MSA-2027: Removed setpoint value tile since the tile does not support text on multiple lines anymore

build.gradle

@@ -9,7 +9,7 @@ apply plugin: 'smartthings-slack'
 
 buildscript {
     dependencies {
-        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.12"
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.11"
     }
     repositories {
         mavenLocal()
@@ -19,7 +19,7 @@ buildscript {
                 username smartThingsArtifactoryUserName
                 password smartThingsArtifactoryPassword
             }
-            url "https://smartthings.jfrog.io/smartthings/libs-release-local"
+            url "https://artifactory.smartthings.com/libs-release-local"
         }
     }
 }
@@ -32,7 +32,7 @@ repositories {
             username smartThingsArtifactoryUserName
             password smartThingsArtifactoryPassword
         }
-        url "https://smartthings.jfrog.io/smartthings/libs-release-local"
+        url "https://artifactory.smartthings.com/libs-release-local"
     }
 }
 
@@ -51,10 +51,10 @@ sourceSets {
 
 dependencies {
     devicetypesCompile 'org.codehaus.groovy:groovy-all:2.4.7'
-    devicetypesCompile 'smartthings:appengine-z-wave:0.1.3'
+    devicetypesCompile 'smartthings:appengine-z-wave:0.1.2'
-    devicetypesCompile 'smartthings:appengine-zigbee:0.1.12'
+    devicetypesCompile 'smartthings:appengine-zigbee:0.1.11'
     smartappsCompile 'org.codehaus.groovy:groovy-all:2.4.7'
-    smartappsCompile 'smartthings:appengine-common:0.1.9'
+    smartappsCompile 'smartthings:appengine-common:0.1.8'
     smartappsCompile 'org.codehaus.groovy.modules.http-builder:http-builder:0.7.1'
     smartappsCompile 'org.grails:grails-web:2.3.11'
     smartappsCompile 'org.json:json:20140107'
@@ -74,19 +74,19 @@ slackSendMessage {
     String username
     switch (branch) {
         case 'master':
-            username = 'DEV'
+            username = 'Hickory'
             iconUrl = wolverine
             color = '#35D0F2'
             messageText = 'Began deployment of _SmartThingsPublic[master]_ branch to the _Dev_ environments.'
             break
         case 'staging':
-            username = 'STG'
+            username = 'Dickory'
             iconUrl = beach
             color = '#FFDE20'
             messageText = 'Began deployment of _SmartThingsPublic[staging]_ branch to the _Staging_ environments.'
             break
         case 'production':
-            username = 'PRD'
+            username = 'Dock'
             iconUrl = drinks
             color = '#FF1D23'
             messageText = 'Began deployment of _SmartThingsPublic[production]_ branch to the _Prod_ environments.'

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Bose SoundTouch
  *

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -35,8 +35,8 @@ metadata {
 
 	// tile definitions
 	tiles(scale: 2) {
-		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4, canChangeIcon: true){
+		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
 				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
 				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
 				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
@@ -48,16 +48,14 @@ metadata {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
-		main "contact"
+		main "valve"
-		details(["contact","refresh"])
+		details(["valve","refresh"])
 	}
 }
 
 def installed(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
-	response(refresh())
 }
 
 def updated(){
@@ -87,17 +85,11 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def open() {
-	delayBetween([
+	zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00).format()
-		zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00).format(),
-		zwave.switchBinaryV1.switchBinaryGet().format()
-	], 500)
 }
 
 def close() {
-	delayBetween([
+	zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF).format()
-		zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF).format(),
-		zwave.switchBinaryV1.switchBinaryGet().format()
-	], 500)
 }
 
 /**
@@ -113,6 +105,6 @@ def refresh() {
 
 def createEventWithDebug(eventMap) {
 	def event = createEvent(eventMap)
-	log.debug "Event created with ${event?.name}:${event?.value} - ${event?.descriptionText}"
+	log.debug "Event created with ${event?.descriptionText}"
 	return event
 }

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue Bloom
  *

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue Bridge
  *

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue Bulb
  *

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue Lux Bulb
  *

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue White Ambiance Bulb
  *

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Copyright 2015 SmartThings
  *

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Copyright 2015 SmartThings
  *

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Copyright 2015 SmartThings
  *

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -66,29 +66,22 @@ def parse(String description) {
         else {
             sendEvent(event)
         }
-    } else {
+    }
-        def descMap = zigbee.parseDescriptionAsMap(description)
+    else {
-        if (descMap && descMap.clusterInt == 0x0006 && descMap.commandInt == 0x07) {
+        def cluster = zigbee.parse(description)
-            if (descMap.data[0] == "00") {
+
+        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+            if (cluster.data[0] == 0x00) {
                 log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
                 sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            } else {
+            }
+            else {
                 log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
             }
-        } else if (device.getDataValue("manufacturer") == "sengled" && descMap && descMap.clusterInt == 0x0008 && descMap.attrInt == 0x0000) {
+        }
-            // This is being done because the sengled element touch/classic incorrectly uses the value 0xFF for the max level.
+        else {
-            // Per the ZCL spec for the UINT8 data type 0xFF is an invalid value, and 0xFE should be the max.  Here we
-            // manually handle the invalid attribute value since it will be ignored by getEvent as an invalid value.
-            // We also set the level of the bulb to 0xFE so future level reports will be 0xFE until it is changed by
-            // something else.
-            if (descMap.value.toUpperCase() == "FF") {
-                descMap.value = "FE"
-            }
-            sendHubCommand(zigbee.command(zigbee.LEVEL_CONTROL_CLUSTER, 0x00, "FE0000").collect { new physicalgraph.device.HubAction(it) }, 0)
-            sendEvent(zigbee.getEventFromAttrData(descMap.clusterInt, descMap.attrInt, descMap.encoding, descMap.value))
-        } else {
             log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${descMap}"
+            log.debug "${cluster}"
         }
     }
 }

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -38,8 +38,8 @@ metadata {
     }
 
     tiles(scale: 2) {
-        multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4, canChangeIcon: true){
+        multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+            tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
                 attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
                 attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
                 attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
@@ -58,8 +58,8 @@ metadata {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 
-        main(["contact"])
+        main(["valve"])
-        details(["contact", "battery", "refresh"])
+        details(["valve", "battery", "refresh"])
     }
 }
 

devicetypes/stelpro/stelpro-ki-thermostat.src/stelpro-ki-thermostat.groovy

@@ -0,0 +1,537 @@
+/**
+ *  Copyright 2017 Stelpro
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Stelpro Ki Thermostat
+ *
+ *  Author: Stelpro
+ *
+ *  Date: 2017-06-08
+ */
+
+preferences {
+    input("zipcode", "text", title: "ZipCode (Outdoor Temperature)", description: "[Do not use space](Blank = No Forecast)")
+    input("heatdetails", "enum", title: "Do you want a detailed operating state notification?", options: ["No", "Yes"], defaultValue: "No", required: false, displayDuringSetup: true)
+}
+
+metadata {
+    definition (name: "Stelpro Ki Thermostat", namespace: "stelpro", author: "Stelpro") {
+        capability "Thermostat"
+        capability "Temperature Measurement"
+        capability "Actuator"
+        capability "Polling"
+        capability "Refresh"
+        capability "Sensor"
+        capability "Configuration"
+
+        attribute "outsideTemp", "number"
+
+        command "switchMode"
+        command "quickSetHeat"
+        command "quickSetOutTemp"
+        command "increaseHeatSetpoint"
+        command "decreaseHeatSetpoint"
+        command "setCustomThermostatMode"
+        command "eco"
+        command "applyNow"
+
+        fingerprint deviceId: "0x0806", inClusters: "0x5E,0x86,0x72,0x40,0x43,0x31,0x85,0x59,0x5A,0x73,0x20,0x42"
+    }
+
+    // simulator metadata
+    simulator {
+        //Add test code here
+    }
+
+    tiles(scale : 2) {
+		multiAttributeTile(name:"thermostatMulti", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("temp", label:'${currentValue}')
+                attributeState("high", label:'HIGH')
+            	attributeState("low", label:'LOW')
+            	attributeState("--", label:'--')
+			}
+            tileAttribute("device.heatingSetpoint", key: "VALUE_CONTROL") {
+				attributeState("VALUE_UP", action: "increaseHeatSetpoint")
+                attributeState("VALUE_DOWN", action: "decreaseHeatSetpoint")
+			}
+			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+				attributeState("idle", backgroundColor:"#44b621")
+				attributeState("heating", backgroundColor:"#ffa81e")
+			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+				attributeState("off", label:'Off')
+				attributeState("comfort", label:'Comfort')
+				attributeState("eco", label:'Eco')
+			}
+            tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT")
+            {
+            	attributeState("heatingSetpoint", label:'${currentValue}')
+            }
+		}
+        standardTile("mode", "device.thermostatMode", width: 2, height: 2) {
+        	state "off", label:'${name}', action:"switchMode", nextState:"to_comfort", icon:"st.thermostat.off"
+			state "comfort", label:'${name}', action:"switchMode", nextState:"to_eco", icon:"http://cdn.device-icons.smartthings.com/Home/home29-icn@2x.png"
+			state "eco", label:'${name}', action:"switchMode", nextState:"...", icon:"http://cdn.device-icons.smartthings.com/Outdoor/outdoor3-icn@2x.png"
+			state "to_comfort", label: "comfort", action:"switchMode", nextState:"to_eco"
+			state "to_eco", label: "eco", action:"switchMode", nextState:"..."
+			state "...", label: "...", action:"heat", nextState:"comfort"
+        }
+        standardTile("refresh", "device.refresh", decoration: "flat", width: 2, height: 2) {
+            state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        main ("thermostatMulti")
+        details(["thermostatMulti", "mode", "refresh"])
+    }
+}
+
+def parse(String description)
+{
+	if (description == "updated")
+    	return []
+
+    def unitScale = getTemperatureScale()
+    //Class, version
+    def map = createEvent(zwaveEvent(zwave.parse(description, [0x40:2, 0x43:2, 0x31:3, 0x42:1])))
+    if (!map) {
+        return null
+    }
+
+    def result = [map]
+    if (map.name in ["heatingSetpoint","thermostatMode"]) {
+        def map2 = [
+                name: "thermostatSetpoint",
+                unit: getTemperatureScale()
+        ]
+        if (map.name == "thermostatMode") {
+            state.lastTriedMode = map.value
+        }
+        else {
+            def mode = device.latestValue("thermostatMode")
+            log.info "THERMOSTAT, latest mode = ${mode}"
+            if (map.name == "heatingSetpoint") {
+                map2.value = map.value
+                map2.unit = map.unit
+            }
+        }
+        if (map2.value != null) {
+            log.debug "THERMOSTAT, adding setpoint event: $map"
+            result << createEvent(map2)
+        }
+    }
+    log.debug "Parse returned $result"
+    result
+}
+
+// Event Generation
+def zwaveEvent(physicalgraph.zwave.commands.thermostatsetpointv2.ThermostatSetpointReport cmd)
+{
+    def cmdScale = cmd.scale == 1 ? "F" : "C"
+    def temp;
+    float tempfloat;
+    def map = [:]
+    if (cmd.scaledValue >= 327)
+    {
+    	map.value = "--"
+    }
+    else
+    {
+        temp = convertTemperatureIfNeeded(cmd.scaledValue, cmdScale, cmd.precision)
+        tempfloat = (Math.round(temp.toFloat() * 2)) / 2
+        map.value = tempfloat
+    }
+    map.unit = getTemperatureScale()
+    map.displayed = false
+    switch (cmd.setpointType) {
+        case 1:
+            map.name = "heatingSetpoint"
+            break;
+        default:
+            return [:]
+    }
+    // So we can respond with same format
+    state.size = cmd.size
+    state.scale = cmd.scale
+    state.precision = cmd.precision
+    sendEvent(name:"heatingSetpoint", value:map.value)
+    map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv3.SensorMultilevelReport cmd)
+{
+    def temp;
+    float tempfloat;
+    def format;
+    def map = [:]
+    if (cmd.sensorType == 1) {
+        map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmd.scale == 1 ? "F" : "C", cmd.precision)
+        map.unit = getTemperatureScale()
+        map.name = "temperature"
+
+        temp = map.value
+        if (temp == "32765")		//0x7FFD
+        {
+            map.value = "low"
+        }
+        else if (temp == "32767")	//0x7FFF
+        {
+            map.value = "high"
+        }
+        else if (temp == "-32768")	//0x8000
+        {
+            map.value = "--"
+        }
+        else
+        {
+    		tempfloat = (Math.round(temp.toFloat() * 2)) / 2
+    		map.value = tempfloat
+        }
+
+    } else if (cmd.sensorType == 5) {
+        map.value = cmd.scaledSensorValue
+        map.unit = "%"
+        map.name = "humidity"
+    }
+    sendEvent(name:"temperature", value:map.value)
+    map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.thermostatoperatingstatev1.ThermostatOperatingStateReport cmd)
+{
+    def map = [:]
+    switch (cmd.operatingState) {
+        case physicalgraph.zwave.commands.thermostatoperatingstatev1.ThermostatOperatingStateReport.OPERATING_STATE_IDLE:
+        map.value = "idle"
+        break
+        case physicalgraph.zwave.commands.thermostatoperatingstatev1.ThermostatOperatingStateReport.OPERATING_STATE_HEATING:
+        map.value = "heating"
+        break
+    }
+    map.name = "thermostatOperatingState"
+    
+    if (settings.heatdetails == "No") {
+    	map.displayed = false
+    }
+    
+    map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport cmd) {
+    def map = [:]
+    switch (cmd.mode) {
+        case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_HEAT:
+            map.value = "comfort"
+            break
+        case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_OFF:
+            map.value = "off"
+            break
+        default:
+            map.value = "eco"
+            break
+    }
+    map.name = "thermostatMode"
+    sendEvent(name:"thermostatMode", value:map.value)
+    map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.associationv2.AssociationReport cmd) {
+	delayBetween([
+    	zwave.associationV1.associationRemove(groupingIdentifier:1, nodeId:0).format(),
+        zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId]).format(),
+        poll()
+    ], 2300)
+}
+
+
+def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeSupportedReport cmd) {
+    log.debug "Zwave event received: $cmd"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+    log.debug "Zwave event received: $cmd"
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+    log.warn "Unexpected zwave command $cmd"
+}
+
+// Command Implementations
+def poll() {
+    def weather
+
+    // If there is a zipcode defined, weather forecast will be sent. Otherwise, no weather forecast.
+    if (settings.zipcode) {
+        log.debug "ZipCode: ${settings.zipcode}"
+        weather = getWeatherFeature( "conditions", settings.zipcode )
+
+        // Check if the variable is populated, otherwise return.
+        if (!weather) {
+            log.debug( "Something went wrong, no data found." )
+            return false
+        }
+
+        // Set the tiles
+        def locationScale = getTemperatureScale()
+        def tempToSend
+        if (locationScale == "C")
+        {
+            log.debug( "Outdoor Temperature: ${weather.current_observation.temp_c}ºC" )
+            sendEvent( name: 'outsideTemp', value: weather.current_observation.temp_c )
+            tempToSend = weather.current_observation.temp_c
+        }
+        else
+        {
+            log.debug( "Outdoor Temperature: ${weather.current_observation.temp_f}ºF" )
+            sendEvent( name: 'outsideTemp', value: weather.current_observation.temp_f )
+            tempToSend = weather.current_observation.temp_f
+        }
+
+
+        delayBetween([
+                quickSetOutTemp(tempToSend),
+                zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format(),
+                zwave.thermostatModeV2.thermostatModeGet().format(),
+                zwave.thermostatSetpointV2.thermostatSetpointGet(setpointType: 1).format(),
+                zwave.sensorMultilevelV3.sensorMultilevelGet().format(), // current temperature
+                sendEvent( name: 'change', value: 0 )
+        ], 100)
+    } else {
+        delayBetween([
+                zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format(),
+                zwave.thermostatModeV2.thermostatModeGet().format(),
+                zwave.thermostatSetpointV2.thermostatSetpointGet(setpointType: 1).format(),
+                zwave.sensorMultilevelV3.sensorMultilevelGet().format(), // current temperature
+                sendEvent( name: 'change', value: 0 )
+        ], 100)
+    }
+}
+
+def refresh() {
+	poll()
+}
+
+def configure() {
+	poll()
+}
+
+def applyNow() {
+    float currentHeatSetpoint = device.currentValue("heatingSetpoint")
+    def deviceScale
+    def locationScale = getTemperatureScale()
+
+    sendEvent( name: 'change', value: 0 )
+    log.debug("currentHeatSetpoint $currentHeatSetpoint")
+    if (locationScale == "C")
+    {
+        deviceScale = 0
+    }
+    else
+    {
+        deviceScale = 1
+    }
+
+    delayBetween([
+            zwave.thermostatSetpointV2.thermostatSetpointSet(setpointType: 1, scale: deviceScale, precision: state.precision, scaledValue: currentHeatSetpoint).format(),
+            poll()
+    ], 1000)
+}
+
+def quickSetHeat(degrees) {
+    setHeatingSetpoint(degrees, 0)
+}
+
+def setHeatingSetpoint(degrees, delay = 0) {
+    sendEvent(name:"heatingSetpoint", value:degrees)
+    applyNow()
+}
+
+def quickSetOutTemp(degrees) {
+    setOutdoorTemperature(degrees, 0)
+}
+
+def setOutdoorTemperature(degrees, delay = 0) {
+    setOutdoorTemperature(degrees.toDouble(), delay)
+}
+
+def setOutdoorTemperature(Double degrees, Integer delay = 0) {
+    def deviceScale
+    def locationScale = getTemperatureScale()
+    def p = (state.precision == null) ? 1 : state.precision
+
+    if (locationScale == "C")
+    {
+        deviceScale = 0
+    }
+    else
+    {
+        deviceScale = 1
+    }
+    log.info "setOutdoorTemperature: ${degrees}"
+    zwave.sensorMultilevelV3.sensorMultilevelReport(sensorType: 1, scale: deviceScale, precision: p,  scaledSensorValue: degrees).format()
+}
+
+def increaseHeatSetpoint()
+{
+	def currentMode = device.currentState("thermostatMode")?.value
+    if (currentMode != "off")
+    {
+        float currentSetpoint = device.currentValue("heatingSetpoint")
+        def locationScale = getTemperatureScale()
+        float maxSetpoint
+        float step
+
+        if (locationScale == "C")
+        {
+            maxSetpoint = 30;
+            step = 0.5
+        }
+        else
+        {
+            maxSetpoint = 86
+            step = 1
+        }
+
+        if (currentSetpoint < maxSetpoint)
+        {
+            currentSetpoint = currentSetpoint + step
+            quickSetHeat(currentSetpoint)
+        }
+    }
+}
+
+def decreaseHeatSetpoint()
+{
+	def currentMode = device.currentState("thermostatMode")?.value
+    if (currentMode != "off")
+    {
+        float currentSetpoint = device.currentValue("heatingSetpoint")
+        def locationScale = getTemperatureScale()
+        float minSetpoint
+        float step
+
+        if (locationScale == "C")
+        {
+            minSetpoint = 5;
+            step = 0.5
+        }
+        else
+        {
+            minSetpoint = 41
+            step = 1
+        }
+
+        if (currentSetpoint > minSetpoint)
+        {
+            currentSetpoint = currentSetpoint - step
+            quickSetHeat(currentSetpoint)
+        }
+    }
+}
+
+def switchMode() {
+    def currentMode = device.currentState("thermostatMode")?.value
+    def lastTriedMode = state.lastTriedMode ?: currentMode ?: "comfort"
+    def supportedModes = getDataByName("supportedModes")
+    def modeOrder = modes()
+    def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
+    def nextMode = next(lastTriedMode)
+    if (supportedModes?.contains(currentMode)) {
+        while (!supportedModes.contains(nextMode) && nextMode != "comfort") {
+            nextMode = next(nextMode)
+        }
+    }
+    state.lastTriedMode = nextMode
+    delayBetween([
+            zwave.thermostatModeV2.thermostatModeSet(mode: modeMap[nextMode]).format(),
+            poll()
+    ], 1000)
+}
+
+def modes() {
+    ["comfort", "eco", "off"]
+}
+
+def getModeMap() { [
+		"off": 0,
+        "comfort": 1,
+        "eco": 11,
+]}
+
+def getDataByName(String name) {
+    state[name] ?: device.getDataValue(name)
+}
+
+def setCoolingSetpoint(coolingSetpoint) {
+    log.trace "${device.displayName} does not support cool setpoint"
+}
+
+def off() {
+    log.trace "off mode applied"
+	delayBetween([
+		zwave.thermostatModeV2.thermostatModeSet(mode: 0).format(),
+		poll()
+	], 1000)
+}
+
+def heat() {
+	log.trace "heat mode applied"
+	delayBetween([
+		zwave.thermostatModeV2.thermostatModeSet(mode: 1).format(),
+		poll()
+	], 1000)
+}
+
+def eco() {
+	log.trace "eco mode applied"
+	delayBetween([
+		zwave.thermostatModeV2.thermostatModeSet(mode: 11).format(),
+		poll()
+	], 1000)
+}
+
+def auto() {
+    log.trace "${device.displayName} does not support auto mode"
+}
+
+def emergencyHeat() {
+    log.trace "${device.displayName} does not support emergency heat mode"
+}
+
+def cool() {
+    log.trace "${device.displayName} does not support cool mode"
+}
+
+def setCustomThermostatMode(mode) {
+   setThermostatMode(mode)
+}
+
+def setThermostatMode(String value) {
+	delayBetween([
+		zwave.thermostatModeV2.thermostatModeSet(mode: modeMap[value]).format(),
+		poll()
+	], 1000)
+}
+
+def fanOn() {
+    log.trace "${device.displayName} does not support fan on"
+}
+
+def fanAuto() {
+    log.trace "${device.displayName} does not support fan auto"
+}
+
+def fanCirculate() {
+    log.trace "${device.displayName} does not support fan circulate"
+}
+
+def setThermostatFanMode() {
+    log.trace "${device.displayName} does not support fan mode"
+}

devicetypes/stelpro/stelpro-ki-zigbee-thermostat.src/stelpro-ki-zigbee-thermostat.groovy

@@ -0,0 +1,651 @@
+/**
+ *  Copyright 2017 Stelpro
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Stelpro Ki ZigBee Thermostat
+ *
+ *  Author: Stelpro
+ *
+ *  Date: 2017-06-08
+ */
+ 
+preferences {
+	section {
+ 			input("unitformat", "enum", title: "What unit format do you want your thermostat to display temperature?", options: ["Celsius", "Fahrenheit"], defaultValue: "Celsius", required: false, displayDuringSetup: false)
+            input("lock", "enum", title: "Do you want to lock your thermostat's physical keypad?", options: ["No", "Yes"], defaultValue: "No", required: false, displayDuringSetup: false)
+            input("heatdetails", "enum", title: "Do you want a detailed operating state notification?", options: ["No", "Yes"], defaultValue: "No", required: false, displayDuringSetup: true)
+    		input("zipcode", "text", title: "ZipCode (Outdoor Temperature)", description: "[Do not use space](Blank = No Forecast)")
+    }
+}
+
+metadata {
+	definition (name: "Stelpro Ki ZigBee Thermostat", namespace: "Stelpro", author: "Stelpro") {
+        capability "Thermostat"
+        capability "Temperature Measurement"
+        capability "Actuator"
+        capability "Polling"
+        capability "Refresh"
+        capability "Sensor"
+        capability "Configuration"
+        
+		command "switchMode"
+        command "quickSetHeat"
+        command "quickSetOutTemp"
+        command "increaseHeatSetpoint"
+        command "decreaseHeatSetpoint"
+        command "parameterSetting"
+
+		fingerprint profileId: "0104", endpointId: "19", inClusters: " 0000,0003,0201,0204", outClusters: "0402"
+	}
+
+	// simulator metadata
+	simulator { }
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"thermostatMulti", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("temp", label:'${currentValue}')
+                attributeState("high", label:'HIGH')
+            	attributeState("low", label:'LOW')
+            	attributeState("--", label:'--')
+			}
+            tileAttribute("device.heatingSetpoint", key: "VALUE_CONTROL") {
+				attributeState("VALUE_UP", action: "increaseHeatSetpoint")
+                attributeState("VALUE_DOWN", action: "decreaseHeatSetpoint")
+			}
+			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+				attributeState("idle", backgroundColor:"#44b621")
+				attributeState("heating", backgroundColor:"#ffa81e")
+			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+				attributeState("off", label:'Off')
+				attributeState("comfort", label:'Comfort')
+				attributeState("eco", label:'Eco')
+			}
+            tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT")
+            {
+            	attributeState("heatingSetpoint", label:'${currentValue}')
+            }
+		}
+        standardTile("mode", "device.thermostatMode", width: 2, height: 2) {
+        	state "off", label:'Off', action:"switchMode", nextState:"comfort", icon:"st.thermostat.off"
+			state "comfort", label:'Comfort', action:"switchMode", nextState:"eco", icon:"http://cdn.device-icons.smartthings.com/Home/home29-icn@2x.png"
+			state "eco", label:'Eco', action:"switchMode", nextState:"off", icon:"http://cdn.device-icons.smartthings.com/Outdoor/outdoor3-icn@2x.png"
+        }
+        standardTile("refresh", "device.refresh", decoration: "flat", width: 2, height: 2) {
+            state "default", action:"poll", icon:"st.secondary.refresh"
+        }
+        standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+
+        main ("thermostatMulti")
+        details(["thermostatMulti", "mode", "refresh", "configure"])
+    }
+}
+
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parse description $description"
+	def map = [:]
+	if (description?.startsWith("read attr -")) {
+		def descMap = parseDescriptionAsMap(description)
+		log.debug "Desc Map: $descMap"
+		if (descMap.cluster == "0201" && descMap.attrId == "0000")
+        {
+			log.debug "TEMP"
+			map.name = "temperature"
+			map.value = getTemperature(descMap.value)
+            if (descMap.value == "7ffd")		//0x7FFD
+            {
+                map.value = "low"
+            }
+            else if (descMap.value == "7fff")	//0x7FFF
+            {
+                map.value = "high"
+            }
+            else if (descMap.value == "8000")	//0x8000
+            {
+                map.value = "--"
+            }
+            sendEvent(name:"temperature", value:map.value)
+		}
+        else if (descMap.cluster == "0201" && descMap.attrId == "0012")
+        {
+			log.debug "HEATING SETPOINT"
+			map.name = "heatingSetpoint"
+			map.value = getTemperature(descMap.value)
+            if (descMap.value == "8000")		//0x8000
+            {
+                map.value = "--"
+            }
+            sendEvent(name:"heatingSetpoint", value:map.value)
+		}
+        else if (descMap.cluster == "0201" && descMap.attrId == "001c")
+        {
+        	if (descMap.value.size() == 8)
+            {
+				log.debug "MODE"
+				map.name = "thermostatMode"
+				map.value = getModeMap()[descMap.value]
+				sendEvent(name:"thermostatMode", value:map.value)
+            }
+            else if (descMap.value.size() == 10)
+            {
+            	log.debug "MODE & SETPOINT MODE"
+                def twoModesAttributes = descMap.value[0..-9]
+                map.name = "thermostatMode"
+				map.value = getModeMap()[twoModesAttributes]
+				sendEvent(name:"thermostatMode", value:map.value)
+            }
+		}
+        else if (descMap.cluster == "0201" && descMap.attrId == "401c")
+        {
+            log.debug "SETPOINT MODE"
+            log.debug "descMap.value $descMap.value"
+            map.name = "thermostatMode"
+            map.value = getModeMap()[descMap.value]
+            sendEvent(name:"thermostatMode", value:map.value)
+		}
+        else if (descMap.cluster == "0201" && descMap.attrId == "0008")
+        {
+        	log.debug "HEAT DEMAND"
+            map.name = "thermostatOperatingState"
+            map.value = getModeMap()[descMap.value]
+            if (map.value == "off")
+            {
+            	map.value = "idle"
+            }
+            else
+            {
+            	map.value = "heating"
+            }
+            sendEvent(name:"thermostatOperatingState", value:map.value)
+            if (settings.heatdetails == "No")
+            {
+    			map.displayed = false
+    		}
+        }
+	}
+
+	def result = null
+	if (map) {
+		result = createEvent(map)
+	}
+	log.debug "Parse returned $map"
+	return result
+}
+
+def parseDescriptionAsMap(description) {
+	(description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+}
+
+def getModeMap() { [
+	"00":"off",
+    "04":"comfort",
+	"05":"eco"
+]}
+
+def getFanModeMap() { [
+	"04":"fanOn",
+	"05":"fanAuto"
+]}
+
+def poll() {
+    def weather
+    // If there is a zipcode defined, weather forecast will be sent. Otherwise, no weather forecast.
+    if (settings.zipcode) {
+        log.debug "ZipCode: ${settings.zipcode}"
+        weather = getWeatherFeature( "conditions", settings.zipcode )
+
+        // Check if the variable is populated, otherwise return.
+        if (!weather) {
+            log.debug( "Something went wrong, no data found." )
+            return false
+        }
+
+        // Set the tiles
+        def locationScale = getTemperatureScale()
+        def tempToSend
+        log.debug( "Outdoor Temperature: ${weather.current_observation.temp_c}ºC" )
+        sendEvent( name: 'outsideTemp', value: weather.current_observation.temp_c )
+        tempToSend = weather.current_observation.temp_c
+
+		delayBetween([
+                quickSetOutTemp(tempToSend),
+                zigbee.readAttribute(0x201, 0x0000),	//Read Local Temperature
+                zigbee.readAttribute(0x201, 0x0008),	//Read PI Heating State
+    			zigbee.readAttribute(0x201, 0x0012),	//Read Heat Setpoint
+                zigbee.readAttribute(0x201, 0x001C),	//Read System Mode
+                my_readAttribute(0x201, 0x401C, ["mfgCode": "0x1185"]),	//Read Manufacturer Specific Setpoint Mode
+                zigbee.readAttribute(0x204, 0x0000),	//Read Temperature Display Mode
+                zigbee.readAttribute(0x204, 0x0001),	//Read Keypad Lockout
+                sendEvent( name: 'change', value: 0 )
+        ], 200)
+    } else {
+        delayBetween([
+        		zigbee.readAttribute(0x201, 0x0000),	//Read Local Temperature
+                zigbee.readAttribute(0x201, 0x0008),	//Read PI Heating State
+    			zigbee.readAttribute(0x201, 0x0012),	//Read Heat Setpoint
+                zigbee.readAttribute(0x201, 0x001C),	//Read System Mode
+                my_readAttribute(0x201, 0x401C, ["mfgCode": "0x1185"]),	//Read Manufacturer Specific Setpoint Mode
+                zigbee.readAttribute(0x204, 0x0000),	//Read Temperature Display Mode
+                zigbee.readAttribute(0x204, 0x0001),	//Read Keypad Lockout
+                sendEvent( name: 'change', value: 0 )
+        ], 200)
+    }
+}
+
+def getTemperature(value) {
+	if (value != null) {
+    	log.debug("value $value")
+		def celsius = Integer.parseInt(value, 16) / 100
+		if (getTemperatureScale() == "C") {
+			return celsius
+		} else {
+			return Math.round(celsiusToFahrenheit(celsius))
+		}
+	}
+}
+
+def quickSetHeat(degrees) {
+    sendEvent( name: 'change', value: 1 )
+    setHeatingSetpoint(degrees)
+}
+
+def setHeatingSetpoint(degrees) {
+	if (degrees != null) {
+		def temperatureScale = getTemperatureScale()
+		def degreesInteger = Math.round(degrees)
+        float tempfloat;
+	    tempfloat = (Math.round(degrees.toFloat() * 2)) / 2
+
+		log.debug "setHeatingSetpoint({$tempfloat} ${temperatureScale})"
+		sendEvent("name": "heatingSetpoint", "value": tempfloat)
+        def celsius = (getTemperatureScale() == "C") ? tempfloat : (fahrenheitToCelsius(tempfloat) as Float).round(2)
+        delayBetween([
+        	"st wattr 0x${device.deviceNetworkId} 0x19 0x201 0x12 0x29 {" + hex(celsius * 100) + "}",
+        	zigbee.readAttribute(0x201, 0x12),	//Read Heat Setpoint
+    	], 100)
+	}
+}
+
+def setCoolingSetpoint(degrees) {
+	if (degrees != null) {
+		def degreesInteger = Math.round(degrees)
+		log.debug "setCoolingSetpoint({$degreesInteger} ${temperatureScale})"
+		sendEvent("name": "coolingSetpoint", "value": degreesInteger)
+		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
+		"st wattr 0x${device.deviceNetworkId} 0x19 0x201 0x11 0x29 {" + hex(celsius * 100) + "}"
+	}
+}
+
+def quickSetOutTemp(degrees) {
+    setOutdoorTemperature(degrees, 0)
+}
+
+def setOutdoorTemperature(degrees, delay = 0) {
+    setOutdoorTemperature(degrees.toDouble(), delay)
+}
+
+def setOutdoorTemperature(Double degrees, Integer delay = 0) {
+    def deviceScale
+    def locationScale = getTemperatureScale()
+    def p = (state.precision == null) ? 1 : state.precision
+    Integer tempToSend
+    def tempToSendInString
+
+    if (locationScale == "C")
+    {
+        deviceScale = 0
+    }
+    else
+    {
+        deviceScale = 1
+    }
+
+    if (degrees < 0)
+    {
+    	tempToSend = -degrees*100 - 65536
+    	tempToSend = -tempToSend
+    }
+    else
+    {
+    	tempToSend = (degrees*100)
+    }
+
+    tempToSendInString = zigbee.convertToHexString(tempToSend, 4)
+    my_writeAttribute(0x201, 0x4001, 0x29, tempToSendInString, ["mfgCode": "0x1185"])
+}
+
+def increaseHeatSetpoint()
+{
+    def currentMode = device.currentState("thermostatMode")?.value
+    if (currentMode != "off")
+    {
+		float currentSetpoint = device.currentValue("heatingSetpoint")
+		def locationScale = getTemperatureScale()
+    	float maxSetpoint
+    	float step
+
+    	if (locationScale == "C")
+    	{
+        	maxSetpoint = 30;
+        	step = 0.5
+    	}
+    	else
+    	{
+        	maxSetpoint = 86
+        	step = 1
+    	}
+
+        if (currentSetpoint < maxSetpoint)
+        {
+            currentSetpoint = currentSetpoint + step
+            quickSetHeat(currentSetpoint)
+        }
+    }
+}
+
+def decreaseHeatSetpoint()
+{
+    def currentMode = device.currentState("thermostatMode")?.value
+    if (currentMode != "off")
+    {
+        float currentSetpoint = device.currentValue("heatingSetpoint")
+        def locationScale = getTemperatureScale()
+        float minSetpoint
+        float step
+
+        if (locationScale == "C")
+        {
+            minSetpoint = 5;
+            step = 0.5
+        }
+        else
+        {
+            minSetpoint = 41
+            step = 1
+        }
+
+    	if (currentSetpoint > minSetpoint)
+    	{
+        	currentSetpoint = currentSetpoint - step
+        	quickSetHeat(currentSetpoint)
+    	}
+    }
+}
+
+def modes() {
+	["comfort", "eco", "off"]
+}
+
+def switchMode() {
+    def currentMode = device.currentState("thermostatMode")?.value
+    def lastTriedMode = state.lastTriedMode ?: currentMode ?: "comfort"
+    def modeOrder = modes()
+    def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
+	def nextMode = next(currentMode)
+    def modeNumber;
+    Integer setpointModeNumber;
+    def modeToSendInString;
+
+    if (nextMode == "comfort")
+    {
+    	modeNumber = 04
+        setpointModeNumber = 04
+    }
+    else if (nextMode == "eco")
+    {
+    	modeNumber = 04
+        setpointModeNumber = 05
+    }
+    else
+    {
+    	modeNumber = 00
+        setpointModeNumber = 00
+    }
+    if (supportedModes?.contains(currentMode)) {
+        while (!supportedModes.contains(nextMode) && nextMode != "comfort") {
+            nextMode = next(nextMode)
+        }
+    }
+    state.lastTriedMode = nextMode
+	modeToSendInString = zigbee.convertToHexString(setpointModeNumber, 2)
+    delayBetween([
+    		"st wattr 0x${device.deviceNetworkId} 0x19 0x201 0x001C 0x30 {$modeNumber}",
+            my_writeAttribute(0x201, 0x401C, 0x30, modeToSendInString, ["mfgCode": "0x1185"]),
+            poll()
+    ], 1000)
+}
+
+def setThermostatMode() {
+	log.debug "switching thermostatMode"
+	def currentMode = device.currentState("thermostatMode")?.value
+	def modeOrder = modes()
+	def index = modeOrder.indexOf(currentMode)
+	def next = index >= 0 && index < modeOrder.size() - 1 ? modeOrder[index + 1] : modeOrder[0]
+	log.debug "switching mode from $currentMode to $next"
+	"$next"()
+}
+
+def setThermostatFanMode() {
+	log.debug "Switching fan mode"
+	def currentFanMode = device.currentState("thermostatFanMode")?.value
+	log.debug "switching fan from current mode: $currentFanMode"
+	def returnCommand
+
+	switch (currentFanMode) {
+		case "fanAuto":
+			returnCommand = fanOn()
+			break
+		case "fanOn":
+			returnCommand = fanAuto()
+			break
+	}
+	if(!currentFanMode) { returnCommand = fanAuto() }
+	returnCommand
+}
+
+def setThermostatMode(String value) {
+	log.debug "setThermostatMode({$value})"
+	"$value"()
+}
+
+def setThermostatFanMode(String value) {
+	log.debug "setThermostatFanMode({$value})"
+	"$value"()
+}
+
+def off() {
+	log.debug "off"
+	sendEvent("name":"thermostatMode", "value":"off")
+	"st wattr 0x${device.deviceNetworkId} 0x19 0x201 0x1C 0x30 {00}"
+}
+
+def cool() {
+	log.debug "cool"
+	sendEvent("name":"thermostatMode", "value":"cool")
+	"st wattr 0x${device.deviceNetworkId} 0x19 0x201 0x1C 0x30 {03}"
+}
+
+def heat() {
+	log.debug "heat"
+	sendEvent("name":"thermostatMode", "value":"heat")
+	"st wattr 0x${device.deviceNetworkId} 0x19 0x201 0x1C 0x30 {04}"
+}
+
+def emergencyHeat() {
+	log.debug "emergencyHeat"
+	sendEvent("name":"thermostatMode", "value":"emergency heat")
+	"st wattr 0x${device.deviceNetworkId} 0x19 0x201 0x1C 0x30 {05}"
+}
+
+def on() {
+	fanOn()
+}
+
+def fanOn() {
+	log.debug "fanOn"
+	sendEvent("name":"thermostatFanMode", "value":"fanOn")
+	"st wattr 0x${device.deviceNetworkId} 0x19 0x202 0 0x30 {04}"
+}
+
+def auto() {
+	fanAuto()
+}
+
+def fanAuto() {
+	log.debug "fanAuto"
+	sendEvent("name":"thermostatFanMode", "value":"fanAuto")
+	"st wattr 0x${device.deviceNetworkId} 1 0x202 0 0x30 {05}"
+}
+
+def configure() {
+	log.debug "binding to Thermostat cluster"
+	delayBetween([
+        "zdo bind 0x${device.deviceNetworkId} 1 0x19 0x201 {${device.zigbeeId}} {}",
+        //Cluster ID (0x0201 = Thermostat Cluster), Attribute ID, Data Type, Payload (Min report, Max report, On change trigger)
+        zigbee.configureReporting(0x0201, 0x0000, 0x29, 10, 60, 50), 	//Attribute ID 0x0000 = local temperature, Data Type: S16BIT
+    	zigbee.configureReporting(0x0201, 0x0012, 0x29, 1, 0, 50),  	//Attribute ID 0x0012 = occupied heat setpoint, Data Type: S16BIT
+        zigbee.configureReporting(0x0201, 0x001C, 0x30, 1, 0, 1),   	//Attribute ID 0x001C = system mode, Data Type: 8 bits enum
+        zigbee.configureReporting(0x0201, 0x401C, 0x30, 1, 0, 1),   	//Attribute ID 0x401C = manufacturer specific setpoint mode, Data Type: 8 bits enum
+        zigbee.configureReporting(0x0201, 0x0008, 0x20, 300, 900, 5),   //Attribute ID 0x0008 = pi heating demand, Data Type: U8BIT
+        
+        //Cluster ID (0x0204 = Thermostat Ui Conf Cluster), Attribute ID, Data Type, Payload (Min report, Max report, On change trigger)
+        zigbee.configureReporting(0x0204, 0x0000, 0x30, 1, 0, 1),   //Attribute ID 0x0000 = temperature display mode, Data Type: 8 bits enum
+    	zigbee.configureReporting(0x0204, 0x0001, 0x30, 1, 0, 1),   //Attribute ID 0x0001 = keypad lockout, Data Type: 8 bits enum
+        
+        //Read the configured variables
+        zigbee.readAttribute(0x201, 0x0000),	//Read Local Temperature
+    	zigbee.readAttribute(0x201, 0x0012),	//Read Heat Setpoint
+        zigbee.readAttribute(0x201, 0x001C),	//Read System Mode
+        my_readAttribute(0x201, 0x401C, ["mfgCode": "0x1185"]),	//Read Manufacturer Specific Setpoint Mode
+        zigbee.readAttribute(0x201, 0x0008),	//Read PI Heating State
+        zigbee.readAttribute(0x204, 0x0000),	//Read Temperature Display Mode
+    	zigbee.readAttribute(0x204, 0x0001),	//Read Keypad Lockout
+	], 200)
+}
+
+def updated() {
+	log.debug "updated called"
+    response(parameterSetting())
+}
+
+def parameterSetting() {
+	def format = null
+    def lockmode = null
+    def valid_format = 0
+    def valid_lock = 0
+
+    log.info "unitformat : $settings.unitformat"
+    if (settings.unitformat == "Celsius") {
+        format = 0x00
+        valid_format = 1
+    }
+    else if (settings.unitformat == "Fahrenheit") {
+        format = 0x01
+        valid_format = 1
+    }
+
+    log.info "lock : $settings.lock"
+    if (settings.lock == "Yes") {
+        lockmode = 0x01
+        valid_lock = 1
+    }
+    else if (settings.lock == "No") {
+        lockmode = 0x00
+        valid_lock = 1
+    }
+    if ((valid_format == 1) && (valid_lock == 1))
+    {
+    	log.info "both valid"
+        delayBetween([
+            zigbee.writeAttribute(0x204, 0x00, 0x30, format),	//Write Unit Format Mode
+            zigbee.writeAttribute(0x204, 0x01, 0x30, lockmode),	//Write Lock Mode
+            poll(),
+        ], 200)
+    }
+    else if (valid_format == 1)
+    {
+    	log.info "format valid"
+        delayBetween([
+            zigbee.writeAttribute(0x204, 0x00, 0x30, format),	//Write Unit Format Mode
+            poll(),
+        ], 200)
+    }
+	else if (valid_lock == 1)
+    {
+    	log.info "lock valid"
+        delayBetween([
+            zigbee.writeAttribute(0x204, 0x01, 0x30, lockmode),	//Write Lock Mode
+            poll(),
+        ], 200)
+    }
+    else
+    {
+    	log.info "nothing valid"
+    }
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private getEndpointId() {
+    new BigInteger(device.endpointId, 16).toString()
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}
+
+def my_readAttribute(cluster, attributeId, Map additional=null)
+{
+    if (additional?.get("mfgCode")) {
+        [ "zcl mfg-code ${additional['mfgCode']}", "delay 200",
+          "zcl global read ${cluster} ${attributeId}", "delay 200",
+          "send 0x${device.deviceNetworkId} 1 ${endpointId}" ] 
+    } else {
+        zigbee.readAttribute(cluster, attributeId)
+    }
+}
+
+def my_writeAttribute(cluster, attributeId, dataType, value, Map additional=null)
+{
+	value = swapEndianHex(value)
+    if (additional ?.get("mfgCode")) {
+        [ "zcl mfg-code ${additional['mfgCode']}", "delay 200",
+          "zcl global write ${cluster} ${attributeId} ${dataType} {${value}}", "delay 200",
+          "send 0x${device.deviceNetworkId} 1 ${endpointId}" ]
+    } else {
+        zigbee.writeAttribute(cluster, attributeId, dataType, value)
+    }
+}
+

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -195,10 +195,7 @@ def registerDeviceChange() {
 				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
 			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)) {
-				// state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
+				state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
-				// For now, we will only have one subscription endpoint per device
-				state.deviceSubscriptionMap.remove(deviceId)
-				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
 			}
 

smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Bose SoundTouch (Connect)
  *

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue Service Manager
  *

smartapps/smartthings/wemo-connect.src/wemo-connect.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Copyright 2015 SmartThings
  *