MSA-2048: chime

Rolling down staging to master

devicetypes/krlaframboise/zooz-smart-chime.src/zooz-smart-chime.groovy

@@ -0,0 +1,813 @@
+/**
+ *  Zooz Smart Chime v1.2.1
+ *  (Model: ZSE33)
+ *
+ *  Author: 
+ *    Kevin LaFramboise (krlaframboise)
+ *
+ *  URL to documentation:  https://community.smartthings.com/t/release-zooz-smart-chime/77152?u=krlaframboise
+ *    
+ *
+ *  Changelog:
+ *
+ *    1.2.1 (04/23/2017)
+ *    	- SmartThings broke parse method response handling so switched to sendhubaction.
+ *    	- Bug fix for location timezone issue.
+ *
+ *    1.2 (04/14/2017)
+ *      - Added Switch Level capability
+ *
+ *    1.1 (02/19/2017)
+ *      - Added Health Check and self polling.
+ *
+ *    1.0 (01/16/2017)
+ *      - Initial Release
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "Zooz Smart Chime", 
+		namespace: "krlaframboise", 
+		author: "Kevin LaFramboise"
+	) {
+		capability "Actuator"
+		capability "Alarm"
+		capability "Battery"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Switch"
+		capability "Tone"
+		capability "Health Check"
+		capability "Polling"
+		capability "Switch Level"
+		
+		attribute "lastCheckin", "string"
+		
+		attribute "status", "enum", ["alarm", "beep", "off", "on", "custom"]
+		
+		command "customChime"
+		
+		fingerprint deviceId: "0x1005", inClusters: "0x25, 0x59, 0x5A, 0x5E, 0x70, 0x71, 0x72, 0x73, 0x80, 0x85, 0x86, 0x87"
+		
+		fingerprint mfr:"027A", prod:"0003", model:"0088"
+	}
+	
+	simulator { }
+	
+	preferences {
+		input "sirenSound", "number",
+			title: "Siren Sound [1-10]:",
+			range: "1..10",
+			displayDuringSetup: true,
+			defaultValue: sirenSoundSetting
+		input "sirenVolume", "number",
+			title: "Siren Volume [1-3]:${getNameValueSettingDesc(volumeOptions)}",
+			range: "1..3",
+			required: false,
+			defaultValue: sirenVolumeSetting,			
+			displayDuringSetup: true
+		input "sirenLength", "number",
+			title: "Siren Length [0-4]:${getNameValueSettingDesc(sirenLengthOptions)}",
+			range: "0..4",
+			defaultValue: sirenLengthSetting,
+			required: false,
+			displayDuringSetup: true
+		input "sirenLED", "number",
+			title: "Siren LED [0-1]:${getNameValueSettingDesc(ledOptions)}",
+			range: "0..1",
+			defaultValue: sirenLEDSetting,
+			required: false,
+			displayDuringSetup: true		
+		input "onChimeSound", "number",
+			title: "Switch On Chime Sound [1-10]:",
+			range: "1..10",
+			required: false,
+			displayDuringSetup: true,
+			defaultValue: onChimeSoundSetting
+		input "beepChimeSound", "number",
+			title: "Beep Chime Sound [1-10]:",
+			range: "1..10",
+			required: false,
+			displayDuringSetup: true,
+			defaultValue: beepChimeSoundSetting
+		input "chimeVolume", "number",
+			title: "Chime Volume [1-3]:${getNameValueSettingDesc(volumeOptions)}",
+			range: "1..3",
+			required: false,
+			defaultValue: chimeVolumeSetting,
+			displayDuringSetup: true
+		input "chimeRepeat", "number",
+			title: "Chime Repeat [1-255]:\n(1-254 = # of Cycles)\n(255 = ${noLengthMsg})",
+			range: "1..255",
+			required: false,
+			displayDuringSetup: true,
+			defaultValue: chimeRepeatSetting
+		input "chimeLED", "number",
+			title: "Chime LED [0-1]:${getNameValueSettingDesc(ledOptions)}",
+			range: "0..1",
+			defaultValue: chimeLEDSetting,
+			required: false,
+			displayDuringSetup: true
+		input "checkinInterval", "enum",
+			title: "Checkin Interval:",
+			defaultValue: checkinIntervalSetting,
+			required: false,
+			displayDuringSetup: true,
+			options: checkinIntervalOptions.collect { it.name }
+		input "debugOutput", "bool", 
+			title: "Enable debug logging?", 
+			defaultValue: true, 
+			required: false
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
+				attributeState "off", 
+					label:'Off', 
+					action: "off", 
+					icon: "st.Entertainment.entertainment2",
+					backgroundColor:"#ffffff"
+				attributeState "on", 
+					label:'Chime (On)!', 
+					action: "off", 
+					icon:"st.Entertainment.entertainment2", 					
+					backgroundColor: "#99c2ff"					
+				attributeState "alarm", 
+					label:'Siren!', 
+					action: "off", 
+					icon:"st.alarm.alarm.alarm", 
+					backgroundColor:"#ff9999"
+				attributeState "beep", 
+					label:'Chime (Beep)!', 
+					action: "off", 
+					icon:"st.Entertainment.entertainment2", 
+					backgroundColor:"#99ff99"
+				attributeState "custom", 
+					label:'Chime (Custom)!', 
+					action: "off", 
+					icon:"st.Entertainment.entertainment2", 
+					backgroundColor:"#cc99cc"				
+			}
+		}
+		
+		standardTile("playAlarm", "device.alarm", width: 2, height: 2) {
+			state "default", 
+				label:'Alarm', 
+				action:"alarm.both", 
+				icon:"st.security.alarm.clear", 
+				backgroundColor:"#ff9999"
+			state "both",
+				label:'Turn Off',
+				action:"alarm.off",
+				icon:"st.alarm.alarm.alarm", 
+				background: "#ffffff"	
+		}
+				
+		standardTile("playOn", "device.switch", width: 2, height: 2) {
+			state "default", 
+				label:'Turn On', 
+				action:"switch.on", 
+				icon:"st.Entertainment.entertainment2", 
+				backgroundColor:"#99c2ff"
+			state "on",
+				label:'Turn Off',
+				action:"switch.off",
+				icon:"st.Entertainment.entertainment2", 
+				background: "#ffffff"	
+		}
+		
+		standardTile("playBeep", "device.status", width: 2, height: 2) {
+			state "default", 
+				label:'Beep', 
+				action:"tone.beep", 
+				icon:"st.Entertainment.entertainment2", 
+				backgroundColor: "#99FF99"
+			state "beep",
+				label:'Stop',
+				action:"off",
+				icon:"st.Entertainment.entertainment2", 
+				background: "#ffffff"	
+		}
+		
+		standardTile("turnOff", "device.off", width: 2, height: 2) {
+			state "default", 
+				label:'Off', 
+				action:"switch.off", 
+				backgroundColor: "#ffffff"			
+		}
+		
+		standardTile("refresh", "device.refresh", width: 2, height: 2) {
+			state "refresh", label:'Refresh', action: "refresh", icon:"st.secondary.refresh-icon"
+		}
+		
+		valueTile("battery", "device.battery", decoration: "flat", width: 2, height: 2){
+			state "battery", label:'${currentValue}% battery', unit:""
+		}		
+				
+		main "status"
+		details(["status", "playOn", "playBeep", "playAlarm", "turnOff", "refresh", "battery"])
+	}
+}
+
+def updated() {	
+	// This method always gets called twice when preferences are saved.
+	if (!isDuplicateCommand(state.lastUpdated, 3000)) {		
+		state.lastUpdated = new Date().time
+		state.activeEvents = []
+		logTrace "updated()"
+		
+		initializeCheckin()
+		
+		if (state.firstUpdate == false) {
+			def result = []
+			result += configure()
+			if (result) {
+				return sendResponse(result)
+			}
+		}
+		else {
+			// Skip first time updating because it calls the configure method while it's already running.
+			state.firstUpdate = false
+		}
+	}	
+}
+
+private sendResponse(cmds) {
+	def actions = []
+	cmds?.each { cmd ->
+		actions << new physicalgraph.device.HubAction(cmd)
+	}	
+	sendHubCommand(actions)
+	return []
+}
+
+private initializeCheckin() {
+// Set the Health Check interval so that it pings the device if it's 1 minute past the scheduled checkin.
+	def checkInterval = ((checkinIntervalSettingMinutes * 60) + 60)
+	
+	sendEvent(name: "checkInterval", value: checkInterval, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	
+	unschedule(healthPoll)
+	switch (checkinIntervalSettingMinutes) {
+		case 5:
+			runEvery5Minutes(healthPoll)
+			break
+		case 10:
+			runEvery10Minutes(healthPoll)
+			break
+		case 15:
+			runEvery15Minutes(healthPoll)
+			break
+		case 30:
+			runEvery30Minutes(healthPoll)
+			break
+		case [60, 120]:
+			runEvery1Hour(healthPoll)
+			break
+		default:
+			runEvery3Hours(healthPoll)			
+	}
+}
+
+def healthPoll() {
+	logTrace "healthPoll()"
+	sendHubCommand([new physicalgraph.device.HubAction(batteryGetCmd())], 100)
+}
+
+def ping() {
+	logTrace "ping()"
+	if (canCheckin()) {
+		logDebug "Attempting to ping device."
+		// Restart the polling schedule in case that's the reason why it's gone too long without checking in.
+		initializeCheckin()
+		
+		return poll()	
+	}	
+}
+
+def poll() {
+	if (canCheckin()) {
+		logTrace "Polling Device"
+		return batteryGetCmd()
+	}
+	else {
+		logTrace "Skipped Poll"
+	}
+}
+
+def configure() {
+	logTrace "configure()"
+	def cmds = []
+	def refreshAll = (!state.isConfigured || state.pendingRefresh || !settings?.sirenSound)
+	
+	if (!state.isConfigured) {
+		logTrace "Waiting 1 second because this is the first time being configured"		
+		cmds << "delay 1000"			
+	}
+	
+	configData.each { 
+		cmds += updateConfigVal(it.paramNum, it.value, refreshAll)	
+	}
+	
+	if (refreshAll) {
+		cmds << switchBinaryGetCmd()
+		cmds << batteryGetCmd()
+	}
+		
+	if (cmds) {
+		logDebug "Sending configuration to device."
+		return delayBetween(cmds, 250)
+	}
+	else {
+		return cmds
+	}	
+}
+
+private updateConfigVal(paramNum, val, refreshAll) {
+	def result = []
+	def configVal = state["configVal${paramNum}"]
+	
+	if (refreshAll || (configVal != val)) {
+		result << configSetCmd(paramNum, val)
+		result << configGetCmd(paramNum)
+	}
+	
+	return result
+}
+
+def off() {
+	logDebug "Turning Off()"
+	return sirenToggleCmds(0x00)	
+}
+
+def on() {	
+	logDebug "Playing On Chime (#${onChimeSoundSetting})"	
+	addPendingSound("switch", "on")
+	return chimePlayCmds(onChimeSoundSetting)
+}
+
+def setLevel(level, rate=null) {
+	logTrace "Executing setLevel($level)"
+	if (!device.currentValue("level")) {
+		sendEvent(name:"level", value:0, displayed:false)
+	}
+	return customChime(extractSoundFromLevel(level))	
+}
+
+private extractSoundFromLevel(level) {
+	def sound = safeToInt(level, 1)
+	if (sound <= 10) {
+		return 1
+	}
+	else {
+		if ((sound % 10) != 0) {
+			sound = (sound - (sound % 10))
+		}
+		return (sound / 10)
+	}
+}
+
+def beep() {
+	logDebug "Playing Beep Chime (#${beepChimeSoundSetting})"	
+	addPendingSound("status", "beep")
+	return chimePlayCmds(beepChimeSoundSetting)
+}
+
+def customChime(sound) {	
+	def val = validateSound(sound, beepChimeSoundSetting)
+	if ("${sound}" != "${val}") {
+		logDebug "Playing Custom Chime (#${val}) - (${sound} is not a valid sound number)"
+	}
+	else {
+		logDebug "Playing Custom Chime (#${val})"	
+	}	
+	addPendingSound("status", "custom")	
+	return chimePlayCmds(val)
+}
+
+def siren() { return both() }
+def strobe() { return both() }
+def both() {
+	logDebug "Playing Siren (#${sirenSoundSetting})"
+	addPendingSound("alarm", "both")
+
+	if (sirenLengthSetting == 0) {
+		// Siren Length is set to chime.
+		return chimePlayCmds(sirenSoundSetting)
+	}
+	else {
+		def result = []		
+		result += sirenToggleCmds(0xFF)
+		return result
+	}
+}
+
+private addPendingSound(name, value) {
+	state.pendingSound = [name: "$name", value: "$value", time: new Date().time]
+}
+
+def refresh() {	
+	logTrace "refresh()"
+	
+	state.pendingRefresh = true
+	return configure()
+}
+
+	
+def parse(String description) {
+	def result = []
+	
+	if (description.startsWith("Err")) {
+		log.warn "Parse Error: $description"
+		result << createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
+	}
+	else {
+		def cmd = zwave.parse(description, getCommandClassVersions())
+		if (cmd) {
+			result += zwaveEvent(cmd)
+		}
+		else {
+			logDebug "Unable to parse description: $description"
+		}
+	}	
+	if (canCheckin()) {
+		result << createLastCheckinEvent()
+	}	
+	return result
+}
+
+private getCommandClassVersions() {
+	[
+		0x59: 1,  // AssociationGrpInfo
+		0x5A: 1,  // DeviceResetLocally
+		0x5E: 2,  // ZwaveplusInfo
+		0x70: 1,  // Configuration
+		0x71: 3,  // Notification v4
+		0x72: 2,  // ManufacturerSpecific
+		0x73: 1,  // Powerlevel
+		0x80: 1,  // Battery
+		0x85: 2,  // Association
+		0x86: 1,  // Version (2)
+		0x87: 1,  // Indicator
+		0x25: 1,  // Switch Binary
+	]
+}
+
+private canCheckin() {
+	def minimumCheckinInterval = ((checkinIntervalSettingMinutes * 60 * 1000) - 5000)
+	return (!state.lastCheckinTime || ((new Date().time - state.lastCheckinTime) >= minimumCheckinInterval))
+}
+
+private createLastCheckinEvent() {
+	logDebug "Device Checked In"
+	state.lastCheckinTime = new Date().time
+	return createEvent(name: "lastCheckin", value: convertToLocalTimeString(new Date()), displayed: false)
+}
+
+private convertToLocalTimeString(dt) {
+	def timeZoneId = location?.timeZone?.ID
+	if (timeZoneId) {
+		return dt.format("MM/dd/yyyy hh:mm:ss a", TimeZone.getTimeZone(timeZoneId))
+	}
+	else {
+		return "$dt"
+	}	
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	logTrace "BatteryReport: $cmd"
+	def isNew = (device.currentValue("battery") != cmd.batteryLevel)
+	
+	def val = (cmd.batteryLevel == 0xFF ? 1 : cmd.batteryLevel)
+		
+	def result = []
+	result << createEvent(name: "battery", value: val, unit: "%", displayed: isNew, isStateChange: true)
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {	
+	def name = configData.find { it.paramNum == cmd.parameterNumber }?.name
+	if (name) {	
+		def val = cmd.configurationValue[0]
+	
+		logDebug "${name} = ${val}"
+	
+		state."configVal${cmd.parameterNumber}" = val
+	}
+	else {
+		logDebug "Parameter ${cmd.parameterNumber}: ${cmd.configurationValue}"
+	}
+	state.isConfigured = true
+	state.pendingRefresh = false	
+	return []
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	def result = []
+	logTrace "BasicReport: ${cmd}"
+	if (cmd.value == 0x00) {
+		result += handleDeviceOff()
+	}
+	else {
+		result += sendResponse(["delay 3000", basicGetCmd()])
+	}	
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	def result = []
+	logTrace "SwitchBinaryReport: ${cmd}"	
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def result = []	
+	logTrace "NotificationReport: ${cmd}"
+	
+	if (cmd.notificationType == 14) {
+		if (cmd.event == 0) {
+			result += handleDeviceOff()
+		}
+		else if (cmd.event == 1) {
+			result += handleDeviceOn(state.activeSound, state.pendingSound)
+		}
+	}
+	return result
+}
+
+private handleDeviceOn(activeSound, pendingSound) {
+	def result = []
+	def activeSoundName = activeSound?.name
+	
+	state.activeSound = pendingSound
+	
+	if (pendingSound) {
+		result << createEvent(getEventMap(pendingSound, true))
+		
+		def statusVal = ""
+		if (pendingSound.name == "alarm") {
+			statusVal = "alarm"
+		}
+		else if (pendingSound.name == "switch") {
+			statusVal = "on"
+		}
+		if (statusVal) {
+			result << createEvent(getStatusEventMap(statusVal))
+		}
+	}
+	else {
+		logTrace "Unable to create event on because the pending sound has not been set."
+	}		
+	return result
+}
+
+private handleDeviceOff() {
+	def result = []
+	["alarm", "switch", "status"].each { n ->			
+		def displayed = false
+		if ("${n}" == "${state.activeSound?.name}") {
+			// Only the active event was initially displayed so it's the only off event that gets displayed.
+			displayed = true
+			state.activeSound = null
+		}
+		
+		result << createEvent(getEventMap([name: "$n", value: "off"], displayed))
+	}
+
+	return result
+}
+
+private getStatusEventMap(val) {
+	return getEventMap([name: "status", value: val], false)
+}
+
+private getEventMap(event, displayed=false) {	
+	def isStateChange = (device.currentValue(event.name) != event.value)
+	def eventMap = [
+		name: event.name,
+		value: event.value,
+		displayed: displayed,
+		isStateChange: true
+	]
+	logTrace "Creating Event: ${eventMap}"
+	return eventMap
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	logDebug "Unhandled Command: $cmd"
+	return []
+}
+
+private chimePlayCmds(sound) {
+	def cmds = []
+	
+	cmds << indicatorSetCmd(sound)
+		
+	if ((sound in [1, 9, 10]) && chimeRepeatSetting == 1) {
+		// Fixes problem where these sounds stop playing before the start events are created causing the off events to never get created.
+		cmds << basicGetCmd()
+		cmds << "delay 3000"		
+	}	
+	return cmds	
+}
+
+private indicatorSetCmd(val) {
+	return zwave.indicatorV1.indicatorSet(value: val).format()
+}
+
+private sirenToggleCmds(val) {
+	return [
+		switchBinarySetCmd(val),
+		switchBinaryGetCmd()
+	]
+}
+private switchBinaryGetCmd() {
+	return zwave.switchBinaryV1.switchBinaryGet().format()
+}
+private switchBinarySetCmd(val) {
+	return zwave.switchBinaryV1.switchBinarySet(switchValue: val).format()
+}
+
+private basicGetCmd() {
+	return zwave.basicV1.basicGet().format()
+}
+
+private batteryGetCmd() {
+	return zwave.batteryV1.batteryGet().format()
+}
+
+private configGetCmd(paramNum) {
+	return zwave.configurationV1.configurationGet(parameterNumber: paramNum).format()
+}
+
+private configSetCmd(paramNum, val) {		
+	return zwave.configurationV1.configurationSet(parameterNumber: paramNum, size: 1, scaledConfigurationValue: val).format()
+}
+
+// Configuration Parameters
+private getConfigData() {
+	// [paramNum: 6, name: "Chime Sound"]
+	return [		
+		[paramNum: 5, name: "Siren Sound", value: sirenSoundSetting],
+		[paramNum: 1, name: "Siren Volume", value: sirenVolumeSetting],
+		[paramNum: 2, name: "Siren Length", value: (sirenLengthSetting == 4 ? 255 : sirenLengthSetting)],
+		[paramNum: 8, name: "Siren LED", value: sirenLEDSetting],
+		[paramNum: 4, name: "Chime Volume", value: chimeVolumeSetting],
+		[paramNum: 3, name: "Chime Repeat", value: chimeRepeatSetting],
+		[paramNum: 9, name: "Chime LED", value: chimeLEDSetting],
+		[paramNum: 7, name: "Chime Mode", value: chimeModeSetting]
+	]	
+}
+
+// Settings
+private getDebugOutputSetting() {
+	return (settings?.debugOutput != false)
+}
+private getSirenSoundSetting() {
+	return validateSound(settings?.sirenSound, 9)
+}
+private getSirenVolumeSetting() {
+	return safeToInt(settings?.sirenVolume, 3)
+}
+private getSirenLengthSetting() {
+	return safeToInt(settings?.sirenLength, 0)
+}
+private getSirenLEDSetting() {
+	return safeToInt(settings?.sirenLED, 1)
+}
+private getOnChimeSoundSetting() {
+	return validateSound(settings?.onChimeSound, 1)
+}
+private getBeepChimeSoundSetting() {
+	 return validateSound(settings?.beepChimeSound, 3)
+}
+private getChimeVolumeSetting() {
+	return safeToInt(settings?.chimeVolume, 3)
+}
+private getChimeRepeatSetting() {
+	return safeToInt(settings?.chimeRepeat, 1)
+}
+private getChimeLEDSetting() {
+	return safeToInt(settings?.chimeLED, 0)
+}
+private getChimeModeSetting() {
+	return 1 // Chime Mode should always be disabled.
+}
+
+private getCheckinIntervalSettingMinutes() {
+	return convertOptionSettingToInt(checkinIntervalOptions, checkinIntervalSetting)
+}
+
+private getCheckinIntervalSetting() {
+	return settings?.checkinInterval ?: findDefaultOptionName(checkinIntervalOptions)
+}
+
+private validateSound(sound, defaultVal) {
+	def val = safeToInt(sound, defaultVal)
+	if (val > 10) {
+		val = 10
+	}
+	else if (val < 1) {
+		val = 1
+	}
+	return val
+}
+
+private getVolumeOptions() { 
+	[
+		[name: "Low", value: 1],
+		[name: "Medium", value: 2],
+		[name: "High", value: 3]
+	]
+}
+
+private getLedOptions() { 
+	[
+		[name: "Off", value: 0],
+		[name: "On", value: 1]
+	]
+}
+
+private getSirenLengthOptions() {
+	[
+		[name: "Chime", value: 0],
+		[name: "30 Seconds", value: 1],
+		[name: "1 Minute", value: 2],
+		[name: "5 Minutes", value: 3],
+		[name: "${noLengthMsg}", value: 4] // config value is 255
+	]
+}
+
+private getNoLengthMsg() { 
+	return "Play until battery is depleted" 
+}
+
+private getNameValueSettingDesc(nameValueMap) {
+	def desc = ""
+	nameValueMap?.sort { it.value }.each { 
+		desc = "${desc}\n(${it.value} - ${it.name})"
+	}
+	return desc
+}
+
+private getCheckinIntervalOptions() {
+	[
+		[name: "5 Minutes", value: 5],
+		[name: "10 Minutes", value: 10],
+		[name: "15 Minutes", value: 15],
+		[name: "30 Minutes", value: 30],
+		[name: "1 Hour", value: 60],
+		[name: "2 Hours", value: 120],
+		[name: "3 Hours", value: 180],
+		[name: "6 Hours", value: 360],
+		[name: "9 Hours", value: 540],
+		[name: formatDefaultOptionName("12 Hours"), value: 720],
+		[name: "18 Hours", value: 1080],
+		[name: "24 Hours", value: 1440]
+	]
+}
+
+private convertOptionSettingToInt(options, settingVal) {
+	return safeToInt(options?.find { "${settingVal}" == it.name }?.value, 0)
+}
+
+private formatDefaultOptionName(val) {
+	return "${val}${defaultOptionSuffix}"
+}
+
+private findDefaultOptionName(options) {
+	def option = options?.find { it.name?.contains("${defaultOptionSuffix}") }
+	return option?.name ?: ""
+}
+
+private getDefaultOptionSuffix() {
+	return "   (Default)"
+}
+
+private safeToInt(val, defaultVal=-1) {
+	return "${val}"?.isInteger() ? "${val}".toInteger() : defaultVal
+}
+
+private isDuplicateCommand(lastExecuted, allowedMil) {
+	!lastExecuted ? false : (lastExecuted + allowedMil > new Date().time) 
+}
+
+private logDebug(msg) {
+	if (debugOutputSetting) {
+		log.debug "$msg"
+	}
+}
+
+private logTrace(msg) {
+	// log.trace "$msg"
+}

devicetypes/smartthings/aeon-key-fob.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-key-fob.src/README.md

@@ -0,0 +1,34 @@
+# Aeon Labs Key Fob
+
+Cloud Execution
+
+Works with:
+
+* [Aeon Labs Key Fob](http://aeotec.com/z-wave-key-fob-remote-control)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents device has commands
+* **Button** - represents a device with one or more buttons
+* **Holdable Button** - represents a device with one or more holdable buttons
+* **Configuration** - allows for configuration of devices
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Aeon Key Fob is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the Aeon Labs Key Fob from SmartThings can be found in the following link:
+* [Aeotec Key Fob Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294120-Aeon-Labs-Key-Fob)

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -1,3 +1,4 @@
+import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -19,6 +20,7 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x80,0x84,0x85"
 		fingerprint mfr: "0086", prod: "0001", model: "0026", deviceJoinName: "Aeon Panic Button"
@@ -131,6 +133,9 @@ def updated() {
 }
 
 def initialize() {
+	// Arrival sensors only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
+
 	def zwMap = getZwaveInfo()
 	def buttons = 4 // Default for Key Fob
 

devicetypes/smartthings/aeon-minimote.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-minimote.src/README.md

@@ -0,0 +1,33 @@
+# Aeon Minimote
+
+Cloud Execution
+
+Works with: 
+
+* [Aeotec Minimote](http://aeotec.com/small-z-wave-remote-control)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents device has commands
+* **Button** - represents a device with one or more buttons
+* **Holdable Button** - represents a device with one or more holdable buttons
+* **Configuration** - allows for configuration of devices
+* **Sensor** - detects sensor events
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Aeon Minimote is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the Aeotec Minimote from SmartThings can be found in the following link:
+* [Aeotec Minimote Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202087904-Aeotec-Minimote)

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -1,3 +1,4 @@
+import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -18,6 +19,7 @@ metadata {
 		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B", outClusters: "0x26,0x2B"
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B,0x85,0x84", outClusters: "0x26" // old style with numbered buttons
@@ -119,5 +121,7 @@ def updated() {
 }
 
 def initialize() {
+	// Arrival sensors only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/fibaro-rgbw-controller.src/fibaro-rgbw-controller.groovy

@@ -300,15 +300,21 @@ def setColor(value) {
         value.hex = "#${hex(value.red)}${hex(value.green)}${hex(value.blue)}"
     }
 
-	sendEvent(name: "hue", value: value.hue, displayed: false)
-	sendEvent(name: "saturation", value: value.saturation, displayed: false)
-	sendEvent(name: "color", value: value.hex, displayed: false)
-	if (value.level) {
-		sendEvent(name: "level", value: value.level)
-	}
-	if (value.switch) {
-		sendEvent(name: "switch", value: value.switch)
-	}
+    if(value.hue) {
+        sendEvent(name: "hue", value: value.hue, displayed: false)
+    }
+    if(value.saturation) {
+        sendEvent(name: "saturation", value: value.saturation, displayed: false)
+    }
+    if(value.hex?.trim()) {
+        sendEvent(name: "color", value: value.hex, displayed: false)
+    }
+    if (value.level) {
+        sendEvent(name: "level", value: value.level)
+    }
+    if (value.switch?.trim()) {
+        sendEvent(name: "switch", value: value.switch)
+    }
 
     sendRGB(value.rh, value.gh, value.bh)
 }