MSA-1936: Smart bed

devicetypes/happy-new/kad.src/kad.groovy

@@ -0,0 +1,900 @@
+/**
+ *  kad
+ *
+ *  Copyright 2017 Kadeem Coleman
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "kad", namespace: "happy new ", author: "Kadeem Coleman") {
+		capability "Acceleration Sensor"
+		capability "Actuator"
+		capability "Alarm"
+		capability "Alarm System"
+		capability "Alarm System Arm Only"
+		capability "Astronomical Data"
+		capability "Audio Notification"
+		capability "Battery"
+		capability "Beacon"
+		capability "Bridge"
+		capability "Buffered Video Capture"
+		capability "Bulb"
+		capability "Button"
+		capability "Carbon Dioxide Measurement"
+		capability "Carbon Monoxide Detector"
+		capability "Color Control"
+		capability "Color Temperature"
+		capability "Configuration"
+		capability "Consumable"
+		capability "Contact Sensor"
+		capability "Door Control"
+		capability "Energy Meter"
+		capability "Estimated Time Of Arrival"
+		capability "Garage Door Control"
+		capability "Health Check"
+		capability "Image Capture"
+		capability "Indicator"
+		capability "Infrared Level"
+		capability "Light"
+		capability "Light"
+		capability "Lock"
+		capability "Lock Codes"
+		capability "Lock Only"
+		capability "Media Controller"
+		capability "Momentary"
+		capability "Motion Sensor"
+		capability "Music Player"
+		capability "Ocf"
+		capability "Outlet"
+		capability "pH Measurement"
+		capability "Polling"
+		capability "Power"
+		capability "Power Meter"
+		capability "Power Source"
+		capability "Presence Sensor"
+		capability "Refresh"
+		capability "Relay Switch"
+		capability "Samsung TV"
+		capability "Sensor"
+		capability "Shock Sensor"
+		capability "Signal Strength"
+		capability "Sleep Sensor"
+		capability "Smoke Detector"
+		capability "Sound Sensor"
+		capability "Speech Recognition"
+		capability "Speech Synthesis"
+		capability "Switch"
+		capability "Switch Level"
+		capability "Tamper Alert"
+		capability "Temperature Measurement"
+		capability "Test Capability"
+		capability "Thermostat"
+		capability "Thermostat Cooling Setpoint"
+		capability "Thermostat Fan Mode"
+		capability "Thermostat Heating Setpoint"
+		capability "Thermostat Mode"
+		capability "Thermostat Operating State"
+		capability "Thermostat Setpoint"
+		capability "Three Axis"
+		capability "Timed Session"
+		capability "Tone"
+		capability "Touch Sensor"
+		capability "Ultraviolet Index"
+		capability "Valve"
+		capability "Video Camera"
+		capability "Video Capture"
+		capability "Voltage Measurement"
+		capability "Water Sensor"
+		capability "Window Shade"
+		capability "Zw Multichannel"
+	}
+
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		// TODO: define your main and details tiles here
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+	// TODO: handle 'acceleration' attribute
+	// TODO: handle 'alarm' attribute
+	// TODO: handle 'alarmSystemStatus' attribute
+	// TODO: handle 'alarmSystemStatus' attribute
+	// TODO: handle 'sunrise' attribute
+	// TODO: handle 'sunset' attribute
+	// TODO: handle 'sunriseTime' attribute
+	// TODO: handle 'sunsetTime' attribute
+	// TODO: handle 'battery' attribute
+	// TODO: handle 'presence' attribute
+	// TODO: handle 'clip' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'button' attribute
+	// TODO: handle 'numberOfButtons' attribute
+	// TODO: handle 'carbonDioxide' attribute
+	// TODO: handle 'carbonMonoxide' attribute
+	// TODO: handle 'hue' attribute
+	// TODO: handle 'saturation' attribute
+	// TODO: handle 'color' attribute
+	// TODO: handle 'colorTemperature' attribute
+	// TODO: handle 'consumableStatus' attribute
+	// TODO: handle 'contact' attribute
+	// TODO: handle 'door' attribute
+	// TODO: handle 'energy' attribute
+	// TODO: handle 'eta' attribute
+	// TODO: handle 'door' attribute
+	// TODO: handle 'checkInterval' attribute
+	// TODO: handle 'image' attribute
+	// TODO: handle 'indicatorStatus' attribute
+	// TODO: handle 'infraredLevel' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'lock' attribute
+	// TODO: handle 'lock' attribute
+	// TODO: handle 'codeReport' attribute
+	// TODO: handle 'codeChanged' attribute
+	// TODO: handle 'lock' attribute
+	// TODO: handle 'activities' attribute
+	// TODO: handle 'currentActivity' attribute
+	// TODO: handle 'motion' attribute
+	// TODO: handle 'status' attribute
+	// TODO: handle 'level' attribute
+	// TODO: handle 'trackDescription' attribute
+	// TODO: handle 'trackData' attribute
+	// TODO: handle 'mute' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'pH' attribute
+	// TODO: handle 'powerSource' attribute
+	// TODO: handle 'power' attribute
+	// TODO: handle 'powerSource' attribute
+	// TODO: handle 'presence' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'volume' attribute
+	// TODO: handle 'mute' attribute
+	// TODO: handle 'pictureMode' attribute
+	// TODO: handle 'soundMode' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'messageButton' attribute
+	// TODO: handle 'shock' attribute
+	// TODO: handle 'lqi' attribute
+	// TODO: handle 'rssi' attribute
+	// TODO: handle 'sleeping' attribute
+	// TODO: handle 'smoke' attribute
+	// TODO: handle 'carbonMonoxide' attribute
+	// TODO: handle 'sound' attribute
+	// TODO: handle 'phraseSpoken' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'level' attribute
+	// TODO: handle 'tamper' attribute
+	// TODO: handle 'temperature' attribute
+	// TODO: handle 'temperature' attribute
+	// TODO: handle 'heatingSetpoint' attribute
+	// TODO: handle 'coolingSetpoint' attribute
+	// TODO: handle 'thermostatSetpoint' attribute
+	// TODO: handle 'thermostatMode' attribute
+	// TODO: handle 'thermostatFanMode' attribute
+	// TODO: handle 'thermostatOperatingState' attribute
+	// TODO: handle 'schedule' attribute
+	// TODO: handle 'coolingSetpointMin' attribute
+	// TODO: handle 'coolingSetpointMax' attribute
+	// TODO: handle 'heatingSetpointMin' attribute
+	// TODO: handle 'heatingSetpointMax' attribute
+	// TODO: handle 'thermostatSetpointMin' attribute
+	// TODO: handle 'thermostatSetpointMax' attribute
+	// TODO: handle 'coolingSetpointMin' attribute
+	// TODO: handle 'coolingSetpointMax' attribute
+	// TODO: handle 'heatingSetpointMin' attribute
+	// TODO: handle 'heatingSetpointMax' attribute
+	// TODO: handle 'thermostatSetpointMin' attribute
+	// TODO: handle 'thermostatSetpointMax' attribute
+	// TODO: handle 'coolingSetpoint' attribute
+	// TODO: handle 'coolingSetpointMin' attribute
+	// TODO: handle 'coolingSetpointMax' attribute
+	// TODO: handle 'thermostatFanMode' attribute
+	// TODO: handle 'heatingSetpoint' attribute
+	// TODO: handle 'heatingSetpointMin' attribute
+	// TODO: handle 'heatingSetpointMax' attribute
+	// TODO: handle 'thermostatMode' attribute
+	// TODO: handle 'thermostatOperatingState' attribute
+	// TODO: handle 'thermostatSetpoint' attribute
+	// TODO: handle 'thermostatSetpointMin' attribute
+	// TODO: handle 'thermostatSetpointMax' attribute
+	// TODO: handle 'threeAxis' attribute
+	// TODO: handle 'sessionStatus' attribute
+	// TODO: handle 'timeRemaining' attribute
+	// TODO: handle 'touch' attribute
+	// TODO: handle 'ultravioletIndex' attribute
+	// TODO: handle 'contact' attribute
+	// TODO: handle 'valve' attribute
+	// TODO: handle 'camera' attribute
+	// TODO: handle 'statusMessage' attribute
+	// TODO: handle 'mute' attribute
+	// TODO: handle 'settings' attribute
+	// TODO: handle 'clip' attribute
+	// TODO: handle 'stream' attribute
+	// TODO: handle 'voltage' attribute
+	// TODO: handle 'water' attribute
+	// TODO: handle 'windowShade' attribute
+	// TODO: handle 'epEvent' attribute
+	// TODO: handle 'epInfo' attribute
+
+}
+
+// handle commands
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def strobe() {
+	log.debug "Executing 'strobe'"
+	// TODO: handle 'strobe' command
+}
+
+def siren() {
+	log.debug "Executing 'siren'"
+	// TODO: handle 'siren' command
+}
+
+def both() {
+	log.debug "Executing 'both'"
+	// TODO: handle 'both' command
+}
+
+def sendEvent(alarmSystemStatus,off)() {
+	log.debug "Executing 'sendEvent(alarmSystemStatus,off)'"
+	// TODO: handle 'sendEvent(alarmSystemStatus,off)' command
+}
+
+def sendEvent(alarmSystemStatus,stay)() {
+	log.debug "Executing 'sendEvent(alarmSystemStatus,stay)'"
+	// TODO: handle 'sendEvent(alarmSystemStatus,stay)' command
+}
+
+def sendEvent(alarmSystemStatus,away)() {
+	log.debug "Executing 'sendEvent(alarmSystemStatus,away)'"
+	// TODO: handle 'sendEvent(alarmSystemStatus,away)' command
+}
+
+def sendEvent(alarmSystemStatus,stay)() {
+	log.debug "Executing 'sendEvent(alarmSystemStatus,stay)'"
+	// TODO: handle 'sendEvent(alarmSystemStatus,stay)' command
+}
+
+def sendEvent(alarmSystemStatus,away)() {
+	log.debug "Executing 'sendEvent(alarmSystemStatus,away)'"
+	// TODO: handle 'sendEvent(alarmSystemStatus,away)' command
+}
+
+def sendEvent(sunrise)() {
+	log.debug "Executing 'sendEvent(sunrise)'"
+	// TODO: handle 'sendEvent(sunrise)' command
+}
+
+def sendEvent(sunset)() {
+	log.debug "Executing 'sendEvent(sunset)'"
+	// TODO: handle 'sendEvent(sunset)' command
+}
+
+def sendEvent(sunriseTime)() {
+	log.debug "Executing 'sendEvent(sunriseTime)'"
+	// TODO: handle 'sendEvent(sunriseTime)' command
+}
+
+def sendEvent(sunsetTime)() {
+	log.debug "Executing 'sendEvent(sunsetTime)'"
+	// TODO: handle 'sendEvent(sunsetTime)' command
+}
+
+def playText() {
+	log.debug "Executing 'playText'"
+	// TODO: handle 'playText' command
+}
+
+def playTextAndResume() {
+	log.debug "Executing 'playTextAndResume'"
+	// TODO: handle 'playTextAndResume' command
+}
+
+def playTextAndRestore() {
+	log.debug "Executing 'playTextAndRestore'"
+	// TODO: handle 'playTextAndRestore' command
+}
+
+def playTrack() {
+	log.debug "Executing 'playTrack'"
+	// TODO: handle 'playTrack' command
+}
+
+def playTrackAndResume() {
+	log.debug "Executing 'playTrackAndResume'"
+	// TODO: handle 'playTrackAndResume' command
+}
+
+def playTrackAndRestore() {
+	log.debug "Executing 'playTrackAndRestore'"
+	// TODO: handle 'playTrackAndRestore' command
+}
+
+def capture() {
+	log.debug "Executing 'capture'"
+	// TODO: handle 'capture' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def setHue() {
+	log.debug "Executing 'setHue'"
+	// TODO: handle 'setHue' command
+}
+
+def setSaturation() {
+	log.debug "Executing 'setSaturation'"
+	// TODO: handle 'setSaturation' command
+}
+
+def setColor() {
+	log.debug "Executing 'setColor'"
+	// TODO: handle 'setColor' command
+}
+
+def setColorTemperature() {
+	log.debug "Executing 'setColorTemperature'"
+	// TODO: handle 'setColorTemperature' command
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+	// TODO: handle 'configure' command
+}
+
+def setConsumableStatus() {
+	log.debug "Executing 'setConsumableStatus'"
+	// TODO: handle 'setConsumableStatus' command
+}
+
+def open() {
+	log.debug "Executing 'open'"
+	// TODO: handle 'open' command
+}
+
+def close() {
+	log.debug "Executing 'close'"
+	// TODO: handle 'close' command
+}
+
+def open() {
+	log.debug "Executing 'open'"
+	// TODO: handle 'open' command
+}
+
+def close() {
+	log.debug "Executing 'close'"
+	// TODO: handle 'close' command
+}
+
+def ping() {
+	log.debug "Executing 'ping'"
+	// TODO: handle 'ping' command
+}
+
+def take() {
+	log.debug "Executing 'take'"
+	// TODO: handle 'take' command
+}
+
+def indicatorWhenOn() {
+	log.debug "Executing 'indicatorWhenOn'"
+	// TODO: handle 'indicatorWhenOn' command
+}
+
+def indicatorWhenOff() {
+	log.debug "Executing 'indicatorWhenOff'"
+	// TODO: handle 'indicatorWhenOff' command
+}
+
+def indicatorNever() {
+	log.debug "Executing 'indicatorNever'"
+	// TODO: handle 'indicatorNever' command
+}
+
+def setInfraredLevel() {
+	log.debug "Executing 'setInfraredLevel'"
+	// TODO: handle 'setInfraredLevel' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def lock() {
+	log.debug "Executing 'lock'"
+	// TODO: handle 'lock' command
+}
+
+def unlock() {
+	log.debug "Executing 'unlock'"
+	// TODO: handle 'unlock' command
+}
+
+def lock() {
+	log.debug "Executing 'lock'"
+	// TODO: handle 'lock' command
+}
+
+def unlock() {
+	log.debug "Executing 'unlock'"
+	// TODO: handle 'unlock' command
+}
+
+def updateCodes() {
+	log.debug "Executing 'updateCodes'"
+	// TODO: handle 'updateCodes' command
+}
+
+def setCode() {
+	log.debug "Executing 'setCode'"
+	// TODO: handle 'setCode' command
+}
+
+def deleteCode() {
+	log.debug "Executing 'deleteCode'"
+	// TODO: handle 'deleteCode' command
+}
+
+def requestCode() {
+	log.debug "Executing 'requestCode'"
+	// TODO: handle 'requestCode' command
+}
+
+def reloadAllCodes() {
+	log.debug "Executing 'reloadAllCodes'"
+	// TODO: handle 'reloadAllCodes' command
+}
+
+def lock() {
+	log.debug "Executing 'lock'"
+	// TODO: handle 'lock' command
+}
+
+def startActivity() {
+	log.debug "Executing 'startActivity'"
+	// TODO: handle 'startActivity' command
+}
+
+def getAllActivities() {
+	log.debug "Executing 'getAllActivities'"
+	// TODO: handle 'getAllActivities' command
+}
+
+def getCurrentActivity() {
+	log.debug "Executing 'getCurrentActivity'"
+	// TODO: handle 'getCurrentActivity' command
+}
+
+def push() {
+	log.debug "Executing 'push'"
+	// TODO: handle 'push' command
+}
+
+def play() {
+	log.debug "Executing 'play'"
+	// TODO: handle 'play' command
+}
+
+def pause() {
+	log.debug "Executing 'pause'"
+	// TODO: handle 'pause' command
+}
+
+def stop() {
+	log.debug "Executing 'stop'"
+	// TODO: handle 'stop' command
+}
+
+def nextTrack() {
+	log.debug "Executing 'nextTrack'"
+	// TODO: handle 'nextTrack' command
+}
+
+def playTrack() {
+	log.debug "Executing 'playTrack'"
+	// TODO: handle 'playTrack' command
+}
+
+def setLevel() {
+	log.debug "Executing 'setLevel'"
+	// TODO: handle 'setLevel' command
+}
+
+def mute() {
+	log.debug "Executing 'mute'"
+	// TODO: handle 'mute' command
+}
+
+def previousTrack() {
+	log.debug "Executing 'previousTrack'"
+	// TODO: handle 'previousTrack' command
+}
+
+def unmute() {
+	log.debug "Executing 'unmute'"
+	// TODO: handle 'unmute' command
+}
+
+def setTrack() {
+	log.debug "Executing 'setTrack'"
+	// TODO: handle 'setTrack' command
+}
+
+def resumeTrack() {
+	log.debug "Executing 'resumeTrack'"
+	// TODO: handle 'resumeTrack' command
+}
+
+def restoreTrack() {
+	log.debug "Executing 'restoreTrack'"
+	// TODO: handle 'restoreTrack' command
+}
+
+def postOcfCommand() {
+	log.debug "Executing 'postOcfCommand'"
+	// TODO: handle 'postOcfCommand' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def poll() {
+	log.debug "Executing 'poll'"
+	// TODO: handle 'poll' command
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+	// TODO: handle 'refresh' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def volumeUp() {
+	log.debug "Executing 'volumeUp'"
+	// TODO: handle 'volumeUp' command
+}
+
+def volumeDown() {
+	log.debug "Executing 'volumeDown'"
+	// TODO: handle 'volumeDown' command
+}
+
+def setVolume() {
+	log.debug "Executing 'setVolume'"
+	// TODO: handle 'setVolume' command
+}
+
+def mute() {
+	log.debug "Executing 'mute'"
+	// TODO: handle 'mute' command
+}
+
+def unmute() {
+	log.debug "Executing 'unmute'"
+	// TODO: handle 'unmute' command
+}
+
+def setPictureMode() {
+	log.debug "Executing 'setPictureMode'"
+	// TODO: handle 'setPictureMode' command
+}
+
+def setSoundMode() {
+	log.debug "Executing 'setSoundMode'"
+	// TODO: handle 'setSoundMode' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def showMessage() {
+	log.debug "Executing 'showMessage'"
+	// TODO: handle 'showMessage' command
+}
+
+def speak() {
+	log.debug "Executing 'speak'"
+	// TODO: handle 'speak' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def setLevel() {
+	log.debug "Executing 'setLevel'"
+	// TODO: handle 'setLevel' command
+}
+
+def setHeatingSetpoint() {
+	log.debug "Executing 'setHeatingSetpoint'"
+	// TODO: handle 'setHeatingSetpoint' command
+}
+
+def setCoolingSetpoint() {
+	log.debug "Executing 'setCoolingSetpoint'"
+	// TODO: handle 'setCoolingSetpoint' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def heat() {
+	log.debug "Executing 'heat'"
+	// TODO: handle 'heat' command
+}
+
+def emergencyHeat() {
+	log.debug "Executing 'emergencyHeat'"
+	// TODO: handle 'emergencyHeat' command
+}
+
+def cool() {
+	log.debug "Executing 'cool'"
+	// TODO: handle 'cool' command
+}
+
+def setThermostatMode() {
+	log.debug "Executing 'setThermostatMode'"
+	// TODO: handle 'setThermostatMode' command
+}
+
+def fanOn() {
+	log.debug "Executing 'fanOn'"
+	// TODO: handle 'fanOn' command
+}
+
+def fanAuto() {
+	log.debug "Executing 'fanAuto'"
+	// TODO: handle 'fanAuto' command
+}
+
+def fanCirculate() {
+	log.debug "Executing 'fanCirculate'"
+	// TODO: handle 'fanCirculate' command
+}
+
+def setThermostatFanMode() {
+	log.debug "Executing 'setThermostatFanMode'"
+	// TODO: handle 'setThermostatFanMode' command
+}
+
+def auto() {
+	log.debug "Executing 'auto'"
+	// TODO: handle 'auto' command
+}
+
+def setSchedule() {
+	log.debug "Executing 'setSchedule'"
+	// TODO: handle 'setSchedule' command
+}
+
+def setCoolingSetpoint() {
+	log.debug "Executing 'setCoolingSetpoint'"
+	// TODO: handle 'setCoolingSetpoint' command
+}
+
+def fanOn() {
+	log.debug "Executing 'fanOn'"
+	// TODO: handle 'fanOn' command
+}
+
+def fanAuto() {
+	log.debug "Executing 'fanAuto'"
+	// TODO: handle 'fanAuto' command
+}
+
+def fanCirculate() {
+	log.debug "Executing 'fanCirculate'"
+	// TODO: handle 'fanCirculate' command
+}
+
+def setThermostatFanMode() {
+	log.debug "Executing 'setThermostatFanMode'"
+	// TODO: handle 'setThermostatFanMode' command
+}
+
+def setHeatingSetpoint() {
+	log.debug "Executing 'setHeatingSetpoint'"
+	// TODO: handle 'setHeatingSetpoint' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def heat() {
+	log.debug "Executing 'heat'"
+	// TODO: handle 'heat' command
+}
+
+def emergencyHeat() {
+	log.debug "Executing 'emergencyHeat'"
+	// TODO: handle 'emergencyHeat' command
+}
+
+def cool() {
+	log.debug "Executing 'cool'"
+	// TODO: handle 'cool' command
+}
+
+def auto() {
+	log.debug "Executing 'auto'"
+	// TODO: handle 'auto' command
+}
+
+def setThermostatMode() {
+	log.debug "Executing 'setThermostatMode'"
+	// TODO: handle 'setThermostatMode' command
+}
+
+def setTimeRemaining() {
+	log.debug "Executing 'setTimeRemaining'"
+	// TODO: handle 'setTimeRemaining' command
+}
+
+def start() {
+	log.debug "Executing 'start'"
+	// TODO: handle 'start' command
+}
+
+def stop() {
+	log.debug "Executing 'stop'"
+	// TODO: handle 'stop' command
+}
+
+def pause() {
+	log.debug "Executing 'pause'"
+	// TODO: handle 'pause' command
+}
+
+def cancel() {
+	log.debug "Executing 'cancel'"
+	// TODO: handle 'cancel' command
+}
+
+def beep() {
+	log.debug "Executing 'beep'"
+	// TODO: handle 'beep' command
+}
+
+def open() {
+	log.debug "Executing 'open'"
+	// TODO: handle 'open' command
+}
+
+def close() {
+	log.debug "Executing 'close'"
+	// TODO: handle 'close' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def mute() {
+	log.debug "Executing 'mute'"
+	// TODO: handle 'mute' command
+}
+
+def unmute() {
+	log.debug "Executing 'unmute'"
+	// TODO: handle 'unmute' command
+}
+
+def flip() {
+	log.debug "Executing 'flip'"
+	// TODO: handle 'flip' command
+}
+
+def capture() {
+	log.debug "Executing 'capture'"
+	// TODO: handle 'capture' command
+}
+
+def open() {
+	log.debug "Executing 'open'"
+	// TODO: handle 'open' command
+}
+
+def close() {
+	log.debug "Executing 'close'"
+	// TODO: handle 'close' command
+}
+
+def presetPosition() {
+	log.debug "Executing 'presetPosition'"
+	// TODO: handle 'presetPosition' command
+}
+
+def enableEpEvents() {
+	log.debug "Executing 'enableEpEvents'"
+	// TODO: handle 'enableEpEvents' command
+}
+
+def epCmd() {
+	log.debug "Executing 'epCmd'"
+	// TODO: handle 'epCmd' command
+}

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -103,7 +103,7 @@ metadata {
 		}
 
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "illuminance", label:'${currentValue} lux', unit:""
+			state "illuminance", label:'${currentValue} ${unit}', unit:"lux"
 		}
 
 		valueTile("ultravioletIndex", "device.ultravioletIndex", inactiveLabel: false, width: 2, height: 2) {
@@ -410,4 +410,4 @@ private command(physicalgraph.zwave.Command cmd) {
 private commands(commands, delay=200) {
 	log.info "sending commands: ${commands}"
 	delayBetween(commands.collect{ command(it) }, delay)
-}
+}

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -86,7 +86,7 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} lux', unit:""
+			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -282,4 +282,5 @@ private secure(physicalgraph.zwave.Command cmd) {
 
 private secureSequence(commands, delay=200) {
 	delayBetween(commands.collect{ secure(it) }, delay)
-}
+}
+

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -79,7 +79,7 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} lux', unit:""
+			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -193,4 +193,4 @@ def configure() {
 		// set data reporting period to 5 minutes
 		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 300).format()
 	])
-}
+}

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -25,7 +25,6 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart A19 Soft White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM 10 Year", deviceJoinName: "SYLVANIA Smart 10-Year A19"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2017 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -64,7 +64,6 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
-private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 
 // Parse incoming device messages to generate events
@@ -85,11 +84,11 @@ def parse(String description) {
 
 		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
 			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
 				sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
 			}
 			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
 				sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
 			}
 		}
@@ -124,12 +123,7 @@ def ping() {
 }
 
 def refresh() {
-	zigbee.onOffRefresh() +
-	zigbee.levelRefresh() +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
-	zigbee.onOffConfig(0, 300) +
-	zigbee.levelConfig()
+	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
 }
 
 def configure() {
@@ -139,38 +133,26 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	refresh()
+	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setLevel(value) {
 	zigbee.setLevel(value)
 }
 
-private getScaledHue(value) {
-	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-}
-
-private getScaledSaturation(value) {
-	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-}
-
 def setColor(value){
 	log.trace "setColor($value)"
-	zigbee.on() +
-	zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
-		getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.on() + setHue(value.hue) + "delay 500" + setSaturation(value.saturation)
 }
 
 def setHue(value) {
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
+	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
 }
 
 def setSaturation(value) {
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def installed() {
@@ -179,4 +161,4 @@ def installed() {
 			sendEvent(name: "level", value: 100)
 		}
 	}
-}
+}

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2017 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -78,7 +78,6 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
-private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 
@@ -103,11 +102,11 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
                 sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
                 sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
             }
         }
@@ -142,13 +141,7 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() +
-    zigbee.levelRefresh() +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
-    zigbee.onOffConfig(0, 300) +
-    zigbee.levelConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
 }
 
 def configure() {
@@ -163,12 +156,7 @@ def configure() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    value = value as Integer
-    def tempInMired = (1000000 / value) as Integer
-    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
-
-    zigbee.command(COLOR_CONTROL_CLUSTER, 0x0A, "$finalHex 0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
+    zigbee.setColorTemperature(value)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
@@ -192,31 +180,19 @@ def setLevel(value) {
     zigbee.setLevel(value)
 }
 
-private getScaledHue(value) {
-    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-}
-
-private getScaledSaturation(value) {
-    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-}
-
 def setColor(value){
     log.trace "setColor($value)"
-    zigbee.on() +
-    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
-        getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.on() + setHue(value.hue) + "delay 300" + setSaturation(value.saturation)
 }
 
 def setHue(value) {
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
+    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
 }
 
 def setSaturation(value) {
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def installed() {
@@ -225,4 +201,4 @@ def installed() {
             sendEvent(name: "level", value: 100)
         }
     }
-}
+}

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2017 SmartThings
+ *  Copyright 2015 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -71,11 +71,6 @@ metadata {
     }
 }
 
-// Globals
-private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
-
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -128,11 +123,7 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() +
-    zigbee.levelRefresh() +
-    zigbee.colorTemperatureRefresh() +
-    zigbee.onOffConfig(0, 300) +
-    zigbee.levelConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
 }
 
 def configure() {
@@ -147,12 +138,7 @@ def configure() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-	value = value as Integer
-    def tempInMired = (1000000 / value) as Integer
-    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
-
-    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
+    zigbee.setColorTemperature(value)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2017 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -55,7 +55,6 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
-private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 
 // Parse incoming device messages to generate events
@@ -73,11 +72,11 @@ def parse(String description) {
 
 		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
 			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
 				sendEvent(name: "hue", value: hueValue, displayed:false)
 			}
 			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
 				sendEvent(name: "saturation", value: saturationValue, displayed:false)
 			}
 		}
@@ -109,46 +108,28 @@ def configure() {
 }
 
 def configureAttributes() {
-	zigbee.onOffConfig() +
-	zigbee.levelConfig()
+	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
 }
 
 def refreshAttributes() {
-	zigbee.onOffRefresh() +
-	zigbee.levelRefresh() +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setLevel(value) {
 	zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
-private getScaledHue(value) {
-	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-}
-
-private getScaledSaturation(value) {
-	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-}
-
 def setColor(value){
 	log.trace "setColor($value)"
-	zigbee.on() +
-	zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
-		getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
 }
 
 def setHue(value) {
-	//payload-> hue value, direction (00-> shortest distance), transition time (1/10th second)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
+	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)      //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
 }
 
 def setSaturation(value) {
-	//payload-> sat value, transition time
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
 }

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2017 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -70,7 +70,6 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
-private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 
@@ -89,11 +88,11 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
                 sendEvent(name: "saturation", value: saturationValue, displayed:false)
             }
         }
@@ -125,16 +124,11 @@ def configure() {
 }
 
 def configureAttributes() {
-    zigbee.onOffConfig() +
-    zigbee.levelConfig()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
 }
 
 def refreshAttributes() {
-    zigbee.onOffRefresh() +
-    zigbee.levelRefresh() +
-    zigbee.colorTemperatureRefresh() +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
@@ -145,32 +139,17 @@ def setLevel(value) {
     zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()        //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
-private getScaledHue(value) {
-    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-}
-
-private getScaledSaturation(value) {
-    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-}
-
 def setColor(value){
     log.trace "setColor($value)"
-    zigbee.on() +
-    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
-        getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
-    zigbee.onOffRefresh() +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
 }
 
 def setHue(value) {
-    //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
+    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
 }
 
 def setSaturation(value) {
-    //payload-> sat value, transition time
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
 }

devicetypes/smartthings/zll-white-color-temperature-bulb-5000k.src/zll-white-color-temperature-bulb-5000k.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2017 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -66,11 +66,6 @@ metadata {
     }
 }
 
-// Globals
-private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
-
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -100,14 +95,14 @@ def setLevel(value) {
 }
 
 def refresh() {
-    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+	def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 
-    // Do NOT config if the device is the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, and maybe other weird things with the others
+	// Do NOT config if the device is the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, and maybe other weird things with the others
     if (!((device.getDataValue("manufacturer") == "Eaton") && (device.getDataValue("model") == "Halo_LT01"))) {
-        cmds += zigbee.onOffConfig() + zigbee.levelConfig()
+        cmds = cmds + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
     }
 
-    cmds
+	cmds
 }
 
 def poll() {
@@ -143,7 +138,7 @@ def configure() {
     log.debug "configure()"
     configureHealthCheck()
     // Implementation note: for the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, so be sure this is before the call to onOffRefresh
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
 def updated() {
@@ -153,12 +148,7 @@ def updated() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    value = value as Integer
-    def tempInMired = (1000000 / value) as Integer
-    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
-
-    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
+    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2017 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -68,11 +68,6 @@ metadata {
     }
 }
 
-// Globals
-private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
-
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -99,11 +94,7 @@ def setLevel(value) {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() +
-    zigbee.levelRefresh() +
-    zigbee.colorTemperatureRefresh() +
-    zigbee.onOffConfig() +
-    zigbee.levelConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
 }
 
 def poll() {
@@ -138,7 +129,8 @@ def configureHealthCheck() {
 def configure() {
     log.debug "configure()"
     configureHealthCheck()
-    refresh()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+
 }
 
 def updated() {
@@ -148,12 +140,7 @@ def updated() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    value = value as Integer
-    def tempInMired = (1000000 / value) as Integer
-    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
-
-    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
+    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

smartapps/gideon-api/gideon-smart-home.src/gideon-smart-home.groovy

@@ -765,6 +765,7 @@ def turnOffSwitch() {
         } else {
             
             device.off();
+                  
             return [Device_id: params.id, result_action: "200"]
         }
 }
@@ -788,7 +789,6 @@ def getTempSensorsStatus(id) {
             return []
         } else {
         	def bat = getBatteryStatus(device.id)
-            def scale = [Scale: location.temperatureScale]
-        	return [temperature: device.currentValue('temperature')] + bat + scale
+        	return [temperature: device.currentValue('temperature')] + bat
    		}
-   }
+   }

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -1,7 +1,3 @@
-import javax.crypto.Mac;
-import javax.crypto.spec.SecretKeySpec;
-import java.security.InvalidKeyException;
-
 /**
  *  OpenT2T SmartApp Test
  *
@@ -43,7 +39,7 @@ definition(
  *  garageDoors         | door          | open, close           | unknown, closed, open, closing, opening
  *  cameras             | image         | take                  | <String>
  *  thermostats         | thermostat    | setHeatingSetpoint,   | temperature, heatingSetpoint, coolingSetpoint,
- * 	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
+ *	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
  *                      |				| off, heat, cool, auto,| thermostatFanMode, thermostatOperatingState
  *                      |				| emergencyHeat,        |
  *                      |				| setThermostatMode,    |
@@ -59,7 +55,7 @@ preferences {
 		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false, hideWhenEmpty: true
 		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false, hideWhenEmpty: true
 		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false, hideWhenEmpty: true
-		input "cameras", "capability.videoCapture", title: "Which Cameras?", multiple: true, required: false, hideWhenEmpty: true
+		input "cameras", "capability.videoCapture", title: "Which Cameras?",  multiple: true, required: false, hideWhenEmpty: true
 		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false, hideWhenEmpty: true
 		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false, hideWhenEmpty: true
 		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false, hideWhenEmpty: true
@@ -70,49 +66,44 @@ preferences {
 
 def getInputs() {
 	def inputList = []
-	inputList += contactSensors ?: []
-	inputList += garageDoors ?: []
-	inputList += locks ?: []
-	inputList += cameras ?: []
-	inputList += motionSensors ?: []
-	inputList += presenceSensors ?: []
-	inputList += switches ?: []
-	inputList += thermostats ?: []
-	inputList += waterSensors ?: []
+	inputList += contactSensors?: []
+	inputList += garageDoors?: []
+	inputList += locks?: []
+	inputList += cameras?: []
+	inputList += motionSensors?: []
+	inputList += presenceSensors?: []
+	inputList += switches?: []
+	inputList += thermostats?: []
+	inputList += waterSensors?: []
 	return inputList
 }
 
 //API external Endpoints
 mappings {
 	path("/devices") {
-		action:
-		[
+		action: [
 				GET: "getDevices"
 		]
 	}
 	path("/devices/:id") {
-		action:
-		[
+		action: [
 				GET: "getDevice"
 		]
 	}
 	path("/update/:id") {
-		action:
-		[
+		action: [
 				PUT: "updateDevice"
 		]
 	}
 	path("/deviceSubscription") {
-		action:
-		[
-				POST  : "registerDeviceChange",
+		action: [
+				POST: "registerDeviceChange",
 				DELETE: "unregisterDeviceChange"
 		]
 	}
 	path("/locationSubscription") {
-		action:
-		[
-				POST  : "registerDeviceGraph",
+		action: [
+				POST: "registerDeviceGraph",
 				DELETE: "unregisterDeviceGraph"
 		]
 	}
@@ -125,21 +116,14 @@ def installed() {
 
 def updated() {
 	log.debug "Updating with settings: ${settings}"
-
-	//Initialize state variables if didn't exist.
-	if (state.deviceSubscriptionMap == null) {
+	if(state.deviceSubscriptionMap == null){
 		state.deviceSubscriptionMap = [:]
 		log.debug "deviceSubscriptionMap created."
 	}
-	if (state.locationSubscriptionMap == null) {
+	if( state.locationSubscriptionMap == null){
 		state.locationSubscriptionMap = [:]
 		log.debug "locationSubscriptionMap created."
 	}
-	if (state.verificationKeyMap == null) {
-		state.verificationKeyMap = [:]
-		log.debug "verificationKeyMap created."
-	}
-
 	unsubscribe()
 	registerAllDeviceSubscriptions()
 }
@@ -148,11 +132,9 @@ def initialize() {
 	log.debug "Initializing with settings: ${settings}"
 	state.deviceSubscriptionMap = [:]
 	log.debug "deviceSubscriptionMap created."
+	registerAllDeviceSubscriptions()
 	state.locationSubscriptionMap = [:]
 	log.debug "locationSubscriptionMap created."
-	state.verificationKeyMap = [:]
-	log.debug "verificationKeyMap created."
-	registerAllDeviceSubscriptions()
 }
 
 /*** Subscription Functions  ***/
@@ -166,7 +148,7 @@ def registerAllDeviceSubscriptions() {
 def registerChangeHandler(myList) {
 	myList.each { myDevice ->
 		def theAtts = myDevice.supportedAttributes
-		theAtts.each { att ->
+		theAtts.each {att ->
 			subscribe(myDevice, att.name, deviceEventHandler)
 			log.info "Registering for ${myDevice.displayName}.${att.name}"
 		}
@@ -178,38 +160,31 @@ def registerDeviceChange() {
 	def subscriptionEndpt = params.subscriptionURL
 	def deviceId = params.deviceId
 	def myDevice = findDevice(deviceId)
-
-	if (myDevice == null) {
+	if( myDevice == null ){
 		httpError(404, "Cannot find device with device ID ${deviceId}.")
 	}
 
 	def theAtts = myDevice.supportedAttributes
 	try {
-		theAtts.each { att ->
+		theAtts.each {att ->
 			subscribe(myDevice, att.name, deviceEventHandler)
 		}
 		log.info "Subscribing for ${myDevice.displayName}"
 
-		if (subscriptionEndpt != null) {
-			if (state.deviceSubscriptionMap[deviceId] == null) {
+		if(subscriptionEndpt != null){
+			if(state.deviceSubscriptionMap[deviceId] == null){
 				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
-			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)) {
+			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)){
 				state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
 			}
-
-			if (params.key != null) {
-				state.verificationKeyMap[subscriptionEndpt] = params.key
-				log.info "Added verification key: ${params.key} for ${subscriptionEndpt}"
-			}
 		}
 	} catch (e) {
 		httpError(500, "something went wrong: $e")
 	}
 
 	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
-	log.info "Current verification key map is ${state.verificationKeyMap}"
 	return ["succeed"]
 }
 
@@ -219,19 +194,18 @@ def unregisterDeviceChange() {
 	def deviceId = params.deviceId
 	def myDevice = findDevice(deviceId)
 
-	if (myDevice == null) {
+	if( myDevice == null ){
 		httpError(404, "Cannot find device with device ID ${deviceId}.")
 	}
 
 	try {
-		if (subscriptionEndpt != null && subscriptionEndpt != "undefined") {
-			if (state.deviceSubscriptionMap[deviceId]?.contains(subscriptionEndpt)) {
-				if (state.deviceSubscriptionMap[deviceId].size() == 1) {
+		if(subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+			if (state.deviceSubscriptionMap[deviceId]?.contains(subscriptionEndpt)){
+				if(state.deviceSubscriptionMap[deviceId].size() == 1){
 					state.deviceSubscriptionMap.remove(deviceId)
 				} else {
 					state.deviceSubscriptionMap[deviceId].remove(subscriptionEndpt)
 				}
-				state.verificationKeyMap.remove(subscriptionEndpt)
 				log.info "Removed subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
 			}
 		} else {
@@ -243,33 +217,25 @@ def unregisterDeviceChange() {
 	}
 
 	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
-	log.info "Current verification key map is ${state.verificationKeyMap}"
 }
 
 //Endpoints function: Subscribe to device additiona/removal updated in a location
 def registerDeviceGraph() {
 	def subscriptionEndpt = params.subscriptionURL
 
-	if (subscriptionEndpt != null && subscriptionEndpt != "undefined") {
+	if (subscriptionEndpt != null && subscriptionEndpt != "undefined"){
 		subscribe(location, "DeviceCreated", locationEventHandler, [filterEvents: false])
 		subscribe(location, "DeviceUpdated", locationEventHandler, [filterEvents: false])
 		subscribe(location, "DeviceDeleted", locationEventHandler, [filterEvents: false])
 
-		if (state.locationSubscriptionMap[location.id] == null) {
+		if(state.locationSubscriptionMap[location.id] == null){
 			state.locationSubscriptionMap.put(location.id, [subscriptionEndpt])
 			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
-		} else if (!state.locationSubscriptionMap[location.id].contains(subscriptionEndpt)) {
+		} else if (!state.locationSubscriptionMap[location.id].contains(subscriptionEndpt)){
 			state.locationSubscriptionMap[location.id] << subscriptionEndpt
 			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
 		}
-
-		if (params.key != null) {
-			state.verificationKeyMap[subscriptionEndpt] = params.key
-			log.info "Added verification key: ${params.key} for ${subscriptionEndpt}"
-		}
-
 		log.info "Current location subscription map is ${state.locationSubscriptionMap}"
-		log.info "Current verification key map is ${state.verificationKeyMap}"
 		return ["succeed"]
 	} else {
 		httpError(400, "missing input parameter: subscriptionURL")
@@ -281,17 +247,16 @@ def unregisterDeviceGraph() {
 	def subscriptionEndpt = params.subscriptionURL
 
 	try {
-		if (subscriptionEndpt != null && subscriptionEndpt != "undefined") {
-			if (state.locationSubscriptionMap[location.id]?.contains(subscriptionEndpt)) {
-				if (state.locationSubscriptionMap[location.id].size() == 1) {
+		if(subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+			if (state.locationSubscriptionMap[location.id]?.contains(subscriptionEndpt)){
+				if(state.locationSubscriptionMap[location.id].size() == 1){
 					state.locationSubscriptionMap.remove(location.id)
 				} else {
 					state.locationSubscriptionMap[location.id].remove(subscriptionEndpt)
 				}
-				state.verificationKeyMap.remove(subscriptionEndpt)
 				log.info "Removed subscription URL: ${subscriptionEndpt} for Location ${location.name}"
 			}
-		} else {
+		}else{
 			httpError(400, "missing input parameter: subscriptionURL")
 		}
 	} catch (e) {
@@ -299,40 +264,28 @@ def unregisterDeviceGraph() {
 	}
 
 	log.info "Current location subscription map is ${state.locationSubscriptionMap}"
-	log.info "Current verification key map is ${state.verificationKeyMap}"
 }
 
 //When events are triggered, send HTTP post to web socket servers
 def deviceEventHandler(evt) {
-	def evtDevice = evt.device
-	def evtDeviceType = getDeviceType(evtDevice)
-	def deviceData = [];
+	def evt_device = evt.device
+	def evt_deviceType = getDeviceType(evt_device)
+	def deviceInfo
 
-	if (evt.data != null) {
+	def params = [ body: [deviceName: evt_device.displayName, deviceId: evt_device.id,  locationId: location.id] ]
+
+	if(evt.data != null){
 		def evtData = parseJson(evt.data)
-		log.info "Received event for ${evtDevice.displayName}, data: ${evtData},  description: ${evt.descriptionText}"
+		log.info "Received event for ${evt_device.displayName}, data: ${evtData},  description: ${evt.descriptionText}"
 	}
 
-	if (evtDeviceType == "thermostat") {
-		deviceData = [name: evtDevice.displayName, id: evtDevice.id, status: evtDevice.status, deviceType: evtDeviceType, manufacturer: evtDevice.manufacturerName, model: evtDevice.modelName, attributes: deviceAttributeList(evtDevice, evtDeviceType), locationMode: getLocationModeInfo(), locationId: location.id]
-	} else {
-		deviceData = [name: evtDevice.displayName, id: evtDevice.id, status: evtDevice.status, deviceType: evtDeviceType, manufacturer: evtDevice.manufacturerName, model: evtDevice.modelName, attributes: deviceAttributeList(evtDevice, evtDeviceType), locationId: location.id]
-	}
-
-	def params = [body: deviceData]
-
 	//send event to all subscriptions urls
-	log.debug "Current subscription urls for ${evtDevice.displayName} is ${state.deviceSubscriptionMap[evtDevice.id]}"
-	state.deviceSubscriptionMap[evtDevice.id].each {
+	log.debug "Current subscription urls for ${evt_device.displayName} is ${state.deviceSubscriptionMap[evt_device.id]}"
+	state.deviceSubscriptionMap[evt_device.id].each {
 		params.uri = "${it}"
-		if (state.verificationKeyMap[it] != null) {
-			def key = state.verificationKeyMap[it]
-			params.header = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
-		}
 		log.trace "POST URI: ${params.uri}"
-		log.trace "Header: ${params.header}"
 		log.trace "Payload: ${params.body}"
-		try {
+		try{
 			httpPostJson(params) { resp ->
 				log.trace "response status code: ${resp.status}"
 				log.trace "response data: ${resp.data}"
@@ -345,27 +298,20 @@ def deviceEventHandler(evt) {
 
 def locationEventHandler(evt) {
 	log.info "Received event for location ${location.name}/${location.id}, Event: ${evt.name}, description: ${evt.descriptionText}, apiServerUrl: ${apiServerUrl("")}"
-	switch (evt.name) {
+	switch(evt.name){
 		case "DeviceCreated":
 		case "DeviceDeleted":
-			def evtDevice = evt.device
-			def evtDeviceType = getDeviceType(evtDevice)
-			def params = [body: [eventType: evt.name, deviceId: evtDevice.id, locationId: location.id]]
+			def evt_device = evt.device
+			def evt_deviceType = getDeviceType(evt_device)
+			log.info "DeviceName: ${evt_device.displayName}, DeviceID: ${evt_device.id}, deviceType: ${evt_deviceType}"
 
-			if (evt.name == "DeviceDeleted" && state.deviceSubscriptionMap[deviceId] != null) {
-				state.deviceSubscriptionMap.remove(evtDevice.id)
-			}
+			def params = [ body: [ eventType:evt.name, deviceId: evt_device.id, locationId: location.id ] ]
 
 			state.locationSubscriptionMap[location.id].each {
 				params.uri = "${it}"
-				if (state.verificationKeyMap[it] != null) {
-					def key = state.verificationKeyMap[it]
-					params.header = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
-				}
 				log.trace "POST URI: ${params.uri}"
-				log.trace "Header: ${params.header}"
 				log.trace "Payload: ${params.body}"
-				try {
+				try{
 					httpPostJson(params) { resp ->
 						log.trace "response status code: ${resp.status}"
 						log.trace "response data: ${resp.data}"
@@ -380,23 +326,6 @@ def locationEventHandler(evt) {
 	}
 }
 
-private ComputHMACValue(key, data) {
-	try {
-		SecretKeySpec secretKeySpec = new SecretKeySpec(key.getBytes("UTF-8"), "HmacSHA1")
-		Mac mac = Mac.getInstance("HmacSHA1")
-		mac.init(secretKeySpec)
-		byte[] digest = mac.doFinal(data.getBytes("UTF-8"))
-		return byteArrayToString(digest)
-	} catch (InvalidKeyException e) {
-		log.error "Invalid key exception while converting to HMac SHA1"
-	}
-}
-
-private def byteArrayToString(byte[] data) {
-	BigInteger bigInteger = new BigInteger(1, data)
-	String hash = bigInteger.toString(16)
-	return hash
-}
 
 /*** Device Query/Update Functions  ***/
 
@@ -405,10 +334,10 @@ def getDevices() {
 	def deviceData = []
 	inputs?.each {
 		def deviceType = getDeviceType(it)
-		if (deviceType == "thermostat") {
-			deviceData << [name: it.displayName, id: it.id, status: it.status, deviceType: deviceType, manufacturer: it.manufacturerName, model: it.modelName, attributes: deviceAttributeList(it, deviceType), locationMode: getLocationModeInfo()]
+		if(deviceType == "thermostat") {
+			deviceData << [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType), locationMode: getLocationModeInfo()]
 		} else {
-			deviceData << [name: it.displayName, id: it.id, status: it.status, deviceType: deviceType, manufacturer: it.manufacturerName, model: it.modelName, attributes: deviceAttributeList(it, deviceType)]
+			deviceData << [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType)]
 		}
 	}
 
@@ -421,10 +350,10 @@ def getDevice() {
 	def it = findDevice(params.id)
 	def deviceType = getDeviceType(it)
 	def device
-	if (deviceType == "thermostat") {
-		device = [name: it.displayName, id: it.id, status: it.status, deviceType: deviceType, manufacturer: it.manufacturerName, model: it.modelName, attributes: deviceAttributeList(it, deviceType), locationMode: getLocationModeInfo()]
+	if(deviceType == "thermostat") {
+		device = [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it,deviceType), locationMode: getLocationModeInfo()]
 	} else {
-		device = [name: it.displayName, id: it.id, status: it.status, deviceType: deviceType, manufacturer: it.manufacturerName, model: it.modelName, attributes: deviceAttributeList(it, deviceType)]
+		device = [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType)]
 	}
 
 	log.debug "getDevice, return: ${device}"
@@ -437,18 +366,18 @@ void updateDevice() {
 	request.JSON.each {
 		def command = it.key
 		def value = it.value
-		if (command) {
+		if (command){
 			def commandList = mapDeviceCommands(command, value)
 			command = commandList[0]
 			value = commandList[1]
 
 			if (command == "setAwayMode") {
 				log.info "Setting away mode to ${value}"
-				if (location.modes?.find { it.name == value }) {
+				if (location.modes?.find {it.name == value}) {
 					location.setMode(value)
 				}
-			} else if (command == "thermostatSetpoint") {
-				switch (device.currentThermostatMode) {
+			}else if (command == "thermostatSetpoint"){
+				switch(device.currentThermostatMode){
 					case "cool":
 						log.info "Update: ${device.displayName}, [${command}, ${value}]"
 						device.setCoolingSetpoint(value)
@@ -462,7 +391,7 @@ void updateDevice() {
 						httpError(501, "this mode: ${device.currentThermostatMode} does not allow changing thermostat setpoint.")
 						break
 				}
-			} else if (!device) {
+			}else if (!device) {
 				log.error "updateDevice, Device not found"
 				httpError(404, "Device not found")
 			} else if (!device.hasCommand(command)) {
@@ -472,11 +401,11 @@ void updateDevice() {
 				if (command == "setColor") {
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(hex: value)
-				} else if (value.isNumber()) {
+				} else if(value.isNumber()) {
 					def intValue = value as Integer
 					log.info "Update: ${device.displayName}, [${command}, ${intValue}(int)]"
 					device."$command"(intValue)
-				} else if (value) {
+				} else if (value){
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(value)
 				} else {
@@ -503,16 +432,17 @@ private getDeviceType(device) {
 	log.debug "supported commands: [${device}, ${device.supportedCommands}]"
 
 	//Loop through the device capability list to determine the device type.
-	capabilities.each { capability ->
-		switch (capability.name.toLowerCase()) {
+	capabilities.each {capability ->
+		switch(capability.name.toLowerCase())
+		{
 			case "switch":
 				deviceType = "switch"
 
 				//If the device also contains "Switch Level" capability, identify it as a "light" device.
-				if (capabilities.any { it.name.toLowerCase() == "switch level" }) {
+				if (capabilities.any{it.name.toLowerCase() == "switch level"}){
 
 					//If the device also contains "Power Meter" capability, identify it as a "dimmerSwitch" device.
-					if (capabilities.any { it.name.toLowerCase() == "power meter" }) {
+					if (capabilities.any{it.name.toLowerCase() == "power meter"}){
 						deviceType = "dimmerSwitch"
 						return deviceType
 					} else {
@@ -559,24 +489,24 @@ private deviceAttributeList(device, deviceType) {
 	allAttributes.each { attribute ->
 		try {
 			def currentState = device.currentState(attribute.name)
-			if (currentState != null) {
-				switch (attribute.name) {
+			if(currentState != null ){
+				switch(attribute.name){
 					case 'temperature':
-						attributeList.putAll([(attribute.name): currentState.value, 'temperatureScale': location.temperatureScale])
+						attributeList.putAll([ (attribute.name): currentState.value, 'temperatureScale':location.temperatureScale ])
 						break;
 					default:
-						attributeList.putAll([(attribute.name): currentState.value])
+						attributeList.putAll([(attribute.name): currentState.value ])
 						break;
 				}
-				if (deviceType == "genericSensor") {
+				if( deviceType == "genericSensor" ){
 					def key = attribute.name + "_lastUpdated"
-					attributeList.putAll([(key): currentState.isoDate])
+					attributeList.putAll([ (key): currentState.isoDate ])
 				}
 			} else {
-				attributeList.putAll([(attribute.name): null]);
+				attributeList.putAll([ (attribute.name): null ]);
 			}
-		} catch (e) {
-			attributeList.putAll([(attribute.name): null]);
+		} catch(e) {
+			attributeList.putAll([ (attribute.name): null ]);
 		}
 	}
 	return attributeList
@@ -649,7 +579,8 @@ private mapDeviceCommands(command, value) {
 			if (value == 1 || value == "1" || value == "lock") {
 				resultCommand = "lock"
 				resultValue = ""
-			} else if (value == 0 || value == "0" || value == "unlock") {
+			}
+			else if (value == 0 || value == "0" || value == "unlock") {
 				resultCommand = "unlock"
 				resultValue = ""
 			}
@@ -658,5 +589,5 @@ private mapDeviceCommands(command, value) {
 			break
 	}
 
-	return [resultCommand, resultValue]
+	return [resultCommand,resultValue]
 }