MSA-1399: SmartThings drive that works with the LANNouncer Android app (free on the Google Play store) to work as a TTS (text to speech) device, alarm, siren, strobe, security camera and image retriever to Dropbox from security cameras.

Rolling down staging hotfix to master

build.gradle

@@ -9,7 +9,7 @@ apply plugin: 'smartthings-slack'
 
 buildscript {
     dependencies {
-        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.7"
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.8"
     }
     repositories {
         mavenLocal()

devicetypes/keybounce/lannouncer-alerter.src/lannouncer-alerter.groovy

@@ -0,0 +1,350 @@
+/**
+ *  LANnouncer Alerter (Formerly LANdroid - but Google didn't like that much.)
+ *
+ *  Requires the LANnouncer android app; https://play.google.com/store/apps/details?id=com.keybounce.lannouncer
+ *  See http://www.keybounce.com/LANdroidHowTo/LANdroid.html for full downloads and instructions.
+ *  SmartThings thread: https://community.smartthings.com/t/android-as-a-speech-alarm-device-released/30282/12
+ *  
+ * Note: Only Siren and Strobe from the U.I. or Alarm capabilities default to continuous.
+ *
+ *  Version 1.24 16 July 2016
+ * 
+ *
+ *  Copyright 2015-2016 Tony McNamara
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ * To Do: Add string return to Image Capture attribute
+ *
+ */
+
+metadata {
+    definition (name: "LANnouncer Alerter", namespace: "KeyBounce", author: "Tony McNamara") {
+        capability "Alarm"
+        capability "Speech Synthesis"
+        capability "Notification"
+        capability "Tone"
+        capability "Image Capture"
+        attribute  "LANdroidSMS","string"
+        /* Per http://docs.smartthings.com/en/latest/device-type-developers-guide/overview.html#actuator-and-sensor */
+        capability "Sensor"
+        capability "Actuator"
+
+        // Custom Commands
+        /** Retrieve image, formatted for SmartThings, from camera by name. */
+        command "chime"
+        command "doorbell"
+        command "ipCamSequence", ["number"]
+        command "retrieveAndWait", ["string"]
+        command "retrieveFirstAndWait"
+        command "retrieveSecondAndWait"
+    }
+    preferences {
+        input("DeviceLocalLan", "string", title:"Android IP Address", description:"Please enter your tablet's I.P. address", defaultValue:"" , required: false, displayDuringSetup: true)
+        input("DevicePort", "string", title:"Android Port", description:"Port the Android device listens on", defaultValue:"1035", required: false, displayDuringSetup: true)
+        input("ReplyOnEmpty", "bool", title:"Say Nothing", description:"When no speech is found, announce LANdroid?  (Needed for the speech and notify tiles to work)", defaultValue: true, displayDuringSetup: true)
+        input("AlarmContinuous", "bool", title:"Continuous Alarm (vs 10 sec.)", description: "When on, the alarm will sound until Stop is issued.", defaultValue: false, displayDuringSetup: true)
+    }
+
+    simulator {
+        // reply messages
+        ["strobe","siren","both","off"].each 
+            {
+                reply "$it": "alarm:$it"
+            }
+    }
+
+    tiles {
+        standardTile("alarm", "device.alarm", width: 2, height: 2) {
+            state "off", label:'off', action:'alarm.both', icon:"st.alarm.alarm.alarm", backgroundColor:"#ffffff"
+            state "strobe", label:'strobe!', action:'alarm.off', icon:"st.Lighting.light11", backgroundColor:"#e86d13"
+            state "siren", label:'siren!', action:'alarm.off', icon:"st.alarm.alarm.alarm", backgroundColor:"#e86d13"
+            state "both", label:'alarm!', action:'alarm.off', icon:"st.alarm.alarm.alarm", backgroundColor:"#e86d13"
+        }
+        standardTile("strobe", "device.alarm", inactiveLabel: false, decoration: "flat") {
+            state "default", label:'', action:"alarm.strobe", icon:"st.secondary.strobe"
+        }
+        
+        standardTile("siren", "device.alarm", inactiveLabel: false, decoration: "flat") {
+            state "default", label:'', action:"alarm.siren", icon:"st.secondary.siren"
+        }
+        standardTile("off", "device.alarm", inactiveLabel: false, decoration: "flat") {
+            state "default", label:'Off', action:"alarm.off", icon:"st.quirky.spotter.quirky-spotter-sound-off"
+        }       
+        
+        /* Apparently can't show image attributes on tiles. */
+        standardTile("take", "device.image", width: 1, height: 1, canChangeIcon: false, canChangeBackground: false) 
+        {
+            state "take", label: "Take", action: "Image Capture.take", icon: "st.camera.camera", backgroundColor: "#FFFFFF", nextState:"taking"
+            state "taking", label:'Taking', action: "", icon: "st.camera.take-photo", backgroundColor: "#53a7c0"
+            state "image", label: "Take", action: "Image Capture.take", icon: "st.camera.camera", backgroundColor: "#FFFFFF", nextState:"taking"
+        }
+
+        
+        standardTile("speak", "device.speech", inactiveLabel: false, decoration: "flat") 
+        {
+            state "default", label:'Speak', action:"Speech Synthesis.speak", icon:"st.Electronics.electronics13"
+        }
+        standardTile("toast", "device.notification", inactiveLabel: false, decoration: "flat") {
+            state "default", label:'Notify', action:"notification.deviceNotification", icon:"st.Kids.kids1"
+        }
+        standardTile("beep", "device.tone", inactiveLabel: false, decoration: "flat") {
+            state "default", label:'Tone', action:"tone.beep", icon:"st.Entertainment.entertainment2"
+        }
+        carouselTile("cameraDetails", "device.image", width: 3, height: 2) { }
+
+        main (["alarm", "take"]);
+        details(["alarm","strobe","siren","off","speak", "take","toast","beep", "cameraDetails"]);
+    }
+}
+
+/** Generally matches TTSServer/app/build.gradle */
+String getVersion() {return "24 built July 2016";}
+
+
+// handle commands
+def off() {
+    log.debug "Executing 'off'"
+    sendEvent(name:"alarm", value:"off")
+    def command="&ALARM=STOP&FLASH=STOP&"+getDoneString();
+    sendCommands(command)
+}
+
+def strobe() {
+    log.debug "Executing 'strobe'"
+    // TODO: handle 'strobe' command
+    sendEvent(name:"alarm", value:"strobe")
+    def command="&FLASH=STROBE&"+getDoneString()
+    if (AlarmContinuous)
+    {
+        command="&FLASH=CONTINUOUS&"+getDoneString()
+    }
+    sendCommands(command)
+}
+
+def siren() {
+    log.debug "Executing 'siren'"
+    sendEvent(name:"alarm", value:"siren")
+    def command="&ALARM=SIREN&"+getDoneString()
+    if (AlarmContinuous)
+    {
+        command="&ALARM=SIREN:CONTINUOUS&"+getDoneString()
+    }
+    sendCommands(command)
+}
+
+def beep() {
+    log.debug "Executing 'beep'"
+    def command="&ALARM=CHIME&"+getDoneString()
+    sendCommands(command)
+}
+
+def both() {
+    log.debug "Executing 'both'"
+    sendEvent(name:"alarm", value:"both")
+    def command="&ALARM=ON&FLASH=ON&"+getDoneString()
+    if (AlarmContinuous)
+    {
+        command="&ALARM=SIREN:CONTINUOUS&FLASH=CONTINUOUS&"+getDoneString()
+    }
+    sendCommands(command)
+}
+
+
+def speak(toSay) {
+    log.debug "Executing 'speak'"
+    if (!toSay?.trim()) {
+        if (ReplyOnEmpty) {
+            toSay = "LANnouncer Version ${version}"
+        }
+    }
+
+    if (toSay?.trim()) {
+        def command="&SPEAK="+toSay+"&"+getDoneString()
+        sendCommands(command)
+    }
+}
+
+def deviceNotification(toToast) {
+    log.debug "Executing notification with "+toToast
+    if (!toToast?.trim()) {
+        if (ReplyOnEmpty) {
+            toToast = "LANnouncer Version ${version}";
+        }
+    }
+    if (toToast?.trim()) {
+        def command="&TOAST="+toToast+"&"+getDoneString()
+        sendCommands(command)
+    }
+}    
+
+def chime() {
+    log.debug "Executing 'chime'"
+    // TODO: handle 'siren' command
+    def command="&ALARM=CHIME&"+getDoneString()
+    sendCommands(command)
+}
+
+def doorbell() {
+    log.debug "Executing 'doorbell'"
+    // TODO: handle 'siren' command
+    def command="&ALARM=DOORBELL&"+getDoneString()
+    sendCommands(command)
+}
+
+def ipCamSequence(cameraNumber) {
+    if (cameraNumber == 1) {
+        def command="&RETRIEVESEQ=FIRST&"+getDoneString()
+        sendIPCommand(command, true)
+
+    } else {
+    def command="&RETRIEVESEQ=SECOND&"+getDoneString()
+    sendIPCommand(command, true)
+    }
+}
+
+
+def retrieveFirstAndWait() {
+    retrieveAndWait("FIRST");
+}
+def retrieveSecondAndWait() {
+    retrieveAndWait("SECOND");
+}
+def retrieveAndWait(cameraName) {
+    log.info("Requesting image from camera ${cameraName}");
+    def command="&RETRIEVE="+cameraName+"&STSHRINK=TRUE&"+getDoneString()
+    sendIPCommand(command, true)
+}
+
+
+def take() {
+    // This won't result in received file. Can't handle large or binaries in hub.
+    log.debug "Executing 'take'"
+    def command="&PHOTO=BACK&STSHRINK=TRUE&"+getDoneString()
+    sendIPCommand(command, true)
+}
+
+/* Send to IP and to SMS as appropriate */
+private sendCommands(command) {
+    log.info "Command request: "+command
+    sendSMSCommand(command)
+    sendIPCommand(command)
+}
+
+
+private sendIPCommand(commandString, sendToS3 = false) {
+    log.info "Sending command "+ commandString+" to "+DeviceLocalLan+":"+DevicePort
+    if (DeviceLocalLan?.trim()) {
+        def hosthex = convertIPtoHex(DeviceLocalLan)
+        def porthex = convertPortToHex(DevicePort)
+        device.deviceNetworkId = "$hosthex:$porthex"
+
+        def headers = [:] 
+        headers.put("HOST", "$DeviceLocalLan:$DevicePort")
+
+        def method = "GET"
+
+        def hubAction = new physicalgraph.device.HubAction(
+            method: method,
+            path: "/"+commandString,
+            headers: headers
+            );
+        if (sendToS3 == true)
+        {
+            hubAction.options = [outputMsgToS3:true];
+        }
+        log.debug hubActionw
+        hubAction;
+    }
+}
+
+private sendSMSCommand(commandString) {
+    def preface = "+@TTSSMS@+"
+    def smsValue = preface+"&"+commandString
+    state.lastsmscommand = smsValue
+    sendEvent(name: "LANdroidSMS", value: smsValue, isStateChange: true)
+    /*
+    if (SMSPhone?.trim()) {
+        sendSmsMessage(SMSPhone, preface+"&"+commandString)
+    }
+    */
+}
+
+private String getDoneString() {
+    return "@DONE@"
+}
+
+def parse(String description) {
+    log.debug "Parsing '${description}'"
+    def map = parseLanMessage(description);
+    log.debug "As LAN: " + map;
+    if ((map.headers) && (map.headers.'Content-Type' != null) && (map.headers.'Content-Type'.contains("image/jpeg")) )
+    {   //  Store the file
+      if(map.body) 
+      {
+            storeImage(getPictureName(), map.body);
+      }
+    }
+/* 'index:0F, mac:0073E023A13A, ip:C0A80114, port:040B, requestId:f9036fb2-9637-40b8-b2c5-71ba5a09fd3e, bucket:smartthings-device-conn-temp, key:fc8e3dfd-5035-40a2-8adc-a312926f9034' */
+
+    else if (map.bucket && map.key)
+    { //    S3 pointer; retrieve image from it to store.
+        try {
+            def s3ObjectContent; // Needed for scope of try-catch
+            def imageBytes = getS3Object(map.bucket, map.key + ".jpg")
+
+            if(imageBytes)
+            {
+                log.info ("Got image bytes; saving them.")
+                s3ObjectContent = imageBytes.getObjectContent()
+                def bytes = new ByteArrayInputStream(s3ObjectContent.bytes)
+                storeImage(getPictureName(), bytes)
+            }
+        }
+        catch(Exception e) 
+        {
+            log.error e
+        }
+        finally {
+            //explicitly close the stream
+            if (s3ObjectContent) { s3ObjectContent.close() }
+        }        
+    }
+}
+
+
+// Image Capture handling
+/* Note that images are stored in https://graph.api.smartthings.com/api/s3/smartthings-smartsense-camera/[IMAGE-ID4], 
+ * where [IMAGE-ID] is listed in the IDE under My Devices > [Camera] > Current States: Image. That page is updated as pictures are taken.
+ */
+
+
+private getPictureName() {
+    def pictureUuid = java.util.UUID.randomUUID().toString().replaceAll('-', '')
+    log.debug pictureUuid
+    def picName = device.deviceNetworkId.replaceAll(':', '') + "_$pictureUuid" + ".jpg"
+    return picName
+}
+
+
+private String convertIPtoHex(ipAddress) { 
+    String hex = ipAddress.tokenize( '.' ).collect {  String.format( '%02X', it.toInteger() ) }.join()
+    log.debug "IP address entered is $ipAddress and the converted hex code is $hex"
+    return hex
+
+}
+
+private String convertPortToHex(port) {
+    String hexport = port.toString().format( '%04X', port.toInteger() )
+    log.debug hexport
+    return hexport
+}
+
+

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,6 +22,7 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -326,6 +327,9 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
+	// allow device user configured or default 16 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2* timeOptionValueMap[reportInterval] ?: 2*8*60, displayed: false)
+
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
 	def request = []

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,6 +20,9 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
+
+		command "configureAfterSecure"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 	}
@@ -245,6 +248,8 @@ def configureAfterSecure() {
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
+	// allow device 16 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2*8*60, displayed: false)
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -180,6 +181,9 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
+	// allow device 10 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2*5*60, displayed: false)
+
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
 		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2).format(),

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -12,16 +12,6 @@
  *
  */
  
- /*
- *  Purpose: Arrival Sensor HA DTH File
- *
- *  Filename: Arrival-Sensor-HA.src/Arrival-Sensor-HA.groovy
- *
- *  Change History:
- *  1. 20160115 TW - Update/Edit to support i18n translations
- *  2. 20160121 TW - Update to V4 battery calcs, added pref's page title translations
- */
- 
 metadata {
     definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
         capability "Tone"

devicetypes/smartthings/arrival-sensor-ha.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,15 +11,6 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: Arrival Sensor HA i18n Translation File
-#
-# Filename: Arrival-Sensor-HA.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160115 TW Initial release with informal Korean translation.
-#	2. 20160121 TW Added def preference section titles.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Give your device a name'''.ko=기기 이름 설정

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -13,12 +13,13 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
 metadata {
     definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Configuration"
+        capability "Polling"
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
@@ -88,6 +89,10 @@ def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
+def poll() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh()
+}
+
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -138,6 +138,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	log.debug "productTypeId:    ${cmd.productTypeId}"
 	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
 	updateDataValue("MSR", msr)
+	updateDataValue("manufacturer", cmd.manufacturerName)
 	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 

devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy

@@ -21,6 +21,7 @@ metadata {
         attribute "tamper", "enum", ["detected", "clear"]
         attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
+        fingerprint mfr:"010F", prod:"0C02", model:"1002"
     }
     simulator {
         //battery

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -1,7 +1,7 @@
 /**
  *  GE Link Bulb
  *
- *  Copyright 2014 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -53,6 +53,8 @@ metadata {
         capability "Polling"
 
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE_Appliances", model: "ZLL Light", deviceJoinName: "GE Link Bulb"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE", model: "SoftWhite", deviceJoinName: "GE Link Soft White Bulb"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE", model: "Daylight", deviceJoinName: "GE Link Daylight Bulb"
     }
 
 	// UI tile definitions

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -37,9 +37,6 @@ metadata {
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
             }
-            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-	            attributeState "level", label: 'Level ${currentValue}%'
-			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -38,9 +38,6 @@ metadata {
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
             }
-            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-	            attributeState "level", label: 'Level ${currentValue}%'
-			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -33,9 +33,6 @@ metadata {
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
               attributeState "level", action:"switch level.setLevel", range:"(0..100)"
             }
-            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-	            attributeState "level", label: 'Level ${currentValue}%'
-			}
         }
 
         controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -0,0 +1,110 @@
+/**
+ *  Hue White Ambiance Bulb
+ *
+ *  Philips Hue Type "Color Temperature Light"
+ *
+ *  Author: SmartThings
+ */
+
+// for the UI
+metadata {
+    // Automatically generated. Make future change here.
+    definition (name: "Hue White Ambiance Bulb", namespace: "smartthings", author: "SmartThings") {
+        capability "Switch Level"
+        capability "Actuator"
+        capability "Color Temperature"
+        capability "Switch"
+        capability "Refresh"
+
+        command "refresh"
+    }
+
+    simulator {
+        // TODO: define status and reply messages here
+    }
+
+    tiles (scale: 2){
+        multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+        standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["rich-control"])
+        details(["rich-control", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+// parse events into attributes
+def parse(description) {
+    log.debug "parse() - $description"
+    def results = []
+
+    def map = description
+    if (description instanceof String)  {
+        log.debug "Hue Ambience Bulb stringToMap - ${map}"
+        map = stringToMap(description)
+    }
+
+    if (map?.name && map?.value) {
+        results << createEvent(name: "${map?.name}", value: "${map?.value}")
+    }
+    results
+}
+
+// handle commands
+void on() {
+    log.trace parent.on(this)
+    sendEvent(name: "switch", value: "on")
+}
+
+void off() {
+    log.trace parent.off(this)
+    sendEvent(name: "switch", value: "off")
+}
+
+void setLevel(percent) {
+    log.debug "Executing 'setLevel'"
+    if (percent != null && percent >= 0 && percent <= 100) {
+        parent.setLevel(this, percent)
+        sendEvent(name: "level", value: percent)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "$percent is not 0-100"
+    }
+}
+
+void setColorTemperature(value) {
+    if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "Invalid color temperature"
+    }
+}
+
+void refresh() {
+    log.debug "Executing 'refresh'"
+    parent.manualRefresh()
+}
+

devicetypes/smartthings/mobile-presence.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
@@ -12,15 +11,6 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
 #  License for the specific language governing permissions and limitations 
 #  under the License.
-#==============================================================================
-# Purpose: Mobile Presence i18n Translation File
-#
-# Filename: mobile-presence.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160205 TW Initial release with informal Korean translation.
-#	2. 20160224 TW Updated with formal Korean translation.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Give your device a name'''.ko=기기 이름 설정

devicetypes/smartthings/mobile-presence.src/mobile-presence.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,14 +12,6 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
  *  License for the specific language governing permissions and limitations 
  *  under the License.
-===============================================================================
- *  Purpose: Mobile Presence DTH File
- *
- *  Filename: mobile-presence.src/mobile-presence.groovy
- *
- *  Change History:
- *  1. 20160205 TW - Update/Edit to support i18n translations
-===============================================================================
  */
  
 metadata {

devicetypes/smartthings/osram-lightify-led-tunable-white-60w.src/osram-lightify-led-tunable-white-60w.groovy

@@ -19,11 +19,6 @@ metadata {
         capability "Sensor"
 
         attribute "colorName", "string"
-
-        // indicates that device keeps track of heartbeat (in state.heartbeat)
-        attribute "heartbeat", "string"
-        
-
     }
 
     // simulator metadata
@@ -75,9 +70,6 @@ metadata {
 def parse(String description) {
     //log.trace description
 
-    // save heartbeat (i.e. last time we got a message from device)
-    state.heartbeat = Calendar.getInstance().getTimeInMillis()
-
     if (description?.startsWith("catchall:")) {
         if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
         {
@@ -132,7 +124,6 @@ def off() {
 }
 
 def refresh() {
-    sendEvent(name: "heartbeat", value: "alive", displayed:false)
     [
             "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
             "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",

devicetypes/smartthings/smartpower-outlet.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,14 +11,6 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: SmartPower Outlet i18n Translation File
-#
-# Filename: SmartPower-Outlet.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160116 TW Initial release with informal Korean translation.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Give your device a name'''.ko=기기 이름 설정

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,27 +12,18 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
-===============================================================================
- *  Purpose: SmartPower Outlet DTH File
- *
- *  Filename: SmartPower-Outlet.src/SmartPower-Outlet.groovy
- *
- *  Change History:
- *  1. 20160117 TW - Update/Edit to support i18n translations
-===============================================================================
  */
+
 metadata {
 	// Automatically generated. Make future change here.
-	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings", category: "C1") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"
 		capability "Configuration"
 		capability "Refresh"
 		capability "Sensor"
-
-		// indicates that device keeps track of heartbeat (in state.heartbeat)
-		attribute "heartbeat", "string"
+		capability "Health Check"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
@@ -88,9 +78,6 @@ metadata {
 def parse(String description) {
 	log.debug "description is $description"
 
-	// save heartbeat (i.e. last time we got a message from device)
-	state.heartbeat = Calendar.getInstance().getTimeInMillis()
-
 	def finalResult = zigbee.getKnownDescription(description)
 
 	//TODO: Remove this after getKnownDescription can parse it automatically
@@ -131,11 +118,11 @@ def on() {
 }
 
 def refresh() {
-	sendEvent(name: "heartbeat", value: "alive", displayed:false)
 	zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 1200, displayed: false)
 	zigbee.onOffConfig() + powerConfig() + refresh()
 }
 

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,14 +11,6 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: SmartSense Moisture Sensor i18n Translation File
-#
-# Filename: SmartSense-Moisture-Sensor.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160116 TW Initial release with formal Korean translation.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Dry'''.ko=건조

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,24 +12,16 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
-===============================================================================
- *  Purpose: SmartSense Moisture Sensor DTH File
- *
- *  Filename: SmartSense-Moisture-Sensor.src/SmartSense-Moisture-Sensor.groovy
- *
- *  Change History:
- *  1. 20160116 TW - Update/Edit to support i18n translations
- *  2. 20160125 TW = Incorporated new battery mapping from TM
-===============================================================================
  */
 
 metadata {
-	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
+		capability "Health Check"
 
 		command "enrollResponse"
 
@@ -264,7 +255,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -320,6 +312,8 @@ def refresh() {
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [

devicetypes/smartthings/smartsense-motion-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -0,0 +1,30 @@
+# Smartsense Motion Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartThings Motion Sensor](https://shop.smartthings.com/#!/products/samsung-smartthings-motion-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health]($health)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Motion Sensor** - can detect motion
+* **Battery** - defines device uses a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C2 motion sensor that has 120min check-in interval
+
+
+
+
+
+

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,15 +11,6 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: SmartSense Motion Sensor i18n Translation File
-#
-# Filename: SmartSense-Motion-Sensor.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160116 TW Initial release with formal Korean translation.
-#	2. 20160224 TW Updated formal Korean translations from Mike Stoller.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''battery'''.ko=배터리

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,24 +12,16 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
-===============================================================================
- *  Purpose: SmartSense Motion Sensor DTH File
- *
- *  Filename: SmartSense-Motion-Sensor.src/SmartSense-Motion-Sensor.groovy
- *
- *  Change History:
- *  1. 20160116 TW - Update/Edit to support i18n translations
- *  2. 20160125 TW = Incorporated new battery mapping from TM
-===============================================================================
  */
 
 metadata {
-	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
 		capability "Temperature Measurement"
 		capability "Refresh"
+		capability "Health Check"
 
 		command "enrollResponse"
 
@@ -280,7 +271,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -332,6 +324,8 @@ def refresh() {
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -24,7 +24,7 @@ metadata {
         capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Sensor"
-        
+
         command "enrollResponse"
 
 	}
@@ -73,7 +73,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -87,10 +87,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
 	    map = parseIasMessage(description)
     }
- 
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -128,7 +128,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -141,7 +141,7 @@ private Map parseReportAttributeMessage(String description) {
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,11 +153,11 @@ private Map parseReportAttributeMessage(String description) {
     else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
     	def value = descMap.value.endsWith("01") ? "active" : "inactive"
     	resultMap = getMotionResult(value)
-    } 
- 
+    }
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -170,7 +170,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-    
+
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -240,7 +240,8 @@ private Map getBatteryResult(rawValue) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			result.value = Math.min(100, (int) pct * 100)
+			def roundedPct = Math.round(pct * 100)
+			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 	}

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,14 +11,6 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: SmartSense Multi Sensor i18n Translation File
-#
-# Filename: SmartSense-Multi-Sensor.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160117 TW Initial release with informal Korean translation.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Yes'''.ko=예

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,19 +12,10 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
-===============================================================================
- *  Purpose: SmartSense Multi Sensor DTH File
- *
- *  Filename: SmartSense-Multi-Sensor.src/SmartSense-Multi-Sensor.groovy
- *
- *  Change History:
- *  1. 20160117 TW - Update/Edit to support i18n translations
- *  2. 20160125 TW = Incorporated new battery mapping from TM
-===============================================================================
  */
 
 metadata {
-	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 
 		capability "Three Axis"
 		capability "Battery"
@@ -35,6 +25,7 @@ metadata {
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
+		capability "Health Check"
 
  		command "enrollResponse"
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
@@ -347,7 +338,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -412,76 +404,37 @@ def refresh() {
 
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		log.debug "Refreshing Values for manufacturer: SmartThings "
-		refreshCmds = refreshCmds + [
-			/* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
-				seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
-				Separating these out in a separate if-else because I do not want to touch Centralite part
-				as of now.
-			*/
-
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 0 0x20 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-		]
+		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
+            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
+            Separating these out in a separate if-else because I do not want to touch Centralite part
+            as of now.
+        */
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
 	} else {
-		refreshCmds = refreshCmds + [
-			/* sensitivity - default value (8) */
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 0 0x20 {02}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-		]
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
 	}
 
 	//Common refresh commands
-	refreshCmds = refreshCmds + [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global read 0xFC02 0x0010",
-		"send 0x${device.deviceNetworkId} 1 1","delay 400"
-	]
+	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
+			zigbee.readAttribute(0x0001, 0x0020) +
+			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
 
 	return refreshCmds + enrollResponse()
 }
 
 def configure() {
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+
 	log.debug "Configuring Reporting"
 
-	def configCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-		]
+	def configCmds = enrollResponse() +
+			zigbee.batteryConfig() +
+			zigbee.temperatureConfig() +
+			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
 
 	return configCmds + refresh()
 }

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -16,15 +16,16 @@
 //DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
 
  metadata {
- 	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings") {
+ 	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
  		capability "Battery"
  		capability "Configuration"
  		capability "Contact Sensor"
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
- 		command "enrollResponse"
+		capability "Health Check"
 
+		command "enrollResponse"
  	}
 
  	simulator {
@@ -233,7 +234,8 @@ def getTemperature(value) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			result.value = Math.min(100, (int) pct * 100)
+			def roundedPct = Math.round(pct * 100)
+			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 
@@ -299,6 +301,7 @@ def getTemperature(value) {
 	}
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -13,32 +13,33 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
 metadata {
-	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-        
+		capability "Health Check"
+
 		command "enrollResponse"
- 
- 
+
+
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
 	}
- 
+
 	simulator {
- 
+
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
- 
+
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
@@ -71,10 +72,10 @@ metadata {
 		details(["contact","temperature","battery","refresh"])
 	}
 }
- 
+
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -88,10 +89,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
- 
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -99,7 +100,7 @@ def parse(String description) {
     }
     return result
 }
- 
+
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -125,7 +126,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -135,14 +136,14 @@ private boolean shouldProcessMessage(cluster) {
 private int getHumidity(value) {
     return Math.round(Double.parseDouble(value))
 }
- 
+
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -151,10 +152,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
- 
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -167,7 +168,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-    
+
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -200,7 +201,7 @@ private Map parseIasMessage(String description) {
     }
     return resultMap
 }
- 
+
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -213,11 +214,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-    
+
     def result = [
     	name: 'battery'
     ]
-    
+
 	def volts = rawValue / 10
 	def descriptionText
     if (rawValue == 0 || rawValue == 255) {}
@@ -228,7 +229,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -273,6 +275,7 @@ def refresh() {
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -14,12 +14,13 @@
  *
  */
 metadata {
-	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Relative Humidity Measurement"
+		capability "Health Check"
 
 		fingerprint endpointId: "01", inClusters: "0001,0003,0020,0402,0B05,FC45", outClusters: "0019,0003"
 	}
@@ -204,7 +205,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -251,6 +253,7 @@ def refresh()
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [

devicetypes/smartthings/tile-ux/README.md

@@ -0,0 +1,42 @@
+# Device Tiles Examples and Reference
+
+This package contains examples of Device tiles, organized by tile type.
+
+## Purpose
+
+Each Device Handler shows example usages of a specific tile, and is meant to represent the variety of permutations that a tile can be configured.
+
+The various tiles can be used by QA to test tiles on all supported mobile devices, and by developers as a reference implementation.
+
+## Installation
+
+1. Self-publish the Device Handlers in this package.
+2. Self-publish the Device Tile Controller SmartApp. The SmartApp can be found [here](https://github.com/SmartThingsCommunity/SmartThingsPublic/blob/master/smartapps/smartthings/tile-ux/device-tile-controller.src/device-tile-controller.groovy).
+3. Install the SmartApp from the Marketplace, under "My Apps".
+4. Select the simulated devices you want to install and press "Done".
+
+The simulated devices can then be found in the "Things" view of "My Home" in the mobile app.
+You may wish to create a new room for these simulated devices for easy access.
+
+## Usage
+
+Each simulated device can be interacted with like other devices.
+You can use the mobile app to interact with the tiles to see how they look and behave.
+
+## Troubleshooting
+
+If you get an error when installing the simulated devices using the controller SmartApp, ensure that you have published all the Device Handlers for yourself.
+Also check live logging to see if there is a specific tile that is causing installation issues.
+
+## FAQ
+
+*Question: A tile isn't behaving as expected. What should I do?*
+
+QA should create a JIRA ticket for any issues or inconsistencies of tiles across devices.
+
+Developers may file a support ticket, and reference the specific tile and issue observed.
+
+*Question: I'd like to contribute an example tile usage that would be helpful for testing and reference purposes. Can I do that?*
+
+We recommend that you open an issue in the SmartThingsPublic repository describing the example tile and usage.
+That way we can discuss with you the proposed change, and then if appropriate you can create a PR associated to the issue.

devicetypes/smartthings/tile-ux/tile-basic-colorwheel.src/tile-basic-colorwheel.groovy

@@ -22,7 +22,7 @@ metadata {
 
 	tiles(scale: 2) {
 		valueTile("currentColor", "device.color") {
-			state "default", label: '${currentValue}'
+			state "color", label: '${currentValue}', defaultState: true
 		}
 
 		controlTile("rgbSelector", "device.color", "color", height: 6, width: 6, inactiveLabel: false) {
@@ -41,6 +41,13 @@ def parse(String description) {
 	log.debug "Parsing '${description}'"
 }
 
+def setColor(value) {
+	log.debug "setting color: $value"
+    if (value.hex) { sendEvent(name: "color", value: value.hex) }
+    if (value.hue) { sendEvent(name: "hue", value: value.hue) }
+    if (value.saturation) { sendEvent(name: "saturation", value: value.saturation) }
+}
+
 def setSaturation(percent) {
 	log.debug "Executing 'setSaturation'"
 	sendEvent(name: "saturation", value: percent)

devicetypes/smartthings/tile-ux/tile-basic-slider.src/tile-basic-slider.groovy

@@ -39,7 +39,7 @@ metadata {
 		}
 
 		valueTile("rangeValue", "device.rangedLevel", height: 2, width: 2) {
-			state "default", label:'${currentValue}'
+			state "range", label:'${currentValue}', defaultState: true
 		}
 
 		controlTile("rangeSliderConstrained", "device.rangedLevel", "slider", height: 2, width: 4, range: "(40..60)") {

devicetypes/smartthings/tile-ux/tile-basic-standard.src/tile-basic-standard.groovy

@@ -41,17 +41,17 @@ metadata {
 
 		// standard flat tile with only a label
 		standardTile("flatLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
-			state "default", label: 'On Action', action: "switch.on", backgroundColor: "#ffffff"
+			state "label", label: 'On Action', action: "switch.on", backgroundColor: "#ffffff", defaultState: true
 		}
 
 		// standard flat tile with icon and label
 		standardTile("flatIconLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
-			state "default", label: 'Off Action', action: "switch.off", icon:"st.switches.switch.off", backgroundColor: "#ffffff"
+			state "iconLabel", label: 'Off Action', action: "switch.off", icon:"st.switches.switch.off", backgroundColor: "#ffffff", defaultState: true
 		}
 
 		// standard flat tile with only icon (Refreh text is IN the icon file)
 		standardTile("flatIcon", "device.switch", width: 2, height: 2, decoration: "flat") {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+			state "icon", action:"refresh.refresh", icon:"st.secondary.refresh", defaultState: true
 		}
 
 		// standard with defaultState = true
@@ -74,25 +74,37 @@ metadata {
 
 		// utility tiles to fill the spaces
 		standardTile("empty2x2", "null", width: 2, height: 2, decoration: "flat") {
-			state "default", label:''
+			state "emptySmall", label:'', defaultState: true
 		}
 		standardTile("empty4x2", "null", width: 4, height: 2, decoration: "flat") {
-			state "default", label:''
+			state "emptyBigger", label:'', defaultState: true
 		}
 
-		main("standard1")
+		// multi-line text (explicit newlines)
+		standardTile("multiLine", "device.multiLine", width: 2, height: 2) {
+			state "multiLine", label: '${currentValue}', defaultState: true
+		}
+
+		standardTile("multiLineWithIcon", "device.multiLine", width: 2, height: 2) {
+			state "multiLineIcon", label: '${currentValue}', icon: "st.switches.switch.off", defaultState: true
+		}
+
+		main("actionRings")
 		details([
 			"actionRings", "actionFlat", "noActionFlat",
 
 			"flatLabel", "flatIconLabel", "flatIcon",
 
 			"flatDefaultState", "flatImplicitDefaultState1", "flatImplicitDefaultState2",
+
+			"multiLine", "multiLineWithIcon"
 		])
 	}
 }
 
 def installed() {
 	sendEvent(name: "switch", value: "off")
+	sendEvent(name: "multiLine", value: "Line 1\nLine 2\nLine 3")
 }
 
 def parse(String description) {

devicetypes/smartthings/tile-ux/tile-basic-value.src/tile-basic-value.groovy

@@ -22,63 +22,72 @@ metadata {
 
 	tiles(scale: 2) {
 		valueTile("text", "device.text", width: 2, height: 2) {
-			state "default", label:'${currentValue}'
+			state "val", label:'${currentValue}', defaultState: true
 		}
 
 		valueTile("longText", "device.longText", width: 2, height: 2) {
-			state "default", label:'${currentValue}'
+			state "val", label:'${currentValue}', defaultState: true
 		}
 
 		valueTile("integer", "device.integer", width: 2, height: 2) {
-			state "default", label:'${currentValue}'
+			state "val", label:'${currentValue}', defaultState: true
 		}
 
 		valueTile("integerFloat", "device.integerFloat", width: 2, height: 2) {
-			state "default", label:'${currentValue}'
+			state "val", label:'${currentValue}', defaultState: true
 		}
 
 		valueTile("pi", "device.pi", width: 2, height: 2) {
-			state "default", label:'${currentValue}'
+			state "val", label:'${currentValue}', defaultState: true
 		}
 
 		valueTile("floatAsText", "device.floatAsText", width: 2, height: 2) {
-			state "default", label:'${currentValue}'
+			state "val", label:'${currentValue}', defaultState: true
 		}
 
 		valueTile("bgColor", "device.integer", width: 2, height: 2) {
-			state "default", label:'${currentValue}', backgroundColor: "#e86d13"
+			state "val", label:'${currentValue}', backgroundColor: "#e86d13", defaultState: true
 		}
 
 		valueTile("bgColorRange", "device.integer", width: 2, height: 2) {
-			state "default", label:'${currentValue}', backgroundColors: [
+			state "val", label:'${currentValue}', defaultState: true, backgroundColors: [
 				[value: 10, color: "#ff0000"],
 				[value: 90, color: "#0000ff"]
 			]
 		}
 
 		valueTile("bgColorRangeSingleItem", "device.integer", width: 2, height: 2) {
-			state "default", label:'${currentValue}', backgroundColors: [
+			state "val", label:'${currentValue}', defaultState: true, backgroundColors: [
 				[value: 10, color: "#333333"]
 			]
 		}
 
 		valueTile("bgColorRangeConflict", "device.integer", width: 2, height: 2) {
-			state "default", label:'${currentValue}', backgroundColors: [
+			state "valWithConflict", label:'${currentValue}', defaultState: true, backgroundColors: [
 				[value: 10, color: "#990000"],
 				[value: 10, color: "#000099"]
 			]
 		}
 
-		valueTile("noValue", "device.nada", width: 2, height: 2) {
-			state "default", label:'${currentValue}'
+		valueTile("noValue", "device.nada", width: 4, height: 2) {
+			state "noval", label:'${currentValue}', defaultState: true
+		}
+
+		valueTile("multiLine", "device.multiLine", width: 3, height: 2) {
+			state "val", label: '${currentValue}', defaultState: true
+		}
+
+		valueTile("multiLineWithIcon", "device.multiLine", width: 3, height: 2) {
+			state "val", label: '${currentValue}', icon: "st.switches.switch.off", defaultState: true
 		}
 
 		main("text")
 		details([
-			"text", "longText", "integer", 
+			"text", "longText", "integer",
             "integerFloat", "pi", "floatAsText",
             "bgColor", "bgColorRange", "bgColorRangeSingleItem",
-            "bgColorRangeConflict", "noValue"
+            "bgColorRangeConflict", "noValue",
+            "multiLine", "multiLineWithIcon"
 		])
 	}
 }
@@ -90,6 +99,7 @@ def installed() {
 	sendEvent(name: "integerFloat", value: 47.0)
 	sendEvent(name: "pi", value: 3.14159)
 	sendEvent(name: "floatAsText", value: "3.14159")
+	sendEvent(name: "multiLine", value: "Line 1\nLine 2\nLine 3")
 }
 
 def parse(String description) {

devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy

@@ -39,15 +39,15 @@ metadata {
 				attributeState "turningOff", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute("device.level", key: "SECONDARY_CONTROL") {
-				attributeState "default", icon: 'st.Weather.weather1', action:"randomizeLevel"
+				attributeState "level", icon: 'st.Weather.weather1', action:"randomizeLevel", defaultState: true
 			}
 			tileAttribute("device.level", key: "SLIDER_CONTROL") {
-				attributeState "default", action:"switch level.setLevel"
+				attributeState "level", action:"switch level.setLevel", defaultState: true
 			}
 		}
 		multiAttributeTile(name:"valueTile", type:"generic", width:6, height:4) {
 			tileAttribute("device.level", key: "PRIMARY_CONTROL") {
-				attributeState "default", label:'${currentValue}', backgroundColors:[
+				attributeState "level", label:'${currentValue}', defaultState: true, backgroundColors:[
 					[value: 0, color: "#ff0000"],
 					[value: 20, color: "#ffff00"],
 					[value: 40, color: "#00ff00"],
@@ -67,17 +67,50 @@ metadata {
 				attributeState "VALUE_DOWN", action: "levelDown"
 			}
 		}
+		multiAttributeTile(name:"lengthyTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
+				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", defaultState: true
+			}
+			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
+				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", defaultState: true
+			}
+		}
+		multiAttributeTile(name:"multilineTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
+				attributeState "multiLineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", defaultState: true
+			}
+			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
+				attributeState "multiLineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", defaultState: true
+			}
+		}
+		multiAttributeTile(name:"lengthyTileWithIcon", type:"generic", width:6, height:4) {
+			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
+				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+			}
+			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
+				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+			}
+		}
+		multiAttributeTile(name:"multilineTileWithIcon", type:"generic", width:6, height:4) {
+			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
+				attributeState "multilineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+			}
+			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
+				attributeState "multilineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+			}
+		}
 
 		main(["basicTile"])
-		details(["basicTile", "sliderTile", "valueTile"])
+		details(["basicTile", "sliderTile", "valueTile", "lengthyTile", "multilineTile", "lengthyTileWithIcon", "multilineTileWithIcon"])
 	}
 }
 
 def installed() {
-
+	sendEvent(name: "lengthyText", value: "The value of this tile is long and should wrap to two lines")
+	sendEvent(name: "multilineText", value: "Line 1 YES\nLine 2 YES\nLine 3 NO")
 }
 
-def parse() {
+def parse(String description) {
 	// This is a simulated device. No incoming data to parse.
 }
 

devicetypes/smartthings/tile-ux/tile-multiattribute-lighting.src/tile-multiattribute-lighting.groovy

@@ -96,10 +96,10 @@ metadata {
 		}
 
 		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
+			state "reset", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single", defaultState: true
 		}
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+			state "refresh", label:"", action:"refresh.refresh", icon:"st.secondary.refresh", defaultState: true
 		}
 
 		main(["switch"])
@@ -173,7 +173,6 @@ def setColor(value) {
 def reset() {
 	log.debug "Executing 'reset'"
 	setAdjustedColor([level:100, hex:"#90C638", saturation:56, hue:23])
-	//parent.poll()
 }
 
 def setAdjustedColor(value) {
@@ -189,7 +188,6 @@ def setAdjustedColor(value) {
 
 def refresh() {
 	log.debug "Executing 'refresh'"
-	//parent.manualRefresh()
 }
 
 def adjustOutgoingHue(percent) {
@@ -208,4 +206,3 @@ def adjustOutgoingHue(percent) {
 	log.info "percent: $percent, adjusted: $adjusted"
 	adjusted
 }
-

devicetypes/smartthings/tile-ux/tile-multiattribute-mediaplayer.src/tile-multiattribute-mediaplayer.groovy

@@ -37,10 +37,10 @@ metadata {
 				attributeState("stopped", label:"Stopped", action:"music Player.play", nextState: "playing")
 			}
 			tileAttribute("device.status", key: "PREVIOUS_TRACK") {
-				attributeState("default", action:"music Player.previousTrack")
+				attributeState("status", action:"music Player.previousTrack", defaultState: true)
 			}
 			tileAttribute("device.status", key: "NEXT_TRACK") {
-				attributeState("default", action:"music Player.nextTrack")
+				attributeState("status", action:"music Player.nextTrack", defaultState: true)
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState("level", action:"music Player.setLevel")
@@ -50,7 +50,7 @@ metadata {
 				attributeState("muted", action:"music Player.unmute", nextState: "unmuted")
 			}
 			tileAttribute("device.trackDescription", key: "MARQUEE") {
-				attributeState("default", label:"${currentValue}")
+				attributeState("trackDescription", label:"${currentValue}", defaultState: true)
 			}
 		}
 

devicetypes/smartthings/tile-ux/tile-multiattribute-thermostat.src/tile-multiattribute-thermostat.groovy

@@ -32,14 +32,14 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"thermostatFull", type:"thermostat", width:6, height:4) {
 			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
+				attributeState("temp", label:'${currentValue}', unit:"dF", defaultState: true)
 			}
 			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
 				attributeState("VALUE_UP", action: "tempUp")
 				attributeState("VALUE_DOWN", action: "tempDown")
 			}
 			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
-				attributeState("default", label:'${currentValue}%', unit:"%")
+				attributeState("humidity", label:'${currentValue}%', unit:"%", defaultState: true)
 			}
 			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
 				attributeState("idle", backgroundColor:"#44b621")
@@ -53,15 +53,16 @@ metadata {
 				attributeState("auto", label:'${name}')
 			}
 			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
+				attributeState("heatingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
 			}
 			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
+				attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
 			}
 		}
 		multiAttributeTile(name:"thermostatNoHumidity", type:"thermostat", width:6, height:4) {
 			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
+                attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("temp", label:'${currentValue}', unit:"dF")
 			}
 			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
 				attributeState("VALUE_UP", action: "tempUp")
@@ -79,15 +80,16 @@ metadata {
 				attributeState("auto", label:'${name}')
 			}
 			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
+                attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("heatingSetpoint", label:'${currentValue}', unit:"dF")
 			}
 			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
+				attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
 			}
 		}
 		multiAttributeTile(name:"thermostatBasic", type:"thermostat", width:6, height:4) {
 			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState("default", label:'${currentValue}', unit:"dF",
+				attributeState("temp", label:'${currentValue}', unit:"dF", defaultState: true,
 				backgroundColors:[
 					[value: 31, color: "#153591"],
 					[value: 44, color: "#1e9cbb"],
@@ -118,30 +120,30 @@ metadata {
 			)
 		}
 		standardTile("tempDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'down', action:"tempDown"
+			state "tempDown", label:'down', action:"tempDown", defaultState: true
 		}
 		standardTile("tempUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'up', action:"tempUp"
+			state "tempUp", label:'up', action:"tempUp", defaultState: true
 		}
 
 		valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "heat", label:'${currentValue} heat', unit: "F", backgroundColor:"#ffffff"
 		}
 		standardTile("heatDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'down', action:"heatDown"
+			state "heatDown", label:'down', action:"heatDown", defaultState: true
 		}
 		standardTile("heatUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'up', action:"heatUp"
+			state "heatUp", label:'up', action:"heatUp", defaultState: true
 		}
 
 		valueTile("coolingSetpoint", "device.coolingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "cool", label:'${currentValue} cool', unit:"F", backgroundColor:"#ffffff"
 		}
 		standardTile("coolDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'down', action:"coolDown"
+			state "coolDown", label:'down', action:"coolDown", defaultState: true
 		}
 		standardTile("coolUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'up', action:"coolUp"
+			state "coolUp", label:'up', action:"coolUp", defaultState: true
 		}
 
 		standardTile("mode", "device.thermostatMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -13,7 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
 metadata {
 	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
@@ -21,28 +21,28 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-        
+
 		command "enrollResponse"
- 
- 
+
+
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Visonic", model: "MCT-340 SMA"
 	}
- 
+
 	simulator {
- 
+
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
- 
+
 	tiles {
     	standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
 			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
-    	
+
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
@@ -58,23 +58,23 @@ metadata {
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-        
+
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-        
+
 		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
 			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
 		}
- 
+
 		main (["contact", "temperature"])
 		details(["contact","temperature","battery","refresh","configure"])
 	}
 }
- 
+
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -88,10 +88,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
- 
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -99,7 +99,7 @@ def parse(String description) {
     }
     return result
 }
- 
+
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -125,20 +125,20 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
- 
+
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -147,10 +147,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
- 
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -163,7 +163,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-    
+
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -196,7 +196,7 @@ private Map parseIasMessage(String description) {
     }
     return resultMap
 }
- 
+
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -209,11 +209,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-    
+
     def result = [
     	name: 'battery'
     ]
-    
+
 	def volts = rawValue / 10
 	def descriptionText
 	if (volts > 3.5) {
@@ -223,7 +223,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -261,7 +262,7 @@ def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
 	[
-    
+
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
@@ -274,24 +275,24 @@ def configure() {
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
     	"delay 1000",
-        
+
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
+
         "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
+
         "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
+
+
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
+
+
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
 		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
-        
+
         "delay 500"
 	]
     return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
@@ -299,11 +300,11 @@ def configure() {
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [	
-    	
+    [
+
 	"raw 0x500 {01 23 00 00 00}", "delay 200",
     "send 0x${device.deviceNetworkId} 1 1"
-        
+
     ]
 }
 private hex(value) {

devicetypes/smartthings/zigbee-hue-bulb.src/zigbee-hue-bulb.groovy

@@ -11,6 +11,9 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+
+//@Deprecated - Moved to zll-rgbw-bulb
+
 /* Philips Hue (via Zigbee)
 
 Capabilities:
@@ -22,10 +25,10 @@ Capabilities:
   Sensor
   Switch
   Switch Level
-  
+
 Custom Commands:
   setAdjustedColor
-    
+
 */
 
 metadata {
@@ -41,7 +44,7 @@ metadata {
 
 		command "setAdjustedColor"
 
-		fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000", outClusters: "0019"
+		//fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000", outClusters: "0019"
 	}
 
 	// simulator metadata

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -0,0 +1,102 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+        capability "Configuration"
+        capability "Polling"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
+
+        //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019"
+        //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019", manufacturer: "CREE", model: "Connected A-19 60W Equivalent", deviceJoinName: "Cree Connected Bulb"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 W clear", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 W clear - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019", manufacturer: "Philips", model: "LWB006", deviceJoinName: "Philips Hue White"
+    }
+
+    // simulator metadata
+    simulator {
+        // status messages
+        status "on": "on/off: 1"
+        status "off": "on/off: 0"
+
+        // reply messages
+        reply "zcl on-off on": "on/off: 1"
+        reply "zcl on-off off": "on/off: 0"
+    }
+
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+        }
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        main "switch"
+        details(["switch", "refresh"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+
+    def resultMap = zigbee.getEvent(description)
+    if (resultMap) {
+        sendEvent(resultMap)
+    }
+    else {
+        log.debug "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
+}
+
+def off() {
+    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def on() {
+    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+}
+
+def refresh() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh()
+}
+
+def poll() {
+    refresh()
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+}

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -0,0 +1,150 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+        capability "Color Control"
+        capability "Color Temperature"
+        capability "Configuration"
+        capability "Polling"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
+
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 RGBW"
+    }
+
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+            tileAttribute ("device.color", key: "COLOR_CONTROL") {
+                attributeState "color", action:"color control.setColor"
+            }
+        }
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["switch"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+//Globals
+private getATTRIBUTE_HUE() { 0x0000 }
+private getATTRIBUTE_SATURATION() { 0x0001 }
+private getHUE_COMMAND() { 0x00 }
+private getSATURATION_COMMAND() { 0x03 }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+
+    def finalResult = zigbee.getEvent(description)
+    if (finalResult) {
+        log.debug finalResult
+        sendEvent(finalResult)
+    }
+    else {
+        def zigbeeMap = zigbee.parseDescriptionAsMap(description)
+        log.trace "zigbeeMap : $zigbeeMap"
+
+        if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
+            if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+                sendEvent(name: "hue", value: hueValue, displayed:false)
+            }
+            else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                sendEvent(name: "saturation", value: saturationValue, displayed:false)
+            }
+        }
+        else {
+            log.info "DID NOT PARSE MESSAGE for description : $description"
+        }
+    }
+}
+
+def on() {
+    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def off() {
+    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def refresh() {
+    refreshAttributes() + configureAttributes()
+}
+
+def poll() {
+    refreshAttributes()
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    configureAttributes() + refreshAttributes()
+}
+
+def configureAttributes() {
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+}
+
+def refreshAttributes() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION)
+}
+
+def setColorTemperature(value) {
+    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+}
+
+def setColor(value){
+    log.trace "setColor($value)"
+    zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
+}
+
+def setHue(value) {
+    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+}
+
+def setSaturation(value) {
+    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
+}

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -0,0 +1,124 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+        capability "Color Temperature"
+        capability "Configuration"
+        capability "Polling"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
+
+        attribute "colorName", "string"
+        command "setGenericName"
+
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"PAR16 50 TW", deviceJoinName: "OSRAM LIGHTIFY LED PAR16 50 Tunable White"
+    }
+
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
+                attributeState "colorName", label:'${currentValue}'
+            }
+        }
+
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+        main(["switch"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+    def event = zigbee.getEvent(description)
+    if (event) {
+        sendEvent(event)
+    }
+    else {
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
+}
+
+def off() {
+    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def on() {
+    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()
+}
+
+def refresh() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+}
+
+def poll() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+}
+
+def setColorTemperature(value) {
+    setGenericName(value)
+    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+}
+
+//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
+def setGenericName(value){
+    if (value != null) {
+        def genericName = ""
+        if (value < 3300) {
+            genericName = "Soft White"
+        } else if (value < 4150) {
+            genericName = "Moonlight"
+        } else if (value <= 5000) {
+            genericName = "Cool White"
+        } else {
+            genericName = "Daylight"
+        }
+        sendEvent(name: "colorName", value: genericName)
+    }
+}

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -25,7 +25,9 @@ metadata {
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x80,0x84,0x85,0x86,0x72"
 		fingerprint deviceId: "0x07", inClusters: "0x30"
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
 	}
 
 	// simulator metadata
@@ -78,7 +80,7 @@ def updated() {
 	def cmds = []
 	if (!state.MSR) {
 		cmds = [
-			zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
+			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
 			"delay 1200",
 			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 		]
@@ -91,9 +93,9 @@ def updated() {
 }
 
 def configure() {
-	delayBetween([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
-		batteryGetCommand()
+	commands([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet()
 	], 6000)
 }
 
@@ -144,12 +146,11 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 			result << sensorValueEvent(1)
 		} else if (cmd.event == 0x03) {
 			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId))
-			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
 		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
 			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
 		} else if (cmd.event == 0x07) {
-			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
 			result << createEvent(name: "motion", value: "active", descriptionText:"$device.displayName detected motion")
 		}
 	} else if (cmd.notificationType) {
@@ -167,14 +168,13 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	def event = createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
 	def cmds = []
 	if (!state.MSR) {
-		cmds << zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId).format()
-		cmds << zwave.manufacturerSpecificV2.manufacturerSpecificGet().format()
+		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 		cmds << "delay 1200"
 	}
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
-		cmds << batteryGetCommand()
+		cmds << command(zwave.batteryV1.batteryGet())
 	} else {
-		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation()
 	}
 	[event, response(cmds)]
 }
@@ -209,7 +209,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 		if (msr == "0086-0102-0059") {
 			result << response(zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format())
 		} else {
-			result << response(batteryGetCommand())
+			result << response(command(zwave.batteryV1.batteryGet()))
 		}
 	}
 
@@ -217,7 +217,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x85: 2, 0x70: 1])
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
 	// log.debug "encapsulated: $encapsulatedCommand"
 	if (encapsulatedCommand) {
 		state.sec = 1
@@ -229,18 +229,22 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
 }
 
-def batteryGetCommand() {
-	def cmd = zwave.batteryV1.batteryGet()
-	if (state.sec) {
-		cmd = zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd)
+private command(physicalgraph.zwave.Command cmd) {
+	if (state.sec == 1) {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	} else {
+		cmd.format()
 	}
-	cmd.format()
+}
+
+private commands(commands, delay=200) {
+	delayBetween(commands.collect{ command(it) }, delay)
 }
 
 def retypeBasedOnMSR() {
 	switch (state.MSR) {
 		case "0086-0002-002D":
-			log.debug("Changing device type to Z-Wave Water Sensor")
+			log.debug "Changing device type to Z-Wave Water Sensor"
 			setDeviceType("Z-Wave Water Sensor")
 			break
 		case "011F-0001-0001":  // Schlage motion
@@ -249,9 +253,20 @@ def retypeBasedOnMSR() {
 		case "0060-0001-0002":  // Everspring SP814
 		case "0060-0001-0003":  // Everspring HSP02
 		case "011A-0601-0901":  // Enerwave ZWN-BPC
-			log.debug("Changing device type to Z-Wave Motion Sensor")
+			log.debug "Changing device type to Z-Wave Motion Sensor"
 			setDeviceType("Z-Wave Motion Sensor")
 			break
-		
+		case "013C-0002-000D":  // Philio multi +
+			log.debug "Changing device type to 3-in-1 Multisensor Plus (SG)"
+			setDeviceType("3-in-1 Multisensor Plus (SG)")
+			break
+		case "0109-2001-0106":  // Vision door/window
+			log.debug "Changing device type to Z-Wave Plus Door/Window Sensor"
+			setDeviceType("Z-Wave Plus Door/Window Sensor")
+			break
+		case "0109-2002-0205": // Vision Motion
+			log.debug "Changing device type to Z-Wave Plus Motion/Temp Sensor"
+			setDeviceType("Z-Wave Plus Motion/Temp Sensor")
+			break
 	}
 }

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -21,6 +21,13 @@ metadata {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
+
+		fingerprint mfr: "011F", prod: "0001", model: "0001", deviceJoinName: "Schlage Motion Sensor"  // Schlage motion
+		fingerprint mfr: "014A", prod: "0001", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion
+		fingerprint mfr: "014A", prod: "0004", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion +
+		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
+		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
+		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
 	}
 
 	simulator {
@@ -125,9 +132,9 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	}
 	if (!state.lastbat || (new Date().time) - state.lastbat > 53*60*60*1000) {
 		result << response(zwave.batteryV1.batteryGet())
-		result << response("delay 1200")
+	} else {
+		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	}
-	result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	result
 }
 

devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy

@@ -0,0 +1,270 @@
+/**
+*	Copyright 2016 SmartThings
+*	Copyright 2015 AstraLink
+*
+*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+*	in compliance with the License. You may obtain a copy of the License at:
+*
+*		http://www.apache.org/licenses/LICENSE-2.0
+*
+*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+*	for the specific language governing permissions and limitations under the License.
+*
+*	Z-Wave Plus Door/Window Sensor, ZD2102*-5
+*
+*/
+
+metadata {
+	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Contact Sensor"
+		capability "Configuration"
+		capability "Battery"
+		capability "Sensor"
+
+		// for Astralink
+		attribute "ManufacturerCode", "string"
+		attribute "ProduceTypeCode", "string"
+		attribute "ProductCode", "string"
+		attribute "WakeUp", "string"
+		attribute "WirelessConfig", "string"
+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x70, 0x84, 0x7A"
+		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,71"
+		fingerprint mfr:"0109", prod:"2001", model:"0106"  // not using deviceJoinName because it's sold under different brand names
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+			}
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main (["contact"])
+		details(["contact","battery"])
+	}
+
+	simulator {
+		// messages the device returns in response to commands it receives
+		status "open (basic)" : "command: 9881, payload: 00 20 01 FF"
+		status "closed (basic)" : "command: 9881 payload: 00 20 01 00"
+		status "open (notification)" : "command: 9881, payload: 00 71 05 06 FF 00 FF 06 16 00 00"
+		status "closed (notification)" : "command: 9881, payload: 00 71 05 06 00 00 FF 06 17 00 00"
+		status "tamper: enclosure opened" : "command: 9881, payload: 00 71 05 07 FF 00 FF 07 03 00 00"
+		status "tamper: enclosure replaced" : "command: 9881, payload: 00 71 05 07 00 00 FF 07 00 00 00"
+		status "wake up" : "command: 9881, payload: 00 84 07"
+		status "battery (100%)" : "command: 9881, payload: 00 80 03 64"
+		status "battery low" : "command: 9881, payload: 00 80 03 FF"
+	}
+}
+
+def configure() {
+	log.debug "configure()"
+	def cmds = []
+
+	if (state.sec != 1) {
+		// secure inclusion may not be complete yet
+		cmds << "delay 1000"
+	}
+
+	cmds += secureSequence([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet(),
+	], 500)
+
+	cmds << "delay 8000"
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+	return cmds
+}
+
+private getCommandClassVersions() {
+	[
+		0x71: 3,  // Notification
+		0x5E: 2,  // ZwaveplusInfo
+		0x59: 1,  // AssociationGrpInfo
+		0x85: 2,  // Association
+		0x20: 1,  // Basic
+		0x80: 1,  // Battery
+		0x70: 1,  // Configuration
+		0x5A: 1,  // DeviceResetLocally
+		0x7A: 2,  // FirmwareUpdateMd
+		0x72: 2,  // ManufacturerSpecific
+		0x73: 1,  // Powerlevel
+		0x98: 1,  // Security
+		0x84: 2,  // WakeUp
+		0x86: 1,  // Version
+	]
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	def result = []
+	def cmd
+	if (description.startsWith("Err 106")) {
+		state.sec = 0
+		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
+				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
+	} else if (description.startsWith("Err")) {
+		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
+	} else {
+		cmd = zwave.parse(description, commandClassVersions)
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+
+	if (result instanceof List) {
+		result = result.flatten()
+	}
+
+	log.debug "Parsed '$description' to $result"
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
+	log.debug "encapsulated: $encapsulatedCommand"
+	if (encapsulatedCommand) {
+		state.sec = 1
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		return [createEvent(descriptionText: cmd.toString())]
+	}
+}
+
+def sensorValueEvent(value) {
+	if (value) {
+		createEvent(name: "contact", value: "open", descriptionText: "$device.displayName is open")
+	} else {
+		createEvent(name: "contact", value: "closed", descriptionText: "$device.displayName is closed")
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
+	return sensorValueEvent(cmd.sensorValue)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
+	return sensorValueEvent(cmd.sensorState)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def result = []
+	if (cmd.notificationType == 0x06 && cmd.event == 0x16) {
+		result << sensorValueEvent(1)
+	} else if (cmd.notificationType == 0x06 && cmd.event == 0x17) {
+		result << sensorValueEvent(0)
+	} else if (cmd.notificationType == 0x07) {
+		if (cmd.event == 0x00) {
+			if (cmd.eventParametersLength == 0 || cmd.eventParameter[0] != 3) {
+				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
+			} else {
+				result << sensorValueEvent(0)
+			}
+		} else if (cmd.event == 0x01 || cmd.event == 0x02) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x03) {
+			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			if (!device.currentState("ManufacturerCode")) {
+				result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+			}
+		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
+			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
+		} else {
+			result << createEvent(descriptionText: "$device.displayName event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
+		}
+	} else if (cmd.notificationType) {
+		result << createEvent(descriptionText: "$device.displayName notification $cmd.notificationType event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
+	} else {
+		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, isStateChange: true, displayed: false)
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
+	def cmds = []
+
+	if (!device.currentState("ManufacturerCode")) {
+		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		cmds << "delay 2000"
+	}
+	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
+		event.descriptionText += ", requesting battery"
+		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
+		cmds << "delay 800"
+		cmds << secure(zwave.batteryV1.batteryGet())
+		cmds << "delay 2000"
+	} else {
+		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
+	}
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+
+	return [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	def event = createEvent(map)
+
+	// Save at least one battery report in events list every few days
+	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
+		map.isStateChange = true
+	}
+	state.lastbat = now()
+	return [event]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
+	def productTypeCode = String.format("%04X", cmd.productTypeId)
+	def productCode = String.format("%04X", cmd.productId)
+	def wirelessConfig = "ZWP"
+	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
+
+	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
+	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
+	result << createEvent(name: "ProductCode", value: productCode)
+	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
+
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	if (state.sec == 0) {  // default to secure
+		cmd.format()
+	} else {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	}
+}
+
+private secureSequence(commands, delay=200) {
+	delayBetween(commands.collect{ secure(it) }, delay)
+}

devicetypes/smartthings/zwave-plus-motion-temp-sensor.src/zwave-plus-motion-temp-sensor.groovy

@@ -0,0 +1,327 @@
+/**
+*	Copyright 2016 SmartThings
+*	Copyright 2015 AstraLink
+*
+*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+*	in compliance with the License. You may obtain a copy of the License at:
+*
+*		http://www.apache.org/licenses/LICENSE-2.0
+*
+*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+*	for the specific language governing permissions and limitations under the License.
+*
+*	Z-Wave Plus Motion Sensor with Temperature Measurement, ZP3102*-5
+*
+*/
+
+metadata {
+	definition (name: "Z-Wave Plus Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Motion Sensor"
+		capability "Temperature Measurement"
+		capability "Configuration"
+		capability "Battery"
+		capability "Sensor"
+
+		// for Astralink
+		attribute "ManufacturerCode", "string"
+		attribute "ProduceTypeCode", "string"
+		attribute "ProductCode", "string"
+		attribute "WakeUp", "string"
+		attribute "WirelessConfig", "string"
+				
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x31, 0x70, 0x84, 0x7A"
+		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,31,71"
+		fingerprint mfr:"0109", prod:"2002", model:"0205"  // not using deviceJoinName because it's sold under different brand names
+	}
+
+	tiles {
+		standardTile("motion", "device.motion", width: 3, height: 2) {
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+		}
+
+		valueTile("temperature", "device.temperature", inactiveLabel: false) {
+			state "temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
+			state "battery", label:'${currentValue}% battery', unit:"%"
+		}
+
+		main(["motion", "temperature"])
+		details(["motion", "temperature", "battery"])
+	}
+}
+
+def updated() {
+	if (!device.currentState("ManufacturerCode")) {
+		response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+	}
+}
+
+def configure() {
+	log.debug "configure()"
+	def cmds = []
+
+	if (state.sec != 1) {
+		// secure inclusion may not be complete yet
+		cmds << "delay 1000"
+	}
+
+	cmds += secureSequence([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet(),
+		zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
+	], 500)
+
+	cmds << "delay 8000"
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+	return cmds
+}
+
+private getCommandClassVersions() {
+	[
+		0x71: 3,  // Notification
+		0x5E: 2,  // ZwaveplusInfo
+		0x59: 1,  // AssociationGrpInfo
+		0x85: 2,  // Association
+		0x20: 1,  // Basic
+		0x80: 1,  // Battery
+		0x70: 1,  // Configuration
+		0x5A: 1,  // DeviceResetLocally
+		0x7A: 2,  // FirmwareUpdateMd
+		0x72: 2,  // ManufacturerSpecific
+		0x73: 1,  // Powerlevel
+		0x98: 1,  // Security
+		0x31: 5,  // SensorMultilevel
+		0x84: 2	  // WakeUp
+	]
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	def result = []
+	def cmd
+	if (description.startsWith("Err 106")) {
+		state.sec = 0
+		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
+				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
+	} else if (description.startsWith("Err")) {
+		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
+	} else {
+		cmd = zwave.parse(description, commandClassVersions)
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+
+	if (result instanceof List) {
+		result = result.flatten()
+	}
+
+	log.debug "Parsed '$description' to $result"
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
+	log.debug "encapsulated: $encapsulatedCommand"
+	if (encapsulatedCommand) {
+		state.sec = 1
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		return [createEvent(descriptionText: cmd.toString())]
+	}
+}
+
+def sensorValueEvent(value) {
+	def result = []
+	if (value) {
+		log.debug "sensorValueEvent($value) : active"
+		result << createEvent(name: "motion", value: "active", descriptionText: "$device.displayName detected motion")
+	} else {
+		log.debug "sensorValueEvent($value) : inactive"
+		result << createEvent(name: "motion", value: "inactive", descriptionText: "$device.displayName motion has stopped")
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
+	return sensorValueEvent(cmd.sensorValue)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
+	return sensorValueEvent(cmd.sensorState)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def result = []
+	if (cmd.notificationType == 0x07) {
+		if (cmd.event == 0x01 || cmd.event == 0x02) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x03) {
+			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
+			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
+		} else if (cmd.event == 0x07) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x08) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x00) {
+			if (cmd.eventParametersLength && cmd.eventParameter[0] == 3) {
+				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
+			} else {
+				result << sensorValueEvent(0)
+			}
+		} else if (cmd.event == 0xFF) {
+			result << sensorValueEvent(1)
+		} else {
+			result << createEvent(descriptionText: "$device.displayName sent event $cmd.event")
+		}
+	} else if (cmd.notificationType) {
+		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
+		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
+	} else {
+		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
+	def cmds = []
+
+	if (!device.currentState("ManufacturerCode")) {
+		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		cmds << "delay 2000"
+	}
+	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
+		event.descriptionText += ", requesting battery"
+		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
+		cmds << "delay 800"
+		cmds << secure(zwave.batteryV1.batteryGet())
+		cmds << "delay 2000"
+	} else {
+		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
+	}
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+
+	return [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def result = []
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	def event = createEvent(map)
+
+	// Save at least one battery report in events list every few days
+	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
+		map.isStateChange = true
+	}
+	state.lastbat = now()
+	return [event]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def result = []
+	def map = [:]
+	switch (cmd.sensorType) {
+		case 1:
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			map.name = "temperature"
+			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+			map.unit = getTemperatureScale()
+			break;
+		case 3:
+			map.name = "illuminance"
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = "lux"
+			break;
+		case 5:
+			map.name = "humidity"
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = cmd.scale == 0 ? "%" : ""
+			break;
+		case 0x1E:
+			map.name = "loudness"
+			map.unit = cmd.scale == 1 ? "dBA" : "dB"
+			map.value = cmd.scaledSensorValue.toString()
+			break;
+		default:
+			map.descriptionText = cmd.toString()
+	}
+	result << createEvent(map)
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
+	def productTypeCode = String.format("%04X", cmd.productTypeId)
+	def productCode = String.format("%04X", cmd.productId)
+	def wirelessConfig = "ZWP"
+	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
+	
+	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
+	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
+	result << createEvent(name: "ProductCode", value: productCode)
+	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
+
+	if (manufacturerCode == "0109" && productTypeCode == "2002") {
+		result << response(secureSequence([
+			// Change re-trigger duration to 1 minute
+			zwave.configurationV1.configurationSet(parameterNumber: 1, configurationValue: [1], size: 1),
+			zwave.batteryV1.batteryGet(),
+			zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
+		], 400))
+	}
+
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	if (state.sec == 0) {  // default to secure
+		cmd.format()
+	} else {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	}
+}
+
+private secureSequence(commands, delay=200) {
+	delayBetween(commands.collect{ secure(it) }, delay)
+}

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -95,11 +95,17 @@ def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	if (state.manufacturer != cmd.manufacturerName) {
-		updateDataValue("manufacturer", cmd.manufacturerName)
-	}
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+	log.debug "manufacturerName: ${cmd.manufacturerName}"
+	log.debug "productId:        ${cmd.productId}"
+	log.debug "productTypeId:    ${cmd.productTypeId}"
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	updateDataValue("MSR", msr)
+	updateDataValue("manufacturer", cmd.manufacturerName)
+	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 
+
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in
 	[:]

smartapps/com-gidjit-smartthings-hub/gidjit-hub.src/gidjit-hub.groovy

@@ -0,0 +1,252 @@
+/**
+ *  Gidjit Hub
+ *
+ *  Copyright 2016 Matthew Page
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Gidjit Hub",
+    namespace: "com.gidjit.smartthings.hub",
+    author: "Matthew Page",
+    description: "Act as an endpoint so user's of Gidjit can quickly access and control their devices and execute routines. Users can do this quickly as Gidjit filters these actions  based on their environment",
+    category: "Convenience",
+    iconUrl: "http://www.gidjit.com/appicon.png",
+    iconX2Url: "http://www.gidjit.com/appicon@2x.png",
+    iconX3Url: "http://www.gidjit.com/appicon@3x.png",
+    oauth: [displayName: "Gidjit", displayLink: "www.gidjit.com"])
+
+
+
+preferences {
+  section ("Allow Gidjit to have access, there by allowing you to quickly control and monitor the following devices") {
+    input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
+    input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
+    input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
+    //input "bulbs", "capability.colorControl", title: "Control your lights", multiple: true, required: false //windowShade
+
+  }
+}
+mappings {
+  path("/structureinfo") {
+    action: [
+      GET: "structureInfo"
+    ]
+  }
+  path("/helloactions") {
+    action: [
+      GET: "helloActions"
+    ]
+  }
+  path("/helloactions/:label") {
+    action: [
+      PUT: "executeAction"
+    ]
+  }
+
+  path("/switch/:id/:command") {
+    action: [
+      PUT: "updateSwitch"
+    ]
+  }
+
+  path("/thermostat/:id/:command") {
+    action: [
+      PUT: "updateThermostat"
+    ]
+  }
+
+  path("/windowshade/:id/:command") {
+    action: [
+      PUT: "updateWindowShade"
+    ]
+  }
+  path("/acquiredata/:id") {
+    action: [
+      GET: "acquiredata"
+    ]
+  }
+}
+
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// subscribe to attributes, devices, locations, etc.
+}
+def helloActions() {
+	def actions = location.helloHome?.getPhrases()*.label
+    if(!actions) {
+    	return []
+    }
+	return actions
+}
+def executeAction() {
+    def actions = location.helloHome?.getPhrases()*.label
+    def a = actions?.find() { it == params.label }
+    if (!a) {
+        httpError(400, "invalid label $params.label")
+        return
+    }
+    location.helloHome?.execute(params.label)
+}
+/*  this is the primary function called to query at the structure and its devices */
+def structureInfo() { //list all devices
+	def list = [:]
+    def currId = location.id
+    list[currId] = [:]
+    list[currId].name = location.name
+    list[currId].id = location.id
+    list[currId].temperatureScale = location.temperatureScale
+    list[currId].devices = [:]
+  
+    def setValues = {
+   		if (params.brief) {
+            return [id: it.id, name: it.displayName]
+        }
+        def newList = [id: it.id, name: it.displayName, suppCapab: it.capabilities.collect {
+            "$it.name"
+        }, suppAttributes: it.supportedAttributes.collect {
+            "$it.name"      
+        }, suppCommands: it.supportedCommands.collect {
+            "$it.name"      
+        }]
+
+        return newList
+    }
+    switches?.each {
+      list[currId].devices[it.id] = setValues(it)
+    }
+    thermostats?.each {
+      list[currId].devices[it.id] = setValues(it)
+    }
+    windowShades?.each {
+      list[currId].devices[it.id] = setValues(it)
+    }
+
+    return list
+
+}
+/*  This function returns all of the current values of the specified Devices attributes */
+def acquiredata() {
+	def resp = [:]
+    if (!params.id) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    def dev = switches.find() { it.id == params.id } ?: windowShades.find() { it.id == params.id } ?:
+    	thermostats.find() { it.id == params.id }    
+   
+    if (!dev) {
+    	httpError(400, "invalid id $params.id")
+        return    
+    }
+    def att = dev.supportedAttributes
+    att.each {
+    	resp[it.name] = dev.currentValue("$it.name")
+    }
+    return resp
+}
+
+void updateSwitch() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+	def sw = switches.find() { it.id == params.id }
+    if (!sw) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    switch(command) {
+        case "on":
+        	if ( sw.currentSwitch != "on" ) {
+            	sw.on()
+            }
+            break
+        case "off":
+        	if ( sw.currentSwitch != "off" ) {
+            	sw.off()
+            }
+            break
+        default:
+            httpError(400, "$command is not a valid")
+    }
+}
+
+
+void updateThermostat() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+	def therm = thermostats.find() { it.id == params.id }
+    if (!therm || !command) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    def passComm = [
+        "off",
+        "heat",
+        "emergencyHeat",
+        "cool",
+        "fanOn",
+        "fanAuto",
+        "fanCirculate",
+        "auto"
+
+	]
+    def passNumParamComm = [
+    	"setHeatingSetpoint",
+    	"setCoolingSetpoint",   
+    ]
+    def passStringParamComm = [
+        "setThermostatMode",
+        "setThermostatFanMode",
+	]
+    if (command in passComm) {
+    	therm."$command"()	
+    } else if (command in passNumParamComm && params.p1 && params.p1.isFloat()) {
+    	therm."$command"(Float.parseFloat(params.p1))	
+    } else if (command in passStringParamComm && params.p1) {
+    	therm."$command"(params.p1)	
+    } else {
+    	httpError(400, "$command is not a valid command")
+    }
+}
+
+void updateWindowShade() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+	def ws = windowShades.find() { it.id == params.id }
+    if (!ws || !command) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    def passComm = [
+		"open",
+        "close",
+        "presetPosition",
+	]
+    if (command in passComm) {
+    	ws."$command"()		
+    } else {
+    	httpError(400, "$command is not a valid command")
+    }
+}
+// TODO: implement event handlers

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -4,29 +4,33 @@
 import java.text.DecimalFormat
 import groovy.json.JsonSlurper
 
-private apiUrl() 			{ "https://api.netatmo.com" }
-private getVendorName() 	{ "netatmo" }
-private getVendorAuthPath()	{ "https://api.netatmo.com/oauth2/authorize?" }
-private getVendorTokenPath(){ "https://api.netatmo.com/oauth2/token" }
+private getApiUrl()			{ "https://api.netatmo.com" }
+private getVendorName()		{ "netatmo" }
+private getVendorAuthPath()	{ "${apiUrl}/oauth2/authorize?" }
+private getVendorTokenPath(){ "${apiUrl}/oauth2/token" }
 private getVendorIcon()		{ "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png" }
-private getClientId() 		{ appSettings.clientId }
-private getClientSecret() 	{ appSettings.clientSecret }
-private getServerUrl() 		{ "https://graph.api.smartthings.com" }
+private getClientId()		{ appSettings.clientId }
+private getClientSecret()	{ appSettings.clientSecret }
+private getServerUrl() 		{ appSettings.serverUrl }
+private getShardUrl()		{ return getApiServerUrl() }
+private getCallbackUrl()	{ "${serverUrl}/oauth/callback" }
+private getBuildRedirectUrl() { "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${shardUrl}" }
 
 // Automatically generated. Make future change here.
 definition(
-    name: "Netatmo (Connect)",
-    namespace: "dianoga",
-    author: "Brian Steere",
-    description: "Netatmo Integration",
-    category: "SmartThings Labs",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png",
-    oauth: true,
-    singleInstance: true
+	name: "Netatmo (Connect)",
+	namespace: "dianoga",
+	author: "Brian Steere",
+	description: "Netatmo Integration",
+	category: "SmartThings Labs",
+	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1.png",
+	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png",
+	oauth: true,
+	singleInstance: true
 ){
 	appSetting "clientId"
 	appSetting "clientSecret"
+	appSetting "serverUrl"
 }
 
 preferences {
@@ -35,35 +39,52 @@ preferences {
 }
 
 mappings {
-	path("/receivedToken"){action: [POST: "receivedToken", GET: "receivedToken"]}
-	path("/receiveToken"){action: [POST: "receiveToken", GET: "receiveToken"]}
-    path("/auth"){action: [GET: "auth"]}
+	path("/oauth/initialize") {action: [GET: "oauthInitUrl"]}
+	path("/oauth/callback") {action: [GET: "callback"]}
 }
 
 def authPage() {
 	log.debug "In authPage"
-	if(canInstallLabs()) {
-		def description = null
 
-		if (state.vendorAccessToken == null) {
-			log.debug "About to create access token."
+	def description
+	def uninstallAllowed = false
+	def oauthTokenProvided = false
 
-			createAccessToken()
-			description = "Tap to enter Credentials."
+	if (!state.accessToken) {
+		log.debug "About to create access token."
+		state.accessToken = createAccessToken()
+	}
 
-			return dynamicPage(name: "Credentials", title: "Authorize Connection", nextPage:"listDevices", uninstall: true, install:false) {
-				section { href url:buildRedirectUrl("auth"), style:"embedded", required:false, title:"Connect to ${getVendorName()}:", description:description }
+	if (canInstallLabs()) {
+
+		def redirectUrl = getBuildRedirectUrl()
+		log.debug "Redirect url = ${redirectUrl}"
+
+		if (state.authToken) {
+			description = "Tap 'Next' to proceed"
+			uninstallAllowed = true
+			oauthTokenProvided = true
+		} else {
+			description = "Click to enter Credentials."
+		}
+
+		if (!oauthTokenProvided) {
+			log.debug "Show the login page"
+			return dynamicPage(name: "Credentials", title: "Authorize Connection", nextPage:"listDevices", uninstall: uninstallAllowed, install:false) {
+				section() {
+					paragraph "Tap below to log in to the netatmo and authorize SmartThings access."
+					href url:redirectUrl, style:"embedded", required:false, title:"Connect to ${getVendorName()}:", description:description
+				}
 			}
 		} else {
-			description = "Tap 'Next' to proceed"
-
-			return dynamicPage(name: "Credentials", title: "Credentials Accepted!", nextPage:"listDevices", uninstall: true, install:false) {
-				section { href url: buildRedirectUrl("receivedToken"), style:"embedded", required:false, title:"${getVendorName()} is now connected to SmartThings!", description:description }
+			log.debug "Show the devices page"
+			return dynamicPage(name: "Credentials", title: "Credentials Accepted!", nextPage:"listDevices", uninstall: uninstallAllowed, install:false) {
+				section() {
+					input(name:"Devices", style:"embedded", required:false, title:"${getVendorName()} is now connected to SmartThings!", description:description) 
+				}
 			}
 		}
-	}
-	else
-	{
+	} else {
 		def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date.
 
 To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
@@ -78,229 +99,175 @@ To update your Hub, access Location Settings in the Main Menu (tap the gear next
 	}
 }
 
-def auth() {
-	redirect location: oauthInitUrl()
-}
-
 def oauthInitUrl() {
 	log.debug "In oauthInitUrl"
 
-	/* OAuth Step 1: Request access code with our client ID */
-
 	state.oauthInitState = UUID.randomUUID().toString()
 
-	def oauthParams = [ response_type: "code",
-		client_id: getClientId(),
-		state: state.oauthInitState,
-		redirect_uri: buildRedirectUrl("receiveToken") ,
-		scope: "read_station"
-		]
-
-	return getVendorAuthPath() + toQueryString(oauthParams)
-}
-
-def buildRedirectUrl(endPoint) {
-	log.debug "In buildRedirectUrl"
-
-	return getServerUrl() + "/api/token/${state.accessToken}/smartapps/installations/${app.id}/${endPoint}"
-}
-
-def receiveToken() {
-	log.debug "In receiveToken"
-
 	def oauthParams = [
-		client_secret: getClientSecret(),
+		response_type: "code",
 		client_id: getClientId(),
-		grant_type: "authorization_code",
-		redirect_uri: buildRedirectUrl('receiveToken'),
-		code: params.code,
+		client_secret: getClientSecret(),
+		state: state.oauthInitState,
+		redirect_uri: getCallbackUrl(),
 		scope: "read_station"
-		]
-
-	def tokenUrl = getVendorTokenPath()
-	def params = [
-		uri: tokenUrl,
-		contentType: 'application/x-www-form-urlencoded',
-		body: oauthParams,
 	]
 
-    log.debug params
+	log.debug "REDIRECT URL: ${getVendorAuthPath() + toQueryString(oauthParams)}"
 
-	/* OAuth Step 2: Request access token with our client Secret and OAuth "Code" */
-	try {
-		httpPost(params) { response ->
-        	log.debug response.data
-			def slurper = new JsonSlurper();
+	redirect (location: getVendorAuthPath() + toQueryString(oauthParams))
+}
 
-			response.data.each {key, value ->
-				def data = slurper.parseText(key);
-				log.debug "Data: $data"
+def callback() {
+	log.debug "callback()>> params: $params, params.code ${params.code}"
 
-				state.vendorRefreshToken = data.refresh_token
-				state.vendorAccessToken = data.access_token
-				state.vendorTokenExpires = now() + (data.expires_in * 1000)
-				return
+	def code = params.code
+	def oauthState = params.state
+
+	if (oauthState == state.oauthInitState) {
+
+		def tokenParams = [
+			client_secret: getClientSecret(),
+			client_id : getClientId(),
+			grant_type: "authorization_code",
+			redirect_uri: getCallbackUrl(),
+			code: code,
+			scope: "read_station"
+		]
+
+		log.debug "TOKEN URL: ${getVendorTokenPath() + toQueryString(tokenParams)}"
+
+		def tokenUrl = getVendorTokenPath()
+		def params = [
+			uri: tokenUrl,
+			contentType: 'application/x-www-form-urlencoded',
+			body: tokenParams
+		]
+
+		log.debug "PARAMS: ${params}"
+
+		httpPost(params) { resp ->
+
+			def slurper = new JsonSlurper()
+
+			resp.data.each { key, value ->
+				def data = slurper.parseText(key)
+
+				state.refreshToken = data.refresh_token
+				state.authToken = data.access_token
+				state.tokenExpires = now() + (data.expires_in * 1000)
+				log.debug "swapped token: $resp.data"
 			}
-
 		}
-	} catch (Exception e) {
-		log.debug "Error: $e"
+
+		// Handle success and failure here, and render stuff accordingly
+		if (state.authToken) {
+			success()
+		} else {
+			fail()
+		}
+
+	} else {
+		log.error "callback() failed oauthState != state.oauthInitState"
 	}
+}
 
-	log.debug "State: $state"
+def success() {
+	log.debug "in success"
+	def message = """
+	<p>We have located your """ + getVendorName() + """ account.</p>
+	<p>Tap 'Done' to continue to Devices.</p>
+	"""
+	connectionStatus(message)
+}
 
-	if ( !state.vendorAccessToken ) {  //We didn't get an access token, bail on install
-		return
+def fail() {
+	log.debug "in fail"
+	def message = """
+	<p>The connection could not be established!</p>
+	<p>Click 'Done' to return to the menu.</p>
+	"""
+	connectionStatus(message)
+}
+
+def connectionStatus(message, redirectUrl = null) {
+	def redirectHtml = ""
+	if (redirectUrl) {
+		redirectHtml = """
+			<meta http-equiv="refresh" content="3; url=${redirectUrl}" />
+		"""
 	}
 
-	/* OAuth Step 3: Use the access token to call into the vendor API throughout your code using state.vendorAccessToken. */
-
 	def html = """
-        <!DOCTYPE html>
-        <html>
-        <head>
-        <meta name="viewport" content="width=device-width, initial-scale=1">
-        <title>${getVendorName()} Connection</title>
-        <style type="text/css">
-            * { box-sizing: border-box; }
-            @font-face {
-                font-family: 'Swiss 721 W01 Thin';
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
-                font-weight: normal;
-                font-style: normal;
-            }
-            @font-face {
-                font-family: 'Swiss 721 W01 Light';
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
-                font-weight: normal;
-                font-style: normal;
-            }
-            .container {
-                width: 100%;
-                padding: 40px;
-                /*background: #eee;*/
-                text-align: center;
-            }
-            img {
-                vertical-align: middle;
-            }
-            img:nth-child(2) {
-                margin: 0 30px;
-            }
-            p {
-                font-size: 2.2em;
-                font-family: 'Swiss 721 W01 Thin';
-                text-align: center;
-                color: #666666;
-                margin-bottom: 0;
-            }
-        /*
-            p:last-child {
-                margin-top: 0px;
-            }
-        */
-            span {
-                font-family: 'Swiss 721 W01 Light';
-            }
-        </style>
-        </head>
-        <body>
-            <div class="container">
-                <img src=""" + getVendorIcon() + """ alt="Vendor icon" />
-                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
-                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
-                <p>We have located your """ + getVendorName() + """ account.</p>
-                <p>Tap 'Done' to process your credentials.</p>
+		<!DOCTYPE html>
+		<html>
+		<head>
+		<meta name="viewport" content="width=device-width, initial-scale=1">
+		<title>${getVendorName()} Connection</title>
+		<style type="text/css">
+			* { box-sizing: border-box; }
+			@font-face {
+				font-family: 'Swiss 721 W01 Thin';
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+				font-weight: normal;
+				font-style: normal;
+			}
+			@font-face {
+				font-family: 'Swiss 721 W01 Light';
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+				font-weight: normal;
+				font-style: normal;
+			}
+			.container {
+				width: 100%;
+				padding: 40px;
+				/*background: #eee;*/
+				text-align: center;
+			}
+			img {
+				vertical-align: middle;
+			}
+			img:nth-child(2) {
+				margin: 0 30px;
+			}
+			p {
+				font-size: 2.2em;
+				font-family: 'Swiss 721 W01 Thin';
+				text-align: center;
+				color: #666666;
+				margin-bottom: 0;
+			}
+			/*
+			p:last-child {
+				margin-top: 0px;
+			}
+			*/
+			span {
+				font-family: 'Swiss 721 W01 Light';
+				}
+		</style>
+		</head>
+		<body>
+			<div class="container">
+				<img src=""" + getVendorIcon() + """ alt="Vendor icon" />
+				<img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
+				<img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
+				${message}
 			</div>
         </body>
         </html>
-        """
+	"""
 	render contentType: 'text/html', data: html
 }
 
-def receivedToken() {
-	log.debug "In receivedToken"
-
-	def html = """
-        <!DOCTYPE html>
-        <html>
-        <head>
-        <meta name="viewport" content="width=device-width, initial-scale=1">
-        <title>Withings Connection</title>
-        <style type="text/css">
-            * { box-sizing: border-box; }
-            @font-face {
-                font-family: 'Swiss 721 W01 Thin';
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
-                font-weight: normal;
-                font-style: normal;
-            }
-            @font-face {
-                font-family: 'Swiss 721 W01 Light';
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
-                font-weight: normal;
-                font-style: normal;
-            }
-            .container {
-                width: 560px;
-                padding: 40px;
-                /*background: #eee;*/
-                text-align: center;
-            }
-            img {
-                vertical-align: middle;
-            }
-            img:nth-child(2) {
-                margin: 0 30px;
-            }
-            p {
-                font-size: 2.2em;
-                font-family: 'Swiss 721 W01 Thin';
-                text-align: center;
-                color: #666666;
-                margin-bottom: 0;
-            }
-        /*
-            p:last-child {
-                margin-top: 0px;
-            }
-        */
-            span {
-                font-family: 'Swiss 721 W01 Light';
-            }
-        </style>
-        </head>
-        <body>
-            <div class="container">
-                <img src=""" + getVendorIcon() + """ alt="Vendor icon" />
-                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
-                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
-                <p>Tap 'Done' to continue to Devices.</p>
-			</div>
-        </body>
-        </html>
-        """
-	render contentType: 'text/html', data: html
-}
-
-// "
-
 def refreshToken() {
 	log.debug "In refreshToken"
 
@@ -308,8 +275,8 @@ def refreshToken() {
 		client_secret: getClientSecret(),
 		client_id: getClientId(),
 		grant_type: "refresh_token",
-		refresh_token: state.vendorRefreshToken
-		]
+		refresh_token: state.refreshToken
+	]
 
 	def tokenUrl = getVendorTokenPath()
 	def params = [
@@ -318,7 +285,7 @@ def refreshToken() {
 		body: oauthParams,
 	]
 
-	/* OAuth Step 2: Request access token with our client Secret and OAuth "Code" */
+	// OAuth Step 2: Request access token with our client Secret and OAuth "Code"
 	try {
 		httpPost(params) { response ->
 			def slurper = new JsonSlurper();
@@ -327,9 +294,9 @@ def refreshToken() {
 				def data = slurper.parseText(key);
 				log.debug "Data: $data"
 
-				state.vendorRefreshToken = data.refresh_token
-				state.vendorAccessToken = data.access_token
-				state.vendorTokenExpires = now() + (data.expires_in * 1000)
+				state.refreshToken = data.refresh_token
+				state.accessToken = data.access_token
+				state.tokenExpires = now() + (data.expires_in * 1000)
 				return true
 			}
 
@@ -338,9 +305,8 @@ def refreshToken() {
 		log.debug "Error: $e"
 	}
 
-	log.debug "State: $state"
-
-	if ( !state.vendorAccessToken ) {  //We didn't get an access token
+	// We didn't get an access token
+	if ( !state.accessToken ) {
 		return false
 	}
 }
@@ -371,10 +337,10 @@ def initialize() {
 
 	settings.devices.each {
 		def deviceId = it
-		def detail = state.deviceDetail[deviceId]
+		def detail = state?.deviceDetail[deviceId]
 
 		try {
-			switch(detail.type) {
+			switch(detail?.type) {
 				case 'NAMain':
 					log.debug "Base station"
 					createChildDevice("Netatmo Basestation", deviceId, "${detail.type}.${deviceId}", detail.module_name)
@@ -482,13 +448,13 @@ def listDevices() {
 }
 
 def apiGet(String path, Map query, Closure callback) {
-	if(now() >= state.vendorTokenExpires) {
+	if(now() >= state.tokenExpires) {
 		refreshToken();
 	}
 
-	query['access_token'] = state.vendorAccessToken
+	query['access_token'] = state.accessToken
 	def params = [
-		uri: apiUrl(),
+		uri: getApiUrl(),
 		path: path,
 		'query': query
 	]
@@ -521,12 +487,12 @@ def poll() {
     log.debug "State: ${state.deviceState}"
 
 	settings.devices.each { deviceId ->
-		def detail = state.deviceDetail[deviceId]
-		def data = state.deviceState[deviceId]
-		def child = children.find { it.deviceNetworkId == deviceId }
+		def detail = state?.deviceDetail[deviceId]
+		def data = state?.deviceState[deviceId]
+		def child = children?.find { it.deviceNetworkId == deviceId }
 
 		log.debug "Update: $child";
-		switch(detail.type) {
+		switch(detail?.type) {
 			case 'NAMain':
 				log.debug "Updating NAMain $data"
 				child?.sendEvent(name: 'temperature', value: cToPref(data['Temperature']) as float, unit: getTemperatureScale())

smartapps/osotech/plantlink-connector.src/plantlink-connector.groovy

@@ -370,9 +370,7 @@ def parse_api_response(resp, message) {
     }
 }
 
-def getServerUrl() { 
-	return "https://graph.api.smartthings.com" 
-}
+def getServerUrl() { return getApiServerUrl() }
 
 def debugEvent(message, displayEvent) {
     def results = [

smartapps/roomieremote-roomieconnect/simple-control.src/simple-control.groovy

@@ -21,6 +21,12 @@ preferences()
 	section("Allow Simple Control to Monitor and Control These Things...")
     {
     	input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
+    	input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
+        input "thermostats", "capability.thermostat", title: "Which Thermostats?", multiple: true, required: false
+        input "doorControls", "capability.doorControl", title: "Which Door Controls?", multiple: true, required: false
+        input "colorControls", "capability.colorControl", title: "Which Color Controllers?", multiple: true, required: false
+        input "musicPlayers", "capability.musicPlayer", title: "Which Music Players?", multiple: true, required: false
+        input "switchLevels", "capability.switchLevel", title: "Which Adjustable Switches?", multiple: true, required: false
   	}
 	
 	page(name: "mainPage", title: "Simple Control Setup", content: "mainPage", refreshTimeout: 5)
@@ -31,12 +37,17 @@ preferences()
 
 mappings {
 	path("/devices") {
+    	action: [
+        	GET: "getDevices"
+        ]
+	}
+    path("/:deviceType/devices") {
     	action: [
         	GET: "getDevices",
             POST: "handleDevicesWithIDs"
         ]
-	}
-    path("/device/:id") {
+    }
+    path("/device/:deviceType/:id") {
     	action: [
         	GET: "getDevice",
             POST: "updateDevice"
@@ -93,33 +104,40 @@ def handleDevicesWithIDs()
     //log.debug("ids: ${ids}")
     def command = data?.command
 	def arguments = data?.arguments
+	def type = params?.deviceType
+    //log.debug("device type: ${type}")
     if (command)
     {
-    	def success = false
+    	def statusCode = 404
 	    //log.debug("command ${command}, arguments ${arguments}")
     	for (devId in ids)
         {
 			def device = allDevices.find { it.id == devId }
-			if (device) {
-				if (arguments) {
+            //log.debug("device: ${device}")
+			// Check if we have a device that responds to the specified command
+			if (validateCommand(device, type, command)) {
+            	if (arguments) {
 					device."$command"(*arguments)
-				} else {
-					device."$command"()
-				}
-				success = true
+                }
+                else {
+                	device."$command"()
+                }
+				statusCode = 200
 			} else {
-            	//log.debug("device not found ${devId}")
+            	statusCode = 403
 			}
 		}
-        
-        if (success)
+        def responseData = "{}"
+        switch (statusCode)
         {
-        	render status: 200, data: "{}"
-        }
-        else
-        {
-        	render status: 404, data: '{"msg": "Device not found"}'
+        	case 403:
+            	responseData = '{"msg": "Access denied. This command is not supported by current capability."}'
+                break
+			case 404:
+            	responseData = '{"msg": "Device not found"}'
+                break
         }
+        render status: statusCode, data: responseData
     }
     else
     {
@@ -164,25 +182,101 @@ def updateDevice()
 	def data = request.JSON
 	def command = data?.command
 	def arguments = data?.arguments
+	def type = params?.deviceType
+    //log.debug("device type: ${type}")
 
 	//log.debug("updateDevice, params: ${params}, request: ${data}")
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
+		def statusCode = 404
 		def device = allDevices.find { it.id == params.id }
 		if (device) {
-			if (arguments) {
-				device."$command"(*arguments)
+			// Check if we have a device that responds to the specified command
+			if (validateCommand(device, type, command)) {
+	        	if (arguments) {
+					device."$command"(*arguments)
+	            }
+	            else {
+	            	device."$command"()
+	            }
+				statusCode = 200
 			} else {
-				device."$command"()
+	        	statusCode = 403
 			}
-			render status: 204, data: "{}"
-		} else {
-			render status: 404, data: '{"msg": "Device not found"}'
 		}
+		
+	    def responseData = "{}"
+	    switch (statusCode)
+	    {
+	    	case 403:
+	        	responseData = '{"msg": "Access denied. This command is not supported by current capability."}'
+	            break
+			case 404:
+	        	responseData = '{"msg": "Device not found"}'
+	            break
+	    }
+	    render status: statusCode, data: responseData
 	}
 }
 
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, deviceType, command) {
+	//log.debug("validateCommand ${command}")
+    def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+    //log.debug("capabilityCommands: ${capabilityCommands}")
+	def currentDeviceCapability = getCapabilityName(deviceType)
+    //log.debug("currentDeviceCapability: ${currentDeviceCapability}")
+	if (capabilityCommands[currentDeviceCapability]) {
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
+	}
+}
+
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(type) {
+    switch(type) {
+		case "switches":
+			return "Switch"
+		case "locks":
+			return "Lock"
+        case "thermostats":
+        	return "Thermostat"
+        case "doorControls":
+        	return "Door Control"
+        case "colorControls":
+        	return "Color Control"
+        case "musicPlayers":
+        	return "Music Player"
+        case "switchLevels":
+        	return "Switch Level"
+		default:
+			return type
+	}
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
 def listSubscriptions()
 {
 	//log.debug "listSubscriptions()"
@@ -361,7 +455,13 @@ def agentDiscovery(params=[:])
         }
         section("Allow Simple Control to Monitor and Control These Things...")
         {
-	    	input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
+			input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
+			input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
+			input "thermostats", "capability.thermostat", title: "Which Thermostats?", multiple: true, required: false
+			input "doorControls", "capability.doorControl", title: "Which Door Controls?", multiple: true, required: false
+			input "colorControls", "capability.colorControl", title: "Which Color Controllers?", multiple: true, required: false
+			input "musicPlayers", "capability.musicPlayer", title: "Which Music Players?", multiple: true, required: false
+			input "switchLevels", "capability.switchLevel", title: "Which Adjustable Switches?", multiple: true, required: false
 	  	}
     }
 }
@@ -672,5 +772,3 @@ def List getRealHubFirmwareVersions()
 }
 
 
-
-

smartapps/smartthings/button-controller.src/button-controller.groovy

@@ -297,8 +297,8 @@ private getTimeOk() {
 	def result = true
 	if (starting && ending) {
 		def currTime = now()
-		def start = timeToday(starting).time
-		def stop = timeToday(ending).time
+		def start = timeToday(starting, location.timeZone).time
+		def stop = timeToday(ending, location.timeZone).time
 		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
 	}
 	log.trace "timeOk = $result"

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -39,6 +39,7 @@ preferences {
 	page(name: "completionPage")
 	page(name: "numbersPage")
 	page(name: "controllerExplanationPage")
+	page(name: "unsupportedDevicesPage")
 }
 
 def rootPage() {
@@ -47,6 +48,9 @@ def rootPage() {
 		section("What to dim") {
 			input(name: "dimmers", type: "capability.switchLevel", title: "Dimmers", description: null, multiple: true, required: true, submitOnChange: true)
 			if (dimmers) {
+				if (dimmersContainUnsupportedDevices()) {
+					href(name: "toUnsupportedDevicesPage", page: "unsupportedDevicesPage", title: "Some of your selected dimmers don't seem to be supported", description: "Tap here to fix it", required: true)
+				}
 				href(name: "toNumbersPage", page: "numbersPage", title: "Duration & Direction", description: numbersPageHrefDescription(), state: "complete")
 			}
 		}
@@ -71,6 +75,31 @@ def rootPage() {
 	}
 }
 
+def unsupportedDevicesPage() {
+
+	def unsupportedDimmers = dimmers.findAll { !hasSetLevelCommand(it) }
+
+	dynamicPage(name: "unsupportedDevicesPage") {
+		if (unsupportedDimmers) {
+			section("These devices do not support the setLevel command") {
+				unsupportedDimmers.each {
+					paragraph deviceLabel(it)
+				}
+			}
+			section {
+				input(name: "dimmers", type: "capability.sensor", title: "Please remove the above devices from this list.", submitOnChange: true, multiple: true)
+			}
+			section {
+				paragraph "If you think there is a mistake here, please contact support."
+			}
+		} else {
+			section {
+				paragraph "You're all set. You can hit the back button, now. Thanks for cleaning up your settings :)"
+			}
+		}
+	}
+}
+
 def controllerExplanationPage() {
 	dynamicPage(name: "controllerExplanationPage", title: "How To Control Gentle Wake Up") {
 
@@ -528,14 +557,16 @@ def updateDimmers(percentComplete) {
 		} else {
 
 			def shouldChangeColors = (colorize && colorize != "false")
-			def canChangeColors = hasSetColorCommand(dimmer)
 
-			log.debug "Setting ${deviceLabel(dimmer)} to ${nextLevel}"
-
-			if (shouldChangeColors && canChangeColors) {
-				dimmer.setColor([hue: getHue(dimmer, nextLevel), saturation: 100, level: nextLevel])
-			} else {
+			if (shouldChangeColors && hasSetColorCommand(dimmer)) {
+				def hue = getHue(dimmer, nextLevel)
+				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel} and hue to ${hue}"
+				dimmer.setColor([hue: hue, saturation: 100, level: nextLevel])
+			} else if (hasSetLevelCommand(dimmer)) {
+				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel}"
 				dimmer.setLevel(nextLevel)
+			} else {
+				log.warn "${deviceLabel(dimmer)} does not have setColor or setLevel commands."
 			}
 
 		}
@@ -689,7 +720,7 @@ def completionPercentage() {
 
 	def now = new Date().getTime()
 	def timeElapsed = now - atomicState.start
-	def totalRunTime = totalRunTimeMillis()
+	def totalRunTime = totalRunTimeMillis() ?: 1
 	def percentComplete = timeElapsed / totalRunTime * 100
 	log.debug "percentComplete: ${percentComplete}"
 
@@ -817,24 +848,21 @@ private getRedHue(level) {
 	if (level >= 96) return 17
 }
 
+private dimmersContainUnsupportedDevices() {
+	def found = dimmers.find { hasSetLevelCommand(it) == false }
+	return found != null
+}
+
 private hasSetLevelCommand(device) {
-	def isDimmer = false
-	device.supportedCommands.each {
-		if (it.name.contains("setLevel")) {
-			isDimmer = true
-		}
-	}
-	return isDimmer
+	return hasCommand(device, "setLevel")
 }
 
 private hasSetColorCommand(device) {
-	def hasColor = false
-	device.supportedCommands.each {
-		if (it.name.contains("setColor")) {
-			hasColor = true
-		}
-	}
-	return hasColor
+	return hasCommand(device, "setColor")
+}
+
+private hasCommand(device, String command) {
+	return (device.supportedCommands.find { it.name == command } != null)
 }
 
 private dimmersWithSetColorCommand() {
@@ -1073,4 +1101,4 @@ def hasStartLevel() {
 
 def hasEndLevel() {
 	return (endLevel != null && endLevel != "")
-}
+}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -30,6 +30,7 @@ definition(
 preferences {
 	page(name:"mainPage", title:"Hue Device Setup", content:"mainPage", refreshTimeout:5)
 	page(name:"bridgeDiscovery", title:"Hue Bridge Discovery", content:"bridgeDiscovery", refreshTimeout:5)
+	page(name:"bridgeDiscoveryFailed", title:"Bridge Discovery Failed", content:"bridgeDiscoveryFailed", refreshTimeout:0)
 	page(name:"bridgeBtnPush", title:"Linking with your Hue", content:"bridgeLinking", refreshTimeout:5)
 	page(name:"bulbDiscovery", title:"Hue Device Setup", content:"bulbDiscovery", refreshTimeout:5)
 }
@@ -53,12 +54,21 @@ def bridgeDiscovery(params=[:])
 	def options = bridges ?: []
 	def numFound = options.size() ?: 0
 
-	if (numFound == 0 && state.bridgeRefreshCount > 25) {
-    	log.trace "Cleaning old bridges memory"
-    	state.bridges = [:]
-        state.bridgeRefreshCount = 0
-        app.updateSetting("selectedHue", "")
-    }
+	if (numFound == 0) {
+		if (state.bridgeRefreshCount == 25) {
+			log.trace "Cleaning old bridges memory"
+			state.bridges = [:]
+			app.updateSetting("selectedHue", "")
+		} else if (state.bridgeRefreshCount > 100) {
+			// five minutes have passed, give up
+			// there seems to be a problem going back from discovey failed page in some instances (compared to pressing next)
+			// however it is probably a SmartThings settings issue
+			state.bridges = [:]
+			app.updateSetting("selectedHue", "")
+			state.bridgeRefreshCount = 0
+			return bridgeDiscoveryFailed()
+		}
+	}
 
 	ssdpSubscribe()
 
@@ -79,6 +89,13 @@ def bridgeDiscovery(params=[:])
 	}
 }
 
+def bridgeDiscoveryFailed() {
+	return dynamicPage(name:"bridgeDiscoveryFailed", title: "Bridge Discovery Failed", nextPage: "bridgeDiscovery") {
+		section("Failed to discover any Hue Bridges. Please confirm that the Hue Bridge is connected to the same network as your SmartThings Hub, and that it has power.") {
+		}
+	}
+}
+
 def bridgeLinking()
 {
 	int linkRefreshcount = !state.linkRefreshcount ? 0 : state.linkRefreshcount as int
@@ -88,19 +105,15 @@ def bridgeLinking()
 	def nextPage = ""
 	def title = "Linking with your Hue"
     def paragraphText
-    def hueimage = null
 	if (selectedHue) {
 		paragraphText = "Press the button on your Hue Bridge to setup a link. "
-        hueimage = "http://huedisco.mediavibe.nl/wp-content/uploads/2013/09/pair-bridge.png"
     } else {
     	paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
-        hueimage = null
     }
 	if (state.username) { //if discovery worked
 		nextPage = "bulbDiscovery"
 		title = "Success!"
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
-        hueimage = null
 	}
 
 	if((linkRefreshcount % 2) == 0 && !state.username) {
@@ -110,8 +123,6 @@ def bridgeLinking()
 	return dynamicPage(name:"bridgeBtnPush", title:title, nextPage:nextPage, refreshInterval:refreshInterval) {
 		section("") {
 			paragraph """${paragraphText}"""
-            if (hueimage != null)
-            	image "${hueimage}"
 		}
 	}
 }
@@ -135,13 +146,14 @@ def bulbDiscovery() {
 	if((bulbRefreshCount % 5) == 0) {
 		discoverHueBulbs()
 	}
+	def selectedBridge = state.bridges.find { key, value -> value?.serialNumber?.equalsIgnoreCase(selectedHue) }
+	def title = selectedBridge?.value?.name ?: "Find bridges"
 
 	return dynamicPage(name:"bulbDiscovery", title:"Bulb Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 		section("Please wait while we discover your Hue Bulbs. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:bulboptions
 		}
 		section {
-			def title = getBridgeIP() ? "Hue bridge (${getBridgeIP()})" : "Find bridges"
 			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
 
 		}
@@ -323,6 +335,8 @@ private getDeviceType(hueType) {
 		return "Hue Bulb"
 	else if (hueType?.equalsIgnoreCase("Color Light"))
 		return "Hue Bloom"
+	else if (hueType?.equalsIgnoreCase("Color Temperature Light"))
+		return "Hue White Ambiance Bulb"
 	else
 		return null
 }
@@ -332,8 +346,7 @@ private addChildBulb(dni, hueType, name, hub, update=false, device = null) {
 
 	if (deviceType) {
 		return addChildDevice("smartthings", deviceType, dni, hub, ["label": name])
-	}
-	else {
+	} else {
 		log.warn "Device type $hueType not supported"
 		return null
 	}
@@ -347,24 +360,29 @@ def addBulbs() {
 			def newHueBulb
 			if (bulbs instanceof java.util.Map) {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
-                if (newHueBulb != null) {
-                    d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
-                    log.debug "created ${d.displayName} with id $dni"
-                    d.refresh()
-                } else {
-                	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
-                }
+
+				if (newHueBulb != null) {
+					d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
+					if (d) {
+						log.debug "created ${d.displayName} with id $dni"
+						d.completedSetup = true
+						d.refresh()
+					}
+				} else {
+					log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
+				}
 			} else {
-            	//backwards compatable
+			 	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
-                d.refresh()
+				d?.completedSetup = true
+				d?.refresh()
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
 			if (bulbs instanceof java.util.Map) {
 				// Update device type if incorrect
-            	def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
+				def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
 				upgradeDeviceType(d, newHueBulb?.value?.type)
 			}
 		}
@@ -396,6 +414,7 @@ def addBridge() {
             }
         	if (newbridge) {
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub)
+				d?.completedSetup = true
  				log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
                 def childDevice = getChildDevice(d.deviceNetworkId)
                 childDevice.sendEvent(name: "serialNumber", value: vbridge.value.serialNumber)
@@ -483,7 +502,21 @@ void bridgeDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
 		def bridges = getHueBridges()
 		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
 		if (bridge) {
-			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
+			// serialNumber from API is in format of 0017882413ad (mac address), however on the actual bridge only last six
+			// characters are printed on the back so using that to identify bridge
+			def idNumber = body?.device?.serialNumber?.text()
+			if (idNumber?.size() >= 6)
+				idNumber = idNumber[-6..-1].toUpperCase()
+
+			// usually in form of bridge name followed by (ip), i.e. defaults to Philips Hue (192.168.1.2)
+			// replace IP with serial number to make it easier for user to identify
+			def name = body?.device?.friendlyName?.text()
+			def index = name?.indexOf('(')
+			if (index != -1) {
+				name = name.substring(0,index)
+				name += " ($idNumber)"
+			}
+			bridge.value << [name:name, serialNumber:body?.device?.serialNumber?.text(), verified: true]
 		} else {
 			log.error "/description.xml returned a bridge that didn't exist"
 		}
@@ -656,7 +689,7 @@ def parse(childDevice, description) {
             	log.warn "Parsing Body failed - trying again..."
                 poll()
             }
-            if (body instanceof java.util.HashMap) {
+            if (body instanceof java.util.Map) {
             	//poll response
                 def bulbs = getChildDevices()
                 for (bulb in body) {
@@ -797,22 +830,22 @@ def setColorTemperature(childDevice, huesettings) {
 
 def setColor(childDevice, huesettings) {
     log.debug "Executing 'setColor($huesettings)'"
-    
+
     def value = [:]
     def hue = null
     def sat = null
     def xy = null
-    
+
     if (huesettings.hex != null) {
         value.xy = getHextoXY(huesettings.hex)
     } else {
         if (huesettings.hue != null)
             value.hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
-        if (huesettings.saturation != null)   
+        if (huesettings.saturation != null)
             value.sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
     }
-    
-    // Default behavior is to turn light on 
+
+    // Default behavior is to turn light on
     value.on = true
 
     if (huesettings.level != null) {
@@ -820,7 +853,7 @@ def setColor(childDevice, huesettings) {
             value.on = false
         else if (huesettings.level == 1)
             value.bri = 1
-        else 
+        else
             value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
     }
     value.alert = huesettings.alert ? huesettings.alert : "none"

smartapps/smartthings/ifttt.src/ifttt.groovy

@@ -131,19 +131,69 @@ def update() {
 	def type = params.deviceType
 	def data = request.JSON
 	def devices = settings[type]
+	def device = settings[type]?.find { it.id == params.id }
 	def command = data.command
 
 	log.debug "[PROD] update, params: ${params}, request: ${data}, devices: ${devices*.id}"
-	if (command) {
-		def device = devices?.find { it.id == params.id }
-		if (!device) {
-			httpError(404, "Device not found")
-		} else {
-			device."$command"()
-		}
+	
+	if (!device) {
+		httpError(404, "Device not found")
+	} 
+	
+	if (validateCommand(device, type, command)) {
+		device."$command"()
+	} else {
+		httpError(403, "Access denied. This command is not supported by current capability.")
 	}
 }
 
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, deviceType, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(deviceType)
+	if (capabilityCommands[currentDeviceCapability]) {
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
+	}
+}
+
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(type) {
+    switch(type) {
+		case "switches":
+			return "Switch"
+		case "alarms":
+			return "Alarm"
+		case "locks":
+			return "Lock"
+		default:
+			return type
+	}
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
+
 def show() {
 	def type = params.deviceType
 	def devices = settings[type]

smartapps/smartthings/its-too-cold.src/its-too-cold.groovy

@@ -73,7 +73,8 @@ def temperatureHandler(evt) {
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
 			log.debug "Temperature dropped below $tooCold:  sending SMS to $phone1 and activating $mySwitch"
-			send("${temperatureSensor1.displayName} is too cold, reporting a temperature of ${evt.value}${evt.unit?:"F"}")
+			def tempScale = location.temperatureScale ?: "F"
+			send("${temperatureSensor1.displayName} is too cold, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
 			switch1?.on()
 		}
 	}

smartapps/smartthings/its-too-hot.src/its-too-hot.groovy

@@ -73,7 +73,8 @@ def temperatureHandler(evt) {
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
 			log.debug "Temperature rose above $tooHot:  sending SMS to $phone1 and activating $mySwitch"
-			send("${temperatureSensor1.displayName} is too hot, reporting a temperature of ${evt.value}${evt.unit?:"F"}")
+			def tempScale = location.temperatureScale ?: "F"
+			send("${temperatureSensor1.displayName} is too hot, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
 			switch1?.on()
 		}
 	}

smartapps/smartthings/life360-connect.src/life360-connect.groovy

@@ -27,7 +27,6 @@ definition(
 ) {
 	appSetting "clientId"
 	appSetting "clientSecret"
-    appSetting "serverUrl"
 }
 
 preferences {
@@ -192,7 +191,7 @@ def getSmartThingsClientId() {
    return "pREqugabRetre4EstetherufrePumamExucrEHuc"
 }
 
-def getServerUrl() { appSettings.serverUrl }
+def getServerUrl() { getApiServerUrl() }
 
 def buildRedirectUrl()
 {

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -339,7 +339,7 @@ def initialize() {
 	state.aux = 0
 	if (selectedhubs || selectedactivities) {
 		addDevice()
-        runEvery5Minutes("discovery")
+        runEvery5Minutes("poll")
 	}
 }
 
@@ -394,9 +394,9 @@ def discovery() {
         }
 	} catch (java.net.SocketTimeoutException e) {
 		log.warn "Connection to the hub timed out. Please restart the hub and try again."
-        state.resethub = true
+    state.resethub = true
  	} catch (e) {
-		log.warn "Hostname in certificate didn't match. Please try again later."
+    log.info "Logitech Harmony - Error: $e"
 	}
     return null
 }
@@ -474,7 +474,7 @@ def activity(dni,mode) {
 def poll() {
 	// GET THE LIST OF ACTIVITIES
     if (state.HarmonyAccessToken) {
-    	getActivityList()
+    	  getActivityList()
         def Params = [auth: state.HarmonyAccessToken]
         def url = "https://home.myharmony.com/cloudapi/state?${toQueryString(Params)}"
         try {
@@ -520,14 +520,17 @@ def poll() {
                 return "Poll completed $map - $state.hubs"
             }
         } catch (groovyx.net.http.HttpResponseException e) {
-            if (e.statusCode == 401) { // token is expired
-                state.remove("HarmonyAccessToken")
-                return "Harmony Access token has expired"
-            }
-		} catch(Exception e) {
-        	log.trace e
-		}
-	}
+              if (e.statusCode == 401) { // token is expired
+                  state.remove("HarmonyAccessToken")
+                  log.warn "Harmony Access token has expired"
+              }
+        } catch (java.net.SocketTimeoutException e) {
+        	log.warn "Connection to the hub timed out. Please restart the hub and try again."
+              state.resethub = true
+        } catch (e) {
+        	log.info "Logitech Harmony - Error: $e"
+        }
+    }
 }
 
 
@@ -655,29 +658,73 @@ def updateDevice() {
 	def data = request.JSON
 	def command = data.command
 	def arguments = data.arguments
-
 	log.debug "updateDevice, params: ${params}, request: ${data}"
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
 		def device = allDevices.find { it.id == params.id }
-		if (device) {
-        	if (device.hasCommand("$command")) {
-                if (arguments) {
-                    device."$command"(*arguments)
-                } else {
-                    device."$command"()
-                }
-                render status: 204, data: "{}"
-           	} else {
-				render status: 404, data: '{"msg": "Command not supported by this Device"}'
-			}
-		} else {
-			render status: 404, data: '{"msg": "Device not found"}'
-		}
+    if (device) {
+        if (validateCommand(device, command)) {
+            if (arguments) {
+                device."$command"(*arguments)
+            } else {
+                device."$command"()
+            }
+            render status: 204, data: "{}"
+        } else {
+          render status: 403, data: '{"msg": "Access denied. This command is not supported by current capability."}'
+        }
+    } else {
+      render status: 404, data: '{"msg": "Device not found"}'
+    }
+  }
+}
+
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(device)
+	if (currentDeviceCapability != "" && capabilityCommands[currentDeviceCapability]) {
+    return (command in capabilityCommands[currentDeviceCapability] || (currentDeviceCapability == "Switch" && command == "setLevel" && device.hasCommand("setLevel"))) ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
 	}
 }
 
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(device) {
+    def capName = ""
+    if (switches.find{it.id == device.id})
+			capName = "Switch"
+		else if (alarms.find{it.id == device.id})
+			capName = "Alarm"
+		else if (locks.find{it.id == device.id})
+			capName = "Lock"
+    log.trace "Device: $device - Capability Name: $capName"
+		return capName
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
 def listSubscriptions() {
 	log.debug "listSubscriptions()"
 	app.subscriptions?.findAll { it.device?.device && it.device.id }?.collect {
@@ -776,18 +823,33 @@ def deviceHandler(evt) {
 }
 
 def sendToHarmony(evt, String callbackUrl) {
-	def callback = new URI(callbackUrl)
-	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
-	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
-	sendHubCommand(new physicalgraph.device.HubAction(
-		method: "POST",
-		path: path,
-		headers: [
-			"Host": host,
-			"Content-Type": "application/json"
-		],
-		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
-	))
+  def callback = new URI(callbackUrl)
+  if (callback.port != -1) {
+  	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
+  	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
+  	sendHubCommand(new physicalgraph.device.HubAction(
+  		method: "POST",
+  		path: path,
+  		headers: [
+  			"Host": host,
+  			"Content-Type": "application/json"
+  		],
+  		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
+  	))
+  } else {
+    def params = [
+      uri: callbackUrl,
+      body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
+    ]
+    try {
+        log.debug "Sending data to Harmony Cloud: $params"
+        httpPostJson(params) { resp ->
+            log.debug "Harmony Cloud - Response: ${resp.status}"
+        }
+    } catch (e) {
+        log.error "Harmony Cloud - Something went wrong: $e"
+    }
+  }
 }
 
 def listHubs() {

smartapps/smartthings/ubi.src/ubi.groovy

@@ -107,8 +107,8 @@ mappings {
 	path("/locks") {
 		action: [
 			GET: "listLocks",
-			PUT: "updateLock",
-			POST: "updateLock"
+			PUT: "updateLocks",
+			POST: "updateLocks"
 		]
 	}
 	path("/locks/:id") {
@@ -442,31 +442,87 @@ def executePhrase() {
 }
 
 private void updateAll(devices) {
+	def type = params.param1
 	def command = request.JSON?.command
-	if (command)
-	{
-		command = command.toLowerCase()
-		devices."$command"()
+	if (!devices) {
+		httpError(404, "Devices not found")
+	}
+	if (command){
+		devices.each { device ->
+			executeCommand(device, type, command)
+		}
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
-	//def command = request.JSON?.command
-	def command = params.command
-	if (command)
-	{
-		command = command.toLowerCase()
-		def device = devices.find { it.id == params.id }
-		if (!device)
-		{
+	def type = params.param1
+	def command = request.JSON?.command
+	def device = devices?.find { it.id == params.id }
+
+	if (!device) {
 			httpError(404, "Device not found")
-		}
-		else
-		{
-			device."$command"()
-		}
 	}
+
+	if (command) {
+		executeCommand(device, type, command)
+	}
+}
+
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, deviceType, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(deviceType)
+	if (capabilityCommands[currentDeviceCapability]) {
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
+	}
+}
+
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(type) {
+    switch(type) {
+		case "switches":
+			return "Switch"
+		case "locks":
+			return "Lock"
+		default:
+			return type
+	}
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
+/**
+ * Validates and executes the command
+ * on the device or devices
+ */
+def executeCommand(device, type, command) {
+	if (validateCommand(device, type, command)) {
+		device."$command"()
+	} else {
+		httpError(403, "Access denied. This command is not supported by current capability.")
+	}	
 }
 
 private show(devices, type) {

smartapps/tslagle13/vacation-lighting-director.src/vacation-lighting-director.groovy

@@ -273,7 +273,7 @@ def scheduleCheck(evt) {
     else {
     	if(people){
         	//don't turn off lights if anyone is home
-        	if(someoneIsHome()){
+        	if(someoneIsHome){
         	    log.debug("Stopping Check for Light")
         	    unschedule()
         	}

smartapps/vlaminck/alfred-workflow.src/alfred-workflow.groovy

@@ -92,22 +92,87 @@ void updateLock() {
 
 private void updateAll(devices) {
 	def command = request.JSON?.command
-	if (command) {
-		devices."$command"()
+	def type = params.param1
+	if (!devices) {
+		httpError(404, "Devices not found")
+	}
+	
+	if (command){
+		devices.each { device ->
+			executeCommand(device, type, command)
+		}
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
 	def command = request.JSON?.command
-	if (command) {
-		def device = devices.find { it.id == params.id }
-		if (!device) {
-			httpError(404, "Device not found")
-		} else {
-			device."$command"()
-		}
+	def type = params.param1
+	def device = devices?.find { it.id == params.id }
+
+	if (!device) {
+		httpError(404, "Device not found")
 	}
+
+	if (command) {
+		executeCommand(device, type, command)
+	}
+}
+
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, deviceType, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(deviceType)
+	if (capabilityCommands[currentDeviceCapability]) {
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
+	}
+}
+
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(type) {
+    switch(type) {
+		case "switches":
+			return "Switch"
+		case "locks":
+			return "Lock"
+		default:
+			return type
+	}
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
+/**
+ * Validates and executes the command
+ * on the device or devices
+ */
+def executeCommand(device, type, command) {
+	if (validateCommand(device, type, command)) {
+		device."$command"()
+	} else {
+		httpError(403, "Access denied. This command is not supported by current capability.")
+	}	
 }
 
 private show(devices, name) {