MSA-1306: test

devicetypes/smartthings/-.src/-.groovy

@@ -0,0 +1,294 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "재부재 센서", namespace: "smartthings", author: "김성훈") {
+		capability "Tone"
+		capability "Actuator"
+		capability "Signal Strength"
+		capability "Presence Sensor"
+		capability "Sensor"
+		capability "Battery"
+
+		fingerprint profileId: "FC01", deviceId: "019A"
+		fingerprint profileId: "FC01", deviceId: "0131", inClusters: "0000,0003", outClusters: "0003"
+		fingerprint profileId: "FC01", deviceId: "0131", inClusters: "0000", outClusters: "0006"
+	}
+
+	simulator {
+		status "present": "presence: 1"
+		status "not present": "presence: 0"
+		status "battery": "battery: 27, batteryDivisor: 0A, rssi: 100, lqi: 64"
+	}
+
+	preferences {
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Arrival/Arrival1.jpg",
+				"http://cdn.device-gse.smartthings.com/Arrival/Arrival2.jpg"
+				])
+		}
+	}
+
+	tiles {
+		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
+			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
+			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ebeef2"
+		}
+		standardTile("beep", "device.beep", decoration: "flat") {
+			state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
+			state "battery", label:'${currentValue}% battery', unit:""/*, backgroundColors:[
+				[value: 5, color: "#BC2323"],
+				[value: 10, color: "#D04E00"],
+				[value: 15, color: "#F1D801"],
+				[value: 16, color: "#FFFFFF"]
+			]*/
+		}
+		/*
+		valueTile("lqi", "device.lqi", decoration: "flat", inactiveLabel: false) {
+			state "lqi", label:'${currentValue}% signal', unit:""
+		}
+		*/
+		
+		main "presence"
+		details(["presence", "beep", "battery"/*, "lqi"*/])
+	}
+}
+
+def beep() {
+	/*
+	You can make the speaker turn on for 0.5-second beeps by sending some CLI commands:
+
+		Command: send raw, wait 7, send raw, wait 7, send raw
+		Future: new packet type "st.beep"
+
+		raw 0xFC05 {15 0A 11 00 00 15 01}
+		send 0x2F7F 2 2
+
+	where "0xABCD" is the node ID of the Smart Tag, everything else above is a constant. Except
+	the "15 01" at the end of the first raw command, that sets the speaker's period (reciprocal
+	of frequency). You can play with this value up or down to experiment with loudness as the
+	loudness will be strongly dependent upon frequency and the enclosure that it's in. Note that
+	"15 01" represents the hex number 0x0115 so a lower frequency is "16 01" (longer period) and
+	a higher frequency is "14 01" (shorter period). Note that since the tag only checks its parent
+	for messages every 5 seconds (while at rest) or every 3 seconds (while in motion) it will take
+	up to this long from the time you send the message to the time you hear a sound.
+	*/
+
+	[
+		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 7000",
+		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 7000",
+		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 7000",
+		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 7000",
+		"raw 0xFC05 {15 0A 11 00 00 15 01}"
+	]
+}
+
+def parse(String description) {
+	def results
+	if (isBatteryMessage(description)) {
+		results = parseBatteryMessage(description)
+	}
+	else {
+		results = parsePresenceMessage(description)
+	}
+
+	log.debug "Parse returned $results.descriptionText"
+	results
+}
+
+private Map parsePresenceMessage(String description) {
+	def name = parseName(description)
+	def value = parseValue(description)
+	def linkText = getLinkText(device)
+	def descriptionText = parseDescriptionText(linkText, value, description)
+	def handlerName = getState(value)
+	def isStateChange = isStateChange(device, name, value)
+
+	def results = [
+		name: name,
+		value: value,
+		unit: null,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: handlerName,
+		isStateChange: isStateChange,
+		displayed: displayed(description, isStateChange)
+	]
+
+	results
+}
+
+private String parseName(String description) {
+	if (description?.startsWith("presence: ")) {
+		return "presence"
+	}
+	null
+}
+
+private String parseValue(String description) {
+	if (description?.startsWith("presence: "))
+	{
+		if (description?.endsWith("1"))
+		{
+			return "present"
+		}
+		else if (description?.endsWith("0"))
+		{
+			return "not present"
+		}
+	}
+
+	description
+}
+
+private parseDescriptionText(String linkText, String value, String description) {
+	switch(value) {
+		case "present": return "$linkText has arrived"
+		case "not present": return "$linkText has left"
+		default: return value
+	}
+}
+
+private getState(String value) {
+	def state = value
+	if (value == "present") {
+		state = "arrived"
+	}
+	else if (value == "not present") {
+		state = "left"
+	}
+
+	state
+}
+
+private Boolean isBatteryMessage(String description) {
+	// "raw:36EF1C, dni:36EF, battery:1B, rssi:, lqi:"
+	description ==~ /.*battery:.*rssi:.*lqi:.*/
+}
+
+private List parseBatteryMessage(String description) {
+	def results = []
+	def parts = description.split(',')
+	parts.each { part ->
+		part = part.trim()
+		if (part.startsWith('battery:')) {
+			def batteryResult = getBatteryResult(part, description)
+			if (batteryResult) {
+				results << batteryResult
+			}
+		}
+		else if (part.startsWith('rssi:')) {
+			def rssiResult = getRssiResult(part, description)
+			if (rssiResult) {
+				results << rssiResult
+			}
+		}
+		else if (part.startsWith('lqi:')) {
+			def lqiResult = getLqiResult(part, description)
+			if (lqiResult) {
+				results << lqiResult
+			}
+		}
+	}
+
+	results
+}
+
+private getBatteryResult(part, description) {
+	def batteryDivisor = description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"} ? description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"}.split(":")[1].trim() : null
+	def name = "battery"
+	def value = zigbee.parseSmartThingsBatteryValue(part, batteryDivisor)
+	def unit = "%"
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText battery was ${value}${unit}"
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+		name: name,
+		value: value,
+		unit: unit,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: name,
+		isStateChange: isStateChange,
+		//displayed: displayed(description, isStateChange)
+		displayed: false
+	]
+}
+
+private getRssiResult(part, description) {
+	def name = "rssi"
+	def parts = part.split(":")
+	if (parts.size() != 2) return null
+
+	def valueString = parts[1].trim()
+	def valueInt = Integer.parseInt(valueString, 16)
+	def value = (valueInt - 128).toString()
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText was $value dBm"
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+		name: name,
+		value: value,
+		unit: "dBm",
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: null,
+		isStateChange: isStateChange,
+		//displayed: displayed(description, isStateChange)
+		displayed: false
+	]
+}
+
+/**
+ * Use LQI (Link Quality Indicator) as a measure of signal strength. The values
+ * are 0 to 255 (0x00 to 0xFF) and higher values represent higher signal
+ * strength. Return as a percentage of 255.
+ *
+ * Note: To make the signal strength indicator more accurate, we could combine
+ * LQI with RSSI.
+ */
+private getLqiResult(part, description) {
+	def name = "lqi"
+	def parts = part.split(":")
+	if (parts.size() != 2) return null
+
+	def valueString = parts[1].trim()
+	def valueInt = Integer.parseInt(valueString, 16)
+	def percentageOf = 255
+	def value = Math.round((valueInt / percentageOf * 100)).toString()
+	def unit = "%"
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText Signal (LQI) was ${value}${unit}"
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+		name: name,
+		value: value,
+		unit: unit,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: null,
+		isStateChange: isStateChange,
+		//displayed: displayed(description, isStateChange)
+		displayed: false
+	]
+}

devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy

@@ -21,7 +21,6 @@ metadata {
         attribute "tamper", "enum", ["detected", "clear"]
         attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
-        fingerprint mfr:"010F", prod:"0C02", model:"1002"
     }
     simulator {
         //battery

devicetypes/smartthings/hue-white-ambiance-bulb/hue-white-ambiance-bulb.groovy

@@ -1,110 +0,0 @@
-/**
- *  Hue White Ambiance Bulb
- *
- *  Philips Hue Type "Color Temperature Light"
- *
- *  Author: SmartThings
- */
-
-// for the UI
-metadata {
-    // Automatically generated. Make future change here.
-    definition (name: "Hue White Ambiance Bulb", namespace: "smartthings", author: "SmartThings") {
-        capability "Switch Level"
-        capability "Actuator"
-        capability "Color Temperature"
-        capability "Switch"
-        capability "Refresh"
-
-        command "refresh"
-    }
-
-    simulator {
-        // TODO: define status and reply messages here
-    }
-
-    tiles (scale: 2){
-        multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel", range:"(0..100)"
-            }
-        }
-
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
-
-        standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        main(["rich-control"])
-        details(["rich-control", "colorTempSliderControl", "colorTemp", "refresh"])
-    }
-}
-
-// parse events into attributes
-def parse(description) {
-    log.debug "parse() - $description"
-    def results = []
-
-    def map = description
-    if (description instanceof String)  {
-        log.debug "Hue Ambience Bulb stringToMap - ${map}"
-        map = stringToMap(description)
-    }
-
-    if (map?.name && map?.value) {
-        results << createEvent(name: "${map?.name}", value: "${map?.value}")
-    }
-    results
-}
-
-// handle commands
-void on() {
-    log.trace parent.on(this)
-    sendEvent(name: "switch", value: "on")
-}
-
-void off() {
-    log.trace parent.off(this)
-    sendEvent(name: "switch", value: "off")
-}
-
-void setLevel(percent) {
-    log.debug "Executing 'setLevel'"
-    if (percent != null && percent >= 0 && percent <= 100) {
-        parent.setLevel(this, percent)
-        sendEvent(name: "level", value: percent)
-        sendEvent(name: "switch", value: "on")
-    } else {
-        log.warn "$percent is not 0-100"
-    }
-}
-
-void setColorTemperature(value) {
-    if (value) {
-        log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
-        sendEvent(name: "switch", value: "on")
-    } else {
-        log.warn "Invalid color temperature"
-    }
-}
-
-void refresh() {
-    log.debug "Executing 'refresh'"
-    parent.manualRefresh()
-}
-

devicetypes/smartthings/smartsense-motion-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -1,30 +0,0 @@
-# Smartsense Motion Sensor
-
-
-
-Works with: 
-
-* [Samsung SmartThings Motion Sensor](https://shop.smartthings.com/#!/products/samsung-smartthings-motion-sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health]($health)
-
-## Capabilities
-
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Motion Sensor** - can detect motion
-* **Battery** - defines device uses a battery
-* **Refresh** - _refresh()_ command for status updates
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-A Category C2 motion sensor that has 120min check-in interval
-
-
-
-
-
-

smartapps/prempoint-com/prempoint.src/prempoint.groovy

@@ -0,0 +1,345 @@
+/**
+ *  SmartThings service for Prempoint
+ *
+ *  Author: Prempoint Inc. (c) 2016
+ *   
+ */
+definition(
+    name: "Prempoint",
+    namespace: "prempoint.com",
+    author: "Prempoint Inc.",
+    description: "SmartThings service for Prempoint",
+    category: "Connections",
+    iconUrl: "http://www.prempoint.com/images/social_app_emblem_50x50.png",
+    iconX2Url: "http://www.prempoint.com/images/social_app_emblem_100x100.png",
+    iconX3Url: "http://www.prempoint.com/images/social_app_emblem_150x150.png",
+    oauth: [displayName: "Prempoint", displayLink: "http://www.prempoint.com/"])
+
+preferences {
+	section("Allow Prempoint to Control & Access These Things...") {
+		input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
+        input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
+        input "garagedoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
+        //input "doors", "capability.doorControl", title: "Which Doors?", multiple: true, required: false
+        input "cameras", "capability.imageCapture", title: "Which Cameras?", multiple: true, required: false
+	}
+}
+
+mappings {
+	path("/list") {
+		action: [
+			GET: "listDevices"
+		]
+	}
+	path("/switches") {
+		action: [
+			GET: "listSwitches"
+		]
+	}
+	path("/switches/:id") {
+		action: [
+			GET: "showSwitch"
+		]
+	}
+    path("/switches/:id/:command") {
+		action: [
+			GET: "updateSwitch"
+		]
+	}
+	path("/switches/:id/:command/:level") {
+		action: [
+			GET: "updateSwitch"
+		]
+	}
+	path("/locks") {
+		action: [
+			GET: "listLocks"
+		]
+	}
+	path("/locks/:id") {
+		action: [
+			GET: "showLock"
+		]
+	}
+	path("/locks/:id/:command") {
+		action: [
+			GET: "updateLock"
+		]
+	}
+    path("/doors/:id") {
+		action: [
+			GET: "showDoor"
+		]
+	}
+   	path("/doors/:id/:command") {
+		action: [
+			GET: "updateDoor"
+		]
+	}
+	path("/garagedoors/:id") {
+		action: [
+			GET: "showGarageDoor"
+		]
+	}
+   	path("/garagedoors/:id/:command") {
+		action: [
+			GET: "updateGarageDoor"
+		]
+	}
+    path("/cameras/:id") {
+		action: [
+			GET: "showCamera"
+		]
+	}  
+    path("/cameras/:id/:command") {
+		action: [
+			GET: "updateCamera"
+		]
+	}  
+}
+
+def installed() {}
+
+def updated() {}
+
+def listDevices() {
+	log.debug "entering listDevices"
+    //return listSwitches() + listLocks() + listGarageDoors() + listDoors() + listCameras()
+    return listSwitches() + listLocks() + listGarageDoors() + listCameras()
+}
+
+//switches
+def listSwitches() {
+    log.debug "entering listSwitches"
+	switches.collect{showDevice(it,"switch")}
+}
+
+def showSwitch() {
+	log.debug "entering showSwitches"
+	show(switches, "switch")
+}
+
+def updateSwitch() {
+	log.debug "entering updateSwitches"
+	update(switches, "switch")
+}
+
+//locks
+def listLocks() {
+	log.debug "entering listLocks"
+	locks.collect{showDevice(it,"lock")}
+}
+
+def showLock() {
+	log.debug "entering showLock"
+	show(locks, "lock")
+}
+
+def updateLock() {
+	log.debug "entering updateLock"
+	update(locks, "lock")
+}
+
+//doors
+def listDoors() {
+	log.debug "entering listDoors"
+	locks.collect{showDevice(it,"door")}
+}
+
+def showDoor() {
+	log.debug "entering showDoors"
+	show(doors, "door")
+}
+
+def updateDoor() {
+	log.debug "entering updateDoor"
+	update(doors, "door")
+}
+
+//garagedoors
+def listGarageDoors() {
+	log.debug "entering listGarageDoors"
+	locks.collect{showDevice(it,"garagedoor")}
+}
+
+def showGarageDoor() {
+	log.debug "entering showGarageDoors"
+	show(garagedoors, "garagedoor")
+}
+
+def updateGarageDoor() {
+	log.debug "entering updateGarageDoor"
+	update(gargedoors, "garagedoor")
+}
+
+//cameras
+def listCameras() {
+	log.debug "entering listCameras"
+	cameras.collect{showDevice(it,"image")}
+}
+
+def showCamera() {
+	log.debug "entering showCameras"
+	show(cameras, "camera")
+}
+
+def updateCamera() {
+	log.debug "entering updateCamera"
+	update(cameras, "camera")
+}
+
+def deviceHandler(evt) {}
+
+private update(devices, type) {
+	def rc = null
+
+	//def command = request.JSON?.command
+    def command = params.command
+    
+    log.debug "update, request: params: ${params}, devices: $devices.id type=$type command=$command"
+    
+    // Process the command.
+	if (command) 
+    {
+		def dev = devices.find { it.id == params.id }
+		if (!dev) {
+			httpError(404, "Device not found: $params.id")
+		} else if (type == "switch") {
+			switch(command) {
+			    case "on":
+			    	rc = dev.on()
+			    	break
+			    case "off":
+			    	rc = dev.off()
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
+			}
+		} else if (type == "lock") {
+			switch(command) {
+			    case "lock":
+			    	rc = dev.lock()
+			    	break
+			    case "unlock":
+			    	rc = dev.unlock()
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device:=$it.id $dev")
+			}
+		} else if (type == "door") {
+			switch(command) {
+			    case "open":
+			    	rc = dev.open()
+			    	break
+			    case "close":
+			    	rc = dev.close()
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
+			}
+		} else if (type == "garagedoor") {
+			switch(command) {
+			    case "open":
+			    	rc = dev.open()
+			    	break
+			    case "close":
+			    	rc = dev.close()
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
+			}
+		} else if (type == "camera") {
+			switch(command) {
+			    case "take":
+			    	rc = dev.take()
+			    	log.debug "Device command=$command device=$it.id $dev current image=$it.currentImage"
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
+			}
+		}
+
+		log.debug "executed device=$it.id $dev command=$command rc=$rc"
+        
+        // Check that the device is a switch that is currently on, supports 'setLevel"
+        // and that a level was specified.
+        int level = params.level ? params.level as int : -1;
+        if ((type == "switch") && (dev.currentValue('switch') == "on") && hasLevel(dev) && (level != -1)) {            
+            log.debug "device about to setLevel=$level"
+            dev.setLevel(level);
+        }
+        
+        // Show the device info if necessary.
+        if (rc == null) {
+        	rc = showDevice(dev, type)
+        }
+	}
+    
+    return rc
+}
+
+private show(devices, type) {
+	def dev = devices.find { it.id == params.id }
+	if (!dev) {
+		httpError(404, "Device not found")
+	} else { 
+        // Show the device info.
+        showDevice(dev, type)
+	}
+}
+
+private showDevice(it, type) {
+	def props = null
+
+	// Get the current state for the device type.
+	def state = [it.currentState(type)]
+    
+	// Check that whether the a switch device with level support is located and update the returned device type.
+    def devType =  type
+    
+    if (type == "switch" && hasLevel(it)) {
+    	// Assign "switchWithLevel" to device type.
+    	devType = "switchWithLevel"
+        // Add the level state.
+        def levelState = it.currentState("level")
+        if (levelState) {
+        	state.add(levelState)
+        }
+    }
+    
+    log.debug "device label=$it.label type=$devType"
+    
+    // Assign the device item properties if appropriate.
+    if (it) {
+    	props = [id: it.id, label: it.label, type: devType, state: state]
+        // Add the hub information to the device properties
+        // if appropriate.
+        if (it.hub) {
+        	props.put("location", it.hub.hub.location)
+        }
+        if (it.currentImage) {
+        	props.put("currentImage", it.currentImage)
+        }
+    }
+    
+    return props
+}
+
+private hasLevel(device) {
+    // Default return value.
+    def rc = false;
+
+	// Get the device supported commands.
+    def supportedCommands = device.supportedCommands
+    
+    // Check to see if the "setLevel" was found and assign
+    // the appropriate return value.
+    if (supportedCommands) {
+        // Find the "setLevel" command. 
+        rc = supportedCommands.toString().indexOf("setLevel") != -1
+    }
+    
+    log.debug "hasLevel device label=$device.label supportedCommands=$supportedCommands rc=$rc"
+            
+    return rc
+}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -323,8 +323,6 @@ private getDeviceType(hueType) {
 		return "Hue Bulb"
 	else if (hueType?.equalsIgnoreCase("Color Light"))
 		return "Hue Bloom"
-	else if (hueType?.equalsIgnoreCase("Color Temperature Light"))
-		return "Hue White Ambiance Bulb"
 	else
 		return null
 }

smartapps/smartthings/turn-it-on-for-1-minutes.src/turn-it-on-for-1-minutes.groovy

@@ -0,0 +1,56 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Turn It On For 5 Minutes
+ *  Turn on a switch when a contact sensor opens and then turn it back off 5 minutes later.
+ *
+ *  Author: SmartThings
+ */
+definition(
+    name: "Turn It On For 1 Minutes",
+    namespace: "smartthings",
+    author: "mr.kim",
+    description: "When a SmartSense Multi is opened, a switch will be turned on, and then turned off after 5 minutes.",
+    category: "Safety & Security",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Meta/light_contact-outlet.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Meta/light_contact-outlet@2x.png"
+)
+
+preferences {
+	section("When it opens..."){
+		input "contact1", "capability.contactSensor"
+	}
+	section("Turn on a switch for 5 minutes..."){
+		input "switch1", "capability.switch"
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	subscribe(contact1, "contact.open", contactOpenHandler)
+}
+
+def updated(settings) {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	subscribe(contact1, "contact.open", contactOpenHandler)
+}
+
+def contactOpenHandler(evt) {
+	switch1.on()
+	def fiveMinuteDelay = 60 * 1
+	runIn(fiveMinuteDelay, turnOffSwitch)
+}
+
+def turnOffSwitch() {
+	switch1.off()
+}

smartapps/smartthings/ubi.src/ubi.groovy

@@ -107,8 +107,8 @@ mappings {
 	path("/locks") {
 		action: [
 			GET: "listLocks",
-			PUT: "updateLocks",
-			POST: "updateLocks"
+			PUT: "updateLock",
+			POST: "updateLock"
 		]
 	}
 	path("/locks/:id") {
@@ -442,87 +442,31 @@ def executePhrase() {
 }
 
 private void updateAll(devices) {
-	def type = params.param1
 	def command = request.JSON?.command
-	if (!devices) {
-		httpError(404, "Devices not found")
-	}
-	if (command){
-		devices.each { device ->
-			executeCommand(device, type, command)
-		}
+	if (command)
+	{
+		command = command.toLowerCase()
+		devices."$command"()
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
-	def type = params.param1
-	def command = request.JSON?.command
-	def device = devices?.find { it.id == params.id }
-
-	if (!device) {
+	//def command = request.JSON?.command
+	def command = params.command
+	if (command)
+	{
+		command = command.toLowerCase()
+		def device = devices.find { it.id == params.id }
+		if (!device)
+		{
 			httpError(404, "Device not found")
+		}
+		else
+		{
+			device."$command"()
+		}
 	}
-
-	if (command) {
-		executeCommand(device, type, command)
-	}
-}
-
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, deviceType, command) {
-	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-	def currentDeviceCapability = getCapabilityName(deviceType)
-	if (capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
-	}
-}
-
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(type) {
-    switch(type) {
-		case "switches":
-			return "Switch"
-		case "locks":
-			return "Lock"
-		default:
-			return type
-	}
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
-/**
- * Validates and executes the command
- * on the device or devices
- */
-def executeCommand(device, type, command) {
-	if (validateCommand(device, type, command)) {
-		device."$command"()
-	} else {
-		httpError(403, "Access denied. This command is not supported by current capability.")
-	}	
 }
 
 private show(devices, type) {