MSA-1339: Adding support for the Sercomm SZ-DWS04 is simply a matter or adding an additional fingerprint to already existing Smartsense Open/Close sensor.

Please consider adding it as either a separate device handler or as an additional fingerprint to existing handler.

devicetypes/mikespry/sercomm-sz-dws04-open-closed-sensor.src/sercomm-sz-dws04-open-closed-sensor.groovy

@@ -0,0 +1,326 @@
+/**
+ *  Sercomm SZ-DWS04 Open/Closed Sensor
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+metadata {
+	definition (name: "Sercomm SZ-DWS04 Open/Closed Sensor", namespace: "mikespry", author: "Mike Sprycha") {
+		capability "Battery"
+		capability "Configuration"
+		capability "Contact Sensor"
+		capability "Refresh"
+		capability "Temperature Measurement"
+        
+		command "enrollResponse"
+ 
+        fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "Sercomm Corp.", model: "SZ-DWS04N_SF", deviceJoinName: "Sercomm SZ-DWS04"
+	}
+ 
+	simulator {
+ 
+	}
+
+	preferences {
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+	}
+ 
+	tiles(scale: 2) {
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+			}
+		}
+
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main (["contact", "temperature"])
+		details(["contact","temperature","battery","refresh"])
+	}
+}
+ 
+def parse(String description) {
+	log.debug "description: $description"
+    
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+    else if (description?.startsWith('zone status')) {
+    	map = parseIasMessage(description)
+    }
+ 
+	log.debug "Parse returned $map"
+	def result = map ? createEvent(map) : null
+    
+    if (description?.startsWith('enroll request')) {
+    	List cmds = enrollResponse()
+        log.debug "enroll response: ${cmds}"
+        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+    }
+    return result
+}
+ 
+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+            	resultMap = getBatteryResult(cluster.data.last())
+                break
+
+            case 0x0402:
+                log.debug 'TEMP'
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
+        }
+    }
+
+    return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+        cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
+}
+
+private int getHumidity(value) {
+    return Math.round(Double.parseDouble(value))
+}
+ 
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+ 
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+ 
+	return resultMap
+}
+ 
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
+
+private Map parseIasMessage(String description) {
+    List parsedMsg = description.split(' ')
+    String msgCode = parsedMsg[2]
+    
+    Map resultMap = [:]
+    switch(msgCode) {
+        case '0x0020': // Closed/No Motion/Dry
+        	resultMap = getContactResult('closed')
+            break
+
+        case '0x0021': // Open/Motion/Wet
+        	resultMap = getContactResult('open')
+            break
+
+        case '0x0022': // Tamper Alarm
+            break
+
+        case '0x0023': // Battery Alarm
+            break
+
+        case '0x0024': // Supervision Report
+        	resultMap = getContactResult('closed')
+            break
+
+        case '0x0025': // Restore Report
+        	resultMap = getContactResult('open')
+            break
+
+        case '0x0026': // Trouble/Failure
+            break
+
+        case '0x0028': // Test Mode
+            break
+    }
+    return resultMap
+}
+ 
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return celsius
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
+}
+
+private Map getBatteryResult(rawValue) {
+	log.debug 'Battery'
+	def linkText = getLinkText(device)
+    
+    def result = [
+    	name: 'battery'
+    ]
+    
+	def volts = rawValue / 10
+	def descriptionText
+    if (rawValue == 0 || rawValue == 255) {}
+    else if (volts > 3.5) {
+		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+	}
+	else {
+		def minVolts = 2.1
+    	def maxVolts = 3.0
+		def pct = (volts - minVolts) / (maxVolts - minVolts)
+		result.value = Math.min(100, (int) pct * 100)
+		result.descriptionText = "${linkText} battery was ${result.value}%"
+	}
+
+	return result
+}
+
+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	def linkText = getLinkText(device)
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText
+	]
+}
+
+private Map getContactResult(value) {
+	log.debug 'Contact Status'
+	def linkText = getLinkText(device)
+	def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
+	return [
+		name: 'contact',
+		value: value,
+		descriptionText: descriptionText
+	]
+}
+
+def refresh() {
+	log.debug "Refreshing Temperature and Battery"
+	def refreshCmds = [
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+	]
+
+	return refreshCmds + enrollResponse()
+}
+
+def configure() {
+
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
+	]
+    return configCmds + refresh() // send refresh cmds as part of config
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}

devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy

@@ -21,6 +21,7 @@ metadata {
         attribute "tamper", "enum", ["detected", "clear"]
         attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
+        fingerprint mfr:"010F", prod:"0C02", model:"1002"
     }
     simulator {
         //battery

devicetypes/smartthings/hue-white-ambiance-bulb/hue-white-ambiance-bulb.groovy

@@ -0,0 +1,110 @@
+/**
+ *  Hue White Ambiance Bulb
+ *
+ *  Philips Hue Type "Color Temperature Light"
+ *
+ *  Author: SmartThings
+ */
+
+// for the UI
+metadata {
+    // Automatically generated. Make future change here.
+    definition (name: "Hue White Ambiance Bulb", namespace: "smartthings", author: "SmartThings") {
+        capability "Switch Level"
+        capability "Actuator"
+        capability "Color Temperature"
+        capability "Switch"
+        capability "Refresh"
+
+        command "refresh"
+    }
+
+    simulator {
+        // TODO: define status and reply messages here
+    }
+
+    tiles (scale: 2){
+        multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+        standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["rich-control"])
+        details(["rich-control", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+// parse events into attributes
+def parse(description) {
+    log.debug "parse() - $description"
+    def results = []
+
+    def map = description
+    if (description instanceof String)  {
+        log.debug "Hue Ambience Bulb stringToMap - ${map}"
+        map = stringToMap(description)
+    }
+
+    if (map?.name && map?.value) {
+        results << createEvent(name: "${map?.name}", value: "${map?.value}")
+    }
+    results
+}
+
+// handle commands
+void on() {
+    log.trace parent.on(this)
+    sendEvent(name: "switch", value: "on")
+}
+
+void off() {
+    log.trace parent.off(this)
+    sendEvent(name: "switch", value: "off")
+}
+
+void setLevel(percent) {
+    log.debug "Executing 'setLevel'"
+    if (percent != null && percent >= 0 && percent <= 100) {
+        parent.setLevel(this, percent)
+        sendEvent(name: "level", value: percent)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "$percent is not 0-100"
+    }
+}
+
+void setColorTemperature(value) {
+    if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "Invalid color temperature"
+    }
+}
+
+void refresh() {
+    log.debug "Executing 'refresh'"
+    parent.manualRefresh()
+}
+

devicetypes/smartthings/smartsense-motion-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -0,0 +1,30 @@
+# Smartsense Motion Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartThings Motion Sensor](https://shop.smartthings.com/#!/products/samsung-smartthings-motion-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health]($health)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Motion Sensor** - can detect motion
+* **Battery** - defines device uses a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C2 motion sensor that has 120min check-in interval
+
+
+
+
+
+

smartapps/prempoint-com/prempoint.src/prempoint.groovy

@@ -1,345 +0,0 @@
-/**
- *  SmartThings service for Prempoint
- *
- *  Author: Prempoint Inc. (c) 2016
- *   
- */
-definition(
-    name: "Prempoint",
-    namespace: "prempoint.com",
-    author: "Prempoint Inc.",
-    description: "SmartThings service for Prempoint",
-    category: "Connections",
-    iconUrl: "http://www.prempoint.com/images/social_app_emblem_50x50.png",
-    iconX2Url: "http://www.prempoint.com/images/social_app_emblem_100x100.png",
-    iconX3Url: "http://www.prempoint.com/images/social_app_emblem_150x150.png",
-    oauth: [displayName: "Prempoint", displayLink: "http://www.prempoint.com/"])
-
-preferences {
-	section("Allow Prempoint to Control & Access These Things...") {
-		input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
-        input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-        input "garagedoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
-        //input "doors", "capability.doorControl", title: "Which Doors?", multiple: true, required: false
-        input "cameras", "capability.imageCapture", title: "Which Cameras?", multiple: true, required: false
-	}
-}
-
-mappings {
-	path("/list") {
-		action: [
-			GET: "listDevices"
-		]
-	}
-	path("/switches") {
-		action: [
-			GET: "listSwitches"
-		]
-	}
-	path("/switches/:id") {
-		action: [
-			GET: "showSwitch"
-		]
-	}
-    path("/switches/:id/:command") {
-		action: [
-			GET: "updateSwitch"
-		]
-	}
-	path("/switches/:id/:command/:level") {
-		action: [
-			GET: "updateSwitch"
-		]
-	}
-	path("/locks") {
-		action: [
-			GET: "listLocks"
-		]
-	}
-	path("/locks/:id") {
-		action: [
-			GET: "showLock"
-		]
-	}
-	path("/locks/:id/:command") {
-		action: [
-			GET: "updateLock"
-		]
-	}
-    path("/doors/:id") {
-		action: [
-			GET: "showDoor"
-		]
-	}
-   	path("/doors/:id/:command") {
-		action: [
-			GET: "updateDoor"
-		]
-	}
-	path("/garagedoors/:id") {
-		action: [
-			GET: "showGarageDoor"
-		]
-	}
-   	path("/garagedoors/:id/:command") {
-		action: [
-			GET: "updateGarageDoor"
-		]
-	}
-    path("/cameras/:id") {
-		action: [
-			GET: "showCamera"
-		]
-	}  
-    path("/cameras/:id/:command") {
-		action: [
-			GET: "updateCamera"
-		]
-	}  
-}
-
-def installed() {}
-
-def updated() {}
-
-def listDevices() {
-	log.debug "entering listDevices"
-    //return listSwitches() + listLocks() + listGarageDoors() + listDoors() + listCameras()
-    return listSwitches() + listLocks() + listGarageDoors() + listCameras()
-}
-
-//switches
-def listSwitches() {
-    log.debug "entering listSwitches"
-	switches.collect{showDevice(it,"switch")}
-}
-
-def showSwitch() {
-	log.debug "entering showSwitches"
-	show(switches, "switch")
-}
-
-def updateSwitch() {
-	log.debug "entering updateSwitches"
-	update(switches, "switch")
-}
-
-//locks
-def listLocks() {
-	log.debug "entering listLocks"
-	locks.collect{showDevice(it,"lock")}
-}
-
-def showLock() {
-	log.debug "entering showLock"
-	show(locks, "lock")
-}
-
-def updateLock() {
-	log.debug "entering updateLock"
-	update(locks, "lock")
-}
-
-//doors
-def listDoors() {
-	log.debug "entering listDoors"
-	locks.collect{showDevice(it,"door")}
-}
-
-def showDoor() {
-	log.debug "entering showDoors"
-	show(doors, "door")
-}
-
-def updateDoor() {
-	log.debug "entering updateDoor"
-	update(doors, "door")
-}
-
-//garagedoors
-def listGarageDoors() {
-	log.debug "entering listGarageDoors"
-	locks.collect{showDevice(it,"garagedoor")}
-}
-
-def showGarageDoor() {
-	log.debug "entering showGarageDoors"
-	show(garagedoors, "garagedoor")
-}
-
-def updateGarageDoor() {
-	log.debug "entering updateGarageDoor"
-	update(gargedoors, "garagedoor")
-}
-
-//cameras
-def listCameras() {
-	log.debug "entering listCameras"
-	cameras.collect{showDevice(it,"image")}
-}
-
-def showCamera() {
-	log.debug "entering showCameras"
-	show(cameras, "camera")
-}
-
-def updateCamera() {
-	log.debug "entering updateCamera"
-	update(cameras, "camera")
-}
-
-def deviceHandler(evt) {}
-
-private update(devices, type) {
-	def rc = null
-
-	//def command = request.JSON?.command
-    def command = params.command
-    
-    log.debug "update, request: params: ${params}, devices: $devices.id type=$type command=$command"
-    
-    // Process the command.
-	if (command) 
-    {
-		def dev = devices.find { it.id == params.id }
-		if (!dev) {
-			httpError(404, "Device not found: $params.id")
-		} else if (type == "switch") {
-			switch(command) {
-			    case "on":
-			    	rc = dev.on()
-			    	break
-			    case "off":
-			    	rc = dev.off()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		} else if (type == "lock") {
-			switch(command) {
-			    case "lock":
-			    	rc = dev.lock()
-			    	break
-			    case "unlock":
-			    	rc = dev.unlock()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device:=$it.id $dev")
-			}
-		} else if (type == "door") {
-			switch(command) {
-			    case "open":
-			    	rc = dev.open()
-			    	break
-			    case "close":
-			    	rc = dev.close()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		} else if (type == "garagedoor") {
-			switch(command) {
-			    case "open":
-			    	rc = dev.open()
-			    	break
-			    case "close":
-			    	rc = dev.close()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		} else if (type == "camera") {
-			switch(command) {
-			    case "take":
-			    	rc = dev.take()
-			    	log.debug "Device command=$command device=$it.id $dev current image=$it.currentImage"
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		}
-
-		log.debug "executed device=$it.id $dev command=$command rc=$rc"
-        
-        // Check that the device is a switch that is currently on, supports 'setLevel"
-        // and that a level was specified.
-        int level = params.level ? params.level as int : -1;
-        if ((type == "switch") && (dev.currentValue('switch') == "on") && hasLevel(dev) && (level != -1)) {            
-            log.debug "device about to setLevel=$level"
-            dev.setLevel(level);
-        }
-        
-        // Show the device info if necessary.
-        if (rc == null) {
-        	rc = showDevice(dev, type)
-        }
-	}
-    
-    return rc
-}
-
-private show(devices, type) {
-	def dev = devices.find { it.id == params.id }
-	if (!dev) {
-		httpError(404, "Device not found")
-	} else { 
-        // Show the device info.
-        showDevice(dev, type)
-	}
-}
-
-private showDevice(it, type) {
-	def props = null
-
-	// Get the current state for the device type.
-	def state = [it.currentState(type)]
-    
-	// Check that whether the a switch device with level support is located and update the returned device type.
-    def devType =  type
-    
-    if (type == "switch" && hasLevel(it)) {
-    	// Assign "switchWithLevel" to device type.
-    	devType = "switchWithLevel"
-        // Add the level state.
-        def levelState = it.currentState("level")
-        if (levelState) {
-        	state.add(levelState)
-        }
-    }
-    
-    log.debug "device label=$it.label type=$devType"
-    
-    // Assign the device item properties if appropriate.
-    if (it) {
-    	props = [id: it.id, label: it.label, type: devType, state: state]
-        // Add the hub information to the device properties
-        // if appropriate.
-        if (it.hub) {
-        	props.put("location", it.hub.hub.location)
-        }
-        if (it.currentImage) {
-        	props.put("currentImage", it.currentImage)
-        }
-    }
-    
-    return props
-}
-
-private hasLevel(device) {
-    // Default return value.
-    def rc = false;
-
-	// Get the device supported commands.
-    def supportedCommands = device.supportedCommands
-    
-    // Check to see if the "setLevel" was found and assign
-    // the appropriate return value.
-    if (supportedCommands) {
-        // Find the "setLevel" command. 
-        rc = supportedCommands.toString().indexOf("setLevel") != -1
-    }
-    
-    log.debug "hasLevel device label=$device.label supportedCommands=$supportedCommands rc=$rc"
-            
-    return rc
-}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -30,6 +30,7 @@ definition(
 preferences {
 	page(name:"mainPage", title:"Hue Device Setup", content:"mainPage", refreshTimeout:5)
 	page(name:"bridgeDiscovery", title:"Hue Bridge Discovery", content:"bridgeDiscovery", refreshTimeout:5)
+	page(name:"bridgeDiscoveryFailed", title:"Bridge Discovery Failed", content:"bridgeDiscoveryFailed", refreshTimeout:0)
 	page(name:"bridgeBtnPush", title:"Linking with your Hue", content:"bridgeLinking", refreshTimeout:5)
 	page(name:"bulbDiscovery", title:"Hue Device Setup", content:"bulbDiscovery", refreshTimeout:5)
 }
@@ -53,12 +54,21 @@ def bridgeDiscovery(params=[:])
 	def options = bridges ?: []
 	def numFound = options.size() ?: 0
 
-	if (numFound == 0 && state.bridgeRefreshCount > 25) {
-    	log.trace "Cleaning old bridges memory"
-    	state.bridges = [:]
-        state.bridgeRefreshCount = 0
-        app.updateSetting("selectedHue", "")
-    }
+	if (numFound == 0) {
+		if (state.bridgeRefreshCount == 25) {
+			log.trace "Cleaning old bridges memory"
+			state.bridges = [:]
+			app.updateSetting("selectedHue", "")
+		} else if (state.bridgeRefreshCount > 100) {
+			// five minutes have passed, give up
+			// there seems to be a problem going back from discovey failed page in some instances (compared to pressing next)
+			// however it is probably a SmartThings settings issue
+			state.bridges = [:]
+			app.updateSetting("selectedHue", "")
+			state.bridgeRefreshCount = 0
+			return bridgeDiscoveryFailed()
+		}
+	}
 
 	ssdpSubscribe()
 
@@ -79,6 +89,13 @@ def bridgeDiscovery(params=[:])
 	}
 }
 
+def bridgeDiscoveryFailed() {
+	return dynamicPage(name:"bridgeDiscoveryFailed", title: "Bridge Discovery Failed", nextPage: "bridgeDiscovery") {
+		section("Failed to discover any Hue Bridges. Please confirm that the Hue Bridge is connected to the same network as your SmartThings Hub, and that it has power.") {
+		}
+	}
+}
+
 def bridgeLinking()
 {
 	int linkRefreshcount = !state.linkRefreshcount ? 0 : state.linkRefreshcount as int
@@ -88,19 +105,15 @@ def bridgeLinking()
 	def nextPage = ""
 	def title = "Linking with your Hue"
     def paragraphText
-    def hueimage = null
 	if (selectedHue) {
 		paragraphText = "Press the button on your Hue Bridge to setup a link. "
-        hueimage = "http://huedisco.mediavibe.nl/wp-content/uploads/2013/09/pair-bridge.png"
     } else {
     	paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
-        hueimage = null
     }
 	if (state.username) { //if discovery worked
 		nextPage = "bulbDiscovery"
 		title = "Success!"
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
-        hueimage = null
 	}
 
 	if((linkRefreshcount % 2) == 0 && !state.username) {
@@ -110,8 +123,6 @@ def bridgeLinking()
 	return dynamicPage(name:"bridgeBtnPush", title:title, nextPage:nextPage, refreshInterval:refreshInterval) {
 		section("") {
 			paragraph """${paragraphText}"""
-            if (hueimage != null)
-            	image "${hueimage}"
 		}
 	}
 }
@@ -135,13 +146,14 @@ def bulbDiscovery() {
 	if((bulbRefreshCount % 5) == 0) {
 		discoverHueBulbs()
 	}
+	def selectedBridge = state.bridges.find { key, value -> value?.serialNumber?.equalsIgnoreCase(selectedHue) }
+	def title = selectedBridge?.value?.name ?: "Find bridges"
 
 	return dynamicPage(name:"bulbDiscovery", title:"Bulb Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 		section("Please wait while we discover your Hue Bulbs. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:bulboptions
 		}
 		section {
-			def title = getBridgeIP() ? "Hue bridge (${getBridgeIP()})" : "Find bridges"
 			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
 
 		}
@@ -323,6 +335,8 @@ private getDeviceType(hueType) {
 		return "Hue Bulb"
 	else if (hueType?.equalsIgnoreCase("Color Light"))
 		return "Hue Bloom"
+	else if (hueType?.equalsIgnoreCase("Color Temperature Light"))
+		return "Hue White Ambiance Bulb"
 	else
 		return null
 }
@@ -346,26 +360,29 @@ def addBulbs() {
 			def newHueBulb
 			if (bulbs instanceof java.util.Map) {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
-                if (newHueBulb != null) {
-                    d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
+
+				if (newHueBulb != null) {
+					d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
 					if (d) {
 						log.debug "created ${d.displayName} with id $dni"
+						d.completedSetup = true
 						d.refresh()
 					}
-                } else {
-                	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
-                }
+				} else {
+					log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
+				}
 			} else {
-            	//backwards compatable
+			 	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
+				d?.completedSetup = true
 				d?.refresh()
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
 			if (bulbs instanceof java.util.Map) {
 				// Update device type if incorrect
-            	def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
+				def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
 				upgradeDeviceType(d, newHueBulb?.value?.type)
 			}
 		}
@@ -397,6 +414,7 @@ def addBridge() {
             }
         	if (newbridge) {
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub)
+				d?.completedSetup = true
  				log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
                 def childDevice = getChildDevice(d.deviceNetworkId)
                 childDevice.sendEvent(name: "serialNumber", value: vbridge.value.serialNumber)
@@ -484,7 +502,21 @@ void bridgeDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
 		def bridges = getHueBridges()
 		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
 		if (bridge) {
-			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
+			// serialNumber from API is in format of 0017882413ad (mac address), however on the actual bridge only last six
+			// characters are printed on the back so using that to identify bridge
+			def idNumber = body?.device?.serialNumber?.text()
+			if (idNumber?.size() >= 6)
+				idNumber = idNumber[-6..-1].toUpperCase()
+
+			// usually in form of bridge name followed by (ip), i.e. defaults to Philips Hue (192.168.1.2)
+			// replace IP with serial number to make it easier for user to identify
+			def name = body?.device?.friendlyName?.text()
+			def index = name?.indexOf('(')
+			if (index != -1) {
+				name = name.substring(0,index)
+				name += " ($idNumber)"
+			}
+			bridge.value << [name:name, serialNumber:body?.device?.serialNumber?.text(), verified: true]
 		} else {
 			log.error "/description.xml returned a bridge that didn't exist"
 		}

smartapps/smartthings/ubi.src/ubi.groovy

@@ -107,8 +107,8 @@ mappings {
 	path("/locks") {
 		action: [
 			GET: "listLocks",
-			PUT: "updateLock",
-			POST: "updateLock"
+			PUT: "updateLocks",
+			POST: "updateLocks"
 		]
 	}
 	path("/locks/:id") {
@@ -442,31 +442,87 @@ def executePhrase() {
 }
 
 private void updateAll(devices) {
+	def type = params.param1
 	def command = request.JSON?.command
-	if (command)
-	{
-		command = command.toLowerCase()
-		devices."$command"()
+	if (!devices) {
+		httpError(404, "Devices not found")
+	}
+	if (command){
+		devices.each { device ->
+			executeCommand(device, type, command)
+		}
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
-	//def command = request.JSON?.command
-	def command = params.command
-	if (command)
-	{
-		command = command.toLowerCase()
-		def device = devices.find { it.id == params.id }
-		if (!device)
-		{
+	def type = params.param1
+	def command = request.JSON?.command
+	def device = devices?.find { it.id == params.id }
+
+	if (!device) {
 			httpError(404, "Device not found")
-		}
-		else
-		{
-			device."$command"()
-		}
 	}
+
+	if (command) {
+		executeCommand(device, type, command)
+	}
+}
+
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, deviceType, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(deviceType)
+	if (capabilityCommands[currentDeviceCapability]) {
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
+	}
+}
+
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(type) {
+    switch(type) {
+		case "switches":
+			return "Switch"
+		case "locks":
+			return "Lock"
+		default:
+			return type
+	}
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
+/**
+ * Validates and executes the command
+ * on the device or devices
+ */
+def executeCommand(device, type, command) {
+	if (validateCommand(device, type, command)) {
+		device."$command"()
+	} else {
+		httpError(403, "Access denied. This command is not supported by current capability.")
+	}	
 }
 
 private show(devices, type) {