Merge pull request #2153 from SmartThingsCommunity/staging

Rolling up staging to production

devicetypes/smartthings/aeon-key-fob.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-key-fob.src/README.md

@@ -0,0 +1,34 @@
+# Aeon Labs Key Fob
+
+Cloud Execution
+
+Works with:
+
+* [Aeon Labs Key Fob](http://aeotec.com/z-wave-key-fob-remote-control)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents device has commands
+* **Button** - represents a device with one or more buttons
+* **Holdable Button** - represents a device with one or more holdable buttons
+* **Configuration** - allows for configuration of devices
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Aeon Key Fob is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the Aeon Labs Key Fob from SmartThings can be found in the following link:
+* [Aeotec Key Fob Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294120-Aeon-Labs-Key-Fob)

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -1,3 +1,4 @@
+import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -19,6 +20,7 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x80,0x84,0x85"
 		fingerprint mfr: "0086", prod: "0001", model: "0026", deviceJoinName: "Aeon Panic Button"
@@ -131,6 +133,9 @@ def updated() {
 }
 
 def initialize() {
+	// Arrival sensors only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
+
 	def zwMap = getZwaveInfo()
 	def buttons = 4 // Default for Key Fob
 

devicetypes/smartthings/aeon-minimote.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-minimote.src/README.md

@@ -0,0 +1,33 @@
+# Aeon Minimote
+
+Cloud Execution
+
+Works with: 
+
+* [Aeotec Minimote](http://aeotec.com/small-z-wave-remote-control)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents device has commands
+* **Button** - represents a device with one or more buttons
+* **Holdable Button** - represents a device with one or more holdable buttons
+* **Configuration** - allows for configuration of devices
+* **Sensor** - detects sensor events
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Aeon Minimote is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the Aeotec Minimote from SmartThings can be found in the following link:
+* [Aeotec Minimote Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202087904-Aeotec-Minimote)

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -1,3 +1,4 @@
+import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -18,6 +19,7 @@ metadata {
 		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B", outClusters: "0x26,0x2B"
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B,0x85,0x84", outClusters: "0x26" // old style with numbered buttons
@@ -119,5 +121,7 @@ def updated() {
 }
 
 def initialize() {
+	// Arrival sensors only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -70,7 +70,7 @@ metadata {
 			state "heat", action:"switchMode",  nextState: "updating", icon: "st.thermostat.heat"
 			state "cool", action:"switchMode",  nextState: "updating", icon: "st.thermostat.cool"
 			state "auto", action:"switchMode",  nextState: "updating", icon: "st.thermostat.auto"
-			state "emergency heat", action:"switchMode", icon: "st.thermostat.emergency-heat" // emergency heat = auxHeatOnly
+			state "auxheatonly", action:"switchMode", icon: "st.thermostat.emergency-heat"
 			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
@@ -156,47 +156,49 @@ void poll() {
 def generateEvent(Map results) {
 	log.debug "parsing data $results"
 	if(results) {
-		results.each { name, value ->
 
 			def linkText = getLinkText(device)
-			def isChange = false
-			def isDisplayed = true
+		def supportedThermostatModes = ["off"]
+		def thermostatMode = null
+
+		results.each { name, value ->
 			def event = [name: name, linkText: linkText, descriptionText: getThermostatDescriptionText(name, value, linkText),
 						 handlerName: name]
 
 			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint" ) {
 				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
-				isChange = isTemperatureStateChange(device, name, value.toString())
-				isDisplayed = isChange
-				event << [value: sendValue, unit: temperatureScale, isStateChange: isChange, displayed: isDisplayed]
+				event << [value: sendValue, unit: temperatureScale]
 			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
 				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
 				event << [value: sendValue, unit: temperatureScale, displayed: false]
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
-				isChange = isStateChange(device, name, value.toString())
-				event << [value: value.toString(), isStateChange: isChange, displayed: false]
+				if (value == true) {
+					supportedThermostatModes << ((name == "auxHeatMode") ? "auxheatonly" : name - "Mode")
+				}
+				return // as we don't want to send this event here, proceed to next name/value pair
 			}  else if (name=="thermostatFanMode"){
-				isChange = isStateChange(device, name, value.toString())
-				event << [value: value.toString(), isStateChange: isChange, displayed: false]
+				sendEvent(name: "supportedThermostatFanModes", value: fanModes(), displayed: false)
+				event << [value: value.toString(), data:[supportedThermostatFanModes: fanModes()]]
 			}  else if (name=="humidity") {
-				isChange = isStateChange(device, name, value.toString())
-				event << [value: value.toString(), isStateChange: isChange, displayed: false, unit: "%"]
+				event << [value: value.toString(), displayed: false, unit: "%"]
 			} else if (name == "deviceAlive") {
-				isChange = isStateChange(device, name, value.toString())
-				event['isStateChange'] = isChange
 				event['displayed'] = false
 			} else if (name == "thermostatMode") {
-				def mode = value.toString()
-				mode = (mode == "auxHeatOnly") ? "emergency heat" : mode
-				isChange = isStateChange(device, name, mode)
-				event << [value: mode, isStateChange: isChange, displayed: isDisplayed]
+				thermostatMode = value.toLowerCase()
+				return // as we don't want to send this event here, proceed to next name/value pair
 			} else {
-				isChange = isStateChange(device, name, value.toString())
-				isDisplayed = isChange
-				event << [value: value.toString(), isStateChange: isChange, displayed: isDisplayed]
+				event << [value: value.toString()]
 			}
 			sendEvent(event)
 		}
+		if (state.supportedThermostatModes != supportedThermostatModes) {
+			state.supportedThermostatModes = supportedThermostatModes
+			sendEvent(name: "supportedThermostatModes", value: supportedThermostatModes, displayed: false)
+		}
+		if (thermostatMode) {
+			sendEvent(name: "thermostatMode", value: thermostatMode, data:[supportedThermostatModes:state.supportedThermostatModes], linkText: linkText,
+					descriptionText: getThermostatDescriptionText("thermostatMode", thermostatMode, linkText), handlerName: "thermostatMode")
+		}
 		generateSetpointEvent ()
 		generateStatusEvent ()
 	}
@@ -322,15 +324,7 @@ void resumeProgram() {
 }
 
 def modes() {
-	if (state.modes) {
-		log.debug "Modes = ${state.modes}"
-		return state.modes
-	}
-	else {
-		state.modes = parent.availableModes(this)
-		log.debug "Modes = ${state.modes}"
-		return state.modes
-	}
+	return state.supportedThermostatModes
 }
 
 def fanModes() {
@@ -413,11 +407,13 @@ def setThermostatFanMode(String mode) {
 }
 
 def generateModeEvent(mode) {
-	sendEvent(name: "thermostatMode", value: mode, descriptionText: "$device.displayName is in ${mode} mode", displayed: true)
+	sendEvent(name: "thermostatMode", value: mode, data:[supportedThermostatModes: state.supportedThermostatModes],
+			descriptionText: "$device.displayName is in ${mode} mode")
 }
 
 def generateFanModeEvent(fanMode) {
-	sendEvent(name: "thermostatFanMode", value: fanMode, descriptionText: "$device.displayName fan is in ${fanMode} mode", displayed: true)
+	sendEvent(name: "thermostatFanMode", value: fanMode, data:[supportedThermostatFanModes: fanModes()],
+			descriptionText: "$device.displayName fan is in ${fanMode} mode")
 }
 
 def generateOperatingStateEvent(operatingState) {
@@ -453,14 +449,14 @@ def heat() {
 }
 
 def emergencyHeat() {
-	auxHeatOnly()
+	auxheatonly()
 }
 
-def auxHeatOnly() {
-	log.debug "auxHeatOnly = emergency heat"
+def auxheatonly() {
+	log.debug "auxheatonly()"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
 	if (parent.setMode ("auxHeatOnly", deviceId))
-		generateModeEvent("emergency heat") // emergency heat = auxHeatOnly
+		generateModeEvent("auxheatonly")
 	else {
 		log.debug "Error setting new mode."
 		def currentMode = device.currentState("thermostatMode")?.value
@@ -593,7 +589,7 @@ def generateSetpointEvent() {
 	} else if (mode == "off") {
 		sendEvent("name":"thermostatSetpoint", "value":averageSetpoint, "unit":location.temperatureScale)
 		sendEvent("name":"displayThermostatSetpoint", "value":"Off", displayed: false)
-	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
+	} else if (mode == "auxheatonly") {
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
 		sendEvent("name":"displayThermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale, displayed: false)
 	}
@@ -632,7 +628,7 @@ void raiseSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
-		if ((mode == "heat" || mode == "emergency heat") && targetvalue > maxHeatingSetpoint) { // emergency heat = auxHeatOnly
+		if ((mode == "heat" || mode == "auxheatonly") && targetvalue > maxHeatingSetpoint) {
 			targetvalue = maxHeatingSetpoint
 		} else if (mode == "cool" && targetvalue > maxCoolingSetpoint) {
 			targetvalue = maxCoolingSetpoint
@@ -678,7 +674,7 @@ void lowerSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
-		if ((mode == "heat" || mode == "emergency heat") && targetvalue < minHeatingSetpoint) { // emergency heat = auxHeatOnly
+		if ((mode == "heat" || mode == "auxheatonly") && targetvalue < minHeatingSetpoint) {
 			targetvalue = minHeatingSetpoint
 		} else if (mode == "cool" && targetvalue < minCoolingSetpoint) {
 			targetvalue = minCoolingSetpoint
@@ -719,7 +715,7 @@ void alterSetpoint(temp) {
 		}
 
 		//step1: check thermostatMode, enforce limits before sending request to cloud
-		if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
+		if (mode == "heat" || mode == "auxheatonly"){
 			if (temp.value > coolingSetpoint){
 				targetHeatingSetpoint = temp.value
 				targetCoolingSetpoint = temp.value
@@ -754,7 +750,7 @@ void alterSetpoint(temp) {
 			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
 		} else {
 			log.error "Error alterSetpoint()"
-			if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
+			if (mode == "heat" || mode == "auxheatonly"){
 				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 				sendEvent("name": "displayThermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 			} else if (mode == "cool") {
@@ -783,7 +779,7 @@ def generateStatusEvent() {
 	log.debug "Cooling set point = ${coolingSetpoint}"
 	log.debug "HVAC Mode = ${mode}"
 
-	if (mode == "heat") {
+	if (mode == "heat" || mode == "auxheatonly") {
 		if (temperature >= heatingSetpoint) {
 			statusText = "Right Now: Idle"
 		} else {
@@ -806,8 +802,6 @@ def generateStatusEvent() {
 		}
 	} else if (mode == "off") {
 		statusText = "Right Now: Off"
-	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
-		statusText = "Emergency Heat"
 	} else {
 		statusText = "?"
 	}

devicetypes/smartthings/fibaro-rgbw-controller.src/fibaro-rgbw-controller.groovy

@@ -300,15 +300,21 @@ def setColor(value) {
         value.hex = "#${hex(value.red)}${hex(value.green)}${hex(value.blue)}"
     }
 
-	sendEvent(name: "hue", value: value.hue, displayed: false)
-	sendEvent(name: "saturation", value: value.saturation, displayed: false)
-	sendEvent(name: "color", value: value.hex, displayed: false)
-	if (value.level) {
-		sendEvent(name: "level", value: value.level)
-	}
-	if (value.switch) {
-		sendEvent(name: "switch", value: value.switch)
-	}
+    if(value.hue) {
+        sendEvent(name: "hue", value: value.hue, displayed: false)
+    }
+    if(value.saturation) {
+        sendEvent(name: "saturation", value: value.saturation, displayed: false)
+    }
+    if(value.hex?.trim()) {
+        sendEvent(name: "color", value: value.hex, displayed: false)
+    }
+    if (value.level) {
+        sendEvent(name: "level", value: value.level)
+    }
+    if (value.switch?.trim()) {
+        sendEvent(name: "switch", value: value.switch)
+    }
 
     sendRGB(value.rh, value.gh, value.bh)
 }

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -23,7 +23,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -105,6 +105,8 @@ def parse(String description) {
 				} else {
 					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 				}
+			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
+				map = translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			}
 		}
 	} else if (map.name == "temperature") {
@@ -129,6 +131,10 @@ def parse(String description) {
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
+	translateZoneStatus(zs)
+}
+
+private Map translateZoneStatus(ZoneStatus zs) {
 	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
 }
 
@@ -197,7 +203,8 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
+			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
+			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS)
 
 	return refreshCmds + zigbee.enrollResponse()
 }

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -111,6 +111,8 @@ def parse(String description) {
 				def value = descMap.value.endsWith("01") ? "active" : "inactive"
 				log.debug "Doing a read attr motion event"
 				map = getMotionResult(value)
+			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
+				map = translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			}
 		}
 	} else if (map.name == "temperature") {
@@ -135,6 +137,10 @@ def parse(String description) {
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
+	translateZoneStatus(zs)
+}
+
+private Map translateZoneStatus(ZoneStatus zs) {
 	// Some sensor models that use this DTH use alarm1 and some use alarm2 to signify motion
 	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
@@ -200,7 +206,8 @@ def refresh() {
 	log.debug "refresh called"
 
 	def refreshCmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000)
+			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
+			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS)
 
 	return refreshCmds + zigbee.enrollResponse()
 }

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -134,8 +134,9 @@ def parse(String description) {
 				} else {
 					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 				}
+			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
+				maps += translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			} else {
-
 				maps += handleAcceleration(descMap)
 			}
 		}
@@ -229,6 +230,11 @@ private List<Map> parseAxis(List<Map> attrData) {
 
 private List<Map> parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
+
+	translateZoneStatus(zs)
+}
+
+private List<Map> translateZoneStatus(ZoneStatus zs) {
 	List<Map> results = []
 
 	if (garageSensor != "Yes") {
@@ -313,7 +319,7 @@ def refresh() {
 	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
 			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
 			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode]) +
-			zigbee.enrollResponse()
+			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS) + zigbee.enrollResponse()
 
 	return refreshCmds
 }

devicetypes/smartthings/zigbee-button.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-button.src/README.md

@@ -0,0 +1,42 @@
+# ZigBee Button
+
+Cloud Execution
+
+Works with: 
+
+* [OSRAM LIGHTIFY Dimming Switch](https://support.smartthings.com/hc/en-us/articles/115000236823-SYLVANIA-Dimming-Switch)
+* [Iris Smart Button](https://support.smartthings.com/hc/en-us/articles/115000190186-Iris-Smart-Button)
+* [Iris KeyFob](https://support.smartthings.com/hc/en-us/articles/217409686-Iris-Smart-Fob)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - It represents that a device has commands.
+* **Battery** - It defines that the device has a battery
+* **Button** - It defines that a device has one or more buttons
+* **Holdable Button** - It defines that a device has one or more holdable buttons
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - it represents that a Device has attributes.
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+ZigBee Button is marked offline only in the case when Hub is offline.
+
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+It may also happen that you need to reset the device.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [OSRAM LIGHTIFY Dimming Switch Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/115000236823-SYLVANIA-Dimming-Switch)
+* [Iris Smart Button Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/115000190186-Iris-Smart-Button)
+* [Iris KeyFob Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/217409686-Iris-Smart-Fob)

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -13,6 +13,8 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+
+import groovy.json.JsonOutput
 import physicalgraph.zigbee.zcl.DataType
 
 metadata {
@@ -24,6 +26,7 @@ metadata {
         capability "Configuration"
         capability "Refresh"
         capability "Sensor"
+        capability "Health Check"
 
         command "enrollResponse"
 
@@ -249,6 +252,8 @@ def updated() {
 }
 
 def initialize() {
+    // Arrival sensors only goes OFFLINE when Hub is off
+    sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
     if ((device.getDataValue("manufacturer") == "OSRAM") && (device.getDataValue("model") == "LIGHTIFY Dimming Switch")) {
         sendEvent(name: "numberOfButtons", value: 2)
     }

devicetypes/smartthings/zwave-water-valve.src/zwave-water-valve.groovy

@@ -58,6 +58,7 @@ metadata {
 def installed() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	response(refresh())
 }
 
 def updated() {

smartapps/smartthings/button-controller.src/button-controller.groovy

@@ -27,10 +27,9 @@ definition(
 
 preferences {
 	page(name: "selectButton")
-	page(name: "configureButton1")
-	page(name: "configureButton2")
-	page(name: "configureButton3")
-	page(name: "configureButton4")
+	for (def i=1; i<=8; i++) {
+		page(name: "configureButton$i")
+	}
 
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -60,22 +59,45 @@ def selectButton() {
 	}
 }
 
+def createPage(pageNum) {
+	if ((state.numButton == pageNum) || (pageNum == 8))
+		state.installCondition = true
+	dynamicPage(name: "configureButton$pageNum", title: "Set up button $pageNum here",
+			nextPage: "configureButton${pageNum+1}", install: state.installCondition, uninstall: configured(), getButtonSections(pageNum))
+}
+
 def configureButton1() {
-	dynamicPage(name: "configureButton1", title: "Now let's decide how to use the first button",
-		nextPage: "configureButton2", uninstall: configured(), getButtonSections(1))
+	state.numButton = buttonDevice.currentState("numberOfButtons")?.longValue ?: 4
+	log.debug "state variable numButton: ${state.numButton}"
+	state.installCondition = false
+	createPage(1)
 }
 def configureButton2() {
-	dynamicPage(name: "configureButton2", title: "If you have a second button, set it up here",
-		nextPage: "configureButton3", uninstall: configured(), getButtonSections(2))
+	createPage(2)
 }
 
 def configureButton3() {
-	dynamicPage(name: "configureButton3", title: "If you have a third button, you can do even more here",
-		nextPage: "configureButton4", uninstall: configured(), getButtonSections(3))
+	createPage(3)
 }
+
 def configureButton4() {
-	dynamicPage(name: "configureButton4", title: "If you have a fourth button, you rule, and can set it up here",
-		install: true, uninstall: true, getButtonSections(4))
+	createPage(4)
+}
+
+def configureButton5() {
+	createPage(5)
+}
+
+def configureButton6() {
+	createPage(6)
+}
+
+def configureButton7() {
+	createPage(7)
+}
+
+def configureButton8() {
+	createPage(8)
 }
 
 def getButtonSections(buttonNumber) {