Merge pull request #2150 from SmartThingsCommunity/staging

Rolling down staging to master

devicetypes/plaidsystems/spruce-sensor.src/spruce-sensor.groovy

@@ -1,5 +1,5 @@
 /**
- *  Spruce Sensor -Pre-release V2 10/8/2015
+ *  Spruce Sensor -updated with SLP model number 5/2017
  *
  *  Copyright 2014 Plaid Systems
  *
@@ -14,25 +14,33 @@
  *
  -------10/20/2015 Updates--------
  -Fix/add battery reporting interval to update
- -remove polling and/or refresh(?)
+ -remove polling and/or refresh
+ 
+ -------5/2017 Updates--------
+ -Add fingerprints for SLP
+ -add device health, check every 60mins + 2mins
  */
+ 
 metadata {
-	definition (name: "Spruce Sensor", namespace: "plaidsystems", author: "NCauffman") {
+	definition (name: "Spruce Sensor", namespace: "plaidsystems", author: "Plaid Systems") {
 		
 		capability "Configuration"
 		capability "Battery"
         capability "Relative Humidity Measurement"
         capability "Temperature Measurement"
         capability "Sensor"
+        capability "Health Check"
         //capability "Polling"
 		
         attribute "maxHum", "string"
         attribute "minHum", "string"        
         
+        
         command "resetHumidity"
         command "refresh"
         
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-01"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-01", deviceJoinName: "Spruce Sensor"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-SLP1", deviceJoinName: "Spruce Sensor"
 	}
 
 	preferences {
@@ -293,6 +301,11 @@ def setConfig(){
     sendEvent(name: 'configuration',value: configInterval, descriptionText: "Configuration initialized")
 }
 
+def installed(){
+	//check every 1 hour + 2mins
+    sendEvent(name: "checkInterval", value: 1 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
+
 //when device preferences are changed
 def updated(){	
     log.debug "device updated"
@@ -303,6 +316,8 @@ def updated(){
             sendEvent(name: 'configuration',value: 0, descriptionText: "Settings changed and will update at next report. Measure interval set to ${interval} mins")
     	}
     }
+    //check every 1 hour + 2mins
+    sendEvent(name: "checkInterval", value: 1 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 }
 
 //poll
@@ -395,4 +410,4 @@ private byte[] reverseArray(byte[] array) {
         i++;
     }
     return array
-}
+}

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -105,6 +105,8 @@ def parse(String description) {
 				} else {
 					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 				}
+			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
+				map = translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			}
 		}
 	} else if (map.name == "temperature") {
@@ -129,6 +131,10 @@ def parse(String description) {
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
+	translateZoneStatus(zs)
+}
+
+private Map translateZoneStatus(ZoneStatus zs) {
 	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
 }
 
@@ -197,7 +203,8 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
+			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
+			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS)
 
 	return refreshCmds + zigbee.enrollResponse()
 }

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -111,6 +111,8 @@ def parse(String description) {
 				def value = descMap.value.endsWith("01") ? "active" : "inactive"
 				log.debug "Doing a read attr motion event"
 				map = getMotionResult(value)
+			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
+				map = translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			}
 		}
 	} else if (map.name == "temperature") {
@@ -135,6 +137,10 @@ def parse(String description) {
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
+	translateZoneStatus(zs)
+}
+
+private Map translateZoneStatus(ZoneStatus zs) {
 	// Some sensor models that use this DTH use alarm1 and some use alarm2 to signify motion
 	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
@@ -200,7 +206,8 @@ def refresh() {
 	log.debug "refresh called"
 
 	def refreshCmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000)
+			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
+			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS)
 
 	return refreshCmds + zigbee.enrollResponse()
 }

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -134,8 +134,9 @@ def parse(String description) {
 				} else {
 					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 				}
+			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
+				maps += translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			} else {
-
 				maps += handleAcceleration(descMap)
 			}
 		}
@@ -229,6 +230,11 @@ private List<Map> parseAxis(List<Map> attrData) {
 
 private List<Map> parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
+
+	translateZoneStatus(zs)
+}
+
+private List<Map> translateZoneStatus(ZoneStatus zs) {
 	List<Map> results = []
 
 	if (garageSensor != "Yes") {
@@ -313,7 +319,7 @@ def refresh() {
 	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
 			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
 			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode]) +
-			zigbee.enrollResponse()
+			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS) + zigbee.enrollResponse()
 
 	return refreshCmds
 }

smartapps/smartthings/button-controller.src/button-controller.groovy

@@ -27,10 +27,9 @@ definition(
 
 preferences {
 	page(name: "selectButton")
-	page(name: "configureButton1")
-	page(name: "configureButton2")
-	page(name: "configureButton3")
-	page(name: "configureButton4")
+	for (def i=1; i<=8; i++) {
+		page(name: "configureButton$i")
+	}
 
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -60,22 +59,45 @@ def selectButton() {
 	}
 }
 
+def createPage(pageNum) {
+	if ((state.numButton == pageNum) || (pageNum == 8))
+		state.installCondition = true
+	dynamicPage(name: "configureButton$pageNum", title: "Set up button $pageNum here",
+			nextPage: "configureButton${pageNum+1}", install: state.installCondition, uninstall: configured(), getButtonSections(pageNum))
+}
+
 def configureButton1() {
-	dynamicPage(name: "configureButton1", title: "Now let's decide how to use the first button",
-		nextPage: "configureButton2", uninstall: configured(), getButtonSections(1))
+	state.numButton = buttonDevice.currentState("numberOfButtons")?.longValue ?: 4
+	log.debug "state variable numButton: ${state.numButton}"
+	state.installCondition = false
+	createPage(1)
 }
 def configureButton2() {
-	dynamicPage(name: "configureButton2", title: "If you have a second button, set it up here",
-		nextPage: "configureButton3", uninstall: configured(), getButtonSections(2))
+	createPage(2)
 }
 
 def configureButton3() {
-	dynamicPage(name: "configureButton3", title: "If you have a third button, you can do even more here",
-		nextPage: "configureButton4", uninstall: configured(), getButtonSections(3))
+	createPage(3)
 }
+
 def configureButton4() {
-	dynamicPage(name: "configureButton4", title: "If you have a fourth button, you rule, and can set it up here",
-		install: true, uninstall: true, getButtonSections(4))
+	createPage(4)
+}
+
+def configureButton5() {
+	createPage(5)
+}
+
+def configureButton6() {
+	createPage(6)
+}
+
+def configureButton7() {
+	createPage(7)
+}
+
+def configureButton8() {
+	createPage(8)
 }
 
 def getButtonSections(buttonNumber) {

smartapps/smartthings/examples/every-element.src/every-element.groovy

@@ -202,7 +202,8 @@ def inputSelectionPage() {
 
         section("options variations") {
             paragraph "tap these elements and look at the differences when selecting an option"
-            input(type: "enum", name: "selectionSimple", title: "Simple options", description: "no separators in the selectable options", groupedOptions: addGroup(englishOptions + spanishOptions))
+            input(type: "enum", name: "selectionSimple", title: "Simple options", description: "no separators in the selectable options", options: ["Thing 1", "Thing 2", "(Complicated) Thing 3"])
+            input(type: "enum", name: "selectionSimpleGrouped", title: "Simple (Grouped) options", description: "no separators in the selectable options", groupedOptions: addGroup(englishOptions + spanishOptions))
             input(type: "enum", name: "selectionGrouped", title: "Grouped options", description: "separate groups of options with headers", groupedOptions: groupedOptions)
         }
 
@@ -214,15 +215,15 @@ def inputSelectionPage() {
 
         section("segmented") {
             paragraph "segmented should only work if there are either 2 or 3 options to choose from"
-            input(type: "enum", name: "selectionSegmented1", style: "segmented", title: "1 option", groupedOptions: addGroup(["One"]))
-            input(type: "enum", name: "selectionSegmented4", style: "segmented", title: "4 options", groupedOptions: addGroup(["One", "Two", "Three", "Four"]))
+            input(type: "enum", name: "selectionSegmented1", style: "segmented", title: "1 option", options: ["One"])
+            input(type: "enum", name: "selectionSegmented4", style: "segmented", title: "4 options", options: ["One", "Two", "Three", "Four"])
 
             paragraph "multiple and required will have no effect on segmented selection elements. There will always be exactly 1 option selected"
             input(type: "enum", name: "selectionSegmented2", style: "segmented", title: "2 options", options: ["One", "Two"])
             input(type: "enum", name: "selectionSegmented3", style: "segmented", title: "3 options", options: ["One", "Two", "Three"])
 
             paragraph "specifying defaultValue still works with segmented selection elements"
-            input(type: "enum", name: "selectionSegmentedWithDefault", title: "defaulted to 'two'", groupedOptions: addGroup(["One", "Two", "Three"]), defaultValue: "Two")
+            input(type: "enum", name: "selectionSegmentedWithDefault", style: "segmented", title: "defaulted to 'two'", options: ["One", "Two", "Three"], defaultValue: "Two")
         }
 
         section("required: true") {
@@ -231,6 +232,8 @@ def inputSelectionPage() {
 
         section("multiple: true") {
             input(type: "enum", name: "selectionMultiple", title: "This allows multiple selections", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true)
+            input(type: "enum", name: "selectionMultipleDefault1", title: "This allows multiple selections with a single default", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true, defaultValue: "an option")
+            input(type: "enum", name: "selectionMultipleDefault2", title: "This allows multiple selections with multiple defaults", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true, defaultValue: ["an option", "another option"])
         }
 
         section("with image") {

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -72,7 +72,7 @@ def authPage() {
 		log.debug "have LIFX access token"
 
 		def options = locationOptions() ?: []
-		def count = options.size()
+		def count = options.size().toString()
 
 		return dynamicPage(name:"Credentials", title:"", nextPage:"", install:true, uninstall: true) {
 			section("Select your location") {