MSA-1321: Little SmartApp to flash the lights if the multi sensor detects acceleration at the door. Very useful for deaf people like myself to ensure we don't miss the door.

DVCSMP-1795 Philips Hue: Add support for Hue Ambience bulb

devicetypes/smartthings/-.src/-.groovy

@@ -1,294 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "재부재 센서", namespace: "smartthings", author: "김성훈") {
-		capability "Tone"
-		capability "Actuator"
-		capability "Signal Strength"
-		capability "Presence Sensor"
-		capability "Sensor"
-		capability "Battery"
-
-		fingerprint profileId: "FC01", deviceId: "019A"
-		fingerprint profileId: "FC01", deviceId: "0131", inClusters: "0000,0003", outClusters: "0003"
-		fingerprint profileId: "FC01", deviceId: "0131", inClusters: "0000", outClusters: "0006"
-	}
-
-	simulator {
-		status "present": "presence: 1"
-		status "not present": "presence: 0"
-		status "battery": "battery: 27, batteryDivisor: 0A, rssi: 100, lqi: 64"
-	}
-
-	preferences {
-		section {
-			image(name: 'educationalcontent', multiple: true, images: [
-				"http://cdn.device-gse.smartthings.com/Arrival/Arrival1.jpg",
-				"http://cdn.device-gse.smartthings.com/Arrival/Arrival2.jpg"
-				])
-		}
-	}
-
-	tiles {
-		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
-			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ebeef2"
-		}
-		standardTile("beep", "device.beep", decoration: "flat") {
-			state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"
-		}
-		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
-			state "battery", label:'${currentValue}% battery', unit:""/*, backgroundColors:[
-				[value: 5, color: "#BC2323"],
-				[value: 10, color: "#D04E00"],
-				[value: 15, color: "#F1D801"],
-				[value: 16, color: "#FFFFFF"]
-			]*/
-		}
-		/*
-		valueTile("lqi", "device.lqi", decoration: "flat", inactiveLabel: false) {
-			state "lqi", label:'${currentValue}% signal', unit:""
-		}
-		*/
-		
-		main "presence"
-		details(["presence", "beep", "battery"/*, "lqi"*/])
-	}
-}
-
-def beep() {
-	/*
-	You can make the speaker turn on for 0.5-second beeps by sending some CLI commands:
-
-		Command: send raw, wait 7, send raw, wait 7, send raw
-		Future: new packet type "st.beep"
-
-		raw 0xFC05 {15 0A 11 00 00 15 01}
-		send 0x2F7F 2 2
-
-	where "0xABCD" is the node ID of the Smart Tag, everything else above is a constant. Except
-	the "15 01" at the end of the first raw command, that sets the speaker's period (reciprocal
-	of frequency). You can play with this value up or down to experiment with loudness as the
-	loudness will be strongly dependent upon frequency and the enclosure that it's in. Note that
-	"15 01" represents the hex number 0x0115 so a lower frequency is "16 01" (longer period) and
-	a higher frequency is "14 01" (shorter period). Note that since the tag only checks its parent
-	for messages every 5 seconds (while at rest) or every 3 seconds (while in motion) it will take
-	up to this long from the time you send the message to the time you hear a sound.
-	*/
-
-	[
-		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}"
-	]
-}
-
-def parse(String description) {
-	def results
-	if (isBatteryMessage(description)) {
-		results = parseBatteryMessage(description)
-	}
-	else {
-		results = parsePresenceMessage(description)
-	}
-
-	log.debug "Parse returned $results.descriptionText"
-	results
-}
-
-private Map parsePresenceMessage(String description) {
-	def name = parseName(description)
-	def value = parseValue(description)
-	def linkText = getLinkText(device)
-	def descriptionText = parseDescriptionText(linkText, value, description)
-	def handlerName = getState(value)
-	def isStateChange = isStateChange(device, name, value)
-
-	def results = [
-		name: name,
-		value: value,
-		unit: null,
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: handlerName,
-		isStateChange: isStateChange,
-		displayed: displayed(description, isStateChange)
-	]
-
-	results
-}
-
-private String parseName(String description) {
-	if (description?.startsWith("presence: ")) {
-		return "presence"
-	}
-	null
-}
-
-private String parseValue(String description) {
-	if (description?.startsWith("presence: "))
-	{
-		if (description?.endsWith("1"))
-		{
-			return "present"
-		}
-		else if (description?.endsWith("0"))
-		{
-			return "not present"
-		}
-	}
-
-	description
-}
-
-private parseDescriptionText(String linkText, String value, String description) {
-	switch(value) {
-		case "present": return "$linkText has arrived"
-		case "not present": return "$linkText has left"
-		default: return value
-	}
-}
-
-private getState(String value) {
-	def state = value
-	if (value == "present") {
-		state = "arrived"
-	}
-	else if (value == "not present") {
-		state = "left"
-	}
-
-	state
-}
-
-private Boolean isBatteryMessage(String description) {
-	// "raw:36EF1C, dni:36EF, battery:1B, rssi:, lqi:"
-	description ==~ /.*battery:.*rssi:.*lqi:.*/
-}
-
-private List parseBatteryMessage(String description) {
-	def results = []
-	def parts = description.split(',')
-	parts.each { part ->
-		part = part.trim()
-		if (part.startsWith('battery:')) {
-			def batteryResult = getBatteryResult(part, description)
-			if (batteryResult) {
-				results << batteryResult
-			}
-		}
-		else if (part.startsWith('rssi:')) {
-			def rssiResult = getRssiResult(part, description)
-			if (rssiResult) {
-				results << rssiResult
-			}
-		}
-		else if (part.startsWith('lqi:')) {
-			def lqiResult = getLqiResult(part, description)
-			if (lqiResult) {
-				results << lqiResult
-			}
-		}
-	}
-
-	results
-}
-
-private getBatteryResult(part, description) {
-	def batteryDivisor = description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"} ? description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"}.split(":")[1].trim() : null
-	def name = "battery"
-	def value = zigbee.parseSmartThingsBatteryValue(part, batteryDivisor)
-	def unit = "%"
-	def linkText = getLinkText(device)
-	def descriptionText = "$linkText battery was ${value}${unit}"
-	def isStateChange = isStateChange(device, name, value)
-
-	[
-		name: name,
-		value: value,
-		unit: unit,
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: name,
-		isStateChange: isStateChange,
-		//displayed: displayed(description, isStateChange)
-		displayed: false
-	]
-}
-
-private getRssiResult(part, description) {
-	def name = "rssi"
-	def parts = part.split(":")
-	if (parts.size() != 2) return null
-
-	def valueString = parts[1].trim()
-	def valueInt = Integer.parseInt(valueString, 16)
-	def value = (valueInt - 128).toString()
-	def linkText = getLinkText(device)
-	def descriptionText = "$linkText was $value dBm"
-	def isStateChange = isStateChange(device, name, value)
-
-	[
-		name: name,
-		value: value,
-		unit: "dBm",
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: null,
-		isStateChange: isStateChange,
-		//displayed: displayed(description, isStateChange)
-		displayed: false
-	]
-}
-
-/**
- * Use LQI (Link Quality Indicator) as a measure of signal strength. The values
- * are 0 to 255 (0x00 to 0xFF) and higher values represent higher signal
- * strength. Return as a percentage of 255.
- *
- * Note: To make the signal strength indicator more accurate, we could combine
- * LQI with RSSI.
- */
-private getLqiResult(part, description) {
-	def name = "lqi"
-	def parts = part.split(":")
-	if (parts.size() != 2) return null
-
-	def valueString = parts[1].trim()
-	def valueInt = Integer.parseInt(valueString, 16)
-	def percentageOf = 255
-	def value = Math.round((valueInt / percentageOf * 100)).toString()
-	def unit = "%"
-	def linkText = getLinkText(device)
-	def descriptionText = "$linkText Signal (LQI) was ${value}${unit}"
-	def isStateChange = isStateChange(device, name, value)
-
-	[
-		name: name,
-		value: value,
-		unit: unit,
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: null,
-		isStateChange: isStateChange,
-		//displayed: displayed(description, isStateChange)
-		displayed: false
-	]
-}

devicetypes/smartthings/hue-white-ambiance-bulb/hue-white-ambiance-bulb.groovy

@@ -0,0 +1,110 @@
+/**
+ *  Hue White Ambiance Bulb
+ *
+ *  Philips Hue Type "Color Temperature Light"
+ *
+ *  Author: SmartThings
+ */
+
+// for the UI
+metadata {
+    // Automatically generated. Make future change here.
+    definition (name: "Hue White Ambiance Bulb", namespace: "smartthings", author: "SmartThings") {
+        capability "Switch Level"
+        capability "Actuator"
+        capability "Color Temperature"
+        capability "Switch"
+        capability "Refresh"
+
+        command "refresh"
+    }
+
+    simulator {
+        // TODO: define status and reply messages here
+    }
+
+    tiles (scale: 2){
+        multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+        standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["rich-control"])
+        details(["rich-control", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+// parse events into attributes
+def parse(description) {
+    log.debug "parse() - $description"
+    def results = []
+
+    def map = description
+    if (description instanceof String)  {
+        log.debug "Hue Ambience Bulb stringToMap - ${map}"
+        map = stringToMap(description)
+    }
+
+    if (map?.name && map?.value) {
+        results << createEvent(name: "${map?.name}", value: "${map?.value}")
+    }
+    results
+}
+
+// handle commands
+void on() {
+    log.trace parent.on(this)
+    sendEvent(name: "switch", value: "on")
+}
+
+void off() {
+    log.trace parent.off(this)
+    sendEvent(name: "switch", value: "off")
+}
+
+void setLevel(percent) {
+    log.debug "Executing 'setLevel'"
+    if (percent != null && percent >= 0 && percent <= 100) {
+        parent.setLevel(this, percent)
+        sendEvent(name: "level", value: percent)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "$percent is not 0-100"
+    }
+}
+
+void setColorTemperature(value) {
+    if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "Invalid color temperature"
+    }
+}
+
+void refresh() {
+    log.debug "Executing 'refresh'"
+    parent.manualRefresh()
+}
+

smartapps/com-stormwave-doorknock/lights-flash-on-door-knock.src/lights-flash-on-door-knock.groovy

@@ -0,0 +1,170 @@
+/**
+ *  Lights Flash on Door Knock
+ *
+ *  Copyright 2016 Andrew Cornforth
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Lights Flash on Door Knock",
+    namespace: "com.stormwave.doorknock",
+    author: "Andrew Cornforth",
+    description: "Flashes lights when activity is noticed at the door.",
+    category: "Safety & Security",
+    iconUrl: "http://cdn.device-icons.smartthings.com/Lighting/light10-icn.png",
+    iconX2Url: "http://cdn.device-icons.smartthings.com/Lighting/light10-icn@2x.png",
+    iconX3Url: "http://cdn.device-icons.smartthings.com/Lighting/light10-icn@2x.png")
+
+
+preferences {
+	section("Things") 
+    {
+		input "doorsensor", "capability.accelerationSensor", title: "Door Sensor", required: true, multiple: true
+        input "lights", "capability.switch", title:"Lights", required:true, multiple:true
+	}
+    section("Settings")
+    {
+    	input "numFlashes", "number", title:"Number of Flashes", required:true, defaultValue:"5"
+    	input "onFor", "number", title:"Time On (ms)", required:true, defaultValue:"1000"
+    	input "offFor", "number", title:"Time Off (ms)", required:true, defaultValue:"1000"
+	}
+    section("Only If")
+    {
+    	input "switcheson", "capability.switch", title:"Switches Are On", required:false, multiple:true
+    	input "switchesoff", "capability.switch", title:"Switches Are Off", required:false, multiple:true
+    	input "sleepon", "capability.sleepSensor", title:"Thing Is Asleep", required:false, multiple:true
+    	input "sleepoff", "capability.sleepSensor", title:"Thing Is Awake", required:false, multiple:true
+    }
+    section("Or If")
+    {
+    	input "or_switcheson", "capability.switch", title:"Switches Are On", required:false, multiple:true
+    	input "or_switchesoff", "capability.switch", title:"Switches Are Off", required:false, multiple:true
+    	input "or_sleepon", "capability.sleepSensor", title:"Thing Is Asleep", required:false, multiple:true
+    	input "or_sleepoff", "capability.sleepSensor", title:"Thing Is Awake", required:false, multiple:true
+    }
+}
+
+def flashLights()
+{
+    lights.each 
+    { 
+        light ->
+            def delay = 0L
+            if (light.latestValue("switch")=="on")
+            {
+                numFlashes.times 
+                {
+                    light.off(delay: delay)
+                    delay += offFor
+                    light.on(delay: delay)
+                    delay += onFor
+                }
+            }
+	        else
+            {
+                numFlashes.times 
+                {
+                    light.on(delay: delay)
+                    delay += onFor
+                    light.off(delay: delay)
+                    delay += offFor
+                }
+			}
+    }
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def unsubcribe()
+{
+	unsubscribe(doorsensor)
+}
+
+def initialize() 
+{
+	subscribe(doorsensor, "acceleration", activityHandler)
+}
+
+def activityHandler(evt) 
+{
+	if (evt.value=="active")
+    {
+    	// Check conditions
+        def valid = true
+        switcheson.each 
+        { 
+            device ->
+            	if (device.latestValue("switch")=="off") { valid = false; }
+        }
+        if (valid)
+            switchesoff.each 
+            { 
+                device ->
+                    if (device.latestValue("switch")=="on") { valid = false; }
+            }
+        if (valid)
+            sleepon.each 
+            { 
+                device ->
+                    if (device.latestValue("sleeping")=="not sleeping") { valid = false; }
+            }
+        if (valid)
+            sleepoff.each 
+            { 
+                device ->
+                    if (device.latestValue("sleeping")=="sleeping") { valid = false; }
+            }
+            
+        // Check for "or" values if failed first step
+		if (!valid)
+        {
+        	valid = true
+            or_switcheson.each 
+            { 
+                device ->
+                    if (device.latestValue("switch")=="off") { valid = false; }
+            }
+            if (valid)
+                or_switchesoff.each 
+                { 
+                    device ->
+                        if (device.latestValue("switch")=="on") { valid = false; }
+                }
+            if (valid)
+                or_sleepon.each 
+                { 
+                    device ->
+                        if (device.latestValue("sleeping")=="not sleeping") { valid = false; }
+                }
+            if (valid)
+                or_sleepoff.each 
+                { 
+                    device ->
+                        if (device.latestValue("sleeping")=="sleeping") { valid = false; }
+                }
+		}
+        if (valid)
+        {
+    		flashLights()
+        }
+	}
+}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -323,6 +323,8 @@ private getDeviceType(hueType) {
 		return "Hue Bulb"
 	else if (hueType?.equalsIgnoreCase("Color Light"))
 		return "Hue Bloom"
+	else if (hueType?.equalsIgnoreCase("Color Temperature Light"))
+		return "Hue White Ambiance Bulb"
 	else
 		return null
 }

smartapps/smartthings/turn-it-on-for-1-minutes.src/turn-it-on-for-1-minutes.groovy

@@ -1,56 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Turn It On For 5 Minutes
- *  Turn on a switch when a contact sensor opens and then turn it back off 5 minutes later.
- *
- *  Author: SmartThings
- */
-definition(
-    name: "Turn It On For 1 Minutes",
-    namespace: "smartthings",
-    author: "mr.kim",
-    description: "When a SmartSense Multi is opened, a switch will be turned on, and then turned off after 5 minutes.",
-    category: "Safety & Security",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Meta/light_contact-outlet.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Meta/light_contact-outlet@2x.png"
-)
-
-preferences {
-	section("When it opens..."){
-		input "contact1", "capability.contactSensor"
-	}
-	section("Turn on a switch for 5 minutes..."){
-		input "switch1", "capability.switch"
-	}
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	subscribe(contact1, "contact.open", contactOpenHandler)
-}
-
-def updated(settings) {
-	log.debug "Updated with settings: ${settings}"
-	unsubscribe()
-	subscribe(contact1, "contact.open", contactOpenHandler)
-}
-
-def contactOpenHandler(evt) {
-	switch1.on()
-	def fiveMinuteDelay = 60 * 1
-	runIn(fiveMinuteDelay, turnOffSwitch)
-}
-
-def turnOffSwitch() {
-	switch1.off()
-}