MSA-787: Testing the system.

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -1,155 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-    definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
-        capability "Tone"
-        capability "Actuator"
-        capability "Presence Sensor"
-        capability "Sensor"
-        capability "Battery"
-        capability "Configuration"
-
-        fingerprint inClusters: "0000,0001,0003,000F,0020", outClusters: "0003,0019",
-                        manufacturer: "SmartThings", model: "tagv4", deviceJoinName: "Arrival Sensor"
-    }
-
-    preferences {
-        section {
-            image(name: 'educationalcontent', multiple: true, images: [
-                "http://cdn.device-gse.smartthings.com/Arrival/Arrival1.png",
-                "http://cdn.device-gse.smartthings.com/Arrival/Arrival2.png"
-                ])
-        }
-        section {
-            input "checkInterval", "enum", title: "Presence timeout (minutes)",
-                    defaultValue:"2", options: ["2", "3", "5"], displayDuringSetup: false
-        }
-    }
-
-    tiles {
-        standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-            state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
-            state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
-        }
-        standardTile("beep", "device.beep", decoration: "flat") {
-            state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"
-        }
-        valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
-            state "battery", label:'${currentValue}% battery', unit:""
-        }
-
-        main "presence"
-        details(["presence", "beep", "battery"])
-    }
-}
-
-def updated() {
-    startTimer()
-}
-
-def configure() {
-    def cmds = zigbee.configureReporting(0x0001, 0x0020, 0x20, 20, 20, 0x01)
-    log.debug "configure -- cmds: ${cmds}"
-    return cmds
-}
-
-def beep() {
-    log.debug "Sending Identify command to beep the sensor for 5 seconds"
-    return zigbee.command(0x0003, 0x00, "0500")
-}
-
-def parse(String description) {
-    state.lastCheckin = now()
-    handlePresenceEvent(true)
-
-    if (description?.startsWith('read attr -')) {
-        handleReportAttributeMessage(description)
-    }
-
-    return []
-}
-
-private handleReportAttributeMessage(String description) {
-    def descMap = zigbee.parseDescriptionAsMap(description)
-
-    if (descMap.clusterInt == 0x0001 && descMap.attrInt == 0x0020) {
-        handleBatteryEvent(Integer.parseInt(descMap.value, 16))
-    }
-}
-
-private handleBatteryEvent(rawValue) {
-    def linkText = getLinkText(device)
-
-    def eventMap = [
-        name: 'battery',
-        value: '--'
-    ]
-
-    def volts = rawValue / 10
-    if (volts > 0){
-        def minVolts = 2.0
-        def maxVolts = 2.8
-
-        if (volts < minVolts)
-            volts = minVolts
-        else if (volts > maxVolts)
-            volts = maxVolts
-        def pct = (volts - minVolts) / (maxVolts - minVolts)
-
-        eventMap.value = Math.round(pct * 100)
-        eventMap.descriptionText = "${linkText} battery was ${eventMap.value}%"
-    }
-
-    log.debug "Creating battery event: ${eventMap}"
-    sendEvent(eventMap)
-}
-
-private handlePresenceEvent(present) {
-    def wasPresent = device.currentState("presence")?.value == "present"
-    if (!wasPresent && present) {
-        log.debug "Sensor is present"
-        startTimer()
-    } else if (!present) {
-        log.debug "Sensor is not present"
-        stopTimer()
-    }
-    def linkText = getLinkText(device)
-    def eventMap = [
-        name: "presence",
-        value: present ? "present" : "not present",
-        linkText: linkText,
-        descriptionText: "${linkText} has ${present ? 'arrived' : 'left'}",
-    ]
-    log.debug "Creating presence event: ${eventMap}"
-    sendEvent(eventMap)
-}
-
-private startTimer() {
-    log.debug "Scheduling periodic timer"
-    schedule("0 * * * * ?", checkPresenceCallback)
-}
-
-private stopTimer() {
-    log.debug "Stopping periodic timer"
-    unschedule()
-}
-
-def checkPresenceCallback() {
-    def timeSinceLastCheckin = (now() - state.lastCheckin) / 1000
-    def theCheckInterval = (checkInterval ? checkInterval as int : 2) * 60
-    log.debug "Sensor checked in ${timeSinceLastCheckin} seconds ago"
-    if (timeSinceLastCheckin >= theCheckInterval) {
-        handlePresenceEvent(false)
-    }
-}

devicetypes/smartthings/testing/simulated-thermostat.src/simulated-thermostat.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2015 SmartThings
+ *  Copyright 2014 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -15,7 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Thermostat", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Thermostat"
-		capability "Relative Humidity Measurement"
 
 		command "tempUp"
 		command "tempDown"
@@ -23,40 +22,11 @@ metadata {
 		command "heatDown"
 		command "coolUp"
 		command "coolDown"
-		command "setTemperature", ["number"]
+        command "setTemperature", ["number"]
 	}
 
-	tiles(scale: 2) {
-		multiAttributeTile(name:"thermostatMulti", type:"thermostat", width:6, height:4) {
-			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
-				attributeState("default", action: "setTemperature")
-			}
-			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
-				attributeState("default", label:'${currentValue}%', unit:"%")
-			}
-			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
-				attributeState("idle", backgroundColor:"#44b621")
-				attributeState("heating", backgroundColor:"#ffa81e")
-				attributeState("cooling", backgroundColor:"#269bd2")
-			}
-			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
-				attributeState("off", label:'${name}')
-				attributeState("heat", label:'${name}')
-				attributeState("cool", label:'${name}')
-				attributeState("auto", label:'${name}')
-			}
-			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-		}
-
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+	tiles {
+		valueTile("temperature", "device.temperature", width: 1, height: 1) {
 			state("temperature", label:'${currentValue}', unit:"dF",
 				backgroundColors:[
 					[value: 31, color: "#153591"],
@@ -69,51 +39,51 @@ metadata {
 				]
 			)
 		}
-		standardTile("tempDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("tempDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'down', action:"tempDown"
 		}
-		standardTile("tempUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("tempUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'up', action:"tempUp"
 		}
 
-		valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		valueTile("heatingSetpoint", "device.heatingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "heat", label:'${currentValue} heat', unit: "F", backgroundColor:"#ffffff"
 		}
-		standardTile("heatDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("heatDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'down', action:"heatDown"
 		}
-		standardTile("heatUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("heatUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'up', action:"heatUp"
 		}
 
-		valueTile("coolingSetpoint", "device.coolingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		valueTile("coolingSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "cool", label:'${currentValue} cool', unit:"F", backgroundColor:"#ffffff"
 		}
-		standardTile("coolDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("coolDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'down', action:"coolDown"
 		}
-		standardTile("coolUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("coolUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'up', action:"coolUp"
 		}
 
-		standardTile("mode", "device.thermostatMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
 			state "off", label:'${name}', action:"thermostat.heat", backgroundColor:"#ffffff"
 			state "heat", label:'${name}', action:"thermostat.cool", backgroundColor:"#ffa81e"
 			state "cool", label:'${name}', action:"thermostat.auto", backgroundColor:"#269bd2"
 			state "auto", label:'${name}', action:"thermostat.off", backgroundColor:"#79b821"
 		}
-		standardTile("fanMode", "device.thermostatFanMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
 			state "fanAuto", label:'${name}', action:"thermostat.fanOn", backgroundColor:"#ffffff"
 			state "fanOn", label:'${name}', action:"thermostat.fanCirculate", backgroundColor:"#ffffff"
 			state "fanCirculate", label:'${name}', action:"thermostat.fanAuto", backgroundColor:"#ffffff"
 		}
-		standardTile("operatingState", "device.thermostatOperatingState", width: 2, height: 2) {
+		standardTile("operatingState", "device.thermostatOperatingState") {
 			state "idle", label:'${name}', backgroundColor:"#ffffff"
 			state "heating", label:'${name}', backgroundColor:"#ffa81e"
 			state "cooling", label:'${name}', backgroundColor:"#269bd2"
 		}
 
-		main("thermostatMulti")
+		main("temperature","operatingState")
 		details([
 			"temperature","tempDown","tempUp",
 			"mode", "fanMode", "operatingState",
@@ -131,7 +101,6 @@ def installed() {
 	sendEvent(name: "thermostatMode", value: "off")
 	sendEvent(name: "thermostatFanMode", value: "fanAuto")
 	sendEvent(name: "thermostatOperatingState", value: "idle")
-	sendEvent(name: "humidity", value: 53, unit: "%")
 }
 
 def parse(String description) {

smartapps/engietestcentersmartthings/engietestcentersmartthingssmartapp.src/engietestcentersmartthingssmartapp.groovy

@@ -0,0 +1,69 @@
+/**
+ *  EngieTestCenterSmartThingsSmartApp
+ *
+ *  Copyright 2016 Eric
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "EngieTestCenterSmartThingsSmartApp",
+    namespace: "EngieTestCenterSmartThings",
+    author: "Eric",
+    description: "Test",
+    category: "My Apps",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+//preferences {
+//	section("Title") {
+//		// TODO: put inputs here
+//	}
+//}
+preferences {
+    section("Turn on when motion detected:") {
+        input "themotion", "capability.motionSensor", required: true, title: "Where?"
+    }
+    section("Turn on when motion detected:") {
+        input "themotion2", "capability.motionSensor", required: true, title: "Where?"
+    }
+    section("Turn on this light") {
+        input "theswitch", "capability.switch", required: true
+    }
+}
+
+//required
+def installed() {
+	//Can settings be queried?
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	//Can settings be queried?
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+//See here for available capabilities - http://docs.smartthings.com/en/latest/capabilities-reference.html#capabilities-taxonomy 
+def initialize() {
+    subscribe(themotion, "motion.active", motionDetectedHandler)
+}
+
+//event handlers ---------------------------
+def motionDetectedHandler(evt) {
+    log.debug "motionDetectedHandler called: $evt"
+    theswitch.on()
+}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -258,8 +258,8 @@ def installed() {
 
 def updated() {
 	log.trace "Updated with settings: ${settings}"
+    unschedule()
 	unsubscribe() 
-    unschedule()    
 	initialize()
 }
 
@@ -325,7 +325,6 @@ def addBulbs() {
                     } else {
                         d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
                     }
-                    log.debug "created ${d.displayName} with id $dni"
                 } else {
                 	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
                 }
@@ -334,6 +333,8 @@ def addBulbs() {
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.hub, ["label":newHueBulb?.name])
 			}
+
+			log.debug "created ${d.displayName} with id $dni"
 			d.refresh()
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
@@ -774,4 +775,4 @@ private Boolean hasAllHubsOver(String desiredFirmware) {
 
 private List getRealHubFirmwareVersions() {
 	return location.hubs*.firmwareVersionString.findAll { it }
-}
+}