MSA-1306: test

MSA-1255: Gidjit - Smart Launcher with SmartThings support

devicetypes/smartthings/-.src/-.groovy

@@ -0,0 +1,294 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "재부재 센서", namespace: "smartthings", author: "김성훈") {
+		capability "Tone"
+		capability "Actuator"
+		capability "Signal Strength"
+		capability "Presence Sensor"
+		capability "Sensor"
+		capability "Battery"
+
+		fingerprint profileId: "FC01", deviceId: "019A"
+		fingerprint profileId: "FC01", deviceId: "0131", inClusters: "0000,0003", outClusters: "0003"
+		fingerprint profileId: "FC01", deviceId: "0131", inClusters: "0000", outClusters: "0006"
+	}
+
+	simulator {
+		status "present": "presence: 1"
+		status "not present": "presence: 0"
+		status "battery": "battery: 27, batteryDivisor: 0A, rssi: 100, lqi: 64"
+	}
+
+	preferences {
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Arrival/Arrival1.jpg",
+				"http://cdn.device-gse.smartthings.com/Arrival/Arrival2.jpg"
+				])
+		}
+	}
+
+	tiles {
+		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
+			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
+			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ebeef2"
+		}
+		standardTile("beep", "device.beep", decoration: "flat") {
+			state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
+			state "battery", label:'${currentValue}% battery', unit:""/*, backgroundColors:[
+				[value: 5, color: "#BC2323"],
+				[value: 10, color: "#D04E00"],
+				[value: 15, color: "#F1D801"],
+				[value: 16, color: "#FFFFFF"]
+			]*/
+		}
+		/*
+		valueTile("lqi", "device.lqi", decoration: "flat", inactiveLabel: false) {
+			state "lqi", label:'${currentValue}% signal', unit:""
+		}
+		*/
+		
+		main "presence"
+		details(["presence", "beep", "battery"/*, "lqi"*/])
+	}
+}
+
+def beep() {
+	/*
+	You can make the speaker turn on for 0.5-second beeps by sending some CLI commands:
+
+		Command: send raw, wait 7, send raw, wait 7, send raw
+		Future: new packet type "st.beep"
+
+		raw 0xFC05 {15 0A 11 00 00 15 01}
+		send 0x2F7F 2 2
+
+	where "0xABCD" is the node ID of the Smart Tag, everything else above is a constant. Except
+	the "15 01" at the end of the first raw command, that sets the speaker's period (reciprocal
+	of frequency). You can play with this value up or down to experiment with loudness as the
+	loudness will be strongly dependent upon frequency and the enclosure that it's in. Note that
+	"15 01" represents the hex number 0x0115 so a lower frequency is "16 01" (longer period) and
+	a higher frequency is "14 01" (shorter period). Note that since the tag only checks its parent
+	for messages every 5 seconds (while at rest) or every 3 seconds (while in motion) it will take
+	up to this long from the time you send the message to the time you hear a sound.
+	*/
+
+	[
+		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 7000",
+		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 7000",
+		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 7000",
+		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 7000",
+		"raw 0xFC05 {15 0A 11 00 00 15 01}"
+	]
+}
+
+def parse(String description) {
+	def results
+	if (isBatteryMessage(description)) {
+		results = parseBatteryMessage(description)
+	}
+	else {
+		results = parsePresenceMessage(description)
+	}
+
+	log.debug "Parse returned $results.descriptionText"
+	results
+}
+
+private Map parsePresenceMessage(String description) {
+	def name = parseName(description)
+	def value = parseValue(description)
+	def linkText = getLinkText(device)
+	def descriptionText = parseDescriptionText(linkText, value, description)
+	def handlerName = getState(value)
+	def isStateChange = isStateChange(device, name, value)
+
+	def results = [
+		name: name,
+		value: value,
+		unit: null,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: handlerName,
+		isStateChange: isStateChange,
+		displayed: displayed(description, isStateChange)
+	]
+
+	results
+}
+
+private String parseName(String description) {
+	if (description?.startsWith("presence: ")) {
+		return "presence"
+	}
+	null
+}
+
+private String parseValue(String description) {
+	if (description?.startsWith("presence: "))
+	{
+		if (description?.endsWith("1"))
+		{
+			return "present"
+		}
+		else if (description?.endsWith("0"))
+		{
+			return "not present"
+		}
+	}
+
+	description
+}
+
+private parseDescriptionText(String linkText, String value, String description) {
+	switch(value) {
+		case "present": return "$linkText has arrived"
+		case "not present": return "$linkText has left"
+		default: return value
+	}
+}
+
+private getState(String value) {
+	def state = value
+	if (value == "present") {
+		state = "arrived"
+	}
+	else if (value == "not present") {
+		state = "left"
+	}
+
+	state
+}
+
+private Boolean isBatteryMessage(String description) {
+	// "raw:36EF1C, dni:36EF, battery:1B, rssi:, lqi:"
+	description ==~ /.*battery:.*rssi:.*lqi:.*/
+}
+
+private List parseBatteryMessage(String description) {
+	def results = []
+	def parts = description.split(',')
+	parts.each { part ->
+		part = part.trim()
+		if (part.startsWith('battery:')) {
+			def batteryResult = getBatteryResult(part, description)
+			if (batteryResult) {
+				results << batteryResult
+			}
+		}
+		else if (part.startsWith('rssi:')) {
+			def rssiResult = getRssiResult(part, description)
+			if (rssiResult) {
+				results << rssiResult
+			}
+		}
+		else if (part.startsWith('lqi:')) {
+			def lqiResult = getLqiResult(part, description)
+			if (lqiResult) {
+				results << lqiResult
+			}
+		}
+	}
+
+	results
+}
+
+private getBatteryResult(part, description) {
+	def batteryDivisor = description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"} ? description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"}.split(":")[1].trim() : null
+	def name = "battery"
+	def value = zigbee.parseSmartThingsBatteryValue(part, batteryDivisor)
+	def unit = "%"
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText battery was ${value}${unit}"
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+		name: name,
+		value: value,
+		unit: unit,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: name,
+		isStateChange: isStateChange,
+		//displayed: displayed(description, isStateChange)
+		displayed: false
+	]
+}
+
+private getRssiResult(part, description) {
+	def name = "rssi"
+	def parts = part.split(":")
+	if (parts.size() != 2) return null
+
+	def valueString = parts[1].trim()
+	def valueInt = Integer.parseInt(valueString, 16)
+	def value = (valueInt - 128).toString()
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText was $value dBm"
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+		name: name,
+		value: value,
+		unit: "dBm",
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: null,
+		isStateChange: isStateChange,
+		//displayed: displayed(description, isStateChange)
+		displayed: false
+	]
+}
+
+/**
+ * Use LQI (Link Quality Indicator) as a measure of signal strength. The values
+ * are 0 to 255 (0x00 to 0xFF) and higher values represent higher signal
+ * strength. Return as a percentage of 255.
+ *
+ * Note: To make the signal strength indicator more accurate, we could combine
+ * LQI with RSSI.
+ */
+private getLqiResult(part, description) {
+	def name = "lqi"
+	def parts = part.split(":")
+	if (parts.size() != 2) return null
+
+	def valueString = parts[1].trim()
+	def valueInt = Integer.parseInt(valueString, 16)
+	def percentageOf = 255
+	def value = Math.round((valueInt / percentageOf * 100)).toString()
+	def unit = "%"
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText Signal (LQI) was ${value}${unit}"
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+		name: name,
+		value: value,
+		unit: unit,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: null,
+		isStateChange: isStateChange,
+		//displayed: displayed(description, isStateChange)
+		displayed: false
+	]
+}

devicetypes/smartthings/aeon-home-energy-meter-c3.src/aeon-home-energy-meter-c3.groovy

@@ -94,11 +94,11 @@ def parse(String description) {
 	def cmd = zwave.parse(description, [0x31: 1, 0x32: 1, 0x60: 3])
 	if (cmd) {
 		result = createEvent(zwaveEvent(cmd))
-		log.debug "Parse returned ${result?.descriptionText}"
-		storeGraphData(result.name, result.value)
-	} else {
-		log.debug "zwave.parse returned null command. Cannot create event"
 	}
+	log.debug "Parse returned ${result?.descriptionText}"
+
+	storeGraphData(result.name, result.value)
+
 	return result
 }
 

smartapps/com-gidjit-smartthings-hub/gidjit-hub.src/gidjit-hub.groovy

@@ -0,0 +1,252 @@
+/**
+ *  Gidjit Hub
+ *
+ *  Copyright 2016 Matthew Page
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Gidjit Hub",
+    namespace: "com.gidjit.smartthings.hub",
+    author: "Matthew Page",
+    description: "Act as an endpoint so user's of Gidjit can quickly access and control their devices and execute routines. Users can do this quickly as Gidjit filters these actions  based on their environment",
+    category: "Convenience",
+    iconUrl: "http://www.gidjit.com/appicon.png",
+    iconX2Url: "http://www.gidjit.com/appicon@2x.png",
+    iconX3Url: "http://www.gidjit.com/appicon@3x.png",
+    oauth: [displayName: "Gidjit", displayLink: "www.gidjit.com"])
+
+
+
+preferences {
+  section ("Allow Gidjit to have access, there by allowing you to quickly control and monitor the following devices") {
+    input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
+    input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
+    input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
+    //input "bulbs", "capability.colorControl", title: "Control your lights", multiple: true, required: false //windowShade
+
+  }
+}
+mappings {
+  path("/structureinfo") {
+    action: [
+      GET: "structureInfo"
+    ]
+  }
+  path("/helloactions") {
+    action: [
+      GET: "helloActions"
+    ]
+  }
+  path("/helloactions/:label") {
+    action: [
+      PUT: "executeAction"
+    ]
+  }
+
+  path("/switch/:id/:command") {
+    action: [
+      PUT: "updateSwitch"
+    ]
+  }
+
+  path("/thermostat/:id/:command") {
+    action: [
+      PUT: "updateThermostat"
+    ]
+  }
+
+  path("/windowshade/:id/:command") {
+    action: [
+      PUT: "updateWindowShade"
+    ]
+  }
+  path("/acquiredata/:id") {
+    action: [
+      GET: "acquiredata"
+    ]
+  }
+}
+
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// subscribe to attributes, devices, locations, etc.
+}
+def helloActions() {
+	def actions = location.helloHome?.getPhrases()*.label
+    if(!actions) {
+    	return []
+    }
+	return actions
+}
+def executeAction() {
+    def actions = location.helloHome?.getPhrases()*.label
+    def a = actions?.find() { it == params.label }
+    if (!a) {
+        httpError(400, "invalid label $params.label")
+        return
+    }
+    location.helloHome?.execute(params.label)
+}
+/*  this is the primary function called to query at the structure and its devices */
+def structureInfo() { //list all devices
+	def list = [:]
+    def currId = location.id
+    list[currId] = [:]
+    list[currId].name = location.name
+    list[currId].id = location.id
+    list[currId].temperatureScale = location.temperatureScale
+    list[currId].devices = [:]
+  
+    def setValues = {
+   		if (params.brief) {
+            return [id: it.id, name: it.displayName]
+        }
+        def newList = [id: it.id, name: it.displayName, suppCapab: it.capabilities.collect {
+            "$it.name"
+        }, suppAttributes: it.supportedAttributes.collect {
+            "$it.name"      
+        }, suppCommands: it.supportedCommands.collect {
+            "$it.name"      
+        }]
+
+        return newList
+    }
+    switches?.each {
+      list[currId].devices[it.id] = setValues(it)
+    }
+    thermostats?.each {
+      list[currId].devices[it.id] = setValues(it)
+    }
+    windowShades?.each {
+      list[currId].devices[it.id] = setValues(it)
+    }
+
+    return list
+
+}
+/*  This function returns all of the current values of the specified Devices attributes */
+def acquiredata() {
+	def resp = [:]
+    if (!params.id) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    def dev = switches.find() { it.id == params.id } ?: windowShades.find() { it.id == params.id } ?:
+    	thermostats.find() { it.id == params.id }    
+   
+    if (!dev) {
+    	httpError(400, "invalid id $params.id")
+        return    
+    }
+    def att = dev.supportedAttributes
+    att.each {
+    	resp[it.name] = dev.currentValue("$it.name")
+    }
+    return resp
+}
+
+void updateSwitch() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+	def sw = switches.find() { it.id == params.id }
+    if (!sw) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    switch(command) {
+        case "on":
+        	if ( sw.currentSwitch != "on" ) {
+            	sw.on()
+            }
+            break
+        case "off":
+        	if ( sw.currentSwitch != "off" ) {
+            	sw.off()
+            }
+            break
+        default:
+            httpError(400, "$command is not a valid")
+    }
+}
+
+
+void updateThermostat() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+	def therm = thermostats.find() { it.id == params.id }
+    if (!therm || !command) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    def passComm = [
+        "off",
+        "heat",
+        "emergencyHeat",
+        "cool",
+        "fanOn",
+        "fanAuto",
+        "fanCirculate",
+        "auto"
+
+	]
+    def passNumParamComm = [
+    	"setHeatingSetpoint",
+    	"setCoolingSetpoint",   
+    ]
+    def passStringParamComm = [
+        "setThermostatMode",
+        "setThermostatFanMode",
+	]
+    if (command in passComm) {
+    	therm."$command"()	
+    } else if (command in passNumParamComm && params.p1 && params.p1.isFloat()) {
+    	therm."$command"(Float.parseFloat(params.p1))	
+    } else if (command in passStringParamComm && params.p1) {
+    	therm."$command"(params.p1)	
+    } else {
+    	httpError(400, "$command is not a valid command")
+    }
+}
+
+void updateWindowShade() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+	def ws = windowShades.find() { it.id == params.id }
+    if (!ws || !command) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    def passComm = [
+		"open",
+        "close",
+        "presetPosition",
+	]
+    if (command in passComm) {
+    	ws."$command"()		
+    } else {
+    	httpError(400, "$command is not a valid command")
+    }
+}
+// TODO: implement event handlers

smartapps/smartthings/turn-it-on-for-1-minutes.src/turn-it-on-for-1-minutes.groovy

@@ -0,0 +1,56 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Turn It On For 5 Minutes
+ *  Turn on a switch when a contact sensor opens and then turn it back off 5 minutes later.
+ *
+ *  Author: SmartThings
+ */
+definition(
+    name: "Turn It On For 1 Minutes",
+    namespace: "smartthings",
+    author: "mr.kim",
+    description: "When a SmartSense Multi is opened, a switch will be turned on, and then turned off after 5 minutes.",
+    category: "Safety & Security",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Meta/light_contact-outlet.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Meta/light_contact-outlet@2x.png"
+)
+
+preferences {
+	section("When it opens..."){
+		input "contact1", "capability.contactSensor"
+	}
+	section("Turn on a switch for 5 minutes..."){
+		input "switch1", "capability.switch"
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	subscribe(contact1, "contact.open", contactOpenHandler)
+}
+
+def updated(settings) {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	subscribe(contact1, "contact.open", contactOpenHandler)
+}
+
+def contactOpenHandler(evt) {
+	switch1.on()
+	def fiveMinuteDelay = 60 * 1
+	runIn(fiveMinuteDelay, turnOffSwitch)
+}
+
+def turnOffSwitch() {
+	switch1.off()
+}