MSA-1349: A full-featured, easy to use interface for programming your thermostat based on schedule setpoints and mode changes.

Rolling down staging hotfix to master

devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy

@@ -21,6 +21,7 @@ metadata {
         attribute "tamper", "enum", ["detected", "clear"]
         attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
+        fingerprint mfr:"010F", prod:"0C02", model:"1002"
     }
     simulator {
         //battery

devicetypes/smartthings/hue-white-ambiance-bulb/hue-white-ambiance-bulb.groovy

@@ -0,0 +1,110 @@
+/**
+ *  Hue White Ambiance Bulb
+ *
+ *  Philips Hue Type "Color Temperature Light"
+ *
+ *  Author: SmartThings
+ */
+
+// for the UI
+metadata {
+    // Automatically generated. Make future change here.
+    definition (name: "Hue White Ambiance Bulb", namespace: "smartthings", author: "SmartThings") {
+        capability "Switch Level"
+        capability "Actuator"
+        capability "Color Temperature"
+        capability "Switch"
+        capability "Refresh"
+
+        command "refresh"
+    }
+
+    simulator {
+        // TODO: define status and reply messages here
+    }
+
+    tiles (scale: 2){
+        multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+        standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["rich-control"])
+        details(["rich-control", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+// parse events into attributes
+def parse(description) {
+    log.debug "parse() - $description"
+    def results = []
+
+    def map = description
+    if (description instanceof String)  {
+        log.debug "Hue Ambience Bulb stringToMap - ${map}"
+        map = stringToMap(description)
+    }
+
+    if (map?.name && map?.value) {
+        results << createEvent(name: "${map?.name}", value: "${map?.value}")
+    }
+    results
+}
+
+// handle commands
+void on() {
+    log.trace parent.on(this)
+    sendEvent(name: "switch", value: "on")
+}
+
+void off() {
+    log.trace parent.off(this)
+    sendEvent(name: "switch", value: "off")
+}
+
+void setLevel(percent) {
+    log.debug "Executing 'setLevel'"
+    if (percent != null && percent >= 0 && percent <= 100) {
+        parent.setLevel(this, percent)
+        sendEvent(name: "level", value: percent)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "$percent is not 0-100"
+    }
+}
+
+void setColorTemperature(value) {
+    if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "Invalid color temperature"
+    }
+}
+
+void refresh() {
+    log.debug "Executing 'refresh'"
+    parent.manualRefresh()
+}
+

devicetypes/smartthings/smartsense-motion-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -0,0 +1,30 @@
+# Smartsense Motion Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartThings Motion Sensor](https://shop.smartthings.com/#!/products/samsung-smartthings-motion-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health]($health)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Motion Sensor** - can detect motion
+* **Battery** - defines device uses a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C2 motion sensor that has 120min check-in interval
+
+
+
+
+
+

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -403,39 +403,21 @@ def refresh() {
 
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		log.debug "Refreshing Values for manufacturer: SmartThings "
-		refreshCmds = refreshCmds + [
-			/* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
-				seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
-				Separating these out in a separate if-else because I do not want to touch Centralite part
-				as of now.
-			*/
-
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 0 0x20 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-		]
+		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
+            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
+            Separating these out in a separate if-else because I do not want to touch Centralite part
+            as of now.
+        */
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
 	} else {
-		refreshCmds = refreshCmds + [
-			/* sensitivity - default value (8) */
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 0 0x20 {02}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-		]
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
 	}
 
 	//Common refresh commands
-	refreshCmds = refreshCmds + [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global read 0xFC02 0x0010",
-		"send 0x${device.deviceNetworkId} 1 1","delay 400"
-	]
+	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
+			zigbee.readAttribute(0x0001, 0x0020) +
+			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
 
 	return refreshCmds + enrollResponse()
 }
@@ -443,38 +425,15 @@ def refresh() {
 def configure() {
 	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting"
 
-	def configCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-		]
+	def configCmds = enrollResponse() +
+			zigbee.batteryConfig() +
+			zigbee.temperatureConfig() +
+			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
 
 	return configCmds + refresh()
 }

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -21,6 +21,13 @@ metadata {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
+
+		fingerprint mfr: "011F", prod: "0001", model: "0001", deviceJoinName: "Schlage Motion Sensor"  // Schlage motion
+		fingerprint mfr: "014A", prod: "0001", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion
+		fingerprint mfr: "014A", prod: "0004", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion +
+		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
+		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
+		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
 	}
 
 	simulator {
@@ -125,9 +132,9 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	}
 	if (!state.lastbat || (new Date().time) - state.lastbat > 53*60*60*1000) {
 		result << response(zwave.batteryV1.batteryGet())
-		result << response("delay 1200")
+	} else {
+		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	}
-	result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	result
 }
 

smartapps/com-gidjit-smartthings-hub/gidjit-hub.src/gidjit-hub.groovy

@@ -0,0 +1,252 @@
+/**
+ *  Gidjit Hub
+ *
+ *  Copyright 2016 Matthew Page
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Gidjit Hub",
+    namespace: "com.gidjit.smartthings.hub",
+    author: "Matthew Page",
+    description: "Act as an endpoint so user's of Gidjit can quickly access and control their devices and execute routines. Users can do this quickly as Gidjit filters these actions  based on their environment",
+    category: "Convenience",
+    iconUrl: "http://www.gidjit.com/appicon.png",
+    iconX2Url: "http://www.gidjit.com/appicon@2x.png",
+    iconX3Url: "http://www.gidjit.com/appicon@3x.png",
+    oauth: [displayName: "Gidjit", displayLink: "www.gidjit.com"])
+
+
+
+preferences {
+  section ("Allow Gidjit to have access, there by allowing you to quickly control and monitor the following devices") {
+    input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
+    input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
+    input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
+    //input "bulbs", "capability.colorControl", title: "Control your lights", multiple: true, required: false //windowShade
+
+  }
+}
+mappings {
+  path("/structureinfo") {
+    action: [
+      GET: "structureInfo"
+    ]
+  }
+  path("/helloactions") {
+    action: [
+      GET: "helloActions"
+    ]
+  }
+  path("/helloactions/:label") {
+    action: [
+      PUT: "executeAction"
+    ]
+  }
+
+  path("/switch/:id/:command") {
+    action: [
+      PUT: "updateSwitch"
+    ]
+  }
+
+  path("/thermostat/:id/:command") {
+    action: [
+      PUT: "updateThermostat"
+    ]
+  }
+
+  path("/windowshade/:id/:command") {
+    action: [
+      PUT: "updateWindowShade"
+    ]
+  }
+  path("/acquiredata/:id") {
+    action: [
+      GET: "acquiredata"
+    ]
+  }
+}
+
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// subscribe to attributes, devices, locations, etc.
+}
+def helloActions() {
+	def actions = location.helloHome?.getPhrases()*.label
+    if(!actions) {
+    	return []
+    }
+	return actions
+}
+def executeAction() {
+    def actions = location.helloHome?.getPhrases()*.label
+    def a = actions?.find() { it == params.label }
+    if (!a) {
+        httpError(400, "invalid label $params.label")
+        return
+    }
+    location.helloHome?.execute(params.label)
+}
+/*  this is the primary function called to query at the structure and its devices */
+def structureInfo() { //list all devices
+	def list = [:]
+    def currId = location.id
+    list[currId] = [:]
+    list[currId].name = location.name
+    list[currId].id = location.id
+    list[currId].temperatureScale = location.temperatureScale
+    list[currId].devices = [:]
+  
+    def setValues = {
+   		if (params.brief) {
+            return [id: it.id, name: it.displayName]
+        }
+        def newList = [id: it.id, name: it.displayName, suppCapab: it.capabilities.collect {
+            "$it.name"
+        }, suppAttributes: it.supportedAttributes.collect {
+            "$it.name"      
+        }, suppCommands: it.supportedCommands.collect {
+            "$it.name"      
+        }]
+
+        return newList
+    }
+    switches?.each {
+      list[currId].devices[it.id] = setValues(it)
+    }
+    thermostats?.each {
+      list[currId].devices[it.id] = setValues(it)
+    }
+    windowShades?.each {
+      list[currId].devices[it.id] = setValues(it)
+    }
+
+    return list
+
+}
+/*  This function returns all of the current values of the specified Devices attributes */
+def acquiredata() {
+	def resp = [:]
+    if (!params.id) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    def dev = switches.find() { it.id == params.id } ?: windowShades.find() { it.id == params.id } ?:
+    	thermostats.find() { it.id == params.id }    
+   
+    if (!dev) {
+    	httpError(400, "invalid id $params.id")
+        return    
+    }
+    def att = dev.supportedAttributes
+    att.each {
+    	resp[it.name] = dev.currentValue("$it.name")
+    }
+    return resp
+}
+
+void updateSwitch() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+	def sw = switches.find() { it.id == params.id }
+    if (!sw) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    switch(command) {
+        case "on":
+        	if ( sw.currentSwitch != "on" ) {
+            	sw.on()
+            }
+            break
+        case "off":
+        	if ( sw.currentSwitch != "off" ) {
+            	sw.off()
+            }
+            break
+        default:
+            httpError(400, "$command is not a valid")
+    }
+}
+
+
+void updateThermostat() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+	def therm = thermostats.find() { it.id == params.id }
+    if (!therm || !command) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    def passComm = [
+        "off",
+        "heat",
+        "emergencyHeat",
+        "cool",
+        "fanOn",
+        "fanAuto",
+        "fanCirculate",
+        "auto"
+
+	]
+    def passNumParamComm = [
+    	"setHeatingSetpoint",
+    	"setCoolingSetpoint",   
+    ]
+    def passStringParamComm = [
+        "setThermostatMode",
+        "setThermostatFanMode",
+	]
+    if (command in passComm) {
+    	therm."$command"()	
+    } else if (command in passNumParamComm && params.p1 && params.p1.isFloat()) {
+    	therm."$command"(Float.parseFloat(params.p1))	
+    } else if (command in passStringParamComm && params.p1) {
+    	therm."$command"(params.p1)	
+    } else {
+    	httpError(400, "$command is not a valid command")
+    }
+}
+
+void updateWindowShade() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+	def ws = windowShades.find() { it.id == params.id }
+    if (!ws || !command) {
+    	httpError(400, "invalid id $params.id")
+        return
+    }
+    def passComm = [
+		"open",
+        "close",
+        "presetPosition",
+	]
+    if (command in passComm) {
+    	ws."$command"()		
+    } else {
+    	httpError(400, "$command is not a valid command")
+    }
+}
+// TODO: implement event handlers

smartapps/prempoint-com/prempoint.src/prempoint.groovy

@@ -1,345 +0,0 @@
-/**
- *  SmartThings service for Prempoint
- *
- *  Author: Prempoint Inc. (c) 2016
- *   
- */
-definition(
-    name: "Prempoint",
-    namespace: "prempoint.com",
-    author: "Prempoint Inc.",
-    description: "SmartThings service for Prempoint",
-    category: "Connections",
-    iconUrl: "http://www.prempoint.com/images/social_app_emblem_50x50.png",
-    iconX2Url: "http://www.prempoint.com/images/social_app_emblem_100x100.png",
-    iconX3Url: "http://www.prempoint.com/images/social_app_emblem_150x150.png",
-    oauth: [displayName: "Prempoint", displayLink: "http://www.prempoint.com/"])
-
-preferences {
-	section("Allow Prempoint to Control & Access These Things...") {
-		input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
-        input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-        input "garagedoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
-        //input "doors", "capability.doorControl", title: "Which Doors?", multiple: true, required: false
-        input "cameras", "capability.imageCapture", title: "Which Cameras?", multiple: true, required: false
-	}
-}
-
-mappings {
-	path("/list") {
-		action: [
-			GET: "listDevices"
-		]
-	}
-	path("/switches") {
-		action: [
-			GET: "listSwitches"
-		]
-	}
-	path("/switches/:id") {
-		action: [
-			GET: "showSwitch"
-		]
-	}
-    path("/switches/:id/:command") {
-		action: [
-			GET: "updateSwitch"
-		]
-	}
-	path("/switches/:id/:command/:level") {
-		action: [
-			GET: "updateSwitch"
-		]
-	}
-	path("/locks") {
-		action: [
-			GET: "listLocks"
-		]
-	}
-	path("/locks/:id") {
-		action: [
-			GET: "showLock"
-		]
-	}
-	path("/locks/:id/:command") {
-		action: [
-			GET: "updateLock"
-		]
-	}
-    path("/doors/:id") {
-		action: [
-			GET: "showDoor"
-		]
-	}
-   	path("/doors/:id/:command") {
-		action: [
-			GET: "updateDoor"
-		]
-	}
-	path("/garagedoors/:id") {
-		action: [
-			GET: "showGarageDoor"
-		]
-	}
-   	path("/garagedoors/:id/:command") {
-		action: [
-			GET: "updateGarageDoor"
-		]
-	}
-    path("/cameras/:id") {
-		action: [
-			GET: "showCamera"
-		]
-	}  
-    path("/cameras/:id/:command") {
-		action: [
-			GET: "updateCamera"
-		]
-	}  
-}
-
-def installed() {}
-
-def updated() {}
-
-def listDevices() {
-	log.debug "entering listDevices"
-    //return listSwitches() + listLocks() + listGarageDoors() + listDoors() + listCameras()
-    return listSwitches() + listLocks() + listGarageDoors() + listCameras()
-}
-
-//switches
-def listSwitches() {
-    log.debug "entering listSwitches"
-	switches.collect{showDevice(it,"switch")}
-}
-
-def showSwitch() {
-	log.debug "entering showSwitches"
-	show(switches, "switch")
-}
-
-def updateSwitch() {
-	log.debug "entering updateSwitches"
-	update(switches, "switch")
-}
-
-//locks
-def listLocks() {
-	log.debug "entering listLocks"
-	locks.collect{showDevice(it,"lock")}
-}
-
-def showLock() {
-	log.debug "entering showLock"
-	show(locks, "lock")
-}
-
-def updateLock() {
-	log.debug "entering updateLock"
-	update(locks, "lock")
-}
-
-//doors
-def listDoors() {
-	log.debug "entering listDoors"
-	locks.collect{showDevice(it,"door")}
-}
-
-def showDoor() {
-	log.debug "entering showDoors"
-	show(doors, "door")
-}
-
-def updateDoor() {
-	log.debug "entering updateDoor"
-	update(doors, "door")
-}
-
-//garagedoors
-def listGarageDoors() {
-	log.debug "entering listGarageDoors"
-	locks.collect{showDevice(it,"garagedoor")}
-}
-
-def showGarageDoor() {
-	log.debug "entering showGarageDoors"
-	show(garagedoors, "garagedoor")
-}
-
-def updateGarageDoor() {
-	log.debug "entering updateGarageDoor"
-	update(gargedoors, "garagedoor")
-}
-
-//cameras
-def listCameras() {
-	log.debug "entering listCameras"
-	cameras.collect{showDevice(it,"image")}
-}
-
-def showCamera() {
-	log.debug "entering showCameras"
-	show(cameras, "camera")
-}
-
-def updateCamera() {
-	log.debug "entering updateCamera"
-	update(cameras, "camera")
-}
-
-def deviceHandler(evt) {}
-
-private update(devices, type) {
-	def rc = null
-
-	//def command = request.JSON?.command
-    def command = params.command
-    
-    log.debug "update, request: params: ${params}, devices: $devices.id type=$type command=$command"
-    
-    // Process the command.
-	if (command) 
-    {
-		def dev = devices.find { it.id == params.id }
-		if (!dev) {
-			httpError(404, "Device not found: $params.id")
-		} else if (type == "switch") {
-			switch(command) {
-			    case "on":
-			    	rc = dev.on()
-			    	break
-			    case "off":
-			    	rc = dev.off()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		} else if (type == "lock") {
-			switch(command) {
-			    case "lock":
-			    	rc = dev.lock()
-			    	break
-			    case "unlock":
-			    	rc = dev.unlock()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device:=$it.id $dev")
-			}
-		} else if (type == "door") {
-			switch(command) {
-			    case "open":
-			    	rc = dev.open()
-			    	break
-			    case "close":
-			    	rc = dev.close()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		} else if (type == "garagedoor") {
-			switch(command) {
-			    case "open":
-			    	rc = dev.open()
-			    	break
-			    case "close":
-			    	rc = dev.close()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		} else if (type == "camera") {
-			switch(command) {
-			    case "take":
-			    	rc = dev.take()
-			    	log.debug "Device command=$command device=$it.id $dev current image=$it.currentImage"
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		}
-
-		log.debug "executed device=$it.id $dev command=$command rc=$rc"
-        
-        // Check that the device is a switch that is currently on, supports 'setLevel"
-        // and that a level was specified.
-        int level = params.level ? params.level as int : -1;
-        if ((type == "switch") && (dev.currentValue('switch') == "on") && hasLevel(dev) && (level != -1)) {            
-            log.debug "device about to setLevel=$level"
-            dev.setLevel(level);
-        }
-        
-        // Show the device info if necessary.
-        if (rc == null) {
-        	rc = showDevice(dev, type)
-        }
-	}
-    
-    return rc
-}
-
-private show(devices, type) {
-	def dev = devices.find { it.id == params.id }
-	if (!dev) {
-		httpError(404, "Device not found")
-	} else { 
-        // Show the device info.
-        showDevice(dev, type)
-	}
-}
-
-private showDevice(it, type) {
-	def props = null
-
-	// Get the current state for the device type.
-	def state = [it.currentState(type)]
-    
-	// Check that whether the a switch device with level support is located and update the returned device type.
-    def devType =  type
-    
-    if (type == "switch" && hasLevel(it)) {
-    	// Assign "switchWithLevel" to device type.
-    	devType = "switchWithLevel"
-        // Add the level state.
-        def levelState = it.currentState("level")
-        if (levelState) {
-        	state.add(levelState)
-        }
-    }
-    
-    log.debug "device label=$it.label type=$devType"
-    
-    // Assign the device item properties if appropriate.
-    if (it) {
-    	props = [id: it.id, label: it.label, type: devType, state: state]
-        // Add the hub information to the device properties
-        // if appropriate.
-        if (it.hub) {
-        	props.put("location", it.hub.hub.location)
-        }
-        if (it.currentImage) {
-        	props.put("currentImage", it.currentImage)
-        }
-    }
-    
-    return props
-}
-
-private hasLevel(device) {
-    // Default return value.
-    def rc = false;
-
-	// Get the device supported commands.
-    def supportedCommands = device.supportedCommands
-    
-    // Check to see if the "setLevel" was found and assign
-    // the appropriate return value.
-    if (supportedCommands) {
-        // Find the "setLevel" command. 
-        rc = supportedCommands.toString().indexOf("setLevel") != -1
-    }
-    
-    log.debug "hasLevel device label=$device.label supportedCommands=$supportedCommands rc=$rc"
-            
-    return rc
-}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -30,6 +30,7 @@ definition(
 preferences {
 	page(name:"mainPage", title:"Hue Device Setup", content:"mainPage", refreshTimeout:5)
 	page(name:"bridgeDiscovery", title:"Hue Bridge Discovery", content:"bridgeDiscovery", refreshTimeout:5)
+	page(name:"bridgeDiscoveryFailed", title:"Bridge Discovery Failed", content:"bridgeDiscoveryFailed", refreshTimeout:0)
 	page(name:"bridgeBtnPush", title:"Linking with your Hue", content:"bridgeLinking", refreshTimeout:5)
 	page(name:"bulbDiscovery", title:"Hue Device Setup", content:"bulbDiscovery", refreshTimeout:5)
 }
@@ -53,12 +54,21 @@ def bridgeDiscovery(params=[:])
 	def options = bridges ?: []
 	def numFound = options.size() ?: 0
 
-	if (numFound == 0 && state.bridgeRefreshCount > 25) {
-    	log.trace "Cleaning old bridges memory"
-    	state.bridges = [:]
-        state.bridgeRefreshCount = 0
-        app.updateSetting("selectedHue", "")
-    }
+	if (numFound == 0) {
+		if (state.bridgeRefreshCount == 25) {
+			log.trace "Cleaning old bridges memory"
+			state.bridges = [:]
+			app.updateSetting("selectedHue", "")
+		} else if (state.bridgeRefreshCount > 100) {
+			// five minutes have passed, give up
+			// there seems to be a problem going back from discovey failed page in some instances (compared to pressing next)
+			// however it is probably a SmartThings settings issue
+			state.bridges = [:]
+			app.updateSetting("selectedHue", "")
+			state.bridgeRefreshCount = 0
+			return bridgeDiscoveryFailed()
+		}
+	}
 
 	ssdpSubscribe()
 
@@ -79,6 +89,13 @@ def bridgeDiscovery(params=[:])
 	}
 }
 
+def bridgeDiscoveryFailed() {
+	return dynamicPage(name:"bridgeDiscoveryFailed", title: "Bridge Discovery Failed", nextPage: "bridgeDiscovery") {
+		section("Failed to discover any Hue Bridges. Please confirm that the Hue Bridge is connected to the same network as your SmartThings Hub, and that it has power.") {
+		}
+	}
+}
+
 def bridgeLinking()
 {
 	int linkRefreshcount = !state.linkRefreshcount ? 0 : state.linkRefreshcount as int
@@ -88,19 +105,15 @@ def bridgeLinking()
 	def nextPage = ""
 	def title = "Linking with your Hue"
     def paragraphText
-    def hueimage = null
 	if (selectedHue) {
 		paragraphText = "Press the button on your Hue Bridge to setup a link. "
-        hueimage = "http://huedisco.mediavibe.nl/wp-content/uploads/2013/09/pair-bridge.png"
     } else {
     	paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
-        hueimage = null
     }
 	if (state.username) { //if discovery worked
 		nextPage = "bulbDiscovery"
 		title = "Success!"
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
-        hueimage = null
 	}
 
 	if((linkRefreshcount % 2) == 0 && !state.username) {
@@ -110,8 +123,6 @@ def bridgeLinking()
 	return dynamicPage(name:"bridgeBtnPush", title:title, nextPage:nextPage, refreshInterval:refreshInterval) {
 		section("") {
 			paragraph """${paragraphText}"""
-            if (hueimage != null)
-            	image "${hueimage}"
 		}
 	}
 }
@@ -135,13 +146,14 @@ def bulbDiscovery() {
 	if((bulbRefreshCount % 5) == 0) {
 		discoverHueBulbs()
 	}
+	def selectedBridge = state.bridges.find { key, value -> value?.serialNumber?.equalsIgnoreCase(selectedHue) }
+	def title = selectedBridge?.value?.name ?: "Find bridges"
 
 	return dynamicPage(name:"bulbDiscovery", title:"Bulb Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 		section("Please wait while we discover your Hue Bulbs. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:bulboptions
 		}
 		section {
-			def title = getBridgeIP() ? "Hue bridge (${getBridgeIP()})" : "Find bridges"
 			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
 
 		}
@@ -323,6 +335,8 @@ private getDeviceType(hueType) {
 		return "Hue Bulb"
 	else if (hueType?.equalsIgnoreCase("Color Light"))
 		return "Hue Bloom"
+	else if (hueType?.equalsIgnoreCase("Color Temperature Light"))
+		return "Hue White Ambiance Bulb"
 	else
 		return null
 }
@@ -346,26 +360,29 @@ def addBulbs() {
 			def newHueBulb
 			if (bulbs instanceof java.util.Map) {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
-                if (newHueBulb != null) {
-                    d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
+
+				if (newHueBulb != null) {
+					d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
 					if (d) {
 						log.debug "created ${d.displayName} with id $dni"
+						d.completedSetup = true
 						d.refresh()
 					}
-                } else {
-                	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
-                }
+				} else {
+					log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
+				}
 			} else {
-            	//backwards compatable
+			 	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
+				d?.completedSetup = true
 				d?.refresh()
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
 			if (bulbs instanceof java.util.Map) {
 				// Update device type if incorrect
-            	def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
+				def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
 				upgradeDeviceType(d, newHueBulb?.value?.type)
 			}
 		}
@@ -397,6 +414,7 @@ def addBridge() {
             }
         	if (newbridge) {
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub)
+				d?.completedSetup = true
  				log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
                 def childDevice = getChildDevice(d.deviceNetworkId)
                 childDevice.sendEvent(name: "serialNumber", value: vbridge.value.serialNumber)
@@ -484,7 +502,21 @@ void bridgeDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
 		def bridges = getHueBridges()
 		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
 		if (bridge) {
-			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
+			// serialNumber from API is in format of 0017882413ad (mac address), however on the actual bridge only last six
+			// characters are printed on the back so using that to identify bridge
+			def idNumber = body?.device?.serialNumber?.text()
+			if (idNumber?.size() >= 6)
+				idNumber = idNumber[-6..-1].toUpperCase()
+
+			// usually in form of bridge name followed by (ip), i.e. defaults to Philips Hue (192.168.1.2)
+			// replace IP with serial number to make it easier for user to identify
+			def name = body?.device?.friendlyName?.text()
+			def index = name?.indexOf('(')
+			if (index != -1) {
+				name = name.substring(0,index)
+				name += " ($idNumber)"
+			}
+			bridge.value << [name:name, serialNumber:body?.device?.serialNumber?.text(), verified: true]
 		} else {
 			log.error "/description.xml returned a bridge that didn't exist"
 		}

smartapps/smartthings/programmable-thermostat.src/programmable-thermostat.groovy

@@ -0,0 +1,369 @@
+/**
+ *  Programmable Thermostat
+ *
+ *  Copyright 2016 Raymond Ciarcia
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+definition(
+    name: "Programmable Thermostat",
+    namespace: "smartthings",
+    author: "Raymond Ciarcia",
+    description: "A full-featured, easy to use interface for programming your thermostat based on schedule setpoints and mode changes",
+    category: "Convenience",
+    iconUrl: "http://cdn.device-icons.smartthings.com/Home/home1-icn@2x.png",
+    iconX2Url: "http://cdn.device-icons.smartthings.com/Home/home1-icn@2x.png",
+    iconX3Url: "http://cdn.device-icons.smartthings.com/Home/home1-icn@2x.png"
+)
+
+preferences {
+	page(name:"Settings", title:"Settings", uninstall:true, install:true ) {
+		section() {
+			input (name:"thermostat", type: "capability.thermostat", title: "Select thermostat", required: true, multiple: false)
+		}
+    	section ("Scheduled Setpoints") {
+	    	input (name: "son", type: "bool", title: "Run scheduled setpoints", required:true)
+			input (name:"numscheduled", title: "Number of scheduled setpoints", type: "number",refreshAfterSelection: true)
+			href(title: "Schedule Setpoints", page: "ScheduledChanges")
+		}
+    	section ("Mode-Based Setpoints") {
+			input (name: "eon", type: "bool", title: "Run mode-based setpoints", required:true)
+			input (name:"numevent", title: "Number of mode-based setpoints", type: "number",refreshAfterSelection: true)
+			href(title: "Mode-Based Setpoints Setpoints", page: "EventBasedChanges")
+		}
+    	section("Auto Thermostat Mode Control") {
+        	input (name: "auto", type: "enum", title: "Adjust thermostat heating/cooling mode based on current temperature and setpoint", required:true, multiple: false, options: ['Never','When setpoints are executed','Any time']) 
+		}
+    	section("Notifications") {
+			input (name: "snotifications", type: "bool", title: "Notify when scheduled setpoints execute", required:true)
+            input (name: "enotifications", type: "bool", title: "Notify when mode-based setpoints execute", required:true)
+            input (name: "eventlogging", type: "enum", title: "Set the level of event logging in the notification feed", required:true, multiple: false, options: ['None','Normal','Detailed'])
+		}
+       section("Command Acknowledgement Failure Response and Notification") {
+			input (name: "fnotifications", type: "bool", title: "Resend commands not acknowledged by the theromstat and notify after multiple failed attempts.  Increases thermostat reliability but may not be compatible with all thermostats; disable if every command results in a failure notification.", required:true)
+       }
+    }
+    page(name: "ScheduledChanges")
+    page(name: "EventBasedChanges")
+}
+
+def ScheduledChanges() {
+	dynamicPage(name: "ScheduledChanges", uninstall: true, install: false) {
+		for (int i = 1; i <= settings.numscheduled; i++) {
+			section("Scheduled Setpoint $i") {
+				input "stime${i}", "time", title: "At this time:", required: true
+       			input "sheatset${i}", "decimal", title: "Set this heating temperature:", required: true
+        		input "scoolset${i}", "decimal", title: "Set this cooling temperature:", required: true
+        		input "sdays${i}", "enum", title: "Only on these days (no selection is equivalent to selecting all):", required: false, multiple: true, options: ['Monday','Tuesday','Wednesday','Thursday','Friday','Saturday','Sunday']
+        		input "smodes${i}", "mode", title: "Only in these modes (no selection is equivalent to selecting all):", multiple: true, required: false       
+			}
+    	}
+	}
+}
+
+def EventBasedChanges() {
+	dynamicPage(name: "EventBasedChanges", uninstall: true, install: false) {
+		for (int i = 1; i <= settings.numevent; i++) {
+			section("Mode-Based Setpoint $i") {
+				input "emodes${i}", "mode", title: "On transition to this mode:", multiple: false, required: true
+				input "eheatset${i}", "decimal", title: "Set this heating temperature:", required: true
+	    		input "ecoolset${i}", "decimal", title: "Set this cooling temperature:", required: true
+                input "edays${i}", "enum", title: "Only on these days (no selection is equivalent to selecting all):", required: false, multiple: true, options: ['Monday','Tuesday','Wednesday','Thursday','Friday','Saturday','Sunday']
+			}
+		}
+	}
+}
+
+
+//---- INSTALL AND UPDATE
+
+def installed() {initialize()}
+
+def updated() {initialize()}
+
+def initialize() {
+	try {
+    	unschedule()
+    } catch(e) {
+    	try {
+       		unschedule(SchedulerIntegrityChecker)
+    		unschedule(MidnightRunner)        
+        } catch(ev) {}    
+    }    
+    
+    unsubscribe()
+    subscribe(settings.thermostat, "temperature", tempChangeHandler)
+    if ((settings.numevent > 0) && (settings.eon)) {subscribe(location, modeChangeHandler)}
+
+    state.scheduledindex = 0
+    state.pendingindex = 0
+	state.dayoflastrun = TodayAsString()
+    state.timeoflastevent = now()
+    state.nextscheduledtime = now()
+    state.failedcommandcount = 0
+    state.schedulestring = ""
+    state.checkcommandstring = ""
+    
+    state.eventlogging = 0
+    if (settings.eventlogging == "Normal"){state.notificationlevel = 1}
+    if (settings.eventlogging == "Detailed"){state.notificationlevel = 2}
+    
+    if ((settings.numscheduled > 0) && (settings.son)) {
+    	schedule(timeToday("2015-08-04T00:00:00.000",location.timeZone), MidnightRunner)
+    	SchedulerFunction()
+    }
+	log.debug "Programmable Thermostat: successfully initialized."
+    if (state.notificationlevel>0) {sendNotificationEvent("Programmable Thermostat successfully initialized.$state.schedulestring.")}
+	state.schedulestring = ""
+}
+
+//---- SCHEDULING FUNCTIONS
+
+//At midnight, runs scheduler function to set the first scheduled event of the new day
+def MidnightRunner() {
+	state.dayoflastrun = TodayAsString()
+    state.timeoflastevent = now()
+    SchedulerFunction()
+    def i = SearchSchedulePoints("2015-08-04T00:00:00.000")
+    if (i>0) {ThermostatCommander(settings."sheatset${i}", settings."scoolset${i}", settings.snotifications, "per scheduled setpoint.$state.schedulestring")}
+}
+
+//Determines and schedules the next scheduled setpoint
+def SchedulerFunction(){
+	def mindiff = 60*60*1000*24*7 
+    def timeNow = now()
+   	def todaystring = TodayAsString()
+	for (int i = 1; i <= settings.numscheduled; i++) {
+        def ScheduledTime = timeToday(settings["stime$i"],location.timeZone)
+        def ScheduledDays = settings["sdays$i"]
+        if (ScheduledDays == null) {ScheduledDays = TodayAsString()}
+ 		if (ScheduledTime != null) {
+        	if ((ScheduledTime.time >= timeNow) && (ScheduledDays.contains(TodayAsString())) && (ScheduledTime.time - timeNow < mindiff)){
+                mindiff = ScheduledTime.time - timeNow
+                state.scheduledindex = i
+    		} 
+    	}
+	}
+    if (mindiff < 60*60*1000*24*7) {
+    	int i = state.scheduledindex
+    	def nextrun = timeToday(settings["stime$i"],location.timeZone)
+        state.nextscheduledtime = nextrun.time
+        def nextrunstring = DisplayTime(nextrun)
+        runOnce(nextrun, ScheduleExecuter)
+		if (state.notificationlevel>1) {state.schedulestring=" Next scheduled setpoint for $thermostat.label is today at $nextrunstring"}
+	} else {
+        state.nextscheduledtime = -1
+		if (state.notificationlevel>1) {state.schedulestring=" There are no remaining scheduled setpoints for $thermostat.label today"}
+	}
+	state.timeoflastevent = now()
+}
+
+def SearchSchedulePoints(time) {
+    for (int i = 1; i <= settings.numscheduled; i++) {
+    	def Modes = settings["smodes$i"]
+        if (Modes == null) {Modes = location.mode}
+        def Days = settings["sdays$i"]
+        if (Days == null) {Days = TodayAsString()}
+    	if(timeToday(settings["stime$i"],location.timeZone) == timeToday(time,location.timeZone) && Modes.contains(location.mode) && Days.contains(TodayAsString())) {
+            return i
+        }
+    }
+	return 0
+}
+
+
+//---- EXECUTION FUNCTIONS
+
+//Runs at scheduled setpoints to determine whether a setpoint should be executed; if yes, calls thermostat commander to execute command
+def ScheduleExecuter() {
+	int i = state.scheduledindex
+	SchedulerFunction()
+    state.timeoflastevent = now()
+	def valid = false
+    def Modes = settings["smodes$i"]
+    if (Modes == null) {Modes = location.mode}    
+	if(Modes.contains(location.mode)){
+    	valid = true
+    } else {
+    	i = SearchSchedulePoints(settings["stime$i"]) 
+        if (i > 0) {valid = true}
+	}
+	if (valid) {
+    	state.failedcommandcount = 0
+        state.pendingindex = i
+        ThermostatCommander(settings."sheatset${i}", settings."scoolset${i}", settings.snotifications, "per scheduled setpoint.$state.schedulestring")
+	} else {
+		if (state.notificationlevel>1) {sendNotificationEvent("Scheduled setpoint for $thermostat.label not executed because the current home mode, $location.mode, does not match a setpoint mode.$state.schedulestring.")}
+    }
+    state.schedulestring = ""
+}
+
+//Sends commands to the thermostat
+def ThermostatCommander(hvalue, cvalue, notifications, notificationphrase) { 
+	state.timeoflastevent = now()
+	if((hvalue == null) || (cvalue == null)) {return}
+    if (settings.auto != "Never") {ThermostatModeSetter(hvalue, cvalue, 0)}   
+
+	def notificationstring = "" 
+    state.checkcommandstring = ""
+    def thermMode = thermostat.currentValue("thermostatMode")
+    def name = thermostat.label
+    
+    def currentheatsetpoint = settings.thermostat.currentValue("heatingSetpoint")
+    def currentcoolsetpoint = settings.thermostat.currentValue("coolingSetpoint")  
+
+    if ("$currentcoolsetpoint" != "$cvalue") {state.checkcommandstring = "c"}
+    if ("$currentheatsetpoint" != "$hvalue") {state.checkcommandstring = "h$state.checkcommandstring"}
+    log.debug "Programmable Thermostat: check string is $state.checkcommandstring; values are $currentcoolsetpoint and $currentheatsetpoint"
+
+    def primarysetpoint = hvalue
+    if (thermMode == "cool") {primarysetpoint = cvalue}
+	if (thermMode == "heat" || thermMode == "cool") {notificationstring = "$name set to $primarysetpoint in $thermMode mode $notificationphrase."}
+    else {notificationstring = "$name set to $hvalue / $cvalue $notificationphrase."}
+    
+    if (settings.fnotifications && state.checkcommandstring != "") (runIn(10 + state.failedcommandcount*30, CommandIntegrityChecker))
+
+    if (hvalue!=0) {
+		log.debug "Programmable Thermostat: Heat command set to $hvalue"
+		thermostat.setHeatingSetpoint(hvalue)
+    }
+    if (cvalue!=0) {
+		log.debug "Programmable Thermostat: Cool command set to $cvalue"
+		thermostat.setCoolingSetpoint(cvalue)
+    }
+    if (notifications && state.failedcommandcount==0) {
+    	sendPush(notificationstring)
+    } else if (state.notificationlevel>0 && state.failedcommandcount==0) {
+    	sendNotificationEvent(notificationstring)
+        if (state.checkcommandstring == "" && state.notificationlevel>2) {sendNotificationEvent("$name confirmed that it was already set to $primarysetpoint in $thermMode mode.")}
+    }
+    if (state.checkcommandstring == "") {log.debug "Programmable Thermostat: $name confirmed that it was already set to $primarysetpoint in $thermMode mode"}
+}
+
+//Auto Sets Thermostat Mode
+def ThermostatModeSetter(hvalue, cvalue, notifications) {
+	if (hvalue==0 || cvalue==0) {return}
+    def currentTemp = settings.thermostat.latestValue("temperature")
+    if (currentTemp > cvalue && settings.thermostat.currentValue("thermostatMode") != "cool") {
+		thermostat.cool()
+		if (notifications > 0) {sendNotificationEvent("$thermostat.label mode changed to cooling when temperature reached $currentTemp")}
+	} else if (currentTemp < hvalue && settings.thermostat.currentValue("thermostatMode") != "heat") {
+		thermostat.heat()
+		if (notifications > 0) {sendNotificationEvent("$thermostat.label mode changed to heating when temperature fell to $currentTemp")}
+	}        
+}
+
+
+//---- INTEGRITY CHECKERS
+
+//Determines whether the last scheduled setpoint was executed; if not, reinitializes or sends missed command
+def SchedulerIntegrityChecker() {
+	def i = state.scheduledindex
+	if ((settings.numscheduled == 0) || (settings.son == false)) {return}
+	if (state.dayoflastrun != TodayAsString()) {initialize()}
+}
+
+//Determines whether commands sent to the thermostat have been properly acknowledged; if not, calls thermostat commander to reissue failed command(s)
+def CommandIntegrityChecker() {
+	state.timeoflastevent = now()
+	if (state.pendingindex == 0) {return}
+	def currentheatsetpoint = settings.thermostat.currentValue("heatingSetpoint")
+    def currentcoolsetpoint = settings.thermostat.currentValue("coolingSetpoint")
+	def thermMode = thermostat.currentValue("thermostatMode")
+    def lastheatcommand = IndexLookUp("heat")
+	def lastcoolcommand = IndexLookUp("cool")
+    def failedstring = ""
+    log.debug "Programmable Thermostat: $thermostat.label heating setpoint was commanded to $lastheatcommand and is currently $currentheatsetpoint; cooling setpoint was commanded to $lastcoolcommand and is currently $currentcoolsetpoint"    
+  
+	if (("$currentheatsetpoint" == "$lastheatcommand") && ("$currentcoolsetpoint" == "$lastcoolcommand")) {return}
+    
+    state.failedcommandcount = state.failedcommandcount + 1
+	if ("$currentheatsetpoint" != "$lastheatcommand" && "$currentcoolsetpoint" != "$lastcoolcommand" && state.checkcommandstring == "hc") {
+		failedstring = "$thermostat.label is non-responsive to setpoint commands."
+		ThermostatCommander(lastheatcommand, lastcoolcommand, false, "")
+	} else if ("$currentheatsetpoint" != "$lastheatcommand" && (state.checkcommandstring == "hc" || state.checkcommandstring == "h")) {
+		if (thermMode == "heat") {failedstring = "$thermostat.label is non-responsive to heat setpoint commands."}
+		ThermostatCommander(lastheatcommand, 0, false, "")    
+    } else if ("$currentcoolsetpoint" != "$lastcoolcommand" && (state.checkcommandstring == "hc" || state.checkcommandstring == "c")) {
+		if (thermMode == "cool") failedstring = "$thermostat.label is non-responsive to cool setpoint commands."
+		ThermostatCommander(0, lastcoolcommand, false, "")
+	}
+
+	if (state.failedcommandcount == 4) {
+		state.failedcommandcount = 0
+        state.pendingindex = 0
+    	if (failedstring != "") {sendPush(failedstring)}
+	}
+}
+
+
+//---- EVENT HANDLERS
+
+//Runs every time a mode change is detected.  Used to execute mode-based setpoints; also used to trigger schedule integrity checks in case all scheduled functions have failed
+def modeChangeHandler(evt) {
+    if (state.notificationlevel>2) {sendNotificationEvent("Programmable Thermostat detected home mode change to $evt.value.")}	
+	for (int i = 1; i <= settings.numevent; i++) {
+        def ScheduledDays = settings["edays$i"]
+        if (ScheduledDays == null) {ScheduledDays = TodayAsString()}
+        if ((evt.value == settings["emodes$i"]) && (ScheduledDays.contains(TodayAsString()))) {
+			state.failedcommandcount = 0
+            state.pendingindex = -i
+            ThermostatCommander(settings."eheatset${i}", settings."ecoolset${i}", settings.enotifications, "with change to $evt.value")
+        	i = settings.numevent + 1
+        }        
+	}
+	SchedulerIntegrityChecker()
+}
+
+//Runs every time the temperature reported by the thermostat changes.  Used to trigger schedule integrity checks in case all scheduled functions have failed.
+def tempChangeHandler(evt) {
+	SchedulerIntegrityChecker()
+    if (settings.auto == "Any time") {ThermostatModeSetter(settings.thermostat.latestValue("heatingSetpoint"), settings.thermostat.latestValue("coolingSetpoint"), state.notificationlevel)}
+}
+
+//---- OTHER
+
+//Returns the setpoint temperature associated with a settings index
+def IndexLookUp(mode) {
+	def result = 0
+	if (mode == "cool") {
+		if (state.pendingindex > 0) {result = settings."scoolset${state.pendingindex}"}
+    	if (state.pendingindex < 0) {result = settings."ecoolset${-state.pendingindex}"}
+	} else if (mode == "heat") {
+		if (state.pendingindex > 0) {result = settings."sheatset${state.pendingindex}"}
+   		if (state.pendingindex < 0) {result = settings."eheatset${-state.pendingindex}"}
+    }
+	return result
+}
+
+//Returns the current day of the week as a string
+def TodayAsString() {
+	return (new Date(now())).format("EEEEEEE", location.timeZone)
+}
+
+//Returns time as a string in 12 hour format
+def DisplayTime(time) {
+	def tz = location.timeZone
+    def hour = time.format("H",tz)
+	def min = time.format("m",tz)
+	def sec = time.format("s",tz)
+	def ampm = "am"        
+	def hournum = hour.toInteger()
+	def minnum = min.toInteger()
+	if (hournum == 0) {hournum = 12}
+	if (hournum > 12) {
+		hournum = hournum - 12
+		ampm = "pm"
+	}   
+	if (minnum < 10) {min = "0$min"}   
+	return "$hournum:$min $ampm"
+}

smartapps/smartthings/ubi.src/ubi.groovy

@@ -107,8 +107,8 @@ mappings {
 	path("/locks") {
 		action: [
 			GET: "listLocks",
-			PUT: "updateLock",
-			POST: "updateLock"
+			PUT: "updateLocks",
+			POST: "updateLocks"
 		]
 	}
 	path("/locks/:id") {
@@ -442,31 +442,87 @@ def executePhrase() {
 }
 
 private void updateAll(devices) {
+	def type = params.param1
 	def command = request.JSON?.command
-	if (command)
-	{
-		command = command.toLowerCase()
-		devices."$command"()
+	if (!devices) {
+		httpError(404, "Devices not found")
+	}
+	if (command){
+		devices.each { device ->
+			executeCommand(device, type, command)
+		}
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
-	//def command = request.JSON?.command
-	def command = params.command
-	if (command)
-	{
-		command = command.toLowerCase()
-		def device = devices.find { it.id == params.id }
-		if (!device)
-		{
+	def type = params.param1
+	def command = request.JSON?.command
+	def device = devices?.find { it.id == params.id }
+
+	if (!device) {
 			httpError(404, "Device not found")
-		}
-		else
-		{
-			device."$command"()
-		}
 	}
+
+	if (command) {
+		executeCommand(device, type, command)
+	}
+}
+
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, deviceType, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(deviceType)
+	if (capabilityCommands[currentDeviceCapability]) {
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
+	}
+}
+
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(type) {
+    switch(type) {
+		case "switches":
+			return "Switch"
+		case "locks":
+			return "Lock"
+		default:
+			return type
+	}
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
+/**
+ * Validates and executes the command
+ * on the device or devices
+ */
+def executeCommand(device, type, command) {
+	if (validateCommand(device, type, command)) {
+		device."$command"()
+	} else {
+		httpError(403, "Access denied. This command is not supported by current capability.")
+	}	
 }
 
 private show(devices, type) {