Merge pull request #1131 from jackchi/healthcheck-core

[CHF-201] [CHF-206] Health Check Core Devices

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,7 +22,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -328,9 +327,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device user configured or default 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2* (timeOptionValueMap[reportInterval] ?: (2*8*60)), displayed: false)
-
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
 	def request = []

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		command "configureAfterSecure"
 
@@ -248,8 +247,6 @@ def configureAfterSecure() {
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
-	// allow device 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*8*60, displayed: false)
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -181,9 +180,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device 10 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*5*60, displayed: false)
-
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
 		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2).format(),

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -23,6 +23,7 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
 
         fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
     }
@@ -66,6 +67,12 @@ def parse(String description) {
     def resultMap = zigbee.getEvent(description)
     if (resultMap) {
         sendEvent(resultMap)
+        // Temporary fix for the case when Device is OFFLINE and is connected again
+        if (state.lastActivity == null){
+            state.lastActivity = now()
+            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+        }
+        state.lastActivity = now()
     }
     else {
         log.debug "DID NOT PARSE MESSAGE for description : $description"
@@ -85,6 +92,21 @@ def setLevel(value) {
     zigbee.setLevel(value) + ["delay 500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+        state.lastActivity = null
+        return zigbee.levelRefresh()
+    } else {
+        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+    }
+}
+
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
@@ -95,5 +117,6 @@ def poll() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
+    sendEvent(name: "checkInterval", value: 1200, displayed: false, data: [protocol: "zigbee"])
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -102,11 +102,11 @@ def parse(String description) {
 			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
 			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
 			// Temporary fix for the case when Device is OFFLINE and is connected again
-			if (state.lastOnOff == null){
-				state.lastOnOff = now()
-				sendEvent(name: "deviceWatch-lastActivity", value: state.lastOnOff, description: "Last Activity is on ${new Date(state.lastOnOff)}", displayed: false, isStateChange: true)
+			if (state.lastActivity == null){
+				state.lastActivity = now()
+				sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
 			}
-			state.lastOnOff = now()
+			state.lastActivity = now()
 		}
 	}
 	else {
@@ -123,18 +123,17 @@ def on() {
 	zigbee.on()
 }
 /**
- * PING is used by Device-Watch in attempt to reach the Outlet
+ * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
 
-	// send read attribute onOFF if the last time we heard from the outlet is outside of the checkInterval
-	if (state.lastOnOff < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastOnOff=${new Date(state.lastOnOff)}"
-		state.lastOnOff = null
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
 		return zigbee.onOffRefresh()
-	} else { // if the last onOff activity is within the checkInterval we artificially create a Device-Watch event
-		log.info "ping, alive=yes, lastOnOff=${new Date(state.lastOnOff)}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastOnOff, description: "Last Activity is on ${new Date(state.lastOnOff)}", displayed: false, isStateChange: true)
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
 	}
 }
 
@@ -143,7 +142,7 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 1200, displayed: false)
+	sendEvent(name: "checkInterval", value: 1200, displayed: false, data: [protocol: "zigbee"])
 	zigbee.onOffConfig() + powerConfig() + refresh()
 }
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -101,6 +101,13 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -271,6 +278,21 @@ private Map getMoistureResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+}
+
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
@@ -282,7 +304,7 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	sendEvent(name: "checkInterval", value: 7200, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -105,6 +105,13 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -282,6 +289,21 @@ private Map getMotionResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else { 
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+}
+
 def refresh() {
 	log.debug "refresh called"
 	def refreshCmds = [
@@ -293,7 +315,7 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	sendEvent(name: "checkInterval", value: 7200, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -127,6 +127,13 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	def result = map ? createEvent(map) : null
 
 	if (description?.startsWith('enroll request')) {
@@ -228,9 +235,9 @@ private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 	Map resultMap = [:]
 
-	if(garageSensor !=  "Yes") {
+			if (garageSensor != "Yes"){
 		resultMap = zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
-	}
+			}
 
 	return resultMap
 }
@@ -364,6 +371,21 @@ private getAccelerationResult(numValue) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+}
+
 def refresh() {
 	log.debug "Refreshing Values "
 
@@ -391,7 +413,7 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	sendEvent(name: "checkInterval", value: 7200, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting"
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -92,6 +92,13 @@ def parse(String description) {
     	map = parseIasMessage(description)
     }
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -234,6 +241,21 @@ private Map getContactResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+}
+
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
@@ -245,7 +267,7 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	sendEvent(name: "checkInterval", value: 7200, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -83,6 +83,13 @@ def parse(String description) {
 		map = parseCustomMessage(description)
 	}
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	log.debug "Parse returned $map"
 	return map ? createEvent(map) : null
 }
@@ -239,6 +246,20 @@ private Map getHumidityResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+}
+
 def refresh()
 {
 	log.debug "refresh temperature, humidity, and battery"
@@ -254,7 +275,7 @@ def refresh()
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	sendEvent(name: "checkInterval", value: 7200, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [

smartapps/docwisdom/humidity-alert.src/humidity-alert.groovy

@@ -78,7 +78,7 @@ def humidityHandler(evt) {
 			log.debug "Notification already sent within the last ${deltaMinutes} minutes"
 			
 		} else {
-			log.debug "Humidity Rose Above ${tooHumid}:  sending SMS to $phone1 and activating ${mySwitch}"
+			log.debug "Humidity Rose Above ${tooHumid}:  sending SMS and activating ${mySwitch}"
 			send("${humiditySensor1.label} sensed high humidity level of ${evt.value}")
 			switch1?.on()
 		}
@@ -91,7 +91,7 @@ def humidityHandler(evt) {
 			log.debug "Notification already sent within the last ${deltaMinutes} minutes"
 			
 		} else {
-			log.debug "Humidity Fell Below ${notHumidEnough}:  sending SMS to $phone1 and activating ${mySwitch}"
+			log.debug "Humidity Fell Below ${notHumidEnough}:  sending SMS and activating ${mySwitch}"
 			send("${humiditySensor1.label} sensed high humidity level of ${evt.value}")
 			switch1?.off()
 		}

smartapps/dooglave/let-there-be-dark.src/let-there-be-dark.groovy

@@ -25,15 +25,11 @@ preferences {
 
 def installed() {
 	subscribe(contact1, "contact", contactHandler)
-	subscribe(switch1, "switch.on", switchOnHandler)
-    subscribe(switch1, "switch.off", switchOffHandler)
 }
 
 def updated() {
 	unsubscribe()
 	subscribe(contact1, "contact", contactHandler)
-	subscribe(switch1, "switch.on", switchOnHandler)
-    subscribe(switch1, "switch.off", switchOffHandler)
 }
 
 def contactHandler(evt) {
@@ -46,4 +42,4 @@ def contactHandler(evt) {
 if (evt.value == "closed") {
 	if(state.wasOn)switch1.on()
 }
-}
+}

smartapps/mangioneimagery/medicine-management-contact-sensor.src/medicine-management-contact-sensor.groovy

@@ -0,0 +1,188 @@
+/**
+ *  Medicine Management - Contact Sensor
+ *
+ *  Copyright 2016 Jim Mangione
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ * 
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ * Logic: 
+ * --- Send notification at the medicine reminder time IF draw wasn't alread opened in past 60 minutes
+ * --- If draw still isn't open 10 minutes AFTER reminder time, LED will turn RED.
+ * --- ----- Once draw IS open, LED will return back to it's original color
+ *
+ */
+import groovy.time.TimeCategory 
+
+definition(
+    name: "Medicine Management - Contact Sensor",
+    namespace: "MangioneImagery",
+    author: "Jim Mangione",
+    description: "This supports devices with capabilities of ContactSensor and ColorControl (LED). It sends an in-app and ambient light notification if you forget to open the drawer or cabinet where meds are stored. A reminder will be set to a single time per day. If the draw or cabinet isn't opened within 60 minutes of that reminder, an in-app message will be sent. If the draw or cabinet still isn't opened after an additional 10 minutes, then an LED light turns red until the draw or cabinet is opened",
+    category: "Health & Wellness",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+
+	section("My Medicine Draw/Cabinet"){
+		input "deviceContactSensor", "capability.contactSensor", title: "Opened Sensor" 
+	} 
+
+    section("Remind me to take my medicine at"){
+        input "reminderTime", "time", title: "Time"
+    }
+    
+    // NOTE: Use REAL device - virtual device causes compilation errors
+    section("My LED Light"){
+    	input "deviceLight", "capability.colorControl", title: "Smart light"
+    }
+
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+        
+	initialize()
+}
+
+def initialize() {
+
+    // will stop LED notification incase it was set by med reminder
+    subscribe(deviceContactSensor, "contact", contactHandler)
+
+    // how many minutes to look in the past from the reminder time, for an open draw
+    state.minutesToCheckOpenDraw = 60
+    
+    // is true when LED notification is set after exceeding 10 minutes past reminder time
+    state.ledNotificationTriggered = false
+    
+    // Set a timer to run once a day to notify if draw wasn't opened yet
+    schedule(reminderTime, checkOpenDrawInPast)
+   
+}
+
+// Should turn off any LED notification on OPEN state
+def contactHandler(evt){
+	if (evt.value == "open") {
+        // if LED notification triggered, reset it.
+        log.debug "Cabinet opened"
+        if (state.ledNotificationTriggered) {
+            resetLEDNotification()
+        }
+	}
+}
+
+// If the draw was NOT opened within 60 minutes of the timer send notification out.
+def checkOpenDrawInPast(){
+	log.debug "Checking past 60 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 60 minutes for any OPENED status
+    def cabinetOpened = isOpened(state.minutesToCheckOpenDraw)
+	log.debug "Cabinet found opened: $cabinetOpened"
+    
+    // if it's opened, then do nothing and assume they took their meds
+    if (!cabinetOpened) {    
+    	sendNotification("Hi, please remember to take your meds in the cabinet")
+       
+       // if no open activity, send out notification and set new reminder    
+        def reminderTimePlus10 = new Date(now() + (10 * 60000))
+
+        // needs to be scheduled if draw wasn't already opened
+        runOnce(reminderTimePlus10, checkOpenDrawAfterReminder)
+    }
+}
+
+// If the draw was NOT opened after 10 minutes past reminder, use LED notification
+def checkOpenDrawAfterReminder(){
+	log.debug "Checking additional 10 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 10 minutes for any OPENED status
+    def cabinetOpened = isOpened(10)    
+    
+   	log.debug "Cabinet found opened: $cabinetOpened"
+        
+    // if no open activity, blink lights
+    if (!cabinetOpened) {
+    	log.debug "Set LED to Notification color"
+        setLEDNotification()
+    }
+    
+}
+
+// Helper function for sending out an app notification
+def sendNotification(msg){
+        log.debug "Message Sent: $msg"
+        sendPush(msg)
+}
+
+// Check if the sensor has been opened since the minutes entered
+// Return true if opened found, else false.
+def isOpened(minutes){
+    // query last X minutes of activity log    
+    def previousDateTime = new Date(now() - (minutes * 60000))
+    
+    // capture all events recorded
+    def evts = deviceContactSensor.eventsSince(previousDateTime)   
+    def cabinetOpened = false
+    if (evts.size() > 0) {
+        evts.each{
+            if(it.value == "open") {
+                cabinetOpened = true 
+            }
+        }
+	}
+    
+    return cabinetOpened
+}
+
+// Saves current color and sets the light to RED
+def setLEDNotification(){
+
+	state.ledNotificationTriggered = true
+    
+	// turn light back off when reset is called if it was originally off
+ 	state.ledState = deviceLight.currentValue("switch")
+
+	// set light to RED and store original color until stopped    
+    state.origColor = deviceLight.currentValue("hue")
+    deviceLight.on()
+    deviceLight.setHue(100)
+    
+    log.debug "LED set to RED. Original color stored: $state.origColor"
+
+}
+
+// Sets the color back to the original saved color
+def resetLEDNotification(){
+
+	state.ledNotificationTriggered = false
+    
+    // return color to original
+    log.debug "Reset LED color to: $state.origColor"
+    if (state.origColor != null) {
+    	deviceLight.setHue(state.origColor)
+    }
+    
+    // if the light was turned on just for the notification, turn it back off now
+    if (state.ledState == "off") {
+    	deviceLight.off()
+    }
+
+}

smartapps/mangioneimagery/medicine-management-temp-motion.src/medicine-management-temp-motion.groovy

@@ -0,0 +1,189 @@
+/**
+ *  Medicine Management - Temp-Motion
+ *
+ *  Copyright 2016 Jim Mangione
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ * 
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ * Logic: 
+ * --- If temp > threshold set, send notification
+ * --- Send in-app notification at the medicine reminder time if no motion is detected in past 60 minutes
+ * --- If motion still isn't detected 10 minutes AFTER reminder time, LED will turn RED
+ * --- ----- Once motion is detected, LED will turn back to it's original color
+ */
+import groovy.time.TimeCategory 
+
+definition(
+    name: "Medicine Management - Temp-Motion",
+    namespace: "MangioneImagery",
+    author: "Jim Mangione",
+    description: "This only supports devices with capabilities TemperatureMeasurement, AccelerationSensor and ColorControl (LED). Supports two use cases. First, will notifies via in-app if the fridge where meds are stored exceeds a temperature threshold set in degrees. Secondly, sends an in-app and ambient light notification if you forget to take your meds by sensing movement of the medicine box in the fridge. A reminder will be set to a single time per day. If the box isn't moved within 60 minutes of that reminder, an in-app message will be sent. If the box still isn't moved after an additional 10 minutes, then an LED light turns red until the box is moved",
+    category: "Health & Wellness",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+ 
+     section("My Medicine in the Refrigerator"){
+		input "deviceAccelerationSensor", "capability.accelerationSensor", required: true, multiple: false, title: "Movement"
+        input "deviceTemperatureMeasurement", "capability.temperatureMeasurement", required: true, multiple: false, title: "Temperature"
+	} 
+
+	section("Temperature Threshold"){
+    	input "tempThreshold", "number", title: "Temperature Threshold"
+    }
+
+    section("Remind me to take my medicine at"){
+        input "reminderTime", "time", title: "Time"
+    }
+    
+    // NOTE: Use REAL device - virtual device causes compilation errors
+    section("My LED Light"){
+    	input "deviceLight", "capability.colorControl", title: "Smart light"
+    }    
+
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+        
+	initialize()
+}
+
+def initialize() {
+	// will notify when temp exceeds max
+    subscribe(deviceTemperatureMeasurement, "temperature", tempHandler)
+
+    // will stop LED notification incase it was set by med reminder
+    subscribe(deviceAccelerationSensor, "acceleration.active", motionHandler)
+    
+    // how many minutes to look in the past from the reminder time
+    state.minutesToCheckPriorToReminder = 60
+    
+    // Set a timer to run once a day to notify if draw wasn't opened yet
+    schedule(reminderTime, checkMotionInPast)
+}
+
+
+// If temp > 39 then send an app notification out.
+def tempHandler(evt){
+	if (evt.doubleValue > tempThreshold) {
+    	log.debug "Fridge temp of $evt.value exceeded threshold"
+   		sendNotification("WARNING: Fridge temp is $evt.value with threshold of $tempThreshold")
+	}
+}
+
+// Should turn off any LED notification once motion detected
+def motionHandler(evt){
+    // always call out to stop any possible LED notification
+	log.debug "Medication moved. Send stop LED notification"
+    resetLEDNotification()
+}
+
+// If no motion detected within 60 minutes of the timer send notification out.
+def checkMotionInPast(){
+	log.debug "Checking past 60 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 60 minutes for any OPENED status
+    def movement = isMoved(state.minutesToCheckPriorToReminder)
+	log.debug "Motion found: $movement"
+    
+    // if there was movement, then do nothing and assume they took their meds
+    if (!movement) {    
+    	sendNotification("Hi, please remember to take your meds in the fridge")
+    
+        // if no movement, send out notification and set new reminder    
+        def reminderTimePlus10 = new Date(now() + (10 * 60000))
+
+        // needs to be scheduled if draw wasn't already opened
+        runOnce(reminderTimePlus10, checkMotionAfterReminder)
+    }
+}
+
+// If still no movement after 10 minutes past reminder, use LED notification
+def checkMotionAfterReminder(){
+	log.debug "Checking additional 10 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 10 minutes for any OPENED status
+    def movement = isMoved(10)    
+    
+   	log.debug "Motion found: $movement"
+        
+    // if no open activity, blink lights
+    if (!movement) {
+    	log.debug "Notify LED API"
+        setLEDNotification()
+    }
+    
+}
+
+// Helper function for sending out an app notification
+def sendNotification(msg){
+        log.debug "Message Sent: $msg"
+        sendPush(msg)
+}
+
+// Check if the accelerometer has been activated since the minutes entered
+// Return true if active, else false.
+def isMoved(minutes){
+    // query last X minutes of activity log    
+    def previousDateTime = new Date(now() - (minutes * 60000))
+    
+    // capture all events recorded
+    def evts = deviceAccelerationSensor.eventsSince(previousDateTime)   
+    def motion = false
+    if (evts.size() > 0) {
+        evts.each{
+            if(it.value == "active") {
+                motion = true 
+            }
+        }
+	}
+    
+    return motion
+}
+
+// Saves current color and sets the light to RED
+def setLEDNotification(){
+
+	// turn light back off when reset is called if it was originally off
+ 	state.ledState = deviceLight.currentValue("switch")
+
+	// set light to RED and store original color until stopped    
+    state.origColor = deviceLight.currentValue("hue")
+    deviceLight.on()
+    deviceLight.setHue(100)
+    
+    log.debug "LED set to RED. Original color stored: $state.origColor"
+
+}
+
+// Sets the color back to the original saved color
+def resetLEDNotification(){
+
+    // return color to original
+    log.debug "Reset LED color to: $state.origColor"
+    deviceLight.setHue(state.origColor)
+    
+    // if the light was turned on just for the notification, turn it back off now
+    if (state.ledState == "off") {
+    	deviceLight.off()
+    }
+}

smartapps/sheikhsphere/smart-humidifier.src/smart-humidifier.groovy

@@ -77,7 +77,7 @@ def humidityHandler(evt) {
 
 		} else {
          	if (state.lastStatus != "off") {
-                log.debug "Humidity Rose Above $humidityHigh1:  sending SMS to $phone1 and deactivating $mySwitch"
+                log.debug "Humidity Rose Above $humidityHigh1:  sending SMS and deactivating $mySwitch"
                 send("${humiditySensor1.label} sensed high humidity level of ${evt.value}, turning off ${switch1.label}")
                 switch1?.off()
                 state.lastStatus = "off"
@@ -99,7 +99,7 @@ def humidityHandler(evt) {
 
 		} else {
         	if (state.lastStatus != "on") {
-                log.debug "Humidity Dropped Below $humidityLow1:  sending SMS to $phone1 and activating $mySwitch"
+                log.debug "Humidity Dropped Below $humidityLow1:  sending SMS and activating $mySwitch"
                 send("${humiditySensor1.label} sensed low humidity level of ${evt.value}, turning on ${switch1.label}")
                 switch1?.on()
                 state.lastStatus = "on"
@@ -125,4 +125,4 @@ private send(msg) {
     }
 
     log.debug msg
-}
+}

smartapps/smartthings/has-barkley-been-fed.src/has-barkley-been-fed.groovy

@@ -68,7 +68,7 @@ def scheduleCheck()
             sendNotificationToContacts("No one has fed the dog", recipients)
         }
         else {
-            log.debug "Feeder was not opened since $midnight, texting $phone1"
+            log.debug "Feeder was not opened since $midnight, texting one phone number"
             sendSms(phone1, "No one has fed the dog")
         }
 	}

smartapps/smartthings/its-too-cold.src/its-too-cold.groovy

@@ -69,10 +69,10 @@ def temperatureHandler(evt) {
 		def alreadySentSms = recentEvents.count { it.doubleValue <= tooCold } > 1
 
 		if (alreadySentSms) {
-			log.debug "SMS already sent to $phone1 within the last $deltaMinutes minutes"
+			log.debug "SMS already sent within the last $deltaMinutes minutes"
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
-			log.debug "Temperature dropped below $tooCold:  sending SMS to $phone1 and activating $mySwitch"
+			log.debug "Temperature dropped below $tooCold:  sending SMS and activating $mySwitch"
 			def tempScale = location.temperatureScale ?: "F"
 			send("${temperatureSensor1.displayName} is too cold, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
 			switch1?.on()