Merge pull request #1316 from SmartThingsCommunity/staging

Rolling up staging to prod for deployment

build.gradle

@@ -19,7 +19,7 @@ buildscript {
                 username smartThingsArtifactoryUserName
                 password smartThingsArtifactoryPassword
             }
-            url "http://artifactory.smartthings.com/libs-release-local"
+            url "https://artifactory.smartthings.com/libs-release-local"
         }
     }
 }
@@ -27,9 +27,37 @@ buildscript {
 repositories {
     mavenLocal()
     jcenter()
+    maven {
+        credentials {
+            username smartThingsArtifactoryUserName
+            password smartThingsArtifactoryPassword
+        }
+        url "https://artifactory.smartthings.com/libs-release-local"
+    }
+}
+
+sourceSets {
+    devicetypes {
+        groovy {
+            srcDirs = ['devicetypes']
+        }
+    }
+    smartapps {
+        groovy {
+            srcDirs = ['smartapps']
+        }
+    }
 }
 
 dependencies {
+    devicetypesCompile 'org.codehaus.groovy:groovy-all:2.4.7'
+    devicetypesCompile 'smartthings:appengine-z-wave:0.1.2'
+    devicetypesCompile 'smartthings:appengine-zigbee:0.1.11'
+    smartappsCompile 'org.codehaus.groovy:groovy-all:2.4.7'
+    smartappsCompile 'smartthings:appengine-common:0.1.8'
+    smartappsCompile 'org.codehaus.groovy.modules.http-builder:http-builder:0.7.1'
+    smartappsCompile 'org.grails:grails-web:2.3.11'
+    smartappsCompile 'org.json:json:20140107'
 }
 
 slackSendMessage {

circle.yml

@@ -5,7 +5,9 @@ machine:
 
 dependencies:
   override:
-    - echo "Nothing to do."
+    - ./gradlew dependencies -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD"
+  post:
+    - ./gradlew compileSmartappsGroovy compileDevicetypesGroovy -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD"
 
 test:
   override:

devicetypes/dianoga/netatmo-additional-module.src/netatmo-additional-module.groovy

@@ -15,6 +15,7 @@
  */
 metadata {
 	definition (name: "Netatmo Additional Module", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 

devicetypes/dianoga/netatmo-basestation.src/netatmo-basestation.groovy

@@ -15,6 +15,7 @@
  */
 metadata {
 	definition (name: "Netatmo Basestation", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 

devicetypes/dianoga/netatmo-outdoor-module.src/netatmo-outdoor-module.groovy

@@ -15,6 +15,7 @@
  */
 metadata {
 	definition (name: "Netatmo Outdoor Module", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 	}

devicetypes/dianoga/netatmo-rain.src/netatmo-rain.groovy

@@ -15,6 +15,8 @@
  */
 metadata {
 	definition (name: "Netatmo Rain", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
+	
 		attribute "rain", "number"
         attribute "rainSumHour", "number"
         attribute "rainSumDay", "number"

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -33,8 +33,8 @@ metadata {
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGMS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.motion", key:"PRIMARY_CONTROL") {
-            	attributeState("inactive", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
-            	attributeState("active", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")   
+            	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
+            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")   
             }
             
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
@@ -278,4 +278,4 @@ private encap(physicalgraph.zwave.Command cmd) {
     } else {
     	crc16(cmd)
     }
-}
+}

devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy

@@ -274,6 +274,7 @@ private Map makeTemperatureResult(value) {
         name: 'temperature',
         value: "" + value,
         descriptionText: "${linkText} is ${value}°${temperatureScale}",
+        unit: temperatureScale
     ]
 }
 

devicetypes/plaidsystems/spruce-sensor.src/spruce-sensor.groovy

@@ -254,7 +254,8 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+		unit: temperatureScale
 	]
 }
 

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,7 +22,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -328,9 +327,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device user configured or default 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2* (timeOptionValueMap[reportInterval] ?: (2*8*60)), displayed: false)
-
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
 	def request = []

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		command "configureAfterSecure"
 
@@ -248,8 +247,6 @@ def configureAfterSecure() {
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
-	// allow device 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*8*60, displayed: false)
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -181,9 +180,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device 10 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*5*60, displayed: false)
-
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
 		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2).format(),

devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy

@@ -87,16 +87,27 @@ def beep() {
 	up to this long from the time you send the message to the time you hear a sound.
 	*/
 
+	// Used source endpoint of 0x02 because we are using smartthings manufacturer specific cluster.
 	[
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}"
+		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 	]
 }
 

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -47,6 +47,9 @@ metadata {
 
         command "everywhereJoin"
         command "everywhereLeave"
+
+        command "forceOff"
+        command "forceOn"
     }
 
     /**
@@ -64,9 +67,9 @@ metadata {
     }
 
     standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
+        state "on", label: '${name}', action: "forceOff", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
         state "turningOff", label:'TURNING OFF', icon:"st.Electronics.electronics16", backgroundColor:"#ffffff"
-        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
+        state "off", label: '${name}', action: "forceOn", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
         state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#79b821"
     }
     valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
@@ -140,8 +143,22 @@ metadata {
  * one place.
  *
  */
-def off() { onAction("off") }
-def on() { onAction("on") }
+def off() {
+    if (device.currentState("switch")?.value == "on") {
+        onAction("off")
+    }
+}
+def forceOff() {
+    onAction("off")
+}
+def on() {
+    if (device.currentState("switch")?.value == "off") {
+        onAction("on")
+    }
+}
+def forceOn() {
+    onAction("on")
+}
 def volup() { onAction("volup") }
 def voldown() { onAction("voldown") }
 def preset1() { onAction("1") }
@@ -240,11 +257,11 @@ def onAction(String user, data=null) {
     def actions = null
     switch (user) {
         case "on":
-            actions = boseSetPowerState(true)
+            boseSetPowerState(true)
             break
         case "off":
             boseSetNowPlaying(null, "STANDBY")
-            actions = boseSetPowerState(false)
+            boseSetPowerState(false)
             break
         case "volume":
             actions = boseSetVolume(data)

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -105,11 +105,21 @@ def parseDescriptionAsMap(description) {
 
 // Commands to device
 def on() {
-	'zcl on-off on'
+	[
+			'zcl on-off on',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+	]
 }
 
 def off() {
-	'zcl on-off off'
+	[
+			'zcl on-off off',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+	]
 }
 
 def setLevel(value) {

devicetypes/smartthings/centralite-thermostat.src/centralite-thermostat.groovy

@@ -89,14 +89,17 @@ def parse(String description) {
 			log.debug "TEMP"
 			map.name = "temperature"
 			map.value = getTemperature(descMap.value)
+			map.unit = temperatureScale
 		} else if (descMap.cluster == "0201" && descMap.attrId == "0011") {
 			log.debug "COOLING SETPOINT"
 			map.name = "coolingSetpoint"
 			map.value = getTemperature(descMap.value)
+			map.unit = temperatureScale
 		} else if (descMap.cluster == "0201" && descMap.attrId == "0012") {
 			log.debug "HEATING SETPOINT"
 			map.name = "heatingSetpoint"
 			map.value = getTemperature(descMap.value)
+			map.unit = temperatureScale
 		} else if (descMap.cluster == "0201" && descMap.attrId == "001c") {
 			log.debug "MODE"
 			map.name = "thermostatMode"
@@ -169,7 +172,7 @@ def setHeatingSetpoint(degrees) {
 
 		def degreesInteger = Math.round(degrees)
 		log.debug "setHeatingSetpoint({$degreesInteger} ${temperatureScale})"
-		sendEvent("name": "heatingSetpoint", "value": degreesInteger)
+		sendEvent("name": "heatingSetpoint", "value": degreesInteger, "unit": temperatureScale)
 
 		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
 		"st wattr 0x${device.deviceNetworkId} 1 0x201 0x12 0x29 {" + hex(celsius * 100) + "}"
@@ -180,7 +183,7 @@ def setCoolingSetpoint(degrees) {
 	if (degrees != null) {
 		def degreesInteger = Math.round(degrees)
 		log.debug "setCoolingSetpoint({$degreesInteger} ${temperatureScale})"
-		sendEvent("name": "coolingSetpoint", "value": degreesInteger)
+		sendEvent("name": "coolingSetpoint", "value": degreesInteger, "unit": temperatureScale)
 		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
 		"st wattr 0x${device.deviceNetworkId} 1 0x201 0x11 0x29 {" + hex(celsius * 100) + "}"
 	}

devicetypes/smartthings/cree-bulb.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/cree-bulb.src/README.md

@@ -0,0 +1,34 @@
+# Connected Cree LED Bulb
+
+
+
+Works with: 
+
+* [Connected Cree LED Bulb](https://support.smartthings.com/hc/en-us/articles/204258280-Cree-Connected-LED-Bulb)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - represents current light level, usually 0-100 in percent
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C6 Connected Cree LED Bulb with maxReportTime of 5 mins.
+Check-in interval = 12 mins
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Cree Connected LED Bulb Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204258280-Cree-Connected-LED-Bulb)

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -19,10 +19,10 @@ metadata {
 
         capability "Actuator"
         capability "Configuration"
-        capability "Polling"
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
 
         fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
     }
@@ -85,15 +85,28 @@ def setLevel(value) {
     zigbee.setLevel(value) + ["delay 500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.levelRefresh()
+}
+
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
-def poll() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
+def healthPoll() {
+    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
+    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
 }
 
 def configure() {
+    unschedule()
+    schedule("0 0/5 * * * ? *", "healthPoll")
     log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    // minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -31,13 +31,13 @@ metadata {
 		command "switchMode"
 		command "switchFanMode"
 
-		attribute "thermostatSetpoint","number"
-		attribute "thermostatStatus","string"
+		attribute "thermostatSetpoint", "number"
+		attribute "thermostatStatus", "string"
 		attribute "maxHeatingSetpoint", "number"
 		attribute "minHeatingSetpoint", "number"
 		attribute "maxCoolingSetpoint", "number"
 		attribute "minCoolingSetpoint", "number"
-		attribute "deviceTemperatureUnit", "number"
+		attribute "deviceTemperatureUnit", "string"
 	}
 
 	tiles {
@@ -152,11 +152,11 @@ def generateEvent(Map results) {
 				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
 				isChange = isTemperatureStateChange(device, name, value.toString())
 				isDisplayed = isChange
-				event << [value: sendValue, isStateChange: isChange, displayed: isDisplayed]
+				event << [value: sendValue, unit: temperatureScale, isStateChange: isChange, displayed: isDisplayed]
 			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
 				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
 				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
-				event << [value: sendValue, displayed: false]
+				event << [value: sendValue, unit: temperatureScale, displayed: false]
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
 				isChange = isStateChange(device, name, value.toString())
 				event << [value: value.toString(), isStateChange: isChange, displayed: false]
@@ -234,9 +234,9 @@ void setHeatingSetpoint(setpoint) {
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
 
 	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
-		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
-		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
+	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
+		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
 		log.debug "Done setHeatingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
 		generateSetpointEvent()
 		generateStatusEvent()
@@ -271,9 +271,9 @@ void setCoolingSetpoint(setpoint) {
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
 
 	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
-		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
-		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
+	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
+		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
 		log.debug "Done setCoolingSetpoint>> coolingSetpoint = ${coolingSetpoint}, heatingSetpoint = ${heatingSetpoint}"
 		generateSetpointEvent()
 		generateStatusEvent()
@@ -287,14 +287,14 @@ void resumeProgram() {
 	log.debug "resumeProgram() is called"
 	sendEvent("name":"thermostatStatus", "value":"resuming schedule", "description":statusText, displayed: false)
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.resumeProgram(this, deviceId)) {
+	if (parent.resumeProgram(deviceId)) {
 		sendEvent("name":"thermostatStatus", "value":"setpoint is updating", "description":statusText, displayed: false)
 		runIn(5, "poll")
 		log.debug "resumeProgram() is done"
 		sendEvent("name":"resumeProgram", "value":"resume", descriptionText: "resumeProgram is done", displayed: false, isStateChange: true)
 	} else {
 		sendEvent("name":"thermostatStatus", "value":"failed resume click refresh", "description":statusText, displayed: false)
-		log.error "Error resumeProgram() check parent.resumeProgram(this, deviceId)"
+		log.error "Error resumeProgram() check parent.resumeProgram(deviceId)"
 	}
 
 }
@@ -406,7 +406,7 @@ def generateOperatingStateEvent(operatingState) {
 def off() {
 	log.debug "off"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"off", deviceId))
+	if (parent.setMode ("off", deviceId))
 		generateModeEvent("off")
 	else {
 		log.debug "Error setting new mode."
@@ -420,7 +420,7 @@ def off() {
 def heat() {
 	log.debug "heat"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"heat", deviceId))
+	if (parent.setMode ("heat", deviceId))
 		generateModeEvent("heat")
 	else {
 		log.debug "Error setting new mode."
@@ -438,7 +438,7 @@ def emergencyHeat() {
 def auxHeatOnly() {
 	log.debug "auxHeatOnly"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"auxHeatOnly", deviceId))
+	if (parent.setMode ("auxHeatOnly", deviceId))
 		generateModeEvent("auxHeatOnly")
 	else {
 		log.debug "Error setting new mode."
@@ -452,7 +452,7 @@ def auxHeatOnly() {
 def cool() {
 	log.debug "cool"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"cool", deviceId))
+	if (parent.setMode ("cool", deviceId))
 		generateModeEvent("cool")
 	else {
 		log.debug "Error setting new mode."
@@ -466,7 +466,7 @@ def cool() {
 def auto() {
 	log.debug "auto"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"auto", deviceId))
+	if (parent.setMode ("auto", deviceId))
 		generateModeEvent("auto")
 	else {
 		log.debug "Error setting new mode."
@@ -489,7 +489,7 @@ def fanOn() {
 	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
 
-	if (parent.setFanMode(this, heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
+	if (parent.setFanMode(heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
 		generateFanModeEvent(fanMode)
 	} else {
 		log.debug "Error setting new mode."
@@ -510,7 +510,7 @@ def fanAuto() {
 	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
 
-	if (parent.setFanMode(this, heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
+	if (parent.setFanMode(heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
 		generateFanModeEvent(fanMode)
 	} else {
 		log.debug "Error setting new mode."
@@ -556,12 +556,12 @@ def generateSetpointEvent() {
 
 	if (mode == "heat") {
 
-		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint )
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
 
 	}
 	else if (mode == "cool") {
 
-		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint)
+		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
 
 	} else if (mode == "auto") {
 
@@ -573,7 +573,7 @@ def generateSetpointEvent() {
 
 	} else if (mode == "auxHeatOnly") {
 
-		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint)
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
 
 	}
 
@@ -608,7 +608,7 @@ void raiseSetpoint() {
 			targetvalue = maxCoolingSetpoint
 		}
 
-		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
+		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
 		log.info "In mode $mode raiseSetpoint() to $targetvalue"
 
 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -644,7 +644,7 @@ void lowerSetpoint() {
 			targetvalue = minCoolingSetpoint
 		}
 
-		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
+		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
 		log.info "In mode $mode lowerSetpoint() to $targetvalue"
 
 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -690,10 +690,10 @@ void alterSetpoint(temp) {
 	def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
 
-	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
+	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
 		sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
-		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint)
-		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint)
+		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
+		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
 		log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
 	} else {
 		log.error "Error alterSetpoint()"

devicetypes/smartthings/fidure-thermostat.src/fidure-thermostat.groovy

@@ -682,7 +682,7 @@ def setHeatingSetpoint(degrees) {
 	def temperatureScale = getTemperatureScale()
 
 	def degreesInteger = degrees as Integer
-	sendEvent("name":"heatingSetpoint", "value":degreesInteger)
+	sendEvent("name":"heatingSetpoint", "value":degreesInteger, "unit":temperatureScale)
 
 	def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
 	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x12 0x29 {" + hex(celsius*100) + "}"
@@ -691,7 +691,7 @@ def setHeatingSetpoint(degrees) {
 
 def setCoolingSetpoint(degrees) {
 	def degreesInteger = degrees as Integer
-	sendEvent("name":"coolingSetpoint", "value":degreesInteger)
+	sendEvent("name":"coolingSetpoint", "value":degreesInteger, "unit":temperatureScale)
 	def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
 	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x11 0x29 {" + hex(celsius*100) + "}"
 

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -16,6 +16,7 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 
 		command "setAdjustedColor"
         command "reset"
@@ -43,7 +44,7 @@ metadata {
 		}
 
 		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
+			state "default", label:"Reset To White", action:"reset", icon:"st.lights.philips.hue-single"
 		}
 
 		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
@@ -51,10 +52,14 @@ metadata {
 		}
 
 		main(["rich-control"])
-		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
+		details(["rich-control", "reset", "refresh"])
 	}
 }
 
+void installed() {
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
@@ -75,118 +80,78 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
-	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
-	sendEvent(name: "switch", value: "off")
-}
-
-void nextLevel() {
-	def level = device.latestValue("level") as Integer ?: 0
-	if (level <= 100) {
-		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
-	}
-	else {
-		level = 25
-	}
-	setLevel(level)
 }
 
 void setLevel(percent) {
     log.debug "Executing 'setLevel'"
     if (verifyPercent(percent)) {
-        parent.setLevel(this, percent)
-        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
-        sendEvent(name: "switch", value: "on")
+	    log.trace parent.setLevel(this, percent)
     }
 }
 
 void setSaturation(percent) {
     log.debug "Executing 'setSaturation'"
     if (verifyPercent(percent)) {
-        parent.setSaturation(this, percent)
-        sendEvent(name: "saturation", value: percent, displayed: false)
+	    log.trace parent.setSaturation(this, percent)
     }
 }
 
 void setHue(percent) {
     log.debug "Executing 'setHue'"
     if (verifyPercent(percent)) {
-        parent.setHue(this, percent)
-        sendEvent(name: "hue", value: percent, displayed: false)
+	    log.trace parent.setHue(this, percent)
     }
 }
 
 void setColor(value) {
-    log.debug "setColor: ${value}, $this"
     def events = []
     def validValues = [:]
 
     if (verifyPercent(value.hue)) {
-        events << createEvent(name: "hue", value: value.hue, displayed: false)
         validValues.hue = value.hue
     }
     if (verifyPercent(value.saturation)) {
-        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
         validValues.saturation = value.saturation
     }
     if (value.hex != null) {
         if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
-            events << createEvent(name: "color", value: value.hex)
             validValues.hex = value.hex
         } else {
             log.warn "$value.hex is not a valid color"
         }
     }
     if (verifyPercent(value.level)) {
-        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
         validValues.level = value.level
     }
     if (value.switch == "off" || (value.level != null && value.level <= 0)) {
-        events << createEvent(name: "switch", value: "off")
         validValues.switch = "off"
     } else {
-        events << createEvent(name: "switch", value: "on")
         validValues.switch = "on"
     }
-    if (!events.isEmpty()) {
-        parent.setColor(this, validValues)
-    }
-    events.each {
-        sendEvent(it)
+    if (!validValues.isEmpty()) {
+	    log.trace parent.setColor(this, validValues)
     }
 }
 
 void reset() {
     log.debug "Executing 'reset'"
-    def value = [level:100, saturation:56, hue:23]
-    setAdjustedColor(value)
-    parent.poll()
+	def value = [hue:20, saturation:2]
+	setAdjustedColor(value)
 }
 
 void setAdjustedColor(value) {
     if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
-        adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
         adjusted.level = null
-        setColor(adjusted)
+	    setColor(adjusted)
     } else {
-        log.warn "Invalid color input"
-    }
-}
-
-void setColorTemperature(value) {
-    if (value) {
-        log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
-        sendEvent(name: "switch", value: "on")
-    } else {
-        log.warn "Invalid color temperature"
+        log.warn "Invalid color input $value"
     }
 }
 
@@ -195,22 +160,6 @@ void refresh() {
     parent.manualRefresh()
 }
 
-def adjustOutgoingHue(percent) {
-	def adjusted = percent
-	if (percent > 31) {
-		if (percent < 63.0) {
-			adjusted = percent + (7 * (percent -30 ) / 32)
-		}
-		else if (percent < 73.0) {
-			adjusted = 69 + (5 * (percent - 62) / 10)
-		}
-		else {
-			adjusted = percent + (2 * (100 - percent) / 28)
-		}
-	}
-	log.info "percent: $percent, adjusted: $adjusted"
-	adjusted
-}
 
 def verifyPercent(percent) {
     if (percent == null)
@@ -222,3 +171,7 @@ def verifyPercent(percent) {
         return false
     }
 }
+
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,8 +7,15 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
-		attribute "serialNumber", "string"
+		capability "Health Check"
+
 		attribute "networkAddress", "string"
+		// Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
+		// Possible values "Online" or "Offline"
+		attribute "status", "string"
+		// Id is the number on the back of the hub, Hue uses last six digits of Mac address
+		// This is also used in the Hue application as ID
+		attribute "idNumber", "string"
 	}
 
 	simulator {
@@ -17,25 +24,30 @@ metadata {
 
 	tiles(scale: 2) {
      	multiAttributeTile(name:"rich-control"){
-			tileAttribute ("", key: "PRIMARY_CONTROL") {
-	            attributeState "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#F3C200"
+			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
+				attributeState "Offline", label: '${currentValue}', action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#ffffff"
+	            attributeState "Online", label: '${currentValue}', action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#79b821"
 			}
-	        tileAttribute ("serialNumber", key: "SECONDARY_CONTROL") {
-	            attributeState "default", label:'SN: ${currentValue}'
 			}
-        }
-		valueTile("serialNumber", "device.serialNumber", decoration: "flat", height: 1, width: 2, inactiveLabel: false) {
-			state "default", label:'SN: ${currentValue}'
+		valueTile("doNotRemove", "v", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+			state "default", label:'If removed, Hue lights will not work properly'
 		}
-		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 2, width: 4, inactiveLabel: false) {
-			state "default", label:'${currentValue}', height: 1, width: 2, inactiveLabel: false
+		valueTile("idNumber", "device.idNumber", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+			state "default", label:'ID: ${currentValue}'
+		}
+		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+			state "default", label:'IP: ${currentValue}'
 		}
 
 		main (["rich-control"])
-		details(["rich-control", "networkAddress"])
+		details(["rich-control", "doNotRemove", "idNumber", "networkAddress"])
 	}
 }
 
+void installed() {
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "Parsing '${description}'"
@@ -56,7 +68,7 @@ def parse(description) {
 			log.trace "HUE BRIDGE, GENERATING EVENT: $map.name: $map.value"
 			results << createEvent(name: "${map.name}", value: "${map.value}")
 		} else {
-        	log.trace "Parsing description"
+			log.trace "Parsing description"
 			def msg = parseLanMessage(description)
 			if (msg.body) {
 				def contentType = msg.headers["Content-Type"]
@@ -64,18 +76,17 @@ def parse(description) {
 					def bulbs = new groovy.json.JsonSlurper().parseText(msg.body)
 					if (bulbs.state) {
 						log.info "Bridge response: $msg.body"
-					} else {
-						// Sending Bulbs List to parent"
-                        if (parent.state.inBulbDiscovery)
-                        	log.info parent.bulbListHandler(device.hub.id, msg.body)
 					}
-				}
-				else if (contentType?.contains("xml")) {
+				} else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
-                    parent.hubVerification(device.hub.id, msg.body)
+					parent.hubVerification(device.hub.id, msg.body)
 				}
 			}
 		}
 	}
 	results
 }
+
+def ping() {
+	log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -17,6 +17,7 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 
 		command "setAdjustedColor"
         command "reset"
@@ -43,16 +44,16 @@ metadata {
 			}
 		}
 
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
+    controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+        state "colorTemperature", action:"color temperature.setColorTemperature"
+    }
 
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
+    valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        state "colorTemperature", label: 'WHITES'
+    }
 
 		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
+			state "default", label:"Reset To White", action:"reset", icon:"st.lights.philips.hue-single"
 		}
 
 		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
@@ -64,6 +65,10 @@ metadata {
 	}
 }
 
+void installed() {
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
@@ -84,141 +89,92 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
-	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
-	sendEvent(name: "switch", value: "off")
-}
-
-void nextLevel() {
-	def level = device.latestValue("level") as Integer ?: 0
-	if (level <= 100) {
-		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
-	}
-	else {
-		level = 25
-	}
-	setLevel(level)
 }
 
 void setLevel(percent) {
     log.debug "Executing 'setLevel'"
     if (verifyPercent(percent)) {
-        parent.setLevel(this, percent)
-        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
-        sendEvent(name: "switch", value: "on")
+	    log.trace parent.setLevel(this, percent)
     }
 }
 
 void setSaturation(percent) {
     log.debug "Executing 'setSaturation'"
     if (verifyPercent(percent)) {
-        parent.setSaturation(this, percent)
-        sendEvent(name: "saturation", value: percent, displayed: false)
+	    log.trace parent.setSaturation(this, percent)
     }
 }
 
 void setHue(percent) {
     log.debug "Executing 'setHue'"
     if (verifyPercent(percent)) {
-        parent.setHue(this, percent)
-        sendEvent(name: "hue", value: percent, displayed: false)
+	    log.trace parent.setHue(this, percent)
     }
 }
 
 void setColor(value) {
-    log.debug "setColor: ${value}, $this"
     def events = []
     def validValues = [:]
 
     if (verifyPercent(value.hue)) {
-        events << createEvent(name: "hue", value: value.hue, displayed: false)
         validValues.hue = value.hue
     }
     if (verifyPercent(value.saturation)) {
-        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
         validValues.saturation = value.saturation
     }
     if (value.hex != null) {
         if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
-            events << createEvent(name: "color", value: value.hex)
             validValues.hex = value.hex
         } else {
             log.warn "$value.hex is not a valid color"
         }
     }
     if (verifyPercent(value.level)) {
-        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
         validValues.level = value.level
     }
     if (value.switch == "off" || (value.level != null && value.level <= 0)) {
-        events << createEvent(name: "switch", value: "off")
         validValues.switch = "off"
     } else {
-        events << createEvent(name: "switch", value: "on")
         validValues.switch = "on"
     }
-    if (!events.isEmpty()) {
-        parent.setColor(this, validValues)
-    }
-    events.each {
-        sendEvent(it)
+    if (!validValues.isEmpty()) {
+	    log.trace parent.setColor(this, validValues)
     }
 }
 
 void reset() {
     log.debug "Executing 'reset'"
-    def value = [level:100, saturation:56, hue:23]
-    setAdjustedColor(value)
-    parent.poll()
+	setColorTemperature(4000)
 }
 
 void setAdjustedColor(value) {
     if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
-        adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
         adjusted.level = null
-        setColor(adjusted)
+	    setColor(adjusted)
     } else {
-        log.warn "Invalid color input"
+        log.warn "Invalid color input $value"
     }
 }
 
 void setColorTemperature(value) {
     if (value) {
         log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
-        sendEvent(name: "switch", value: "on")
+	    log.trace parent.setColorTemperature(this, value)
     } else {
-        log.warn "Invalid color temperature"
+        log.warn "Invalid color temperature $value"
     }
 }
 
 void refresh() {
     log.debug "Executing 'refresh'"
-    parent.manualRefresh()
-}
-
-def adjustOutgoingHue(percent) {
-	def adjusted = percent
-	if (percent > 31) {
-		if (percent < 63.0) {
-			adjusted = percent + (7 * (percent -30 ) / 32)
-		}
-		else if (percent < 73.0) {
-			adjusted = 69 + (5 * (percent - 62) / 10)
-		}
-		else {
-			adjusted = percent + (2 * (100 - percent) / 28)
-		}
-	}
-	log.info "percent: $percent, adjusted: $adjusted"
-	adjusted
+    parent?.manualRefresh()
 }
 
 def verifyPercent(percent) {
@@ -231,3 +187,7 @@ def verifyPercent(percent) {
         return false
     }
 }
+
+def ping() {
+    log.trace "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -14,6 +14,7 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
+        capability "Health Check"
 
         command "refresh"
 	}
@@ -48,6 +49,10 @@ metadata {
     }
 }
 
+void installed() {
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
@@ -68,20 +73,16 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
-	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
-	sendEvent(name: "switch", value: "off")
 }
 
 void setLevel(percent) {
 	log.debug "Executing 'setLevel'"
     if (percent != null && percent >= 0 && percent <= 100) {
 		parent.setLevel(this, percent)
-		sendEvent(name: "level", value: percent)
-		sendEvent(name: "switch", value: "on")
 	} else {
     	log.warn "$percent is not 0-100"
     }
@@ -91,3 +92,7 @@ void refresh() {
 	log.debug "Executing 'refresh'"
 	parent.manualRefresh()
 }
+
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -15,6 +15,7 @@ metadata {
         capability "Color Temperature"
         capability "Switch"
         capability "Refresh"
+        capability "Health Check"
 
         command "refresh"
     }
@@ -36,12 +37,12 @@ metadata {
             }
         }
 
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2200..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
 
         valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
+            state "colorTemperature", label: 'WHITES'
         }
 
         standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
@@ -53,6 +54,10 @@ metadata {
     }
 }
 
+void installed() {
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+}
+
 // parse events into attributes
 def parse(description) {
     log.debug "parse() - $description"
@@ -73,20 +78,16 @@ def parse(description) {
 // handle commands
 void on() {
     log.trace parent.on(this)
-    sendEvent(name: "switch", value: "on")
 }
 
 void off() {
     log.trace parent.off(this)
-    sendEvent(name: "switch", value: "off")
 }
 
 void setLevel(percent) {
     log.debug "Executing 'setLevel'"
     if (percent != null && percent >= 0 && percent <= 100) {
-        parent.setLevel(this, percent)
-        sendEvent(name: "level", value: percent)
-        sendEvent(name: "switch", value: "on")
+        log.trace parent.setLevel(this, percent)
     } else {
         log.warn "$percent is not 0-100"
     }
@@ -95,9 +96,7 @@ void setLevel(percent) {
 void setColorTemperature(value) {
     if (value) {
         log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
-        sendEvent(name: "switch", value: "on")
+        log.trace parent.setColorTemperature(this, value)
     } else {
         log.warn "Invalid color temperature"
     }
@@ -108,3 +107,6 @@ void refresh() {
     parent.manualRefresh()
 }
 
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy

@@ -147,8 +147,8 @@ private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 	Map resultMap = [:]
 
-	result.name = 'motion'
-	result.value = zs.isAlarm2Set() ? 'active' : 'inactive'
+	resultMap.name = 'motion'
+	resultMap.value = zs.isAlarm2Set() ? 'active' : 'inactive'
 	log.debug(zs.isAlarm2Set() ? 'motion' : 'no motion')
 
 	return resultMap

devicetypes/smartthings/osram-lightify-gardenspot-mini-rgb.src/osram-lightify-gardenspot-mini-rgb.groovy

@@ -91,7 +91,7 @@ def parse(String description) {
 
         if (descMap.cluster == "0300") {
             if(descMap.attrId == "0000"){  //Hue Attribute
-                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 360)
+                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
                 log.debug "Hue value returned is $hueValue"
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
@@ -203,7 +203,7 @@ def setLevel(value) {
 
 //input Hue Integer values; returns color name for saturation 100%
 private getColorName(hueValue){
-    if(hueValue>360 || hueValue<0)
+    if(hueValue>100 || hueValue<0)
         return
 
     hueValue = Math.round(hueValue / 100 * 360)

devicetypes/smartthings/osram-lightify-led-flexible-strip-rgbw.src/osram-lightify-led-flexible-strip-rgbw.groovy

@@ -1,4 +1,4 @@
-/* 
+/*
     Osram Flex RGBW Light Strip
 
     Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
@@ -8,7 +8,7 @@
 
 metadata {
 	definition (name: "OSRAM LIGHTIFY LED Flexible Strip RGBW", namespace: "smartthings", author: "SmartThings") {
-        
+
         capability "Color Temperature"
         capability "Actuator"
         capability "Switch"
@@ -18,7 +18,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Color Control"
-                        
+
         attribute "colorName", "string"
 
         command "setAdjustedColor"
@@ -49,7 +49,7 @@ metadata {
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-		
+
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
 			state "colorTemperature", action:"color temperature.setColorTemperature"
 		}
@@ -118,7 +118,7 @@ def parse(String description) {
                 }
             }
             else if(descMap.attrId == "0000"){  //Hue Attribute
-                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 360)
+                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
                 log.debug "Hue value returned is $hueValue"
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
@@ -274,7 +274,7 @@ private getGenericName(value){
 
 //input Hue Integer values; returns color name for saturation 100%
 private getColorName(hueValue){
-    if(hueValue>360 || hueValue<0)
+    if(hueValue>100 || hueValue<0)
         return
 
     hueValue = Math.round(hueValue / 100 * 360)
@@ -449,7 +449,7 @@ def setColor(value){
         def level = hex(value.level * 255 / 100)
         cmd << zigbeeSetLevel(level)
     }
-    
+
 	if (value.switch == "off") {
 		cmd << "delay 150"
 		cmd << off()

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -47,9 +47,21 @@ def parse(String description) {
 
 // Commands to device
 def on() {
-	'zcl on-off on'
+	[
+			'zcl on-off on',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+
+	]
+
 }
 
 def off() {
-	'zcl on-off off'
+	[
+			'zcl on-off off',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+	]
 }

devicetypes/smartthings/smartpower-outlet.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartpower-outlet.src/README.md

@@ -0,0 +1,38 @@
+# SmartPower Outlet
+
+
+
+Works with: 
+
+* [Samsung SmartPower Outlet](https://shop.smartthings.com/#!/products/smartpower-outlet)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Actuator** - represents that a Device has commands
+* **Switch** - can detect state (possible values: on/off)
+* **Refresh** - _refresh()_ command for status updates
+* **Power Meter** - detects power meter for device in either w or kw.
+* **Health Check** - indicates ability to get device health notifications
+* **Sensor** - detects sensor events
+
+## Device Health
+
+A Category C1 smart power outlet with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following links
+for the different models:
+* [SmartPower Outlet Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/201084854-SmartPower-Outlet)
+* [Samsung SmartThings Outlet Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205957620)

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -101,12 +101,6 @@ def parse(String description) {
 		else {
 			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
 			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
-			// Temporary fix for the case when Device is OFFLINE and is connected again
-			if (state.lastOnOff == null){
-				state.lastOnOff = now()
-				sendEvent(name: "deviceWatch-lastActivity", value: state.lastOnOff, description: "Last Activity is on ${new Date(state.lastOnOff)}", displayed: false, isStateChange: true)
-			}
-			state.lastOnOff = now()
 		}
 	}
 	else {
@@ -123,19 +117,10 @@ def on() {
 	zigbee.on()
 }
 /**
- * PING is used by Device-Watch in attempt to reach the Outlet
+ * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-	// send read attribute onOFF if the last time we heard from the outlet is outside of the checkInterval
-	if (state.lastOnOff < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastOnOff=${new Date(state.lastOnOff)}"
-		state.lastOnOff = null
-		return zigbee.onOffRefresh()
-	} else { // if the last onOff activity is within the checkInterval we artificially create a Device-Watch event
-		log.info "ping, alive=yes, lastOnOff=${new Date(state.lastOnOff)}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastOnOff, description: "Last Activity is on ${new Date(state.lastOnOff)}", displayed: false, isStateChange: true)
-	}
+	return zigbee.onOffRefresh()
 }
 
 def refresh() {
@@ -143,8 +128,10 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 1200, displayed: false)
-	zigbee.onOffConfig() + powerConfig() + refresh()
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+	zigbee.onOffConfig(0, 300) + powerConfig() + refresh()
 }
 
 //power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)

devicetypes/smartthings/smartsense-moisture-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-moisture-sensor.src/README.md

@@ -0,0 +1,44 @@
+# Smartsense Moisture Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartThings Moisture Sensor](https://shop.smartthings.com/#!/products/samsung-smartthings-water-leak-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Battery** - defines device uses a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Temperature Measurement** - defines device measures current temperature
+* **Water Sensor** - can detect presence of water (dry or wet)
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C2 moisture sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Battery Specification
+
+One CR2 3V battery required.
+
+## Troubleshooting
+
+If the sensor doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different sensors from SmartThings can be found in the following links
+for the different models:
+* [SmartSense Moisture Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202847044-SmartSense-Moisture-Sensor)
+* [Samsung SmartThings Water Leak Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205957630)
+Other troubleshooting tips are listed as follows:
+* [Troubleshooting: Samsung SmartThings Water Leak Sensor won’t pair after removing pull-tab](https://support.smartthings.com/hc/en-us/articles/204966616-Troubleshooting-Samsung-SmartThings-device-won-t-pair-after-removing-pull-tab)

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -24,7 +24,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Water Sensor"
 		capability "Health Check"
-		capability "Sensor"		
+		capability "Sensor"
 
 		command "enrollResponse"
 
@@ -180,9 +180,9 @@ private Map parseIasMessage(String description) {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return celsius
+		return Math.round(celsius)
 	} else {
-		return celsiusToFahrenheit(celsius) as Integer
+		return Math.round(celsiusToFahrenheit(celsius))
 	}
 }
 
@@ -226,6 +226,8 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
@@ -252,7 +254,8 @@ private Map getTemperatureResult(value) {
 		name: 'temperature',
 		value: value,
 		descriptionText: descriptionText,
-        translatable: true
+		translatable: true,
+		unit: temperatureScale
 	]
 }
 
@@ -271,6 +274,13 @@ private Map getMoistureResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+}
+
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
@@ -282,23 +292,19 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [
+	def enrollCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-	return configCmds + refresh() // send refresh cmds as part of config
+
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -9,7 +9,8 @@ Works with:
 ## Table of contents
 
 * [Capabilities](#capabilities)
-* [Health]($health)
+* [Health](#device-health)
+* [Battery](#battery-specification)
 
 ## Capabilities
 
@@ -21,10 +22,24 @@ Works with:
 
 ## Device Health
 
-A Category C2 motion sensor that has 120min check-in interval
-
-
+A Category C2 motion sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime.
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
+## Battery Specification
 
+One CR2477 (for Samsung SmartThings Motion Sensor) / CR123A (SmartSense Motion Sensor) 3V battery is required.
 
+## Troubleshooting
 
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [SmartSense Motion Sensor (original model) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200903280-SmartSense-Motion-Sensor-original-model-)
+* [SmartSense Motion Sensor (2014 model) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/203077520-SmartSense-Motion-Sensor-2014-model-)
+* [Samsung SmartThings Motion Sensor (2015 model) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205957580-Samsung-SmartThings-Motion-Sensor-2015-model-)
+Other troubleshooting tips are listed as follows:
+* [Troubleshooting: Samsung SmartThings Motion Sensor is stuck showing "Motion Detected" or "No Motion"](https://support.smartthings.com/hc/en-us/articles/200961130-Troubleshooting-Samsung-SmartThings-Motion-Sensor-is-stuck-showing-Motion-Detected-or-No-Motion-)
+* [Troubleshooting: Samsung SmartThings Motion Sensor won’t pair after removing pull-tab](https://support.smartthings.com/hc/en-us/articles/204966616-Troubleshooting-Samsung-SmartThings-device-won-t-pair-after-removing-pull-tab)

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -24,7 +24,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Health Check"
-		capability "Sensor"		
+		capability "Sensor"
 
 		command "enrollResponse"
 
@@ -194,9 +194,9 @@ private Map parseIasMessage(String description) {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return celsius
+		return Math.round(celsius)
 	} else {
-		return celsiusToFahrenheit(celsius) as Integer
+		return Math.round(celsiusToFahrenheit(celsius))
 	}
 }
 
@@ -241,6 +241,8 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
@@ -267,7 +269,8 @@ private Map getTemperatureResult(value) {
 		name: 'temperature',
 		value: value,
 		descriptionText: descriptionText,
-        translatable: true
+		translatable: true,
+		unit: temperatureScale
 	]
 }
 
@@ -282,6 +285,13 @@ private Map getMotionResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+}
+
 def refresh() {
 	log.debug "refresh called"
 	def refreshCmds = [
@@ -293,24 +303,19 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 
-	def configCmds = [
+	def enrollCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
-	return configCmds + refresh() // send refresh cmds as part of config
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -170,7 +170,7 @@ private Map parseCustomMessage(String description) {
 
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
-	return zs.isAlarm1Set() ? getMotionResult('active') : getMotionResult('inactive')
+	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
 
 def getTemperature(value) {
@@ -206,6 +206,8 @@ private Map getBatteryResult(rawValue) {
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
+			if (roundedPct <= 0)
+				roundedPct = 1
 			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
@@ -226,7 +228,8 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+		unit: temperatureScale
 	]
 }
 

devicetypes/smartthings/smartsense-multi-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-multi-sensor.src/README.md

@@ -0,0 +1,45 @@
+# Smartsense Multi Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartThings Multi Sensor](https://shop.smartthings.com/#!/products/smartsense-multi)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Three Axis** - monitors the state of a single axis
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Battery** - defines device uses a battery
+* **Sensor** - detects sensor events
+* **Contact Sensor** - can detect contact (possible values: open,closed)
+* **Acceleration Sensor** - allows for acceleration detection.
+* **Refresh** - _refresh()_ command for status updates
+* **Temperature Measurement** - defines device measures current temperature
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C2 multi sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Battery Specification
+
+One CR2450 (for Samsung SmartThings Multipurpose Sensor) battery / Two AAAA (for SmartSense Multi Sensor) batteries required.
+
+## Troubleshooting
+
+If the sensor doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Other troubleshooting tips are listed as follows:
+* [Troubleshooting: Samsung SmartThings Multipurpose Sensor is stuck on "open" or "closed"](https://support.smartthings.com/hc/en-us/articles/200955940-Troubleshooting-Samsung-SmartThings-Multipurpose-Sensor-is-stuck-on-open-or-closed-)
+* [Troubleshooting: Temperature reading for the Samsung SmartThings Multipurpose Sensor is off](https://support.smartthings.com/hc/en-us/articles/200756845-Troubleshooting-Temperature-reading-for-the-Samsung-SmartThings-Multipurpose-Sensor-is-off)
+* [Troubleshooting: Samsung SmartThings Multipurpose Sensor won’t pair after removing pull-tab](https://support.smartthings.com/hc/en-us/articles/204966616-Troubleshooting-Samsung-SmartThings-device-won-t-pair-after-removing-pull-tab)

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -228,9 +228,9 @@ private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 	Map resultMap = [:]
 
-	if(garageSensor !=  "Yes") {
+			if (garageSensor != "Yes"){
 		resultMap = zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
-	}
+			}
 
 	return resultMap
 }
@@ -261,9 +261,9 @@ def updated() {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return celsius
+		return Math.round(celsius)
 		} else {
-			return celsiusToFahrenheit(celsius) as Integer
+			return Math.round(celsiusToFahrenheit(celsius))
 		}
 	}
 
@@ -306,6 +306,8 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
@@ -326,10 +328,11 @@ private Map getTemperatureResult(value) {
 			'{{ device.displayName }} was {{ value }}°F'
 
 	return [
-	name: 'temperature',
-	value: value,
-	descriptionText: descriptionText,
-    translatable: true
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		translatable: true,
+		unit: temperatureScale
 	]
 }
 
@@ -364,6 +367,13 @@ private getAccelerationResult(numValue) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+}
+
 def refresh() {
 	log.debug "Refreshing Values "
 
@@ -391,13 +401,16 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting"
 
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
 	def configCmds = enrollResponse() +
 			zigbee.batteryConfig() +
-			zigbee.temperatureConfig() +
+			zigbee.temperatureConfig(30, 300) +
 			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -206,6 +206,8 @@ def getTemperature(value) {
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
+	        if (roundedPct <= 0)
+		        roundedPct = 1
 			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
@@ -223,9 +225,10 @@ def getTemperature(value) {
 		}
 		def descriptionText = "${linkText} was ${value}°${temperatureScale}"
 		return [
-		name: 'temperature',
-		value: value,
-		descriptionText: descriptionText
+			name: 'temperature',
+			value: value,
+			descriptionText: descriptionText,
+			unit: temperatureScale
 		]
 	}
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-open-closed-sensor.src/README.md

@@ -0,0 +1,41 @@
+# Smartsense Open/Closed Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartThings Open/Closed Sensor](https://shop.smartthings.com/#!/packs/smartsense-open-closed-sensor/)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Battery** - defines device uses a battery
+* **Contact Sensor** - can detect contact (possible values: open,closed)
+* **Refresh** - _refresh()_ command for status updates
+* **Temperature Measurement** - defines device measures current temperature
+* **Health Check** - indicates ability to get device health notifications
+* **Sensor** - detects sensor events
+
+## Device Health
+
+A Category C2 open/closed sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Battery Specification
+
+One CR2 3V battery required.
+
+## Troubleshooting
+
+If the sensor doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
+* [SmartSense Open/Closed Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202836844-SmartSense-Open-Closed-Sensor)

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -200,6 +200,8 @@ private Map getBatteryResult(rawValue) {
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
+	    if (roundedPct <= 0)
+		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
@@ -219,7 +221,8 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+		unit: temperatureScale
 	]
 }
 
@@ -234,6 +237,13 @@ private Map getContactResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+}
+
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
@@ -245,23 +255,19 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [
+	def enrollCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-    return configCmds + refresh() // send refresh cmds as part of config
+
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/README.md

@@ -0,0 +1,41 @@
+# SmartSense Temp/Humidity Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartSense Temp/Humidity Sensor](https://shop.smartthings.com/#!/products/smartsense-temp-humidity-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Battery** - defines device uses a battery
+* **Relative Humidity Measurement** - defines device measures relative humidity
+* **Refresh** - _refresh()_ command for status updates
+* **Temperature Measurement** - defines device measures current temperature
+* **Health Check** - indicates ability to get device health notifications
+* **Sensor** - detects sensor events
+
+## Device Health
+
+A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Battery Specification
+
+One CR2 battery is required.
+
+## Troubleshooting
+
+If the sensor doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
+* [Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/203040294)

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -207,6 +207,8 @@ private Map getBatteryResult(rawValue) {
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
+	    if (roundedPct <= 0)
+		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
@@ -226,7 +228,8 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+		unit: temperatureScale
 	]
 }
 
@@ -239,6 +242,13 @@ private Map getHumidityResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+}
+
 def refresh()
 {
 	log.debug "refresh temperature, humidity, and battery"
@@ -254,23 +264,19 @@ def refresh()
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting and Bindings."
-	def configCmds = [
-		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
+	def humidityConfigCmds = [
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 500",
 		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-	return configCmds + refresh() // send refresh cmds as part of config
+
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+	return humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) +  refresh() // send refresh cmds as part of config
 }
 
 private hex(value) {

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -213,7 +213,8 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+		unit: temperatureScale
 	]
 }
 

devicetypes/smartthings/zigbee-dimmer.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-dimmer.src/README.md

@@ -0,0 +1,36 @@
+# OSRAM Lightify LED On/Off/Dim
+
+
+
+Works with: 
+
+* [OSRAM Lightify LED On/Off/Dim](https://shop.smartthings.com/#!/products/osram-led-smart-bulb-on-off-dim)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - represents current light level, usually 0-100 in percent
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C1 Zigbee dimmer with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Other troubleshooting tips are listed as follows:
+* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/207191763-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-On-Off-Dim)

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,12 +13,13 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", category: "C1") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
@@ -53,7 +54,10 @@ def parse(String description) {
 
     def event = zigbee.getEvent(description)
     if (event) {
-        sendEvent(event)
+        if (event.name=="level" && event.value==0) {}
+        else {
+            sendEvent(event)
+        }
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"
@@ -72,6 +76,12 @@ def on() {
 def setLevel(value) {
     zigbee.setLevel(value)
 }
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.onOffRefresh()
+}
 
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
@@ -79,5 +89,8 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -31,7 +31,8 @@
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
-    }
+	fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
+	}
 
     tiles(scale: 2) {
 		multiAttributeTile(name:"toggle", type:"generic", width:6, height:4){

devicetypes/smartthings/zigbee-rgbw-bulb.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-rgbw-bulb.src/README.md

@@ -0,0 +1,42 @@
+# OSRAM LIGHTIFY LED RGBW Bulb
+
+
+
+Works with: 
+
+* [OSRAM LIGHTIFY LED RGBW Bulb](https://support.smartthings.com/hc/en-us/articles/207728173-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-RGBW)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Actuator** - It represents that a device has commands.
+* **Color Control** - It represents that the color attributes of a device can be controlled (hue, saturation, color value).
+* **Color Temperature** - It represents color temperature capability measured in degree Kelvin.
+* **Polling** - It represents that a device can be polled.
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - can detect current light level (0-100 in percent)
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+A Category C6 OSRAM LIGHTIFY LED RGBW Bulb with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+It may also happen that you need to reset the device.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/207728173-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-RGBW)

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings", category: "C6") {
 
         capability "Actuator"
         capability "Color Control"
@@ -27,6 +27,10 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
+
+        attribute "colorName", "string"
+        command "setGenericName"
 
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
@@ -54,15 +58,15 @@ metadata {
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
+        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorName", label: '${currentValue}'
         }
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 
         main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+        details(["switch", "colorTempSliderControl", "colorName", "refresh"])
     }
 }
 
@@ -78,10 +82,16 @@ private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 def parse(String description) {
     log.debug "description is $description"
 
-    def finalResult = zigbee.getEvent(description)
-    if (finalResult) {
-        log.debug finalResult
-        sendEvent(finalResult)
+    def event = zigbee.getEvent(description)
+    if (event) {
+        log.debug event
+        if (event.name=="level" && event.value==0) {}
+        else {
+            if (event.name=="colorTemperature") {
+                setGenericName(event.value)
+            }
+            sendEvent(event)
+        }
     }
     else {
         def zigbeeMap = zigbee.parseDescriptionAsMap(description)
@@ -89,12 +99,12 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
-                sendEvent(name: "hue", value: hueValue, displayed:false)
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
                 def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-                sendEvent(name: "saturation", value: saturationValue, displayed:false)
+                sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
             }
         }
         else {
@@ -110,20 +120,47 @@ def on() {
 def off() {
     zigbee.off()
 }
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.onOffRefresh()
+}
 
 def refresh() {
-    zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+    zigbee.onOffRefresh() + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
+    setGenericName(value)
     zigbee.setColorTemperature(value)
 }
 
+//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
+def setGenericName(value){
+    if (value != null) {
+        def genericName = "White"
+        if (value < 3300) {
+            genericName = "Soft White"
+        } else if (value < 4150) {
+            genericName = "Moonlight"
+        } else if (value <= 5000) {
+            genericName = "Cool White"
+        } else if (value >= 5000) {
+            genericName = "Daylight"
+        }
+        sendEvent(name: "colorName", value: genericName)
+    }
+}
+
 def setLevel(value) {
     zigbee.setLevel(value)
 }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/README.md

@@ -0,0 +1,37 @@
+# OSRAM Lightify Tunable 60 White
+
+
+
+Works with: 
+
+* [OSRAM Lightify Tunable 60 White](http://www.osram.com/osram_com/tools-and-services/tools/lightify---smart-connected-light/lightify-for-home---what-is-light-to-you/lightify-products/lightify-classic-a60-tunable-white/index.jsp)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Color Temperature** - represents color temperature, measured in degrees Kelvin.
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated.
+* **Refresh** - _refresh()_ command for status updates
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - represents current light level, usually 0-100 in percent
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C1 OSRAM Lightify Tunable 60 White with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Other troubleshooting tips are listed as follows:
+* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/204576454-OSRAM-LIGHTIFY-Tunable-White-60-Bulb)

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -17,11 +17,12 @@
  */
 
 metadata {
-    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings", category: "C1") {
 
         capability "Actuator"
         capability "Color Temperature"
         capability "Configuration"
+        capability "Health Check"
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
@@ -35,6 +36,7 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Recessed Kit RT 5/6 Tunable White"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
     }
 
     // UI tile definitions
@@ -49,9 +51,6 @@ metadata {
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
                 attributeState "level", action:"switch level.setLevel"
             }
-            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
-                attributeState "colorName", label:'${currentValue}'
-            }
         }
 
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
@@ -61,12 +60,12 @@ metadata {
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
+        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorName", label: '${currentValue}'
         }
 
         main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+        details(["switch", "colorTempSliderControl", "colorName", "refresh"])
     }
 }
 
@@ -75,7 +74,13 @@ def parse(String description) {
     log.debug "description is $description"
     def event = zigbee.getEvent(description)
     if (event) {
-        sendEvent(event)
+        if (event.name=="level" && event.value==0) {}
+        else {
+            if (event.name=="colorTemperature") {
+                setGenericName(event.value)
+            }
+            sendEvent(event)
+        }
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"
@@ -95,13 +100,23 @@ def setLevel(value) {
     zigbee.setLevel(value)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.onOffRefresh()
+}
+
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
 def setColorTemperature(value) {

smartapps/curb/curb-control.src/curb-control.groovy

@@ -65,7 +65,16 @@ void updateSwitch() {
 private void updateAll(devices) {
 	def command = request.JSON?.command
 	if (command) {
-		devices."$command"()
+		switch(command) {
+			case "on":
+				devices.on()
+				break
+			case "off":
+				devices.off()
+				break
+			default:
+				httpError(403, "Access denied. This command is not supported by current capability.")
+		}
 	}
 }
 
@@ -77,7 +86,16 @@ private void update(devices) {
 		if (!device) {
 			httpError(404, "Device not found")
 		} else {
-			device."$command"()
+			switch(command) {
+				case "on":
+					device.on()
+					break
+				case "off":
+					device.off()
+					break
+				default:
+					httpError(403, "Access denied. This command is not supported by current capability.")
+			}
 		}
 	}
 }

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -58,7 +58,7 @@ def authPage() {
 	if (canInstallLabs()) {
 
 		def redirectUrl = getBuildRedirectUrl()
-		log.debug "Redirect url = ${redirectUrl}"
+		// log.debug "Redirect url = ${redirectUrl}"
 
 		if (state.authToken) {
 			description = "Tap 'Next' to proceed"
@@ -113,13 +113,13 @@ def oauthInitUrl() {
 		scope: "read_station"
 	]
 
-	log.debug "REDIRECT URL: ${getVendorAuthPath() + toQueryString(oauthParams)}"
+	// log.debug "REDIRECT URL: ${getVendorAuthPath() + toQueryString(oauthParams)}"
 
 	redirect (location: getVendorAuthPath() + toQueryString(oauthParams))
 }
 
 def callback() {
-	log.debug "callback()>> params: $params, params.code ${params.code}"
+	// log.debug "callback()>> params: $params, params.code ${params.code}"
 
 	def code = params.code
 	def oauthState = params.state
@@ -135,7 +135,7 @@ def callback() {
 			scope: "read_station"
 		]
 
-		log.debug "TOKEN URL: ${getVendorTokenPath() + toQueryString(tokenParams)}"
+		// log.debug "TOKEN URL: ${getVendorTokenPath() + toQueryString(tokenParams)}"
 
 		def tokenUrl = getVendorTokenPath()
 		def params = [
@@ -144,7 +144,7 @@ def callback() {
 			body: tokenParams
 		]
 
-		log.debug "PARAMS: ${params}"
+		// log.debug "PARAMS: ${params}"
 
 		httpPost(params) { resp ->
 
@@ -156,7 +156,7 @@ def callback() {
 				state.refreshToken = data.refresh_token
 				state.authToken = data.access_token
 				state.tokenExpires = now() + (data.expires_in * 1000)
-				log.debug "swapped token: $resp.data"
+				// log.debug "swapped token: $resp.data"
 			}
 		}
 
@@ -292,7 +292,7 @@ def refreshToken() {
 
 			response.data.each {key, value ->
 				def data = slurper.parseText(key);
-				log.debug "Data: $data"
+				// log.debug "Data: $data"
 
 				state.refreshToken = data.refresh_token
 				state.accessToken = data.access_token

smartapps/docwisdom/humidity-alert.src/humidity-alert.groovy

@@ -78,7 +78,7 @@ def humidityHandler(evt) {
 			log.debug "Notification already sent within the last ${deltaMinutes} minutes"
 			
 		} else {
-			log.debug "Humidity Rose Above ${tooHumid}:  sending SMS to $phone1 and activating ${mySwitch}"
+			log.debug "Humidity Rose Above ${tooHumid}:  sending SMS and activating ${mySwitch}"
 			send("${humiditySensor1.label} sensed high humidity level of ${evt.value}")
 			switch1?.on()
 		}
@@ -91,7 +91,7 @@ def humidityHandler(evt) {
 			log.debug "Notification already sent within the last ${deltaMinutes} minutes"
 			
 		} else {
-			log.debug "Humidity Fell Below ${notHumidEnough}:  sending SMS to $phone1 and activating ${mySwitch}"
+			log.debug "Humidity Fell Below ${notHumidEnough}:  sending SMS and activating ${mySwitch}"
 			send("${humiditySensor1.label} sensed high humidity level of ${evt.value}")
 			switch1?.off()
 		}

smartapps/dooglave/let-there-be-dark.src/let-there-be-dark.groovy

@@ -25,15 +25,11 @@ preferences {
 
 def installed() {
 	subscribe(contact1, "contact", contactHandler)
-	subscribe(switch1, "switch.on", switchOnHandler)
-    subscribe(switch1, "switch.off", switchOffHandler)
 }
 
 def updated() {
 	unsubscribe()
 	subscribe(contact1, "contact", contactHandler)
-	subscribe(switch1, "switch.on", switchOnHandler)
-    subscribe(switch1, "switch.off", switchOffHandler)
 }
 
 def contactHandler(evt) {
@@ -46,4 +42,4 @@ def contactHandler(evt) {
 if (evt.value == "closed") {
 	if(state.wasOn)switch1.on()
 }
-}
+}

smartapps/egid/smart-windows.src/smart-windows.groovy

@@ -1,7 +1,7 @@
 /**
  *  Smart Windows
  *	Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!).
- * 
+ *
  *  Copyright 2014 Eric Gideon
  *
  * 	Based in part on the "When it's going to rain" SmartApp by the SmartThings team,
@@ -21,13 +21,18 @@ definition(
 	name: "Smart Windows",
 	namespace: "egid",
 	author: "Eric Gideon",
-	description: "Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!). If you don't use an external temperature device, your zipcode will be used instead.",
+	description: "Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!). If you don't use an external temperature device, your location will be used instead.",
 	iconUrl: "https://s3.amazonaws.com/smartthings-device-icons/Home/home9-icn.png",
 	iconX2Url: "https://s3.amazonaws.com/smartthings-device-icons/Home/home9-icn@2x.png"
 )
 
 
 preferences {
+
+  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
+		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
+	}
+
 	section( "Set the temperature range for your comfort zone..." ) {
 		input "minTemp", "number", title: "Minimum temperature"
 		input "maxTemp", "number", title: "Maximum temperature"
@@ -39,9 +44,11 @@ preferences {
 		input "inTemp", "capability.temperatureMeasurement", title: "Indoor"
 		input "outTemp", "capability.temperatureMeasurement", title: "Outdoor (optional)", required: false
 	}
-	section( "Set your location" ) {
-		input "zipCode", "text", title: "Zip code"
-	}
+
+	if (location.channelName != 'samsungtv') {
+		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
+  }
+
 	section( "Notifications" ) {
 		input "sendPushMessage", "enum", title: "Send a push notification?", metadata:[values:["Yes","No"]], required:false
 		input "retryPeriod", "number", title: "Minutes between notifications:"
@@ -72,7 +79,7 @@ def temperatureHandler(evt) {
 
 	def currentInTemp = evt.doubleValue
 	def openWindows = sensors.findAll { it?.latestValue("contact") == 'open' }
-	
+
 	log.trace "Temp event: $evt"
 	log.info "In: $currentInTemp; Out: $currentOutTemp"
 
@@ -98,7 +105,7 @@ def temperatureHandler(evt) {
 			if ( currentOutTemp < maxTemp && !openWindows ) {
 				send( "Open some windows to cool down the house! Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )
 			} else if ( currentOutTemp > maxTemp && openWindows ) {
-				send( "It's gotten warmer outside! You should close these windows: ${openWindows.join(', ')}. Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )				
+				send( "It's gotten warmer outside! You should close these windows: ${openWindows.join(', ')}. Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )
 			} else {
 				log.debug "No notifications sent. Everything is in the right place."
 			}
@@ -125,7 +132,11 @@ def temperatureHandler(evt) {
 }
 
 def weatherCheck() {
-	def json = getWeatherFeature("conditions", zipCode)
+	def json 
+	if (location.channelName != 'samsungtv')
+		json = getWeatherFeature("conditions", zipCode)
+	else
+		json = getWeatherFeature("conditions")
 	def currentTemp = json?.current_observation?.temp_f
 
 	if ( currentTemp ) {
@@ -150,4 +161,4 @@ private send(msg) {
 	}
 
 	log.info msg
-}
+}

smartapps/gideon-api/gideon.src/gideon.groovy

@@ -0,0 +1,253 @@
+/**
+ *  Gideon
+ *
+ *  Copyright 2016 Nicola Russo
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Gideon",
+    namespace: "gideon.api",
+    author: "Braindrain Solutions",
+    description: "Gideon AI Smart app allows you to connect and control all of your SmartThings devices through the Gideon AI app, making your SmartThings devices even smarter.",
+    category: "Family",
+    iconUrl: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    iconX2Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    iconX3Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    oauth: [displayName: "Gideon AI API", displayLink: "gideon.ai"])
+
+
+preferences {
+	section("Control these switches...") {
+        input "switches", "capability.switch", multiple:true
+    }
+    section("Control these motion sensors...") {
+        input "motions", "capability.motionSensor", multiple:true
+    }
+    section("Control these presence sensors...") {
+    	input "presence_sensors", "capability.presenceSensor", multiple:true
+    }
+    section("Control these outlets...") {
+    	input "outlets", "capability.switch", multiple:true
+    }
+    section("Control these locks...") {
+    	input "locks", "capability.lock", multiple:true
+    }
+    section("Control these locks...") {
+	    input "temperature_sensors", "capability.temperatureMeasurement"
+    }
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+    subscribe(outlet, "energy", outletHandler)
+  	subscribe(outlet, "switch", outletHandler)
+}
+
+// TODO: implement event handlers
+def outletHandler(evt) {
+	log.debug "$outlet.currentEnergy"
+	//TODO call G API  
+}
+
+
+private device(it, type) {
+	it ? [id: it.id, label: it.label, type: type] : null
+}
+
+//API Mapping
+mappings {
+	path("/getalldevices") {
+    action: [
+      			GET: "getAllDevices"
+    		]
+  	}
+	path("/doorlocks/:id/:command") {
+    action: [
+      GET: "updateDoorLock"
+    ]
+  }
+  	path("/doorlocks/:id") {
+    action: [
+      			GET: "getDoorLockStatus"
+    		]
+  	}
+  	path("/tempsensors/:id") {
+    action: [
+      GET: "getTempSensorsStatus"
+    ]
+  }
+  	path("/presences/:id") {
+    action: [
+      GET: "getPresenceStatus"
+    ]
+  }
+  	path("/motions/:id") {
+    action: [
+      GET: "getMotionStatus"
+    ]
+  }
+  	path("/outlets/:id") {
+    action: [
+      GET: "getOutletStatus"
+    ]
+  }
+  	path("/outlets/:id/:command") {
+    action: [
+      GET: "updateOutlet"
+    ]
+  }
+  	path("/switches/:command") {
+    action: [
+      PUT: "updateSwitch"
+    ]
+  }
+}
+
+//API Methods
+def getAllDevices() {
+	def locks_list = locks.collect{device(it,"Lock")}
+    def presences_list = presence_sensors.collect{device(it,"Presence")}
+    def motions_list = motions.collect{device(it,"Motion")}
+    def outlets_list = outlets.collect{device(it,"Outlet")}
+    def switches_list = switches.collect{device(it,"Switch")}
+    def temp_list = temperature_sensors.collect{device(it,"Temperature")}
+    return [Locks: locks_list, Presences: presences_list, Motions: motions_list, Outlets: outlets_list, Switches: switches_list, Temperatures: temp_list]
+}
+
+//LOCKS
+def getDoorLockStatus() {
+	def device = locks.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('lock')]
+        }
+}
+
+def updateDoorLock() {
+	def command = params.command
+    def device = locks.find { it.id == params.id }
+    if (command){
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            if(command == "toggle")
+            {
+                if(device.currentValue('lock') == "locked")
+                  device.unlock();
+                else
+                  device.lock();
+                  
+                return [Device_id: params.id, result_action: "200"]
+            }
+        }
+    }
+}
+
+//PRESENCE
+def getPresenceStatus() {
+
+	def device = presence_sensors.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('presence')]
+   }
+}
+
+//MOTION
+def getMotionStatus() {
+
+	def device = motions.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('motion')]
+   }
+}
+
+//OUTLET
+def getOutletStatus() {
+	
+    def device = outlets.find { it.id == params.id }
+   	if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentSwitch, Current_watt: device.currentValue("energy")]
+  }
+}
+
+def updateOutlet() {
+	
+    def command = params.command
+    def device = outlets.find { it.id == params.id }
+    if (command){
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            if(command == "toggle")
+            {
+                if(device.currentSwitch == "on")
+                  device.off();
+                else
+                  device.on();
+                  
+                return [Device_id: params.id, result_action: "200"]
+            }
+        }
+    }
+}                
+
+//SWITCH
+def updateSwitch() {
+    def command = params.command
+    def device = switches.find { it.id == params.id }
+    if (command){
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            if(command == "toggle")
+            {
+                if(device.currentSwitch == "on")
+                  device.off();
+                else
+                  device.on();
+                  
+                return [Device_id: params.id, result_action: "200"]
+            }
+        }
+    }
+}
+
+//TEMPERATURE
+def getTempSensorsStatus() {
+	
+    def device = temperature_sensors.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('temperature')]
+   }
+}

smartapps/imbrianj/ready-for-rain.src/ready-for-rain.groovy

@@ -18,8 +18,13 @@ definition(
 )
 
 preferences {
-  section("Zip code?") {
-    input "zipcode", "text", title: "Zipcode?"
+
+  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
+		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
+	}
+
+  if (location.channelName != 'samsungtv') {
+		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
   }
 
   section("Things to check?") {
@@ -60,7 +65,11 @@ def scheduleCheck(evt) {
   // Only need to poll if we haven't checked in a while - and if something is left open.
   if((now() - (30 * 60 * 1000) > state.lastCheck["time"]) && open) {
     log.info("Something's open - let's check the weather.")
-    def response = getWeatherFeature("forecast", zipcode)
+    def response
+    if (location.channelName != 'samsungtv')
+      response = getWeatherFeature("forecast", zipCode)
+    else
+      response = getWeatherFeature("forecast")
     def weather  = isStormy(response)
 
     if(weather) {

smartapps/imbrianj/safe-watch.src/safe-watch.groovy

@@ -26,9 +26,9 @@ preferences {
   }
 
   section("Temperature monitor?") {
-    input "temp",    "capability.temperatureMeasurement", title: "Temp Sensor", required: false
-    input "maxTemp", "number",                            title: "Max Temp?",   required: false
-    input "minTemp", "number",                            title: "Min Temp?",   required: false
+    input "temp",    "capability.temperatureMeasurement", title: "Temperature Sensor", required: false
+    input "maxTemp", "number",                            title: "Max Temperature (°${location.temperatureScale})",   required: false
+    input "minTemp", "number",                            title: "Min Temperature (°${location.temperatureScale})",   required: false
   }
 
   section("When which people are away?") {

smartapps/juano2310/jawbone-button-notifier.src/jawbone-button-notifier.groovy

@@ -62,7 +62,7 @@ def initialize() {
 }
 
 def sendit(evt) {
-	log.debug "$evt.value: $evt, $settings"
+	log.debug "$evt.value: $evt"
 	sendMessage()
 }
 
@@ -80,6 +80,6 @@ def sendMessage() {
         sendSms phone3, msg
     }
     if (!phone1 && !phone2 && !phone3) {
-    	sendPush msg    
+    	sendPush msg
     }
 }

smartapps/juano2310/jawbone-up-connect.src/jawbone-up-connect.groovy

@@ -4,6 +4,9 @@
  *  Author: Juan Risso
  *  Date: 2013-12-19
  */
+
+include 'asynchttp_v1'
+
 definition(
 	name: "Jawbone UP (Connect)",
 	namespace: "juano2310",
@@ -28,7 +31,7 @@ mappings {
 	path("/receivedToken") { action: [ POST: "receivedToken", GET: "receivedToken"] }
 	path("/receiveToken") { action: [ POST: "receiveToken", GET: "receiveToken"] }
 	path("/hookCallback") { action: [ POST: "hookEventHandler", GET: "hookEventHandler"] }
-    path("/oauth/initialize") {action: [GET: "oauthInitUrl"]}    
+  path("/oauth/initialize") {action: [GET: "oauthInitUrl"]}
 	path("/oauth/callback") { action: [ GET: "callback" ] }
 }
 
@@ -44,7 +47,7 @@ def callback() {
 	} else {
 		log.warn "No authQueryString"
 	}
-	
+
 	if (state.JawboneAccessToken) {
 		log.debug "Access token already exists"
 		setup()
@@ -73,7 +76,7 @@ def callback() {
 
 def authPage() {
     log.debug "authPage"
-    def description = null          
+    def description = null
     if (state.JawboneAccessToken == null) {
 		if (!state.accessToken) {
 			log.debug "About to create access token"
@@ -82,12 +85,13 @@ def authPage() {
         description = "Click to enter Jawbone Credentials"
         def redirectUrl = buildRedirectUrl
         log.debug "RedirectURL = ${redirectUrl}"
-        def donebutton= state.JawboneAccessToken != null 
+        def donebutton= state.JawboneAccessToken != null
         return dynamicPage(name: "Credentials", title: "Jawbone UP", nextPage: null, uninstall: true, install: donebutton) {
+							 section { paragraph title: "Note:", "This device has not been officially tested and certified to “Work with SmartThings”. You can connect it to your SmartThings home but performance may vary and we will not be able to provide support or assistance." }
                section { href url:redirectUrl, style:"embedded", required:true, title:"Jawbone UP", state: hast ,description:description }
         }
     } else {
-        description = "Jawbone Credentials Already Entered." 
+        description = "Jawbone Credentials Already Entered."
         return dynamicPage(name: "Credentials", title: "Jawbone UP", uninstall: true, install:true) {
                section { href url: buildRedirectUrl("receivedToken"), style:"embedded", state: "complete", title:"Jawbone UP", description:description }
         }
@@ -107,7 +111,7 @@ def receiveToken(redirectUrl = null) {
     def params = [
       uri: "https://jawbone.com/auth/oauth2/token?${toQueryString(oauthParams)}",
     ]
-    httpGet(params) { response -> 
+    httpGet(params) { response ->
     	log.debug "${response.data}"
 		log.debug "Setting access token to ${response.data.access_token}, refresh token to ${response.data.refresh_token}"
     	state.JawboneAccessToken = response.data.access_token
@@ -149,7 +153,7 @@ def connectionStatus(message, redirectUrl = null) {
 			<meta http-equiv="refresh" content="3; url=${redirectUrl}" />
 		"""
 	}
-	
+
     def html = """
         <!DOCTYPE html>
         <html>
@@ -229,12 +233,12 @@ def validateCurrentToken() {
 	log.debug "validateCurrentToken"
     def url = "https://jawbone.com/nudge/api/v.1.1/users/@me/refreshToken"
     def requestBody = "secret=${appSettings.clientSecret}"
-	
+
 	try {
 		httpPost(uri: url, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],  body: requestBody) {response ->
 	    	if (response.status == 200) {
 				log.debug "${response.data}"
-				log.debug "Setting refresh token to ${response.data.data.refresh_token}"
+				log.debug "Setting refresh token"
 	     		state.refreshToken = response.data.data.refresh_token
 	        }
 	    }
@@ -258,7 +262,7 @@ def validateCurrentToken() {
 							state.remove("refreshToken")
 						}
 					} else {
-						log.debug "Setting access token to ${data.access_token}, refresh token to ${data.refresh_token}"
+						log.debug "Setting access token"
 						state.JawboneAccessToken = data.access_token
 						state.refreshToken = data.refresh_token
 					}
@@ -271,10 +275,10 @@ def validateCurrentToken() {
 }
 
 def initialize() {
-    log.debug "Callback URL - Webhook"  
-	def localServerUrl = getApiServerUrl() 
+    log.debug "Callback URL - Webhook"
+	def localServerUrl = getApiServerUrl()
 	def hookUrl = "${localServerUrl}/api/token/${state.accessToken}/smartapps/installations/${app.id}/hookCallback"
-    def webhook = "https://jawbone.com/nudge/api/v.1.1/users/@me/pubsub?webhook=$hookUrl"      
+    def webhook = "https://jawbone.com/nudge/api/v.1.1/users/@me/pubsub?webhook=$hookUrl"
 	httpPost(uri: webhook, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ])
 }
 
@@ -284,16 +288,16 @@ def setup() {
 
 	if (state.JawboneAccessToken) {
 		def urlmember = "https://jawbone.com/nudge/api/users/@me/"
-		def member = null    
-		httpGet(uri: urlmember, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response -> 
+		def member = null
+		httpGet(uri: urlmember, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
 		    member = response.data.data
 		}
-	
+
 		if (member) {
 			state.member = member
 			def externalId = "${app.id}.${member.xid}"
 
-			// find the appropriate child device based on my app id and the device network id 
+			// find the appropriate child device based on my app id and the device network id
 			def deviceWrapper = getChildDevice("${externalId}")
 
 			// invoke the generatePresenceEvent method on the child device
@@ -302,7 +306,8 @@ def setup() {
 			  	def childDevice = addChildDevice('juano2310', "Jawbone User", "${app.id}.${member.xid}",null,[name:"Jawbone UP - " + member.first, completedSetup: true])
 			    if (childDevice) {
 			       	log.debug "Child Device Successfully Created"
-			        generateInitialEvent (member, childDevice)
+			        childDevice?.generateSleepingEvent(false)
+                    pollChild(childDevice)
 			    }
 			}
 		}
@@ -312,7 +317,7 @@ def setup() {
 }
 
 def installed() {
-	
+
 	if (!state.accessToken) {
 		log.debug "About to create access token"
 		createAccessToken()
@@ -324,7 +329,7 @@ def installed() {
 }
 
 def updated() {
-	
+
 	if (!state.accessToken) {
 		log.debug "About to create access token"
 		createAccessToken()
@@ -348,128 +353,128 @@ def uninstalled() {
 }
 
 def pollChild(childDevice) {
-    def member = state.member 
-    generatePollingEvents (member, childDevice)   
+		def childMap = [ value: "$childDevice.device.deviceNetworkId}"]
+
+		def params = [
+				uri: 'https://jawbone.com',
+				path: '/nudge/api/users/@me/goals',
+				headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],
+				contentType: 'application/json'
+		]
+
+		asynchttp_v1.get('responseGoals', params, childMap)
+
+		def params2 = [
+				uri: 'https://jawbone.com',
+				path: '/nudge/api/users/@me/moves',
+				headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],
+				contentType: 'application/json'
+		]
+
+		asynchttp_v1.get('responseMoves', params2, childMap)
 }
 
-def generatePollingEvents (member, childDevice) {
-    // lets figure out if the member is currently "home" (At the place)
-    def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals" 
-    def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"  
-    def urlsleeps = "https://jawbone.com/nudge/api/users/@me/sleeps"     
-    def goals = null
-    def moves = null
- 	def sleeps = null   
-    httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response -> 
-        goals = response.data.data
-    }   
-    httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response -> 
-        moves = response.data.data.items[0]
-    }    
-   
-    try { // we are going to just ignore any errors
-        log.debug "Member = ${member.first}"
-        log.debug "Moves Goal = ${goals.move_steps} Steps"
-        log.debug "Moves = ${moves.details.steps} Steps" 
-
-        childDevice?.sendEvent(name:"steps", value: moves.details.steps)
-        childDevice?.sendEvent(name:"goal", value: goals.move_steps)
-    	//setColor(moves.details.steps,goals.move_steps,childDevice)
-    }
-    catch (e) {
-            // eat it
-    }       
+def responseGoals(response, dni) {
+	if (response.hasError()) {
+			log.error "response has error: $response.errorMessage"
+	} else {
+			def goals
+			try {
+					// json response already parsed into JSONElement object
+					goals = response.json.data
+			} catch (e) {
+					log.error "error parsing json from response: $e"
+			}
+			if (goals) {
+				def childDevice = getChildDevice(dni.value)
+				log.debug "Goal = ${goals.move_steps} Steps"
+				childDevice?.sendEvent(name:"goal", value: goals.move_steps)
+			} else {
+					log.debug "did not get json results from response body: $response.data"
+			}
+	}
 }
 
-def generateInitialEvent (member, childDevice) {
-    // lets figure out if the member is currently "home" (At the place)
-    def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals" 
-    def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"  
-    def urlsleeps = "https://jawbone.com/nudge/api/users/@me/sleeps"     
-    def goals = null
-    def moves = null
- 	def sleeps = null   
-    httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response -> 
-        goals = response.data.data
-    }   
-    httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response -> 
-        moves = response.data.data.items[0]
-    }    
-    
-    try { // we are going to just ignore any errors
-        log.debug "Member = ${member.first}"
-        log.debug "Moves Goal = ${goals.move_steps} Steps"
-        log.debug "Moves = ${moves.details.steps} Steps"
-        log.debug "Sleeping state = false"   
-        childDevice?.generateSleepingEvent(false)
-        childDevice?.sendEvent(name:"steps", value: moves.details.steps)
-        childDevice?.sendEvent(name:"goal", value: goals.move_steps)
-    	//setColor(moves.details.steps,goals.move_steps,childDevice)
-    }
-    catch (e) {
-            // eat it
-    }       
+def responseMoves(response, dni) {
+	if (response.hasError()) {
+			log.error "response has error: $response.errorMessage"
+	} else {
+			def moves
+			try {
+					// json response already parsed into JSONElement object
+					moves = response.json.data.items[0]
+			} catch (e) {
+					log.error "error parsing json from response: $e"
+			}
+			if (moves) {
+				def childDevice = getChildDevice(dni.value)
+				log.debug "Moves = ${moves.details.steps} Steps"
+				childDevice?.sendEvent(name:"steps", value: moves.details.steps)
+			} else {
+					log.debug "did not get json results from response body: $response.data"
+			}
+	}
 }
 
 def setColor (steps,goal,childDevice) {
     def result = steps * 100 / goal
-    if (result < 25) 
+    if (result < 25)
     	childDevice?.sendEvent(name:"steps", value: "steps", label: steps)
-    else if ((result >= 25) && (result < 50)) 
+    else if ((result >= 25) && (result < 50))
         childDevice?.sendEvent(name:"steps", value: "steps1", label: steps)
-    else if ((result >= 50) && (result < 75)) 
+    else if ((result >= 50) && (result < 75))
         childDevice?.sendEvent(name:"steps", value: "steps1", label: steps)
-    else if (result >= 75)     
-        childDevice?.sendEvent(name:"steps", value: "stepsgoal", label: steps)   
+    else if (result >= 75)
+        childDevice?.sendEvent(name:"steps", value: "stepsgoal", label: steps)
 }
 
 def hookEventHandler() {
     // log.debug "In hookEventHandler method."
     log.debug "request = ${request}"
-    
-    def json = request.JSON 
-    
+
+    def json = request.JSON
+
     // get some stuff we need
     def userId = json.events.user_xid[0]
     def	json_type = json.events.type[0]
-	def json_action = json.events.action[0]
+	  def json_action = json.events.action[0]
 
     //log.debug json
     log.debug "Userid = ${userId}"
     log.debug "Notification Type: " + json_type
-    log.debug "Notification Action: " + json_action 
-    
+    log.debug "Notification Action: " + json_action
+
     // find the appropriate child device based on my app id and the device network id
     def externalId = "${app.id}.${userId}"
     def childDevice = getChildDevice("${externalId}")
-            
+
     if (childDevice) {
-    	switch (json_action) {   
-	        case "enter_sleep_mode":      
-            	childDevice?.generateSleepingEvent(true)           
-                break           
-            case "exit_sleep_mode":       
-            	childDevice?.generateSleepingEvent(false) 
-                break 
-            case "creation": 
+    	switch (json_action) {
+	        case "enter_sleep_mode":
+            	childDevice?.generateSleepingEvent(true)
+                break
+            case "exit_sleep_mode":
+            	childDevice?.generateSleepingEvent(false)
+                break
+            case "creation":
                 childDevice?.sendEvent(name:"steps", value: 0)
           		break
             case "updation":
-                def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals"     
-                def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"       
+                def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals"
+                def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"
                 def goals = null
-                def moves = null    
-                httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response -> 
+                def moves = null
+                httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
  	               goals = response.data.data
-                }       
-                httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response -> 
+                }
+                httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
                    moves = response.data.data.items[0]
-                }        
+                }
                 log.debug "Goal = ${goals.move_steps} Steps"
-        		log.debug "Steps = ${moves.details.steps} Steps"
+        				log.debug "Steps = ${moves.details.steps} Steps"
                 childDevice?.sendEvent(name:"steps", value: moves.details.steps)
-                childDevice?.sendEvent(name:"goal", value: goals.move_steps)       
-                //setColor(moves.details.steps,goals.move_steps,childDevice)   
+                childDevice?.sendEvent(name:"goal", value: goals.move_steps)
+                //setColor(moves.details.steps,goals.move_steps,childDevice)
                 break
 			case "deletion":
 				app.delete()

smartapps/mangioneimagery/medicine-management-contact-sensor.src/medicine-management-contact-sensor.groovy

@@ -0,0 +1,188 @@
+/**
+ *  Medicine Management - Contact Sensor
+ *
+ *  Copyright 2016 Jim Mangione
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ * 
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ * Logic: 
+ * --- Send notification at the medicine reminder time IF draw wasn't alread opened in past 60 minutes
+ * --- If draw still isn't open 10 minutes AFTER reminder time, LED will turn RED.
+ * --- ----- Once draw IS open, LED will return back to it's original color
+ *
+ */
+import groovy.time.TimeCategory 
+
+definition(
+    name: "Medicine Management - Contact Sensor",
+    namespace: "MangioneImagery",
+    author: "Jim Mangione",
+    description: "This supports devices with capabilities of ContactSensor and ColorControl (LED). It sends an in-app and ambient light notification if you forget to open the drawer or cabinet where meds are stored. A reminder will be set to a single time per day. If the draw or cabinet isn't opened within 60 minutes of that reminder, an in-app message will be sent. If the draw or cabinet still isn't opened after an additional 10 minutes, then an LED light turns red until the draw or cabinet is opened",
+    category: "Health & Wellness",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+
+	section("My Medicine Draw/Cabinet"){
+		input "deviceContactSensor", "capability.contactSensor", title: "Opened Sensor" 
+	} 
+
+    section("Remind me to take my medicine at"){
+        input "reminderTime", "time", title: "Time"
+    }
+    
+    // NOTE: Use REAL device - virtual device causes compilation errors
+    section("My LED Light"){
+    	input "deviceLight", "capability.colorControl", title: "Smart light"
+    }
+
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+        
+	initialize()
+}
+
+def initialize() {
+
+    // will stop LED notification incase it was set by med reminder
+    subscribe(deviceContactSensor, "contact", contactHandler)
+
+    // how many minutes to look in the past from the reminder time, for an open draw
+    state.minutesToCheckOpenDraw = 60
+    
+    // is true when LED notification is set after exceeding 10 minutes past reminder time
+    state.ledNotificationTriggered = false
+    
+    // Set a timer to run once a day to notify if draw wasn't opened yet
+    schedule(reminderTime, checkOpenDrawInPast)
+   
+}
+
+// Should turn off any LED notification on OPEN state
+def contactHandler(evt){
+	if (evt.value == "open") {
+        // if LED notification triggered, reset it.
+        log.debug "Cabinet opened"
+        if (state.ledNotificationTriggered) {
+            resetLEDNotification()
+        }
+	}
+}
+
+// If the draw was NOT opened within 60 minutes of the timer send notification out.
+def checkOpenDrawInPast(){
+	log.debug "Checking past 60 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 60 minutes for any OPENED status
+    def cabinetOpened = isOpened(state.minutesToCheckOpenDraw)
+	log.debug "Cabinet found opened: $cabinetOpened"
+    
+    // if it's opened, then do nothing and assume they took their meds
+    if (!cabinetOpened) {    
+    	sendNotification("Hi, please remember to take your meds in the cabinet")
+       
+       // if no open activity, send out notification and set new reminder    
+        def reminderTimePlus10 = new Date(now() + (10 * 60000))
+
+        // needs to be scheduled if draw wasn't already opened
+        runOnce(reminderTimePlus10, checkOpenDrawAfterReminder)
+    }
+}
+
+// If the draw was NOT opened after 10 minutes past reminder, use LED notification
+def checkOpenDrawAfterReminder(){
+	log.debug "Checking additional 10 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 10 minutes for any OPENED status
+    def cabinetOpened = isOpened(10)    
+    
+   	log.debug "Cabinet found opened: $cabinetOpened"
+        
+    // if no open activity, blink lights
+    if (!cabinetOpened) {
+    	log.debug "Set LED to Notification color"
+        setLEDNotification()
+    }
+    
+}
+
+// Helper function for sending out an app notification
+def sendNotification(msg){
+        log.debug "Message Sent: $msg"
+        sendPush(msg)
+}
+
+// Check if the sensor has been opened since the minutes entered
+// Return true if opened found, else false.
+def isOpened(minutes){
+    // query last X minutes of activity log    
+    def previousDateTime = new Date(now() - (minutes * 60000))
+    
+    // capture all events recorded
+    def evts = deviceContactSensor.eventsSince(previousDateTime)   
+    def cabinetOpened = false
+    if (evts.size() > 0) {
+        evts.each{
+            if(it.value == "open") {
+                cabinetOpened = true 
+            }
+        }
+	}
+    
+    return cabinetOpened
+}
+
+// Saves current color and sets the light to RED
+def setLEDNotification(){
+
+	state.ledNotificationTriggered = true
+    
+	// turn light back off when reset is called if it was originally off
+ 	state.ledState = deviceLight.currentValue("switch")
+
+	// set light to RED and store original color until stopped    
+    state.origColor = deviceLight.currentValue("hue")
+    deviceLight.on()
+    deviceLight.setHue(100)
+    
+    log.debug "LED set to RED. Original color stored: $state.origColor"
+
+}
+
+// Sets the color back to the original saved color
+def resetLEDNotification(){
+
+	state.ledNotificationTriggered = false
+    
+    // return color to original
+    log.debug "Reset LED color to: $state.origColor"
+    if (state.origColor != null) {
+    	deviceLight.setHue(state.origColor)
+    }
+    
+    // if the light was turned on just for the notification, turn it back off now
+    if (state.ledState == "off") {
+    	deviceLight.off()
+    }
+
+}

smartapps/mangioneimagery/medicine-management-temp-motion.src/medicine-management-temp-motion.groovy

@@ -0,0 +1,189 @@
+/**
+ *  Medicine Management - Temp-Motion
+ *
+ *  Copyright 2016 Jim Mangione
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ * 
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ * Logic: 
+ * --- If temp > threshold set, send notification
+ * --- Send in-app notification at the medicine reminder time if no motion is detected in past 60 minutes
+ * --- If motion still isn't detected 10 minutes AFTER reminder time, LED will turn RED
+ * --- ----- Once motion is detected, LED will turn back to it's original color
+ */
+import groovy.time.TimeCategory 
+
+definition(
+    name: "Medicine Management - Temp-Motion",
+    namespace: "MangioneImagery",
+    author: "Jim Mangione",
+    description: "This only supports devices with capabilities TemperatureMeasurement, AccelerationSensor and ColorControl (LED). Supports two use cases. First, will notifies via in-app if the fridge where meds are stored exceeds a temperature threshold set in degrees. Secondly, sends an in-app and ambient light notification if you forget to take your meds by sensing movement of the medicine box in the fridge. A reminder will be set to a single time per day. If the box isn't moved within 60 minutes of that reminder, an in-app message will be sent. If the box still isn't moved after an additional 10 minutes, then an LED light turns red until the box is moved",
+    category: "Health & Wellness",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+ 
+     section("My Medicine in the Refrigerator"){
+		input "deviceAccelerationSensor", "capability.accelerationSensor", required: true, multiple: false, title: "Movement"
+        input "deviceTemperatureMeasurement", "capability.temperatureMeasurement", required: true, multiple: false, title: "Temperature"
+	} 
+
+	section("Temperature Threshold"){
+    	input "tempThreshold", "number", title: "Temperature Threshold"
+    }
+
+    section("Remind me to take my medicine at"){
+        input "reminderTime", "time", title: "Time"
+    }
+    
+    // NOTE: Use REAL device - virtual device causes compilation errors
+    section("My LED Light"){
+    	input "deviceLight", "capability.colorControl", title: "Smart light"
+    }    
+
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+        
+	initialize()
+}
+
+def initialize() {
+	// will notify when temp exceeds max
+    subscribe(deviceTemperatureMeasurement, "temperature", tempHandler)
+
+    // will stop LED notification incase it was set by med reminder
+    subscribe(deviceAccelerationSensor, "acceleration.active", motionHandler)
+    
+    // how many minutes to look in the past from the reminder time
+    state.minutesToCheckPriorToReminder = 60
+    
+    // Set a timer to run once a day to notify if draw wasn't opened yet
+    schedule(reminderTime, checkMotionInPast)
+}
+
+
+// If temp > 39 then send an app notification out.
+def tempHandler(evt){
+	if (evt.doubleValue > tempThreshold) {
+    	log.debug "Fridge temp of $evt.value exceeded threshold"
+   		sendNotification("WARNING: Fridge temp is $evt.value with threshold of $tempThreshold")
+	}
+}
+
+// Should turn off any LED notification once motion detected
+def motionHandler(evt){
+    // always call out to stop any possible LED notification
+	log.debug "Medication moved. Send stop LED notification"
+    resetLEDNotification()
+}
+
+// If no motion detected within 60 minutes of the timer send notification out.
+def checkMotionInPast(){
+	log.debug "Checking past 60 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 60 minutes for any OPENED status
+    def movement = isMoved(state.minutesToCheckPriorToReminder)
+	log.debug "Motion found: $movement"
+    
+    // if there was movement, then do nothing and assume they took their meds
+    if (!movement) {    
+    	sendNotification("Hi, please remember to take your meds in the fridge")
+    
+        // if no movement, send out notification and set new reminder    
+        def reminderTimePlus10 = new Date(now() + (10 * 60000))
+
+        // needs to be scheduled if draw wasn't already opened
+        runOnce(reminderTimePlus10, checkMotionAfterReminder)
+    }
+}
+
+// If still no movement after 10 minutes past reminder, use LED notification
+def checkMotionAfterReminder(){
+	log.debug "Checking additional 10 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 10 minutes for any OPENED status
+    def movement = isMoved(10)    
+    
+   	log.debug "Motion found: $movement"
+        
+    // if no open activity, blink lights
+    if (!movement) {
+    	log.debug "Notify LED API"
+        setLEDNotification()
+    }
+    
+}
+
+// Helper function for sending out an app notification
+def sendNotification(msg){
+        log.debug "Message Sent: $msg"
+        sendPush(msg)
+}
+
+// Check if the accelerometer has been activated since the minutes entered
+// Return true if active, else false.
+def isMoved(minutes){
+    // query last X minutes of activity log    
+    def previousDateTime = new Date(now() - (minutes * 60000))
+    
+    // capture all events recorded
+    def evts = deviceAccelerationSensor.eventsSince(previousDateTime)   
+    def motion = false
+    if (evts.size() > 0) {
+        evts.each{
+            if(it.value == "active") {
+                motion = true 
+            }
+        }
+	}
+    
+    return motion
+}
+
+// Saves current color and sets the light to RED
+def setLEDNotification(){
+
+	// turn light back off when reset is called if it was originally off
+ 	state.ledState = deviceLight.currentValue("switch")
+
+	// set light to RED and store original color until stopped    
+    state.origColor = deviceLight.currentValue("hue")
+    deviceLight.on()
+    deviceLight.setHue(100)
+    
+    log.debug "LED set to RED. Original color stored: $state.origColor"
+
+}
+
+// Sets the color back to the original saved color
+def resetLEDNotification(){
+
+    // return color to original
+    log.debug "Reset LED color to: $state.origColor"
+    deviceLight.setHue(state.origColor)
+    
+    // if the light was turned on just for the notification, turn it back off now
+    if (state.ledState == "off") {
+    	deviceLight.off()
+    }
+}

smartapps/michaelstruck/smart-home-ventilation.src/smart-home-ventilation.groovy

@@ -14,7 +14,7 @@
  *	for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
 definition(
 	name: "Smart Home Ventilation",
     namespace: "MichaelStruck",
@@ -164,7 +164,7 @@ def installed() {
 def updated() {
     unschedule()
     turnOffSwitch() //Turn off all switches if the schedules are changed while in mid-schedule
-    unsubscribe
+    unsubscribe()
     log.debug "Updated with settings: ${settings}"
     init()
 }
@@ -174,12 +174,12 @@ def init() {
     schedule (midnightTime, midNight)
 	subscribe(location, "mode", locationHandler)
     startProcess()
-}    
+}
 
 // Common methods
 
 def startProcess () {
-    createDayArray() 
+    createDayArray()
 	state.dayCount=state.data.size()
     if (state.dayCount){
 		state.counter = 0
@@ -190,7 +190,7 @@ def startProcess () {
 def startDay() {
 	def start = convertEpoch(state.data[state.counter].start)
 	def stop = convertEpoch(state.data[state.counter].stop)
-      
+
     runOnce(start, turnOnSwitch, [overwrite: true])
     runOnce(stop, incDay, [overwrite: true])
 }
@@ -218,7 +218,7 @@ def locationHandler(evt) {
     }
 	if (!result) {
     	startProcess()
-    }	
+    }
 }
 
 def midNight(){
@@ -238,7 +238,7 @@ def turnOffSwitch() {
     }
     log.debug "Home ventilation switches are off."
 }
-    
+
 def schedDesc(on1, off1, on2, off2, on3, off3, on4, off4, modeList, dayList) {
 	def title = ""
 	def dayListClean = "On "
@@ -252,7 +252,7 @@ def schedDesc(on1, off1, on2, off2, on3, off3, on4, off4, modeList, dayList) {
             	dayListClean = "${dayListClean}, "
             }
         }
-	} 
+	}
     else {
     	dayListClean = "Every day"
     }
@@ -272,7 +272,7 @@ def schedDesc(on1, off1, on2, off2, on3, off3, on4, off4, modeList, dayList) {
             	modeListClean = "${modeListClean} ${modePrefix}"
         	}
         }
-	} 
+	}
     else {
     	modeListClean = "${modeListClean}all modes"
     }
@@ -283,16 +283,16 @@ def schedDesc(on1, off1, on2, off2, on3, off3, on4, off4, modeList, dayList) {
     	title += "\nSchedule 2: ${humanReadableTime(on2)} to ${humanReadableTime(off2)}"
     }
     if (on3 && off3) {
-    	title += "\nSchedule 3: ${humanReadableTime(on3)} to ${humanReadableTime(off3)}" 
+    	title += "\nSchedule 3: ${humanReadableTime(on3)} to ${humanReadableTime(off3)}"
     }
     if (on4 && off4) {
-    	title += "\nSchedule 4: ${humanReadableTime(on4)} to ${humanReadableTime(off4)}" 
+    	title += "\nSchedule 4: ${humanReadableTime(on4)} to ${humanReadableTime(off4)}"
     }
     if (on1 || on2 || on3 || on4) {
     	title += "\n$modeListClean"
-    	title += "\n$dayListClean" 
+    	title += "\n$dayListClean"
     }
-    
+
     if (!on1 && !on2 && !on3 && !on4) {
     	title="Click to configure scenario"
     }
@@ -374,7 +374,7 @@ def createDayArray() {
            timeOk(timeOnD1, timeOffD1)
            timeOk(timeOnD2, timeOffD2)
            timeOk(timeOnD3, timeOffD3)
-           timeOk(timeOnD4, timeOffD4)        
+           timeOk(timeOnD4, timeOffD4)
         }
     }
     state.data.sort{it.start}
@@ -384,7 +384,7 @@ def createDayArray() {
 
 private def textAppName() {
 	def text = "Smart Home Ventilation"
-}	
+}
 
 private def textVersion() {
     def text = "Version 2.1.2 (05/31/2015)"
@@ -416,4 +416,4 @@ private def textHelp() {
         "that each scenario does not overlap and run in separate modes (i.e. Home, Out of town, etc). Also note that you should  " +
         "avoid scheduling the ventilation fan at exactly midnight; the app resets itself at that time. It is suggested to start any new schedule " +
         "at 12:15 am or later."
-}
+}

smartapps/resteele/monitor-on-sense.src/monitor-on-sense.groovy

@@ -17,7 +17,7 @@ definition(
     name: "Monitor on Sense",
     namespace: "resteele",
     author: "Rachel Steele",
-    description: "Turn on Monitor when vibration is sensed",
+    description: "Turn on switch when vibration is sensed",
     category: "My Apps",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
@@ -25,10 +25,10 @@ definition(
 
 
 preferences {
-	section("When the keyboard is used...") {
+	section("When vibration is sensed...") {
 		input "accelerationSensor", "capability.accelerationSensor", title: "Which Sensor?"
 	}
-section("Turn on/off a light...") {
+section("Turn on switch...") {
 		input "switch1", "capability.switch"
 	}
 }
@@ -47,5 +47,3 @@ def updated() {
 def accelerationActiveHandler(evt) {
 		switch1.on()
 	}
-
-

smartapps/sheikhsphere/smart-humidifier.src/smart-humidifier.groovy

@@ -77,7 +77,7 @@ def humidityHandler(evt) {
 
 		} else {
          	if (state.lastStatus != "off") {
-                log.debug "Humidity Rose Above $humidityHigh1:  sending SMS to $phone1 and deactivating $mySwitch"
+                log.debug "Humidity Rose Above $humidityHigh1:  sending SMS and deactivating $mySwitch"
                 send("${humiditySensor1.label} sensed high humidity level of ${evt.value}, turning off ${switch1.label}")
                 switch1?.off()
                 state.lastStatus = "off"
@@ -99,7 +99,7 @@ def humidityHandler(evt) {
 
 		} else {
         	if (state.lastStatus != "on") {
-                log.debug "Humidity Dropped Below $humidityLow1:  sending SMS to $phone1 and activating $mySwitch"
+                log.debug "Humidity Dropped Below $humidityLow1:  sending SMS and activating $mySwitch"
                 send("${humiditySensor1.label} sensed low humidity level of ${evt.value}, turning on ${switch1.label}")
                 switch1?.on()
                 state.lastStatus = "on"
@@ -125,4 +125,4 @@ private send(msg) {
     }
 
     log.debug msg
-}
+}

smartapps/smartthings/beacon-control.src/beacon-control.groovy

@@ -114,13 +114,16 @@ def beaconHandler(evt) {
 
 	if (allOk) {
 		def data = new groovy.json.JsonSlurper().parseText(evt.data)
-		log.debug "<beacon-control> data: $data - phones: " + phones*.deviceNetworkId
+                // removed logging of device names. can be added back for debugging
+		//log.debug "<beacon-control> data: $data - phones: " + phones*.deviceNetworkId
 
 		def beaconName = getBeaconName(evt)
-		log.debug "<beacon-control> beaconName: $beaconName"
+                // removed logging of device names. can be added back for debugging
+		//log.debug "<beacon-control> beaconName: $beaconName"
 
 		def phoneName = getPhoneName(data)
-		log.debug "<beacon-control> phoneName: $phoneName"
+                // removed logging of device names. can be added back for debugging
+		//log.debug "<beacon-control> phoneName: $phoneName"
 		if (phoneName != null) {
             def action = data.presence == "1" ? "arrived" : "left"
             def msg = "$phoneName has $action ${action == 'arrived' ? 'at ' : ''}the $beaconName"

smartapps/smartthings/bon-voyage.src/bon-voyage.groovy

@@ -49,13 +49,15 @@ preferences {
 
 def installed() {
 	log.debug "Installed with settings: ${settings}"
-	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+        // commented out log statement because presence sensor label could contain user's name
+	//log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	subscribe(people, "presence", presence)
 }
 
 def updated() {
 	log.debug "Updated with settings: ${settings}"
-	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+        // commented out log statement because presence sensor label could contain user's name
+	//log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	unsubscribe()
 	subscribe(people, "presence", presence)
 }

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -66,7 +66,7 @@ def authPage() {
 	// get rid of next button until the user is actually auth'd
 	if (!oauthTokenProvided) {
 		return dynamicPage(name: "auth", title: "Login", nextPage: "", uninstall:uninstallAllowed) {
-			section(){
+			section() {
 				paragraph "Tap below to log in to the ecobee service and authorize SmartThings access. Be sure to scroll down on page 2 and press the 'Allow' button."
 				href url:redirectUrl, style:"embedded", required:true, title:"ecobee", description:description
 			}
@@ -76,7 +76,7 @@ def authPage() {
 		log.debug "thermostat list: $stats"
 		log.debug "sensor list: ${sensorsDiscovered()}"
 		return dynamicPage(name: "auth", title: "Select Your Thermostats", uninstall: true) {
-			section(""){
+			section("") {
 				paragraph "Tap below to see the list of ecobee thermostats available in your ecobee account and select the ones you want to connect to SmartThings."
 				input(name: "thermostats", title:"", type: "enum", required:true, multiple:true, description: "Tap to choose", metadata:[values:stats])
 			}
@@ -84,7 +84,7 @@ def authPage() {
 			def options = sensorsDiscovered() ?: []
 			def numFound = options.size() ?: 0
 			if (numFound > 0)  {
-				section(""){
+				section("") {
 					paragraph "Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings."
 					input(name: "ecobeesensors", title:"Select Ecobee Sensors (${numFound} found)", type: "enum", required:false, description: "Tap to choose", multiple:true, options:options)
 				}
@@ -115,13 +115,12 @@ def callback() {
 	def code = params.code
 	def oauthState = params.state
 
-	if (oauthState == atomicState.oauthInitState){
-
+	if (oauthState == atomicState.oauthInitState) {
 		def tokenParams = [
-				grant_type: "authorization_code",
-				code      : code,
-				client_id : smartThingsClientId,
-				redirect_uri: callbackUrl
+			grant_type: "authorization_code",
+			code      : code,
+			client_id : smartThingsClientId,
+			redirect_uri: callbackUrl
 		]
 
 		def tokenUrl = "https://www.ecobee.com/home/token?${toQueryString(tokenParams)}"
@@ -129,9 +128,6 @@ def callback() {
 		httpPost(uri: tokenUrl) { resp ->
 			atomicState.refreshToken = resp.data.refresh_token
 			atomicState.authToken = resp.data.access_token
-			log.debug "swapped token: $resp.data"
-			log.debug "atomicState.refreshToken: ${atomicState.refreshToken}"
-			log.debug "atomicState.authToken: ${atomicState.authToken}"
 		}
 
 		if (atomicState.authToken) {
@@ -148,8 +144,8 @@ def callback() {
 
 def success() {
 	def message = """
-    <p>Your ecobee Account is now connected to SmartThings!</p>
-    <p>Click 'Done' to finish setup.</p>
+        <p>Your ecobee Account is now connected to SmartThings!</p>
+        <p>Click 'Done' to finish setup.</p>
     """
 	connectionStatus(message)
 }
@@ -171,64 +167,63 @@ def connectionStatus(message, redirectUrl = null) {
 	}
 
 	def html = """
-<!DOCTYPE html>
-<html>
-<head>
-<meta name="viewport" content="width=640">
-<title>Ecobee & SmartThings connection</title>
-<style type="text/css">
-        @font-face {
-                font-family: 'Swiss 721 W01 Thin';
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
-                         url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
-                         url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
-                         url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
-                font-weight: normal;
-                font-style: normal;
-        }
-        @font-face {
-                font-family: 'Swiss 721 W01 Light';
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
-                         url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
-                         url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
-                         url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
-                font-weight: normal;
-                font-style: normal;
-        }
-        .container {
-                width: 90%;
-                padding: 4%;
-                /*background: #eee;*/
-                text-align: center;
-        }
-        img {
-                vertical-align: middle;
-        }
-        p {
-                font-size: 2.2em;
-                font-family: 'Swiss 721 W01 Thin';
-                text-align: center;
-                color: #666666;
-                padding: 0 40px;
-                margin-bottom: 0;
-        }
-        span {
-                font-family: 'Swiss 721 W01 Light';
-        }
-</style>
-</head>
-<body>
-        <div class="container">
+        <!DOCTYPE html>
+        <html>
+            <head>
+                <meta name="viewport" content="width=640">
+                <title>Ecobee & SmartThings connection</title>
+                <style type="text/css">
+                    @font-face {
+                        font-family: 'Swiss 721 W01 Thin';
+                        src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+                        src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+                        url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+                        url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+                        url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+                        font-weight: normal;
+                        font-style: normal;
+                    }
+                    @font-face {
+                        font-family: 'Swiss 721 W01 Light';
+                        src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+                        src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+                        url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+                        url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+                        url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+                        font-weight: normal;
+                        font-style: normal;
+                    }
+                    .container {
+                        width: 90%;
+                        padding: 4%;
+                        text-align: center;
+                    }
+                    img {
+                        vertical-align: middle;
+                    }
+                    p {
+                        font-size: 2.2em;
+                        font-family: 'Swiss 721 W01 Thin';
+                        text-align: center;
+                        color: #666666;
+                        padding: 0 40px;
+                        margin-bottom: 0;
+                    }
+                    span {
+                        font-family: 'Swiss 721 W01 Light';
+                    }
+                </style>
+            </head>
+        <body>
+            <div class="container">
                 <img src="https://s3.amazonaws.com/smartapp-icons/Partner/ecobee%402x.png" alt="ecobee icon" />
                 <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
                 <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
                 ${message}
-        </div>
-</body>
-</html>
-"""
+            </div>
+        </body>
+    </html>
+    """
 
 	render contentType: 'text/html', data: html
 }
@@ -237,19 +232,26 @@ def getEcobeeThermostats() {
 	log.debug "getting device list"
 	atomicState.remoteSensors = []
 
-	def requestBody = '{"selection":{"selectionType":"registered","selectionMatch":"","includeRuntime":true,"includeSensors":true}}'
-
+    def bodyParams = [
+        selection: [
+            selectionType: "registered",
+            selectionMatch: "",
+            includeRuntime: true,
+            includeSensors: true
+        ]
+    ]
 	def deviceListParams = [
-			uri: apiEndpoint,
-			path: "/1/thermostat",
-			headers: ["Content-Type": "text/json", "Authorization": "Bearer ${atomicState.authToken}"],
-			query: [format: 'json', body: requestBody]
+		uri: apiEndpoint,
+		path: "/1/thermostat",
+		headers: ["Content-Type": "text/json", "Authorization": "Bearer ${atomicState.authToken}"],
+        // TODO - the query string below is not consistent with the Ecobee docs:
+        // https://www.ecobee.com/home/developer/api/documentation/v1/operations/get-thermostats.shtml
+		query: [format: 'json', body: toJson(bodyParams)]
 	]
 
 	def stats = [:]
 	try {
 		httpGet(deviceListParams) { resp ->
-
 			if (resp.status == 200) {
 				resp.data.thermostatList.each { stat ->
 					atomicState.remoteSensors = atomicState.remoteSensors == null ? stat.remoteSensors : atomicState.remoteSensors <<  stat.remoteSensors
@@ -289,9 +291,10 @@ Map sensorsDiscovered() {
 }
 
 def getThermostatDisplayName(stat) {
-	if(stat?.name)
-		return stat.name.toString()
-	return (getThermostatTypeName(stat) + " (${stat.identifier})").toString()
+    if(stat?.name) {
+        return stat.name.toString()
+    }
+    return (getThermostatTypeName(stat) + " (${stat.identifier})").toString()
 }
 
 def getThermostatTypeName(stat) {
@@ -310,7 +313,6 @@ def updated() {
 }
 
 def initialize() {
-
 	log.debug "initialize"
 	def devices = thermostats.collect { dni ->
 		def d = getChildDevice(dni)
@@ -350,8 +352,6 @@ def initialize() {
 	log.warn "delete: ${delete}, deleting ${delete.size()} thermostats"
 	delete.each { deleteChildDevice(it.deviceNetworkId) } //inherits from SmartApp (data-management)
 
-	atomicState.thermostatData = [:] //reset Map to store thermostat data
-
 	//send activity feeds to tell that device is connected
 	def notificationMessage = "is connected to SmartThings"
 	sendActivityFeeds(notificationMessage)
@@ -381,75 +381,41 @@ def pollHandler() {
 }
 
 def pollChildren(child = null) {
-	def thermostatIdsString = getChildDeviceIdsString()
-	log.debug "polling children: $thermostatIdsString"
-	def data = ""
+    def thermostatIdsString = getChildDeviceIdsString()
+    log.debug "polling children: $thermostatIdsString"
+
+    def requestBody = [
+        selection: [
+            selectionType: "thermostats",
+            selectionMatch: thermostatIdsString,
+            includeExtendedRuntime: true,
+            includeSettings: true,
+            includeRuntime: true,
+            includeSensors: true
+        ]
+    ]
 
-	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + thermostatIdsString + '","includeExtendedRuntime":"true","includeSettings":"true","includeRuntime":"true","includeSensors":true}}'
 	def result = false
 
 	def pollParams = [
-			uri: apiEndpoint,
-			path: "/1/thermostat",
-			headers: ["Content-Type": "text/json", "Authorization": "Bearer ${atomicState.authToken}"],
-			query: [format: 'json', body: jsonRequestBody]
-	]
+        uri: apiEndpoint,
+        path: "/1/thermostat",
+        headers: ["Content-Type": "text/json", "Authorization": "Bearer ${atomicState.authToken}"],
+        // TODO - the query string below is not consistent with the Ecobee docs:
+        // https://www.ecobee.com/home/developer/api/documentation/v1/operations/get-thermostats.shtml
+        query: [format: 'json', body: toJson(requestBody)]
+    ]
 
 	try{
 		httpGet(pollParams) { resp ->
 			if(resp.status == 200) {
-				log.debug "poll results returned resp.data ${resp.data}"
-				atomicState.remoteSensors = resp.data.thermostatList.remoteSensors
-				atomicState.thermostatData = resp.data
-				updateSensorData()
-				atomicState.thermostats = resp.data.thermostatList.inject([:]) { collector, stat ->
-					def dni = [ app.id, stat.identifier ].join('.')
-
-					log.debug "updating dni $dni"
-
-					data = [
-							coolMode: (stat.settings.coolStages > 0),
-							heatMode: (stat.settings.heatStages > 0),
-							deviceTemperatureUnit: stat.settings.useCelsius,
-							minHeatingSetpoint: (stat.settings.heatRangeLow / 10),
-							maxHeatingSetpoint: (stat.settings.heatRangeHigh / 10),
-							minCoolingSetpoint: (stat.settings.coolRangeLow / 10),
-							maxCoolingSetpoint: (stat.settings.coolRangeHigh / 10),
-							autoMode: stat.settings.autoHeatCoolFeatureEnabled,
-							auxHeatMode: (stat.settings.hasHeatPump) && (stat.settings.hasForcedAir || stat.settings.hasElectric || stat.settings.hasBoiler),
-							temperature: (stat.runtime.actualTemperature / 10),
-							heatingSetpoint: stat.runtime.desiredHeat / 10,
-							coolingSetpoint: stat.runtime.desiredCool / 10,
-							thermostatMode: stat.settings.hvacMode,
-							humidity: stat.runtime.actualHumidity,
-							thermostatFanMode: stat.runtime.desiredFanMode
-					]
-
-					if (location.temperatureScale == "F")
-					{
-						data["temperature"] = data["temperature"] ? Math.round(data["temperature"].toDouble()) : data["temperature"]
-						data["heatingSetpoint"] = data["heatingSetpoint"] ? Math.round(data["heatingSetpoint"].toDouble()) : data["heatingSetpoint"]
-						data["coolingSetpoint"] = data["coolingSetpoint"] ? Math.round(data["coolingSetpoint"].toDouble()) : data["coolingSetpoint"]
-						data["minHeatingSetpoint"] = data["minHeatingSetpoint"] ? Math.round(data["minHeatingSetpoint"].toDouble()) : data["minHeatingSetpoint"]
-						data["maxHeatingSetpoint"] = data["maxHeatingSetpoint"] ? Math.round(data["maxHeatingSetpoint"].toDouble()) : data["maxHeatingSetpoint"]
-						data["minCoolingSetpoint"] = data["minCoolingSetpoint"] ? Math.round(data["minCoolingSetpoint"].toDouble()) : data["minCoolingSetpoint"]
-						data["maxCoolingSetpoint"] = data["maxCoolingSetpoint"] ? Math.round(data["maxCoolingSetpoint"].toDouble()) : data["maxCoolingSetpoint"]
-
-					}
-
-					if (data?.deviceTemperatureUnit == false && location.temperatureScale == "F") {
-						data["deviceTemperatureUnit"] = "F"
-
-					} else {
-						data["deviceTemperatureUnit"] = "C"
-					}
-
-					collector[dni] = [data:data]
-					return collector
-				}
-				result = true
-				log.debug "updated ${atomicState.thermostats?.size()} stats: ${atomicState.thermostats}"
-			}
+                log.debug "poll results returned resp.data ${resp.data}"
+                atomicState.remoteSensors = resp.data.thermostatList.remoteSensors
+                updateSensorData()
+                storeThermostatData(resp.data.thermostatList)
+                result = true
+                log.debug "updated ${atomicState.thermostats?.size()} stats: ${atomicState.thermostats}"
+            }
 		}
 	} catch (groovyx.net.http.HttpResponseException e) {
 		log.trace "Exception polling children: " + e.response.data.status
@@ -463,13 +429,12 @@ def pollChildren(child = null) {
 }
 
 // Poll Child is invoked from the Child Device itself as part of the Poll Capability
-def pollChild(){
-
+def pollChild() {
 	def devices = getChildDevices()
 
-	if (pollChildren()){
+	if (pollChildren()) {
 		devices.each { child ->
-			if (!child.device.deviceNetworkId.startsWith("ecobee_sensor")){
+			if (!child.device.deviceNetworkId.startsWith("ecobee_sensor")) {
 				if(atomicState.thermostats[child.device.deviceNetworkId] != null) {
 					def tData = atomicState.thermostats[child.device.deviceNetworkId]
 					log.info "pollChild(child)>> data for ${child.device.deviceNetworkId} : ${tData.data}"
@@ -492,36 +457,7 @@ void poll() {
 }
 
 def availableModes(child) {
-
 	debugEvent ("atomicState.thermostats = ${atomicState.thermostats}")
-
-	debugEvent ("Child DNI = ${child.device.deviceNetworkId}")
-
-	def tData = atomicState.thermostats[child.device.deviceNetworkId]
-
-	debugEvent("Data = ${tData}")
-
-	if(!tData)
-	{
-		log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId} after polling"
-
-		return null
-	}
-
-	def modes = ["off"]
-
-	if (tData.data.heatMode) modes.add("heat")
-	if (tData.data.coolMode) modes.add("cool")
-	if (tData.data.autoMode) modes.add("auto")
-	if (tData.data.auxHeatMode) modes.add("auxHeatOnly")
-
-	modes
-
-}
-
-def currentMode(child) {
-	debugEvent ("atomicState.Thermos = ${atomicState.thermostats}")
-
 	debugEvent ("Child DNI = ${child.device.deviceNetworkId}")
 
 	def tData = atomicState.thermostats[child.device.deviceNetworkId]
@@ -530,14 +466,42 @@ def currentMode(child) {
 
 	if(!tData) {
 		log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId} after polling"
+		return null
+	}
 
+	def modes = ["off"]
 
+    if (tData.data.heatMode) {
+        modes.add("heat")
+    }
+    if (tData.data.coolMode) {
+        modes.add("cool")
+    }
+    if (tData.data.autoMode) {
+        modes.add("auto")
+    }
+    if (tData.data.auxHeatMode) {
+        modes.add("auxHeatOnly")
+    }
+
+    return modes
+}
+
+def currentMode(child) {
+	debugEvent ("atomicState.Thermos = ${atomicState.thermostats}")
+	debugEvent ("Child DNI = ${child.device.deviceNetworkId}")
+
+	def tData = atomicState.thermostats[child.device.deviceNetworkId]
+
+	debugEvent("Data = ${tData}")
+
+	if(!tData) {
+		log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId} after polling"
 		return null
 	}
 
 	def mode = tData.data.thermostatMode
-
-	mode
+	return mode
 }
 
 def updateSensorData() {
@@ -558,12 +522,12 @@ def updateSensorData() {
 							}
 
 						}
-
 					} else if (it.type == "occupancy") {
-						if(it.value == "true")
-							occupancy = "active"
-						else
+						if(it.value == "true") {
+                            occupancy = "active"
+                        } else {
 							occupancy = "inactive"
+                        }
 					}
 				}
 				def dni = "ecobee_sensor-"+ it?.id + "-" + it?.code
@@ -582,7 +546,7 @@ def getChildDeviceIdsString() {
 }
 
 def toJson(Map m) {
-	return new org.json.JSONObject(m).toString()
+    return groovy.json.JsonOutput.toJson(m)
 }
 
 def toQueryString(Map m) {
@@ -595,54 +559,24 @@ private refreshAuthToken() {
 	if(!atomicState.refreshToken) {
 		log.warn "Can not refresh OAuth token since there is no refreshToken stored"
 	} else {
-
 		def refreshParams = [
-				method: 'POST',
-				uri   : apiEndpoint,
-				path  : "/token",
-				query : [grant_type: 'refresh_token', code: "${atomicState.refreshToken}", client_id: smartThingsClientId],
+			method: 'POST',
+			uri   : apiEndpoint,
+			path  : "/token",
+			query : [grant_type: 'refresh_token', code: "${atomicState.refreshToken}", client_id: smartThingsClientId],
 		]
 
-		log.debug refreshParams
-
 		def notificationMessage = "is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials."
 		//changed to httpPost
 		try {
 			def jsonMap
 			httpPost(refreshParams) { resp ->
-
 				if(resp.status == 200) {
 					log.debug "Token refreshed...calling saved RestAction now!"
-
 					debugEvent("Token refreshed ... calling saved RestAction now!")
-
-					log.debug resp
-
-					jsonMap = resp.data
-
-					if(resp.data) {
-
-						log.debug resp.data
-						debugEvent("Response = ${resp.data}")
-
-						atomicState.refreshToken = resp?.data?.refresh_token
-						atomicState.authToken = resp?.data?.access_token
-
-						debugEvent("Refresh Token = ${atomicState.refreshToken}")
-						debugEvent("OAUTH Token = ${atomicState.authToken}")
-
-						if(atomicState.action && atomicState.action != "") {
-							log.debug "Executing next action: ${atomicState.action}"
-
-							"${atomicState.action}"()
-
-							atomicState.action = ""
-						}
-
-					}
-					atomicState.action = ""
-				}
-			}
+					saveTokenAndResumeAction(resp.data)
+			    }
+            }
 		} catch (groovyx.net.http.HttpResponseException e) {
 			log.error "refreshAuthToken() >> Error: e.statusCode ${e.statusCode}"
 			def reAttemptPeriod = 300 // in sec
@@ -662,118 +596,220 @@ private refreshAuthToken() {
 	}
 }
 
-def resumeProgram(child, deviceId) {
-
-
-	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"functions": [{"type": "resumeProgram"}]}'
-	def result = sendJson(jsonRequestBody)
-	return result
+/**
+ * Saves the refresh and auth token from the passed-in JSON object,
+ * and invokes any previously executing action that did not complete due to
+ * an expired token.
+ *
+ * @param json - an object representing the parsed JSON response from Ecobee
+ */
+private void saveTokenAndResumeAction(json) {
+    log.debug "token response json: $json"
+    if (json) {
+        debugEvent("Response = $json")
+        atomicState.refreshToken = json?.refresh_token
+        atomicState.authToken = json?.access_token
+        if (atomicState.action) {
+            log.debug "got refresh token, executing next action: ${atomicState.action}"
+            "${atomicState.action}"()
+        }
+    } else {
+        log.warn "did not get response body from refresh token response"
+    }
+    atomicState.action = ""
 }
 
-def setHold(child, heating, cooling, deviceId, sendHoldType) {
-
-	int h = heating * 10
-	int c = cooling * 10
-	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"functions": [{ "type": "setHold", "params": { "coolHoldTemp": '+c+',"heatHoldTemp": '+h+', "holdType": '+sendHoldType+' } } ]}'
-
-	def result = sendJson(child, jsonRequestBody)
-	return result
+/**
+ * Executes the resume program command on the Ecobee thermostat
+ * @param deviceId - the ID of the device
+ *
+ * @retrun true if the command was successful, false otherwise.
+ */
+boolean resumeProgram(deviceId) {
+    def payload = [
+        selection: [
+            selectionType: "thermostats",
+            selectionMatch: deviceId,
+            includeRuntime: true
+        ],
+        functions: [
+            [
+                type: "resumeProgram"
+            ]
+        ]
+    ]
+    return sendCommandToEcobee(payload)
 }
 
-def setFanMode(child, heating, cooling, deviceId, sendHoldType, fanMode) {
+/**
+ * Executes the set hold command on the Ecobee thermostat
+ * @param heating - The heating temperature to set in fahrenheit
+ * @param cooling - the cooling temperature to set in fahrenheit
+ * @param deviceId - the ID of the device
+ * @param sendHoldType - the hold type to execute
+ *
+ * @return true if the command was successful, false otherwise
+ */
+boolean setHold(heating, cooling, deviceId, sendHoldType) {
+    // Ecobee requires that temp values be in fahrenheit multiplied by 10.
+    int h = heating * 10
+    int c = cooling * 10
 
-	int h = heating * 10
-	int c = cooling * 10
+    def payload = [
+        selection: [
+            selectionType: "thermostats",
+            selectionMatch: deviceId,
+            includeRuntime: true
+        ],
+        functions: [
+            [
+                type: "setHold",
+                params: [
+                    coolHoldTemp: c,
+                    heatHoldTemp: h,
+                    holdType: sendHoldType
+                ]
+            ]
+        ]
+    ]
 
-
-	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"functions": [{ "type": "setHold", "params": { "coolHoldTemp": '+c+',"heatHoldTemp": '+h+', "holdType": '+sendHoldType+', "fan": '+fanMode+' } } ]}'
-	def result = sendJson(child, jsonRequestBody)
-	return result
+    return sendCommandToEcobee(payload)
 }
 
-def setMode(child, mode, deviceId) {
-	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"thermostat": {"settings":{"hvacMode":"'+"${mode}"+'"}}}'
+/**
+ * Executes the set fan mode command on the Ecobee thermostat
+ * @param heating - The heating temperature to set in fahrenheit
+ * @param cooling - the cooling temperature to set in fahrenheit
+ * @param deviceId - the ID of the device
+ * @param sendHoldType - the hold type to execute
+ * @param fanMode - the fan mode to set to
+ *
+ * @return true if the command was successful, false otherwise
+ */
+boolean setFanMode(heating, cooling, deviceId, sendHoldType, fanMode) {
+    // Ecobee requires that temp values be in fahrenheit multiplied by 10.
+    int h = heating * 10
+    int c = cooling * 10
 
-	def result = sendJson(jsonRequestBody)
-	return result
+    def payload = [
+        selection: [
+            selectionType: "thermostats",
+            selectionMatch: deviceId,
+            includeRuntime: true
+        ],
+        functions: [
+            [
+                type: "setHold",
+                params: [
+                    coolHoldTemp: c,
+                    heatHoldTemp: h,
+                    holdType: sendHoldType,
+                    fan: fanMode
+                ]
+            ]
+        ]
+    ]
+
+	return sendCommandToEcobee(payload)
 }
 
-def sendJson(child = null, String jsonBody) {
+/**
+ * Sets the mode of the Ecobee thermostat
+ * @param mode - the mode to set to
+ * @param deviceId - the ID of the device
+ *
+ * @return true if the command was successful, false otherwise
+ */
+boolean setMode(mode, deviceId) {
+    def payload = [
+        selection: [
+            selectionType: "thermostats",
+            selectionMatch: deviceId,
+            includeRuntime: true
+        ],
+        thermostat: [
+            settings: [
+                hvacMode: mode
+            ]
+        ]
+    ]
+	return sendCommandToEcobee(payload)
+}
 
-	def returnStatus = false
+/**
+ * Makes a request to the Ecobee API to actuate the thermostat.
+ * Used by command methods to send commands to Ecobee.
+ *
+ * @param bodyParams - a map of request parameters to send to Ecobee.
+ *
+ * @return true if the command was accepted by Ecobee without error, false otherwise.
+ */
+private boolean sendCommandToEcobee(Map bodyParams) {
+	def isSuccess = false
 	def cmdParams = [
-			uri: apiEndpoint,
-			path: "/1/thermostat",
-			headers: ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
-			body: jsonBody
+		uri: apiEndpoint,
+		path: "/1/thermostat",
+		headers: ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
+		body: toJson(bodyParams)
 	]
 
 	try{
-		httpPost(cmdParams) { resp ->
-
-			if(resp.status == 200) {
-
-				log.debug "updated ${resp.data}"
-				returnStatus = resp.data.status.code
-				if (resp.data.status.code == 0)
-					log.debug "Successful call to ecobee API."
-				else {
-					log.debug "Error return code = ${resp.data.status.code}"
-					debugEvent("Error return code = ${resp.data.status.code}")
-				}
-			}
-		}
+        httpPost(cmdParams) { resp ->
+            if(resp.status == 200) {
+                log.debug "updated ${resp.data}"
+                def returnStatus = resp.data.status.code
+                if (returnStatus == 0) {
+                    log.debug "Successful call to ecobee API."
+                    isSuccess = true
+                } else {
+                    log.debug "Error return code = ${returnStatus}"
+                    debugEvent("Error return code = ${returnStatus}")
+                }
+            }
+        }
 	} catch (groovyx.net.http.HttpResponseException e) {
         log.trace "Exception Sending Json: " + e.response.data.status
         debugEvent ("sent Json & got http status ${e.statusCode} - ${e.response.data.status.code}")
         if (e.response.data.status.code == 14) {
+            // TODO - figure out why we're setting the next action to be pollChildren
+            // after refreshing auth token. Is it to keep UI in sync, or just copy/paste error?
             atomicState.action = "pollChildren"
             log.debug "Refreshing your auth_token!"
             refreshAuthToken()
-        }
-        else {
+        } else {
             debugEvent("Authentication error, invalid authentication method, lack of credentials, etc.")
             log.error "Authentication error, invalid authentication method, lack of credentials, etc."
         }
     }
 
-	if (returnStatus == 0)
-		return true
-	else
-		return false
+    return isSuccess
 }
 
-def getChildName()           { "Ecobee Thermostat" }
-def getSensorChildName()     { "Ecobee Sensor" }
+def getChildName()           { return "Ecobee Thermostat" }
+def getSensorChildName()     { return "Ecobee Sensor" }
 def getServerUrl()           { return "https://graph.api.smartthings.com" }
 def getShardUrl()            { return getApiServerUrl() }
-def getCallbackUrl()        { "https://graph.api.smartthings.com/oauth/callback" }
-def getBuildRedirectUrl()   { "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${atomicState.accessToken}&apiServerUrl=${shardUrl}" }
-def getApiEndpoint()        { "https://api.ecobee.com" }
-def getSmartThingsClientId() { appSettings.clientId }
+def getCallbackUrl()         { return "https://graph.api.smartthings.com/oauth/callback" }
+def getBuildRedirectUrl()    { return "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${atomicState.accessToken}&apiServerUrl=${shardUrl}" }
+def getApiEndpoint()         { return "https://api.ecobee.com" }
+def getSmartThingsClientId() { return appSettings.clientId }
 
 def debugEvent(message, displayEvent = false) {
-
 	def results = [
-			name: "appdebug",
-			descriptionText: message,
-			displayed: displayEvent
+		name: "appdebug",
+		descriptionText: message,
+		displayed: displayEvent
 	]
 	log.debug "Generating AppDebug Event: ${results}"
 	sendEvent (results)
-
-}
-
-def debugEventFromParent(child, message) {
-	if (child != null) { child.sendEvent("name":"debugEventFromParent", "value":message, "description":message, displayed: true, isStateChange: true)}
 }
 
 //send both push notification and mobile activity feeds
-def sendPushAndFeeds(notificationMessage){
+def sendPushAndFeeds(notificationMessage) {
 	log.warn "sendPushAndFeeds >> notificationMessage: ${notificationMessage}"
 	log.warn "sendPushAndFeeds >> atomicState.timeSendPush: ${atomicState.timeSendPush}"
-	if (atomicState.timeSendPush){
-		if (now() - atomicState.timeSendPush > 86400000){ // notification is sent to remind user once a day
+	if (atomicState.timeSendPush) {
+		if (now() - atomicState.timeSendPush > 86400000) { // notification is sent to remind user once a day
 			sendPush("Your Ecobee thermostat " + notificationMessage)
 			sendActivityFeeds(notificationMessage)
 			atomicState.timeSendPush = now()
@@ -786,6 +822,58 @@ def sendPushAndFeeds(notificationMessage){
 	atomicState.authToken = null
 }
 
+/**
+ * Stores data about the thermostats in atomicState.
+ * @param thermostats - a list of thermostats as returned from the Ecobee API
+ */
+private void storeThermostatData(thermostats) {
+    log.trace "Storing thermostat data: $thermostats"
+    def data
+    atomicState.thermostats = thermostats.inject([:]) { collector, stat ->
+        def dni = [ app.id, stat.identifier ].join('.')
+        log.debug "updating dni $dni"
+
+        data = [
+            coolMode: (stat.settings.coolStages > 0),
+            heatMode: (stat.settings.heatStages > 0),
+            deviceTemperatureUnit: stat.settings.useCelsius,
+            minHeatingSetpoint: (stat.settings.heatRangeLow / 10),
+            maxHeatingSetpoint: (stat.settings.heatRangeHigh / 10),
+            minCoolingSetpoint: (stat.settings.coolRangeLow / 10),
+            maxCoolingSetpoint: (stat.settings.coolRangeHigh / 10),
+            autoMode: stat.settings.autoHeatCoolFeatureEnabled,
+            auxHeatMode: (stat.settings.hasHeatPump) && (stat.settings.hasForcedAir || stat.settings.hasElectric || stat.settings.hasBoiler),
+            temperature: (stat.runtime.actualTemperature / 10),
+            heatingSetpoint: stat.runtime.desiredHeat / 10,
+            coolingSetpoint: stat.runtime.desiredCool / 10,
+            thermostatMode: stat.settings.hvacMode,
+            humidity: stat.runtime.actualHumidity,
+            thermostatFanMode: stat.runtime.desiredFanMode
+        ]
+        if (location.temperatureScale == "F") {
+            data["temperature"] = data["temperature"] ? Math.round(data["temperature"].toDouble()) : data["temperature"]
+            data["heatingSetpoint"] = data["heatingSetpoint"] ? Math.round(data["heatingSetpoint"].toDouble()) : data["heatingSetpoint"]
+            data["coolingSetpoint"] = data["coolingSetpoint"] ? Math.round(data["coolingSetpoint"].toDouble()) : data["coolingSetpoint"]
+            data["minHeatingSetpoint"] = data["minHeatingSetpoint"] ? Math.round(data["minHeatingSetpoint"].toDouble()) : data["minHeatingSetpoint"]
+            data["maxHeatingSetpoint"] = data["maxHeatingSetpoint"] ? Math.round(data["maxHeatingSetpoint"].toDouble()) : data["maxHeatingSetpoint"]
+            data["minCoolingSetpoint"] = data["minCoolingSetpoint"] ? Math.round(data["minCoolingSetpoint"].toDouble()) : data["minCoolingSetpoint"]
+            data["maxCoolingSetpoint"] = data["maxCoolingSetpoint"] ? Math.round(data["maxCoolingSetpoint"].toDouble()) : data["maxCoolingSetpoint"]
+
+        }
+
+        if (data?.deviceTemperatureUnit == false && location.temperatureScale == "F") {
+            data["deviceTemperatureUnit"] = "F"
+
+        } else {
+            data["deviceTemperatureUnit"] = "C"
+        }
+
+        collector[dni] = [data:data]
+        return collector
+    }
+    log.debug "updated ${atomicState.thermostats?.size()} thermostats: ${atomicState.thermostats}"
+}
+
 def sendActivityFeeds(notificationMessage) {
 	def devices = getChildDevices()
 	devices.each { child ->
@@ -793,14 +881,6 @@ def sendActivityFeeds(notificationMessage) {
 	}
 }
 
-def roundC (tempC) {
-	return String.format("%.1f", (Math.round(tempC * 2))/2)
-}
-
 def convertFtoC (tempF) {
 	return String.format("%.1f", (Math.round(((tempF - 32)*(5/9)) * 2))/2)
 }
-
-def convertCtoF (tempC) {
-	return (Math.round(tempC * (9/5)) + 32).toInteger()
-}

smartapps/smartthings/energy-alerts.src/energy-alerts.groovy

@@ -64,10 +64,12 @@ def meterHandler(evt) {
     def lastValue = atomicState.lastValue as double
     atomicState.lastValue = meterValue
 
+    def dUnit = evt.unit ?: "Watts"
+
     def aboveThresholdValue = aboveThreshold as int
     if (meterValue > aboveThresholdValue) {
     	if (lastValue < aboveThresholdValue) { // only send notifications when crossing the threshold
-		    def msg = "${meter} reported ${evt.value} ${evt.unit} which is above your threshold of ${aboveThreshold}."
+		    def msg = "${meter} reported ${evt.value} ${dUnit} which is above your threshold of ${aboveThreshold}."
     	    sendMessage(msg)
         } else {
 //        	log.debug "not sending notification for ${evt.description} because the threshold (${aboveThreshold}) has already been crossed"
@@ -78,7 +80,7 @@ def meterHandler(evt) {
     def belowThresholdValue = belowThreshold as int
     if (meterValue < belowThresholdValue) {
     	if (lastValue > belowThresholdValue) { // only send notifications when crossing the threshold
-		    def msg = "${meter} reported ${evt.value} ${evt.unit} which is below your threshold of ${belowThreshold}."
+		    def msg = "${meter} reported ${evt.value} ${dUnit} which is below your threshold of ${belowThreshold}."
     	    sendMessage(msg)
         } else {
 //        	log.debug "not sending notification for ${evt.description} because the threshold (${belowThreshold}) has already been crossed"

smartapps/smartthings/flood-alert.src/flood-alert.groovy

@@ -54,10 +54,10 @@ def waterWetHandler(evt) {
 	def alreadySentSms = recentEvents.count { it.value && it.value == "wet" } > 1
 
 	if (alreadySentSms) {
-		log.debug "SMS already sent to $phone within the last $deltaSeconds seconds"
+		log.debug "SMS already sent within the last $deltaSeconds seconds"
 	} else {
 		def msg = "${alarm.displayName} is wet!"
-		log.debug "$alarm is wet, texting $phone"
+		log.debug "$alarm is wet, texting phone number"
 
 		if (location.contactBookEnabled) {
 			sendNotificationToContacts(msg, recipients)

smartapps/smartthings/garage-door-monitor.src/garage-door-monitor.groovy

@@ -90,7 +90,7 @@ def takeAction(){
 }
 
 def sendTextMessage() {
-	log.debug "$multisensor was open too long, texting $phone"
+	log.debug "$multisensor was open too long, texting phone"
 
 	updateSmsHistory()
 	def openMinutes = maxOpenTime * (state.smsHistory?.size() ?: 1)

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -454,17 +454,23 @@ def sendStopEvent(source) {
 		eventData.value += "cancelled"
 	}
 
+	// send 100% completion event
+	sendTimeRemainingEvent(100)
+
+	// send a non-displayed 0% completion to reset tiles
+	sendTimeRemainingEvent(0, false)
+
+	// send sessionStatus event last so the event feed is ordered properly
 	sendControllerEvent(eventData)
-	sendTimeRemainingEvent(0)
 }
 
-def sendTimeRemainingEvent(percentComplete) {
+def sendTimeRemainingEvent(percentComplete, displayed = true) {
 	log.trace "sendTimeRemainingEvent(${percentComplete})"
 
 	def percentCompleteEventData = [
 			name: "percentComplete",
 			value: percentComplete as int,
-			displayed: true,
+			displayed: displayed,
 			isStateChange: true
 	]
 	sendControllerEvent(percentCompleteEventData)
@@ -474,7 +480,7 @@ def sendTimeRemainingEvent(percentComplete) {
 	def timeRemainingEventData = [
 			name: "timeRemaining",
 			value: displayableTime(timeRemaining),
-			displayed: true,
+			displayed: displayed,
 			isStateChange: true
 	]
 	sendControllerEvent(timeRemainingEventData)
@@ -608,8 +614,6 @@ private completion() {
 	handleCompletionMessaging()
 
 	handleCompletionModesAndPhrases()
-
-	sendTimeRemainingEvent(100)
 }
 
 private handleCompletionSwitches() {
@@ -761,7 +765,7 @@ String displayableTime(timeRemaining) {
 		return "${minutes}:00"
 	}
 	def fraction = "0.${parts[1]}" as double
-	def seconds = "${60 * fraction as int}".padRight(2, "0")
+	def seconds = "${60 * fraction as int}".padLeft(2, "0")
 	return "${minutes}:${seconds}"
 }
 
@@ -1101,4 +1105,4 @@ def hasStartLevel() {
 
 def hasEndLevel() {
 	return (endLevel != null && endLevel != "")
-}
+}

smartapps/smartthings/greetings-earthling.src/greetings-earthling.groovy

@@ -47,13 +47,13 @@ preferences {
 
 def installed() {
 	log.debug "Installed with settings: ${settings}"
-	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+	// log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	subscribe(people, "presence", presence)
 }
 
 def updated() {
 	log.debug "Updated with settings: ${settings}"
-	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+	// log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	unsubscribe()
 	subscribe(people, "presence", presence)
 }
@@ -71,11 +71,10 @@ def presence(evt)
 			def person = getPerson(evt)
 			def recentNotPresent = person.statesSince("presence", t0).find{it.value == "not present"}
 			if (recentNotPresent) {
-				log.debug "skipping notification of arrival of ${person.displayName} because last departure was only ${now() - recentNotPresent.date.time} msec ago"
+				log.debug "skipping notification of arrival of Person because last departure was only ${now() - recentNotPresent.date.time} msec ago"
 			}
 			else {
 				def message = "${person.displayName} arrived at home, changing mode to '${newMode}'"
-				log.info message
 				send(message)
 				setLocationMode(newMode)
 			}
@@ -106,6 +105,4 @@ private send(msg) {
             sendSms(phone, msg)
         }
     }
-
-	log.debug msg
 }

smartapps/smartthings/habit-helper.src/habit-helper.groovy

@@ -57,12 +57,11 @@ def scheduleCheck()
 	def message = message1 ?: "SmartThings - Habit Helper Reminder!"
 
     if (location.contactBookEnabled) {
-        log.debug "Texting reminder: ($message) to contacts:${recipients?.size()}"
+        log.debug "Texting reminder to contacts:${recipients?.size()}"
         sendNotificationToContacts(message, recipients)
     }
     else {
-
-        log.debug "Texting reminder: ($message) to $phone1"
+        log.debug "Texting reminder"
         sendSms(phone1, message)
     }
 }

smartapps/smartthings/has-barkley-been-fed.src/has-barkley-been-fed.groovy

@@ -68,7 +68,7 @@ def scheduleCheck()
             sendNotificationToContacts("No one has fed the dog", recipients)
         }
         else {
-            log.debug "Feeder was not opened since $midnight, texting $phone1"
+            log.debug "Feeder was not opened since $midnight, texting one phone number"
             sendSms(phone1, "No one has fed the dog")
         }
 	}

smartapps/smartthings/it-moved.src/it-moved.groovy

@@ -53,14 +53,14 @@ def accelerationActiveHandler(evt) {
 	def alreadySentSms = recentEvents.count { it.value && it.value == "active" } > 1
 
 	if (alreadySentSms) {
-		log.debug "SMS already sent to $phone1 within the last $deltaSeconds seconds"
+		log.debug "SMS already sent within the last $deltaSeconds seconds"
 	} else {
         if (location.contactBookEnabled) {
-            log.debug "$accelerationSensor has moved, texting contacts: ${recipients?.size()}"
+            log.debug "accelerationSensor has moved, texting contacts: ${recipients?.size()}"
             sendNotificationToContacts("${accelerationSensor.label ?: accelerationSensor.name} moved", recipients)
         }
         else {
-            log.debug "$accelerationSensor has moved, texting $phone1"
+            log.debug "accelerationSensor has moved, sending text message"
             sendSms(phone1, "${accelerationSensor.label ?: accelerationSensor.name} moved")
         }
 	}

smartapps/smartthings/its-too-cold.src/its-too-cold.groovy

@@ -69,10 +69,10 @@ def temperatureHandler(evt) {
 		def alreadySentSms = recentEvents.count { it.doubleValue <= tooCold } > 1
 
 		if (alreadySentSms) {
-			log.debug "SMS already sent to $phone1 within the last $deltaMinutes minutes"
+			log.debug "SMS already sent within the last $deltaMinutes minutes"
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
-			log.debug "Temperature dropped below $tooCold:  sending SMS to $phone1 and activating $mySwitch"
+			log.debug "Temperature dropped below $tooCold:  sending SMS and activating $mySwitch"
 			def tempScale = location.temperatureScale ?: "F"
 			send("${temperatureSensor1.displayName} is too cold, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
 			switch1?.on()

smartapps/smartthings/its-too-hot.src/its-too-hot.groovy

@@ -69,10 +69,10 @@ def temperatureHandler(evt) {
 		def alreadySentSms = recentEvents.count { it.doubleValue >= tooHot } > 1
 
 		if (alreadySentSms) {
-			log.debug "SMS already sent to $phone1 within the last $deltaMinutes minutes"
+			log.debug "SMS already sent within the last $deltaMinutes minutes"
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
-			log.debug "Temperature rose above $tooHot:  sending SMS to $phone1 and activating $mySwitch"
+			log.debug "Temperature rose above $tooHot:  sending SMS and activating $mySwitch"
 			def tempScale = location.temperatureScale ?: "F"
 			send("${temperatureSensor1.displayName} is too hot, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
 			switch1?.on()

smartapps/smartthings/life360-connect.src/life360-connect.groovy

@@ -74,8 +74,6 @@ def authPage()
 
 		def redirectUrl = oauthInitUrl()
     
-  	  	log.debug "RedirectURL = ${redirectUrl}"
-
 		return dynamicPage(name: "Credentials", title: "Life360", nextPage:"listCirclesPage", uninstall: uninstallOption, install:false) {
 		    section {
     			href url:redirectUrl, style:"embedded", required:false, title:"Life360", description:description
@@ -257,8 +255,6 @@ def initializeLife360Connection() {
 	def oauthClientId = appSettings.clientId
 	def oauthClientSecret = appSettings.clientSecret
 
-	log.debug "Installed with settings: ${settings}"
-
 	initialize()
     
     def username = settings.username
@@ -269,8 +265,6 @@ def initializeLife360Connection() {
   	def basicCredentials = "${oauthClientId}:${oauthClientSecret}"
     def encodedCredentials = basicCredentials.encodeAsBase64().toString()
     
-    log.debug "Encoded Creds: ${encodedCredentials}"
-
     
     // call life360, get OAUTH token using password flow, save
     // curl -X POST -H "Authorization: Basic cFJFcXVnYWJSZXRyZTRFc3RldGhlcnVmcmVQdW1hbUV4dWNyRUh1YzptM2ZydXBSZXRSZXN3ZXJFQ2hBUHJFOTZxYWtFZHI0Vg==" 
@@ -284,8 +278,6 @@ def initializeLife360Connection() {
     				"username=${username}&"+
                     "password=${password}"
 
-    log.debug "Post Body: ${postBody}"
-	   
     def result = null
     
     try {
@@ -295,7 +287,6 @@ def initializeLife360Connection() {
 		}
         if (result.data.access_token) {
        		state.life360AccessToken = result.data.access_token
-       		log.debug "Access Token = ${state.life360AccessToken}"
             return true;
    		}
 		log.debug "Response=${result.data}"
@@ -533,8 +524,6 @@ def createCircleSubscription() {
         
     def postBody =  "url=${hookUrl}"
 
-    log.debug "Post Body: ${postBody}"
-	   
     def result = null
     
     try {
@@ -586,8 +575,6 @@ def updated() {
         
         	// log.debug "After Find Attempt."
 
-       		log.debug "Member Id = ${member.id}, Name = ${member.firstName} ${member.lastName}, Email Address = ${member.loginEmail}"
-        
         	// log.debug "External Id=${app.id}:${member.id}"
        
        		// create the device

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -50,9 +50,9 @@ def authPage() {
 		}
 		def description = "Tap to enter LIFX credentials"
 		def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${apiServerUrl}" // this triggers oauthInit() below
-//        def redirectUrl = "${apiServerUrl}"
-        log.debug "app id: ${app.id}"
-		log.debug "redirect url: ${redirectUrl}"
+		// def redirectUrl = "${apiServerUrl}"
+		// log.debug "app id: ${app.id}"
+		// log.debug "redirect url: ${redirectUrl}"s
 		return dynamicPage(name: "Credentials", title: "Connect to LIFX", nextPage: null, uninstall: true, install:true) {
 			section {
 				href(url:redirectUrl, required:true, title:"Connect to LIFX", description:"Tap here to connect your LIFX account")
@@ -372,7 +372,7 @@ def updateDevices() {
 		def childDevice = getChildDevice(device.id)
 		selectors.add("${device.id}")
 		if (!childDevice) {
-			log.info("Adding device ${device.id}: ${device.product}")
+			// log.info("Adding device ${device.id}: ${device.product}")
 			def data = [
 					label: device.label,
 					level: Math.round((device.brightness ?: 1) * 100),

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -34,6 +34,7 @@
  *  locks                | lock              | lock, unlock                | locked, unlocked
  *  ---------------------+-------------------+-----------------------------+------------------------------------
  */
+include 'asynchttp_v1'
 
 definition(
     name: "Logitech Harmony (Connect)",
@@ -51,7 +52,7 @@ definition(
 }
 
 preferences(oauthPage: "deviceAuthorization") {
-    page(name: "Credentials", title: "Connect to your Logitech Harmony device", content: "authPage", install: false, nextPage: "deviceAuthorization")
+  page(name: "Credentials", title: "Connect to your Logitech Harmony device", content: "authPage", install: false, nextPage: "deviceAuthorization")
 	page(name: "deviceAuthorization", title: "Logitech Harmony device authorization", install: true) {
 		section("Allow Logitech Harmony to control these things...") {
 			input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
@@ -102,32 +103,35 @@ def authPage() {
         description = "Click to enter Harmony Credentials"
         def redirectUrl = buildRedirectUrl
         return dynamicPage(name: "Credentials", title: "Harmony", nextPage: null, uninstall: true, install:false) {
-               section { href url:redirectUrl, style:"embedded", required:true, title:"Harmony", description:description }
+            section { paragraph title: "Note:", "This device has not been officially tested and certified to “Work with SmartThings”. You can connect it to your SmartThings home but performance may vary and we will not be able to provide support or assistance." }
+            section { href url:redirectUrl, style:"embedded", required:true, title:"Harmony", description:description }
         }
     } else {
 		//device discovery request every 5 //25 seconds
 		int deviceRefreshCount = !state.deviceRefreshCount ? 0 : state.deviceRefreshCount as int
 		state.deviceRefreshCount = deviceRefreshCount + 1
-		def refreshInterval = 3
+		def refreshInterval = 5
 
 		def huboptions = state.HarmonyHubs ?: []
 		def actoptions = state.HarmonyActivities ?: []
 
 		def numFoundHub = huboptions.size() ?: 0
-        def numFoundAct = actoptions.size() ?: 0
+    def numFoundAct = actoptions.size() ?: 0
+
 		if((deviceRefreshCount % 5) == 0) {
 			discoverDevices()
 		}
+
 		return dynamicPage(name:"Credentials", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 			section("Please wait while we discover your Harmony Hubs and Activities. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-				input "selectedhubs", "enum", required:false, title:"Select Harmony Hubs (${numFoundHub} found)", multiple:true, options:huboptions
+				input "selectedhubs", "enum", required:false, title:"Select Harmony Hubs (${numFoundHub} found)", multiple:true, submitOnChange: true, options:huboptions
 			}
-            // Virtual activity flag
-            if (numFoundHub > 0 && numFoundAct > 0 && true)
+      // Virtual activity flag
+      if (numFoundHub > 0 && numFoundAct > 0 && true)
 			section("You can also add activities as virtual switches for other convenient integrations") {
-				input "selectedactivities", "enum", required:false, title:"Select Harmony Activities (${numFoundAct} found)", multiple:true, options:actoptions
+				input "selectedactivities", "enum", required:false, title:"Select Harmony Activities (${numFoundAct} found)", multiple:true, submitOnChange: true, options:actoptions
 			}
-            if (state.resethub)
+    if (state.resethub)
 			section("Connection to the hub timed out. Please restart the hub and try again.") {}
 		}
     }
@@ -314,8 +318,6 @@ def installed() {
 }
 
 def updated() {
-	unsubscribe()
-  unschedule()
 	if (!state.accessToken) {
 		log.debug "About to create access token"
 		createAccessToken()
@@ -381,8 +383,6 @@ def discovery() {
             	log.debug "valid Token"
                 state.Harmonydevices = response.data
                 state.resethub = false
-                getActivityList()
-                poll()
 	        } else {
             	log.debug "Error: $response.status"
             }
@@ -431,142 +431,182 @@ def addDevice() {
 }
 
 def activity(dni,mode) {
-    def Params = [auth: state.HarmonyAccessToken]
-    def msg = "Command failed"
-    def url = ''
+    def tokenParam = [auth: state.HarmonyAccessToken]
+    def url
     if (dni == "all") {
-        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(Params)}"
+        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(tokenParam)}"
     } else {
         def aux = dni.split('-')
         def hubId = aux[1]
         if (mode == "hub" || (aux.size() <= 2) || (aux[2] == "off")){
-        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(Params)}"
+        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(tokenParam)}"
         } else {
-            def activityId = aux[2]
-        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/${activityId}/${mode}?${toQueryString(Params)}"
+          def activityId = aux[2]
+        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/${activityId}/${mode}?${toQueryString(tokenParam)}"
         }
 	}
-	try {
-    	httpPostJson(uri: url) { response ->
-        	if (response.data.code == 200 || dni == "all") {
-            	msg = "Command sent succesfully"
-            	state.aux = 0
-            } else {
-            	msg = "Command failed. Error: $response.data.code"
-            }
-		}
-    } catch (groovyx.net.http.HttpResponseException ex) {
-        log.error ex
-        if (state.aux == 0) {
-        	state.aux = 1
-        	activity(dni,mode)
-        } else {
-        	msg = ex
-            state.aux = 0
-        }
-    } catch(Exception ex) {
-    	msg = ex
+  def params = [
+      uri: url,
+      contentType: 'application/json'
+  ]
+  asynchttp_v1.post('activityResponse', params)
+  return "Command Sent"
+}
+
+def activityResponse(response, data) {
+  if (response.hasError()) {
+    log.error "Logitech Harmony - response has error: $response.errorMessage"
+    if (response.status == 401) { // token is expired
+      state.remove("HarmonyAccessToken")
+      log.warn "Logitech Harmony - Access token has expired"
     }
-    runIn(10, "poll", [overwrite: true])
-    return msg
+  } else {
+    def ResponseValues
+    try {
+      // json response already parsed into JSONElement object
+      ResponseValues = response.json
+    } catch (e) {
+      log.error "Logitech Harmony - error parsing json from response: $e"
+    }
+    if (ResponseValues) {
+      if (ResponseValues.code == 200) {
+        log.trace "Command sent succesfully"
+        poll()
+      } else {
+        log.trace "Command failed. Error: $response.data.code"
+      }
+    } else {
+      log.debug "Logitech Harmony - did not get json results from response body: $response.data"
+    }
+  }
 }
 
 def poll() {
 	// GET THE LIST OF ACTIVITIES
     if (state.HarmonyAccessToken) {
     	  getActivityList()
-        def Params = [auth: state.HarmonyAccessToken]
-        def url = "https://home.myharmony.com/cloudapi/state?${toQueryString(Params)}"
-        try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
-                def map = [:]
-                response.data.hubs.each {
-		            if (it.value.message == "OK") {
-	                    map["${it.key}"] = "${it.value.response.data.currentAvActivity},${it.value.response.data.activityStatus}"
-	                    def hub = getChildDevice("harmony-${it.key}")
-	                    if (hub) {
-	                        if (it.value.response.data.currentAvActivity == "-1") {
-	                            hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
-	                        } else {
-	                            def currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
-	                            hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
-	                        }
-	                    }
-	                } else {
-		                log.trace it.value.message
-	                }
-                }
-                def activities = getChildDevices()
-                def activitynotrunning = true
-                activities.each { activity ->
-                    def act = activity.deviceNetworkId.split('-')
-                    if (act.size() > 2) {
-                        def aux = map.find { it.key == act[1] }
-                        if (aux) {
-                            def aux2 = aux.value.split(',')
-                            def childDevice = getChildDevice(activity.deviceNetworkId)
-                            if ((act[2] == aux2[0]) && (aux2[1] == "1" || aux2[1] == "2")) {
-                                childDevice?.sendEvent(name: "switch", value: "on")
-                                if (aux2[1] == "1")
-                                    runIn(5, "poll", [overwrite: true])
-                            } else {
-                                childDevice?.sendEvent(name: "switch", value: "off")
-                                if (aux2[1] == "3")
-                                    runIn(5, "poll", [overwrite: true])
-                            }
-                        }
+        def tokenParam = [auth: state.HarmonyAccessToken]
+        def params = [
+            uri: "https://home.myharmony.com/cloudapi/state?${toQueryString(tokenParam)}",
+            headers: ["Accept": "application/json"],
+            contentType: 'application/json'
+        ]
+        asynchttp_v1.get('pollResponse', params)
+      } else {
+          log.warn "Logitech Harmony - Access token has expired"
+      }
+}
+
+def pollResponse(response, data) {
+	if (response.hasError()) {
+    log.error "Logitech Harmony - response has error: $response.errorMessage"
+    if (response.status == 401) { // token is expired
+      state.remove("HarmonyAccessToken")
+      log.warn "Logitech Harmony - Access token has expired"
+    }
+	} else {
+			def ResponseValues
+			try {
+					// json response already parsed into JSONElement object
+					ResponseValues = response.json
+			} catch (e) {
+					log.error "Logitech Harmony - error parsing json from response: $e"
+			}
+			if (ResponseValues) {
+        def map = [:]
+        ResponseValues.hubs.each {
+        if (it.value.message == "OK") {
+              map["${it.key}"] = "${it.value.response.data.currentAvActivity},${it.value.response.data.activityStatus}"
+              def hub = getChildDevice("harmony-${it.key}")
+              if (hub) {
+                  if (it.value.response.data.currentAvActivity == "-1") {
+                      hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
+                  } else {
+                      def currentActivity = getChildDevice("harmony-${it.key}-${it.value.response.data.currentAvActivity}").device.displayName
+                      hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
+                  }
+              }
+          } else {
+            log.trace "Logitech Harmony - error response: $it.value.message"
+          }
+        }
+        def activities = getChildDevices()
+        def activitynotrunning = true
+        activities.each { activity ->
+            def act = activity.deviceNetworkId.split('-')
+            if (act.size() > 2) {
+                def aux = map.find { it.key == act[1] }
+                if (aux) {
+                    def aux2 = aux.value.split(',')
+                    def childDevice = getChildDevice(activity.deviceNetworkId)
+                    if ((act[2] == aux2[0]) && (aux2[1] == "1" || aux2[1] == "2")) {
+                        childDevice?.sendEvent(name: "switch", value: "on")
+                        if (aux2[1] == "1")
+                            runIn(5, "poll", [overwrite: true])
+                    } else {
+                        childDevice?.sendEvent(name: "switch", value: "off")
+                        if (aux2[1] == "3")
+                            runIn(5, "poll", [overwrite: true])
                     }
                 }
-                return "Poll completed $map - $state.hubs"
             }
-        } catch (groovyx.net.http.HttpResponseException e) {
-              if (e.statusCode == 401) { // token is expired
-                  state.remove("HarmonyAccessToken")
-                  log.warn "Harmony Access token has expired"
-              }
-        } catch (java.net.SocketTimeoutException e) {
-        	log.warn "Connection to the hub timed out. Please restart the hub and try again."
-              state.resethub = true
-        } catch (e) {
-        	log.info "Logitech Harmony - Error: $e"
         }
+			} else {
+					log.debug "Logitech Harmony - did not get json results from response body: $response.data"
+			}
+	}
+}
+
+def getActivityList() {
+    if (state.HarmonyAccessToken) {
+      def tokenParam = [auth: state.HarmonyAccessToken]
+      def params = [
+  				uri: "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(tokenParam)}",
+  				headers: ["Accept": "application/json"],
+  				contentType: 'application/json'
+  		]
+  		asynchttp_v1.get('activityListResponse', params)
+    } else {
+        log.warn "Logitech Harmony - Access token has expired"
     }
 }
 
-
-def getActivityList() {
-	// GET ACTIVITY'S NAME
-    if (state.HarmonyAccessToken) {
-        def Params = [auth: state.HarmonyAccessToken]
-        def url = "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(Params)}"
-        try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
-                response.data.hubs.each {
-                    def hub = getChildDevice("harmony-${it.key}")
-                    if (hub) {
-                    	def hubname = getHubName("${it.key}")
-                        def activities = []
-                        def aux = it.value.response.data.activities.size()
-                        if (aux >= 1) {
-                            activities = it.value.response.data.activities.collect {
-                                [id: it.key, name: it.value['name'], type: it.value['type']]
-                            }
-                            activities += [id: "off", name: "Activity OFF", type: "0"]
-                            log.trace activities
-                        }
-                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
-					}
-                }
-            }
-        } catch (groovyx.net.http.HttpResponseException e) {
-        	log.trace e
-        } catch (java.net.SocketTimeoutException e) {
-        	log.trace e
-		} catch(Exception e) {
-        	log.trace e
-		}
-    }
-	return activity
+def activityListResponse(response, data) {
+	if (response.hasError()) {
+			log.error "Logitech Harmony - response has error: $response.errorMessage"
+      if (response.status == 401) { // token is expired
+          state.remove("HarmonyAccessToken")
+          log.warn "Logitech Harmony - Access token has expired"
+      }
+	} else {
+			def ResponseValues
+			try {
+					// json response already parsed into JSONElement object
+					ResponseValues = response.json
+			} catch (e) {
+					log.error "Logitech Harmony - error parsing json from response: $e"
+			}
+			if (ResponseValues) {
+          	  ResponseValues.hubs.each {
+              def hub = getChildDevice("harmony-${it.key}")
+              if (hub) {
+                def hubname = getHubName("${it.key}")
+                  def activities = []
+                  def aux = it.value.response?.data.activities.size()
+                  if (aux >= 1) {
+                      activities = it.value.response.data.activities.collect {
+                          [id: it.key, name: it.value['name'], type: it.value['type']]
+                      }
+                      activities += [id: "off", name: "Activity OFF", type: "0"]
+                      log.trace activities
+                  }
+                  hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
+              }
+          }
+			} else {
+					log.debug "Logitech Harmony - did not get json results from response body: $response.data"
+			}
+	}
 }
 
 def getActivityName(activity,hubId) {
@@ -747,7 +787,7 @@ def addSubscription() {
 	def attribute = data.attributeName
 	def callbackUrl = data.callbackUrl
 
-	log.debug "addSubscription, params: ${params}, request: ${data}"
+	log.debug "Logitech Harmony - addSubscription, params: ${params}, request: ${data}"
 	if (!attribute) {
 		render status: 400, data: '{"msg": "attributeName is required"}'
 	} else {
@@ -809,6 +849,7 @@ def deviceHandler(evt) {
 	def deviceInfo = state[evt.deviceId]
 	if (state.harmonyHubs) {
 		state.harmonyHubs.each { harmonyHub ->
+      log.trace "Logitech Harmony - Sending data to $harmonyHub.name"
 			sendToHarmony(evt, harmonyHub.callbackUrl)
 		}
 	} else if (deviceInfo) {

smartapps/smartthings/notify-me-when.src/notify-me-when.groovy

@@ -48,9 +48,9 @@ preferences {
 	}
 	section("Via a push notification and/or an SMS message"){
 		input("recipients", "contact", title: "Send notifications to") {
-			input "phone", "phone", title: "Phone Number (for SMS, optional)", required: false
+			input "phone", "phone", title: "Enter a phone number to get SMS", required: false
 			paragraph "If outside the US please make sure to enter the proper country code"
-			input "pushAndPhone", "enum", title: "Both Push and SMS?", required: false, options: ["Yes", "No"]
+			input "pushAndPhone", "enum", title: "Notify me via Push Notification", required: false, options: ["Yes", "No"]
 		}
 	}
 	section("Minimum time between messages (optional, defaults to every message)") {
@@ -111,19 +111,24 @@ private sendMessage(evt) {
 	if (location.contactBookEnabled) {
 		sendNotificationToContacts(msg, recipients, options)
 	} else {
-		if (!phone || pushAndPhone != 'No') {
-			log.debug 'sending push'
-			options.method = 'push'
-			//sendPush(msg)
-		}
 		if (phone) {
 			options.phone = phone
-			log.debug 'sending SMS'
-			//sendSms(phone, msg)
+			if (pushAndPhone != 'No') {
+				log.debug 'Sending push and SMS'
+				options.method = 'both'
+			} else {
+				log.debug 'Sending SMS'
+				options.method = 'phone'
+			}
+		} else if (pushAndPhone != 'No') {
+			log.debug 'Sending push'
+			options.method = 'push'
+		} else {
+			log.debug 'Sending nothing'
+			options.method = 'none'
 		}
 		sendNotification(msg, options)
 	}
-
 	if (frequency) {
 		state[evt.deviceId] = now()
 	}

smartapps/smartthings/presence-change-push.src/presence-change-push.groovy

@@ -41,10 +41,10 @@ def updated() {
 
 def presenceHandler(evt) {
 	if (evt.value == "present") {
-		log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
+		// log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
     	sendPush("${presence.label ?: presence.name} has arrived at the ${location}")
 	} else if (evt.value == "not present") {
-		log.debug "${presence.label ?: presence.name} has left the ${location}"
+		// log.debug "${presence.label ?: presence.name} has left the ${location}"
     	sendPush("${presence.label ?: presence.name} has left the ${location}")
 	}
 }

smartapps/smartthings/presence-change-text.src/presence-change-text.groovy

@@ -47,7 +47,7 @@ def updated() {
 
 def presenceHandler(evt) {
 	if (evt.value == "present") {
-		log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
+		// log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
 
         if (location.contactBookEnabled) {
             sendNotificationToContacts("${presence.label ?: presence.name} has arrived at the ${location}", recipients)
@@ -56,7 +56,7 @@ def presenceHandler(evt) {
             sendSms(phone1, "${presence.label ?: presence.name} has arrived at the ${location}")
         }
 	} else if (evt.value == "not present") {
-		log.debug "${presence.label ?: presence.name} has left the ${location}"
+		// log.debug "${presence.label ?: presence.name} has left the ${location}"
 
         if (location.contactBookEnabled) {
             sendNotificationToContacts("${presence.label ?: presence.name} has left the ${location}", recipients)

smartapps/smartthings/ridiculously-automated-garage-door.src/ridiculously-automated-garage-door.groovy

@@ -67,7 +67,7 @@ def updated() {
 }
 
 def subscribe() {
-	log.debug "present: ${cars.collect{it.displayName + ': ' + it.currentPresence}}"
+	// log.debug "present: ${cars.collect{it.displayName + ': ' + it.currentPresence}}"
 	subscribe(doorSensor, "contact", garageDoorContact)
 
 	subscribe(cars, "presence", carPresence)

smartapps/smartthings/severe-weather-alert.src/severe-weather-alert.groovy

@@ -26,17 +26,22 @@ definition(
 )
 
 preferences {
-	section ("In addition to push notifications, send text alerts to...") {
-        input("recipients", "contact", title: "Send notifications to") {
-            input "phone1", "phone", title: "Phone Number 1", required: false
-            input "phone2", "phone", title: "Phone Number 2", required: false
-            input "phone3", "phone", title: "Phone Number 3", required: false
-        }
+
+  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
+		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
 	}
 
-	section ("Zip code (optional, defaults to location coordinates)...") {
-		input "zipcode", "text", title: "Zip Code", required: false
-	}
+  if (location.channelName != 'samsungtv') {
+		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
+  }
+
+	section ("In addition to push notifications, send text alerts to...") {
+      input("recipients", "contact", title: "Send notifications to") {
+          input "phone1", "phone", title: "Phone Number 1", required: false
+          input "phone2", "phone", title: "Phone Number 2", required: false
+          input "phone3", "phone", title: "Phone Number 3", required: false
+      }
+	 }
 }
 
 def installed() {
@@ -61,7 +66,7 @@ def checkForSevereWeather() {
 	def alerts
 	if(locationIsDefined()) {
 		if(zipcodeIsValid()) {
-			alerts = getWeatherFeature("alerts", zipcode)?.alerts
+			alerts = getWeatherFeature("alerts", zipCode)?.alerts
 		} else {
 			log.warn "Severe Weather Alert: Invalid zipcode entered, defaulting to location's zipcode"
 			alerts = getWeatherFeature("alerts")?.alerts

smartapps/smartthings/smart-security.src/smart-security.groovy

@@ -71,7 +71,7 @@ def updated() {
 private subscribeToEvents()
 {
 	subscribe intrusionMotions, "motion", intruderMotion
-	subscribe residentMotions, "motion", residentMotion
+	// subscribe residentMotions, "motion", residentMotion
 	subscribe intrusionContacts, "contact", contact
 	subscribe alarms, "alarm", alarm
 	subscribe(app, appTouch)
@@ -156,6 +156,7 @@ def residentMotion(evt)
 	//    	startReArmSequence()
 	//    }
 	//}
+  unsubscribe(residentMotions)
 }
 
 def contact(evt)
@@ -214,7 +215,7 @@ def checkForReArm()
 	}
 	else {
 		log.warn "checkForReArm: lastIntruderMotion was null, unable to check for re-arming intrusion detection"
-	}	
+	}
 }
 
 private startAlarmSequence()

smartapps/smartthings/text-me-when-it-opens.src/text-me-when-it-opens.groovy

@@ -48,7 +48,7 @@ def updated()
 
 def contactOpenHandler(evt) {
 	log.trace "$evt.value: $evt, $settings"
-	log.debug "$contact1 was opened, texting $phone1"
+  log.debug "$contact1 was opened, sending text"
     if (location.contactBookEnabled) {
         sendNotificationToContacts("Your ${contact1.label ?: contact1.name} was opened", recipients)
     }

smartapps/smartthings/text-me-when-theres-motion-and-im-not-here.src/text-me-when-theres-motion-and-im-not-here.groovy

@@ -50,7 +50,7 @@ def updated() {
 
 def motionActiveHandler(evt) {
 	log.trace "$evt.value: $evt, $settings"
-	
+
 	if (presence1.latestValue("presence") == "not present") {
 		// Don't send a continuous stream of text messages
 		def deltaSeconds = 10
@@ -60,14 +60,14 @@ def motionActiveHandler(evt) {
 		def alreadySentSms = recentEvents.count { it.value && it.value == "active" } > 1
 
 		if (alreadySentSms) {
-			log.debug "SMS already sent to $phone1 within the last $deltaSeconds seconds"
+			log.debug "SMS already sent within the last $deltaSeconds seconds"
 		} else {
             if (location.contactBookEnabled) {
                 log.debug "$motion1 has moved while you were out, sending notifications to: ${recipients?.size()}"
                 sendNotificationToContacts("${motion1.label} ${motion1.name} moved while you were out", recipients)
             }
             else {
-                log.debug "$motion1 has moved while you were out, texting $phone1"
+                log.debug "$motion1 has moved while you were out, sending text"
                 sendSms(phone1, "${motion1.label} ${motion1.name} moved while you were out")
             }
 		}