Merge pull request #1584 from SmartThingsCommunity/staging

Rolling down staging hotfix to master

README.md

@@ -1,10 +1,10 @@
-# SmartThings Public Github Repo
+# SmartThings Public GitHub Repo
 
 An official list of SmartApps and Device Types from SmartThings.
 
 Here are some links to help you get started coding right away:
 
-* [Github-specific Documentation](http://docs.smartthings.com/en/latest/tools-and-ide/github-integration.html)
+* [GitHub-specific Documentation](http://docs.smartthings.com/en/latest/tools-and-ide/github-integration.html)
 * [Full Documentation](http://docs.smartthings.com)
 * [IDE & Simulator](http://ide.smartthings.com)
 * [Community Forums](http://community.smartthings.com)

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -15,6 +15,7 @@ metadata {
 	definition (name: "Aeon Key Fob", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Button"
+		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
@@ -118,3 +119,16 @@ def configure() {
 	log.debug("Sending configuration: $cmd")
 	return cmd
 }
+
+
+def installed() {
+	initialize()
+}
+
+def updated() {
+	initialize()
+}
+
+def initialize() {
+	sendEvent(name: "numberOfButtons", value: 4)
+}

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -15,6 +15,7 @@ metadata {
 	definition (name: "Aeon Minimote", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Button"
+		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
 
@@ -107,3 +108,16 @@ def configure() {
 	log.debug("Sending configuration: $cmds")
 	return cmds
 }
+
+
+def installed() {
+	initialize()
+}
+
+def updated() {
+	initialize()
+}
+
+def initialize() {
+	sendEvent(name: "numberOfButtons", value: 4)
+}

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -27,7 +27,7 @@ metadata {
         capability "Switch"
         capability "Refresh"
         capability "Music Player"
-        capability "Polling"
+        capability "Health Check"
 
         /**
          * Define all commands, ie, if you have a custom action not
@@ -236,7 +236,33 @@ def parse(String event) {
  * @return action(s) to take or null
  */
 def installed() {
-    onAction("refresh")
+    // Notify health check about this device with timeout interval 12 minutes
+    sendEvent(name: "checkInterval", value: 12 * 60, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+    startPoll()
+}
+
+/**
+ * Called by health check if no events been generated in the last 12 minutes
+ * If device doesn't respond it will be marked offline (not available)
+ */
+def ping() {
+    TRACE("ping")
+    boseSendGetNowPlaying()
+}
+
+/**
+ * Schedule a 2 minute poll of the device to refresh the
+ * tiles so the user gets the correct information.
+ */
+def startPoll() {
+    TRACE("startPoll")
+    unschedule()
+    // Schedule 2 minute polling of speaker status (song average length is 3-4 minutes)
+    def sec = Math.round(Math.floor(Math.random() * 60))
+    //def cron = "$sec 0/5 * * * ?" // every 5 min
+    def cron = "$sec 0/2 * * * ?" // every 2 min
+    log.debug "schedule('$cron', boseSendGetNowPlaying)"
+    schedule(cron, boseSendGetNowPlaying)
 }
 
 /**
@@ -316,14 +342,6 @@ def onAction(String user, data=null) {
     return actions
 }
 
-/**
- * Called every so often (every 5 minutes actually) to refresh the
- * tiles so the user gets the correct information.
- */
-def poll() {
-    return boseRefreshNowPlaying()
-}
-
 /**
  * Joins this speaker into the everywhere zone
  */
@@ -837,6 +855,10 @@ def boseRefreshNowPlaying(delay=0) {
     return boseGET("/now_playing")
 }
 
+def boseSendGetNowPlaying() {
+    sendHubCommand(boseGET("/now_playing"))
+}
+
 /**
  * Requests the list of presets
  *
@@ -1014,4 +1036,8 @@ def boseGetDeviceID() {
  */
 def getDeviceIP() {
     return parent.resolveDNI2Address(device.deviceNetworkId)
+}
+
+def TRACE(text) {
+    log.trace "${text}"
 }

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -1,96 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *	CentraLite Dimmer
- *
- *	Author: SmartThings
- *	Date: 2013-12-04
- */
-//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
-metadata {
-	definition (name: "CentraLite Dimmer", namespace: "smartthings", author: "SmartThings") {
-		capability "Switch Level"
-		capability "Actuator"
-		capability "Switch"
-		capability "Power Meter"
-		capability "Configuration"
-		capability "Refresh"
-		capability "Sensor"
-
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-			tileAttribute ("power", key: "SECONDARY_CONTROL") {
-				attributeState "power", label:'${currentValue} W'
-			}
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		main "switch"
-		details(["switch", "refresh"])
-	}
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	log.debug "description is $description"
-
-	def event = zigbee.getEvent(description)
-	if (event) {
-		log.info event
-		if (event.name == "power") {
-			if (device.getDataValue("manufacturer") != "OSRAM") {       //OSRAM devices do not reliably update power
-				event.value = (event.value as Integer) / 10             //TODO: The divisor value needs to be set as part of configuration
-				sendEvent(event)
-			}
-		}
-		else {
-			sendEvent(event)
-		}
-	}
-	else {
-		log.warn "DID NOT PARSE MESSAGE for description : $description"
-		log.debug zigbee.parseDescriptionAsMap(description)
-	}
-}
-
-def off() {
-	zigbee.off()
-}
-
-def on() {
-	zigbee.on()
-}
-
-def setLevel(value) {
-	zigbee.setLevel(value)
-}
-
-def refresh() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
-}
-
-def configure() {
-	log.debug "Configuring Reporting and Bindings."
-	refresh()
-}

devicetypes/smartthings/cooper-rf9500.src/cooper-rf9500.groovy

@@ -16,7 +16,7 @@ metadata {
 		capability "Switch"
 		capability "Switch Level"
 		capability "Button"
-        capability "Actuator"
+		capability "Actuator"
 
 		//fingerprint deviceId: "0x1200", inClusters: "0x77 0x86 0x75 0x73 0x85 0x72 0xEF", outClusters: "0x26"
 	}
@@ -74,20 +74,20 @@ def off() {
 }
 
 def levelup() {
-	def curlevel = device.currentValue('level') as Integer 
+	def curlevel = device.currentValue('level') as Integer
 	if (curlevel <= 90)
-    	setLevel(curlevel + 10);     
+    	setLevel(curlevel + 10);
 }
 
 def leveldown() {
-	def curlevel = device.currentValue('level') as Integer 
+	def curlevel = device.currentValue('level') as Integer
 	if (curlevel >= 10)
-    	setLevel(curlevel - 10)    
+    	setLevel(curlevel - 10)
 }
 
 def setLevel(value) {
 	log.trace "setLevel($value)"
-	sendEvent(name: "level", value: value) 
+	sendEvent(name: "level", value: value)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
@@ -106,11 +106,11 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelS
 	if (cmd.upDown == true) {
 		Integer buttonid = 2
         leveldown()
-		checkbuttonEvent(buttonid)		
+		checkbuttonEvent(buttonid)
     } else if (cmd.upDown == false) {
 		Integer buttonid = 3
         levelup()
-		checkbuttonEvent(buttonid)       
+		checkbuttonEvent(buttonid)
 	}
 }
 
@@ -140,12 +140,12 @@ def buttonEvent(button) {
     def result = []
 	if (button == 1) {
     	def mystate = device.currentValue('switch');
-        if (mystate == "on") 
+        if (mystate == "on")
             off()
         else
-            on()   
+            on()
     }
-    updateState("currentButton", "$button")   
+    updateState("currentButton", "$button")
         // update the device state, recording the button press
         result << createEvent(name: "button", value: "pushed", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was pushed", isStateChange: true)
     result
@@ -182,3 +182,16 @@ def updateState(String name, String value) {
 	state[name] = value
 	device.updateDataValue(name, value)
 }
+
+
+def installed() {
+	initialize()
+}
+
+def updated() {
+	initialize()
+}
+
+def initialize() {
+	sendEvent(name: "numberOfButtons", value: 3)
+}

devicetypes/smartthings/cree-bulb.src/README.md

@@ -1,6 +1,6 @@
 # Connected Cree LED Bulb
 
-
+Cloud Execution
 
 Works with: 
 
@@ -23,8 +23,10 @@ Works with:
 
 ## Device Health
 
-A Category C6 Connected Cree LED Bulb with maxReportTime of 5 mins.
-Check-in interval = 12 mins
+Connected Cree LED Bulb with cloud polling it every __5min__
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* __12min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -105,7 +105,7 @@ def healthPoll() {
 def configure() {
     unschedule()
     runEvery5Minutes("healthPoll")
-    // Device-Watch allows 2 check-in misses from device
+    // Device-Watch allows 2 check-in misses from device + ping
     sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/dimmer-switch.src/README.md

@@ -1,6 +1,6 @@
 # Z-wave Dimmer Switch
 
-
+Local Execution on V2 Hubs
 
 Works with:
 
@@ -34,6 +34,8 @@ Not to mention after going OFFLINE when the device is plugged back in, it might
 the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
 it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
 
+* __32min__ checkInterval
+
 ## Troubleshooting
 
 If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -22,9 +22,10 @@ metadata {
 		capability "Sensor"
 		capability "Health Check"
 
-		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
-		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
-		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "Z-Wave Plug-In Dimmer"
+		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer "
+		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer "
+		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "GE Plug-In Smart Dimmer "
+		fingerprint mfr:"0063", prod:"4944", model:"3034", deviceJoinName: "GE In-Wall Smart Fan Control"
 	}
 
 	simulator {
@@ -236,17 +237,17 @@ def refresh() {
 }
 
 void indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on", display: false)
+	sendEvent(name: "indicatorStatus", value: "when on", displayed: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off", display: false)
+	sendEvent(name: "indicatorStatus", value: "when off", displayed: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never", display: false)
+	sendEvent(name: "indicatorStatus", value: "never", displayed: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
 }
 

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -125,7 +125,7 @@ metadata {
 void installed() {
     // The device refreshes every 5 minutes by default so if we miss 2 refreshes we can consider it offline
     // Using 12 minutes because in testing, device health team found that there could be "jitter"
-    sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "cloud", hubHardwareId: device.hub.hardwareID], displayed: false)
+    sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "cloud"], displayed: false)
 }
 
 // Device Watch will ping the device to proactively determine if the device has gone offline

devicetypes/smartthings/fibaro-rgbw-controller.src/fibaro-rgbw-controller.groovy

@@ -29,10 +29,10 @@
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Configuration" 
+		capability "Configuration"
 		capability "Color Control"
         capability "Power Meter"
-       
+
         command "getDeviceData"
         command "softwhite"
         command "daylight"
@@ -54,12 +54,12 @@
         command "setAdjustedColor"
         command "setWhiteLevel"
         command "test"
-        
+
         attribute "whiteLevel", "string"
-      
+
 		fingerprint deviceId: "0x1101", inClusters: "0x27,0x72,0x86,0x26,0x60,0x70,0x32,0x31,0x85,0x33"
 	}
-    
+
     simulator {
     	status "on":  "command: 2003, payload: FF"
     	status "off": "command: 2003, payload: 00"
@@ -84,7 +84,7 @@
 		}
 		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
 			state "level", action:"switch level.setLevel"
-		}     
+		}
 		controlTile("whiteSliderControl", "device.whiteLevel", "slider", height: 1, width: 3, inactiveLabel: false) {
             state "whiteLevel", action:"setWhiteLevel", label:'White Level'
         }
@@ -183,24 +183,24 @@
 		valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
 			state "hue", label: 'Hue ${currentValue}   '
 		}
-        
+
         main(["switch"])
-        details(["switch", 
-                 "levelSliderControl", 
-                 "rgbSelector", 
-                 "whiteSliderControl", 
+        details(["switch",
+                 "levelSliderControl",
+                 "rgbSelector",
+                 "whiteSliderControl",
                  /*"softwhite",
                  "daylight",
                  "warmwhite",
-                 "red", 
-                 "green", 
+                 "red",
+                 "green",
                  "blue",
                  "white",
                  "cyan",
                  "magenta",
                  "orange",
                  "purple",
-                 "yellow",                 
+                 "yellow",
                  "fireplace",
                  "storm",
                  "deepfade",
@@ -214,7 +214,7 @@
 
 def setAdjustedColor(value) {
 	log.debug "setAdjustedColor: ${value}"
-    
+
     toggleTiles("off") //turn off the hard color tiles
 
     def level = device.latestValue("level")
@@ -223,19 +223,19 @@ def setAdjustedColor(value) {
     log.debug "level is: ${level}"
     value.level = level
 
-	def c = hexToRgb(value.hex) 
+	def c = hexToRgb(value.hex)
 	value.rh = hex(c.r * (level/100))
 	value.gh = hex(c.g * (level/100))
 	value.bh = hex(c.b * (level/100))
-	
-    setColor(value)  
+
+    setColor(value)
 }
 
 def setColor(value) {
 	log.debug "setColor: ${value}"
     log.debug "hue is: ${value.hue}"
     log.debug "saturation is: ${value.saturation}"
-    
+
     if (value.size() < 8)
     	toggleTiles("off")
 
@@ -246,22 +246,22 @@ def setColor(value) {
         value.gh = hex(rgb.g)
         value.bh = hex(rgb.b)
     }
-    
+
     if ((value.size() == 3) && (value.hue != null) && (value.saturation != null) && (value.level)) { //user passed in a level value too from outside (App)
     	def rgb = hslToRGB(value.hue, value.saturation, 0.5)
         value.hex = rgbToHex(rgb)
         value.rh = hex(rgb.r * value.level/100)
         value.gh = hex(rgb.g * value.level/100)
-        value.bh = hex(rgb.b * value.level/100)       
+        value.bh = hex(rgb.b * value.level/100)
     }
-    
+
     if (( value.size() == 1) && (value.hex)) { //being called from outside of device (App) with only hex
 		def rgbInt = hexToRgb(value.hex)
         value.rh = hex(rgbInt.r)
         value.gh = hex(rgbInt.g)
         value.bh = hex(rgbInt.b)
     }
-    
+
     if (( value.size() == 2) && (value.hex) && (value.level)) { //being called from outside of device (App) with only hex and level
 
         def rgbInt = hexToRgb(value.hex)
@@ -269,7 +269,7 @@ def setColor(value) {
         value.gh = hex(rgbInt.g * value.level/100)
         value.bh = hex(rgbInt.b * value.level/100)
     }
-    
+
     if (( value.size() == 1) && (value.colorName)) { //being called from outside of device (App) with only color name
         def colorData = getColorData(value.colorName)
         value.rh = colorData.rh
@@ -277,7 +277,7 @@ def setColor(value) {
         value.bh = colorData.bh
         value.hex = "#${value.rh}${value.gh}${value.bh}"
     }
-    
+
     if (( value.size() == 2) && (value.colorName) && (value.level)) { //being called from outside of device (App) with only color name and level
 		def colorData = getColorData(value.colorName)
         value.rh = hex(colorData.r * value.level/100)
@@ -285,7 +285,7 @@ def setColor(value) {
         value.bh = hex(colorData.b * value.level/100)
         value.hex = "#${hex(colorData.r)}${hex(colorData.g)}${hex(colorData.b)}"
     }
-    
+
     if (( value.size() == 3) && (value.red != null) && (value.green != null) && (value.blue != null)) { //being called from outside of device (App) with only color values (0-255)
         value.rh = hex(value.red)
         value.gh = hex(value.green)
@@ -299,7 +299,7 @@ def setColor(value) {
         value.bh = hex(value.blue * value.level/100)
         value.hex = "#${hex(value.red)}${hex(value.green)}${hex(value.blue)}"
     }
-    
+
 	sendEvent(name: "hue", value: value.hue, displayed: false)
 	sendEvent(name: "saturation", value: value.saturation, displayed: false)
 	sendEvent(name: "color", value: value.hex, displayed: false)
@@ -309,26 +309,26 @@ def setColor(value) {
 	if (value.switch) {
 		sendEvent(name: "switch", value: value.switch)
 	}
-	   
+
     sendRGB(value.rh, value.gh, value.bh)
 }
 
 def setLevel(level) {
 	log.debug "setLevel($level)"
-    
+
 	if (level == 0) { off() }
 	else if (device.latestValue("switch") == "off") { on() }
-    
+
     def colorHex = device.latestValue("color")
     if (colorHex == null)
 		colorHex = "#FFFFFF"
-        
+
     def c = hexToRgb(colorHex)
-    
+
     def r = hex(c.r * (level/100))
     def g = hex(c.g * (level/100))
     def b = hex(c.b * (level/100))
-    
+
 	sendEvent(name: "level", value: level)
     sendEvent(name: "setLevel", value: level, displayed: false)
 	sendRGB(r, g, b)
@@ -337,14 +337,14 @@ def setLevel(level) {
 
 def setWhiteLevel(value) {
 	log.debug "setWhiteLevel: ${value}"
-    def level = Math.min(value as Integer, 99)    
+    def level = Math.min(value as Integer, 99)
     level = 255 * level/99 as Integer
     def channel = 0
 
 	if (device.latestValue("switch") == "off") { on() }
-    
+
     sendEvent(name: "whiteLevel", value: value)
-    sendWhite(channel, value)       
+    sendWhite(channel, value)
 }
 
 def sendWhite(channel, value) {
@@ -367,20 +367,20 @@ def sendRGBW(redHex, greenHex, blueHex, whiteHex) {
 
 def configure() {
 	log.debug "Configuring Device For SmartThings Use"
-    
 
-    
+
+
     def cmds = []
-    
+
     // send associate to group 3 to get sensor data reported only to hub
     cmds << zwave.associationV2.associationSet(groupingIdentifier:5, nodeId:[zwaveHubNodeId]).format()
-    
-    
+
+
     //cmds << sendEvent(name: "level", value: 50)
     //cmds << on()
     //cmds << doColorButton("Green")
     delayBetween(cmds, 500)
-    
+
 }
 
 def parse(String description) {
@@ -411,11 +411,11 @@ def parse(String description) {
 
 def getDeviceData() {
     def cmd = []
-    
-    cmd << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet()) 
+
+    cmd << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
     cmd << response(zwave.versionV1.versionGet())
 	cmd << response(zwave.firmwareUpdateMdV1.firmwareMdGet())
-    
+
     delayBetween(cmd, 500)
 }
 
@@ -426,7 +426,7 @@ def createEvent(physicalgraph.zwave.commands.manufacturerspecificv2.Manufacturer
     log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map item1) {	
+def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map item1) {
     updateDataValue("applicationVersion", "${cmd.applicationVersion}")
     log.debug "applicationVersion:      ${cmd.applicationVersion}"
     log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
@@ -435,13 +435,13 @@ def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map it
     log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
 }
 
-def createEvent(physicalgraph.zwave.commands.firmwareupdatemdv1.FirmwareMdReport cmd, Map item1) { 
+def createEvent(physicalgraph.zwave.commands.firmwareupdatemdv1.FirmwareMdReport cmd, Map item1) {
     log.debug "checksum:       ${cmd.checksum}"
     log.debug "firmwareId:     ${cmd.firmwareId}"
     log.debug "manufacturerId: ${cmd.manufacturerId}"
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.colorcontrolv1.CapabilityReport cmd, Map item1) { 
+def zwaveEvent(physicalgraph.zwave.commands.colorcontrolv1.CapabilityReport cmd, Map item1) {
 
 	log.debug "In CapabilityReport"
 }
@@ -546,7 +546,7 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport
      def value = "when off"
      if (cmd.configurationValue[0] == 1) {value = "when on"}
      if (cmd.configurationValue[0] == 2) {value = "never"}
-     [name: "indicatorStatus", value: value, display: false]
+     [name: "indicatorStatus", value: value, displayed: false]
 }
 */
 def createEvent(physicalgraph.zwave.Command cmd,  Map map) {
@@ -557,7 +557,7 @@ def createEvent(physicalgraph.zwave.Command cmd,  Map map) {
 def on() {
 	log.debug "on()"
 	sendEvent(name: "switch", value: "on")
-	delayBetween([zwave.basicV1.basicSet(value: 0xFF).format(), 
+	delayBetween([zwave.basicV1.basicSet(value: 0xFF).format(),
     			  zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
 }
 
@@ -593,7 +593,7 @@ def refresh() {
  * @return none
  */
 def updateZwaveParam(params) {
-	if ( params ) {   
+	if ( params ) {
         def pNumber = params.paramNumber
         def pSize	= params.size
         def pValue	= [params.value]
@@ -601,9 +601,9 @@ def updateZwaveParam(params) {
 
 		def cmds = []
         cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
-        
+
         cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
-        delayBetween(cmds, 1500)        
+        delayBetween(cmds, 1500)
     }
 }
 
@@ -612,22 +612,22 @@ def test() {
     //value = [hue: 0, saturation: 100, level: 5]
     //value = [red: 255, green: 0, blue: 255, level: 60]
 	//setColor(value)
-    
+
     def cmd = []
-    
+
     if ( !state.cnt ) {
     	state.cnt = 6
     } else {
     	state.cnt = state.cnt + 1
     }
-    
+
     if ( state.cnt > 10 )
     	state.cnt = 6
-    
+
     // run programmed light show
 	cmd << zwave.configurationV1.configurationSet(configurationValue: [state.cnt], parameterNumber: 72, size: 1).format()
-    cmd << zwave.configurationV1.configurationGet(parameterNumber: 72).format()  
-    
+    cmd << zwave.configurationV1.configurationGet(parameterNumber: 72).format()
+
     delayBetween(cmd, 500)
 
 }
@@ -638,23 +638,23 @@ def colorNameToRgb(color) {
         [name:"Soft White",	r: 255, g: 241, b: 224	],
         [name:"Daylight", 	r: 255, g: 255, b: 251	],
         [name:"Warm White", r: 255, g: 244, b: 229	],
-        
+
         [name:"Red", 		r: 255, g: 0,	b: 0	],
 		[name:"Green", 		r: 0, 	g: 255,	b: 0	],
         [name:"Blue", 		r: 0, 	g: 0,	b: 255	],
-        
+
 		[name:"Cyan", 		r: 0, 	g: 255,	b: 255	],
-        [name:"Magenta", 	r: 255, g: 0,	b: 33	],       
+        [name:"Magenta", 	r: 255, g: 0,	b: 33	],
         [name:"Orange", 	r: 255, g: 102, b: 0	],
-        
+
         [name:"Purple", 	r: 170, g: 0,	b: 255	],
 		[name:"Yellow", 	r: 255, g: 255, b: 0	],
         [name:"White", 		r: 255, g: 255, b: 255	]
 	]
-    
-    def colorData = [:]    
+
+    def colorData = [:]
     colorData = colors.find { it.name == color }
-    
+
     colorData
 }
 
@@ -670,7 +670,7 @@ def hexToRgb(colorHex) {
 	def rrInt = Integer.parseInt(colorHex.substring(1,3),16)
     def ggInt = Integer.parseInt(colorHex.substring(3,5),16)
     def bbInt = Integer.parseInt(colorHex.substring(5,7),16)
-    
+
     def colorData = [:]
     colorData = [r: rrInt, g: ggInt, b: bbInt]
     colorData
@@ -681,7 +681,7 @@ def rgbToHex(rgb) {
     def g = hex(rgb.g)
     def b = hex(rgb.b)
     def hexColor = "#${r}${g}${b}"
-    
+
     hexColor
 }
 
@@ -689,11 +689,11 @@ def hslToRGB(float var_h, float var_s, float var_l) {
 	float h = var_h / 100
     float s = var_s / 100
     float l = var_l
-    
+
     def r = 0
     def g = 0
     def b = 0
-    
+
 	if (s == 0) {
     	r = l * 255
         g = l * 255
@@ -705,26 +705,26 @@ def hslToRGB(float var_h, float var_s, float var_l) {
         } else {
         	var_2 = (l + s) - (s * l)
         }
-                
+
         float var_1 = 2 * l - var_2
-        
+
         r = 255 * hueToRgb(var_1, var_2, h + (1 / 3))
         g = 255 * hueToRgb(var_1, var_2, h)
-        b = 255 * hueToRgb(var_1, var_2, h - (1 / 3))    
+        b = 255 * hueToRgb(var_1, var_2, h - (1 / 3))
     }
-    
+
     def rgb = [:]
     rgb = [r: r, g: g, b: b]
 
-    rgb 
+    rgb
 }
 
 def hueToRgb(v1, v2, vh) {
-	if (vh < 0) { vh += 1 }            
+	if (vh < 0) { vh += 1 }
 	if (vh > 1) { vh -= 1 }
 	if ((6 * vh) < 1) { return (v1 + (v2 - v1) * 6 * vh) }
     if ((2 * vh) < 1) { return (v2) }
-    if ((3 * vh) < 2) { return (v1 + (v2 - $v1) * ((2 / 3 - vh) * 6)) }    
+    if ((3 * vh) < 2) { return (v1 + (v2 - $v1) * ((2 / 3 - vh) * 6)) }
     return (v1)
 }
 
@@ -735,49 +735,49 @@ def rgbToHSL(rgb) {
     def h = 0
     def s = 0
     def l = 0
-    
+
     def var_min = [r,g,b].min()
     def var_max = [r,g,b].max()
     def del_max = var_max - var_min
-    
+
     l = (var_max + var_min) / 2
-    
+
     if (del_max == 0) {
             h = 0
             s = 0
     } else {
-    	if (l < 0.5) { s = del_max / (var_max + var_min) } 
+    	if (l < 0.5) { s = del_max / (var_max + var_min) }
         else { s = del_max / (2 - var_max - var_min) }
 
         def del_r = (((var_max - r) / 6) + (del_max / 2)) / del_max
         def del_g = (((var_max - g) / 6) + (del_max / 2)) / del_max
         def del_b = (((var_max - b) / 6) + (del_max / 2)) / del_max
 
-        if (r == var_max) { h = del_b - del_g } 
-        else if (g == var_max) { h = (1 / 3) + del_r - del_b } 
+        if (r == var_max) { h = del_b - del_g }
+        else if (g == var_max) { h = (1 / 3) + del_r - del_b }
         else if (b == var_max) { h = (2 / 3) + del_g - del_r }
-        
+
 		if (h < 0) { h += 1 }
         if (h > 1) { h -= 1 }
 	}
-    def hsl = [:]    
+    def hsl = [:]
     hsl = [h: h * 100, s: s * 100, l: l]
-    
+
     hsl
 }
 
 def getColorData(colorName) {
 	log.debug "getColorData: ${colorName}"
-    
+
     def colorRGB = colorNameToRgb(colorName)
     def colorHex = rgbToHex(colorRGB)
 	def colorHSL = rgbToHSL(colorRGB)
-        
+
     def colorData = [:]
-    colorData = [h: colorHSL.h, 
-    			 s: colorHSL.s, 
-                 l: device.latestValue("level"), 
-                 r: colorRGB.r, 
+    colorData = [h: colorHSL.h,
+    			 s: colorHSL.s,
+                 l: device.latestValue("level"),
+                 r: colorRGB.r,
                  g: colorRGB.g,
                  b: colorRGB.b,
                  rh: hex(colorRGB.r),
@@ -785,8 +785,8 @@ def getColorData(colorName) {
                  bh: hex(colorRGB.b),
                  hex: colorHex,
                  alpha: 1]
-     
-     colorData                 
+
+     colorData
 }
 
 def doColorButton(colorName) {
@@ -798,7 +798,7 @@ def doColorButton(colorName) {
     def maxLevel = hex(99)
 
     toggleTiles(colorName.toLowerCase().replaceAll("\\s",""))
-    
+
     if 		( colorName == "Fire Place" ) 	{ updateZwaveParam([paramNumber:72, value:6,  size:1]) }
 	else if ( colorName == "Storm" ) 		{ updateZwaveParam([paramNumber:72, value:7,  size:1]) }
     else if ( colorName == "Deep Fade" ) 	{ updateZwaveParam([paramNumber:72, value:8,  size:1]) }
@@ -808,8 +808,8 @@ def doColorButton(colorName) {
     else if ( colorName == "Daylight" ) 	{ String.format("33050400${maxLevel}02${maxLevel}03${maxLevel}04${maxLevel}%02X", 100) }
     else {
 		def c = getColorData(colorName)
-		def newValue = ["hue": c.h, "saturation": c.s, "level": level, "red": c.r, "green": c.g, "blue": c.b, "hex": c.hex, "alpha": c.alpha]  
-    	setColor(newValue)            
+		def newValue = ["hue": c.h, "saturation": c.s, "level": level, "red": c.r, "green": c.g, "blue": c.b, "hex": c.hex, "alpha": c.alpha]
+    	setColor(newValue)
     	def r = hex(c.r * (level/100))
     	def g = hex(c.g * (level/100))
     	def b = hex(c.b * (level/100))
@@ -823,19 +823,19 @@ def toggleTiles(color) {
 	if ( !state.colorTiles ) {
     	state.colorTiles = ["softwhite","daylight","warmwhite","red","green","blue","cyan","magenta","orange","purple","yellow","white","fireplace","storm","deepfade","litefade","police"]
     }
-    
+
     def cmds = []
-    
+
     state.colorTiles.each({
     	if ( it == color ) {
         	log.debug "Turning ${it} on"
-            cmds << sendEvent(name: it, value: "on${it}", display: True, descriptionText: "${device.displayName} ${color} is 'ON'", isStateChange: true)
+            cmds << sendEvent(name: it, value: "on${it}", displayed: True, descriptionText: "${device.displayName} ${color} is 'ON'", isStateChange: true)
         } else {
         	//log.debug "Turning ${it} off"
         	cmds << sendEvent(name: it, value: "off${it}", displayed: false)
         }
     })
-    
+
     delayBetween(cmds, 2500)
 }
 

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -99,7 +99,7 @@ def parse(String description) {
 
 def poll() {
     def refreshCmds = [
-        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 2000"
     ]
 
     return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh()
@@ -197,7 +197,7 @@ def off() {
 
 def refresh() {
     def refreshCmds = [
-        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 2000"
     ]
 
     return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig()

devicetypes/smartthings/ge-zigbee-dimmer.src/ge-zigbee-dimmer.groovy

@@ -1,96 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *	    GE/Jasco ZigBee Dimmer
- *
- *	Author: SmartThings
- *	Date: 2015-07-01
- */
-
-metadata {
-	definition (name: "GE ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
-		capability "Switch"
-		capability "Switch Level"
-		capability "Power Meter"
-		capability "Configuration"
-		capability "Refresh"
-		capability "Actuator"
-		capability "Sensor"
-
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-			tileAttribute ("power", key: "SECONDARY_CONTROL") {
-				attributeState "power", label:'${currentValue} W'
-			}
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		main "switch"
-		details(["switch", "refresh"])
-	}
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	log.debug "description is $description"
-
-	def event = zigbee.getEvent(description)
-	if (event) {
-		log.info event
-		if (event.name == "power") {
-			if (device.getDataValue("manufacturer") != "OSRAM") {       //OSRAM devices do not reliably update power
-				event.value = (event.value as Integer) / 10             //TODO: The divisor value needs to be set as part of configuration
-				sendEvent(event)
-			}
-		}
-		else {
-			sendEvent(event)
-		}
-	}
-	else {
-		log.warn "DID NOT PARSE MESSAGE for description : $description"
-		log.debug zigbee.parseDescriptionAsMap(description)
-	}
-}
-
-def off() {
-	zigbee.off()
-}
-
-def on() {
-	zigbee.on()
-}
-
-def setLevel(value) {
-	zigbee.setLevel(value)
-}
-
-def refresh() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
-}
-
-def configure() {
-	log.debug "Configuring Reporting and Bindings."
-	refresh()
-}

devicetypes/smartthings/ge-zigbee-switch.src/ge-zigbee-switch.groovy

@@ -1,86 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *	    GE/Jasco ZigBee Switch
- *
- *	Author: SmartThings
- *	Date: 2015-07-01
- */
-
-metadata {
-	// Automatically generated. Make future change here.
-	definition (name: "GE ZigBee Switch", namespace: "smartthings", author: "SmartThings") {
-		capability "Switch"
-		capability "Power Meter"
-		capability "Configuration"
-		capability "Refresh"
-		capability "Actuator"
-		capability "Sensor"
-
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("power", key: "SECONDARY_CONTROL") {
-				attributeState "power", label:'${currentValue} W'
-			}
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		main "switch"
-		details(["switch", "refresh"])
-	}
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	log.debug "description is $description"
-	def event = zigbee.getEvent(description)
-	if (event) {
-		if (event.name == "power") {
-			def powerValue
-			powerValue = (event.value as Integer)/10            //TODO: The divisor value needs to be set as part of configuration
-			sendEvent(name: "power", value: powerValue)
-		}
-		else {
-			sendEvent(event)
-		}
-	}
-	else {
-		log.warn "DID NOT PARSE MESSAGE for description : $description"
-		log.debug zigbee.parseDescriptionAsMap(description)
-	}
-}
-
-def off() {
-	zigbee.off()
-}
-
-def on() {
-	zigbee.on()
-}
-
-def refresh() {
-	zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
-}
-
-def configure() {
-	log.debug "Configuring Reporting and Bindings."
-	refresh()
-}

devicetypes/smartthings/life360-user.src/life360-user.groovy

@@ -39,7 +39,7 @@ metadata {
 }
 
 def generatePresenceEvent(boolean present) {
-	log.debug "Here in generatePresenceEvent!"
+	log.info "Life360 generatePresenceEvent($present)"
 	def value = formatValue(present)
 	def linkText = getLinkText(device)
 	def descriptionText = formatDescriptionText(linkText, present)

devicetypes/smartthings/momentary-button-tile.src/momentary-button-tile.groovy

@@ -43,8 +43,8 @@ def parse(String description) {
 }
 
 def push() {
-	sendEvent(name: "switch", value: "on", isStateChange: true, display: false)
-	sendEvent(name: "switch", value: "off", isStateChange: true, display: false)
+	sendEvent(name: "switch", value: "on", isStateChange: true, displayed: false)
+	sendEvent(name: "switch", value: "off", isStateChange: true, displayed: false)
 	sendEvent(name: "momentary", value: "pushed", isStateChange: true)
 }
 

devicetypes/smartthings/nyce-open-closed-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Nyce Door/Window Sensor (Open/Close Sensor)
 
-
+Cloud Execution
 
 Works with:
 
@@ -23,7 +23,11 @@ Works with:
 
 ## Device Health
 
-A Category C2 Nyce Door/Window sensor that has 12min check-in interval
+Nyce Door/Window sensor with reporting interval of 5 min.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+ 
+* __12min__ checkInterval
+
 
 ## Battery Specification
 

devicetypes/smartthings/osram-lightify-gardenspot-mini-rgb.src/osram-lightify-gardenspot-mini-rgb.groovy

@@ -1,145 +0,0 @@
-/*
-    Osram Lightify Gardenspot Mini RGB
-
-    Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
-    that issue by using state variables
-*/
-
-metadata {
-    definition (name: "OSRAM LIGHTIFY Gardenspot mini RGB", namespace: "smartthings", author: "SmartThings") {
-
-        capability "Color Temperature"
-        capability "Actuator"
-        capability "Switch"
-        capability "Switch Level"
-        capability "Configuration"
-        capability "Polling"
-        capability "Refresh"
-        capability "Sensor"
-        capability "Color Control"
-
-        attribute "colorName", "string"
-
-        command "setAdjustedColor"
-    }
-
-    // UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel"
-            }
-            tileAttribute ("device.color", key: "COLOR_CONTROL") {
-                attributeState "color", action:"color control.setColor"
-            }
-        }
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        main(["switch"])
-        details(["switch", "refresh"])
-    }
-}
-
-//Globals
-private getATTRIBUTE_HUE() { 0x0000 }
-private getATTRIBUTE_SATURATION() { 0x0001 }
-private getHUE_COMMAND() { 0x00 }
-private getSATURATION_COMMAND() { 0x03 }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    log.debug "description is $description"
-
-    def event = zigbee.getEvent(description)
-    if (event) {
-        log.debug event
-        if (event.name=="level" && event.value==0) {}
-        else {
-            sendEvent(event)
-        }
-    }
-    else {
-        def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-        def cluster = zigbee.parse(description)
-
-        if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
-            if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-                sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
-            }
-            else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-                sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
-            }
-        }
-        else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00){
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: $cluster"
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
-        else {
-            log.info "DID NOT PARSE MESSAGE for description : $description"
-            log.debug zigbeeMap
-        }
-    }
-}
-
-def on() {
-    zigbee.on()
-}
-
-def off() {
-    zigbee.off()
-}
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return zigbee.onOffRefresh()
-}
-
-def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
-}
-
-def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
-    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
-}
-
-def setLevel(value) {
-    zigbee.setLevel(value)
-}
-
-def setColor(value){
-    log.trace "setColor($value)"
-    zigbee.on() + setHue(value.hue) + "delay 500" + setSaturation(value.saturation)
-}
-
-def setHue(value) {
-    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
-}
-
-def setSaturation(value) {
-    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
-}

devicetypes/smartthings/osram-lightify-led-flexible-strip-rgbw.src/osram-lightify-led-flexible-strip-rgbw.groovy

@@ -1,183 +0,0 @@
-/*
-    Osram Flex RGBW Light Strip
-
-    Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
-    that issue by using state variables
-*/
-//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
-
-metadata {
-	definition (name: "OSRAM LIGHTIFY LED Flexible Strip RGBW", namespace: "smartthings", author: "SmartThings") {
-
-        capability "Color Temperature"
-        capability "Actuator"
-        capability "Switch"
-		capability "Switch Level"
-		capability "Configuration"
-		capability "Polling"
-		capability "Refresh"
-		capability "Sensor"
-		capability "Color Control"
-
-        attribute "colorName", "string"
-
-        command "setAdjustedColor"
-
-
-		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW"
-        //fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW"
-
-    }
-
-    // UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel"
-            }
-            tileAttribute ("device.color", key: "COLOR_CONTROL") {
-                attributeState "color", action:"color control.setColor"
-            }
-        }
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorName", label: '${currentValue}'
-        }
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorName", "refresh"])
-    }
-}
-
-//Globals
-private getATTRIBUTE_HUE() { 0x0000 }
-private getATTRIBUTE_SATURATION() { 0x0001 }
-private getHUE_COMMAND() { 0x00 }
-private getSATURATION_COMMAND() { 0x03 }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    log.debug "description is $description"
-
-    def event = zigbee.getEvent(description)
-    if (event) {
-        log.debug event
-        if (event.name=="level" && event.value==0) {}
-        else {
-            if (event.name=="colorTemperature") {
-                setGenericName(event.value)
-            }
-            sendEvent(event)
-        }
-    }
-    else {
-        def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-        def cluster = zigbee.parse(description)
-
-        if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
-            if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-                sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
-            }
-            else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-                sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
-            }
-        }
-        else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00){
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
-        else {
-            log.info "DID NOT PARSE MESSAGE for description : $description"
-            log.debug zigbeeMap
-        }
-    }
-}
-
-def on() {
-    zigbee.on()
-}
-
-def off() {
-    zigbee.off()
-}
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return zigbee.onOffRefresh()
-}
-
-def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
-}
-
-def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
-    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh()
-}
-
-def setColorTemperature(value) {
-    setGenericName(value)
-    zigbee.setColorTemperature(value)
-}
-
-//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
-def setGenericName(value){
-    if (value != null) {
-        def genericName = "White"
-        if (value < 3300) {
-            genericName = "Soft White"
-        } else if (value < 4150) {
-            genericName = "Moonlight"
-        } else if (value <= 5000) {
-            genericName = "Cool White"
-        } else if (value >= 5000) {
-            genericName = "Daylight"
-        }
-        sendEvent(name: "colorName", value: genericName)
-    }
-}
-
-def setLevel(value) {
-    zigbee.setLevel(value)
-}
-
-def setColor(value){
-    log.trace "setColor($value)"
-    zigbee.on() + setHue(value.hue) + "delay 300" + setSaturation(value.saturation)
-}
-
-def setHue(value) {
-    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
-}
-
-def setSaturation(value) {
-    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
-}

devicetypes/smartthings/osram-lightify-led-tunable-white-60w.src/osram-lightify-led-tunable-white-60w.groovy

@@ -1,139 +0,0 @@
-/*
-    Osram Tunable White 60 A19 bulb
-
-    Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
-    that issue by using state variables
-*/
-
-//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
-
-metadata {
-    definition (name: "OSRAM LIGHTIFY LED Tunable White 60W", namespace: "smartthings", author: "SmartThings") {
-
-        capability "Color Temperature"
-        capability "Actuator"
-        capability "Switch"
-        capability "Switch Level"
-        capability "Configuration"
-        capability "Refresh"
-        capability "Sensor"
-
-        attribute "colorName", "string"
-    }
-
-    // UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel"
-            }
-        }
-
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorName", label: '${currentValue}'
-        }
-
-        main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorName", "refresh"])
-    }
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    log.debug "description is $description"
-    def event = zigbee.getEvent(description)
-    if (event) {
-        if (event.name=="level" && event.value==0) {}
-        else {
-            if (event.name=="colorTemperature") {
-                setGenericName(event.value)
-            }
-            sendEvent(event)
-        }
-    }
-    else {
-        def cluster = zigbee.parse(description)
-
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
-        }
-    }
-}
-
-def off() {
-    zigbee.off()
-}
-
-def on() {
-    zigbee.on()
-}
-
-def setLevel(value) {
-    zigbee.setLevel(value)
-}
-
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return zigbee.onOffRefresh()
-}
-
-def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
-}
-
-def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
-    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh()
-}
-
-def setColorTemperature(value) {
-    setGenericName(value)
-    zigbee.setColorTemperature(value)
-}
-
-//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
-def setGenericName(value){
-    if (value != null) {
-        def genericName = "White"
-        if (value < 3300) {
-            genericName = "Soft White"
-        } else if (value < 4150) {
-            genericName = "Moonlight"
-        } else if (value <= 5000) {
-            genericName = "Cool White"
-        } else if (value >= 5000) {
-            genericName = "Daylight"
-        }
-        sendEvent(name: "colorName", value: genericName)
-    }
-}

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -71,7 +71,7 @@ def parse(String description) {
 
 	def event = [:]
 	def finalResult = isKnownDescription(description)
-	if (finalResult != "false") {
+	if (finalResult) {
 		log.info finalResult
 		if (finalResult.type == "update") {
 			log.info "$device updates: ${finalResult.value}"
@@ -128,9 +128,9 @@ def setLevel(value) {
 
 def refresh() {
 	[
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0B04 0x050B", "delay 500"
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 2000",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 2000",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0B04 0x050B", "delay 2000"
 	]
 
 }
@@ -212,13 +212,16 @@ def isKnownDescription(description) {
 		else if (descMap.cluster == "0B04" || descMap.clusterId == "0B04"){
 			isDescriptionPower(descMap)
 		}
+		else {
+			return [:]
+		}
 	}
 	else if(description?.startsWith("on/off:")) {
 		def switchValue = description?.endsWith("1") ? "on" : "off"
 		return	[type: "switch", value : switchValue]
 	}
 	else {
-		return "false"
+		return [:]
 	}
 }
 
@@ -252,7 +255,7 @@ def isDescriptionOnOff(descMap) {
 		return	[type: "switch", value : switchValue]
 	}
 	else {
-		return "false"
+		return [:]
 	}
 
 }
@@ -279,10 +282,9 @@ def isDescriptionLevel(descMap) {
 
 	if (dimmerValue != -1){
 		return	[type: "level", value : dimmerValue]
-
 	}
 	else {
-		return "false"
+		return [:]
 	}
 }
 
@@ -304,16 +306,16 @@ def isDescriptionPower(descMap) {
 		return	[type: "power", value : powerValue]
 	}
 	else {
-		return "false"
+		return [:]
 	}
 }
 
 
 def onOffConfig() {
 	[
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 6 0 0x10 0 600 {01}",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 2000",
+			"zcl global send-me-a-report 6 0 0x10 0 600 {01}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
 	]
 }
 
@@ -321,9 +323,9 @@ def onOffConfig() {
 //min level change is 01
 def levelConfig() {
 	[
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 8 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 8 0 0x20 5 3600 {01}",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 8 {${device.zigbeeId}} {}", "delay 2000",
+			"zcl global send-me-a-report 8 0 0x20 5 3600 {01}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
 	]
 }
 
@@ -331,9 +333,10 @@ def levelConfig() {
 //min change in value is 05
 def powerConfig() {
 	[
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 2000",
 		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+		"delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
 	]
 }
 
@@ -342,7 +345,10 @@ def setLevelWithRate(level, rate) {
 		rate = "0000"
 	}
 	level = convertToHexString(level * 255 / 100) 				//Converting the 0-100 range to 0-FF range in hex
-	"st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {$level $rate}"
+	[
+			"st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {$level $rate}",
+			"delay 2000"
+	]
 }
 
 String convertToHexString(value, width=2) {

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -51,7 +51,7 @@ def on() {
 			'zcl on-off on',
 			'delay 200',
 			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
+			'delay 2000'
 
 	]
 
@@ -62,6 +62,6 @@ def off() {
 			'zcl on-off off',
 			'delay 200',
 			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
+			'delay 2000'
 	]
 }

devicetypes/smartthings/smartpower-outlet.src/README.md

@@ -1,6 +1,6 @@
 # SmartPower Outlet
 
-
+Local Execution on V2 Hubs
 
 Works with: 
 
@@ -23,10 +23,11 @@ Works with:
 
 ## Device Health
 
-A Category C1 smart power outlet with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+SmartPower outlet with reporting interval of 5 mins
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* V1, TV, HubV2 AppEngine < 1.5.1 - __21min__ checkInterval
+* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -145,9 +145,9 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
 	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
 	refresh() + zigbee.onOffConfig(0, 300) + powerConfig()
@@ -157,9 +157,10 @@ def configure() {
 //min change in value is 01
 def powerConfig() {
 	[
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 2000",
 		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+		"delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
 	]
 }
 

devicetypes/smartthings/smartsense-moisture-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Smartsense Moisture Sensor
 
-
+Local Execution on V2 Hubs
 
 Works with: 
 
@@ -23,10 +23,11 @@ Works with:
 
 ## Device Health
 
-A Category C2 moisture sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+SmartSense Moisture sensor with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
+* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -29,9 +29,10 @@ metadata {
 		command "enrollResponse"
 
 
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-S", deviceJoinName: "Water Leak Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
+		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-L", deviceJoinName: "Iris Smart Water Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}
 
@@ -128,7 +129,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00){
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
@@ -285,17 +286,17 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
 	]
 
 	return refreshCmds + enrollResponse()
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
 	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
@@ -308,10 +309,10 @@ def enrollResponse() {
 	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+		"raw 0x500 {01 23 00 00 00}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
 	]
 }
 

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Smartsense Motion Sensor
 
-
+Local Execution on V2 Hubs
 
 Works with: 
 
@@ -22,10 +22,12 @@ Works with:
 
 ## Device Health
 
-A Category C2 motion sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime.
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+SmartSense Motion sensor with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
+* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
+
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -132,7 +132,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
@@ -298,17 +298,17 @@ def ping() {
 def refresh() {
 	log.debug "refresh called"
 	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
 	]
 
 	return refreshCmds + enrollResponse()
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
 	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
@@ -321,10 +321,10 @@ def enrollResponse() {
 	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+		"raw 0x500 {01 23 00 00 00}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
 	]
 }
 

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -1,328 +0,0 @@
-/**
- *  SmartSense Motion/Temp Sensor
- *
- *  Copyright 2014 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-//DEPRECATED - Using the smartsense-motion-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
-
-metadata {
-	definition (name: "SmartSense Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
-		capability "Motion Sensor"
-		capability "Configuration"
-		capability "Battery"
-        capability "Temperature Measurement"
-		capability "Refresh"
-		capability "Sensor"
-
-        command "enrollResponse"
-
-	}
-
-	preferences {
-		section {
-			image(name: 'educationalcontent', multiple: true, images: [
-					"http://cdn.device-gse.smartthings.com/Motion/Motion1.jpg",
-					"http://cdn.device-gse.smartthings.com/Motion/Motion2.jpg",
-					"http://cdn.device-gse.smartthings.com/Motion/Motion3.jpg"
-			])
-		}
-		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
-		}
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
-			}
-		}
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}°', unit:"F",
-					backgroundColors:[
-							[value: 31, color: "#153591"],
-							[value: 44, color: "#1e9cbb"],
-							[value: 59, color: "#90d2a7"],
-							[value: 74, color: "#44b621"],
-							[value: 84, color: "#f1d801"],
-							[value: 95, color: "#d04e00"],
-							[value: 96, color: "#bc2323"]
-					]
-			)
-		}
-		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main(["motion", "temperature"])
-		details(["motion", "temperature", "battery", "refresh"])
-	}
-}
-
-def parse(String description) {
-	log.debug "description: $description"
-
-	Map map = [:]
-	if (description?.startsWith('catchall:')) {
-		map = parseCatchAllMessage(description)
-	}
-	else if (description?.startsWith('read attr -')) {
-		map = parseReportAttributeMessage(description)
-	}
-	else if (description?.startsWith('temperature: ')) {
-		map = parseCustomMessage(description)
-	}
-	else if (description?.startsWith('zone status')) {
-		map = parseIasMessage(description)
-	}
-
-	log.debug "Parse returned $map"
-	def result = map ? createEvent(map) : [:]
-
-	if (description?.startsWith('enroll request')) {
-		List cmds = enrollResponse()
-		log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
-	return result
-}
-
-private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
-	def cluster = zigbee.parse(description)
-	if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
-			case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
-				break
-
-			case 0x0402:
-				if (cluster.command == 0x07) {
-					if (cluster.data[0] == 0x00) {
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
-				break
-
-			case 0x0406:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					log.debug 'motion'
-					resultMap.name = 'motion'
-				}
-				break
-		}
-	}
-
-	return resultMap
-}
-
-private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
-			cluster.command == 0x0B ||
-			(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
-}
-
-private Map parseReportAttributeMessage(String description) {
-	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-	}
-	log.debug "Desc Map: $descMap"
-
-	Map resultMap = [:]
-	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
-		def value = getTemperature(descMap.value)
-		resultMap = getTemperatureResult(value)
-	}
-	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
-	}
-	else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
-		def value = descMap.value.endsWith("01") ? "active" : "inactive"
-		resultMap = getMotionResult(value)
-	}
-
-	return resultMap
-}
-
-private Map parseCustomMessage(String description) {
-	Map resultMap = [:]
-	if (description?.startsWith('temperature: ')) {
-		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
-		resultMap = getTemperatureResult(value)
-	}
-	return resultMap
-}
-
-private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
-
-	// Some sensor models that use this DTH use alarm1 and some use alarm2 to signify motion
-	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
-}
-
-def getTemperature(value) {
-	def celsius = Integer.parseInt(value, 16).shortValue() / 100
-	if(getTemperatureScale() == "C"){
-		return Math.round(celsius)
-	} else {
-		return Math.round(celsiusToFahrenheit(celsius))
-	}
-}
-
-private Map getBatteryResult(rawValue) {
-	log.debug 'Battery'
-	def linkText = getLinkText(device)
-
-	def result = [:]
-
-	def volts = rawValue / 10
-
-	if (!(rawValue == 0 || rawValue == 255)) {
-		def minVolts = 2.1
-		def maxVolts = 3.0
-		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		if (roundedPct <= 0)
-			roundedPct = 1
-		result.name = 'battery'
-		result.value = Math.min(100, roundedPct)
-		result.descriptionText = "${linkText} battery was ${result.value}%"
-
-	}
-
-	return result
-}
-
-private Map getTemperatureResult(value) {
-	log.debug 'TEMP'
-	if (tempOffset) {
-		def offset = tempOffset as int
-		def v = value as int
-		value = v + offset
-	}
-	def descriptionText
-	if ( temperatureScale == 'C' )
-		descriptionText = '{{ device.displayName }} was {{ value }}°C'
-	else
-		descriptionText = '{{ device.displayName }} was {{ value }}°F'
-
-	return [
-			name: 'temperature',
-			value: value,
-			descriptionText: descriptionText,
-			translatable: true,
-			unit: temperatureScale
-	]
-}
-
-private Map getMotionResult(value) {
-	log.debug 'motion'
-	String descriptionText = value == 'active' ? "{{ device.displayName }} detected motion" : "{{ device.displayName }} motion has stopped"
-	return [
-			name: 'motion',
-			value: value,
-			descriptionText: descriptionText,
-			translatable: true
-	]
-}
-
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-}
-
-def refresh() {
-	log.debug "refresh called"
-	def refreshCmds = [
-			"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-			"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
-	]
-
-	return refreshCmds + enrollResponse()
-}
-
-def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
-	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
-}
-
-def enrollResponse() {
-	log.debug "Sending enroll response"
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	[
-			//Resending the CIE in case the enroll request is sent before CIE is written
-			"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-			//Enroll Response
-			"raw 0x500 {01 23 00 00 00}",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 200"
-	]
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value) {
-	new BigInteger(Math.round(value).toString()).toString(16)
-}
-
-private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-	int i = 0;
-	int j = array.length - 1;
-	byte tmp;
-	while (j > i) {
-		tmp = array[j];
-		array[j] = array[i];
-		array[i] = tmp;
-		j--;
-		i++;
-	}
-	return array
-}

devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy

@@ -57,6 +57,7 @@ def parse(String description) {
 
 private Map parseBasicMessage(description) {
 	def name = parseName(description)
+	def results = [:]
 	if (name != null) {
 		def value = parseValue(description)
 		def linkText = getLinkText(device)
@@ -64,7 +65,7 @@ private Map parseBasicMessage(description) {
 		def handlerName = value
 		def isStateChange = isStateChange(device, name, value)
 
-		def results = [
+		results = [
 				name           : name,
 				value          : value,
 				linkText       : linkText,
@@ -73,8 +74,6 @@ private Map parseBasicMessage(description) {
 				isStateChange  : isStateChange,
 				displayed      : displayed(description, isStateChange)
 		]
-	} else {
-		results = [:]
 	}
 	log.debug "Parse returned $results.descriptionText"
 	return results

devicetypes/smartthings/smartsense-multi-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Smartsense Multi Sensor
 
-
+Local Execution on V2 Hubs
 
 Works with: 
 
@@ -26,10 +26,11 @@ Works with:
 
 ## Device Health
 
-A Category C2 multi sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+SmartSense Multi sensor with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
+* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -161,7 +161,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if(cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
@@ -339,7 +339,7 @@ private Map getContactResult(value) {
 	log.debug "Contact: ${device.displayName} value = ${value}"
 	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
 	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
-	sendEvent(name: 'status', value: value, descriptionText: descriptionText, translatable: true)
+	return [name: 'status', value: value, descriptionText: descriptionText, translatable: true]
 }
 
 private getAccelerationResult(numValue) {
@@ -400,9 +400,9 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
 	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting"
 
@@ -428,10 +428,10 @@ def enrollResponse() {
 	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
 		//Enroll Response
 		"raw 0x500 {01 23 00 00 00}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
 	]
 }
 

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -1,503 +0,0 @@
-/**
- *  SmartSense Open/Closed Accelerometer Sensor
- *
- *  Copyright 2014 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-//DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
-
-metadata {
-	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
-		capability "Battery"
-		capability "Configuration"
-		capability "Contact Sensor"
-		capability "Acceleration Sensor"
-		capability "Refresh"
-		capability "Temperature Measurement"
-		capability "Health Check"
-		capability "Sensor"
-
-		command "enrollResponse"
-		attribute "status", "string"
-	}
-
-	preferences {
-		section {
-			image(name: 'educationalcontent', multiple: true, images: [
-					"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
-					"http://cdn.device-gse.smartthings.com/Multi/Multi2.jpg",
-					"http://cdn.device-gse.smartthings.com/Multi/Multi3.jpg",
-					"http://cdn.device-gse.smartthings.com/Multi/Multi4.jpg"
-			])
-		}
-		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
-		}
-		section {
-			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", description: "Tap to set", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
-		}
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
-				attributeState "garage-open", label:'Open', icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e"
-				attributeState "garage-closed", label:'Closed', icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821"
-			}
-		}
-		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-			state("closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
-		}
-		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label:'Active', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'Inactive', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
-		}
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}°',
-					backgroundColors:[
-							[value: 31, color: "#153591"],
-							[value: 44, color: "#1e9cbb"],
-							[value: 59, color: "#90d2a7"],
-							[value: 74, color: "#44b621"],
-							[value: 84, color: "#f1d801"],
-							[value: 95, color: "#d04e00"],
-							[value: 96, color: "#bc2323"]
-					]
-			)
-		}
-		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-
-		main(["status", "acceleration", "temperature"])
-		details(["status", "acceleration", "temperature", "battery", "refresh"])
-	}
-}
-
-def parse(String description) {
-	Map map = [:]
-	if (description?.startsWith('catchall:')) {
-		map = parseCatchAllMessage(description)
-	}
-	else if (description?.startsWith('temperature: ')) {
-		map = parseCustomMessage(description)
-	}
-	else if (description?.startsWith('zone status')) {
-		map = parseIasMessage(description)
-	}
-
-	def result = map ? createEvent(map) : null
-
-	if (description?.startsWith('enroll request')) {
-		List cmds = enrollResponse()
-		log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
-	else if (description?.startsWith('read attr -')) {
-		result = parseReportAttributeMessage(description).each { createEvent(it) }
-	}
-	return result
-}
-
-private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
-	def cluster = zigbee.parse(description)
-	log.debug cluster
-	if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
-			case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
-				break
-
-			case 0xFC02:
-				log.debug 'ACCELERATION'
-				break
-
-			case 0x0402:
-				if (cluster.command == 0x07) {
-					if(cluster.data[0] == 0x00) {
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
-				break
-		}
-	}
-
-	return resultMap
-}
-
-private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
-			cluster.command == 0x0B ||
-			(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
-}
-
-private List parseReportAttributeMessage(String description) {
-	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-	}
-
-	List result = []
-	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
-		def value = getTemperature(descMap.value)
-		result << getTemperatureResult(value)
-	}
-	else if (descMap.cluster == "FC02" && descMap.attrId == "0010") {
-		if (descMap.value.size() == 32) {
-			// value will look like 00ae29001403e2290013001629001201
-			// breaking this apart and swapping byte order where appropriate, this breaks down to:
-			//   X (0x0012) = 0x0016
-			//   Y (0x0013) = 0x03E2
-			//   Z (0x0014) = 0x00AE
-			// note that there is a known bug in that the x,y,z attributes are interpreted in the wrong order
-			// this will be fixed in a future update
-			def threeAxisAttributes = descMap.value[0..-9]
-			result << parseAxis(threeAxisAttributes)
-			descMap.value = descMap.value[-2..-1]
-		}
-		result << getAccelerationResult(descMap.value)
-	}
-	else if (descMap.cluster == "FC02" && descMap.attrId == "0012" && descMap.value.size() == 24) {
-		// The size is checked to ensure the attribute report contains X, Y and Z values
-		// If all three axis are not included then the attribute report is ignored
-		result << parseAxis(descMap.value)
-	}
-	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
-	}
-
-	return result
-}
-
-private Map parseCustomMessage(String description) {
-	Map resultMap = [:]
-	if (description?.startsWith('temperature: ')) {
-		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
-		resultMap = getTemperatureResult(value)
-	}
-	return resultMap
-}
-
-private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
-	Map resultMap = [:]
-
-	if (garageSensor != "Yes"){
-		resultMap = zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
-	}
-
-	return resultMap
-}
-
-def updated() {
-	log.debug "updated called"
-	log.info "garage value : $garageSensor"
-	if (garageSensor == "Yes") {
-		def descriptionText = "Updating device to garage sensor"
-		if (device.latestValue("status") == "open") {
-			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText, translatable: true)
-		}
-		else if (device.latestValue("status") == "closed") {
-			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText, translatable: true)
-		}
-	}
-	else {
-		def descriptionText = "Updating device to open/close sensor"
-		if (device.latestValue("status") == "garage-open") {
-			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText, translatable: true)
-		}
-		else if (device.latestValue("status") == "garage-closed") {
-			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText, translatable: true)
-		}
-	}
-}
-
-def getTemperature(value) {
-	def celsius = Integer.parseInt(value, 16).shortValue() / 100
-	if(getTemperatureScale() == "C"){
-		return Math.round(celsius)
-	} else {
-		return Math.round(celsiusToFahrenheit(celsius))
-	}
-}
-
-private Map getBatteryResult(rawValue) {
-	log.debug 'Battery'
-	def linkText = getLinkText(device)
-
-	def result = [:]
-
-	def volts = rawValue / 10
-
-	if (!(rawValue == 0 || rawValue == 255)) {
-		def minVolts = 2.1
-		def maxVolts = 3.0
-		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		if (roundedPct <= 0)
-			roundedPct = 1
-		result.name = 'battery'
-		result.value = Math.min(100, roundedPct)
-		result.descriptionText = "${linkText} battery was ${result.value}%"
-
-	}
-
-	return result
-}
-
-private Map getTemperatureResult(value) {
-	log.debug "Temperature"
-	if (tempOffset) {
-		def offset = tempOffset as int
-		def v = value as int
-		value = v + offset
-	}
-	def descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C':
-			'{{ device.displayName }} was {{ value }}°F'
-
-	return [
-			name: 'temperature',
-			value: value,
-			descriptionText: descriptionText,
-			translatable: true,
-			unit: temperatureScale
-	]
-}
-
-private Map getContactResult(value) {
-	log.debug "Contact: ${device.displayName} value = ${value}"
-	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
-	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
-	sendEvent(name: 'status', value: value, descriptionText: descriptionText, translatable: true)
-}
-
-private getAccelerationResult(numValue) {
-	log.debug "Acceleration"
-	def name = "acceleration"
-	def value
-	def descriptionText
-
-	if ( numValue.endsWith("1") ) {
-		value = "active"
-		descriptionText = '{{ device.displayName }} was active'
-	} else {
-		value = "inactive"
-		descriptionText = '{{ device.displayName }} was inactive'
-	}
-
-	def isStateChange = isStateChange(device, name, value)
-	return [
-			name: name,
-			value: value,
-			descriptionText: descriptionText,
-			isStateChange: isStateChange,
-			translatable: true
-	]
-}
-
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-}
-
-def refresh() {
-	log.debug "Refreshing Values "
-
-	def refreshCmds = []
-
-	if (device.getDataValue("manufacturer") == "SmartThings") {
-		log.debug "Refreshing Values for manufacturer: SmartThings "
-		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
-            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
-            Separating these out in a separate if-else because I do not want to touch Centralite part
-            as of now.
-        */
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
-	} else {
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
-	}
-
-	//Common refresh commands
-	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
-			zigbee.readAttribute(0x0001, 0x0020) +
-			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
-
-	return refreshCmds + enrollResponse()
-}
-
-def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
-	log.debug "Configuring Reporting"
-
-	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	def configCmds = zigbee.batteryConfig() +
-			zigbee.temperatureConfig(30, 300) +
-			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
-
-	return refresh() + configCmds
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-def enrollResponse() {
-	log.debug "Sending enroll response"
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	[
-			//Resending the CIE in case the enroll request is sent before CIE is written
-			"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-			//Enroll Response
-			"raw 0x500 {01 23 00 00 00}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 200"
-	]
-}
-
-private Map parseAxis(String description) {
-	def z = hexToSignedInt(description[0..3])
-	def y = hexToSignedInt(description[10..13])
-	def x = hexToSignedInt(description[20..23])
-	def xyzResults = [x: x, y: y, z: z]
-
-	if (device.getDataValue("manufacturer") == "SmartThings") {
-		// This mapping matches the current behavior of the Device Handler for the Centralite sensors
-		xyzResults.x = z
-		xyzResults.y = y
-		xyzResults.z = -x
-	} else {
-		// The axises reported by the Device Handler differ from the axises reported by the sensor
-		// This may change in the future
-		xyzResults.x = z
-		xyzResults.y = x
-		xyzResults.z = y
-	}
-
-	log.debug "parseAxis -- ${xyzResults}"
-
-	if (garageSensor == "Yes")
-		garageEvent(xyzResults.z)
-
-	getXyzResult(xyzResults, description)
-}
-
-private hexToSignedInt(hexVal) {
-	def unsignedVal = hexToInt(hexVal)
-	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
-}
-
-def garageEvent(zValue) {
-	def absValue = zValue.abs()
-	def contactValue = null
-	def garageValue = null
-	if (absValue>900) {
-		contactValue = 'closed'
-		garageValue = 'garage-closed'
-	}
-	else if (absValue < 100) {
-		contactValue = 'open'
-		garageValue = 'garage-open'
-	}
-	if (contactValue != null){
-		def descriptionText = contactValue == 'open' ? '{{ device.displayName }} was opened' :'{{ device.displayName }} was closed'
-		sendEvent(name: 'contact', value: contactValue, descriptionText: descriptionText, displayed:false, translatable: true)
-		sendEvent(name: 'status', value: garageValue, descriptionText: descriptionText, translatable: true)
-	}
-}
-
-private Map getXyzResult(results, description) {
-	def name = "threeAxis"
-	def value = "${results.x},${results.y},${results.z}"
-	def linkText = getLinkText(device)
-	def descriptionText = "$linkText was $value"
-	def isStateChange = isStateChange(device, name, value)
-
-	[
-			name: name,
-			value: value,
-			unit: null,
-			linkText: linkText,
-			descriptionText: descriptionText,
-			handlerName: name,
-			isStateChange: isStateChange,
-			displayed: false
-	]
-}
-
-private getManufacturerCode() {
-	if (device.getDataValue("manufacturer") == "SmartThings") {
-		return "0x110A"
-	} else {
-		return "0x104E"
-	}
-}
-
-private hexToInt(value) {
-	new BigInteger(value, 16)
-}
-
-private hex(value) {
-	new BigInteger(Math.round(value).toString()).toString(16)
-}
-
-private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-	int i = 0;
-	int j = array.length - 1;
-	byte tmp;
-	while (j > i) {
-		tmp = array[j];
-		array[j] = array[i];
-		array[i] = tmp;
-		j--;
-		i++;
-	}
-	return array
-}

devicetypes/smartthings/smartsense-open-closed-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Smartsense Open/Closed Sensor
 
-
+Local Execution on V2 Hubs
 
 Works with: 
 
@@ -24,10 +24,11 @@ Works with:
 
 ## Device Health
 
-A Category C2 open/closed sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+SmartSense Open Closed sensor with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
+* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -119,7 +119,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07){
 					if (cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
@@ -252,17 +252,17 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
-        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
 	]
 
 	return refreshCmds + enrollResponse()
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
 	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 
@@ -277,10 +277,10 @@ def enrollResponse() {
 	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+		"raw 0x500 {01 23 00 00 00}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
 	]
 }
 

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/README.md

@@ -1,6 +1,6 @@
 # SmartSense Temp/Humidity Sensor
 
-
+Local Execution on V2 Hubs
 
 Works with: 
 
@@ -24,10 +24,11 @@ Works with:
 
 ## Device Health
 
-A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+SmartSense Temp/Humidity Sensor with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
+* HubV2 AppEngine 1.5.1 - __12min__ checkIntervalr 5 min interval is confirmed
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -103,7 +103,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00){
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
@@ -264,15 +264,15 @@ def refresh()
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
 	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting and Bindings."
 	def humidityConfigCmds = [
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 2000",
+		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
 	]
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity

devicetypes/smartthings/testing/simulated-minimote.src/simulated-minimote.groovy

@@ -15,9 +15,10 @@ metadata {
 	definition (name: "Simulated Minimote", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Actuator"
 		capability "Button"
+		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
-        
+
         command "push1"
         command "push2"
         command "push3"
@@ -45,42 +46,42 @@ metadata {
 		}
  		standardTile("push1", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Push 1", backgroundColor: "#ffffff", action: "push1"
-		} 
+		}
  		standardTile("push2", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Push 2", backgroundColor: "#ffffff", action: "push2"
-		} 
+		}
  		standardTile("push3", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Push 3", backgroundColor: "#ffffff", action: "push3"
-		} 
+		}
  		standardTile("push4", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Push 4", backgroundColor: "#ffffff", action: "push4"
-		} 
+		}
  		standardTile("dummy1", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: " ", backgroundColor: "#ffffff", action: "push4"
-		}         
+		}
  		standardTile("hold1", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Hold 1", backgroundColor: "#ffffff", action: "hold1"
-		}          
+		}
  		standardTile("hold2", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Hold 2", backgroundColor: "#ffffff", action: "hold2"
-		}          
+		}
  		standardTile("dummy2", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: " ", backgroundColor: "#ffffff", action: "push4"
-		}         
+		}
  		standardTile("hold3", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Hold 3", backgroundColor: "#ffffff", action: "hold3"
-		}          
+		}
  		standardTile("hold4", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Hold 4", backgroundColor: "#ffffff", action: "hold4"
-		}          
-        
+		}
+
 		main "button"
 		details(["push1","push2","button","push3","push4","dummy1","hold1","hold2","dummy2","hold3","hold4"])
 	}
 }
 
 def parse(String description) {
-	
+
 }
 
 def push1() {
@@ -125,3 +126,15 @@ private hold(button) {
 	sendEvent(name: "button", value: "held", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was held", isStateChange: true)
 }
 
+
+def installed() {
+	initialize()
+}
+
+def updated() {
+	initialize()
+}
+
+def initialize() {
+	sendEvent(name: "numberOfButtons", value: 4)
+}

devicetypes/smartthings/tyco-door-window-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Tyco Door Window Sensor
 
-
+Cloud Execution
 
 Works with: 
 
@@ -23,10 +23,11 @@ Works with:
 
 ## Device Health
 
-Contact sensor with maxReportTime of 5 mins.
+Tyco Door Window Sensor with reporting interval of 5 mins.
 Check-in interval is double the value of maxReportTime for Zigbee device. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 min
+
+* __12min__ checkInterval
 
 ## Battery Specification
 

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -86,7 +86,7 @@ def parse(String description) {
 	def bodyString = msg.body
 	if (bodyString) {
 		unschedule("setOffline")
-		def body = new XmlSlurper().parseText(bodyString)
+        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))
 
 		if (body?.property?.TimeSyncRequest?.text()) {
 			log.trace "Got TimeSyncRequest"

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -78,7 +78,7 @@ def parse(String description) {
 	def bodyString = msg.body
 	if (bodyString) {
     	unschedule("setOffline")
-		def body = new XmlSlurper().parseText(bodyString)
+        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))
 		if (body?.property?.TimeSyncRequest?.text()) {
 			log.trace "Got TimeSyncRequest"
 			result << timeSyncResponse()

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -84,7 +84,7 @@ def parse(String description) {
     def bodyString = msg.body
     if (bodyString) {
     	unschedule("setOffline")
-        def body = new XmlSlurper().parseText(bodyString)
+        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))
  		if (body?.property?.TimeSyncRequest?.text()) {
         	log.trace "Got TimeSyncRequest"
         	result << timeSyncResponse()
@@ -208,7 +208,7 @@ def subscribe(ip, port) {
     def existingIp = getDataValue("ip")
     def existingPort = getDataValue("port")
     if (ip && ip != existingIp) {
-         log.debug "Updating ip from $existingIp to $ip"    
+         log.debug "Updating ip from $existingIp to $ip"
     	 updateDataValue("ip", ip)
     	 def ipvalue = convertHexToIP(getDataValue("ip"))
          sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
@@ -291,4 +291,4 @@ User-Agent: CyberGarage-HTTP/1.0
 </u:GetBinaryState>
 </s:Body>
 </s:Envelope>""", physicalgraph.device.Protocol.LAN)
-}
+}

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -19,6 +19,7 @@ metadata {
         capability "Actuator"
         capability "Battery"
         capability "Button"
+        capability "Holdable Button"        
         capability "Configuration"
         capability "Refresh"
         capability "Sensor"
@@ -27,8 +28,8 @@ metadata {
 
         fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
         //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
-        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
-        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
+        fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
+        fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
     }
 
     simulator {}

devicetypes/smartthings/zigbee-dimmer-power.src/README.md

@@ -1,6 +1,6 @@
 # GE Plug-In/In-Wall Smart Dimmer (ZigBee)
 
-
+Cloud Execution
 
 Works with:
 
@@ -26,11 +26,11 @@ Works with:
 
 ## Device Health
 
-A Zigbee dimmer with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime.
-This gives the device twice the amount of time to respond before it is marked as offline.
-Enrolls with default periodic reporting until newer 5 min interval is confirmed
-It then enrolls the device with updated checkInterval i.e. 12 mins
+A Zigbee Power Dimmer with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* __12min__ checkInterval
+
 
 ## Troubleshooting
 

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -114,8 +114,8 @@ def refresh() {
 def configure() {
     log.debug "Configuring Reporting and Bindings."
 
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     refresh()
 }

devicetypes/smartthings/zigbee-dimmer.src/README.md

@@ -1,6 +1,6 @@
 # Zigbee Dimmer
 
-
+Cloud Execution
 
 Works with: 
 
@@ -24,11 +24,11 @@ Works with:
 
 ## Device Health
 
-A Zigbee dimmer with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime.
-This gives the device twice the amount of time to respond before it is marked as offline.
-Enrolls with default periodic reporting until newer 5 min interval is confirmed
-It then enrolls the device with updated checkInterval i.e. 12 mins
+ZigBee Dimmer with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+* __12min__ checkInterval
+
 
 ## Troubleshooting
 

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -23,9 +23,11 @@ metadata {
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart A19 Soft White"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart BR30 Soft White"
     }
 
     tiles(scale: 2) {
@@ -102,9 +104,9 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()

devicetypes/smartthings/zigbee-hue-bulb.src/zigbee-hue-bulb.groovy

@@ -1,168 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-//@Deprecated - Moved to zll-rgbw-bulb
-
-/* Philips Hue (via Zigbee)
-
-Capabilities:
-  Actuator
-  Color Control
-  Configuration
-  Polling
-  Refresh
-  Sensor
-  Switch
-  Switch Level
-
-Custom Commands:
-  setAdjustedColor
-
-*/
-
-metadata {
-	definition (name: "Zigbee Hue Bulb", namespace: "smartthings", author: "SmartThings") {
-		capability "Switch Level"
-		capability "Actuator"
-		capability "Color Control"
-		capability "Switch"
-		capability "Configuration"
-		capability "Polling"
-		capability "Refresh"
-		capability "Sensor"
-
-		command "setAdjustedColor"
-
-		//fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000", outClusters: "0019"
-	}
-
-	// UI tile definitions
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-			tileAttribute ("device.color", key: "COLOR_CONTROL") {
-				attributeState "color", action:"color control.setColor"
-			}
-		}
-		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
-			state "colorTemperature", action:"color temperature.setColorTemperature"
-		}
-		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "colorTemperature", label: '${currentValue} K'
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main(["switch"])
-		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
-	}
-}
-
-//Globals
-private getATTRIBUTE_HUE() { 0x0000 }
-private getATTRIBUTE_SATURATION() { 0x0001 }
-private getHUE_COMMAND() { 0x00 }
-private getSATURATION_COMMAND() { 0x03 }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	log.debug "description is $description"
-
-	def finalResult = zigbee.getEvent(description)
-	if (finalResult) {
-		log.debug finalResult
-		sendEvent(finalResult)
-	}
-	else {
-		def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-		log.trace "zigbeeMap : $zigbeeMap"
-
-		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
-			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
-				sendEvent(name: "hue", value: hueValue, displayed:false)
-			}
-			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-				sendEvent(name: "saturation", value: saturationValue, displayed:false)
-			}
-		}
-		else {
-			log.info "DID NOT PARSE MESSAGE for description : $description"
-		}
-	}
-}
-
-def on() {
-	zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def off() {
-	zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def refresh() {
-	refreshAttributes() + configureAttributes()
-}
-
-def poll() {
-	refreshAttributes()
-}
-
-def configure() {
-	log.debug "Configuring Reporting and Bindings."
-	configureAttributes() + refreshAttributes()
-}
-
-def configureAttributes() {
-	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
-}
-
-def refreshAttributes() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
-}
-
-def setColorTemperature(value) {
-	zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
-}
-
-def setLevel(value) {
-	zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
-}
-
-def setColor(value){
-	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
-}
-
-def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
-}
-
-def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
-}

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -28,8 +28,8 @@ metadata {
 		capability "Switch Level"
 		capability "Health Check"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
 	}
 
 	// UI tile definitions

devicetypes/smartthings/zigbee-rgbw-bulb.src/README.md

@@ -1,6 +1,6 @@
 # OSRAM LIGHTIFY LED RGBW Bulb
 
-
+Cloud Execution
 
 Works with: 
 
@@ -27,11 +27,10 @@ Works with:
 
 ## Device Health
 
-A Category C6 OSRAM LIGHTIFY LED RGBW Bulb with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+OSRAM LIGHTIFY LED RGBW Bulb with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
 
+* __12min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -32,11 +32,12 @@ metadata {
         attribute "colorName", "string"
         command "setGenericName"
 
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED A19 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "OSRAM LIGHTIFY LED BR30 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "OSRAM LIGHTIFY LED RT 5/6 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "SYLVANIA Smart Flex RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "SYLVANIA Smart A19 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "SYLVANIA Smart BR30 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "SYLVANIA Smart RT5/6 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY FLEX OUTDOOR RGBW", deviceJoinName: "SYLVANIA Smart Outdoor RGBW Flex"
     }
 
     // UI tile definitions
@@ -143,9 +144,9 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     refresh()

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/README.md

@@ -1,6 +1,6 @@
 # ZigBee White Color Temperature Bulb
 
-
+Cloud Execution
 
 Works with: 
 
@@ -25,11 +25,10 @@ Works with:
 
 ## Device Health
 
-Zigbee Bulb with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime.
-This gives the device twice the amount of time to respond before it is marked as offline.
-Enrolls with default periodic reporting until newer 5 min interval is confirmed
-It then enrolls the device with updated checkInterval i.e. 12 mins
+Zigbee Bulb with reporting interval of 5 mins.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+
+*__12min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -32,11 +32,12 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04", outClusters: "0019"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Flood BR30 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY RT5/6 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "SYLVANIA Smart BR30 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "SYLVANIA Smart RT5/6 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "SYLVANIA Smart A19 Tunable White"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "Z01-A19NAE26", deviceJoinName: "Sengled Element plus"
     }
 
     // UI tile definitions
@@ -83,105 +84,24 @@ def parse(String description) {
         }
     }
     else {
-        Map bindingTable = parseBindingTableResponse(description)
-        if (bindingTable) {
-            List<String> cmds = []
-            bindingTable.table_entries.inject(cmds) { acc, entry ->
-                // The binding entry is not for our hub and should be deleted
-                if (entry["dstAddr"] != zigbeeEui) {
-                    acc.addAll(removeBinding(entry.clusterId, entry.srcAddr, entry.srcEndpoint, entry.dstAddr, entry.dstEndpoint))
-                }
-                acc
-            }
-            // There are more entries that we haven't examined yet
-            if (bindingTable.numTableEntries > bindingTable.startIndex + bindingTable.numEntriesReturned) {
-                def startPos
-                if (cmds) {
-                    log.warn "Removing binding entries for other devices: $cmds"
-                    // Since we are removing some entries, we should start in the same spot as we just read since values
-                    // will fill in the newly vacated spots
-                    startPos = bindingTable.startIndex
-                } else {
-                    // Since we aren't removing anything we move forward to the next set of table entries
-                    startPos = bindingTable.startIndex + bindingTable.numEntriesReturned
-                }
-                cmds.addAll(requestBindingTable(startPos))
-            }
-            sendHubCommand(cmds.collect { it ->
-                new physicalgraph.device.HubAction(it)
-            }, 2000)
-        } else {
-            def cluster = zigbee.parse(description)
+        def cluster = zigbee.parse(description)
 
-            if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-                if (cluster.data[0] == 0x00) {
-                    log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-                }
-                else {
-                    log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-                }
+        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+            if (cluster.data[0] == 0x00) {
+                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
+                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
             }
             else {
-                log.warn "DID NOT PARSE MESSAGE for description : $description"
-                log.debug "${cluster}"
+                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
             }
         }
+        else {
+            log.warn "DID NOT PARSE MESSAGE for description : $description"
+            log.debug "${cluster}"
+        }
     }
 }
 
-def parseBindingTableResponse(description) {
-    Map descMap = zigbee.parseDescriptionAsMap(description)
-    if (descMap["clusterInt"] == 0x8033) {
-        def header_field_lengths = ["transactionSeqNo": 1, "status": 1, "numTableEntries": 1, "startIndex": 1, "numEntriesReturned": 1]
-        def field_values = [:]
-        def data = descMap["data"]
-        header_field_lengths.each { k, v ->
-            field_values[k] = Integer.parseInt(data.take(v).join(""), 16);
-            data = data.drop(v);
-        }
-
-        List<Map> table = []
-        if (field_values.numEntriesReturned) {
-            def table_entry_lengths = ["srcAddr": 8, "srcEndpoint": 1, "clusterId": 2, "dstAddrMode": 1]
-            for (def i : 0..(field_values.numEntriesReturned - 1)) {
-                def entryMap = [:]
-                table_entry_lengths.each { k, v ->
-                    def val = data.take(v).reverse().join("")
-                    entryMap[k] = val.length() < 8 ? Integer.parseInt(val, 16) : val
-                    data = data.drop(v)
-                }
-
-                switch (entryMap.dstAddrMode) {
-                    case 0x01:
-                        entryMap["dstAddr"] = data.take(2).reverse().join("")
-                        data = data.drop(2)
-                        break
-                    case 0x03:
-                        entryMap["dstAddr"] = data.take(8).reverse().join("")
-                        data = data.drop(8)
-                        entryMap["dstEndpoint"] = Integer.parseInt(data.take(1).join(""), 16)
-                        data = data.drop(1)
-                        break
-                }
-                table << entryMap
-            }
-        }
-        field_values["table_entries"] = table
-        return field_values
-    }
-    return [:]
-}
-
-def requestBindingTable(startPos=0) {
-    return ["zdo mgmt-bind 0x${zigbee.deviceNetworkId} $startPos"]
-}
-
-def removeBinding(cluster, srcAddr, srcEndpoint, destAddr, destEndpoint) {
-    return ["zdo unbind unicast 0x${zigbee.deviceNetworkId} {${srcAddr}} $srcEndpoint $cluster {${destAddr}} $destEndpoint"]
-}
-
-
 def off() {
     zigbee.off()
 }
@@ -207,11 +127,12 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
-    refresh() + requestBindingTable(0) + ["delay 2000"]
+    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    refresh()
 }
 
 def setColorTemperature(value) {

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -127,8 +127,8 @@ def configureHealthCheck() {
 
 def configure() {
     log.debug "configure()"
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
     configureHealthCheck()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }
 
 def updated() {

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -27,6 +27,10 @@ metadata {
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 RGBW"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "PAR 16 50 RGBW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY RGBW PAR 16 50"
+        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
+        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenpole RGBW-Lightify", deviceJoinName: "OSRAM LIGHTIFY Gardenpole RGBW"
+        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Outdoor Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Outdoor Flex RGBW"
     }
 
     // UI tile definitions

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -32,6 +32,7 @@ metadata {
 
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"PAR16 50 TW", deviceJoinName: "OSRAM LIGHTIFY LED PAR16 50 Tunable White"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
     }
 
     // UI tile definitions

devicetypes/smartthings/zwave-dimmer-switch-generic.src/README.md

@@ -1,6 +1,6 @@
-# Z-wave Dimmer
-
+# Z-wave Dimmer Switch Generic
 
+Cloud Execution
 
 Works with: 
 
@@ -32,6 +32,8 @@ Not to mention after going OFFLINE when the device is plugged back in, it might
 the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
 it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
 
+* __32min__ checkInterval
+
 ## Troubleshooting
 
 If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -24,6 +24,10 @@ metadata {
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1B03", model:"0334", deviceJoinName: "Leviton Universal Dimmer"
+		fingerprint mfr:"011A", prod:"0102", model:"0201", deviceJoinName: "Enerwave In-Wall Dimmer"
+		fingerprint mfr:"001D", prod:"1001", model:"0334", deviceJoinName: "Leviton 3-Speed Fan Controller"
+		fingerprint mfr:"001D", prod:"0602", model:"0334", deviceJoinName: "Leviton Magnetic Low Voltage Dimmer"
+		fingerprint mfr:"001D", prod:"0401", model:"0334", deviceJoinName: "Leviton 600W Incandescent Dimmer"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -28,6 +28,7 @@ metadata {
 		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
 		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
 		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
+		fingerprint mfr: "0063", prod: "4953", model: "3133", deviceJoinName: "GE Smart Motion Sensor"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-relay.src/zwave-relay.groovy

@@ -81,7 +81,7 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport
 	def value = "when off"
 	if (cmd.configurationValue[0] == 1) {value = "when on"}
 	if (cmd.configurationValue[0] == 2) {value = "never"}
-	[name: "indicatorStatus", value: value, display: false]
+	[name: "indicatorStatus", value: value, displayed: false]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {

devicetypes/smartthings/zwave-switch-generic.src/README.md

@@ -1,6 +1,6 @@
 # Z-wave Switch
 
-
+Cloud Execution
 
 Works with: 
 
@@ -32,6 +32,8 @@ Not to mention after going OFFLINE when the device is plugged back in, it might
 the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
 it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
 
+* __32min__ checkInterval
+
 ## Troubleshooting
 
 If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -25,6 +25,9 @@ metadata {
 		fingerprint mfr:"0063", prod:"4F50", model:"3031", deviceJoinName: "GE Plug-in Outdoor Switch"
 		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
 		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
+		fingerprint mfr:"001D", prod:"0301", model:"0334", deviceJoinName: "Leviton 15A Switch"
+		fingerprint mfr:"011A", prod:"0101", model:"0102", deviceJoinName: "Enerwave On/Off Switch"
+		fingerprint mfr:"011A", prod:"0101", model:"0603", deviceJoinName: "Enerwave Duplex Receptacle"
 	}
 
 	// simulator metadata

devicetypes/smartthings/zwave-switch.src/README.md

@@ -1,5 +1,6 @@
 # Z-Wave Switch
 
+Local Execution on V2 Hubs
 
 Works with: 
 
@@ -34,6 +35,7 @@ Not to mention after going OFFLINE when the device is plugged back in, it might
 the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
 it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
 
+* __32min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -114,7 +114,7 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport
 	def value = "when off"
 	if (cmd.configurationValue[0] == 1) {value = "when on"}
 	if (cmd.configurationValue[0] == 2) {value = "never"}
-	[name: "indicatorStatus", value: value, display: false]
+	[name: "indicatorStatus", value: value, displayed: false]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
@@ -174,17 +174,17 @@ def refresh() {
 }
 
 void indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on", display: false)
+	sendEvent(name: "indicatorStatus", value: "when on", displayed: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off", display: false)
+	sendEvent(name: "indicatorStatus", value: "when off", displayed: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never", display: false)
+	sendEvent(name: "indicatorStatus", value: "never", displayed: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
 }
 

smartapps/michaelstruck/color-coordinator.src/color-coordinator.groovy

@@ -1,10 +1,11 @@
 /**
  * 	Color Coordinator 
- *  Version 1.1.0 - 11/9/16
+ *  Version 1.1.1 - 11/9/16
  *  By Michael Struck
  *
  *  1.0.0 - Initial release
  *  1.1.0 - Fixed issue where master can be part of slaves. This causes a loop that impacts SmartThings. 
+ *  1.1.1 - Fix NPE being thrown for slave/master inputs being empty.
  *
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
@@ -33,17 +34,17 @@ preferences {
 
 def mainPage() {
 	dynamicPage(name: "mainPage", title: "", install: true, uninstall: false) {
-		def masterInList = slaves.id.find{it==master.id}
+		def masterInList = slaves?.id?.find{it==master?.id}
         if (masterInList) {
         	section ("**WARNING**"){
             	paragraph "You have included the Master Light in the Slave Group. This will cause a loop in execution. Please remove this device from the Slave Group.", image: "https://raw.githubusercontent.com/MichaelStruck/SmartThingsPublic/master/img/caution.png"
             }
         }
         section("Master Light") {
-			input "master", "capability.colorControl", title: "Colored Light"
+			input "master", "capability.colorControl", title: "Colored Light", required: true
 		}
 		section("Lights that follow the master settings") {
-			input "slaves", "capability.colorControl", title: "Colored Lights",  multiple: true, required: false, submitOnChange: true
+			input "slaves", "capability.colorControl", title: "Colored Lights",  multiple: true, required: true, submitOnChange: true
 		}
     	section([mobileOnly:true], "Options") {
 			input "randomYes", "bool",title: "When Master Turned On, Randomize Color", defaultValue: false
@@ -81,40 +82,44 @@ def init() {
 }
 //-----------------------------------
 def onOffHandler(evt){
-	if (!slaves.id.find{it==master.id}){
-        if (master.currentValue("switch") == "on"){
-            if (randomYes) getRandomColorMaster()
-			else slaves?.on()
-        }
-        else {
-            slaves?.off()  
-        }
+	if (slaves && master) {
+		if (!slaves?.id.find{it==master?.id}){
+		if (master?.currentValue("switch") == "on"){
+		    if (randomYes) getRandomColorMaster()
+				else slaves?.on()
+		}
+		else {
+		    slaves?.off()  
+		}
+		}
 	}
 }
 
 def colorHandler(evt) {
-   	if (!slaves.id.find{it==master.id} && master.currentValue("switch") == "on"){
-		log.debug "Changing Slave units H,S,L"
-    	def dimLevel = master.currentValue("level")
-    	def hueLevel = master.currentValue("hue")
-    	def saturationLevel = master.currentValue("saturation")
-		def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
-    	slaves?.setColor(newValue)
-    	try {
-    		log.debug "Changing Slave color temp"
-        	def tempLevel = master.currentValue("colorTemperature")
-    		slaves?.setColorTemperature(tempLevel)
-    	}
-   		catch (e){
-    		log.debug "Color temp for master --"
-    	}
+	if (slaves && master) {
+		if (!slaves?.id?.find{it==master?.id} && master?.currentValue("switch") == "on"){
+			log.debug "Changing Slave units H,S,L"
+		def dimLevel = master?.currentValue("level")
+		def hueLevel = master?.currentValue("hue")
+		def saturationLevel = master.currentValue("saturation")
+			def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
+		slaves?.setColor(newValue)
+		try {
+			log.debug "Changing Slave color temp"
+			def tempLevel = master?.currentValue("colorTemperature")
+			slaves?.setColorTemperature(tempLevel)
+		}
+			catch (e){
+			log.debug "Color temp for master --"
+		}
+		}
 	}
 }
 
 def getRandomColorMaster(){
     def hueLevel = Math.floor(Math.random() *1000)
     def saturationLevel = Math.floor(Math.random() * 100)
-    def dimLevel = master.currentValue("level")
+    def dimLevel = master?.currentValue("level")
 	def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
     log.debug hueLevel
     log.debug saturationLevel
@@ -123,12 +128,14 @@ def getRandomColorMaster(){
 }
 
 def tempHandler(evt){
-    if (!slaves.id.find{it==master.id} && master.currentValue("switch") == "on"){
-        if (evt.value != "--") {
-            log.debug "Changing Slave color temp based on Master change"
-            def tempLevel = master.currentValue("colorTemperature")
-            slaves?.setColorTemperature(tempLevel)
-        }
+	if (slaves && master) {
+	    if (!slaves?.id?.find{it==master?.id} && master?.currentValue("switch") == "on"){
+		if (evt.value != "--") {
+		    log.debug "Changing Slave color temp based on Master change"
+		    def tempLevel = master.currentValue("colorTemperature")
+		    slaves?.setColorTemperature(tempLevel)
+		}
+		}
 	}
 }
 
@@ -139,7 +146,7 @@ private def textAppName() {
 }	
 
 private def textVersion() {
-    def text = "Version 1.1.0 (11/09/2016)"
+    def text = "Version 1.1.1 (12/13/2016)"
 }
 
 private def textCopyright() {
@@ -166,4 +173,4 @@ private def textHelp() {
     	"This application will allow you to control the settings of multiple colored lights with one control. " +
         "Simply choose a master control light, and then choose the lights that will follow the settings of the master, "+
         "including on/off conditions, hue, saturation, level and color temperature. Also includes a random color feature."
-}
+}

smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy

@@ -19,9 +19,9 @@
     author: "SmartThings",
     description: "Control your Bose SoundTouch speakers",
     category: "SmartThings Labs",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconUrl: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon.png",
+    iconX2Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x.png",
+    iconX3Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x-1.png",
     singleInstance: true
 )
 
@@ -104,7 +104,7 @@ def deviceDiscovery()
 
         return dynamicPage(name:"deviceDiscovery", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
             section("Please wait while we discover your ${getDeviceName()}. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices
+                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices, submitOnChange: true
             }
         }
     }
@@ -196,6 +196,8 @@ def addDevice(){
             d = addChildDevice(getNameSpace(), getDeviceName(), dni, newDevice?.value.hub, [label:"${deviceName}"])
             d.boseSetDeviceID(newDevice.value.deviceID)
             log.trace "Created ${d.displayName} with id $dni"
+            // sync DTH with device, done here as it currently don't work from the DTH's installed() method
+            d.refresh()
         } else {
             log.trace "${d.displayName} with id $dni already exists"
         }

smartapps/smartthings/life360-connect.src/life360-connect.groovy

@@ -289,12 +289,12 @@ def initializeLife360Connection() {
        		state.life360AccessToken = result.data.access_token
             return true;
    		}
-		log.debug "Response=${result.data}"
+		log.info "Life360 initializeLife360Connection, response=${result.data}"
         return false;
         
     }
     catch (e) {
-       log.debug e
+       log.error "Life360 initializeLife360Connection, error: $e"
        return false;
     }
 
@@ -656,7 +656,7 @@ def generateInitialEvent (member, childDevice) {
     
     try { // we are going to just ignore any errors
     
-    	log.debug "Generate Initial Event for New Device for Member = ${member.id}"
+    	log.info "Life360 generateInitialEvent($member, $childDevice)"
         
         def place = state.places.find{it.id==settings.place}
         
@@ -677,6 +677,8 @@ def generateInitialEvent (member, childDevice) {
         	// log.debug "Distance Away = ${distanceAway}"
   
   			boolean isPresent = (distanceAway <= placeRadius)
+
+			log.info "Life360 generateInitialEvent, member: ($memberLatitude, $memberLongitude), place: ($placeLatitude, $placeLongitude), radius: $placeRadius, dist: $distanceAway, present: $isPresent"
                 
         	// log.debug "External Id=${app.id}:${member.id}"
         
@@ -718,7 +720,7 @@ def haversine(lat1, lon1, lat2, lon2) {
 
 def placeEventHandler() {
 
-	log.debug "In placeEventHandler method."
+	log.info "Life360 placeEventHandler: params=$params, settings.place=$settings.place"
 
 	// the POST to this end-point will look like:
     // POST http://test.com/webhook?circleId=XXXX&placeId=XXXX&userId=XXXX&direction=arrive
@@ -729,8 +731,6 @@ def placeEventHandler() {
     def direction = params?.direction
     def timestamp = params?.timestamp
     
-    log.debug "Life360 Event: Circle: ${circleId}, Place: ${placeId}, User: ${userId}, Direction: ${direction}"
-
     if (placeId == settings.place) {
 
 		def presenceState = (direction=="in")
@@ -745,10 +745,10 @@ def placeEventHandler() {
 
 		if (deviceWrapper) {
 			deviceWrapper.generatePresenceEvent(presenceState)
-    		log.debug "Event raised on child device: ${externalId}"
+    		log.debug "Life360 event raised on child device: ${externalId}"
 		}
    		else {
-    		log.debug "Couldn't find child device associated with inbound Life360 event."
+    		log.warn "Life360 couldn't find child device associated with inbound Life360 event."
     	}
     }
 

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -516,7 +516,7 @@ def pollResponse(response, data) {
               def hub = getChildDevice("harmony-${it.key}")
               if (hub) {
                   if (it.value.response.data.currentAvActivity == "-1") {
-                      hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
+                      hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", displayed: false)
                   } else {
                       def currentActivity
                       def activityDTH = getChildDevice("harmony-${it.key}-${it.value.response.data.currentAvActivity}")
@@ -524,7 +524,7 @@ def pollResponse(response, data) {
                         currentActivity = activityDTH.device.displayName
                       else
                         currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
-                      hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
+                      hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", displayed: false)
                   }
               }
           } else {
@@ -576,7 +576,7 @@ def getActivityList() {
                             }
                             activities += [id: "off", name: "Activity OFF", type: "0"]
                         }
-                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
+                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", displayed: false)
 					          }
                 }
             }