO: handle 'lqi' attribute
+	// TODO: handle 'rssi' attribute
+	// TODO: handle 'sleeping' attribute
+	// TODO: handle 'smoke' attribute
+	// TODO: handle 'carbonMonoxide' attribute
+	// TODO: handle 'sound' attribute
+	// TODO: handle 'phraseSpoken' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'level' attribute
+	// TODO: handle 'tamper' attribute
+	// TODO: handle 'temperature' attribute
+	// TODO: handle 'temperature' attribute
+	// TODO: handle 'heatingSetpoint' attribute
+	// TODO: handle 'coolingSetpoint' attribute
+	// TODO: handle 'thermostatSetpoint' attribute
+	// TODO: handle 'thermostatMode' attribute
+	// TODO: handle 'thermostatFanMode' attribute
+	// TODO: handle 'thermostatOperatingState' attribute
+	// TODO: handle 'schedule' attribute
+	// TODO: handle 'coolingSetpointMin' attribute
+	// TODO: handle 'coolingSetpointMax' attribute
+	// TODO: handle 'heatingSetpointMin' attribute
+	// TODO: handle 'heatingSetpointMax' attribute
+	// TODO: handle 'thermostatSetpointMin' attribute
+	// TODO: handle 'thermostatSetpointMax' attribute
+	// TODO: handle 'coolingSetpointMin' attribute
+	// TODO: handle 'coolingSetpointMax' attribute
+	// TODO: handle 'heatingSetpointMin' attribute
+	// TODO: handle 'heatingSetpointMax' attribute
+	// TODO: handle 'thermostatSetpointMin' attribute
+	// TODO: handle 'thermostatSetpointMax' attribute
+	// TODO: handle 'coolingSetpoint' attribute
+	// TODO: handle 'coolingSetpointMin' attribute
+	// TODO: handle 'coolingSetpointMax' attribute
+	// TODO: handle 'thermostatFanMode' attribute
+	// TODO: handle 'heatingSetpoint' attribute
+	// TODO: handle 'heatingSetpointMin' attribute
+	// TODO: handle 'heatingSetpointMax' attribute
+	// TODO: handle 'thermostatMode' attribute
+	// TODO: handle 'thermostatOperatingState' attribute
+	// TODO: handle 'thermostatSetpoint' attribute
+	// TODO: handle 'thermostatSetpointMin' attribute
+	// TODO: handle 'thermostatSetpointMax' attribute
+	// TODO: handle 'threeAxis' attribute
+	// TODO: handle 'sessionStatus' attribute
+	// TODO: handle 'timeRemaining' attribute
+	// TODO: handle 'touch' attribute
+	// TODO: handle 'ultravioletIndex' attribute
+	// TODO: handle 'contact' attribute
+	// TODO: handle 'valve' attribute
+	// TODO: handle 'camera' attribute
+	// TODO: handle 'statusMessage' attribute
+	// TODO: handle 'mute' attribute
+	// TODO: handle 'settings' attribute
+	// TODO: handle 'clip' attribute
+	// TODO: handle 'stream' attribute
+	// TODO: handle 'voltage' attribute
+	// TODO: handle 'water' attribute
+	// TODO: handle 'windowShade' attribute
+	// TODO: handle 'epEvent' attribute
+	// TODO: handle 'epInfo' attribute
+
+}
+
+// handle commands
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def strobe() {
+	log.debug "Executing 'strobe'"
+	// TODO: handle 'strobe' command
+}
+
+def siren() {
+	log.debug "Executing 'siren'"
+	// TODO: handle 'siren' command
+}
+
+def both() {
+	log.debug "Executing 'both'"
+	// TODO: handle 'both' command
+}
+
+def sendEvent(alarmSystemStatus,off)() {
+	log.debug "Executing 'sendEvent(alarmSystemStatus,off)'"
+	// TODO: handle 'sendEvent(alarmSystemStatus,off)' command
+}
+
+def sendEvent(alarmSystemStatus,stay)() {
+	log.debug "Executing 'sendEvent(alarmSystemStatus,stay)'"
+	// TODO: handle 'sendEvent(alarmSystemStatus,stay)' command
+}
+
+def sendEvent(alarmSystemStatus,away)() {
+	log.debug "Executing 'sendEvent(alarmSystemStatus,away)'"
+	// TODO: handle 'sendEvent(alarmSystemStatus,away)' command
+}
+
+def sendEvent(alarmSystemStatus,stay)() {
+	log.debug "Executing 'sendEvent(alarmSystemStatus,stay)'"
+	// TODO: handle 'sendEvent(alarmSystemStatus,stay)' command
+}
+
+def sendEvent(alarmSystemStatus,away)() {
+	log.debug "Executing 'sendEvent(alarmSystemStatus,away)'"
+	// TODO: handle 'sendEvent(alarmSystemStatus,away)' command
+}
+
+def sendEvent(sunrise)() {
+	log.debug "Executing 'sendEvent(sunrise)'"
+	// TODO: handle 'sendEvent(sunrise)' command
+}
+
+def sendEvent(sunset)() {
+	log.debug "Executing 'sendEvent(sunset)'"
+	// TODO: handle 'sendEvent(sunset)' command
+}
+
+def sendEvent(sunriseTime)() {
+	log.debug "Executing 'sendEvent(sunriseTime)'"
+	// TODO: handle 'sendEvent(sunriseTime)' command
+}
+
+def sendEvent(sunsetTime)() {
+	log.debug "Executing 'sendEvent(sunsetTime)'"
+	// TODO: handle 'sendEvent(sunsetTime)' command
+}
+
+def playText() {
+	log.debug "Executing 'playText'"
+	// TODO: handle 'playText' command
+}
+
+def playTextAndResume() {
+	log.debug "Executing 'playTextAndResume'"
+	// TODO: handle 'playTextAndResume' command
+}
+
+def playTextAndRestore() {
+	log.debug "Executing 'playTextAndRestore'"
+	// TODO: handle 'playTextAndRestore' command
+}
+
+def playTrack() {
+	log.debug "Executing 'playTrack'"
+	// TODO: handle 'playTrack' command
+}
+
+def playTrackAndResume() {
+	log.debug "Executing 'playTrackAndResume'"
+	// TODO: handle 'playTrackAndResume' command
+}
+
+def playTrackAndRestore() {
+	log.debug "Executing 'playTrackAndRestore'"
+	// TODO: handle 'playTrackAndRestore' command
+}
+
+def capture() {
+	log.debug "Executing 'capture'"
+	// TODO: handle 'capture' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def setHue() {
+	log.debug "Executing 'setHue'"
+	// TODO: handle 'setHue' command
+}
+
+def setSaturation() {
+	log.debug "Executing 'setSaturation'"
+	// TODO: handle 'setSaturation' command
+}
+
+def setColor() {
+	log.debug "Executing 'setColor'"
+	// TODO: handle 'setColor' command
+}
+
+def setColorTemperature() {
+	log.debug "Executing 'setColorTemperature'"
+	// TODO: handle 'setColorTemperature' command
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+	// TODO: handle 'configure' command
+}
+
+def setConsumableStatus() {
+	log.debug "Executing 'setConsumableStatus'"
+	// TODO: handle 'setConsumableStatus' command
+}
+
+def open() {
+	log.debug "Executing 'open'"
+	// TODO: handle 'open' command
+}
+
+def close() {
+	log.debug "Executing 'close'"
+	// TODO: handle 'close' command
+}
+
+def open() {
+	log.debug "Executing 'open'"
+	// TODO: handle 'open' command
+}
+
+def close() {
+	log.debug "Executing 'close'"
+	// TODO: handle 'close' command
+}
+
+def ping() {
+	log.debug "Executing 'ping'"
+	// TODO: handle 'ping' command
+}
+
+def take() {
+	log.debug "Executing 'take'"
+	// TODO: handle 'take' command
+}
+
+def indicatorWhenOn() {
+	log.debug "Executing 'indicatorWhenOn'"
+	// TODO: handle 'indicatorWhenOn' command
+}
+
+def indicatorWhenOff() {
+	log.debug "Executing 'indicatorWhenOff'"
+	// TODO: handle 'indicatorWhenOff' command
+}
+
+def indicatorNever() {
+	log.debug "Executing 'indicatorNever'"
+	// TODO: handle 'indicatorNever' command
+}
+
+def setInfraredLevel() {
+	log.debug "Executing 'setInfraredLevel'"
+	// TODO: handle 'setInfraredLevel' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def lock() {
+	log.debug "Executing 'lock'"
+	// TODO: handle 'lock' command
+}
+
+def unlock() {
+	log.debug "Executing 'unlock'"
+	// TODO: handle 'unlock' command
+}
+
+def lock() {
+	log.debug "Executing 'lock'"
+	// TODO: handle 'lock' command
+}
+
+def unlock() {
+	log.debug "Executing 'unlock'"
+	// TODO: handle 'unlock' command
+}
+
+def updateCodes() {
+	log.debug "Executing 'updateCodes'"
+	// TODO: handle 'updateCodes' command
+}
+
+def setCode() {
+	log.debug "Executing 'setCode'"
+	// TODO: handle 'setCode' command
+}
+
+def deleteCode() {
+	log.debug "Executing 'deleteCode'"
+	// TODO: handle 'deleteCode' command
+}
+
+def requestCode() {
+	log.debug "Executing 'requestCode'"
+	// TODO: handle 'requestCode' command
+}
+
+def reloadAllCodes() {
+	log.debug "Executing 'reloadAllCodes'"
+	// TODO: handle 'reloadAllCodes' command
+}
+
+def lock() {
+	log.debug "Executing 'lock'"
+	// TODO: handle 'lock' command
+}
+
+def startActivity() {
+	log.debug "Executing 'startActivity'"
+	// TODO: handle 'startActivity' command
+}
+
+def getAllActivities() {
+	log.debug "Executing 'getAllActivities'"
+	// TODO: handle 'getAllActivities' command
+}
+
+def getCurrentActivity() {
+	log.debug "Executing 'getCurrentActivity'"
+	// TODO: handle 'getCurrentActivity' command
+}
+
+def push() {
+	log.debug "Executing 'push'"
+	// TODO: handle 'push' command
+}
+
+def play() {
+	log.debug "Executing 'play'"
+	// TODO: handle 'play' command
+}
+
+def pause() {
+	log.debug "Executing 'pause'"
+	// TODO: handle 'pause' command
+}
+
+def stop() {
+	log.debug "Executing 'stop'"
+	// TODO: handle 'stop' command
+}
+
+def nextTrack() {
+	log.debug "Executing 'nextTrack'"
+	// TODO: handle 'nextTrack' command
+}
+
+def playTrack() {
+	log.debug "Executing 'playTrack'"
+	// TODO: handle 'playTrack' command
+}
+
+def setLevel() {
+	log.debug "Executing 'setLevel'"
+	// TODO: handle 'setLevel' command
+}
+
+def mute() {
+	log.debug "Executing 'mute'"
+	// TODO: handle 'mute' command
+}
+
+def previousTrack() {
+	log.debug "Executing 'previousTrack'"
+	// TODO: handle 'previousTrack' command
+}
+
+def unmute() {
+	log.debug "Executing 'unmute'"
+	// TODO: handle 'unmute' command
+}
+
+def setTrack() {
+	log.debug "Executing 'setTrack'"
+	// TODO: handle 'setTrack' command
+}
+
+def resumeTrack() {
+	log.debug "Executing 'resumeTrack'"
+	// TODO: handle 'resumeTrack' command
+}
+
+def restoreTrack() {
+	log.debug "Executing 'restoreTrack'"
+	// TODO: handle 'restoreTrack' command
+}
+
+def postOcfCommand() {
+	log.debug "Executing 'postOcfCommand'"
+	// TODO: handle 'postOcfCommand' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def poll() {
+	log.debug "Executing 'poll'"
+	// TODO: handle 'poll' command
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+	// TODO: handle 'refresh' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def volumeUp() {
+	log.debug "Executing 'volumeUp'"
+	// TODO: handle 'volumeUp' command
+}
+
+def volumeDown() {
+	log.debug "Executing 'volumeDown'"
+	// TODO: handle 'volumeDown' command
+}
+
+def setVolume() {
+	log.debug "Executing 'setVolume'"
+	// TODO: handle 'setVolume' command
+}
+
+def mute() {
+	log.debug "Executing 'mute'"
+	// TODO: handle 'mute' command
+}
+
+def unmute() {
+	log.debug "Executing 'unmute'"
+	// TODO: handle 'unmute' command
+}
+
+def setPictureMode() {
+	log.debug "Executing 'setPictureMode'"
+	// TODO: handle 'setPictureMode' command
+}
+
+def setSoundMode() {
+	log.debug "Executing 'setSoundMode'"
+	// TODO: handle 'setSoundMode' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def showMessage() {
+	log.debug "Executing 'showMessage'"
+	// TODO: handle 'showMessage' command
+}
+
+def speak() {
+	log.debug "Executing 'speak'"
+	// TODO: handle 'speak' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def setLevel() {
+	log.debug "Executing 'setLevel'"
+	// TODO: handle 'setLevel' command
+}
+
+def setHeatingSetpoint() {
+	log.debug "Executing 'setHeatingSetpoint'"
+	// TODO: handle 'setHeatingSetpoint' command
+}
+
+def setCoolingSetpoint() {
+	log.debug "Executing 'setCoolingSetpoint'"
+	// TODO: handle 'setCoolingSetpoint' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def heat() {
+	log.debug "Executing 'heat'"
+	// TODO: handle 'heat' command
+}
+
+def emergencyHeat() {
+	log.debug "Executing 'emergencyHeat'"
+	// TODO: handle 'emergencyHeat' command
+}
+
+def cool() {
+	log.debug "Executing 'cool'"
+	// TODO: handle 'cool' command
+}
+
+def setThermostatMode() {
+	log.debug "Executing 'setThermostatMode'"
+	// TODO: handle 'setThermostatMode' command
+}
+
+def fanOn() {
+	log.debug "Executing 'fanOn'"
+	// TODO: handle 'fanOn' command
+}
+
+def fanAuto() {
+	log.debug "Executing 'fanAuto'"
+	// TODO: handle 'fanAuto' command
+}
+
+def fanCirculate() {
+	log.debug "Executing 'fanCirculate'"
+	// TODO: handle 'fanCirculate' command
+}
+
+def setThermostatFanMode() {
+	log.debug "Executing 'setThermostatFanMode'"
+	// TODO: handle 'setThermostatFanMode' command
+}
+
+def auto() {
+	log.debug "Executing 'auto'"
+	// TODO: handle 'auto' command
+}
+
+def setSchedule() {
+	log.debug "Executing 'setSchedule'"
+	// TODO: handle 'setSchedule' command
+}
+
+def setCoolingSetpoint() {
+	log.debug "Executing 'setCoolingSetpoint'"
+	// TODO: handle 'setCoolingSetpoint' command
+}
+
+def fanOn() {
+	log.debug "Executing 'fanOn'"
+	// TODO: handle 'fanOn' command
+}
+
+def fanAuto() {
+	log.debug "Executing 'fanAuto'"
+	// TODO: handle 'fanAuto' command
+}
+
+def fanCirculate() {
+	log.debug "Executing 'fanCirculate'"
+	// TODO: handle 'fanCirculate' command
+}
+
+def setThermostatFanMode() {
+	log.debug "Executing 'setThermostatFanMode'"
+	// TODO: handle 'setThermostatFanMode' command
+}
+
+def setHeatingSetpoint() {
+	log.debug "Executing 'setHeatingSetpoint'"
+	// TODO: handle 'setHeatingSetpoint' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def heat() {
+	log.debug "Executing 'heat'"
+	// TODO: handle 'heat' command
+}
+
+def emergencyHeat() {
+	log.debug "Executing 'emergencyHeat'"
+	// TODO: handle 'emergencyHeat' command
+}
+
+def cool() {
+	log.debug "Executing 'cool'"
+	// TODO: handle 'cool' command
+}
+
+def auto() {
+	log.debug "Executing 'auto'"
+	// TODO: handle 'auto' command
+}
+
+def setThermostatMode() {
+	log.debug "Executing 'setThermostatMode'"
+	// TODO: handle 'setThermostatMode' command
+}
+
+def setTimeRemaining() {
+	log.debug "Executing 'setTimeRemaining'"
+	// TODO: handle 'setTimeRemaining' command
+}
+
+def start() {
+	log.debug "Executing 'start'"
+	// TODO: handle 'start' command
+}
+
+def stop() {
+	log.debug "Executing 'stop'"
+	// TODO: handle 'stop' command
+}
+
+def pause() {
+	log.debug "Executing 'pause'"
+	// TODO: handle 'pause' command
+}
+
+def cancel() {
+	log.debug "Executing 'cancel'"
+	// TODO: handle 'cancel' command
+}
+
+def beep() {
+	log.debug "Executing 'beep'"
+	// TODO: handle 'beep' command
+}
+
+def open() {
+	log.debug "Executing 'open'"
+	// TODO: handle 'open' command
+}
+
+def close() {
+	log.debug "Executing 'close'"
+	// TODO: handle 'close' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def mute() {
+	log.debug "Executing 'mute'"
+	// TODO: handle 'mute' command
+}
+
+def unmute() {
+	log.debug "Executing 'unmute'"
+	// TODO: handle 'unmute' command
+}
+
+def flip() {
+	log.debug "Executing 'flip'"
+	// TODO: handle 'flip' command
+}
+
+def capture() {
+	log.debug "Executing 'capture'"
+	// TODO: handle 'capture' command
+}
+
+def open() {
+	log.debug "Executing 'open'"
+	// TODO: handle 'open' command
+}
+
+def close() {
+	log.debug "Executing 'close'"
+	// TODO: handle 'close' command
+}
+
+def presetPosition() {
+	log.debug "Executing 'presetPosition'"
+	// TODO: handle 'presetPosition' command
+}
+
+def enableEpEvents() {
+	log.debug "Executing 'enableEpEvents'"
+	// TODO: handle 'enableEpEvents' command
+}
+
+def epCmd() {
+	log.debug "Executing 'epCmd'"
+	// TODO: handle 'epCmd' command
+}

devicetypes/osotech/plantlink.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/osotech/plantlink.src/README.md

@@ -0,0 +1,33 @@
+# Osotech Plant Link
+
+Cloud Execution
+
+Works with: 
+
+* [OSO Technologies PlantLink Soil Moisture Sensor](https://www.smartthings.com/works-with-smartthings/oso-technologies/oso-technologies-plantlink-soil-moisture-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Sensor** - detects sensor events
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Plant Link sensor is a ZigBee sleepy device and checks in every 15 minutes.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [OSO Technologies PlantLink Soil Moisture Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206868986-PlantLink-Soil-Moisture-Sensor)

devicetypes/osotech/plantlink.src/plantlink.groovy

@@ -24,6 +24,7 @@ import groovy.json.JsonBuilder
 metadata {
     definition (name: "PlantLink", namespace: "OsoTech", author: "Oso Technologies") {
         capability "Sensor"
+        capability "Health Check"
 
         command "setStatusIcon"
         command "setPlantFuelLevel"
@@ -70,6 +71,16 @@ metadata {
     }
 }
 
+def updated() {
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
+
+def installed() {
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
+
 def setStatusIcon(value){
     def status = ''
     switch (value) {
@@ -161,4 +172,4 @@ def parseDescriptionAsMap(description) {
         	map += []
         }
     }
-}
+}

devicetypes/smartthings/plant-link.src/README.md

@@ -21,7 +21,7 @@ Works with:
 
 ## Device Health
 
-Plant Link sensor is a Z-wave sleepy device and checks in every 15 minutes.
+Plant Link sensor is a ZigBee sleepy device and checks in every 15 minutes.
 Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
 
 * __32min__ checkInterval

devicetypes/smartthings/smartalert-siren.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartalert-siren.src/README.md

@@ -0,0 +1,39 @@
+# Smartalert Siren
+
+Cloud Execution
+
+Works with:
+
+* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/works-with-smartthings/other/fortrezz-water-valve)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Switch** - can detect state (possible values: on/off)
+* **Sensor** - detects sensor events
+* **Alarm** - allows for interacting with devices that serve as alarms
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+FortrezZ Siren Strobe Alarm is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [FortrezZ Siren Strobe Alarm Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294760-FortrezZ-Siren-Strobe-Alarm)

devicetypes/smartthings/smartalert-siren.src/smartalert-siren.groovy

@@ -21,10 +21,12 @@ metadata {
 		capability "Switch"
 		capability "Sensor"
 		capability "Alarm"
+		capability "Health Check"
 
 		command "test"
 
 		fingerprint deviceId: "0x1100", inClusters: "0x26,0x71"
+		fingerprint mfr:"0084", prod:"0313", model:"010B", deviceJoinName: "FortrezZ Siren Strobe Alarm"
 	}
 
 	simulator {
@@ -68,6 +70,16 @@ metadata {
 	}
 }
 
+def installed() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def on() {
 	[
 		zwave.basicV1.basicSet(value: 0xFF).format(),
@@ -149,3 +161,10 @@ def createEvents(physicalgraph.zwave.commands.basicv1.BasicReport cmd)
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	log.warn "UNEXPECTED COMMAND: $cmd"
 }
+
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	secure(zwave.basicV1.basicGet())
+}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -191,6 +191,10 @@ private List<Map> parseAxis(List<Map> attrData) {
 	def y = hexToSignedInt(attrData.find { it.attrInt == 0x0013 }?.value)
 	def z = hexToSignedInt(attrData.find { it.attrInt == 0x0014 }?.value)
 
+	if ([x, y ,z].any { it == null }) {
+		return []
+	}
+
 	def xyzResults = [:]
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		// This mapping matches the current behavior of the Device Handler for the Centralite sensors
@@ -371,6 +375,10 @@ def updated() {
 }
 
 private hexToSignedInt(hexVal) {
+	if (!hexVal) {
+		return null
+	}
+
 	def unsignedVal = hexToInt(hexVal)
 	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
 }

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -70,19 +70,27 @@ def parse(String description) {
         else {
             sendEvent(event)
         }
-    }
-    else {
-        def cluster = zigbee.parse(description)
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00){
+    } else {
+        def descMap = zigbee.parseDescriptionAsMap(description)
+        if (descMap && descMap.clusterInt == 0x0006 && descMap.commandInt == 0x07) {
+            if (descMap.data[0] == "00") {
                 log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
                 sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
+            } else {
                 log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
             }
-        }
-        else {
+        } else if (device.getDataValue("manufacturer") == "sengled" && descMap && descMap.clusterInt == 0x0008 && descMap.attrInt == 0x0000) {
+            // This is being done because the sengled element touch incorrectly uses the value 0xFF for the max level.
+            // Per the ZCL spec for the UINT8 data type 0xFF is an invalid value, and 0xFE should be the max.  Here we
+            // manually handle the invalid attribute value since it will be ignored by getEvent as an invalid value.
+            // We also set the level of the bulb to 0xFE so future level reports will be 0xFE until it is changed by
+            // something else.
+            if (descMap.value.toUpperCase() == "FF") {
+                descMap.value = "FE"
+            }
+            sendHubCommand(zigbee.command(zigbee.LEVEL_CONTROL_CLUSTER, 0x00, "FE0000").collect { new physicalgraph.device.HubAction(it) }, 0)
+            sendEvent(zigbee.getEventFromAttrData(descMap.clusterInt, descMap.attrInt, descMap.encoding, descMap.value))
+        } else {
             log.warn "DID NOT PARSE MESSAGE for description : $description"
             log.debug zigbee.parseDescriptionAsMap(description)
         }

devicetypes/smartthings/zwave-lock.src/README.md

@@ -1,4 +1,4 @@
-# Z-Wave Switch
+# Z-Wave Lock
 
 Cloud Execution
 
@@ -6,7 +6,6 @@ Works with:
 
 * [Yale Key Free Touchscreen Deadbolt (YRD240)](https://www.smartthings.com/works-with-smartthings/yale/yale-key-free-touchscreen-deadbolt-yrd240)
 
-
 ## Table of contents
 
 * [Capabilities](#capabilities)
@@ -41,5 +40,3 @@ If the device doesn't pair when trying from the SmartThings mobile app, it is po
 Pairing needs to be tried again by placing the device closer to the hub.
 Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
 * [General Z-Wave/ZigBee Yale Lock Troubleshooting](https://support.smartthings.com/hc/en-us/articles/205138400-How-to-connect-Yale-locks)
-
-