MSA-1184: A device handler for Aeotec Model zw095-a Home Energy Monitor. I have been using it for several weeks and have enhanced and refined it to the point where it is ready for general use by others. This device handler has been posted on the support site of the manufacturer.

https://aeotec.freshdesk.com/support/solutions/articles/6000122372-using-hem-gen5-with-smartthings-hub-s-custom-device-type

Thanks,
-Dillon

build.gradle

@@ -1,13 +1,15 @@
 import java.nio.charset.StandardCharsets
 import java.nio.file.Paths
+import com.smartthings.deployment.slack.FileUpload
+import com.smartthings.deployment.slack.Message
 
 apply plugin: 'groovy'
 apply plugin: 'smartthings-executable-deployment'
-apply plugin: 'smartthings-hipchat'
+apply plugin: 'smartthings-slack'
 
 buildscript {
     dependencies {
-        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.6"
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.7"
     }
     repositories {
         mavenLocal()
@@ -30,7 +32,43 @@ repositories {
 dependencies {
 }
 
-hipchatShareFile {
+slackSendMessage {
+    String branch = project.hasProperty('branch') ? project.property('branch') : 'unknown'
+    String token = project.hasProperty('slackToken') ? project.property('slackToken') : null
+    String webhookUrl = project.hasProperty('slackWebhookUrl') ? project.property('slackWebhookUrl') : null
+    String channel = project.hasProperty('slackChannel') ? project.property('slackChannel') : null
+    String drinks = 'https://dl.dropboxusercontent.com/s/m1z5mpd3c83lwev/minion_beer.jpeg?dl=0'
+    String wolverine = 'https://dl.dropboxusercontent.com/s/4lbjqzvm2v033u9/minion_wolverine.jpg?dl=0'
+    String beach = 'https://dl.dropboxusercontent.com/s/rqrfgxk53gfng69/minion_beach.png?dl=0'
+    String iconUrl
+    String color
+    String messageText
+    String username
+    switch (branch) {
+        case 'master':
+            username = 'Hickory'
+            iconUrl = wolverine
+            color = '#35D0F2'
+            messageText = 'Began deployment of _SmartThingsPublic[master]_ branch to the _Dev_ environments.'
+            break
+        case 'staging':
+            username = 'Dickory'
+            iconUrl = beach
+            color = '#FFDE20'
+            messageText = 'Began deployment of _SmartThingsPublic[staging]_ branch to the _Staging_ environments.'
+            break
+        case 'production':
+            username = 'Dock'
+            iconUrl = drinks
+            color = '#FF1D23'
+            messageText = 'Began deployment of _SmartThingsPublic[production]_ branch to the _Prod_ environments.'
+            break
+        default:
+            username = 'Hickory'
+            iconUrl = wolverine
+            color = '#35D0F2'
+            messageText = "Began deployment of an _SmartThingsPublic[${branch}]_ branch.  Have no idea what's going on."
+    }
     List<String> archives = []
     File rootDir = new File("${project.buildDir}/archives")
     if (rootDir.exists()) {
@@ -43,19 +81,25 @@ hipchatShareFile {
             }
         }
     }
+    Date date = new Date()
+    String fileDate = date.format('yyyy-MM-dd_HH-mm-ss', TimeZone.getTimeZone('GMT'))
 
-    // Set task properties
-    data = archives.join('\n').getBytes(StandardCharsets.UTF_8)
-    fileName = 'deployment-notes.txt'
-    contentType = 'text/html'
-}
-
-hipchatSendNotification {
-    String branch = project.hasProperty('branch') ? project.property('branch') : 'unknown'
-    message = "Began executable deploy of SmartThingsPublic(${branch})."
-    if (branch == 'master') {
-      message += ' (dev shards)'
-    }
-    color = branch == 'master' ? 'yellow' : 'red'
-    notify = true
+    // Required Task Arguments.
+    file = new FileUpload(
+        data: archives.join('\n').getBytes(StandardCharsets.UTF_8),
+        filename: "deployment-notes-${fileDate}.txt",
+        title: 'Deployment Notes',
+        channels: channel,
+        token: token,
+        color: color
+    )
+    message = new Message(
+        webhookUrl: webhookUrl,
+        username: username,
+        asUser: true,
+        iconUrl: iconUrl,
+        channel: channel,
+        fallback: 'Deployment Notification',
+        text: messageText
+    )
 }

circle.yml

@@ -15,13 +15,11 @@ deployment:
   develop:
     branch: master
     commands:
-      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD -Ps3Buckets="$S3_BUCKETS_DEV"
-      - ./gradlew hipchatSendNotification -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD -Pbranch=$CIRCLE_BRANCH
-      - ./gradlew hipchatShareFile -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD
+      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Ps3Buckets="$S3_BUCKETS_DEV"
+      - ./gradlew slackSendMessage -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Pbranch="$CIRCLE_BRANCH" -PslackToken="$SLACK_TOKEN" -PslackWebhookUrl="$SLACK_WEBHOOK_URL" -PslackChannel="$SLACK_CHANNEL" --stacktrace
 
   stage:
     branch: staging
     commands:
-      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD -Ps3Buckets="$S3_BUCKETS_STAGE"
-      - ./gradlew hipchatSendNotification -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD -Pbranch=$CIRCLE_BRANCH
-      - ./gradlew hipchatShareFile -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD
+      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Ps3Buckets="$S3_BUCKETS_STAGE"
+      - ./gradlew slackSendMessage -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Pbranch="$CIRCLE_BRANCH" -PslackToken="$SLACK_TOKEN" -PslackWebhookUrl="$SLACK_WEBHOOK_URL" -PslackChannel="$SLACK_CHANNEL" --stacktrace

devicetypes/duncanidahoct/aeon-hem-gen5-zwave-plus.src/aeon-hem-gen5-zwave-plus.groovy

@@ -0,0 +1,442 @@
+/*
+ *  Aeon HEM Gen5(zwave plus)
+ *
+ *  Copyright 2016 Dillon A. Miller
+ *
+ *  v0.8 of Aeon HEM Gen5(zwave plus) code, released 04/15/2016 for Aeotec Model zw095-a
+ *  This Gen5 device handler is not backward compatible with the Aeon V1 or V2 device. If your model number is not zw095-a, don't use it.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *		http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Some code used from various SmartThings device handlers created by:
+ *		Brock Haymond, Barry A. Burke, and Robert Vandervoort. Portions of the metering code came from ElasticDev.
+ *
+ *  Link to find the latest version of the Device Handler code:
+ *		https://gist.github.com/DuncanIdahoCT/deb2bafdd28af4fce3073b9d9f4ecafa
+ *
+ *  General notes:
+ *		You may need to change the device type to this device handler after you pair it to your hub. I'm not sure why it doesn't always automatically pair using this handler even though the fingerprint matches...
+ *		Also, you need to hit the button on the back of the HEM Gen5 a couple (two-three) times to get it to flash the red light on the front rapidly to ensure it's in inclusion mode. It isn't in the right mode if it's just flashing slow.
+ *		Once the red light is solid, look in your things list and find it, could be just called z-wave, then change it's name and device type using the graph api to this custom handler to make it start working.
+ *		The config with default intervals will send right away after you set the HEM Gen5 to this handler, please wait a few minutes before sending the config again or changing the intervals under preferences.
+ *		The purpose of the config button is just really to resend the config with monitor interval prefs, as sometimes the config isn't fully applied, See the list of config items at the bottom of this code.
+ *		You may need to send the config a few times, with about 2 minutes delay between to get all the properties to take. Not sure why-but if you look in the debug log in the graph api for this device you can see if they all applied.
+ *		I had to unplug and replug my device after extensive testing and repeatedly setting the config over and over. Could be it works for you the first time, or you may need to pull power and re plug too in order to get all the Pole 1/2 data to show in the app.
+ *
+ *	Known Issues:
+ *		Issue 1:
+ *			Not sure if this is the device handler or just a general SmartThings IOS App issue but sometimes when you set the preferences, it just spins in the app.
+ *			If you are watching the log you can see it did set the preferences. Not sure why the app gets stuck, but just reload the app and should be fine.
+ *		Issue 2:
+ *			Not really a problem, more like a limitation; the clamps 1/2 data packets are sent to the ST hub based on monitor intervals for reports groups 1-3 which you can set in the device preferences.
+ *			What this means is that, if you are paying attention to the tile data, you'll notice the center Total values don't quite work out to be the sum of Pole 1/2 values.
+ *			This is simply because the base HEM data can be "polled" whereas the clamp 1/2 data is sent. And only sent on a schedule.
+ *
+ *  Change log:
+ *		v0.1 - released 04/04/16:
+ *			Added support for secure inclusion and command encapsulation
+ *		v0.2 - released 04/05/16:
+ *			Added configuration settings using some preference variables that you can control from the app
+ *		v0.3 - released 04/05/16:
+ *			Added clamp1 and clamp2 data display, may have to hit configure a few times (wait at least 2 minute each time) to make the top left and right boxes show data from the clamps.
+ *		v0.4 - released 04/06/16:
+ *			Changed the "main" tile to display a clean total kWh, although the ST app seems to make everything on the main Things list all CAPS so it's actually displayed as KWH...
+ *		v0.5 - released 04/07/16:
+ *			Changed the main thing list device icon to st.Lighting.light14 cause it has a leaf!.
+ *		v0.6 - released 04/07/16:
+ *			Added a cost per kWh preference and a cost tile that is calculated on kWh.
+ *			Also added a timestamp of last reset button tap to work with above cost feature.
+ *		v0.7 - released 04/08/16:
+ *			Removed individual value tile polling actions and polling function.
+ *			Cleaned up and well-formed code
+ *		v0.8 - released 04/15/16:
+ *			Slightly adjusted the size of the tiles to fit all tiles into the App screen without scrolling.
+ *			Further commented and cleaned up the code in preparation for submission to SmartThings as an official device handler.
+ *			Submitted for consideration by SmartThings.
+ *
+ *	To do:
+ *		Features:
+ *			Color code tiles or tile values for hi/low usage conditions.
+ *			Possibly integrate a second tile set page with peak/min usage of watts and/or amps values over time.
+ *			Integrate PlotWatt or other online Energy tracking API based service.
+ *		Fixes:
+ *			Determine why app sometimes freezes when setting preferences, I have seen this with other devices, e.g. Arrival Sensor, Jasco Wall Switches, etc...
+ *
+ */
+
+// metadata
+metadata {
+	definition (name: "Aeon HEM Gen5(zwave plus)", namespace: "DuncanIdahoCT", author: "Dillon A. Miller") {
+		capability "Energy Meter"
+		capability "Power Meter"
+		capability "Configuration"
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+		command "reset"
+		fingerprint deviceId: "0x3101", inClusters: "0x98"
+		fingerprint inClusters: "0x5E,0x86,0x72,0x32,0x56,0x60,0x70,0x59,0x85,0x7A,0x73,0xEF,0x5A", outClusters: "0x82"
+	}
+
+	// simulator
+	simulator {
+
+		for (int i = 0; i <= 10000; i += 1000) {
+	  	status "power  ${i} W": 
+			new physicalgraph.zwave.Zwave().meterV3.meterReport(scaledMeterValue: i, precision: 3, meterType: 1, scale: 2, size: 4).incomingMessage()
+		}
+		for (int i = 0; i <= 100; i += 10) {
+			status "energy  ${i} kWh":
+			new physicalgraph.zwave.Zwave().meterV3.meterReport(scaledMeterValue: i, precision: 3, meterType: 1, scale: 0, size: 4).incomingMessage()
+		}
+	}
+
+	// tile definitions
+	tiles (scale: 2) {
+		// This tile is not displayed on the tile screen for this device but rather in the Things list.
+		valueTile("list-energy", "device.energy") {
+			state "default", label:'${currentValue} kWh', icon: "st.Lighting.light14"
+		}
+		// Tiles with a digit below relate to Clamp 1 and Clamp 2. Tiles with no digit are totals for clamps or volts.
+		valueTile("current1", "device.current1", decoration: "flat", width: 2, height: 2) {
+			state "default", label:'Pole 1\n${currentValue}\nAmps'
+		}
+		valueTile("current", "device.current", decoration: "flat", width: 2, height: 2) {
+			state "default", label:'Total\n${currentValue}\nAmps'
+		}
+		valueTile("current2", "device.current2", decoration: "flat", width: 2, height: 2) {
+			state "default", label:'Pole 2\n${currentValue}\nAmps'
+		}
+		valueTile("power1", "device.power1", decoration: "flat", width: 2, height: 2) {
+			state "default", label:'Pole 1\n${currentValue}\nWatts'
+		}
+		valueTile("power", "device.power", decoration: "flat", width: 2, height: 2) {
+			state "default", label:'Total\n${currentValue}\nWatts'
+		}
+		valueTile("power2", "device.power2", decoration: "flat", width: 2, height: 2) {
+			state "default", label:'Pole 2\n${currentValue}\nWatts'
+		}
+		valueTile("voltage", "device.voltage", decoration: "flat", width: 2, height: 1) {
+			state "default", label:'${currentValue} V'
+		}
+		valueTile("energy", "device.energy", decoration: "flat", width: 2, height: 1) {
+			state "default", label:'${currentValue} kWh'
+		}
+		valueTile("cost", "device.cost", decoration: "flat", width: 2, height: 1) {
+			state "default", label:'\$${currentValue}'
+		}
+		valueTile("lastresetlabel", "device.lastresettime", decoration: "flat", width: 3, height: 1) {
+			state "default", label:'Last Reset Timestamp'
+		}
+		valueTile("lastresettime", "device.lastresettime", decoration: "flat", width: 3, height: 1) {
+			state "default", label:'${currentValue}'
+		}
+		standardTile("configure", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+		standardTile("reset", "device.energy", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:'reset kWh', action:"reset"
+		}
+		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		main "list-energy"
+		details(["current1","current","current2","power1","power","power2","voltage","energy","cost","lastresetlabel","lastresettime","configure","reset","refresh"])
+	}
+
+	preferences {
+		
+		input "kWhCost", "string",
+			title: "Cost in \$/kWh",
+			description: "Your Electric Bill Cost Per kWh",
+			defaultValue: "0.19514" as String,
+			required: false,
+			displayDuringSetup: true
+		input "monitorInterval1", "integer",
+			title: "Volts & kWh Report",
+			description: "Interval (secs) for Volts & kWh Report",
+			defaultValue: 60,
+			range: "1..4294967295?",
+			required: false,
+			displayDuringSetup: true
+		input "monitorInterval2", "integer",
+			title: "Amps Report",
+			description: "Interval (secs) for Amps Report",
+			defaultValue: 30,
+			range: "1..4294967295?",
+			required: false,
+			displayDuringSetup: true
+		input "monitorInterval3", "integer",
+			title: "Watts Report",
+			description: "Interval (secs) for Watts Report",
+			defaultValue: 6,
+			range: "1..4294967295?",
+			required: false,
+			displayDuringSetup: true
+	}
+
+}
+
+def updated(){
+	if (state.sec && !isConfigured()) {
+		// in case we miss the SCSR
+		response(configure())
+	}
+}
+
+def parse(String description){
+	def result = null
+	if (description.startsWith("Err 106")) {
+		state.sec = 0
+		result = createEvent( name: "secureInclusion", value: "failed", isStateChange: true,
+			descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
+	} else if (description != "updated") {
+		def cmd = zwave.parse(description, [0x32: 3, 0x56: 1, 0x59: 1, 0x5A: 1, 0x60: 3, 0x70: 1, 0x72: 2, 0x73: 1, 0x82: 1, 0x85: 2, 0x86: 2, 0x8E: 2, 0xEF: 1])
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+//log.debug "Parsed '${description}' to ${result.inspect()}"
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x32: 3, 0x56: 1, 0x59: 1, 0x5A: 1, 0x60: 3, 0x70: 1, 0x72: 2, 0x73: 1, 0x82: 1, 0x85: 2, 0x86: 2, 0x8E: 2, 0xEF: 1])
+	state.sec = 1
+//log.debug "encapsulated: ${encapsulatedCommand}"
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupportedReport cmd) {
+	response(configure())
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+    log.debug "---CONFIGURATION REPORT V1--- ${device.displayName} parameter ${cmd.parameterNumber} with a byte size of ${cmd.size} is set to ${cmd.configurationValue}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.associationv2.AssociationReport cmd) {
+    log.debug "---ASSOCIATION REPORT V2--- ${device.displayName} groupingIdentifier: ${cmd.groupingIdentifier}, maxNodesSupported: ${cmd.maxNodesSupported}, nodeId: ${cmd.nodeId}, reportsToFollow: ${cmd.reportsToFollow}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.meterv3.MeterReport cmd) {
+    def meterTypes = ["Unknown", "Electric", "Gas", "Water"]
+    def electricNames = ["energy", "energy", "power", "count",  "voltage", "current", "powerFactor",  "unknown"]
+    def electricUnits = ["kWh",    "kVAh",   "W",     "pulses", "V",       "A",       "Power Factor", ""]
+
+    //NOTE ScaledPreviousMeterValue does not always contain a value
+    def previousValue = cmd.scaledPreviousMeterValue ?: 0
+
+    //Here is where all HEM polled values are defined. Scale(0-7) is in reference to the Aeon Labs HEM Gen5 data for kWh, kVAh, W, V, A, and M.S.T. respectively.
+    //If scale 7 (M.S.T.) is polled, you would receive Scale2(0-1) which is kVar, and kVarh respectively. We are ignoring the Scale2 ranges in this device handler.
+    def map = [ name: electricNames[cmd.scale], unit: electricUnits[cmd.scale], displayed: state.display]
+    switch(cmd.scale) {
+        case 0: //kWh
+						previousValue = device.currentValue("energy") ?: cmd.scaledPreviousMeterValue ?: 0
+						BigDecimal costDecimal = cmd.scaledMeterValue * (kWhCost as BigDecimal)
+						def costDisplay = String.format("%5.2f",costDecimal)
+						sendEvent(name: "cost", value: costDisplay, unit: "", descriptionText: "Display Cost: \$${costDisp}")
+						map.value = cmd.scaledMeterValue
+            break;
+        case 1: //kVAh (not used in the U.S.)
+            map.value = cmd.scaledMeterValue
+            break;
+        case 2: //Watts
+            previousValue = device.currentValue("power") ?: cmd.scaledPreviousMeterValue ?: 0
+            map.value = Math.round(cmd.scaledMeterValue)
+            break;
+        case 3: //pulses
+						map.value = Math.round(cmd.scaledMeterValue)
+            break;
+        case 4: //Volts
+            previousValue = device.currentValue("voltage") ?: cmd.scaledPreviousMeterValue ?: 0
+            map.value = cmd.scaledMeterValue
+            break;
+        case 5: //Amps
+            previousValue = device.currentValue("current") ?: cmd.scaledPreviousMeterValue ?: 0
+            map.value = cmd.scaledMeterValue
+            break;
+        case 6: //Power Factor
+        case 7: //Scale2 values (not currently implimented or needed)
+            map.value = cmd.scaledMeterValue
+            break;
+        default:
+            break;
+    }
+createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
+	//This is where the HEM clamp1 and clamp2 (subdevice) report values are defined. Scale(2,5) is in reference to the Aeon Labs HEM Gen5 (subdevice) data for W, and A respectively.
+	//Z-Wave Command Class 0x60 (multichannelv3) is necessary to interpret the subdevice data from the HEM clamps.
+	//In addition, "cmd.commandClass == 50" and "encapsulatedCommand([0x30: 1, 0x31: 1])" below is necessary to properly receive and inturpret the encasulated subdevice data sent to the SmartThings hub by the HEM.
+	//The numbered "command class" references: 50, 0x30v1, and 0x31v1 do not seem to be true Z-Wave Command Classes and any correlation is seemingly coincidental.
+	//It should also be noted that without the above, the data received will not be processed here under the 0x60 (multichannelv3) command class and you will see unhandled messages from the HEM along with references to command class 50 as well as Meter Types 33, and 161.
+	//sourceEndPoint 1, and 2 are the Clamps 1, and 2.
+	def dispValue
+	def newValue
+	def formattedValue
+	def MAX_AMPS = 220
+	def MAX_WATTS = 24000
+	if (cmd.commandClass == 50) { //50 is likely a manufacturer specific code, Z-Wave specifies this as a "Basic Window Covering" so it's not a true Z-Wave Command Class.   
+		def encapsulatedCommand = cmd.encapsulatedCommand([0x30: 1, 0x31: 1]) // The documentation on working with Z-Wave subdevices and the technical specs from Aeon Labs do not explain this adequately, but it's necessary.
+	//log.debug ("Command from endpoint ${cmd.sourceEndPoint}: ${encapsulatedCommand}")
+		if (encapsulatedCommand) {
+			if (cmd.sourceEndPoint == 1) {
+				if (encapsulatedCommand.scale == 2 ) {
+						newValue = Math.round(encapsulatedCommand.scaledMeterValue)
+	                    if (newValue > MAX_WATTS) { return }
+						formattedValue = newValue
+						dispValue = "${formattedValue}"
+						sendEvent(name: "power1", value: dispValue as String, unit: "", descriptionText: "L1 Power: ${formattedValue} Watts")
+				}
+				if (encapsulatedCommand.scale == 5 ) {
+						newValue = Math.round(encapsulatedCommand.scaledMeterValue * 100) / 100
+	                    if (newValue > MAX_AMPS) { return }
+						formattedValue = String.format("%5.2f", newValue)
+						dispValue = "${formattedValue}"
+						sendEvent(name: "current1", value: dispValue as String, unit: "", descriptionText: "L1 Current: ${formattedValue} Amps")
+				}
+			}
+			else if (cmd.sourceEndPoint == 2) {
+				if (encapsulatedCommand.scale == 2 ) {
+						newValue = Math.round(encapsulatedCommand.scaledMeterValue)
+	                    if (newValue > MAX_WATTS) { return }
+						formattedValue = newValue
+						dispValue = "${formattedValue}"
+						sendEvent(name: "power2", value: dispValue as String, unit: "", descriptionText: "L2 Power: ${formattedValue} Watts")
+				}
+				if (encapsulatedCommand.scale == 5 ) {
+						newValue = Math.round(encapsulatedCommand.scaledMeterValue * 100) / 100
+	                    if (newValue > MAX_AMPS) { return }
+						formattedValue = String.format("%5.2f", newValue)
+						dispValue = "${formattedValue}"
+						sendEvent(name: "current2", value: dispValue as String, unit: "", descriptionText: "L2 Current: ${formattedValue} Amps")
+				}
+			}
+		}
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	//This will log any unhandled command output to the debug window.
+	log.debug "Unhandled: $cmd"
+    createEvent(descriptionText: cmd.toString(), isStateChange: false)
+}
+
+def refresh() {
+	def request = [
+	//This is where the tile action "refresh" is defined. Refresh is very basic. It simply gets and displays the latest values from the HEM exclusive of the clamp subdevices.
+		zwave.meterV3.meterGet(scale: 0),	//kWh
+		zwave.meterV3.meterGet(scale: 2),	//Wattage
+		zwave.meterV3.meterGet(scale: 4),	//Volts
+		zwave.meterV3.meterGet(scale: 5),	//Amps
+	]
+	commands(request)
+}
+
+def reset() {
+	//This is where the tile action "reset" is defined. Reset is only meant to be used once a month on the end/beginning of your electric utility billing cycle.
+	//Tapping reset will send the meter reset command to HEM and zero out the kWh data so you can start fresh.
+	//This will also clear the cost data and reset the last reset timestamp. Finally it will poll for latest values from the HEM.
+	//This has no impact on Pole1 or Pole2 (clamp1 and clamp2 subdevice) tile data as that is sent via reports from the HEM.
+	def dateString = new Date().format("M/d/YY", location.timeZone)
+	def timeString = new Date().format("h:mm a", location.timeZone)    
+	state.lastresettime = dateString+" @ "+timeString
+	sendEvent(name: "lastresettime", value: state.lastresettime)	
+	def request = [
+		zwave.meterV3.meterReset(),
+		zwave.meterV3.meterGet(scale: 0),	//kWh
+		zwave.meterV3.meterGet(scale: 2),	//Wattage
+		zwave.meterV3.meterGet(scale: 4),	//Volts
+		zwave.meterV3.meterGet(scale: 5),	//Amps
+	]
+	commands(request)
+}
+
+def configure() {
+	//This is where the tile action "configure" is defined. Configure resends the configuration commands below (using the variables set by the preferences section above) to the HEM Gen5 device.
+	//If you're watching the debug log when you tap configure, you should see the full configuration report come back slowly over about a minute.
+	//If you don't see the full configuration report (seven messages) followed by the association report, tap configure again.
+	def monitorInt1 = 60
+		if (monitorInterval1) {
+			monitorInt1=monitorInterval1.toInteger()
+		}
+	def monitorInt2 = 30
+		if (monitorInterval2) {
+			monitorInt2=monitorInterval2.toInteger()
+		}
+	def monitorInt3 = 6
+		if (monitorInterval3) {
+			monitorInt3=monitorInterval3.toInteger()
+	}
+	log.debug "Sending configure commands - kWhCost '${kWhCost}', monitorInterval1 '${monitorInt1}', monitorInterval2 '${monitorInt2}', monitorInterval3 '${monitorInt3}'"
+	def request = [
+		// Reset switch configuration to defaults.
+	//zwave.configurationV1.configurationSet(parameterNumber: 255, size: 1, scaledConfigurationValue: 1),
+		// Disable selective reporting, so always update based on schedule below <set to 1 to reduce network traffic>.
+		zwave.configurationV1.configurationSet(parameterNumber: 3, size: 1, scaledConfigurationValue: 1),
+		// (DISABLED by first option) Don't send unless watts have changed by 50 <default>.
+		zwave.configurationV1.configurationSet(parameterNumber: 4, size: 2, scaledConfigurationValue: 10),
+		// (DISABLED by first option) Or by 10% <default>.
+		zwave.configurationV1.configurationSet(parameterNumber: 8, size: 1, scaledConfigurationValue: 5),
+
+		// Which reports need to send in Report group 1.
+		zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 6149),
+		// Which reports need to send in Report group 2.
+		zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 1572872),
+		// Which reports need to send in Report group 3.
+		zwave.configurationV1.configurationSet(parameterNumber: 103, size: 4, scaledConfigurationValue: 770),
+		// Interval to send Report group 1.
+		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: monitorInt1),
+		// Interval to send Report group 2.
+		zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: monitorInt2),
+		// Interval to send Report group 3.
+		zwave.configurationV1.configurationSet(parameterNumber: 113, size: 4, scaledConfigurationValue: monitorInt3),
+
+		// Report which configuration commands were sent to and received by the HEM Gen5 successfully.
+		zwave.configurationV1.configurationGet(parameterNumber: 3),
+		zwave.configurationV1.configurationGet(parameterNumber: 4),
+		zwave.configurationV1.configurationGet(parameterNumber: 8),
+		zwave.configurationV1.configurationGet(parameterNumber: 101),
+		zwave.configurationV1.configurationGet(parameterNumber: 102),
+		zwave.configurationV1.configurationGet(parameterNumber: 103),
+		zwave.configurationV1.configurationGet(parameterNumber: 111),
+		zwave.configurationV1.configurationGet(parameterNumber: 112),
+		zwave.configurationV1.configurationGet(parameterNumber: 113),
+		zwave.associationV2.associationGet(groupingIdentifier: 1)
+	]
+	commands(request)
+}
+
+private setConfigured() {
+	updateDataValue("configured", "true")
+}
+
+private isConfigured() {
+	getDataValue("configured") == "true"
+}
+
+private command(physicalgraph.zwave.Command cmd) {
+	if (state.sec) {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	} else {
+		cmd.format()
+	}
+}
+
+private commands(commands, delay=500) {
+	delayBetween(commands.collect{ command(it) }, delay)
+}

devicetypes/fibargroup/fibaro-door-window-sensor-zw5-with-temperature.src/fibaro-door-window-sensor-zw5-with-temperature.groovy

@@ -0,0 +1,272 @@
+/**
+ *  Fibaro Door/Window Sensor ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Battery"
+		capability "Contact Sensor"
+		capability "Sensor"
+        capability "Configuration"
+        capability "Tamper Alert"
+        
+        capability "Temperature Measurement"
+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x31, 0x86", outClusters: ""
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x31, 0x86, 0x84", outClusters: ""//actual NIF
+	}
+
+	simulator {
+		
+	}
+    
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
+            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}  
+        }
+                
+        valueTile("battery", "device.battery", inactiveLabel: false, , width: 2, height: 2, decoration: "flat") {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 31, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 95, color: "#d04e00"],
+				[value: 96, color: "#bc2323"]
+			]
+		}
+        
+        main "FGK"
+        details(["FGK","battery", "temperature"])
+    }
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"   
+    def result = []
+    
+    if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGK failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+    	def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+    
+    	if (cmd) {
+    		log.debug "Parsed '${cmd}'"
+        	zwaveEvent(cmd)
+    	}
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x98: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x31: 5, 0x72: 2, 0x80: 1, 0x86: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	//it is assumed that default notification events are used
+    //(parameter 20 was not changed before device's re-inclusion)
+    def map = [:]
+    if (cmd.notificationType == 6) {
+    	switch (cmd.event) {                
+        	case 22:
+            	map.name = "contact"
+                map.value = "open"
+                map.descriptionText = "${device.displayName}: is open"
+            	break
+                
+            case 23:
+            	map.name = "contact"
+                map.value = "closed"
+                map.descriptionText = "${device.displayName}: is closed"
+            	break
+        }
+    } else if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	map.name = "tamper"
+                map.value = "inactive"
+                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+				break
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+        }
+    }
+    
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {    
+    def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def map = [:]
+	if (cmd.sensorType == 1) {
+        // temperature
+        def cmdScale = cmd.scale == 1 ? "F" : "C"
+        map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+        map.unit = getTemperatureScale()
+        map.name = "temperature"
+        map.displayed = true
+	}
+	
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+    
+    def cmds = []
+        
+    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+    
+    encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+    def secureClasses = [0x20, 0x2B, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+    
+    //todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -0,0 +1,239 @@
+/**
+ *  Fibaro Door/Window Sensor ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Battery"
+		capability "Contact Sensor"
+		capability "Sensor"
+        capability "Configuration"
+        capability "Tamper Alert"
+
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x86, 0x84", outClusters: ""
+	}
+
+	simulator {
+		
+	}
+        
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
+            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}  
+        }
+                
+        valueTile("battery", "device.battery", inactiveLabel: false, , width: 2, height: 2, decoration: "flat") {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        main "FGK"
+        details(["FGK","battery"])
+    }
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"   
+    def result = []
+    
+    if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGK failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+    	def cmd = zwave.parse(description, [0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+    
+    	if (cmd) {
+    		log.debug "Parsed '${cmd}'"
+        	zwaveEvent(cmd)
+    	}
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x98: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x72: 2, 0x80: 1, 0x86: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	//it is assumed that default notification events are used
+    //(parameter 20 was not changed before device's re-inclusion)
+    def map = [:]
+    if (cmd.notificationType == 6) {
+    	switch (cmd.event) {                
+        	case 22:
+            	map.name = "contact"
+                map.value = "open"
+                map.descriptionText = "${device.displayName}: is open"
+            	break
+                
+            case 23:
+            	map.name = "contact"
+                map.value = "closed"
+                map.descriptionText = "${device.displayName}: is closed"
+            	break
+        }
+    } else if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	map.name = "tamper"
+                map.value = "inactive"
+                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+				break
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+        }
+    }
+    
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {    
+    def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+    
+    def cmds = []
+    
+    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+    
+    encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+    def secureClasses = [0x20, 0x2B, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+    
+    //todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -0,0 +1,269 @@
+/**
+ *  Fibaro Flood Sensor ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Battery"
+		capability "Configuration"
+		capability "Sensor"
+		capability "Tamper Alert"
+		capability "Temperature Measurement"
+		capability "Water Sensor"
+        
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
+	}
+
+	simulator {
+    
+	}
+    
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.water", key:"PRIMARY_CONTROL") {
+            	attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#79b821")
+            	attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#ffa81e")
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}       
+        }
+        
+        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 31, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 95, color: "#d04e00"],
+				[value: 96, color: "#bc2323"]
+			]
+		}
+       	        
+        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        	state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        main "FGFS"
+        details(["FGFS","battery", "temperature"])
+    }
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+	def result = []
+    
+    if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGFS failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+        def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72:2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+
+        if (cmd) {
+            log.debug "Parsed '${cmd}'"
+            zwaveEvent(cmd)
+        }
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x31: 5, 0x72: 2, 0x80: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
+{
+	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))    
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def map = [:]
+    if (cmd.notificationType == 5) {
+    	switch (cmd.event) {                
+        	case 2:
+            	map.name = "water"
+                map.value = "wet"
+                map.descriptionText = "${device.displayName} is ${map.value}"
+            	break
+                
+            case 0:
+            	map.name = "water"
+                map.value = "dry"
+                map.descriptionText = "${device.displayName} is ${map.value}"
+            	break
+        }
+    } else if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	map.name = "tamper"
+                map.value = "inactive"
+                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+				break
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+        }
+    }
+    
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def map = [:]
+	if (cmd.sensorType == 1) {
+        // temperature
+        def cmdScale = cmd.scale == 1 ? "F" : "C"
+        map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+        map.unit = getTemperatureScale()
+        map.name = "temperature"
+        map.displayed = true
+	}
+	
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+	
+    def cmds = []
+    
+	cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGFS' default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+
+	encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+	def secureClasses = [0x20, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+
+	//todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -0,0 +1,281 @@
+/**
+ *  Fibaro Motion Sensor ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Battery"
+		capability "Configuration"
+		capability "Illuminance Measurement"
+		capability "Motion Sensor"
+		capability "Sensor"
+		capability "Tamper Alert"
+		capability "Temperature Measurement"
+        
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x30, 0x9C, 0x98, 0x7A", outClusters: ""
+	}
+    
+	simulator {
+		
+    }
+    
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGMS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.motion", key:"PRIMARY_CONTROL") {
+            	attributeState("inactive", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
+            	attributeState("active", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")   
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}  
+        }
+        
+        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 31, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 95, color: "#d04e00"],
+				[value: 96, color: "#bc2323"]
+			]
+		}
+        
+        valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
+			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+		}
+        
+        valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        main "FGMS"
+        details(["FGMS","battery","temperature","illuminance"])
+    }
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"        
+    def result = []
+    
+    if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGK failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+    	def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+    
+    	if (cmd) {
+    		log.debug "Parsed '${cmd}'"
+        	zwaveEvent(cmd)
+    	}
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x31: 5, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def map = [ displayed: true ]
+    switch (cmd.sensorType) {
+    	case 1:
+        	map.name = "temperature"
+            map.unit = cmd.scale == 1 ? "F" : "C"
+            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, map.unit, cmd.precision)
+            break
+    	case 3:
+        	map.name = "illuminance"
+            map.value = cmd.scaledSensorValue.toInteger().toString()
+            map.unit = "lux"
+            break
+    }
+
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def map = [:]
+    if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	if (cmd.eventParameter[0] == 3) {
+            		map.name = "tamper"
+                    map.value = "inactive"
+                    map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+            	}
+            	if (cmd.eventParameter[0] == 8) {
+                	map.name = "motion"
+                    map.value = "inactive"
+                    map.descriptionText = "${device.displayName}: motion has stopped"
+                }
+        		break
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+                
+            case 8:
+                map.name = "motion"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: motion detected"
+                break
+        }
+    }
+    
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
+{
+	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1))     
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+    
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+    
+    def cmds = []
+    
+    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds: 7200, nodeid: zwaveHubNodeId)//FGMS' default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId])
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1)
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+    
+    encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16encapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+	def secureClasses = [0x20, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+
+	//todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/smartthings/arrival-sensor-ha.src/i18n/messages.properties

@@ -1,16 +1,16 @@
 #==============================================================================
 #  Copyright 2016 SmartThings
 #
-#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
-#  use this file except in compliance with the License. You may obtain a copy 
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+#  use this file except in compliance with the License. You may obtain a copy
 #  of the License at:
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
-#  Unless required by applicable law or agreed to in writing, software 
-#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
-#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
-#  License for the specific language governing permissions and limitations 
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#  License for the specific language governing permissions and limitations
 #  under the License.
 #==============================================================================
 # Purpose: Arrival Sensor HA i18n Translation File
@@ -23,13 +23,14 @@
 #==============================================================================
 # Korean (ko)
 # Device Preferences
-'''Give your device a name'''.ko=기기 이름 바꾸기
+'''Give your device a name'''.ko=기기 이름 설정
 '''Set Device Image'''.ko=기기 이미지 설정
-'''Presence timeout (minutes)'''.ko=시간 초과. 스마트폰 위치 정보
+'''Presence timeout (minutes)'''.ko=알람 유예 시간 설정 (분)
 '''Tap to set'''.ko=눌러서 설정
 '''Arrival Sensor'''.ko=도착알림 센서
+'''${currentValue}% battery'''.ko=${currentValue}% 배터리
 # Events / Notifications
-'''{{ linkText }} battery was {{ value }}'''.ko={{ linkText }}남아있는 배터리는 {{ value }}입니다.
-'''{{ linkText }} has arrived'''.ko={{ linkText }}집에 도착했습니다.
-'''{{ linkText }} has left'''.ko={{ linkText }}집을 나갔습니다.
+'''{{ linkText }} battery was {{ value }}'''.ko={{ linkText }}의 남은 배터리 {{ value }}
+'''{{ linkText }} has arrived'''.ko={{ linkText }} 귀가
+'''{{ linkText }} has left'''.ko={{ linkText }} 외출
 #==============================================================================

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -30,10 +30,10 @@ metadata {
 	tiles (scale: 2){
 		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#C6C7CC", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#C6C7CC", nextState:"turningOn"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel", range:"(0..100)"

devicetypes/smartthings/mobile-presence.src/i18n/messages.properties

@@ -23,10 +23,10 @@
 #==============================================================================
 # Korean (ko)
 # Device Preferences
-'''Give your device a name'''.ko=기기 이름 바꾸기
+'''Give your device a name'''.ko=기기 이름 설정
 '''Set Device Image'''.ko=기기 이미지 설정
 # Events / Notifications
-'''{{ linkText }} has left'''.ko={{ linkText }}집을 나갔습니다.
-'''{{ linkText }} has arrived'''.ko={{ linkText }}집에 도착했습니다.
+'''{{ linkText }} has left'''.ko={{ linkText }} 외출
+'''{{ linkText }} has arrived'''.ko={{ linkText }} 귀가
 '''present'''.ko=집안
 '''not present'''.ko=외출

devicetypes/smartthings/smartpower-outlet.src/i18n/messages.properties

@@ -22,10 +22,14 @@
 #==============================================================================
 # Korean (ko)
 # Device Preferences
-'''Give your device a name'''.ko=기기 이름 바꾸기
-'''Outlet'''.ko=플러그
+'''Give your device a name'''.ko=기기 이름 설정
+'''Outlet'''.ko= 스마트 플러그 
 # Events descriptionText
-'''{{ device.displayName }} is On'''.ko={{ device.displayName }}켜졌습니다.
-'''{{ device.displayName }} is Off'''.ko={{ device.displayName }}꺼졌습니다.
-'''{{ device.displayName }} power is {{ value }} Watts'''.ko={{ device.displayName }} 전원은 {{ value }}와트입니다
+'''{{ device.displayName }} is On'''.ko={{ device.displayName }} 켜짐
+'''{{ device.displayName }} is Off'''.ko={{ device.displayName }} 꺼짐
+'''{{ device.displayName }} power is {{ value }} Watts'''.ko={{ device.displayName }} 전력은 {{ value }}와트입니다.
+'''On'''.ko= 켜짐
+'''Off'''.ko=꺼짐
+'''Turning On'''.ko=켜는 중
+'''Turning Off'''.ko=끄는 중
 #==============================================================================

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -65,10 +65,10 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
-				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
-				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
-				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "on", label: 'On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "off", label: 'Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "turningOn", label: 'Turning On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "turningOff", label: 'Turning Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
 			}
 			tileAttribute ("power", key: "SECONDARY_CONTROL") {
 				attributeState "power", label:'${currentValue} W'

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -22,6 +22,8 @@
 #==============================================================================
 # Korean (ko)
 # Device Preferences
+'''Dry'''.ko=건조
+'''Wet'''.ko=누수
 '''dry'''.ko=건조
 '''wet'''.ko=누수
 '''battery'''.ko=배터리
@@ -29,13 +31,14 @@
 '''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
 '''Degrees'''.ko=온도
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Give your device a name'''.ko=기기 이름 바꾸기
-'''Water Leak Sensor'''.ko=누수센서
+'''Give your device a name'''.ko=기기 이름 설정
+'''Water Leak Sensor'''.ko=누수감지 센서
+'''${currentValue}% battery'''.ko=${currentValue}% 배터리
 # Events descriptionText
 '''{{ device.displayName }} is dry'''.ko={{ device.displayName }}가 건조
 '''{{ device.displayName }} is wet'''.ko={{ device.displayName }}누수
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
 '''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
 #==============================================================================

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -28,13 +28,16 @@
 '''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
 '''Degrees'''.ko=온도
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Give your device a name'''.ko=기기 이름 바꾸기
+'''Give your device a name'''.ko=기기 이름 설정
 '''Motion Sensor'''.ko=모션 센서
+'''motion'''.ko= 동작 감지 
+'''no motion'''.ko=동작 없음
+'''${currentValue}% battery'''.ko=${currentValue}% 배터리
 # Events descriptionText
-'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }} 가 움직임을 감지하였습니다.
-'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }}움직임이 중단되었습니다
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
+'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }}에서 움직임이 감지되었습니다.
+'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }}에서 움직임이 중단되었습니다.
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
 '''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
 #==============================================================================

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -31,15 +31,20 @@
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
 '''Do you want to use this sensor on a garage door?'''.ko=차고 문의 센서 사용 설정하기
 '''Tap to set'''.ko=눌러서 설정
-'''Give your device a name'''.ko=기기 이름 바꾸기
-'''Multipurpose Sensor'''.ko=멀티 센서
+'''Give your device a name'''.ko=기기 이름 설정
+'''Multipurpose Sensor'''.ko=문 및 창 센서
 # Events descriptionText
-'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}열림을 감지하였습니다.
-'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}닫혔습니다.
-'''{{ device.displayName }} was active'''.ko={{ device.displayName }}활성화되었습니다.
-'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }}비활성화되었습니다.
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
+'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}에서 열림이 감지되었습니다.
+'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}에서 닫힘이 감지되었습니다.
+'''{{ device.displayName }} was active'''.ko={{ device.displayName }} 활성화
+'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }} 비활성화
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
 '''Updating device to garage sensor'''.ko=기기-차고 센서 업데이트 중
 '''Updating device to open/close sensor'''.ko=기기-열림/닫힘 센서 업데이트 중
+'''Inactive'''.ko=비활성 상태
+'''Active'''.ko=활성 상태
+'''Open'''.ko= 열림이 감지될 때
+'''Closed'''.ko=닫힘
+'''${currentValue}% battery'''.ko=${currentValue}% 배터리

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -83,19 +83,19 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+				attributeState "open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
 				attributeState "garage-open", label:'Open', icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e"
 				attributeState "garage-closed", label:'Closed', icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821"
 			}
 		}
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
+			state("active", label:'Active', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'Inactive', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°',

devicetypes/smartthings/tile-ux/tile-basic-carousel.src/tile-basic-carousel.groovy

@@ -0,0 +1,225 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "carouselDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Thermostat"
+		capability "Relative Humidity Measurement"
+
+		command "tempUp"
+		command "tempDown"
+		command "heatUp"
+		command "heatDown"
+		command "coolUp"
+		command "coolDown"
+		command "setTemperature", ["number"]
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"thermostatMulti", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("default", action: "setTemperature")
+			}
+			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
+				attributeState("default", label:'${currentValue}%', unit:"%")
+			}
+			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+				attributeState("idle", backgroundColor:"#44b621")
+				attributeState("heating", backgroundColor:"#ffa81e")
+				attributeState("cooling", backgroundColor:"#269bd2")
+			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+				attributeState("off", label:'${name}')
+				attributeState("heat", label:'${name}')
+				attributeState("cool", label:'${name}')
+				attributeState("auto", label:'${name}')
+			}
+			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+		}
+
+		main("thermostatMulti")
+		details([
+			"thermostatMulti"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "temperature", value: 72, unit: "F")
+	sendEvent(name: "heatingSetpoint", value: 70, unit: "F")
+	sendEvent(name: "thermostatSetpoint", value: 70, unit: "F")
+	sendEvent(name: "coolingSetpoint", value: 76, unit: "F")
+	sendEvent(name: "thermostatMode", value: "off")
+	sendEvent(name: "thermostatFanMode", value: "fanAuto")
+	sendEvent(name: "thermostatOperatingState", value: "idle")
+	sendEvent(name: "humidity", value: 53, unit: "%")
+}
+
+def parse(String description) {
+}
+
+def evaluate(temp, heatingSetpoint, coolingSetpoint) {
+	log.debug "evaluate($temp, $heatingSetpoint, $coolingSetpoint"
+	def threshold = 1.0
+	def current = device.currentValue("thermostatOperatingState")
+	def mode = device.currentValue("thermostatMode")
+
+	def heating = false
+	def cooling = false
+	def idle = false
+	if (mode in ["heat","emergency heat","auto"]) {
+		if (heatingSetpoint - temp >= threshold) {
+			heating = true
+			sendEvent(name: "thermostatOperatingState", value: "heating")
+		}
+		else if (temp - heatingSetpoint >= threshold) {
+			idle = true
+		}
+		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
+	}
+	if (mode in ["cool","auto"]) {
+		if (temp - coolingSetpoint >= threshold) {
+			cooling = true
+			sendEvent(name: "thermostatOperatingState", value: "cooling")
+		}
+		else if (coolingSetpoint - temp >= threshold && !heating) {
+			idle = true
+		}
+		sendEvent(name: "thermostatSetpoint", value: coolingSetpoint)
+	}
+	else {
+		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
+	}
+	if (idle && !heating && !cooling) {
+		sendEvent(name: "thermostatOperatingState", value: "idle")
+	}
+}
+
+def setHeatingSetpoint(Double degreesF) {
+	log.debug "setHeatingSetpoint($degreesF)"
+	sendEvent(name: "heatingSetpoint", value: degreesF)
+	evaluate(device.currentValue("temperature"), degreesF, device.currentValue("coolingSetpoint"))
+}
+
+def setCoolingSetpoint(Double degreesF) {
+	log.debug "setCoolingSetpoint($degreesF)"
+	sendEvent(name: "coolingSetpoint", value: degreesF)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), degreesF)
+}
+
+def setThermostatMode(String value) {
+	sendEvent(name: "thermostatMode", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def setThermostatFanMode(String value) {
+	sendEvent(name: "thermostatFanMode", value: value)
+}
+
+def off() {
+	sendEvent(name: "thermostatMode", value: "off")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def heat() {
+	sendEvent(name: "thermostatMode", value: "heat")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def auto() {
+	sendEvent(name: "thermostatMode", value: "auto")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def emergencyHeat() {
+	sendEvent(name: "thermostatMode", value: "emergency heat")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def cool() {
+	sendEvent(name: "thermostatMode", value: "cool")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def fanOn() {
+	sendEvent(name: "thermostatFanMode", value: "fanOn")
+}
+
+def fanAuto() {
+	sendEvent(name: "thermostatFanMode", value: "fanAuto")
+}
+
+def fanCirculate() {
+	sendEvent(name: "thermostatFanMode", value: "fanCirculate")
+}
+
+def tempUp() {
+	def ts = device.currentState("temperature")
+	def value = ts ? ts.integerValue + 1 : 72
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def tempDown() {
+	def ts = device.currentState("temperature")
+	def value = ts ? ts.integerValue - 1 : 72
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def setTemperature(value) {
+	def ts = device.currentState("temperature")
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def heatUp() {
+	def ts = device.currentState("heatingSetpoint")
+	def value = ts ? ts.integerValue + 1 : 68
+	sendEvent(name:"heatingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
+}
+
+def heatDown() {
+	def ts = device.currentState("heatingSetpoint")
+	def value = ts ? ts.integerValue - 1 : 68
+	sendEvent(name:"heatingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
+}
+
+
+def coolUp() {
+	def ts = device.currentState("coolingSetpoint")
+	def value = ts ? ts.integerValue + 1 : 76
+	sendEvent(name:"coolingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
+}
+
+def coolDown() {
+	def ts = device.currentState("coolingSetpoint")
+	def value = ts ? ts.integerValue - 1 : 76
+	sendEvent(name:"coolingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
+}

devicetypes/smartthings/tile-ux/tile-basic-colorwheel.src/tile-basic-colorwheel.groovy

@@ -0,0 +1,52 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "colorWheelDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Color Control"
+	}
+
+	tiles(scale: 2) {
+		valueTile("currentColor", "device.color") {
+			state "default", label: '${currentValue}'
+		}
+
+		controlTile("rgbSelector", "device.color", "color", height: 6, width: 6, inactiveLabel: false) {
+			state "color", action: "color control.setColor"
+		}
+
+		main("currentColor")
+		details([
+			"rgbSelector"
+		])
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+}
+
+def setSaturation(percent) {
+	log.debug "Executing 'setSaturation'"
+	sendEvent(name: "saturation", value: percent)
+}
+
+def setHue(percent) {
+	log.debug "Executing 'setHue'"
+	sendEvent(name: "hue", value: percent)
+}

devicetypes/smartthings/tile-ux/tile-basic-presence.src/tile-basic-presence.groovy

@@ -0,0 +1,63 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "presenceDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Presence Sensor"
+
+		command "arrived"
+		command "departed"
+	}
+
+	tiles(scale: 2) {
+		// You only get a presence tile view when the size is 3x3 otherwise it's a value tile
+		standardTile("presence", "device.presence", width: 3, height: 3, canChangeBackground: true) {
+			state("present", labelIcon:"st.presence.tile.mobile-present", backgroundColor:"#53a7c0")
+			state("not present", labelIcon:"st.presence.tile.mobile-not-present", backgroundColor:"#ebeef2")
+		}
+
+		standardTile("notPresentBtn", "device.fake", width: 3, height: 3, decoration: "flat") {
+			state("not present", label:'not present', backgroundColor:"#ffffff", action:"departed")
+		}
+
+		standardTile("presentBtn", "device.fake", width: 3, height: 3, decoration: "flat") {
+			state("present", label:'present', backgroundColor:"#53a7c0", action:"arrived")
+		}
+
+		main("presence")
+		details([
+			"presence", "presenceControl", "notPresentBtn", "presentBtn"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "presence", value: "present")
+}
+
+def parse(String description) {
+}
+
+def arrived() {
+	log.trace "Executing 'arrived'"
+	sendEvent(name: "presence", value: "present")
+}
+
+def departed() {
+	log.trace "Executing 'arrived'"
+	sendEvent(name: "presence", value: "not present")
+}

devicetypes/smartthings/tile-ux/tile-basic-slider.src/tile-basic-slider.groovy

@@ -0,0 +1,75 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "sliderDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Switch Level"
+		command "setRangedLevel", ["number"]
+	}
+
+	tiles(scale: 2) {
+		controlTile("tinySlider", "device.level", "slider", height: 2, width: 2, inactiveLabel: false) {
+			state "level", action:"switch level.setLevel"
+		}
+
+		controlTile("mediumSlider", "device.level", "slider", height: 2, width: 4, inactiveLabel: false) {
+			state "level", action:"switch level.setLevel"
+		}
+
+		controlTile("largeSlider", "device.level", "slider", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+			state "level", action:"switch level.setLevel"
+		}
+
+		controlTile("rangeSlider", "device.rangedLevel", "slider", height: 2, width: 4, range: "(20..80)") {
+			state "level", action:"setRangedLevel"
+		}
+
+		valueTile("rangeValue", "device.rangedLevel", height: 2, width: 2) {
+			state "default", label:'${currentValue}'
+		}
+
+		controlTile("rangeSliderConstrained", "device.rangedLevel", "slider", height: 2, width: 4, range: "(40..60)") {
+			state "level", action:"setRangedLevel"
+		}
+
+		main("rangeValue")
+		details([
+			"tinySlider", "mediumSlider",
+			"largeSlider",
+			"rangeSlider", "rangeValue",
+			"rangeSliderConstrained"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "level", value: 63)
+	sendEvent(name: "rangedLevel", value: 47)
+}
+
+def parse(String description) {
+}
+
+def setLevel(value) {
+	log.debug "setting level to $value"
+	sendEvent(name:"level", value:value)
+}
+
+def setRangedLevel(value) {
+	log.debug "setting ranged level to $value"
+	sendEvent(name:"rangedLevel", value:value)
+}

devicetypes/smartthings/tile-ux/tile-basic-standard.src/tile-basic-standard.groovy

@@ -0,0 +1,109 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "standardDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Switch"
+	}
+
+	tiles(scale: 2) {
+		// standard tile with actions
+		standardTile("actionRings", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label: '${currentValue}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+			state "on", label: '${currentValue}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+		}
+
+		// standard flat tile with actions
+		standardTile("actionFlat", "device.switch", width: 2, height: 2, canChangeIcon: true, decoration: "flat") {
+			state "off", label: '${currentValue}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+			state "on", label: '${currentValue}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+		}
+
+		// standard flat tile without actions
+		standardTile("noActionFlat", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label: '${currentValue}',icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+			state "on", label: '${currentValue}', icon: "st.switches.switch.on", backgroundColor: "#79b821"
+		}
+
+		// standard flat tile with only a label
+		standardTile("flatLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
+			state "default", label: 'On Action', action: "switch.on", backgroundColor: "#ffffff"
+		}
+
+		// standard flat tile with icon and label
+		standardTile("flatIconLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
+			state "default", label: 'Off Action', action: "switch.off", icon:"st.switches.switch.off", backgroundColor: "#ffffff"
+		}
+
+		// standard flat tile with only icon (Refreh text is IN the icon file)
+		standardTile("flatIcon", "device.switch", width: 2, height: 2, decoration: "flat") {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		// standard with defaultState = true
+		standardTile("flatDefaultState", "null", width: 2, height: 2, decoration: "flat") {
+			state "off", label: 'Fail!', icon: "st.switches.switch.off"
+			state "on", label: 'Pass!', icon: "st.switches.switch.on", defaultState: true
+		}
+
+		// standard with implicit defaultState based on order (0 index is selected)
+		standardTile("flatImplicitDefaultState1", "null", width: 2, height: 2, decoration: "flat") {
+			state "on", label: 'Pass!', icon: "st.switches.switch.on"
+			state "off", label: 'Fail!', icon: "st.switches.switch.off"
+		}
+
+		// standard with implicit defaultState based on state.name == default
+		standardTile("flatImplicitDefaultState2", "null", width: 2, height: 2, decoration: "flat") {
+			state "off", label: 'Fail!', icon: "st.switches.switch.off"
+			state "default", label: 'Pass!', icon: "st.switches.switch.on"
+		}
+
+		// utility tiles to fill the spaces
+		standardTile("empty2x2", "null", width: 2, height: 2, decoration: "flat") {
+			state "default", label:''
+		}
+		standardTile("empty4x2", "null", width: 4, height: 2, decoration: "flat") {
+			state "default", label:''
+		}
+
+		main("standard1")
+		details([
+			"actionRings", "actionFlat", "noActionFlat",
+
+			"flatLabel", "flatIconLabel", "flatIcon",
+
+			"flatDefaultState", "flatImplicitDefaultState1", "flatImplicitDefaultState2",
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "switch", value: "off")
+}
+
+def parse(String description) {
+}
+
+def on() {
+	log.debug "on()"
+	sendEvent(name: "switch", value: "on")
+}
+
+def off() {
+	log.debug "off()"
+	sendEvent(name: "switch", value: "off")
+}

devicetypes/smartthings/tile-ux/tile-basic-value.src/tile-basic-value.groovy

@@ -0,0 +1,96 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "valueDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Sensor"
+	}
+
+	tiles(scale: 2) {
+		valueTile("text", "device.text", width: 2, height: 2) {
+			state "default", label:'${currentValue}'
+		}
+
+		valueTile("longText", "device.longText", width: 2, height: 2) {
+			state "default", label:'${currentValue}'
+		}
+
+		valueTile("integer", "device.integer", width: 2, height: 2) {
+			state "default", label:'${currentValue}'
+		}
+
+		valueTile("integerFloat", "device.integerFloat", width: 2, height: 2) {
+			state "default", label:'${currentValue}'
+		}
+
+		valueTile("pi", "device.pi", width: 2, height: 2) {
+			state "default", label:'${currentValue}'
+		}
+
+		valueTile("floatAsText", "device.floatAsText", width: 2, height: 2) {
+			state "default", label:'${currentValue}'
+		}
+
+		valueTile("bgColor", "device.integer", width: 2, height: 2) {
+			state "default", label:'${currentValue}', backgroundColor: "#e86d13"
+		}
+
+		valueTile("bgColorRange", "device.integer", width: 2, height: 2) {
+			state "default", label:'${currentValue}', backgroundColors: [
+				[value: 10, color: "#ff0000"],
+				[value: 90, color: "#0000ff"]
+			]
+		}
+
+		valueTile("bgColorRangeSingleItem", "device.integer", width: 2, height: 2) {
+			state "default", label:'${currentValue}', backgroundColors: [
+				[value: 10, color: "#333333"]
+			]
+		}
+
+		valueTile("bgColorRangeConflict", "device.integer", width: 2, height: 2) {
+			state "default", label:'${currentValue}', backgroundColors: [
+				[value: 10, color: "#990000"],
+				[value: 10, color: "#000099"]
+			]
+		}
+
+		valueTile("noValue", "device.nada", width: 2, height: 2) {
+			state "default", label:'${currentValue}'
+		}
+
+		main("text")
+		details([
+			"text", "longText", "integer", 
+            "integerFloat", "pi", "floatAsText",
+            "bgColor", "bgColorRange", "bgColorRangeSingleItem",
+            "bgColorRangeConflict", "noValue"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "text", value: "Test")
+	sendEvent(name: "longText", value: "The Longer The Text, The Better The Test")
+	sendEvent(name: "integer", value: 47)
+	sendEvent(name: "integerFloat", value: 47.0)
+	sendEvent(name: "pi", value: 3.14159)
+	sendEvent(name: "floatAsText", value: "3.14159")
+}
+
+def parse(String description) {
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy

@@ -0,0 +1,118 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "genericDeviceTile", namespace: "smartthings/tile-ux", author: "SmartThings") {
+		capability "Actuator"
+		capability "Switch"
+		capability "Switch Level"
+
+		command "levelUp"
+		command "levelDown"
+		command "randomizeLevel"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"basicTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+		}
+		multiAttributeTile(name:"sliderTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute("device.level", key: "SECONDARY_CONTROL") {
+				attributeState "default", icon: 'st.Weather.weather1', action:"randomizeLevel"
+			}
+			tileAttribute("device.level", key: "SLIDER_CONTROL") {
+				attributeState "default", action:"switch level.setLevel"
+			}
+		}
+		multiAttributeTile(name:"valueTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.level", key: "PRIMARY_CONTROL") {
+				attributeState "default", label:'${currentValue}', backgroundColors:[
+					[value: 0, color: "#ff0000"],
+					[value: 20, color: "#ffff00"],
+					[value: 40, color: "#00ff00"],
+					[value: 60, color: "#00ffff"],
+					[value: 80, color: "#0000ff"],
+					[value: 100, color: "#ff00ff"]
+				]
+			}
+			tileAttribute("device.switch", key: "SECONDARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'…', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'…', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute("device.level", key: "VALUE_CONTROL") {
+				attributeState "VALUE_UP", action: "levelUp"
+				attributeState "VALUE_DOWN", action: "levelDown"
+			}
+		}
+
+		main(["basicTile"])
+		details(["basicTile", "sliderTile", "valueTile"])
+	}
+}
+
+def installed() {
+
+}
+
+def parse() {
+	// This is a simulated device. No incoming data to parse.
+}
+
+def on() {
+	log.debug "turningOn"
+	sendEvent(name: "switch", value: "on")
+}
+
+def off() {
+	log.debug "turningOff"
+	sendEvent(name: "switch", value: "off")
+}
+
+def setLevel(percent) {
+	log.debug "setLevel: ${percent}, this"
+	sendEvent(name: "level", value: percent)
+}
+
+def randomizeLevel() {
+	def level = Math.round(Math.random() * 100)
+	setLevel(level)
+}
+
+def levelUp() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level < 100) {
+		level = level + 1
+	}
+	setLevel(level)
+}
+
+def levelDown() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level > 0) {
+		level = level - 1
+	}
+	setLevel(level)
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-lighting.src/tile-multiattribute-lighting.groovy

@@ -0,0 +1,211 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "lightingDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Color Control"
+		capability "Power Meter"
+		capability "Switch"
+		capability "Refresh"
+		capability "Sensor"
+
+		command "setAdjustedColor"
+		command "reset"
+		command "refresh"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'Power level: ${currentValue}W', icon: "st.Appliances.appliances17"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setAdjustedColor"
+			}
+		}
+
+		multiAttributeTile(name:"switchNoPower", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setAdjustedColor"
+			}
+		}
+
+		multiAttributeTile(name:"switchNoSlider", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'The power level is currently: ${currentValue}W', icon: "st.Appliances.appliances17"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setAdjustedColor"
+			}
+		}
+
+		multiAttributeTile(name:"switchNoSliderOrColor", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'The light is currently consuming this amount of power: ${currentValue}W', icon: "st.Appliances.appliances17"
+			}
+		}
+
+		valueTile("color", "device.color", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "color", label: '${currentValue}'
+		}
+
+		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main(["switch"])
+		details(["switch", "switchNoPower", "switchNoSlider", "switchNoSliderOrColor", "color", "refresh", "reset"])
+	}
+}
+
+// parse events into attributes
+def parse(description) {
+	log.debug "parse() - $description"
+	def results = []
+	def map = description
+	if (description instanceof String)  {
+		log.debug "Hue Bulb stringToMap - ${map}"
+		map = stringToMap(description)
+	}
+	if (map?.name && map?.value) {
+		results << createEvent(name: "${map?.name}", value: "${map?.value}")
+	}
+	results
+}
+
+// handle commands
+def on() {
+	//log.trace parent.on(this)
+	sendEvent(name: "switch", value: "on")
+}
+
+def off() {
+	//log.trace parent.off(this)
+	sendEvent(name: "switch", value: "off")
+}
+
+def nextLevel() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level <= 100) {
+		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
+	}
+	else {
+		level = 25
+	}
+	setLevel(level)
+}
+
+def setLevel(percent) {
+	log.debug "setLevel: ${percent}, this"
+	sendEvent(name: "level", value: percent)
+	def power = Math.round(percent / 1.175) * 0.1
+	sendEvent(name: "power", value: power)
+}
+
+def setSaturation(percent) {
+	log.debug "setSaturation: ${percent}, $this"
+	sendEvent(name: "saturation", value: percent)
+}
+
+def setHue(percent) {
+	log.debug "setHue: ${percent}, $this"
+	sendEvent(name: "hue", value: percent)
+}
+
+def setColor(value) {
+	log.debug "setColor: ${value}, $this"
+	if (value.hue) { sendEvent(name: "hue", value: value.hue)}
+	if (value.saturation) { sendEvent(name: "saturation", value: value.saturation)}
+	if (value.hex) { sendEvent(name: "color", value: value.hex)}
+	if (value.level) { sendEvent(name: "level", value: value.level)}
+	if (value.switch) { sendEvent(name: "switch", value: value.switch)}
+}
+
+def reset() {
+	log.debug "Executing 'reset'"
+	setAdjustedColor([level:100, hex:"#90C638", saturation:56, hue:23])
+	//parent.poll()
+}
+
+def setAdjustedColor(value) {
+	if (value) {
+		log.trace "setAdjustedColor: ${value}"
+		def adjusted = value + [:]
+		adjusted.hue = adjustOutgoingHue(value.hue)
+		// Needed because color picker always sends 100
+		adjusted.level = null
+		setColor(adjusted)
+	}
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+	//parent.manualRefresh()
+}
+
+def adjustOutgoingHue(percent) {
+	def adjusted = percent
+	if (percent > 31) {
+		if (percent < 63.0) {
+			adjusted = percent + (7 * (percent -30 ) / 32)
+		}
+		else if (percent < 73.0) {
+			adjusted = 69 + (5 * (percent - 62) / 10)
+		}
+		else {
+			adjusted = percent + (2 * (100 - percent) / 28)
+		}
+	}
+	log.info "percent: $percent, adjusted: $adjusted"
+	adjusted
+}
+

devicetypes/smartthings/tile-ux/tile-multiattribute-mediaplayer.src/tile-multiattribute-mediaplayer.groovy

@@ -0,0 +1,122 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "mediaPlayerDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Actuator"
+		capability "Switch"
+		capability "Refresh"
+		capability "Sensor"
+		capability "Music Player"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name: "mediaMulti", type:"mediaPlayer", width:6, height:4) {
+			tileAttribute("device.status", key: "PRIMARY_CONTROL") {
+				attributeState("paused", label:"Paused",)
+				attributeState("playing", label:"Playing")
+				attributeState("stopped", label:"Stopped")
+			}
+			tileAttribute("device.status", key: "MEDIA_STATUS") {
+				attributeState("paused", label:"Paused", action:"music Player.play", nextState: "playing")
+				attributeState("playing", label:"Playing", action:"music Player.pause", nextState: "paused")
+				attributeState("stopped", label:"Stopped", action:"music Player.play", nextState: "playing")
+			}
+			tileAttribute("device.status", key: "PREVIOUS_TRACK") {
+				attributeState("default", action:"music Player.previousTrack")
+			}
+			tileAttribute("device.status", key: "NEXT_TRACK") {
+				attributeState("default", action:"music Player.nextTrack")
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState("level", action:"music Player.setLevel")
+			}
+			tileAttribute ("device.mute", key: "MEDIA_MUTED") {
+				attributeState("unmuted", action:"music Player.mute", nextState: "muted")
+				attributeState("muted", action:"music Player.unmute", nextState: "unmuted")
+			}
+			tileAttribute("device.trackDescription", key: "MARQUEE") {
+				attributeState("default", label:"${currentValue}")
+			}
+		}
+
+		main "mediaMulti"
+		details(["mediaMulti"])
+	}
+}
+
+def installed() {
+	state.tracks = [
+		"Gangnam Style (강남스타일)\nPSY\nPsy 6 (Six Rules), Part 1",
+		"Careless Whisper\nWham!\nMake It Big",
+		"Never Gonna Give You Up\nRick Astley\nWhenever You Need Somebody",
+		"Shake It Off\nTaylor Swift\n1989",
+		"Ironic\nAlanis Morissette\nJagged Little Pill",
+		"Hotline Bling\nDrake\nHotline Bling - Single"
+	]
+	state.currentTrack = 0
+
+	sendEvent(name: "level", value: 72)
+	sendEvent(name: "mute", value: "unmuted")
+	sendEvent(name: "status", value: "stopped")
+}
+
+def parse(description) {
+	// No parsing will happen with this simulated device.
+}
+
+def play() {
+	sendEvent(name: "status", value: "playing")
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def pause() {
+	sendEvent(name: "status", value: "paused")
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def stop() {
+	sendEvent(name: "status", value: "stopped")
+}
+
+def previousTrack() {
+	state.currentTrack = state.currentTrack - 1
+	if (state.currentTrack < 0)
+		state.currentTrack = state.tracks.size()-1
+
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def nextTrack() {
+	state.currentTrack = state.currentTrack + 1
+	if (state.currentTrack == state.tracks.size())
+		state.currentTrack = 0
+
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def mute() {
+	sendEvent(name: "mute", value: "muted")
+}
+
+def unmute() {
+	sendEvent(name: "mute", value: "unmuted")
+}
+
+def setLevel(level) {
+	sendEvent(name: "level", value: level)
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-thermostat.src/tile-multiattribute-thermostat.groovy

@@ -0,0 +1,341 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "thermostatDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Thermostat"
+		capability "Relative Humidity Measurement"
+
+		command "tempUp"
+		command "tempDown"
+		command "heatUp"
+		command "heatDown"
+		command "coolUp"
+		command "coolDown"
+		command "setTemperature", ["number"]
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"thermostatFull", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("VALUE_UP", action: "tempUp")
+				attributeState("VALUE_DOWN", action: "tempDown")
+			}
+			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
+				attributeState("default", label:'${currentValue}%', unit:"%")
+			}
+			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+				attributeState("idle", backgroundColor:"#44b621")
+				attributeState("heating", backgroundColor:"#ffa81e")
+				attributeState("cooling", backgroundColor:"#269bd2")
+			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+				attributeState("off", label:'${name}')
+				attributeState("heat", label:'${name}')
+				attributeState("cool", label:'${name}')
+				attributeState("auto", label:'${name}')
+			}
+			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+		}
+		multiAttributeTile(name:"thermostatNoHumidity", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("VALUE_UP", action: "tempUp")
+				attributeState("VALUE_DOWN", action: "tempDown")
+			}
+			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+				attributeState("idle", backgroundColor:"#44b621")
+				attributeState("heating", backgroundColor:"#ffa81e")
+				attributeState("cooling", backgroundColor:"#269bd2")
+			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+				attributeState("off", label:'${name}')
+				attributeState("heat", label:'${name}')
+				attributeState("cool", label:'${name}')
+				attributeState("auto", label:'${name}')
+			}
+			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+		}
+		multiAttributeTile(name:"thermostatBasic", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("default", label:'${currentValue}', unit:"dF",
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				])
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("VALUE_UP", action: "tempUp")
+				attributeState("VALUE_DOWN", action: "tempDown")
+			}
+		}
+
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}', unit:"dF",
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+			)
+		}
+		standardTile("tempDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'down', action:"tempDown"
+		}
+		standardTile("tempUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'up', action:"tempUp"
+		}
+
+		valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "heat", label:'${currentValue} heat', unit: "F", backgroundColor:"#ffffff"
+		}
+		standardTile("heatDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'down', action:"heatDown"
+		}
+		standardTile("heatUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'up', action:"heatUp"
+		}
+
+		valueTile("coolingSetpoint", "device.coolingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "cool", label:'${currentValue} cool', unit:"F", backgroundColor:"#ffffff"
+		}
+		standardTile("coolDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'down', action:"coolDown"
+		}
+		standardTile("coolUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'up', action:"coolUp"
+		}
+
+		standardTile("mode", "device.thermostatMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "off", label:'${name}', action:"thermostat.heat", backgroundColor:"#ffffff"
+			state "heat", label:'${name}', action:"thermostat.cool", backgroundColor:"#ffa81e"
+			state "cool", label:'${name}', action:"thermostat.auto", backgroundColor:"#269bd2"
+			state "auto", label:'${name}', action:"thermostat.off", backgroundColor:"#79b821"
+		}
+		standardTile("fanMode", "device.thermostatFanMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "fanAuto", label:'${name}', action:"thermostat.fanOn", backgroundColor:"#ffffff"
+			state "fanOn", label:'${name}', action:"thermostat.fanCirculate", backgroundColor:"#ffffff"
+			state "fanCirculate", label:'${name}', action:"thermostat.fanAuto", backgroundColor:"#ffffff"
+		}
+		standardTile("operatingState", "device.thermostatOperatingState", width: 2, height: 2) {
+			state "idle", label:'${name}', backgroundColor:"#ffffff"
+			state "heating", label:'${name}', backgroundColor:"#ffa81e"
+			state "cooling", label:'${name}', backgroundColor:"#269bd2"
+		}
+
+
+		main("thermostatFull")
+		details([
+			"thermostatFull", "thermostatNoHumidity", "thermostatBasic",
+			"temperature","tempDown","tempUp",
+			"mode", "fanMode", "operatingState",
+			"heatingSetpoint", "heatDown", "heatUp",
+			"coolingSetpoint", "coolDown", "coolUp"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "temperature", value: 72, unit: "F")
+	sendEvent(name: "heatingSetpoint", value: 70, unit: "F")
+	sendEvent(name: "thermostatSetpoint", value: 70, unit: "F")
+	sendEvent(name: "coolingSetpoint", value: 76, unit: "F")
+	sendEvent(name: "thermostatMode", value: "off")
+	sendEvent(name: "thermostatFanMode", value: "fanAuto")
+	sendEvent(name: "thermostatOperatingState", value: "idle")
+	sendEvent(name: "humidity", value: 53, unit: "%")
+}
+
+def parse(String description) {
+}
+
+def evaluate(temp, heatingSetpoint, coolingSetpoint) {
+	log.debug "evaluate($temp, $heatingSetpoint, $coolingSetpoint"
+	def threshold = 1.0
+	def current = device.currentValue("thermostatOperatingState")
+	def mode = device.currentValue("thermostatMode")
+
+	def heating = false
+	def cooling = false
+	def idle = false
+	if (mode in ["heat","emergency heat","auto"]) {
+		if (heatingSetpoint - temp >= threshold) {
+			heating = true
+			sendEvent(name: "thermostatOperatingState", value: "heating")
+		}
+		else if (temp - heatingSetpoint >= threshold) {
+			idle = true
+		}
+		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
+	}
+	if (mode in ["cool","auto"]) {
+		if (temp - coolingSetpoint >= threshold) {
+			cooling = true
+			sendEvent(name: "thermostatOperatingState", value: "cooling")
+		}
+		else if (coolingSetpoint - temp >= threshold && !heating) {
+			idle = true
+		}
+		sendEvent(name: "thermostatSetpoint", value: coolingSetpoint)
+	}
+	else {
+		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
+	}
+
+	if (mode == "off") {
+		idle = true
+	}
+
+	if (idle && !heating && !cooling) {
+		sendEvent(name: "thermostatOperatingState", value: "idle")
+	}
+}
+
+def setHeatingSetpoint(Double degreesF) {
+	log.debug "setHeatingSetpoint($degreesF)"
+	sendEvent(name: "heatingSetpoint", value: degreesF)
+	evaluate(device.currentValue("temperature"), degreesF, device.currentValue("coolingSetpoint"))
+}
+
+def setCoolingSetpoint(Double degreesF) {
+	log.debug "setCoolingSetpoint($degreesF)"
+	sendEvent(name: "coolingSetpoint", value: degreesF)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), degreesF)
+}
+
+def setThermostatMode(String value) {
+	sendEvent(name: "thermostatMode", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def setThermostatFanMode(String value) {
+	sendEvent(name: "thermostatFanMode", value: value)
+}
+
+def off() {
+	sendEvent(name: "thermostatMode", value: "off")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def heat() {
+	sendEvent(name: "thermostatMode", value: "heat")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def auto() {
+	sendEvent(name: "thermostatMode", value: "auto")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def emergencyHeat() {
+	sendEvent(name: "thermostatMode", value: "emergency heat")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def cool() {
+	sendEvent(name: "thermostatMode", value: "cool")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def fanOn() {
+	sendEvent(name: "thermostatFanMode", value: "fanOn")
+}
+
+def fanAuto() {
+	sendEvent(name: "thermostatFanMode", value: "fanAuto")
+}
+
+def fanCirculate() {
+	sendEvent(name: "thermostatFanMode", value: "fanCirculate")
+}
+
+def poll() {
+	null
+}
+
+def tempUp() {
+	def ts = device.currentState("temperature")
+	def value = ts ? ts.integerValue + 1 : 72
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def tempDown() {
+	def ts = device.currentState("temperature")
+	def value = ts ? ts.integerValue - 1 : 72
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def setTemperature(value) {
+	def ts = device.currentState("temperature")
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def heatUp() {
+	def ts = device.currentState("heatingSetpoint")
+	def value = ts ? ts.integerValue + 1 : 68
+	sendEvent(name:"heatingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
+}
+
+def heatDown() {
+	def ts = device.currentState("heatingSetpoint")
+	def value = ts ? ts.integerValue - 1 : 68
+	sendEvent(name:"heatingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
+}
+
+
+def coolUp() {
+	def ts = device.currentState("coolingSetpoint")
+	def value = ts ? ts.integerValue + 1 : 76
+	sendEvent(name:"coolingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
+}
+
+def coolDown() {
+	def ts = device.currentState("coolingSetpoint")
+	def value = ts ? ts.integerValue - 1 : 76
+	sendEvent(name:"coolingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-videoplayer.src/tile-multiattribute-videoplayer.groovy

@@ -0,0 +1,169 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *	  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "videoPlayerDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Configuration"
+		capability "Video Camera"
+		capability "Video Capture"
+		capability "Refresh"
+		capability "Switch"
+
+		// custom commands
+		command "start"
+		command "stop"
+		command "setProfileHD"
+		command "setProfileSDH"
+		command "setProfileSDL"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name: "videoPlayer", type: "videoPlayer", width: 6, height: 4) {
+			tileAttribute("device.switch", key: "CAMERA_STATUS") {
+				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", action: "switch.off", backgroundColor: "#79b821", defaultState: true)
+				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", action: "switch.on", backgroundColor: "#ffffff")
+				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
+				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", action: "refresh.refresh", backgroundColor: "#F22000")
+			}
+
+			tileAttribute("device.errorMessage", key: "CAMERA_ERROR_MESSAGE") {
+				attributeState("errorMessage", label: "", value: "", defaultState: true)
+			}
+
+			tileAttribute("device.camera", key: "PRIMARY_CONTROL") {
+				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", backgroundColor: "#79b821", defaultState: true)
+				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", backgroundColor: "#ffffff")
+				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
+				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", backgroundColor: "#F22000")
+			}
+
+			tileAttribute("device.startLive", key: "START_LIVE") {
+				attributeState("live", action: "start", defaultState: true)
+			}
+
+			tileAttribute("device.stream", key: "STREAM_URL") {
+				attributeState("activeURL", defaultState: true)
+			}
+
+			tileAttribute("device.profile", key: "STREAM_QUALITY") {
+				attributeState("1", label: "720p", action: "setProfileHD", defaultState: true)
+				attributeState("2", label: "h360p", action: "setProfileSDH", defaultState: true)
+				attributeState("3", label: "l360p", action: "setProfileSDL", defaultState: true)
+			}
+
+			tileAttribute("device.betaLogo", key: "BETA_LOGO") {
+				attributeState("betaLogo", label: "", value: "", defaultState: true)
+			}
+		}
+		
+		multiAttributeTile(name: "videoPlayerMin", type: "videoPlayer", width: 6, height: 4) {
+			tileAttribute("device.switch", key: "CAMERA_STATUS") {
+				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", action: "switch.off", backgroundColor: "#79b821", defaultState: true)
+				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", action: "switch.on", backgroundColor: "#ffffff")
+				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
+				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", action: "refresh.refresh", backgroundColor: "#F22000")
+			}
+
+			tileAttribute("device.errorMessage", key: "CAMERA_ERROR_MESSAGE") {
+				attributeState("errorMessage", label: "", value: "", defaultState: true)
+			}
+
+			tileAttribute("device.camera", key: "PRIMARY_CONTROL") {
+				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", backgroundColor: "#79b821", defaultState: true)
+				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", backgroundColor: "#ffffff")
+				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
+				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", backgroundColor: "#F22000")
+			}
+
+			tileAttribute("device.startLive", key: "START_LIVE") {
+				attributeState("live", action: "start", defaultState: true)
+			}
+
+			tileAttribute("device.stream", key: "STREAM_URL") {
+				attributeState("activeURL", defaultState: true)
+			}
+		}
+
+		main("videoPlayer")
+		details([
+			"videoPlayer", "videoPlayerMin"
+		])
+	}
+}
+
+def installed() {
+}
+
+def parse(String description) {
+}
+
+def refresh() {
+	log.trace "refresh()"
+	// no-op
+}
+
+def on() {
+	log.trace "on()"
+	// no-op
+}
+
+def off() {
+	log.trace "off()"
+	// no-op
+}
+
+def setProfile(profile) {
+	log.trace "setProfile(): ${profile}"
+	sendEvent(name: "profile", value: profile, displayed: false)
+}
+
+def setProfileHD() {
+	setProfile(1)
+}
+
+def setProfileSDH() {
+	setProfile(2)
+}
+
+def setProfileSDL() {
+	setProfile(3)
+}
+
+def start() {
+	log.trace "start()"
+	def dataLiveVideo = [
+		OutHomeURL  : "https://devimages.apple.com.edgekey.net/streaming/examples/bipbop_4x3/bipbop_4x3_variant.m3u8",
+		InHomeURL   : "https://devimages.apple.com.edgekey.net/streaming/examples/bipbop_4x3/bipbop_4x3_variant.m3u8",
+		ThumbnailURL: "http://cdn.device-icons.smartthings.com/camera/dlink-indoor@2x.png",
+		cookie      : [key: "key", value: "value"]
+	]
+
+	def event = [
+		name           : "stream",
+		value          : groovy.json.JsonOutput.toJson(dataLiveVideo).toString(),
+		data		   : groovy.json.JsonOutput.toJson(dataLiveVideo),
+		descriptionText: "Starting the livestream",
+		eventType      : "VIDEO",
+		displayed      : false,
+		isStateChange  : true
+	]
+	sendEvent(event)
+}
+
+def stop() {
+	log.trace "stop()"
+}

devicetypes/smartthings/wattvision.src/wattvision.groovy

@@ -33,7 +33,7 @@ metadata {
 			state "power", label: '${currentValue} W'
 		}
 
-		htmlTile(name: "powerContent", attribute: "powerContent", type: "HTML", whitelist: "www.wattvision.com" , url: '${currentValue}', width: 3, height: 2)
+		htmlTile(name: "powerContent", attribute: "powerContent", type: "HTML", whitelist: ["www.wattvision.com"] , url: '${currentValue}', width: 3, height: 2)
 
 		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
 			state "default", label: '', action: "refresh.refresh", icon: "st.secondary.refresh"

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -0,0 +1,194 @@
+/**
+ *  Iris Smart Fob
+ *
+ *  Copyright 2015 Mitch Pond
+ *	Presence code adapted from SmartThings Arrival Sensor HA device type
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
+		capability "Battery"
+		capability "Button"
+        capability "Configuration"
+		capability "Presence Sensor"
+		capability "Sensor"
+        
+		//fingerprint endpointId: "01", profileId: "0104", inClusters: "0000,0001,0003,0007,0020,0B05", outClusters: "0003,0006,0019", model:"3450-L", manufacturer: "CentraLite"
+	}
+    
+    preferences{
+	    input ("holdTime", "number", title: "Minimum time in seconds for a press to count as \"held\"",
+    		defaultValue: 3, displayDuringSetup: false)
+        input "checkInterval", "enum", title: "Presence timeout (minutes)",
+            defaultValue:"2", options: ["2", "3", "5"], displayDuringSetup: false
+        input "logging", "bool", title: "Enable debug logging",
+            defaultValue: false, displayDuringSetup: false
+    }
+
+	tiles(scale: 2) {
+    	standardTile("presence", "device.presence", width: 4, height: 4, canChangeBackground: true) {
+            state "present", label: "Present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
+            state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
+        }
+    	standardTile("button", "device.button", decoration: "flat", width: 2, height: 2) {
+        	state "default", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
+        }
+		valueTile("battery", "device.battery", decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main (["presence"])
+		details(["presence","button","battery"])
+	}
+}
+
+def parse(String description) {
+    def descMap = zigbee.parseDescriptionAsMap(description)
+    logIt descMap
+    state.lastCheckin = now()
+    logIt "lastCheckin = ${state.lastCheckin}"
+    handlePresenceEvent(true)
+    
+	def results = []
+    if (description?.startsWith('catchall:'))
+		results = parseCatchAllMessage(descMap)
+	else if (description?.startsWith('read attr -'))
+		results = parseReportAttributeMessage(descMap)
+    else logIt(descMap, "trace")
+        
+	return results;
+}
+
+def updated() {
+	startTimer()
+    configure()
+}
+
+def configure(){
+	logIt "Configuring Smart Fob..."
+	[
+	"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
+    "zdo bind 0x${device.deviceNetworkId} 2 1 6 {${device.zigbeeId}} {}", "delay 200",
+    "zdo bind 0x${device.deviceNetworkId} 3 1 6 {${device.zigbeeId}} {}", "delay 200",
+    "zdo bind 0x${device.deviceNetworkId} 4 1 6 {${device.zigbeeId}} {}", "delay 200",
+    "zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 200"
+    ] +
+    zigbee.configureReporting(0x0001,0x0020,0x20,20,20,0x01)
+}
+
+def parseCatchAllMessage(descMap) {
+    if (descMap?.clusterId == "0006" && descMap?.command == "01") 		//button pressed
+    	handleButtonPress(descMap.sourceEndpoint as int)
+    else if (descMap?.clusterId == "0006" && descMap?.command == "00") 	//button released
+    	handleButtonRelease(descMap.sourceEndpoint as int)
+    else logIt("Parse: Unhandled message: ${descMap}","trace")
+}
+
+def parseReportAttributeMessage(descMap) {
+	if (descMap?.cluster == "0001" && descMap?.attrId == "0020") createBatteryEvent(getBatteryLevel(descMap.value))
+    else logIt descMap
+}
+
+private createBatteryEvent(percent) {
+	logIt "Battery level at " + percent
+	return createEvent([name: "battery", value: percent])
+}
+
+//this method determines if a press should count as a push or a hold and returns the relevant event type
+private handleButtonRelease(button) {
+	logIt "lastPress state variable: ${state.lastPress}"
+    def sequenceError = {logIt("Uh oh...missed a message? Dropping this event.", "error"); state.lastPress = null; return []}	
+    
+    if (!state.lastPress) return sequenceError()
+	else if (state.lastPress.button != button) return sequenceError()
+    
+    def currentTime = now()
+    def startOfPress = state.lastPress?.time
+    def timeDif = currentTime - startOfPress
+    def holdTimeMillisec = (settings.holdTime?:3).toInteger() * 1000
+    
+    state.lastPress = null	//we're done with this. clear it to make error conditions easier to catch
+    
+    if (timeDif < 0) 
+    //likely a message sequence issue or dropped packet. Drop this press and wait for another.
+    	return sequenceError()
+    else if (timeDif < holdTimeMillisec)
+    	return createButtonEvent(button,"pushed")
+    else 
+    	return createButtonEvent(button,"held")
+}
+
+private handleButtonPress(button) {
+	state.lastPress = [button: button, time: now()]
+}
+
+private createButtonEvent(button,action) {
+	logIt "Button ${button} ${action}"
+	return createEvent([
+    	name: "button",
+        value: action, 
+        data:[buttonNumber: button], 
+        descriptionText: "${device.displayName} button ${button} was ${action}",
+        isStateChange: true, 
+        displayed: true])
+}
+
+private getBatteryLevel(rawValue) {
+	def intValue = Integer.parseInt(rawValue,16)
+	def min = 2.1
+    def max = 3.0
+    def vBatt = intValue / 10
+    return ((vBatt - min) / (max - min) * 100) as int
+}
+
+private handlePresenceEvent(present) {
+    def wasPresent = device.currentState("presence")?.value == "present"
+    if (!wasPresent && present) {
+        logIt "Sensor is present"
+        startTimer()
+    } else if (!present) {
+        logIt "Sensor is not present"
+        stopTimer()
+    }
+    def linkText = getLinkText(device)
+    def eventMap = [
+        name: "presence",
+        value: present ? "present" : "not present",
+        linkText: linkText,
+        descriptionText: "${linkText} has ${present ? 'arrived' : 'left'}",
+    ]
+    logIt "Creating presence event: ${eventMap}"
+    sendEvent(eventMap)
+}
+
+private startTimer() {
+    logIt "Scheduling periodic timer"
+    schedule("0 * * * * ?", checkPresenceCallback)
+}
+
+private stopTimer() {
+    logIt "Stopping periodic timer"
+    unschedule()
+}
+
+def checkPresenceCallback() {
+    def timeSinceLastCheckin = (now() - state.lastCheckin) / 1000
+    def theCheckInterval = (checkInterval ? checkInterval as int : 2) * 60
+    logIt "Sensor checked in ${timeSinceLastCheckin} seconds ago"
+    if (timeSinceLastCheckin >= theCheckInterval) {
+        handlePresenceEvent(false)
+    }
+}
+
+// ****** Utility functions ******
+
+private logIt(str, logLevel = 'debug') {if (settings.logging) log."$logLevel"(str) }

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -60,7 +60,7 @@ def bridgeDiscovery(params=[:])
         app.updateSetting("selectedHue", "")
     }
 
-	subscribe(location, null, locationHandler, [filterEvents:false])
+	ssdpSubscribe()
 
 	//bridge discovery request every 15 //25 seconds
 	if((bridgeRefreshCount % 5) == 0) {
@@ -152,6 +152,10 @@ private discoverBridges() {
 	sendHubCommand(new physicalgraph.device.HubAction("lan discovery urn:schemas-upnp-org:device:basic:1", physicalgraph.device.Protocol.LAN))
 }
 
+void ssdpSubscribe() {
+	subscribe(location, "ssdpTerm.urn:schemas-upnp-org:device:basic:1", ssdpBridgeHandler)
+}
+
 private sendDeveloperReq() {
 	def token = app.id
     def host = getBridgeIP()
@@ -161,7 +165,7 @@ private sendDeveloperReq() {
 		headers: [
 			HOST: host
 		],
-		body: [devicetype: "$token-0"]], "${selectedHue}"))
+		body: [devicetype: "$token-0"]], "${selectedHue}", [callback: "usernameHandler"]))
 }
 
 private discoverHueBulbs() {
@@ -171,7 +175,7 @@ private discoverHueBulbs() {
 		path: "/api/${state.username}/lights",
 		headers: [
 			HOST: host
-		]], "${selectedHue}"))
+		]], "${selectedHue}", [callback: "lightsHandler"]))
 }
 
 private verifyHueBridge(String deviceNetworkId, String host) {
@@ -181,7 +185,7 @@ private verifyHueBridge(String deviceNetworkId, String host) {
 		path: "/description.xml",
 		headers: [
 			HOST: host
-		]], deviceNetworkId))
+		]], deviceNetworkId, [callback: "bridgeDescriptionHandler"]))
 }
 
 private verifyHueBridges() {
@@ -293,8 +297,9 @@ def bulbListHandler(hub, data = "") {
         }
     }
     def bridge = null
-	if (selectedHue)
-        bridge = getChildDevice(selectedHue)
+	if (selectedHue) {
+		bridge = getChildDevice(selectedHue)
+	}
     bridge.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
     msg = "${bulbs.size()} bulbs found. ${bulbs}"
 	return msg
@@ -382,8 +387,9 @@ def addBridge() {
                     	def oldDNI = it.deviceNetworkId
                         log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
                         it.setDeviceNetworkId("${newDNI}")
-                        if (oldDNI == selectedHue)
-                        	app.updateSetting("selectedHue", newDNI)
+						if (oldDNI == selectedHue) {
+							app.updateSetting("selectedHue", newDNI)
+						}
                         newbridge = false
                     }
                 }
@@ -412,6 +418,111 @@ def addBridge() {
 	}
 }
 
+def ssdpBridgeHandler(evt) {
+	def description = evt.description
+	log.trace "Location: $description"
+
+	def hub = evt?.hubId
+	def parsedEvent = parseLanMessage(description)
+	parsedEvent << ["hub":hub]
+
+	def bridges = getHueBridges()
+	log.trace bridges.toString()
+	if (!(bridges."${parsedEvent.ssdpUSN.toString()}")) {
+		//bridge does not exist
+		log.trace "Adding bridge ${parsedEvent.ssdpUSN}"
+		bridges << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
+	} else {
+		// update the values
+		def ip = convertHexToIP(parsedEvent.networkAddress)
+		def port = convertHexToInt(parsedEvent.deviceAddress)
+		def host = ip + ":" + port
+		log.debug "Device ($parsedEvent.mac) was already found in state with ip = $host."
+		def dstate = bridges."${parsedEvent.ssdpUSN.toString()}"
+		def dni = "${parsedEvent.mac}"
+		def d = getChildDevice(dni)
+		def networkAddress = null
+		if (!d) {
+			childDevices.each {
+				if (it.getDeviceDataByName("mac")) {
+					def newDNI = "${it.getDeviceDataByName("mac")}"
+					if (newDNI != it.deviceNetworkId) {
+						def oldDNI = it.deviceNetworkId
+						log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
+						it.setDeviceNetworkId("${newDNI}")
+						if (oldDNI == selectedHue) {
+							app.updateSetting("selectedHue", newDNI)
+						}
+						doDeviceSync()
+					}
+				}
+			}
+		} else {
+			if (d.getDeviceDataByName("networkAddress")) {
+				networkAddress = d.getDeviceDataByName("networkAddress")
+			} else {
+				networkAddress = d.latestState('networkAddress').stringValue
+			}
+			log.trace "Host: $host - $networkAddress"
+			if (host != networkAddress) {
+				log.debug "Device's port or ip changed for device $d..."
+				dstate.ip = ip
+				dstate.port = port
+				dstate.name = "Philips hue ($ip)"
+				d.sendEvent(name:"networkAddress", value: host)
+				d.updateDataValue("networkAddress", host)
+			}
+		}
+	}
+}
+
+void bridgeDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
+	log.trace "description.xml response (application/xml)"
+	def body = hubResponse.xml
+	if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
+		def bridges = getHueBridges()
+		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
+		if (bridge) {
+			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
+		} else {
+			log.error "/description.xml returned a bridge that didn't exist"
+		}
+	}
+}
+
+void lightsHandler(physicalgraph.device.HubResponse hubResponse) {
+	if (isValidSource(hubResponse.mac)) {
+		def body = hubResponse.json
+		if (!body?.state?.on) { //check if first time poll made it here by mistake
+			def bulbs = getHueBulbs()
+			log.debug "Adding bulbs to state!"
+			body.each { k, v ->
+				bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub: hubResponse.hubId]
+			}
+		}
+	}
+}
+
+void usernameHandler(physicalgraph.device.HubResponse hubResponse) {
+	if (isValidSource(hubResponse.mac)) {
+		def body = hubResponse.json
+		if (body.success != null) {
+			if (body.success[0] != null) {
+				if (body.success[0].username)
+					state.username = body.success[0].username
+			}
+		} else if (body.error != null) {
+			//TODO: handle retries...
+			log.error "ERROR: application/json ${body.error}"
+		}
+	}
+}
+
+/**
+ * @deprecated This has been replaced by the combination of {@link #ssdpBridgeHandler()}, {@link #bridgeDescriptionHandler()},
+ * {@link #lightsHandler()}, and {@link #usernameHandler()}. After a pending event subscription migration, it can be removed.
+ */
+@Deprecated
 def locationHandler(evt) {
 	def description = evt.description
     log.trace "Location: $description"
@@ -447,17 +558,19 @@ def locationHandler(evt) {
                             def oldDNI = it.deviceNetworkId
                             log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
                             it.setDeviceNetworkId("${newDNI}")
-                            if (oldDNI == selectedHue)
-                                app.updateSetting("selectedHue", newDNI)
+							if (oldDNI == selectedHue) {
+								app.updateSetting("selectedHue", newDNI)
+							}
                             doDeviceSync()
                         }
                     }
                 }
 			} else {
-            	if (d.getDeviceDataByName("networkAddress"))
-                	networkAddress = d.getDeviceDataByName("networkAddress")
-            	else
-                	networkAddress = d.latestState('networkAddress').stringValue
+				if (d.getDeviceDataByName("networkAddress")) {
+					networkAddress = d.getDeviceDataByName("networkAddress")
+				} else {
+					networkAddress = d.latestState('networkAddress').stringValue
+				}
                 log.trace "Host: $host - $networkAddress"
                 if(host != networkAddress) {
                     log.debug "Device's port or ip changed for device $d..."
@@ -490,8 +603,9 @@ def locationHandler(evt) {
 			def body = new groovy.json.JsonSlurper().parseText(parsedEvent.body)
 			if (body.success != null) {
 				if (body.success[0] != null) {
-					if (body.success[0].username)
+					if (body.success[0].username) {
 						state.username = body.success[0].username
+					}
 				}
 			} else if (body.error != null) {
 				//TODO: handle retries...
@@ -516,11 +630,7 @@ def doDeviceSync(){
 	log.trace "Doing Hue Device Sync!"
 	convertBulbListToMap()
 	poll()
-    try {
-		subscribe(location, null, locationHandler, [filterEvents:false])
-    } catch (all) {
-    	log.trace "Subscription already exist"
- 	}
+	ssdpSubscribe()
 	discoverBridges()
 }
 
@@ -747,15 +857,11 @@ private getId(childDevice) {
 private poll() {
 	def host = getBridgeIP()
 	def uri = "/api/${state.username}/lights/"
-    try {
-		sendHubCommand(new physicalgraph.device.HubAction("""GET ${uri} HTTP/1.1
+	log.debug "GET: $host$uri"
+	sendHubCommand(new physicalgraph.device.HubAction("""GET ${uri} HTTP/1.1
 HOST: ${host}
 
 """, physicalgraph.device.Protocol.LAN, selectedHue))
-	} catch (all) {
-        log.warn "Parsing Body failed - trying again..."
-        doDeviceSync()
-    }
 }
 
 private put(path, body) {

smartapps/smartthings/notify-me-when.src/i18n/messages.properties

@@ -23,9 +23,9 @@
 '''Minimum time between messages (optional, defaults to every message)'''.ko=메시지 전송 간격 설정
 '''If outside the US please make sure to enter the proper country code'''.ko=미국 이외 국가에 거주한다면 국가 코드와 함께 입력하여 주세요.
 '''Water Sensor Wet'''.ko=누수가 감지되었을 때
-'''{{ triggerEvent.linkText }} has arrived at the {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}에 도착했습니다
-'''{{ triggerEvent.linkText }} has arrived at {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}에 도착했습니다
-'''{{ triggerEvent.linkText }} has left the {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}을(를) 떠났습니다
-'''{{ triggerEvent.linkText }} has left {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}을(를) 떠났습니다
+'''{{ triggerEvent.linkText }} has arrived at the {{ location.name }}'''.ko={{ location.name }}에 {{ triggerEvent.linkText }} 귀가
+'''{{ triggerEvent.linkText }} has arrived at {{ location.name }}'''.ko={{ location.name }}에 {{ triggerEvent.linkText }} 귀가
+'''{{ triggerEvent.linkText }} has left the {{ location.name }}'''.ko={{ location.name }}에서 {{ triggerEvent.linkText }} 외출
+'''{{ triggerEvent.linkText }} has left {{ location.name }}'''.ko={{ location.name }}에서 {{ triggerEvent.linkText }} 외출
 '''Assign a name'''.ko=이름 설정
 '''Choose Modes'''.ko=상태 선택

smartapps/smartthings/tile-ux/device-tile-controller.src/device-tile-controller.groovy

@@ -0,0 +1,107 @@
+/**
+ *  Device Tile Controller
+ *
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Device Tile Controller",
+    namespace: "smartthings/tile-ux",
+    author: "SmartThings",
+    description: "A controller SmartApp to install virtual devices into your location in order to simulate various native Device Tiles.",
+    category: "SmartThings Internal",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    singleInstance: true)
+
+
+preferences {
+    // landing page
+    page(name: "defaultPage")
+}
+
+def defaultPage() {
+    dynamicPage(name: "defaultPage", install: true, uninstall: true) {
+        section {
+            paragraph "Select on Unselect the devices that you want to install"
+        }
+        section(title: "Multi Attribute Tile Types") {
+            input(type: "bool", name: "genericDeviceTile", title: "generic", description: "A device that showcases the various use of generic multi-attribute-tiles.", defaultValue: "false")
+            input(type: "bool", name: "lightingDeviceTile", title: "lighting", description: "A device that showcases the various use of lighting multi-attribute-tiles.", defaultValue: "false")
+            input(type: "bool", name: "thermostatDeviceTile", title: "thermostat", description: "A device that showcases the various use of thermostat multi-attribute-tiles.", defaultValue: "true")
+            input(type: "bool", name: "mediaPlayerDeviceTile", title: "media player", description: "A device that showcases the various use of mediaPlayer multi-attribute-tiles.", defaultValue: "false")
+            input(type: "bool", name: "videoPlayerDeviceTile", title: "video player", description: "A device that showcases the various use of videoPlayer multi-attribute-tiles.", defaultValue: "false")
+        }
+        section(title: "Device Tile Types") {
+            input(type: "bool", name: "standardDeviceTile", title: "standard device tiles", description: "A device that showcases the various use of standard device tiles.", defaultValue: "false")
+            input(type: "bool", name: "valueDeviceTile", title: "value device tiles", description: "A device that showcases the various use of value device tiles.", defaultValue: "false")
+            input(type: "bool", name: "presenceDeviceTile", title: "presence device tiles", description: "A device that showcases the various use of color control device tile.", defaultValue: "false")
+        }
+        section(title: "Other Tile Types") {
+            input(type: "bool", name: "carouselDeviceTile", title: "image carousel", description: "A device that showcases the various use of carousel device tile.", defaultValue: "false")
+            input(type: "bool", name: "sliderDeviceTile", title: "slider", description: "A device that showcases the various use of slider device tile.", defaultValue: "false")
+            input(type: "bool", name: "colorWheelDeviceTile", title: "color wheel", description: "A device that showcases the various use of color wheel device tile.", defaultValue: "false")
+        }
+    }
+}
+
+def installed() {
+    log.debug "Installed with settings: ${settings}"
+}
+
+def uninstalled() {
+    getChildDevices().each {
+        deleteChildDevice(it.deviceNetworkId)
+    }
+}
+
+def updated() {
+    log.debug "Updated with settings: ${settings}"
+    unsubscribe()
+    initializeDevices()
+}
+
+def initializeDevices() {
+    settings.each { key, value ->
+        log.debug "$key : $value"
+        def existingDevice = getChildDevices().find { it.name == key }
+        log.debug "$existingDevice"
+        if (existingDevice && !value) {
+            deleteChildDevice(existingDevice.deviceNetworkId)
+        } else if (!existingDevice && value) {
+            String dni = UUID.randomUUID()
+            log.debug "$dni"
+            addChildDevice(app.namespace, key, dni, null, [
+                label: labelMap()[key] ?: key,
+                completedSetup: true
+            ])
+        }
+    }
+}
+
+// Map the name of the Device to a proper Label
+def labelMap() {
+    [
+        genericDeviceTile: "Tile Multiattribute Generic",
+        lightingDeviceTile: "Tile Multiattribute Lighting",
+        thermostatDeviceTile: "Tile Multiattribute Thermostat",
+        mediaPlayerDeviceTile: "Tile Multiattribute Media Player",
+        videoPlayerDeviceTile: "Tile Multiattribute Video Player",
+        standardDeviceTile: "Tile Device Standard",
+        valueDeviceTile: "Tile Device Value",
+        presenceDeviceTile: "Tile Device Presence",
+        carouselDeviceTile: "Tile Device Carousel",
+        sliderDeviceTile: "Tile Device Slider",
+        colorWheelDeviceTile: "Tile Device Color Wheel"
+    ]
+}

smartapps/tslagle13/vacation-lighting-director.src/vacation-lighting-director.groovy

@@ -40,6 +40,7 @@ preferences {
     page name:"pageSetup"
     page name:"Setup"
     page name:"Settings"
+    page name: "timeIntervalInput"
 
 }
 
@@ -185,7 +186,8 @@ def Settings() {
     }   
 }
 
-page(name: "timeIntervalInput", title: "Only during a certain time", refreshAfterSelection:true) {
+def timeIntervalInput() {
+	dynamicPage(name: "timeIntervalInput") {
 		section {
 			input "startTimeType", "enum", title: "Starting at", options: [["time": "A specific time"], ["sunrise": "Sunrise"], ["sunset": "Sunset"]], defaultValue: "time", submitOnChange: true
 			if (startTimeType in ["sunrise","sunset"]) {
@@ -204,9 +206,10 @@ page(name: "timeIntervalInput", title: "Only during a certain time", refreshAfte
 				input "ending", "time", title: "End time", required: false
 			}
 		}
-        
+	}
 }
 
+
 def installed() {
 initialize()
 }