MSA-1339: Adding support for the Sercomm SZ-DWS04 is simply a matter or adding an additional fingerprint to already existing Smartsense Open/Close sensor.

Please consider adding it as either a separate device handler or as an additional fingerprint to existing handler.

devicetypes/mikespry/sercomm-sz-dws04-open-closed-sensor.src/sercomm-sz-dws04-open-closed-sensor.groovy

@@ -0,0 +1,326 @@
+/**
+ *  Sercomm SZ-DWS04 Open/Closed Sensor
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+metadata {
+	definition (name: "Sercomm SZ-DWS04 Open/Closed Sensor", namespace: "mikespry", author: "Mike Sprycha") {
+		capability "Battery"
+		capability "Configuration"
+		capability "Contact Sensor"
+		capability "Refresh"
+		capability "Temperature Measurement"
+        
+		command "enrollResponse"
+ 
+        fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "Sercomm Corp.", model: "SZ-DWS04N_SF", deviceJoinName: "Sercomm SZ-DWS04"
+	}
+ 
+	simulator {
+ 
+	}
+
+	preferences {
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+	}
+ 
+	tiles(scale: 2) {
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+			}
+		}
+
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main (["contact", "temperature"])
+		details(["contact","temperature","battery","refresh"])
+	}
+}
+ 
+def parse(String description) {
+	log.debug "description: $description"
+    
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+    else if (description?.startsWith('zone status')) {
+    	map = parseIasMessage(description)
+    }
+ 
+	log.debug "Parse returned $map"
+	def result = map ? createEvent(map) : null
+    
+    if (description?.startsWith('enroll request')) {
+    	List cmds = enrollResponse()
+        log.debug "enroll response: ${cmds}"
+        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+    }
+    return result
+}
+ 
+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+            	resultMap = getBatteryResult(cluster.data.last())
+                break
+
+            case 0x0402:
+                log.debug 'TEMP'
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
+        }
+    }
+
+    return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+        cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
+}
+
+private int getHumidity(value) {
+    return Math.round(Double.parseDouble(value))
+}
+ 
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+ 
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+ 
+	return resultMap
+}
+ 
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
+
+private Map parseIasMessage(String description) {
+    List parsedMsg = description.split(' ')
+    String msgCode = parsedMsg[2]
+    
+    Map resultMap = [:]
+    switch(msgCode) {
+        case '0x0020': // Closed/No Motion/Dry
+        	resultMap = getContactResult('closed')
+            break
+
+        case '0x0021': // Open/Motion/Wet
+        	resultMap = getContactResult('open')
+            break
+
+        case '0x0022': // Tamper Alarm
+            break
+
+        case '0x0023': // Battery Alarm
+            break
+
+        case '0x0024': // Supervision Report
+        	resultMap = getContactResult('closed')
+            break
+
+        case '0x0025': // Restore Report
+        	resultMap = getContactResult('open')
+            break
+
+        case '0x0026': // Trouble/Failure
+            break
+
+        case '0x0028': // Test Mode
+            break
+    }
+    return resultMap
+}
+ 
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return celsius
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
+}
+
+private Map getBatteryResult(rawValue) {
+	log.debug 'Battery'
+	def linkText = getLinkText(device)
+    
+    def result = [
+    	name: 'battery'
+    ]
+    
+	def volts = rawValue / 10
+	def descriptionText
+    if (rawValue == 0 || rawValue == 255) {}
+    else if (volts > 3.5) {
+		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+	}
+	else {
+		def minVolts = 2.1
+    	def maxVolts = 3.0
+		def pct = (volts - minVolts) / (maxVolts - minVolts)
+		result.value = Math.min(100, (int) pct * 100)
+		result.descriptionText = "${linkText} battery was ${result.value}%"
+	}
+
+	return result
+}
+
+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	def linkText = getLinkText(device)
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText
+	]
+}
+
+private Map getContactResult(value) {
+	log.debug 'Contact Status'
+	def linkText = getLinkText(device)
+	def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
+	return [
+		name: 'contact',
+		value: value,
+		descriptionText: descriptionText
+	]
+}
+
+def refresh() {
+	log.debug "Refreshing Temperature and Battery"
+	def refreshCmds = [
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+	]
+
+	return refreshCmds + enrollResponse()
+}
+
+def configure() {
+
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
+	]
+    return configCmds + refresh() // send refresh cmds as part of config
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}

devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy

@@ -21,6 +21,7 @@ metadata {
         attribute "tamper", "enum", ["detected", "clear"]
         attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
+        fingerprint mfr:"010F", prod:"0C02", model:"1002"
     }
     simulator {
         //battery

devicetypes/smartthings/hue-white-ambiance-bulb/hue-white-ambiance-bulb.groovy

@@ -0,0 +1,110 @@
+/**
+ *  Hue White Ambiance Bulb
+ *
+ *  Philips Hue Type "Color Temperature Light"
+ *
+ *  Author: SmartThings
+ */
+
+// for the UI
+metadata {
+    // Automatically generated. Make future change here.
+    definition (name: "Hue White Ambiance Bulb", namespace: "smartthings", author: "SmartThings") {
+        capability "Switch Level"
+        capability "Actuator"
+        capability "Color Temperature"
+        capability "Switch"
+        capability "Refresh"
+
+        command "refresh"
+    }
+
+    simulator {
+        // TODO: define status and reply messages here
+    }
+
+    tiles (scale: 2){
+        multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+        standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["rich-control"])
+        details(["rich-control", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+// parse events into attributes
+def parse(description) {
+    log.debug "parse() - $description"
+    def results = []
+
+    def map = description
+    if (description instanceof String)  {
+        log.debug "Hue Ambience Bulb stringToMap - ${map}"
+        map = stringToMap(description)
+    }
+
+    if (map?.name && map?.value) {
+        results << createEvent(name: "${map?.name}", value: "${map?.value}")
+    }
+    results
+}
+
+// handle commands
+void on() {
+    log.trace parent.on(this)
+    sendEvent(name: "switch", value: "on")
+}
+
+void off() {
+    log.trace parent.off(this)
+    sendEvent(name: "switch", value: "off")
+}
+
+void setLevel(percent) {
+    log.debug "Executing 'setLevel'"
+    if (percent != null && percent >= 0 && percent <= 100) {
+        parent.setLevel(this, percent)
+        sendEvent(name: "level", value: percent)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "$percent is not 0-100"
+    }
+}
+
+void setColorTemperature(value) {
+    if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "Invalid color temperature"
+    }
+}
+
+void refresh() {
+    log.debug "Executing 'refresh'"
+    parent.manualRefresh()
+}
+

devicetypes/smartthings/smartsense-motion-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -0,0 +1,30 @@
+# Smartsense Motion Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartThings Motion Sensor](https://shop.smartthings.com/#!/products/samsung-smartthings-motion-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health]($health)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Motion Sensor** - can detect motion
+* **Battery** - defines device uses a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C2 motion sensor that has 120min check-in interval
+
+
+
+
+
+

smartapps/com-gidjit-smartthings-hub/gidjit-hub.src/gidjit-hub.groovy

@@ -0,0 +1,252 @@
+/**
+ *  Gidjit Hub
+ *
+ *  Copyright 2016 Matthew Page
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Gidjit Hub",
+    namespace: "com.gidjit.smartthings.hub",
+    author: "Matthew Page",
+    description: "Act as an endpoint so user's of Gidjit can quickly access and control their devices and execute routines. Users can do this quickly as Gidjit filters these actions  based on their environment",
+    category: "Convenience",
+    iconUrl: "http://www.gidjit.com/appicon.png",
+    iconX2Url: "http://www.gidjit.com/appicon@2x.png",
+    iconX3Url: "http://www.gidjit.com/appicon@3x.png",
+    oauth: [displayName: "Gidjit", displayLink: "www.gidjit.com"])
+
+
+
+preferences {
+  section ("Allow Gidjit to have access, there by allowing you to quickly control and monitor the following devices") {
+    input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
+    input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
+    input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
+    //input "bulbs", "capability.colorControl", title: "Control your lights", multiple: true, required: false //windowShade
+
+  }
+}
+mappings {
+  path("/structureinfo") {
+    action: [
+      GET: "structureInfo"
+    ]
+  }
+  path("/helloactions") {
+    action: [
+      GET: "helloActions"
+    ]
+  }
+  path("/helloactions/:label") {
+    action: [
+      PUT: "executeAction"
+    ]
+  }
+
+  path("/switch/:id/:command") {
+    action: [
+      PUT: "updateSwitch"
+    ]
+  }
+
+  path("/thermostat/:id/:command") {
+    action: [
+      PUT: "updateThermostat"
+    ]
+  }
+
+  path("/windowshade/:id/:command") {
+    action: [
+      PUT: "updateWindowShade"
+    ]
+  }
+  path("/acquiredata/:id") {
+    action: [
+      GET: "acquiredata"
+    ]
+  }
+}
+
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// subscribe to attributes, devices, locations, etc.
+}
+def helloActions() {
+	def actions = location.helloHome?.getPhrases()*.label
+    if(!actions) {
+    	return []
+    }
+	return actions
+}
+def executeAction() {
+    def actions = location.helloHome?.getPhrases()*.label
+    def a = actions?.find() { it == params.label }
+    if (!a) {
+        httpError(400, "invalid label $params.label")
+        return
+    }
+    location.helloHome?.execute(params.label)
+}
+/*  this is the primary function called to query at the structure and its devices */
+def structureInfo() { //list all devices
+	def list = [:]
+    def currId = location.id
+    list[currId] = [:]
+    list[currId].name = location.name
+    list[currId].id = location.id
+    list[currId].temperatureScale = location.temperatureScale
+    list[currId].devices = [:]
+  
+    def setValues = {
+   		if (params.brief) {
+            return [id: it.id, name: it.displayName]
+        }
+        def newList = [id: it.id, name: it.displayName, suppCapab: it.capabilities.collect {
+            "$it.name"
+        }, suppAttributes: it.supportedAttributes.collect {
+            "$it.name"      
+        }, suppCommands: it.supportedCommands.collect {
+            "$it.name"      
+        }]
+
+        return newList
+    }
+    switches?.each {
+      list[currId].devices[it.id] = setValues(it)
+    }
+    thermostats?.each {
+      list[currId].devices[it.id] = setValues(it)
+    }
+    windowShades?.each {
+      list[currId].devices[it.id] = setValues(it)
+    }
+
+    return list
+
+}
+/*  This function returns all of the current values of the specified Devices attributes */
+def acquiredata() {
+	def resp = [:]
+    if (!params.id) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    def dev = switches.find() { it.id == params.id } ?: windowShades.find() { it.id == params.id } ?:
+    	thermostats.find() { it.id == params.id }    
+   
+    if (!dev) {
+    	httpError(400, "invalid id $params.id")
+        return    
+    }
+    def att = dev.supportedAttributes
+    att.each {
+    	resp[it.name] = dev.currentValue("$it.name")
+    }
+    return resp
+}
+
+void updateSwitch() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+	def sw = switches.find() { it.id == params.id }
+    if (!sw) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    switch(command) {
+        case "on":
+        	if ( sw.currentSwitch != "on" ) {
+            	sw.on()
+            }
+            break
+        case "off":
+        	if ( sw.currentSwitch != "off" ) {
+            	sw.off()
+            }
+            break
+        default:
+            httpError(400, "$command is not a valid")
+    }
+}
+
+
+void updateThermostat() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+	def therm = thermostats.find() { it.id == params.id }
+    if (!therm || !command) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    def passComm = [
+        "off",
+        "heat",
+        "emergencyHeat",
+        "cool",
+        "fanOn",
+        "fanAuto",
+        "fanCirculate",
+        "auto"
+
+	]
+    def passNumParamComm = [
+    	"setHeatingSetpoint",
+    	"setCoolingSetpoint",   
+    ]
+    def passStringParamComm = [
+        "setThermostatMode",
+        "setThermostatFanMode",
+	]
+    if (command in passComm) {
+    	therm."$command"()	
+    } else if (command in passNumParamComm && params.p1 && params.p1.isFloat()) {
+    	therm."$command"(Float.parseFloat(params.p1))	
+    } else if (command in passStringParamComm && params.p1) {
+    	therm."$command"(params.p1)	
+    } else {
+    	httpError(400, "$command is not a valid command")
+    }
+}
+
+void updateWindowShade() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+	def ws = windowShades.find() { it.id == params.id }
+    if (!ws || !command) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    def passComm = [
+		"open",
+        "close",
+        "presetPosition",
+	]
+    if (command in passComm) {
+    	ws."$command"()		
+    } else {
+    	httpError(400, "$command is not a valid command")
+    }
+}
+// TODO: implement event handlers

smartapps/prempoint-com/prempoint.src/prempoint.groovy

@@ -1,345 +0,0 @@
-/**
- *  SmartThings service for Prempoint
- *
- *  Author: Prempoint Inc. (c) 2016
- *   
- */
-definition(
-    name: "Prempoint",
-    namespace: "prempoint.com",
-    author: "Prempoint Inc.",
-    description: "SmartThings service for Prempoint",
-    category: "Connections",
-    iconUrl: "http://www.prempoint.com/images/social_app_emblem_50x50.png",
-    iconX2Url: "http://www.prempoint.com/images/social_app_emblem_100x100.png",
-    iconX3Url: "http://www.prempoint.com/images/social_app_emblem_150x150.png",
-    oauth: [displayName: "Prempoint", displayLink: "http://www.prempoint.com/"])
-
-preferences {
-	section("Allow Prempoint to Control & Access These Things...") {
-		input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
-        input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-        input "garagedoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
-        //input "doors", "capability.doorControl", title: "Which Doors?", multiple: true, required: false
-        input "cameras", "capability.imageCapture", title: "Which Cameras?", multiple: true, required: false
-	}
-}
-
-mappings {
-	path("/list") {
-		action: [
-			GET: "listDevices"
-		]
-	}
-	path("/switches") {
-		action: [
-			GET: "listSwitches"
-		]
-	}
-	path("/switches/:id") {
-		action: [
-			GET: "showSwitch"
-		]
-	}
-    path("/switches/:id/:command") {
-		action: [
-			GET: "updateSwitch"
-		]
-	}
-	path("/switches/:id/:command/:level") {
-		action: [
-			GET: "updateSwitch"
-		]
-	}
-	path("/locks") {
-		action: [
-			GET: "listLocks"
-		]
-	}
-	path("/locks/:id") {
-		action: [
-			GET: "showLock"
-		]
-	}
-	path("/locks/:id/:command") {
-		action: [
-			GET: "updateLock"
-		]
-	}
-    path("/doors/:id") {
-		action: [
-			GET: "showDoor"
-		]
-	}
-   	path("/doors/:id/:command") {
-		action: [
-			GET: "updateDoor"
-		]
-	}
-	path("/garagedoors/:id") {
-		action: [
-			GET: "showGarageDoor"
-		]
-	}
-   	path("/garagedoors/:id/:command") {
-		action: [
-			GET: "updateGarageDoor"
-		]
-	}
-    path("/cameras/:id") {
-		action: [
-			GET: "showCamera"
-		]
-	}  
-    path("/cameras/:id/:command") {
-		action: [
-			GET: "updateCamera"
-		]
-	}  
-}
-
-def installed() {}
-
-def updated() {}
-
-def listDevices() {
-	log.debug "entering listDevices"
-    //return listSwitches() + listLocks() + listGarageDoors() + listDoors() + listCameras()
-    return listSwitches() + listLocks() + listGarageDoors() + listCameras()
-}
-
-//switches
-def listSwitches() {
-    log.debug "entering listSwitches"
-	switches.collect{showDevice(it,"switch")}
-}
-
-def showSwitch() {
-	log.debug "entering showSwitches"
-	show(switches, "switch")
-}
-
-def updateSwitch() {
-	log.debug "entering updateSwitches"
-	update(switches, "switch")
-}
-
-//locks
-def listLocks() {
-	log.debug "entering listLocks"
-	locks.collect{showDevice(it,"lock")}
-}
-
-def showLock() {
-	log.debug "entering showLock"
-	show(locks, "lock")
-}
-
-def updateLock() {
-	log.debug "entering updateLock"
-	update(locks, "lock")
-}
-
-//doors
-def listDoors() {
-	log.debug "entering listDoors"
-	locks.collect{showDevice(it,"door")}
-}
-
-def showDoor() {
-	log.debug "entering showDoors"
-	show(doors, "door")
-}
-
-def updateDoor() {
-	log.debug "entering updateDoor"
-	update(doors, "door")
-}
-
-//garagedoors
-def listGarageDoors() {
-	log.debug "entering listGarageDoors"
-	locks.collect{showDevice(it,"garagedoor")}
-}
-
-def showGarageDoor() {
-	log.debug "entering showGarageDoors"
-	show(garagedoors, "garagedoor")
-}
-
-def updateGarageDoor() {
-	log.debug "entering updateGarageDoor"
-	update(gargedoors, "garagedoor")
-}
-
-//cameras
-def listCameras() {
-	log.debug "entering listCameras"
-	cameras.collect{showDevice(it,"image")}
-}
-
-def showCamera() {
-	log.debug "entering showCameras"
-	show(cameras, "camera")
-}
-
-def updateCamera() {
-	log.debug "entering updateCamera"
-	update(cameras, "camera")
-}
-
-def deviceHandler(evt) {}
-
-private update(devices, type) {
-	def rc = null
-
-	//def command = request.JSON?.command
-    def command = params.command
-    
-    log.debug "update, request: params: ${params}, devices: $devices.id type=$type command=$command"
-    
-    // Process the command.
-	if (command) 
-    {
-		def dev = devices.find { it.id == params.id }
-		if (!dev) {
-			httpError(404, "Device not found: $params.id")
-		} else if (type == "switch") {
-			switch(command) {
-			    case "on":
-			    	rc = dev.on()
-			    	break
-			    case "off":
-			    	rc = dev.off()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		} else if (type == "lock") {
-			switch(command) {
-			    case "lock":
-			    	rc = dev.lock()
-			    	break
-			    case "unlock":
-			    	rc = dev.unlock()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device:=$it.id $dev")
-			}
-		} else if (type == "door") {
-			switch(command) {
-			    case "open":
-			    	rc = dev.open()
-			    	break
-			    case "close":
-			    	rc = dev.close()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		} else if (type == "garagedoor") {
-			switch(command) {
-			    case "open":
-			    	rc = dev.open()
-			    	break
-			    case "close":
-			    	rc = dev.close()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		} else if (type == "camera") {
-			switch(command) {
-			    case "take":
-			    	rc = dev.take()
-			    	log.debug "Device command=$command device=$it.id $dev current image=$it.currentImage"
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		}
-
-		log.debug "executed device=$it.id $dev command=$command rc=$rc"
-        
-        // Check that the device is a switch that is currently on, supports 'setLevel"
-        // and that a level was specified.
-        int level = params.level ? params.level as int : -1;
-        if ((type == "switch") && (dev.currentValue('switch') == "on") && hasLevel(dev) && (level != -1)) {            
-            log.debug "device about to setLevel=$level"
-            dev.setLevel(level);
-        }
-        
-        // Show the device info if necessary.
-        if (rc == null) {
-        	rc = showDevice(dev, type)
-        }
-	}
-    
-    return rc
-}
-
-private show(devices, type) {
-	def dev = devices.find { it.id == params.id }
-	if (!dev) {
-		httpError(404, "Device not found")
-	} else { 
-        // Show the device info.
-        showDevice(dev, type)
-	}
-}
-
-private showDevice(it, type) {
-	def props = null
-
-	// Get the current state for the device type.
-	def state = [it.currentState(type)]
-    
-	// Check that whether the a switch device with level support is located and update the returned device type.
-    def devType =  type
-    
-    if (type == "switch" && hasLevel(it)) {
-    	// Assign "switchWithLevel" to device type.
-    	devType = "switchWithLevel"
-        // Add the level state.
-        def levelState = it.currentState("level")
-        if (levelState) {
-        	state.add(levelState)
-        }
-    }
-    
-    log.debug "device label=$it.label type=$devType"
-    
-    // Assign the device item properties if appropriate.
-    if (it) {
-    	props = [id: it.id, label: it.label, type: devType, state: state]
-        // Add the hub information to the device properties
-        // if appropriate.
-        if (it.hub) {
-        	props.put("location", it.hub.hub.location)
-        }
-        if (it.currentImage) {
-        	props.put("currentImage", it.currentImage)
-        }
-    }
-    
-    return props
-}
-
-private hasLevel(device) {
-    // Default return value.
-    def rc = false;
-
-	// Get the device supported commands.
-    def supportedCommands = device.supportedCommands
-    
-    // Check to see if the "setLevel" was found and assign
-    // the appropriate return value.
-    if (supportedCommands) {
-        // Find the "setLevel" command. 
-        rc = supportedCommands.toString().indexOf("setLevel") != -1
-    }
-    
-    log.debug "hasLevel device label=$device.label supportedCommands=$supportedCommands rc=$rc"
-            
-    return rc
-}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -30,6 +30,7 @@ definition(
 preferences {
 	page(name:"mainPage", title:"Hue Device Setup", content:"mainPage", refreshTimeout:5)
 	page(name:"bridgeDiscovery", title:"Hue Bridge Discovery", content:"bridgeDiscovery", refreshTimeout:5)
+	page(name:"bridgeDiscoveryFailed", title:"Bridge Discovery Failed", content:"bridgeDiscoveryFailed", refreshTimeout:0)
 	page(name:"bridgeBtnPush", title:"Linking with your Hue", content:"bridgeLinking", refreshTimeout:5)
 	page(name:"bulbDiscovery", title:"Hue Device Setup", content:"bulbDiscovery", refreshTimeout:5)
 }
@@ -53,12 +54,21 @@ def bridgeDiscovery(params=[:])
 	def options = bridges ?: []
 	def numFound = options.size() ?: 0
 
-	if (numFound == 0 && state.bridgeRefreshCount > 25) {
-    	log.trace "Cleaning old bridges memory"
-    	state.bridges = [:]
-        state.bridgeRefreshCount = 0
-        app.updateSetting("selectedHue", "")
-    }
+	if (numFound == 0) {
+		if (state.bridgeRefreshCount == 25) {
+			log.trace "Cleaning old bridges memory"
+			state.bridges = [:]
+			app.updateSetting("selectedHue", "")
+		} else if (state.bridgeRefreshCount > 100) {
+			// five minutes have passed, give up
+			// there seems to be a problem going back from discovey failed page in some instances (compared to pressing next)
+			// however it is probably a SmartThings settings issue
+			state.bridges = [:]
+			app.updateSetting("selectedHue", "")
+			state.bridgeRefreshCount = 0
+			return bridgeDiscoveryFailed()
+		}
+	}
 
 	ssdpSubscribe()
 
@@ -79,6 +89,13 @@ def bridgeDiscovery(params=[:])
 	}
 }
 
+def bridgeDiscoveryFailed() {
+	return dynamicPage(name:"bridgeDiscoveryFailed", title: "Bridge Discovery Failed", nextPage: "bridgeDiscovery") {
+		section("Failed to discover any Hue Bridges. Please confirm that the Hue Bridge is connected to the same network as your SmartThings Hub, and that it has power.") {
+		}
+	}
+}
+
 def bridgeLinking()
 {
 	int linkRefreshcount = !state.linkRefreshcount ? 0 : state.linkRefreshcount as int
@@ -88,19 +105,15 @@ def bridgeLinking()
 	def nextPage = ""
 	def title = "Linking with your Hue"
     def paragraphText
-    def hueimage = null
 	if (selectedHue) {
 		paragraphText = "Press the button on your Hue Bridge to setup a link. "
-        hueimage = "http://huedisco.mediavibe.nl/wp-content/uploads/2013/09/pair-bridge.png"
     } else {
     	paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
-        hueimage = null
     }
 	if (state.username) { //if discovery worked
 		nextPage = "bulbDiscovery"
 		title = "Success!"
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
-        hueimage = null
 	}
 
 	if((linkRefreshcount % 2) == 0 && !state.username) {
@@ -110,8 +123,6 @@ def bridgeLinking()
 	return dynamicPage(name:"bridgeBtnPush", title:title, nextPage:nextPage, refreshInterval:refreshInterval) {
 		section("") {
 			paragraph """${paragraphText}"""
-            if (hueimage != null)
-            	image "${hueimage}"
 		}
 	}
 }
@@ -135,13 +146,14 @@ def bulbDiscovery() {
 	if((bulbRefreshCount % 5) == 0) {
 		discoverHueBulbs()
 	}
+	def selectedBridge = state.bridges.find { key, value -> value?.serialNumber?.equalsIgnoreCase(selectedHue) }
+	def title = selectedBridge?.value?.name ?: "Find bridges"
 
 	return dynamicPage(name:"bulbDiscovery", title:"Bulb Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 		section("Please wait while we discover your Hue Bulbs. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:bulboptions
 		}
 		section {
-			def title = getBridgeIP() ? "Hue bridge (${getBridgeIP()})" : "Find bridges"
 			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
 
 		}
@@ -323,6 +335,8 @@ private getDeviceType(hueType) {
 		return "Hue Bulb"
 	else if (hueType?.equalsIgnoreCase("Color Light"))
 		return "Hue Bloom"
+	else if (hueType?.equalsIgnoreCase("Color Temperature Light"))
+		return "Hue White Ambiance Bulb"
 	else
 		return null
 }
@@ -346,26 +360,29 @@ def addBulbs() {
 			def newHueBulb
 			if (bulbs instanceof java.util.Map) {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
-                if (newHueBulb != null) {
-                    d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
+
+				if (newHueBulb != null) {
+					d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
 					if (d) {
 						log.debug "created ${d.displayName} with id $dni"
+						d.completedSetup = true
 						d.refresh()
 					}
-                } else {
-                	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
-                }
+				} else {
+					log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
+				}
 			} else {
-            	//backwards compatable
+			 	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
+				d?.completedSetup = true
 				d?.refresh()
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
 			if (bulbs instanceof java.util.Map) {
 				// Update device type if incorrect
-            	def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
+				def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
 				upgradeDeviceType(d, newHueBulb?.value?.type)
 			}
 		}
@@ -397,6 +414,7 @@ def addBridge() {
             }
         	if (newbridge) {
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub)
+				d?.completedSetup = true
  				log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
                 def childDevice = getChildDevice(d.deviceNetworkId)
                 childDevice.sendEvent(name: "serialNumber", value: vbridge.value.serialNumber)
@@ -484,7 +502,21 @@ void bridgeDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
 		def bridges = getHueBridges()
 		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
 		if (bridge) {
-			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
+			// serialNumber from API is in format of 0017882413ad (mac address), however on the actual bridge only last six
+			// characters are printed on the back so using that to identify bridge
+			def idNumber = body?.device?.serialNumber?.text()
+			if (idNumber?.size() >= 6)
+				idNumber = idNumber[-6..-1].toUpperCase()
+
+			// usually in form of bridge name followed by (ip), i.e. defaults to Philips Hue (192.168.1.2)
+			// replace IP with serial number to make it easier for user to identify
+			def name = body?.device?.friendlyName?.text()
+			def index = name?.indexOf('(')
+			if (index != -1) {
+				name = name.substring(0,index)
+				name += " ($idNumber)"
+			}
+			bridge.value << [name:name, serialNumber:body?.device?.serialNumber?.text(), verified: true]
 		} else {
 			log.error "/description.xml returned a bridge that didn't exist"
 		}

smartapps/smartthings/ubi.src/ubi.groovy

@@ -107,8 +107,8 @@ mappings {
 	path("/locks") {
 		action: [
 			GET: "listLocks",
-			PUT: "updateLock",
-			POST: "updateLock"
+			PUT: "updateLocks",
+			POST: "updateLocks"
 		]
 	}
 	path("/locks/:id") {
@@ -442,31 +442,87 @@ def executePhrase() {
 }
 
 private void updateAll(devices) {
+	def type = params.param1
 	def command = request.JSON?.command
-	if (command)
-	{
-		command = command.toLowerCase()
-		devices."$command"()
+	if (!devices) {
+		httpError(404, "Devices not found")
+	}
+	if (command){
+		devices.each { device ->
+			executeCommand(device, type, command)
+		}
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
-	//def command = request.JSON?.command
-	def command = params.command
-	if (command)
-	{
-		command = command.toLowerCase()
-		def device = devices.find { it.id == params.id }
-		if (!device)
-		{
+	def type = params.param1
+	def command = request.JSON?.command
+	def device = devices?.find { it.id == params.id }
+
+	if (!device) {
 			httpError(404, "Device not found")
-		}
-		else
-		{
-			device."$command"()
-		}
 	}
+
+	if (command) {
+		executeCommand(device, type, command)
+	}
+}
+
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, deviceType, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(deviceType)
+	if (capabilityCommands[currentDeviceCapability]) {
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
+	}
+}
+
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(type) {
+    switch(type) {
+		case "switches":
+			return "Switch"
+		case "locks":
+			return "Lock"
+		default:
+			return type
+	}
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
+/**
+ * Validates and executes the command
+ * on the device or devices
+ */
+def executeCommand(device, type, command) {
+	if (validateCommand(device, type, command)) {
+		device."$command"()
+	} else {
+		httpError(403, "Access denied. This command is not supported by current capability.")
+	}	
 }
 
 private show(devices, type) {